* cross-ng building trys to copy files to '/' ? @ 2014-01-08 14:33 narkewoody 2014-01-08 19:01 ` thorsten.johannvorderbrueggen 0 siblings, 1 reply; 6+ messages in thread From: narkewoody @ 2014-01-08 14:33 UTC (permalink / raw) To: crossgcc Hi, I am building ARM toolchain using cross-ng on my Slackware Linux PC. I've tried 1.17 and 1.18 - the two most recent release, but met the same error in building (ct-ng build). It seems, cross-ng was trying to install some header files into my /usr/include and then failed because it was not running as root. Can anyone help me? Below is the output: ... [ALL ] mv -f /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.makeT /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.make [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' [ALL ] make[2]: Entering directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' [ALL ] /home/woody/work/cross-ng.build/1.17.0/.build/tools/bin/install -c -m 644 include/limits.h /usr/include/limits.h [ALL ] /usr/bin/ginstall: cannot remove '/usr/include/limits.h': Permission denied [ERROR] make[2]: *** [/usr/include/limits.h] Error 1 [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' [ERROR] make[1]: *** [install-headers] Error 2 [ALL ] make[1]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles' [ERROR] [ERROR] >> [ERROR] >> Build failed in step 'Installing C library headers & start files' [ERROR] >> called in step '(top-level)' [ERROR] >> [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@258] [ERROR] >> called from: do_libc_backend_once[scripts/build/libc/glibc-eglibc.sh-common@384] ... -- For unsubscribe information see http://sourceware.org/lists.html#faq ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: cross-ng building trys to copy files to '/' ? 2014-01-08 14:33 cross-ng building trys to copy files to '/' ? narkewoody @ 2014-01-08 19:01 ` thorsten.johannvorderbrueggen [not found] ` <CAAsE_uepmdsn1YOux0U9W9D1PKJ6KpVmV4=mSh=+jjmBLY4BJA@mail.gmail.com> 0 siblings, 1 reply; 6+ messages in thread From: thorsten.johannvorderbrueggen @ 2014-01-08 19:01 UTC (permalink / raw) To: crossgcc On Wed, 8 Jan 2014 22:32:38 +0800 narkewoody@gmail.com wrote: > Hi, > > I am building ARM toolchain using cross-ng on my Slackware Linux PC. > I've tried 1.17 and 1.18 - the two most recent release, but met the same > error in building (ct-ng build). It seems, cross-ng was trying to > install some header files into my /usr/include and then failed because > it was not running as root. > > Can anyone help me? Below is the output: > > ... > > [ALL ] mv -f /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.makeT /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.make > [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' > [ALL ] make[2]: Entering directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' > [ALL ] /home/woody/work/cross-ng.build/1.17.0/.build/tools/bin/install -c -m 644 include/limits.h /usr/include/limits.h > [ALL ] /usr/bin/ginstall: cannot remove '/usr/include/limits.h': Permission denied > [ERROR] make[2]: *** [/usr/include/limits.h] Error 1 > [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' > [ERROR] make[1]: *** [install-headers] Error 2 > [ALL ] make[1]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles' > [ERROR] > [ERROR] >> > [ERROR] >> Build failed in step 'Installing C library headers & start files' > [ERROR] >> called in step '(top-level)' > [ERROR] >> > [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@258] > [ERROR] >> called from: do_libc_backend_once[scripts/build/libc/glibc-eglibc.sh-common@384] > > ... > > -- > For unsubscribe information see http://sourceware.org/lists.html#faq > Hi woody, i used 1.18 and actual 1.19 for building my arm toolchain ... on slackware ... of course :-) ... i had no problems ... can you post your config ... Cheers Thorsten -- thorsten.johannvorderbrueggen@t-online.de <thorsten.johannvorderbrueggen@t-online.de> -- For unsubscribe information see http://sourceware.org/lists.html#faq ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <CAAsE_uepmdsn1YOux0U9W9D1PKJ6KpVmV4=mSh=+jjmBLY4BJA@mail.gmail.com>]
* Re: cross-ng building trys to copy files to '/' ? [not found] ` <CAAsE_uepmdsn1YOux0U9W9D1PKJ6KpVmV4=mSh=+jjmBLY4BJA@mail.gmail.com> @ 2014-01-09 18:24 ` thorsten.johannvorderbrueggen 2014-01-10 2:42 ` Woody Wu 2014-01-10 8:32 ` Bob Dunlop 0 siblings, 2 replies; 6+ messages in thread From: thorsten.johannvorderbrueggen @ 2014-01-09 18:24 UTC (permalink / raw) To: crossgcc On Thu, 9 Jan 2014 13:48:02 +0800 Woody Wu <narkewoody@gmail.com> wrote: > On 9 January 2014 03:01, thorsten.johannvorderbrueggen@t-online.de > <thorsten.johannvorderbrueggen@t-online.de> wrote: > > On Wed, 8 Jan 2014 22:32:38 +0800 > > narkewoody@gmail.com wrote: > > > >> Hi, > >> > >> I am building ARM toolchain using cross-ng on my Slackware Linux PC. > >> I've tried 1.17 and 1.18 - the two most recent release, but met the same > >> error in building (ct-ng build). It seems, cross-ng was trying to > >> install some header files into my /usr/include and then failed because > >> it was not running as root. > >> > >> Can anyone help me? Below is the output: > >> > >> ... > >> > >> [ALL ] mv -f /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.makeT /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.make > >> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' > >> [ALL ] make[2]: Entering directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' > >> [ALL ] /home/woody/work/cross-ng.build/1.17.0/.build/tools/bin/install -c -m 644 include/limits.h /usr/include/limits.h > >> [ALL ] /usr/bin/ginstall: cannot remove '/usr/include/limits.h': Permission denied > >> [ERROR] make[2]: *** [/usr/include/limits.h] Error 1 > >> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' > >> [ERROR] make[1]: *** [install-headers] Error 2 > >> [ALL ] make[1]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles' > >> [ERROR] > >> [ERROR] >> > >> [ERROR] >> Build failed in step 'Installing C library headers & start files' > >> [ERROR] >> called in step '(top-level)' > >> [ERROR] >> > >> [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@258] > >> [ERROR] >> called from: do_libc_backend_once[scripts/build/libc/glibc-eglibc.sh-common@384] > >> > >> ... > >> > >> -- > >> For unsubscribe information see http://sourceware.org/lists.html#faq > >> > > > > > > Hi woody, > > > > i used 1.18 and actual 1.19 for building my arm toolchain ... on slackware ... of course :-) ... i had no problems ... can you post your config ... > > > > Cheers > > Thorsten > > > > Nice to meet you Thorsten. My Slackware is 14.0. Now I paste the > '.config' file from my work directory, please have a look at it. If > you still need other information, please let me know. > > # > # C-library > # > CT_LIBC="glibc" > CT_LIBC_VERSION="2.9" > # CT_LIBC_eglibc is not set > # CT_LIBC_uClibc is not set > CT_LIBC_glibc=y > CT_LIBC_none_AVAILABLE=y > CT_LIBC_mingw_AVAILABLE=y > CT_LIBC_eglibc_AVAILABLE=y > CT_LIBC_newlib_AVAILABLE=y > CT_LIBC_uClibc_AVAILABLE=y > CT_LIBC_glibc_AVAILABLE=y > # CT_LIBC_GLIBC_V_2_14_1 is not set > # CT_LIBC_GLIBC_V_2_14 is not set > # CT_LIBC_GLIBC_V_2_13 is not set > # CT_LIBC_GLIBC_V_2_12_2 is not set > # CT_LIBC_GLIBC_V_2_12_1 is not set > # CT_LIBC_GLIBC_V_2_11_1 is not set > # CT_LIBC_GLIBC_V_2_11 is not set > # CT_LIBC_GLIBC_V_2_10_1 is not set > CT_LIBC_GLIBC_V_2_9=y > # CT_LIBC_GLIBC_V_2_8 is not set > CT_LIBC_SUPPORT_THREADS_ANY=y > CT_LIBC_SUPPORT_NPTL=y > CT_THREADS="nptl" > > # > # Common C library options > # > CT_THREADS_NPTL=y > CT_LIBC_XLDD=y > CT_LIBC_GLIBC_MAY_FORCE_PORTS=y > CT_LIBC_glibc_familly=y > CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY="" > CT_LIBC_GLIBC_CONFIGPARMS="" > CT_LIBC_GLIBC_EXTRA_CFLAGS="" > CT_LIBC_EXTRA_CC_ARGS="" > # CT_LIBC_DISABLE_VERSIONING is not set > CT_LIBC_OLDEST_ABI="" > # CT_LIBC_GLIBC_FORCE_UNWIND is not set > CT_LIBC_GLIBC_USE_PORTS=y > CT_LIBC_ADDONS_LIST="" > # CT_LIBC_LOCALES is not set > # CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set > CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y > # CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set > CT_LIBC_GLIBC_MIN_KERNEL="3.6.3" > > # > # glibc other options > # > > # > # WARNING !!! > # > > # > # For glibc >= 2.8, it can happen that the tarballs > # > > # > # for the addons are not available for download. > # > > # > # If that happens, bad luck... Try a previous version > # > > # > # or try again later... :-( > # > > # > # Debug facilities > # > CT_DEBUG_ltrace=y > CT_LTRACE_V_0_5_3=y > # CT_LTRACE_V_0_5_2 is not set > CT_LTRACE_VERSION="0.5.3" > CT_LTRACE_0_5_3_or_later=y > CT_DEBUG_gdb=y > CT_GDB_CROSS=y > # CT_GDB_CROSS_STATIC is not set > CT_GDB_CROSS_PYTHON=y > CT_GDB_CROSS_EXTRA_CONFIG_ARRAY="" > CT_GDB_NATIVE=y > # CT_GDB_NATIVE_STATIC is not set > CT_GDB_GDBSERVER=y > CT_GDB_GDBSERVER_STATIC=y > > # > # gdb version > # > CT_GDB_V_6_8a=y > CT_GDB_VERSION="6.8a" > CT_DEBUG_duma=y > CT_DUMA_A=y > CT_DUMA_SO=y > CT_DUMA_V_2_5_15=y > CT_DUMA_VERSION="2_5_15" > CT_DEBUG_dmalloc=y > CT_DMALLOC_V_5_5_2=y > CT_DMALLOC_VERSION="5.5.2" > CT_DEBUG_strace=y > CT_STRACE_V_4_5_19=y > # CT_STRACE_V_4_5_18 is not set > CT_STRACE_VERSION="4.5.19" > > # > # Companion libraries > # > CT_COMPLIBS_NEEDED=y > CT_GMP_NEEDED=y > CT_MPFR_NEEDED=y > CT_COMPLIBS=y > CT_GMP=y > CT_MPFR=y > CT_LIBELF_TARGET=y > # CT_GMP_V_5_0_2 is not set > # CT_GMP_V_5_0_1 is not set > CT_GMP_V_4_3_2=y > # CT_GMP_V_4_3_1 is not set > # CT_GMP_V_4_3_0 is not set > CT_GMP_VERSION="4.3.2" > # CT_MPFR_V_3_1_0 is not set > # CT_MPFR_V_3_0_1 is not set > # CT_MPFR_V_3_0_0 is not set > CT_MPFR_V_2_4_2=y > # CT_MPFR_V_2_4_1 is not set > # CT_MPFR_V_2_4_0 is not set > CT_MPFR_VERSION="2.4.2" > > # > # libelf version needed to build for target > # > CT_LIBELF_V_0_8_13=y > # CT_LIBELF_V_0_8_12 is not set > CT_LIBELF_VERSION="0.8.13" > > # > # Companion libraries common options > # > # CT_COMPLIBS_CHECK is not set > > Please help! Thanks. > > > -- > Life is the only flaw in an otherwise perfect nonexistence > -- Schopenhauer > > narke > public key at http://subkeys.pgp.net:11371 (narkewoody@gmail.com) Hi woody, i will try to build it in a qemu inst ... you want to build a toolchain for a bare metal system? ... correct? Cheers Thorsten -- thorsten.johannvorderbrueggen@t-online.de <thorsten.johannvorderbrueggen@t-online.de> -- For unsubscribe information see http://sourceware.org/lists.html#faq ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: cross-ng building trys to copy files to '/' ? 2014-01-09 18:24 ` thorsten.johannvorderbrueggen @ 2014-01-10 2:42 ` Woody Wu 2014-01-10 8:32 ` Bob Dunlop 1 sibling, 0 replies; 6+ messages in thread From: Woody Wu @ 2014-01-10 2:42 UTC (permalink / raw) To: thorsten.johannvorderbrueggen; +Cc: crossgcc On 10 January 2014 02:24, thorsten.johannvorderbrueggen@t-online.de <thorsten.johannvorderbrueggen@t-online.de> wrote: > On Thu, 9 Jan 2014 13:48:02 +0800 > Woody Wu <narkewoody@gmail.com> wrote: > >> On 9 January 2014 03:01, thorsten.johannvorderbrueggen@t-online.de >> <thorsten.johannvorderbrueggen@t-online.de> wrote: >> > On Wed, 8 Jan 2014 22:32:38 +0800 >> > narkewoody@gmail.com wrote: >> > >> >> Hi, >> >> >> >> I am building ARM toolchain using cross-ng on my Slackware Linux PC. >> >> I've tried 1.17 and 1.18 - the two most recent release, but met the same >> >> error in building (ct-ng build). It seems, cross-ng was trying to >> >> install some header files into my /usr/include and then failed because >> >> it was not running as root. >> >> >> >> Can anyone help me? Below is the output: >> >> >> >> ... >> >> >> >> [ALL ] mv -f /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.makeT /home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles/tls.make >> >> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' >> >> [ALL ] make[2]: Entering directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' >> >> [ALL ] /home/woody/work/cross-ng.build/1.17.0/.build/tools/bin/install -c -m 644 include/limits.h /usr/include/limits.h >> >> [ALL ] /usr/bin/ginstall: cannot remove '/usr/include/limits.h': Permission denied >> >> [ERROR] make[2]: *** [/usr/include/limits.h] Error 1 >> >> [ALL ] make[2]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/src/glibc-2.9' >> >> [ERROR] make[1]: *** [install-headers] Error 2 >> >> [ALL ] make[1]: Leaving directory `/home/woody/work/cross-ng.build/1.17.0/.build/arm-unknown-linux-gnueabi/build/build-libc-startfiles' >> >> [ERROR] >> >> [ERROR] >> >> >> [ERROR] >> Build failed in step 'Installing C library headers & start files' >> >> [ERROR] >> called in step '(top-level)' >> >> [ERROR] >> >> >> [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions@258] >> >> [ERROR] >> called from: do_libc_backend_once[scripts/build/libc/glibc-eglibc.sh-common@384] >> >> >> >> ... >> >> >> >> -- >> >> For unsubscribe information see http://sourceware.org/lists.html#faq >> >> >> > >> > >> > Hi woody, >> > >> > i used 1.18 and actual 1.19 for building my arm toolchain ... on slackware ... of course :-) ... i had no problems ... can you post your config ... >> > >> > Cheers >> > Thorsten >> > >> >> Nice to meet you Thorsten. My Slackware is 14.0. Now I paste the >> '.config' file from my work directory, please have a look at it. If >> you still need other information, please let me know. >> >> # >> # C-library >> # >> CT_LIBC="glibc" >> CT_LIBC_VERSION="2.9" >> # CT_LIBC_eglibc is not set >> # CT_LIBC_uClibc is not set >> CT_LIBC_glibc=y >> CT_LIBC_none_AVAILABLE=y >> CT_LIBC_mingw_AVAILABLE=y >> CT_LIBC_eglibc_AVAILABLE=y >> CT_LIBC_newlib_AVAILABLE=y >> CT_LIBC_uClibc_AVAILABLE=y >> CT_LIBC_glibc_AVAILABLE=y >> # CT_LIBC_GLIBC_V_2_14_1 is not set >> # CT_LIBC_GLIBC_V_2_14 is not set >> # CT_LIBC_GLIBC_V_2_13 is not set >> # CT_LIBC_GLIBC_V_2_12_2 is not set >> # CT_LIBC_GLIBC_V_2_12_1 is not set >> # CT_LIBC_GLIBC_V_2_11_1 is not set >> # CT_LIBC_GLIBC_V_2_11 is not set >> # CT_LIBC_GLIBC_V_2_10_1 is not set >> CT_LIBC_GLIBC_V_2_9=y >> # CT_LIBC_GLIBC_V_2_8 is not set >> CT_LIBC_SUPPORT_THREADS_ANY=y >> CT_LIBC_SUPPORT_NPTL=y >> CT_THREADS="nptl" >> >> # >> # Common C library options >> # >> CT_THREADS_NPTL=y >> CT_LIBC_XLDD=y >> CT_LIBC_GLIBC_MAY_FORCE_PORTS=y >> CT_LIBC_glibc_familly=y >> CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY="" >> CT_LIBC_GLIBC_CONFIGPARMS="" >> CT_LIBC_GLIBC_EXTRA_CFLAGS="" >> CT_LIBC_EXTRA_CC_ARGS="" >> # CT_LIBC_DISABLE_VERSIONING is not set >> CT_LIBC_OLDEST_ABI="" >> # CT_LIBC_GLIBC_FORCE_UNWIND is not set >> CT_LIBC_GLIBC_USE_PORTS=y >> CT_LIBC_ADDONS_LIST="" >> # CT_LIBC_LOCALES is not set >> # CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set >> CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y >> # CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set >> CT_LIBC_GLIBC_MIN_KERNEL="3.6.3" >> >> # >> # glibc other options >> # >> >> # >> # WARNING !!! >> # >> >> # >> # For glibc >= 2.8, it can happen that the tarballs >> # >> >> # >> # for the addons are not available for download. >> # >> >> # >> # If that happens, bad luck... Try a previous version >> # >> >> # >> # or try again later... :-( >> # >> >> # >> # Debug facilities >> # >> CT_DEBUG_ltrace=y >> CT_LTRACE_V_0_5_3=y >> # CT_LTRACE_V_0_5_2 is not set >> CT_LTRACE_VERSION="0.5.3" >> CT_LTRACE_0_5_3_or_later=y >> CT_DEBUG_gdb=y >> CT_GDB_CROSS=y >> # CT_GDB_CROSS_STATIC is not set >> CT_GDB_CROSS_PYTHON=y >> CT_GDB_CROSS_EXTRA_CONFIG_ARRAY="" >> CT_GDB_NATIVE=y >> # CT_GDB_NATIVE_STATIC is not set >> CT_GDB_GDBSERVER=y >> CT_GDB_GDBSERVER_STATIC=y >> >> # >> # gdb version >> # >> CT_GDB_V_6_8a=y >> CT_GDB_VERSION="6.8a" >> CT_DEBUG_duma=y >> CT_DUMA_A=y >> CT_DUMA_SO=y >> CT_DUMA_V_2_5_15=y >> CT_DUMA_VERSION="2_5_15" >> CT_DEBUG_dmalloc=y >> CT_DMALLOC_V_5_5_2=y >> CT_DMALLOC_VERSION="5.5.2" >> CT_DEBUG_strace=y >> CT_STRACE_V_4_5_19=y >> # CT_STRACE_V_4_5_18 is not set >> CT_STRACE_VERSION="4.5.19" >> >> # >> # Companion libraries >> # >> CT_COMPLIBS_NEEDED=y >> CT_GMP_NEEDED=y >> CT_MPFR_NEEDED=y >> CT_COMPLIBS=y >> CT_GMP=y >> CT_MPFR=y >> CT_LIBELF_TARGET=y >> # CT_GMP_V_5_0_2 is not set >> # CT_GMP_V_5_0_1 is not set >> CT_GMP_V_4_3_2=y >> # CT_GMP_V_4_3_1 is not set >> # CT_GMP_V_4_3_0 is not set >> CT_GMP_VERSION="4.3.2" >> # CT_MPFR_V_3_1_0 is not set >> # CT_MPFR_V_3_0_1 is not set >> # CT_MPFR_V_3_0_0 is not set >> CT_MPFR_V_2_4_2=y >> # CT_MPFR_V_2_4_1 is not set >> # CT_MPFR_V_2_4_0 is not set >> CT_MPFR_VERSION="2.4.2" >> >> # >> # libelf version needed to build for target >> # >> CT_LIBELF_V_0_8_13=y >> # CT_LIBELF_V_0_8_12 is not set >> CT_LIBELF_VERSION="0.8.13" >> >> # >> # Companion libraries common options >> # >> # CT_COMPLIBS_CHECK is not set >> >> Please help! Thanks. >> >> >> -- >> Life is the only flaw in an otherwise perfect nonexistence >> -- Schopenhauer >> >> narke >> public key at http://subkeys.pgp.net:11371 (narkewoody@gmail.com) > > Hi woody, > > i will try to build it in a qemu inst ... you want to build a toolchain for a bare metal system? ... correct? > > Cheers > Thorsten > > -- Hi Thorsten, I was building a toolchain for GNU Linux target which run on a ARMv5T SoC. -- For unsubscribe information see http://sourceware.org/lists.html#faq ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: cross-ng building trys to copy files to '/' ? 2014-01-09 18:24 ` thorsten.johannvorderbrueggen 2014-01-10 2:42 ` Woody Wu @ 2014-01-10 8:32 ` Bob Dunlop 2014-01-10 12:41 ` Woody Wu 1 sibling, 1 reply; 6+ messages in thread From: Bob Dunlop @ 2014-01-10 8:32 UTC (permalink / raw) To: crossgcc Hi, > I am building ARM toolchain using cross-ng on my Slackware Linux PC. > I've tried 1.17 and 1.18 - the two most recent release, but met the same > error in building (ct-ng build). It seems, cross-ng was trying to > install some header files into my /usr/include and then failed because > it was not running as root. > > Can anyone help me? Below is the output: I'm coming into the conversation late but has anyone tried the obvious. What is CT_PREFIX_DIR set to ? This is the target directory for CT and it's parent needs to be writeable by the building user. -- Bob Dunlop -- For unsubscribe information see http://sourceware.org/lists.html#faq ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: cross-ng building trys to copy files to '/' ? 2014-01-10 8:32 ` Bob Dunlop @ 2014-01-10 12:41 ` Woody Wu 0 siblings, 0 replies; 6+ messages in thread From: Woody Wu @ 2014-01-10 12:41 UTC (permalink / raw) To: crossgcc On 10 January 2014 16:32, Bob Dunlop <bob.dunlop@xyzzy.org.uk> wrote: > Hi, > >> I am building ARM toolchain using cross-ng on my Slackware Linux PC. >> I've tried 1.17 and 1.18 - the two most recent release, but met the same >> error in building (ct-ng build). It seems, cross-ng was trying to >> install some header files into my /usr/include and then failed because >> it was not running as root. >> >> Can anyone help me? Below is the output: > > I'm coming into the conversation late but has anyone tried the obvious. > > What is CT_PREFIX_DIR set to ? > it is "${HOME}/x-tools/${CT_TARGET}". This directory is writable to the building user. -- For unsubscribe information see http://sourceware.org/lists.html#faq ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-01-10 12:41 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-08 14:33 cross-ng building trys to copy files to '/' ? narkewoody
2014-01-08 19:01 ` thorsten.johannvorderbrueggen
[not found] ` <CAAsE_uepmdsn1YOux0U9W9D1PKJ6KpVmV4=mSh=+jjmBLY4BJA@mail.gmail.com>
2014-01-09 18:24 ` thorsten.johannvorderbrueggen
2014-01-10 2:42 ` Woody Wu
2014-01-10 8:32 ` Bob Dunlop
2014-01-10 12:41 ` Woody Wu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).