* [PATCH 0/6] PowerPC Future patches
@ 2023-10-18 23:55 Michael Meissner
2023-10-18 23:58 ` [PATCH 1/6] PowerPC: Add -mcpu=future option Michael Meissner
` (5 more replies)
0 siblings, 6 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-18 23:55 UTC (permalink / raw)
To: gcc-patches, Michael Meissner, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
This patch is very preliminary support for a potential new feature to the
PowerPC that extends the current power10 MMA architecture. This feature may or
may not be present in any specific future PowerPC processor.
In the current MMA subsystem for Power10, there are 8 512-bit accumulator
registers. These accumulators are each tied to sets of 4 FPR registers. When
you issue a prime instruction, it makes sure the accumulator is a copy of the 4
FPR registers the accumulator is tied to. When you issue a deprime
instruction, it makes sure that the accumulator data content is logically
copied to the matching FPR register.
In the potential dense math system, the accumulators are moved to separate
registers called dense math registers (DM registers or DMR). The DMRs are then
extended to 1,024 bits and new instructions will be added to deal with all
1,024 bits of the DMRs.
If you take existing MMA code, it will work as long as you don't do anything
with accumulators, and you follow the rules in the ISA 3.1 documentation for
using the MMA subsystem.
These patches add support for the 512-bit accumulators within the dense math
system, and for allocation of the 1,024-bit DMRs. At this time, no additional
built-in functions will be done to support any dense math features other than
doing data movement between the DMRs and the VSX registers. Before we can look
at adding any new dense math support other than data movement, we need the GCC
compiler to be able to allocate and use these DMRs.
There are 6 patches in this patch set:
1) The first patch just adds -mcpu=future as an option to add new support.
This is similar to the -mcpu=future that we did before power10 was announced.
2) The second patch enables GCC to use the load and store vector pair
instructions to optimize memory copy operations in the compiler. For power10,
we needed to just stay with normal vector load/stores for memory copy
operations.
3) The third patch enables 512-bit accumulators that are located within in DMRs
instead of the FPRs. This patch enables the register allocation, but it does
not move the existing MMA to use these registers.
4) The fourth patch switches the MMA subsystem to use 512-bit accumulators
within DMRs if you use -mcpu=future.
5) The fifth patch switches the names of the MMA instructions to use the dense
math equivalent name if -mcpu=future.
6) The sixth patch enables using the full 1,024-bit DMRs. Right now, all you
can do with DMRs is move a VSX register to a DMR register, and to move a DMR
register to a VSX register.
In terms of changes, these patch now use the wD constraint for accumulators.
If you compile with -mcpu=power10, the wD constraint will match the equivalent
FPR register that overlaps with the accumulator. If you compile with
-mcpu=future, the wD constraint will match the DMR register and not the FPR
register.
These patches also modifies the print_operand %A output modifier to print out
DMR register numbers if -mcpu=future, and continue to print out the FPR
register number divided by 4 for -mcpu=power10.
In general, if you only use the built-in functions, things work between the two
systems. If you use extended asm, you will likely need to modify the code.
Going forward, hopefully if you modify your code to use the wD constraint and
%A output modifier, you can write code that switches more easily between the
two systems.
Again, these are preliminary patches for a potential future machine. Things
will likely change in terms of implementation and usage over time.
Originally these patches were submitted in November 2022:
https://gcc.gnu.org/pipermail/gcc-patches/2022-November/605581.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH 1/6] PowerPC: Add -mcpu=future option
2023-10-18 23:55 [PATCH 0/6] PowerPC Future patches Michael Meissner
@ 2023-10-18 23:58 ` Michael Meissner
2023-10-25 20:15 ` Ping: " Michael Meissner
2023-11-03 7:49 ` Ping #2: " Michael Meissner
2023-10-19 0:00 ` [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair Michael Meissner
` (4 subsequent siblings)
5 siblings, 2 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-18 23:58 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
This patch implements support for a potential future PowerPC cpu. Features
added with -mcpu=future, may or may not be added to new PowerPC processors.
This patch adds support for the -mcpu=future option. If you use -mcpu=future,
the macro __ARCH_PWR_FUTURE__ is defined, and the assembler .machine directive
"future" is used. Future patches in this series will add support for new
instructions that may be present in future PowerPC processors.
This particular patch does not any new features. It exists as a ground work
for future patches to support for a possible PowerPC processor in the future.
This patch does not implement any differences in tuning when -mcpu=future is
used compared to -mcpu=power10. If -mcpu=future is used, GCC will use power10
tuning. If you explicitly use -mtune=future, you will get a warning that
-mtune=future is not supported, and default tuning will be set for power10.
The patches have been tested on both little and big endian systems. Can I check
it into the master branch?
2023-10-18 Michael Meissner <meissner@linux.ibm.com>
gcc/
* config/rs6000/rs6000-c.cc (rs6000_target_modify_macros): Define
__ARCH_PWR_FUTURE__ if -mcpu=future.
* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS): New macro.
(POWERPC_MASKS): Add -mcpu=future support.
* config/rs6000/rs6000-opts.h (enum processor_type): Add
PROCESSOR_FUTURE.
* config/rs6000/rs6000-tables.opt: Regenerate.
* config/rs6000/rs6000.cc (rs600_cpu_index_lookup): New helper
function.
(rs6000_option_override_internal): Make -mcpu=future set
-mtune=power10. If the user explicitly uses -mtune=future, give a
warning and reset the tuning to power10.
(rs6000_option_override_internal): Use power10 costs for future
machine.
(rs6000_machine_from_flags): Add support for -mcpu=future.
(rs6000_opt_masks): Likewise.
* config/rs6000/rs6000.h (ASM_CPU_SUPPORT): Likewise.
* config/rs6000/rs6000.md (cpu attribute): Likewise.
* config/rs6000/rs6000.opt (-mfuture): New undocumented debug switch.
* doc/invoke.texi (IBM RS/6000 and PowerPC Options): Document -mcpu=future.
---
gcc/config/rs6000/rs6000-c.cc | 2 +
gcc/config/rs6000/rs6000-cpus.def | 6 +++
gcc/config/rs6000/rs6000-opts.h | 4 +-
gcc/config/rs6000/rs6000-tables.opt | 3 ++
gcc/config/rs6000/rs6000.cc | 58 ++++++++++++++++++++++++-----
gcc/config/rs6000/rs6000.h | 1 +
gcc/config/rs6000/rs6000.md | 2 +-
gcc/config/rs6000/rs6000.opt | 4 ++
gcc/doc/invoke.texi | 2 +-
9 files changed, 69 insertions(+), 13 deletions(-)
diff --git a/gcc/config/rs6000/rs6000-c.cc b/gcc/config/rs6000/rs6000-c.cc
index 65be0ac43e2..e276c20cccd 100644
--- a/gcc/config/rs6000/rs6000-c.cc
+++ b/gcc/config/rs6000/rs6000-c.cc
@@ -447,6 +447,8 @@ rs6000_target_modify_macros (bool define_p, HOST_WIDE_INT flags)
rs6000_define_or_undefine_macro (define_p, "_ARCH_PWR9");
if ((flags & OPTION_MASK_POWER10) != 0)
rs6000_define_or_undefine_macro (define_p, "_ARCH_PWR10");
+ if ((flags & OPTION_MASK_FUTURE) != 0)
+ rs6000_define_or_undefine_macro (define_p, "_ARCH_PWR_FUTURE");
if ((flags & OPTION_MASK_SOFT_FLOAT) != 0)
rs6000_define_or_undefine_macro (define_p, "_SOFT_FLOAT");
if ((flags & OPTION_MASK_RECIP_PRECISION) != 0)
diff --git a/gcc/config/rs6000/rs6000-cpus.def b/gcc/config/rs6000/rs6000-cpus.def
index 8c530a22da8..a6d9d7bf9a8 100644
--- a/gcc/config/rs6000/rs6000-cpus.def
+++ b/gcc/config/rs6000/rs6000-cpus.def
@@ -88,6 +88,10 @@
| OPTION_MASK_POWER10 \
| OTHER_POWER10_MASKS)
+/* Flags for a potential future processor that may or may not be delivered. */
+#define ISA_FUTURE_MASKS (ISA_3_1_MASKS_SERVER \
+ | OPTION_MASK_FUTURE)
+
/* Flags that need to be turned off if -mno-power9-vector. */
#define OTHER_P9_VECTOR_MASKS (OPTION_MASK_FLOAT128_HW \
| OPTION_MASK_P9_MINMAX)
@@ -134,6 +138,7 @@
| OPTION_MASK_FPRND \
| OPTION_MASK_POWER10 \
| OPTION_MASK_P10_FUSION \
+ | OPTION_MASK_FUTURE \
| OPTION_MASK_HTM \
| OPTION_MASK_ISEL \
| OPTION_MASK_LOAD_VECTOR_PAIR \
@@ -267,3 +272,4 @@ RS6000_CPU ("powerpc64", PROCESSOR_POWERPC64, OPTION_MASK_PPC_GFXOPT
RS6000_CPU ("powerpc64le", PROCESSOR_POWER8, MASK_POWERPC64
| ISA_2_7_MASKS_SERVER | OPTION_MASK_HTM)
RS6000_CPU ("rs64", PROCESSOR_RS64A, OPTION_MASK_PPC_GFXOPT | MASK_POWERPC64)
+RS6000_CPU ("future", PROCESSOR_FUTURE, MASK_POWERPC64 | ISA_FUTURE_MASKS)
diff --git a/gcc/config/rs6000/rs6000-opts.h b/gcc/config/rs6000/rs6000-opts.h
index 8040cfdc06e..f56f01d6fa5 100644
--- a/gcc/config/rs6000/rs6000-opts.h
+++ b/gcc/config/rs6000/rs6000-opts.h
@@ -67,7 +67,9 @@ enum processor_type
PROCESSOR_MPCCORE,
PROCESSOR_CELL,
PROCESSOR_PPCA2,
- PROCESSOR_TITAN
+ PROCESSOR_TITAN,
+
+ PROCESSOR_FUTURE
};
diff --git a/gcc/config/rs6000/rs6000-tables.opt b/gcc/config/rs6000/rs6000-tables.opt
index b82f8205fa1..3ff28e39f6c 100644
--- a/gcc/config/rs6000/rs6000-tables.opt
+++ b/gcc/config/rs6000/rs6000-tables.opt
@@ -197,3 +197,6 @@ Enum(rs6000_cpu_opt_value) String(powerpc64le) Value(55)
EnumValue
Enum(rs6000_cpu_opt_value) String(rs64) Value(56)
+EnumValue
+Enum(rs6000_cpu_opt_value) String(future) Value(57)
+
diff --git a/gcc/config/rs6000/rs6000.cc b/gcc/config/rs6000/rs6000.cc
index 8f06b37171a..a48a161eb55 100644
--- a/gcc/config/rs6000/rs6000.cc
+++ b/gcc/config/rs6000/rs6000.cc
@@ -1800,6 +1800,18 @@ rs6000_cpu_name_lookup (const char *name)
return -1;
}
+/* Look up the index for a specific processor. */
+
+static int
+rs600_cpu_index_lookup (enum processor_type processor)
+{
+ for (size_t i = 0; i < ARRAY_SIZE (processor_target_table); i++)
+ if (processor_target_table[i].processor == processor)
+ return i;
+
+ return -1;
+}
+
\f
/* Return number of consecutive hard regs needed starting at reg REGNO
to hold something of mode MODE.
@@ -3746,23 +3758,45 @@ rs6000_option_override_internal (bool global_init_p)
rs6000_isa_flags &= ~OPTION_MASK_POWERPC64;
#endif
+ /* At the moment, we don't have explict -mtune=future support. If the user
+ explicitly tried to use -mtune=future, give a warning. If not, use the
+ power10 tuning until future tuning is added. */
if (rs6000_tune_index >= 0)
- tune_index = rs6000_tune_index;
+ {
+ enum processor_type cur_proc
+ = processor_target_table[rs6000_tune_index].processor;
+
+ if (cur_proc == PROCESSOR_FUTURE)
+ {
+ static bool issued_future_tune_warning = false;
+ if (!issued_future_tune_warning)
+ {
+ issued_future_tune_warning = true;
+ warning (0, "%qs is not currently supported", "-mtune=future");
+ }
+
+ rs6000_tune_index = rs600_cpu_index_lookup (PROCESSOR_POWER10);
+ }
+ tune_index = rs6000_tune_index;
+ }
else if (cpu_index >= 0)
- rs6000_tune_index = tune_index = cpu_index;
+ {
+ enum processor_type cur_cpu
+ = processor_target_table[cpu_index].processor;
+
+ rs6000_tune_index = tune_index
+ = (cur_cpu == PROCESSOR_FUTURE
+ ? rs600_cpu_index_lookup (PROCESSOR_POWER10)
+ : cpu_index);
+ }
else
{
- size_t i;
enum processor_type tune_proc
= (TARGET_POWERPC64 ? PROCESSOR_DEFAULT64 : PROCESSOR_DEFAULT);
- tune_index = -1;
- for (i = 0; i < ARRAY_SIZE (processor_target_table); i++)
- if (processor_target_table[i].processor == tune_proc)
- {
- tune_index = i;
- break;
- }
+ tune_index = rs600_cpu_index_lookup (tune_proc == PROCESSOR_FUTURE
+ ? PROCESSOR_POWER10
+ : tune_proc);
}
if (cpu_index >= 0)
@@ -4775,6 +4809,7 @@ rs6000_option_override_internal (bool global_init_p)
break;
case PROCESSOR_POWER10:
+ case PROCESSOR_FUTURE:
rs6000_cost = &power10_cost;
break;
@@ -5934,6 +5969,8 @@ rs6000_machine_from_flags (void)
/* Disable the flags that should never influence the .machine selection. */
flags &= ~(OPTION_MASK_PPC_GFXOPT | OPTION_MASK_PPC_GPOPT | OPTION_MASK_ISEL);
+ if ((flags & (ISA_FUTURE_MASKS & ~ISA_3_1_MASKS_SERVER)) != 0)
+ return "future";
if ((flags & (ISA_3_1_MASKS_SERVER & ~ISA_3_0_MASKS_SERVER)) != 0)
return "power10";
if ((flags & (ISA_3_0_MASKS_SERVER & ~ISA_2_7_MASKS_SERVER)) != 0)
@@ -24458,6 +24495,7 @@ static struct rs6000_opt_mask const rs6000_opt_masks[] =
{ "float128-hardware", OPTION_MASK_FLOAT128_HW, false, true },
{ "fprnd", OPTION_MASK_FPRND, false, true },
{ "power10", OPTION_MASK_POWER10, false, true },
+ { "future", OPTION_MASK_FUTURE, false, true },
{ "hard-dfp", OPTION_MASK_DFP, false, true },
{ "htm", OPTION_MASK_HTM, false, true },
{ "isel", OPTION_MASK_ISEL, false, true },
diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
index 22595f6ebd7..a9c9a11765c 100644
--- a/gcc/config/rs6000/rs6000.h
+++ b/gcc/config/rs6000/rs6000.h
@@ -163,6 +163,7 @@
mcpu=e5500: -me5500; \
mcpu=e6500: -me6500; \
mcpu=titan: -mtitan; \
+ mcpu=future: -mfuture; \
!mcpu*: %{mpower9-vector: -mpower9; \
mpower8-vector|mcrypto|mdirect-move|mhtm: -mpower8; \
mvsx: -mpower7; \
diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index 2a1b5ecfaee..bc530948aff 100644
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -351,7 +351,7 @@ (define_attr "cpu"
ppc403,ppc405,ppc440,ppc476,
ppc8540,ppc8548,ppce300c2,ppce300c3,ppce500mc,ppce500mc64,ppce5500,ppce6500,
power4,power5,power6,power7,power8,power9,power10,
- rs64a,mpccore,cell,ppca2,titan"
+ rs64a,mpccore,cell,ppca2,titan,future"
(const (symbol_ref "(enum attr_cpu) rs6000_tune")))
;; The ISA we implement.
diff --git a/gcc/config/rs6000/rs6000.opt b/gcc/config/rs6000/rs6000.opt
index 369095df9ed..6c8ca106b30 100644
--- a/gcc/config/rs6000/rs6000.opt
+++ b/gcc/config/rs6000/rs6000.opt
@@ -628,6 +628,10 @@ mieee128-constant
Target Var(TARGET_IEEE128_CONSTANT) Init(1) Save
Generate (do not generate) code that uses the LXVKQ instruction.
+mfuture
+Target Undocumented Mask(FUTURE) Var(rs6000_isa_flags)
+Generate (do not generate) future instructions.
+
; Documented parameters
-param=rs6000-vect-unroll-limit=
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index eb714d18511..3558e7effe7 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -29747,7 +29747,7 @@ Supported values for @var{cpu_type} are @samp{401}, @samp{403},
@samp{titan}, @samp{power3}, @samp{power4}, @samp{power5}, @samp{power5+},
@samp{power6}, @samp{power6x}, @samp{power7}, @samp{power8},
@samp{power9}, @samp{power10}, @samp{powerpc}, @samp{powerpc64},
-@samp{powerpc64le}, @samp{rs64}, and @samp{native}.
+@samp{powerpc64le}, @samp{rs64}, @samp{future}, and @samp{native}.
@option{-mcpu=powerpc}, @option{-mcpu=powerpc64}, and
@option{-mcpu=powerpc64le} specify pure 32-bit PowerPC (either
--
2.41.0
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair.
2023-10-18 23:55 [PATCH 0/6] PowerPC Future patches Michael Meissner
2023-10-18 23:58 ` [PATCH 1/6] PowerPC: Add -mcpu=future option Michael Meissner
@ 2023-10-19 0:00 ` Michael Meissner
2023-10-25 20:16 ` Ping: " Michael Meissner
2023-11-03 7:50 ` Ping #2: " Michael Meissner
2023-10-19 0:01 ` [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers Michael Meissner
` (3 subsequent siblings)
5 siblings, 2 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-19 0:00 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
This patch re-enables generating load and store vector pair instructions when
doing certain memory copy operations when -mcpu=future is used.
During power10 development, it was determined that using store vector pair
instructions were problematical in a few cases, so we disabled generating load
and store vector pair instructions for memory options by default. This patch
re-enables generating these instructions if -mcpu=future is used.
The patches have been tested on both little and big endian systems. Can I check
it into the master branch?
2023-10-18 Michael Meissner <meissner@linux.ibm.com>
gcc/
* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS): Add
-mblock-ops-vector-pair.
(POWERPC_MASKS): Likewise.
---
gcc/config/rs6000/rs6000-cpus.def | 2 ++
1 file changed, 2 insertions(+)
diff --git a/gcc/config/rs6000/rs6000-cpus.def b/gcc/config/rs6000/rs6000-cpus.def
index a6d9d7bf9a8..849af6b3ac8 100644
--- a/gcc/config/rs6000/rs6000-cpus.def
+++ b/gcc/config/rs6000/rs6000-cpus.def
@@ -90,6 +90,7 @@
/* Flags for a potential future processor that may or may not be delivered. */
#define ISA_FUTURE_MASKS (ISA_3_1_MASKS_SERVER \
+ | OPTION_MASK_BLOCK_OPS_VECTOR_PAIR \
| OPTION_MASK_FUTURE)
/* Flags that need to be turned off if -mno-power9-vector. */
@@ -127,6 +128,7 @@
/* Mask of all options to set the default isa flags based on -mcpu=<xxx>. */
#define POWERPC_MASKS (OPTION_MASK_ALTIVEC \
+ | OPTION_MASK_BLOCK_OPS_VECTOR_PAIR \
| OPTION_MASK_CMPB \
| OPTION_MASK_CRYPTO \
| OPTION_MASK_DFP \
--
2.41.0
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers.
2023-10-18 23:55 [PATCH 0/6] PowerPC Future patches Michael Meissner
2023-10-18 23:58 ` [PATCH 1/6] PowerPC: Add -mcpu=future option Michael Meissner
2023-10-19 0:00 ` [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair Michael Meissner
@ 2023-10-19 0:01 ` Michael Meissner
2023-10-25 20:18 ` Ping: " Michael Meissner
2023-11-03 7:51 ` Ping #2: " Michael Meissner
2023-10-19 0:03 ` [PATCH 4/6] PowerPC: Make MMA insns support " Michael Meissner
` (2 subsequent siblings)
5 siblings, 2 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-19 0:01 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
The MMA subsystem added the notion of accumulator registers as an optional
feature of ISA 3.1 (power10). In ISA 3.1, these accumulators overlapped with
the traditional floating point registers 0..31, but logically the accumulator
registers were separate from the FPR registers. In ISA 3.1, it was anticipated
that in future systems, the accumulator registers may no overlap with the FPR
registers. This patch adds the support for dense math registers as separate
registers.
This particular patch does not change the MMA support to use the accumulators
within the dense math registers. This patch just adds the basic support for
having separate DMRs. The next patch will switch the MMA support to use the
accumulators if -mcpu=future is used.
For testing purposes, I added an undocumented option '-mdense-math' to enable
or disable the dense math support.
This patch adds a new constraint (wD). If MMA is selected but dense math is
not selected (i.e. -mcpu=power10), the wD constraint will allow access to
accumulators that overlap with the VSX vector registers 0..31. If both MMA and
dense math are selected (i.e. -mcpu=future), the wD constraint will only allow
dense math registers.
This patch modifies the existing %A output modifier. If MMA is selected but
dense math is not selected, then %A output modifier converts the VSX register
number to the accumulator number, by dividing it by 4. If both MMA and dense
math are selected, then %A will map the separate DMR registers into 0..7.
The intention is that user code using extended asm can be modified to run on
both MMA without dense math and MMA with dense math:
1) If possible, don't use extended asm, but instead use the MMA built-in
functions;
2) If you do need to write extended asm, change the d constraints
targetting accumulators should now use wD;
3) Only use the built-in zero, assemble and disassemble functions create
move data between vector quad types and dense math accumulators.
I.e. do not use the xxmfacc, xxmtacc, and xxsetaccz directly in the
extended asm code. The reason is these instructions assume there is a
1-to-1 correspondence between 4 adjacent FPR registers and an
accumulator that overlaps with those instructions. With accumulators
now being separate registers, there no longer is a 1-to-1
correspondence.
It is possible that the mangling for DMRs and the GDB register numbers may
change in the future.
The patches have been tested on both little and big endian systems. Can I check
it into the master branch?
2023-10-18 Michael Meissner <meissner@linux.ibm.com>
gcc/
* config/rs6000/constraints.md (wD constraint): New constraint.
* config/rs6000/mma.md (UNSPEC_DM_ASSEMBLE_ACC): New unspec.
(movxo): Convert into define_expand.
(movxo_vsx): Version of movxo where accumulators overlap with VSX vector
registers 0..31.
(movxo_dm): Verson of movxo that supports separate dense math
accumulators.
(mma_assemble_acc): Add dense math support to define_expand.
(mma_assemble_acc_vsx): Rename from mma_assemble_acc, and restrict it to
non dense math systems.
(mma_assemble_acc_dm): Dense math version of mma_assemble_acc.
(mma_disassemble_acc): Add dense math support to define_expand.
(mma_disassemble_acc_vsx): Rename from mma_disassemble_acc, and restrict
it to non dense math systems.
(mma_disassemble_acc_dm): Dense math version of mma_disassemble_acc.
* config/rs6000/predicates.md (dmr_operand): New predicate.
(accumulator_operand): Likewise.
* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS): Add -mdense-math.
(POWERPC_MASKS): Likewise.
* config/rs6000/rs6000.cc (enum rs6000_reg_type): Add DMR_REG_TYPE.
(enum rs6000_reload_reg_type): Add RELOAD_REG_DMR.
(LAST_RELOAD_REG_CLASS): Add support for DMR registers and the wD
constraint.
(reload_reg_map): Likewise.
(rs6000_reg_names): Likewise.
(alt_reg_names): Likewise.
(rs6000_hard_regno_nregs_internal): Likewise.
(rs6000_hard_regno_mode_ok_uncached): Likewise.
(rs6000_debug_reg_global): Likewise.
(rs6000_setup_reg_addr_masks): Likewise.
(rs6000_init_hard_regno_mode_ok): Likewise.
(rs6000_option_override_internal): Add checking for -mdense-math.
(rs6000_secondary_reload_memory): Add support for DMR registers.
(rs6000_secondary_reload_simple_move): Likewise.
(rs6000_preferred_reload_class): Likewise.
(rs6000_secondary_reload_class): Likewise.
(print_operand): Make %A handle both FPRs and DMRs.
(rs6000_dmr_register_move_cost): New helper function.
(rs6000_register_move_cost): Add support for DMR registers.
(rs6000_memory_move_cost): Likewise.
(rs6000_compute_pressure_classes): Likewise.
(rs6000_debugger_regno): Likewise.
(rs6000_opt_masks): Add -mdense-math.
(rs6000_split_multireg_move): Add support for DMRs.
* config/rs6000/rs6000.h (UNITS_PER_DMR_WORD): New macro.
(FIRST_PSEUDO_REGISTER): Update for DMRs.
(FIXED_REGISTERS): Add DMRs.
(CALL_REALLY_USED_REGISTERS): Likewise.
(REG_ALLOC_ORDER): Likewise.
(enum reg_class): Add DM_REGS.
(REG_CLASS_NAMES): Likewise.
(REG_CLASS_CONTENTS): Likewise.
* config/rs6000/rs6000.md (FIRST_DMR_REGNO): New constant.
(LAST_DMR_REGNO): Likewise.
(isa attribute): Add 'dm' and 'not_dm' attributes.
(enabled attribute): Support 'dm' and 'not_dm' attributes.
* config/rs6000/rs6000.opt (-mdense-math): New switch.
* doc/md.texi (PowerPC constraints): Document wD constraint.
---
gcc/config/rs6000/constraints.md | 3 +
gcc/config/rs6000/mma.md | 115 ++++++++++++------
gcc/config/rs6000/predicates.md | 32 +++++
gcc/config/rs6000/rs6000-cpus.def | 2 +
gcc/config/rs6000/rs6000.cc | 189 ++++++++++++++++++++++++++----
gcc/config/rs6000/rs6000.h | 38 +++++-
gcc/config/rs6000/rs6000.md | 12 +-
gcc/config/rs6000/rs6000.opt | 4 +
gcc/doc/md.texi | 7 ++
9 files changed, 343 insertions(+), 59 deletions(-)
diff --git a/gcc/config/rs6000/constraints.md b/gcc/config/rs6000/constraints.md
index c4a6ccf4efb..218e41d82a8 100644
--- a/gcc/config/rs6000/constraints.md
+++ b/gcc/config/rs6000/constraints.md
@@ -107,6 +107,9 @@ (define_constraint "wB"
(match_test "TARGET_P8_VECTOR")
(match_operand 0 "s5bit_cint_operand")))
+(define_register_constraint "wD" "rs6000_constraints[RS6000_CONSTRAINT_wD]"
+ "Accumulator register.")
+
(define_constraint "wE"
"@internal Vector constant that can be loaded with the XXSPLTIB instruction."
(match_test "xxspltib_constant_nosplit (op, mode)"))
diff --git a/gcc/config/rs6000/mma.md b/gcc/config/rs6000/mma.md
index fc7e95bc167..d2c5b73fa8f 100644
--- a/gcc/config/rs6000/mma.md
+++ b/gcc/config/rs6000/mma.md
@@ -92,6 +92,7 @@ (define_c_enum "unspec"
UNSPEC_MMA_XXMFACC
UNSPEC_MMA_XXMTACC
UNSPEC_MMA_VECTOR_PAIR_MEMORY
+ UNSPEC_DM_ASSEMBLE_ACC
])
(define_c_enum "unspecv"
@@ -358,7 +359,9 @@ (define_insn_and_split "*vector_pair_memory_builtin"
(set_attr "length" "*,*,8")])
\f
-;; Vector quad support. XOmode can only live in FPRs.
+;; Vector quad support. Under the original MMA, XOmode can only live in VSX
+;; vector registers 0..31. With dense math, XOmode can live in either VSX
+;; registers (0..63) or DMR registers.
(define_expand "movxo"
[(set (match_operand:XO 0 "nonimmediate_operand")
(match_operand:XO 1 "input_operand"))]
@@ -383,10 +386,10 @@ (define_expand "movxo"
gcc_assert (false);
})
-(define_insn_and_split "*movxo"
+(define_insn_and_split "*movxo_nodm"
[(set (match_operand:XO 0 "nonimmediate_operand" "=d,ZwO,d")
(match_operand:XO 1 "input_operand" "ZwO,d,d"))]
- "TARGET_MMA
+ "TARGET_MMA && !TARGET_DENSE_MATH
&& (gpc_reg_operand (operands[0], XOmode)
|| gpc_reg_operand (operands[1], XOmode))"
"@
@@ -403,6 +406,31 @@ (define_insn_and_split "*movxo"
(set_attr "length" "*,*,16")
(set_attr "max_prefixed_insns" "2,2,*")])
+(define_insn_and_split "*movxo_dm"
+ [(set (match_operand:XO 0 "nonimmediate_operand" "=wa,QwO,wa,wD,wD,wa")
+ (match_operand:XO 1 "input_operand" "QwO,wa, wa,wa,wD,wD"))]
+ "TARGET_DENSE_MATH
+ && (gpc_reg_operand (operands[0], XOmode)
+ || gpc_reg_operand (operands[1], XOmode))"
+ "@
+ #
+ #
+ #
+ dmxxinstdmr512 %0,%1,%Y1,0
+ dmmr %0,%1
+ dmxxextfdmr512 %0,%Y0,%1,0"
+ "&& reload_completed
+ && !dmr_operand (operands[0], XOmode)
+ && !dmr_operand (operands[1], XOmode)"
+ [(const_int 0)]
+{
+ rs6000_split_multireg_move (operands[0], operands[1]);
+ DONE;
+}
+ [(set_attr "type" "vecload,vecstore,veclogical,mma,mma,mma")
+ (set_attr "length" "*,*,16,*,*,*")
+ (set_attr "max_prefixed_insns" "2,2,*,*,*,*")])
+
(define_expand "vsx_assemble_pair"
[(match_operand:OO 0 "vsx_register_operand")
(match_operand:V16QI 1 "mma_assemble_input_operand")
@@ -470,25 +498,38 @@ (define_insn_and_split "*vsx_disassemble_pair"
})
(define_expand "mma_assemble_acc"
- [(match_operand:XO 0 "fpr_reg_operand")
+ [(match_operand:XO 0 "register_operand")
(match_operand:V16QI 1 "mma_assemble_input_operand")
(match_operand:V16QI 2 "mma_assemble_input_operand")
(match_operand:V16QI 3 "mma_assemble_input_operand")
(match_operand:V16QI 4 "mma_assemble_input_operand")]
"TARGET_MMA"
{
- rtx src = gen_rtx_UNSPEC_VOLATILE (XOmode,
- gen_rtvec (4, operands[1], operands[2],
- operands[3], operands[4]),
- UNSPECV_MMA_ASSEMBLE);
- emit_move_insn (operands[0], src);
+ rtx op0 = operands[0];
+ rtx op1 = operands[1];
+ rtx op2 = operands[2];
+ rtx op3 = operands[3];
+ rtx op4 = operands[4];
+
+ if (TARGET_DENSE_MATH)
+ {
+ rtx vpair1 = gen_reg_rtx (OOmode);
+ rtx vpair2 = gen_reg_rtx (OOmode);
+ emit_insn (gen_vsx_assemble_pair (vpair1, op1, op2));
+ emit_insn (gen_vsx_assemble_pair (vpair2, op3, op4));
+ emit_insn (gen_mma_assemble_acc_dm (op0, vpair1, vpair2));
+ }
+
+ else
+ emit_insn (gen_mma_assemble_acc_vsx (op0, op1, op2, op3, op4));
+
DONE;
})
;; We cannot update the four output registers atomically, so mark the output
-;; as an early clobber so we don't accidentally clobber the input operands. */
+;; as an early clobber so we don't accidentally clobber the input operands.
-(define_insn_and_split "*mma_assemble_acc"
+(define_insn_and_split "mma_assemble_acc_vsx"
[(set (match_operand:XO 0 "fpr_reg_operand" "=&d")
(unspec_volatile:XO
[(match_operand:V16QI 1 "mma_assemble_input_operand" "mwa")
@@ -496,7 +537,7 @@ (define_insn_and_split "*mma_assemble_acc"
(match_operand:V16QI 3 "mma_assemble_input_operand" "mwa")
(match_operand:V16QI 4 "mma_assemble_input_operand" "mwa")]
UNSPECV_MMA_ASSEMBLE))]
- "TARGET_MMA
+ "TARGET_MMA && !TARGET_DENSE_MATH
&& fpr_reg_operand (operands[0], XOmode)"
"#"
"&& reload_completed"
@@ -510,28 +551,31 @@ (define_insn_and_split "*mma_assemble_acc"
DONE;
})
+;; On a system with dense math, we build the accumulators from two vector
+;; pairs.
+
+(define_insn "mma_assemble_acc_dm"
+ [(set (match_operand:XO 0 "dmr_operand" "=wD")
+ (unspec:XO [(match_operand:OO 1 "vsx_register_operand" "wa")
+ (match_operand:OO 2 "vsx_register_operand" "wa")]
+ UNSPEC_DM_ASSEMBLE_ACC))]
+ "TARGET_MMA && TARGET_DENSE_MATH"
+ "dmxxinstdmr512 %0,%1,%2,0"
+ [(set_attr "type" "mma")])
+
(define_expand "mma_disassemble_acc"
- [(match_operand:V16QI 0 "mma_disassemble_output_operand")
- (match_operand:XO 1 "fpr_reg_operand")
- (match_operand 2 "const_0_to_3_operand")]
- "TARGET_MMA"
-{
- rtx src;
- int regoff = INTVAL (operands[2]);
- src = gen_rtx_UNSPEC (V16QImode,
- gen_rtvec (2, operands[1], GEN_INT (regoff)),
- UNSPEC_MMA_EXTRACT);
- emit_move_insn (operands[0], src);
- DONE;
-})
+ [(set (match_operand:V16QI 0 "register_operand")
+ (unspec:V16QI [(match_operand:XO 1 "register_operand")
+ (match_operand 2 "const_0_to_3_operand")]
+ UNSPEC_MMA_EXTRACT))]
+ "TARGET_MMA")
-(define_insn_and_split "*mma_disassemble_acc"
+(define_insn_and_split "*mma_disassemble_acc_vsx"
[(set (match_operand:V16QI 0 "mma_disassemble_output_operand" "=mwa")
- (unspec:V16QI [(match_operand:XO 1 "fpr_reg_operand" "d")
- (match_operand 2 "const_0_to_3_operand")]
+ (unspec:V16QI [(match_operand:XO 1 "fpr_reg_operand" "d")
+ (match_operand 2 "const_0_to_3_operand")]
UNSPEC_MMA_EXTRACT))]
- "TARGET_MMA
- && fpr_reg_operand (operands[1], XOmode)"
+ "TARGET_MMA"
"#"
"&& reload_completed"
[(const_int 0)]
@@ -543,9 +587,14 @@ (define_insn_and_split "*mma_disassemble_acc"
DONE;
})
-;; MMA instructions that do not use their accumulators as an input, still
-;; must not allow their vector operands to overlap the registers used by
-;; the accumulator. We enforce this by marking the output as early clobber.
+(define_insn "*mma_disassemble_acc_dm"
+ [(set (match_operand:V16QI 0 "vsx_register_operand" "=wa")
+ (unspec:V16QI [(match_operand:XO 1 "dmr_operand" "wD")
+ (match_operand 2 "const_0_to_3_operand")]
+ UNSPEC_MMA_EXTRACT))]
+ "TARGET_DENSE_MATH"
+ "dmxxextfdmr256 %0,%1,2"
+ [(set_attr "type" "mma")])
(define_insn "mma_<acc>"
[(set (match_operand:XO 0 "fpr_reg_operand" "=&d")
diff --git a/gcc/config/rs6000/predicates.md b/gcc/config/rs6000/predicates.md
index ef7d3f214c4..4bcf1893949 100644
--- a/gcc/config/rs6000/predicates.md
+++ b/gcc/config/rs6000/predicates.md
@@ -186,6 +186,38 @@ (define_predicate "vlogical_operand"
return VLOGICAL_REGNO_P (REGNO (op));
})
+;; Return 1 if op is a DMR register
+(define_predicate "dmr_operand"
+ (match_operand 0 "register_operand")
+{
+ if (!REG_P (op))
+ return 0;
+
+ if (!HARD_REGISTER_P (op))
+ return 1;
+
+ return DMR_REGNO_P (REGNO (op));
+})
+
+;; Return 1 if op is an accumulator. On power10 systems, the accumulators
+;; overlap with the FPRs, while on systems with dense math, the accumulators
+;; are separate dense math registers and do not overlap with the FPR
+;; registers..
+(define_predicate "accumulator_operand"
+ (match_operand 0 "register_operand")
+{
+ if (!REG_P (op))
+ return 0;
+
+ if (!HARD_REGISTER_P (op))
+ return 1;
+
+ int r = REGNO (op);
+ return (TARGET_DENSE_MATH
+ ? DMR_REGNO_P (r)
+ : FP_REGNO_P (r) && (r & 3) == 0);
+})
+
;; Return 1 if op is the carry register.
(define_predicate "ca_operand"
(match_operand 0 "register_operand")
diff --git a/gcc/config/rs6000/rs6000-cpus.def b/gcc/config/rs6000/rs6000-cpus.def
index 849af6b3ac8..924c2571347 100644
--- a/gcc/config/rs6000/rs6000-cpus.def
+++ b/gcc/config/rs6000/rs6000-cpus.def
@@ -91,6 +91,7 @@
/* Flags for a potential future processor that may or may not be delivered. */
#define ISA_FUTURE_MASKS (ISA_3_1_MASKS_SERVER \
| OPTION_MASK_BLOCK_OPS_VECTOR_PAIR \
+ | OPTION_MASK_DENSE_MATH \
| OPTION_MASK_FUTURE)
/* Flags that need to be turned off if -mno-power9-vector. */
@@ -134,6 +135,7 @@
| OPTION_MASK_DFP \
| OPTION_MASK_DIRECT_MOVE \
| OPTION_MASK_DLMZB \
+ | OPTION_MASK_DENSE_MATH \
| OPTION_MASK_EFFICIENT_UNALIGNED_VSX \
| OPTION_MASK_FLOAT128_HW \
| OPTION_MASK_FLOAT128_KEYWORD \
diff --git a/gcc/config/rs6000/rs6000.cc b/gcc/config/rs6000/rs6000.cc
index a48a161eb55..056214d2ab1 100644
--- a/gcc/config/rs6000/rs6000.cc
+++ b/gcc/config/rs6000/rs6000.cc
@@ -290,7 +290,8 @@ enum rs6000_reg_type {
ALTIVEC_REG_TYPE,
FPR_REG_TYPE,
SPR_REG_TYPE,
- CR_REG_TYPE
+ CR_REG_TYPE,
+ DMR_REG_TYPE
};
/* Map register class to register type. */
@@ -304,22 +305,23 @@ static enum rs6000_reg_type reg_class_to_reg_type[N_REG_CLASSES];
/* Register classes we care about in secondary reload or go if legitimate
- address. We only need to worry about GPR, FPR, and Altivec registers here,
- along an ANY field that is the OR of the 3 register classes. */
+ address. We only need to worry about GPR, FPR, Altivec, and DMR registers
+ here, along an ANY field that is the OR of the 4 register classes. */
enum rs6000_reload_reg_type {
RELOAD_REG_GPR, /* General purpose registers. */
RELOAD_REG_FPR, /* Traditional floating point regs. */
RELOAD_REG_VMX, /* Altivec (VMX) registers. */
- RELOAD_REG_ANY, /* OR of GPR, FPR, Altivec masks. */
+ RELOAD_REG_DMR, /* DMR registers. */
+ RELOAD_REG_ANY, /* OR of GPR/FPR/VMX/DMR masks. */
N_RELOAD_REG
};
-/* For setting up register classes, loop through the 3 register classes mapping
+/* For setting up register classes, loop through the 4 register classes mapping
into real registers, and skip the ANY class, which is just an OR of the
bits. */
#define FIRST_RELOAD_REG_CLASS RELOAD_REG_GPR
-#define LAST_RELOAD_REG_CLASS RELOAD_REG_VMX
+#define LAST_RELOAD_REG_CLASS RELOAD_REG_DMR
/* Map reload register type to a register in the register class. */
struct reload_reg_map_type {
@@ -331,6 +333,7 @@ static const struct reload_reg_map_type reload_reg_map[N_RELOAD_REG] = {
{ "Gpr", FIRST_GPR_REGNO }, /* RELOAD_REG_GPR. */
{ "Fpr", FIRST_FPR_REGNO }, /* RELOAD_REG_FPR. */
{ "VMX", FIRST_ALTIVEC_REGNO }, /* RELOAD_REG_VMX. */
+ { "DMR", FIRST_DMR_REGNO }, /* RELOAD_REG_DMR. */
{ "Any", -1 }, /* RELOAD_REG_ANY. */
};
@@ -1224,6 +1227,8 @@ char rs6000_reg_names[][8] =
"0", "1", "2", "3", "4", "5", "6", "7",
/* vrsave vscr sfp */
"vrsave", "vscr", "sfp",
+ /* DMRs */
+ "0", "1", "2", "3", "4", "5", "6", "7",
};
#ifdef TARGET_REGNAMES
@@ -1250,6 +1255,8 @@ static const char alt_reg_names[][8] =
"%cr0", "%cr1", "%cr2", "%cr3", "%cr4", "%cr5", "%cr6", "%cr7",
/* vrsave vscr sfp */
"vrsave", "vscr", "sfp",
+ /* DMRs */
+ "%dmr0", "%dmr1", "%dmr2", "%dmr3", "%dmr4", "%dmr5", "%dmr6", "%dmr7",
};
#endif
@@ -1837,6 +1844,9 @@ rs6000_hard_regno_nregs_internal (int regno, machine_mode mode)
else if (ALTIVEC_REGNO_P (regno))
reg_size = UNITS_PER_ALTIVEC_WORD;
+ else if (DMR_REGNO_P (regno))
+ reg_size = UNITS_PER_DMR_WORD;
+
else
reg_size = UNITS_PER_WORD;
@@ -1858,9 +1868,36 @@ rs6000_hard_regno_mode_ok_uncached (int regno, machine_mode mode)
if (mode == OOmode)
return (TARGET_MMA && VSX_REGNO_P (regno) && (regno & 1) == 0);
- /* MMA accumulator modes need FPR registers divisible by 4. */
+ /* On ISA 3.1 (power10), MMA accumulator modes need FPR registers divisible
+ by 4.
+
+ If dense math is enabled, allow all VSX registers plus the DMR registers.
+ We need to make sure we don't cross between the boundary of FPRs and
+ traditional Altiviec registers. */
if (mode == XOmode)
- return (TARGET_MMA && FP_REGNO_P (regno) && (regno & 3) == 0);
+ {
+ if (TARGET_MMA && !TARGET_DENSE_MATH)
+ return (FP_REGNO_P (regno) && (regno & 3) == 0);
+
+ else if (TARGET_DENSE_MATH)
+ {
+ if (DMR_REGNO_P (regno))
+ return 1;
+
+ if (FP_REGNO_P (regno))
+ return ((regno & 1) == 0 && regno <= LAST_FPR_REGNO - 3);
+
+ if (ALTIVEC_REGNO_P (regno))
+ return ((regno & 1) == 0 && regno <= LAST_ALTIVEC_REGNO - 3);
+ }
+
+ else
+ return 0;
+ }
+
+ /* No other types other than XOmode can go in DMRs. */
+ if (DMR_REGNO_P (regno))
+ return 0;
/* PTImode can only go in GPRs. Quad word memory operations require even/odd
register combinations, and use PTImode where we need to deal with quad
@@ -2303,6 +2340,7 @@ rs6000_debug_reg_global (void)
rs6000_debug_reg_print (FIRST_ALTIVEC_REGNO,
LAST_ALTIVEC_REGNO,
"vs");
+ rs6000_debug_reg_print (FIRST_DMR_REGNO, LAST_DMR_REGNO, "dmr");
rs6000_debug_reg_print (LR_REGNO, LR_REGNO, "lr");
rs6000_debug_reg_print (CTR_REGNO, CTR_REGNO, "ctr");
rs6000_debug_reg_print (CR0_REGNO, CR7_REGNO, "cr");
@@ -2323,6 +2361,7 @@ rs6000_debug_reg_global (void)
"wr reg_class = %s\n"
"wx reg_class = %s\n"
"wA reg_class = %s\n"
+ "wD reg_class = %s\n"
"\n",
reg_class_names[rs6000_constraints[RS6000_CONSTRAINT_d]],
reg_class_names[rs6000_constraints[RS6000_CONSTRAINT_v]],
@@ -2330,7 +2369,8 @@ rs6000_debug_reg_global (void)
reg_class_names[rs6000_constraints[RS6000_CONSTRAINT_we]],
reg_class_names[rs6000_constraints[RS6000_CONSTRAINT_wr]],
reg_class_names[rs6000_constraints[RS6000_CONSTRAINT_wx]],
- reg_class_names[rs6000_constraints[RS6000_CONSTRAINT_wA]]);
+ reg_class_names[rs6000_constraints[RS6000_CONSTRAINT_wA]],
+ reg_class_names[rs6000_constraints[RS6000_CONSTRAINT_wD]]);
nl = "\n";
for (m = 0; m < NUM_MACHINE_MODES; ++m)
@@ -2627,6 +2667,21 @@ rs6000_setup_reg_addr_masks (void)
addr_mask = 0;
reg = reload_reg_map[rc].reg;
+ /* Special case DMR registers. */
+ if (rc == RELOAD_REG_DMR)
+ {
+ if (TARGET_DENSE_MATH && m2 == XOmode)
+ {
+ addr_mask = RELOAD_REG_VALID;
+ reg_addr[m].addr_mask[rc] = addr_mask;
+ any_addr_mask |= addr_mask;
+ }
+ else
+ reg_addr[m].addr_mask[rc] = 0;
+
+ continue;
+ }
+
/* Can mode values go in the GPR/FPR/Altivec registers? */
if (reg >= 0 && rs6000_hard_regno_mode_ok_p[m][reg])
{
@@ -2781,6 +2836,9 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p)
for (r = CR1_REGNO; r <= CR7_REGNO; ++r)
rs6000_regno_regclass[r] = CR_REGS;
+ for (r = FIRST_DMR_REGNO; r <= LAST_DMR_REGNO; ++r)
+ rs6000_regno_regclass[r] = DM_REGS;
+
rs6000_regno_regclass[LR_REGNO] = LINK_REGS;
rs6000_regno_regclass[CTR_REGNO] = CTR_REGS;
rs6000_regno_regclass[CA_REGNO] = NO_REGS;
@@ -2805,6 +2863,7 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p)
reg_class_to_reg_type[(int)LINK_OR_CTR_REGS] = SPR_REG_TYPE;
reg_class_to_reg_type[(int)CR_REGS] = CR_REG_TYPE;
reg_class_to_reg_type[(int)CR0_REGS] = CR_REG_TYPE;
+ reg_class_to_reg_type[(int)DM_REGS] = DMR_REG_TYPE;
if (TARGET_VSX)
{
@@ -2991,6 +3050,13 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p)
if (TARGET_DIRECT_MOVE_128)
rs6000_constraints[RS6000_CONSTRAINT_we] = VSX_REGS;
+ /* Support for the accumulator registers, either FPR registers (aka original
+ mma) or DMR registers (dense math). */
+ if (TARGET_DENSE_MATH)
+ rs6000_constraints[RS6000_CONSTRAINT_wD] = DM_REGS;
+ else if (TARGET_MMA)
+ rs6000_constraints[RS6000_CONSTRAINT_wD] = FLOAT_REGS;
+
/* Set up the reload helper and direct move functions. */
if (TARGET_VSX || TARGET_ALTIVEC)
{
@@ -4486,6 +4552,14 @@ rs6000_option_override_internal (bool global_init_p)
if (!TARGET_PCREL && TARGET_PCREL_OPT)
rs6000_isa_flags &= ~OPTION_MASK_PCREL_OPT;
+ /* Dense math requires MMA. */
+ if (TARGET_DENSE_MATH && !TARGET_MMA)
+ {
+ if ((rs6000_isa_flags_explicit & OPTION_MASK_DENSE_MATH) != 0)
+ error ("%qs requires %qs", "-mdense-math", "-mmma");
+ rs6000_isa_flags &= ~OPTION_MASK_DENSE_MATH;
+ }
+
if (TARGET_DEBUG_REG || TARGET_DEBUG_TARGET)
rs6000_print_isa_options (stderr, 0, "after subtarget", rs6000_isa_flags);
@@ -12379,6 +12453,11 @@ rs6000_secondary_reload_memory (rtx addr,
addr_mask = (reg_addr[mode].addr_mask[RELOAD_REG_VMX]
& ~RELOAD_REG_AND_M16);
+ /* DMR registers use VSX registers, and need to generate some extra
+ instructions. */
+ else if (rclass == DM_REGS)
+ return 2;
+
/* If the register allocator hasn't made up its mind yet on the register
class to use, settle on defaults to use. */
else if (rclass == NO_REGS)
@@ -12707,6 +12786,13 @@ rs6000_secondary_reload_simple_move (enum rs6000_reg_type to_type,
|| (to_type == SPR_REG_TYPE && from_type == GPR_REG_TYPE)))
return true;
+ /* We can transfer between VSX registers and DMR registers without needing
+ extra registers. */
+ if (TARGET_DENSE_MATH && mode == XOmode
+ && ((to_type == DMR_REG_TYPE && from_type == VSX_REG_TYPE)
+ || (to_type == VSX_REG_TYPE && from_type == DMR_REG_TYPE)))
+ return true;
+
return false;
}
@@ -13401,6 +13487,10 @@ rs6000_preferred_reload_class (rtx x, enum reg_class rclass)
machine_mode mode = GET_MODE (x);
bool is_constant = CONSTANT_P (x);
+ /* DMR registers can't be loaded or stored. */
+ if (rclass == DM_REGS)
+ return NO_REGS;
+
/* If a mode can't go in FPR/ALTIVEC/VSX registers, don't return a preferred
reload class for it. */
if ((rclass == ALTIVEC_REGS || rclass == VSX_REGS)
@@ -13497,7 +13587,7 @@ rs6000_preferred_reload_class (rtx x, enum reg_class rclass)
return VSX_REGS;
if (mode == XOmode)
- return FLOAT_REGS;
+ return TARGET_DENSE_MATH ? VSX_REGS : FLOAT_REGS;
if (GET_MODE_CLASS (mode) == MODE_INT)
return GENERAL_REGS;
@@ -13622,6 +13712,11 @@ rs6000_secondary_reload_class (enum reg_class rclass, machine_mode mode,
else
regno = -1;
+ /* DMR registers don't have loads or stores. We have to go through the VSX
+ registers to load XOmode (vector quad). */
+ if (TARGET_DENSE_MATH && rclass == DM_REGS)
+ return VSX_REGS;
+
/* If we have VSX register moves, prefer moving scalar values between
Altivec registers and GPR by going via an FPR (and then via memory)
instead of reloading the secondary memory address for Altivec moves. */
@@ -14135,8 +14230,14 @@ print_operand (FILE *file, rtx x, int code)
output_operand. */
case 'A':
- /* Write the MMA accumulator number associated with VSX register X. */
- if (!REG_P (x) || !FP_REGNO_P (REGNO (x)) || (REGNO (x) % 4) != 0)
+ /* Write the MMA accumulator number associated with VSX register X. On
+ dense math systems, only allow DMR accumulators, not accumulators
+ overlapping with the FPR registers. */
+ if (!REG_P (x))
+ output_operand_lossage ("invalid %%A value");
+ else if (TARGET_DENSE_MATH && DMR_REGNO_P (REGNO (x)))
+ fprintf (file, "%d", REGNO (x) - FIRST_DMR_REGNO);
+ else if (!FP_REGNO_P (REGNO (x)) || (REGNO (x) % 4) != 0)
output_operand_lossage ("invalid %%A value");
else
fprintf (file, "%d", (REGNO (x) - FIRST_FPR_REGNO) / 4);
@@ -22789,6 +22890,31 @@ rs6000_debug_address_cost (rtx x, machine_mode mode,
}
+/* Subroutine to determine the move cost of dense math registers. If we are
+ moving to/from VSX_REGISTER registers, the cost is either 1 move (for
+ 512-bit accumulators) or 2 moves (for 1,024 dmr registers). If we are
+ moving to anything else like GPR registers, make the cost very high. */
+
+static int
+rs6000_dmr_register_move_cost (machine_mode mode, reg_class_t rclass)
+{
+ const int reg_move_base = 2;
+ HARD_REG_SET vsx_set = (reg_class_contents[rclass]
+ & reg_class_contents[VSX_REGS]);
+
+ if (TARGET_DENSE_MATH && !hard_reg_set_empty_p (vsx_set))
+ {
+ /* __vector_quad (i.e. XOmode) is tranfered in 1 instruction. */
+ if (mode == XOmode)
+ return reg_move_base;
+
+ else
+ return reg_move_base * 2 * hard_regno_nregs (FIRST_DMR_REGNO, mode);
+ }
+
+ return 1000 * 2 * hard_regno_nregs (FIRST_DMR_REGNO, mode);
+}
+
/* A C expression returning the cost of moving data from a register of class
CLASS1 to one of CLASS2. */
@@ -22802,17 +22928,28 @@ rs6000_register_move_cost (machine_mode mode,
if (TARGET_DEBUG_COST)
dbg_cost_ctrl++;
+ HARD_REG_SET to_vsx, from_vsx;
+ to_vsx = reg_class_contents[to] & reg_class_contents[VSX_REGS];
+ from_vsx = reg_class_contents[from] & reg_class_contents[VSX_REGS];
+
+ /* Special case DMR registers, that can only move to/from VSX registers. */
+ if (from == DM_REGS && to == DM_REGS)
+ ret = 2 * hard_regno_nregs (FIRST_DMR_REGNO, mode);
+
+ else if (from == DM_REGS)
+ ret = rs6000_dmr_register_move_cost (mode, to);
+
+ else if (to == DM_REGS)
+ ret = rs6000_dmr_register_move_cost (mode, from);
+
/* If we have VSX, we can easily move between FPR or Altivec registers,
otherwise we can only easily move within classes.
Do this first so we give best-case answers for union classes
containing both gprs and vsx regs. */
- HARD_REG_SET to_vsx, from_vsx;
- to_vsx = reg_class_contents[to] & reg_class_contents[VSX_REGS];
- from_vsx = reg_class_contents[from] & reg_class_contents[VSX_REGS];
- if (!hard_reg_set_empty_p (to_vsx)
- && !hard_reg_set_empty_p (from_vsx)
- && (TARGET_VSX
- || hard_reg_set_intersect_p (to_vsx, from_vsx)))
+ else if (!hard_reg_set_empty_p (to_vsx)
+ && !hard_reg_set_empty_p (from_vsx)
+ && (TARGET_VSX
+ || hard_reg_set_intersect_p (to_vsx, from_vsx)))
{
int reg = FIRST_FPR_REGNO;
if (TARGET_VSX
@@ -22907,6 +23044,9 @@ rs6000_memory_move_cost (machine_mode mode, reg_class_t rclass,
ret = 4 * hard_regno_nregs (32, mode);
else if (reg_classes_intersect_p (rclass, ALTIVEC_REGS))
ret = 4 * hard_regno_nregs (FIRST_ALTIVEC_REGNO, mode);
+ else if (reg_classes_intersect_p (rclass, DM_REGS))
+ ret = (rs6000_dmr_register_move_cost (mode, VSX_REGS)
+ + rs6000_memory_move_cost (mode, VSX_REGS, false));
else
ret = 4 + rs6000_register_move_cost (mode, rclass, GENERAL_REGS);
@@ -24115,6 +24255,8 @@ rs6000_compute_pressure_classes (enum reg_class *pressure_classes)
if (TARGET_HARD_FLOAT)
pressure_classes[n++] = FLOAT_REGS;
}
+ if (TARGET_DENSE_MATH)
+ pressure_classes[n++] = DM_REGS;
pressure_classes[n++] = CR_REGS;
pressure_classes[n++] = SPECIAL_REGS;
@@ -24279,6 +24421,10 @@ rs6000_debugger_regno (unsigned int regno, unsigned int format)
return 67;
if (regno == 64)
return 64;
+ /* XXX: This is a guess. The GCC register number for FIRST_DMR_REGNO is 111,
+ but the frame pointer regnum uses that. */
+ if (DMR_REGNO_P (regno))
+ return regno - FIRST_DMR_REGNO + 112;
gcc_unreachable ();
}
@@ -24489,6 +24635,7 @@ static struct rs6000_opt_mask const rs6000_opt_masks[] =
{ "crypto", OPTION_MASK_CRYPTO, false, true },
{ "direct-move", OPTION_MASK_DIRECT_MOVE, false, true },
{ "dlmzb", OPTION_MASK_DLMZB, false, true },
+ { "dense-math", OPTION_MASK_DENSE_MATH, false, true },
{ "efficient-unaligned-vsx", OPTION_MASK_EFFICIENT_UNALIGNED_VSX,
false, true },
{ "float128", OPTION_MASK_FLOAT128_KEYWORD, false, true },
@@ -27575,7 +27722,9 @@ rs6000_split_multireg_move (rtx dst, rtx src)
|| XINT (src, 1) == UNSPECV_MMA_ASSEMBLE);
gcc_assert (REG_P (dst));
if (GET_MODE (src) == XOmode)
- gcc_assert (FP_REGNO_P (REGNO (dst)));
+ gcc_assert ((TARGET_DENSE_MATH
+ ? VSX_REGNO_P (REGNO (dst))
+ : FP_REGNO_P (REGNO (dst))));
if (GET_MODE (src) == OOmode)
gcc_assert (VSX_REGNO_P (REGNO (dst)));
diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
index a9c9a11765c..f2a303e83a6 100644
--- a/gcc/config/rs6000/rs6000.h
+++ b/gcc/config/rs6000/rs6000.h
@@ -662,6 +662,7 @@ extern unsigned char rs6000_recip_bits[];
#define UNITS_PER_FP_WORD 8
#define UNITS_PER_ALTIVEC_WORD 16
#define UNITS_PER_VSX_WORD 16
+#define UNITS_PER_DMR_WORD 128
/* Type used for ptrdiff_t, as a string used in a declaration. */
#define PTRDIFF_TYPE "int"
@@ -789,7 +790,7 @@ enum data_align { align_abi, align_opt, align_both };
Another pseudo (not included in DWARF_FRAME_REGISTERS) is soft frame
pointer, which is eventually eliminated in favor of SP or FP. */
-#define FIRST_PSEUDO_REGISTER 111
+#define FIRST_PSEUDO_REGISTER 119
/* Use standard DWARF numbering for DWARF debugging information. */
#define DEBUGGER_REGNO(REGNO) rs6000_debugger_regno ((REGNO), 0)
@@ -826,7 +827,9 @@ enum data_align { align_abi, align_opt, align_both };
/* cr0..cr7 */ \
0, 0, 0, 0, 0, 0, 0, 0, \
/* vrsave vscr sfp */ \
- 1, 1, 1 \
+ 1, 1, 1, \
+ /* DMR registers. */ \
+ 0, 0, 0, 0, 0, 0, 0, 0 \
}
/* Like `CALL_USED_REGISTERS' except this macro doesn't require that
@@ -850,7 +853,9 @@ enum data_align { align_abi, align_opt, align_both };
/* cr0..cr7 */ \
1, 1, 0, 0, 0, 1, 1, 1, \
/* vrsave vscr sfp */ \
- 0, 0, 0 \
+ 0, 0, 0, \
+ /* DMR registers. */ \
+ 0, 0, 0, 0, 0, 0, 0, 0 \
}
#define TOTAL_ALTIVEC_REGS (LAST_ALTIVEC_REGNO - FIRST_ALTIVEC_REGNO + 1)
@@ -887,6 +892,7 @@ enum data_align { align_abi, align_opt, align_both };
v2 (not saved; incoming vector arg reg; return value)
v19 - v14 (not saved or used for anything)
v31 - v20 (saved; order given to save least number)
+ dmr0 - dmr7 (not saved)
vrsave, vscr (fixed)
sfp (fixed)
*/
@@ -929,6 +935,9 @@ enum data_align { align_abi, align_opt, align_both };
66, \
83, 82, 81, 80, 79, 78, \
95, 94, 93, 92, 91, 90, 89, 88, 87, 86, 85, 84, \
+ /* DMR registers. */ \
+ 111, 112, 113, 114, 115, 116, 117, 118, \
+ /* Vrsave, vscr, sfp. */ \
108, 109, \
110 \
}
@@ -955,6 +964,9 @@ enum data_align { align_abi, align_opt, align_both };
/* True if register is a VSX register. */
#define VSX_REGNO_P(N) (FP_REGNO_P (N) || ALTIVEC_REGNO_P (N))
+/* True if register is a DMR register. */
+#define DMR_REGNO_P(N) ((N) >= FIRST_DMR_REGNO && (N) <= LAST_DMR_REGNO)
+
/* Alternate name for any vector register supporting floating point, no matter
which instruction set(s) are available. */
#define VFLOAT_REGNO_P(N) \
@@ -1090,6 +1102,7 @@ enum reg_class
FLOAT_REGS,
ALTIVEC_REGS,
VSX_REGS,
+ DM_REGS,
VRSAVE_REGS,
VSCR_REGS,
GEN_OR_FLOAT_REGS,
@@ -1119,6 +1132,7 @@ enum reg_class
"FLOAT_REGS", \
"ALTIVEC_REGS", \
"VSX_REGS", \
+ "DM_REGS", \
"VRSAVE_REGS", \
"VSCR_REGS", \
"GEN_OR_FLOAT_REGS", \
@@ -1153,6 +1167,8 @@ enum reg_class
{ 0x00000000, 0x00000000, 0xffffffff, 0x00000000 }, \
/* VSX_REGS. */ \
{ 0x00000000, 0xffffffff, 0xffffffff, 0x00000000 }, \
+ /* DM_REGS. */ \
+ { 0x00000000, 0x00000000, 0x00000000, 0x007f8000 }, \
/* VRSAVE_REGS. */ \
{ 0x00000000, 0x00000000, 0x00000000, 0x00001000 }, \
/* VSCR_REGS. */ \
@@ -1180,7 +1196,7 @@ enum reg_class
/* CA_REGS. */ \
{ 0x00000000, 0x00000000, 0x00000000, 0x00000004 }, \
/* ALL_REGS. */ \
- { 0xffffffff, 0xffffffff, 0xffffffff, 0x00007fff } \
+ { 0xffffffff, 0xffffffff, 0xffffffff, 0x007fffff } \
}
/* The same information, inverted:
@@ -1204,6 +1220,7 @@ enum r6000_reg_class_enum {
RS6000_CONSTRAINT_wr, /* GPR register if 64-bit */
RS6000_CONSTRAINT_wx, /* FPR register for STFIWX */
RS6000_CONSTRAINT_wA, /* BASE_REGS if 64-bit. */
+ RS6000_CONSTRAINT_wD, /* Accumulator regs if MMA/Dense Math. */
RS6000_CONSTRAINT_MAX
};
@@ -2077,7 +2094,16 @@ extern char rs6000_reg_names[][8]; /* register names (0 vs. %r0). */
&rs6000_reg_names[108][0], /* vrsave */ \
&rs6000_reg_names[109][0], /* vscr */ \
\
- &rs6000_reg_names[110][0] /* sfp */ \
+ &rs6000_reg_names[110][0], /* sfp */ \
+ \
+ &rs6000_reg_names[111][0], /* dmr0 */ \
+ &rs6000_reg_names[112][0], /* dmr1 */ \
+ &rs6000_reg_names[113][0], /* dmr2 */ \
+ &rs6000_reg_names[114][0], /* dmr3 */ \
+ &rs6000_reg_names[115][0], /* dmr4 */ \
+ &rs6000_reg_names[116][0], /* dmr5 */ \
+ &rs6000_reg_names[117][0], /* dmr6 */ \
+ &rs6000_reg_names[118][0], /* dmr7 */ \
}
/* Table of additional register names to use in user input. */
@@ -2131,6 +2157,8 @@ extern char rs6000_reg_names[][8]; /* register names (0 vs. %r0). */
{"vs52", 84}, {"vs53", 85}, {"vs54", 86}, {"vs55", 87}, \
{"vs56", 88}, {"vs57", 89}, {"vs58", 90}, {"vs59", 91}, \
{"vs60", 92}, {"vs61", 93}, {"vs62", 94}, {"vs63", 95}, \
+ {"dmr0", 111}, {"dmr1", 112}, {"dmr2", 113}, {"dmr3", 114}, \
+ {"dmr4", 115}, {"dmr5", 116}, {"dmr6", 117}, {"dmr7", 118}, \
}
/* This is how to output an element of a case-vector that is relative. */
diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index bc530948aff..c552c490ca4 100644
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -51,6 +51,8 @@ (define_constants
(VRSAVE_REGNO 108)
(VSCR_REGNO 109)
(FRAME_POINTER_REGNUM 110)
+ (FIRST_DMR_REGNO 111)
+ (LAST_DMR_REGNO 118)
])
;;
@@ -355,7 +357,7 @@ (define_attr "cpu"
(const (symbol_ref "(enum attr_cpu) rs6000_tune")))
;; The ISA we implement.
-(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p9,p9v,p9kf,p9tf,p10"
+(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p9,p9v,p9kf,p9tf,p10,dm,not_dm"
(const_string "any"))
;; Is this alternative enabled for the current CPU/ISA/etc.?
@@ -403,6 +405,14 @@ (define_attr "enabled" ""
(and (eq_attr "isa" "p10")
(match_test "TARGET_POWER10"))
(const_int 1)
+
+ (and (eq_attr "isa" "dm")
+ (match_test "TARGET_DENSE_MATH"))
+ (const_int 1)
+
+ (and (eq_attr "isa" "not_dm")
+ (match_test "!TARGET_DENSE_MATH"))
+ (const_int 1)
] (const_int 0)))
;; If this instruction is microcoded on the CELL processor
diff --git a/gcc/config/rs6000/rs6000.opt b/gcc/config/rs6000/rs6000.opt
index 6c8ca106b30..3c09154d63b 100644
--- a/gcc/config/rs6000/rs6000.opt
+++ b/gcc/config/rs6000/rs6000.opt
@@ -632,6 +632,10 @@ mfuture
Target Undocumented Mask(FUTURE) Var(rs6000_isa_flags)
Generate (do not generate) future instructions.
+mdense-math
+Target Undocumented Mask(DENSE_MATH) Var(rs6000_isa_flags)
+Generate (do not generate) dense math instructions.
+
; Documented parameters
-param=rs6000-vect-unroll-limit=
diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi
index daa318ee3da..fc080de4a39 100644
--- a/gcc/doc/md.texi
+++ b/gcc/doc/md.texi
@@ -3437,6 +3437,13 @@ Like @code{d}, if @option{-mpowerpc-gfxopt} is used; otherwise, @code{NO_REGS}.
@item wA
Like @code{b}, if @option{-mpowerpc64} is used; otherwise, @code{NO_REGS}.
+@item wD
+Accumulator register if @option{-mma} is used; otherwise,
+@code{NO_REGS}. If @option{-mdense-math} is used, the accumulator
+register will be in the dense match register set. If
+@option{-mno-dense-math} is used, the accumulator register will
+overlap with the VSX vector registers 0..31.
+
@item wB
Signed 5-bit constant integer that can be loaded into an Altivec register.
--
2.41.0
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 4/6] PowerPC: Make MMA insns support DMR registers.
2023-10-18 23:55 [PATCH 0/6] PowerPC Future patches Michael Meissner
` (2 preceding siblings ...)
2023-10-19 0:01 ` [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers Michael Meissner
@ 2023-10-19 0:03 ` Michael Meissner
2023-10-25 20:19 ` Ping: " Michael Meissner
2023-10-19 0:04 ` [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations Michael Meissner
2023-10-19 0:06 ` [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers Michael Meissner
5 siblings, 1 reply; 18+ messages in thread
From: Michael Meissner @ 2023-10-19 0:03 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
This patch changes the MMA instructions to use either FPR registers
(-mcpu=power10) or DMRs (-mcpu=future). In this patch, the existing MMA
instruction names are used.
A macro (__PPC_DMR__) is defined if the MMA instructions use the DMRs.
The patches have been tested on both little and big endian systems. Can I check
it into the master branch?
2023-10-18 Michael Meissner <meissner@linux.ibm.com>
gcc/
* config/rs6000/mma.md (mma_<acc>): New define_expand to handle
mma_<acc> for dense math and non dense math.
(mma_<acc> insn): Restrict to non dense math.
(mma_xxsetaccz): Convert to define_expand to handle non dense math and
dense math.
(mma_xxsetaccz_vsx): Rename from mma_xxsetaccz and restrict usage to non
dense math.
(mma_xxsetaccz_dm): Dense math version of mma_xxsetaccz.
(mma_<vv>): Add support for dense math.
(mma_<avv>): Likewise.
(mma_<pv>): Likewise.
(mma_<apv>): Likewise.
(mma_<vvi4i4i8>): Likewise.
(mma_<avvi4i4i8>): Likewise.
(mma_<vvi4i4i2>): Likewise.
(mma_<avvi4i4i2>): Likewise.
(mma_<vvi4i4>): Likewise.
(mma_<avvi4i4>): Likewise.
(mma_<pvi4i2>): Likewise.
(mma_<apvi4i2>): Likewise.
(mma_<vvi4i4i4>): Likewise.
(mma_<avvi4i4i4>): Likewise.
* config/rs6000/rs6000-c.cc (rs6000_target_modify_macros): Define
__PPC_DMR__ if we have dense math instructions.
* config/rs6000/rs6000.cc (print_operand): Make %A handle only DMRs if
dense math and only FPRs if not dense math.
(rs6000_split_multireg_move): Do not generate the xxmtacc instruction to
prime the DMR registers or the xxmfacc instruction to de-prime
instructions if we have dense math register support.
---
gcc/config/rs6000/mma.md | 247 +++++++++++++++++++++-------------
gcc/config/rs6000/rs6000-c.cc | 3 +
gcc/config/rs6000/rs6000.cc | 35 ++---
3 files changed, 176 insertions(+), 109 deletions(-)
diff --git a/gcc/config/rs6000/mma.md b/gcc/config/rs6000/mma.md
index d2c5b73fa8f..e5589d8eccc 100644
--- a/gcc/config/rs6000/mma.md
+++ b/gcc/config/rs6000/mma.md
@@ -596,190 +596,249 @@ (define_insn "*mma_disassemble_acc_dm"
"dmxxextfdmr256 %0,%1,2"
[(set_attr "type" "mma")])
-(define_insn "mma_<acc>"
+;; MMA instructions that do not use their accumulators as an input, still must
+;; not allow their vector operands to overlap the registers used by the
+;; accumulator. We enforce this by marking the output as early clobber. If we
+;; have dense math, we don't need the whole prime/de-prime action, so just make
+;; thse instructions be NOPs.
+
+(define_expand "mma_<acc>"
+ [(set (match_operand:XO 0 "register_operand")
+ (unspec:XO [(match_operand:XO 1 "register_operand")]
+ MMA_ACC))]
+ "TARGET_MMA"
+{
+ if (TARGET_DENSE_MATH)
+ {
+ if (!rtx_equal_p (operands[0], operands[1]))
+ emit_move_insn (operands[0], operands[1]);
+ DONE;
+ }
+
+ /* Generate the prime/de-prime code. */
+})
+
+(define_insn "*mma_<acc>"
[(set (match_operand:XO 0 "fpr_reg_operand" "=&d")
(unspec:XO [(match_operand:XO 1 "fpr_reg_operand" "0")]
MMA_ACC))]
- "TARGET_MMA"
+ "TARGET_MMA && !TARGET_DENSE_MATH"
"<acc> %A0"
[(set_attr "type" "mma")])
;; We can't have integer constants in XOmode so we wrap this in an
-;; UNSPEC_VOLATILE.
+;; UNSPEC_VOLATILE for the non-dense math case. For dense math, we don't need
+;; to disable optimization and we can do a normal UNSPEC.
-(define_insn "mma_xxsetaccz"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=d")
+(define_expand "mma_xxsetaccz"
+ [(set (match_operand:XO 0 "register_operand")
(unspec_volatile:XO [(const_int 0)]
UNSPECV_MMA_XXSETACCZ))]
"TARGET_MMA"
+{
+ if (TARGET_DENSE_MATH)
+ {
+ emit_insn (gen_mma_xxsetaccz_dm (operands[0]));
+ DONE;
+ }
+})
+
+(define_insn "*mma_xxsetaccz_vsx"
+ [(set (match_operand:XO 0 "fpr_reg_operand" "=d")
+ (unspec_volatile:XO [(const_int 0)]
+ UNSPECV_MMA_XXSETACCZ))]
+ "TARGET_MMA && !TARGET_DENSE_MATH"
"xxsetaccz %A0"
[(set_attr "type" "mma")])
+
+(define_insn "mma_xxsetaccz_dm"
+ [(set (match_operand:XO 0 "dmr_operand" "=wD")
+ (unspec:XO [(const_int 0)]
+ UNSPECV_MMA_XXSETACCZ))]
+ "TARGET_DENSE_MATH"
+ "dmsetdmrz %0"
+ [(set_attr "type" "mma")])
+
(define_insn "mma_<vv>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")]
MMA_VV))]
"TARGET_MMA"
"<vv> %A0,%x1,%x2"
- [(set_attr "type" "mma")])
+ [(set_attr "type" "mma")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<avv>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:XO 1 "fpr_reg_operand" "0,0")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 3 "vsx_register_operand" "v,?wa")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:XO 1 "accumulator_operand" "0,0,0")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 3 "vsx_register_operand" "wa,v,?wa")]
MMA_AVV))]
"TARGET_MMA"
"<avv> %A0,%x2,%x3"
- [(set_attr "type" "mma")])
+ [(set_attr "type" "mma")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<pv>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:OO 1 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:OO 1 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")]
MMA_PV))]
"TARGET_MMA"
"<pv> %A0,%x1,%x2"
- [(set_attr "type" "mma")])
+ [(set_attr "type" "mma")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<apv>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:XO 1 "fpr_reg_operand" "0,0")
- (match_operand:OO 2 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 3 "vsx_register_operand" "v,?wa")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:XO 1 "accumulator_operand" "0,0,0")
+ (match_operand:OO 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 3 "vsx_register_operand" "wa,v,?wa")]
MMA_APV))]
"TARGET_MMA"
"<apv> %A0,%x2,%x3"
- [(set_attr "type" "mma")])
+ [(set_attr "type" "mma")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<vvi4i4i8>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:SI 3 "const_0_to_15_operand" "n,n")
- (match_operand:SI 4 "const_0_to_15_operand" "n,n")
- (match_operand:SI 5 "u8bit_cint_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 3 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 4 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 5 "u8bit_cint_operand" "n,n,n")]
MMA_VVI4I4I8))]
"TARGET_MMA"
"<vvi4i4i8> %A0,%x1,%x2,%3,%4,%5"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<avvi4i4i8>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:XO 1 "fpr_reg_operand" "0,0")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 3 "vsx_register_operand" "v,?wa")
- (match_operand:SI 4 "const_0_to_15_operand" "n,n")
- (match_operand:SI 5 "const_0_to_15_operand" "n,n")
- (match_operand:SI 6 "u8bit_cint_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:XO 1 "accumulator_operand" "0,0,0")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 3 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 4 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 5 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 6 "u8bit_cint_operand" "n,n,n")]
MMA_AVVI4I4I8))]
"TARGET_MMA"
"<avvi4i4i8> %A0,%x2,%x3,%4,%5,%6"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<vvi4i4i2>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:SI 3 "const_0_to_15_operand" "n,n")
- (match_operand:SI 4 "const_0_to_15_operand" "n,n")
- (match_operand:SI 5 "const_0_to_3_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 3 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 4 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 5 "const_0_to_3_operand" "n,n,n")]
MMA_VVI4I4I2))]
"TARGET_MMA"
"<vvi4i4i2> %A0,%x1,%x2,%3,%4,%5"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<avvi4i4i2>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:XO 1 "fpr_reg_operand" "0,0")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 3 "vsx_register_operand" "v,?wa")
- (match_operand:SI 4 "const_0_to_15_operand" "n,n")
- (match_operand:SI 5 "const_0_to_15_operand" "n,n")
- (match_operand:SI 6 "const_0_to_3_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:XO 1 "accumulator_operand" "0,0,0")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 3 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 4 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 5 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 6 "const_0_to_3_operand" "n,n,n")]
MMA_AVVI4I4I2))]
"TARGET_MMA"
"<avvi4i4i2> %A0,%x2,%x3,%4,%5,%6"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<vvi4i4>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:SI 3 "const_0_to_15_operand" "n,n")
- (match_operand:SI 4 "const_0_to_15_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 3 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 4 "const_0_to_15_operand" "n,n,n")]
MMA_VVI4I4))]
"TARGET_MMA"
"<vvi4i4> %A0,%x1,%x2,%3,%4"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<avvi4i4>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:XO 1 "fpr_reg_operand" "0,0")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 3 "vsx_register_operand" "v,?wa")
- (match_operand:SI 4 "const_0_to_15_operand" "n,n")
- (match_operand:SI 5 "const_0_to_15_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:XO 1 "accumulator_operand" "0,0,0")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 3 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 4 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 5 "const_0_to_15_operand" "n,n,n")]
MMA_AVVI4I4))]
"TARGET_MMA"
"<avvi4i4> %A0,%x2,%x3,%4,%5"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<pvi4i2>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:OO 1 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:SI 3 "const_0_to_15_operand" "n,n")
- (match_operand:SI 4 "const_0_to_3_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:OO 1 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 3 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 4 "const_0_to_3_operand" "n,n,n")]
MMA_PVI4I2))]
"TARGET_MMA"
"<pvi4i2> %A0,%x1,%x2,%3,%4"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<apvi4i2>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:XO 1 "fpr_reg_operand" "0,0")
- (match_operand:OO 2 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 3 "vsx_register_operand" "v,?wa")
- (match_operand:SI 4 "const_0_to_15_operand" "n,n")
- (match_operand:SI 5 "const_0_to_3_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:XO 1 "accumulator_operand" "0,0,0")
+ (match_operand:OO 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 3 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 4 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 5 "const_0_to_3_operand" "n,n,n")]
MMA_APVI4I2))]
"TARGET_MMA"
"<apvi4i2> %A0,%x2,%x3,%4,%5"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<vvi4i4i4>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:SI 3 "const_0_to_15_operand" "n,n")
- (match_operand:SI 4 "const_0_to_15_operand" "n,n")
- (match_operand:SI 5 "const_0_to_15_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:V16QI 1 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 3 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 4 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 5 "const_0_to_15_operand" "n,n,n")]
MMA_VVI4I4I4))]
"TARGET_MMA"
"<vvi4i4i4> %A0,%x1,%x2,%3,%4,%5"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
(define_insn "mma_<avvi4i4i4>"
- [(set (match_operand:XO 0 "fpr_reg_operand" "=&d,&d")
- (unspec:XO [(match_operand:XO 1 "fpr_reg_operand" "0,0")
- (match_operand:V16QI 2 "vsx_register_operand" "v,?wa")
- (match_operand:V16QI 3 "vsx_register_operand" "v,?wa")
- (match_operand:SI 4 "const_0_to_15_operand" "n,n")
- (match_operand:SI 5 "const_0_to_15_operand" "n,n")
- (match_operand:SI 6 "const_0_to_15_operand" "n,n")]
+ [(set (match_operand:XO 0 "accumulator_operand" "=wD,&d,&d")
+ (unspec:XO [(match_operand:XO 1 "accumulator_operand" "0,0,0")
+ (match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:V16QI 3 "vsx_register_operand" "wa,v,?wa")
+ (match_operand:SI 4 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 5 "const_0_to_15_operand" "n,n,n")
+ (match_operand:SI 6 "const_0_to_15_operand" "n,n,n")]
MMA_AVVI4I4I4))]
"TARGET_MMA"
"<avvi4i4i4> %A0,%x2,%x3,%4,%5,%6"
[(set_attr "type" "mma")
- (set_attr "prefixed" "yes")])
+ (set_attr "prefixed" "yes")
+ (set_attr "isa" "dm,not_dm,not_dm")])
diff --git a/gcc/config/rs6000/rs6000-c.cc b/gcc/config/rs6000/rs6000-c.cc
index e276c20cccd..4fccb6d251f 100644
--- a/gcc/config/rs6000/rs6000-c.cc
+++ b/gcc/config/rs6000/rs6000-c.cc
@@ -600,6 +600,9 @@ rs6000_target_modify_macros (bool define_p, HOST_WIDE_INT flags)
/* Tell the user if we support the MMA instructions. */
if ((flags & OPTION_MASK_MMA) != 0)
rs6000_define_or_undefine_macro (define_p, "__MMA__");
+ /* Tell the user if we support the dense math instructions. */
+ if ((flags & OPTION_MASK_DENSE_MATH) != 0)
+ rs6000_define_or_undefine_macro (define_p, "__PPC_DMR__");
/* Whether pc-relative code is being generated. */
if ((flags & OPTION_MASK_PCREL) != 0)
rs6000_define_or_undefine_macro (define_p, "__PCREL__");
diff --git a/gcc/config/rs6000/rs6000.cc b/gcc/config/rs6000/rs6000.cc
index 056214d2ab1..7d8b9ec442b 100644
--- a/gcc/config/rs6000/rs6000.cc
+++ b/gcc/config/rs6000/rs6000.cc
@@ -14235,8 +14235,13 @@ print_operand (FILE *file, rtx x, int code)
overlapping with the FPR registers. */
if (!REG_P (x))
output_operand_lossage ("invalid %%A value");
- else if (TARGET_DENSE_MATH && DMR_REGNO_P (REGNO (x)))
- fprintf (file, "%d", REGNO (x) - FIRST_DMR_REGNO);
+ else if (TARGET_DENSE_MATH)
+ {
+ if (DMR_REGNO_P (REGNO (x)))
+ fprintf (file, "%d", REGNO (x) - FIRST_DMR_REGNO);
+ else
+ output_operand_lossage ("%%A operand is not a DMR");
+ }
else if (!FP_REGNO_P (REGNO (x)) || (REGNO (x) % 4) != 0)
output_operand_lossage ("invalid %%A value");
else
@@ -27674,7 +27679,7 @@ rs6000_split_multireg_move (rtx dst, rtx src)
/* If we are reading an accumulator register, we have to
deprime it before we can access it. */
- if (TARGET_MMA
+ if (TARGET_MMA && !TARGET_DENSE_MATH
&& GET_MODE (src) == XOmode && FP_REGNO_P (REGNO (src)))
emit_insn (gen_mma_xxmfacc (src, src));
@@ -27706,9 +27711,9 @@ rs6000_split_multireg_move (rtx dst, rtx src)
emit_insn (gen_rtx_SET (dst2, src2));
}
- /* If we are writing an accumulator register, we have to
- prime it after we've written it. */
- if (TARGET_MMA
+ /* If we are writing an accumulator register that overlaps with the
+ FPR registers, we have to prime it after we've written it. */
+ if (TARGET_MMA && !TARGET_DENSE_MATH
&& GET_MODE (dst) == XOmode && FP_REGNO_P (REGNO (dst)))
emit_insn (gen_mma_xxmtacc (dst, dst));
@@ -27777,9 +27782,9 @@ rs6000_split_multireg_move (rtx dst, rtx src)
emit_insn (gen_rtx_SET (dst_i, op));
}
- /* We are writing an accumulator register, so we have to
- prime it after we've written it. */
- if (GET_MODE (src) == XOmode)
+ /* On systems without dense math where accumulators overlap with the
+ vector registers, we have to prime it after we've written it. */
+ if (GET_MODE (src) == XOmode && !TARGET_DENSE_MATH)
emit_insn (gen_mma_xxmtacc (dst, dst));
return;
@@ -27790,9 +27795,9 @@ rs6000_split_multireg_move (rtx dst, rtx src)
if (REG_P (src) && REG_P (dst) && (REGNO (src) < REGNO (dst)))
{
- /* If we are reading an accumulator register, we have to
- deprime it before we can access it. */
- if (TARGET_MMA
+ /* If we are reading an accumulator register and we don't have dense
+ math, we have to deprime it before we can access it. */
+ if (TARGET_MMA && !TARGET_DENSE_MATH
&& GET_MODE (src) == XOmode && FP_REGNO_P (REGNO (src)))
emit_insn (gen_mma_xxmfacc (src, src));
@@ -27820,7 +27825,7 @@ rs6000_split_multireg_move (rtx dst, rtx src)
/* If we are writing an accumulator register, we have to
prime it after we've written it. */
- if (TARGET_MMA
+ if (TARGET_MMA && !TARGET_DENSE_MATH
&& GET_MODE (dst) == XOmode && FP_REGNO_P (REGNO (dst)))
emit_insn (gen_mma_xxmtacc (dst, dst));
}
@@ -27957,7 +27962,7 @@ rs6000_split_multireg_move (rtx dst, rtx src)
/* If we are reading an accumulator register, we have to
deprime it before we can access it. */
- if (TARGET_MMA && REG_P (src)
+ if (TARGET_MMA && !TARGET_DENSE_MATH && REG_P (src)
&& GET_MODE (src) == XOmode && FP_REGNO_P (REGNO (src)))
emit_insn (gen_mma_xxmfacc (src, src));
@@ -27989,7 +27994,7 @@ rs6000_split_multireg_move (rtx dst, rtx src)
/* If we are writing an accumulator register, we have to
prime it after we've written it. */
- if (TARGET_MMA && REG_P (dst)
+ if (TARGET_MMA && !TARGET_DENSE_MATH && REG_P (dst)
&& GET_MODE (dst) == XOmode && FP_REGNO_P (REGNO (dst)))
emit_insn (gen_mma_xxmtacc (dst, dst));
--
2.41.0
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations.
2023-10-18 23:55 [PATCH 0/6] PowerPC Future patches Michael Meissner
` (3 preceding siblings ...)
2023-10-19 0:03 ` [PATCH 4/6] PowerPC: Make MMA insns support " Michael Meissner
@ 2023-10-19 0:04 ` Michael Meissner
2023-10-25 20:20 ` Ping: " Michael Meissner
2023-11-03 7:52 ` Ping #2: " Michael Meissner
2023-10-19 0:06 ` [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers Michael Meissner
5 siblings, 2 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-19 0:04 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
This patch changes the assembler instruction names for MMA instructions from
the original name used in power10 to the new name when used with the dense math
system. I.e. xvf64gerpp becomes dmxvf64gerpp. The assembler will emit the
same bits for either spelling.
The patches have been tested on both little and big endian systems. Can I check
it into the master branch?
2023-10-18 Michael Meissner <meissner@linux.ibm.com>
gcc/
* config/rs6000/mma.md (vvi4i4i8_dm): New int attribute.
(avvi4i4i8_dm): Likewise.
(vvi4i4i2_dm): Likewise.
(avvi4i4i2_dm): Likewise.
(vvi4i4_dm): Likewise.
(avvi4i4_dm): Likewise.
(pvi4i2_dm): Likewise.
(apvi4i2_dm): Likewise.
(vvi4i4i4_dm): Likewise.
(avvi4i4i4_dm): Likewise.
(mma_<vv>): Add support for running on DMF systems, generating the dense
math instruction and using the dense math accumulators.
(mma_<avv>): Likewise.
(mma_<pv>): Likewise.
(mma_<apv>): Likewise.
(mma_<vvi4i4i8>): Likewise.
(mma_<avvi4i4i8>): Likewise.
(mma_<vvi4i4i2>): Likewise.
(mma_<avvi4i4i2>): Likewise.
(mma_<vvi4i4>): Likewise.
(mma_<avvi4i4): Likewise.
(mma_<pvi4i2>): Likewise.
(mma_<apvi4i2): Likewise.
(mma_<vvi4i4i4>): Likewise.
(mma_<avvi4i4i4>): Likewise.
gcc/testsuite/
* gcc.target/powerpc/dm-double-test.c: New test.
* lib/target-supports.exp (check_effective_target_ppc_dmr_ok): New
target test.
---
gcc/config/rs6000/mma.md | 98 +++++++--
.../gcc.target/powerpc/dm-double-test.c | 194 ++++++++++++++++++
gcc/testsuite/lib/target-supports.exp | 19 ++
3 files changed, 299 insertions(+), 12 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/powerpc/dm-double-test.c
diff --git a/gcc/config/rs6000/mma.md b/gcc/config/rs6000/mma.md
index e5589d8eccc..cae407bc37c 100644
--- a/gcc/config/rs6000/mma.md
+++ b/gcc/config/rs6000/mma.md
@@ -228,13 +228,22 @@ (define_int_attr apv [(UNSPEC_MMA_XVF64GERPP "xvf64gerpp")
(define_int_attr vvi4i4i8 [(UNSPEC_MMA_PMXVI4GER8 "pmxvi4ger8")])
+(define_int_attr vvi4i4i8_dm [(UNSPEC_MMA_PMXVI4GER8 "pmdmxvi4ger8")])
+
(define_int_attr avvi4i4i8 [(UNSPEC_MMA_PMXVI4GER8PP "pmxvi4ger8pp")])
+(define_int_attr avvi4i4i8_dm [(UNSPEC_MMA_PMXVI4GER8PP "pmdmxvi4ger8pp")])
+
(define_int_attr vvi4i4i2 [(UNSPEC_MMA_PMXVI16GER2 "pmxvi16ger2")
(UNSPEC_MMA_PMXVI16GER2S "pmxvi16ger2s")
(UNSPEC_MMA_PMXVF16GER2 "pmxvf16ger2")
(UNSPEC_MMA_PMXVBF16GER2 "pmxvbf16ger2")])
+(define_int_attr vvi4i4i2_dm [(UNSPEC_MMA_PMXVI16GER2 "pmdmxvi16ger2")
+ (UNSPEC_MMA_PMXVI16GER2S "pmdmxvi16ger2s")
+ (UNSPEC_MMA_PMXVF16GER2 "pmdmxvf16ger2")
+ (UNSPEC_MMA_PMXVBF16GER2 "pmdmxvbf16ger2")])
+
(define_int_attr avvi4i4i2 [(UNSPEC_MMA_PMXVI16GER2PP "pmxvi16ger2pp")
(UNSPEC_MMA_PMXVI16GER2SPP "pmxvi16ger2spp")
(UNSPEC_MMA_PMXVF16GER2PP "pmxvf16ger2pp")
@@ -246,25 +255,54 @@ (define_int_attr avvi4i4i2 [(UNSPEC_MMA_PMXVI16GER2PP "pmxvi16ger2pp")
(UNSPEC_MMA_PMXVBF16GER2NP "pmxvbf16ger2np")
(UNSPEC_MMA_PMXVBF16GER2NN "pmxvbf16ger2nn")])
+(define_int_attr avvi4i4i2_dm [(UNSPEC_MMA_PMXVI16GER2PP "pmdmxvi16ger2pp")
+ (UNSPEC_MMA_PMXVI16GER2SPP "pmdmxvi16ger2spp")
+ (UNSPEC_MMA_PMXVF16GER2PP "pmdmxvf16ger2pp")
+ (UNSPEC_MMA_PMXVF16GER2PN "pmdmxvf16ger2pn")
+ (UNSPEC_MMA_PMXVF16GER2NP "pmdmxvf16ger2np")
+ (UNSPEC_MMA_PMXVF16GER2NN "pmdmxvf16ger2nn")
+ (UNSPEC_MMA_PMXVBF16GER2PP "pmdmxvbf16ger2pp")
+ (UNSPEC_MMA_PMXVBF16GER2PN "pmdmxvbf16ger2pn")
+ (UNSPEC_MMA_PMXVBF16GER2NP "pmdmxvbf16ger2np")
+ (UNSPEC_MMA_PMXVBF16GER2NN "pmdmxvbf16ger2nn")])
+
(define_int_attr vvi4i4 [(UNSPEC_MMA_PMXVF32GER "pmxvf32ger")])
+(define_int_attr vvi4i4_dm [(UNSPEC_MMA_PMXVF32GER "pmdmxvf32ger")])
+
(define_int_attr avvi4i4 [(UNSPEC_MMA_PMXVF32GERPP "pmxvf32gerpp")
(UNSPEC_MMA_PMXVF32GERPN "pmxvf32gerpn")
(UNSPEC_MMA_PMXVF32GERNP "pmxvf32gernp")
(UNSPEC_MMA_PMXVF32GERNN "pmxvf32gernn")])
+(define_int_attr avvi4i4_dm [(UNSPEC_MMA_PMXVF32GERPP "pmdmxvf32gerpp")
+ (UNSPEC_MMA_PMXVF32GERPN "pmdmxvf32gerpn")
+ (UNSPEC_MMA_PMXVF32GERNP "pmdmxvf32gernp")
+ (UNSPEC_MMA_PMXVF32GERNN "pmdmxvf32gernn")])
+
(define_int_attr pvi4i2 [(UNSPEC_MMA_PMXVF64GER "pmxvf64ger")])
+(define_int_attr pvi4i2_dm [(UNSPEC_MMA_PMXVF64GER "pmdmxvf64ger")])
+
(define_int_attr apvi4i2 [(UNSPEC_MMA_PMXVF64GERPP "pmxvf64gerpp")
(UNSPEC_MMA_PMXVF64GERPN "pmxvf64gerpn")
(UNSPEC_MMA_PMXVF64GERNP "pmxvf64gernp")
(UNSPEC_MMA_PMXVF64GERNN "pmxvf64gernn")])
+(define_int_attr apvi4i2_dm [(UNSPEC_MMA_PMXVF64GERPP "pmdmxvf64gerpp")
+ (UNSPEC_MMA_PMXVF64GERPN "pmdmxvf64gerpn")
+ (UNSPEC_MMA_PMXVF64GERNP "pmdmxvf64gernp")
+ (UNSPEC_MMA_PMXVF64GERNN "pmdmxvf64gernn")])
+
(define_int_attr vvi4i4i4 [(UNSPEC_MMA_PMXVI8GER4 "pmxvi8ger4")])
+(define_int_attr vvi4i4i4_dm [(UNSPEC_MMA_PMXVI8GER4 "pmdmxvi8ger4")])
+
(define_int_attr avvi4i4i4 [(UNSPEC_MMA_PMXVI8GER4PP "pmxvi8ger4pp")
(UNSPEC_MMA_PMXVI8GER4SPP "pmxvi8ger4spp")])
+(define_int_attr avvi4i4i4_dm [(UNSPEC_MMA_PMXVI8GER4PP "pmdmxvi8ger4pp")
+ (UNSPEC_MMA_PMXVI8GER4SPP "pmdmxvi8ger4spp")])
;; Vector pair support. OOmode can only live in VSRs.
(define_expand "movoo"
@@ -666,7 +704,10 @@ (define_insn "mma_<vv>"
(match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")]
MMA_VV))]
"TARGET_MMA"
- "<vv> %A0,%x1,%x2"
+ "@
+ dm<vv> %A0,%x1,%x2
+ <vv> %A0,%x1,%x2
+ <vv> %A0,%x1,%x2"
[(set_attr "type" "mma")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -687,7 +728,10 @@ (define_insn "mma_<pv>"
(match_operand:V16QI 2 "vsx_register_operand" "wa,v,?wa")]
MMA_PV))]
"TARGET_MMA"
- "<pv> %A0,%x1,%x2"
+ "@
+ dm<pv> %A0,%x1,%x2
+ <pv> %A0,%x1,%x2
+ <pv> %A0,%x1,%x2"
[(set_attr "type" "mma")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -698,7 +742,10 @@ (define_insn "mma_<apv>"
(match_operand:V16QI 3 "vsx_register_operand" "wa,v,?wa")]
MMA_APV))]
"TARGET_MMA"
- "<apv> %A0,%x2,%x3"
+ "@
+ dm<apv> %A0,%x2,%x3
+ <apv> %A0,%x2,%x3
+ <apv> %A0,%x2,%x3"
[(set_attr "type" "mma")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -711,7 +758,10 @@ (define_insn "mma_<vvi4i4i8>"
(match_operand:SI 5 "u8bit_cint_operand" "n,n,n")]
MMA_VVI4I4I8))]
"TARGET_MMA"
- "<vvi4i4i8> %A0,%x1,%x2,%3,%4,%5"
+ "@
+ dm<vvi4i4i8> %A0,%x1,%x2,%3,%4,%5
+ <vvi4i4i8> %A0,%x1,%x2,%3,%4,%5
+ <vvi4i4i8> %A0,%x1,%x2,%3,%4,%5"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -740,7 +790,10 @@ (define_insn "mma_<vvi4i4i2>"
(match_operand:SI 5 "const_0_to_3_operand" "n,n,n")]
MMA_VVI4I4I2))]
"TARGET_MMA"
- "<vvi4i4i2> %A0,%x1,%x2,%3,%4,%5"
+ "@
+ <vvi4i4i2_dm> %A0,%x1,%x2,%3,%4,%5
+ <vvi4i4i2> %A0,%x1,%x2,%3,%4,%5
+ <vvi4i4i2> %A0,%x1,%x2,%3,%4,%5"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -755,7 +808,10 @@ (define_insn "mma_<avvi4i4i2>"
(match_operand:SI 6 "const_0_to_3_operand" "n,n,n")]
MMA_AVVI4I4I2))]
"TARGET_MMA"
- "<avvi4i4i2> %A0,%x2,%x3,%4,%5,%6"
+ "@
+ <avvi4i4i2_dm> %A0,%x2,%x3,%4,%5,%6
+ <avvi4i4i2> %A0,%x2,%x3,%4,%5,%6
+ <avvi4i4i2> %A0,%x2,%x3,%4,%5,%6"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -768,7 +824,10 @@ (define_insn "mma_<vvi4i4>"
(match_operand:SI 4 "const_0_to_15_operand" "n,n,n")]
MMA_VVI4I4))]
"TARGET_MMA"
- "<vvi4i4> %A0,%x1,%x2,%3,%4"
+ "@
+ <vvi4i4_dm> %A0,%x1,%x2,%3,%4
+ <vvi4i4> %A0,%x1,%x2,%3,%4
+ <vvi4i4> %A0,%x1,%x2,%3,%4"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -782,7 +841,10 @@ (define_insn "mma_<avvi4i4>"
(match_operand:SI 5 "const_0_to_15_operand" "n,n,n")]
MMA_AVVI4I4))]
"TARGET_MMA"
- "<avvi4i4> %A0,%x2,%x3,%4,%5"
+ "@
+ <avvi4i4_dm> %A0,%x2,%x3,%4,%5
+ <avvi4i4> %A0,%x2,%x3,%4,%5
+ <avvi4i4> %A0,%x2,%x3,%4,%5"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -795,7 +857,10 @@ (define_insn "mma_<pvi4i2>"
(match_operand:SI 4 "const_0_to_3_operand" "n,n,n")]
MMA_PVI4I2))]
"TARGET_MMA"
- "<pvi4i2> %A0,%x1,%x2,%3,%4"
+ "@
+ <pvi4i2_dm> %A0,%x1,%x2,%3,%4
+ <pvi4i2> %A0,%x1,%x2,%3,%4
+ <pvi4i2> %A0,%x1,%x2,%3,%4"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -809,7 +874,10 @@ (define_insn "mma_<apvi4i2>"
(match_operand:SI 5 "const_0_to_3_operand" "n,n,n")]
MMA_APVI4I2))]
"TARGET_MMA"
- "<apvi4i2> %A0,%x2,%x3,%4,%5"
+ "@
+ <apvi4i2_dm> %A0,%x2,%x3,%4,%5
+ <apvi4i2> %A0,%x2,%x3,%4,%5
+ <apvi4i2> %A0,%x2,%x3,%4,%5"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -823,7 +891,10 @@ (define_insn "mma_<vvi4i4i4>"
(match_operand:SI 5 "const_0_to_15_operand" "n,n,n")]
MMA_VVI4I4I4))]
"TARGET_MMA"
- "<vvi4i4i4> %A0,%x1,%x2,%3,%4,%5"
+ "@
+ <vvi4i4i4_dm> %A0,%x1,%x2,%3,%4,%5
+ <vvi4i4i4> %A0,%x1,%x2,%3,%4,%5
+ <vvi4i4i4> %A0,%x1,%x2,%3,%4,%5"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
@@ -838,7 +909,10 @@ (define_insn "mma_<avvi4i4i4>"
(match_operand:SI 6 "const_0_to_15_operand" "n,n,n")]
MMA_AVVI4I4I4))]
"TARGET_MMA"
- "<avvi4i4i4> %A0,%x2,%x3,%4,%5,%6"
+ "@
+ <avvi4i4i4_dm> %A0,%x2,%x3,%4,%5,%6
+ <avvi4i4i4> %A0,%x2,%x3,%4,%5,%6
+ <avvi4i4i4> %A0,%x2,%x3,%4,%5,%6"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
diff --git a/gcc/testsuite/gcc.target/powerpc/dm-double-test.c b/gcc/testsuite/gcc.target/powerpc/dm-double-test.c
new file mode 100644
index 00000000000..66c19779585
--- /dev/null
+++ b/gcc/testsuite/gcc.target/powerpc/dm-double-test.c
@@ -0,0 +1,194 @@
+/* Test derived from mma-double-1.c, modified for dense math. */
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_dense_math_ok } */
+/* { dg-options "-mdejagnu-cpu=future -O2" } */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <altivec.h>
+
+typedef unsigned char vec_t __attribute__ ((vector_size (16)));
+typedef double v4sf_t __attribute__ ((vector_size (16)));
+#define SAVE_ACC(ACC, ldc, J) \
+ __builtin_mma_disassemble_acc (result, ACC); \
+ rowC = (v4sf_t *) &CO[0*ldc+J]; \
+ rowC[0] += result[0]; \
+ rowC = (v4sf_t *) &CO[1*ldc+J]; \
+ rowC[0] += result[1]; \
+ rowC = (v4sf_t *) &CO[2*ldc+J]; \
+ rowC[0] += result[2]; \
+ rowC = (v4sf_t *) &CO[3*ldc+J]; \
+ rowC[0] += result[3];
+
+void
+DM (int m, int n, int k, double *A, double *B, double *C)
+{
+ __vector_quad acc0, acc1, acc2, acc3, acc4, acc5, acc6, acc7;
+ v4sf_t result[4];
+ v4sf_t *rowC;
+ for (int l = 0; l < n; l += 4)
+ {
+ double *CO;
+ double *AO;
+ AO = A;
+ CO = C;
+ C += m * 4;
+ for (int j = 0; j < m; j += 16)
+ {
+ double *BO = B;
+ __builtin_mma_xxsetaccz (&acc0);
+ __builtin_mma_xxsetaccz (&acc1);
+ __builtin_mma_xxsetaccz (&acc2);
+ __builtin_mma_xxsetaccz (&acc3);
+ __builtin_mma_xxsetaccz (&acc4);
+ __builtin_mma_xxsetaccz (&acc5);
+ __builtin_mma_xxsetaccz (&acc6);
+ __builtin_mma_xxsetaccz (&acc7);
+ unsigned long i;
+
+ for (i = 0; i < k; i++)
+ {
+ vec_t *rowA = (vec_t *) & AO[i * 16];
+ __vector_pair rowB;
+ vec_t *rb = (vec_t *) & BO[i * 4];
+ __builtin_mma_assemble_pair (&rowB, rb[1], rb[0]);
+ __builtin_mma_xvf64gerpp (&acc0, rowB, rowA[0]);
+ __builtin_mma_xvf64gerpp (&acc1, rowB, rowA[1]);
+ __builtin_mma_xvf64gerpp (&acc2, rowB, rowA[2]);
+ __builtin_mma_xvf64gerpp (&acc3, rowB, rowA[3]);
+ __builtin_mma_xvf64gerpp (&acc4, rowB, rowA[4]);
+ __builtin_mma_xvf64gerpp (&acc5, rowB, rowA[5]);
+ __builtin_mma_xvf64gerpp (&acc6, rowB, rowA[6]);
+ __builtin_mma_xvf64gerpp (&acc7, rowB, rowA[7]);
+ }
+ SAVE_ACC (&acc0, m, 0);
+ SAVE_ACC (&acc2, m, 4);
+ SAVE_ACC (&acc1, m, 2);
+ SAVE_ACC (&acc3, m, 6);
+ SAVE_ACC (&acc4, m, 8);
+ SAVE_ACC (&acc6, m, 12);
+ SAVE_ACC (&acc5, m, 10);
+ SAVE_ACC (&acc7, m, 14);
+ AO += k * 16;
+ BO += k * 4;
+ CO += 16;
+ }
+ B += k * 4;
+ }
+}
+
+void
+init (double *matrix, int row, int column)
+{
+ for (int j = 0; j < column; j++)
+ {
+ for (int i = 0; i < row; i++)
+ {
+ matrix[j * row + i] = (i * 16 + 2 + j) / 0.123;
+ }
+ }
+}
+
+void
+init0 (double *matrix, double *matrix1, int row, int column)
+{
+ for (int j = 0; j < column; j++)
+ for (int i = 0; i < row; i++)
+ matrix[j * row + i] = matrix1[j * row + i] = 0;
+}
+
+
+void
+print (const char *name, const double *matrix, int row, int column)
+{
+ printf ("Matrix %s has %d rows and %d columns:\n", name, row, column);
+ for (int i = 0; i < row; i++)
+ {
+ for (int j = 0; j < column; j++)
+ {
+ printf ("%f ", matrix[j * row + i]);
+ }
+ printf ("\n");
+ }
+ printf ("\n");
+}
+
+int
+main (int argc, char *argv[])
+{
+ int rowsA, colsB, common;
+ int i, j, k;
+ int ret = 0;
+
+ for (int t = 16; t <= 128; t += 16)
+ {
+ for (int t1 = 4; t1 <= 16; t1 += 4)
+ {
+ rowsA = t;
+ colsB = t1;
+ common = 1;
+ /* printf ("Running test for rows = %d,cols = %d\n", t, t1); */
+ double A[rowsA * common];
+ double B[common * colsB];
+ double C[rowsA * colsB];
+ double D[rowsA * colsB];
+
+
+ init (A, rowsA, common);
+ init (B, common, colsB);
+ init0 (C, D, rowsA, colsB);
+ DM (rowsA, colsB, common, A, B, C);
+
+ for (i = 0; i < colsB; i++)
+ {
+ for (j = 0; j < rowsA; j++)
+ {
+ D[i * rowsA + j] = 0;
+ for (k = 0; k < common; k++)
+ {
+ D[i * rowsA + j] +=
+ A[k * rowsA + j] * B[k + common * i];
+ }
+ }
+ }
+ for (i = 0; i < colsB; i++)
+ {
+ for (j = 0; j < rowsA; j++)
+ {
+ for (k = 0; k < common; k++)
+ {
+ if (D[i * rowsA + j] != C[i * rowsA + j])
+ {
+ printf ("Error %d,%d,%d\n",i,j,k);
+ ret++;
+ }
+ }
+ }
+ }
+ if (ret)
+ {
+ print ("A", A, rowsA, common);
+ print ("B", B, common, colsB);
+ print ("C", C, rowsA, colsB);
+ print ("D", D, rowsA, colsB);
+ }
+ }
+ }
+
+#ifdef VERBOSE
+ if (ret)
+ printf ("DM double test fail: %d errors\n",ret);
+ else
+ printf ("DM double test success: 0 DM errors\n");
+#else
+ if (ret)
+ abort();
+#endif
+
+ return ret;
+}
+
+/* { dg-final { scan-assembler {\mdmsetdmrz\M} } } */
+/* { dg-final { scan-assembler {\mdmxvf64gerpp\M} } } */
+/* { dg-final { scan-assembler {\mdmxxextfdmr512\M} } } */
+
diff --git a/gcc/testsuite/lib/target-supports.exp b/gcc/testsuite/lib/target-supports.exp
index f0b692a2e19..7aa0ba9a1d3 100644
--- a/gcc/testsuite/lib/target-supports.exp
+++ b/gcc/testsuite/lib/target-supports.exp
@@ -6938,6 +6938,25 @@ proc check_effective_target_power10_ok { } {
}
}
+# Return 1 if this is a PowerPC target supporting -mcpu=future or -mdense-math
+# which enables the dense math operations.
+proc check_effective_target_powerpc_dense_math_ok { } {
+ return [check_no_compiler_messages_nocache powerpc_dense_math_ok assembly {
+ __vector_quad vq;
+ void test (void)
+ {
+ #ifndef __PPC_DMR__
+ #error "target does not have dense math support."
+ #else
+ /* Make sure we have dense math support. */
+ __vector_quad dmr;
+ __asm__ ("dmsetaccz %A0" : "=wD" (dmr));
+ vq = dmr;
+ #endif
+ }
+ } "-mcpu=future"]
+}
+
# Return 1 if this is a PowerPC target supporting -mfloat128 via either
# software emulation on power7/power8 systems or hardware support on power9.
--
2.41.0
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers.
2023-10-18 23:55 [PATCH 0/6] PowerPC Future patches Michael Meissner
` (4 preceding siblings ...)
2023-10-19 0:04 ` [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations Michael Meissner
@ 2023-10-19 0:06 ` Michael Meissner
2023-10-25 20:21 ` Ping: " Michael Meissner
2023-11-03 7:53 ` Ping #2: " Michael Meissner
5 siblings, 2 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-19 0:06 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
This patch is a prelimianry patch to add the full 1,024 bit dense math register
(DMRs) for -mcpu=future. The MMA 512-bit accumulators map onto the top of the
DMR register.
This patch only adds the new 1,024 bit register support. It does not add
support for any instructions that need 1,024 bit registers instead of 512 bit
registers.
I used the new mode 'TDOmode' to be the opaque mode used for 1,204 bit
registers. The 'wD' constraint added in previous patches is used for these
registers. I added support to do load and store of DMRs via the VSX registers,
since there are no load/store dense math instructions. I added the new keyword
'__dmr' to create 1,024 bit types that can be loaded into DMRs. At present, I
don't have aliases for __dmr512 and __dmr1024 that we've discussed internally.
The patches have been tested on both little and big endian systems. Can I check
it into the master branch?
2023-10-18 Michael Meissner <meissner@linux.ibm.com>
gcc/
* config/rs6000/mma.md (UNSPEC_DM_INSERT512_UPPER): New unspec.
(UNSPEC_DM_INSERT512_LOWER): Likewise.
(UNSPEC_DM_EXTRACT512): Likewise.
(UNSPEC_DMR_RELOAD_FROM_MEMORY): Likewise.
(UNSPEC_DMR_RELOAD_TO_MEMORY): Likewise.
(movtdo): New define_expand and define_insn_and_split to implement 1,024
bit DMR registers.
(movtdo_insert512_upper): New insn.
(movtdo_insert512_lower): Likewise.
(movtdo_extract512): Likewise.
(reload_dmr_from_memory): Likewise.
(reload_dmr_to_memory): Likewise.
* config/rs6000/rs6000-builtin.cc (rs6000_type_string): Add DMR
support.
(rs6000_init_builtins): Add support for __dmr keyword.
* config/rs6000/rs6000-call.cc (rs6000_return_in_memory): Add support
for TDOmode.
(rs6000_function_arg): Likewise.
* config/rs6000/rs6000-modes.def (TDOmode): New mode.
* config/rs6000/rs6000.cc (rs6000_hard_regno_nregs_internal): Add
support for TDOmode.
(rs6000_hard_regno_mode_ok_uncached): Likewise.
(rs6000_hard_regno_mode_ok): Likewise.
(rs6000_modes_tieable_p): Likewise.
(rs6000_debug_reg_global): Likewise.
(rs6000_setup_reg_addr_masks): Likewise.
(rs6000_init_hard_regno_mode_ok): Add support for TDOmode. Setup reload
hooks for DMR mode.
(reg_offset_addressing_ok_p): Add support for TDOmode.
(rs6000_emit_move): Likewise.
(rs6000_secondary_reload_simple_move): Likewise.
(rs6000_secondary_reload_class): Likewise.
(rs6000_mangle_type): Add mangling for __dmr type.
(rs6000_dmr_register_move_cost): Add support for TDOmode.
(rs6000_split_multireg_move): Likewise.
(rs6000_invalid_conversion): Likewise.
* config/rs6000/rs6000.h (VECTOR_ALIGNMENT_P): Add TDOmode.
(enum rs6000_builtin_type_index): Add DMR type nodes.
(dmr_type_node): Likewise.
(ptr_dmr_type_node): Likewise.
gcc/testsuite/
* gcc.target/powerpc/dm-1024bit.c: New test.
---
gcc/config/rs6000/mma.md | 152 ++++++++++++++++++
gcc/config/rs6000/rs6000-builtin.cc | 13 ++
gcc/config/rs6000/rs6000-call.cc | 13 +-
gcc/config/rs6000/rs6000-modes.def | 4 +
gcc/config/rs6000/rs6000.cc | 135 ++++++++++++----
gcc/config/rs6000/rs6000.h | 7 +-
gcc/testsuite/gcc.target/powerpc/dm-1024bit.c | 63 ++++++++
7 files changed, 351 insertions(+), 36 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/powerpc/dm-1024bit.c
diff --git a/gcc/config/rs6000/mma.md b/gcc/config/rs6000/mma.md
index cae407bc37c..0a89db8af99 100644
--- a/gcc/config/rs6000/mma.md
+++ b/gcc/config/rs6000/mma.md
@@ -93,6 +93,11 @@ (define_c_enum "unspec"
UNSPEC_MMA_XXMTACC
UNSPEC_MMA_VECTOR_PAIR_MEMORY
UNSPEC_DM_ASSEMBLE_ACC
+ UNSPEC_DM_INSERT512_UPPER
+ UNSPEC_DM_INSERT512_LOWER
+ UNSPEC_DM_EXTRACT512
+ UNSPEC_DMR_RELOAD_FROM_MEMORY
+ UNSPEC_DMR_RELOAD_TO_MEMORY
])
(define_c_enum "unspecv"
@@ -916,3 +921,150 @@ (define_insn "mma_<avvi4i4i4>"
[(set_attr "type" "mma")
(set_attr "prefixed" "yes")
(set_attr "isa" "dm,not_dm,not_dm")])
+
+\f
+;; TDOmode (i.e. __dmr).
+(define_expand "movtdo"
+ [(set (match_operand:TDO 0 "nonimmediate_operand")
+ (match_operand:TDO 1 "input_operand"))]
+ "TARGET_DENSE_MATH"
+{
+ rs6000_emit_move (operands[0], operands[1], TDOmode);
+ DONE;
+})
+
+(define_insn_and_split "*movtdo"
+ [(set (match_operand:TDO 0 "nonimmediate_operand" "=wa,m,wa,wD,wD,wa")
+ (match_operand:TDO 1 "input_operand" "m,wa,wa,wa,wD,wD"))]
+ "TARGET_DENSE_MATH
+ && (gpc_reg_operand (operands[0], TDOmode)
+ || gpc_reg_operand (operands[1], TDOmode))"
+ "@
+ #
+ #
+ #
+ #
+ dmmr %0,%1
+ #"
+ "&& reload_completed
+ && (!dmr_operand (operands[0], TDOmode) || !dmr_operand (operands[1], TDOmode))"
+ [(const_int 0)]
+{
+ rtx op0 = operands[0];
+ rtx op1 = operands[1];
+
+ if (REG_P (op0) && REG_P (op1))
+ {
+ int regno0 = REGNO (op0);
+ int regno1 = REGNO (op1);
+
+ if (DMR_REGNO_P (regno0) && VSX_REGNO_P (regno1))
+ {
+ rtx op1_upper = gen_rtx_REG (XOmode, regno1);
+ rtx op1_lower = gen_rtx_REG (XOmode, regno1 + 4);
+ emit_insn (gen_movtdo_insert512_upper (op0, op1_upper));
+ emit_insn (gen_movtdo_insert512_lower (op0, op0, op1_lower));
+ DONE;
+ }
+
+ else if (VSX_REGNO_P (regno0) && DMR_REGNO_P (regno1))
+ {
+ rtx op0_upper = gen_rtx_REG (XOmode, regno0);
+ rtx op0_lower = gen_rtx_REG (XOmode, regno0 + 4);
+ emit_insn (gen_movtdo_extract512 (op0_upper, op1, const0_rtx));
+ emit_insn (gen_movtdo_extract512 (op0_lower, op1, const1_rtx));
+ DONE;
+ }
+ }
+
+ rs6000_split_multireg_move (operands[0], operands[1]);
+ DONE;
+}
+ [(set_attr "type" "vecload,vecstore,vecmove,vecmove,vecmove,vecmove")
+ (set_attr "length" "*,*,32,8,*,8")
+ (set_attr "max_prefixed_insns" "4,4,*,*,*,*")])
+
+;; Move from VSX registers to DMR registers via two insert 512 bit
+;; instructions.
+(define_insn "movtdo_insert512_upper"
+ [(set (match_operand:TDO 0 "dmr_operand" "=wD")
+ (unspec:TDO [(match_operand:XO 1 "vsx_register_operand" "wa")]
+ UNSPEC_DM_INSERT512_UPPER))]
+ "TARGET_DENSE_MATH"
+ "dmxxinstdmr512 %0,%1,%Y1,0"
+ [(set_attr "type" "mma")])
+
+(define_insn "movtdo_insert512_lower"
+ [(set (match_operand:TDO 0 "dmr_operand" "=wD")
+ (unspec:TDO [(match_operand:TDO 1 "dmr_operand" "0")
+ (match_operand:XO 2 "vsx_register_operand" "wa")]
+ UNSPEC_DM_INSERT512_LOWER))]
+ "TARGET_DENSE_MATH"
+ "dmxxinstdmr512 %0,%2,%Y2,1"
+ [(set_attr "type" "mma")])
+
+;; Move from DMR registers to VSX registers via two extract 512 bit
+;; instructions.
+(define_insn "movtdo_extract512"
+ [(set (match_operand:XO 0 "vsx_register_operand" "=wa")
+ (unspec:XO [(match_operand:TDO 1 "dmr_operand" "wD")
+ (match_operand 2 "const_0_to_1_operand" "n")]
+ UNSPEC_DM_EXTRACT512))]
+ "TARGET_DENSE_MATH"
+ "dmxxextfdmr512 %0,%Y0,%1,%2"
+ [(set_attr "type" "mma")])
+
+;; Reload DMR registers from memory
+(define_insn_and_split "reload_dmr_from_memory"
+ [(set (match_operand:TDO 0 "dmr_operand" "=wD")
+ (unspec:TDO [(match_operand:TDO 1 "memory_operand" "m")]
+ UNSPEC_DMR_RELOAD_FROM_MEMORY))
+ (clobber (match_operand:XO 2 "vsx_register_operand" "=wa"))]
+ "TARGET_DENSE_MATH"
+ "#"
+ "&& reload_completed"
+ [(const_int 0)]
+{
+ rtx dest = operands[0];
+ rtx src = operands[1];
+ rtx tmp = operands[2];
+ rtx mem_upper = adjust_address (src, XOmode, BYTES_BIG_ENDIAN ? 0 : 32);
+ rtx mem_lower = adjust_address (src, XOmode, BYTES_BIG_ENDIAN ? 32 : 0);
+
+ emit_move_insn (tmp, mem_upper);
+ emit_insn (gen_movtdo_insert512_upper (dest, tmp));
+
+ emit_move_insn (tmp, mem_lower);
+ emit_insn (gen_movtdo_insert512_lower (dest, dest, tmp));
+ DONE;
+}
+ [(set_attr "length" "16")
+ (set_attr "max_prefixed_insns" "2")
+ (set_attr "type" "vecload")])
+
+;; Reload dense math registers to memory
+(define_insn_and_split "reload_dmr_to_memory"
+ [(set (match_operand:TDO 0 "memory_operand" "=m")
+ (unspec:TDO [(match_operand:TDO 1 "dmr_operand" "wD")]
+ UNSPEC_DMR_RELOAD_TO_MEMORY))
+ (clobber (match_operand:XO 2 "vsx_register_operand" "=wa"))]
+ "TARGET_DENSE_MATH"
+ "#"
+ "&& reload_completed"
+ [(const_int 0)]
+{
+ rtx dest = operands[0];
+ rtx src = operands[1];
+ rtx tmp = operands[2];
+ rtx mem_upper = adjust_address (dest, XOmode, BYTES_BIG_ENDIAN ? 0 : 32);
+ rtx mem_lower = adjust_address (dest, XOmode, BYTES_BIG_ENDIAN ? 32 : 0);
+
+ emit_insn (gen_movtdo_extract512 (tmp, src, const0_rtx));
+ emit_move_insn (mem_upper, tmp);
+
+ emit_insn (gen_movtdo_extract512 (tmp, src, const1_rtx));
+ emit_move_insn (mem_lower, tmp);
+ DONE;
+}
+ [(set_attr "length" "16")
+ (set_attr "max_prefixed_insns" "2")])
diff --git a/gcc/config/rs6000/rs6000-builtin.cc b/gcc/config/rs6000/rs6000-builtin.cc
index f44427d116e..61285b8c2f0 100644
--- a/gcc/config/rs6000/rs6000-builtin.cc
+++ b/gcc/config/rs6000/rs6000-builtin.cc
@@ -495,6 +495,8 @@ const char *rs6000_type_string (tree type_node)
return "__vector_pair";
else if (type_node == vector_quad_type_node)
return "__vector_quad";
+ else if (type_node == dmr_type_node)
+ return "__dmr";
return "unknown";
}
@@ -781,6 +783,17 @@ rs6000_init_builtins (void)
t = build_qualified_type (vector_quad_type_node, TYPE_QUAL_CONST);
ptr_vector_quad_type_node = build_pointer_type (t);
+ dmr_type_node = make_node (OPAQUE_TYPE);
+ SET_TYPE_MODE (dmr_type_node, TDOmode);
+ TYPE_SIZE (dmr_type_node) = bitsize_int (GET_MODE_BITSIZE (TDOmode));
+ TYPE_PRECISION (dmr_type_node) = GET_MODE_BITSIZE (TDOmode);
+ TYPE_SIZE_UNIT (dmr_type_node) = size_int (GET_MODE_SIZE (TDOmode));
+ SET_TYPE_ALIGN (dmr_type_node, 512);
+ TYPE_USER_ALIGN (dmr_type_node) = 0;
+ lang_hooks.types.register_builtin_type (dmr_type_node, "__dmr");
+ t = build_qualified_type (dmr_type_node, TYPE_QUAL_CONST);
+ ptr_dmr_type_node = build_pointer_type (t);
+
tdecl = add_builtin_type ("__bool char", bool_char_type_node);
TYPE_NAME (bool_char_type_node) = tdecl;
diff --git a/gcc/config/rs6000/rs6000-call.cc b/gcc/config/rs6000/rs6000-call.cc
index 5384c10b986..34f1680d946 100644
--- a/gcc/config/rs6000/rs6000-call.cc
+++ b/gcc/config/rs6000/rs6000-call.cc
@@ -437,7 +437,8 @@ rs6000_return_in_memory (const_tree type, const_tree fntype ATTRIBUTE_UNUSED)
if (cfun
&& !cfun->machine->mma_return_type_error
&& TREE_TYPE (cfun->decl) == fntype
- && (TYPE_MODE (type) == OOmode || TYPE_MODE (type) == XOmode))
+ && (TYPE_MODE (type) == OOmode || TYPE_MODE (type) == XOmode
+ || TYPE_MODE (type) == TDOmode))
{
/* Record we have now handled function CFUN, so the next time we
are called, we do not re-report the same error. */
@@ -1641,6 +1642,16 @@ rs6000_function_arg (cumulative_args_t cum_v, const function_arg_info &arg)
return NULL_RTX;
}
+ if (mode == TDOmode)
+ {
+ if (TYPE_CANONICAL (type) != NULL_TREE)
+ type = TYPE_CANONICAL (type);
+ error ("invalid use of dense math operand of type %qs as a function "
+ "parameter",
+ IDENTIFIER_POINTER (DECL_NAME (TYPE_NAME (type))));
+ return NULL_RTX;
+ }
+
/* Return a marker to indicate whether CR1 needs to set or clear the
bit that V.4 uses to say fp args were passed in registers.
Assume that we don't need the marker for software floating point,
diff --git a/gcc/config/rs6000/rs6000-modes.def b/gcc/config/rs6000/rs6000-modes.def
index 73dfde5c6e7..d36bde9d2a0 100644
--- a/gcc/config/rs6000/rs6000-modes.def
+++ b/gcc/config/rs6000/rs6000-modes.def
@@ -86,3 +86,7 @@ PARTIAL_INT_MODE (TI, 128, PTI);
/* Modes used by __vector_pair and __vector_quad. */
OPAQUE_MODE (OO, 32);
OPAQUE_MODE (XO, 64);
+
+/* Modes used by __dmr. */
+OPAQUE_MODE (TDO, 128);
+
diff --git a/gcc/config/rs6000/rs6000.cc b/gcc/config/rs6000/rs6000.cc
index 7d8b9ec442b..c6e90d52b29 100644
--- a/gcc/config/rs6000/rs6000.cc
+++ b/gcc/config/rs6000/rs6000.cc
@@ -1837,7 +1837,9 @@ rs6000_hard_regno_nregs_internal (int regno, machine_mode mode)
128-bit floating point that can go in vector registers, which has VSX
memory addressing. */
if (FP_REGNO_P (regno))
- reg_size = (VECTOR_MEM_VSX_P (mode) || VECTOR_ALIGNMENT_P (mode)
+ reg_size = (VECTOR_MEM_VSX_P (mode)
+ || VECTOR_ALIGNMENT_P (mode)
+ || mode == TDOmode
? UNITS_PER_VSX_WORD
: UNITS_PER_FP_WORD);
@@ -1871,9 +1873,9 @@ rs6000_hard_regno_mode_ok_uncached (int regno, machine_mode mode)
/* On ISA 3.1 (power10), MMA accumulator modes need FPR registers divisible
by 4.
- If dense math is enabled, allow all VSX registers plus the DMR registers.
- We need to make sure we don't cross between the boundary of FPRs and
- traditional Altiviec registers. */
+ If dense math is enabled, allow all VSX registers plus the dense math
+ registers. We need to make sure we don't cross between the boundary of
+ FPRs and traditional Altiviec registers. */
if (mode == XOmode)
{
if (TARGET_MMA && !TARGET_DENSE_MATH)
@@ -1895,7 +1897,27 @@ rs6000_hard_regno_mode_ok_uncached (int regno, machine_mode mode)
return 0;
}
- /* No other types other than XOmode can go in DMRs. */
+ /* Dense math register modes need DMR registers or VSX registers divisible by
+ 2. We need to make sure we don't cross between the boundary of FPRs and
+ traditional Altiviec registers. */
+ if (mode == TDOmode)
+ {
+ if (!TARGET_DENSE_MATH)
+ return 0;
+
+ if (DMR_REGNO_P (regno))
+ return 1;
+
+ if (FP_REGNO_P (regno))
+ return ((regno & 1) == 0 && regno <= LAST_FPR_REGNO - 7);
+
+ if (ALTIVEC_REGNO_P (regno))
+ return ((regno & 1) == 0 && regno <= LAST_ALTIVEC_REGNO - 7);
+
+ return 0;
+ }
+
+ /* No other types other than XOmode or TDOmode can go in DMRs. */
if (DMR_REGNO_P (regno))
return 0;
@@ -2003,9 +2025,11 @@ rs6000_hard_regno_mode_ok (unsigned int regno, machine_mode mode)
GPR registers, and TImode can go in any GPR as well as VSX registers (PR
57744).
- Similarly, don't allow OOmode (vector pair, restricted to even VSX
- registers) or XOmode (vector quad, restricted to FPR registers divisible
- by 4) to tie with other modes.
+ Similarly, don't allow OOmode (vector pair), XOmode (vector quad), or
+ TDOmode (dmr register) to pair with anything else. Vector pairs are
+ restricted to even/odd VSX registers. Without dense math, vector quads are
+ limited to FPR registers divisible by 4. With dense math, vector quads are
+ limited to even VSX registers or DMR registers.
Altivec/VSX vector tests were moved ahead of scalar float mode, so that IEEE
128-bit floating point on VSX systems ties with other vectors. */
@@ -2014,7 +2038,8 @@ static bool
rs6000_modes_tieable_p (machine_mode mode1, machine_mode mode2)
{
if (mode1 == PTImode || mode1 == OOmode || mode1 == XOmode
- || mode2 == PTImode || mode2 == OOmode || mode2 == XOmode)
+ || mode1 == TDOmode || mode2 == PTImode || mode2 == OOmode
+ || mode2 == XOmode || mode2 == TDOmode)
return mode1 == mode2;
if (ALTIVEC_OR_VSX_VECTOR_MODE (mode1))
@@ -2305,6 +2330,7 @@ rs6000_debug_reg_global (void)
V4DFmode,
OOmode,
XOmode,
+ TDOmode,
CCmode,
CCUNSmode,
CCEQmode,
@@ -2670,7 +2696,7 @@ rs6000_setup_reg_addr_masks (void)
/* Special case DMR registers. */
if (rc == RELOAD_REG_DMR)
{
- if (TARGET_DENSE_MATH && m2 == XOmode)
+ if (TARGET_DENSE_MATH && (m2 == XOmode || m2 == TDOmode))
{
addr_mask = RELOAD_REG_VALID;
reg_addr[m].addr_mask[rc] = addr_mask;
@@ -2777,12 +2803,14 @@ rs6000_setup_reg_addr_masks (void)
/* Vector pairs can do both indexed and offset loads if the
instructions are enabled, otherwise they can only do offset loads
- since it will be broken into two vector moves. Vector quads can
- only do offset loads. If the user restricted generation of either
- of the LXVP or STXVP instructions, do not allow indexed mode so
- that we can split the load/store. */
+ since it will be broken into two vector moves. If the user
+ restricted generation of either of the LXVP or STXVP instructions,
+ do not allow indexed mode so that we can split the load/store.
+
+ Vector quads and dense math 1,024 bit registers can only do offset
+ loads. */
else if ((addr_mask != 0) && TARGET_MMA
- && (m2 == OOmode || m2 == XOmode))
+ && (m2 == OOmode || m2 == XOmode || m2 == TDOmode))
{
addr_mask |= RELOAD_REG_OFFSET;
if (rc == RELOAD_REG_FPR || rc == RELOAD_REG_VMX)
@@ -3012,6 +3040,14 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p)
rs6000_vector_align[XOmode] = 512;
}
+ /* Add support for 1,024 bit DMR registers. */
+ if (TARGET_DENSE_MATH)
+ {
+ rs6000_vector_unit[TDOmode] = VECTOR_NONE;
+ rs6000_vector_mem[TDOmode] = VECTOR_VSX;
+ rs6000_vector_align[TDOmode] = 512;
+ }
+
/* Register class constraints for the constraints that depend on compile
switches. When the VSX code was added, different constraints were added
based on the type (DFmode, V2DFmode, V4SFmode). For the vector types, all
@@ -3225,6 +3261,12 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p)
}
}
+ if (TARGET_DENSE_MATH)
+ {
+ reg_addr[TDOmode].reload_load = CODE_FOR_reload_dmr_from_memory;
+ reg_addr[TDOmode].reload_store = CODE_FOR_reload_dmr_to_memory;
+ }
+
/* Precalculate HARD_REGNO_NREGS. */
for (r = 0; HARD_REGISTER_NUM_P (r); ++r)
for (m = 0; m < NUM_MACHINE_MODES; ++m)
@@ -8802,12 +8844,15 @@ reg_offset_addressing_ok_p (machine_mode mode)
return mode_supports_dq_form (mode);
break;
- /* The vector pair/quad types support offset addressing if the
- underlying vectors support offset addressing. */
+ /* The vector pair/quad types and the dense math types support offset
+ addressing if the underlying vectors support offset addressing. */
case E_OOmode:
case E_XOmode:
return TARGET_MMA;
+ case E_TDOmode:
+ return TARGET_DENSE_MATH;
+
case E_SDmode:
/* If we can do direct load/stores of SDmode, restrict it to reg+reg
addressing for the LFIWZX and STFIWX instructions. */
@@ -11325,6 +11370,12 @@ rs6000_emit_move (rtx dest, rtx source, machine_mode mode)
(mode == OOmode) ? "__vector_pair" : "__vector_quad");
break;
+ case E_TDOmode:
+ if (CONST_INT_P (operands[1]))
+ error ("%qs is an opaque type, and you cannot set it to constants",
+ "__dmr");
+ break;
+
case E_SImode:
case E_DImode:
/* Use default pattern for address of ELF small data */
@@ -12788,7 +12839,7 @@ rs6000_secondary_reload_simple_move (enum rs6000_reg_type to_type,
/* We can transfer between VSX registers and DMR registers without needing
extra registers. */
- if (TARGET_DENSE_MATH && mode == XOmode
+ if (TARGET_DENSE_MATH && (mode == XOmode || mode == TDOmode)
&& ((to_type == DMR_REG_TYPE && from_type == VSX_REG_TYPE)
|| (to_type == VSX_REG_TYPE && from_type == DMR_REG_TYPE)))
return true;
@@ -13589,6 +13640,9 @@ rs6000_preferred_reload_class (rtx x, enum reg_class rclass)
if (mode == XOmode)
return TARGET_DENSE_MATH ? VSX_REGS : FLOAT_REGS;
+ if (mode == TDOmode)
+ return VSX_REGS;
+
if (GET_MODE_CLASS (mode) == MODE_INT)
return GENERAL_REGS;
}
@@ -13712,8 +13766,9 @@ rs6000_secondary_reload_class (enum reg_class rclass, machine_mode mode,
else
regno = -1;
- /* DMR registers don't have loads or stores. We have to go through the VSX
- registers to load XOmode (vector quad). */
+ /* Dense math registers don't have loads or stores. We have to go through
+ the VSX registers to load XOmode (vector quad) and TDOmode (dmr 1024
+ bit). */
if (TARGET_DENSE_MATH && rclass == DM_REGS)
return VSX_REGS;
@@ -20789,6 +20844,8 @@ rs6000_mangle_type (const_tree type)
return "u13__vector_pair";
if (type == vector_quad_type_node)
return "u13__vector_quad";
+ if (type == dmr_type_node)
+ return "u5__dmr";
/* For all other types, use the default mangling. */
return NULL;
@@ -22913,6 +22970,10 @@ rs6000_dmr_register_move_cost (machine_mode mode, reg_class_t rclass)
if (mode == XOmode)
return reg_move_base;
+ /* __dmr (i.e. TDOmode) is transferred in 2 instructions. */
+ else if (mode == TDOmode)
+ return reg_move_base * 2;
+
else
return reg_move_base * 2 * hard_regno_nregs (FIRST_DMR_REGNO, mode);
}
@@ -27606,9 +27667,10 @@ rs6000_split_multireg_move (rtx dst, rtx src)
mode = GET_MODE (dst);
nregs = hard_regno_nregs (reg, mode);
- /* If we have a vector quad register for MMA, and this is a load or store,
- see if we can use vector paired load/stores. */
- if (mode == XOmode && TARGET_MMA
+ /* If we have a vector quad register for MMA or DMR register for dense math,
+ and this is a load or store, see if we can use vector paired
+ load/stores. */
+ if ((mode == XOmode || mode == TDOmode) && TARGET_MMA
&& (MEM_P (dst) || MEM_P (src)))
{
reg_mode = OOmode;
@@ -27616,7 +27678,7 @@ rs6000_split_multireg_move (rtx dst, rtx src)
}
/* If we have a vector pair/quad mode, split it into two/four separate
vectors. */
- else if (mode == OOmode || mode == XOmode)
+ else if (mode == OOmode || mode == XOmode || mode == TDOmode)
reg_mode = V1TImode;
else if (FP_REGNO_P (reg))
reg_mode = DECIMAL_FLOAT_MODE_P (mode) ? DDmode :
@@ -27662,13 +27724,13 @@ rs6000_split_multireg_move (rtx dst, rtx src)
return;
}
- /* The __vector_pair and __vector_quad modes are multi-register
- modes, so if we have to load or store the registers, we have to be
- careful to properly swap them if we're in little endian mode
- below. This means the last register gets the first memory
- location. We also need to be careful of using the right register
- numbers if we are splitting XO to OO. */
- if (mode == OOmode || mode == XOmode)
+ /* The __vector_pair, __vector_quad, and __dmr modes are multi-register
+ modes, so if we have to load or store the registers, we have to be careful
+ to properly swap them if we're in little endian mode below. This means
+ the last register gets the first memory location. We also need to be
+ careful of using the right register numbers if we are splitting XO to
+ OO. */
+ if (mode == OOmode || mode == XOmode || mode == TDOmode)
{
nregs = hard_regno_nregs (reg, mode);
int reg_mode_nregs = hard_regno_nregs (reg, reg_mode);
@@ -27805,7 +27867,7 @@ rs6000_split_multireg_move (rtx dst, rtx src)
overlap. */
int i;
/* XO/OO are opaque so cannot use subregs. */
- if (mode == OOmode || mode == XOmode )
+ if (mode == OOmode || mode == XOmode || mode == TDOmode)
{
for (i = nregs - 1; i >= 0; i--)
{
@@ -27979,7 +28041,7 @@ rs6000_split_multireg_move (rtx dst, rtx src)
continue;
/* XO/OO are opaque so cannot use subregs. */
- if (mode == OOmode || mode == XOmode )
+ if (mode == OOmode || mode == XOmode || mode == TDOmode)
{
rtx dst_i = gen_rtx_REG (reg_mode, REGNO (dst) + j);
rtx src_i = gen_rtx_REG (reg_mode, REGNO (src) + j);
@@ -28961,7 +29023,8 @@ rs6000_invalid_conversion (const_tree fromtype, const_tree totype)
if (frommode != tomode)
{
- /* Do not allow conversions to/from XOmode and OOmode types. */
+ /* Do not allow conversions to/from XOmode, OOmode, and TDOmode
+ types. */
if (frommode == XOmode)
return N_("invalid conversion from type %<__vector_quad%>");
if (tomode == XOmode)
@@ -28970,6 +29033,10 @@ rs6000_invalid_conversion (const_tree fromtype, const_tree totype)
return N_("invalid conversion from type %<__vector_pair%>");
if (tomode == OOmode)
return N_("invalid conversion to type %<__vector_pair%>");
+ if (frommode == TDOmode)
+ return N_("invalid conversion from type %<__dmr%>");
+ if (tomode == TDOmode)
+ return N_("invalid conversion to type %<__dmr%>");
}
/* Conversion allowed. */
diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
index f2a303e83a6..1a09f851a5d 100644
--- a/gcc/config/rs6000/rs6000.h
+++ b/gcc/config/rs6000/rs6000.h
@@ -1006,7 +1006,8 @@ enum data_align { align_abi, align_opt, align_both };
/* Modes that are not vectors, but require vector alignment. Treat these like
vectors in terms of loads and stores. */
#define VECTOR_ALIGNMENT_P(MODE) \
- (FLOAT128_VECTOR_P (MODE) || (MODE) == OOmode || (MODE) == XOmode)
+ (FLOAT128_VECTOR_P (MODE) || (MODE) == OOmode || (MODE) == XOmode \
+ || (MODE) == TDOmode)
#define ALTIVEC_VECTOR_MODE(MODE) \
((MODE) == V16QImode \
@@ -2292,6 +2293,7 @@ enum rs6000_builtin_type_index
RS6000_BTI_const_str, /* pointer to const char * */
RS6000_BTI_vector_pair, /* unsigned 256-bit types (vector pair). */
RS6000_BTI_vector_quad, /* unsigned 512-bit types (vector quad). */
+ RS6000_BTI_dmr, /* unsigned 1,024-bit types (dmr). */
RS6000_BTI_const_ptr_void, /* const pointer to void */
RS6000_BTI_ptr_V16QI,
RS6000_BTI_ptr_V1TI,
@@ -2330,6 +2332,7 @@ enum rs6000_builtin_type_index
RS6000_BTI_ptr_dfloat128,
RS6000_BTI_ptr_vector_pair,
RS6000_BTI_ptr_vector_quad,
+ RS6000_BTI_ptr_dmr,
RS6000_BTI_ptr_long_long,
RS6000_BTI_ptr_long_long_unsigned,
RS6000_BTI_MAX
@@ -2387,6 +2390,7 @@ enum rs6000_builtin_type_index
#define const_str_type_node (rs6000_builtin_types[RS6000_BTI_const_str])
#define vector_pair_type_node (rs6000_builtin_types[RS6000_BTI_vector_pair])
#define vector_quad_type_node (rs6000_builtin_types[RS6000_BTI_vector_quad])
+#define dmr_type_node (rs6000_builtin_types[RS6000_BTI_dmr])
#define pcvoid_type_node (rs6000_builtin_types[RS6000_BTI_const_ptr_void])
#define ptr_V16QI_type_node (rs6000_builtin_types[RS6000_BTI_ptr_V16QI])
#define ptr_V1TI_type_node (rs6000_builtin_types[RS6000_BTI_ptr_V1TI])
@@ -2425,6 +2429,7 @@ enum rs6000_builtin_type_index
#define ptr_dfloat128_type_node (rs6000_builtin_types[RS6000_BTI_ptr_dfloat128])
#define ptr_vector_pair_type_node (rs6000_builtin_types[RS6000_BTI_ptr_vector_pair])
#define ptr_vector_quad_type_node (rs6000_builtin_types[RS6000_BTI_ptr_vector_quad])
+#define ptr_dmr_type_node (rs6000_builtin_types[RS6000_BTI_ptr_dmr])
#define ptr_long_long_integer_type_node (rs6000_builtin_types[RS6000_BTI_ptr_long_long])
#define ptr_long_long_unsigned_type_node (rs6000_builtin_types[RS6000_BTI_ptr_long_long_unsigned])
diff --git a/gcc/testsuite/gcc.target/powerpc/dm-1024bit.c b/gcc/testsuite/gcc.target/powerpc/dm-1024bit.c
new file mode 100644
index 00000000000..0a9884ddf63
--- /dev/null
+++ b/gcc/testsuite/gcc.target/powerpc/dm-1024bit.c
@@ -0,0 +1,63 @@
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_dense_math_ok } */
+/* { dg-options "-mdejagnu-cpu=future -O2" } */
+
+/* Test basic load/store for __dmr type. */
+
+#ifndef CONSTRAINT
+#if defined(USE_D)
+#define CONSTRAINT "d"
+
+#elif defined(USE_V)
+#define CONSTRAINT "v"
+
+#elif defined(USE_WA)
+#define CONSTRAINT "wa"
+
+#else
+#define CONSTRAINT "wD"
+#endif
+#endif
+const char constraint[] = CONSTRAINT;
+
+void foo_mem_asm (__dmr *p, __dmr *q)
+{
+ /* 2 LXVP instructions. */
+ __dmr vq = *p;
+
+ /* 2 DMXXINSTDMR512 instructions to transfer VSX to DMR. */
+ __asm__ ("# foo (" CONSTRAINT ") %A0" : "+" CONSTRAINT (vq));
+ /* 2 DMXXEXTFDMR512 instructions to transfer DMR to VSX. */
+
+ /* 2 STXVP instructions. */
+ *q = vq;
+}
+
+void foo_mem_asm2 (__dmr *p, __dmr *q)
+{
+ /* 2 LXVP instructions. */
+ __dmr vq = *p;
+ __dmr vq2;
+ __dmr vq3;
+
+ /* 2 DMXXINSTDMR512 instructions to transfer VSX to DMR. */
+ __asm__ ("# foo1 (" CONSTRAINT ") %A0" : "+" CONSTRAINT (vq));
+ /* 2 DMXXEXTFDMR512 instructions to transfer DMR to VSX. */
+
+ vq2 = vq;
+ __asm__ ("# foo2 (wa) %0" : "+wa" (vq2));
+
+ /* 2 STXVP instructions. */
+ *q = vq2;
+}
+
+void foo_mem (__dmr *p, __dmr *q)
+{
+ /* 2 LXVP, 2 STXVP instructions, no DMR transfer. */
+ *q = *p;
+}
+
+/* { dg-final { scan-assembler-times {\mdmxxextfdmr512\M} 4 } } */
+/* { dg-final { scan-assembler-times {\mdmxxinstdmr512\M} 4 } } */
+/* { dg-final { scan-assembler-times {\mlxvp\M} 12 } } */
+/* { dg-final { scan-assembler-times {\mstxvp\M} 12 } } */
--
2.41.0
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping: [PATCH 1/6] PowerPC: Add -mcpu=future option
2023-10-18 23:58 ` [PATCH 1/6] PowerPC: Add -mcpu=future option Michael Meissner
@ 2023-10-25 20:15 ` Michael Meissner
2023-11-03 7:49 ` Ping #2: " Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-25 20:15 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping patch.
| Date: Wed, 18 Oct 2023 19:58:56 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: Re: [PATCH 1/6] PowerPC: Add -mcpu=future option
| Message-ID: <ZTBxQKlWTmHaKNeO@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633511.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping: [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair.
2023-10-19 0:00 ` [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair Michael Meissner
@ 2023-10-25 20:16 ` Michael Meissner
2023-11-03 7:50 ` Ping #2: " Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-25 20:16 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping patch.
| Date: Wed, 18 Oct 2023 20:00:18 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair.
| Message-ID: <ZTBxkkoelVIxvnEy@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633512.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping: [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers.
2023-10-19 0:01 ` [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers Michael Meissner
@ 2023-10-25 20:18 ` Michael Meissner
2023-11-03 7:51 ` Ping #2: " Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-25 20:18 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping patch:
| ate: Wed, 18 Oct 2023 20:01:54 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers.
| Message-ID: <ZTBx8rGikeUfgp1c@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633513.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping: [PATCH 4/6] PowerPC: Make MMA insns support DMR registers.
2023-10-19 0:03 ` [PATCH 4/6] PowerPC: Make MMA insns support " Michael Meissner
@ 2023-10-25 20:19 ` Michael Meissner
0 siblings, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-25 20:19 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping patch.
| Date: Wed, 18 Oct 2023 20:03:02 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: [PATCH 4/6] PowerPC: Make MMA insns support DMR registers.
| Message-ID: <ZTByNkF+jxxDIyEK@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633514.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping: [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations.
2023-10-19 0:04 ` [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations Michael Meissner
@ 2023-10-25 20:20 ` Michael Meissner
2023-11-03 7:52 ` Ping #2: " Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-25 20:20 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping patch.
| Date: Wed, 18 Oct 2023 20:04:44 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations.
| Message-ID: <ZTBynMSpnS9pUvel@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633515.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping: [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers.
2023-10-19 0:06 ` [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers Michael Meissner
@ 2023-10-25 20:21 ` Michael Meissner
2023-11-03 7:53 ` Ping #2: " Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-10-25 20:21 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping patch.
| Date: Wed, 18 Oct 2023 20:06:20 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers.
| Message-ID: <ZTBy/OekceZLGEAo@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633516.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping #2: [PATCH 1/6] PowerPC: Add -mcpu=future option
2023-10-18 23:58 ` [PATCH 1/6] PowerPC: Add -mcpu=future option Michael Meissner
2023-10-25 20:15 ` Ping: " Michael Meissner
@ 2023-11-03 7:49 ` Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-11-03 7:49 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping #2
| Date: Wed, 18 Oct 2023 19:58:56 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: Re: [PATCH 1/6] PowerPC: Add -mcpu=future option
| Message-ID: <ZTBxQKlWTmHaKNeO@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633511.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping #2: [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair.
2023-10-19 0:00 ` [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair Michael Meissner
2023-10-25 20:16 ` Ping: " Michael Meissner
@ 2023-11-03 7:50 ` Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-11-03 7:50 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping #2
| Date: Wed, 18 Oct 2023 20:00:18 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair.
| Message-ID: <ZTBxkkoelVIxvnEy@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633512.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping #2: [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers.
2023-10-19 0:01 ` [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers Michael Meissner
2023-10-25 20:18 ` Ping: " Michael Meissner
@ 2023-11-03 7:51 ` Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-11-03 7:51 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping #2
| Date: Wed, 18 Oct 2023 20:01:54 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers.
| Message-ID: <ZTBx8rGikeUfgp1c@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633514.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping #2: [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations.
2023-10-19 0:04 ` [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations Michael Meissner
2023-10-25 20:20 ` Ping: " Michael Meissner
@ 2023-11-03 7:52 ` Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-11-03 7:52 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping #2
| Date: Wed, 18 Oct 2023 20:04:44 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations.
| Message-ID: <ZTBynMSpnS9pUvel@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633515.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Ping #2: [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers.
2023-10-19 0:06 ` [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers Michael Meissner
2023-10-25 20:21 ` Ping: " Michael Meissner
@ 2023-11-03 7:53 ` Michael Meissner
1 sibling, 0 replies; 18+ messages in thread
From: Michael Meissner @ 2023-11-03 7:53 UTC (permalink / raw)
To: Michael Meissner, gcc-patches, Segher Boessenkool, Kewen.Lin,
David Edelsohn, Peter Bergner
Ping #2
| Date: Wed, 18 Oct 2023 20:06:20 -0400
| From: Michael Meissner <meissner@linux.ibm.com>
| Subject: [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers.
| Message-ID: <ZTBy/OekceZLGEAo@cowardly-lion.the-meissners.org>
https://gcc.gnu.org/pipermail/gcc-patches/2023-October/633516.html
--
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2023-11-03 7:53 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-10-18 23:55 [PATCH 0/6] PowerPC Future patches Michael Meissner
2023-10-18 23:58 ` [PATCH 1/6] PowerPC: Add -mcpu=future option Michael Meissner
2023-10-25 20:15 ` Ping: " Michael Meissner
2023-11-03 7:49 ` Ping #2: " Michael Meissner
2023-10-19 0:00 ` [PATCH 2/6] PowerPC: Make -mcpu=future enable -mblock-ops-vector-pair Michael Meissner
2023-10-25 20:16 ` Ping: " Michael Meissner
2023-11-03 7:50 ` Ping #2: " Michael Meissner
2023-10-19 0:01 ` [PATCH 3/6] PowerPC: Add support for accumulators in DMR registers Michael Meissner
2023-10-25 20:18 ` Ping: " Michael Meissner
2023-11-03 7:51 ` Ping #2: " Michael Meissner
2023-10-19 0:03 ` [PATCH 4/6] PowerPC: Make MMA insns support " Michael Meissner
2023-10-25 20:19 ` Ping: " Michael Meissner
2023-10-19 0:04 ` [PATCH 5/6] PowerPC: Switch to dense math names for all MMA operations Michael Meissner
2023-10-25 20:20 ` Ping: " Michael Meissner
2023-11-03 7:52 ` Ping #2: " Michael Meissner
2023-10-19 0:06 ` [PATCH 6/6] PowerPC: Add support for 1,024 bit DMR registers Michael Meissner
2023-10-25 20:21 ` Ping: " Michael Meissner
2023-11-03 7:53 ` Ping #2: " Michael Meissner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).