[gcc r12-3495] c++: implement C++17 hardware interference size

[gcc r12-3495] c++: implement C++17 hardware interference size

[Jason Merrill]

https://gcc.gnu.org/g:76b75018b3d053a890ebe155e47814de14b3c9fb

commit r12-3495-g76b75018b3d053a890ebe155e47814de14b3c9fb
Author: Jason Merrill <jason@redhat.com>
Date:   Thu Jul 15 15:30:17 2021 -0400

    c++: implement C++17 hardware interference size
    
    The last missing piece of the C++17 standard library is the hardware
    intereference size constants.  Much of the delay in implementing these has
    been due to uncertainty about what the right values are, and even whether
    there is a single constant value that is suitable; the destructive
    interference size is intended to be used in structure layout, so program
    ABIs will depend on it.
    
    In principle, both of these values should be the same as the target's L1
    cache line size.  When compiling for a generic target that is intended to
    support a range of target CPUs with different cache line sizes, the
    constructive size should probably be the minimum size, and the destructive
    size the maximum, unless you are constrained by ABI compatibility with
    previous code.
    
    From discussion on gcc-patches, I've come to the conclusion that the
    solution to the difficulty of choosing stable values is to give up on it,
    and instead encourage only uses where ABI stability is unimportant: in
    particular, uses where the ABI is shared at most between translation units
    built at the same time with the same flags.
    
    To that end, I've added a warning for any use of the constant value of
    std::hardware_destructive_interference_size in a header or module export.
    Appropriate uses within a project can disable the warning.
    
    A previous iteration of this patch included an -finterference-tune flag to
    make the value vary with -mtune; this iteration makes that the default
    behavior, which should be appropriate for all reasonable uses of the
    variable.  The previous default of "stable-ish" seems to me likely to have
    been more of an attractive nuisance; since we can't promise actual
    stability, we should instead make proper uses more convenient.
    
    JF Bastien's implementation proposal is summarized at
    https://github.com/itanium-cxx-abi/cxx-abi/issues/74
    
    I implement this by adding new --params for the two sizes.  Targets can
    override these values in targetm.target_option.override() to support a range
    of values for the generic target; otherwise, both will default to the L1
    cache line size.
    
    64 bytes still seems correct for all x86.
    
    I'm not sure why he proposed 64/64 for generic 32-bit ARM, since the Cortex
    A9 has a 32-byte cache line, so I'd think 32/64 would make more sense.
    
    He proposed 64/128 for generic AArch64, but since the A64FX now has a 256B
    cache line, I've changed that to 64/256.
    
    Other arch maintainers are invited to set ranges for their generic targets
    if that seems better than using the default cache line size for both values.
    
    With the above choice to reject stability as a goal, getting these values
    "right" is now just a matter of what we want the default optimization to be,
    and we can feel free to adjust them as CPUs with different cache lines
    become more and less common.
    
    gcc/ChangeLog:
    
            * params.opt: Add destructive-interference-size and
            constructive-interference-size.
            * doc/invoke.texi: Document them.
            * config/aarch64/aarch64.c (aarch64_override_options_internal):
            Set them.
            * config/arm/arm.c (arm_option_override): Set them.
            * config/i386/i386-options.c (ix86_option_override_internal):
            Set them.
    
    gcc/c-family/ChangeLog:
    
            * c.opt: Add -Winterference-size.
            * c-cppbuiltin.c (cpp_atomic_builtins): Add __GCC_DESTRUCTIVE_SIZE
            and __GCC_CONSTRUCTIVE_SIZE.
    
    gcc/cp/ChangeLog:
    
            * constexpr.c (maybe_warn_about_constant_value):
            Complain about std::hardware_destructive_interference_size.
            (cxx_eval_constant_expression): Call it.
            * decl.c (cxx_init_decl_processing): Check
            --param *-interference-size values.
    
    libstdc++-v3/ChangeLog:
    
            * include/std/version: Define __cpp_lib_hardware_interference_size.
            * libsupc++/new: Define hardware interference size variables.
    
    gcc/testsuite/ChangeLog:
    
            * g++.dg/warn/Winterference.H: New file.
            * g++.dg/warn/Winterference.C: New test.
            * g++.target/aarch64/interference.C: New test.
            * g++.target/arm/interference.C: New test.
            * g++.target/i386/interference.C: New test.

Diff:
---
 gcc/doc/invoke.texi                             | 65 +++++++++++++++++++++++++
 gcc/c-family/c.opt                              |  5 ++
 gcc/params.opt                                  | 16 ++++++
 gcc/c-family/c-cppbuiltin.c                     | 14 ++++++
 gcc/config/aarch64/aarch64.c                    | 22 +++++++++
 gcc/config/arm/arm.c                            | 22 +++++++++
 gcc/config/i386/i386-options.c                  |  6 +++
 gcc/cp/constexpr.c                              | 33 +++++++++++++
 gcc/cp/decl.c                                   | 32 ++++++++++++
 gcc/testsuite/g++.dg/warn/Winterference-2.C     | 14 ++++++
 gcc/testsuite/g++.dg/warn/Winterference.C       |  6 +++
 gcc/testsuite/g++.target/aarch64/interference.C |  9 ++++
 gcc/testsuite/g++.target/arm/interference.C     |  9 ++++
 gcc/testsuite/g++.target/i386/interference.C    |  8 +++
 gcc/testsuite/g++.dg/warn/Winterference.H       |  7 +++
 libstdc++-v3/include/std/version                |  3 ++
 libstdc++-v3/libsupc++/new                      | 10 +++-
 17 files changed, 279 insertions(+), 2 deletions(-)

diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 23cc68f92b5..78cfc100ac2 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -9018,6 +9018,43 @@ that has already been done in the current function.  Therefore,
 seemingly insignificant changes in the source program can cause the
 warnings produced by @option{-Winline} to appear or disappear.
 
+@item -Winterference-size
+@opindex Winterference-size
+Warn about use of C++17 @code{std::hardware_destructive_interference_size}
+without specifying its value with @option{--param destructive-interference-size}.
+Also warn about questionable values for that option.
+
+This variable is intended to be used for controlling class layout, to
+avoid false sharing in concurrent code:
+
+@smallexample
+struct independent_fields @{
+  alignas(std::hardware_destructive_interference_size) std::atomic<int> one;
+  alignas(std::hardware_destructive_interference_size) std::atomic<int> two;
+@};
+@end smallexample
+
+Here @samp{one} and @samp{two} are intended to be far enough apart
+that stores to one won't require accesses to the other to reload the
+cache line.
+
+By default, @option{--param destructive-interference-size} and
+@option{--param constructive-interference-size} are set based on the
+current @option{-mtune} option, typically to the L1 cache line size
+for the particular target CPU, sometimes to a range if tuning for a
+generic target.  So all translation units that depend on ABI
+compatibility for the use of these variables must be compiled with
+the same @option{-mtune} (or @option{-mcpu}).
+
+If ABI stability is important, such as if the use is in a header for a
+library, you should probably not use the hardware interference size
+variables at all.  Alternatively, you can force a particular value
+with @option{--param}.
+
+If you are confident that your use of the variable does not affect ABI
+outside a single build of your project, you can turn off the warning
+with @option{-Wno-interference-size}.
+
 @item -Wint-in-bool-context
 @opindex Wint-in-bool-context
 @opindex Wno-int-in-bool-context
@@ -13938,6 +13975,34 @@ prefetch hints can be issued for any constant stride.
 
 This setting is only useful for strides that are known and constant.
 
+@item destructive-interference-size
+@item constructive-interference-size
+The values for the C++17 variables
+@code{std::hardware_destructive_interference_size} and
+@code{std::hardware_constructive_interference_size}.  The destructive
+interference size is the minimum recommended offset between two
+independent concurrently-accessed objects; the constructive
+interference size is the maximum recommended size of contiguous memory
+accessed together.  Typically both will be the size of an L1 cache
+line for the target, in bytes.  For a generic target covering a range of L1
+cache line sizes, typically the constructive interference size will be
+the small end of the range and the destructive size will be the large
+end.
+
+The destructive interference size is intended to be used for layout,
+and thus has ABI impact.  The default value is not expected to be
+stable, and on some targets varies with @option{-mtune}, so use of
+this variable in a context where ABI stability is important, such as
+the public interface of a library, is strongly discouraged; if it is
+used in that context, users can stabilize the value using this
+option.
+
+The constructive interference size is less sensitive, as it is
+typically only used in a @samp{static_assert} to make sure that a type
+fits within a cache line.
+
+See also @option{-Winterference-size}.
+
 @item loop-interchange-max-num-stmts
 The maximum number of stmts in a loop to be interchanged.
 
diff --git a/gcc/c-family/c.opt b/gcc/c-family/c.opt
index c5fe90003f2..9c151d19870 100644
--- a/gcc/c-family/c.opt
+++ b/gcc/c-family/c.opt
@@ -722,6 +722,11 @@ Winit-list-lifetime
 C++ ObjC++ Var(warn_init_list) Warning Init(1)
 Warn about uses of std::initializer_list that can result in dangling pointers.
 
+Winterference-size
+C++ ObjC++ Var(warn_interference_size) Warning Init(1)
+Warn about nonsensical values of --param destructive-interference-size or
+constructive-interference-size.
+
 Wimplicit
 C ObjC Var(warn_implicit) Warning LangEnabledBy(C ObjC,Wall)
 Warn about implicit declarations.
diff --git a/gcc/params.opt b/gcc/params.opt
index 3a701e22c46..658ca028851 100644
--- a/gcc/params.opt
+++ b/gcc/params.opt
@@ -361,6 +361,22 @@ The maximum code size growth ratio when expanding into a jump table (in percent)
 Common Joined UInteger Var(param_l1_cache_line_size) Init(32) Param Optimization
 The size of L1 cache line.
 
+-param=destructive-interference-size=
+Common Joined UInteger Var(param_destruct_interfere_size) Init(0) Param Optimization
+The minimum recommended offset between two concurrently-accessed objects to
+avoid additional performance degradation due to contention introduced by the
+implementation.  Typically the L1 cache line size, but can be larger to
+accommodate a variety of target processors with different cache line sizes.
+C++17 code might use this value in structure layout, but is strongly
+discouraged from doing so in public ABIs.
+
+-param=constructive-interference-size=
+Common Joined UInteger Var(param_construct_interfere_size) Init(0) Param Optimization
+The maximum recommended size of contiguous memory occupied by two objects
+accessed with temporal locality by concurrent threads.  Typically the L1 cache
+line size, but can be smaller to accommodate a variety of target processors with
+different cache line sizes.
+
 -param=l1-cache-size=
 Common Joined UInteger Var(param_l1_cache_size) Init(64) Param Optimization
 The size of L1 cache.
diff --git a/gcc/c-family/c-cppbuiltin.c b/gcc/c-family/c-cppbuiltin.c
index 48cbefd8bf8..ce88e707127 100644
--- a/gcc/c-family/c-cppbuiltin.c
+++ b/gcc/c-family/c-cppbuiltin.c
@@ -741,6 +741,20 @@ cpp_atomic_builtins (cpp_reader *pfile)
   builtin_define_with_int_value ("__GCC_ATOMIC_TEST_AND_SET_TRUEVAL",
 				 targetm.atomic_test_and_set_trueval);
 
+  /* Macros for C++17 hardware interference size constants.  Either both or
+     neither should be set.  */
+  gcc_assert (!param_destruct_interfere_size
+	      == !param_construct_interfere_size);
+  if (param_destruct_interfere_size)
+    {
+      /* FIXME The way of communicating these values to the library should be
+	 part of the C++ ABI, whether macro or builtin.  */
+      builtin_define_with_int_value ("__GCC_DESTRUCTIVE_SIZE",
+				     param_destruct_interfere_size);
+      builtin_define_with_int_value ("__GCC_CONSTRUCTIVE_SIZE",
+				     param_construct_interfere_size);
+    }
+
   /* ptr_type_node can't be used here since ptr_mode is only set when
      toplev calls backend_init which is not done with -E  or pch.  */
   psize = POINTER_SIZE_UNITS;
diff --git a/gcc/config/aarch64/aarch64.c b/gcc/config/aarch64/aarch64.c
index 30d9a0b7a3d..36519ccc5a5 100644
--- a/gcc/config/aarch64/aarch64.c
+++ b/gcc/config/aarch64/aarch64.c
@@ -16540,6 +16540,28 @@ aarch64_override_options_internal (struct gcc_options *opts)
     SET_OPTION_IF_UNSET (opts, &global_options_set,
 			 param_l1_cache_line_size,
 			 aarch64_tune_params.prefetch->l1_cache_line_size);
+
+  if (aarch64_tune_params.prefetch->l1_cache_line_size >= 0)
+    {
+      SET_OPTION_IF_UNSET (opts, &global_options_set,
+			   param_destruct_interfere_size,
+			   aarch64_tune_params.prefetch->l1_cache_line_size);
+      SET_OPTION_IF_UNSET (opts, &global_options_set,
+			   param_construct_interfere_size,
+			   aarch64_tune_params.prefetch->l1_cache_line_size);
+    }
+  else
+    {
+      /* For a generic AArch64 target, cover the current range of cache line
+	 sizes.  */
+      SET_OPTION_IF_UNSET (opts, &global_options_set,
+			   param_destruct_interfere_size,
+			   256);
+      SET_OPTION_IF_UNSET (opts, &global_options_set,
+			   param_construct_interfere_size,
+			   64);
+    }
+
   if (aarch64_tune_params.prefetch->l2_cache_size >= 0)
     SET_OPTION_IF_UNSET (opts, &global_options_set,
 			 param_l2_cache_size,
diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c
index f1e628253d0..6c6e77fab66 100644
--- a/gcc/config/arm/arm.c
+++ b/gcc/config/arm/arm.c
@@ -3669,6 +3669,28 @@ arm_option_override (void)
     SET_OPTION_IF_UNSET (&global_options, &global_options_set,
 			 param_l1_cache_line_size,
 			 current_tune->prefetch.l1_cache_line_size);
+  if (current_tune->prefetch.l1_cache_line_size >= 0)
+    {
+      SET_OPTION_IF_UNSET (&global_options, &global_options_set,
+			   param_destruct_interfere_size,
+			   current_tune->prefetch.l1_cache_line_size);
+      SET_OPTION_IF_UNSET (&global_options, &global_options_set,
+			   param_construct_interfere_size,
+			   current_tune->prefetch.l1_cache_line_size);
+    }
+  else
+    {
+      /* For a generic ARM target, JF Bastien proposed using 64 for both.  */
+      /* ??? Cortex A9 has a 32-byte cache line, so why not 32 for
+	 constructive?  */
+      /* More recent Cortex chips have a 64-byte cache line, but are marked
+	 ARM_PREFETCH_NOT_BENEFICIAL, so they get these defaults.  */
+      SET_OPTION_IF_UNSET (&global_options, &global_options_set,
+			   param_destruct_interfere_size, 64);
+      SET_OPTION_IF_UNSET (&global_options, &global_options_set,
+			   param_construct_interfere_size, 64);
+    }
+
   if (current_tune->prefetch.l1_cache_size >= 0)
     SET_OPTION_IF_UNSET (&global_options, &global_options_set,
 			 param_l1_cache_size,
diff --git a/gcc/config/i386/i386-options.c b/gcc/config/i386/i386-options.c
index 2cb87cedec0..c0006b3674b 100644
--- a/gcc/config/i386/i386-options.c
+++ b/gcc/config/i386/i386-options.c
@@ -2579,6 +2579,12 @@ ix86_option_override_internal (bool main_args_p,
   SET_OPTION_IF_UNSET (opts, opts_set, param_l2_cache_size,
 		       ix86_tune_cost->l2_cache_size);
 
+  /* 64B is the accepted value for these for all x86.  */
+  SET_OPTION_IF_UNSET (&global_options, &global_options_set,
+		       param_destruct_interfere_size, 64);
+  SET_OPTION_IF_UNSET (&global_options, &global_options_set,
+		       param_construct_interfere_size, 64);
+
   /* Enable sw prefetching at -O3 for CPUS that prefetching is helpful.  */
   if (opts->x_flag_prefetch_loop_arrays < 0
       && HAVE_prefetch
diff --git a/gcc/cp/constexpr.c b/gcc/cp/constexpr.c
index 7772fe62d95..0c2498aee22 100644
--- a/gcc/cp/constexpr.c
+++ b/gcc/cp/constexpr.c
@@ -6075,6 +6075,37 @@ inline_asm_in_constexpr_error (location_t loc)
 	  "%<constexpr%> function in C++20");
 }
 
+/* We're getting the constant value of DECL in a manifestly constant-evaluated
+   context; maybe complain about that.  */
+
+static void
+maybe_warn_about_constant_value (location_t loc, tree decl)
+{
+  static bool explained = false;
+  if (cxx_dialect >= cxx17
+      && warn_interference_size
+      && !global_options_set.x_param_destruct_interfere_size
+      && DECL_CONTEXT (decl) == std_node
+      && id_equal (DECL_NAME (decl), "hardware_destructive_interference_size")
+      && (LOCATION_FILE (input_location) != main_input_filename
+	  || module_exporting_p ())
+      && warning_at (loc, OPT_Winterference_size, "use of %qD", decl)
+      && !explained)
+    {
+      explained = true;
+      inform (loc, "its value can vary between compiler versions or "
+	      "with different %<-mtune%> or %<-mcpu%> flags");
+      inform (loc, "if this use is part of a public ABI, change it to "
+	      "instead use a constant variable you define");
+      inform (loc, "the default value for the current CPU tuning "
+	      "is %d bytes", param_destruct_interfere_size);
+      inform (loc, "you can stabilize this value with %<--param "
+	      "hardware_destructive_interference_size=%d%>, or disable "
+	      "this warning with %<-Wno-interference-size%>",
+	      param_destruct_interfere_size);
+    }
+}
+
 /* Attempt to reduce the expression T to a constant value.
    On failure, issue diagnostic and return error_mark_node.  */
 /* FIXME unify with c_fully_fold */
@@ -6219,6 +6250,8 @@ cxx_eval_constant_expression (const constexpr_ctx *ctx, tree t,
 	      r = *p;
 	      break;
 	    }
+      if (ctx->manifestly_const_eval)
+	maybe_warn_about_constant_value (loc, t);
       if (COMPLETE_TYPE_P (TREE_TYPE (t))
 	  && is_really_empty_class (TREE_TYPE (t), /*ignore_vptr*/false))
 	{
diff --git a/gcc/cp/decl.c b/gcc/cp/decl.c
index bce62ad202a..c2065027369 100644
--- a/gcc/cp/decl.c
+++ b/gcc/cp/decl.c
@@ -4752,6 +4752,38 @@ cxx_init_decl_processing (void)
   /* Show we use EH for cleanups.  */
   if (flag_exceptions)
     using_eh_for_cleanups ();
+
+  /* Check that the hardware interference sizes are at least
+     alignof(max_align_t), as required by the standard.  */
+  const int max_align = max_align_t_align () / BITS_PER_UNIT;
+  if (param_destruct_interfere_size)
+    {
+      if (param_destruct_interfere_size < max_align)
+	error ("%<--param destructive-interference-size=%d%> is less than "
+	       "%d", param_destruct_interfere_size, max_align);
+      else if (param_destruct_interfere_size < param_l1_cache_line_size)
+	warning (OPT_Winterference_size,
+		 "%<--param destructive-interference-size=%d%> "
+		 "is less than %<--param l1-cache-line-size=%d%>",
+		 param_destruct_interfere_size, param_l1_cache_line_size);
+    }
+  else if (param_l1_cache_line_size >= max_align)
+    param_destruct_interfere_size = param_l1_cache_line_size;
+  /* else leave it unset.  */
+
+  if (param_construct_interfere_size)
+    {
+      if (param_construct_interfere_size < max_align)
+	error ("%<--param constructive-interference-size=%d%> is less than "
+	       "%d", param_construct_interfere_size, max_align);
+      else if (param_construct_interfere_size > param_l1_cache_line_size)
+	warning (OPT_Winterference_size,
+		 "%<--param constructive-interference-size=%d%> "
+		 "is greater than %<--param l1-cache-line-size=%d%>",
+		 param_construct_interfere_size, param_l1_cache_line_size);
+    }
+  else if (param_l1_cache_line_size >= max_align)
+    param_construct_interfere_size = param_l1_cache_line_size;
 }
 
 /* Enter an abi node in global-module context.  returns a cookie to
diff --git a/gcc/testsuite/g++.dg/warn/Winterference-2.C b/gcc/testsuite/g++.dg/warn/Winterference-2.C
new file mode 100644
index 00000000000..2af75c63f83
--- /dev/null
+++ b/gcc/testsuite/g++.dg/warn/Winterference-2.C
@@ -0,0 +1,14 @@
+// { dg-do compile { target c++20 } }
+// { dg-additional-options -fmodules-ts }
+
+module ;
+
+#include <new>
+
+export module foo;
+
+export {
+  struct A {
+    alignas(std::hardware_destructive_interference_size) int x; // { dg-warning Winterference-size }
+  };
+}
diff --git a/gcc/testsuite/g++.dg/warn/Winterference.C b/gcc/testsuite/g++.dg/warn/Winterference.C
new file mode 100644
index 00000000000..57c001bc032
--- /dev/null
+++ b/gcc/testsuite/g++.dg/warn/Winterference.C
@@ -0,0 +1,6 @@
+// Test that we warn about use of std::hardware_destructive_interference_size
+// in a header.
+// { dg-do compile { target c++17 } }
+
+// { dg-warning Winterference-size "" { target *-*-* } 0 }
+#include "Winterference.H"
diff --git a/gcc/testsuite/g++.target/aarch64/interference.C b/gcc/testsuite/g++.target/aarch64/interference.C
new file mode 100644
index 00000000000..0fc01655223
--- /dev/null
+++ b/gcc/testsuite/g++.target/aarch64/interference.C
@@ -0,0 +1,9 @@
+// Test C++17 hardware interference size constants
+// { dg-do compile { target c++17 } }
+
+#include <new>
+
+// Most AArch64 CPUs have an L1 cache line size of 64, but some recent ones use
+// 128 or even 256.
+static_assert(std::hardware_destructive_interference_size == 256);
+static_assert(std::hardware_constructive_interference_size == 64);
diff --git a/gcc/testsuite/g++.target/arm/interference.C b/gcc/testsuite/g++.target/arm/interference.C
new file mode 100644
index 00000000000..34fe8a52bff
--- /dev/null
+++ b/gcc/testsuite/g++.target/arm/interference.C
@@ -0,0 +1,9 @@
+// Test C++17 hardware interference size constants
+// { dg-do compile { target c++17 } }
+
+#include <new>
+
+// Recent ARM CPUs have a cache line size of 64.  Older ones have
+// a size of 32, but I guess they're old enough that we don't care?
+static_assert(std::hardware_destructive_interference_size == 64);
+static_assert(std::hardware_constructive_interference_size == 64);
diff --git a/gcc/testsuite/g++.target/i386/interference.C b/gcc/testsuite/g++.target/i386/interference.C
new file mode 100644
index 00000000000..c7b910e3ada
--- /dev/null
+++ b/gcc/testsuite/g++.target/i386/interference.C
@@ -0,0 +1,8 @@
+// Test C++17 hardware interference size constants
+// { dg-do compile { target c++17 } }
+
+#include <new>
+
+// It is generally agreed that these are the right values for all x86.
+static_assert(std::hardware_destructive_interference_size == 64);
+static_assert(std::hardware_constructive_interference_size == 64);
diff --git a/gcc/testsuite/g++.dg/warn/Winterference.H b/gcc/testsuite/g++.dg/warn/Winterference.H
new file mode 100644
index 00000000000..36f0ad5f6d1
--- /dev/null
+++ b/gcc/testsuite/g++.dg/warn/Winterference.H
@@ -0,0 +1,7 @@
+#include <new>
+
+struct A
+{
+  alignas(std::hardware_destructive_interference_size) int i;
+  alignas(std::hardware_destructive_interference_size) int j;
+};
diff --git a/libstdc++-v3/include/std/version b/libstdc++-v3/include/std/version
index f950bf0f0db..f41004b5911 100644
--- a/libstdc++-v3/include/std/version
+++ b/libstdc++-v3/include/std/version
@@ -140,6 +140,9 @@
 #define __cpp_lib_filesystem 201703
 #define __cpp_lib_gcd 201606
 #define __cpp_lib_gcd_lcm 201606
+#ifdef __GCC_DESTRUCTIVE_SIZE
+# define __cpp_lib_hardware_interference_size 201703L
+#endif
 #define __cpp_lib_hypot 201603
 #define __cpp_lib_invoke 201411L
 #define __cpp_lib_lcm 201606
diff --git a/libstdc++-v3/libsupc++/new b/libstdc++-v3/libsupc++/new
index 3349b13fd1b..7bc67a6cb02 100644
--- a/libstdc++-v3/libsupc++/new
+++ b/libstdc++-v3/libsupc++/new
@@ -183,9 +183,9 @@ inline void operator delete[](void*, void*) _GLIBCXX_USE_NOEXCEPT { }
 } // extern "C++"
 
 #if __cplusplus >= 201703L
-#ifdef _GLIBCXX_HAVE_BUILTIN_LAUNDER
 namespace std
 {
+#ifdef _GLIBCXX_HAVE_BUILTIN_LAUNDER
 #define __cpp_lib_launder 201606
   /// Pointer optimization barrier [ptr.launder]
   template<typename _Tp>
@@ -205,8 +205,14 @@ namespace std
   void launder(const void*) = delete;
   void launder(volatile void*) = delete;
   void launder(const volatile void*) = delete;
-}
 #endif // _GLIBCXX_HAVE_BUILTIN_LAUNDER
+
+#ifdef __GCC_DESTRUCTIVE_SIZE
+# define __cpp_lib_hardware_interference_size 201703L
+  inline constexpr size_t hardware_destructive_interference_size = __GCC_DESTRUCTIVE_SIZE;
+  inline constexpr size_t hardware_constructive_interference_size = __GCC_CONSTRUCTIVE_SIZE;
+#endif // __GCC_DESTRUCTIVE_SIZE
+}
 #endif // C++17
 
 #if __cplusplus > 201703L