[ECOS] Eth0/Eth1 Access Problem

[ECOS] Eth0/Eth1 Access Problem

[Alperen Coþkun]

Hi all,

I have a board using 2 ethernet ports, Eth0 and Eth1. I want to use one of 
them for web user interface and other one for another purpose.
But, I couldn't make this difference. Unfortunately, both of the ports are 
accessed by user interface.
How can I avoid Eth1 being accessed by web user interface? What decides 
which port to be accessed by user interface?

Alperen

_________________________________________________________________
Sohbet ve eglence, web kamera ve sesli sohbet Messenger'de. 
http://messenger.msn.com/?mkt=tr&DI=3490&XAPID=2584


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] RE: Eth0/Eth1 Access Problem

[Rick Davis]

You will have to modify httpd.c in packages/net/httpd

Right now it binds to ANY interface.

    server_address.sin_family = AF_INET;
    server_address.sin_len = sizeof(server_address);
*    server_address.sin_addr.s_addr = INADDR_ANY;
    server_address.sin_port = htons(http_port);


To bind to a specific interface you need to do this

    server_address.sin_family = AF_INET;
    server_address.sin_len = sizeof(server_address);
    server_address.sin_addr.s_addr = htonl (0x0a0a0a0a);
or
    server_address.sin_addr.s_addr = htonl (inet_addr ("10.10.10.10"));
    server_address.sin_port = htons(http_port);


Hope this helps,
Rick Davis


-----Original Message-----
From: Alperen Coþkun [mailto:a_a_coskunoc@hotmail.com] 
Sent: Tuesday, September 25, 2007 3:23 AM
To: ecos-discuss@ecos.sourceware.org
Subject: Eth0/Eth1 Access Problem

Hi all,

I have a board using 2 ethernet ports, Eth0 and Eth1. I want to use one of 
them for web user interface and other one for another purpose.
But, I couldn't make this difference. Unfortunately, both of the ports are 
accessed by user interface.
How can I avoid Eth1 being accessed by web user interface? What decides 
which port to be accessed by user interface?

Alperen

_________________________________________________________________
Sohbet ve eglence, web kamera ve sesli sohbet Messenger'de. 
http://messenger.msn.com/?mkt=tr&DI=3490&XAPID=2584



--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

RE: [ECOS] RE: Eth0/Eth1 Access Problem

[Vivek-Kumar Gupta]

Interface eth0 or eth1 will have a separate IP address.
Server will be bind to IP Address and Port no. 
This way they are separate.
So give some IP Address for binding it to Server.

Regards,
Vivek:-
 -----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Rick Davis
Sent: Wednesday, September 26, 2007 3:01 PM
To: 'Alperen Coþkun'; ecos-discuss@ecos.sourceware.org
Subject: [ECOS] RE: Eth0/Eth1 Access Problem

You will have to modify httpd.c in packages/net/httpd

Right now it binds to ANY interface.

    server_address.sin_family = AF_INET;
    server_address.sin_len = sizeof(server_address);
*    server_address.sin_addr.s_addr = INADDR_ANY;
    server_address.sin_port = htons(http_port);


To bind to a specific interface you need to do this

    server_address.sin_family = AF_INET;
    server_address.sin_len = sizeof(server_address);
    server_address.sin_addr.s_addr = htonl (0x0a0a0a0a);
or
    server_address.sin_addr.s_addr = htonl (inet_addr ("10.10.10.10"));
    server_address.sin_port = htons(http_port);


Hope this helps,
Rick Davis


-----Original Message-----
From: Alperen Coþkun [mailto:a_a_coskunoc@hotmail.com] 
Sent: Tuesday, September 25, 2007 3:23 AM
To: ecos-discuss@ecos.sourceware.org
Subject: Eth0/Eth1 Access Problem

Hi all,

I have a board using 2 ethernet ports, Eth0 and Eth1. I want to use one of 
them for web user interface and other one for another purpose.
But, I couldn't make this difference. Unfortunately, both of the ports are 
accessed by user interface.
How can I avoid Eth1 being accessed by web user interface? What decides 
which port to be accessed by user interface?

Alperen

_________________________________________________________________
Sohbet ve eglence, web kamera ve sesli sohbet Messenger'de. 
http://messenger.msn.com/?mkt=tr&DI=3490&XAPID=2584



-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

RE: [ECOS] RE: Eth0/Eth1 Access Problem

[Rick Davis]

The IP address you assign to

server_address.sin_addr.s_addr

is the IP address of the interface eth0 or eth1. You will have to set this
yourself. It you are changing the IP address on the fly, you will have to
create a variable, say httpd_bind_address, and set this to the address of
either eth0 or eth1. Then restart or manually start httpd. Make sure the
address you use is in network (big endian) order.

Rick



-----Original Message-----
From: Vivek-Kumar Gupta [mailto:vgupta@marvell.com] 
Sent: Wednesday, September 26, 2007 5:44 AM
To: Rick Davis; Alperen Coþkun; ecos-discuss@ecos.sourceware.org
Subject: RE: [ECOS] RE: Eth0/Eth1 Access Problem

Interface eth0 or eth1 will have a separate IP address.
Server will be bind to IP Address and Port no. 
This way they are separate.
So give some IP Address for binding it to Server.

Regards,
Vivek:-
 -----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Rick Davis
Sent: Wednesday, September 26, 2007 3:01 PM
To: 'Alperen Coþkun'; ecos-discuss@ecos.sourceware.org
Subject: [ECOS] RE: Eth0/Eth1 Access Problem

You will have to modify httpd.c in packages/net/httpd

Right now it binds to ANY interface.

    server_address.sin_family = AF_INET;
    server_address.sin_len = sizeof(server_address);
*    server_address.sin_addr.s_addr = INADDR_ANY;
    server_address.sin_port = htons(http_port);


To bind to a specific interface you need to do this

    server_address.sin_family = AF_INET;
    server_address.sin_len = sizeof(server_address);
    server_address.sin_addr.s_addr = htonl (0x0a0a0a0a);
or
    server_address.sin_addr.s_addr = htonl (inet_addr ("10.10.10.10"));
    server_address.sin_port = htons(http_port);


Hope this helps,
Rick Davis


-----Original Message-----
From: Alperen Coþkun [mailto:a_a_coskunoc@hotmail.com] 
Sent: Tuesday, September 25, 2007 3:23 AM
To: ecos-discuss@ecos.sourceware.org
Subject: Eth0/Eth1 Access Problem

Hi all,

I have a board using 2 ethernet ports, Eth0 and Eth1. I want to use one of 
them for web user interface and other one for another purpose.
But, I couldn't make this difference. Unfortunately, both of the ports are 
accessed by user interface.
How can I avoid Eth1 being accessed by web user interface? What decides 
which port to be accessed by user interface?

Alperen

_________________________________________________________________
Sohbet ve eglence, web kamera ve sesli sohbet Messenger'de. 
http://messenger.msn.com/?mkt=tr&DI=3490&XAPID=2584



-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

RE: [ECOS] RE: Eth0/Eth1 Access Problem

[Alperen Coskun]

Hi,

I tried what you described below as;
     server_address.sin_family = AF_INET;
     server_address.sin_len = sizeof(server_address);
     server_address.sin_addr.s_addr = htonl (inet_addr ("X.X.X.X"));
     server_address.sin_port = htons(http_port);

where X is a valid IP address in the network. But, nothing changed. Let me 
explain what I want to do. May be you can help again:

I'm giving a default IP to both ETH interfaces in ecos configuration tool. 
Then, ecos sets these IP addresses for web interface.(I think it does it 
with;
                    server_address.sin_addr.s_addr = INADDR_ANY)
I want to change these default values to other specific values manually. (As 
Mr. Rick explained, I want to change IP address within the program)

Thank you very much for your response, explanations are very helpful.
Alperen


>From: "Rick Davis" <rickdavisjr@comcast.net>
>To: "'Vivek-Kumar Gupta'" <vgupta@marvell.com>,'Alperen Coþkun' 
><a_a_coskunoc@hotmail.com>,<ecos-discuss@ecos.sourceware.org>
>Subject: RE: [ECOS] RE: Eth0/Eth1 Access Problem
>Date: Wed, 26 Sep 2007 13:37:07 -0400
>
>The IP address you assign to
>
>server_address.sin_addr.s_addr
>
>is the IP address of the interface eth0 or eth1. You will have to set this
>yourself. It you are changing the IP address on the fly, you will have to
>create a variable, say httpd_bind_address, and set this to the address of
>either eth0 or eth1. Then restart or manually start httpd. Make sure the
>address you use is in network (big endian) order.
>
>Rick
>
>
>
>-----Original Message-----
>From: Vivek-Kumar Gupta [mailto:vgupta@marvell.com]
>Sent: Wednesday, September 26, 2007 5:44 AM
>To: Rick Davis; Alperen Coþkun; ecos-discuss@ecos.sourceware.org
>Subject: RE: [ECOS] RE: Eth0/Eth1 Access Problem
>
>Interface eth0 or eth1 will have a separate IP address.
>Server will be bind to IP Address and Port no.
>This way they are separate.
>So give some IP Address for binding it to Server.
>
>Regards,
>Vivek:-
>  -----Original Message-----
>From: ecos-discuss-owner@ecos.sourceware.org
>[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Rick Davis
>Sent: Wednesday, September 26, 2007 3:01 PM
>To: 'Alperen Coþkun'; ecos-discuss@ecos.sourceware.org
>Subject: [ECOS] RE: Eth0/Eth1 Access Problem
>
>You will have to modify httpd.c in packages/net/httpd
>
>Right now it binds to ANY interface.
>
>     server_address.sin_family = AF_INET;
>     server_address.sin_len = sizeof(server_address);
>*    server_address.sin_addr.s_addr = INADDR_ANY;
>     server_address.sin_port = htons(http_port);
>
>
>To bind to a specific interface you need to do this
>
>     server_address.sin_family = AF_INET;
>     server_address.sin_len = sizeof(server_address);
>     server_address.sin_addr.s_addr = htonl (0x0a0a0a0a);
>or
>     server_address.sin_addr.s_addr = htonl (inet_addr ("10.10.10.10"));
>     server_address.sin_port = htons(http_port);
>
>
>Hope this helps,
>Rick Davis
>
>
>-----Original Message-----
>From: Alperen Coþkun [mailto:a_a_coskunoc@hotmail.com]
>Sent: Tuesday, September 25, 2007 3:23 AM
>To: ecos-discuss@ecos.sourceware.org
>Subject: Eth0/Eth1 Access Problem
>
>Hi all,
>
>I have a board using 2 ethernet ports, Eth0 and Eth1. I want to use one of
>them for web user interface and other one for another purpose.
>But, I couldn't make this difference. Unfortunately, both of the ports are
>accessed by user interface.
>How can I avoid Eth1 being accessed by web user interface? What decides
>which port to be accessed by user interface?
>
>Alperen
>
>_________________________________________________________________
>Sohbet ve eglence, web kamera ve sesli sohbet Messenger'de.
>http://messenger.msn.com/?mkt=tr&DI=3490&XAPID=2584
>
>
>
>--
>Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
>and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>

_________________________________________________________________
En etkili ve güvenilir PC Korumayi tercih edin, rahat edin! 
http://www.msn.com.tr/security/


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] SSL (HTTPS) support for ecos

[Alperen Coskun]

Hi all,

Does Ecos support SSLv3 (https)? Did anyone tried anything about this?
I have a web user interface and want to use SSl support to provide  a secure 
login when user enters his/her password.

_________________________________________________________________
En etkili ve güvenilir PC Korumayi tercih edin, rahat edin! 
http://www.msn.com.tr/security/


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Re: [ECOS] SSL (HTTPS) support for ecos

[Tales Toledo]

Hi Alperen

take a look at openssl-1.9.6b.epk package as start point.

TT.

On 10/8/07, Alperen Coskun <a_a_coskunoc@hotmail.com> wrote:
> Hi all,
>
> Does Ecos support SSLv3 (https)? Did anyone tried anything about this?
> I have a web user interface and want to use SSl support to provide  a secure
> login when user enters his/her password.
>
> _________________________________________________________________
> En etkili ve güvenilir PC Korumayi tercih edin, rahat edin!
> http://www.msn.com.tr/security/
>
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Re: [ECOS] SSL (HTTPS) support for ecos

[Alperen Coskun]

Thanks for your quick reply.

I add that package to my .ecc file. But, the only place I want to use 
openssl is in secure login operation. I want nobody to see the login 
information (username and password) from the network line.

Is there any brief example about openssl which can help me to implement 
this? (Because there are a lot of source codes in openssl package...)

Regards


>From: "Tales Toledo" <toledo.tales@gmail.com>
>To: "Alperen Coskun" <a_a_coskunoc@hotmail.com>
>CC: ecos-discuss@ecos.sourceware.org
>Subject: Re: [ECOS] SSL (HTTPS) support for ecos
>Date: Mon, 8 Oct 2007 15:07:03 -0300
>
>Hi Alperen
>
>take a look at openssl-1.9.6b.epk package as start point.
>
>TT.
>
>On 10/8/07, Alperen Coskun <a_a_coskunoc@hotmail.com> wrote:
> > Hi all,
> >
> > Does Ecos support SSLv3 (https)? Did anyone tried anything about this?
> > I have a web user interface and want to use SSl support to provide  a 
>secure
> > login when user enters his/her password.
> >
> > _________________________________________________________________
> > En etkili ve güvenilir PC Korumayi tercih edin, rahat edin!
> > http://www.msn.com.tr/security/
> >
> >
> > --
> > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
> >
> >

_________________________________________________________________
Hem e-postalarinizi, hem de Bilgisayarinizi MSN Güvenlik ile koruma altina 
alin! http://www.msn.com.tr/security/


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] Flash Write Problem

[Alperen Coskun]

Hi all,

Is there anyone who is able to write to a strata flash? I examined the 
source code for flash and the datasheet. It says to write 0xE8 for writing 
and wait and so on but, even the expected value which is 0x80 doesn't come. 
What can be the problem?

Alperen

_________________________________________________________________
En etkili ve güvenilir PC Korumayi tercih edin, rahat edin! 
http://www.msn.com.tr/security/


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss