* [ITP] python3-pillow
@ 2020-06-26 0:49 Hamish McIntyre-Bhatty
2020-07-04 12:01 ` Hamish McIntyre-Bhatty
2020-07-05 22:21 ` Yaakov Selkowitz
0 siblings, 2 replies; 7+ messages in thread
From: Hamish McIntyre-Bhatty @ 2020-06-26 0:49 UTC (permalink / raw)
To: cygwin-apps
[-- Attachment #1.1.1: Type: text/plain, Size: 473 bytes --]
Hello,
This email signals my intent to package python3-pillow
(https://pypi.org/project/Pillow) for Cygwin. Pillow is a fork of the
Python Imaging Library.
I wish to package this because I have found that PyCrust (built with
wxPython) depends on Pillow and won't run without it installed. As
before, my test packages can be found at
https://www.hamishmb.com/files/cygwin-temp/.
If anyone has feedback I'd appreciate it very much.
Hamish McIntyre-Bhatty
[-- Attachment #1.1.2: 0x87B761FE07F548D6.asc --]
[-- Type: application/pgp-keys, Size: 3235 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ITP] python3-pillow
2020-06-26 0:49 [ITP] python3-pillow Hamish McIntyre-Bhatty
@ 2020-07-04 12:01 ` Hamish McIntyre-Bhatty
2020-07-04 15:37 ` Marco Atzeri
2020-07-05 22:21 ` Yaakov Selkowitz
1 sibling, 1 reply; 7+ messages in thread
From: Hamish McIntyre-Bhatty @ 2020-07-04 12:01 UTC (permalink / raw)
To: cygwin-apps
[-- Attachment #1.1.1: Type: text/plain, Size: 616 bytes --]
On 26/06/2020 01:49, Hamish McIntyre-Bhatty via Cygwin-apps wrote:
> Hello,
>
> This email signals my intent to package python3-pillow
> (https://pypi.org/project/Pillow) for Cygwin. Pillow is a fork of the
> Python Imaging Library.
>
> I wish to package this because I have found that PyCrust (built with
> wxPython) depends on Pillow and won't run without it installed. As
> before, my test packages can be found at
> https://www.hamishmb.com/files/cygwin-temp/.
>
> If anyone has feedback I'd appreciate it very much.
>
> Hamish McIntyre-Bhatty
>
*bump* in case no one has seen this.
Hamish
[-- Attachment #1.1.2: 0x87B761FE07F548D6.asc --]
[-- Type: application/pgp-keys, Size: 3235 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ITP] python3-pillow
2020-07-04 12:01 ` Hamish McIntyre-Bhatty
@ 2020-07-04 15:37 ` Marco Atzeri
0 siblings, 0 replies; 7+ messages in thread
From: Marco Atzeri @ 2020-07-04 15:37 UTC (permalink / raw)
To: cygwin-apps
On 04.07.2020 14:01, Hamish McIntyre-Bhatty via Cygwin-apps wrote:
> On 26/06/2020 01:49, Hamish McIntyre-Bhatty via Cygwin-apps wrote:
>> Hello,
>>
>> This email signals my intent to package python3-pillow
>> (https://pypi.org/project/Pillow) for Cygwin. Pillow is a fork of the
>> Python Imaging Library.
>>
>> I wish to package this because I have found that PyCrust (built with
>> wxPython) depends on Pillow and won't run without it installed. As
>> before, my test packages can be found at
>> https://www.hamishmb.com/files/cygwin-temp/.
>>
>> If anyone has feedback I'd appreciate it very much.
>>
>> Hamish McIntyre-Bhatty
>>
> *bump* in case no one has seen this.
>
> Hamish
>
GTG,
you can upload
Regards
Marco
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ITP] python3-pillow
2020-06-26 0:49 [ITP] python3-pillow Hamish McIntyre-Bhatty
2020-07-04 12:01 ` Hamish McIntyre-Bhatty
@ 2020-07-05 22:21 ` Yaakov Selkowitz
2020-07-06 8:57 ` Hamish McIntyre-Bhatty
1 sibling, 1 reply; 7+ messages in thread
From: Yaakov Selkowitz @ 2020-07-05 22:21 UTC (permalink / raw)
To: cygwin-apps
On Fri, 2020-06-26 at 01:49 +0100, Hamish McIntyre-Bhatty via Cygwin-
apps wrote:
> This email signals my intent to package python3-pillow
> (https://pypi.org/project/Pillow) for Cygwin. Pillow is a fork of the
> Python Imaging Library.
>
> I wish to package this because I have found that PyCrust (built with
> wxPython) depends on Pillow and won't run without it installed. As
> before, my test packages can be found at
> https://www.hamishmb.com/files/cygwin-temp/.
>
> If anyone has feedback I'd appreciate it very much.
1) Source packages are generally named python-*.
2) This should be an ITA for python-imaging instead, which has been
Pillow-based for a long time.
--
Yaakov
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ITP] python3-pillow
2020-07-05 22:21 ` Yaakov Selkowitz
@ 2020-07-06 8:57 ` Hamish McIntyre-Bhatty
2020-07-06 14:19 ` Yaakov Selkowitz
0 siblings, 1 reply; 7+ messages in thread
From: Hamish McIntyre-Bhatty @ 2020-07-06 8:57 UTC (permalink / raw)
To: cygwin-apps
[-- Attachment #1.1.1: Type: text/plain, Size: 1186 bytes --]
On 05/07/2020 23:21, Yaakov Selkowitz wrote:
> On Fri, 2020-06-26 at 01:49 +0100, Hamish McIntyre-Bhatty via Cygwin-
> apps wrote:
>> This email signals my intent to package python3-pillow
>> (https://pypi.org/project/Pillow) for Cygwin. Pillow is a fork of the
>> Python Imaging Library.
>>
>> I wish to package this because I have found that PyCrust (built with
>> wxPython) depends on Pillow and won't run without it installed. As
>> before, my test packages can be found at
>> https://www.hamishmb.com/files/cygwin-temp/.
>>
>> If anyone has feedback I'd appreciate it very much.
> 1) Source packages are generally named python-*.
Yes, but the latest build of Pillow doesn't support Python 2 - I feel
calling it python-pillow would be misleading.
> 2) This should be an ITA for python-imaging instead, which has been
> Pillow-based for a long time.
The Python imaging library was replaced by Pillow as far as I can tell,
and seems to have been unmaintained since 2011. Could you give me a link
to the library you're talking about please?
Either way, wxPython specifically needs Pillow. I can also build the
imaging library if you want though.
Hamish
[-- Attachment #1.1.2: 0x87B761FE07F548D6.asc --]
[-- Type: application/pgp-keys, Size: 3235 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ITP] python3-pillow
2020-07-06 8:57 ` Hamish McIntyre-Bhatty
@ 2020-07-06 14:19 ` Yaakov Selkowitz
2021-01-11 3:59 ` Marco Atzeri
0 siblings, 1 reply; 7+ messages in thread
From: Yaakov Selkowitz @ 2020-07-06 14:19 UTC (permalink / raw)
To: cygwin-apps
On Mon, 2020-07-06 at 09:57 +0100, Hamish McIntyre-Bhatty via Cygwin-
apps wrote:
> On 05/07/2020 23:21, Yaakov Selkowitz wrote:
> > On Fri, 2020-06-26 at 01:49 +0100, Hamish McIntyre-Bhatty via Cygwin-
> > apps wrote:
> > > This email signals my intent to package python3-pillow
> > > (https://pypi.org/project/Pillow) for Cygwin. Pillow is a fork of the
> > > Python Imaging Library.
> > >
> > > I wish to package this because I have found that PyCrust (built with
> > > wxPython) depends on Pillow and won't run without it installed. As
> > > before, my test packages can be found at
> > > https://www.hamishmb.com/files/cygwin-temp/.
> > >
> > > If anyone has feedback I'd appreciate it very much.
> > 1) Source packages are generally named python-*.
> Yes, but the latest build of Pillow doesn't support Python 2 - I feel
> calling it python-pillow would be misleading.
No, this is the naming scheme we've been using for Python packages.
python-foo: sources
pythonXY-foo: binaries for each supported X.Y version of Python
> > 2) This should be an ITA for python-imaging instead, which has been
> > Pillow-based for a long time.
>
> The Python imaging library was replaced by Pillow as far as I can tell,
> and seems to have been unmaintained since 2011. Could you give me a link
> to the library you're talking about please?
As I said, our python-imaging packages have been from Pillow for quite
some time. Technically, at this point they should be named python-pil
or the like, but the package name long predates the PIL namespace being
mandatory (not to mention the Pillow fork in general), but I never
renamed the packages to avoid the complications involved therein.
Either way, "pillow" isn't the right name IMO because users don't
"from Pillow import", they "from PIL import".
--
Yaakov
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [ITP] python3-pillow
2020-07-06 14:19 ` Yaakov Selkowitz
@ 2021-01-11 3:59 ` Marco Atzeri
0 siblings, 0 replies; 7+ messages in thread
From: Marco Atzeri @ 2021-01-11 3:59 UTC (permalink / raw)
To: cygwin-apps
On 06.07.2020 16:19, Yaakov Selkowitz wrote:
> On Mon, 2020-07-06 at 09:57 +0100, Hamish McIntyre-Bhatty via Cygwin-
> apps wrote:
>> On 05/07/2020 23:21, Yaakov Selkowitz wrote:
>>> On Fri, 2020-06-26 at 01:49 +0100, Hamish McIntyre-Bhatty via Cygwin-
>>> apps wrote:
>>> 2) This should be an ITA for python-imaging instead, which has been
>>> Pillow-based for a long time.
>>
>> The Python imaging library was replaced by Pillow as far as I can tell,
>> and seems to have been unmaintained since 2011. Could you give me a link
>> to the library you're talking about please?
>
> As I said, our python-imaging packages have been from Pillow for quite
> some time. Technically, at this point they should be named python-pil
> or the like, but the package name long predates the PIL namespace being
> mandatory (not to mention the Pillow fork in general), but I never
> renamed the packages to avoid the complications involved therein.
> Either way, "pillow" isn't the right name IMO because users don't
> "from Pillow import", they "from PIL import".
>
> --
> Yaakov
for the record, I removed python3-pillow from cygwin-pkg-maint.
better late than never
Regards
Marco
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-01-11 3:59 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-26 0:49 [ITP] python3-pillow Hamish McIntyre-Bhatty
2020-07-04 12:01 ` Hamish McIntyre-Bhatty
2020-07-04 15:37 ` Marco Atzeri
2020-07-05 22:21 ` Yaakov Selkowitz
2020-07-06 8:57 ` Hamish McIntyre-Bhatty
2020-07-06 14:19 ` Yaakov Selkowitz
2021-01-11 3:59 ` Marco Atzeri
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).