* GLIBC commit access
@ 2012-07-02 18:46 Maxim Kuvyrkov
2012-07-02 19:09 ` Roland McGrath
2012-07-09 13:23 ` Ian Lance Taylor
0 siblings, 2 replies; 14+ messages in thread
From: Maxim Kuvyrkov @ 2012-07-02 18:46 UTC (permalink / raw)
To: overseers; +Cc: Roland McGrath
Overseers,
Would you please add my sourceware account mkuvyrkov to glibc group?
Roland,
Would you please authorize me being added to glibc group? I'm now getting more involved with glibc development (versus previous EGLIBC development) and have several patches pending review/commit for 2.17.
Thank you,
--
Maxim Kuvyrkov
CodeSourcery / Mentor Graphics
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: GLIBC commit access
2012-07-02 18:46 GLIBC commit access Maxim Kuvyrkov
@ 2012-07-02 19:09 ` Roland McGrath
2012-07-09 13:23 ` Ian Lance Taylor
1 sibling, 0 replies; 14+ messages in thread
From: Roland McGrath @ 2012-07-02 19:09 UTC (permalink / raw)
To: Maxim Kuvyrkov; +Cc: overseers
Approved.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: GLIBC commit access
2012-07-02 18:46 GLIBC commit access Maxim Kuvyrkov
2012-07-02 19:09 ` Roland McGrath
@ 2012-07-09 13:23 ` Ian Lance Taylor
1 sibling, 0 replies; 14+ messages in thread
From: Ian Lance Taylor @ 2012-07-09 13:23 UTC (permalink / raw)
To: Maxim Kuvyrkov; +Cc: overseers, Roland McGrath
Maxim Kuvyrkov <maxim@codesourcery.com> writes:
> Would you please add my sourceware account mkuvyrkov to glibc group?
Done.
Ian
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: glibc commit access
2019-09-25 20:45 ` Alistair Francis
@ 2019-09-25 21:04 ` Carlos O'Donell
0 siblings, 0 replies; 14+ messages in thread
From: Carlos O'Donell @ 2019-09-25 21:04 UTC (permalink / raw)
To: Alistair Francis; +Cc: overseers, Alistair Francis
On 9/25/19 4:40 PM, Alistair Francis wrote:
> On Wed, Sep 25, 2019 at 1:08 PM Carlos O'Donell <carlos@redhat.com> wrote:
>> Tweaked. Please review?
>>
>> https://sourceware.org/glibc/wiki/MAINTAINERS#Becoming_a_maintainer_.28developer.29
>
> That is clearer.
>
> Maybe it's worth adding a note about people who already have accounts
> and want to join a new project?
Clarified a bit.
"* Individual developers, without an existing account, ..."
And so you should naturally go to the last bullet:
"* If you have an existing account you must..."
--
Cheers,
Carlos.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: glibc commit access
2019-09-25 20:08 ` Carlos O'Donell
@ 2019-09-25 20:45 ` Alistair Francis
2019-09-25 21:04 ` Carlos O'Donell
0 siblings, 1 reply; 14+ messages in thread
From: Alistair Francis @ 2019-09-25 20:45 UTC (permalink / raw)
To: Carlos O'Donell; +Cc: overseers, Alistair Francis
On Wed, Sep 25, 2019 at 1:08 PM Carlos O'Donell <carlos@redhat.com> wrote:
>
> On 9/25/19 1:50 PM, Christopher Faylor wrote:
> > On Wed, Sep 25, 2019 at 09:19:57AM -0700, Alistair Francis wrote:
> >> On Wed, Sep 25, 2019 at 8:22 AM Carlos O'Donell <carlos@redhat.com> wrote:
> >>>
> >>> On 9/25/19 10:07 AM, Christopher Faylor wrote:
> >>>> On Tue, Sep 24, 2019 at 10:11:28PM -0700, Alistair Francis wrote:
> >>>>> Overseers,
> >>>>>
> >>>>> Please add me (alistair23) to the glibc group after verifying with
> >>>>> carlos@redhat.com.
> >>>>>
> >>>>> carlos@redhat.com vouches for my sanity and competence.
> >>>>>
> >>>>> I truly understand FSF copyright protocols, and always respect
> >>>>> per-branch policies on what I am allowed to touch and how.
> >>>>
> >>>> An account was just added for you for the glibc project yesterday.
> >>>
> >>> Perfect. Does that mean we're all done?
> >>
> >> I'm not sure, according to
> >> https://sourceware.org/glibc/wiki/MAINTAINERS I still need to have
> >> write permission added.
> >
> > When you were provided with an account in the glibc project you were
> > put in the glibc group.
> >
> > After reading the above link, I can see why you thought that you needed
> > an additional step. That web page does seem to instruct that you have
> > to send email here. That's not required, however. The only reason to
> > send email here is if you already have an account on sourceware and are
> > not a member of the glibc project. Otherwise, the new project form is
> > enough.
> >
> > Could someone change wording at https://sourceware.org/glibc/wiki/MAINTAINERS
> > be tweaked to avoid this understandable confusion?
>
> Tweaked. Please review?
>
> https://sourceware.org/glibc/wiki/MAINTAINERS#Becoming_a_maintainer_.28developer.29
That is clearer.
Maybe it's worth adding a note about people who already have accounts
and want to join a new project?
Alistair
>
> --
> Cheers,
> Carlos.
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: glibc commit access
2019-09-25 17:50 ` Christopher Faylor
@ 2019-09-25 20:08 ` Carlos O'Donell
2019-09-25 20:45 ` Alistair Francis
0 siblings, 1 reply; 14+ messages in thread
From: Carlos O'Donell @ 2019-09-25 20:08 UTC (permalink / raw)
To: Alistair Francis, overseers, Alistair Francis
On 9/25/19 1:50 PM, Christopher Faylor wrote:
> On Wed, Sep 25, 2019 at 09:19:57AM -0700, Alistair Francis wrote:
>> On Wed, Sep 25, 2019 at 8:22 AM Carlos O'Donell <carlos@redhat.com> wrote:
>>>
>>> On 9/25/19 10:07 AM, Christopher Faylor wrote:
>>>> On Tue, Sep 24, 2019 at 10:11:28PM -0700, Alistair Francis wrote:
>>>>> Overseers,
>>>>>
>>>>> Please add me (alistair23) to the glibc group after verifying with
>>>>> carlos@redhat.com.
>>>>>
>>>>> carlos@redhat.com vouches for my sanity and competence.
>>>>>
>>>>> I truly understand FSF copyright protocols, and always respect
>>>>> per-branch policies on what I am allowed to touch and how.
>>>>
>>>> An account was just added for you for the glibc project yesterday.
>>>
>>> Perfect. Does that mean we're all done?
>>
>> I'm not sure, according to
>> https://sourceware.org/glibc/wiki/MAINTAINERS I still need to have
>> write permission added.
>
> When you were provided with an account in the glibc project you were
> put in the glibc group.
>
> After reading the above link, I can see why you thought that you needed
> an additional step. That web page does seem to instruct that you have
> to send email here. That's not required, however. The only reason to
> send email here is if you already have an account on sourceware and are
> not a member of the glibc project. Otherwise, the new project form is
> enough.
>
> Could someone change wording at https://sourceware.org/glibc/wiki/MAINTAINERS
> be tweaked to avoid this understandable confusion?
Tweaked. Please review?
https://sourceware.org/glibc/wiki/MAINTAINERS#Becoming_a_maintainer_.28developer.29
--
Cheers,
Carlos.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: glibc commit access
2019-09-25 16:24 ` Alistair Francis
2019-09-25 16:43 ` Carlos O'Donell
@ 2019-09-25 17:50 ` Christopher Faylor
2019-09-25 20:08 ` Carlos O'Donell
1 sibling, 1 reply; 14+ messages in thread
From: Christopher Faylor @ 2019-09-25 17:50 UTC (permalink / raw)
To: Alistair Francis; +Cc: Carlos O'Donell, overseers, Alistair Francis
On Wed, Sep 25, 2019 at 09:19:57AM -0700, Alistair Francis wrote:
>On Wed, Sep 25, 2019 at 8:22 AM Carlos O'Donell <carlos@redhat.com> wrote:
>>
>> On 9/25/19 10:07 AM, Christopher Faylor wrote:
>> > On Tue, Sep 24, 2019 at 10:11:28PM -0700, Alistair Francis wrote:
>> >> Overseers,
>> >>
>> >> Please add me (alistair23) to the glibc group after verifying with
>> >> carlos@redhat.com.
>> >>
>> >> carlos@redhat.com vouches for my sanity and competence.
>> >>
>> >> I truly understand FSF copyright protocols, and always respect
>> >> per-branch policies on what I am allowed to touch and how.
>> >
>> > An account was just added for you for the glibc project yesterday.
>>
>> Perfect. Does that mean we're all done?
>
>I'm not sure, according to
>https://sourceware.org/glibc/wiki/MAINTAINERS I still need to have
>write permission added.
When you were provided with an account in the glibc project you were
put in the glibc group.
After reading the above link, I can see why you thought that you needed
an additional step. That web page does seem to instruct that you have
to send email here. That's not required, however. The only reason to
send email here is if you already have an account on sourceware and are
not a member of the glibc project. Otherwise, the new project form is
enough.
Could someone change wording at https://sourceware.org/glibc/wiki/MAINTAINERS
be tweaked to avoid this understandable confusion?
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: glibc commit access
2019-09-25 16:24 ` Alistair Francis
@ 2019-09-25 16:43 ` Carlos O'Donell
2019-09-25 17:50 ` Christopher Faylor
1 sibling, 0 replies; 14+ messages in thread
From: Carlos O'Donell @ 2019-09-25 16:43 UTC (permalink / raw)
To: Alistair Francis; +Cc: overseers, Alistair Francis
On 9/25/19 12:19 PM, Alistair Francis wrote:
> On Wed, Sep 25, 2019 at 8:22 AM Carlos O'Donell <carlos@redhat.com> wrote:
>>
>> On 9/25/19 10:07 AM, Christopher Faylor wrote:
>>> On Tue, Sep 24, 2019 at 10:11:28PM -0700, Alistair Francis wrote:
>>>> Overseers,
>>>>
>>>> Please add me (alistair23) to the glibc group after verifying with
>>>> carlos@redhat.com.
>>>>
>>>> carlos@redhat.com vouches for my sanity and competence.
>>>>
>>>> I truly understand FSF copyright protocols, and always respect
>>>> per-branch policies on what I am allowed to touch and how.
>>>
>>> An account was just added for you for the glibc project yesterday.
>>
>> Perfect. Does that mean we're all done?
>
> I'm not sure, according to
> https://sourceware.org/glibc/wiki/MAINTAINERS I still need to have
> write permission added.
You have write permission, that's what Christopher is saying above.
Having "glibc" group permission gives you write access to the glibc repo.
> Also Carlos do you mind giving me wiki edit permission and adding me
> here: https://sourceware.org/glibc/wiki/EditorGroup. My wiki name is
> AlistairFrancis
Done.
> After that I should be almost done. Thanks for your help Carlos.
--
Cheers,
Carlos.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: glibc commit access
2019-09-25 15:22 ` Carlos O'Donell
@ 2019-09-25 16:24 ` Alistair Francis
2019-09-25 16:43 ` Carlos O'Donell
2019-09-25 17:50 ` Christopher Faylor
0 siblings, 2 replies; 14+ messages in thread
From: Alistair Francis @ 2019-09-25 16:24 UTC (permalink / raw)
To: Carlos O'Donell; +Cc: overseers, Alistair Francis
On Wed, Sep 25, 2019 at 8:22 AM Carlos O'Donell <carlos@redhat.com> wrote:
>
> On 9/25/19 10:07 AM, Christopher Faylor wrote:
> > On Tue, Sep 24, 2019 at 10:11:28PM -0700, Alistair Francis wrote:
> >> Overseers,
> >>
> >> Please add me (alistair23) to the glibc group after verifying with
> >> carlos@redhat.com.
> >>
> >> carlos@redhat.com vouches for my sanity and competence.
> >>
> >> I truly understand FSF copyright protocols, and always respect
> >> per-branch policies on what I am allowed to touch and how.
> >
> > An account was just added for you for the glibc project yesterday.
>
> Perfect. Does that mean we're all done?
I'm not sure, according to
https://sourceware.org/glibc/wiki/MAINTAINERS I still need to have
write permission added.
Also Carlos do you mind giving me wiki edit permission and adding me
here: https://sourceware.org/glibc/wiki/EditorGroup. My wiki name is
AlistairFrancis
After that I should be almost done. Thanks for your help Carlos.
Alistair
>
> --
> Cheers,
> Carlos.
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: glibc commit access
2019-09-25 14:07 ` Christopher Faylor
@ 2019-09-25 15:22 ` Carlos O'Donell
2019-09-25 16:24 ` Alistair Francis
0 siblings, 1 reply; 14+ messages in thread
From: Carlos O'Donell @ 2019-09-25 15:22 UTC (permalink / raw)
To: Alistair Francis, overseers, Alistair Francis
On 9/25/19 10:07 AM, Christopher Faylor wrote:
> On Tue, Sep 24, 2019 at 10:11:28PM -0700, Alistair Francis wrote:
>> Overseers,
>>
>> Please add me (alistair23) to the glibc group after verifying with
>> carlos@redhat.com.
>>
>> carlos@redhat.com vouches for my sanity and competence.
>>
>> I truly understand FSF copyright protocols, and always respect
>> per-branch policies on what I am allowed to touch and how.
>
> An account was just added for you for the glibc project yesterday.
Perfect. Does that mean we're all done?
--
Cheers,
Carlos.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: glibc commit access
2019-09-25 5:12 Alistair Francis
@ 2019-09-25 14:07 ` Christopher Faylor
2019-09-25 15:22 ` Carlos O'Donell
0 siblings, 1 reply; 14+ messages in thread
From: Christopher Faylor @ 2019-09-25 14:07 UTC (permalink / raw)
To: Alistair Francis; +Cc: overseers, Carlos O'Donell, Alistair Francis
On Tue, Sep 24, 2019 at 10:11:28PM -0700, Alistair Francis wrote:
>Overseers,
>
>Please add me (alistair23) to the glibc group after verifying with
>carlos@redhat.com.
>
>carlos@redhat.com vouches for my sanity and competence.
>
>I truly understand FSF copyright protocols, and always respect
>per-branch policies on what I am allowed to touch and how.
An account was just added for you for the glibc project yesterday.
^ permalink raw reply [flat|nested] 14+ messages in thread
* glibc commit access
@ 2019-09-25 5:12 Alistair Francis
2019-09-25 14:07 ` Christopher Faylor
0 siblings, 1 reply; 14+ messages in thread
From: Alistair Francis @ 2019-09-25 5:12 UTC (permalink / raw)
To: overseers; +Cc: Carlos O'Donell, Alistair Francis
Overseers,
Please add me (alistair23) to the glibc group after verifying with
carlos@redhat.com.
carlos@redhat.com vouches for my sanity and competence.
I truly understand FSF copyright protocols, and always respect
per-branch policies on what I am allowed to touch and how.
Thank you,
Alistair
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: glibc commit access
2013-10-09 19:53 glibc " Torvald Riegel
@ 2013-10-09 19:55 ` Frank Ch. Eigler
0 siblings, 0 replies; 14+ messages in thread
From: Frank Ch. Eigler @ 2013-10-09 19:55 UTC (permalink / raw)
To: Torvald Riegel; +Cc: overseers, Carlos O'Donell
Hi -
> I'd like to get commit access to the glibc repository. My account is
> torvald@gcc.gnu.org, which I suppose should work for glibc too. Carlos
> has authorized the access.
Done.
- FChE
^ permalink raw reply [flat|nested] 14+ messages in thread
* glibc commit access
@ 2013-10-09 19:53 Torvald Riegel
2013-10-09 19:55 ` Frank Ch. Eigler
0 siblings, 1 reply; 14+ messages in thread
From: Torvald Riegel @ 2013-10-09 19:53 UTC (permalink / raw)
To: overseers; +Cc: Carlos O'Donell
Hi,
I'd like to get commit access to the glibc repository. My account is
torvald@gcc.gnu.org, which I suppose should work for glibc too. Carlos
has authorized the access.
Thanks!
Torvald
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2019-09-25 21:04 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-07-02 18:46 GLIBC commit access Maxim Kuvyrkov
2012-07-02 19:09 ` Roland McGrath
2012-07-09 13:23 ` Ian Lance Taylor
2013-10-09 19:53 glibc " Torvald Riegel
2013-10-09 19:55 ` Frank Ch. Eigler
2019-09-25 5:12 Alistair Francis
2019-09-25 14:07 ` Christopher Faylor
2019-09-25 15:22 ` Carlos O'Donell
2019-09-25 16:24 ` Alistair Francis
2019-09-25 16:43 ` Carlos O'Donell
2019-09-25 17:50 ` Christopher Faylor
2019-09-25 20:08 ` Carlos O'Donell
2019-09-25 20:45 ` Alistair Francis
2019-09-25 21:04 ` Carlos O'Donell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).