* Attn: gcc maintainer - calm: WARNING: package 'libgccjit0' doesn't have a curr version [not found] <162792485893.1067698.6637349784371762085@server2.sourceware.org> @ 2021-08-02 17:30 ` Brian Inglis 2021-08-02 18:17 ` Achim Gratz 0 siblings, 1 reply; 4+ messages in thread From: Brian Inglis @ 2021-08-02 17:30 UTC (permalink / raw) To: cygwin-apps On 2021-08-02 11:20, cygwin-apps@cygwin.com wrote: > WARNING: package 'libgccjit0' doesn't have a curr version > WARNING: package 'libgccjit0' doesn't have a curr version > WARNING: package 'libgccjit0' doesn't have a curr version > WARNING: package 'libgccjit0' doesn't have a curr version Achim, These messages are probably appearing on all package upload reports. -- Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada This email may be disturbing to some readers as it contains too much technical detail. Reader discretion is advised. [Data in binary units and prefixes, physical quantities in SI.] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Attn: gcc maintainer - calm: WARNING: package 'libgccjit0' doesn't have a curr version 2021-08-02 17:30 ` Attn: gcc maintainer - calm: WARNING: package 'libgccjit0' doesn't have a curr version Brian Inglis @ 2021-08-02 18:17 ` Achim Gratz 2021-08-02 19:20 ` Jon Turney 0 siblings, 1 reply; 4+ messages in thread From: Achim Gratz @ 2021-08-02 18:17 UTC (permalink / raw) To: cygwin-apps Brian Inglis writes: > On 2021-08-02 11:20, cygwin-apps-rDBXBDvO6BXQT0dZR+AlfA@public.gmane.org wrote: >> WARNING: package 'libgccjit0' doesn't have a curr version >> WARNING: package 'libgccjit0' doesn't have a curr version >> WARNING: package 'libgccjit0' doesn't have a curr version >> WARNING: package 'libgccjit0' doesn't have a curr version > > These messages are probably appearing on all package upload reports. So what, it's just a warning? This package is indeed not yet available as "current" because it's a new package introduced as "test". Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptation for Waldorf Blofeld V1.15B11: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Attn: gcc maintainer - calm: WARNING: package 'libgccjit0' doesn't have a curr version 2021-08-02 18:17 ` Achim Gratz @ 2021-08-02 19:20 ` Jon Turney 2021-08-02 20:52 ` Brian Inglis 0 siblings, 1 reply; 4+ messages in thread From: Jon Turney @ 2021-08-02 19:20 UTC (permalink / raw) To: cygwin-apps On 02/08/2021 19:17, Achim Gratz wrote: > Brian Inglis writes: >> On 2021-08-02 11:20, cygwin-apps-rDBXBDvO6BXQT0dZR+AlfA-XMD5yJDbdMReXY1tMh2IBg@public.gmane.org wrote: >>> WARNING: package 'libgccjit0' doesn't have a curr version >>> WARNING: package 'libgccjit0' doesn't have a curr version >>> WARNING: package 'libgccjit0' doesn't have a curr version >>> WARNING: package 'libgccjit0' doesn't have a curr version >> >> These messages are probably appearing on all package upload reports. > > So what, it's just a warning? This package is indeed not yet available > as "current" because it's a new package introduced as "test". Yeah. Unfortunately, because of the way calm works, this warning appears in the report for any upload, which is perhaps confusing. I've configured a suppression for this warning (which is what I usually do when this situation is intended). ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Attn: gcc maintainer - calm: WARNING: package 'libgccjit0' doesn't have a curr version 2021-08-02 19:20 ` Jon Turney @ 2021-08-02 20:52 ` Brian Inglis 0 siblings, 0 replies; 4+ messages in thread From: Brian Inglis @ 2021-08-02 20:52 UTC (permalink / raw) To: cygwin-apps On 2021-08-02 13:20, Jon Turney wrote: > On 02/08/2021 19:17, Achim Gratz wrote: >> Brian Inglis writes: >>> On 2021-08-02 11:20, >>> cygwin-apps-rDBXBDvO6BXQT0dZR+AlfA-XMD5yJDbdMReXY1tMh2IBg@public.gmane.org >>> wrote: >>>> WARNING: package 'libgccjit0' doesn't have a curr version >>>> WARNING: package 'libgccjit0' doesn't have a curr version >>>> WARNING: package 'libgccjit0' doesn't have a curr version >>>> WARNING: package 'libgccjit0' doesn't have a curr version >>> >>> These messages are probably appearing on all package upload reports. >> >> So what, it's just a warning? This package is indeed not yet available >> as "current" because it's a new package introduced as "test". Maintainers have to recheck if anything they did recently referenced that name in case they screwed up and calm did not warn immediately. Eventually deciding it is possibly due to not having a current release in the current setup.ini after downloading and checking. ;^> > Yeah. > > Unfortunately, because of the way calm works, this warning appears in > the report for any upload, which is perhaps confusing. > > I've configured a suppression for this warning (which is what I usually > do when this situation is intended). Thanks Jon -- Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada This email may be disturbing to some readers as it contains too much technical detail. Reader discretion is advised. [Data in binary units and prefixes, physical quantities in SI.] ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-08-02 20:52 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <162792485893.1067698.6637349784371762085@server2.sourceware.org> 2021-08-02 17:30 ` Attn: gcc maintainer - calm: WARNING: package 'libgccjit0' doesn't have a curr version Brian Inglis 2021-08-02 18:17 ` Achim Gratz 2021-08-02 19:20 ` Jon Turney 2021-08-02 20:52 ` Brian Inglis
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).