falled compilations

falled compilations

[juan carlos Rebate]

first say I am new to this list, second discupas I ask for my bad
English writing

I have been programming for windows since 2004, now I am forced to
compile certain Linux applications on Windows, the problem is that I
receive errors that in theory should not.
in the three applications receive the same error

error cc either not exit or no work,
but this is not true, when I call to gcc works correctly, todod
tutorials tell me that do the following ./configure --cc=gcc or
./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3

course this command is not valid as regards gcc gcc 3 but includes
cygwin 5, of course is not sufficient to change the 3 by 5


How you could resolve this?

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: falled compilations

[René Berber]

On 10/18/2016 7:04 PM, juan carlos Rebate wrote:

[snip]
> in the three applications receive the same error
> 
> error cc either not exit or no work,

First check that gcc is in the path, something like this (in mintty):

$ which gcc
/usr/bin/gcc

$ which cc
/usr/bin/cc

> but this is not true, when I call to gcc works correctly, todod
> tutorials tell me that do the following ./configure --cc=gcc or
> ./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3

Wrong, useless, tutorials.  What you really do, if needed (and it really
shouldn't be needed, see above).

./configure CC=gcc

In fact you can learn that by simply running:

./configure --help

Reagards.
-- 
René Berber



--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: falled compilations

[juan carlos Rebate]

2016-10-19 2:31 GMT+02:00 René Berber <rene.berber@gmail.com>:
> On 10/18/2016 7:04 PM, juan carlos Rebate wrote:
>
> [snip]
>> in the three applications receive the same error
>>
>> error cc either not exit or no work,
>
> First check that gcc is in the path, something like this (in mintty):
>
> $ which gcc
> /usr/bin/gcc
>
> $ which cc
> /usr/bin/cc
>
>> but this is not true, when I call to gcc works correctly, todod
>> tutorials tell me that do the following ./configure --cc=gcc or
>> ./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3
>
> Wrong, useless, tutorials.  What you really do, if needed (and it really
> shouldn't be needed, see above).
>
> ./configure CC=gcc
>
> In fact you can learn that by simply running:
>
> ./configure --help
>
> Reagards.
> --
> René Berber
>
>
>
> --
> Problem reports:       http://cygwin.com/problems.html
> FAQ:                   http://cygwin.com/faq/
> Documentation:         http://cygwin.com/docs.html
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>

no on C:\cygwin\usr no gcc folder but if the mingw32 folder, this is
vygwin error because the whole development category is installed

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: falled compilations

[Brian Inglis]

On 2016-10-18 19:15, juan carlos Rebate wrote:
> 2016-10-19 2:31 GMT+02:00 René Berber <rene.berber@gmail.com>:
>> On 10/18/2016 7:04 PM, juan carlos Rebate wrote:
>>> in the three applications receive the same error
>>> error cc either not exit or no work,
>> First check that gcc is in the path, something like this (in mintty):
>> $ which gcc
>> /usr/bin/gcc
>> $ which cc
>> /usr/bin/cc
>>> but this is not true, when I call to gcc works correctly, todod
>>> tutorials tell me that do the following ./configure --cc=gcc or
>>> ./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3
>> Wrong, useless, tutorials.  What you really do, if needed (and it really
>> shouldn't be needed, see above).
>> ./configure CC=gcc
>> In fact you can learn that by simply running:
>> ./configure --help
> no on C:\cygwin\usr no gcc folder but if the mingw32 folder, this is
> vygwin error because the whole development category is installed

On Unix most executables have no extension, so Cygwin does not always
show the .exe following a program name, and /usr/bin/gcc is the normal
Cygwin output for the compiler gcc.exe, and is not a folder name.
If you look for the file under Windows Explorer, you will see the
directory entry forgcc.exe, unless you hide extensions.

Please run Cygwin using the Cygwin Terminal Start Menu Entry;
in that window, cd to the directory where the program configure script
was downloaded; run the following command:
	./configure && make
without adding any other options, and post the output in a reply here.

Without actual error messages, no one can see if you have any issues
which need fixed.

-- 
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: falled compilations

[juan carlos Rebate]

2016-10-19 3:50 GMT+02:00 Brian Inglis <Brian.Inglis@systematicsw.ab.ca>:
> On 2016-10-18 19:15, juan carlos Rebate wrote:
>>
>> 2016-10-19 2:31 GMT+02:00 René Berber <rene.berber@gmail.com>:
>>>
>>> On 10/18/2016 7:04 PM, juan carlos Rebate wrote:
>>>>
>>>> in the three applications receive the same error
>>>> error cc either not exit or no work,
>>>
>>> First check that gcc is in the path, something like this (in mintty):
>>> $ which gcc
>>> /usr/bin/gcc
>>> $ which cc
>>> /usr/bin/cc
>>>>
>>>> but this is not true, when I call to gcc works correctly, todod
>>>> tutorials tell me that do the following ./configure --cc=gcc or
>>>> ./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3
>>>
>>> Wrong, useless, tutorials.  What you really do, if needed (and it really
>>> shouldn't be needed, see above).
>>> ./configure CC=gcc
>>> In fact you can learn that by simply running:
>>> ./configure --help
>>
>> no on C:\cygwin\usr no gcc folder but if the mingw32 folder, this is
>> vygwin error because the whole development category is installed
>
>
> On Unix most executables have no extension, so Cygwin does not always
> show the .exe following a program name, and /usr/bin/gcc is the normal
> Cygwin output for the compiler gcc.exe, and is not a folder name.
> If you look for the file under Windows Explorer, you will see the
> directory entry forgcc.exe, unless you hide extensions.
>
> Please run Cygwin using the Cygwin Terminal Start Menu Entry;
> in that window, cd to the directory where the program configure script
> was downloaded; run the following command:
>         ./configure && make
> without adding any other options, and post the output in a reply here.
>
jc@DESKTOP-A72U7VL ~/qemu
$  ./configure && make

ERROR: "cc" either does not exist or does not work

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: falled compilations

[Brian Inglis]

On 2016-10-18 20:10, juan carlos Rebate wrote:
> 2016-10-19 3:50 GMT+02:00 Brian Inglis <Brian.Inglis@systematicsw.ab.ca>:
>> On 2016-10-18 19:15, juan carlos Rebate wrote:
>>> 2016-10-19 2:31 GMT+02:00 René Berber <rene.berber@gmail.com>:
>>>> On 10/18/2016 7:04 PM, juan carlos Rebate wrote:
>>>>> in the three applications receive the same error
>>>>> error cc either not exit or no work,
>>>> First check that gcc is in the path, something like this (in mintty):
>>>> $ which gcc
>>>> /usr/bin/gcc
>>>> $ which cc
>>>> /usr/bin/cc
>>>>> but this is not true, when I call to gcc works correctly, todod
>>>>> tutorials tell me that do the following ./configure --cc=gcc or
>>>>> ./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3
>>>> Wrong, useless, tutorials.  What you really do, if needed (and it really
>>>> shouldn't be needed, see above).
>>>> ./configure CC=gcc
>>>> In fact you can learn that by simply running:
>>>> ./configure --help
>> On Unix most executables have no extension, so Cygwin does not always
>> show the .exe following a program name, and /usr/bin/gcc is the normal
>> Cygwin output for the compiler gcc.exe, and is not a folder name.
>> If you look for the file under Windows Explorer, you will see the
>> directory entry forgcc.exe, unless you hide extensions.
>> Please run Cygwin using the Cygwin Terminal Start Menu Entry;
>> in that window, cd to the directory where the program configure script
>> was downloaded; run the following command:
>>         ./configure && make
>> without adding any other options, and post the output in a reply here.
> jc@DESKTOP-A72U7VL ~/qemu
> $  ./configure && make
>
> ERROR: "cc" either does not exist or does not work

Okay you said earlier:

>>> no on C:\cygwin\usr no gcc folder but if the mingw32 folder, this is
>>> vygwin error because the whole development category is installed

which implies you installed MinGW, not Cygwin, tools, causing the issue.

You should ask about using these tools on the MinGW mailing list, see:

https://sourceforge.net/p/mingw/mailman/mingw-users/

after reading and following:

http://www.mingw.org/wiki/Getting_Started
http://www.mingw.org/wiki/HOWTO_Install_the_MinGW_GCC_Compiler_Suite
http://www.mingw.org/wiki/MinGW_for_First_Time_Users_HOWTO

-- 
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: falled compilations

[Brian Inglis]

On 2016-10-18 20:10, juan carlos Rebate wrote:
> 2016-10-19 3:50 GMT+02:00 Brian Inglis <Brian.Inglis@systematicsw.ab.ca>:
>> On 2016-10-18 19:15, juan carlos Rebate wrote:
>>> 2016-10-19 2:31 GMT+02:00 René Berber <rene.berber@gmail.com>:
>>>> On 10/18/2016 7:04 PM, juan carlos Rebate wrote:
>>>>> in the three applications receive the same error
>>>>> error cc either not exit or no work,
>>>> First check that gcc is in the path, something like this (in mintty):
>>>> $ which gcc
>>>> /usr/bin/gcc
>>>> $ which cc
>>>> /usr/bin/cc
>>>>> but this is not true, when I call to gcc works correctly, todod
>>>>> tutorials tell me that do the following ./configure --cc=gcc or
>>>>> ./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3
>>>> Wrong, useless, tutorials.  What you really do, if needed (and it really
>>>> shouldn't be needed, see above).
>>>> ./configure CC=gcc
>>>> In fact you can learn that by simply running:
>>>> ./configure --help
>> On Unix most executables have no extension, so Cygwin does not always
>> show the .exe following a program name, and /usr/bin/gcc is the normal
>> Cygwin output for the compiler gcc.exe, and is not a folder name.
>> If you look for the file under Windows Explorer, you will see the
>> directory entry forgcc.exe, unless you hide extensions.
>> Please run Cygwin using the Cygwin Terminal Start Menu Entry;
>> in that window, cd to the directory where the program configure script
>> was downloaded; run the following command:
>>         ./configure && make
>> without adding any other options, and post the output in a reply here.
> jc@DESKTOP-A72U7VL ~/qemu
> $  ./configure && make
>
> ERROR: "cc" either does not exist or does not work

Okay you said earlier:

>>> no on C:\cygwin\usr no gcc folder but if the mingw32 folder, this is
>>> vygwin error because the whole development category is installed

which implies you installed MinGW, not Cygwin, tools, causing the issue.

You should ask about using these tools on the MinGW mailing list, see:

https://sourceforge.net/p/mingw/mailman/mingw-users/

after reading and following:

http://www.mingw.org/wiki/Getting_Started
http://www.mingw.org/wiki/HOWTO_Install_the_MinGW_GCC_Compiler_Suite
http://www.mingw.org/wiki/MinGW_for_First_Time_Users_HOWTO

-- 
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: falled compilations

[juan carlos Rebate]

2016-10-19 5:33 GMT+02:00 Brian Inglis <Brian.Inglis@systematicsw.ab.ca>:
> On 2016-10-18 20:10, juan carlos Rebate wrote:
>>
>> 2016-10-19 3:50 GMT+02:00 Brian Inglis <Brian.Inglis@systematicsw.ab.ca>:
>>>
>>> On 2016-10-18 19:15, juan carlos Rebate wrote:
>>>>
>>>> 2016-10-19 2:31 GMT+02:00 René Berber <rene.berber@gmail.com>:
>>>>>
>>>>> On 10/18/2016 7:04 PM, juan carlos Rebate wrote:
>>>>>>
>>>>>> in the three applications receive the same error
>>>>>> error cc either not exit or no work,
>>>>>
>>>>> First check that gcc is in the path, something like this (in mintty):
>>>>> $ which gcc
>>>>> /usr/bin/gcc
>>>>> $ which cc
>>>>> /usr/bin/cc
>>>>>>
>>>>>> but this is not true, when I call to gcc works correctly, todod
>>>>>> tutorials tell me that do the following ./configure --cc=gcc or
>>>>>> ./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3
>>>>>
>>>>> Wrong, useless, tutorials.  What you really do, if needed (and it
>>>>> really
>>>>> shouldn't be needed, see above).
>>>>> ./configure CC=gcc
>>>>> In fact you can learn that by simply running:
>>>>> ./configure --help
>>>
>>> On Unix most executables have no extension, so Cygwin does not always
>>> show the .exe following a program name, and /usr/bin/gcc is the normal
>>> Cygwin output for the compiler gcc.exe, and is not a folder name.
>>> If you look for the file under Windows Explorer, you will see the
>>> directory entry forgcc.exe, unless you hide extensions.
>>> Please run Cygwin using the Cygwin Terminal Start Menu Entry;
>>> in that window, cd to the directory where the program configure script
>>> was downloaded; run the following command:
>>>         ./configure && make
>>> without adding any other options, and post the output in a reply here.
>>
>> jc@DESKTOP-A72U7VL ~/qemu
>> $  ./configure && make
>>
>> ERROR: "cc" either does not exist or does not work
>
>
> Okay you said earlier:
>
>>>> no on C:\cygwin\usr no gcc folder but if the mingw32 folder, this is
>>>> vygwin error because the whole development category is installed
>
>
> which implies you installed MinGW, not Cygwin, tools, causing the issue.
>
> You should ask about using these tools on the MinGW mailing list, see:
>
> https://sourceforge.net/p/mingw/mailman/mingw-users/
>
> after reading and following:
>
> http://www.mingw.org/wiki/Getting_Started
> http://www.mingw.org/wiki/HOWTO_Install_the_MinGW_GCC_Compiler_Suite
> http://www.mingw.org/wiki/MinGW_for_First_Time_Users_HOWTO
>
> --
> Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
>
> --
> Problem reports:       http://cygwin.com/problems.html
> FAQ:                   http://cygwin.com/faq/
> Documentation:         http://cygwin.com/docs.html
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>
I do not understand what I said, I said that from the installation
graphical cygwin instaé entire category development to avoid
dependency problems, was cygwin who installed mingw instead of gcc so
that nueevo indicate that failure cygwin

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: failed configure

[Brian Inglis]

On 2016-10-19 09:09, juan carlos Rebate wrote:
> 2016-10-19 5:33 GMT+02:00 Brian Inglis <Brian.Inglis@systematicsw.ab.ca>:
>> On 2016-10-18 20:10, juan carlos Rebate wrote:
>>> 2016-10-19 3:50 GMT+02:00 Brian Inglis <Brian.Inglis@systematicsw.ab.ca>:
>>>> On 2016-10-18 19:15, juan carlos Rebate wrote:
>>>>> 2016-10-19 2:31 GMT+02:00 René Berber <rene.berber@gmail.com>:
>>>>>> On 10/18/2016 7:04 PM, juan carlos Rebate wrote:
>>>>>>> in the three applications receive the same error
>>>>>>> error cc either not exit or no work,
>>>>>> First check that gcc is in the path, something like this (in mintty):
>>>>>> $ which gcc
>>>>>> /usr/bin/gcc
>>>>>> $ which cc
>>>>>> /usr/bin/cc
>>>>>>> but this is not true, when I call to gcc works correctly, todod
>>>>>>> tutorials tell me that do the following ./configure --cc=gcc or
>>>>>>> ./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3
>>>>>> Wrong, useless, tutorials.  What you really do, if needed (and it
>>>>>> really
>>>>>> shouldn't be needed, see above).
>>>>>> ./configure CC=gcc
>>>>>> In fact you can learn that by simply running:
>>>>>> ./configure --help
>>>> On Unix most executables have no extension, so Cygwin does not always
>>>> show the .exe following a program name, and /usr/bin/gcc is the normal
>>>> Cygwin output for the compiler gcc.exe, and is not a folder name.
>>>> If you look for the file under Windows Explorer, you will see the
>>>> directory entry for gcc.exe, unless you hide extensions.
>>>> Please run Cygwin using the Cygwin Terminal Start Menu Entry;
>>>> in that window, cd to the directory where the program configure script
>>>> was downloaded; run the following command:
>>>>         ./configure && make
>>>> without adding any other options, and post the output in a reply here.
>>> jc@DESKTOP-A72U7VL ~/qemu
>>> $  ./configure && make
>>> ERROR: "cc" either does not exist or does not work
>> Okay you said earlier:
>>>>> no on C:\cygwin\usr no gcc folder but if the mingw32 folder, this is
>>>>> vygwin error because the whole development category is installed
>> which implies you installed MinGW, not Cygwin, tools, causing the issue.
>> You should ask about using these tools on the MinGW mailing list, see:
>> https://sourceforge.net/p/mingw/mailman/mingw-users/
>> after reading and following:
>> http://www.mingw.org/wiki/Getting_Started
>> http://www.mingw.org/wiki/HOWTO_Install_the_MinGW_GCC_Compiler_Suite
>> http://www.mingw.org/wiki/MinGW_for_First_Time_Users_HOWTO
> I do not understand what I said, I said that from the installation
> graphical cygwin instaé entire category development to avoid
> dependency problems, was cygwin who installed mingw instead of gcc so
> that nueevo indicate that failure cygwin

If you *successfully* installed the entire Cygwin Base + Development
categories, you would at least have gcc and cc symlinked to gcc available.
Whether you would be able to run anything without address space
exhaustion would be the likely issue.
Please check Cygwin /var/log/setup.log.full to see if errors were
reported during installation - attach the log in a reply if so.

Else please follow the Cygwin problem reporting guidelines and attach
the output from running cygcheck -svr > cygcheck.txt to a reply post.

-- 
Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: failed configure

[juan carlos Rebate]

2016-10-20 3:33 GMT+02:00 Brian Inglis <Brian.Inglis@systematicsw.ab.ca>:
> On 2016-10-19 09:09, juan carlos Rebate wrote:
>>
>> 2016-10-19 5:33 GMT+02:00 Brian Inglis <Brian.Inglis@systematicsw.ab.ca>:
>>>
>>> On 2016-10-18 20:10, juan carlos Rebate wrote:
>>>>
>>>> 2016-10-19 3:50 GMT+02:00 Brian Inglis
>>>> <Brian.Inglis@systematicsw.ab.ca>:
>>>>>
>>>>> On 2016-10-18 19:15, juan carlos Rebate wrote:
>>>>>>
>>>>>> 2016-10-19 2:31 GMT+02:00 René Berber <rene.berber@gmail.com>:
>>>>>>>
>>>>>>> On 10/18/2016 7:04 PM, juan carlos Rebate wrote:
>>>>>>>>
>>>>>>>> in the three applications receive the same error
>>>>>>>> error cc either not exit or no work,
>>>>>>>
>>>>>>> First check that gcc is in the path, something like this (in mintty):
>>>>>>> $ which gcc
>>>>>>> /usr/bin/gcc
>>>>>>> $ which cc
>>>>>>> /usr/bin/cc
>>>>>>>>
>>>>>>>> but this is not true, when I call to gcc works correctly, todod
>>>>>>>> tutorials tell me that do the following ./configure --cc=gcc or
>>>>>>>> ./configure --cc="gcc-3 -mno-cygwin" --host-cc=gcc-3
>>>>>>>
>>>>>>> Wrong, useless, tutorials.  What you really do, if needed (and it
>>>>>>> really
>>>>>>> shouldn't be needed, see above).
>>>>>>> ./configure CC=gcc
>>>>>>> In fact you can learn that by simply running:
>>>>>>> ./configure --help
>>>>>
>>>>> On Unix most executables have no extension, so Cygwin does not always
>>>>> show the .exe following a program name, and /usr/bin/gcc is the normal
>>>>> Cygwin output for the compiler gcc.exe, and is not a folder name.
>>>>> If you look for the file under Windows Explorer, you will see the
>>>>> directory entry for gcc.exe, unless you hide extensions.
>>>>> Please run Cygwin using the Cygwin Terminal Start Menu Entry;
>>>>> in that window, cd to the directory where the program configure script
>>>>> was downloaded; run the following command:
>>>>>         ./configure && make
>>>>> without adding any other options, and post the output in a reply here.
>>>>
>>>> jc@DESKTOP-A72U7VL ~/qemu
>>>> $  ./configure && make
>>>> ERROR: "cc" either does not exist or does not work
>>>
>>> Okay you said earlier:
>>>>>>
>>>>>> no on C:\cygwin\usr no gcc folder but if the mingw32 folder, this is
>>>>>> vygwin error because the whole development category is installed
>>>
>>> which implies you installed MinGW, not Cygwin, tools, causing the issue.
>>> You should ask about using these tools on the MinGW mailing list, see:
>>> https://sourceforge.net/p/mingw/mailman/mingw-users/
>>> after reading and following:
>>> http://www.mingw.org/wiki/Getting_Started
>>> http://www.mingw.org/wiki/HOWTO_Install_the_MinGW_GCC_Compiler_Suite
>>> http://www.mingw.org/wiki/MinGW_for_First_Time_Users_HOWTO
>>
>> I do not understand what I said, I said that from the installation
>> graphical cygwin instaé entire category development to avoid
>> dependency problems, was cygwin who installed mingw instead of gcc so
>> that nueevo indicate that failure cygwin
>
>
> If you *successfully* installed the entire Cygwin Base + Development
> categories, you would at least have gcc and cc symlinked to gcc available.
> Whether you would be able to run anything without address space
> exhaustion would be the likely issue.
> Please check Cygwin /var/log/setup.log.full to see if errors were
> reported during installation - attach the log in a reply if so.
>
> Else please follow the Cygwin problem reporting guidelines and attach
> the output from running cygcheck -svr > cygcheck.txt to a reply post.
>
> --
> Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada
>
> --
> Problem reports:       http://cygwin.com/problems.html
> FAQ:                   http://cygwin.com/faq/
> Documentation:         http://cygwin.com/docs.html
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>
I discovered that this is an error file set for qemu, .configure not
recognize the path of gcc on cygwin, I do not abut how to type in the
path, but I have found that when cygwin installed gcc is installed but
not install g ++ eventhough be releccionado
excuse my bad English, I have 30 years and not have education Anglo
because the Spanish education system is very bad

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple