After installing nc (netcat), nc.exe is not found

After installing nc (netcat), nc.exe is not found

[Mark Hansen]

I've just updated to the latest Cygwin 64-bit installation on my Windows 7 PC. Included
in this update was the package for nc (nc: A simple but powerful network tool) version 1.107-4

After downloading and installing, which all seemed to go fine, the man page for nc is there,
but nc.exe is not.

I included the following (netcat-related) packages:
- nc, 1.107-4
- nc6, 1.0-1
- nc6-debuginfo, 1.0-1

Is there something special I need to do to get nc.exe installed?

Thanks,


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Heavenly Avenger]

I have these versions, and nc is here happy and playful.

It is possible you attempted an upgrade while cygwin programs were 
running? Cygwin services also count. This is due a limitation on windows 
which locks files when they are in use, so cygwin updates can't replace 
the files and end up failing.

You may ensure everything is closed and services stopped, re-run 
setup-x86_64.exe, selecting the 'nc' package and switching it to 
"Reinstall". Then let the setup do its things.

If the setup is hanging, or have hung up and you had to force-close it 
the last install attempt you did, this is a strong sign that not just 
nc, but several other packages that have been attempted to upgrade may 
be compromised. To ensure that is not the case, a good

cygcheck -c

should help.

The package nc-1.10-4.tar.bz2 has 'usr/bin/nc.exe', which is the file 
you claim missing.

Hope this helps! :)


On 7/11/2018 2:10 PM, Mark Hansen wrote:
> I've just updated to the latest Cygwin 64-bit installation on my 
> Windows 7 PC. Included
> in this update was the package for nc (nc: A simple but powerful 
> network tool) version 1.107-4
>
> After downloading and installing, which all seemed to go fine, the man 
> page for nc is there,
> but nc.exe is not.
>
> I included the following (netcat-related) packages:
> - nc, 1.107-4
> - nc6, 1.0-1
> - nc6-debuginfo, 1.0-1
>
> Is there something special I need to do to get nc.exe installed?
>
> Thanks,
>
>
> -- 
> Problem reports:       http://cygwin.com/problems.html
> FAQ:                   http://cygwin.com/faq/
> Documentation:         http://cygwin.com/docs.html
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>
>


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Mark Hansen]

On 7/11/2018 10:34 AM, Heavenly Avenger wrote:
> I have these versions, and nc is here happy and playful.
> 
> It is possible you attempted an upgrade while cygwin programs were
> running? Cygwin services also count. This is due a limitation on windows
> which locks files when they are in use, so cygwin updates can't replace
> the files and end up failing.
> 
> You may ensure everything is closed and services stopped, re-run
> setup-x86_64.exe, selecting the 'nc' package and switching it to
> "Reinstall". Then let the setup do its things.
> 
> If the setup is hanging, or have hung up and you had to force-close it
> the last install attempt you did, this is a strong sign that not just
> nc, but several other packages that have been attempted to upgrade may
> be compromised. To ensure that is not the case, a good
> 
> cygcheck -c
> 
> should help.
> 
> The package nc-1.10-4.tar.bz2 has 'usr/bin/nc.exe', which is the file
> you claim missing.
> 
> Hope this helps! :)
> 

Thanks for your help. I have notes that show what all I need to shut down when doing the
install. I caught all them (Cygwin SSHD, Cygwin cygserver, the X Server, and anything running
cygwin shells, etc.) - I think that's everything.

When I run cygcheck -c, it shows Incomplete on the two packages (nc and nc6) so they definitely
had problems, and appear to be the only ones which did.

I see that the .bz2 file is in my downloads area (I download to local without install, and then
install from local).

I tried running bunzip2 on that file and then extracting it using tar. The bunzip2 completed
quickly but the tar command took a long time (I'm not sure what it was doing during this time).

I'll try shutting everything down and doing a reinstall on the netcat stuff.

Thanks,

> 
> On 7/11/2018 2:10 PM, Mark Hansen wrote:
>> I've just updated to the latest Cygwin 64-bit installation on my 
>> Windows 7 PC. Included
>> in this update was the package for nc (nc: A simple but powerful 
>> network tool) version 1.107-4
>>
>> After downloading and installing, which all seemed to go fine, the man 
>> page for nc is there,
>> but nc.exe is not.
>>
>> I included the following (netcat-related) packages:
>> - nc, 1.107-4
>> - nc6, 1.0-1
>> - nc6-debuginfo, 1.0-1
>>
>> Is there something special I need to do to get nc.exe installed?
>>
>> Thanks,
>>
>>
>> -- 
>> Problem reports:       http://cygwin.com/problems.html
>> FAQ:                   http://cygwin.com/faq/
>> Documentation:         http://cygwin.com/docs.html
>> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>>
>>
> 
> 


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Mark Hansen]

On 7/11/2018 10:34 AM, Heavenly Avenger wrote:
> I have these versions, and nc is here happy and playful.
> 
> It is possible you attempted an upgrade while cygwin programs were
> running? Cygwin services also count. This is due a limitation on windows
> which locks files when they are in use, so cygwin updates can't replace
> the files and end up failing.
> 
> You may ensure everything is closed and services stopped, re-run
> setup-x86_64.exe, selecting the 'nc' package and switching it to
> "Reinstall". Then let the setup do its things.
> 
> If the setup is hanging, or have hung up and you had to force-close it
> the last install attempt you did, this is a strong sign that not just
> nc, but several other packages that have been attempted to upgrade may
> be compromised. To ensure that is not the case, a good
> 
> cygcheck -c
> 
> should help.
> 
> The package nc-1.10-4.tar.bz2 has 'usr/bin/nc.exe', which is the file
> you claim missing.
> 
> Hope this helps! :)
> 

Thanks for your help. I have notes that show what all I need to shut down when doing the
install. I caught all them (Cygwin SSHD, Cygwin cygserver, the X Server, and anything running
cygwin shells, etc.) - I think that's everything.

When I run cygcheck -c, it shows Incomplete on the two packages (nc and nc6) so they definitely
had problems, and appear to be the only ones which did.

I see that the .bz2 file is in my downloads area (I download to local without install, and then
install from local).

I tried running bunzip2 on that file and then extracting it using tar. The bunzip2 completed
quickly but the tar command took a long time (I'm not sure what it was doing during this time).

I'll try shutting everything down and doing a reinstall on the netcat stuff.

Thanks,

> 
> On 7/11/2018 2:10 PM, Mark Hansen wrote:
>> I've just updated to the latest Cygwin 64-bit installation on my 
>> Windows 7 PC. Included
>> in this update was the package for nc (nc: A simple but powerful 
>> network tool) version 1.107-4
>>
>> After downloading and installing, which all seemed to go fine, the man 
>> page for nc is there,
>> but nc.exe is not.
>>
>> I included the following (netcat-related) packages:
>> - nc, 1.107-4
>> - nc6, 1.0-1
>> - nc6-debuginfo, 1.0-1
>>
>> Is there something special I need to do to get nc.exe installed?
>>
>> Thanks,
>>
>>
>> -- 
>> Problem reports:       http://cygwin.com/problems.html
>> FAQ:                   http://cygwin.com/faq/
>> Documentation:         http://cygwin.com/docs.html
>> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>>
>>
> 
> 



--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Mark Hansen]

On 7/11/2018 12:34 PM, Mark Hansen wrote:
> On 7/11/2018 10:34 AM, Heavenly Avenger wrote:
>> I have these versions, and nc is here happy and playful.
>> 
>> It is possible you attempted an upgrade while cygwin programs were
>> running? Cygwin services also count. This is due a limitation on windows
>> which locks files when they are in use, so cygwin updates can't replace
>> the files and end up failing.
>> 
>> You may ensure everything is closed and services stopped, re-run
>> setup-x86_64.exe, selecting the 'nc' package and switching it to
>> "Reinstall". Then let the setup do its things.
>> 
>> If the setup is hanging, or have hung up and you had to force-close it
>> the last install attempt you did, this is a strong sign that not just
>> nc, but several other packages that have been attempted to upgrade may
>> be compromised. To ensure that is not the case, a good
>> 
>> cygcheck -c
>> 
>> should help.
>> 
>> The package nc-1.10-4.tar.bz2 has 'usr/bin/nc.exe', which is the file
>> you claim missing.
>> 
>> Hope this helps! :)
>> 
> 
> Thanks for your help. I have notes that show what all I need to shut down when doing the
> install. I caught all them (Cygwin SSHD, Cygwin cygserver, the X Server, and anything running
> cygwin shells, etc.) - I think that's everything.
> 
> When I run cygcheck -c, it shows Incomplete on the two packages (nc and nc6) so they definitely
> had problems, and appear to be the only ones which did.
> 
> I see that the .bz2 file is in my downloads area (I download to local without install, and then
> install from local).
> 
> I tried running bunzip2 on that file and then extracting it using tar. The bunzip2 completed
> quickly but the tar command took a long time (I'm not sure what it was doing during this time).
> 
> I'll try shutting everything down and doing a reinstall on the netcat stuff.
> 
> Thanks,

There is an error happening during the installation. I get a pop-up with the following:

   Can't open x86_64/release/libfm-qt/libfm-qt5-common/libfm-qt5-common-0.11.1-1.tar.xz for reading: Unknown filename

This appears to be what is keeping nc and nc6 from installing properly.

There are lots of .xz files in the release, so perhaps the problem is the file name is too long?

Is there some way I can work around this?

Thanks,

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Mark Hansen]

On 7/11/2018 12:34 PM, Mark Hansen wrote:
> On 7/11/2018 10:34 AM, Heavenly Avenger wrote:
>> I have these versions, and nc is here happy and playful.
>> 
>> It is possible you attempted an upgrade while cygwin programs were
>> running? Cygwin services also count. This is due a limitation on windows
>> which locks files when they are in use, so cygwin updates can't replace
>> the files and end up failing.
>> 
>> You may ensure everything is closed and services stopped, re-run
>> setup-x86_64.exe, selecting the 'nc' package and switching it to
>> "Reinstall". Then let the setup do its things.
>> 
>> If the setup is hanging, or have hung up and you had to force-close it
>> the last install attempt you did, this is a strong sign that not just
>> nc, but several other packages that have been attempted to upgrade may
>> be compromised. To ensure that is not the case, a good
>> 
>> cygcheck -c
>> 
>> should help.
>> 
>> The package nc-1.10-4.tar.bz2 has 'usr/bin/nc.exe', which is the file
>> you claim missing.
>> 
>> Hope this helps! :)
>> 
> 
> Thanks for your help. I have notes that show what all I need to shut down when doing the
> install. I caught all them (Cygwin SSHD, Cygwin cygserver, the X Server, and anything running
> cygwin shells, etc.) - I think that's everything.
> 
> When I run cygcheck -c, it shows Incomplete on the two packages (nc and nc6) so they definitely
> had problems, and appear to be the only ones which did.
> 
> I see that the .bz2 file is in my downloads area (I download to local without install, and then
> install from local).
> 
> I tried running bunzip2 on that file and then extracting it using tar. The bunzip2 completed
> quickly but the tar command took a long time (I'm not sure what it was doing during this time).
> 
> I'll try shutting everything down and doing a reinstall on the netcat stuff.
> 
> Thanks,

There is an error happening during the installation. I get a pop-up with the following:

   Can't open x86_64/release/libfm-qt/libfm-qt5-common/libfm-qt5-common-0.11.1-1.tar.xz for reading: Unknown filename

This appears to be what is keeping nc and nc6 from installing properly.

There are lots of .xz files in the release, so perhaps the problem is the file name is too long?

Is there some way I can work around this?

Thanks,


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Heavenly Avenger]

Not sure it would help, but I keep my cygwin installation under 
c:\cygwin and I set up the packages directory to c:\cygwin\packages. 
This ensures short paths and I can 'ls /packages' to fiddle with them.

I wouldn't advise you to just go ahead and unpack the packages. Cygwin 
setup runs some shady things when it installs packages (aka rebaseall) 
in order to settle usable memory for the installed tools (another 
unfortunate limitation of cygwin due to windows design). I see that you 
are relying on cygsetup so that shouldn't be the problem, just making sure.

You can set up this packages directory when you start cygwin setup. It 
is one of the first questions it makes. I believe it would be wise to 
manually move that packages directory to where you want it before so 
that cygwin just finds whatever it installed still in place after you 
specify the new path.

This might solve the long path, although I don't think this should be 
the problem... Cygwin supports quite long paths as far as I know, or 
believe. :)

I don't think the '.xz' extension has anything to do with the issue, it 
is just the compression protocol the files follow.

On another topic, if you just chose to reinstall the "incomplete" 
packages only, why the hell did setup want to fiddle with that other 
package you named (libfm-...)?.. Perhaps you need first to switch the 
"latest" to "keep" (in the packages selection phase of setup) so that it 
does not try to upgrade everything else and just reinstalls the packages 
you specified. Once nc and the incomplete packages works you may give 
the full upgrade a try. You can just hit 'back' once it completes 
installation and do the upgrade steps (instead of closing and re-opening 
the cygwin setup application).

Well, I hope this helps! :)

On 7/11/2018 4:45 PM, Mark Hansen wrote:
> On 7/11/2018 12:34 PM, Mark Hansen wrote:
>> On 7/11/2018 10:34 AM, Heavenly Avenger wrote:
>>> I have these versions, and nc is here happy and playful.
>>>
>>> It is possible you attempted an upgrade while cygwin programs were
>>> running? Cygwin services also count. This is due a limitation on 
>>> windows
>>> which locks files when they are in use, so cygwin updates can't replace
>>> the files and end up failing.
>>>
>>> You may ensure everything is closed and services stopped, re-run
>>> setup-x86_64.exe, selecting the 'nc' package and switching it to
>>> "Reinstall". Then let the setup do its things.
>>>
>>> If the setup is hanging, or have hung up and you had to force-close it
>>> the last install attempt you did, this is a strong sign that not just
>>> nc, but several other packages that have been attempted to upgrade may
>>> be compromised. To ensure that is not the case, a good
>>>
>>> cygcheck -c
>>>
>>> should help.
>>>
>>> The package nc-1.10-4.tar.bz2 has 'usr/bin/nc.exe', which is the file
>>> you claim missing.
>>>
>>> Hope this helps! :)
>>>
>>
>> Thanks for your help. I have notes that show what all I need to shut 
>> down when doing the
>> install. I caught all them (Cygwin SSHD, Cygwin cygserver, the X 
>> Server, and anything running
>> cygwin shells, etc.) - I think that's everything.
>>
>> When I run cygcheck -c, it shows Incomplete on the two packages (nc 
>> and nc6) so they definitely
>> had problems, and appear to be the only ones which did.
>>
>> I see that the .bz2 file is in my downloads area (I download to local 
>> without install, and then
>> install from local).
>>
>> I tried running bunzip2 on that file and then extracting it using 
>> tar. The bunzip2 completed
>> quickly but the tar command took a long time (I'm not sure what it 
>> was doing during this time).
>>
>> I'll try shutting everything down and doing a reinstall on the netcat 
>> stuff.
>>
>> Thanks,
>
> There is an error happening during the installation. I get a pop-up 
> with the following:
>
>   Can't open 
> x86_64/release/libfm-qt/libfm-qt5-common/libfm-qt5-common-0.11.1-1.tar.xz 
> for reading: Unknown filename
>
> This appears to be what is keeping nc and nc6 from installing properly.
>
> There are lots of .xz files in the release, so perhaps the problem is 
> the file name is too long?
>
> Is there some way I can work around this?
>
> Thanks,
>
> -- 
> Problem reports:       http://cygwin.com/problems.html
> FAQ:                   http://cygwin.com/faq/
> Documentation:         http://cygwin.com/docs.html
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>
>


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Andrey Repin]

Greetings, Mark Hansen!

> I've just updated to the latest Cygwin 64-bit installation on my Windows 7 PC. Included
> in this update was the package for nc (nc: A simple but powerful network tool) version 1.107-4

> After downloading and installing, which all seemed to go fine, the man page for nc is there,
> but nc.exe is not.

> I included the following (netcat-related) packages:
> - nc, 1.107-4
> - nc6, 1.0-1
> - nc6-debuginfo, 1.0-1

> Is there something special I need to do to get nc.exe installed?

Check your antivirus quarantine area.


-- 
With best regards,
Andrey Repin
Wednesday, July 11, 2018 22:40:36

Sorry for my terrible english...


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Gary Johnson]

On 2018-07-11, Andrey Repin wrote:
> Greetings, Mark Hansen!
> 
> > I've just updated to the latest Cygwin 64-bit installation on my Windows 7 PC. Included
> > in this update was the package for nc (nc: A simple but powerful network tool) version 1.107-4
> 
> > After downloading and installing, which all seemed to go fine, the man page for nc is there,
> > but nc.exe is not.
> 
> > I included the following (netcat-related) packages:
> > - nc, 1.107-4
> > - nc6, 1.0-1
> > - nc6-debuginfo, 1.0-1
> 
> > Is there something special I need to do to get nc.exe installed?
> 
> Check your antivirus quarantine area.

Yep.  If you're in a corporate environment, IT may have a program
running to check for the installation of unwanted and suspicious
files.  Corporate IT departments do not like Netcat.

Regards,
Gary


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Mark Hansen]

On 7/11/2018 12:41 PM, Andrey Repin wrote:
> Greetings, Mark Hansen!
> 
>> I've just updated to the latest Cygwin 64-bit installation on my Windows 7 PC. Included
>> in this update was the package for nc (nc: A simple but powerful network tool) version 1.107-4
> 
>> After downloading and installing, which all seemed to go fine, the man page for nc is there,
>> but nc.exe is not.
> 
>> I included the following (netcat-related) packages:
>> - nc, 1.107-4
>> - nc6, 1.0-1
>> - nc6-debuginfo, 1.0-1
> 
>> Is there something special I need to do to get nc.exe installed?
> 
> Check your antivirus quarantine area.
> 
> 

Well, that's certainly one problem. Both nc.exe and nc6.exe were trapped by the corporate virus checker.
The software allowed me to "restore" it, but when I try to run it I get "Permission Denied".

However, after a few minutes, it's gone again. I'm guessing the virus checker software is doing it.
Unfortunately, it looks like it won't let me create an exception for these executables, so I don't
have any way to stop it from deleting them :(

... and I know better than to ask my corporate IT folks to make an exception for me :(



--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Mark Hansen]

On 7/11/2018 12:41 PM, Andrey Repin wrote:
> Greetings, Mark Hansen!
> 
>> I've just updated to the latest Cygwin 64-bit installation on my Windows 7 PC. Included
>> in this update was the package for nc (nc: A simple but powerful network tool) version 1.107-4
> 
>> After downloading and installing, which all seemed to go fine, the man page for nc is there,
>> but nc.exe is not.
> 
>> I included the following (netcat-related) packages:
>> - nc, 1.107-4
>> - nc6, 1.0-1
>> - nc6-debuginfo, 1.0-1
> 
>> Is there something special I need to do to get nc.exe installed?
> 
> Check your antivirus quarantine area.
> 
> 

Well, that's certainly one problem. Both nc.exe and nc6.exe were trapped by the corporate virus checker.
The software allowed me to "restore" it, but when I try to run it I get "Permission Denied".

However, after a few minutes, it's gone again. I'm guessing the virus checker software is doing it.
Unfortunately, it looks like it won't let me create an exception for these executables, so I don't
have any way to stop it from deleting them :(

... and I know better than to ask my corporate IT folks to make an exception for me :(




--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Gary Johnson]

On 2018-07-11, Mark Hansen wrote:
> On 7/11/2018 12:41 PM, Andrey Repin wrote:
> >Greetings, Mark Hansen!
> >
> >>I've just updated to the latest Cygwin 64-bit installation on my Windows 7 PC. Included
> >>in this update was the package for nc (nc: A simple but powerful network tool) version 1.107-4
> >
> >>After downloading and installing, which all seemed to go fine, the man page for nc is there,
> >>but nc.exe is not.
> >
> >>I included the following (netcat-related) packages:
> >>- nc, 1.107-4
> >>- nc6, 1.0-1
> >>- nc6-debuginfo, 1.0-1
> >
> >>Is there something special I need to do to get nc.exe installed?
> >
> >Check your antivirus quarantine area.
> >
> >
> 
> Well, that's certainly one problem. Both nc.exe and nc6.exe were trapped by the corporate virus checker.
> The software allowed me to "restore" it, but when I try to run it I get "Permission Denied".
> 
> However, after a few minutes, it's gone again. I'm guessing the virus checker software is doing it.
> Unfortunately, it looks like it won't let me create an exception for these executables, so I don't
> have any way to stop it from deleting them :(
> 
> ... and I know better than to ask my corporate IT folks to make an exception for me :(

I had this problem at another company, but that was something like
ten years ago.  I think I solved it by either renaming nc.exe to
something else, compiling my own Netcat, or using Socat, but I don't
remember which approach actually worked.

And of course, depending on the company and the IT department, you
may want to consider whether using the program in spite of their
efforts to prevent you from doing so is worth the risk of
termination.

Regards,
Gary


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Brian Inglis]

On 2018-07-11 14:10, Mark Hansen wrote:
> Well, that's certainly one problem. Both nc.exe and nc6.exe were trapped by the
> corporate virus checker.
> The software allowed me to "restore" it, but when I try to run it I get
> "Permission Denied".
> However, after a few minutes, it's gone again. I'm guessing the virus checker
> software is doing it.
> Unfortunately, it looks like it won't let me create an exception for these
> executables, so I don't
> have any way to stop it from deleting them :(
> ... and I know better than to ask my corporate IT folks to make an exception for
> me :(

Perhaps you could use other packages to get your work done, or talk to your boss
to request that desktop security bypass their file blocker customizations which
stop you doing your work.

-- 
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Christian Franke]

Brian Inglis wrote:
> On 2018-07-11 14:10, Mark Hansen wrote:
>> ... and I know better than to ask my corporate IT folks to make an exception for
>> me :(
> Perhaps you could use other packages to get your work done, ...
>

Busybox provides a tiny version of nc:

$ busybox nc
BusyBox v1.23.2 (2015-07-05 18:51:40 CEST) multi-call binary.

Usage: nc [OPTIONS] HOST PORT  - connect
nc [OPTIONS] -l -p PORT [HOST] [PORT]  - listen

         -e PROG Run PROG after connect (must be last)
         -l      Listen mode, for inbound connects
         -lk     With -e, provides persistent server
         -p PORT Local port
         -s ADDR Local address
         -w SEC  Timeout for connects and final net reads
         -i SEC  Delay interval for lines sent
         -n      Don't do DNS resolution
         -u      UDP mode
         -v      Verbose
         -o FILE Hex dump traffic
         -z      Zero-I/O mode (scanning)

-- 
Christian


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: After installing nc (netcat), nc.exe is not found

[Erik Soderquist]

On Wed, Jul 11, 2018 at 4:10 PM, Mark Hansen wrote:
> Unfortunately, it looks like it won't let me create an exception for these executables, so I don't
> have any way to stop it from deleting them :(
>
> ... and I know better than to ask my corporate IT folks to make an exception for me :(

If you have a valid business case for having and using netcat, should
be no problem to get an exception.  I do, and did without issue after
explaining the business case to my It department.  (if fact, they gave
me admin to configuring the antivirus on my machine rather than just
the netcat exception).

If you don't have a business case for having netcat on your work
machine, I'd highly recommend removing the install packages too, as 'a
fun toy' is not a good reason to get fired.

-- Erik

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple