* help on installation @ 2001-03-13 7:04 Wayne Dernoncourt 2001-03-13 10:48 ` Ian Roxborough 0 siblings, 1 reply; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-13 7:04 UTC (permalink / raw) To: SourceNav I'm having problems getting SourceNavigator to compile on Solaris. I've browsed through the archives and couldn't find anything appropriate - I'm sure I've missed something. Below is a copy of the slightly edited dialog between the 'puter and me trying to compile/install SourceNavigator. - - - - - - $ SN452/configure Configuring for a sparc-sun-solaris2.6 host. Created "Makefile" in /home1/hermes/wayned using "mh-frag" gcc: ${OPT}: No such file or directory *** The command '/opt/gnu/bin/gcc -o conftest -ansi ${OPT} conftest.c' failed. *** You must set the environment variable CC to a working compiler. 14:26:56 ~ $ set|more ...stuff deleted... CC=/opt/gnu/bin/gcc $ ls -l /opt/gnu/bin/gcc -rwxr-xr-x 2 root 215164 Dec 22 07:32 /opt/gnu/bin/gcc - - - - - - I do find gcc (also g++ is available if that would work better) - see above, however I don't see conft* anywhere (I did try conf* to make sure the syntax was correct, I got lots of config files). What am I missing? Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-13 7:04 help on installation Wayne Dernoncourt @ 2001-03-13 10:48 ` Ian Roxborough 2001-03-13 11:39 ` Wayne Dernoncourt 2001-03-13 13:01 ` Wayne Dernoncourt 0 siblings, 2 replies; 20+ messages in thread From: Ian Roxborough @ 2001-03-13 10:48 UTC (permalink / raw) To: Wayne Dernoncourt; +Cc: SourceNav conftest.c is generated by configure to check the basics of your compiler. Does you compiler work for a quick "Hello World!" program? If you look in config.log you should get more information on why it failed. Ian. Wayne Dernoncourt wrote: > > I'm having problems getting SourceNavigator to compile on Solaris. > I've browsed through the archives and couldn't find anything > appropriate - I'm sure I've missed something. Below is a copy of > the slightly edited dialog between the 'puter and me trying to > compile/install SourceNavigator. > > - - - - - - > $ SN452/configure > Configuring for a sparc-sun-solaris2.6 host. > Created "Makefile" in /home1/hermes/wayned using "mh-frag" > gcc: ${OPT}: No such file or directory > *** The command '/opt/gnu/bin/gcc -o conftest -ansi ${OPT} conftest.c' > failed. > *** You must set the environment variable CC to a working compiler. > 14:26:56 > ~ > $ set|more > ...stuff deleted... > CC=/opt/gnu/bin/gcc > > $ ls -l /opt/gnu/bin/gcc > -rwxr-xr-x 2 root 215164 Dec 22 07:32 /opt/gnu/bin/gcc > > - - - - - - > > I do find gcc (also g++ is available if that would work better) - > see above, however I don't see conft* anywhere (I did try conf* > to make sure the syntax was correct, I got lots of config files). > What am I missing? > > Take care | This clown speaks for himself, his job doesn't > Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-13 10:48 ` Ian Roxborough @ 2001-03-13 11:39 ` Wayne Dernoncourt 2001-03-13 13:01 ` Wayne Dernoncourt 1 sibling, 0 replies; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-13 11:39 UTC (permalink / raw) To: Ian Roxborough; +Cc: SourceNav On Tue, 13 Mar 2001, Ian Roxborough wrote: > conftest.c is generated by configure to check the basics > of your compiler. Does you compiler work for a quick > "Hello World!" program? I think so, then again we just changed compilers where I work (we were using an older version (from a couple of years ago)). I'll do just that and go from there. > If you look in config.log you should get more information > on why it failed. I should have thought to look in a log file - it didn't occur to me. As soon as this Windows machine finishes chunking on the disk drive, I'll start eXceed and see what happens. (I live in a weird universe, corporate email system - not this account, not at work - is MS centered, my shop is Unix/Solaris centered, it's only a little weird, I also have two email accounts at work, my home email is Solaris using Pine!) Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-13 10:48 ` Ian Roxborough 2001-03-13 11:39 ` Wayne Dernoncourt @ 2001-03-13 13:01 ` Wayne Dernoncourt 2001-03-13 19:01 ` Ian Roxborough 1 sibling, 1 reply; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-13 13:01 UTC (permalink / raw) To: Ian Roxborough; +Cc: SourceNav On Tue, 13 Mar 2001, Ian Roxborough wrote: > conftest.c is generated by configure to check the basics > of your compiler. Does you compiler work for a quick > "Hello World!" program? I just dug up a small C program that I had written back in August for a class, it compiled and linked fine. > If you look in config.log you should get more information > on why it failed. I don't see a config.log anywhere in my current directory structure. I used ls -lR * |grep "Mar 13", here are the results: 15:51:58 ~ $ ls -lR *|grep "Mar 1" -rw-rw-r-- 1 wayned 54263 Mar 13 15:50 Makefile -rw-rw-r-- 1 wayned 108 Mar 13 15:49 mh-frag drwxrwxr-x 2 wayned 1536 Mar 13 15:49 X -rwxrwxr-x 1 wayned 70676 Mar 13 15:49 actions -rw-rw-r-- 1 wayned 64692 Mar 13 15:49 actions.o -rw-rw-r-- 1 wayned 1004 Mar 12 14:42 crap.tcl 15:56:54 ~ $ (well the old version of actions was 26k, this is 70k oh well). (actions was my test case, it compiled and ran okay) Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-13 13:01 ` Wayne Dernoncourt @ 2001-03-13 19:01 ` Ian Roxborough 2001-03-14 4:05 ` Wayne Dernoncourt 0 siblings, 1 reply; 20+ messages in thread From: Ian Roxborough @ 2001-03-13 19:01 UTC (permalink / raw) To: Wayne Dernoncourt; +Cc: SourceNav Wayne Dernoncourt wrote: > > On Tue, 13 Mar 2001, Ian Roxborough wrote: > > conftest.c is generated by configure to check the basics > > of your compiler. Does you compiler work for a quick > > "Hello World!" program? > > I just dug up a small C program that I had written back in August for > a class, it compiled and linked fine. Well that's good (assuming that you used the same gcc). > > If you look in config.log you should get more information > > on why it failed. > > I don't see a config.log anywhere in my current directory structure. > I used ls -lR * |grep "Mar 13", here are the results: config.log will be in the same directory that you run configure in. Note that you should not runing configure in the source directory. Create a build directory and run configure from there. I.e $ mkdir build $ cd build $ ../src/configure --prefix=/where/you/want/to/install $ less config.log Ian. ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-13 19:01 ` Ian Roxborough @ 2001-03-14 4:05 ` Wayne Dernoncourt 2001-03-14 7:56 ` Wayne Dernoncourt 0 siblings, 1 reply; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-14 4:05 UTC (permalink / raw) To: Ian Roxborough; +Cc: SourceNav On Tue, 13 Mar 2001, Ian Roxborough wrote: > Wayne Dernoncourt wrote: > > On Tue, 13 Mar 2001, Ian Roxborough wrote: > > > conftest.c is generated by configure to check the basics > > > of your compiler. Does you compiler work for a quick > > > "Hello World!" program? > > I just dug up a small C program that I had written back in August for > > a class, it compiled and linked fine. > Well that's good (assuming that you used the same gcc). It could be the wrong make (wrong version), so far there are at least two versions of make, gmake could also be there somewhere. Not sure how to find out which one is being used - which just returns - no results. > > > If you look in config.log you should get more information > > > on why it failed. > > I don't see a config.log anywhere in my current directory structure. > > I used ls -lR * |grep "Mar 13", here are the results: > config.log will be in the same directory that you run configure in. > Note that you should not runing configure in the source directory. > Create a build directory and run configure from there. I.e > $ mkdir build > $ cd build > $ ../src/configure --prefix=/where/you/want/to/install > $ less config.log I would think the log file would be in the same directory I ran it from. I had unzipped and untarred in my home directory (~) which created ~/SN452, I ran configure from ~ (./SN452/configure). Maybe I'll create a sub-directory and see what happens. But I didn't see a log file in ~. It only took a dozen or so trys with an error message of "needs to be run from a parallel directory" - maybe since I'm a level above, not a peer level it doesn't work.... Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 4:05 ` Wayne Dernoncourt @ 2001-03-14 7:56 ` Wayne Dernoncourt 2001-03-14 9:39 ` Wayne Dernoncourt 2001-03-14 9:51 ` Ian Roxborough 0 siblings, 2 replies; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-14 7:56 UTC (permalink / raw) To: Ian Roxborough; +Cc: SourceNav <lightbulb goes off> Parallel == Peer - I suppose that does make it easier to clean up later on, but I don't know. It gets much farther along before it quits, but it does complain. Error message: - - - - checking whether included gettext is requested... no checking for libintl.h... (cached) yes checking for gettext in libc... (cached) yes checking for msgfmt... (cached) /usr/5bin/msgfmt checking for dcgettext... (cached) yes checking for gmsgfmt... (cached) /usr/5bin/msgfmt checking for xgettext... (cached) /usr/5bin/xgettext found xgettext programs is not GNU xgettext; ignore it checking for catalogs to be installed... de es fr ko nl no pl ru sl sv creating ./config.status creating Makefile creating src/Makefile creating tests/Makefile creating po/Makefile.in creating intl/Makefile creating config.h config.h is unchanged Configuring snavigator... configure: error: can not find sources in ../../SN452/snavigator Configure in /home1/hermes/wayned/trgt/snavigator failed, exiting. 10:23:25 ~/trgt $ - - - - sources? here are some C files, what else is needed? ./snavigator/db/dbcp.c ./snavigator/db/dbdump.c ./snavigator/db/dbimp.c ./snavigator/db/dbutils.c ./snavigator/db/longstr.c ./snavigator/db/srchtbl.c ./snavigator/demo/asm_demo/cfunc.c ./snavigator/demo/c++_demo/editline/complete.c ./snavigator/demo/c++_demo/editline/editline.c ./snavigator/demo/c++_demo/editline/sysos9.c (lots more) a demo directory doesn't sound right... where and what should these files be called? Redo the untar process -- this doesn't look right: x SN452-source/snavigator/doc/html/edk/gnupro/2_comp/The_C_Preprocessor /cppC_Preprocessor_Output.html, 3630 bytes, 8 tape blocks tar: directory checksum error where is this in the tree? I'll go out and get this tar file again. Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 7:56 ` Wayne Dernoncourt @ 2001-03-14 9:39 ` Wayne Dernoncourt 2001-03-14 9:53 ` Ian Roxborough 2001-03-14 11:51 ` D-Man 2001-03-14 9:51 ` Ian Roxborough 1 sibling, 2 replies; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-14 9:39 UTC (permalink / raw) To: Ian Roxborough; +Cc: SourceNav things continue to get weird I've now downloaded three versions (two could be from the same site, I don't remember). I just downloaded and tried to install from ftp://sources.redhat.com/pub/sourcenav/releases/ , prior to that I tried ftp://mirrors.rcn.net/pub/sourceware/ - I didn't keep track of how big the tar.gz files were (ungzipped with gzip -d SN452.tar.gz), but afterwards the SN452.tar file had the following characteristics: 59146240 Sep 11 2000 SN452.tar (I had renamed the first one to SN452-old.tar, both match on size and date - is there a way to for this Unix newbie to get more info?) After I tried to un-tar it, it failed in the same spot all three times. The resulting disk usage is 38270, it looks like I'm missing around a third of the files (assuming a 1=1 relationship, doubtful it's exact, but it is probably okay for a measure on how much is missing). For grins and giggles, here is the info on the tar that I suppose I'm using: 52620 Jul 16 1997 /usr/sbin/tar (this is on a Sparc Solaris 2.6 system) Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 9:39 ` Wayne Dernoncourt @ 2001-03-14 9:53 ` Ian Roxborough 2001-03-14 11:51 ` D-Man 1 sibling, 0 replies; 20+ messages in thread From: Ian Roxborough @ 2001-03-14 9:53 UTC (permalink / raw) To: Wayne Dernoncourt; +Cc: SourceNav Wayne Dernoncourt wrote: > After I tried to un-tar it, it failed in the same spot all three > times. The resulting disk usage is 38270, 38Kb? not much space.... ;-) > it looks like I'm > missing around a third of the files (assuming a 1=1 relationship, > doubtful it's exact, but it is probably okay for a measure on how > much is missing). > > For grins and giggles, here is the info on the tar that I suppose > I'm using: > 52620 Jul 16 1997 /usr/sbin/tar > (this is on a Sparc Solaris 2.6 system) You need to run gnu tar, I don't believe Solaris tar works with the sn tarball. Ian. ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 9:39 ` Wayne Dernoncourt 2001-03-14 9:53 ` Ian Roxborough @ 2001-03-14 11:51 ` D-Man 2001-03-14 13:35 ` Wayne Dernoncourt 1 sibling, 1 reply; 20+ messages in thread From: D-Man @ 2001-03-14 11:51 UTC (permalink / raw) To: SourceNav On Wed, Mar 14, 2001 at 12:39:18PM -0500, Wayne Dernoncourt wrote: | is there a way to for this Unix newbie to get more info? Have you tried the Solaris binaries? Sometimes it easier to just get a prebuilt version for your system than to try building it for yourself. -D ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 11:51 ` D-Man @ 2001-03-14 13:35 ` Wayne Dernoncourt 2001-03-14 13:54 ` Ben Elliston ` (2 more replies) 0 siblings, 3 replies; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-14 13:35 UTC (permalink / raw) To: D-Man; +Cc: SourceNav On Wed, 14 Mar 2001, D-Man wrote: > On Wed, Mar 14, 2001 at 12:39:18PM -0500, Wayne Dernoncourt wrote: > | is there a way to for this Unix newbie to get more info? > Have you tried the Solaris binaries? Sometimes it easier to > just get a prebuilt version for your system than to try > building it for yourself. Actually I did try that. After fixing a couple of complaints ("couldn't find a usable init.tcl in long list of directories" and giving up, etc. comments along the lines of what next. When I ran sn(?, it's been a little while), I got back errors about couldn't find this, couldn't find that, etc. - looked at the script file, realized it was calling hyper to do the job and I called hyper directly and then I got the "couldn't find usable init.tcl" etc. errors. I know that sn(?) was setting those for me, but I was in frustration mode at the time. I don't know how long this was going to go on, in frustration, I went back and got gnu tar and then gnu make and compiled those. Those now seem to work. Here are the latest set of errors: <stuff deleted> Making all in ppc601-eabi make[5]: Entering directory `/home1/hermes/wayned/trgt/snavigator/parsers/assembly/ppc601-eabi' lex ../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrowser.l && mv lex.yy.c abrowser.c "../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrowser.l":line 138: Error: illegal extra "}" make[5]: *** [abrowser.c] Error 1 make[5]: Leaving directory `/home1/hermes/wayned/trgt/snavigator/parsers/assembly/ppc601-eabi' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/home1/hermes/wayned/trgt/snavigator/parsers/assembly' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/home1/hermes/wayned/trgt/snavigator/parsers' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home1/hermes/wayned/trgt/snavigator' make[1]: *** [all-recursive-am] Error 2 make[1]: Leaving directory `/home1/hermes/wayned/trgt/snavigator' make: *** [all-snavigator] Error 2 trgt (or target) is where this stuff is going. I'm not sure what "Error 1" refers to or where to go from here. Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 13:35 ` Wayne Dernoncourt @ 2001-03-14 13:54 ` Ben Elliston 2001-03-14 14:46 ` Wayne Dernoncourt 2001-03-14 14:14 ` Ian Roxborough 2001-03-15 0:40 ` Khamis Abuelkomboz (UUNET) 2 siblings, 1 reply; 20+ messages in thread From: Ben Elliston @ 2001-03-14 13:54 UTC (permalink / raw) To: Wayne Dernoncourt; +Cc: D-Man, SourceNav >>>>> "Wayne" == Wayne Dernoncourt <wayned@cpcug.org> writes: Wayne> <stuff deleted> Wayne> Making all in ppc601-eabi Wayne> make[5]: Entering directory Wayne> `/home1/hermes/wayned/trgt/snavigator/parsers/assembly/ppc601-eabi' Wayne> lex Wayne> ../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrowser.l Wayne> && mv lex.yy.c abrowser.c Wayne> "../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrowser.l":line Wayne> 138: Error: illegal extra "}" It's possible that this file has been somehow modified -- abrowser.l doesn't use much out of the ordinary from the lex language. On the other hand, your lex could be broken. Do you have flex? Ben ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 13:54 ` Ben Elliston @ 2001-03-14 14:46 ` Wayne Dernoncourt 0 siblings, 0 replies; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-14 14:46 UTC (permalink / raw) To: Ben Elliston; +Cc: D-Man, SourceNav On Thu, 15 Mar 2001, Ben Elliston wrote: > >>>>> "Wayne" == Wayne Dernoncourt <wayned@cpcug.org> writes: > Wayne> lex > Wayne> ../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrowser.l > Wayne> && mv lex.yy.c abrowser.c > Wayne> "../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrowser.l":line > Wayne> 138: Error: illegal extra "}" > It's possible that this file has been somehow modified -- abrowser.l > doesn't use much out of the ordinary from the lex language. > On the other hand, your lex could be broken. Do you have flex? Lex? Sun Lex? Broken, surely you jest<g>. Hmmmm, that's dandy question, is flex available? flex doesn't seem to be here, lex is though, here is the directory entry for it: 73124 Jul 16 1997 /usr/ccs/bin/lex and a little more info: Software Generation Utilities (SGU) Solaris/ELF (3.0) I'm clueless on who or what ccs is about (C Compiler System, Corporate Computer Site, Complete Chaos Switch?) Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 13:35 ` Wayne Dernoncourt 2001-03-14 13:54 ` Ben Elliston @ 2001-03-14 14:14 ` Ian Roxborough 2001-03-14 14:36 ` Wayne Dernoncourt 2001-03-15 0:40 ` Khamis Abuelkomboz (UUNET) 2 siblings, 1 reply; 20+ messages in thread From: Ian Roxborough @ 2001-03-14 14:14 UTC (permalink / raw) To: Wayne Dernoncourt; +Cc: SourceNav Wayne Dernoncourt wrote: > > On Wed, 14 Mar 2001, D-Man wrote: > > > On Wed, Mar 14, 2001 at 12:39:18PM -0500, Wayne Dernoncourt wrote: > > | is there a way to for this Unix newbie to get more info? > > > Have you tried the Solaris binaries? Sometimes it easier to > > just get a prebuilt version for your system than to try > > building it for yourself. > > Actually I did try that. After fixing a couple of complaints > ("couldn't find a usable init.tcl in long list of directories" and > giving up, etc. comments along the lines of what next. When I ran > sn(?, it's been a little while), I got back errors about couldn't > find this, couldn't find that, etc. - looked at the script file, > realized it was calling hyper to do the job and I called hyper > directly and then I got the "couldn't find usable init.tcl" etc. > errors. I know that sn(?) was setting those for me, but I was > in frustration mode at the time. You did run the installer that come with the binary? Ian. ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 14:14 ` Ian Roxborough @ 2001-03-14 14:36 ` Wayne Dernoncourt 2001-03-14 14:48 ` Ian Roxborough 0 siblings, 1 reply; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-14 14:36 UTC (permalink / raw) To: Ian Roxborough; +Cc: SourceNav On Wed, 14 Mar 2001, Ian Roxborough wrote: > Wayne Dernoncourt wrote: > > > Have you tried the Solaris binaries? Sometimes it easier to > > > just get a prebuilt version for your system than to try > > > building it for yourself. > > Actually I did try that. After fixing a couple of complaints > > ("couldn't find a usable init.tcl in long list of directories" and > > giving up, etc. comments along the lines of what next. When I ran <snip> > You did run the installer that come with the binary? I think so. But since you bring that up and I'm not sure, I'll do it over again. Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 14:36 ` Wayne Dernoncourt @ 2001-03-14 14:48 ` Ian Roxborough 2001-03-14 15:57 ` Wayne Dernoncourt 0 siblings, 1 reply; 20+ messages in thread From: Ian Roxborough @ 2001-03-14 14:48 UTC (permalink / raw) To: Wayne Dernoncourt; +Cc: SourceNav Wayne Dernoncourt wrote: > > On Wed, 14 Mar 2001, Ian Roxborough wrote: > > > Wayne Dernoncourt wrote: > > > > > Have you tried the Solaris binaries? Sometimes it easier to > > > > just get a prebuilt version for your system than to try > > > > building it for yourself. > > > > Actually I did try that. After fixing a couple of complaints > > > ("couldn't find a usable init.tcl in long list of directories" and > > > giving up, etc. comments along the lines of what next. When I ran > <snip> > > > You did run the installer that come with the binary? > > I think so. But since you bring that up and I'm not sure, I'll do > it over again. It's called "INSTALL", you run it helps get everything in the right place. It's graphical and it will ask you questions, kind of hard to miss it. Ian. ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 14:48 ` Ian Roxborough @ 2001-03-14 15:57 ` Wayne Dernoncourt 0 siblings, 0 replies; 20+ messages in thread From: Wayne Dernoncourt @ 2001-03-14 15:57 UTC (permalink / raw) To: Ian Roxborough; +Cc: SourceNav On Wed, 14 Mar 2001, Ian Roxborough wrote: > It's called "INSTALL", you run it helps get everything in the right > place. It's graphical and it will ask you questions, kind of hard to > miss it. I didn't run the INSTALL routine, it would be hard not to remember that. I'm going to do some playing in the AM. Take care | This clown speaks for himself, his job doesn't Wayne D. | pay for this, etc. (directly anyway) ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 13:35 ` Wayne Dernoncourt 2001-03-14 13:54 ` Ben Elliston 2001-03-14 14:14 ` Ian Roxborough @ 2001-03-15 0:40 ` Khamis Abuelkomboz (UUNET) 2001-03-15 11:21 ` Syd Polk 2 siblings, 1 reply; 20+ messages in thread From: Khamis Abuelkomboz (UUNET) @ 2001-03-15 0:40 UTC (permalink / raw) To: Wayne Dernoncourt; +Cc: SourceNav Wayne Dernoncourt wrote: > On Wed, 14 Mar 2001, D-Man wrote: > > >> On Wed, Mar 14, 2001 at 12:39:18PM -0500, Wayne Dernoncourt wrote: >> | is there a way to for this Unix newbie to get more info? > > >> Have you tried the Solaris binaries? Sometimes it easier to >> just get a prebuilt version for your system than to try >> building it for yourself. > > > Actually I did try that. After fixing a couple of complaints > ("couldn't find a usable init.tcl in long list of directories" and > giving up, etc. comments along the lines of what next. When I ran > sn(?, it's been a little while), I got back errors about couldn't > find this, couldn't find that, etc. - looked at the script file, > realized it was calling hyper to do the job and I called hyper > directly and then I got the "couldn't find usable init.tcl" etc. > errors. I know that sn(?) was setting those for me, but I was > in frustration mode at the time. > > I don't know how long this was going to go on, in frustration, I > went back and got gnu tar and then gnu make and compiled those. > Those now seem to work. Here are the latest set of errors: > > <stuff deleted> > Making all in ppc601-eabi > make[5]: Entering directory > `/home1/hermes/wayned/trgt/snavigator/parsers/assembly/ppc601-eabi' > lex > .../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrowser.l > && mv lex.yy.c abrowser.c > "../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrowser.l":line > 138: Error: illegal extra "}" > make[5]: *** [abrowser.c] Error 1 > make[5]: Leaving directory > `/home1/hermes/wayned/trgt/snavigator/parsers/assembly/ppc601-eabi' > make[4]: *** [all-recursive] Error 1 > make[4]: Leaving directory > `/home1/hermes/wayned/trgt/snavigator/parsers/assembly' > make[3]: *** [all-recursive] Error 1 > make[3]: Leaving directory `/home1/hermes/wayned/trgt/snavigator/parsers' > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory `/home1/hermes/wayned/trgt/snavigator' > make[1]: *** [all-recursive-am] Error 2 > make[1]: Leaving directory `/home1/hermes/wayned/trgt/snavigator' > make: *** [all-snavigator] Error 2 > > trgt (or target) is where this stuff is going. I'm not sure what > "Error 1" refers to or where to go from here. > > Take care | This clown speaks for himself, his job doesn't > Wayne D. | pay for this, etc. (directly anyway) I can understand your frostration, actually every time I want to build SN (regardless on witch OS), I run into this error, my solution is to just delete abrowser from the Makefiles and continue compilation. I get always alot of problems with the SDK stuff, to be able to build the whole thing, just delete also those. The best way to delete those kind of things from the makefiles: - go to the upper directory of abrowser - edit Makefile - delete every thing what is called "abrowser" Do the same for every directory you want to get rid of. khamis ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-15 0:40 ` Khamis Abuelkomboz (UUNET) @ 2001-03-15 11:21 ` Syd Polk 0 siblings, 0 replies; 20+ messages in thread From: Syd Polk @ 2001-03-15 11:21 UTC (permalink / raw) To: Wayne Dernoncourt; +Cc: SourceNav Of get "flex" from fsf.org and build your own copy and put it in your path. At 09:38 AM 3/15/01 +0100, Khamis Abuelkomboz (UUNET) wrote: >Wayne Dernoncourt wrote: > >>On Wed, 14 Mar 2001, D-Man wrote: >> >>>On Wed, Mar 14, 2001 at 12:39:18PM -0500, Wayne Dernoncourt wrote: >>>| is there a way to for this Unix newbie to get more info? >> >>>Have you tried the Solaris binaries? Sometimes it easier to >>>just get a prebuilt version for your system than to try >>>building it for yourself. >> >>Actually I did try that. After fixing a couple of complaints >>("couldn't find a usable init.tcl in long list of directories" and >>giving up, etc. comments along the lines of what next. When I ran >>sn(?, it's been a little while), I got back errors about couldn't >>find this, couldn't find that, etc. - looked at the script file, >>realized it was calling hyper to do the job and I called hyper >>directly and then I got the "couldn't find usable init.tcl" etc. >>errors. I know that sn(?) was setting those for me, but I was >>in frustration mode at the time. >>I don't know how long this was going to go on, in frustration, I >>went back and got gnu tar and then gnu make and compiled those. >>Those now seem to work. Here are the latest set of errors: >><stuff deleted> >>Making all in ppc601-eabi >>make[5]: Entering directory >>`/home1/hermes/wayned/trgt/snavigator/parsers/assembly/ppc601-eabi' >>lex >>.../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrow >>ser.l >>&& mv lex.yy.c abrowser.c >>"../../../../../SN452-source/snavigator/parsers/assembly/ppc601-eabi/abrow >>ser.l":line >>138: Error: illegal extra "}" >>make[5]: *** [abrowser.c] Error 1 >>make[5]: Leaving directory >>`/home1/hermes/wayned/trgt/snavigator/parsers/assembly/ppc601-eabi' >>make[4]: *** [all-recursive] Error 1 >>make[4]: Leaving directory >>`/home1/hermes/wayned/trgt/snavigator/parsers/assembly' >>make[3]: *** [all-recursive] Error 1 >>make[3]: Leaving directory `/home1/hermes/wayned/trgt/snavigator/parsers' >>make[2]: *** [all-recursive] Error 1 >>make[2]: Leaving directory `/home1/hermes/wayned/trgt/snavigator' >>make[1]: *** [all-recursive-am] Error 2 >>make[1]: Leaving directory `/home1/hermes/wayned/trgt/snavigator' >>make: *** [all-snavigator] Error 2 >>trgt (or target) is where this stuff is going. I'm not sure what >>"Error 1" refers to or where to go from here. >>Take care | This clown speaks for himself, his job doesn't >>Wayne D. | pay for this, etc. (directly anyway) > >I can understand your frostration, actually every time I want to >build SN (regardless on witch OS), I run into this error, my >solution is to just delete abrowser from the Makefiles and continue >compilation. >I get always alot of problems with the SDK stuff, to be able to >build the whole thing, just delete also those. >The best way to delete those kind of things from the makefiles: >- go to the upper directory of abrowser >- edit Makefile >- delete every thing what is called "abrowser" > >Do the same for every directory you want to get rid of. > >khamis Syd Polk spolk@redhat.com Engineering Manager +1 408 543 9430 Red Hat, Inc. ^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: help on installation 2001-03-14 7:56 ` Wayne Dernoncourt 2001-03-14 9:39 ` Wayne Dernoncourt @ 2001-03-14 9:51 ` Ian Roxborough 1 sibling, 0 replies; 20+ messages in thread From: Ian Roxborough @ 2001-03-14 9:51 UTC (permalink / raw) To: Wayne Dernoncourt; +Cc: SourceNav Using gnu make is important. Wayne Dernoncourt wrote: > > <lightbulb goes off> > Parallel == Peer - I suppose that does make it easier to clean up later > on, but I don't know. It makes it easier to do many things, cross compilation is the main one. > checking whether included gettext is requested... no > checking for libintl.h... (cached) yes > checking for gettext in libc... (cached) yes > checking for msgfmt... (cached) /usr/5bin/msgfmt > checking for dcgettext... (cached) yes > checking for gmsgfmt... (cached) /usr/5bin/msgfmt > checking for xgettext... (cached) /usr/5bin/xgettext Deleting your config.cache before you running configure can help when you are trying to first configure SN. > Configuring snavigator... > configure: error: can not find sources in ../../SN452/snavigator > Configure in /home1/hermes/wayned/trgt/snavigator failed, exiting. from your build directory try: $ sh ../src/configure --prefix=/where/to/install If this doesn't work, you need to provide more information, like, how you are running configure (the command line) and any other steps you are doing. That fact you couldn't find config.log is very strange, I'm not sure how to run configure without generating one. Ian. ^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2001-03-15 11:21 UTC | newest] Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-03-13 7:04 help on installation Wayne Dernoncourt 2001-03-13 10:48 ` Ian Roxborough 2001-03-13 11:39 ` Wayne Dernoncourt 2001-03-13 13:01 ` Wayne Dernoncourt 2001-03-13 19:01 ` Ian Roxborough 2001-03-14 4:05 ` Wayne Dernoncourt 2001-03-14 7:56 ` Wayne Dernoncourt 2001-03-14 9:39 ` Wayne Dernoncourt 2001-03-14 9:53 ` Ian Roxborough 2001-03-14 11:51 ` D-Man 2001-03-14 13:35 ` Wayne Dernoncourt 2001-03-14 13:54 ` Ben Elliston 2001-03-14 14:46 ` Wayne Dernoncourt 2001-03-14 14:14 ` Ian Roxborough 2001-03-14 14:36 ` Wayne Dernoncourt 2001-03-14 14:48 ` Ian Roxborough 2001-03-14 15:57 ` Wayne Dernoncourt 2001-03-15 0:40 ` Khamis Abuelkomboz (UUNET) 2001-03-15 11:21 ` Syd Polk 2001-03-14 9:51 ` Ian Roxborough
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).