public inbox for newlib-cvs@sourceware.org
help / color / mirror / Atom feed
* [newlib-cygwin] libgloss: restore multilib settings in subdir makefiles
@ 2022-02-05 0:38 Michael Frysinger
0 siblings, 0 replies; only message in thread
From: Michael Frysinger @ 2022-02-05 0:38 UTC (permalink / raw)
To: newlib-cvs
https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;h=67c600b99545390c9ebaf96a84f47c3614e492ce
commit 67c600b99545390c9ebaf96a84f47c3614e492ce
Author: Mike Frysinger <vapier@gentoo.org>
Date: Fri Feb 4 01:17:54 2022 -0500
libgloss: restore multilib settings in subdir makefiles
Commit 754f8def0dfeeb43afa5a96ad1971fd0ef02c419 ("libgloss: merge stub
arch configure scripts up a level") had an unintended side-effect: the
MULTI* variables in the Makefiles no longer get rewritten at configure
time in the subdirs. Only the top-level Makefile still is. This is
because the configure integration of multilib (both the way libgloss
did it manually and the way AM_ENABLE_MULTILIB does it) only rewrites
"Makefile".
We could try propagating the MULTI* variables from libgloss/Makefile
down via FLAGS_TO_PASS, but this runs into a limitation: the multilib
logic uses this variable to switch from libgloss/ to each multilib
libgloss/, and libgloss uses this variable to enter subdirectories.
The latter we want, but the former ends up overridding the Makefile
environment. We could side-step that with some GNU Make directives,
but it feels like we're getting a bit too deep down the rabbit hole.
Instead, let's call config-ml.in ourselves for each subdir Makefile
that the top-level configure generates. This restores the previous
behavior and should be less risky in general.
This logic should be unnecessary when/if we switch libgloss over to
a non-recursive Automake build (since all build+install settings are
in the single libgloss/Makefile), but it'll be a while before we can
land that rework, so let's fix this up now.
Diff:
---
libgloss/arm/configure | 2 ++
libgloss/arm/configure.ac | 4 +++-
libgloss/configure | 15 ++++++++++++++-
libgloss/configure.ac | 13 +++++++++++++
4 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/libgloss/arm/configure b/libgloss/arm/configure
index 8e3866b56..84878afff 100755
--- a/libgloss/arm/configure
+++ b/libgloss/arm/configure
@@ -3926,6 +3926,8 @@ $as_echo X"$file" |
done
}
;;
+ "cpu-init/Makefile":F) ac_file=cpu-init/Makefile . ${srcdir}/../../config-ml.in
+ ;;
"default-1":C)
# Only add multilib support code if we just rebuilt the top-level
# Makefile.
diff --git a/libgloss/arm/configure.ac b/libgloss/arm/configure.ac
index 2b98b5453..3d7ba7da1 100644
--- a/libgloss/arm/configure.ac
+++ b/libgloss/arm/configure.ac
@@ -62,7 +62,9 @@ AC_SUBST_FILE(host_makefile_frag)
# Configure cpu init plug-ins
if test -d "${srcdir}/cpu-init"; then
subdirs="${subdirs} cpu-init"
- AC_CONFIG_FILES([cpu-init/Makefile])
+ AC_CONFIG_FILES([cpu-init/Makefile], [dnl
+ ac_file=cpu-init/Makefile . ${srcdir}/../../config-ml.in
+ ])
AC_SUBST(subdirs)
fi
diff --git a/libgloss/configure b/libgloss/configure
index 3fc20d6a2..64f08cf16 100755
--- a/libgloss/configure
+++ b/libgloss/configure
@@ -4794,6 +4794,9 @@ target_makefile_frag_path=$target_makefile_frag
+ac_config_commands="$ac_config_commands default-1"
+
+
# Default to --enable-multilib
# Check whether --enable-multilib was given.
if test "${enable_multilib+set}" = set; then :
@@ -4829,7 +4832,7 @@ if test $cross_compiling = no && test $multilib = yes \
cross_compiling=maybe
fi
-ac_config_commands="$ac_config_commands default-1"
+ac_config_commands="$ac_config_commands default-2"
ac_config_files="$ac_config_files Makefile"
@@ -5554,6 +5557,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
# INIT-COMMANDS
#
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+subdirs="$subdirs"
srcdir="$srcdir"
host="$host"
@@ -5618,6 +5622,7 @@ do
"libnosys/Makefile") CONFIG_FILES="$CONFIG_FILES libnosys/Makefile" ;;
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
+ "default-2") CONFIG_COMMANDS="$CONFIG_COMMANDS default-2" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
@@ -6347,6 +6352,14 @@ $as_echo X"$file" |
}
;;
"default-1":C)
+for subdir in $subdirs; do
+ case " $CONFIG_FILES " in
+ *" $subdir/Makefile "*)
+ ac_file=$subdir/Makefile . ${multi_basedir}/config-ml.in
+ ;;
+ esac
+done ;;
+ "default-2":C)
# Only add multilib support code if we just rebuilt the top-level
# Makefile.
case " $CONFIG_FILES " in
diff --git a/libgloss/configure.ac b/libgloss/configure.ac
index ac812c69b..1fa877729 100644
--- a/libgloss/configure.ac
+++ b/libgloss/configure.ac
@@ -330,6 +330,19 @@ target_makefile_frag_path=$target_makefile_frag
AC_SUBST(target_makefile_frag_path)
AC_SUBST_FILE(target_makefile_frag)
+dnl AM_ENABLE_MULTILIB only processes the top-level Makefile, but we want the
+dnl multilib settings to propagate to all sub-Makefiles that we recurse into
+dnl too. This can go away if we ever get rid of sub-Makefiles and only use
+dnl Automake + makefile include fragments.
+AC_OUTPUT_COMMANDS([
+for subdir in $subdirs; do
+ case " $CONFIG_FILES " in
+ *" $subdir/Makefile "*)
+ ac_file=$subdir/Makefile . ${multi_basedir}/config-ml.in
+ ;;
+ esac
+done], [subdirs="$subdirs"])
+
AM_ENABLE_MULTILIB(, ..)
AC_CONFIG_FILES([Makefile])
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-02-05 0:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-05 0:38 [newlib-cygwin] libgloss: restore multilib settings in subdir makefiles Michael Frysinger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).