* [PATCH 00/12] sync etc/ to bfd/gdb tree
@ 2021-11-10 0:14 Mike Frysinger
2021-11-10 0:14 ` [PATCH 01/12] Fix compile time warning messages building with gcc v6.1.1 Mike Frysinger
` (12 more replies)
0 siblings, 13 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
This pulls in all the commits that updated etc/ since it was last updated.
Alan Modra (5):
update-copyright.py for binutils
Update year range in copyright notice of binutils files
Update year range in copyright notice of binutils files
Add libctf to update-copyright.py
Update year range in copyright notice of binutils files
Mike Frysinger (2):
etc: rename configure.in to configure.ac
etc: switch to automake
Nick Clifton (2):
Fix compile time warning messages building with gcc v6.1.1
Update the address of the FSF in the copyright notice of files which
were using the old address.
Sergei Trofimovich (1):
texi2pod.pl: add no-op --no-split option support [PR28144]
Simon Marchi (2):
Bump to autoconf 2.69 and automake 1.15.1
texi2pod.pl: import support for @t{...} from gcc
COPYING.LIBGLOSS | 8 +-
ChangeLog | 4 +
etc/ChangeLog | 34 ++
etc/Makefile.am | 19 +
etc/Makefile.in | 407 +++++++++++++--
etc/aclocal.m4 | 792 ++++++++++++++++++++++++++++
etc/add-log.el | 8 +-
etc/configure | 1086 +++++++++++++++++++++++++++++++--------
etc/configure.ac | 9 +
etc/configure.in | 27 -
etc/texi2pod.pl | 7 +-
etc/update-copyright.py | 622 ++++++++++++++++++++++
12 files changed, 2713 insertions(+), 310 deletions(-)
create mode 100644 etc/Makefile.am
create mode 100644 etc/aclocal.m4
create mode 100644 etc/configure.ac
delete mode 100644 etc/configure.in
create mode 100755 etc/update-copyright.py
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 01/12] Fix compile time warning messages building with gcc v6.1.1
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 02/12] update-copyright.py for binutils Mike Frysinger
` (11 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Nick Clifton <nickc@redhat.com>
etc * texi2pod.pl: Escape curly braces, whilst searching for keyword
strong.
gas * config/tc-arm.c: For non-ELF based targets skip ARM feature sets
that are not supported.
* config/tc-arc.c (md_apply_fix): Avoid left shifting a signed
constant.
* config/tc-cr16.c (check_range): Likewise.
* config/tc-nios2.c (nios2_check_overflow): Likewise.
---
etc/ChangeLog | 5 +++++
etc/texi2pod.pl | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/etc/ChangeLog b/etc/ChangeLog
index c1103382652a..1864bf0c89f4 100644
--- a/etc/ChangeLog
+++ b/etc/ChangeLog
@@ -1,3 +1,8 @@
+2016-06-13 Nick Clifton <nickc@redhat.com>
+
+ * texi2pod.pl: Escape curly braces, whilst searching for keyword
+ strong.
+
2016-03-18 Nick Clifton <nickc@redhat.com>
* texi2pod.pl: Add TARGET to the list of recognised man page
diff --git a/etc/texi2pod.pl b/etc/texi2pod.pl
index dd3e181db34c..0f465b7c768c 100644
--- a/etc/texi2pod.pl
+++ b/etc/texi2pod.pl
@@ -311,7 +311,7 @@ while(<$inf>) {
@columns = ();
for $column (split (/\s*\@tab\s*/, $1)) {
# @strong{...} is used a @headitem work-alike
- $column =~ s/^\@strong{(.*)}$/$1/;
+ $column =~ s/^\@strong\{(.*)\}$/$1/;
push @columns, $column;
}
$_ = "\n=item ".join (" : ", @columns)."\n";
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 02/12] update-copyright.py for binutils
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
2021-11-10 0:14 ` [PATCH 01/12] Fix compile time warning messages building with gcc v6.1.1 Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 03/12] Update the address of the FSF in the copyright notice of files which were using the old address Mike Frysinger
` (10 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Alan Modra <amodra@gmail.com>
This is a modified form of gcc's contrib/update-copyright.py.
* update-copyright.py: New file.
* add-log.el: Update copyright year range.
* texi2pod.pl: Likewise.
---
etc/ChangeLog | 6 +
etc/add-log.el | 2 +-
etc/texi2pod.pl | 2 +-
etc/update-copyright.py | 620 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 628 insertions(+), 2 deletions(-)
create mode 100755 etc/update-copyright.py
diff --git a/etc/ChangeLog b/etc/ChangeLog
index 1864bf0c89f4..165fdd58b223 100644
--- a/etc/ChangeLog
+++ b/etc/ChangeLog
@@ -1,3 +1,9 @@
+2017-01-04 Alan Modra <amodra@gmail.com>
+
+ * update-copyright.py: New file.
+ * add-log.el: Update copyright year range.
+ * texi2pod.pl: Likewise.
+
2016-06-13 Nick Clifton <nickc@redhat.com>
* texi2pod.pl: Escape curly braces, whilst searching for keyword
diff --git a/etc/add-log.el b/etc/add-log.el
index 60c88e8c9490..03eee2546a13 100644
--- a/etc/add-log.el
+++ b/etc/add-log.el
@@ -25,7 +25,7 @@
;;; add-log.el --- change log maintenance commands for Emacs
-;; Copyright (C) 1985, 1986, 1988, 1993, 1994 Free Software Foundation, Inc.
+;; Copyright (C) 1985-2017 Free Software Foundation, Inc.
;; Keywords: maint
diff --git a/etc/texi2pod.pl b/etc/texi2pod.pl
index 0f465b7c768c..e8192e4d36d8 100644
--- a/etc/texi2pod.pl
+++ b/etc/texi2pod.pl
@@ -1,6 +1,6 @@
#! /usr/bin/perl -w
-# Copyright (C) 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
# This file is part of GCC.
diff --git a/etc/update-copyright.py b/etc/update-copyright.py
new file mode 100755
index 000000000000..55d443bcd60c
--- /dev/null
+++ b/etc/update-copyright.py
@@ -0,0 +1,620 @@
+#!/usr/bin/python
+#
+# Copyright (C) 2013-2017 Free Software Foundation, Inc.
+#
+# This script is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+
+# This script adjusts the copyright notices at the top of source files
+# so that they have the form:
+#
+# Copyright XXXX-YYYY Free Software Foundation, Inc.
+#
+# It doesn't change code that is known to be maintained elsewhere or
+# that carries a non-FSF copyright.
+#
+# Pass --this-year to the script if you want it to add the current year
+# to all applicable notices. Pass --quilt if you are using quilt and
+# want files to be added to the quilt before being changed.
+#
+# By default the script will update all directories for which the
+# output has been vetted. You can instead pass the names of individual
+# directories, including those that haven't been approved. So:
+#
+# update-copyright.pl --this-year
+#
+# is the command that would be used at the beginning of a year to update
+# all copyright notices (and possibly at other times to check whether
+# new files have been added with old years). On the other hand:
+#
+# update-copyright.pl --this-year libjava
+#
+# would run the script on just libjava/.
+#
+# This script was copied from gcc's contrib/ and modified to suit
+# binutils. In contrast to the gcc script, this one will update
+# the testsuite and --version output strings too.
+
+import os
+import re
+import sys
+import time
+import subprocess
+
+class Errors:
+ def __init__ (self):
+ self.num_errors = 0
+
+ def report (self, filename, string):
+ if filename:
+ string = filename + ': ' + string
+ sys.stderr.write (string + '\n')
+ self.num_errors += 1
+
+ def ok (self):
+ return self.num_errors == 0
+
+class GenericFilter:
+ def __init__ (self):
+ self.skip_files = set()
+ self.skip_dirs = set()
+ self.skip_extensions = set()
+ self.fossilised_files = set()
+ self.own_files = set()
+
+ self.skip_files |= set ([
+ # Skip licence files.
+ 'COPYING',
+ 'COPYING.LIB',
+ 'COPYING3',
+ 'COPYING3.LIB',
+ 'COPYING.LIBGLOSS',
+ 'COPYING.NEWLIB',
+ 'LICENSE',
+ 'fdl.texi',
+ 'gpl_v3.texi',
+ 'fdl-1.3.xml',
+ 'gpl-3.0.xml',
+
+ # Skip auto- and libtool-related files
+ 'aclocal.m4',
+ 'compile',
+ 'config.guess',
+ 'config.sub',
+ 'depcomp',
+ 'install-sh',
+ 'libtool.m4',
+ 'ltmain.sh',
+ 'ltoptions.m4',
+ 'ltsugar.m4',
+ 'ltversion.m4',
+ 'lt~obsolete.m4',
+ 'missing',
+ 'mkdep',
+ 'mkinstalldirs',
+ 'move-if-change',
+ 'shlibpath.m4',
+ 'symlink-tree',
+ 'ylwrap',
+
+ # Skip FSF mission statement, etc.
+ 'gnu.texi',
+ 'funding.texi',
+ 'appendix_free.xml',
+
+ # Skip imported texinfo files.
+ 'texinfo.tex',
+ ])
+
+ self.skip_extensions |= set ([
+ # Maintained by the translation project.
+ '.po',
+
+ # Automatically-generated.
+ '.pot',
+ ])
+
+ self.skip_dirs |= set ([
+ 'autom4te.cache',
+ ])
+
+
+ def get_line_filter (self, dir, filename):
+ if filename.startswith ('ChangeLog'):
+ # Ignore references to copyright in changelog entries.
+ return re.compile ('\t')
+
+ return None
+
+ def skip_file (self, dir, filename):
+ if filename in self.skip_files:
+ return True
+
+ (base, extension) = os.path.splitext (os.path.join (dir, filename))
+ if extension in self.skip_extensions:
+ return True
+
+ if extension == '.in':
+ # Skip .in files produced by automake.
+ if os.path.exists (base + '.am'):
+ return True
+
+ # Skip files produced by autogen
+ if (os.path.exists (base + '.def')
+ and os.path.exists (base + '.tpl')):
+ return True
+
+ # Skip configure files produced by autoconf
+ if filename == 'configure':
+ if os.path.exists (base + '.ac'):
+ return True
+ if os.path.exists (base + '.in'):
+ return True
+
+ return False
+
+ def skip_dir (self, dir, subdir):
+ return subdir in self.skip_dirs
+
+ def is_fossilised_file (self, dir, filename):
+ if filename in self.fossilised_files:
+ return True
+ # Only touch current current ChangeLogs.
+ if filename != 'ChangeLog' and filename.find ('ChangeLog') >= 0:
+ return True
+ return False
+
+ def by_package_author (self, dir, filename):
+ return filename in self.own_files
+
+class Copyright:
+ def __init__ (self, errors):
+ self.errors = errors
+
+ # Characters in a range of years. Include '.' for typos.
+ ranges = '[0-9](?:[-0-9.,\s]|\s+and\s+)*[0-9]'
+
+ # Non-whitespace characters in a copyright holder's name.
+ name = '[\w.,-]'
+
+ # Matches one year.
+ self.year_re = re.compile ('[0-9]+')
+
+ # Matches part of a year or copyright holder.
+ self.continuation_re = re.compile (ranges + '|' + name)
+
+ # Matches a full copyright notice:
+ self.copyright_re = re.compile (
+ # 1: 'Copyright (C)', etc.
+ '([Cc]opyright'
+ '|[Cc]opyright\s+\([Cc]\)'
+ '|[Cc]opyright\s+%s'
+ '|[Cc]opyright\s+©'
+ '|[Cc]opyright\s+@copyright{}'
+ '|@set\s+copyright[\w-]+)'
+
+ # 2: the years. Include the whitespace in the year, so that
+ # we can remove any excess.
+ '(\s*(?:' + ranges + ',?'
+ '|@value\{[^{}]*\})\s*)'
+
+ # 3: 'by ', if used
+ '(by\s+)?'
+
+ # 4: the copyright holder. Don't allow multiple consecutive
+ # spaces, so that right-margin gloss doesn't get caught
+ # (e.g. gnat_ugn.texi).
+ '(' + name + '(?:\s?' + name + ')*)?')
+
+ # A regexp for notices that might have slipped by. Just matching
+ # 'copyright' is too noisy, and 'copyright.*[0-9]' falls foul of
+ # HTML header markers, so check for 'copyright' and two digits.
+ self.other_copyright_re = re.compile ('(^|[^\._])copyright[^=]*[0-9][0-9]',
+ re.IGNORECASE)
+ self.comment_re = re.compile('#+|[*]+|;+|%+|//+|@c |dnl ')
+ self.holders = { '@copying': '@copying' }
+ self.holder_prefixes = set()
+
+ # True to 'quilt add' files before changing them.
+ self.use_quilt = False
+
+ # If set, force all notices to include this year.
+ self.max_year = None
+
+ # Goes after the year(s). Could be ', '.
+ self.separator = ' '
+
+ def add_package_author (self, holder, canon_form = None):
+ if not canon_form:
+ canon_form = holder
+ self.holders[holder] = canon_form
+ index = holder.find (' ')
+ while index >= 0:
+ self.holder_prefixes.add (holder[:index])
+ index = holder.find (' ', index + 1)
+
+ def add_external_author (self, holder):
+ self.holders[holder] = None
+
+ class BadYear():
+ def __init__ (self, year):
+ self.year = year
+
+ def __str__ (self):
+ return 'unrecognised year: ' + self.year
+
+ def parse_year (self, string):
+ year = int (string)
+ if len (string) == 2:
+ if year > 70:
+ return year + 1900
+ elif len (string) == 4:
+ return year
+ raise self.BadYear (string)
+
+ def year_range (self, years):
+ year_list = [self.parse_year (year)
+ for year in self.year_re.findall (years)]
+ assert len (year_list) > 0
+ return (min (year_list), max (year_list))
+
+ def set_use_quilt (self, use_quilt):
+ self.use_quilt = use_quilt
+
+ def include_year (self, year):
+ assert not self.max_year
+ self.max_year = year
+
+ def canonicalise_years (self, dir, filename, filter, years):
+ # Leave texinfo variables alone.
+ if years.startswith ('@value'):
+ return years
+
+ (min_year, max_year) = self.year_range (years)
+
+ # Update the upper bound, if enabled.
+ if self.max_year and not filter.is_fossilised_file (dir, filename):
+ max_year = max (max_year, self.max_year)
+
+ # Use a range.
+ if min_year == max_year:
+ return '%d' % min_year
+ else:
+ return '%d-%d' % (min_year, max_year)
+
+ def strip_continuation (self, line):
+ line = line.lstrip()
+ match = self.comment_re.match (line)
+ if match:
+ line = line[match.end():].lstrip()
+ return line
+
+ def is_complete (self, match):
+ holder = match.group (4)
+ return (holder
+ and (holder not in self.holder_prefixes
+ or holder in self.holders))
+
+ def update_copyright (self, dir, filename, filter, file, line, match):
+ orig_line = line
+ next_line = None
+ pathname = os.path.join (dir, filename)
+
+ intro = match.group (1)
+ if intro.startswith ('@set'):
+ # Texinfo year variables should always be on one line
+ after_years = line[match.end (2):].strip()
+ if after_years != '':
+ self.errors.report (pathname,
+ 'trailing characters in @set: '
+ + after_years)
+ return (False, orig_line, next_line)
+ else:
+ # If it looks like the copyright is incomplete, add the next line.
+ while not self.is_complete (match):
+ try:
+ next_line = file.next()
+ except StopIteration:
+ break
+
+ # If the next line doesn't look like a proper continuation,
+ # assume that what we've got is complete.
+ continuation = self.strip_continuation (next_line)
+ if not self.continuation_re.match (continuation):
+ break
+
+ # Merge the lines for matching purposes.
+ orig_line += next_line
+ line = line.rstrip() + ' ' + continuation
+ next_line = None
+
+ # Rematch with the longer line, at the original position.
+ match = self.copyright_re.match (line, match.start())
+ assert match
+
+ holder = match.group (4)
+
+ # Use the filter to test cases where markup is getting in the way.
+ if filter.by_package_author (dir, filename):
+ assert holder not in self.holders
+
+ elif not holder:
+ self.errors.report (pathname, 'missing copyright holder')
+ return (False, orig_line, next_line)
+
+ elif holder not in self.holders:
+ self.errors.report (pathname,
+ 'unrecognised copyright holder: ' + holder)
+ return (False, orig_line, next_line)
+
+ else:
+ # See whether the copyright is associated with the package
+ # author.
+ canon_form = self.holders[holder]
+ if not canon_form:
+ return (False, orig_line, next_line)
+
+ # Make sure the author is given in a consistent way.
+ line = (line[:match.start (4)]
+ + canon_form
+ + line[match.end (4):])
+
+ # Remove any 'by'
+ line = line[:match.start (3)] + line[match.end (3):]
+
+ # Update the copyright years.
+ years = match.group (2).strip()
+ if (self.max_year
+ and match.start(0) > 0 and line[match.start(0)-1] == '"'
+ and not filter.is_fossilised_file (dir, filename)):
+ # A printed copyright date consists of the current year
+ canon_form = '%d' % self.max_year
+ else:
+ try:
+ canon_form = self.canonicalise_years (dir, filename, filter, years)
+ except self.BadYear as e:
+ self.errors.report (pathname, str (e))
+ return (False, orig_line, next_line)
+
+ line = (line[:match.start (2)]
+ + ' ' + canon_form + self.separator
+ + line[match.end (2):])
+
+ # Use the standard (C) form.
+ if intro.endswith ('right'):
+ intro += ' (C)'
+ elif intro.endswith ('(c)'):
+ intro = intro[:-3] + '(C)'
+ line = line[:match.start (1)] + intro + line[match.end (1):]
+
+ # Strip trailing whitespace
+ line = line.rstrip() + '\n'
+
+ return (line != orig_line, line, next_line)
+
+ def process_file (self, dir, filename, filter):
+ pathname = os.path.join (dir, filename)
+ if filename.endswith ('.tmp'):
+ # Looks like something we tried to create before.
+ try:
+ os.remove (pathname)
+ except OSError:
+ pass
+ return
+
+ lines = []
+ changed = False
+ line_filter = filter.get_line_filter (dir, filename)
+ with open (pathname, 'r') as file:
+ prev = None
+ for line in file:
+ while line:
+ next_line = None
+ # Leave filtered-out lines alone.
+ if not (line_filter and line_filter.match (line)):
+ match = self.copyright_re.search (line)
+ if match:
+ res = self.update_copyright (dir, filename, filter,
+ file, line, match)
+ (this_changed, line, next_line) = res
+ changed = changed or this_changed
+
+ # Check for copyright lines that might have slipped by.
+ elif self.other_copyright_re.search (line):
+ self.errors.report (pathname,
+ 'unrecognised copyright: %s'
+ % line.strip())
+ lines.append (line)
+ line = next_line
+
+ # If something changed, write the new file out.
+ if changed and self.errors.ok():
+ tmp_pathname = pathname + '.tmp'
+ with open (tmp_pathname, 'w') as file:
+ for line in lines:
+ file.write (line)
+ if self.use_quilt:
+ subprocess.call (['quilt', 'add', pathname])
+ os.rename (tmp_pathname, pathname)
+
+ def process_tree (self, tree, filter):
+ for (dir, subdirs, filenames) in os.walk (tree):
+ # Don't recurse through directories that should be skipped.
+ for i in xrange (len (subdirs) - 1, -1, -1):
+ if filter.skip_dir (dir, subdirs[i]):
+ del subdirs[i]
+
+ # Handle the files in this directory.
+ for filename in filenames:
+ if filter.skip_file (dir, filename):
+ sys.stdout.write ('Skipping %s\n'
+ % os.path.join (dir, filename))
+ else:
+ self.process_file (dir, filename, filter)
+
+class CmdLine:
+ def __init__ (self, copyright = Copyright):
+ self.errors = Errors()
+ self.copyright = copyright (self.errors)
+ self.dirs = []
+ self.default_dirs = []
+ self.chosen_dirs = []
+ self.option_handlers = dict()
+ self.option_help = []
+
+ self.add_option ('--help', 'Print this help', self.o_help)
+ self.add_option ('--quilt', '"quilt add" files before changing them',
+ self.o_quilt)
+ self.add_option ('--this-year', 'Add the current year to every notice',
+ self.o_this_year)
+
+ def add_option (self, name, help, handler):
+ self.option_help.append ((name, help))
+ self.option_handlers[name] = handler
+
+ def add_dir (self, dir, filter = GenericFilter()):
+ self.dirs.append ((dir, filter))
+
+ def o_help (self, option = None):
+ sys.stdout.write ('Usage: %s [options] dir1 dir2...\n\n'
+ 'Options:\n' % sys.argv[0])
+ format = '%-15s %s\n'
+ for (what, help) in self.option_help:
+ sys.stdout.write (format % (what, help))
+ sys.stdout.write ('\nDirectories:\n')
+
+ format = '%-25s'
+ i = 0
+ for (dir, filter) in self.dirs:
+ i += 1
+ if i % 3 == 0 or i == len (self.dirs):
+ sys.stdout.write (dir + '\n')
+ else:
+ sys.stdout.write (format % dir)
+ sys.exit (0)
+
+ def o_quilt (self, option):
+ self.copyright.set_use_quilt (True)
+
+ def o_this_year (self, option):
+ self.copyright.include_year (time.localtime().tm_year)
+
+ def main (self):
+ for arg in sys.argv[1:]:
+ if arg[:1] != '-':
+ self.chosen_dirs.append (arg)
+ elif arg in self.option_handlers:
+ self.option_handlers[arg] (arg)
+ else:
+ self.errors.report (None, 'unrecognised option: ' + arg)
+ if self.errors.ok():
+ if len (self.chosen_dirs) == 0:
+ self.chosen_dirs = self.default_dirs
+ if len (self.chosen_dirs) == 0:
+ self.o_help()
+ else:
+ for chosen_dir in self.chosen_dirs:
+ canon_dir = os.path.join (chosen_dir, '')
+ count = 0
+ for (dir, filter) in self.dirs:
+ if (dir + os.sep).startswith (canon_dir):
+ count += 1
+ self.copyright.process_tree (dir, filter)
+ if count == 0:
+ self.errors.report (None, 'unrecognised directory: '
+ + chosen_dir)
+ sys.exit (0 if self.errors.ok() else 1)
+
+#----------------------------------------------------------------------------
+
+class TopLevelFilter (GenericFilter):
+ def skip_dir (self, dir, subdir):
+ return True
+
+class ConfigFilter (GenericFilter):
+ def __init__ (self):
+ GenericFilter.__init__ (self)
+
+ def skip_file (self, dir, filename):
+ if filename.endswith ('.m4'):
+ pathname = os.path.join (dir, filename)
+ with open (pathname) as file:
+ # Skip files imported from gettext.
+ if file.readline().find ('gettext-') >= 0:
+ return True
+ return GenericFilter.skip_file (self, dir, filename)
+
+class LdFilter (GenericFilter):
+ def __init__ (self):
+ GenericFilter.__init__ (self)
+
+ self.skip_extensions |= set ([
+ # ld testsuite output match files.
+ '.ro',
+ ])
+
+class BinutilsCopyright (Copyright):
+ def __init__ (self, errors):
+ Copyright.__init__ (self, errors)
+
+ canon_fsf = 'Free Software Foundation, Inc.'
+ self.add_package_author ('Free Software Foundation', canon_fsf)
+ self.add_package_author ('Free Software Foundation.', canon_fsf)
+ self.add_package_author ('Free Software Foundation Inc.', canon_fsf)
+ self.add_package_author ('Free Software Foundation, Inc', canon_fsf)
+ self.add_package_author ('Free Software Foundation, Inc.', canon_fsf)
+ self.add_package_author ('The Free Software Foundation', canon_fsf)
+ self.add_package_author ('The Free Software Foundation, Inc.', canon_fsf)
+ self.add_package_author ('Software Foundation, Inc.', canon_fsf)
+
+ self.add_external_author ('Carnegie Mellon University')
+ self.add_external_author ('John D. Polstra.')
+ self.add_external_author ('Linaro Ltd.')
+ self.add_external_author ('MIPS Computer Systems, Inc.')
+ self.add_external_author ('Red Hat Inc.')
+ self.add_external_author ('Regents of the University of California.')
+ self.add_external_author ('The Regents of the University of California.')
+ self.add_external_author ('Third Eye Software, Inc.')
+ self.add_external_author ('Ulrich Drepper')
+ self.add_external_author ('Synopsys Inc.')
+
+class BinutilsCmdLine (CmdLine):
+ def __init__ (self):
+ CmdLine.__init__ (self, BinutilsCopyright)
+
+ self.add_dir ('.', TopLevelFilter())
+ self.add_dir ('bfd')
+ self.add_dir ('binutils')
+ self.add_dir ('config', ConfigFilter())
+ self.add_dir ('cpu')
+ self.add_dir ('elfcpp')
+ self.add_dir ('etc')
+ self.add_dir ('gas')
+ self.add_dir ('gdb')
+ self.add_dir ('gold')
+ self.add_dir ('gprof')
+ self.add_dir ('include')
+ self.add_dir ('ld', LdFilter())
+ self.add_dir ('libdecnumber')
+ self.add_dir ('libiberty')
+ self.add_dir ('opcodes')
+ self.add_dir ('readline')
+ self.add_dir ('sim')
+
+ self.default_dirs = [
+ 'bfd',
+ 'binutils',
+ 'elfcpp',
+ 'etc',
+ 'gas',
+ 'gold',
+ 'gprof',
+ 'include',
+ 'ld',
+ 'libiberty',
+ 'opcodes',
+ ]
+
+BinutilsCmdLine().main()
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 03/12] Update the address of the FSF in the copyright notice of files which were using the old address.
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
2021-11-10 0:14 ` [PATCH 01/12] Fix compile time warning messages building with gcc v6.1.1 Mike Frysinger
2021-11-10 0:14 ` [PATCH 02/12] update-copyright.py for binutils Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 04/12] Update year range in copyright notice of binutils files Mike Frysinger
` (9 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Nick Clifton <nickc@redhat.com>
top * COPYING.LIBGLOSS: Update address of FSF in copyright notice.
bfd * cpu-mt.c: Update address of FSF in copyright notice.
* elf32-m32c.c: Likewise.
* elf32-mt.c: Likewise.
* elf32-rl78.c: Likewise.
* elf32-rx.c: Likewise.
* elf32-rx.h: Likewise.
* elf32-spu.h: Likewise.
* hosts/x86-64linux.h: Likewise.
etc * add-log.el: Update address of FSF in copyright notice.
gas * config/tc-m32c.c: Update address of FSF in copyright notice.
* config/tc-m32c.h: Likewise.
* config/tc-mt.c: Likewise.
* config/tc-mt.h: Likewise.
* config/tc-visium.c: Likewise.
* config/tc-visium.h: Likewise.
* testsuite/gas/rx/explode: Likewise.
ld * testsuite/ld-mn10300/mn10300.exp: Update address of FSF in
copyright notice.
---
COPYING.LIBGLOSS | 8 ++++----
ChangeLog | 4 ++++
etc/ChangeLog | 4 ++++
etc/add-log.el | 6 +++---
4 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/COPYING.LIBGLOSS b/COPYING.LIBGLOSS
index 7ae0cd9a4705..badd5b9f99d7 100644
--- a/COPYING.LIBGLOSS
+++ b/COPYING.LIBGLOSS
@@ -313,10 +313,10 @@ WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+ MA 02110-1301, USA.
As a special exception, if you link this library with files
compiled with GCC to produce an executable, this does not cause
diff --git a/ChangeLog b/ChangeLog
index dd13915f8999..33e9766b8d17 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,7 @@
+2017-12-14 Nick Clifton <nickc@redhat.com>
+
+ * COPYING.LIBGLOSS: Update address of FSF in copyright notice.
+
2016-06-23 Jeff Johnston <jjohnstn@redhat.com>
* Sync toplevel with upstream GCC.
diff --git a/etc/ChangeLog b/etc/ChangeLog
index 165fdd58b223..dc8673084f2d 100644
--- a/etc/ChangeLog
+++ b/etc/ChangeLog
@@ -1,3 +1,7 @@
+2017-12-14 Nick Clifton <nickc@redhat.com>
+
+ * add-log.el: Update address of FSF in copyright notice.
+
2017-01-04 Alan Modra <amodra@gmail.com>
* update-copyright.py: New file.
diff --git a/etc/add-log.el b/etc/add-log.el
index 03eee2546a13..dd8a68a1092e 100644
--- a/etc/add-log.el
+++ b/etc/add-log.el
@@ -42,9 +42,9 @@
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
-;; along with GNU Emacs; see the file COPYING. If not, write to the
-;; Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-;; Boston, MA 02111-1307, USA.
+;; along with this program; if not, write to the Free Software
+;; Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+;; MA 02110-1301, USA.
;;; Commentary:
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 04/12] Update year range in copyright notice of binutils files
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (2 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 03/12] Update the address of the FSF in the copyright notice of files which were using the old address Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 05/12] Bump to autoconf 2.69 and automake 1.15.1 Mike Frysinger
` (8 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Alan Modra <amodra@gmail.com>
---
etc/ChangeLog | 6 ++++++
etc/add-log.el | 2 +-
etc/texi2pod.pl | 2 +-
etc/update-copyright.py | 2 +-
4 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/etc/ChangeLog b/etc/ChangeLog
index dc8673084f2d..3139d8ec7f05 100644
--- a/etc/ChangeLog
+++ b/etc/ChangeLog
@@ -1,3 +1,9 @@
+2018-01-03 Alan Modra <amodra@gmail.com>
+
+ * add-log.el: Update copyright year range.
+ * texi2pod.pl: Likewise.
+ * update-copyright.py: Likewise.
+
2017-12-14 Nick Clifton <nickc@redhat.com>
* add-log.el: Update address of FSF in copyright notice.
diff --git a/etc/add-log.el b/etc/add-log.el
index dd8a68a1092e..84573eed1589 100644
--- a/etc/add-log.el
+++ b/etc/add-log.el
@@ -25,7 +25,7 @@
;;; add-log.el --- change log maintenance commands for Emacs
-;; Copyright (C) 1985-2017 Free Software Foundation, Inc.
+;; Copyright (C) 1985-2018 Free Software Foundation, Inc.
;; Keywords: maint
diff --git a/etc/texi2pod.pl b/etc/texi2pod.pl
index e8192e4d36d8..f4721f45e1c7 100644
--- a/etc/texi2pod.pl
+++ b/etc/texi2pod.pl
@@ -1,6 +1,6 @@
#! /usr/bin/perl -w
-# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
# This file is part of GCC.
diff --git a/etc/update-copyright.py b/etc/update-copyright.py
index 55d443bcd60c..f9f505827b34 100755
--- a/etc/update-copyright.py
+++ b/etc/update-copyright.py
@@ -1,6 +1,6 @@
#!/usr/bin/python
#
-# Copyright (C) 2013-2017 Free Software Foundation, Inc.
+# Copyright (C) 2013-2018 Free Software Foundation, Inc.
#
# This script is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 05/12] Bump to autoconf 2.69 and automake 1.15.1
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (3 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 04/12] Update year range in copyright notice of binutils files Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 06/12] Update year range in copyright notice of binutils files Mike Frysinger
` (7 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Simon Marchi <simon.marchi@ericsson.com>
When trying to run the update-gnulib.sh script in gdb, I get this:
Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1.
Aborting.
Apparently, it's an issue with a regex in automake that triggers a
warning starting with Perl 5.22. It has been fixed in automake 1.15.1.
So I think it's a good excuse to bump the versions of autoconf and
automake used in the gnulib import. And to avoid requiring multiple
builds of autoconf/automake, it was suggested that we bump the required
version of those tools for all binutils-gdb.
For autoconf, the 2.69 version is universally available, so it's an easy
choice. For automake, different distros and distro versions have
different automake versions. But 1.15.1 seems to be the most readily
available as a package. In any case, it's easy to build it from source.
I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ,
because I don't think they are useful in our case. They only specify a
lower bound for the acceptable version of automake/autoconf. That's
useful if you let the user choose the version of the tool they want to
use, but want to set a minimum version (because you use a feature that
was introduced in that version). In our case, we force people to use a
specific version anyway. For the autoconf version, we have the check in
config/override.m4 that enforces the version we want. It will be one
less thing to update next time we change autotools version.
I hit a few categories of problems that required some changes. They are
described below along with the chosen solutions.
Problem 1:
configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see:
configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation
Solution 1:
Adjust the code based on the example at that URL.
Problem 2 (in zlib/):
Makefile.am: error: required file './INSTALL' not found
Makefile.am: 'automake --add-missing' can install 'INSTALL'
Makefile.am: error: required file './NEWS' not found
Makefile.am: error: required file './AUTHORS' not found
Makefile.am: error: required file './COPYING' not found
Makefile.am: 'automake --add-missing' can install 'COPYING'
Solution 2:
Add the foreign option to AUTOMAKE_OPTIONS.
Problem 3:
doc/Makefile.am:20: error: support for Cygnus-style trees has been removed
Solution 3:
Remove the cygnus options.
Problem 4:
Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
Solution 4:
Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is
already defined earlier).
Problem 5:
doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 5:
Rename .texinfo files to .texi.
Problem 6:
doc/Makefile.am: warning: Oops!
doc/Makefile.am: It appears this file (or files included by it) are triggering
doc/Makefile.am: an undocumented, soon-to-be-removed automake hack.
doc/Makefile.am: Future automake versions will no longer place in the builddir
doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that
doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or
doc/Makefile.am: DISTCLEANFILES.
doc/Makefile.am: If you want your '.info' files to be placed in the builddir
doc/Makefile.am: rather than in the srcdir, you have to use the shiny new
doc/Makefile.am: 'info-in-builddir' automake option.
Solution 6:
Remove the hack at the bottom of doc/Makefile.am and use
the info-in-builddir automake option.
Problem 7:
doc/Makefile.am:35: error: required file '../texinfo.tex' not found
doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex'
Solution 7:
Use the no-texinfo.tex automake option. We also have one in
texinfo/texinfo.tex, not sure if we should point to that, or move it
(or a newer version of it added with automake --add-missing) to
top-level.
Problem 8:
Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory,
Makefile.am:131: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled. For now, the corresponding output
automake: object file(s) will be placed in the top-level directory. However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Solution 8:
Use subdir-objects, that means adjusting references to some .o that will now
be in config/.
Problem 9:
configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from...
../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from...
../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from...
../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from...
../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from...
configure.ac:375: the top level
Solution 9:
Use AC_LANG_SOURCE, or use proper quoting.
Problem 10 (in intl/):
configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS
/usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from...
/usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from...
/usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from...
/usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from...
/usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from...
/usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from...
/usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from...
configure.ac:7: the top level
Solution 10:
Add AC_USE_SYSTEM_EXTENSIONS in configure.ac.
ChangeLog:
* libtool.m4: Use AC_LANG_SOURCE.
* configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE.
* README-maintainer-mode: Update version requirements.
* ar-lib: New file.
* test-driver: New file.
* configure: Re-generate.
bfd/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
(INCLUDES): Rename to ...
(AM_CPPFLAGS): ... this.
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add
info-in-builddir no-texinfo.tex.
(info_TEXINFOS): Rename bfd.texinfo to bfd.texi.
* doc/bfd.texinfo: Rename to ...
* doc/bfd.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
binutils/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add
info-in-builddir no-texinfo.tex.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
config/ChangeLog:
* override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69.
etc/ChangeLog:
* configure.in: Remove AC_PREREQ.
* configure: Re-generate.
gas/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects.
(TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix.
* configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles,
extra_objects): Add config/ prefix.
* doc/as.texinfo: Rename to...
* doc/as.texi: ... this.
* doc/Makefile.am: Rename as.texinfo to as.texi throughout.
Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and
info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
* doc/Makefile.in: Re-generate.
gdb/ChangeLog:
* common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION,
PACKAGE_STRING, PACKAGE_TARNAME): Undefine.
* configure.ac: Remove AC_PREREQ, add missing quoting.
* gnulib/configure.ac: Modernize usage of
AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ.
* gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69.
(AUTOMAKE_VERSION): Bump to 1.15.1.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
* gnulib/aclocal.m4: Re-generate.
* gnulib/config.in: Re-generate.
* gnulib/configure: Re-generate.
* gnulib/import/Makefile.in: Re-generate.
gdb/gdbserver/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting.
* configure: Re-generate.
* config.in: Re-generate.
* aclocal.m4: Re-generate.
gdb/testsuite/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
gold/ChangeLog:
* configure.ac: Remove AC_PREREQ, add missing quoting and usage
of AC_LANG_SOURCE.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* testsuite/Makefile.in: Re-generate.
gprof/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack.
(AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* gconfig.in: Re-generate.
intl/ChangeLog:
* configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ.
* configure: Re-generate.
* config.h.in: Re-generate.
* aclocal.m4: Re-generate.
ld/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to
ld.texi, ldint.texinfo to ldint.texi throughout.
(AUTOMAKE_OPTIONS): Add info-in-builddir.
* README: Rename ld.texinfo to ld.texi, ldint.texinfo to
ldint.texi throughout.
* gen-doc.texi: Likewise.
* h8-doc.texi: Likewise.
* ld.texinfo: Rename to ...
* ld.texi: ... this.
* ldint.texinfo: Rename to ...
* ldint.texi: ... this.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* config.in: Re-generate.
* configure: Re-generate.
libdecnumber/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* aclocal.m4.
libiberty/ChangeLog:
* configure.ac: Remove AC_PREREQ.
* configure: Re-generate.
* config.in: Re-generate.
opcodes/ChangeLog:
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
readline/ChangeLog.gdb:
* configure: Re-generate.
* examples/rlfe/configure: Re-generate.
sim/ChangeLog:
* All configure.ac: Remove AC_PREREQ.
* All configure: Re-generate.
zlib/ChangeLog.bin-gdb:
* configure.ac: Modernize AC_INIT call, remove AC_PREREQ.
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add
foreign.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
---
etc/ChangeLog | 5 +
etc/configure | 445 +++++++++++++++++++++++++++--------------------
etc/configure.in | 1 -
3 files changed, 257 insertions(+), 194 deletions(-)
diff --git a/etc/ChangeLog b/etc/ChangeLog
index 3139d8ec7f05..78e9366e349a 100644
--- a/etc/ChangeLog
+++ b/etc/ChangeLog
@@ -1,3 +1,8 @@
+2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
+
+ * configure.in: Remove AC_PREREQ.
+ * configure: Re-generate.
+
2018-01-03 Alan Modra <amodra@gmail.com>
* add-log.el: Update copyright year range.
diff --git a/etc/configure b/etc/configure
index 2f8192a4e49a..60a8feccb8a1 100755
--- a/etc/configure
+++ b/etc/configure
@@ -1,10 +1,10 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.64.
+# Generated by GNU Autoconf 2.69.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
-# Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
@@ -87,6 +87,7 @@ fi
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -131,6 +132,31 @@ export LANGUAGE
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
@@ -164,7 +190,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
else
exitcode=1; echo positional parameters were not saved.
fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
@@ -208,14 +235,25 @@ IFS=$as_save_IFS
if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
fi
if test x$as_have_required = xno; then :
@@ -313,10 +351,18 @@ $as_echo X"$as_dir" |
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -353,19 +399,19 @@ else
fi # as_fn_arith
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
- $as_echo "$as_me: error: $1" >&2
+ $as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
@@ -438,6 +484,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
@@ -472,16 +522,16 @@ if (echo >conf$$.file) 2>/dev/null; then
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
@@ -493,28 +543,8 @@ else
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -523,10 +553,11 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-exec 7<&0 </dev/null 6>&1
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
@@ -665,8 +696,9 @@ do
fi
case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
@@ -711,7 +743,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -737,7 +769,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
+ as_fn_error $? "invalid feature name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -941,7 +973,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -957,7 +989,7 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
+ as_fn_error $? "invalid package name: $ac_useropt"
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -987,8 +1019,8 @@ do
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) as_fn_error "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information."
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
;;
*=*)
@@ -996,7 +1028,7 @@ Try \`$0 --help' for more information."
# Reject names that are not valid shell variable names.
case $ac_envvar in #(
'' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
esac
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
@@ -1006,7 +1038,7 @@ Try \`$0 --help' for more information."
$as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
$as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
;;
esac
@@ -1014,13 +1046,13 @@ done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error "missing argument to $ac_option"
+ as_fn_error $? "missing argument to $ac_option"
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
*) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
@@ -1043,7 +1075,7 @@ do
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
done
# There might be people who depend on the old broken behavior: `$host'
@@ -1057,8 +1089,6 @@ target=$target_alias
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
@@ -1073,9 +1103,9 @@ test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error "working directory cannot be determined"
+ as_fn_error $? "working directory cannot be determined"
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error "pwd does not report name of working directory"
+ as_fn_error $? "pwd does not report name of working directory"
# Find the source files, if location was not specified.
@@ -1114,11 +1144,11 @@ else
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1158,7 +1188,7 @@ Configuration:
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
+ -q, --quiet, --silent do not print \`checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
@@ -1279,9 +1309,9 @@ test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
configure
-generated by GNU Autoconf 2.64
+generated by GNU Autoconf 2.69
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
@@ -1296,7 +1326,7 @@ This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
-generated by GNU Autoconf 2.64. Invocation command line was
+generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -1406,11 +1436,9 @@ trap 'exit_status=$?
{
echo
- cat <<\_ASBOX
-## ---------------- ##
+ $as_echo "## ---------------- ##
## Cache variables. ##
-## ---------------- ##
-_ASBOX
+## ---------------- ##"
echo
# The following way of writing the cache mishandles newlines in values,
(
@@ -1444,11 +1472,9 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
)
echo
- cat <<\_ASBOX
-## ----------------- ##
+ $as_echo "## ----------------- ##
## Output variables. ##
-## ----------------- ##
-_ASBOX
+## ----------------- ##"
echo
for ac_var in $ac_subst_vars
do
@@ -1461,11 +1487,9 @@ _ASBOX
echo
if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
+ $as_echo "## ------------------- ##
## File substitutions. ##
-## ------------------- ##
-_ASBOX
+## ------------------- ##"
echo
for ac_var in $ac_subst_files
do
@@ -1479,11 +1503,9 @@ _ASBOX
fi
if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
+ $as_echo "## ----------- ##
## confdefs.h. ##
-## ----------- ##
-_ASBOX
+## ----------- ##"
echo
cat confdefs.h
echo
@@ -1538,7 +1560,12 @@ _ACEOF
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
- ac_site_file1=$CONFIG_SITE
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
elif test "x$prefix" != xNONE; then
ac_site_file1=$prefix/share/config.site
ac_site_file2=$prefix/etc/config.site
@@ -1549,18 +1576,22 @@ fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
- if test -r "$ac_site_file"; then
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
fi
done
if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
@@ -1629,7 +1660,7 @@ if $ac_cache_corrupted; then
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
fi
## -------------------- ##
## Main body of script. ##
@@ -1645,16 +1676,22 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- for ac_t in install-sh install.sh shtool; do
- if test -f "$ac_dir/$ac_t"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/$ac_t -c"
- break 2
- fi
- done
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
done
if test -z "$ac_aux_dir"; then
- as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
fi
# These three variables are undocumented and unsupported,
@@ -1683,7 +1720,7 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then :
+if ${ac_cv_path_install+:} false; then :
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -1703,7 +1740,7 @@ case $as_dir/ in #((
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
@@ -1767,7 +1804,7 @@ if test "${enable_maintainer_mode+set}" = set; then :
enableval=$enable_maintainer_mode; case ${enable_maintainer_mode} in
yes) MAINT='' ;;
no) MAINT='#' ;;
- *) as_fn_error "--enable-maintainer-mode must be yes or no" "$LINENO" 5 ;;
+ *) as_fn_error $? "--enable-maintainer-mode must be yes or no" "$LINENO" 5 ;;
esac
maintainer_mode=${enableval}
else
@@ -1846,10 +1883,21 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
:end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
+ if test "x$cache_file" != "x/dev/null"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
$as_echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
@@ -1901,6 +1949,7 @@ DEFS=`sed -n "$ac_script" confdefs.h`
ac_libobjs=
ac_ltlibobjs=
+U=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
@@ -1916,7 +1965,7 @@ LTLIBOBJS=$ac_ltlibobjs
-: ${CONFIG_STATUS=./config.status}
+: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
@@ -2017,6 +2066,7 @@ fi
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
case $0 in #((
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2062,19 +2112,19 @@ export LANGUAGE
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
+# script with STATUS, using 1 if that was 0.
as_fn_error ()
{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
fi
- $as_echo "$as_me: error: $1" >&2
+ $as_echo "$as_me: error: $2" >&2
as_fn_exit $as_status
} # as_fn_error
@@ -2212,16 +2262,16 @@ if (echo >conf$$.file) 2>/dev/null; then
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
@@ -2270,7 +2320,7 @@ $as_echo X"$as_dir" |
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
} # as_fn_mkdir_p
@@ -2281,28 +2331,16 @@ else
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -2324,7 +2362,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# values after options handling.
ac_log="
This file was extended by $as_me, which was
-generated by GNU Autoconf 2.64. Invocation command line was
+generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@@ -2359,6 +2397,7 @@ Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
@@ -2373,12 +2412,13 @@ Report bugs to the package provider."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
config.status
-configured by $0, generated by GNU Autoconf 2.64,
- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
-Copyright (C) 2009 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
@@ -2394,11 +2434,16 @@ ac_need_defaults=:
while test $# != 0
do
case $1 in
- --*=*)
+ --*=?*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
*)
ac_option=$1
ac_optarg=$2
@@ -2412,12 +2457,15 @@ do
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
$as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
case $ac_optarg in
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
esac
as_fn_append CONFIG_FILES " '$ac_optarg'"
ac_need_defaults=false;;
@@ -2428,7 +2476,7 @@ do
ac_cs_silent=: ;;
# This is an error.
- -*) as_fn_error "unrecognized option: \`$1'
+ -*) as_fn_error $? "unrecognized option: \`$1'
Try \`$0 --help' for more information." ;;
*) as_fn_append ac_config_targets " $1"
@@ -2448,7 +2496,7 @@ fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
@@ -2479,7 +2527,7 @@ do
case $ac_config_target in
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
done
@@ -2500,9 +2548,10 @@ fi
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
- tmp=
+ tmp= ac_tmp=
trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
' 0
trap 'as_fn_exit 1' 1 2 13 15
}
@@ -2510,12 +2559,13 @@ $debug ||
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
+ test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
# Set up the scripts for CONFIG_FILES section.
# No need to generate them if there are no CONFIG_FILES.
@@ -2532,12 +2582,12 @@ if test "x$ac_cr" = x; then
fi
ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\r'
+ ac_cs_awk_cr='\\r'
else
ac_cs_awk_cr=$ac_cr
fi
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
_ACEOF
@@ -2546,18 +2596,18 @@ _ACEOF
echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
echo "_ACEOF"
} >conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
. ./conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
if test $ac_delim_n = $ac_delim_num; then
break
elif $ac_last_try; then
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
@@ -2565,7 +2615,7 @@ done
rm -f conf$$subs.sh
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
_ACEOF
sed -n '
h
@@ -2579,7 +2629,7 @@ s/'"$ac_delim"'$//
t delim
:nl
h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
@@ -2593,7 +2643,7 @@ s/.\{148\}//
t nl
:delim
h
-s/\(.\{148\}\).*/\1/
+s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p
@@ -2613,7 +2663,7 @@ t delim
rm -f conf$$subs.awk
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
for (key in S) S_is_set[key] = 1
FS = "\a"
@@ -2645,21 +2695,29 @@ if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
else
cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || as_fn_error "could not setup config files machinery" "$LINENO" 5
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
_ACEOF
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
s/^[^=]*=[ ]*$//
}'
fi
@@ -2677,7 +2735,7 @@ do
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
- :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
@@ -2696,7 +2754,7 @@ do
for ac_f
do
case $ac_f in
- -) ac_f="$tmp/stdin";;
+ -) ac_f="$ac_tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
@@ -2705,7 +2763,7 @@ do
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
- as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
esac
case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
as_fn_append ac_file_inputs " '$ac_f'"
@@ -2731,8 +2789,8 @@ $as_echo "$as_me: creating $ac_file" >&6;}
esac
case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
esac
;;
esac
@@ -2862,23 +2920,24 @@ s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
$ac_datarootdir_hack
"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
+which seems to be undefined. Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
+which seems to be undefined. Please make sure it is defined" >&2;}
- rm -f "$tmp/stdin"
+ rm -f "$ac_tmp/stdin"
case $ac_file in
- -) cat "$tmp/out" && rm -f "$tmp/out";;
- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
esac \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
;;
@@ -2893,7 +2952,7 @@ _ACEOF
ac_clean_files=$ac_clean_files_save
test $ac_write_fail = 0 ||
- as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
# configure is writing to config.log, and then calls config.status.
@@ -2914,7 +2973,7 @@ if test "$no_create" != yes; then
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit $?
+ $ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
diff --git a/etc/configure.in b/etc/configure.in
index 6b94aac00c7b..0e39559aa2eb 100644
--- a/etc/configure.in
+++ b/etc/configure.in
@@ -1,5 +1,4 @@
dnl Process this file with autoconf to produce a configure script.
-AC_PREREQ(2.5)
AC_INIT(Makefile.in)
AC_PROG_INSTALL
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 06/12] Update year range in copyright notice of binutils files
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (4 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 05/12] Bump to autoconf 2.69 and automake 1.15.1 Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 07/12] texi2pod.pl: import support for @t{...} from gcc Mike Frysinger
` (6 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Alan Modra <amodra@gmail.com>
---
etc/add-log.el | 2 +-
etc/texi2pod.pl | 2 +-
etc/update-copyright.py | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/etc/add-log.el b/etc/add-log.el
index 84573eed1589..5359f97812dd 100644
--- a/etc/add-log.el
+++ b/etc/add-log.el
@@ -25,7 +25,7 @@
;;; add-log.el --- change log maintenance commands for Emacs
-;; Copyright (C) 1985-2018 Free Software Foundation, Inc.
+;; Copyright (C) 1985-2019 Free Software Foundation, Inc.
;; Keywords: maint
diff --git a/etc/texi2pod.pl b/etc/texi2pod.pl
index f4721f45e1c7..b0540338c8ec 100644
--- a/etc/texi2pod.pl
+++ b/etc/texi2pod.pl
@@ -1,6 +1,6 @@
#! /usr/bin/perl -w
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999-2019 Free Software Foundation, Inc.
# This file is part of GCC.
diff --git a/etc/update-copyright.py b/etc/update-copyright.py
index f9f505827b34..4579fcd8b102 100755
--- a/etc/update-copyright.py
+++ b/etc/update-copyright.py
@@ -1,6 +1,6 @@
#!/usr/bin/python
#
-# Copyright (C) 2013-2018 Free Software Foundation, Inc.
+# Copyright (C) 2013-2019 Free Software Foundation, Inc.
#
# This script is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 07/12] texi2pod.pl: import support for @t{...} from gcc
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (5 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 06/12] Update year range in copyright notice of binutils files Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 08/12] Add libctf to update-copyright.py Mike Frysinger
` (5 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Simon Marchi <simon.marchi@polymtl.ca>
GDB's man page source (in gdb.texinfo) contains:
@t{++}
The @t{...} part is supposed to display the wrapped text with a
fixed-width font. The texi2pod.pl script currently doesn't handle
@t{...}, so it appears as-is in the man page:
You can use GDB to debug programs written in C, C@t{++}, Fortran and Modula-2.
gcc's version of texi2pod.pl (at contrib/texi2pod.pl in gcc's repo)
replaces @t{...} with the wrapped text as-is, which I think is an
acceptable behavior. The fixed-width font distinction is not really
important for a man page, where the text will be displayed with whatever
font the user is using.
Import the line that does that from gcc's version.
I have verified that there is no other, unwanted change in man pages
generated in binutils' and GDB's doc, with this patch applied.
etc/ChangeLog:
* texi2pod.pl: Handle @t{...} tags.
---
etc/ChangeLog | 4 ++++
etc/texi2pod.pl | 1 +
2 files changed, 5 insertions(+)
diff --git a/etc/ChangeLog b/etc/ChangeLog
index 78e9366e349a..8742e2afc15d 100644
--- a/etc/ChangeLog
+++ b/etc/ChangeLog
@@ -1,3 +1,7 @@
+2020-01-15 Simon Marchi <simon.marchi@polymtl.ca>
+
+ * texi2pod.pl: Handle @t{...} tags.
+
2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
* configure.in: Remove AC_PREREQ.
diff --git a/etc/texi2pod.pl b/etc/texi2pod.pl
index b0540338c8ec..8d92bcf6023b 100644
--- a/etc/texi2pod.pl
+++ b/etc/texi2pod.pl
@@ -381,6 +381,7 @@ sub postprocess
s/\@file\{([^\}]*)\}/F<$1>/g;
s/\@w\{([^\}]*)\}/S<$1>/g;
s/\@(?:dmn|math)\{([^\}]*)\}/$1/g;
+ s/\@t\{([^\}]*)\}/$1/g;
# keep references of the form @ref{...}, print them bold
s/\@(?:ref)\{([^\}]*)\}/B<$1>/g;
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 08/12] Add libctf to update-copyright.py
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (6 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 07/12] texi2pod.pl: import support for @t{...} from gcc Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 09/12] Update year range in copyright notice of binutils files Mike Frysinger
` (4 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Alan Modra <amodra@gmail.com>
---
etc/ChangeLog | 4 ++++
etc/update-copyright.py | 2 ++
2 files changed, 6 insertions(+)
diff --git a/etc/ChangeLog b/etc/ChangeLog
index 8742e2afc15d..33abc09278bb 100644
--- a/etc/ChangeLog
+++ b/etc/ChangeLog
@@ -1,3 +1,7 @@
+2021-01-01 Alan Modra <amodra@gmail.com>
+
+ * update-copyright.py (BinutilsCmdLine.__init__): Add libctf.
+
2020-01-15 Simon Marchi <simon.marchi@polymtl.ca>
* texi2pod.pl: Handle @t{...} tags.
diff --git a/etc/update-copyright.py b/etc/update-copyright.py
index 4579fcd8b102..c39c0a7d5562 100755
--- a/etc/update-copyright.py
+++ b/etc/update-copyright.py
@@ -597,6 +597,7 @@ class BinutilsCmdLine (CmdLine):
self.add_dir ('gprof')
self.add_dir ('include')
self.add_dir ('ld', LdFilter())
+ self.add_dir ('libctf')
self.add_dir ('libdecnumber')
self.add_dir ('libiberty')
self.add_dir ('opcodes')
@@ -613,6 +614,7 @@ class BinutilsCmdLine (CmdLine):
'gprof',
'include',
'ld',
+ 'libctf',
'libiberty',
'opcodes',
]
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 09/12] Update year range in copyright notice of binutils files
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (7 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 08/12] Add libctf to update-copyright.py Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 10/12] texi2pod.pl: add no-op --no-split option support [PR28144] Mike Frysinger
` (3 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Alan Modra <amodra@gmail.com>
---
etc/add-log.el | 2 +-
etc/texi2pod.pl | 2 +-
etc/update-copyright.py | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/etc/add-log.el b/etc/add-log.el
index 5359f97812dd..eb15e30f50f0 100644
--- a/etc/add-log.el
+++ b/etc/add-log.el
@@ -25,7 +25,7 @@
;;; add-log.el --- change log maintenance commands for Emacs
-;; Copyright (C) 1985-2019 Free Software Foundation, Inc.
+;; Copyright (C) 1985-2021 Free Software Foundation, Inc.
;; Keywords: maint
diff --git a/etc/texi2pod.pl b/etc/texi2pod.pl
index 8d92bcf6023b..11f70d156bee 100644
--- a/etc/texi2pod.pl
+++ b/etc/texi2pod.pl
@@ -1,6 +1,6 @@
#! /usr/bin/perl -w
-# Copyright (C) 1999-2019 Free Software Foundation, Inc.
+# Copyright (C) 1999-2021 Free Software Foundation, Inc.
# This file is part of GCC.
diff --git a/etc/update-copyright.py b/etc/update-copyright.py
index c39c0a7d5562..7f605d058300 100755
--- a/etc/update-copyright.py
+++ b/etc/update-copyright.py
@@ -1,6 +1,6 @@
#!/usr/bin/python
#
-# Copyright (C) 2013-2019 Free Software Foundation, Inc.
+# Copyright (C) 2013-2021 Free Software Foundation, Inc.
#
# This script is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 10/12] texi2pod.pl: add no-op --no-split option support [PR28144]
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (8 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 09/12] Update year range in copyright notice of binutils files Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 11/12] etc: rename configure.in to configure.ac Mike Frysinger
` (2 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
From: Sergei Trofimovich <siarheit@google.com>
Change 2faf902da ("generate single html manual page by default")
added use of --no-split option to makeinfo. binutils reuses
makeinfo options for texi2pod.pl wrapper. Unsupported option
led to silent manpage truncation.
The change adds no-op option support.
etc/
* texi2pod.pl: Handle no-op --no-split option.
---
etc/texi2pod.pl | 2 ++
1 file changed, 2 insertions(+)
diff --git a/etc/texi2pod.pl b/etc/texi2pod.pl
index 11f70d156bee..dcf2b437640f 100644
--- a/etc/texi2pod.pl
+++ b/etc/texi2pod.pl
@@ -59,6 +59,8 @@ while ($_ = shift) {
$flag = shift;
}
push (@ipath, $flag);
+ } elsif (/^--no-split$/) {
+ # ignore option for makeinfo compatibility
} elsif (/^-/) {
usage();
} else {
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 11/12] etc: rename configure.in to configure.ac
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (9 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 10/12] texi2pod.pl: add no-op --no-split option support [PR28144] Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 0:14 ` [PATCH 12/12] etc: switch to automake Mike Frysinger
2021-11-10 10:54 ` [PATCH 00/12] sync etc/ to bfd/gdb tree Corinna Vinschen
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
The .in name has been deprecated for a long time in favor of .ac.
---
etc/{configure.in => configure.ac} | 0
1 file changed, 0 insertions(+), 0 deletions(-)
rename etc/{configure.in => configure.ac} (100%)
diff --git a/etc/configure.in b/etc/configure.ac
similarity index 100%
rename from etc/configure.in
rename to etc/configure.ac
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 12/12] etc: switch to automake
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (10 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 11/12] etc: rename configure.in to configure.ac Mike Frysinger
@ 2021-11-10 0:14 ` Mike Frysinger
2021-11-10 10:54 ` [PATCH 00/12] sync etc/ to bfd/gdb tree Corinna Vinschen
12 siblings, 0 replies; 14+ messages in thread
From: Mike Frysinger @ 2021-11-10 0:14 UTC (permalink / raw)
To: newlib
There's no content in here currently, so switching to automake is
pretty easy with a stub file.
---
etc/Makefile.am | 19 ++
etc/Makefile.in | 407 ++++++++++++++++++++----
etc/aclocal.m4 | 792 +++++++++++++++++++++++++++++++++++++++++++++++
etc/configure | 645 ++++++++++++++++++++++++++++++++++++--
etc/configure.ac | 29 +-
5 files changed, 1787 insertions(+), 105 deletions(-)
create mode 100644 etc/Makefile.am
create mode 100644 etc/aclocal.m4
diff --git a/etc/Makefile.am b/etc/Makefile.am
new file mode 100644
index 000000000000..1cd647167e3f
--- /dev/null
+++ b/etc/Makefile.am
@@ -0,0 +1,19 @@
+## Process this file with automake to generate Makefile.in
+#
+# Copyright (C) 1992-2021 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+AUTOMAKE_OPTIONS = foreign no-dist
+ACLOCAL_AMFLAGS = -I.. -I../config
diff --git a/etc/Makefile.in b/etc/Makefile.in
index 4aa64c11488d..1cfdbf45fde6 100644
--- a/etc/Makefile.in
+++ b/etc/Makefile.in
@@ -1,74 +1,375 @@
-#
-# Makefile.in for etc
-#
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
-DESTDIR =
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-prefix = @prefix@
-exec_prefix = @exec_prefix@
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-srcdir = @srcdir@
-VPATH = @srcdir@
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
-bindir = @bindir@
-libdir = @libdir@
-tooldir = $(libdir)
-datadir = @datadir@
+@SET_MAKE@
-mandir = @mandir@
-man1dir = $(mandir)/man1
-man2dir = $(mandir)/man2
-man3dir = $(mandir)/man3
-man4dir = $(mandir)/man4
-man5dir = $(mandir)/man5
-man6dir = $(mandir)/man6
-man7dir = $(mandir)/man7
-man8dir = $(mandir)/man8
-man9dir = $(mandir)/man9
+#
+# Copyright (C) 1992-2021 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/override.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
-infodir = @infodir@
-pdfdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = foreign no-dist
+ACLOCAL_AMFLAGS = -I.. -I../config
+all: all-am
-SHELL = /bin/sh
+.SUFFIXES:
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
-#### Host, target, and site specific Makefile fragments come in here.
-###
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+tags TAGS:
-all:
+ctags CTAGS:
-clean:
+cscope cscopelist:
-mostlyclean: clean
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
-distclean: clean
- rm -f Makefile config.status config.cache
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-maintainer-clean realclean: distclean
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
-Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) \
- config.status
- $(SHELL) ./config.status
+clean-generic:
-AUTOCONF = autoconf
-configure_deps = $(srcdir)/configure.in
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-$(srcdir)/configure: @MAINT@ $(configure_deps)
- cd $(srcdir) && $(AUTOCONF)
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am am--refresh check check-am clean clean-generic \
+ cscopelist-am ctags-am distclean distclean-generic dvi dvi-am \
+ html html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
-config.status: $(srcdir)/configure
- $(SHELL) ./config.status --recheck
-## these last targets are for standards.texi conformance
-dist:
-check:
-info html dvi ps pdf:
-install install-strip install-info install-html install-pdf:
-installcheck:
-uninstall:
-TAGS:
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/etc/aclocal.m4 b/etc/aclocal.m4
new file mode 100644
index 000000000000..27228d7159c8
--- /dev/null
+++ b/etc/aclocal.m4
@@ -0,0 +1,792 @@
+# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 2002-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.15'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.15.1], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.15.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+ [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+ am_maintainer_other[ make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
+
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../config/lead-dot.m4])
+m4_include([../config/override.m4])
diff --git a/etc/configure b/etc/configure
index 60a8feccb8a1..a1fccb42788a 100755
--- a/etc/configure
+++ b/etc/configure
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69.
+# Generated by GNU Autoconf 2.69 for etc 0.
#
#
# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
@@ -574,20 +574,45 @@ MFLAGS=
MAKEFLAGS=
# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-PACKAGE_URL=
-
-ac_unique_file="Makefile.in"
+PACKAGE_NAME='etc'
+PACKAGE_TARNAME='etc'
+PACKAGE_VERSION='0'
+PACKAGE_STRING='etc 0'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
+
ac_subst_vars='LTLIBOBJS
LIBOBJS
-MAINT
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
INSTALL_DATA
INSTALL_SCRIPT
INSTALL_PROGRAM
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
target_alias
host_alias
build_alias
@@ -630,6 +655,7 @@ ac_subst_files=''
ac_user_opts='
enable_option_checking
enable_maintainer_mode
+enable_silent_rules
'
ac_precious_vars='build_alias
host_alias
@@ -674,7 +700,7 @@ sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
@@ -1174,7 +1200,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
+\`configure' configures etc 0 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1222,7 +1248,7 @@ Fine tuning of the installation directories:
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/etc]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
@@ -1230,11 +1256,18 @@ Fine tuning of the installation directories:
_ACEOF
cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
_ACEOF
fi
if test -n "$ac_init_help"; then
-
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of etc 0:";;
+ esac
cat <<\_ACEOF
Optional Features:
@@ -1244,6 +1277,8 @@ Optional Features:
--enable-maintainer-mode
enable make rules and dependencies not useful (and
sometimes confusing) to the casual installer
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
Report bugs to the package provider.
_ACEOF
@@ -1308,7 +1343,7 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-configure
+etc configure 0
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1325,7 +1360,7 @@ cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by $as_me, which was
+It was created by etc $as_me 0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -1674,6 +1709,34 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+am__api_version='1.15'
+
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
if test -f "$ac_dir/install-sh"; then
@@ -1796,26 +1859,529 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
-# Command-line options.
-# Very limited version of AC_MAINTAINER_MODE.
-# Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then :
- enableval=$enable_maintainer_mode; case ${enable_maintainer_mode} in
- yes) MAINT='' ;;
- no) MAINT='#' ;;
- *) as_fn_error $? "--enable-maintainer-mode must be yes or no" "$LINENO" 5 ;;
- esac
- maintainer_mode=${enableval}
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
else
- MAINT='#'
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
fi
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='etc'
+ VERSION='0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
ac_config_files="$ac_config_files Makefile"
@@ -1964,6 +2530,19 @@ LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+
: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
@@ -2361,7 +2940,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by $as_me, which was
+This file was extended by etc $as_me 0, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -2414,7 +2993,7 @@ _ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-config.status
+etc config.status 0
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
@@ -2425,6 +3004,8 @@ gives unlimited permission to copy, distribute and modify it."
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
test -n "\$AWK" || AWK=awk
_ACEOF
@@ -2864,6 +3445,11 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
@@ -2918,6 +3504,7 @@ s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
diff --git a/etc/configure.ac b/etc/configure.ac
index 0e39559aa2eb..ce972ec088ea 100644
--- a/etc/configure.ac
+++ b/etc/configure.ac
@@ -1,26 +1,9 @@
dnl Process this file with autoconf to produce a configure script.
-AC_INIT(Makefile.in)
+AC_INIT([etc], [0])
-AC_PROG_INSTALL
+AM_MAINTAINER_MODE
+AM_INIT_AUTOMAKE
+AM_SILENT_RULES([yes])
-# Command-line options.
-# Very limited version of AC_MAINTAINER_MODE.
-AC_ARG_ENABLE([maintainer-mode],
- [AC_HELP_STRING([--enable-maintainer-mode],
- [enable make rules and dependencies not useful (and
- sometimes confusing) to the casual installer])],
- [case ${enable_maintainer_mode} in
- yes) MAINT='' ;;
- no) MAINT='#' ;;
- *) AC_MSG_ERROR([--enable-maintainer-mode must be yes or no]) ;;
- esac
- maintainer_mode=${enableval}],
- [MAINT='#'])
-AC_SUBST([MAINT])dnl
-
-AC_SUBST(datarootdir)
-AC_SUBST(docdir)
-AC_SUBST(htmldir)
-AC_SUBST(pdfdir)
-
-AC_OUTPUT(Makefile)
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
--
2.33.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 00/12] sync etc/ to bfd/gdb tree
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
` (11 preceding siblings ...)
2021-11-10 0:14 ` [PATCH 12/12] etc: switch to automake Mike Frysinger
@ 2021-11-10 10:54 ` Corinna Vinschen
12 siblings, 0 replies; 14+ messages in thread
From: Corinna Vinschen @ 2021-11-10 10:54 UTC (permalink / raw)
To: newlib
On Nov 9 19:14, Mike Frysinger wrote:
> This pulls in all the commits that updated etc/ since it was last updated.
>
> Alan Modra (5):
> update-copyright.py for binutils
> Update year range in copyright notice of binutils files
> Update year range in copyright notice of binutils files
> Add libctf to update-copyright.py
> Update year range in copyright notice of binutils files
>
> Mike Frysinger (2):
> etc: rename configure.in to configure.ac
> etc: switch to automake
>
> Nick Clifton (2):
> Fix compile time warning messages building with gcc v6.1.1
> Update the address of the FSF in the copyright notice of files which
> were using the old address.
>
> Sergei Trofimovich (1):
> texi2pod.pl: add no-op --no-split option support [PR28144]
>
> Simon Marchi (2):
> Bump to autoconf 2.69 and automake 1.15.1
> texi2pod.pl: import support for @t{...} from gcc
>
> COPYING.LIBGLOSS | 8 +-
> ChangeLog | 4 +
> etc/ChangeLog | 34 ++
> etc/Makefile.am | 19 +
> etc/Makefile.in | 407 +++++++++++++--
> etc/aclocal.m4 | 792 ++++++++++++++++++++++++++++
> etc/add-log.el | 8 +-
> etc/configure | 1086 +++++++++++++++++++++++++++++++--------
> etc/configure.ac | 9 +
> etc/configure.in | 27 -
> etc/texi2pod.pl | 7 +-
> etc/update-copyright.py | 622 ++++++++++++++++++++++
> 12 files changed, 2713 insertions(+), 310 deletions(-)
> create mode 100644 etc/Makefile.am
> create mode 100644 etc/aclocal.m4
> create mode 100644 etc/configure.ac
> delete mode 100644 etc/configure.in
> create mode 100755 etc/update-copyright.py
>
> --
> 2.33.0
LGTM. Please push.
Thanks,
Corinna
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2021-11-10 10:55 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-10 0:14 [PATCH 00/12] sync etc/ to bfd/gdb tree Mike Frysinger
2021-11-10 0:14 ` [PATCH 01/12] Fix compile time warning messages building with gcc v6.1.1 Mike Frysinger
2021-11-10 0:14 ` [PATCH 02/12] update-copyright.py for binutils Mike Frysinger
2021-11-10 0:14 ` [PATCH 03/12] Update the address of the FSF in the copyright notice of files which were using the old address Mike Frysinger
2021-11-10 0:14 ` [PATCH 04/12] Update year range in copyright notice of binutils files Mike Frysinger
2021-11-10 0:14 ` [PATCH 05/12] Bump to autoconf 2.69 and automake 1.15.1 Mike Frysinger
2021-11-10 0:14 ` [PATCH 06/12] Update year range in copyright notice of binutils files Mike Frysinger
2021-11-10 0:14 ` [PATCH 07/12] texi2pod.pl: import support for @t{...} from gcc Mike Frysinger
2021-11-10 0:14 ` [PATCH 08/12] Add libctf to update-copyright.py Mike Frysinger
2021-11-10 0:14 ` [PATCH 09/12] Update year range in copyright notice of binutils files Mike Frysinger
2021-11-10 0:14 ` [PATCH 10/12] texi2pod.pl: add no-op --no-split option support [PR28144] Mike Frysinger
2021-11-10 0:14 ` [PATCH 11/12] etc: rename configure.in to configure.ac Mike Frysinger
2021-11-10 0:14 ` [PATCH 12/12] etc: switch to automake Mike Frysinger
2021-11-10 10:54 ` [PATCH 00/12] sync etc/ to bfd/gdb tree Corinna Vinschen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).