* Upload fails with "connection closed" @ 2015-02-24 21:58 Federico Hernandez 2015-02-25 8:41 ` Corinna Vinschen 0 siblings, 1 reply; 10+ messages in thread From: Federico Hernandez @ 2015-02-24 21:58 UTC (permalink / raw) To: cygwin-apps Hi, I am trying to upload the 64bit package for task. I can get into the sftp server. And the upload of the setup.hint file works. But when it comes to the package itself the upload fails with a "connection closed" right at the beginning of the file itself. Any ideas what the problem could be? Thanks, /F ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Upload fails with "connection closed" 2015-02-24 21:58 Upload fails with "connection closed" Federico Hernandez @ 2015-02-25 8:41 ` Corinna Vinschen 2015-02-25 23:44 ` Federico Hernandez 0 siblings, 1 reply; 10+ messages in thread From: Corinna Vinschen @ 2015-02-25 8:41 UTC (permalink / raw) To: cygwin-apps [-- Attachment #1: Type: text/plain, Size: 777 bytes --] Hi Federico, On Feb 24 22:58, Federico Hernandez wrote: > Hi, > > I am trying to upload the 64bit package for task. I can get into the > sftp server. And the upload of the setup.hint file works. > > But when it comes to the package itself the upload fails with a > "connection closed" right at the beginning of the file itself. > > Any ideas what the problem could be? Not really, no. In your upload dir I saw a tmp file of size 0, task-2.4.1-1-src.tar.xz.SftpXFR.53401 from your upload tries. I removed it. Can you run sftp with -oLogLevel=DEBUG3? This might give a clue what happens. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Maintainer cygwin AT cygwin DOT com Red Hat [-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Upload fails with "connection closed" 2015-02-25 8:41 ` Corinna Vinschen @ 2015-02-25 23:44 ` Federico Hernandez 2015-02-26 10:38 ` Corinna Vinschen 0 siblings, 1 reply; 10+ messages in thread From: Federico Hernandez @ 2015-02-25 23:44 UTC (permalink / raw) To: cygwin-apps Here it comes... put task-2.4.1-1.tar.xz Uploading task-2.4.1-1.tar.xz to /x86_64/release/task-2.4.1-1.tar.xz task-2.4.1-1.tar.xz 0% 0 0.0KB/s --:-- ETAdebug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0 debug2: channel 0: rcvd eow debug2: channel 0: close_read debug2: channel 0: input open -> closed debug2: channel 0: rcvd eof debug2: channel 0: output open -> drain debug2: channel 0: obuf empty debug2: channel 0: close_write debug2: channel 0: output drain -> closed debug2: channel 0: rcvd close debug3: channel 0: will not send data after close debug2: channel 0: almost dead debug2: channel 0: gc: notify user debug2: channel 0: gc: user detached debug2: channel 0: send close debug2: channel 0: is dead debug2: channel 0: garbage collecting debug1: channel 0: free: client-session, nchannels 1 debug3: channel 0: status: The following connections are open: #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1) debug1: fd 0 clearing O_NONBLOCK debug3: fd 1 is not O_NONBLOCK Transferred: sent 36752, received 4384 bytes, in 62.9 seconds Bytes per second: sent 583.9, received 69.7 debug1: Exit status 1 Connection closed On Wed, Feb 25, 2015 at 9:41 AM, Corinna Vinschen <corinna-cygwin@cygwin.com> wrote: > Hi Federico, > > On Feb 24 22:58, Federico Hernandez wrote: >> Hi, >> >> I am trying to upload the 64bit package for task. I can get into the >> sftp server. And the upload of the setup.hint file works. >> >> But when it comes to the package itself the upload fails with a >> "connection closed" right at the beginning of the file itself. >> >> Any ideas what the problem could be? > > Not really, no. In your upload dir I saw a tmp file of size 0, > task-2.4.1-1-src.tar.xz.SftpXFR.53401 from your upload tries. > I removed it. > > Can you run sftp with -oLogLevel=DEBUG3? This might give a clue what > happens. > > > Corinna > > -- > Corinna Vinschen Please, send mails regarding Cygwin to > Cygwin Maintainer cygwin AT cygwin DOT com > Red Hat ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Upload fails with "connection closed" 2015-02-25 23:44 ` Federico Hernandez @ 2015-02-26 10:38 ` Corinna Vinschen 2015-02-27 8:47 ` Corinna Vinschen 0 siblings, 1 reply; 10+ messages in thread From: Corinna Vinschen @ 2015-02-26 10:38 UTC (permalink / raw) To: cygwin-apps [-- Attachment #1: Type: text/plain, Size: 1437 bytes --] Hi Federico, On Feb 26 00:44, Federico Hernandez wrote: > Here it comes... > > put task-2.4.1-1.tar.xz > Uploading task-2.4.1-1.tar.xz to /x86_64/release/task-2.4.1-1.tar.xz > task-2.4.1-1.tar.xz > 0% 0 > 0.0KB/s --:-- ETAdebug1: client_input_channel_req: channel 0 rtype > exit-status reply 0 > debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0 > debug2: channel 0: rcvd eow ^^^^^^^^ Means: Write Failed I can reproduce this. I tried to upload to my staging dir as well as to your staging dir. I can't upload normally either. Given the latest uploads, it was no problem two days ago at least. This only affects the Cygwin package upload, which uses a perl module NET::SFTP::SftpServer. If I use a "normal" sftp server, uploading works. The directory permissions are looking perfectly normal, too. I can upload short files but nothing bigger than about 12K. In the meantime I set up the same perl stuff on my local machine and even there I can reproduce this problem. I'm trying to debug this, but I'm not a perl wizard at all. Is somebody available for help? Via IRC, perhaps (freenode #cygwin-developers)? Thanks, Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Maintainer cygwin AT cygwin DOT com Red Hat [-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Upload fails with "connection closed" 2015-02-26 10:38 ` Corinna Vinschen @ 2015-02-27 8:47 ` Corinna Vinschen 2015-02-27 11:59 ` Federico Hernandez 0 siblings, 1 reply; 10+ messages in thread From: Corinna Vinschen @ 2015-02-27 8:47 UTC (permalink / raw) To: cygwin-apps [-- Attachment #1: Type: text/plain, Size: 1900 bytes --] Hi Federico, On Feb 26 11:38, Corinna Vinschen wrote: > On Feb 26 00:44, Federico Hernandez wrote: > > Here it comes... > > > > put task-2.4.1-1.tar.xz > > Uploading task-2.4.1-1.tar.xz to /x86_64/release/task-2.4.1-1.tar.xz > > task-2.4.1-1.tar.xz > > 0% 0 > > 0.0KB/s --:-- ETAdebug1: client_input_channel_req: channel 0 rtype > > exit-status reply 0 > > debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0 > > debug2: channel 0: rcvd eow > ^^^^^^^^ > Means: Write Failed > > I can reproduce this. I tried to upload to my staging dir as well as to > your staging dir. I can't upload normally either. Given the latest > uploads, it was no problem two days ago at least. > > This only affects the Cygwin package upload, which uses a perl module > NET::SFTP::SftpServer. If I use a "normal" sftp server, uploading > works. > > The directory permissions are looking perfectly normal, too. I can > upload short files but nothing bigger than about 12K. > > In the meantime I set up the same perl stuff on my local machine and > even there I can reproduce this problem. I'm trying to debug this, but > I'm not a perl wizard at all. > > Is somebody available for help? Via IRC, perhaps (freenode > #cygwin-developers)? I haven't fond a solution to this problem yet. Given that most people don't seem to be affected, it might have something to do with a setting on the client side, bot for the life of me I can figure out what the difference might be. For the time being, can you just provide URLs to the 32 and 64 bit packages and we'll upload them using other means. Sorry, Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Maintainer cygwin AT cygwin DOT com Red Hat [-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Upload fails with "connection closed" 2015-02-27 8:47 ` Corinna Vinschen @ 2015-02-27 11:59 ` Federico Hernandez 2015-02-28 7:26 ` Marco Atzeri 0 siblings, 1 reply; 10+ messages in thread From: Federico Hernandez @ 2015-02-27 11:59 UTC (permalink / raw) To: cygwin-apps Hi again. No problem. I will prepare some URLs and mail you them this evening. I will also try alternativ clients. Thanks for your efforts. /F On Fri, Feb 27, 2015 at 9:47 AM, Corinna Vinschen <corinna-cygwin@cygwin.com> wrote: > Hi Federico, > > On Feb 26 11:38, Corinna Vinschen wrote: >> On Feb 26 00:44, Federico Hernandez wrote: >> > Here it comes... >> > >> > put task-2.4.1-1.tar.xz >> > Uploading task-2.4.1-1.tar.xz to /x86_64/release/task-2.4.1-1.tar.xz >> > task-2.4.1-1.tar.xz >> > 0% 0 >> > 0.0KB/s --:-- ETAdebug1: client_input_channel_req: channel 0 rtype >> > exit-status reply 0 >> > debug1: client_input_channel_req: channel 0 rtype eow@openssh.com reply 0 >> > debug2: channel 0: rcvd eow >> ^^^^^^^^ >> Means: Write Failed >> >> I can reproduce this. I tried to upload to my staging dir as well as to >> your staging dir. I can't upload normally either. Given the latest >> uploads, it was no problem two days ago at least. >> >> This only affects the Cygwin package upload, which uses a perl module >> NET::SFTP::SftpServer. If I use a "normal" sftp server, uploading >> works. >> >> The directory permissions are looking perfectly normal, too. I can >> upload short files but nothing bigger than about 12K. >> >> In the meantime I set up the same perl stuff on my local machine and >> even there I can reproduce this problem. I'm trying to debug this, but >> I'm not a perl wizard at all. >> >> Is somebody available for help? Via IRC, perhaps (freenode >> #cygwin-developers)? > > I haven't fond a solution to this problem yet. Given that most people > don't seem to be affected, it might have something to do with a setting > on the client side, bot for the life of me I can figure out what the > difference might be. > > For the time being, can you just provide URLs to the 32 and 64 bit > packages and we'll upload them using other means. > > > Sorry, > Corinna > > -- > Corinna Vinschen Please, send mails regarding Cygwin to > Cygwin Maintainer cygwin AT cygwin DOT com > Red Hat ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Upload fails with "connection closed" 2015-02-27 11:59 ` Federico Hernandez @ 2015-02-28 7:26 ` Marco Atzeri 2015-02-28 13:40 ` Federico Hernandez 0 siblings, 1 reply; 10+ messages in thread From: Marco Atzeri @ 2015-02-28 7:26 UTC (permalink / raw) To: cygwin-apps On 2/27/2015 12:59 PM, Federico Hernandez wrote: > Hi again. > > No problem. I will prepare some URLs and mail you them this evening. I > will also try alternativ clients. > > Thanks for your efforts. > > /F > lftp works fine for me. Regards Marco ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Upload fails with "connection closed" 2015-02-28 7:26 ` Marco Atzeri @ 2015-02-28 13:40 ` Federico Hernandez 2015-02-28 14:04 ` Corinna Vinschen 0 siblings, 1 reply; 10+ messages in thread From: Federico Hernandez @ 2015-02-28 13:40 UTC (permalink / raw) To: cygwin-apps Yes, that worked as well for me. THX for the hint. /F On Sat, Feb 28, 2015 at 8:26 AM, Marco Atzeri <marco.atzeri@gmail.com> wrote: > On 2/27/2015 12:59 PM, Federico Hernandez wrote: >> >> Hi again. >> >> No problem. I will prepare some URLs and mail you them this evening. I >> will also try alternativ clients. >> >> Thanks for your efforts. >> >> /F >> > > lftp works fine for me. > > Regards > Marco > > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Upload fails with "connection closed" 2015-02-28 13:40 ` Federico Hernandez @ 2015-02-28 14:04 ` Corinna Vinschen 2015-02-28 14:55 ` Corinna Vinschen 0 siblings, 1 reply; 10+ messages in thread From: Corinna Vinschen @ 2015-02-28 14:04 UTC (permalink / raw) To: cygwin-apps [-- Attachment #1: Type: text/plain, Size: 305 bytes --] On Feb 28 14:39, Federico Hernandez wrote: > Yes, that worked as well for me. THX for the hint. It did? Lucky guy. It didn't for me :( Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Maintainer cygwin AT cygwin DOT com Red Hat [-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Upload fails with "connection closed" 2015-02-28 14:04 ` Corinna Vinschen @ 2015-02-28 14:55 ` Corinna Vinschen 0 siblings, 0 replies; 10+ messages in thread From: Corinna Vinschen @ 2015-02-28 14:55 UTC (permalink / raw) To: cygwin-apps [-- Attachment #1: Type: text/plain, Size: 497 bytes --] On Feb 28 15:04, Corinna Vinschen wrote: > On Feb 28 14:39, Federico Hernandez wrote: > > Yes, that worked as well for me. THX for the hint. > > It did? Lucky guy. It didn't for me :( Never mind. I tried again and for some reason it suddenly works for me with lftp, too. It still doesn't work with sftp, though. Weird. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Maintainer cygwin AT cygwin DOT com Red Hat [-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2015-02-28 14:55 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-02-24 21:58 Upload fails with "connection closed" Federico Hernandez 2015-02-25 8:41 ` Corinna Vinschen 2015-02-25 23:44 ` Federico Hernandez 2015-02-26 10:38 ` Corinna Vinschen 2015-02-27 8:47 ` Corinna Vinschen 2015-02-27 11:59 ` Federico Hernandez 2015-02-28 7:26 ` Marco Atzeri 2015-02-28 13:40 ` Federico Hernandez 2015-02-28 14:04 ` Corinna Vinschen 2015-02-28 14:55 ` Corinna Vinschen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).