[PATCH] libgloss: merge i960 into top-level Makefile

[PATCH] libgloss: merge i960 into top-level Makefile

[Mike Frysinger]

Avoid a recursive make to speed things up a bit.
I can't test this as current versions of binutils doesn't support i960.
---
 libgloss/Makefile.am       |   3 +
 libgloss/Makefile.in       | 206 +++++++++++++++++++++++--------------
 libgloss/configure         |  19 +++-
 libgloss/configure.ac      |   7 +-
 libgloss/i960/Makefile.in  | 107 -------------------
 libgloss/i960/Makefile.inc |  16 +++
 6 files changed, 166 insertions(+), 192 deletions(-)
 delete mode 100644 libgloss/i960/Makefile.in
 create mode 100644 libgloss/i960/Makefile.inc

diff --git a/libgloss/Makefile.am b/libgloss/Makefile.am
index 476db4742d76..92da21efd2ef 100644
--- a/libgloss/Makefile.am
+++ b/libgloss/Makefile.am
@@ -81,6 +81,9 @@ endif
 if CONFIG_D30V
 include d30v/Makefile.inc
 endif
+if CONFIG_I960
+include i960/Makefile.inc
+endif
 if CONFIG_IQ2000
 include iq2000/Makefile.inc
 endif
diff --git a/libgloss/configure.ac b/libgloss/configure.ac
index 1e0d74325b78..bc4421393d5c 100644
--- a/libgloss/configure.ac
+++ b/libgloss/configure.ac
@@ -87,8 +87,7 @@ case "${target}" in
 	subdirs="$subdirs pa"
 	;;
   i960-*-coff)
-	AC_CONFIG_FILES([i960/Makefile])
-	subdirs="$subdirs i960"
+	config_i960=true
 	;;
   sparc-*leon*-elf* | sparc-*leon*-none*)
 	AC_CONFIG_FILES([sparc_leon/Makefile])
@@ -248,8 +247,8 @@ AC_SUBST(subdirs)
 dnl These subdirs have converted to non-recursive make.  Hopefully someday all
 dnl the ports above will too!
 m4_foreach_w([SUBDIR], [
-  aarch64 arc arm bfin csky d30v iq2000 libnosys lm32 moxie nios2 riscv v850
-  wince xtensa
+  aarch64 arc arm bfin csky d30v i960 iq2000 libnosys lm32 moxie nios2 riscv
+  v850 wince xtensa
 ], [dnl
   AM_CONDITIONAL([CONFIG_]m4_toupper(SUBDIR), [test x$config_]SUBDIR = xtrue)
 ])
diff --git a/libgloss/i960/Makefile.in b/libgloss/i960/Makefile.in
deleted file mode 100644
index 0d1b80029e88..000000000000
--- a/libgloss/i960/Makefile.in
+++ /dev/null
@@ -1,107 +0,0 @@
-#
-#
-
-DESTDIR =
-VPATH = @srcdir@ @srcdir@/..
-srcdir = @srcdir@
-objdir = .
-srcroot = $(srcdir)/../..
-objroot = $(objdir)/../..
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-host_alias = @host_alias@
-target_alias = @target_alias@
-
-bindir = @bindir@
-libdir = @libdir@
-tooldir = $(exec_prefix)/$(target_alias)
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-
-# Multilib support variables.
-# TOP is used instead of MULTI{BUILD,SRC}TOP.
-MULTIDIRS =
-MULTISUBDIR =
-
-SHELL =	/bin/sh
-
-mkinstalldirs = $(SHELL) $(srcroot)/mkinstalldirs
-
-CC = @CC@
-
-AS = @AS@
-AR = @AR@
-LD = @LD@
-RANLIB = @RANLIB@
-
-OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
-	then echo ${objroot}/../binutils/objdump ; \
-	else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
-OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
-	then echo ${objroot}/../binutils/objcopy ; \
-	else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`
-
-OBJS		= putnum.o unlink.o
-CFLAGS		= -g
-SCRIPTS		= 
-
-# Here is all of the mon960 stuff
-MON_LDFLAGS	=
-MON_BSP		= libmon960.a
-MON_CRT0	= crt0.o
-MON_OBJS	= mon-read.o mon-write.o mon-syscalls.o mon960.o
-MON_SCRIPTS	= mon960.ld
-MON_INSTALL	= install-mon
-
-# Host specific makefile fragment comes in here.
-@host_makefile_frag@
-
-#
-# build a test program for each target board. Just trying to get
-# it to link is a good test, so we ignore all the errors for now.
-#
-all: ${MON_CRT0} ${MON_BSP}
-
-#
-# here's where we build the board support packages for each target
-#
-${MON_BSP}: ${OBJS} ${MON_OBJS}
-	${AR} ${ARFLAGS} ${MON_BSP} ${MON_OBJS} ${OBJS}
-	${RANLIB} ${MON_BSP}
-
-#
-#
-#
-.c.S:
-	${CC} ${CFLAGS_FOR_TARGET} -c $<
-
-mvme-crt0.o: mvme-crt0.S
-mvme-exit.o: mvme-exit.S
-mvme-inbyte.o: mvme-inbyte.S
-mvme-outbyte.o: mvme-outbyte.S
-
-clean mostlyclean:
-	rm -f a.out core *.i *.o *-test *.srec *.dis *.x
-
-distclean maintainer-clean realclean: clean
-	rm -f Makefile *~
-
-.PHONY: install info install-info clean-info
-install: ${MON_INSTALL}
-
-install-mon:
-	${mkinstalldirs} ${DESTDIR}${tooldir}/lib${MULTISUBDIR}
-	set -e; for x in ${MON_CRT0} ${MON_BSP}; do ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
-	set -e; for x in ${MON_SCRIPTS}; do ${INSTALL_DATA} ${srcdir}/$$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; done
-
-doc:
-info:
-install-info:
-clean-info:
-
-Makefile: Makefile.in ../config.status
-	cd .. && $(SHELL) config.status
diff --git a/libgloss/i960/Makefile.inc b/libgloss/i960/Makefile.inc
new file mode 100644
index 000000000000..3d1f58bb101a
--- /dev/null
+++ b/libgloss/i960/Makefile.inc
@@ -0,0 +1,16 @@
+multilibtool_DATA += \
+	%D%/crt0.o
+libobjs_a_SOURCES += \
+	%D%/crt0.c
+
+multilibtool_DATA += \
+	%D%/mon960.ld
+
+multilibtool_LIBRARIES += %D%/libmon960.a
+%C%_libmon960_a_SOURCES = \
+	putnum.c \
+	unlink.c \
+	%D%/mon-read.c \
+	%D%/mon-write.c \
+	%D%/mon-syscalls.S \
+	%D%/mon960.c
-- 
2.43.0