* [PATCH] Modernize gettext infrastructure
@ 2020-12-15 23:40 Dmitry V. Levin
2020-12-15 23:46 ` Q: splitting the top level .gitignore file Dmitry V. Levin
2020-12-16 14:05 ` [PATCH] Modernize gettext infrastructure Mark Wielaard
0 siblings, 2 replies; 12+ messages in thread
From: Dmitry V. Levin @ 2020-12-15 23:40 UTC (permalink / raw)
To: elfutils-devel
Switch to use AM_GNU_GETTEXT, AM_GNU_GETTEXT_VERSION, and
AM_GNU_GETTEXT_REQUIRE_VERSION, this allows to stop bundling gettext
infrastructure files and let autoreconf invoke autopoint which will set
the gettext infrastructure up.
Use this opportunity to create separate .gitignore files for m4/ and po/
directories.
Tested with
autoreconf -if && ./configure --enable-maintainer-mode && make && make distcheck
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
---
.gitignore | 12 +-
ABOUT-NLS | 1068 ----------------------------------------
ChangeLog | 6 +
configure.ac | 14 +-
m4/.gitignore | 5 +
m4/ChangeLog | 2 +
m4/codeset.m4 | 23 -
m4/gettext.m4 | 401 ---------------
m4/iconv.m4 | 268 ----------
m4/lcmessage.m4 | 32 --
m4/nls.m4 | 31 --
m4/po.m4 | 452 -----------------
m4/progtest.m4 | 92 ----
po/.gitignore | 18 +
po/ChangeLog | 3 +
po/Makefile.in.in | 453 -----------------
po/Makevars | 24 +
po/Rules-quot | 47 --
po/boldquot.sed | 10 -
| 25 -
| 22 -
| 23 -
po/quot.sed | 6 -
po/remove-potcdate.sin | 19 -
24 files changed, 70 insertions(+), 2986 deletions(-)
delete mode 100644 ABOUT-NLS
create mode 100644 m4/.gitignore
delete mode 100644 m4/codeset.m4
delete mode 100644 m4/gettext.m4
delete mode 100644 m4/iconv.m4
delete mode 100644 m4/lcmessage.m4
delete mode 100644 m4/nls.m4
delete mode 100644 m4/po.m4
delete mode 100644 m4/progtest.m4
create mode 100644 po/.gitignore
delete mode 100644 po/Makefile.in.in
delete mode 100644 po/Rules-quot
delete mode 100644 po/boldquot.sed
delete mode 100644 po/en@boldquot.header
delete mode 100644 po/en@quot.header
delete mode 100644 po/insert-header.sin
delete mode 100644 po/quot.sed
delete mode 100644 po/remove-potcdate.sin
diff --git a/.gitignore b/.gitignore
index d737b14d..595760d4 100644
--- a/.gitignore
+++ b/.gitignore
@@ -14,6 +14,7 @@
.deps
.glimpse_*
=*
+/ABOUT-NLS
/INSTALL
Makefile
Makefile.in
@@ -28,6 +29,7 @@ Makefile.in
/config/ar-lib
/config/compile
/config/config.guess
+/config/config.rpath
/config/config.sub
/config/depcomp
/config/install-sh
@@ -47,16 +49,6 @@ Makefile.in
/debuginfod/debuginfod
/debuginfod/debuginfod-find
/libdw/known-dwarf.h
-/po/*.gmo
-/po/*.pot
-/po/en@boldquot.insert-header
-/po/en@boldquot.po
-/po/en@quot.insert-header
-/po/en@quot.po
-/po/Makevars.template
-/po/POTFILES
-/po/remove-potcdate.sed
-/po/stamp-po
/src/addr2line
/src/ar
/src/elfclassify
diff --git a/ABOUT-NLS b/ABOUT-NLS
deleted file mode 100644
index 83bc72ec..00000000
--- a/ABOUT-NLS
+++ /dev/null
@@ -1,1068 +0,0 @@
-1 Notes on the Free Translation Project
-***************************************
-
-Free software is going international! The Free Translation Project is
-a way to get maintainers of free software, translators, and users all
-together, so that free software will gradually become able to speak many
-languages. A few packages already provide translations for their
-messages.
-
- If you found this `ABOUT-NLS' file inside a distribution, you may
-assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site. But you do _not_
-need to install GNU `gettext' prior to configuring, installing or using
-this package with messages translated.
-
- Installers will find here some useful hints. These notes also
-explain how users should proceed for getting the programs to use the
-available translations. They tell how people wanting to contribute and
-work on translations can contact the appropriate team.
-
- When reporting bugs in the `intl/' directory or bugs which may be
-related to internationalization, you should tell about the version of
-`gettext' which is used. The information can be found in the
-`intl/VERSION' file, in internationalized packages.
-
-1.1 Quick configuration advice
-==============================
-
-If you want to exploit the full power of internationalization, you
-should configure it using
-
- ./configure --with-included-gettext
-
-to force usage of internationalizing routines provided within this
-package, despite the existence of internationalizing capabilities in the
-operating system where this package is being installed. So far, only
-the `gettext' implementation in the GNU C library version 2 provides as
-many features (such as locale alias, message inheritance, automatic
-charset conversion or plural form handling) as the implementation here.
-It is also not possible to offer this additional functionality on top
-of a `catgets' implementation. Future versions of GNU `gettext' will
-very likely convey even more functionality. So it might be a good idea
-to change to GNU `gettext' as soon as possible.
-
- So you need _not_ provide this option if you are using GNU libc 2 or
-you have installed a recent copy of the GNU gettext package with the
-included `libintl'.
-
-1.2 INSTALL Matters
-===================
-
-Some packages are "localizable" when properly installed; the programs
-they contain can be made to speak your own native language. Most such
-packages use GNU `gettext'. Other packages have their own ways to
-internationalization, predating GNU `gettext'.
-
- By default, this package will be installed to allow translation of
-messages. It will automatically detect whether the system already
-provides the GNU `gettext' functions. If not, the included GNU
-`gettext' library will be used. This library is wholly contained
-within this package, usually in the `intl/' subdirectory, so prior
-installation of the GNU `gettext' package is _not_ required.
-Installers may use special options at configuration time for changing
-the default behaviour. The commands:
-
- ./configure --with-included-gettext
- ./configure --disable-nls
-
-will, respectively, bypass any pre-existing `gettext' to use the
-internationalizing routines provided within this package, or else,
-_totally_ disable translation of messages.
-
- When you already have GNU `gettext' installed on your system and run
-configure without an option for your new package, `configure' will
-probably detect the previously built and installed `libintl.a' file and
-will decide to use this. This might not be desirable. You should use
-the more recent version of the GNU `gettext' library. I.e. if the file
-`intl/VERSION' shows that the library which comes with this package is
-more recent, you should use
-
- ./configure --with-included-gettext
-
-to prevent auto-detection.
-
- The configuration process will not test for the `catgets' function
-and therefore it will not be used. The reason is that even an
-emulation of `gettext' on top of `catgets' could not provide all the
-extensions of the GNU `gettext' library.
-
- Internationalized packages usually have many `po/LL.po' files, where
-LL gives an ISO 639 two-letter code identifying the language. Unless
-translations have been forbidden at `configure' time by using the
-`--disable-nls' switch, all available translations are installed
-together with the package. However, the environment variable `LINGUAS'
-may be set, prior to configuration, to limit the installed set.
-`LINGUAS' should then contain a space separated list of two-letter
-codes, stating which languages are allowed.
-
-1.3 Using This Package
-======================
-
-As a user, if your language has been installed for this package, you
-only have to set the `LANG' environment variable to the appropriate
-`LL_CC' combination. If you happen to have the `LC_ALL' or some other
-`LC_xxx' environment variables set, you should unset them before
-setting `LANG', otherwise the setting of `LANG' will not have the
-desired effect. Here `LL' is an ISO 639 two-letter language code, and
-`CC' is an ISO 3166 two-letter country code. For example, let's
-suppose that you speak German and live in Germany. At the shell
-prompt, merely execute `setenv LANG de_DE' (in `csh'),
-`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
-This can be done from your `.login' or `.profile' file, once and for
-all.
-
- You might think that the country code specification is redundant.
-But in fact, some languages have dialects in different countries. For
-example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
-country code serves to distinguish the dialects.
-
- The locale naming convention of `LL_CC', with `LL' denoting the
-language and `CC' denoting the country, is the one use on systems based
-on GNU libc. On other systems, some variations of this scheme are
-used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
-locales supported by your system for your language by running the
-command `locale -a | grep '^LL''.
-
- Not all programs have translations for all languages. By default, an
-English message is shown in place of a nonexistent translation. If you
-understand other languages, you can set up a priority list of languages.
-This is done through a different environment variable, called
-`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
-for the purpose of message handling, but you still need to have `LANG'
-set to the primary language; this is required by other parts of the
-system libraries. For example, some Swedish users who would rather
-read translations in German than English for when Swedish is not
-available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
-
- Special advice for Norwegian users: The language code for Norwegian
-bokma*l changed from `no' to `nb' recently (in 2003). During the
-transition period, while some message catalogs for this language are
-installed under `nb' and some older ones under `no', it's recommended
-for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
-older translations are used.
-
- In the `LANGUAGE' environment variable, but not in the `LANG'
-environment variable, `LL_CC' combinations can be abbreviated as `LL'
-to denote the language's main dialect. For example, `de' is equivalent
-to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
-(Portuguese as spoken in Portugal) in this context.
-
-1.4 Translating Teams
-=====================
-
-For the Free Translation Project to be a success, we need interested
-people who like their own language and write it well, and who are also
-able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list. The up-to-date list of
-teams can be found at the Free Translation Project's homepage,
-`http://translationproject.org/', in the "Teams" area.
-
- If you'd like to volunteer to _work_ at translating messages, you
-should become a member of the translating team for your own language.
-The subscribing address is _not_ the same as the list itself, it has
-`-request' appended. For example, speakers of Swedish can send a
-message to `sv-request@li.org', having this message body:
-
- subscribe
-
- Keep in mind that team members are expected to participate
-_actively_ in translations, or at solving translational difficulties,
-rather than merely lurking around. If your team does not exist yet and
-you want to start one, or if you are unsure about what to do or how to
-get started, please write to `coordinator@translationproject.org' to
-reach the coordinator for all translator teams.
-
- The English team is special. It works at improving and uniformizing
-the terminology in use. Proven linguistic skills are praised more than
-programming skills, here.
-
-1.5 Available Packages
-======================
-
-Languages are not equally supported in all packages. The following
-matrix shows the current state of internationalization, as of November
-2007. The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination, with a
-translation percentage of at least 50%.
-
- Ready PO files af am ar az be bg bs ca cs cy da de el en en_GB eo
- +----------------------------------------------------+
- Compendium | [] [] [] [] |
- a2ps | [] [] [] [] [] |
- aegis | () |
- ant-phone | () |
- anubis | [] |
- ap-utils | |
- aspell | [] [] [] [] [] |
- bash | [] |
- bfd | |
- bibshelf | [] |
- binutils | |
- bison | [] [] |
- bison-runtime | [] |
- bluez-pin | [] [] [] [] [] |
- cflow | [] |
- clisp | [] [] [] |
- console-tools | [] [] |
- coreutils | [] [] [] [] |
- cpio | |
- cpplib | [] [] [] |
- cryptonit | [] |
- dialog | |
- diffutils | [] [] [] [] [] [] |
- doodle | [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] |
- fetchmail | [] [] () [] [] |
- findutils | [] |
- findutils_stable | [] [] [] |
- flex | [] [] [] |
- fslint | |
- gas | |
- gawk | [] [] [] |
- gcal | [] |
- gcc | [] |
- gettext-examples | [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] |
- gettext-tools | [] [] |
- gip | [] |
- gliv | [] [] |
- glunarclock | [] |
- gmult | [] [] |
- gnubiff | () |
- gnucash | [] [] () () [] |
- gnuedu | |
- gnulib | [] |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] |
- gpe-aerial | [] [] |
- gpe-beam | [] [] |
- gpe-calendar | |
- gpe-clock | [] [] |
- gpe-conf | [] [] |
- gpe-contacts | |
- gpe-edit | [] |
- gpe-filemanager | |
- gpe-go | [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] |
- gpe-package | |
- gpe-sketchbook | [] [] |
- gpe-su | [] [] |
- gpe-taskmanager | [] [] |
- gpe-timesheet | [] |
- gpe-today | [] [] |
- gpe-todo | |
- gphoto2 | [] [] [] [] |
- gprof | [] [] |
- gpsdrive | |
- gramadoir | [] [] |
- grep | [] [] |
- gretl | () |
- gsasl | |
- gss | |
- gst-plugins-bad | [] [] |
- gst-plugins-base | [] [] |
- gst-plugins-good | [] [] [] |
- gst-plugins-ugly | [] [] |
- gstreamer | [] [] [] [] [] [] [] |
- gtick | () |
- gtkam | [] [] [] [] |
- gtkorphan | [] [] |
- gtkspell | [] [] [] [] |
- gutenprint | [] |
- hello | [] [] [] [] [] |
- herrie | [] |
- hylafax | |
- idutils | [] [] |
- indent | [] [] [] [] |
- iso_15924 | |
- iso_3166 | [] [] [] [] [] [] [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | [] [] [] |
- iso_639 | [] [] [] [] |
- jpilot | [] |
- jtag | |
- jwhois | |
- kbd | [] [] [] [] |
- keytouch | [] [] |
- keytouch-editor | [] |
- keytouch-keyboa... | [] |
- latrine | () |
- ld | [] |
- leafpad | [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] |
- libextractor | [] |
- libgpewidget | [] [] [] |
- libgpg-error | [] |
- libgphoto2 | [] [] |
- libgphoto2_port | [] [] |
- libgsasl | |
- libiconv | [] [] |
- libidn | [] [] [] |
- lifelines | [] () |
- lilypond | [] |
- lingoteach | |
- lprng | |
- lynx | [] [] [] [] |
- m4 | [] [] [] [] |
- mailfromd | |
- mailutils | [] |
- make | [] [] |
- man-db | [] [] [] |
- minicom | [] [] [] |
- nano | [] [] [] |
- opcodes | [] |
- parted | [] [] |
- pilot-qof | |
- popt | [] [] [] |
- psmisc | [] |
- pwdutils | |
- qof | |
- radius | [] |
- recode | [] [] [] [] [] [] |
- rpm | [] |
- screem | |
- scrollkeeper | [] [] [] [] [] [] [] [] |
- sed | [] [] [] |
- shared-mime-info | [] [] [] [] () [] [] [] |
- sharutils | [] [] [] [] [] [] |
- shishi | |
- skencil | [] () |
- solfege | |
- soundtracker | [] [] |
- sp | [] |
- system-tools-ba... | [] [] [] [] [] [] [] [] [] |
- tar | [] [] |
- texinfo | [] [] [] |
- tin | () () |
- tuxpaint | [] [] [] [] [] [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux | [] [] [] [] |
- util-linux-ng | [] [] [] [] |
- vorbis-tools | [] |
- wastesedge | () |
- wdiff | [] [] [] [] |
- wget | [] [] [] |
- xchat | [] [] [] [] [] [] [] |
- xkeyboard-config | [] |
- xpad | [] [] [] |
- +----------------------------------------------------+
- af am ar az be bg bs ca cs cy da de el en en_GB eo
- 6 0 2 1 8 26 2 40 48 2 56 88 15 1 15 18
-
- es et eu fa fi fr ga gl gu he hi hr hu id is it
- +--------------------------------------------------+
- Compendium | [] [] [] [] [] |
- a2ps | [] [] [] () |
- aegis | |
- ant-phone | [] |
- anubis | [] |
- ap-utils | [] [] |
- aspell | [] [] [] |
- bash | [] |
- bfd | [] [] |
- bibshelf | [] [] [] |
- binutils | [] [] [] |
- bison | [] [] [] [] [] [] |
- bison-runtime | [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] |
- cflow | [] |
- clisp | [] [] |
- console-tools | |
- coreutils | [] [] [] [] [] [] |
- cpio | [] [] [] |
- cpplib | [] [] |
- cryptonit | [] |
- dialog | [] [] [] |
- diffutils | [] [] [] [] [] [] [] [] [] |
- doodle | [] [] |
- e2fsprogs | [] [] [] |
- enscript | [] [] [] |
- fetchmail | [] |
- findutils | [] [] [] |
- findutils_stable | [] [] [] [] |
- flex | [] [] [] |
- fslint | |
- gas | [] [] |
- gawk | [] [] [] [] () |
- gcal | [] [] |
- gcc | [] |
- gettext-examples | [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] |
- gip | [] [] [] [] |
- gliv | () |
- glunarclock | [] [] [] |
- gmult | [] [] [] |
- gnubiff | () () |
- gnucash | () () () |
- gnuedu | [] |
- gnulib | [] [] [] |
- gnunet | |
- gnunet-gtk | |
- gnutls | |
- gpe-aerial | [] [] |
- gpe-beam | [] [] |
- gpe-calendar | |
- gpe-clock | [] [] [] [] |
- gpe-conf | [] |
- gpe-contacts | [] [] |
- gpe-edit | [] [] [] [] |
- gpe-filemanager | [] |
- gpe-go | [] [] [] |
- gpe-login | [] [] [] |
- gpe-ownerinfo | [] [] [] [] [] |
- gpe-package | [] |
- gpe-sketchbook | [] [] |
- gpe-su | [] [] [] [] |
- gpe-taskmanager | [] [] [] |
- gpe-timesheet | [] [] [] [] |
- gpe-today | [] [] [] [] |
- gpe-todo | [] |
- gphoto2 | [] [] [] [] [] |
- gprof | [] [] [] [] [] |
- gpsdrive | [] |
- gramadoir | [] [] |
- grep | [] [] [] |
- gretl | [] [] [] () |
- gsasl | [] [] |
- gss | [] [] |
- gst-plugins-bad | [] [] [] [] |
- gst-plugins-base | [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] |
- gstreamer | [] [] [] |
- gtick | [] [] [] |
- gtkam | [] [] [] [] |
- gtkorphan | [] [] |
- gtkspell | [] [] [] [] [] [] [] |
- gutenprint | [] |
- hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
- herrie | [] |
- hylafax | |
- idutils | [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] [] [] [] |
- iso_15924 | [] |
- iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] |
- iso_3166_2 | [] |
- iso_4217 | [] [] [] [] [] [] |
- iso_639 | [] [] [] [] [] [] |
- jpilot | [] [] |
- jtag | [] |
- jwhois | [] [] [] [] [] |
- kbd | [] [] |
- keytouch | [] [] [] |
- keytouch-editor | [] |
- keytouch-keyboa... | [] [] |
- latrine | [] [] |
- ld | [] [] [] [] |
- leafpad | [] [] [] [] [] [] |
- libc | [] [] [] [] [] |
- libexif | [] |
- libextractor | [] |
- libgpewidget | [] [] [] [] [] |
- libgpg-error | [] |
- libgphoto2 | [] [] [] |
- libgphoto2_port | [] [] |
- libgsasl | [] [] |
- libiconv | [] [] [] |
- libidn | [] [] |
- lifelines | () |
- lilypond | [] [] [] |
- lingoteach | [] [] [] |
- lprng | |
- lynx | [] [] [] |
- m4 | [] [] [] [] |
- mailfromd | |
- mailutils | [] [] |
- make | [] [] [] [] [] [] [] [] |
- man-db | [] |
- minicom | [] [] [] [] |
- nano | [] [] [] [] [] [] [] |
- opcodes | [] [] [] [] |
- parted | [] [] [] |
- pilot-qof | |
- popt | [] [] [] [] |
- psmisc | [] [] |
- pwdutils | |
- qof | [] |
- radius | [] [] |
- recode | [] [] [] [] [] [] [] [] |
- rpm | [] [] |
- screem | |
- scrollkeeper | [] [] [] |
- sed | [] [] [] [] [] |
- shared-mime-info | [] [] [] [] [] [] |
- sharutils | [] [] [] [] [] [] [] [] |
- shishi | [] |
- skencil | [] [] |
- solfege | [] |
- soundtracker | [] [] [] |
- sp | [] |
- system-tools-ba... | [] [] [] [] [] [] [] [] [] |
- tar | [] [] [] [] [] |
- texinfo | [] [] [] |
- tin | [] () |
- tuxpaint | [] [] |
- unicode-han-tra... | |
- unicode-transla... | [] [] |
- util-linux | [] [] [] [] [] [] [] |
- util-linux-ng | [] [] [] [] [] [] [] |
- vorbis-tools | |
- wastesedge | () |
- wdiff | [] [] [] [] [] [] [] [] |
- wget | [] [] [] [] [] [] [] [] |
- xchat | [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] [] |
- xpad | [] [] [] |
- +--------------------------------------------------+
- es et eu fa fi fr ga gl gu he hi hr hu id is it
- 85 22 14 2 48 101 61 12 2 8 2 6 53 29 1 52
-
- ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn
- +--------------------------------------------------+
- Compendium | [] |
- a2ps | () [] [] |
- aegis | () |
- ant-phone | [] |
- anubis | [] [] [] |
- ap-utils | [] |
- aspell | [] [] |
- bash | [] |
- bfd | |
- bibshelf | [] |
- binutils | |
- bison | [] [] [] |
- bison-runtime | [] [] [] |
- bluez-pin | [] [] [] |
- cflow | |
- clisp | [] |
- console-tools | |
- coreutils | [] |
- cpio | [] |
- cpplib | [] |
- cryptonit | [] |
- dialog | [] [] |
- diffutils | [] [] [] |
- doodle | |
- e2fsprogs | [] |
- enscript | [] |
- fetchmail | [] [] |
- findutils | [] |
- findutils_stable | [] |
- flex | [] [] |
- fslint | |
- gas | |
- gawk | [] [] |
- gcal | |
- gcc | |
- gettext-examples | [] [] [] |
- gettext-runtime | [] [] [] |
- gettext-tools | [] [] |
- gip | [] [] |
- gliv | [] |
- glunarclock | [] [] |
- gmult | [] [] [] |
- gnubiff | |
- gnucash | () () () |
- gnuedu | |
- gnulib | [] [] |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] |
- gpe-aerial | [] |
- gpe-beam | [] |
- gpe-calendar | [] |
- gpe-clock | [] [] [] |
- gpe-conf | [] [] [] |
- gpe-contacts | [] |
- gpe-edit | [] [] [] |
- gpe-filemanager | [] [] |
- gpe-go | [] [] [] |
- gpe-login | [] [] [] |
- gpe-ownerinfo | [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] |
- gpe-su | [] [] [] |
- gpe-taskmanager | [] [] [] [] |
- gpe-timesheet | [] |
- gpe-today | [] [] |
- gpe-todo | [] |
- gphoto2 | [] [] |
- gprof | [] |
- gpsdrive | [] |
- gramadoir | () |
- grep | [] [] |
- gretl | |
- gsasl | [] |
- gss | |
- gst-plugins-bad | [] |
- gst-plugins-base | [] |
- gst-plugins-good | [] |
- gst-plugins-ugly | [] |
- gstreamer | [] |
- gtick | [] |
- gtkam | [] [] |
- gtkorphan | [] |
- gtkspell | [] [] |
- gutenprint | [] |
- hello | [] [] [] [] [] [] [] |
- herrie | [] |
- hylafax | |
- idutils | [] |
- indent | [] [] |
- iso_15924 | [] |
- iso_3166 | [] [] [] [] [] [] [] [] |
- iso_3166_2 | [] |
- iso_4217 | [] [] [] |
- iso_639 | [] [] [] [] |
- jpilot | () () |
- jtag | |
- jwhois | [] |
- kbd | [] |
- keytouch | [] |
- keytouch-editor | [] |
- keytouch-keyboa... | |
- latrine | [] |
- ld | |
- leafpad | [] [] |
- libc | [] [] [] |
- libexif | |
- libextractor | |
- libgpewidget | [] |
- libgpg-error | |
- libgphoto2 | [] |
- libgphoto2_port | [] |
- libgsasl | [] |
- libiconv | [] |
- libidn | [] [] |
- lifelines | [] |
- lilypond | [] |
- lingoteach | [] |
- lprng | |
- lynx | [] [] |
- m4 | [] [] |
- mailfromd | |
- mailutils | |
- make | [] [] [] |
- man-db | |
- minicom | [] |
- nano | [] [] [] |
- opcodes | [] |
- parted | [] [] |
- pilot-qof | |
- popt | [] [] [] |
- psmisc | [] [] [] |
- pwdutils | |
- qof | |
- radius | |
- recode | [] |
- rpm | [] [] |
- screem | [] |
- scrollkeeper | [] [] [] [] |
- sed | [] [] |
- shared-mime-info | [] [] [] [] [] [] [] |
- sharutils | [] [] |
- shishi | |
- skencil | |
- solfege | () () |
- soundtracker | |
- sp | () |
- system-tools-ba... | [] [] [] [] |
- tar | [] [] [] |
- texinfo | [] [] |
- tin | |
- tuxpaint | () [] [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux | [] [] |
- util-linux-ng | [] [] |
- vorbis-tools | |
- wastesedge | [] |
- wdiff | [] [] |
- wget | [] [] |
- xchat | [] [] [] [] |
- xkeyboard-config | [] [] [] |
- xpad | [] [] [] |
- +--------------------------------------------------+
- ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn
- 51 2 25 3 2 0 6 0 2 2 20 0 11 1 103 6
-
- or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
- +--------------------------------------------------+
- Compendium | [] [] [] [] [] |
- a2ps | () [] [] [] [] [] [] |
- aegis | () () |
- ant-phone | [] [] |
- anubis | [] [] [] |
- ap-utils | () |
- aspell | [] [] [] |
- bash | [] [] |
- bfd | |
- bibshelf | [] |
- binutils | [] [] |
- bison | [] [] [] [] [] |
- bison-runtime | [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] [] [] [] |
- cflow | [] |
- clisp | [] |
- console-tools | [] |
- coreutils | [] [] [] [] |
- cpio | [] [] [] |
- cpplib | [] |
- cryptonit | [] [] |
- dialog | [] |
- diffutils | [] [] [] [] [] [] |
- doodle | [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] [] |
- fetchmail | [] [] [] |
- findutils | [] [] [] |
- findutils_stable | [] [] [] [] [] [] |
- flex | [] [] [] [] [] |
- fslint | [] |
- gas | |
- gawk | [] [] [] [] |
- gcal | [] |
- gcc | [] [] |
- gettext-examples | [] [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] [] [] [] |
- gip | [] [] [] [] |
- gliv | [] [] [] [] [] [] |
- glunarclock | [] [] [] [] [] [] |
- gmult | [] [] [] [] |
- gnubiff | () [] |
- gnucash | () [] |
- gnuedu | |
- gnulib | [] [] [] |
- gnunet | |
- gnunet-gtk | [] |
- gnutls | [] [] |
- gpe-aerial | [] [] [] [] [] [] [] |
- gpe-beam | [] [] [] [] [] [] [] |
- gpe-calendar | [] [] [] [] |
- gpe-clock | [] [] [] [] [] [] [] [] |
- gpe-conf | [] [] [] [] [] [] [] |
- gpe-contacts | [] [] [] [] [] |
- gpe-edit | [] [] [] [] [] [] [] [] [] |
- gpe-filemanager | [] [] |
- gpe-go | [] [] [] [] [] [] [] [] |
- gpe-login | [] [] [] [] [] [] [] [] |
- gpe-ownerinfo | [] [] [] [] [] [] [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] [] [] [] [] [] [] |
- gpe-su | [] [] [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] [] [] [] |
- gpe-timesheet | [] [] [] [] [] [] [] [] |
- gpe-today | [] [] [] [] [] [] [] [] |
- gpe-todo | [] [] [] [] |
- gphoto2 | [] [] [] [] [] [] |
- gprof | [] [] [] |
- gpsdrive | [] [] |
- gramadoir | [] [] |
- grep | [] [] [] [] |
- gretl | [] [] [] |
- gsasl | [] [] [] |
- gss | [] [] [] [] |
- gst-plugins-bad | [] [] [] |
- gst-plugins-base | [] [] |
- gst-plugins-good | [] [] |
- gst-plugins-ugly | [] [] [] |
- gstreamer | [] [] [] [] |
- gtick | [] |
- gtkam | [] [] [] [] [] |
- gtkorphan | [] |
- gtkspell | [] [] [] [] [] [] [] [] |
- gutenprint | [] |
- hello | [] [] [] [] [] [] [] [] |
- herrie | [] [] [] |
- hylafax | |
- idutils | [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] |
- iso_15924 | |
- iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | [] [] [] [] [] [] [] |
- iso_639 | [] [] [] [] [] [] [] |
- jpilot | |
- jtag | [] |
- jwhois | [] [] [] [] |
- kbd | [] [] [] |
- keytouch | [] |
- keytouch-editor | [] |
- keytouch-keyboa... | [] |
- latrine | |
- ld | [] |
- leafpad | [] [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] [] |
- libextractor | [] [] |
- libgpewidget | [] [] [] [] [] [] [] [] |
- libgpg-error | [] [] [] |
- libgphoto2 | [] |
- libgphoto2_port | [] [] [] |
- libgsasl | [] [] [] [] |
- libiconv | [] [] [] |
- libidn | [] [] () |
- lifelines | [] [] |
- lilypond | |
- lingoteach | [] |
- lprng | [] |
- lynx | [] [] [] |
- m4 | [] [] [] [] [] |
- mailfromd | [] |
- mailutils | [] [] [] |
- make | [] [] [] [] |
- man-db | [] [] [] [] |
- minicom | [] [] [] [] [] |
- nano | [] [] [] [] |
- opcodes | [] [] |
- parted | [] |
- pilot-qof | |
- popt | [] [] [] [] |
- psmisc | [] [] |
- pwdutils | [] [] |
- qof | [] [] |
- radius | [] [] |
- recode | [] [] [] [] [] [] [] |
- rpm | [] [] [] [] |
- screem | |
- scrollkeeper | [] [] [] [] [] [] [] |
- sed | [] [] [] [] [] [] [] [] [] |
- shared-mime-info | [] [] [] [] [] [] |
- sharutils | [] [] [] [] |
- shishi | [] |
- skencil | [] [] [] |
- solfege | [] |
- soundtracker | [] [] |
- sp | |
- system-tools-ba... | [] [] [] [] [] [] [] [] [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] [] |
- tin | () |
- tuxpaint | [] [] [] [] [] [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux | [] [] [] [] |
- util-linux-ng | [] [] [] [] |
- vorbis-tools | [] |
- wastesedge | |
- wdiff | [] [] [] [] [] [] [] |
- wget | [] [] [] [] |
- xchat | [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] |
- xpad | [] [] [] |
- +--------------------------------------------------+
- or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
- 0 5 77 31 53 4 58 72 3 45 46 9 45 122 3
-
- tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
- +---------------------------------------------------+
- Compendium | [] [] [] [] | 19
- a2ps | [] [] [] | 19
- aegis | [] | 1
- ant-phone | [] [] | 6
- anubis | [] [] [] | 11
- ap-utils | () [] | 4
- aspell | [] [] [] | 16
- bash | [] | 6
- bfd | | 2
- bibshelf | [] | 7
- binutils | [] [] [] [] | 9
- bison | [] [] [] [] | 20
- bison-runtime | [] [] [] [] | 18
- bluez-pin | [] [] [] [] [] [] | 28
- cflow | [] [] | 5
- clisp | | 9
- console-tools | [] [] | 5
- coreutils | [] [] [] | 18
- cpio | [] [] [] [] | 11
- cpplib | [] [] [] [] [] | 12
- cryptonit | [] | 6
- dialog | [] [] [] | 9
- diffutils | [] [] [] [] [] | 29
- doodle | [] | 6
- e2fsprogs | [] [] | 10
- enscript | [] [] [] | 16
- fetchmail | [] [] | 12
- findutils | [] [] [] | 11
- findutils_stable | [] [] [] [] | 18
- flex | [] [] | 15
- fslint | [] | 2
- gas | [] | 3
- gawk | [] [] [] | 16
- gcal | [] | 5
- gcc | [] [] [] | 7
- gettext-examples | [] [] [] [] [] [] | 29
- gettext-runtime | [] [] [] [] [] [] | 28
- gettext-tools | [] [] [] [] [] | 20
- gip | [] [] | 13
- gliv | [] [] | 11
- glunarclock | [] [] [] | 15
- gmult | [] [] [] [] | 16
- gnubiff | [] | 2
- gnucash | () [] | 5
- gnuedu | [] | 2
- gnulib | [] | 10
- gnunet | | 0
- gnunet-gtk | [] [] | 3
- gnutls | | 4
- gpe-aerial | [] [] | 14
- gpe-beam | [] [] | 14
- gpe-calendar | [] [] | 7
- gpe-clock | [] [] [] [] | 21
- gpe-conf | [] [] [] | 16
- gpe-contacts | [] [] | 10
- gpe-edit | [] [] [] [] [] | 22
- gpe-filemanager | [] [] | 7
- gpe-go | [] [] [] [] | 19
- gpe-login | [] [] [] [] [] | 21
- gpe-ownerinfo | [] [] [] [] | 21
- gpe-package | [] | 6
- gpe-sketchbook | [] [] | 16
- gpe-su | [] [] [] [] | 21
- gpe-taskmanager | [] [] [] [] | 21
- gpe-timesheet | [] [] [] [] | 18
- gpe-today | [] [] [] [] [] | 21
- gpe-todo | [] [] | 8
- gphoto2 | [] [] [] [] | 21
- gprof | [] [] | 13
- gpsdrive | [] | 5
- gramadoir | [] | 7
- grep | [] | 12
- gretl | | 6
- gsasl | [] [] [] | 9
- gss | [] | 7
- gst-plugins-bad | [] [] [] | 13
- gst-plugins-base | [] [] | 11
- gst-plugins-good | [] [] [] [] [] | 16
- gst-plugins-ugly | [] [] [] | 13
- gstreamer | [] [] [] | 18
- gtick | [] [] | 7
- gtkam | [] | 16
- gtkorphan | [] | 7
- gtkspell | [] [] [] [] [] [] | 27
- gutenprint | | 4
- hello | [] [] [] [] [] | 38
- herrie | [] [] | 8
- hylafax | | 0
- idutils | [] [] | 15
- indent | [] [] [] [] [] | 28
- iso_15924 | [] [] | 4
- iso_3166 | [] [] [] [] [] [] [] [] [] | 54
- iso_3166_2 | [] [] | 4
- iso_4217 | [] [] [] [] [] | 24
- iso_639 | [] [] [] [] [] | 26
- jpilot | [] [] [] [] | 7
- jtag | [] | 3
- jwhois | [] [] [] | 13
- kbd | [] [] [] | 13
- keytouch | [] | 8
- keytouch-editor | [] | 5
- keytouch-keyboa... | [] | 5
- latrine | [] [] | 5
- ld | [] [] [] [] | 10
- leafpad | [] [] [] [] [] | 24
- libc | [] [] [] | 19
- libexif | [] | 5
- libextractor | [] | 5
- libgpewidget | [] [] [] | 20
- libgpg-error | [] | 6
- libgphoto2 | [] [] | 9
- libgphoto2_port | [] [] [] | 11
- libgsasl | [] | 8
- libiconv | [] [] | 11
- libidn | [] [] | 11
- lifelines | | 4
- lilypond | [] | 6
- lingoteach | [] | 6
- lprng | [] | 2
- lynx | [] [] [] | 15
- m4 | [] [] [] | 18
- mailfromd | [] [] | 3
- mailutils | [] [] | 8
- make | [] [] [] | 20
- man-db | [] | 9
- minicom | [] | 14
- nano | [] [] [] | 20
- opcodes | [] [] | 10
- parted | [] [] [] | 11
- pilot-qof | [] | 1
- popt | [] [] [] [] | 18
- psmisc | [] [] | 10
- pwdutils | [] | 3
- qof | [] | 4
- radius | [] [] | 7
- recode | [] [] [] | 25
- rpm | [] [] [] [] | 13
- screem | [] | 2
- scrollkeeper | [] [] [] [] | 26
- sed | [] [] [] [] | 23
- shared-mime-info | [] [] [] | 29
- sharutils | [] [] [] | 23
- shishi | [] | 3
- skencil | [] | 7
- solfege | [] | 3
- soundtracker | [] [] | 9
- sp | [] | 3
- system-tools-ba... | [] [] [] [] [] [] [] | 38
- tar | [] [] [] | 17
- texinfo | [] [] [] | 15
- tin | | 1
- tuxpaint | [] [] [] | 19
- unicode-han-tra... | | 0
- unicode-transla... | | 2
- util-linux | [] [] [] | 20
- util-linux-ng | [] [] [] | 20
- vorbis-tools | [] [] | 4
- wastesedge | | 1
- wdiff | [] [] | 23
- wget | [] [] [] | 20
- xchat | [] [] [] [] | 29
- xkeyboard-config | [] [] [] | 14
- xpad | [] [] [] | 15
- +---------------------------------------------------+
- 76 teams tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
- 163 domains 0 3 1 74 51 0 143 21 1 57 7 45 0 2036
-
- Some counters in the preceding matrix are higher than the number of
-visible blocks let us expect. This is because a few extra PO files are
-used for implementing regional variants of languages, or language
-dialects.
-
- For a PO file in the matrix above to be effective, the package to
-which it applies should also have been internationalized and
-distributed as such by its maintainer. There might be an observable
-lag between the mere existence a PO file and its wide availability in a
-distribution.
-
- If November 2007 seems to be old, you may fetch a more recent copy
-of this `ABOUT-NLS' file on most GNU archive sites. The most
-up-to-date matrix with full percentage details can be found at
-`http://translationproject.org/extra/matrix.html'.
-
-1.6 Using `gettext' in new packages
-===================================
-
-If you are writing a freely available program and want to
-internationalize it you are welcome to use GNU `gettext' in your
-package. Of course you have to respect the GNU Library General Public
-License which covers the use of the GNU `gettext' library. This means
-in particular that even non-free programs can use `libintl' as a shared
-library, whereas only free software can use `libintl' as a static
-library or use modified versions of `libintl'.
-
- Once the sources are changed appropriately and the setup can handle
-the use of `gettext' the only thing missing are the translations. The
-Free Translation Project is also available for packages which are not
-developed inside the GNU project. Therefore the information given above
-applies also for every other Free Software Project. Contact
-`coordinator@translationproject.org' to make the `.pot' files available
-to the translation teams.
-
diff --git a/ChangeLog b/ChangeLog
index 46568f04..072a7853 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,11 @@
2020-12-15 Dmitry V. Levin <ldv@altlinux.org>
+ * configure.ac (USE_NLS, AM_PO_SUBDIRS): Remove.
+ (AM_GNU_GETTEXT, AM_GNU_GETTEXT_VERSION,
+ AM_GNU_GETTEXT_REQUIRE_VERSION): Use these macros to setup the gettext
+ infrastructure.
+ * .gitignore: Update.
+
* Makefile.am (SUBDIRS): Remove m4.
* configure.ac (AC_CONFIG_FILES): Remove m4/Makefile.
diff --git a/configure.ac b/configure.ac
index 2d977f28..60747bc8 100644
--- a/configure.ac
+++ b/configure.ac
@@ -588,10 +588,16 @@ AC_CONFIG_FILES([tests/Makefile])
dnl pkgconfig files
AC_CONFIG_FILES([config/libelf.pc config/libdw.pc config/libdebuginfod.pc])
-# Get the definitions necessary to create the Makefiles in the po
-# subdirectories. This is a small subset of the gettext rules.
-AC_SUBST(USE_NLS, yes)
-AM_PO_SUBDIRS
+dnl As long as "git grep 'PRI[diouxX]' po" reports matches in
+dnl translatable strings, we must use need-formatstring-macros here.
+AM_GNU_GETTEXT([external], [need-formatstring-macros])
+
+dnl AM_GNU_GETTEXT_VERSION is still needed for old versions
+dnl of autoreconf that do not recognize AM_GNU_GETTEXT_REQUIRE_VERSION.
+dnl 0.19.6 is the first version of gettext that provides
+dnl AM_GNU_GETTEXT_REQUIRE_VERSION support.
+AM_GNU_GETTEXT_VERSION([0.19.6])
+AM_GNU_GETTEXT_REQUIRE_VERSION([0.19.6])
dnl Appended to the config.h file.
dnl We hide all kinds of configuration magic in lib/eu-config.h.
diff --git a/m4/.gitignore b/m4/.gitignore
new file mode 100644
index 00000000..9ed35690
--- /dev/null
+++ b/m4/.gitignore
@@ -0,0 +1,5 @@
+/*.m4
+!/ax_check_compile_flag.m4
+!/ax_cxx_compile_stdcxx.m4
+!/biarch.m4
+!/zip.m4
diff --git a/m4/ChangeLog b/m4/ChangeLog
index 78b1bbc9..32832693 100644
--- a/m4/ChangeLog
+++ b/m4/ChangeLog
@@ -1,5 +1,7 @@
2020-12-15 Dmitry V. Levin <ldv@altlinux.org>
+ * .gitignore: New file.
+
* Makefile.am: Remove.
2019-10-28 Aaron Merey <amerey@redhat.com>
diff --git a/m4/codeset.m4 b/m4/codeset.m4
deleted file mode 100644
index 59535ebc..00000000
--- a/m4/codeset.m4
+++ /dev/null
@@ -1,23 +0,0 @@
-# codeset.m4 serial AM1 (gettext-0.10.40)
-dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
-dnl This file is free software, distributed under the terms of the GNU
-dnl General Public License. As a special exception to the GNU General
-dnl Public License, this file may be distributed as part of a program
-dnl that contains a configuration script generated by Autoconf, under
-dnl the same distribution terms as the rest of that program.
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_LANGINFO_CODESET],
-[
- AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
- [AC_TRY_LINK([#include <langinfo.h>],
- [char* cs = nl_langinfo(CODESET);],
- am_cv_langinfo_codeset=yes,
- am_cv_langinfo_codeset=no)
- ])
- if test $am_cv_langinfo_codeset = yes; then
- AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
- [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
- fi
-])
diff --git a/m4/gettext.m4 b/m4/gettext.m4
deleted file mode 100644
index 8d1f0665..00000000
--- a/m4/gettext.m4
+++ /dev/null
@@ -1,401 +0,0 @@
-# gettext.m4 serial 66 (gettext-0.18.2)
-dnl Copyright (C) 1995-2013 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
-
-dnl Macro to add for using GNU gettext.
-
-dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
-dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
-dnl default (if it is not specified or empty) is 'no-libtool'.
-dnl INTLSYMBOL should be 'external' for packages with no intl directory,
-dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
-dnl If INTLSYMBOL is 'use-libtool', then a libtool library
-dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
-dnl depending on --{enable,disable}-{shared,static} and on the presence of
-dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
-dnl $(top_builddir)/intl/libintl.a will be created.
-dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
-dnl implementations (in libc or libintl) without the ngettext() function
-dnl will be ignored. If NEEDSYMBOL is specified and is
-dnl 'need-formatstring-macros', then GNU gettext implementations that don't
-dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
-dnl INTLDIR is used to find the intl libraries. If empty,
-dnl the value '$(top_builddir)/intl/' is used.
-dnl
-dnl The result of the configuration is one of three cases:
-dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
-dnl and used.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 2) GNU gettext has been found in the system's C library.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 3) No internationalization, always use English msgid.
-dnl Catalog format: none
-dnl Catalog extension: none
-dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
-dnl The use of .gmo is historical (it was needed to avoid overwriting the
-dnl GNU format catalogs when building on a platform with an X/Open gettext),
-dnl but we keep it in order not to force irrelevant filename changes on the
-dnl maintainers.
-dnl
-AC_DEFUN([AM_GNU_GETTEXT],
-[
- dnl Argument checking.
- ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
- [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
-])])])])])
- ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
- [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])])
- ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
- [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
-])])])])
- define([gt_included_intl],
- ifelse([$1], [external],
- ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
- [yes]))
- define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
- gt_NEEDS_INIT
- AM_GNU_GETTEXT_NEED([$2])
-
- AC_REQUIRE([AM_PO_SUBDIRS])dnl
- ifelse(gt_included_intl, yes, [
- AC_REQUIRE([AM_INTL_SUBDIR])dnl
- ])
-
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- dnl Ideally we would do this search only after the
- dnl if test "$USE_NLS" = "yes"; then
- dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
- dnl the configure script would need to contain the same shell code
- dnl again, outside any 'if'. There are two solutions:
- dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
- dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
- dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
- dnl documented, we avoid it.
- ifelse(gt_included_intl, yes, , [
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
- ])
-
- dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation.
- gt_INTL_MACOSX
-
- dnl Set USE_NLS.
- AC_REQUIRE([AM_NLS])
-
- ifelse(gt_included_intl, yes, [
- BUILD_INCLUDED_LIBINTL=no
- USE_INCLUDED_LIBINTL=no
- ])
- LIBINTL=
- LTLIBINTL=
- POSUB=
-
- dnl Add a version number to the cache macros.
- case " $gt_needs " in
- *" need-formatstring-macros "*) gt_api_version=3 ;;
- *" need-ngettext "*) gt_api_version=2 ;;
- *) gt_api_version=1 ;;
- esac
- gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
- gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- gt_use_preinstalled_gnugettext=no
- ifelse(gt_included_intl, yes, [
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH([included-gettext],
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- ])
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If GNU gettext is available we use this. Else we have
- dnl to fall back to GNU NLS library.
-
- if test $gt_api_version -ge 3; then
- gt_revision_test_code='
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-#endif
-changequote(,)dnl
-typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-changequote([,])dnl
-'
- else
- gt_revision_test_code=
- fi
- if test $gt_api_version -ge 2; then
- gt_expression_test_code=' + * ngettext ("", "", 0)'
- else
- gt_expression_test_code=
- fi
-
- AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
- [AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern int *_nl_domain_bindings;
- ]],
- [[
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
- ]])],
- [eval "$gt_func_gnugettext_libc=yes"],
- [eval "$gt_func_gnugettext_libc=no"])])
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- ifelse(gt_included_intl, yes, , [
- AM_ICONV_LINK
- ])
- dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
- dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
- dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
- dnl even if libiconv doesn't exist.
- AC_LIB_LINKFLAGS_BODY([intl])
- AC_CACHE_CHECK([for GNU gettext in libintl],
- [$gt_func_gnugettext_libintl],
- [gt_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $INCINTL"
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBINTL"
- dnl Now see whether libintl exists and does not depend on libiconv.
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
- ]],
- [[
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ]])],
- [eval "$gt_func_gnugettext_libintl=yes"],
- [eval "$gt_func_gnugettext_libintl=no"])
- dnl Now see whether libintl exists and depends on libiconv.
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
- LIBS="$LIBS $LIBICONV"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
- ]],
- [[
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ]])],
- [LIBINTL="$LIBINTL $LIBICONV"
- LTLIBINTL="$LTLIBINTL $LTLIBICONV"
- eval "$gt_func_gnugettext_libintl=yes"
- ])
- fi
- CPPFLAGS="$gt_save_CPPFLAGS"
- LIBS="$gt_save_LIBS"])
- fi
-
- dnl If an already present or preinstalled GNU gettext() is found,
- dnl use it. But if this macro is used in GNU gettext, and GNU
- dnl gettext is already preinstalled in libintl, we update this
- dnl libintl. (Cf. the install rule in intl/Makefile.in.)
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
- || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
- && test "$PACKAGE" != gettext-runtime \
- && test "$PACKAGE" != gettext-tools; }; then
- gt_use_preinstalled_gnugettext=yes
- else
- dnl Reset the values set by searching for libintl.
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- fi
-
- ifelse(gt_included_intl, yes, [
- if test "$gt_use_preinstalled_gnugettext" != "yes"; then
- dnl GNU gettext is not found in the C library.
- dnl Fall back on included GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- BUILD_INCLUDED_LIBINTL=yes
- USE_INCLUDED_LIBINTL=yes
- LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
- LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
- LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
- fi
-
- CATOBJEXT=
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions to use GNU gettext tools.
- CATOBJEXT=.gmo
- fi
- ])
-
- if test -n "$INTL_MACOSX_LIBS"; then
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Some extra flags are needed during linking.
- LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
- LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
- fi
- fi
-
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- AC_DEFINE([ENABLE_NLS], [1],
- [Define to 1 if translation of program messages to the user's native language
- is requested.])
- else
- USE_NLS=no
- fi
- fi
-
- AC_MSG_CHECKING([whether to use NLS])
- AC_MSG_RESULT([$USE_NLS])
- if test "$USE_NLS" = "yes"; then
- AC_MSG_CHECKING([where the gettext function comes from])
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- gt_source="external libintl"
- else
- gt_source="libc"
- fi
- else
- gt_source="included intl directory"
- fi
- AC_MSG_RESULT([$gt_source])
- fi
-
- if test "$USE_NLS" = "yes"; then
-
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- AC_MSG_CHECKING([how to link with libintl])
- AC_MSG_RESULT([$LIBINTL])
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
- fi
-
- dnl For backward compatibility. Some packages may be using this.
- AC_DEFINE([HAVE_GETTEXT], [1],
- [Define if the GNU gettext() function is already present or preinstalled.])
- AC_DEFINE([HAVE_DCGETTEXT], [1],
- [Define if the GNU dcgettext() function is already present or preinstalled.])
- fi
-
- dnl We need to process the po/ directory.
- POSUB=po
- fi
-
- ifelse(gt_included_intl, yes, [
- dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
- dnl to 'yes' because some of the testsuite requires it.
- if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
- BUILD_INCLUDED_LIBINTL=yes
- fi
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST([BUILD_INCLUDED_LIBINTL])
- AC_SUBST([USE_INCLUDED_LIBINTL])
- AC_SUBST([CATOBJEXT])
-
- dnl For backward compatibility. Some configure.ins may be using this.
- nls_cv_header_intl=
- nls_cv_header_libgt=
-
- dnl For backward compatibility. Some Makefiles may be using this.
- DATADIRNAME=share
- AC_SUBST([DATADIRNAME])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INSTOBJEXT=.mo
- AC_SUBST([INSTOBJEXT])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- GENCAT=gencat
- AC_SUBST([GENCAT])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INTLOBJS=
- if test "$USE_INCLUDED_LIBINTL" = yes; then
- INTLOBJS="\$(GETTOBJS)"
- fi
- AC_SUBST([INTLOBJS])
-
- dnl Enable libtool support if the surrounding package wishes it.
- INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
- AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX])
- ])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INTLLIBS="$LIBINTL"
- AC_SUBST([INTLLIBS])
-
- dnl Make all documented variables known to autoconf.
- AC_SUBST([LIBINTL])
- AC_SUBST([LTLIBINTL])
- AC_SUBST([POSUB])
-])
-
-
-dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
-m4_define([gt_NEEDS_INIT],
-[
- m4_divert_text([DEFAULTS], [gt_needs=])
- m4_define([gt_NEEDS_INIT], [])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
-AC_DEFUN([AM_GNU_GETTEXT_NEED],
-[
- m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
-AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
diff --git a/m4/iconv.m4 b/m4/iconv.m4
deleted file mode 100644
index a5036465..00000000
--- a/m4/iconv.m4
+++ /dev/null
@@ -1,268 +0,0 @@
-# iconv.m4 serial 18 (gettext-0.18.2)
-dnl Copyright (C) 2000-2002, 2007-2013 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
-[
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([iconv])
-])
-
-AC_DEFUN([AM_ICONV_LINK],
-[
- dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
- dnl those with the standalone portable GNU libiconv installed).
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
-
- dnl Add $INCICONV to CPPFLAGS before performing the following checks,
- dnl because if the user has installed libiconv and not disabled its use
- dnl via --without-libiconv-prefix, he wants to use it. The first
- dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed.
- am_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-
- AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <stdlib.h>
-#include <iconv.h>
- ]],
- [[iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);]])],
- [am_cv_func_iconv=yes])
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- AC_LINK_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <stdlib.h>
-#include <iconv.h>
- ]],
- [[iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);]])],
- [am_cv_lib_iconv=yes]
- [am_cv_func_iconv=yes])
- LIBS="$am_save_LIBS"
- fi
- ])
- if test "$am_cv_func_iconv" = yes; then
- AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
- dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11,
- dnl Solaris 10.
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- AC_RUN_IFELSE(
- [AC_LANG_SOURCE([[
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- int result = 0;
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- result |= 1;
- iconv_close (cd_utf8_to_88591);
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- result |= 2;
- iconv_close (cd_ascii_to_88591);
- }
- }
- /* Test against AIX 6.1..7.1 bug: Buffer overrun. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304";
- static char buf[2] = { (char)0xDE, (char)0xAD };
- const char *inptr = input;
- size_t inbytesleft = 1;
- char *outptr = buf;
- size_t outbytesleft = 1;
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
- result |= 4;
- iconv_close (cd_88591_to_utf8);
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- result |= 8;
- iconv_close (cd_88591_to_utf8);
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- result |= 16;
- return result;
-}]])],
- [am_cv_func_iconv_works=yes],
- [am_cv_func_iconv_works=no],
- [
-changequote(,)dnl
- case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac
-changequote([,])dnl
- ])
- LIBS="$am_save_LIBS"
- ])
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
- AC_DEFINE([HAVE_ICONV], [1],
- [Define if you have the iconv() function and it works.])
- fi
- if test "$am_cv_lib_iconv" = yes; then
- AC_MSG_CHECKING([how to link with libiconv])
- AC_MSG_RESULT([$LIBICONV])
- else
- dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
- dnl either.
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
- AC_SUBST([LIBICONV])
- AC_SUBST([LTLIBICONV])
-])
-
-dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
-dnl avoid warnings like
-dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
-dnl This is tricky because of the way 'aclocal' is implemented:
-dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
-dnl Otherwise aclocal's initial scan pass would miss the macro definition.
-dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
-dnl Otherwise aclocal would emit many "Use of uninitialized value $1"
-dnl warnings.
-m4_define([gl_iconv_AC_DEFUN],
- m4_version_prereq([2.64],
- [[AC_DEFUN_ONCE(
- [$1], [$2])]],
- [m4_ifdef([gl_00GNULIB],
- [[AC_DEFUN_ONCE(
- [$1], [$2])]],
- [[AC_DEFUN(
- [$1], [$2])]])]))
-gl_iconv_AC_DEFUN([AM_ICONV],
-[
- AM_ICONV_LINK
- if test "$am_cv_func_iconv" = yes; then
- AC_MSG_CHECKING([for iconv declaration])
- AC_CACHE_VAL([am_cv_proto_iconv], [
- AC_COMPILE_IFELSE(
- [AC_LANG_PROGRAM(
- [[
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
- ]],
- [[]])],
- [am_cv_proto_iconv_arg1=""],
- [am_cv_proto_iconv_arg1="const"])
- am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
- am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
- AC_MSG_RESULT([
- $am_cv_proto_iconv])
- AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
- [Define as const if the declaration of iconv() needs const.])
- dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>.
- m4_ifdef([gl_ICONV_H_DEFAULTS],
- [AC_REQUIRE([gl_ICONV_H_DEFAULTS])
- if test -n "$am_cv_proto_iconv_arg1"; then
- ICONV_CONST="const"
- fi
- ])
- fi
-])
diff --git a/m4/lcmessage.m4 b/m4/lcmessage.m4
deleted file mode 100644
index ffbf915f..00000000
--- a/m4/lcmessage.m4
+++ /dev/null
@@ -1,32 +0,0 @@
-# lcmessage.m4 serial 2 (gettext-0.10.40)
-dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
-dnl This file is free software, distributed under the terms of the GNU
-dnl General Public License. As a special exception to the GNU General
-dnl Public License, this file may be distributed as part of a program
-dnl that contains a configuration script generated by Autoconf, under
-dnl the same distribution terms as the rest of that program.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-
-AC_DEFUN([AM_LC_MESSAGES],
- [if test $ac_cv_header_locale_h = yes; then
- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
- if test $am_cv_val_LC_MESSAGES = yes; then
- AC_DEFINE(HAVE_LC_MESSAGES, 1,
- [Define if your <locale.h> file defines LC_MESSAGES.])
- fi
- fi])
diff --git a/m4/nls.m4 b/m4/nls.m4
deleted file mode 100644
index 7967cc2f..00000000
--- a/m4/nls.m4
+++ /dev/null
@@ -1,31 +0,0 @@
-# nls.m4 serial 3 (gettext-0.15)
-dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ(2.50)
-
-AC_DEFUN([AM_NLS],
-[
- AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE(nls,
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT($USE_NLS)
- AC_SUBST(USE_NLS)
-])
diff --git a/m4/po.m4 b/m4/po.m4
deleted file mode 100644
index f3957234..00000000
--- a/m4/po.m4
+++ /dev/null
@@ -1,452 +0,0 @@
-# po.m4 serial 20 (gettext-0.18.2)
-dnl Copyright (C) 1995-2013 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.60])
-
-dnl Checks for all prerequisites of the po subdirectory.
-AC_DEFUN([AM_PO_SUBDIRS],
-[
- AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
- AC_REQUIRE([AC_PROG_MKDIR_P])dnl
- AC_REQUIRE([AM_NLS])dnl
-
- dnl Release version of the gettext macros. This is used to ensure that
- dnl the gettext macros and po/Makefile.in.in are in sync.
- AC_SUBST([GETTEXT_MACRO_VERSION], [0.18])
-
- dnl Perform the following tests also if --disable-nls has been given,
- dnl because they are needed for "make dist" to work.
-
- dnl Search for GNU msgfmt in the PATH.
- dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
- dnl The second test excludes FreeBSD msgfmt.
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
-
- dnl Test whether it is GNU msgfmt >= 0.15.
-changequote(,)dnl
- case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
- *) MSGFMT_015=$MSGFMT ;;
- esac
-changequote([,])dnl
- AC_SUBST([MSGFMT_015])
-changequote(,)dnl
- case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
- *) GMSGFMT_015=$GMSGFMT ;;
- esac
-changequote([,])dnl
- AC_SUBST([GMSGFMT_015])
-
- dnl Search for GNU xgettext 0.12 or newer in the PATH.
- dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
- dnl The second test excludes FreeBSD xgettext.
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- dnl Remove leftover from FreeBSD xgettext call.
- rm -f messages.po
-
- dnl Test whether it is GNU xgettext >= 0.15.
-changequote(,)dnl
- case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
- *) XGETTEXT_015=$XGETTEXT ;;
- esac
-changequote([,])dnl
- AC_SUBST([XGETTEXT_015])
-
- dnl Search for GNU msgmerge 0.11 or newer in the PATH.
- AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
- [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
-
- dnl Installation directories.
- dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
- dnl have to define it here, so that it can be used in po/Makefile.
- test -n "$localedir" || localedir='${datadir}/locale'
- AC_SUBST([localedir])
-
- dnl Support for AM_XGETTEXT_OPTION.
- test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
- AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
-
- AC_CONFIG_COMMANDS([po-directories], [[
- for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- # Treat a directory as a PO directory if and only if it has a
- # POTFILES.in file. This allows packages to have multiple PO
- # directories under different names or in different locations.
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- gt_tab=`printf '\t'`
- cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
- POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
- # on $ac_dir but don't depend on user-specified configuration
- # parameters.
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- # Hide the ALL_LINGUAS assignment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # The set of available languages was given in configure.in.
- # Hide the ALL_LINGUAS assignment from automake < 1.5.
- eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- done
- fi
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
- if test -f "$f"; then
- case "$f" in
- *.orig | *.bak | *~) ;;
- *) cat "$f" >> "$ac_dir/Makefile" ;;
- esac
- fi
- done
- fi
- ;;
- esac
- done]],
- [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
- # from automake < 1.5.
- eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
- # Capture the value of LINGUAS because we need it to compute CATALOGS.
- LINGUAS="${LINGUAS-%UNSET%}"
- ])
-])
-
-dnl Postprocesses a Makefile in a directory containing PO files.
-AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
-[
- # When this code is run, in config.status, two variables have already been
- # set:
- # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
- # - LINGUAS is the value of the environment variable LINGUAS at configure
- # time.
-
-changequote(,)dnl
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
-
- # Find a way to echo strings without interpreting backslash.
- if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='echo'
- else
- if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='printf %s\n'
- else
- echo_func () {
- cat <<EOT
-$*
-EOT
- }
- gt_echo='echo_func'
- fi
- fi
-
- # A sed script that extracts the value of VARIABLE from a Makefile.
- tab=`printf '\t'`
- sed_x_variable='
-# Test if the hold space is empty.
-x
-s/P/P/
-x
-ta
-# Yes it was empty. Look if we have the expected variable definition.
-/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
- # Seen the first line of the variable definition.
- s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
- ba
-}
-bd
-:a
-# Here we are processing a line from the variable definition.
-# Remove comment, more precisely replace it with a space.
-s/#.*$/ /
-# See if the line ends in a backslash.
-tb
-:b
-s/\\$//
-# Print the line, without the trailing backslash.
-p
-tc
-# There was no trailing backslash. The end of the variable definition is
-# reached. Clear the hold space.
-s/^.*$//
-x
-bd
-:c
-# A trailing backslash means that the variable definition continues in the
-# next line. Put a nonempty string into the hold space to indicate this.
-s/^.*$/P/
-x
-:d
-'
-changequote([,])dnl
-
- # Set POTFILES to the value of the Makefile variable POTFILES.
- sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
- POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
- # Compute POTFILES_DEPS as
- # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
- POTFILES_DEPS=
- for file in $POTFILES; do
- POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
- done
- POMAKEFILEDEPS=""
-
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
- sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
- ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
- fi
- # Hide the ALL_LINGUAS assignment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- # Compute PROPERTIESFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
- # Compute CLASSFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
- # Compute QMFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
- # Compute MSGFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
- # Compute RESOURCESDLLFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- PROPERTIESFILES=
- CLASSFILES=
- QMFILES=
- MSGFILES=
- RESOURCESDLLFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
- CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
- QMFILES="$QMFILES $srcdirpre$lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- JAVACATALOGS=
- QTCATALOGS=
- TCLCATALOGS=
- CSHARPCATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
- QTCATALOGS="$QTCATALOGS $lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
- done
- fi
-
- sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
- tab=`printf '\t'`
- if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang.msg: $lang.po
-${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
-${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
-${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
-${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if test -n "$POMAKEFILEDEPS"; then
- cat >> "$ac_file.tmp" <<EOF
-Makefile: $POMAKEFILEDEPS
-EOF
- fi
- mv "$ac_file.tmp" "$ac_file"
-])
-
-dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
-AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
-[
- XGETTEXT_EXTRA_OPTIONS=
-])
-
-dnl Registers an option to be passed to xgettext in the po subdirectory.
-AC_DEFUN([AM_XGETTEXT_OPTION],
-[
- AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
- XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
-])
diff --git a/m4/progtest.m4 b/m4/progtest.m4
deleted file mode 100644
index a56365cd..00000000
--- a/m4/progtest.m4
+++ /dev/null
@@ -1,92 +0,0 @@
-# progtest.m4 serial 4 (gettext-0.14.2)
-dnl Copyright (C) 1996-2003, 2005 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-AC_PREREQ(2.50)
-
-# Search path for a program which passes the given test.
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN([AM_PATH_PROG_WITH_TEST],
-[
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
- [[\\/]]* | ?:[[\\/]]*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
- AC_MSG_RESULT([$]$1)
-else
- AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
diff --git a/po/.gitignore b/po/.gitignore
new file mode 100644
index 00000000..67b1779e
--- /dev/null
+++ b/po/.gitignore
@@ -0,0 +1,18 @@
+/*.gmo
+/*.pot
+/Makefile.in.in
+/Makevars.template
+/POTFILES
+/Rules-quot
+/boldquot.sed
+/en@boldquot.header
+/en@boldquot.insert-header
+/en@boldquot.po
+/en@quot.header
+/en@quot.insert-header
+/en@quot.po
+/insert-header.sin
+/quot.sed
+/remove-potcdate.sed
+/remove-potcdate.sin
+/stamp-po
diff --git a/po/ChangeLog b/po/ChangeLog
index 36d618a5..434859e8 100644
--- a/po/ChangeLog
+++ b/po/ChangeLog
@@ -1,5 +1,8 @@
2020-12-15 Dmitry V. Levin <ldv@altlinux.org>
+ * Makevars: Sync with Makevars.template.
+ * .gitignore: New file.
+
* fr.po: Remove empty translation file.
* it.po: Likewise.
* nl.po: Likewise.
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
deleted file mode 100644
index fce63a6e..00000000
--- a/po/Makefile.in.in
+++ /dev/null
@@ -1,453 +0,0 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-#
-# Origin: gettext-0.18.2
-GETTEXT_MACRO_VERSION = 0.18
-
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-
-SHELL = /bin/sh
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-datarootdir = @datarootdir@
-datadir = @datadir@
-localedir = @localedir@
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-
-# We use $(mkdir_p).
-# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
-# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
-# @install_sh@ does not start with $(SHELL), so we add it.
-# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
-# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
-# versions, $(mkinstalldirs) and $(install_sh) are unused.
-mkinstalldirs = $(SHELL) @install_sh@ -d
-install_sh = $(SHELL) @install_sh@
-MKDIR_P = @MKDIR_P@
-mkdir_p = @mkdir_p@
-
-GMSGFMT_ = @GMSGFMT@
-GMSGFMT_no = @GMSGFMT@
-GMSGFMT_yes = @GMSGFMT_015@
-GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
-MSGFMT_ = @MSGFMT@
-MSGFMT_no = @MSGFMT@
-MSGFMT_yes = @MSGFMT_015@
-MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
-XGETTEXT_ = @XGETTEXT@
-XGETTEXT_no = @XGETTEXT@
-XGETTEXT_yes = @XGETTEXT_015@
-XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = @MSGMERGE@ --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-# Makevars gets inserted here. (Don't remove this line!)
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
-
-.po.mo:
- @echo "$(MSGFMT) -c -o $@ $<"; \
- $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
- @lang=`echo $* | sed -e 's,.*/,,'`; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
- cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
- sed -e '/^#/d' $< > t-$@
- mv t-$@ $@
-
-
-all: all-@USE_NLS@
-
-all-yes: stamp-po
-all-no:
-
-# Ensure that the gettext macros and this Makefile.in.in are in sync.
-CHECK_MACRO_VERSION = \
- test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
- || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
- exit 1; \
- }
-
-# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
-# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
-# we don't want to bother translators with empty POT files). We assume that
-# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
-# In this case, stamp-po is a nop (i.e. a phony target).
-
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
- @$(CHECK_MACRO_VERSION)
- test ! -f $(srcdir)/$(DOMAIN).pot || \
- test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
- @test ! -f $(srcdir)/$(DOMAIN).pot || { \
- echo "touch stamp-po" && \
- echo timestamp > stamp-poT && \
- mv stamp-poT stamp-po; \
- }
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
-# The determination of whether the package xyz is a GNU one is based on the
-# heuristic whether some file in the top level directory mentions "GNU xyz".
-# If GNU 'find' is available, we avoid grepping through monster files.
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
- if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
- LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
- else \
- LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
- fi; \
- } | grep -v 'libtool:' >/dev/null; then \
- package_gnu='GNU '; \
- else \
- package_gnu=''; \
- fi; \
- if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
- msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
- else \
- msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
- fi; \
- case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --msgid-bugs-address="$$msgid_bugs_address" \
- ;; \
- *) \
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --package-name="$${package_gnu}@PACKAGE@" \
- --package-version='@VERSION@' \
- --msgid-bugs-address="$$msgid_bugs_address" \
- ;; \
- esac
- test ! -f $(DOMAIN).po || { \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
- sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
- if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
- else \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- else \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- }
-
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
-$(srcdir)/$(DOMAIN).pot:
- $(MAKE) $(DOMAIN).pot-update
-
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
-$(POFILES): $(srcdir)/$(DOMAIN).pot
- @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
- if test -f "$(srcdir)/$${lang}.po"; then \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
- cd $(srcdir) \
- && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
- $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
- *) \
- $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
- esac; \
- }; \
- else \
- $(MAKE) $${lang}.po-create; \
- fi
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- for file in $(DISTFILES.common) Makevars.template; do \
- $(INSTALL_DATA) $(srcdir)/$$file \
- $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- for file in Makevars; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-install-data-no: all
-install-data-yes: all
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
- $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
- echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
- fi; \
- done; \
- done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
- else \
- : ; \
- fi
-installdirs-data-no:
-installdirs-data-yes:
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkdir_p) $(DESTDIR)$$dir; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- fi; \
- done; \
- done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- for file in $(DISTFILES.common) Makevars.template; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-uninstall-data-no:
-uninstall-data-yes:
- catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- done; \
- done
-
-check: all
-
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
-
-mostlyclean:
- rm -f remove-potcdate.sed
- rm -f stamp-poT
- rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
- rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
- rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
- rm -f stamp-po $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
- $(MAKE) update-po
- @$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: stamp-po $(DISTFILES)
- dists="$(DISTFILES)"; \
- if test "$(PACKAGE)" = "gettext-tools"; then \
- dists="$$dists Makevars.template"; \
- fi; \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- dists="$$dists $(DOMAIN).pot stamp-po"; \
- fi; \
- if test -f $(srcdir)/ChangeLog; then \
- dists="$$dists ChangeLog"; \
- fi; \
- for i in 0 1 2 3 4 5 6 7 8 9; do \
- if test -f $(srcdir)/ChangeLog.$$i; then \
- dists="$$dists ChangeLog.$$i"; \
- fi; \
- done; \
- if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
- for file in $$dists; do \
- if test -f $$file; then \
- cp -p $$file $(distdir) || exit 1; \
- else \
- cp -p $(srcdir)/$$file $(distdir) || exit 1; \
- fi; \
- done
-
-update-po: Makefile
- $(MAKE) $(DOMAIN).pot-update
- test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
- $(MAKE) update-gmo
-
-# General rule for creating PO files.
-
-.nop.po-create:
- @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
- echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
- exit 1
-
-# General rule for updating PO files.
-
-.nop.po-update:
- @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
- if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
- tmpdir=`pwd`; \
- echo "$$lang:"; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
- cd $(srcdir); \
- if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
- $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
- *) \
- $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
- esac; \
- }; then \
- if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
- rm -f $$tmpdir/$$lang.new.po; \
- else \
- if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
- :; \
- else \
- echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
- exit 1; \
- fi; \
- fi; \
- else \
- echo "msgmerge for $$lang.po failed!" 1>&2; \
- rm -f $$tmpdir/$$lang.new.po; \
- fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
- @:
-
-# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
-# because execution permission bits may not work on the current file system.
-# Use @SHELL@, which is the shell determined by autoconf for the use by its
-# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
-Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
- cd $(top_builddir) \
- && @SHELL@ ./config.status $(subdir)/$@.in po-directories
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/po/Makevars b/po/Makevars
index 0afcf4ea..086de588 100644
--- a/po/Makevars
+++ b/po/Makevars
@@ -41,3 +41,27 @@ MSGID_BUGS_ADDRESS = https://sourceware.org/bugzilla/
# This is the list of locale categories, beyond LC_MESSAGES, for which the
# message catalogs shall be used. It is usually empty.
EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context. Possible values are "yes" and "no". Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = no
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+# --previous to keep previous msgids of translated messages,
+# --quiet to reduce the verbosity.
+MSGMERGE_OPTIONS =
+
+# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
+# has changed. Possible values are "yes" and "no". Set this to no if
+# the POT file is checked in the repository and the version control
+# program ignores timestamps.
+PO_DEPENDS_ON_POT = yes
+
+# This tells whether or not to forcibly update $(DOMAIN).pot and
+# regenerate PO files on "make dist". Possible values are "yes" and
+# "no". Set this to no if the POT file and PO files are maintained
+# externally.
+DIST_DEPENDS_ON_UPDATE_PO = yes
diff --git a/po/Rules-quot b/po/Rules-quot
deleted file mode 100644
index 9c2a995e..00000000
--- a/po/Rules-quot
+++ /dev/null
@@ -1,47 +0,0 @@
-# Special Makefile rules for English message catalogs with quotation marks.
-
-DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
-
-.SUFFIXES: .insert-header .po-update-en
-
-en@quot.po-create:
- $(MAKE) en@quot.po-update
-en@boldquot.po-create:
- $(MAKE) en@boldquot.po-update
-
-en@quot.po-update: en@quot.po-update-en
-en@boldquot.po-update: en@boldquot.po-update-en
-
-.insert-header.po-update-en:
- @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
- if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
- tmpdir=`pwd`; \
- echo "$$lang:"; \
- ll=`echo $$lang | sed -e 's/@.*//'`; \
- LC_ALL=C; export LC_ALL; \
- cd $(srcdir); \
- if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
- if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
- rm -f $$tmpdir/$$lang.new.po; \
- else \
- if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
- :; \
- else \
- echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
- exit 1; \
- fi; \
- fi; \
- else \
- echo "creation of $$lang.po failed!" 1>&2; \
- rm -f $$tmpdir/$$lang.new.po; \
- fi
-
-en@quot.insert-header: insert-header.sin
- sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
-
-en@boldquot.insert-header: insert-header.sin
- sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
-
-mostlyclean: mostlyclean-quot
-mostlyclean-quot:
- rm -f *.insert-header
diff --git a/po/boldquot.sed b/po/boldquot.sed
deleted file mode 100644
index 4b937aa5..00000000
--- a/po/boldquot.sed
+++ /dev/null
@@ -1,10 +0,0 @@
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
-s/“/“^[[1m/g
-s/”/^[[0m”/g
-s/‘/‘^[[1m/g
-s/’/^[[0m’/g
diff --git a/po/en@boldquot.header b/po/en@boldquot.header
deleted file mode 100644
index fedb6a06..00000000
--- a/po/en@boldquot.header
+++ /dev/null
@@ -1,25 +0,0 @@
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
-# This catalog furthermore displays the text between the quotation marks in
-# bold face, assuming the VT100/XTerm escape sequences.
-#
diff --git a/po/en@quot.header b/po/en@quot.header
deleted file mode 100644
index a9647fc3..00000000
--- a/po/en@quot.header
+++ /dev/null
@@ -1,22 +0,0 @@
-# All this catalog "translates" are quotation characters.
-# The msgids must be ASCII and therefore cannot contain real quotation
-# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
-# and double quote (0x22). These substitutes look strange; see
-# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
-#
-# This catalog translates grave accent (0x60) and apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019).
-# It also translates pairs of apostrophe (0x27) to
-# left single quotation mark (U+2018) and right single quotation mark (U+2019)
-# and pairs of quotation mark (0x22) to
-# left double quotation mark (U+201C) and right double quotation mark (U+201D).
-#
-# When output to an UTF-8 terminal, the quotation characters appear perfectly.
-# When output to an ISO-8859-1 terminal, the single quotation marks are
-# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
-# grave/acute accent (by libiconv), and the double quotation marks are
-# transliterated to 0x22.
-# When output to an ASCII terminal, the single quotation marks are
-# transliterated to apostrophes, and the double quotation marks are
-# transliterated to 0x22.
-#
diff --git a/po/insert-header.sin b/po/insert-header.sin
deleted file mode 100644
index b26de01f..00000000
--- a/po/insert-header.sin
+++ /dev/null
@@ -1,23 +0,0 @@
-# Sed script that inserts the file called HEADER before the header entry.
-#
-# At each occurrence of a line starting with "msgid ", we execute the following
-# commands. At the first occurrence, insert the file. At the following
-# occurrences, do nothing. The distinction between the first and the following
-# occurrences is achieved by looking at the hold space.
-/^msgid /{
-x
-# Test if the hold space is empty.
-s/m/m/
-ta
-# Yes it was empty. First occurrence. Read the file.
-r HEADER
-# Output the file's contents by reading the next line. But don't lose the
-# current line while doing this.
-g
-N
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
diff --git a/po/quot.sed b/po/quot.sed
deleted file mode 100644
index 0122c463..00000000
--- a/po/quot.sed
+++ /dev/null
@@ -1,6 +0,0 @@
-s/"\([^"]*\)"/“\1”/g
-s/`\([^`']*\)'/‘\1’/g
-s/ '\([^`']*\)' / ‘\1’ /g
-s/ '\([^`']*\)'$/ ‘\1’/g
-s/^'\([^`']*\)' /‘\1’ /g
-s/“”/""/g
diff --git a/po/remove-potcdate.sin b/po/remove-potcdate.sin
deleted file mode 100644
index 2436c49e..00000000
--- a/po/remove-potcdate.sin
+++ /dev/null
@@ -1,19 +0,0 @@
-# Sed script that remove the POT-Creation-Date line in the header entry
-# from a POT file.
-#
-# The distinction between the first and the following occurrences of the
-# pattern is achieved by looking at the hold space.
-/^"POT-Creation-Date: .*"$/{
-x
-# Test if the hold space is empty.
-s/P/P/
-ta
-# Yes it was empty. First occurrence. Remove the line.
-g
-d
-bb
-:a
-# The hold space was nonempty. Following occurrences. Do nothing.
-x
-:b
-}
--
ldv
^ permalink raw reply [flat|nested] 12+ messages in thread
* Q: splitting the top level .gitignore file
2020-12-15 23:40 [PATCH] Modernize gettext infrastructure Dmitry V. Levin
@ 2020-12-15 23:46 ` Dmitry V. Levin
2020-12-16 13:44 ` Mark Wielaard
2020-12-16 14:05 ` [PATCH] Modernize gettext infrastructure Mark Wielaard
1 sibling, 1 reply; 12+ messages in thread
From: Dmitry V. Levin @ 2020-12-15 23:46 UTC (permalink / raw)
To: elfutils-devel
On Wed, Dec 16, 2020 at 02:40:32AM +0300, Dmitry V. Levin wrote:
[...]
> Use this opportunity to create separate .gitignore files for m4/ and po/
> directories.
By the way, what do you think about moving subdirectory parts of the top
level .gitignore file into subdirectories? This would be consistent with
ChangeLog files, currently one has to update the top level ChangeLog file
when the top level .gitignore file is changed in a way that affects
specific subdirectories only.
--
ldv
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Q: splitting the top level .gitignore file
2020-12-15 23:46 ` Q: splitting the top level .gitignore file Dmitry V. Levin
@ 2020-12-16 13:44 ` Mark Wielaard
2020-12-20 12:11 ` [PATCH 1/2] Split " Dmitry V. Levin
2020-12-20 12:11 ` [PATCH 2/2] Update .gitignore files Dmitry V. Levin
0 siblings, 2 replies; 12+ messages in thread
From: Mark Wielaard @ 2020-12-16 13:44 UTC (permalink / raw)
To: Dmitry V. Levin, elfutils-devel
Hi Dmitry,
On Wed, 2020-12-16 at 02:46 +0300, Dmitry V. Levin wrote:
> By the way, what do you think about moving subdirectory parts of the top
> level .gitignore file into subdirectories? This would be consistent with
> ChangeLog files, currently one has to update the top level ChangeLog file
> when the top level .gitignore file is changed in a way that affects
> specific subdirectories only.
Yes, I think it would make sense to have .gitignore files per subdir. I
don't know how to keep that easily up to date though. I normally use
srcdir != builddir setups and so don't immediately see when there are
generated files in the srcdir.
Thanks,
Mark
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] Modernize gettext infrastructure
2020-12-15 23:40 [PATCH] Modernize gettext infrastructure Dmitry V. Levin
2020-12-15 23:46 ` Q: splitting the top level .gitignore file Dmitry V. Levin
@ 2020-12-16 14:05 ` Mark Wielaard
2020-12-16 14:59 ` Dmitry V. Levin
1 sibling, 1 reply; 12+ messages in thread
From: Mark Wielaard @ 2020-12-16 14:05 UTC (permalink / raw)
To: Dmitry V. Levin, elfutils-devel
Hi Dmitry,
On Wed, 2020-12-16 at 02:40 +0300, Dmitry V. Levin wrote:
> Switch to use AM_GNU_GETTEXT, AM_GNU_GETTEXT_VERSION, and
> AM_GNU_GETTEXT_REQUIRE_VERSION, this allows to stop bundling gettext
> infrastructure files and let autoreconf invoke autopoint which will
> set the gettext infrastructure up.
This is a good idea. And as far as I can see this is correct.
But it does mean for a git checkout people now need to have gettext-
tools installed (but not for a released build). I don't know if all the
buildbot workers have it installed, so when you do check it in please
keep an eye on
https://builder.wildebeest.org/buildbot/#/builders?tags=elfutils
It might also be an idea to list the maintainer dependencies in the
README file (we don't currently list any others though).
Thanks,
Mark
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] Modernize gettext infrastructure
2020-12-16 14:05 ` [PATCH] Modernize gettext infrastructure Mark Wielaard
@ 2020-12-16 14:59 ` Dmitry V. Levin
2020-12-16 15:10 ` Mark Wielaard
0 siblings, 1 reply; 12+ messages in thread
From: Dmitry V. Levin @ 2020-12-16 14:59 UTC (permalink / raw)
To: Mark Wielaard; +Cc: elfutils-devel
Hi Mark,
On Wed, Dec 16, 2020 at 03:05:54PM +0100, Mark Wielaard wrote:
> Hi Dmitry,
>
> On Wed, 2020-12-16 at 02:40 +0300, Dmitry V. Levin wrote:
> > Switch to use AM_GNU_GETTEXT, AM_GNU_GETTEXT_VERSION, and
> > AM_GNU_GETTEXT_REQUIRE_VERSION, this allows to stop bundling gettext
> > infrastructure files and let autoreconf invoke autopoint which will
> > set the gettext infrastructure up.
>
> This is a good idea. And as far as I can see this is correct.
>
> But it does mean for a git checkout people now need to have gettext-
> tools installed (but not for a released build).
I suppose people are used to it nowadays, given that AM_GNU_GETTEXT
and AM_GNU_GETTEXT_VERSION are quite widespread macros.
> I don't know if all the
> buildbot workers have it installed, so when you do check it in please
> keep an eye on
> https://builder.wildebeest.org/buildbot/#/builders?tags=elfutils
Is there a way to find it out beforehand?
--
ldv
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] Modernize gettext infrastructure
2020-12-16 14:59 ` Dmitry V. Levin
@ 2020-12-16 15:10 ` Mark Wielaard
0 siblings, 0 replies; 12+ messages in thread
From: Mark Wielaard @ 2020-12-16 15:10 UTC (permalink / raw)
To: Dmitry V. Levin; +Cc: elfutils-devel
Hi Dmitry,
On Wed, 2020-12-16 at 17:59 +0300, Dmitry V. Levin wrote:
> > I don't know if all the
> > buildbot workers have it installed, so when you do check it in please
> > keep an eye on
> > https://builder.wildebeest.org/buildbot/#/builders?tags=elfutils
>
> Is there a way to find it out beforehand?
No, sorry, not at the moment. You'll just have to push and see.
I'll see if I can add try-server support to the buildbot this end-of-
year vacation, but no promises.
If there are issues on any of the buildbots that aren't clear then
shell access can be arranged, but different people maintain different
machines.
Cheers,
Mark
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] Split top level .gitignore file
2020-12-16 13:44 ` Mark Wielaard
@ 2020-12-20 12:11 ` Dmitry V. Levin
2020-12-20 15:28 ` Mark Wielaard
2020-12-20 12:11 ` [PATCH 2/2] Update .gitignore files Dmitry V. Levin
1 sibling, 1 reply; 12+ messages in thread
From: Dmitry V. Levin @ 2020-12-20 12:11 UTC (permalink / raw)
To: elfutils-devel
Move subdirectory parts of the top level .gitignore into appropriate
subdirectories. This would be consistent with ChangeLog files,
currently one has to update the top level ChangeLog file when the top
level .gitignore file is changed in a way that affects specific
subdirectories only.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
---
.gitignore | 157 +-----------------------------------------
ChangeLog | 4 ++
backends/.gitignore | 1 +
backends/ChangeLog | 4 ++
config/.gitignore | 13 ++++
config/ChangeLog | 4 ++
debuginfod/.gitignore | 2 +
debuginfod/ChangeLog | 4 ++
libcpu/.gitignore | 5 ++
libcpu/ChangeLog | 4 ++
libdw/.gitignore | 1 +
libdw/ChangeLog | 4 ++
src/.gitignore | 17 +++++
src/ChangeLog | 4 ++
tests/.gitignore | 112 ++++++++++++++++++++++++++++++
tests/ChangeLog | 4 ++
16 files changed, 185 insertions(+), 155 deletions(-)
create mode 100644 backends/.gitignore
create mode 100644 config/.gitignore
create mode 100644 debuginfod/.gitignore
create mode 100644 libcpu/.gitignore
create mode 100644 libdw/.gitignore
create mode 100644 src/.gitignore
create mode 100644 tests/.gitignore
diff --git a/.gitignore b/.gitignore
index 595760d4..0055ddae 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,4 +1,3 @@
-#*
*#
*.a
*.o
@@ -8,175 +7,23 @@
*.rej
*.so
*.so.1
-*/Makefile.in
*~
.#*
.deps
.glimpse_*
=*
-/ABOUT-NLS
-/INSTALL
Makefile
Makefile.in
+/ABOUT-NLS
+/INSTALL
/aclocal.m4
/autom4te.*
-/backends/*.map
/config.cache
/config.h
/config.h.in
/config.log
/config.status
-/config/ar-lib
-/config/compile
-/config/config.guess
-/config/config.rpath
-/config/config.sub
-/config/depcomp
-/config/install-sh
-/config/libdw.pc
-/config/libelf.pc
-/config/libdebuginfod.pc
-/config/missing
-/config/test-driver
-/config/ylwrap
/configure
/elfutils.spec
-/libcpu/*_dis.h
-/libcpu/*.mnemonics
-/libcpu/*_gendis
-/libcpu/*_lex.c
-/libcpu/*_parse.[ch]
-/debuginfod/debuginfod
-/debuginfod/debuginfod-find
-/libdw/known-dwarf.h
-/src/addr2line
-/src/ar
-/src/elfclassify
-/src/elfcmp
-/src/elfcompress
-/src/elflint
-/src/findtextrel
-/src/make-debug-archive
-/src/nm
-/src/objdump
-/src/ranlib
-/src/readelf
-/src/size
-/src/stack
-/src/strings
-/src/strip
-/src/unstrip
/stamp-h1
-/tests/*.log
-/tests/*.trs
-/tests/addrcfi
-/tests/addrscopes
-/tests/addsections
-/tests/aggregate_size
-/tests/alldts
-/tests/all-dwarf-ranges
-/tests/allfcts
-/tests/allregs
-/tests/arextract
-/tests/arls
-/tests/arsymtest
-/tests/asm-tst1
-/tests/asm-tst2
-/tests/asm-tst3
-/tests/asm-tst4
-/tests/asm-tst5
-/tests/asm-tst6
-/tests/asm-tst7
-/tests/asm-tst8
-/tests/asm-tst9
-/tests/attr-integrate-skel
-/tests/backtrace
-/tests/backtrace-child
-/tests/backtrace-child-biarch
-/tests/backtrace-data
-/tests/backtrace-dwarf
-/tests/buildid
-/tests/debugaltlink
-/tests/debuginfod_build_id_find
-/tests/debuglink
-/tests/deleted
-/tests/dwarfcfi
-/tests/dwarf_default_lower_bound
-/tests/dwarf-die-addr-die
-/tests/dwarf-getmacros
-/tests/dwarf-getstring
-/tests/dwarf-ranges
-/tests/dwelf_elf_e_machine_string
-/tests/dwelfgnucompressed
-/tests/dwfl-addr-sect
-/tests/dwfl-bug-addr-overflow
-/tests/dwfl-bug-fd-leak
-/tests/dwfl-bug-getmodules
-/tests/dwfl-bug-report
-/tests/dwfllines
-/tests/dwflmodtest
-/tests/dwfl-proc-attach
-/tests/dwfl-report-elf-align
-/tests/dwfl-report-segment-contiguous
-/tests/dwflsyms
-/tests/early-offscn
-/tests/ecp
-/tests/elfcopy
-/tests/elfgetchdr
-/tests/elfgetzdata
-/tests/elfputzdata
-/tests/elfrdwrnop
-/tests/elfshphehdr
-/tests/elfstrmerge
-/tests/elfstrtab
-/tests/emptyfile
-/tests/fillfile
-/tests/find-prologues
-/tests/funcretval
-/tests/funcscopes
-/tests/get-aranges
-/tests/get-files
-/tests/get-lines
-/tests/getphdrnum
-/tests/get-pubnames
-/tests/getsrc_die
-/tests/get-units-invalid
-/tests/get-units-split
-/tests/hash
-/tests/leb128
-/tests/line2addr
-/tests/low_high_pc
-/tests/msg_tst
-/tests/newdata
-/tests/newfile
-/tests/newscn
-/tests/next_cfi
-/tests/next-files
-/tests/next-lines
-/tests/peel_type
-/tests/rdwrmmap
-/tests/rerequest_tag
-/tests/saridx
-/tests/scnnames
-/tests/sectiondump
-/tests/show-abbrev
-/tests/show-die-info
-/tests/showptable
-/tests/strptr
-/tests/system-elf-libelf-test
-/tests/test-elf_cntl_gelf_getshdr
-/tests/test-flag-nobits
-/tests/test-nlist
-/tests/typeiter
-/tests/typeiter2
-/tests/unit-info
-/tests/update1
-/tests/update2
-/tests/update3
-/tests/update4
-/tests/varlocs
-/tests/vdsosyms
-/tests/vendorelf
-/tests/xlate_notes
-/tests/zstrptr
/version.h
diff --git a/ChangeLog b/ChangeLog
index 072a7853..cfdc5699 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,7 @@
+2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+
+ * .gitignore: Move subdirectory patterns to separate .gitignore files.
+
2020-12-15 Dmitry V. Levin <ldv@altlinux.org>
* configure.ac (USE_NLS, AM_PO_SUBDIRS): Remove.
diff --git a/backends/.gitignore b/backends/.gitignore
new file mode 100644
index 00000000..4c1bf5ad
--- /dev/null
+++ b/backends/.gitignore
@@ -0,0 +1 @@
+/*.map
diff --git a/backends/ChangeLog b/backends/ChangeLog
index f22cd57f..a821cd3b 100644
--- a/backends/ChangeLog
+++ b/backends/ChangeLog
@@ -1,3 +1,7 @@
+2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+
+ * .gitignore: New file.
+
2020-12-12 Dmitry V. Levin <ldv@altlinux.org>
* aarch64_retval.c (aarch64_return_value_location): Fix spelling typo
diff --git a/config/.gitignore b/config/.gitignore
new file mode 100644
index 00000000..86a4dad2
--- /dev/null
+++ b/config/.gitignore
@@ -0,0 +1,13 @@
+/ar-lib
+/compile
+/config.guess
+/config.rpath
+/config.sub
+/depcomp
+/install-sh
+/libdebuginfod.pc
+/libdw.pc
+/libelf.pc
+/missing
+/test-driver
+/ylwrap
diff --git a/config/ChangeLog b/config/ChangeLog
index f0305985..8527be52 100644
--- a/config/ChangeLog
+++ b/config/ChangeLog
@@ -1,3 +1,7 @@
+2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+
+ * .gitignore: New file.
+
2020-12-12 Dmitry V. Levin <ldv@altlinux.org>
* 10-default-yama-scope.conf: Fix spelling typo in comment.
diff --git a/debuginfod/.gitignore b/debuginfod/.gitignore
new file mode 100644
index 00000000..382fce63
--- /dev/null
+++ b/debuginfod/.gitignore
@@ -0,0 +1,2 @@
+/debuginfod
+/debuginfod-find
diff --git a/debuginfod/ChangeLog b/debuginfod/ChangeLog
index 379af287..03e773d1 100644
--- a/debuginfod/ChangeLog
+++ b/debuginfod/ChangeLog
@@ -1,3 +1,7 @@
+2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+
+ * .gitignore: New file.
+
2020-12-12 Dmitry V. Levin <ldv@altlinux.org>
* debuginfod-client.c (debuginfod_query_server): Fix spelling typos in
diff --git a/libcpu/.gitignore b/libcpu/.gitignore
new file mode 100644
index 00000000..9390e5b9
--- /dev/null
+++ b/libcpu/.gitignore
@@ -0,0 +1,5 @@
+/*.mnemonics
+/*_dis.h
+/*_gendis
+/*_lex.c
+/*_parse.[ch]
diff --git a/libcpu/ChangeLog b/libcpu/ChangeLog
index af7ea96c..5041dce7 100644
--- a/libcpu/ChangeLog
+++ b/libcpu/ChangeLog
@@ -1,3 +1,7 @@
+2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+
+ * .gitignore: New file.
+
2020-12-16 Érico Nogueira <ericonr@disroot.org>
* Makefile.am (i386_gendis_LDADD): Add obstack_LIBS.
diff --git a/libdw/.gitignore b/libdw/.gitignore
new file mode 100644
index 00000000..d5fe053f
--- /dev/null
+++ b/libdw/.gitignore
@@ -0,0 +1 @@
+/known-dwarf.h
diff --git a/libdw/ChangeLog b/libdw/ChangeLog
index 20fec602..f4245155 100644
--- a/libdw/ChangeLog
+++ b/libdw/ChangeLog
@@ -1,3 +1,7 @@
+2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+
+ * .gitignore: New file.
+
2020-12-16 Dmitry V. Levin <ldv@altlinux.org>
* libdwP.h (_): Remove.
diff --git a/src/.gitignore b/src/.gitignore
new file mode 100644
index 00000000..f7252a4a
--- /dev/null
+++ b/src/.gitignore
@@ -0,0 +1,17 @@
+/addr2line
+/ar
+/elfclassify
+/elfcmp
+/elfcompress
+/elflint
+/findtextrel
+/make-debug-archive
+/nm
+/objdump
+/ranlib
+/readelf
+/size
+/stack
+/strings
+/strip
+/unstrip
diff --git a/src/ChangeLog b/src/ChangeLog
index 2e428e0b..2a712071 100644
--- a/src/ChangeLog
+++ b/src/ChangeLog
@@ -1,3 +1,7 @@
+2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+
+ * .gitignore: New file.
+
2020-12-12 Mark Wielaard <mark@klomp.org>
* elflint.c (check_sections): Handle SHF_GNU_RETAIN.
diff --git a/tests/.gitignore b/tests/.gitignore
new file mode 100644
index 00000000..a9968335
--- /dev/null
+++ b/tests/.gitignore
@@ -0,0 +1,112 @@
+/*.log
+/*.trs
+/addrcfi
+/addrscopes
+/addsections
+/aggregate_size
+/all-dwarf-ranges
+/alldts
+/allfcts
+/allregs
+/arextract
+/arls
+/arsymtest
+/asm-tst1
+/asm-tst2
+/asm-tst3
+/asm-tst4
+/asm-tst5
+/asm-tst6
+/asm-tst7
+/asm-tst8
+/asm-tst9
+/attr-integrate-skel
+/backtrace
+/backtrace-child
+/backtrace-child-biarch
+/backtrace-data
+/backtrace-dwarf
+/buildid
+/debugaltlink
+/debuginfod_build_id_find
+/debuglink
+/deleted
+/dwarf-die-addr-die
+/dwarf-getmacros
+/dwarf-getstring
+/dwarf-ranges
+/dwarf_default_lower_bound
+/dwarfcfi
+/dwelf_elf_e_machine_string
+/dwelfgnucompressed
+/dwfl-addr-sect
+/dwfl-bug-addr-overflow
+/dwfl-bug-fd-leak
+/dwfl-bug-getmodules
+/dwfl-bug-report
+/dwfl-proc-attach
+/dwfl-report-elf-align
+/dwfl-report-segment-contiguous
+/dwfllines
+/dwflmodtest
+/dwflsyms
+/early-offscn
+/ecp
+/elfcopy
+/elfgetchdr
+/elfgetzdata
+/elfputzdata
+/elfrdwrnop
+/elfshphehdr
+/elfstrmerge
+/elfstrtab
+/emptyfile
+/fillfile
+/find-prologues
+/funcretval
+/funcscopes
+/get-aranges
+/get-files
+/get-lines
+/get-pubnames
+/get-units-invalid
+/get-units-split
+/getphdrnum
+/getsrc_die
+/hash
+/leb128
+/line2addr
+/low_high_pc
+/msg_tst
+/newdata
+/newfile
+/newscn
+/next-files
+/next-lines
+/next_cfi
+/peel_type
+/rdwrmmap
+/rerequest_tag
+/saridx
+/scnnames
+/sectiondump
+/show-abbrev
+/show-die-info
+/showptable
+/strptr
+/system-elf-libelf-test
+/test-elf_cntl_gelf_getshdr
+/test-flag-nobits
+/test-nlist
+/typeiter
+/typeiter2
+/unit-info
+/update1
+/update2
+/update3
+/update4
+/varlocs
+/vdsosyms
+/vendorelf
+/xlate_notes
+/zstrptr
diff --git a/tests/ChangeLog b/tests/ChangeLog
index b9edd249..c3cd5557 100644
--- a/tests/ChangeLog
+++ b/tests/ChangeLog
@@ -1,3 +1,7 @@
+2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+
+ * .gitignore: New file.
+
2020-12-12 Mark Wielaard <mark@klomp.org>
* testfile-retain.o.bz2: New test file.
--
ldv
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] Update .gitignore files
2020-12-16 13:44 ` Mark Wielaard
2020-12-20 12:11 ` [PATCH 1/2] Split " Dmitry V. Levin
@ 2020-12-20 12:11 ` Dmitry V. Levin
1 sibling, 0 replies; 12+ messages in thread
From: Dmitry V. Levin @ 2020-12-20 12:11 UTC (permalink / raw)
To: elfutils-devel
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
---
.gitignore | 2 ++
ChangeLog | 2 ++
config/.gitignore | 2 ++
config/ChangeLog | 2 ++
debuginfod/.gitignore | 1 +
debuginfod/ChangeLog | 2 ++
tests/.gitignore | 2 ++
tests/ChangeLog | 2 ++
8 files changed, 15 insertions(+)
diff --git a/.gitignore b/.gitignore
index 0055ddae..9bf350c1 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,5 +1,7 @@
*#
*.a
+*.gcda
+*.gcno
*.o
*.orig
*.os
diff --git a/ChangeLog b/ChangeLog
index cfdc5699..dcbb1093 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,7 @@
2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+ * .gitignore: Add *.gcda and *.gcno.
+
* .gitignore: Move subdirectory patterns to separate .gitignore files.
2020-12-15 Dmitry V. Levin <ldv@altlinux.org>
diff --git a/config/.gitignore b/config/.gitignore
index 86a4dad2..8cd8ccdb 100644
--- a/config/.gitignore
+++ b/config/.gitignore
@@ -9,5 +9,7 @@
/libdw.pc
/libelf.pc
/missing
+/profile.csh
+/profile.sh
/test-driver
/ylwrap
diff --git a/config/ChangeLog b/config/ChangeLog
index 8527be52..41d0c6fe 100644
--- a/config/ChangeLog
+++ b/config/ChangeLog
@@ -1,5 +1,7 @@
2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+ * .gitignore: Add /profile.csh and /profile.sh.
+
* .gitignore: New file.
2020-12-12 Dmitry V. Levin <ldv@altlinux.org>
diff --git a/debuginfod/.gitignore b/debuginfod/.gitignore
index 382fce63..e0ff6687 100644
--- a/debuginfod/.gitignore
+++ b/debuginfod/.gitignore
@@ -1,2 +1,3 @@
/debuginfod
/debuginfod-find
+/debuginfod.h
diff --git a/debuginfod/ChangeLog b/debuginfod/ChangeLog
index 03e773d1..7caa27d7 100644
--- a/debuginfod/ChangeLog
+++ b/debuginfod/ChangeLog
@@ -1,5 +1,7 @@
2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+ * .gitignore: Add /debuginfod.h.
+
* .gitignore: New file.
2020-12-12 Dmitry V. Levin <ldv@altlinux.org>
diff --git a/tests/.gitignore b/tests/.gitignore
index a9968335..d0e83da2 100644
--- a/tests/.gitignore
+++ b/tests/.gitignore
@@ -27,6 +27,7 @@
/backtrace-data
/backtrace-dwarf
/buildid
+/core-dump-backtrace.lock
/debugaltlink
/debuginfod_build_id_find
/debuglink
@@ -86,6 +87,7 @@
/next_cfi
/peel_type
/rdwrmmap
+/read_unaligned
/rerequest_tag
/saridx
/scnnames
diff --git a/tests/ChangeLog b/tests/ChangeLog
index c3cd5557..13679f43 100644
--- a/tests/ChangeLog
+++ b/tests/ChangeLog
@@ -1,5 +1,7 @@
2020-12-19 Dmitry V. Levin <ldv@altlinux.org>
+ * .gitignore: Add /core-dump-backtrace.lock and /read_unaligned.
+
* .gitignore: New file.
2020-12-12 Mark Wielaard <mark@klomp.org>
--
ldv
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] Split top level .gitignore file
2020-12-20 12:11 ` [PATCH 1/2] Split " Dmitry V. Levin
@ 2020-12-20 15:28 ` Mark Wielaard
2020-12-20 15:37 ` Dmitry V. Levin
0 siblings, 1 reply; 12+ messages in thread
From: Mark Wielaard @ 2020-12-20 15:28 UTC (permalink / raw)
To: Dmitry V. Levin; +Cc: elfutils-devel
Hi Dmitry,
On Sun, Dec 20, 2020 at 03:11:19PM +0300, Dmitry V. Levin wrote:
> Move subdirectory parts of the top level .gitignore into appropriate
> subdirectories. This would be consistent with ChangeLog files,
> currently one has to update the top level ChangeLog file when the top
> level .gitignore file is changed in a way that affects specific
> subdirectories only.
Both changes look good to me. The only thing I would double check is
the /*.map entry in backends/.gitignore. It obviously comes from the
top-level .gitignore. But I don't know why it was there in the first
place.
Thanks,
Mark
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] Split top level .gitignore file
2020-12-20 15:28 ` Mark Wielaard
@ 2020-12-20 15:37 ` Dmitry V. Levin
2020-12-20 15:59 ` Dmitry V. Levin
0 siblings, 1 reply; 12+ messages in thread
From: Dmitry V. Levin @ 2020-12-20 15:37 UTC (permalink / raw)
To: Mark Wielaard; +Cc: elfutils-devel
On Sun, Dec 20, 2020 at 04:28:30PM +0100, Mark Wielaard wrote:
> Hi Dmitry,
>
> On Sun, Dec 20, 2020 at 03:11:19PM +0300, Dmitry V. Levin wrote:
> > Move subdirectory parts of the top level .gitignore into appropriate
> > subdirectories. This would be consistent with ChangeLog files,
> > currently one has to update the top level ChangeLog file when the top
> > level .gitignore file is changed in a way that affects specific
> > subdirectories only.
>
> Both changes look good to me. The only thing I would double check is
> the /*.map entry in backends/.gitignore. It obviously comes from the
> top-level .gitignore. But I don't know why it was there in the first
> place.
There used to be libebl_*.map files, removed by commit
4f937e24dc7ad1820fc7c99a6dd6422657f14666.
I'll remove it from .gitignore in the second commit then.
--
ldv
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] Split top level .gitignore file
2020-12-20 15:37 ` Dmitry V. Levin
@ 2020-12-20 15:59 ` Dmitry V. Levin
2020-12-20 16:09 ` Mark Wielaard
0 siblings, 1 reply; 12+ messages in thread
From: Dmitry V. Levin @ 2020-12-20 15:59 UTC (permalink / raw)
To: Mark Wielaard; +Cc: elfutils-devel
On Sun, Dec 20, 2020 at 06:37:36PM +0300, Dmitry V. Levin wrote:
> On Sun, Dec 20, 2020 at 04:28:30PM +0100, Mark Wielaard wrote:
> > Hi Dmitry,
> >
> > On Sun, Dec 20, 2020 at 03:11:19PM +0300, Dmitry V. Levin wrote:
> > > Move subdirectory parts of the top level .gitignore into appropriate
> > > subdirectories. This would be consistent with ChangeLog files,
> > > currently one has to update the top level ChangeLog file when the top
> > > level .gitignore file is changed in a way that affects specific
> > > subdirectories only.
> >
> > Both changes look good to me. The only thing I would double check is
> > the /*.map entry in backends/.gitignore. It obviously comes from the
> > top-level .gitignore. But I don't know why it was there in the first
> > place.
>
> There used to be libebl_*.map files, removed by commit
> 4f937e24dc7ad1820fc7c99a6dd6422657f14666.
>
> I'll remove it from .gitignore in the second commit then.
Apparently, it's the only entry in backends/.gitignore, and it's really
not a good idea to have an empty backends/.gitignore file.
I could do it in the reverse order: the first commit would update
the top level .gitignore, and the second commit would split it.
--
ldv
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] Split top level .gitignore file
2020-12-20 15:59 ` Dmitry V. Levin
@ 2020-12-20 16:09 ` Mark Wielaard
0 siblings, 0 replies; 12+ messages in thread
From: Mark Wielaard @ 2020-12-20 16:09 UTC (permalink / raw)
To: Dmitry V. Levin; +Cc: elfutils-devel
Hi Dmitry,
On Sun, Dec 20, 2020 at 06:59:21PM +0300, Dmitry V. Levin wrote:
> On Sun, Dec 20, 2020 at 06:37:36PM +0300, Dmitry V. Levin wrote:
> > I'll remove it from .gitignore in the second commit then.
>
> Apparently, it's the only entry in backends/.gitignore, and it's really
> not a good idea to have an empty backends/.gitignore file.
>
> I could do it in the reverse order: the first commit would update
> the top level .gitignore, and the second commit would split it.
Feel free to do it in either order or even simply merge the commits. I
don't relly have a preference. You could also simply git rm the
backends/.gitignore in the second commit.
Cheers,
Mark
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-12-20 16:10 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-15 23:40 [PATCH] Modernize gettext infrastructure Dmitry V. Levin
2020-12-15 23:46 ` Q: splitting the top level .gitignore file Dmitry V. Levin
2020-12-16 13:44 ` Mark Wielaard
2020-12-20 12:11 ` [PATCH 1/2] Split " Dmitry V. Levin
2020-12-20 15:28 ` Mark Wielaard
2020-12-20 15:37 ` Dmitry V. Levin
2020-12-20 15:59 ` Dmitry V. Levin
2020-12-20 16:09 ` Mark Wielaard
2020-12-20 12:11 ` [PATCH 2/2] Update .gitignore files Dmitry V. Levin
2020-12-16 14:05 ` [PATCH] Modernize gettext infrastructure Mark Wielaard
2020-12-16 14:59 ` Dmitry V. Levin
2020-12-16 15:10 ` Mark Wielaard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).