* at91sam9263ek
@ 2008-11-06 18:46 Evgeniy Dushistov
2008-11-10 9:21 ` at91sam9263ek Andrew Lunn
0 siblings, 1 reply; 12+ messages in thread
From: Evgeniy Dushistov @ 2008-11-06 18:46 UTC (permalink / raw)
To: ecos-discuss, ecos-devel
Hi,
I want to see working ecos on at91sam9263ek board.
As far as I know, there is no freely available source code of ecos port on
this hardware, am I right? (I know about ecoscentric, but it is not
freely available).
May be anybody is working on such kind of port?
Right now I'm reading docs about cdl language, and stuck on which
variant to choose: create directory at91sam9 in
packages/hal/arm/arm9 and write hal package from scratch
or use packages/hal/arm/at91 stuff, at91sam9263ek is very similar
to at91sam7s, but
packages/hal/arm/at91/var/current/cdl/hal_arm_at91.cdl
contain things like "implements CYGINT_HAL_ARM_ARCH_ARM7",
may be someone, who has more experience than I (i.e. > 0) with ecos
configuration framework, could suggest which solution to choose?
--
/Evgeniy
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: at91sam9263ek
2008-11-06 18:46 at91sam9263ek Evgeniy Dushistov
@ 2008-11-10 9:21 ` Andrew Lunn
2008-11-11 18:55 ` [PATCH] [RFC] at91sam9263ek support Evgeniy Dushistov
2008-11-18 16:38 ` at91sam9263ek Jonathan Larmour
0 siblings, 2 replies; 12+ messages in thread
From: Andrew Lunn @ 2008-11-10 9:21 UTC (permalink / raw)
To: Evgeniy Dushistov; +Cc: ecos-devel
On Thu, Nov 06, 2008 at 09:23:28PM +0300, Evgeniy Dushistov wrote:
> Hi,
>
> I want to see working ecos on at91sam9263ek board.
> As far as I know, there is no freely available source code of ecos port on
> this hardware, am I right? (I know about ecoscentric, but it is not
> freely available).
>
> May be anybody is working on such kind of port?
>
> Right now I'm reading docs about cdl language, and stuck on which
> variant to choose: create directory at91sam9 in
> packages/hal/arm/arm9 and write hal package from scratch
> or use packages/hal/arm/at91 stuff, at91sam9263ek is very similar
> to at91sam7s, but
> packages/hal/arm/at91/var/current/cdl/hal_arm_at91.cdl
> contain things like "implements CYGINT_HAL_ARM_ARCH_ARM7",
> may be someone, who has more experience than I (i.e. > 0) with ecos
> configuration framework, could suggest which solution to choose?
You could change this. Do something like
cdl_option CYGHWR_HAL_ARM_AT91_ARM7 {
display "ARM7 core"
no_define
calculated { is_substring("R40807 R40008 M42800A M55800A JTST AT91SAM7S", CYGHWR_HAL_ARM_AT91) }
implements CYGINT_HAL_ARM_ARCH_ARM7
}
cdl_option CYGHWR_HAL_ARM_AT91_ARM9 {
display "ARM9 core"
no_define
calculated { is_substring("AT91SAM9", CYGHWR_HAL_ARM_AT91) }
implements CYGINT_HAL_ARM_ARCH_ARM9
}
Andrew
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] [RFC] at91sam9263ek support
2008-11-10 9:21 ` at91sam9263ek Andrew Lunn
@ 2008-11-11 18:55 ` Evgeniy Dushistov
2008-11-26 15:06 ` roberto.lavarini
2008-11-18 16:38 ` at91sam9263ek Jonathan Larmour
1 sibling, 1 reply; 12+ messages in thread
From: Evgeniy Dushistov @ 2008-11-11 18:55 UTC (permalink / raw)
To: Andrew Lunn; +Cc: ecos-devel, ecos-patches
[-- Attachment #1: Type: text/plain, Size: 928 bytes --]
On Mon, Nov 10, 2008 at 10:20:57AM +0100, Andrew Lunn wrote:
> On Thu, Nov 06, 2008 at 09:23:28PM +0300, Evgeniy Dushistov wrote:
> You could change this. Do something like
Thanks for suggestion.
Here is patch for initial support of atmel at91sam9263ek
against current cvs tree.
Using this patch it is possible to get redboot console
on dbgu port if you load it into memory via sam-ba or jtag.
Any comments about this patch?
The next step I think will be implement booting from flash
memory.
But at91sam9263k board has limitations for
the "the first level" application, it size should be < 72K,
or it should consists of several parts when one load another.
So how do you think is it possible to build redboot with
nand,nor and serial usb support and image size less
then 72K? Another option may be usage of
"the first level" bootloader from atmel(at91bootstrap),
but this solution has its own disadvantages.
--
/Evgeniy
[-- Attachment #2: ecos_at91sam9263ek_support_alpha_1.patch --]
[-- Type: text/plain, Size: 71226 bytes --]
diff --git a/packages/ecos.db b/packages/ecos.db
index bd3595c..a133738 100644
--- a/packages/ecos.db
+++ b/packages/ecos.db
@@ -2701,6 +2701,17 @@ package CYGPKG_HAL_ARM_AT91SAM7 {
an Atmel AT91SAM7 family of CPUs."
}
+package CYGPKG_HAL_ARM_AT91SAM9 {
+ alias { "Atmel AT91SAM9" hal_arm_at91sam9 arm_at91_sam9 }
+ directory hal/arm/at91/at91sam9
+ script hal_arm_at91sam9.cdl
+ hardware
+ description "
+ The at91sam9 HAL package provides the support needed to run eCos on
+ an Atmel AT91SAM9 family of CPUs."
+}
+
+
package CYGPKG_HAL_ARM_AT91SAM7SEK {
alias { "Atmel AT91SAM7S" hal_arm_at91sam7sek arm_at91_sam7sek }
directory hal/arm/at91/at91sam7sek
@@ -2781,6 +2792,16 @@ package CYGPKG_HAL_ARM_AT91_PHYCORE {
an PHYTEC evaluation board (phyCORE AT91M55800A based on HD200)."
}
+package CYGPKG_HAL_ARM_AT91SAM9263EK {
+ alias { "Atmel AT91SAM9263-EK" hal_arm_at91sam9263ek arm_at91sam9263ek }
+ directory hal/arm/at91/at91sam9263ek
+ script hal_arm_at91sam9263ek.cdl
+ hardware
+ description "
+ The at91sam9263ek HAL package provides the support needed to run eCos on
+ an Atmel AT91SAM9263-EK development board."
+}
+
package CYGPKG_HAL_ARM_LPC2XXX {
alias { "Philips LPC2XXX variant HAL" hal_arm_lpc2xxx arm_lpc2xxx_hal }
directory hal/arm/lpc2xxx/var
@@ -4646,6 +4667,21 @@ target at91sam7xek {
Atmel AT91SAM7X-EK evaluation board."
}
+target at91sam9263ek {
+ alias { "Atmel AT91SAM9263-EK evaluation board" at91_at91sam9263ek }
+ packages { CYGPKG_HAL_ARM
+ CYGPKG_HAL_ARM_AT91
+ CYGPKG_HAL_ARM_AT91SAM9
+ CYGPKG_HAL_ARM_AT91SAM9263EK
+ CYGPKG_IO_SERIAL_ARM_AT91
+ }
+ description "
+ The at91sam9263ek target provides the packages needed to run eCos on an
+ Atmel AT91SAM9263-EK evaluation board."
+}
+
+
+
target sam7ex256 {
alias { "Olimex SAM7-EX256 evaluation board" at91_sam7ex256 }
packages { CYGPKG_HAL_ARM
diff --git a/packages/hal/arm/at91/at91sam9/current/cdl/hal_arm_at91sam9.cdl b/packages/hal/arm/at91/at91sam9/current/cdl/hal_arm_at91sam9.cdl
new file mode 100644
index 0000000..5e237f3
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9/current/cdl/hal_arm_at91sam9.cdl
@@ -0,0 +1,441 @@
+# ====================================================================
+#
+# hal_arm_at91_sam9.cdl
+#
+# ARM AT91 SAM7 HAL package configuration data
+#
+# ====================================================================
+#####ECOSGPLCOPYRIGHTBEGIN####
+## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+## Copyright (C) 2003 Nick Garnett <nickg@calivar.com>
+## Copyright (C) 2005 eCosCentric Ltd
+## Copyright (C) 2005 Andrew Lunn
+## Copyright (C) 2008 Evgeniy Dushistov
+##
+## eCos is free software; you can redistribute it and/or modify it under
+## the terms of the GNU General Public License as published by the Free
+## Software Foundation; either version 2 or (at your option) any later version.
+##
+## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+## WARRANTY; without even the implied warranty of MERCHANTABILITY or
+## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+## for more details.
+##
+## You should have received a copy of the GNU General Public License along
+## with eCos; if not, write to the Free Software Foundation, Inc.,
+## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+##
+## As a special exception, if other files instantiate templates or use macros
+## or inline functions from this file, or you compile this file and link it
+## with other works to produce a work based on this file, this file does not
+## by itself cause the resulting work to be covered by the GNU General Public
+## License. However the source code for this file must still be made available
+## in accordance with section (3) of the GNU General Public License.
+##
+## This exception does not invalidate any other reasons why a work based on
+## this file might be covered by the GNU General Public License.
+## -------------------------------------------
+#####ECOSGPLCOPYRIGHTEND####
+# ====================================================================
+######DESCRIPTIONBEGIN####
+#
+# Author(s): gthomas
+# Contributors: gthomas, tkoeller, nickg, Oliver Munz, asl
+# Date: 2005-06-20
+#
+#####DESCRIPTIONEND####
+#
+# ====================================================================
+
+cdl_package CYGPKG_HAL_ARM_AT91SAM9 {
+ display "Atmel AT91SAM9 HAL"
+ parent CYGPKG_HAL_ARM
+ define_header hal_arm_at91sam9.h
+ include_dir cyg/hal
+ hardware
+ description "
+ The AT91SAM9 HAL package provides the support needed to run
+ eCos on an Atmel AT91SAM9 based board."
+
+ compile at91sam9_misc.c
+
+ requires { CYGHWR_HAL_ARM_AT91_FIQ }
+# requires { CYGHWR_HAL_ARM_AT91SAM7 == "at91sam7s32" implies
+# CYGPKG_IO_SERIAL_ARM_AT91_SERIAL0 == 0 }
+
+ implements CYGINT_HAL_ARM_AT91_SERIAL_DBG_HW
+ implements CYGINT_HAL_ARM_AT91_PIT_HW
+ implements CYGINT_HAL_ARM_AT91_SYS_INTERRUPT
+
+ define_proc {
+ puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H <pkgconf/hal_arm.h>"
+ puts $::cdl_system_header "#define CYGBLD_HAL_VARIANT_H <pkgconf/hal_arm_at91.h>"
+ puts $::cdl_system_header "#define CYGBLD_HAL_ARM_VAR_IO_H"
+ }
+
+ cdl_option CYGHWR_HAL_ARM_AT91SAM9 {
+ display "AT91SAM9 variant used"
+ flavor data
+ default_value {"at91sam9263ek"}
+ legal_values {"at91sam9263ek"}
+ description "
+ The AT91SAM9 microcontroller family has several variants,
+ the main differences being the amount of on-chip SRAM,
+ FLASH, peripherals and their layout. This option allows the
+ platform HALs to select the specific microcontroller
+ being used."
+ }
+
+
+ cdl_component CYGNUM_HAL_RTC_CONSTANTS {
+ display "Real-time clock constants"
+ flavor none
+
+ cdl_option CYGNUM_HAL_RTC_NUMERATOR {
+ display "Real-time clock numerator"
+ flavor data
+ default_value 1000000000
+ }
+ cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
+ display "Real-time clock denominator"
+ flavor data
+ default_value 100
+ }
+ cdl_option CYGNUM_HAL_RTC_PERIOD {
+ display "Real-time clock period"
+ flavor data
+ legal_values 1 to 0xffff
+ calculated { (CYGNUM_HAL_RTC_NUMERATOR *
+ CYGNUM_HAL_ARM_AT91_CLOCK_SPEED /
+ (CYGBLD_HAL_ARM_AT91_TIMER_TC ? 32 : 16) /
+ CYGNUM_HAL_RTC_DENOMINATOR /
+ 1000000000
+ )
+ }
+ description "Value to program into the RTC clock generator."
+ }
+ }
+
+ cdl_component CYG_HAL_STARTUP {
+ display "Startup type"
+ flavor data
+ default_value {"ROM"}
+ legal_values {"RAM" "ROM"}
+ no_define
+ define -file system.h CYG_HAL_STARTUP
+ description "
+ When targeting the AT91SAM9 eval boards it is possible to build
+ the system for either RAM bootstrap or ROM bootstrap(s). Select
+ 'ram' when building programs to load into RAM using on board
+ debug software such as Angel or eCos GDB stubs. Select 'rom'
+ when building a stand-alone application which will be put
+ into ROM"
+ }
+
+ cdl_option CYGNUM_HAL_ARM_AT91_IMAGE_ADDRESS {
+ display "Address in flash the image should live"
+ active_if { CYG_HAL_STARTUP == "ROM" }
+ flavor data
+ default_value 0x00100000
+ description "
+ This optionspecifies where in flash the image
+ lives. By default it is at the bottom of the flash,
+ but for example redboot may be at the bottom and an
+ application lives higher up, which is acheived by
+ setting the address here."
+ }
+
+ # Real-time clock/counter specifics
+ cdl_option CYGNUM_HAL_ARM_AT91_CLOCK_SPEED {
+ display "CPU clock speed"
+ flavor data
+ calculated { CYGNUM_HAL_ARM_AT91_CLOCK_OSC_MAIN *
+ CYGNUM_HAL_ARM_AT91_PLL_MULTIPLIER /
+ CYGNUM_HAL_ARM_AT91_PLL_DIVIDER / 2}
+ legal_values { 0 to 220000000 }
+ description "
+ The master clock-frequency has to be 48MHz, 96MHz or
+ 192MHz for the USB to work correctly. The clock setup uses
+ PLL clock divided by two"
+ }
+
+ cdl_option CYGNUM_HAL_ARM_AT91_CLOCK_XIN_FREQ_MAX {
+ display "Input clock frequency maximum"
+ flavor data
+ calculated { CYGNUM_HAL_ARM_AT91_CLOCK_TYPE == "CRYSTAL" ?
+ 20000000 : 50000000 }
+ description "
+
+ The oscilator in the AT91SAM allows a crystal of up to
+ 20MHz. However by feeding in directly a clock signal, it
+ is possible to use upto 50MHz in XIN."
+ }
+
+ cdl_option CYGNUM_HAL_ARM_AT91_CLOCK_OSC_MAIN {
+ display "Main oscillator frequency"
+ flavor data
+ legal_values { 3000000 to CYGNUM_HAL_ARM_AT91_CLOCK_XIN_FREQ_MAX }
+ default_value { 18432000 }
+ description "
+ The frequency of the clock input, be it a crystal or a clock
+ signal"
+ }
+
+ cdl_option CYGNUM_HAL_ARM_AT91_CLOCK_TYPE {
+ display "Type of main frequency input"
+ flavor data
+ default_value { "CRYSTAL" }
+ legal_values { "CRYSTAL" "EXTCLOCK" }
+ description "
+ Whether a crystal or a XIN input clock is clocking the device."
+ }
+
+ cdl_option CYGNUM_HAL_ARM_AT91_PMC_MOR_OSCCOUNT {
+ display "Startup time for the main oscillator"
+ flavor data
+ legal_values { 0 to 255 }
+ default_value 64
+ description "
+ Specifies the number of Slow Clock cycles multiplied by 8
+ for the Main Oscillator start-up time. 64 is the number suggested
+ by the kind folk at Atmel"
+ }
+
+ cdl_option CYGNUM_HAL_ARM_AT91_PLL_DIVIDER {
+ display "Divider for PLL clock"
+ flavor data
+ legal_values { 0 to 255 }
+ default_value 9
+ description "
+ The X-tal clock is divided by this value when generating the
+ PLL clock"
+ }
+
+ cdl_option CYGNUM_HAL_ARM_AT91_PLL_MULTIPLIER {
+ display "Multiplier for PLL clock"
+ flavor data
+ legal_values { 0 to 2047 }
+ default_value 109
+ description "
+ The X-tal clock is multiplied by this value when generating
+ the PLL clock."
+ }
+
+ cdl_option CYGNUM_HAL_ARM_AT91_PLL_COUNT {
+ display "Startup Counter for PLL clock"
+ flavor data
+ legal_values { 0 to 64 }
+ default_value 16
+ description "
+ Specifies the number of slow clock cycles before the LOCK bit
+ is set in PMC_SR after PLL Register is written. The Atmel people
+ suggest that 16 should be fine"
+ }
+
+ cdl_option CYGNUM_HAL_ARM_AT91_SLOW_CLOCK {
+ display "Slow clock frequency"
+ flavor data
+ default_value { 32768 }
+ description "
+ The slow clock is an LC oscillator which runs all the
+ time. The accuracy of this clock is not very high and
+ is temperature dependent."
+ }
+
+ cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
+ display "Number of communication channels on the board"
+ flavor data
+ default_value 4
+ description "
+ The AT91SAM9 development boards has two Serial port connectors.
+ these correspond to USART0 and the Debug Serial port. The chip
+ has a third serial port which does not have a 9pin D
+ connector, but is accessible via the patch panel pins."
+ }
+
+ cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
+ display "Debug serial port"
+ active_if CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
+ flavor data
+ legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
+ default_value 0
+ description "
+ The AT91SAM9 has three serial ports. This option
+ chooses which port will be used to connect to a host
+ running GDB."
+ }
+
+ cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
+ display "Diagnostic serial port"
+ active_if CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
+ flavor data
+ legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
+ default_value 1
+ description "
+ The AT91SAM9 board has three USART serial ports. This option
+ chooses which port will be used for diagnostic output."
+ }
+
+ cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
+ display "Diagnostic serial port baud rate"
+ flavor data
+ legal_values 9600 19200 38400 57600 115200
+ default_value 115200
+ description "
+ This option selects the baud rate used for the diagnostic port."
+ }
+
+ cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
+ display "GDB serial port baud rate"
+ flavor data
+ legal_values 9600 19200 38400 57600 115200
+ default_value 115200
+ description "
+ This option controls the baud rate used for the GDB connection."
+ }
+
+ cdl_option CYGBLD_HAL_ARM_AT91_BAUD_DYNAMIC {
+ display "Dynamic calculation of baud rate"
+ default_value 0
+ description "
+ The AT91SAM9 has a flexible clock generation mechanism
+ where the main clock used to drive peripherals can be
+ changed during run time. Such changes affect the serial port
+ baud rate generators. Enabling this option includes code
+ which calculates the baud rate setting dynamically from the
+ current clock settings. Without this option a static
+ calculation is performed which assumes the clock frequency
+ has not been changed."
+ }
+
+ cdl_option CYGSEM_HAL_ROM_MONITOR {
+ display "Behave as a ROM monitor"
+ flavor bool
+ default_value 0
+ parent CYGPKG_HAL_ROM_MONITOR
+ requires { CYG_HAL_STARTUP == "ROM" }
+ description "
+ Enable this option if this program is to be used as a ROM monitor,
+ i.e. applications will be loaded into RAM on the board, and this
+ ROM monitor may process exceptions or interrupts generated from the
+ application. This enables features such as utilizing a separate
+ interrupt stack when exceptions are generated."
+ }
+
+ cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
+ display "Work with a ROM monitor"
+ flavor booldata
+ legal_values { "Generic" "GDB_stubs" }
+ default_value { CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 }
+ parent CYGPKG_HAL_ROM_MONITOR
+ requires { CYG_HAL_STARTUP == "RAM" }
+ description "
+ Support can be enabled for different varieties of ROM monitor.
+ This support changes various eCos semantics such as the encoding
+ of diagnostic output, or the overriding of hardware interrupt
+ vectors.
+ Firstly there is \"Generic\" support which prevents the HAL
+ from overriding the hardware vectors that it does not use, to
+ instead allow an installed ROM monitor to handle them. This is
+ the most basic support which is likely to be common to most
+ implementations of ROM monitor.
+ \"GDB_stubs\" provides support when GDB stubs are included in
+ the ROM monitor or boot ROM."
+ }
+
+ cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
+ display "Redboot HAL options"
+ flavor none
+ no_define
+ parent CYGPKG_REDBOOT
+ active_if CYGPKG_REDBOOT
+ description "
+ This option lists the target's requirements for a valid Redboot
+ configuration."
+
+ cdl_option CYGBLD_BUILD_REDBOOT_BIN {
+ display "Build Redboot ROM binary image"
+ active_if CYGBLD_BUILD_REDBOOT
+ default_value 1
+ no_define
+ description "This option enables the conversion of the Redboot ELF
+ image to a binary image suitable for ROM programming."
+
+ make -priority 325 {
+ <PREFIX>/bin/redboot.bin : <PREFIX>/bin/redboot.elf
+ $(OBJCOPY) --strip-debug $< $(@:.bin=.img)
+ $(OBJCOPY) -O srec $< $(@:.bin=.srec)
+ $(OBJCOPY) -O binary $< $@
+ }
+ }
+ }
+
+ cdl_component CYGBLD_GLOBAL_OPTIONS {
+ display "Global build options"
+ flavor none
+ parent CYGPKG_NONE
+ description "
+ Global build options including control over
+ compiler flags, linker flags and choice of toolchain."
+
+ cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
+ display "Global command prefix"
+ flavor data
+ no_define
+ default_value { "arm-eabi" }
+ description "
+ This option specifies the command prefix used when
+ invoking the build tools."
+ }
+
+ cdl_option CYGBLD_GLOBAL_CFLAGS {
+ display "Global compiler flags"
+ flavor data
+ no_define
+ default_value { (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . "-mcpu=arm926ej-s -mfloat-abi=softfp -mfpu=vfp -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" }
+ description "
+ This option controls the global compiler flags which are used to
+ compile all packages by default. Individual packages may define
+ options which override these global flags."
+ }
+
+ cdl_option CYGBLD_GLOBAL_LDFLAGS {
+ display "Global linker flags"
+ flavor data
+ no_define
+ default_value { (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . "-mcpu=arm926ej-s -mfloat-abi=softfp -mfpu=vfp -Wl,--gc-sections -Wl,-static -g -nostdlib" }
+ description "
+ This option controls the global linker flags. Individual
+ packages may define options which override these global flags."
+ }
+ }
+
+ cdl_component CYGHWR_MEMORY_LAYOUT {
+ display "Memory layout"
+ flavor data
+ no_define
+ calculated { (CYG_HAL_STARTUP == "RAM") ? \
+ "arm_" . CYGHWR_HAL_ARM_AT91SAM9 . "_ram" :
+ "arm_" . CYGHWR_HAL_ARM_AT91SAM9 . "_rom" }
+
+ cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
+ display "Memory layout linker script fragment"
+ flavor data
+ no_define
+ define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
+ calculated { (CYG_HAL_STARTUP == "RAM") ? \
+ "<pkgconf/mlt_arm_" . CYGHWR_HAL_ARM_AT91SAM9 . "_ram.ldi>" :
+ "<pkgconf/mlt_arm_" . CYGHWR_HAL_ARM_AT91SAM9 . "_rom.ldi>" }
+ }
+
+ cdl_option CYGHWR_MEMORY_LAYOUT_H {
+ display "Memory layout header file"
+ flavor data
+ no_define
+ define -file system.h CYGHWR_MEMORY_LAYOUT_H
+ calculated { (CYG_HAL_STARTUP == "RAM") ? \
+ "<pkgconf/mlt_arm_" . CYGHWR_HAL_ARM_AT91SAM9 . "_ram.h>" :
+ "<pkgconf/mlt_arm_" . CYGHWR_HAL_ARM_AT91SAM9 . "_rom.h>" }
+ }
+ }
+}
diff --git a/packages/hal/arm/at91/at91sam9/current/include/hal_platform_ints.h b/packages/hal/arm/at91/at91sam9/current/include/hal_platform_ints.h
new file mode 100644
index 0000000..3ae9d35
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9/current/include/hal_platform_ints.h
@@ -0,0 +1,121 @@
+#ifndef CYGONCE_HAL_PLATFORM_INTS_H
+#define CYGONCE_HAL_PLATFORM_INTS_H
+//==========================================================================
+//
+// hal_platform_ints.h
+//
+// HAL Interrupt and clock assignments for AT91SAM9
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+// Copyright (C) 2006 eCosCentric Ltd
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): gthomas
+// Contributors: gthomas, Oliver Munz, Andrew Lunn, John Eigelaar, Evgeniy Dushistov
+// Date: 2001-07-12
+// Purpose: Define Interrupt support
+// Description: The interrupt specifics for the AT91SAM7 platform are
+// defined here.
+//
+// Usage: #include <cyg/hal/hal_platform_ints.h>
+// ...
+//
+//
+//####DESCRIPTIONEND####
+//
+//==========================================================================
+
+#include <pkgconf/hal_arm_at91sam9.h>
+
+#define CYGNUM_HAL_INTERRUPT_FIQ 0
+
+#define CYGNUM_HAL_INTERRUPT_SYS 1
+#define CYGNUM_HAL_INTERRUPT_PIOA 2
+
+#define CYGNUM_HAL_INTERRUPT_PIOB 3
+#define CYGNUM_HAL_INTERRUPT_PIOC_TO_PIOE 4
+
+#define CYGNUM_HAL_INTERRUPT_USART0 7
+#define CYGNUM_HAL_INTERRUPT_USART1 8
+#define CYGNUM_HAL_INTERRUPT_USART2 9
+#define CYGNUM_HAL_INTERRUPT_MCI0 10
+#define CYGNUM_HAL_INTERRUPT_MCI1 11
+#define CYGNUM_HAL_INTERRUPT_CAN 12
+#define CYGNUM_HAL_INTERRUPT_TWI 13
+#define CYGNUM_HAL_INTERRUPT_SPI0 14
+#define CYGNUM_HAL_INTERRUPT_SPI1 15
+#define CYGNUM_HAL_INTERRUPT_SSC0 16
+#define CYGNUM_HAL_INTERRUPT_SSC1 17
+#define CYGNUM_HAL_INTERRUPT_AC97C 18
+#define CYGNUM_HAL_INTERRUPT_TC0_TC1_TC3 19
+#define CYGNUM_HAL_INTERRUPT_PWMC 20
+#define CYGNUM_HAL_INTERRUPT_EMAC 21
+#define CYGNUM_HAL_INTERRUPT_2DGE 23
+#define CYGNUM_HAL_INTERRUPT_UDP 24
+#define CYGNUM_HAL_INTERRUPT_ISI 25
+#define CYGNUM_HAL_INTERRUPT_LCDC 26
+#define CYGNUM_HAL_INTERRUPT_DMA 27
+#define CYGNUM_HAL_INTERRUPT_UHP 29
+
+#define CYGNUM_HAL_INTERRUPT_IRQ0 30
+#define CYGNUM_HAL_INTERRUPT_IRQ1 31
+
+// Interrupts which are multiplexed on to the System Interrupt
+#define CYGNUM_HAL_INTERRUPT_PITC 32
+#define CYGNUM_HAL_INTERRUPT_RTTC 33
+#define CYGNUM_HAL_INTERRUPT_PMC 34
+#define CYGNUM_HAL_INTERRUPT_WDTC 36
+#define CYGNUM_HAL_INTERRUPT_RSTC 37
+#define CYGNUM_HAL_INTERRUPT_DBG 38
+
+#define CYGNUM_HAL_ISR_MIN 0
+#define CYGNUM_HAL_ISR_MAX 38
+
+#define CYGNUM_HAL_ISR_COUNT (CYGNUM_HAL_ISR_MAX + 1)
+
+// The vector used by the Real time clock
+#ifdef CYGBLD_HAL_ARM_AT91_TIMER_TC
+#define CYGNUM_HAL_INTERRUPT_RTC CYGNUM_HAL_INTERRUPT_TC0
+#endif
+#ifdef CYGBLD_HAL_ARM_AT91_TIMER_PIT
+#define CYGNUM_HAL_INTERRUPT_RTC CYGNUM_HAL_INTERRUPT_PITC
+#endif
+
+//----------------------------------------------------------------------------
+// Reset.
+__externC void hal_at91_reset_cpu(void);
+#define HAL_PLATFORM_RESET() hal_at91_reset_cpu()
+
+#define HAL_PLATFORM_RESET_ENTRY 0x0000000
+
+#endif // CYGONCE_HAL_PLATFORM_INTS_H
diff --git a/packages/hal/arm/at91/at91sam9/current/include/hal_platform_setup.h b/packages/hal/arm/at91/at91sam9/current/include/hal_platform_setup.h
new file mode 100644
index 0000000..1f9b585
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9/current/include/hal_platform_setup.h
@@ -0,0 +1,166 @@
+#ifndef CYGONCE_HAL_PLATFORM_SETUP_H
+#define CYGONCE_HAL_PLATFORM_SETUP_H
+
+/*=============================================================================
+//
+// hal_platform_setup.h
+//
+// Platform specific support for HAL
+//
+//=============================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+// Copyright (C) 2006 eCosCentric Ltd
+// Copy
+
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//=============================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): gthomas
+// Contributors:gthomas, asl
+// Date: 2006-02-18
+// Purpose: AT91SAM7S platform specific support routines
+// Description:
+// Usage: #include <cyg/hal/hal_platform_setup.h>
+//
+//####DESCRIPTIONEND####
+//
+//===========================================================================*/
+
+#include <cyg/hal/var_io.h>
+#include <cyg/hal/plf_io.h>
+
+// Macro to initialise the Memory Controller
+ .macro _flash_init
+__flash_init__:
+ ldr r0,=AT91_MC
+#if CYGNUM_HAL_ARM_AT91_CLOCK_SPEED > 60000000
+ // When the clock is running faster than 60MHz we need two wait states
+ ldr r1,=(AT91_MC_FMR_2FWS)
+#else
+# if CYGNUM_HAL_ARM_AT91_CLOCK_SPEED > 30000000
+ // When the clock is running faster than 30MHz we need a wait state
+ ldr r1,=(AT91_MC_FMR_1FWS)
+# else
+ // We have a slow clock, no extra wait states are needed
+ ldr r1,=AT91_MC_FMR_0FWS
+# endif
+#endif
+ str r1,[r0,#AT91_MC_FMR]
+#if defined(AT91_MC_FMR1)
+ // If we have a second flash controller we need to set that up as well
+ str r1,[r0,#AT91_MC_FMR1]
+#endif
+ .endm
+
+// Macro to start the main clock.
+ .macro _main_clock_init
+__main_clock_init__:
+ ldr r0,=AT91_PMC
+
+ // Check that we have a stable clock before we start switching
+wait_pmc_sr_0:
+ ldr r1,[r0,#AT91_PMC_SR]
+ ands r1,r1,#AT91_PMC_SR_MCKRDY
+ beq wait_pmc_sr_0
+
+ // Swap to the slow clock, just to be sure.
+ ldr r1,=(AT91_PMC_MCKR_PRES_CLK|AT91_PMC_MCKR_SLOW_CLK)
+ str r1,[r0,#AT91_PMC_MCKR]
+
+#if defined(CYGNUM_HAL_ARM_AT91_CLOCK_TYPE_EXTCLOCK)
+ ldr r1,=(AT91_PMC_MOR_OSCBYPASS)
+#else
+ ldr r1,=(AT91_PMC_MOR_OSCCOUNT(CYGNUM_HAL_ARM_AT91_PMC_MOR_OSCCOUNT)|AT91_PMC_MOR_MOSCEN)
+#endif
+ str r1,[r0,#AT91_PMC_MOR]
+
+ // Wait for oscilator start timeout
+wait_pmc_sr_1:
+ ldr r1,[r0,#AT91_PMC_SR]
+ ands r1,r1,#AT91_PMC_SR_MOSCS
+ beq wait_pmc_sr_1
+
+ // Set the PLL multiplier and divider. 16 slow clocks go by
+ // before the LOCK bit is set. */
+ ldr r1,=((AT91_PMC_PLLR_DIV(CYGNUM_HAL_ARM_AT91_PLL_DIVIDER))|(AT91_PMC_PLLR_PLLCOUNT(CYGNUM_HAL_ARM_AT91_PLL_COUNT))|(AT91_PMC_PLLR_MUL(CYGNUM_HAL_ARM_AT91_PLL_MULTIPLIER-1)))
+ str r1,[r0,#AT91_PMC_PLLR]
+
+ // Wait for PLL locked indication
+wait_pmc_sr_2:
+ ldr r1,[r0,#AT91_PMC_SR]
+ ands r1,r1,#AT91_PMC_SR_LOCK
+ beq wait_pmc_sr_2
+
+ // Enable the PLL clock and set the prescale to 2 */
+ ldr r1,=(AT91_PMC_MCKR_PRES_CLK_2|AT91_PMC_MCKR_PLL_CLK)
+ str r1,[r0,#AT91_PMC_MCKR]
+
+ // Wait for the MCLK ready indication
+wait_pmc_sr_3:
+ ldr r1,[r0,#AT91_PMC_SR]
+ ands r1,r1,#AT91_PMC_SR_MCKRDY
+ beq wait_pmc_sr_3
+ .endm
+
+// Remap the flash from address 0x0 and place RAM there instead.
+ .macro _remap_flash
+__remap_flash:
+ ldr r0,=0x000004 // Use the underfined instruction exception
+ ldr r1,=0x200004
+ ldr r2,[r0] // Save away copies so we can restore them
+ ldr r3,[r1]
+ ldr r4,=0xffffff
+ eor r4,r3,r4 // XOR the contents of 0x20004
+ str r4,[r1] // and write it
+ ldr r5,[r0] // Read from low memory
+ cmp r5,r4
+ beq remap_done
+ ldr r0,=AT91_MC // Need to do a remap
+ ldr r5,=1
+ str r5,[r0,#AT91_MC_RCR]
+remap_done:
+ str r3,[r1] // restore the value we changed
+ .endm
+
+#if defined(CYG_HAL_STARTUP_ROM)
+ .macro _setup
+ _flash_init
+ _main_clock_init
+ _remap_flash
+ .endm
+
+#define PLATFORM_SETUP1 _setup
+#else
+#define PLATFORM_SETUP1
+#endif
+
+//-----------------------------------------------------------------------------
+// end of hal_platform_setup.h
+#endif // CYGONCE_HAL_PLATFORM_SETUP_H
diff --git a/packages/hal/arm/at91/at91sam9/current/include/pkgconf/mlt_arm_at91sam9263ek_ram.h b/packages/hal/arm/at91/at91sam9/current/include/pkgconf/mlt_arm_at91sam9263ek_ram.h
new file mode 100644
index 0000000..88f0d3f
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9/current/include/pkgconf/mlt_arm_at91sam9263ek_ram.h
@@ -0,0 +1,25 @@
+// eCos memory layout - Mon Nov 10 16:00:46 MSK 2008
+
+// This is a generated by hands file - do not edit
+
+#ifndef __ASSEMBLER__
+#include <cyg/infra/cyg_type.h>
+#include <stddef.h>
+
+#endif
+#define CYGMEM_REGION_ram (0x23f00000)
+#define CYGMEM_REGION_ram_SIZE (0x80000)
+#define CYGMEM_REGION_ram_ATTR (CYGMEM_REGION_ATTR_R | CYGMEM_REGION_ATTR_W)
+#define CYGMEM_REGION_rom (0x00100000)
+#define CYGMEM_REGION_rom_SIZE (0x40000)
+#define CYGMEM_REGION_rom_ATTR (CYGMEM_REGION_ATTR_R)
+#ifndef __ASSEMBLER__
+extern char CYG_LABEL_NAME (__reserved_bootmon) [];
+#endif
+#define CYGMEM_SECTION_reserved_bootmon (CYG_LABEL_NAME (__reserved_bootmon))
+#define CYGMEM_SECTION_reserved_bootmon_SIZE (0x01000)
+#ifndef __ASSEMBLER__
+extern char CYG_LABEL_NAME (__heap1) [];
+#endif
+#define CYGMEM_SECTION_heap1 (CYG_LABEL_NAME (__heap1))
+#define CYGMEM_SECTION_heap1_SIZE (0x23f80000 - (size_t) CYG_LABEL_NAME (__heap1))
diff --git a/packages/hal/arm/at91/at91sam9/current/include/pkgconf/mlt_arm_at91sam9263ek_ram.ldi b/packages/hal/arm/at91/at91sam9/current/include/pkgconf/mlt_arm_at91sam9263ek_ram.ldi
new file mode 100644
index 0000000..e6ca3d4
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9/current/include/pkgconf/mlt_arm_at91sam9263ek_ram.ldi
@@ -0,0 +1,29 @@
+// eCos memory layout - Mon Nov 10 16:00:46 MSK 2008
+
+// This is a generated by hands file - do not edit
+
+#include <cyg/infra/cyg_type.inc>
+#include <pkgconf/hal_arm_at91sam9.h>
+
+MEMORY
+{
+ ram : ORIGIN = 0x23f00000, LENGTH = 0x80000
+}
+
+SECTIONS
+{
+ SECTIONS_BEGIN
+// CYG_LABEL_DEFN(__reserved_bootmon) = 0x00000000; . = CYG_LABEL_DEFN(__reserved_bootmon) + 0x01000;
+ SECTION_rom_vectors (ram, 0x23f00400, LMA_EQ_VMA)
+ SECTION_fixed_vectors (ram, 0x23f00600, LMA_EQ_VMA)
+ SECTION_text (ram, ALIGN (0x4), LMA_EQ_VMA)
+ SECTION_fini (ram, ALIGN (0x4), LMA_EQ_VMA)
+ SECTION_rodata (ram, ALIGN (0x4), LMA_EQ_VMA)
+ SECTION_rodata1 (ram, ALIGN (0x4), LMA_EQ_VMA)
+ SECTION_fixup (ram, ALIGN (0x4), LMA_EQ_VMA)
+ SECTION_gcc_except_table (ram, ALIGN (0x4), LMA_EQ_VMA)
+ SECTION_data (ram, ALIGN (0x4), FOLLOWING (.gcc_except_table))
+ SECTION_bss (ram, ALIGN (0x4), LMA_EQ_VMA)
+ CYG_LABEL_DEFN(__heap1) = ALIGN (0x8);
+ SECTIONS_END
+}
\ No newline at end of file
diff --git a/packages/hal/arm/at91/at91sam9/current/include/plf_io.h b/packages/hal/arm/at91/at91sam9/current/include/plf_io.h
new file mode 100644
index 0000000..ec8c4ea
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9/current/include/plf_io.h
@@ -0,0 +1,190 @@
+#ifndef CYGONCE_HAL_PLF_IO_H
+#define CYGONCE_HAL_PLF_IO_H
+//=============================================================================
+//
+// plf_io.h
+//
+// AT91SAM7S board specific registers
+//
+//=============================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//=============================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): tkoeller
+// Contributors: andrew lunn, Oliver Munz
+// Date: 2005-12-31
+// Purpose: Atmel AT91SAM7S board specific registers
+// Description:
+// Usage: #include <cyg/hal/plf_io.h>
+//
+//####DESCRIPTIONEND####
+//
+//=============================================================================
+#include <pkgconf/hal_arm_at91sam9.h>
+
+#define CYGARC_PHYSICAL_ADDRESS(_x_)
+
+//SPI - Serial Peripheral Interface
+#define AT91_SPI0 0xFFFA4000
+#define AT91_SPI1 0xFFFA8000
+
+#define AT91_SPI AT91_SPI0
+
+// DMA registers
+#define AT91_SPI_RPR 0x100 // Receive Pointer Register
+#define AT91_SPI_RCR 0x104 // Receive Counter Register
+#define AT91_SPI_TPR 0x108 // Transmit Pointer Register
+#define AT91_SPI_TCR 0x10C // Transmit Counter Register
+#define AT91_SPI_NRPR 0x110 // Next Receive Pointer Register
+#define AT91_SPI_NRCR 0x114 // Next Receive Counter Register
+#define AT91_SPI_NTPR 0x118 // Next Transmit Pointer Register
+#define AT91_SPI_NTCR 0x11C // Next Transmit Counter Register
+#define AT91_SPI_PTCR 0x120 // PDC Transfer Control Register
+#define AT91_SPI_PTSR 0x124 // PDC Transfer Status Register
+
+
+// Peripheral Input/Output Controllers
+#define AT91_PIOA 0xFFFFF200
+#define AT91_PIOB 0xFFFFF400
+#define AT91_PIOC 0xFFFFF600
+#define AT91_PIOD 0xFFFFF800
+#define AT91_PIOE 0xFFFFFA00
+
+#define AT91_PIO_DBGU AT91_PIOC
+
+// USART
+#define AT91_USART0 0xFFF8C000
+#define AT91_USART1 0xFFF90000
+#define AT91_USART2 0xFFF94000
+
+#define AT91_DBG 0xFFFFEE00
+
+#ifndef __ASSEMBLER__
+#ifdef CYGBLD_HAL_ARM_AT91_BAUD_DYNAMIC
+extern cyg_uint32 hal_at91_us_baud(cyg_uint32 baud);
+#define AT91_US_BAUD(baud) hal_at91_us_baud(baud)
+#endif
+#endif // __ASSEMBLER__
+
+#define AT91_US_RPR 0x100 // Receive Pointer Register
+#define AT91_US_RCR 0x104 // Receive Counter Register
+#define AT91_US_TPR 0x108 // Transmit Pointer Register
+#define AT91_US_TCR 0x10C // Transmit Counter Register
+#define AT91_US_NRPR 0x110 // Next Receive Pointer Register
+#define AT91_US_NRCR 0x114 // Next Receive Counter Register
+#define AT91_US_NTPR 0x118 // Next Transmit Pointer Register
+#define AT91_US_NTCR 0x11C // Next Transmit Counter Register
+#define AT91_US_PTCR 0x120 // PDC Transfer Control Register
+#define AT91_US_PTSR 0x124 // PDC Transfer Status Register
+
+// PIO - Programmable I/O
+
+#define AT91_PIO AT91_PIOA
+
+// TC - Timer Counter
+
+#define AT91_TC 0xFFF7C000
+
+// Power Management Controller
+
+#define AT91_PMC 0xFFFFFC00
+
+#define AT91_PMC_MOR 0x20 // Main Oscillator Register
+#define AT91_PMC_MOR_MOSCEN (1 << 0) // Main Oscillator Enable
+#define AT91_PMC_MOR_OSCBYPASS (1 << 1) // Main Oscillator Bypass
+#define AT91_PMC_MOR_OSCCOUNT(x) (x << 8) // Slow clocks ticks
+#define AT91_PMC_MCFR 0x24 // Main Clock Frequency Register
+#define AT91_PMC_PLLR 0x2c // PLL Register
+#define AT91_PMC_PLLR_DIV(x) ((x) << 0) // PLL Devide
+#define AT91_PMC_PLLR_PLLCOUNT(x) ((x) << 8) // PLL Count
+#define AT91_PMC_PLLR_MUL(x) ((x) << 16) // PLL Devide
+#define AT91_PMC_PLLR_OUT_0 (0 << 14)
+#define AT91_PMC_PLLR_OUT_1 (1 << 14)
+#define AT91_PMC_PLLR_OUT_2 (2 << 14)
+#define AT91_PMC_PLLR_OUT_3 (3 << 14)
+#define AT91_PMC_PLLR_USBDIV_0 (0 << 28) // USB clock is PLL clock / 1
+#define AT91_PMC_PLLR_USBDIV_1 (1 << 28) // USB clock is PLL clock / 2
+#define AT91_PMC_PLLR_USBDIV_2 (2 << 28) // USB clock is PLL clock / 4
+#define AT91_PMC_MCKR 0x30 // Master Clock Register
+#define AT91_PMC_MCKR_SLOW_CLK (0 << 0) // Slow clock selected
+#define AT91_PMC_MCKR_MAIN_CLK (1 << 0) // Main clock selected
+#define AT91_PMC_MCKR_PLL_CLK (3 << 0) // PLL clock selected
+#define AT91_PMC_MCKR_PRES_CLK (0 << 2) // divide by 1
+#define AT91_PMC_MCKR_PRES_CLK_2 (1 << 2) // divide by 2
+#define AT91_PMC_MCKR_PRES_CLK_4 (2 << 2) // divide by 4
+#define AT91_PMC_MCKR_PRES_CLK_8 (3 << 2) // divide by 8
+#define AT91_PMC_MCKR_PRES_CLK_16 (4 << 2) // divide by 16
+#define AT91_PMC_MCKR_PRES_CLK_32 (5 << 2) // divide by 32
+#define AT91_PMC_MCKR_PRES_CLK_64 (6 << 2) // divide by 64
+#define AT91_PMC_PCKR0 0x40 // Programmable Clock Register 0
+#define AT91_PMC_PCKR1 0x44 // Programmable Clock Register 1
+#define AT91_PMC_PCKR2 0x48 // Programmable Clock Register 2
+#define AT91_PMC_IER 0x60 // Interrupt Enable Register
+#define AT91_PMC_IDR 0x64 // Interrupt Disable Register
+#define AT91_PMC_SR 0x68 // Status Register
+#define AT91_PMC_SR_MOSCS (1 << 0) // Main oscillator stable
+#define AT91_PMC_SR_LOCK (1 << 2) // PLL Locked
+#define AT91_PMC_SR_MCKRDY (1 << 3) // MCK is ready to be enabled
+#define AT91_PMC_SR_PCK0RDY (1 << 8) // Pad clock 0 is ready to be enabled
+#define AT91_PMC_SR_PCK1RDY (1 << 9) // Pad clock 1 is ready to be enabled
+#define AT91_PMC_SR_PCK2RDY (1 << 10) // Pad clock 2 is ready to be enabled
+#define AT91_PMC_SR_PCK3RDY (1 << 11) // Pad clock 3 is ready to be enabled
+#define AT91_PMC_IMR 0x6c // Interrupt Mask Register
+
+
+
+// EMAC - Ethernet Medium Access Controller
+
+#define AT91_EMAC 0xFFFBC000
+
+// CAN - Controller Area Network
+
+#define AT91_CAN 0xFFFAC000
+
+//----------------------------------------------------------------------
+// The platform needs this initialization during the
+// hal_hardware_init() function in the varient HAL.
+#ifndef __ASSEMBLER__
+extern void hal_plf_hardware_init(void);
+#define HAL_PLF_HARDWARE_INIT() \
+ hal_plf_hardware_init()
+
+#ifdef CYGHWR_HAL_ARM_AT91SAM7X
+extern void hal_plf_eth_init(void);
+#define HAL_PLF_ETH_INIT() \
+ hal_plf_eth_init()
+#endif
+
+#endif //__ASSEMBLER__
+
+#endif //CYGONCE_HAL_PLF_IO_H
+
diff --git a/packages/hal/arm/at91/at91sam9/current/misc/redboot_RAM.ecm b/packages/hal/arm/at91/at91sam9/current/misc/redboot_RAM.ecm
new file mode 100644
index 0000000..b7f956e
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9/current/misc/redboot_RAM.ecm
@@ -0,0 +1,82 @@
+cdl_savefile_version 1;
+cdl_savefile_command cdl_savefile_version {};
+cdl_savefile_command cdl_savefile_command {};
+cdl_savefile_command cdl_configuration { description hardware template package };
+cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
+cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
+cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
+cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
+
+cdl_configuration eCos {
+ description "" ;
+ hardware at91sam7s ;
+ template redboot ;
+ package -hardware CYGPKG_HAL_ARM current ;
+ package -hardware CYGPKG_HAL_ARM_AT91 current ;
+ package -hardware CYGPKG_DEVS_FLASH_AT91 current ;
+ package -template CYGPKG_HAL current ;
+ package -template CYGPKG_INFRA current ;
+ package -template CYGPKG_REDBOOT current ;
+ package CYGPKG_IO_FLASH current ;
+};
+
+cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
+ user_value 6144
+};
+
+cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
+ user_value 0
+};
+
+cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
+ inferred_value 0
+};
+
+cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
+ inferred_value 1
+};
+
+cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
+ inferred_value 0 0
+};
+
+cdl_component CYGBLD_BUILD_REDBOOT {
+ user_value 1
+};
+
+cdl_option CYGOPT_REDBOOT_FIS {
+ user_value 0
+};
+
+cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
+ user_value 0
+};
+
+cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
+ user_value 0
+};
+
+cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
+ user_value -16
+};
+
+
+cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
+ user_value 0
+};
+
+cdl_option CYGBLD_DEV_FLASH_AT91_LOCKING {
+ user_value 0
+};
+
+cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
+ user_value -24
+};
+
+cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
+ user_value 0x15000
+};
+
+cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
+ user_value 1
+};
\ No newline at end of file
diff --git a/packages/hal/arm/at91/at91sam9/current/misc/redboot_ROM.ecm b/packages/hal/arm/at91/at91sam9/current/misc/redboot_ROM.ecm
new file mode 100644
index 0000000..e18ee4b
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9/current/misc/redboot_ROM.ecm
@@ -0,0 +1,90 @@
+cdl_savefile_version 1;
+cdl_savefile_command cdl_savefile_version {};
+cdl_savefile_command cdl_savefile_command {};
+cdl_savefile_command cdl_configuration { description hardware template package };
+cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
+cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
+cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
+cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
+
+cdl_configuration eCos {
+ description "" ;
+ hardware at91sam7s ;
+ template redboot ;
+ package -hardware CYGPKG_HAL_ARM current ;
+ package -hardware CYGPKG_HAL_ARM_AT91 current ;
+ package -hardware CYGPKG_DEVS_FLASH_AT91 current ;
+ package -template CYGPKG_HAL current ;
+ package -template CYGPKG_INFRA current ;
+ package -template CYGPKG_REDBOOT current ;
+ package CYGPKG_IO_FLASH current ;
+};
+
+cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
+ user_value 6144
+};
+
+cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
+ user_value 0
+};
+
+cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
+ inferred_value 0
+};
+
+cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
+ inferred_value 1
+};
+
+cdl_option CYGSEM_HAL_ROM_MONITOR {
+ inferred_value 1
+};
+
+cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
+ inferred_value 0 0
+};
+
+cdl_component CYG_HAL_STARTUP {
+ user_value ROM
+};
+
+cdl_component CYGBLD_BUILD_REDBOOT {
+ user_value 1
+};
+
+cdl_option CYGOPT_REDBOOT_FIS {
+ user_value 0
+};
+
+cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
+ user_value 0
+};
+
+cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
+ user_value 0
+};
+
+cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
+ user_value -16
+};
+
+
+cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
+ user_value 0
+};
+
+cdl_option CYGBLD_DEV_FLASH_AT91_LOCKING {
+ user_value 0
+};
+
+cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
+ user_value -24
+};
+
+cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
+ user_value 0x15000
+};
+
+cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
+ user_value 1
+};
\ No newline at end of file
diff --git a/packages/hal/arm/at91/at91sam9/current/src/at91sam9_misc.c b/packages/hal/arm/at91/at91sam9/current/src/at91sam9_misc.c
new file mode 100644
index 0000000..932f2d9
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9/current/src/at91sam9_misc.c
@@ -0,0 +1,176 @@
+/*==========================================================================
+//
+// at91sam9_misc.c
+//
+// HAL misc board support code for Atmel AT91sam9
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+// Copyright (C) 2003 Nick Garnett <nickg@calivar.com>
+// Copyright (C) 2006 eCosCentric Ltd
+// Copyright (C) 2006 Andrew Lunn <andrew.lunn@ascom.ch>
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): gthomas
+// Contributors: gthomas, jskov, nickg, tkoeller, Oliver Munz, Andrew Lunn, Evgeniy Dushistov
+// Date: 2001-07-12
+// Purpose: HAL board support
+// Description: Implementations of HAL board interfaces
+//
+//####DESCRIPTIONEND####
+//
+//========================================================================*/
+
+#include <pkgconf/system.h>
+#include <pkgconf/hal.h>
+
+#include <cyg/infra/cyg_type.h> // base types
+#include <cyg/infra/cyg_trac.h> // tracing macros
+#include <cyg/infra/cyg_ass.h> // assertion macros
+
+#include <cyg/hal/hal_io.h> // IO macros
+#include <cyg/hal/hal_arch.h> // Register state info
+#include <cyg/hal/hal_diag.h>
+#include <cyg/hal/hal_intr.h> // necessary?
+#include <cyg/hal/hal_cache.h>
+#include <cyg/hal/hal_if.h> // calling interface
+#include <cyg/hal/hal_misc.h> // helper functions
+#ifdef CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
+#include <cyg/hal/drv_api.h> // HAL ISR support
+#endif
+
+extern void hal_at91_led(int val);
+
+void
+hal_at91_set_leds (int val)
+{
+ hal_at91_led(val);
+}
+
+// -------------------------------------------------------------------------
+// Hardware init
+
+void hal_plf_hardware_init (void)
+{
+ /* Enable the Serial devices to driver the serial port pins */
+ HAL_ARM_AT91_PIO_CFG(AT91_USART_RXD0);
+ HAL_ARM_AT91_PIO_CFG(AT91_USART_TXD0);
+ HAL_ARM_AT91_PIO_CFG(AT91_DBG_DTXD);
+ HAL_ARM_AT91_PIO_CFG(AT91_DBG_DRXD);
+
+ /* Enable the Serial devices to driver the serial port pins */
+ HAL_ARM_AT91_PIO_CFG(AT91_USART_RXD1);
+ HAL_ARM_AT91_PIO_CFG(AT91_USART_TXD1);
+
+
+ /* Setup the Reset controller. Allow user resets */
+ HAL_WRITE_UINT32(AT91_RST+AT91_RST_RMR,
+ AT91_RST_RMR_URSTEN |
+ 10 << 8 |
+ AT91_RST_RMR_KEY);
+
+#ifdef CYGBLD_HAL_ARM_AT91_SERIAL_UART
+ /* Enable peripheral clocks for USART 0 and 1 if they are to be used */
+ HAL_WRITE_UINT32(AT91_PMC+AT91_PMC_PCER,
+ AT91_PMC_PCER_US0 |
+ AT91_PMC_PCER_US1);
+#endif
+
+#ifdef CYGBLD_HAL_ARM_AT91_TIMER_TC
+ /* Enable peripheral clocks for TC 0 and 1 if they are to be used */
+ HAL_WRITE_UINT32(AT91_PMC+AT91_PMC_PCER,
+ AT91_PMC_PCER_TC0 |
+ AT91_PMC_PCER_TC2);
+#endif
+
+#ifndef CYGPKG_IO_WATCHDOG
+ /* Disable the watchdog. The eCos philosophy is that the watchdog is
+ disabled unless the watchdog driver is used to enable it.
+ Whoever if we disable it here we cannot re-enable it in the
+ watchdog driver, hence the conditional compilation. */
+ HAL_WRITE_UINT32(AT91_WDTC + AT91_WDTC_WDMR, AT91_WDTC_WDMR_DIS);
+#endif
+
+/* Perform some platform specific bits to get the Ethernet hardware
+ setup. Specifically if a specific phy is used and does not start in
+ the correct mode a function needs to be supplied as part of the plf
+ to do the necessary initializations.
+*/
+#ifdef CYGPKG_DEVS_ETH_ARM_AT91
+#ifdef HAL_PLF_ETH_INIT
+ HAL_PLF_ETH_INIT();
+#endif
+#endif
+}
+
+// Calculate the baud value to be programmed into the serial port baud
+// rate generators. This function will determine what the clock speed
+// is that is driving the generator so it can be used in situations
+// when the application dynamically changes the clock speed.
+cyg_uint32
+hal_at91_us_baud(cyg_uint32 baud_rate)
+{
+ cyg_uint32 val, pll;
+ cyg_uint32 main_clock = 0;
+ cyg_uint32 baud_value = 0;
+
+ HAL_READ_UINT32((AT91_PMC+AT91_PMC_MCKR), val);
+ switch (val & 0x03) {
+ /* Slow clock */
+ case AT91_PMC_MCKR_SLOW_CLK:
+ main_clock = CYGNUM_HAL_ARM_AT91_SLOW_CLOCK;
+ break;
+
+ /* Main clock */
+ case AT91_PMC_MCKR_MAIN_CLK:
+ main_clock = CYGNUM_HAL_ARM_AT91_CLOCK_OSC_MAIN;
+ break;
+ /* PLL */
+ case AT91_PMC_MCKR_PLL_CLK:
+ HAL_READ_UINT32((AT91_PMC+AT91_PMC_PLLR), pll);
+ main_clock = CYGNUM_HAL_ARM_AT91_CLOCK_OSC_MAIN *
+ (((pll & 0x7FF0000) >> 16) + 1) / (pll & 0xFF);
+ break;
+ }
+
+ // Process prescale
+ val = (val & 0x1C) >> 2;
+ main_clock = main_clock >> val;
+
+ /* Define the baud rate divisor register, (round) */
+ baud_value = (main_clock/(8*baud_rate)+1)/2;
+
+ return baud_value;
+}
+
+//--------------------------------------------------------------------------
+// EOF at91sam7s_misc.c
diff --git a/packages/hal/arm/at91/at91sam9263ek/current/cdl/hal_arm_at91sam9263ek.cdl b/packages/hal/arm/at91/at91sam9263ek/current/cdl/hal_arm_at91sam9263ek.cdl
new file mode 100644
index 0000000..55b83ae
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9263ek/current/cdl/hal_arm_at91sam9263ek.cdl
@@ -0,0 +1,69 @@
+# ====================================================================
+#
+# hal_arm_at91sam9263ek.cdl
+#
+# ARM AT91 SAM9263 EK development board package configuration data
+#
+# ====================================================================
+#####ECOSGPLCOPYRIGHTBEGIN####
+## Copyright (C) 2008 Evgeniy Dushistov
+##
+## eCos is free software; you can redistribute it and/or modify it under
+## the terms of the GNU General Public License as published by the Free
+## Software Foundation; either version 2 or (at your option) any later version.
+##
+## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+## WARRANTY; without even the implied warranty of MERCHANTABILITY or
+## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+## for more details.
+##
+## You should have received a copy of the GNU General Public License along
+## with eCos; if not, write to the Free Software Foundation, Inc.,
+## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+##
+## As a special exception, if other files instantiate templates or use macros
+## or inline functions from this file, or you compile this file and link it
+## with other works to produce a work based on this file, this file does not
+## by itself cause the resulting work to be covered by the GNU General Public
+## License. However the source code for this file must still be made available
+## in accordance with section (3) of the GNU General Public License.
+##
+## This exception does not invalidate any other reasons why a work based on
+## this file might be covered by the GNU General Public License.
+## -------------------------------------------
+#####ECOSGPLCOPYRIGHTEND####
+# ====================================================================
+######DESCRIPTIONBEGIN####
+#
+# Author(s):
+# Contributors:
+# Date:
+#
+#####DESCRIPTIONEND####
+#
+# ====================================================================
+
+cdl_package CYGPKG_HAL_ARM_AT91SAM9263EK {
+ display "Atmel AT91SAM9263-EK development board"
+ parent CYGPKG_HAL_ARM_AT91SAM9
+ define_header hal_arm_at91sam9263ek.h
+ include_dir cyg/hal
+ hardware
+ description "
+ The AT91SAM9263EK HAL package provides the support needed to run
+ eCos on an Atmel AT91SAM9263-EK development board."
+
+ compile at91sam9263ek_misc.c
+
+ requires { CYGHWR_HAL_ARM_AT91 == "AT91SAM9" }
+
+ define_proc {
+ puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_arm_at91sam9263ek.h>"
+ puts $::cdl_header "/***** proc output start *****/"
+ puts $::cdl_header "#include <pkgconf/hal_arm_at91sam9263ek.h>"
+ puts $::cdl_header "#define HAL_PLATFORM_CPU \"ARM926EJ-S\""
+ puts $::cdl_header "#define HAL_PLATFORM_BOARD \"Atmel (AT91SAM9263-EK)\""
+ puts $::cdl_header "#define HAL_PLATFORM_EXTRA \"\""
+ puts $::cdl_header "/****** proc output end ******/"
+ }
+}
\ No newline at end of file
diff --git a/packages/hal/arm/at91/at91sam9263ek/current/src/at91sam9263ek_misc.c b/packages/hal/arm/at91/at91sam9263ek/current/src/at91sam9263ek_misc.c
new file mode 100644
index 0000000..001b3ed
--- /dev/null
+++ b/packages/hal/arm/at91/at91sam9263ek/current/src/at91sam9263ek_misc.c
@@ -0,0 +1,27 @@
+//! \todo reaaly need this file?
+#include <pkgconf/system.h>
+#include <pkgconf/hal.h>
+
+#include <cyg/hal/hal_io.h> // IO macros
+
+
+// The development board has four LEDs
+void
+hal_at91_led (int val)
+{
+ HAL_ARM_AT91_GPIO_CFG_DIRECTION(AT91_GPIO_PA0, AT91_PIN_OUT);
+ HAL_ARM_AT91_GPIO_CFG_DIRECTION(AT91_GPIO_PA1, AT91_PIN_OUT);
+ HAL_ARM_AT91_GPIO_CFG_DIRECTION(AT91_GPIO_PA2, AT91_PIN_OUT);
+ HAL_ARM_AT91_GPIO_CFG_DIRECTION(AT91_GPIO_PA3, AT91_PIN_OUT);
+
+ HAL_ARM_AT91_GPIO_CFG_PULLUP(AT91_GPIO_PA0, AT91_PIN_PULLUP_DISABLE);
+ HAL_ARM_AT91_GPIO_CFG_PULLUP(AT91_GPIO_PA1, AT91_PIN_PULLUP_DISABLE);
+ HAL_ARM_AT91_GPIO_CFG_PULLUP(AT91_GPIO_PA2, AT91_PIN_PULLUP_DISABLE);
+ HAL_ARM_AT91_GPIO_CFG_PULLUP(AT91_GPIO_PA3, AT91_PIN_PULLUP_DISABLE);
+
+ // Set the bits. The logic is inverted
+ HAL_ARM_AT91_GPIO_PUT(AT91_GPIO_PA0, !(val & 1));
+ HAL_ARM_AT91_GPIO_PUT(AT91_GPIO_PA1, !(val & 2));
+ HAL_ARM_AT91_GPIO_PUT(AT91_GPIO_PA2, !(val & 4));
+ HAL_ARM_AT91_GPIO_PUT(AT91_GPIO_PA3, !(val & 8));
+}
diff --git a/packages/hal/arm/at91/var/current/cdl/hal_arm_at91.cdl b/packages/hal/arm/at91/var/current/cdl/hal_arm_at91.cdl
index cf9c9f0..fcdad5d 100644
--- a/packages/hal/arm/at91/var/current/cdl/hal_arm_at91.cdl
+++ b/packages/hal/arm/at91/var/current/cdl/hal_arm_at91.cdl
@@ -65,7 +65,6 @@ cdl_package CYGPKG_HAL_ARM_AT91 {
implements CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
implements CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
implements CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
- implements CYGINT_HAL_ARM_ARCH_ARM7
implements CYGINT_HAL_ARM_THUMB_ARCH
# Let the architectural HAL see this variant's files
@@ -79,7 +78,7 @@ cdl_package CYGPKG_HAL_ARM_AT91 {
flavor data
default_value {"R40807"}
legal_values {"R40807" "R40008" "M42800A" "M55800A" "JTST"
- "AT91SAM7S" }
+ "AT91SAM7S" "AT91SAM9"}
description "The AT91 microcontroller family has several variants,
the main differences being the amount of on-chip SRAM,
peripherals and their layout. This option allows the
@@ -87,6 +86,20 @@ cdl_package CYGPKG_HAL_ARM_AT91 {
being used."
}
+ cdl_option CYGHWR_HAL_ARM_AT91_ARM7 {
+ display "ARM7 core"
+ no_define
+ calculated { is_substr("R40807 R40008 M42800A M55800A JTST AT91SAM7S", CYGHWR_HAL_ARM_AT91) }
+ implements CYGINT_HAL_ARM_ARCH_ARM7
+ }
+
+ cdl_option CYGHWR_HAL_ARM_AT91_ARM9 {
+ display "ARM9 core"
+ no_define
+ calculated { is_substr("AT91SAM9", CYGHWR_HAL_ARM_AT91) }
+ implements CYGINT_HAL_ARM_ARCH_ARM9
+ }
+
cdl_option CYGHWR_HAL_ARM_AT91_FIQ {
display "handle FIQ as an IRQ"
flavor bool
diff --git a/packages/hal/arm/at91/var/current/include/var_arch.h b/packages/hal/arm/at91/var/current/include/var_arch.h
index 4f906f3..d32fc2f 100644
--- a/packages/hal/arm/at91/var/current/include/var_arch.h
+++ b/packages/hal/arm/at91/var/current/include/var_arch.h
@@ -75,7 +75,8 @@ CYG_MACRO_END
#elif defined(CYGHWR_HAL_ARM_AT91_M42800A) || \
defined(CYGHWR_HAL_ARM_AT91_M55800A) || \
- defined(CYGHWR_HAL_ARM_AT91SAM7)
+ defined(CYGHWR_HAL_ARM_AT91SAM7) || \
+ defined(CYGPKG_HAL_ARM_AT91SAM9263EK) \
#define HAL_IDLE_THREAD_ACTION(_count_) \
CYG_MACRO_START \
diff --git a/packages/hal/arm/at91/var/current/include/var_io.h b/packages/hal/arm/at91/var/current/include/var_io.h
index 404fb68..ed7cffa 100644
--- a/packages/hal/arm/at91/var/current/include/var_io.h
+++ b/packages/hal/arm/at91/var/current/include/var_io.h
@@ -167,6 +167,10 @@
#define AT91_PIO 0xFFFF0000
#endif
+#ifndef AT91_PIO_DBGU
+#define AT91_PIO_DBGU AT91_PIO
+#endif
+
#define AT91_PIN(_ctrl_, _periph_, _pin_) \
((_ctrl_ << 16) | (_periph_ << 8) | (_pin_))
@@ -1142,6 +1146,21 @@
#endif // CYGHWR_HAL_ARM_AT91SAM7SE
+#elif defined (CYGHWR_HAL_ARM_AT91SAM9)
+#include <pkgconf/hal_arm_at91sam9.h>
+
+#define AT91_USART_RXD0 AT91_PIN(0,0,27) // USART 0 Receive Data
+#define AT91_USART_TXD0 AT91_PIN(0,0,26) // USART 0 Transmit Data
+#define AT91_USART_RTS0 AT91_PIN(0,0,28) // USART 0 Ready To Send
+#define AT91_USART_CTS0 AT91_PIN(0,0,29) // USART 0 Clear To Send
+#define AT91_DBG_DRXD AT91_PIN(2,0,30) // Debug UART Receive
+#define AT91_DBG_DTXD AT91_PIN(2,0,31) // Debug UART Transmit
+#define AT91_USART_TXD1 AT91_PIN(3,0,0) // USART 1 transmit data
+#define AT91_USART_RXD1 AT91_PIN(3,0,1) // USART 1 receive data
+#define AT91_PIO_PSR_DRXD (1 << 30)
+#define AT91_PIO_PSR_DTXD (1 << 31)
+
+//end #elif defined (CYGHWR_HAL_ARM_AT91SAM9)
#else
#define AT91_TC_TCLK0 AT91_PIN(0,0, 0) // Timer #0 clock
#define AT91_TC_TIOA0 AT91_PIN(0,0, 1) // Timer #0 signal A
@@ -1213,7 +1232,7 @@
#define AT91_PIO_IMR 0x48 // Interrupt mask
#define AT91_PIO_ISR 0x4C // Interrupt status
-#if defined(CYGHWR_HAL_ARM_AT91SAM7)
+#if defined(CYGHWR_HAL_ARM_AT91SAM7) || defined(CYGHWR_HAL_ARM_AT91SAM9)
#define AT91_PIO_MDER 0x50 // Multi-drive Enable Register
#define AT91_PIO_MDDR 0x54 // Multi-drive Disable Register
#define AT91_PIO_MDSR 0x58 // Multi-drive Status Register
@@ -1613,7 +1632,8 @@
#elif defined(CYGHWR_HAL_ARM_AT91_M42800A) || \
defined(CYGHWR_HAL_ARM_AT91_M55800A) || \
- defined(CYGHWR_HAL_ARM_AT91SAM7)
+ defined(CYGHWR_HAL_ARM_AT91SAM7) || \
+ defined(CYGHWR_HAL_ARM_AT91SAM9)
// (Advanced) Power Management
@@ -1775,6 +1795,33 @@
#define AT91_PMC_PCER_TC0 (1 <<12) // Timer Counter 0
#define AT91_PMC_PCER_TC1 (1 <<13) // Timer Counter 1
#define AT91_PMC_PCER_TC2 (1 <<14) // Timer Counter 2
+#elif defined(CYGHWR_HAL_ARM_AT91SAM9)
+
+#define AT91_PMC_PCER_PIOA (1 << 2)
+#define AT91_PMC_PCER_PIOB (1 << 3)
+#define AT91_PMC_PCER_PIOCDE (1 << 4)
+#define AT91_PMC_PCER_US0 (1 << 7)
+#define AT91_PMC_PCER_US1 (1 << 8)
+#define AT91_PMC_PCER_US2 (1 << 9)
+#define AT91_PMC_PCER_MCI0 (1 << 10)
+#define AT91_PMC_PCER_MCI1 (1 << 11)
+#define AT91_PMC_PCER_CAN (1 << 12)
+#define AT91_PMC_PCER_TWI (1 << 13)
+#define AT91_PMC_PCER_SPI0 (1 << 14)
+#define AT91_PMC_PCER_SPI1 (1 << 15)
+#define AT91_PMC_PCER_SSC0 (1 << 16)
+#define AT91_PMC_PCER_SSC1 (1 << 17)
+#define AT91_PMC_PCER_AC97C (1 << 18)
+#define AT91_PMC_PCER_TC0 (1 << 19)
+#define AT91_PMC_PCER_TC1 (1 << 19)
+#define AT91_PMC_PCER_TC2 (1 << 19)
+#define AT91_PMC_PCER_PWMC (1 << 20)
+#define AT91_PMC_PCER_EMAC (1 << 21)
+#define AT91_PMC_PCER_2DGE (1 << 23)
+#define AT91_PMC_PCER_UDP (1 << 24)
+#define AT91_PMC_PCER_ISI (1 << 25)
+#define AT91_PMC_PCER_LCDC (1 << 26)
+#define AT91_PMC_PCER_DMA (1 << 27)
#elif defined(CYGHWR_HAL_ARM_AT91SAM7X)
#define AT91_PMC_SCER_PCK (1 << 0) // Processor Clock
@@ -1932,7 +1979,7 @@
//=============================================================================
// Watchdog Timer Controller
-#if defined(CYGHWR_HAL_ARM_AT91SAM7)
+#if defined(CYGHWR_HAL_ARM_AT91SAM7) || defined(CYGHWR_HAL_ARM_AT91SAM9)
#ifndef AT91_WDTC
#define AT91_WDTC 0xFFFFFD40
@@ -1957,7 +2004,7 @@
//=============================================================================
// Reset Controller
-#if defined(CYGHWR_HAL_ARM_AT91SAM7)
+#if defined(CYGHWR_HAL_ARM_AT91SAM7) || defined(CYGHWR_HAL_ARM_AT91SAM9)
#ifndef AT91_RST
#define AT91_RST 0xFFFFFD00
@@ -2085,7 +2132,7 @@
//=============================================================================
// Debug Unit
-#if defined(CYGHWR_HAL_ARM_AT91SAM7)
+#if defined(CYGHWR_HAL_ARM_AT91SAM7) || defined(CYGHWR_HAL_ARM_AT91SAM9)
#ifndef AT91_DBG
#define AT91_DBG 0xFFFFF200
@@ -2201,7 +2248,7 @@
//=============================================================================
// Periodic Interval Timer Controller
-#if defined(CYGHWR_HAL_ARM_AT91SAM7)
+#if defined(CYGHWR_HAL_ARM_AT91SAM7) || defined(CYGHWR_HAL_ARM_AT91SAM9)
#ifndef AT91_PITC
#define AT91_PITC 0xfffffd30
@@ -2220,7 +2267,7 @@
//=============================================================================
// Real Time Timer Controller
-#if defined(CYGHWR_HAL_ARM_AT91SAM7)
+#if defined(CYGHWR_HAL_ARM_AT91SAM7) || defined(CYGHWR_HAL_ARM_AT91SAM9)
#ifndef AT91_RTTC
#define AT91_RTTC 0xFFFFFD20
@@ -3187,7 +3234,7 @@
HAL_ARM_AT91_GPIOX_GET(_pin_, _value_, 0, AT91_PIO); \
HAL_ARM_AT91_GPIOX_GET(_pin_, _value_, 1, AT91_PIOB); \
CYG_MACRO_END
-#else
+#elif !defined(AT91_PIOD)
//----------------------
// Three PIO controllers
//----------------------
@@ -3247,7 +3294,62 @@
HAL_ARM_AT91_GPIOX_GET(_pin_, _value_, 1, AT91_PIOB); \
HAL_ARM_AT91_GPIOX_GET(_pin_, _value_, 2, AT91_PIOC); \
CYG_MACRO_END
-#endif //!AT91_PIOB
+#else
+#ifdef CYGHWR_HAL_ARM_AT91SAM9
+//----------------------
+// More Three PIO controllers
+//----------------------
+// Configure a peripheral pin for peripheral operation
+#define HAL_ARM_AT91_PIO_CFG(_pin_) \
+ CYG_MACRO_START \
+ cyg_uint32 _pctrl_ = HAL_ARM_AT91_PIO_CTRL(_pin_); \
+ HAL_ARM_AT91_PIOX_CFG(_pin_, _pctrl_, (AT91_PIO + (_pctrl_ << 9))); \
+ CYG_MACRO_END
+
+// Configure a GPIO pin direction
+#define HAL_ARM_AT91_GPIO_CFG_DIRECTION(_pin_, _dir_) \
+ CYG_MACRO_START \
+ cyg_uint32 _pctrl_ = HAL_ARM_AT91_PIO_CTRL(_pin_); \
+ HAL_ARM_AT91_GPIOX_CFG_DIRECTION(_pin_, _dir_, _pctrl_, (AT91_PIO + (_pctrl_ << 9))); \
+ CYG_MACRO_END
+
+// Configure a GPIO pin pullup resistor
+#define HAL_ARM_AT91_GPIO_CFG_PULLUP(_pin_, _enable_) \
+ CYG_MACRO_START \
+ cyg_uint32 _pctrl_ = HAL_ARM_AT91_PIO_CTRL(_pin_); \
+ HAL_ARM_AT91_GPIOX_CFG_PULLUP(_pin_, _enable_, _pctrl_, (AT91_PIO + (_pctrl_ << 9))); \
+ CYG_MACRO_END
+
+// Configure a GPIO pin to generate interrupts
+#define HAL_ARM_AT91_GPIO_CFG_INTERRUPT(_pin_, _enable_) \
+ CYG_MACRO_START \
+ cyg_uint32 _pctrl_ = HAL_ARM_AT91_PIO_CTRL(_pin_); \
+ HAL_ARM_AT91_GPIOX_CFG_INTERRUPT(_pin_, _enable_, _pctrl_, (AT91_PIO + (_pctrl_ << 9))); \
+ CYG_MACRO_END
+
+// Set a GPIO pin to 1
+#define HAL_ARM_AT91_GPIO_SET(_pin_) \
+ CYG_MACRO_START \
+ cyg_uint32 _pctrl_ = HAL_ARM_AT91_PIO_CTRL(_pin_); \
+ HAL_ARM_AT91_GPIOX_SET(_pin_, _pctrl_, (AT91_PIO + (_pctrl_ << 9))); \
+ CYG_MACRO_END
+
+// Reset a GPIO pin to 0
+#define HAL_ARM_AT91_GPIO_RESET(_pin_) \
+ CYG_MACRO_START \
+ cyg_uint32 _pctrl_ = HAL_ARM_AT91_PIO_CTRL(_pin_); \
+ HAL_ARM_AT91_GPIOX_RESET(_pin_, _pctrl_, (AT91_PIO + (_pctrl_ << 9))); \
+ CYG_MACRO_END
+
+// Get the state of a GPIO pin
+#define HAL_ARM_AT91_GPIO_GET(_pin_, _value_) \
+ CYG_MACRO_START \
+ cyg_uint32 _pctrl_ = HAL_ARM_AT91_PIO_CTRL(_pin_); \
+ HAL_ARM_AT91_GPIOX_GET(_pin_, _value_, _pctrl_, (AT91_PIO + (_pctrl_ << 9))); \
+ CYG_MACRO_END
+#endif //! CYGHWR_HAL_ARM_AT91SAM9
+
+#endif //!AT91_PIOD
// Put a GPIO pin to a given state
#define HAL_ARM_AT91_GPIO_PUT(_pin_, _state_) \
diff --git a/packages/hal/arm/at91/var/current/src/hal_diag_dbg.c b/packages/hal/arm/at91/var/current/src/hal_diag_dbg.c
index 831a5f6..f1a24d7 100644
--- a/packages/hal/arm/at91/var/current/src/hal_diag_dbg.c
+++ b/packages/hal/arm/at91/var/current/src/hal_diag_dbg.c
@@ -86,13 +86,13 @@ cyg_hal_plf_serial_dbg_init_channel(void* __ch_data)
cyg_uint32 baud_rate = ((channel_data_t*)__ch_data)->baud_rate;
/* Enable pins to be driven by peripheral, using peripheral A. */
- HAL_WRITE_UINT32((AT91_PIO+AT91_PIO_ASR),
+ HAL_WRITE_UINT32((AT91_PIO_DBGU+AT91_PIO_ASR),
(AT91_PIO_PSR_DRXD |
AT91_PIO_PSR_DTXD));
/* Disables the PIO from controlling the corresponding pin
(enables peripheral control of the pin). */
- HAL_WRITE_UINT32((AT91_PIO+AT91_PIO_PDR),
+ HAL_WRITE_UINT32((AT91_PIO_DBGU+AT91_PIO_PDR),
(AT91_PIO_PSR_DRXD |
AT91_PIO_PSR_DTXD));
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: at91sam9263ek
2008-11-10 9:21 ` at91sam9263ek Andrew Lunn
2008-11-11 18:55 ` [PATCH] [RFC] at91sam9263ek support Evgeniy Dushistov
@ 2008-11-18 16:38 ` Jonathan Larmour
2008-11-25 20:51 ` at91sam9263ek Evgeniy Dushistov
1 sibling, 1 reply; 12+ messages in thread
From: Jonathan Larmour @ 2008-11-18 16:38 UTC (permalink / raw)
To: Andrew Lunn; +Cc: Evgeniy Dushistov, ecos-devel
Andrew Lunn wrote:
> On Thu, Nov 06, 2008 at 09:23:28PM +0300, Evgeniy Dushistov wrote:
>> Hi,
>>
>> I want to see working ecos on at91sam9263ek board.
>> As far as I know, there is no freely available source code of ecos port on
>> this hardware, am I right? (I know about ecoscentric, but it is not
>> freely available).
>>
>> May be anybody is working on such kind of port?
>>
>> Right now I'm reading docs about cdl language, and stuck on which
>> variant to choose: create directory at91sam9 in
>> packages/hal/arm/arm9 and write hal package from scratch
>> or use packages/hal/arm/at91 stuff, at91sam9263ek is very similar
>> to at91sam7s,
I don't think it's that similar. At least, it seems similar at a
high-level, but differs in most of the details once you get into it. The
register layouts differ in many places between the SAM9 variants even. I
think you'd end up with huge amounts of ifdefs.
I recommend the former approach. If there is anything that can sensibly be
shared, perhaps it could be broken out into a separate package.
>> but
>> packages/hal/arm/at91/var/current/cdl/hal_arm_at91.cdl
>> contain things like "implements CYGINT_HAL_ARM_ARCH_ARM7",
>> may be someone, who has more experience than I (i.e. > 0) with ecos
>> configuration framework, could suggest which solution to choose?
>
> You could change this. Do something like
>
> cdl_option CYGHWR_HAL_ARM_AT91_ARM7 {
> display "ARM7 core"
> no_define
> calculated { is_substring("R40807 R40008 M42800A M55800A JTST AT91SAM7S", CYGHWR_HAL_ARM_AT91) }
> implements CYGINT_HAL_ARM_ARCH_ARM7
> }
>
> cdl_option CYGHWR_HAL_ARM_AT91_ARM9 {
> display "ARM9 core"
> no_define
> calculated { is_substring("AT91SAM9", CYGHWR_HAL_ARM_AT91) }
> implements CYGINT_HAL_ARM_ARCH_ARM9
> }
No need for that. If it's SAM9 then CYGPKG_HAL_ARM_ARM9 will have been
brought into the configuration courtesy of the ecos.db target template.
Jifl
--
eCosCentric Limited http://www.eCosCentric.com/ The eCos experts
Barnwell House, Barnwell Drive, Cambridge, UK. Tel: +44 1223 245571
Registered in England and Wales: Reg No 4422071.
------["Si fractum non sit, noli id reficere"]------ Opinions==mine
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: at91sam9263ek
2008-11-18 16:38 ` at91sam9263ek Jonathan Larmour
@ 2008-11-25 20:51 ` Evgeniy Dushistov
2008-11-25 22:58 ` at91sam9263ek Jonathan Larmour
0 siblings, 1 reply; 12+ messages in thread
From: Evgeniy Dushistov @ 2008-11-25 20:51 UTC (permalink / raw)
To: Jonathan Larmour; +Cc: Andrew Lunn, ecos-devel
On Tue, Nov 18, 2008 at 04:37:33PM +0000, Jonathan Larmour wrote:
> Andrew Lunn wrote:
> > On Thu, Nov 06, 2008 at 09:23:28PM +0300, Evgeniy Dushistov wrote:
> >> Hi,
> >>
> >> I want to see working ecos on at91sam9263ek board.
> >> As far as I know, there is no freely available source code of ecos port on
> >> this hardware, am I right? (I know about ecoscentric, but it is not
> >> freely available).
> >>
> >> May be anybody is working on such kind of port?
> >>
> >> Right now I'm reading docs about cdl language, and stuck on which
> >> variant to choose: create directory at91sam9 in
> >> packages/hal/arm/arm9 and write hal package from scratch
> >> or use packages/hal/arm/at91 stuff, at91sam9263ek is very similar
> >> to at91sam7s,
>
> I don't think it's that similar. At least, it seems similar at a
> high-level, but differs in most of the details once you get into it. The
> register layouts differ in many places between the SAM9 variants even. I
> think you'd end up with huge amounts of ifdefs.
>
Can you, please, give, example of such defence?
I compared at91sam7s and at91sam9263ek datasheets, the base addresses
on which IP blocks are mapped sometimes different,
but layouts of the registers the same, here what I compare:
- gpio controller
- DBGU controller
- TC
- PMC
- AIC
- WatchDog
- Reset controller
- PIT
Only In PMC there is additional register for plla, instead of
reserved place in sam7's pmc. All other register have the same offset
and names on both boards.
Was I missed something?
> I recommend the former approach. If there is anything that can sensibly be
> shared, perhaps it could be broken out into a separate package.
>
you mean split hal on several packages?
like package for work with gpio,
for reset cpu and so on?
--
/Evgeniy
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: at91sam9263ek
2008-11-25 20:51 ` at91sam9263ek Evgeniy Dushistov
@ 2008-11-25 22:58 ` Jonathan Larmour
0 siblings, 0 replies; 12+ messages in thread
From: Jonathan Larmour @ 2008-11-25 22:58 UTC (permalink / raw)
To: Evgeniy Dushistov; +Cc: Andrew Lunn, ecos-devel
Evgeniy Dushistov wrote:
> On Tue, Nov 18, 2008 at 04:37:33PM +0000, Jonathan Larmour wrote:
>
>>Andrew Lunn wrote:
>>
>>>On Thu, Nov 06, 2008 at 09:23:28PM +0300, Evgeniy Dushistov wrote:
>>>
>>>>Hi,
>>>>
>>>>I want to see working ecos on at91sam9263ek board.
>>>>As far as I know, there is no freely available source code of ecos port on
>>>>this hardware, am I right? (I know about ecoscentric, but it is not
>>>>freely available).
>>>>
>>>>May be anybody is working on such kind of port?
>>>>
>>>>Right now I'm reading docs about cdl language, and stuck on which
>>>>variant to choose: create directory at91sam9 in
>>>>packages/hal/arm/arm9 and write hal package from scratch
>>>>or use packages/hal/arm/at91 stuff, at91sam9263ek is very similar
>>>>to at91sam7s,
>>
>>I don't think it's that similar. At least, it seems similar at a
>>high-level, but differs in most of the details once you get into it. The
>>register layouts differ in many places between the SAM9 variants even. I
>>think you'd end up with huge amounts of ifdefs.
>
> Can you, please, give, example of such defence?
Well I had flicked through our own SAM926x implementation to see the
variations, and there was differences for most of the base addresses as
you saw, the bus matrix, the EBI, pin mappings, peripheral assignments,
USB and PLLs.
Just to be clear, I was talking about cloning, rather than really starting
from scratch, but I'm sure that's what you were considering.
>>I recommend the former approach. If there is anything that can sensibly be
>>shared, perhaps it could be broken out into a separate package.
>>
>
> you mean split hal on several packages?
> like package for work with gpio,
> for reset cpu and so on?
I meant have a common package for the bits which are indeed common.
The reason is that I think it would be bad for the AT91 HAL to be a big
mess of #ifdefs for all the different variants all the way through. It's
getting that way already. eCos is meant to be modular, rather than having
large monolithic headers with the kitchen sink thrown in. It becomes
difficult to work out exactly what does apply where.
I guess alternatively, if it were in a single package, then it would be
better to break it into different files, and only the correct files are
used according to the configuration. A bit like the SH3 or SH4 HALs (I
suggest looking at those to see what I mean). Those had to deal with the
same sorts of problems - peripherals in various implementations combined
in different ways.
IMHO.
For example, consider the cache and MMU stuff. That really shouldn't
belong in the AT91 HAL. At least not the existing form of AT91 HAL. At the
very least you can't have hal_cache.h and var_io.h in both the ARM9 HAL
and the AT91 HAL, so _something_ will have to be majorly reorganised.
Jifl
--
eCosCentric Limited http://www.eCosCentric.com/ The eCos experts
Barnwell House, Barnwell Drive, Cambridge, UK. Tel: +44 1223 245571
Registered in England and Wales: Reg No 4422071.
------["The best things in life aren't things."]------ Opinions==mine
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] [RFC] at91sam9263ek support
2008-11-11 18:55 ` [PATCH] [RFC] at91sam9263ek support Evgeniy Dushistov
@ 2008-11-26 15:06 ` roberto.lavarini
2008-11-27 19:07 ` Evgeniy Dushistov
0 siblings, 1 reply; 12+ messages in thread
From: roberto.lavarini @ 2008-11-26 15:06 UTC (permalink / raw)
To: ecos-devel
Hi,
I've try to follow your patch but I have some problems during compiling
phase. Can you tell me the directory that you used to create the others two
directory at91sam9 and at91sam9263ek? I used at91sam7s folder for both.
Thank you.
--
View this message in context: http://www.nabble.com/at91sam9263ek-tp20367309p20702652.html
Sent from the Sourceware - ecos-devel mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] [RFC] at91sam9263ek support
2008-11-26 15:06 ` roberto.lavarini
@ 2008-11-27 19:07 ` Evgeniy Dushistov
2008-11-28 11:04 ` roberto.lavarini
0 siblings, 1 reply; 12+ messages in thread
From: Evgeniy Dushistov @ 2008-11-27 19:07 UTC (permalink / raw)
To: roberto.lavarini; +Cc: ecos-devel
On Wed, Nov 26, 2008 at 07:05:54AM -0800, roberto.lavarini wrote:
>
> Hi,
>
> I've try to follow your patch but I have some problems during compiling
> phase. Can you tell me the directory that you used to create the others two
> directory at91sam9 and at91sam9263ek? I used at91sam7s folder for both.
>
I don't undesntand you, you need only apply patch, and that's all,
no need copy something somewhere, just apply patch, run configtool
choose template, hardware at91sam9263ek, package redboot,
and build.
--
/Evgeniy
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] [RFC] at91sam9263ek support
2008-11-27 19:07 ` Evgeniy Dushistov
@ 2008-11-28 11:04 ` roberto.lavarini
[not found] ` <E1L61JP-000FPO-00.dushistov-mail-ru@f224.mail.ru>
0 siblings, 1 reply; 12+ messages in thread
From: roberto.lavarini @ 2008-11-28 11:04 UTC (permalink / raw)
To: ecos-devel
Thanks for your answer.
In your patch seems to miss the files mlt_arm_at91sam9263ek_rom.h and
mlt_arm_at91sam9263ek_rom.ldi. So I obtain an error if I try to start
"RedBoot" from ROM. Can you complete your patch? I consider it very useful.
Thanks for your support.
Roberto
Evgeniy Dushistov wrote:
>
> On Wed, Nov 26, 2008 at 07:05:54AM -0800, roberto.lavarini wrote:
>>
>> Hi,
>>
>> I've try to follow your patch but I have some problems during compiling
>> phase. Can you tell me the directory that you used to create the others
>> two
>> directory at91sam9 and at91sam9263ek? I used at91sam7s folder for both.
>>
>
> I don't undesntand you, you need only apply patch, and that's all,
> no need copy something somewhere, just apply patch, run configtool
> choose template, hardware at91sam9263ek, package redboot,
> and build.
>
> --
> /Evgeniy
>
>
>
--
View this message in context: http://www.nabble.com/at91sam9263ek-tp20367309p20732544.html
Sent from the Sourceware - ecos-devel mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Re[2]: [PATCH] [RFC] at91sam9263ek support
[not found] ` <e7aaf8e40811280706u6cd9579es556e7bb44ee93021@mail.gmail.com>
@ 2008-11-29 18:22 ` Evgeniy Dushistov
2008-12-02 9:39 ` roberto.lavarini
0 siblings, 1 reply; 12+ messages in thread
From: Evgeniy Dushistov @ 2008-11-29 18:22 UTC (permalink / raw)
To: Roberto Lavarini; +Cc: ecos-devel
On Fri, Nov 28, 2008 at 04:06:38PM +0100, Roberto Lavarini wrote:
> Well, the compilation of redboot with your Patch ends successfully if I set
> RAM as default value of CYG_HAL_STARTUP in "hal_arm_at91_sam9.cdl" file. If
> the default value remains ROM the following error will appears in
> compilation time:
>
> /home/roberto/ecos-cvs/ecos/packages/hal/arm/arch/current/src/redboot_linux_exec.c:75:32:
> error: pkgconf/mlt_arm_at91sam9263ek_rom.h: No such file or directory
>
> So I load at91bootstrap to the board and then I try to load redboot
> (compiled with RAM default value) in dataflash via sam-ba, but I have some
> difficult to understand the address to set in sam-ba where the redboot image
> will be loaded. I try to use 0x00100000 or 0x4000 (the address that I used
> with U-boot) but they don't work correctly, and on debug port I only see
> "RomBoot>" shell. Do you have some suggestion to give to me?
>
Address in dataflash depends on how you build at91bootstrap,
there is configuration file, I don't remember exactly, like
board/at91sam9263ek/dataflash/at91sam9263ek.h
where you point address and size in dataflash,
and address in sdram where put what it load in dataflash.
sdram address should be 0x23f00000
Also check that your config's setting is right:
- communication channel be DBGU and should be only one
- main oscillator frequency should be 16 and something Mhz don't
remember details, look at board's documentation, divider and
multiplier should be the same as at91boostrap set
- redboot should not expect that vectors (pointers to services, like
print to console and so on) are initialized, option name is like "work with
redboot"
--
/Evgeniy
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Re[2]: [PATCH] [RFC] at91sam9263ek support
2008-11-29 18:22 ` Re[2]: " Evgeniy Dushistov
@ 2008-12-02 9:39 ` roberto.lavarini
2008-12-02 11:21 ` Re[4]: " Evgeniy Dushistov
0 siblings, 1 reply; 12+ messages in thread
From: roberto.lavarini @ 2008-12-02 9:39 UTC (permalink / raw)
To: ecos-devel
Dear Evgeniy,
I looked the file "at91sam9263ek.h", and the dataflash address to set in
SAM-BA seem to be 0x8000. In fact, if I use the same at91bootloader with
uboot with this address, uboot starts correctly. If I use patched redboot
for at91sam9263ek, redboot doesn't start and I only see "RomBoot>" shell. I
used exactly your patch, apply on ecos-cvs, and the only thing I do, is to
set RAM as default value of CYG_HAL_STARTUP in
packages/hal/arm/at91/at91sam9/current/cdl/hal_arm_at91sam9.cdl. I
downloaded redboot on my board with SAM-BA using DataFlash section with
0x8000 destination address. I don't understand why redboot doesn't start on
my board.
Roberto
Evgeniy Dushistov wrote:
>
> On Fri, Nov 28, 2008 at 04:06:38PM +0100, Roberto Lavarini wrote:
>> Well, the compilation of redboot with your Patch ends successfully if I
>> set
>> RAM as default value of CYG_HAL_STARTUP in "hal_arm_at91_sam9.cdl" file.
>> If
>> the default value remains ROM the following error will appears in
>> compilation time:
>>
>> /home/roberto/ecos-cvs/ecos/packages/hal/arm/arch/current/src/redboot_linux_exec.c:75:32:
>> error: pkgconf/mlt_arm_at91sam9263ek_rom.h: No such file or directory
>>
>> So I load at91bootstrap to the board and then I try to load redboot
>> (compiled with RAM default value) in dataflash via sam-ba, but I have
>> some
>> difficult to understand the address to set in sam-ba where the redboot
>> image
>> will be loaded. I try to use 0x00100000 or 0x4000 (the address that I
>> used
>> with U-boot) but they don't work correctly, and on debug port I only see
>> "RomBoot>" shell. Do you have some suggestion to give to me?
>>
>
> Address in dataflash depends on how you build at91bootstrap,
> there is configuration file, I don't remember exactly, like
> board/at91sam9263ek/dataflash/at91sam9263ek.h
> where you point address and size in dataflash,
> and address in sdram where put what it load in dataflash.
> sdram address should be 0x23f00000
>
> Also check that your config's setting is right:
> - communication channel be DBGU and should be only one
> - main oscillator frequency should be 16 and something Mhz don't
> remember details, look at board's documentation, divider and
> multiplier should be the same as at91boostrap set
> - redboot should not expect that vectors (pointers to services, like
> print to console and so on) are initialized, option name is like "work
> with
> redboot"
>
> --
> /Evgeniy
>
>
>
--
View this message in context: http://www.nabble.com/at91sam9263ek-tp20367309p20788865.html
Sent from the Sourceware - ecos-devel mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re[4]: [PATCH] [RFC] at91sam9263ek support
2008-12-02 9:39 ` roberto.lavarini
@ 2008-12-02 11:21 ` Evgeniy Dushistov
0 siblings, 0 replies; 12+ messages in thread
From: Evgeniy Dushistov @ 2008-12-02 11:21 UTC (permalink / raw)
To: roberto.lavarini; +Cc: ecos-devel
-----Original Message-----
>
>
>Dear Evgeniy,
> I looked the file "at91sam9263ek.h", and the dataflash address to set in
>SAM-BA seem to be 0x8000. In fact, if I use the same at91bootloader with
>uboot with this address, uboot starts correctly. If I use patched redboot
>for at91sam9263ek, redboot doesn't start and I only see "RomBoot>" shell. I
>used exactly your patch, apply on ecos-cvs, and the only thing I do, is to
>set RAM as default value of CYG_HAL_STARTUP in
>packages/hal/arm/at91/at91sam9/current/cdl/hal_arm_at91sam9.cdl. I
>downloaded redboot on my board with SAM-BA using DataFlash section with
>0x8000 destination address. I don't understand why redboot doesn't start on
>my board.
>
I see three possible reasons:
1)at91bootstrap doesn't start it (almost impossible, as you say)
2)redboot fails on early stage (only jtag can help)
3)wrong configuration, like main osilator frequnce, multiplier, divider and so on
you can debug it via jtag, or wait the next version of patch,
where I will fix several bugs.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2008-12-02 11:21 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-11-06 18:46 at91sam9263ek Evgeniy Dushistov
2008-11-10 9:21 ` at91sam9263ek Andrew Lunn
2008-11-11 18:55 ` [PATCH] [RFC] at91sam9263ek support Evgeniy Dushistov
2008-11-26 15:06 ` roberto.lavarini
2008-11-27 19:07 ` Evgeniy Dushistov
2008-11-28 11:04 ` roberto.lavarini
[not found] ` <E1L61JP-000FPO-00.dushistov-mail-ru@f224.mail.ru>
[not found] ` <e7aaf8e40811280706u6cd9579es556e7bb44ee93021@mail.gmail.com>
2008-11-29 18:22 ` Re[2]: " Evgeniy Dushistov
2008-12-02 9:39 ` roberto.lavarini
2008-12-02 11:21 ` Re[4]: " Evgeniy Dushistov
2008-11-18 16:38 ` at91sam9263ek Jonathan Larmour
2008-11-25 20:51 ` at91sam9263ek Evgeniy Dushistov
2008-11-25 22:58 ` at91sam9263ek Jonathan Larmour
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).