* FW: GCC.
@ 2000-03-14 5:20 Virgil Palanciuc
2000-04-01 0:00 ` Virgil Palanciuc
0 siblings, 1 reply; 4+ messages in thread
From: Virgil Palanciuc @ 2000-03-14 5:20 UTC (permalink / raw)
To: Gcc-Help@Gcc. Gnu. Org
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1456 bytes --]
Title:
   I am trying to build a cross-compiler for the
SC100 family. I have a directory (config/quartz) containing the following
files: Â Â Â Â Â Â Â
quartz.c       Â
quartz.h       Â
quartz.h.coff       Â
quartz.h.physical       Â
quartz.h.virtual       Â
quartz.md       Â
quartz.md.bak       Â
quartz.md.exp1 Â Â Â Â Â Â Â
quartz.md.exp2 Â Â Â Â Â Â Â
quartz.md.exp3 Â Â Â Â Â Â Â
quartz.md.exp4 Â Â Â Â Â Â Â
quartz.md.v49 Â Â IÂ know what
quartz.c , quartz.h , quartz.md are used for. I
suppose that quartz.md.bak is a backup file and that the other .md files are
simply different versions. I don't know what should I do with
quartz.h.coff ,  quartz.h.physical
and  quartz.h.virtual .
  I tryied to compile using configure
--target=quartz-local and I almost did it, but it doesn'n sound right.
I think I should use a different option for configure, but I can't figure
out which one.
    Something I should have said from the
very beginning : IÂ work on SunOS5.7, installed on a i386
machine.
    Please write me if you can help.
                    Â
Virgil.
Â
Â
^ permalink raw reply [flat|nested] 4+ messages in thread
* FW: GCC.
2000-03-14 5:20 FW: GCC Virgil Palanciuc
@ 2000-04-01 0:00 ` Virgil Palanciuc
0 siblings, 0 replies; 4+ messages in thread
From: Virgil Palanciuc @ 2000-04-01 0:00 UTC (permalink / raw)
To: Gcc-Help@Gcc. Gnu. Org
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1456 bytes --]
Title:
   I am trying to build a cross-compiler for the
SC100 family. I have a directory (config/quartz) containing the following
files: Â Â Â Â Â Â Â
quartz.c       Â
quartz.h       Â
quartz.h.coff       Â
quartz.h.physical       Â
quartz.h.virtual       Â
quartz.md       Â
quartz.md.bak       Â
quartz.md.exp1 Â Â Â Â Â Â Â
quartz.md.exp2 Â Â Â Â Â Â Â
quartz.md.exp3 Â Â Â Â Â Â Â
quartz.md.exp4 Â Â Â Â Â Â Â
quartz.md.v49 Â Â IÂ know what
quartz.c , quartz.h , quartz.md are used for. I
suppose that quartz.md.bak is a backup file and that the other .md files are
simply different versions. I don't know what should I do with
quartz.h.coff ,  quartz.h.physical
and  quartz.h.virtual .
  I tryied to compile using configure
--target=quartz-local and I almost did it, but it doesn'n sound right.
I think I should use a different option for configure, but I can't figure
out which one.
    Something I should have said from the
very beginning : IÂ work on SunOS5.7, installed on a i386
machine.
    Please write me if you can help.
                    Â
Virgil.
Â
Â
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: FW: gcc
2002-08-15 23:04 FW: gcc Samuel Lee Kwek Ming
@ 2002-08-16 0:26 ` Claudio Bley
0 siblings, 0 replies; 4+ messages in thread
From: Claudio Bley @ 2002-08-16 0:26 UTC (permalink / raw)
To: 'gcc-help@gcc.gnu.org.'
>>>>> "Samuel" == Samuel Lee Kwek Ming <lkmn@singtel.com> writes:
Samuel> Hi
Samuel> I got the error message shown below when performing the
Samuel> configure. I know the variable CC is set incorrectly but
Samuel> not sure what it should be set to.
Samuel> [ntms2ap]/PROD_pri/users/install # echo $CC
Samuel> /NTMS2_PROD/production/backup/install/gcc-3.1.1/gcc
"You must set the environment variable CC to a working compiler." Does
this file exist? Is it executable? What happens if you execute "$CC"
on the command line?
--
Claudio Bley _
ASCII ribbon campaign ( )
ICQ# 83197241 - against HTML email X
http://www.cs.uni-magdeburg.de/~bley/ & vCards / \
^ permalink raw reply [flat|nested] 4+ messages in thread
* FW: gcc
@ 2002-08-15 23:04 Samuel Lee Kwek Ming
2002-08-16 0:26 ` Claudio Bley
0 siblings, 1 reply; 4+ messages in thread
From: Samuel Lee Kwek Ming @ 2002-08-15 23:04 UTC (permalink / raw)
To: 'gcc-help@gcc.gnu.org.'; +Cc: Eddie Tan
Hi
I got the error message shown below when performing the configure. I know
the variable CC is set incorrectly but not sure what it should be set to.
Please assist. Thanks.
Regards
Sam
============================================================================
==================
[ntms2ap]/PROD_pri/users/install # echo $objdir
/PROD_pri/users/install
[ntms2ap]/PROD_pri/users/install # echo $srcdir
/NTMS2_PROD/production/backup/install/gcc-3.1.1
[ntms2ap]/PROD_pri/users/install # $srcdir/configure
Configuring for a powerpc-ibm-aix4.3.3.0 host.
*** This configuration is not supported in the following subdirectories:
target-libffi target-boehm-gc target-zlib target-libjava
(Any other directories should still work fine.)
Created "Makefile" in /PROD_pri/users/install using "mt-frag"
/NTMS2_PROD/production/backup/install/gcc-3.1.1/configure[1486]:
/NTMS2_PROD/pro
duction/backup/install/gcc-3.1.1/gcc: 0403-006 Execute permission denied.
*** The command '/NTMS2_PROD/production/backup/install/gcc-3.1.1/gcc -o
conftest
-g conftest.c' failed.
*** You must set the environment variable CC to a working compiler.
[ntms2ap]/PROD_pri/users/install # echo $CC
/NTMS2_PROD/production/backup/install/gcc-3.1.1/gcc
[ntms2ap]/PROD_pri/users/install # echo $PATH
/usr/Tivoli/bin/aix4-r1/bin:/usr/Tivoli/bin/aix4-r1/ADE:/usr/Tivoli/bin/aix4
-r1/
AEF:/usr/Tivoli/bin/aix4-r1/kerberos:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/b
in/X
11:/sbin:/usr/sbin/cluster:/usr/local/bin:/usr/local/sbin:/usr/local/gcc:/NT
MS2_
PROD/production/backup/install/gcc-3.1.1/gcc
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2002-08-16 7:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-03-14 5:20 FW: GCC Virgil Palanciuc
2000-04-01 0:00 ` Virgil Palanciuc
2002-08-15 23:04 FW: gcc Samuel Lee Kwek Ming
2002-08-16 0:26 ` Claudio Bley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).