* [ECOS] No host branch in my checkedout ecos tree
@ 2014-01-15 16:38 Bob Brusa
2014-01-15 19:35 ` Sergei Gavrikov
0 siblings, 1 reply; 6+ messages in thread
From: Bob Brusa @ 2014-01-15 16:38 UTC (permalink / raw)
To: ecos discuss
Hi
I work on a W7pro PC with cygwin installed. When checking out ecos with
the command:
cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P ecos
I would expect the host branch to be included. But it's not. How can I
get access to the branch ecos/host/tools/configtool?
Thanks for help and best regards,
Bob
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] No host branch in my checkedout ecos tree
2014-01-15 16:38 [ECOS] No host branch in my checkedout ecos tree Bob Brusa
@ 2014-01-15 19:35 ` Sergei Gavrikov
2014-01-16 15:48 ` Bob Brusa
0 siblings, 1 reply; 6+ messages in thread
From: Sergei Gavrikov @ 2014-01-15 19:35 UTC (permalink / raw)
To: Bob Brusa; +Cc: ecos discuss
On Wed, 15 Jan 2014, Bob Brusa wrote:
> I work on a W7pro PC with cygwin installed. When checking out ecos
> with the command:
>
> cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P ecos
This is to get a checkout of 'ecos' module.
> I would expect the host branch to be included. But it's not. How can I
> get access to the branch ecos/host/tools/configtool?
and to get 'host' module, type
cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P host
Sergei
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] No host branch in my checkedout ecos tree
2014-01-15 19:35 ` Sergei Gavrikov
@ 2014-01-16 15:48 ` Bob Brusa
2014-01-16 16:20 ` Sergei Gavrikov
0 siblings, 1 reply; 6+ messages in thread
From: Bob Brusa @ 2014-01-16 15:48 UTC (permalink / raw)
To: Sergei Gavrikov; +Cc: ecos discuss
Am 15.01.2014 19:35, schrieb Sergei Gavrikov:
> and to get 'host' module, type
>
> cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P host
Hi Sergei,
the above worked - although I do not understand why it is at it is. The
above cmd - but with ecos instead of host - checks out ecos/packages,
ecos/doc and more, but not ecos/host which is on the same level as the
ones mentioned.
Anyway, following checkout of host, I proceeded by creating a directory,
starting in cygwin/opt
mkdir host
cd host
then
rwb@w500 /opt/host
$ c:/cygwin/opt/ecos/host/configure --with-tcl=c:/cygwin/lib/tcl8.5
--with-tk=c:/cygwin/lib/tk8.5
checking build system type... i686-pc-cygwin
checking host system type... i686-pc-cygwin
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking that a separate build tree is being used... yes
configure: creating ./config.status
c:/cygwin/opt/ecos/host/configure: line 2990: test: too many arguments
c:/cygwin/opt/ecos/host/configure: line 2990: test: too many arguments
c:/cygwin/opt/ecos/host/configure: line 2990: test: too many arguments
c:/cygwin/opt/ecos/host/configure: line 2990: test: too many arguments
c:/cygwin/opt/ecos/host/configure: line 2990: test: too many arguments
c:/cygwin/opt/ecos/host/configure: line 2990: test: too many arguments
configure: error: could not make ./config.status
rwb@w500 /opt/host
Can you help to get rid of this error message? Thanks and
best regards,
Robert
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] No host branch in my checkedout ecos tree
2014-01-16 15:48 ` Bob Brusa
@ 2014-01-16 16:20 ` Sergei Gavrikov
2014-01-16 17:03 ` Bob Brusa
[not found] ` <52D80F2F.90903@gmail.com>
0 siblings, 2 replies; 6+ messages in thread
From: Sergei Gavrikov @ 2014-01-16 16:20 UTC (permalink / raw)
To: Bob Brusa; +Cc: ecos discuss
On Thu, 16 Jan 2014, Bob Brusa wrote:
> Am 15.01.2014 19:35, schrieb Sergei Gavrikov:
> > and to get 'host' module, type
> >
> > cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P host
>
> Hi Sergei,
> the above worked - although I do not understand why it is at it is.
> The above cmd - but with ecos instead of host - checks out
> ecos/packages, ecos/doc and more, but not ecos/host which is on the
> same level as the ones mentioned.
'host' is not directory, but, name of the module
> Anyway, following checkout of host, I proceeded by creating a directory,
> starting in cygwin/opt
>
> mkdir host
> cd host
And below does not work in Cygwin?
cd /opt
cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P ecos
cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P host
or
cd $HOME
..
..
Check that you have set ECOS_REPOSITORY variable.
echo $ECOS_REPOSITORY ;# What have you seen?
> $ c:/cygwin/opt/ecos/host/configure --with-tcl=c:/cygwin/lib/tcl8.5
> --with-tk=c:/cygwin/lib/tk8.5
[snip]
> c:/cygwin/opt/ecos/host/configure: line 2990: test: too many arguments
Install Tcl/Tk *8.4* dev. packages.
Hope that you read README.host at least from here
It is necessary to use a separate build tree rather than build
directly in the source tree. This is enforced by the configure scripts.
$ mkdir build
$ cd build
Then try inside build directory (with no arguments)
/opt/ecos/host/configure
Sorry, I have no chance to try the above in Cygwin. I think it has to
work, but I could miss some things like Cygwin's mangling of the paths.
Sergei
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [ECOS] No host branch in my checkedout ecos tree
2014-01-16 16:20 ` Sergei Gavrikov
@ 2014-01-16 17:03 ` Bob Brusa
[not found] ` <52D80F2F.90903@gmail.com>
1 sibling, 0 replies; 6+ messages in thread
From: Bob Brusa @ 2014-01-16 17:03 UTC (permalink / raw)
To: Sergei Gavrikov; +Cc: ecos discuss
Am 16.01.2014 16:19, schrieb Sergei Gavrikov:
> On Thu, 16 Jan 2014, Bob Brusa wrote:
>
>
> And below does not work in Cygwin?
>
> cd /opt
> cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P ecos
> cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P host
>
Sure, both worked. I also understand now, that ecos and host are
modulenames. May be I was misled by the layout as shown on the web
interface of ecos-cvs. There it looks as if host is simply part of the
ecos tree. See
http://ecos.sourceware.org/cgi-bin/cvsweb.cgi/ecos/?cvsroot=ecos
> Check that you have set ECOS_REPOSITORY variable.
>
> echo $ECOS_REPOSITORY ;# What have you seen?
>
This seems ok. I get:
rwb@w500 /opt
$ echo $ECOS_REPOSITORY
/cygdrive/c/cygwin/opt/ecos
>> $ c:/cygwin/opt/ecos/host/configure --with-tcl=c:/cygwin/lib/tcl8.5
>> --with-tk=c:/cygwin/lib/tk8.5
> [snip]
>> c:/cygwin/opt/ecos/host/configure: line 2990: test: too many arguments
>
> Install Tcl/Tk *8.4* dev. packages.
Ok, I am going to test it also with tcl8.4/tk8.4 instead of tcl8.5/tk8.5
>
> Hope that you read README.host at least from here
>
> It is necessary to use a separate build tree rather than build
> directly in the source tree. This is enforced by the configure
scripts.
>
> $ mkdir build
> $ cd build
>
That's what I did - except that my new directory is named host and is in
opt (I follow method 2 outlined in README.host).
I then started the configure from within opt/host and got all these
errors at line 2990.
I knew it would not be easy, but hell, I need a working executable of
configtool. Even the most recent snapshot of configtool of 24-Apr-2012
does not work on my Windows 7 /cygwin PC.
Regards - Robert
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread[parent not found: <52D80F2F.90903@gmail.com>]
* Re: [ECOS] No host branch in my checkedout ecos tree
[not found] ` <52D80F2F.90903@gmail.com>
@ 2014-01-16 17:19 ` Sergei Gavrikov
0 siblings, 0 replies; 6+ messages in thread
From: Sergei Gavrikov @ 2014-01-16 17:19 UTC (permalink / raw)
To: Bob Brusa; +Cc: ecos discuss
On Thu, 16 Jan 2014, Bob Brusa wrote:
> Am 16.01.2014 16:19, schrieb Sergei Gavrikov:
> > On Thu, 16 Jan 2014, Bob Brusa wrote:
> >
> >
> > And below does not work in Cygwin?
> >
> > cd /opt
> > cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P ecos
> > cvs -z3 -d :pserver:anoncvs@ecos.sourceware.org:/cvs/ecos co -P host
> >
> Sure, both worked. I also understand now, that ecos and host are modulenames.
> May be I was misled by the layout (see also attachment) as shown on the web
> interface of ecos-cvs. There it looks as if host is simply part of the ecos
> tree. See http://ecos.sourceware.org/cgi-bin/cvsweb.cgi/ecos/?cvsroot=ecos
URL was sufficient, no PNG, please :-)
> > Check that you have set ECOS_REPOSITORY variable.
> >
> > echo $ECOS_REPOSITORY ;# What have you seen?
> >
> This seems ok. I get:
> rwb@w500 /opt
> $ echo $ECOS_REPOSITORY
> /cygdrive/c/cygwin/opt/ecos
Nope! It must be <cygwin_abs_path_name>/ecos/packages
^^^^^^^^
> > > $ c:/cygwin/opt/ecos/host/configure --with-tcl=c:/cygwin/lib/tcl8.5
> > > --with-tk=c:/cygwin/lib/tk8.5
> > [snip]
> > > c:/cygwin/opt/ecos/host/configure: line 2990: test: too many arguments
> >
> > Install Tcl/Tk *8.4* dev. packages.
>
> Ok, I am going to test it also with tcl8.4/tk8.4 instead of tcl8.5/tk8.5
AFAIR, eCos configure checks Tcl/Tk version and expects Tcl/Tk 8.4.
> > Hope that you read README.host at least from here
> >
> > It is necessary to use a separate build tree rather than build
> > directly in the source tree. This is enforced by the configure scripts.
> >
> > $ mkdir build
> > $ cd build
> >
>
> That's what I did - except that my new directory is named host and is
> in opt (I follow method 2 outlined in README.host). I then started
> the configure from within opt/host and got all these errors at line
> 2990. I knew it would not be easy, but hell, I need a working
Use some kind of paste-bin and paste config.log there.
> executable of configtool. The one of 24-Apr-2012 does not work on my
> Windows 7 /cygwin PC.
I afraid that you won't get GUI (configtool), first thing to get is CLI
(ecosconfig). IMO, more bloodless way to get working configtool is to
install Linux on Virtual Machine (virtualbox/vmware).
Sergei
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-01-16 17:19 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-15 16:38 [ECOS] No host branch in my checkedout ecos tree Bob Brusa
2014-01-15 19:35 ` Sergei Gavrikov
2014-01-16 15:48 ` Bob Brusa
2014-01-16 16:20 ` Sergei Gavrikov
2014-01-16 17:03 ` Bob Brusa
[not found] ` <52D80F2F.90903@gmail.com>
2014-01-16 17:19 ` Sergei Gavrikov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).