* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory [not found] ` <CAH6eHdRfqegjidsvAka4RQHCWqPD1y0RBBrn4NHHT64fppJjmA@mail.gmail.com> @ 2023-11-29 23:53 ` Jonny Grant 2023-11-30 9:31 ` Jonathan Wakely 0 siblings, 1 reply; 12+ messages in thread From: Jonny Grant @ 2023-11-29 23:53 UTC (permalink / raw) To: Jonathan Wakely; +Cc: gcc-help On 29/11/2023 15:55, Jonathan Wakely wrote: > On Wed, 29 Nov 2023 at 14:44, Jonny Grant <jg@jguk.org> wrote: >> >> >> >> On 29/11/2023 13:05, Jonathan Wakely wrote: >>> On Wed, 29 Nov 2023 at 12:59, Jonny Grant <jg@jguk.org> wrote: >>>> >>>> Hello >>>> >>>> Has anyone encountered this when compiling gcc from source? libgomp doesn't build due to xgcc missing >>>> >>>> I got latest git, did >>>> ./configure --disable-multilib >>> >>> Don't build in the source directory: https://gcc.gnu.org/wiki/FAQ#configure >>> >>>> make html >>> >>> Try make all-gcc before make html. >> >> >> Sure. >> >> It gets stuck on genmodes.cc >> >> >> >> ../gcc_doc/configure --prefix=/home/jonny/code/repos/gcc_tests/gcc_install --disable-multilib > > This belongs on the gcc-help list, not here. > > Are you sure you ran configure in an empty dir, not one you'd already > fouled up with previous configurations or previous 'make html' > commands? May I ask if "make distclean" clean up the 24 files that are left as untracked files? "git status" shows them. Anyway, as you have suggested, I'll always run on a separate build dir. My build dir worked after I removed these 3: gcc/collect-ld gcc/bconfig.h gcc/auto-host.h The full 24 I local files I removed. Sharing for completeness. gcc/Make-hooks gcc/ada/Makefile gcc/ada/gcc-interface/Makefile gcc/as gcc/auto-host.h gcc/bconfig.h gcc/collect-ld gcc/config.h gcc/configargs.h gcc/cs-bconfig.h gcc/cs-config.h gcc/cs-tm.h gcc/cs-tm_p.h gcc/cstamp-h gcc/dsymutil gcc/gcc-driver-name.h gcc/gcc-vers.texi gcc/m2/Make-maintainer gcc/m2/config-make gcc/nm gcc/option-includes.mk gcc/plugin-version.h gcc/tm.h gcc/tm_p.h > You should start in a completely empty directory. And I assume > ../gcc_doc is not the same directory as . Yes, have gcc_build directory too. I'd expected "make distclean" to have been enough. But I'll always build from a separate directory now. Kind regards Jonny ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-11-29 23:53 ` host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory Jonny Grant @ 2023-11-30 9:31 ` Jonathan Wakely 2023-12-04 0:34 ` Jonny Grant 0 siblings, 1 reply; 12+ messages in thread From: Jonathan Wakely @ 2023-11-30 9:31 UTC (permalink / raw) To: Jonny Grant; +Cc: gcc-help [-- Attachment #1: Type: text/plain, Size: 2413 bytes --] On Wed, 29 Nov 2023, 23:53 Jonny Grant, <jg@jguk.org> wrote: > > > On 29/11/2023 15:55, Jonathan Wakely wrote: > > On Wed, 29 Nov 2023 at 14:44, Jonny Grant <jg@jguk.org> wrote: > >> > >> > >> > >> On 29/11/2023 13:05, Jonathan Wakely wrote: > >>> On Wed, 29 Nov 2023 at 12:59, Jonny Grant <jg@jguk.org> wrote: > >>>> > >>>> Hello > >>>> > >>>> Has anyone encountered this when compiling gcc from source? libgomp > doesn't build due to xgcc missing > >>>> > >>>> I got latest git, did > >>>> ./configure --disable-multilib > >>> > >>> Don't build in the source directory: > https://gcc.gnu.org/wiki/FAQ#configure > >>> > >>>> make html > >>> > >>> Try make all-gcc before make html. > >> > >> > >> Sure. > >> > >> It gets stuck on genmodes.cc > >> > >> > >> > >> ../gcc_doc/configure > --prefix=/home/jonny/code/repos/gcc_tests/gcc_install --disable-multilib > > > > This belongs on the gcc-help list, not here. > > > > Are you sure you ran configure in an empty dir, not one you'd already > > fouled up with previous configurations or previous 'make html' > > commands? > > May I ask if "make distclean" clean up the 24 files that are left as > untracked files? "git status" shows them. Anyway, as you have suggested, > I'll always run on a separate build dir. > > My build dir worked after I removed these 3: > > gcc/collect-ld > gcc/bconfig.h > gcc/auto-host.h > > > The full 24 I local files I removed. Sharing for completeness. > gcc/Make-hooks > gcc/ada/Makefile > gcc/ada/gcc-interface/Makefile > gcc/as > gcc/auto-host.h > gcc/bconfig.h > gcc/collect-ld > gcc/config.h > gcc/configargs.h > gcc/cs-bconfig.h > gcc/cs-config.h > gcc/cs-tm.h > gcc/cs-tm_p.h > gcc/cstamp-h > gcc/dsymutil > gcc/gcc-driver-name.h > gcc/gcc-vers.texi > gcc/m2/Make-maintainer > gcc/m2/config-make > gcc/nm > gcc/option-includes.mk > gcc/plugin-version.h > gcc/tm.h > gcc/tm_p.h > > > > You should start in a completely empty directory. And I assume > > ../gcc_doc is not the same directory as . > > Yes, have gcc_build directory too. I'd expected "make distclean" to have > been enough. But I'll always build from a separate directory now. > Just remove the whole directory and start again in a clean one. I'll add that to the FAQ. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-11-30 9:31 ` Jonathan Wakely @ 2023-12-04 0:34 ` Jonny Grant 2023-12-04 4:38 ` Xi Ruoyao 0 siblings, 1 reply; 12+ messages in thread From: Jonny Grant @ 2023-12-04 0:34 UTC (permalink / raw) To: Jonathan Wakely; +Cc: gcc-help On 30/11/2023 09:31, Jonathan Wakely wrote: > > > On Wed, 29 Nov 2023, 23:53 Jonny Grant, <jg@jguk.org <mailto:jg@jguk.org>> wrote: > > > > On 29/11/2023 15:55, Jonathan Wakely wrote: > > On Wed, 29 Nov 2023 at 14:44, Jonny Grant <jg@jguk.org <mailto:jg@jguk.org>> wrote: > >> > >> > >> > >> On 29/11/2023 13:05, Jonathan Wakely wrote: > >>> On Wed, 29 Nov 2023 at 12:59, Jonny Grant <jg@jguk.org <mailto:jg@jguk.org>> wrote: > >>>> > >>>> Hello > >>>> > >>>> Has anyone encountered this when compiling gcc from source? libgomp doesn't build due to xgcc missing > >>>> > >>>> I got latest git, did > >>>> ./configure --disable-multilib > >>> > >>> Don't build in the source directory: https://gcc.gnu.org/wiki/FAQ#configure <https://gcc.gnu.org/wiki/FAQ#configure> > >>> > >>>> make html > >>> > >>> Try make all-gcc before make html. > >> > >> > >> Sure. > >> > >> It gets stuck on genmodes.cc > >> > >> > >> > >> ../gcc_doc/configure --prefix=/home/jonny/code/repos/gcc_tests/gcc_install --disable-multilib > > > > This belongs on the gcc-help list, not here. > > > > Are you sure you ran configure in an empty dir, not one you'd already > > fouled up with previous configurations or previous 'make html' > > commands? > > May I ask if "make distclean" clean up the 24 files that are left as untracked files? "git status" shows them. Anyway, as you have suggested, I'll always run on a separate build dir. > > My build dir worked after I removed these 3: > > gcc/collect-ld > gcc/bconfig.h > gcc/auto-host.h > > > The full 24 I local files I removed. Sharing for completeness. > gcc/Make-hooks > gcc/ada/Makefile > gcc/ada/gcc-interface/Makefile > gcc/as > gcc/auto-host.h > gcc/bconfig.h > gcc/collect-ld > gcc/config.h > gcc/configargs.h > gcc/cs-bconfig.h > gcc/cs-config.h > gcc/cs-tm.h > gcc/cs-tm_p.h > gcc/cstamp-h > gcc/dsymutil > gcc/gcc-driver-name.h > gcc/gcc-vers.texi > gcc/m2/Make-maintainer > gcc/m2/config-make > gcc/nm > gcc/option-includes.mk <http://option-includes.mk> > gcc/plugin-version.h > gcc/tm.h > gcc/tm_p.h > > > > You should start in a completely empty directory. And I assume > > ../gcc_doc is not the same directory as . > > Yes, have gcc_build directory too. I'd expected "make distclean" to have been enough. But I'll always build from a separate directory now. > > > Just remove the whole directory and start again in a clean one. Fair enough, I did that, it works now. > I'll add that to the FAQ. Is it this page? https://gcc.gnu.org/install/configure.html How about changing this line to clarify make just say building within the src tree does not work, and is unsupported? Change from: "First, we highly recommend that GCC be built into a separate directory" To: "First, we only support building GCC from a separate directory" Kind regards, Jonny ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-12-04 0:34 ` Jonny Grant @ 2023-12-04 4:38 ` Xi Ruoyao 2023-12-04 10:44 ` Jonathan Wakely 0 siblings, 1 reply; 12+ messages in thread From: Xi Ruoyao @ 2023-12-04 4:38 UTC (permalink / raw) To: Jonny Grant, Jonathan Wakely; +Cc: gcc-help On Mon, 2023-12-04 at 00:34 +0000, Jonny Grant wrote: > Is it this page? > > https://gcc.gnu.org/install/configure.html > > How about changing this line to clarify make just say building within the src tree does not work, and is unsupported? > > Change from: > "First, we highly recommend that GCC be built into a separate directory" > > To: > "First, we only support building GCC from a separate directory" This paragraph has been updated to: First, we highly recommend that GCC be built into a separate directory from the sources which does not reside within the source tree. This is how we generally build GCC; building where objdir is a subdirectory of srcdir should work as well; building where objdir == srcdir is unsupported. Richard told me using a new subdirectory in srcdir as objdir works fine and *is* supported (i. e. if it somehow stops to work we'll fix). But objdir == srcdir has been broken for a long time and there is no intention to make it "work". The FAQ is a different page: https://gcc.gnu.org/wiki/FAQ#configure -- Xi Ruoyao <xry111@xry111.site> School of Aerospace Science and Technology, Xidian University ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-12-04 4:38 ` Xi Ruoyao @ 2023-12-04 10:44 ` Jonathan Wakely 2023-12-04 23:22 ` Jonny Grant 0 siblings, 1 reply; 12+ messages in thread From: Jonathan Wakely @ 2023-12-04 10:44 UTC (permalink / raw) To: Xi Ruoyao; +Cc: Jonny Grant, gcc-help [-- Attachment #1: Type: text/plain, Size: 1202 bytes --] On Mon, 4 Dec 2023, 04:38 Xi Ruoyao, <xry111@xry111.site> wrote: > On Mon, 2023-12-04 at 00:34 +0000, Jonny Grant wrote: > > Is it this page? > > > > https://gcc.gnu.org/install/configure.html > > > > How about changing this line to clarify make just say building within > the src tree does not work, and is unsupported? > > > > Change from: > > "First, we highly recommend that GCC be built into a separate directory" > > > > To: > > "First, we only support building GCC from a separate directory" > > This paragraph has been updated to: > > First, we highly recommend that GCC be built into a separate directory > from the sources which does not reside within the source tree. This is > how we generally build GCC; building where objdir is a subdirectory of > srcdir should work as well; building where objdir == srcdir is > unsupported. > > Richard told me using a new subdirectory in srcdir as objdir works fine > and *is* supported (i. e. if it somehow stops to work we'll fix). But > objdir == srcdir has been broken for a long time and there is no > intention to make it "work". > > The FAQ is a different page: https://gcc.gnu.org/wiki/FAQ#configure i.e. the link I sent in my first reply. ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-12-04 10:44 ` Jonathan Wakely @ 2023-12-04 23:22 ` Jonny Grant 2023-12-05 4:04 ` Xi Ruoyao 0 siblings, 1 reply; 12+ messages in thread From: Jonny Grant @ 2023-12-04 23:22 UTC (permalink / raw) To: Jonathan Wakely, Xi Ruoyao; +Cc: gcc-help On 04/12/2023 10:44, Jonathan Wakely wrote: > > > On Mon, 4 Dec 2023, 04:38 Xi Ruoyao, <xry111@xry111.site> wrote: > > On Mon, 2023-12-04 at 00:34 +0000, Jonny Grant wrote: > > Is it this page? > > > > https://gcc.gnu.org/install/configure.html <https://gcc.gnu.org/install/configure.html> > > > > How about changing this line to clarify make just say building within the src tree does not work, and is unsupported? > > > > Change from: > > "First, we highly recommend that GCC be built into a separate directory" > > > > To: > > "First, we only support building GCC from a separate directory" > > This paragraph has been updated to: > > First, we highly recommend that GCC be built into a separate directory > from the sources which does not reside within the source tree. This is > how we generally build GCC; building where objdir is a subdirectory of > srcdir should work as well; building where objdir == srcdir is > unsupported. > > Richard told me using a new subdirectory in srcdir as objdir works fine > and *is* supported (i. e. if it somehow stops to work we'll fix). But > objdir == srcdir has been broken for a long time and there is no > intention to make it "work". > > The FAQ is a different page: https://gcc.gnu.org/wiki/FAQ#configure <https://gcc.gnu.org/wiki/FAQ#configure> > > > i.e. the link I sent in my first reply. > Thank you and Xi for the link again. I signed up for a wiki account, but I can't see an "edit" button - is there a step I need to follow? Wanted to make a spelling correction on that page "hellgrind". I saw a spelling mistake on another page too. Kind regards, Jonny ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-12-04 23:22 ` Jonny Grant @ 2023-12-05 4:04 ` Xi Ruoyao 2023-12-05 14:44 ` Jonny Grant 0 siblings, 1 reply; 12+ messages in thread From: Xi Ruoyao @ 2023-12-05 4:04 UTC (permalink / raw) To: Jonny Grant, Jonathan Wakely; +Cc: gcc-help On Mon, 2023-12-04 at 23:22 +0000, Jonny Grant wrote: /* snip */ > > > Thank you and Xi for the link again. > > > I signed up for a wiki account, but I can't see an "edit" button - is > there a step I need to follow? Wanted to make a spelling correction on > that page "hellgrind". https://gcc.gnu.org/wiki/EditorGroup -- Xi Ruoyao <xry111@xry111.site> School of Aerospace Science and Technology, Xidian University ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-12-05 4:04 ` Xi Ruoyao @ 2023-12-05 14:44 ` Jonny Grant 2023-12-05 14:49 ` Jonathan Wakely 0 siblings, 1 reply; 12+ messages in thread From: Jonny Grant @ 2023-12-05 14:44 UTC (permalink / raw) To: Xi Ruoyao, Jonathan Wakely; +Cc: gcc-help On 05/12/2023 04:04, Xi Ruoyao wrote: > On Mon, 2023-12-04 at 23:22 +0000, Jonny Grant wrote: > > /* snip */ > >> >> >> Thank you and Xi for the link again. >> >> >> I signed up for a wiki account, but I can't see an "edit" button - is >> there a step I need to follow? Wanted to make a spelling correction on >> that page "hellgrind". > > https://gcc.gnu.org/wiki/EditorGroup I see, my username is JonnyGrant, I'm not on the list. Could you change "hellgrind" -> "helgrind" ? https://gcc.gnu.org/wiki/FAQ The other change was "feed-back" -> "feedback" https://gcc.gnu.org/wiki/Community With kind regards Jonny ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-12-05 14:44 ` Jonny Grant @ 2023-12-05 14:49 ` Jonathan Wakely 2023-12-06 21:48 ` Jonny Grant 0 siblings, 1 reply; 12+ messages in thread From: Jonathan Wakely @ 2023-12-05 14:49 UTC (permalink / raw) To: Jonny Grant; +Cc: Xi Ruoyao, gcc-help On Tue, 5 Dec 2023 at 14:44, Jonny Grant <jg@jguk.org> wrote: > > > > On 05/12/2023 04:04, Xi Ruoyao wrote: > > On Mon, 2023-12-04 at 23:22 +0000, Jonny Grant wrote: > > > > /* snip */ > > > >> > >> > >> Thank you and Xi for the link again. > >> > >> > >> I signed up for a wiki account, but I can't see an "edit" button - is > >> there a step I need to follow? Wanted to make a spelling correction on > >> that page "hellgrind". > > > > https://gcc.gnu.org/wiki/EditorGroup > > I see, my username is JonnyGrant, I'm not on the list. > > Could you change "hellgrind" -> "helgrind" ? > https://gcc.gnu.org/wiki/FAQ > > The other change was "feed-back" -> "feedback" > https://gcc.gnu.org/wiki/Community Both fixed, thanks! ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-12-05 14:49 ` Jonathan Wakely @ 2023-12-06 21:48 ` Jonny Grant 2023-12-07 0:17 ` Jonathan Wakely 0 siblings, 1 reply; 12+ messages in thread From: Jonny Grant @ 2023-12-06 21:48 UTC (permalink / raw) To: Jonathan Wakely; +Cc: Xi Ruoyao, gcc-help On 05/12/2023 14:49, Jonathan Wakely wrote: > On Tue, 5 Dec 2023 at 14:44, Jonny Grant <jg@jguk.org> wrote: >> >> >> >> On 05/12/2023 04:04, Xi Ruoyao wrote: >>> On Mon, 2023-12-04 at 23:22 +0000, Jonny Grant wrote: >>> >>> /* snip */ >>> >>>> >>>> >>>> Thank you and Xi for the link again. >>>> >>>> >>>> I signed up for a wiki account, but I can't see an "edit" button - is >>>> there a step I need to follow? Wanted to make a spelling correction on >>>> that page "hellgrind". >>> >>> https://gcc.gnu.org/wiki/EditorGroup >> >> I see, my username is JonnyGrant, I'm not on the list. >> >> Could you change "hellgrind" -> "helgrind" ? >> https://gcc.gnu.org/wiki/FAQ >> >> The other change was "feed-back" -> "feedback" >> https://gcc.gnu.org/wiki/Community > > > Both fixed, thanks! Great! https://gcc.gnu.org/wiki/FAQ#configure Current: "Then make a peer gcc-build directory next to the GCC source code directory. This should be an empty directory before you start." I suggest changing "peer" -> "separate" and "next to" -> "outside" ie: "Then make a separate gcc-build directory outside to the GCC source code directory. This should be an empty directory before you start." I was thinking of submitting a patch to add a link to https://gcc.gnu.org/wiki/FAQ to https://gcc.gnu.org/install/configure.html Cheers, Jonny ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-12-06 21:48 ` Jonny Grant @ 2023-12-07 0:17 ` Jonathan Wakely 2023-12-07 9:47 ` Jonny Grant 0 siblings, 1 reply; 12+ messages in thread From: Jonathan Wakely @ 2023-12-07 0:17 UTC (permalink / raw) To: Jonny Grant; +Cc: Xi Ruoyao, gcc-help [-- Attachment #1: Type: text/plain, Size: 1663 bytes --] On Wed, 6 Dec 2023, 21:49 Jonny Grant, <jg@jguk.org> wrote: > > > On 05/12/2023 14:49, Jonathan Wakely wrote: > > On Tue, 5 Dec 2023 at 14:44, Jonny Grant <jg@jguk.org> wrote: > >> > >> > >> > >> On 05/12/2023 04:04, Xi Ruoyao wrote: > >>> On Mon, 2023-12-04 at 23:22 +0000, Jonny Grant wrote: > >>> > >>> /* snip */ > >>> > >>>> > >>>> > >>>> Thank you and Xi for the link again. > >>>> > >>>> > >>>> I signed up for a wiki account, but I can't see an "edit" button - is > >>>> there a step I need to follow? Wanted to make a spelling correction on > >>>> that page "hellgrind". > >>> > >>> https://gcc.gnu.org/wiki/EditorGroup > >> > >> I see, my username is JonnyGrant, I'm not on the list. > >> > >> Could you change "hellgrind" -> "helgrind" ? > >> https://gcc.gnu.org/wiki/FAQ > >> > >> The other change was "feed-back" -> "feedback" > >> https://gcc.gnu.org/wiki/Community > > > > > > Both fixed, thanks! > > Great! > > https://gcc.gnu.org/wiki/FAQ#configure > > Current: > "Then make a peer gcc-build directory next to the GCC source code > directory. This should be an empty directory before you start." > > I suggest changing "peer" -> "separate" and "next to" -> "outside" > > ie: > "Then make a separate gcc-build directory outside to the GCC source code > directory. It doesn't actually need to be outside the source directory. It can't be a parent of the source directory though. This should be an empty directory before you start." > > I was thinking of submitting a patch to add a link to > https://gcc.gnu.org/wiki/FAQ > to https://gcc.gnu.org/install/configure.html I don't think the official/formal manual links to the informal wiki. > ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory 2023-12-07 0:17 ` Jonathan Wakely @ 2023-12-07 9:47 ` Jonny Grant 0 siblings, 0 replies; 12+ messages in thread From: Jonny Grant @ 2023-12-07 9:47 UTC (permalink / raw) To: Jonathan Wakely; +Cc: Xi Ruoyao, gcc-help On 07/12/2023 00:17, Jonathan Wakely wrote: > > > On Wed, 6 Dec 2023, 21:49 Jonny Grant, <jg@jguk.org <mailto:jg@jguk.org>> wrote: > > > > On 05/12/2023 14:49, Jonathan Wakely wrote: > > On Tue, 5 Dec 2023 at 14:44, Jonny Grant <jg@jguk.org <mailto:jg@jguk.org>> wrote: > >> > >> > >> > >> On 05/12/2023 04:04, Xi Ruoyao wrote: > >>> On Mon, 2023-12-04 at 23:22 +0000, Jonny Grant wrote: > >>> > >>> /* snip */ > >>> > >>>> > >>>> > >>>> Thank you and Xi for the link again. > >>>> > >>>> > >>>> I signed up for a wiki account, but I can't see an "edit" button - is > >>>> there a step I need to follow? Wanted to make a spelling correction on > >>>> that page "hellgrind". > >>> > >>> https://gcc.gnu.org/wiki/EditorGroup <https://gcc.gnu.org/wiki/EditorGroup> > >> > >> I see, my username is JonnyGrant, I'm not on the list. > >> > >> Could you change "hellgrind" -> "helgrind" ? > >> https://gcc.gnu.org/wiki/FAQ <https://gcc.gnu.org/wiki/FAQ> > >> > >> The other change was "feed-back" -> "feedback" > >> https://gcc.gnu.org/wiki/Community <https://gcc.gnu.org/wiki/Community> > > > > > > Both fixed, thanks! > > Great! > > https://gcc.gnu.org/wiki/FAQ#configure <https://gcc.gnu.org/wiki/FAQ#configure> > > Current: > "Then make a peer gcc-build directory next to the GCC source code directory. This should be an empty directory before you start." > > I suggest changing "peer" -> "separate" and "next to" -> "outside" > > ie: > "Then make a separate gcc-build directory outside to the GCC source code directory. > > > It doesn't actually need to be outside the source directory. It can't be a parent of the source directory though. Fair enough, so I just suggest removing the word "peer". I'll leave it with you. Kind regards Jonny ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2023-12-07 9:47 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <9eed991c-7def-440a-bb3b-96ea4f26a19e@jguk.org>
[not found] ` <CAH6eHdQNRRQH09J_x+vUBF1WUXGEaVkBy+_gC8BWXZ3EkhKxFg@mail.gmail.com>
[not found] ` <8b1d2871-b1e1-4f6a-985a-a66d1b2fe40e@jguk.org>
[not found] ` <CAH6eHdRfqegjidsvAka4RQHCWqPD1y0RBBrn4NHHT64fppJjmA@mail.gmail.com>
2023-11-29 23:53 ` host-x86_64-pc-linux-gnu/gcc/xgcc: No such file or directory Jonny Grant
2023-11-30 9:31 ` Jonathan Wakely
2023-12-04 0:34 ` Jonny Grant
2023-12-04 4:38 ` Xi Ruoyao
2023-12-04 10:44 ` Jonathan Wakely
2023-12-04 23:22 ` Jonny Grant
2023-12-05 4:04 ` Xi Ruoyao
2023-12-05 14:44 ` Jonny Grant
2023-12-05 14:49 ` Jonathan Wakely
2023-12-06 21:48 ` Jonny Grant
2023-12-07 0:17 ` Jonathan Wakely
2023-12-07 9:47 ` Jonny Grant
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).