* cross-ng building trys to copy files to '/' ?
@ 2014-01-08 14:33 narkewoody
2014-01-08 19:01 ` thorsten.johannvorderbrueggen
0 siblings, 1 reply; 6+ messages in thread
From: narkewoody @ 2014-01-08 14:33 UTC (permalink / raw)
To: crossgcc
Hi,
I am building ARM toolchain using cross-ng on my Slackware Linux PC.
I've tried 1.17 and 1.18 - the two most recent release, but met the same
error in building (ct-ng build). It seems, cross-ng was trying to
install some header files into my /usr/include and then failed because
it was not running as root.
Can anyone help me? Below is the output:
...
[ALL ] mv -f /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.makeT /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.make
[ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
[ALL ] make[2]: Entering directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
[ALL ] /home/woody/work/cross-ng.build/1.17.0/.build/tools/bin/install -c -m 644 include/limits.h /usr/include/limits.h
[ALL ] /usr/bin/ginstall: cannot remove '/usr/include/limits.h': Permission denied
[ERROR] make[2]: *** [/usr/include/limits.h] Error 1
[ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
[ERROR] make[1]: *** [install-headers] Error 2
[ALL ] make[1]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles'
[ERROR]
[ERROR] >>
[ERROR] >> Build failed in step 'Installing C library headers & start files'
[ERROR] >> called in step '(top-level)'
[ERROR] >>
[ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@258]
[ERROR] >> called from: do_libc_backend_once[scripts/build/libc/glibc-eglibc.sh-common@384]
...
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: cross-ng building trys to copy files to '/' ?
2014-01-08 14:33 cross-ng building trys to copy files to '/' ? narkewoody
@ 2014-01-08 19:01 ` thorsten.johannvorderbrueggen
[not found] ` <CAAsE_uepmdsn1YOux0U9W9D1PKJ6KpVmV4=mSh=+jjmBLY4BJA@mail.gmail.com>
0 siblings, 1 reply; 6+ messages in thread
From: thorsten.johannvorderbrueggen @ 2014-01-08 19:01 UTC (permalink / raw)
To: crossgcc
On Wed, 8 Jan 2014 22:32:38 +0800
narkewoody@gmail.com wrote:
> Hi,
>
> I am building ARM toolchain using cross-ng on my Slackware Linux PC.
> I've tried 1.17 and 1.18 - the two most recent release, but met the same
> error in building (ct-ng build). It seems, cross-ng was trying to
> install some header files into my /usr/include and then failed because
> it was not running as root.
>
> Can anyone help me? Below is the output:
>
> ...
>
> [ALL ] mv -f /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.makeT /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.make
> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
> [ALL ] make[2]: Entering directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
> [ALL ] /home/woody/work/cross-ng.build/1.17.0/.build/tools/bin/install -c -m 644 include/limits.h /usr/include/limits.h
> [ALL ] /usr/bin/ginstall: cannot remove '/usr/include/limits.h': Permission denied
> [ERROR] make[2]: *** [/usr/include/limits.h] Error 1
> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
> [ERROR] make[1]: *** [install-headers] Error 2
> [ALL ] make[1]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles'
> [ERROR]
> [ERROR] >>
> [ERROR] >> Build failed in step 'Installing C library headers & start files'
> [ERROR] >> called in step '(top-level)'
> [ERROR] >>
> [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@258]
> [ERROR] >> called from: do_libc_backend_once[scripts/build/libc/glibc-eglibc.sh-common@384]
>
> ...
>
> --
> For unsubscribe information see http://sourceware.org/lists.html#faq
>
Hi woody,
i used 1.18 and actual 1.19 for building my arm toolchain ... on slackware ... of course :-) ... i had no problems ... can you post your config ...
Cheers
Thorsten
--
thorsten.johannvorderbrueggen@t-online.de <thorsten.johannvorderbrueggen@t-online.de>
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: cross-ng building trys to copy files to '/' ?
[not found] ` <CAAsE_uepmdsn1YOux0U9W9D1PKJ6KpVmV4=mSh=+jjmBLY4BJA@mail.gmail.com>
@ 2014-01-09 18:24 ` thorsten.johannvorderbrueggen
2014-01-10 2:42 ` Woody Wu
2014-01-10 8:32 ` Bob Dunlop
0 siblings, 2 replies; 6+ messages in thread
From: thorsten.johannvorderbrueggen @ 2014-01-09 18:24 UTC (permalink / raw)
To: crossgcc
On Thu, 9 Jan 2014 13:48:02 +0800
Woody Wu <narkewoody@gmail.com> wrote:
> On 9 January 2014 03:01, thorsten.johannvorderbrueggen@t-online.de
> <thorsten.johannvorderbrueggen@t-online.de> wrote:
> > On Wed, 8 Jan 2014 22:32:38 +0800
> > narkewoody@gmail.com wrote:
> >
> >> Hi,
> >>
> >> I am building ARM toolchain using cross-ng on my Slackware Linux PC.
> >> I've tried 1.17 and 1.18 - the two most recent release, but met the same
> >> error in building (ct-ng build). It seems, cross-ng was trying to
> >> install some header files into my /usr/include and then failed because
> >> it was not running as root.
> >>
> >> Can anyone help me? Below is the output:
> >>
> >> ...
> >>
> >> [ALL ] mv -f /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.makeT /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.make
> >> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
> >> [ALL ] make[2]: Entering directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
> >> [ALL ] /home/woody/work/cross-ng.build/1.17.0/.build/tools/bin/install -c -m 644 include/limits.h /usr/include/limits.h
> >> [ALL ] /usr/bin/ginstall: cannot remove '/usr/include/limits.h': Permission denied
> >> [ERROR] make[2]: *** [/usr/include/limits.h] Error 1
> >> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
> >> [ERROR] make[1]: *** [install-headers] Error 2
> >> [ALL ] make[1]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles'
> >> [ERROR]
> >> [ERROR] >>
> >> [ERROR] >> Build failed in step 'Installing C library headers & start files'
> >> [ERROR] >> called in step '(top-level)'
> >> [ERROR] >>
> >> [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@258]
> >> [ERROR] >> called from: do_libc_backend_once[scripts/build/libc/glibc-eglibc.sh-common@384]
> >>
> >> ...
> >>
> >> --
> >> For unsubscribe information see http://sourceware.org/lists.html#faq
> >>
> >
> >
> > Hi woody,
> >
> > i used 1.18 and actual 1.19 for building my arm toolchain ... on slackware ... of course :-) ... i had no problems ... can you post your config ...
> >
> > Cheers
> > Thorsten
> >
>
> Nice to meet you Thorsten. My Slackware is 14.0. Now I paste the
> '.config' file from my work directory, please have a look at it. If
> you still need other information, please let me know.
>
> #
> # C-library
> #
> CT_LIBC="glibc"
> CT_LIBC_VERSION="2.9"
> # CT_LIBC_eglibc is not set
> # CT_LIBC_uClibc is not set
> CT_LIBC_glibc=y
> CT_LIBC_none_AVAILABLE=y
> CT_LIBC_mingw_AVAILABLE=y
> CT_LIBC_eglibc_AVAILABLE=y
> CT_LIBC_newlib_AVAILABLE=y
> CT_LIBC_uClibc_AVAILABLE=y
> CT_LIBC_glibc_AVAILABLE=y
> # CT_LIBC_GLIBC_V_2_14_1 is not set
> # CT_LIBC_GLIBC_V_2_14 is not set
> # CT_LIBC_GLIBC_V_2_13 is not set
> # CT_LIBC_GLIBC_V_2_12_2 is not set
> # CT_LIBC_GLIBC_V_2_12_1 is not set
> # CT_LIBC_GLIBC_V_2_11_1 is not set
> # CT_LIBC_GLIBC_V_2_11 is not set
> # CT_LIBC_GLIBC_V_2_10_1 is not set
> CT_LIBC_GLIBC_V_2_9=y
> # CT_LIBC_GLIBC_V_2_8 is not set
> CT_LIBC_SUPPORT_THREADS_ANY=y
> CT_LIBC_SUPPORT_NPTL=y
> CT_THREADS="nptl"
>
> #
> # Common C library options
> #
> CT_THREADS_NPTL=y
> CT_LIBC_XLDD=y
> CT_LIBC_GLIBC_MAY_FORCE_PORTS=y
> CT_LIBC_glibc_familly=y
> CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY=""
> CT_LIBC_GLIBC_CONFIGPARMS=""
> CT_LIBC_GLIBC_EXTRA_CFLAGS=""
> CT_LIBC_EXTRA_CC_ARGS=""
> # CT_LIBC_DISABLE_VERSIONING is not set
> CT_LIBC_OLDEST_ABI=""
> # CT_LIBC_GLIBC_FORCE_UNWIND is not set
> CT_LIBC_GLIBC_USE_PORTS=y
> CT_LIBC_ADDONS_LIST=""
> # CT_LIBC_LOCALES is not set
> # CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set
> CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y
> # CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set
> CT_LIBC_GLIBC_MIN_KERNEL="3.6.3"
>
> #
> # glibc other options
> #
>
> #
> # WARNING !!!
> #
>
> #
> # For glibc >= 2.8, it can happen that the tarballs
> #
>
> #
> # for the addons are not available for download.
> #
>
> #
> # If that happens, bad luck... Try a previous version
> #
>
> #
> # or try again later... :-(
> #
>
> #
> # Debug facilities
> #
> CT_DEBUG_ltrace=y
> CT_LTRACE_V_0_5_3=y
> # CT_LTRACE_V_0_5_2 is not set
> CT_LTRACE_VERSION="0.5.3"
> CT_LTRACE_0_5_3_or_later=y
> CT_DEBUG_gdb=y
> CT_GDB_CROSS=y
> # CT_GDB_CROSS_STATIC is not set
> CT_GDB_CROSS_PYTHON=y
> CT_GDB_CROSS_EXTRA_CONFIG_ARRAY=""
> CT_GDB_NATIVE=y
> # CT_GDB_NATIVE_STATIC is not set
> CT_GDB_GDBSERVER=y
> CT_GDB_GDBSERVER_STATIC=y
>
> #
> # gdb version
> #
> CT_GDB_V_6_8a=y
> CT_GDB_VERSION="6.8a"
> CT_DEBUG_duma=y
> CT_DUMA_A=y
> CT_DUMA_SO=y
> CT_DUMA_V_2_5_15=y
> CT_DUMA_VERSION="2_5_15"
> CT_DEBUG_dmalloc=y
> CT_DMALLOC_V_5_5_2=y
> CT_DMALLOC_VERSION="5.5.2"
> CT_DEBUG_strace=y
> CT_STRACE_V_4_5_19=y
> # CT_STRACE_V_4_5_18 is not set
> CT_STRACE_VERSION="4.5.19"
>
> #
> # Companion libraries
> #
> CT_COMPLIBS_NEEDED=y
> CT_GMP_NEEDED=y
> CT_MPFR_NEEDED=y
> CT_COMPLIBS=y
> CT_GMP=y
> CT_MPFR=y
> CT_LIBELF_TARGET=y
> # CT_GMP_V_5_0_2 is not set
> # CT_GMP_V_5_0_1 is not set
> CT_GMP_V_4_3_2=y
> # CT_GMP_V_4_3_1 is not set
> # CT_GMP_V_4_3_0 is not set
> CT_GMP_VERSION="4.3.2"
> # CT_MPFR_V_3_1_0 is not set
> # CT_MPFR_V_3_0_1 is not set
> # CT_MPFR_V_3_0_0 is not set
> CT_MPFR_V_2_4_2=y
> # CT_MPFR_V_2_4_1 is not set
> # CT_MPFR_V_2_4_0 is not set
> CT_MPFR_VERSION="2.4.2"
>
> #
> # libelf version needed to build for target
> #
> CT_LIBELF_V_0_8_13=y
> # CT_LIBELF_V_0_8_12 is not set
> CT_LIBELF_VERSION="0.8.13"
>
> #
> # Companion libraries common options
> #
> # CT_COMPLIBS_CHECK is not set
>
> Please help! Thanks.
>
>
> --
> Life is the only flaw in an otherwise perfect nonexistence
> -- Schopenhauer
>
> narke
> public key at http://subkeys.pgp.net:11371 (narkewoody@gmail.com)
Hi woody,
i will try to build it in a qemu inst ... you want to build a toolchain for a bare metal system? ... correct?
Cheers
Thorsten
--
thorsten.johannvorderbrueggen@t-online.de <thorsten.johannvorderbrueggen@t-online.de>
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: cross-ng building trys to copy files to '/' ?
2014-01-09 18:24 ` thorsten.johannvorderbrueggen
@ 2014-01-10 2:42 ` Woody Wu
2014-01-10 8:32 ` Bob Dunlop
1 sibling, 0 replies; 6+ messages in thread
From: Woody Wu @ 2014-01-10 2:42 UTC (permalink / raw)
To: thorsten.johannvorderbrueggen; +Cc: crossgcc
On 10 January 2014 02:24, thorsten.johannvorderbrueggen@t-online.de
<thorsten.johannvorderbrueggen@t-online.de> wrote:
> On Thu, 9 Jan 2014 13:48:02 +0800
> Woody Wu <narkewoody@gmail.com> wrote:
>
>> On 9 January 2014 03:01, thorsten.johannvorderbrueggen@t-online.de
>> <thorsten.johannvorderbrueggen@t-online.de> wrote:
>> > On Wed, 8 Jan 2014 22:32:38 +0800
>> > narkewoody@gmail.com wrote:
>> >
>> >> Hi,
>> >>
>> >> I am building ARM toolchain using cross-ng on my Slackware Linux PC.
>> >> I've tried 1.17 and 1.18 - the two most recent release, but met the same
>> >> error in building (ct-ng build). It seems, cross-ng was trying to
>> >> install some header files into my /usr/include and then failed because
>> >> it was not running as root.
>> >>
>> >> Can anyone help me? Below is the output:
>> >>
>> >> ...
>> >>
>> >> [ALL ] mv -f /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.makeT /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.make
>> >> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
>> >> [ALL ] make[2]: Entering directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
>> >> [ALL ] /home/woody/work/cross-ng.build/1.17.0/.build/tools/bin/install -c -m 644 include/limits.h /usr/include/limits.h
>> >> [ALL ] /usr/bin/ginstall: cannot remove '/usr/include/limits.h': Permission denied
>> >> [ERROR] make[2]: *** [/usr/include/limits.h] Error 1
>> >> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9'
>> >> [ERROR] make[1]: *** [install-headers] Error 2
>> >> [ALL ] make[1]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles'
>> >> [ERROR]
>> >> [ERROR] >>
>> >> [ERROR] >> Build failed in step 'Installing C library headers & start files'
>> >> [ERROR] >> called in step '(top-level)'
>> >> [ERROR] >>
>> >> [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@258]
>> >> [ERROR] >> called from: do_libc_backend_once[scripts/build/libc/glibc-eglibc.sh-common@384]
>> >>
>> >> ...
>> >>
>> >> --
>> >> For unsubscribe information see http://sourceware.org/lists.html#faq
>> >>
>> >
>> >
>> > Hi woody,
>> >
>> > i used 1.18 and actual 1.19 for building my arm toolchain ... on slackware ... of course :-) ... i had no problems ... can you post your config ...
>> >
>> > Cheers
>> > Thorsten
>> >
>>
>> Nice to meet you Thorsten. My Slackware is 14.0. Now I paste the
>> '.config' file from my work directory, please have a look at it. If
>> you still need other information, please let me know.
>>
>> #
>> # C-library
>> #
>> CT_LIBC="glibc"
>> CT_LIBC_VERSION="2.9"
>> # CT_LIBC_eglibc is not set
>> # CT_LIBC_uClibc is not set
>> CT_LIBC_glibc=y
>> CT_LIBC_none_AVAILABLE=y
>> CT_LIBC_mingw_AVAILABLE=y
>> CT_LIBC_eglibc_AVAILABLE=y
>> CT_LIBC_newlib_AVAILABLE=y
>> CT_LIBC_uClibc_AVAILABLE=y
>> CT_LIBC_glibc_AVAILABLE=y
>> # CT_LIBC_GLIBC_V_2_14_1 is not set
>> # CT_LIBC_GLIBC_V_2_14 is not set
>> # CT_LIBC_GLIBC_V_2_13 is not set
>> # CT_LIBC_GLIBC_V_2_12_2 is not set
>> # CT_LIBC_GLIBC_V_2_12_1 is not set
>> # CT_LIBC_GLIBC_V_2_11_1 is not set
>> # CT_LIBC_GLIBC_V_2_11 is not set
>> # CT_LIBC_GLIBC_V_2_10_1 is not set
>> CT_LIBC_GLIBC_V_2_9=y
>> # CT_LIBC_GLIBC_V_2_8 is not set
>> CT_LIBC_SUPPORT_THREADS_ANY=y
>> CT_LIBC_SUPPORT_NPTL=y
>> CT_THREADS="nptl"
>>
>> #
>> # Common C library options
>> #
>> CT_THREADS_NPTL=y
>> CT_LIBC_XLDD=y
>> CT_LIBC_GLIBC_MAY_FORCE_PORTS=y
>> CT_LIBC_glibc_familly=y
>> CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY=""
>> CT_LIBC_GLIBC_CONFIGPARMS=""
>> CT_LIBC_GLIBC_EXTRA_CFLAGS=""
>> CT_LIBC_EXTRA_CC_ARGS=""
>> # CT_LIBC_DISABLE_VERSIONING is not set
>> CT_LIBC_OLDEST_ABI=""
>> # CT_LIBC_GLIBC_FORCE_UNWIND is not set
>> CT_LIBC_GLIBC_USE_PORTS=y
>> CT_LIBC_ADDONS_LIST=""
>> # CT_LIBC_LOCALES is not set
>> # CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set
>> CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y
>> # CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set
>> CT_LIBC_GLIBC_MIN_KERNEL="3.6.3"
>>
>> #
>> # glibc other options
>> #
>>
>> #
>> # WARNING !!!
>> #
>>
>> #
>> # For glibc >= 2.8, it can happen that the tarballs
>> #
>>
>> #
>> # for the addons are not available for download.
>> #
>>
>> #
>> # If that happens, bad luck... Try a previous version
>> #
>>
>> #
>> # or try again later... :-(
>> #
>>
>> #
>> # Debug facilities
>> #
>> CT_DEBUG_ltrace=y
>> CT_LTRACE_V_0_5_3=y
>> # CT_LTRACE_V_0_5_2 is not set
>> CT_LTRACE_VERSION="0.5.3"
>> CT_LTRACE_0_5_3_or_later=y
>> CT_DEBUG_gdb=y
>> CT_GDB_CROSS=y
>> # CT_GDB_CROSS_STATIC is not set
>> CT_GDB_CROSS_PYTHON=y
>> CT_GDB_CROSS_EXTRA_CONFIG_ARRAY=""
>> CT_GDB_NATIVE=y
>> # CT_GDB_NATIVE_STATIC is not set
>> CT_GDB_GDBSERVER=y
>> CT_GDB_GDBSERVER_STATIC=y
>>
>> #
>> # gdb version
>> #
>> CT_GDB_V_6_8a=y
>> CT_GDB_VERSION="6.8a"
>> CT_DEBUG_duma=y
>> CT_DUMA_A=y
>> CT_DUMA_SO=y
>> CT_DUMA_V_2_5_15=y
>> CT_DUMA_VERSION="2_5_15"
>> CT_DEBUG_dmalloc=y
>> CT_DMALLOC_V_5_5_2=y
>> CT_DMALLOC_VERSION="5.5.2"
>> CT_DEBUG_strace=y
>> CT_STRACE_V_4_5_19=y
>> # CT_STRACE_V_4_5_18 is not set
>> CT_STRACE_VERSION="4.5.19"
>>
>> #
>> # Companion libraries
>> #
>> CT_COMPLIBS_NEEDED=y
>> CT_GMP_NEEDED=y
>> CT_MPFR_NEEDED=y
>> CT_COMPLIBS=y
>> CT_GMP=y
>> CT_MPFR=y
>> CT_LIBELF_TARGET=y
>> # CT_GMP_V_5_0_2 is not set
>> # CT_GMP_V_5_0_1 is not set
>> CT_GMP_V_4_3_2=y
>> # CT_GMP_V_4_3_1 is not set
>> # CT_GMP_V_4_3_0 is not set
>> CT_GMP_VERSION="4.3.2"
>> # CT_MPFR_V_3_1_0 is not set
>> # CT_MPFR_V_3_0_1 is not set
>> # CT_MPFR_V_3_0_0 is not set
>> CT_MPFR_V_2_4_2=y
>> # CT_MPFR_V_2_4_1 is not set
>> # CT_MPFR_V_2_4_0 is not set
>> CT_MPFR_VERSION="2.4.2"
>>
>> #
>> # libelf version needed to build for target
>> #
>> CT_LIBELF_V_0_8_13=y
>> # CT_LIBELF_V_0_8_12 is not set
>> CT_LIBELF_VERSION="0.8.13"
>>
>> #
>> # Companion libraries common options
>> #
>> # CT_COMPLIBS_CHECK is not set
>>
>> Please help! Thanks.
>>
>>
>> --
>> Life is the only flaw in an otherwise perfect nonexistence
>> -- Schopenhauer
>>
>> narke
>> public key at http://subkeys.pgp.net:11371 (narkewoody@gmail.com)
>
> Hi woody,
>
> i will try to build it in a qemu inst ... you want to build a toolchain for a bare metal system? ... correct?
>
> Cheers
> Thorsten
>
> --
Hi Thorsten, I was building a toolchain for GNU Linux target which run
on a ARMv5T SoC.
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: cross-ng building trys to copy files to '/' ?
2014-01-09 18:24 ` thorsten.johannvorderbrueggen
2014-01-10 2:42 ` Woody Wu
@ 2014-01-10 8:32 ` Bob Dunlop
2014-01-10 12:41 ` Woody Wu
1 sibling, 1 reply; 6+ messages in thread
From: Bob Dunlop @ 2014-01-10 8:32 UTC (permalink / raw)
To: crossgcc
Hi,
> I am building ARM toolchain using cross-ng on my Slackware Linux PC.
> I've tried 1.17 and 1.18 - the two most recent release, but met the same
> error in building (ct-ng build). It seems, cross-ng was trying to
> install some header files into my /usr/include and then failed because
> it was not running as root.
>
> Can anyone help me? Below is the output:
I'm coming into the conversation late but has anyone tried the obvious.
What is CT_PREFIX_DIR set to ?
This is the target directory for CT and it's parent needs to be writeable
by the building user.
--
Bob Dunlop
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: cross-ng building trys to copy files to '/' ?
2014-01-10 8:32 ` Bob Dunlop
@ 2014-01-10 12:41 ` Woody Wu
0 siblings, 0 replies; 6+ messages in thread
From: Woody Wu @ 2014-01-10 12:41 UTC (permalink / raw)
To: crossgcc
On 10 January 2014 16:32, Bob Dunlop <bob.dunlop@xyzzy.org.uk> wrote:
> Hi,
>
>> I am building ARM toolchain using cross-ng on my Slackware Linux PC.
>> I've tried 1.17 and 1.18 - the two most recent release, but met the same
>> error in building (ct-ng build). It seems, cross-ng was trying to
>> install some header files into my /usr/include and then failed because
>> it was not running as root.
>>
>> Can anyone help me? Below is the output:
>
> I'm coming into the conversation late but has anyone tried the obvious.
>
> What is CT_PREFIX_DIR set to ?
>
it is "${HOME}/x-tools/${CT_TARGET}". This directory is writable to
the building user.
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-01-10 12:41 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-08 14:33 cross-ng building trys to copy files to '/' ? narkewoody
2014-01-08 19:01 ` thorsten.johannvorderbrueggen
[not found] ` <CAAsE_uepmdsn1YOux0U9W9D1PKJ6KpVmV4=mSh=+jjmBLY4BJA@mail.gmail.com>
2014-01-09 18:24 ` thorsten.johannvorderbrueggen
2014-01-10 2:42 ` Woody Wu
2014-01-10 8:32 ` Bob Dunlop
2014-01-10 12:41 ` Woody Wu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).