* Re: 2.16.93 prerelease available
@ 2006-05-22 3:37 John David Anglin
2006-05-22 8:30 ` Daniel Jacobowitz
0 siblings, 1 reply; 9+ messages in thread
From: John David Anglin @ 2006-05-22 3:37 UTC (permalink / raw)
To: binutils
I've tested the prerelease on hppa-unknown-linux-gnu, hppa2.0w-hp-hpux11.11
and hppa64-hp-hpux11.11. There are no testsuite failures on linux. Under
hpux, there no new issues (just the problems noted in PRs 273, 1491 and
2470).
Dave
--
J. David Anglin dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada (613) 990-0752 (FAX: 952-6602)
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.16.93 prerelease available
2006-05-22 3:37 2.16.93 prerelease available John David Anglin
@ 2006-05-22 8:30 ` Daniel Jacobowitz
0 siblings, 0 replies; 9+ messages in thread
From: Daniel Jacobowitz @ 2006-05-22 8:30 UTC (permalink / raw)
To: binutils
On Sat, May 20, 2006 at 10:45:29AM -0400, John David Anglin wrote:
> I've tested the prerelease on hppa-unknown-linux-gnu, hppa2.0w-hp-hpux11.11
> and hppa64-hp-hpux11.11. There are no testsuite failures on linux. Under
> hpux, there no new issues (just the problems noted in PRs 273, 1491 and
> 2470).
Thanks!
--
Daniel Jacobowitz
CodeSourcery
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.16.93 prerelease available
2006-05-17 22:04 Daniel Jacobowitz
2006-05-18 8:47 ` Martin Michlmayr
@ 2006-05-18 21:51 ` Alan Modra
1 sibling, 0 replies; 9+ messages in thread
From: Alan Modra @ 2006-05-18 21:51 UTC (permalink / raw)
To: binutils
Fixes build breakage. Applied to 2.17 branch.
* avr-dis.c (avr_operand): Warning fix.
Index: opcodes/avr-dis.c
===================================================================
RCS file: /cvs/src/src/opcodes/avr-dis.c,v
retrieving revision 1.16
diff -u -p -r1.16 avr-dis.c
--- opcodes/avr-dis.c 12 Apr 2006 13:09:10 -0000 1.16
+++ opcodes/avr-dis.c 17 May 2006 23:49:05 -0000
@@ -1,5 +1,6 @@
/* Disassemble AVR instructions.
- Copyright 1999, 2000, 2002, 2004, 2005 Free Software Foundation, Inc.
+ Copyright 1999, 2000, 2002, 2004, 2005, 2006
+ Free Software Foundation, Inc.
Contributed by Denis Chertykov <denisc@overta.ru>
@@ -142,7 +143,7 @@ avr_operand (unsigned int insn, unsigned
/* See PR binutils/2545. Ideally we would like to display the hex
value of the address only once, but this would mean recoding
objdump_print_address() which would affect many targets. */
- sprintf (buf, "%#lx", * sym_addr);
+ sprintf (buf, "%#lx", (unsigned long) *sym_addr);
sprintf (comment, "0x");
break;
--
Alan Modra
IBM OzLabs - Linux Technology Centre
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.16.93 prerelease available
2006-05-18 19:33 ` Daniel Jacobowitz
@ 2006-05-18 21:31 ` Martin Michlmayr
0 siblings, 0 replies; 9+ messages in thread
From: Martin Michlmayr @ 2006-05-18 21:31 UTC (permalink / raw)
To: binutils
* Daniel Jacobowitz <drow@false.org> [2006-05-17 19:15]:
> > * Daniel Jacobowitz <drow@false.org> [2006-05-17 18:59]:
> > > Try mkdir objdir; cd objdir; ../configure. Does that reproduce it?
> > Yeah, I tried that too - it works.
> i.e. the build succeeds? Then I'm stumped.
Yes, it succeeds. I might do some more tests tomorrow but please
don't hold off the release if you don't hear from me.
--
Martin Michlmayr
http://www.cyrius.com/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.16.93 prerelease available
2006-05-18 14:46 ` Martin Michlmayr
@ 2006-05-18 19:33 ` Daniel Jacobowitz
2006-05-18 21:31 ` Martin Michlmayr
0 siblings, 1 reply; 9+ messages in thread
From: Daniel Jacobowitz @ 2006-05-18 19:33 UTC (permalink / raw)
To: binutils
On Thu, May 18, 2006 at 01:10:12AM +0200, Martin Michlmayr wrote:
> * Daniel Jacobowitz <drow@false.org> [2006-05-17 18:59]:
> > Try mkdir objdir; cd objdir; ../configure. Does that reproduce it?
>
> Yeah, I tried that too - it works.
i.e. the build succeeds? Then I'm stumped.
--
Daniel Jacobowitz
CodeSourcery
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.16.93 prerelease available
2006-05-18 8:47 ` Daniel Jacobowitz
@ 2006-05-18 14:46 ` Martin Michlmayr
2006-05-18 19:33 ` Daniel Jacobowitz
0 siblings, 1 reply; 9+ messages in thread
From: Martin Michlmayr @ 2006-05-18 14:46 UTC (permalink / raw)
To: binutils
* Daniel Jacobowitz <drow@false.org> [2006-05-17 18:59]:
> Try mkdir objdir; cd objdir; ../configure. Does that reproduce it?
Yeah, I tried that too - it works.
> If so, does libiberty/pic exist, and what's in
Yes.
> libiberty/Makefile:PICFLAG?
PICFLAG =
and later:
# Warning: this fragment is automatically generated
# Following fragment copied from ../../libiberty/../config/mh-sparcpic
PICFLAG=`case '${LIBCFLAGS} ${LIBCXXFLAGS}' in *-fpic* ) echo -fpic ;; * ) echo -fPIC ;; esac`
--
Martin Michlmayr
http://www.cyrius.com/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.16.93 prerelease available
2006-05-17 22:04 Daniel Jacobowitz
@ 2006-05-18 8:47 ` Martin Michlmayr
2006-05-18 8:47 ` Daniel Jacobowitz
2006-05-18 21:51 ` Alan Modra
1 sibling, 1 reply; 9+ messages in thread
From: Martin Michlmayr @ 2006-05-18 8:47 UTC (permalink / raw)
To: binutils
* Daniel Jacobowitz <drow@false.org> [2006-05-17 15:28]:
> I will give a little while to see if further problems crop up (or
> e.g. more detail on the SPARC libiberty build trouble).
I still see this but you can probably ignore it. Basically, when I take a
tar file and run ./configure ; make it works. However, when I take the tar
file, the debian/ directory from the current Debian package and run
dpkg-buildpackage then it works fine on i386 and powerpc but gives this
libiberty error on sparc. Unfortunately, I cannot see anything obviously
wrong in debian/rules...
--
Martin Michlmayr
http://www.cyrius.com/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.16.93 prerelease available
2006-05-18 8:47 ` Martin Michlmayr
@ 2006-05-18 8:47 ` Daniel Jacobowitz
2006-05-18 14:46 ` Martin Michlmayr
0 siblings, 1 reply; 9+ messages in thread
From: Daniel Jacobowitz @ 2006-05-18 8:47 UTC (permalink / raw)
To: Martin Michlmayr; +Cc: binutils
On Thu, May 18, 2006 at 12:24:44AM +0200, Martin Michlmayr wrote:
> * Daniel Jacobowitz <drow@false.org> [2006-05-17 15:28]:
> > I will give a little while to see if further problems crop up (or
> > e.g. more detail on the SPARC libiberty build trouble).
>
> I still see this but you can probably ignore it. Basically, when I take a
> tar file and run ./configure ; make it works. However, when I take the tar
> file, the debian/ directory from the current Debian package and run
> dpkg-buildpackage then it works fine on i386 and powerpc but gives this
> libiberty error on sparc. Unfortunately, I cannot see anything obviously
> wrong in debian/rules...
Try mkdir objdir; cd objdir; ../configure. Does that reproduce it?
If so, does libiberty/pic exist, and what's in
libiberty/Makefile:PICFLAG?
--
Daniel Jacobowitz
CodeSourcery
^ permalink raw reply [flat|nested] 9+ messages in thread
* 2.16.93 prerelease available
@ 2006-05-17 22:04 Daniel Jacobowitz
2006-05-18 8:47 ` Martin Michlmayr
2006-05-18 21:51 ` Alan Modra
0 siblings, 2 replies; 9+ messages in thread
From: Daniel Jacobowitz @ 2006-05-17 22:04 UTC (permalink / raw)
To: binutils
I have uploaded binutils-2.16.93.tar.bz2. I think we're fairly
close to the 2.17 release at this point; I will give a little while
to see if further problems crop up (or e.g. more detail on the SPARC
libiberty build trouble).
--
Daniel Jacobowitz
CodeSourcery
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2006-05-20 14:52 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-05-22 3:37 2.16.93 prerelease available John David Anglin
2006-05-22 8:30 ` Daniel Jacobowitz
-- strict thread matches above, loose matches on Subject: below --
2006-05-17 22:04 Daniel Jacobowitz
2006-05-18 8:47 ` Martin Michlmayr
2006-05-18 8:47 ` Daniel Jacobowitz
2006-05-18 14:46 ` Martin Michlmayr
2006-05-18 19:33 ` Daniel Jacobowitz
2006-05-18 21:31 ` Martin Michlmayr
2006-05-18 21:51 ` Alan Modra
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).