public inbox for ecos-discuss@sourceware.org
 help / color / mirror / Atom feed
* [ECOS] peculiar RedBoot network problem
@ 2001-07-20  8:30 Trenton D. Adams
  2001-07-20  9:22 ` Jonathan Larmour
  0 siblings, 1 reply; 5+ messages in thread
From: Trenton D. Adams @ 2001-07-20  8:30 UTC (permalink / raw)
  To: 'eCos Discussion'

I run my programs over the network using RedBoot.  RedBoot is set to use
the ip 172.16.1.240.  My eCos application is set to get an IP using
DHCP.  It gets an ip of 172.16.1.11.  Now, I ran my eCos program from
RedBoot, and now a reset of the board does not reset the IP to
172.16.1.240.  It's almost as if the eCos application has taken over
some how.  Of course RedBoot doesn't listen on 172.16.1.11 so I can't do
a GDB connection to there.  Also, running fconfig through a serial port
shows that 172.16.1.240 is in fact the IP RedBoot is setup for.

Any ideas why this might happen?  I've been running eCos programs with
network support enabled for the past day using the network GDB of
RedBoot and this hasn't occurred until now.
 
Trenton D. Adams
Embedded Developer
Windows Developer
Extreme Engineering Ltd.
Calgary Alberta.



^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2001-07-20  9:52 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-07-20  8:30 [ECOS] peculiar RedBoot network problem Trenton D. Adams
2001-07-20  9:22 ` Jonathan Larmour
2001-07-20  9:28   ` Trenton D. Adams
2001-07-20  9:41     ` Jonathan Larmour
2001-07-20  9:52       ` Trenton D. Adams

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).