[gcc(refs/vendors/riscv/heads/gcc-13-with-riscv-opts)] Remove unnecessary md pattern for TARGET_XTHEADCONDMOV

[gcc(refs/vendors/riscv/heads/gcc-13-with-riscv-opts)] Remove unnecessary md pattern for TARGET_XTHEADCONDMOV

[Jeff Law]

https://gcc.gnu.org/g:467e03b8116ccbff2f5e2bec5d1fa0bf1fe39b67

commit 467e03b8116ccbff2f5e2bec5d1fa0bf1fe39b67
Author: Die Li <lidie@eswincomputing.com>
Date:   Sat Jun 3 11:02:09 2023 -0600

    Remove unnecessary md pattern for TARGET_XTHEADCONDMOV
    
    There are 2 small changes in this patch, but they do not affect the result.
    
    1. Remove unnecessary md pattern for TARGET_XTHEADCONDMOV in thead.md. The operands[4]
    in "if_then_else" are always comparison operations, so the generated rtl does not match
    the pattern that is expected to be deleted.
    
    2. Change operands[4] from const0_rtx to operands[1] to maintain rtl consistency. Although
    when output assembly, only operands[4] CODE will affect the output result.
    
    Signed-off-by: Die Li <lidie@eswincomputing.com>
    
    gcc/ChangeLog:
    
            * config/riscv/thead.md (*th_cond_gpr_mov<GPR:mode><GPR2:mode>): Delete.

Diff:
---
 gcc/config/riscv/thead.md | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/gcc/config/riscv/thead.md b/gcc/config/riscv/thead.md
index 0623607d3dc..ea377872bde 100644
--- a/gcc/config/riscv/thead.md
+++ b/gcc/config/riscv/thead.md
@@ -120,25 +120,12 @@
   /* Invert the condition and take else-block.  */
   rtx_code code = GET_CODE (operands[4]);
   code = (code == EQ) ? NE : EQ;
-  operands[4] = gen_rtx_fmt_ee (code, VOIDmode, const0_rtx, const0_rtx);
+  operands[4] = gen_rtx_fmt_ee (code, VOIDmode, operands[1], const0_rtx);
   return "th.mv%C4z\t%0,%z3,%1";
 }
   [(set_attr "type" "condmove")
    (set_attr "mode" "<GPR:MODE>")])
 
-(define_insn "*th_cond_gpr_mov<GPR:mode><GPR2:mode>"
-  [(set (match_operand:GPR 0 "register_operand" "=r,r")
-	(if_then_else:GPR
-	 (match_operand:GPR2 1 "register_operand" "r,r")
-	 (match_operand:GPR 2 "reg_or_0_operand" "rJ,0")
-	 (match_operand:GPR 3 "reg_or_0_operand" "0,rJ")))]
-  "TARGET_XTHEADCONDMOV"
-  "@
-   th.mvnez\t%0,%z2,%1
-   th.mveqz\t%0,%z3,%1"
-  [(set_attr "type" "condmove")
-   (set_attr "mode" "<GPR:MODE>")])
-
 ;; XTheadFmv
 
 ;; In RV32, we lack fmv.x.d and fmv.d.x, but XTheadFmv has instructions

[gcc(refs/vendors/riscv/heads/gcc-13-with-riscv-opts)] Remove unnecessary md pattern for TARGET_XTHEADCONDMOV

[Jeff Law]

https://gcc.gnu.org/g:11ff95d33563974a211161950a492cee43d731d0

commit 11ff95d33563974a211161950a492cee43d731d0
Author: Die Li <lidie@eswincomputing.com>
Date:   Sat Jun 3 11:02:09 2023 -0600

    Remove unnecessary md pattern for TARGET_XTHEADCONDMOV
    
    There are 2 small changes in this patch, but they do not affect the result.
    
    1. Remove unnecessary md pattern for TARGET_XTHEADCONDMOV in thead.md. The operands[4]
    in "if_then_else" are always comparison operations, so the generated rtl does not match
    the pattern that is expected to be deleted.
    
    2. Change operands[4] from const0_rtx to operands[1] to maintain rtl consistency. Although
    when output assembly, only operands[4] CODE will affect the output result.
    
    Signed-off-by: Die Li <lidie@eswincomputing.com>
    
    gcc/ChangeLog:
    
            * config/riscv/thead.md (*th_cond_gpr_mov<GPR:mode><GPR2:mode>): Delete.

Diff:
---
 gcc/config/riscv/thead.md | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/gcc/config/riscv/thead.md b/gcc/config/riscv/thead.md
index 0623607d3dc..ea377872bde 100644
--- a/gcc/config/riscv/thead.md
+++ b/gcc/config/riscv/thead.md
@@ -120,25 +120,12 @@
   /* Invert the condition and take else-block.  */
   rtx_code code = GET_CODE (operands[4]);
   code = (code == EQ) ? NE : EQ;
-  operands[4] = gen_rtx_fmt_ee (code, VOIDmode, const0_rtx, const0_rtx);
+  operands[4] = gen_rtx_fmt_ee (code, VOIDmode, operands[1], const0_rtx);
   return "th.mv%C4z\t%0,%z3,%1";
 }
   [(set_attr "type" "condmove")
    (set_attr "mode" "<GPR:MODE>")])
 
-(define_insn "*th_cond_gpr_mov<GPR:mode><GPR2:mode>"
-  [(set (match_operand:GPR 0 "register_operand" "=r,r")
-	(if_then_else:GPR
-	 (match_operand:GPR2 1 "register_operand" "r,r")
-	 (match_operand:GPR 2 "reg_or_0_operand" "rJ,0")
-	 (match_operand:GPR 3 "reg_or_0_operand" "0,rJ")))]
-  "TARGET_XTHEADCONDMOV"
-  "@
-   th.mvnez\t%0,%z2,%1
-   th.mveqz\t%0,%z3,%1"
-  [(set_attr "type" "condmove")
-   (set_attr "mode" "<GPR:MODE>")])
-
 ;; XTheadFmv
 
 ;; In RV32, we lack fmv.x.d and fmv.d.x, but XTheadFmv has instructions