Re: Successful Build and Install

Re: Successful Build and Install

[Per Bothner]

> Thought I'd pass on the info you requested: successful build and
> install.  Worked without a hitch.

Is this "request" still in egcs?  Has it outlived its usefulness?
At least for linux?

	--Per Bothner
Cygnus Solutions     bothner@cygnus.com     http://www.cygnus.com/~bothner

Re: Successful Build and Install

[Joe Buck]

> > Thought I'd pass on the info you requested: successful build and
> > install.  Worked without a hitch.
> 
> Is this "request" still in egcs?  Has it outlived its usefulness?
> At least for linux?

It seems that we would only want:
* reports of failures on systems we believe to work
* reports of successes *or* failures on systems we haven't tested.

So we should be telling folks something like: if you run X, Y, or Z,
let us know if the install fails or there are large numbers of test
failures.  If you have something more exotic, we'd appreciate a report
if you build successfully.  And the list can be dynamic: if we hadn't
verified, say, FreeBSD 2.2.6 but some user does, we can indicate that.

Re: Successful Build and Install

[Joe Buck]

I wrote:

>   > It seems that we would only want:
>   > * reports of failures on systems we believe to work
>   > * reports of successes *or* failures on systems we haven't tested.

Jeff writes:
> This is probably the right general direction for minor releases.
> 
> However at each major release it's probably useful to get these
> reports for all systems -- including those we regularly work on.

Just the same, I'd like to cut down on email volume.  We can expect
the egcs user community to increase greatly with time.  Do you want
every single egcs user on Linux to send a mail to everyone on the list,
saying essentially the same thing?  You'll start to drive away developers.
People have other things they want to do with their lives than read egcs,
and if they try using filters they'll miss important messages (delete
all test results?  what if some expose problems?).

Another alternative is to publish a summary of test results on platforms
that we have tried.  We can then ask people to send in a report if their
results differ *and* they've checked a FAQ to make sure they haven't made
a common mistake.  If we have no report for their system, we would use
whatever users send in.

> It's been my experience that as a developer I know how to build
> things dead cold.  It's amazing what kinds of problems are exposed
> by folks that don't build compilers every day...

Exactly.  That's why we need reports from people who get different
results.  But we don't need reports from people who get the same results.

Re: Successful Build and Install

[Jeffrey A Law]

  In message <199803261957.LAA15374@atrus.synopsys.com>you write:
  > It seems that we would only want:
  > * reports of failures on systems we believe to work
  > * reports of successes *or* failures on systems we haven't tested.
  > 
  > So we should be telling folks something like: if you run X, Y, or Z,
  > let us know if the install fails or there are large numbers of test
  > failures.  If you have something more exotic, we'd appreciate a report
  > if you build successfully.  And the list can be dynamic: if we hadn't
  > verified, say, FreeBSD 2.2.6 but some user does, we can indicate that.
This is probably the right general direction for minor releases.

However at each major release it's probably useful to get these
reports for all systems -- including those we regularly work on.

It's been my experience that as a developer I know how to build
things dead cold.  It's amazing what kinds of problems are exposed
by folks that don't build compilers every day...

jeff

Re: Successful Build and Install

[Jeffrey A Law]

  In message < 199803311735.JAA15334@atrus.synopsys.com >you write:
  > I wrote:
  > 
  > >   > It seems that we would only want:
  > >   > * reports of failures on systems we believe to work
  > >   > * reports of successes *or* failures on systems we haven't tested.
  > 
  > Jeff writes:
  > > This is probably the right general direction for minor releases.
  > > 
  > > However at each major release it's probably useful to get these
  > > reports for all systems -- including those we regularly work on.
  > 
  > Just the same, I'd like to cut down on email volume.  We can expect
  > the egcs user community to increase greatly with time.  Do you want
  > every single egcs user on Linux to send a mail to everyone on the list,
  > saying essentially the same thing?  You'll start to drive away developers.
  > People have other things they want to do with their lives than read egcs,
  > and if they try using filters they'll miss important messages (delete
  > all test results?  what if some expose problems?).
Actually, if you're looking that far into the future, the solution
is a web page :-)  Have a little form that you can fill out to specify
what platform you built on, and maybe comments.

That info is then make available on another page -- the idea is to
cut down on the "was anyone able to build on xyz" kinds of questions.

In fact, if someone wants to contribute the html gunk to do this it
would be greatly appreciated.  Note you can check out the web pages
via CVS these days :-)

  > Another alternative is to publish a summary of test results on platforms
  > that we have tried.  We can then ask people to send in a report if their
  > results differ *and* they've checked a FAQ to make sure they haven't made
  > a common mistake.  If we have no report for their system, we would use
  > whatever users send in.
Similarly -- we'd make a set of "baseline" test results available for
releases on major platforms (I don't think it's worth the time for
snapshots).  People could then compare their own with those on the
web.

jeff

successful build and install

[Jiří Vymazal]

Here is info according to installation document on your homepages:
_______________________________________________________
srcdir/config.guess:
x86_64-unknown-linux-gnu

gcc -v:
Using built-in specs.
COLLECT_GCC=./gcc
COLLECT_LTO_WRAPPER=/usr/local/libexec/gcc/x86_64-unknown-linux-gnu/4.9.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: ../src/gcc-4.9.0/configure --enable-thread=posix
--with-fpmath=sse --disable-bootstrap --enable-languages=c,c++
--disable-multilib
Thread model: posix
gcc version 4.9.0 (GCC)

uname --version:
uname (GNU coreutils) 8.20
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
/
Written by David MacKenzie.

uname -a:
Linux cyberspider-MintXfceVM 3.11.0-12-generic #19-Ubuntu SMP Wed Oct
9 16:20:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

dpkg -l libc6:
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name                                 Version
Architecture            Description
+++-====================================-=======================-=======================-=============================================================================
ii  libc6:amd64                          2.17-93ubuntu4          amd64
                  Embedded GNU C Library: Shared libraries
ii  libc6:i386                           2.17-93ubuntu4          i386
                  Embedded GNU C Library: Shared libraries

OS is running in virtualbox 4.3.8 with newest quest additions
(v4.2.16) installed, host is 64-bit Windows 8.1 Pro N,
hardware-assisted virtualization enabled (i7-3537U), 3D acceleration
enabled, virtual machine is given 4096MB RAM, 128MB video memory and 2
cores

Thank you very much, you are doing awesome work!

Re: successful build and install

[Janis Johnson]

On Fri, May 24, 2002 at 04:53:26PM +0200, Benjamin Collar wrote:
> Greetings,
> 
> I've build and installed gcc 3.1 on the system detailed here:
> 
> i686-pc-linux-gnu
> Reading specs from /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.1/specs
> Configured with: /usr/local/src/gcc-3.1/configure --prefix=/usr/local 
> --enable-languages=c,c++
> Thread model: single
> gcc version 3.1
> SuSE Linux 7.3 (i386)
> 2.4.18-lkpc-4 (linux kernel patch collection, rc4)
> glibc-2.2.4-21

Thanks!  Your message is linked from the GCC 3.1 build status list at
http://gcc.gnu.org/gcc-3.1/buildstat.html.

Janis

successful build and install

[Benjamin Collar]

Greetings,

I've build and installed gcc 3.1 on the system detailed here:

i686-pc-linux-gnu
Reading specs from /usr/local/lib/gcc-lib/i686-pc-linux-gnu/3.1/specs
Configured with: /usr/local/src/gcc-3.1/configure --prefix=/usr/local 
--enable-languages=c,c++
Thread model: single
gcc version 3.1
SuSE Linux 7.3 (i386)
2.4.18-lkpc-4 (linux kernel patch collection, rc4)
glibc-2.2.4-21

Successful Build and Install

[S. Colin Leister]

[-- Attachment #1: Type: text/plain, Size: 17 bytes --]

Version: 1.0.3a


[-- Attachment #2: config.guess --]
[-- Type: text/x-shellscript, Size: 24803 bytes --]

#! /bin/sh
# Attempt to guess a canonical system name.
#   Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.

# Written by Per Bothner <bothner@cygnus.com>.
# The master version of this file is at the FSF in /home/gd/gnu/lib.
#
# This script attempts to guess a canonical system name similar to
# config.sub.  If it succeeds, it prints the system name on stdout, and
# exits with 0.  Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
# don't specify an explicit system type (host/target name).
#
# Only a few systems have been added to this list; please add others
# (but try to keep the structure clean).
#

# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 8/24/94.)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
	PATH=$PATH:/.attbin ; export PATH
fi

UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown

trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15

# Note: order is significant - the case branches are not exclusive.

case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
    alpha:OSF1:*:*)
	if test $UNAME_RELEASE = "V4.0"; then
		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
	fi
	# A Vn.n version is a released version.
	# A Tn.n version is a released field test version.
	# A Xn.n version is an unreleased experimental baselevel.
	# 1.2 uses "1.2" for uname -r.
	cat <<EOF >dummy.s
	.globl main
	.ent main
main:
	.frame \$30,0,\$26,0
	.prologue 0
	.long 0x47e03d80 # implver $0
	lda \$2,259
	.long 0x47e20c21 # amask $2,$1
	srl \$1,8,\$2
	sll \$2,2,\$2
	sll \$0,3,\$0
	addl \$1,\$0,\$0
	addl \$2,\$0,\$0
	ret \$31,(\$26),1
	.end main
EOF
	${CC-cc} dummy.s -o dummy 2>/dev/null
	if test "$?" = 0 ; then
		./dummy
		case "$?" in
			7)
				UNAME_MACHINE="alpha"
				;;
			15)
				UNAME_MACHINE="alphaev5"
				;;
			14)
				UNAME_MACHINE="alphaev56"
				;;
			10)
				UNAME_MACHINE="alphapca56"
				;;
			16)
				UNAME_MACHINE="alphaev6"
				;;
		esac
	fi
	rm -f dummy.s dummy
	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
	exit 0 ;;
    21064:Windows_NT:50:3)
	echo alpha-dec-winnt3.5
	exit 0 ;;
    Amiga*:UNIX_System_V:4.0:*)
	echo m68k-cbm-sysv4
	exit 0;;
    amiga:NetBSD:*:*)
      echo m68k-cbm-netbsd${UNAME_RELEASE}
      exit 0 ;;
    amiga:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    arc64:OpenBSD:*:*)
	echo mips64el-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    arc:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    hkmips:OpenBSD:*:*)
	echo mips-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    pmax:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    sgi:OpenBSD:*:*)
	echo mips-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    wgrisc:OpenBSD:*:*)
	echo mipsel-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
	echo arm-acorn-riscix${UNAME_RELEASE}
	exit 0;;
    arm32:NetBSD:*:*)
	echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
	exit 0 ;;
    SR2?01:HI-UX/MPP:*:*)
	echo hppa1.1-hitachi-hiuxmpp
	exit 0;;
    Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
	if test "`(/bin/universe) 2>/dev/null`" = att ; then
		echo pyramid-pyramid-sysv3
	else
		echo pyramid-pyramid-bsd
	fi
	exit 0 ;;
    NILE:*:*:dcosx)
	echo pyramid-pyramid-svr4
	exit 0 ;;
    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    i86pc:SunOS:5.*:*)
	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    sun4*:SunOS:6*:*)
	# According to config.sub, this is the proper way to canonicalize
	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
	# it's likely to be more like Solaris than SunOS4.
	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    sun4*:SunOS:*:*)
	case "`/usr/bin/arch -k`" in
	    Series*|S4*)
		UNAME_RELEASE=`uname -v`
		;;
	esac
	# Japanese Language versions have a version number like `4.1.3-JL'.
	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
	exit 0 ;;
    sun3*:SunOS:*:*)
	echo m68k-sun-sunos${UNAME_RELEASE}
	exit 0 ;;
    sun*:*:4.2BSD:*)
	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
	case "`/bin/arch`" in
	    sun3)
		echo m68k-sun-sunos${UNAME_RELEASE}
		;;
	    sun4)
		echo sparc-sun-sunos${UNAME_RELEASE}
		;;
	esac
	exit 0 ;;
    aushp:SunOS:*:*)
	echo sparc-auspex-sunos${UNAME_RELEASE}
	exit 0 ;;
    atari*:NetBSD:*:*)
	echo m68k-atari-netbsd${UNAME_RELEASE}
	exit 0 ;;
    atari*:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    sun3*:NetBSD:*:*)
	echo m68k-sun-netbsd${UNAME_RELEASE}
	exit 0 ;;
    sun3*:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mac68k:NetBSD:*:*)
	echo m68k-apple-netbsd${UNAME_RELEASE}
	exit 0 ;;
    mac68k:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvme68k:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    mvme88k:OpenBSD:*:*)
	echo m88k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    powerpc:machten:*:*)
	echo powerpc-apple-machten${UNAME_RELEASE}
	exit 0 ;;
    RISC*:Mach:*:*)
	echo mips-dec-mach_bsd4.3
	exit 0 ;;
    RISC*:ULTRIX:*:*)
	echo mips-dec-ultrix${UNAME_RELEASE}
	exit 0 ;;
    VAX*:ULTRIX*:*:*)
	echo vax-dec-ultrix${UNAME_RELEASE}
	exit 0 ;;
    2020:CLIX:*:*)
	echo clipper-intergraph-clix${UNAME_RELEASE}
	exit 0 ;;
    mips:*:*:UMIPS | mips:*:*:RISCos)
	sed 's/^	//' << EOF >dummy.c
	int main (argc, argv) int argc; char **argv; {
	#if defined (host_mips) && defined (MIPSEB)
	#if defined (SYSTYPE_SYSV)
	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
	#endif
	#if defined (SYSTYPE_SVR4)
	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
	#endif
	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
	#endif
	#endif
	  exit (-1);
	}
EOF
	${CC-cc} dummy.c -o dummy \
	  && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
	  && rm dummy.c dummy && exit 0
	rm -f dummy.c dummy
	echo mips-mips-riscos${UNAME_RELEASE}
	exit 0 ;;
    Night_Hawk:Power_UNIX:*:*)
	echo powerpc-harris-powerunix
	exit 0 ;;
    m88k:CX/UX:7*:*)
	echo m88k-harris-cxux7
	exit 0 ;;
    m88k:*:4*:R4*)
	echo m88k-motorola-sysv4
	exit 0 ;;
    m88k:*:3*:R3*)
	echo m88k-motorola-sysv3
	exit 0 ;;
    AViiON:dgux:*:*)
        # DG/UX returns AViiON for all architectures
        UNAME_PROCESSOR=`/usr/bin/uname -p`
        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
		echo m88k-dg-dgux${UNAME_RELEASE}
	else
		echo m88k-dg-dguxbcs${UNAME_RELEASE}
	fi
        else echo i586-dg-dgux${UNAME_RELEASE}
        fi
 	exit 0 ;;
    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
	echo m88k-dolphin-sysv3
	exit 0 ;;
    M88*:*:R3*:*)
	# Delta 88k system running SVR3
	echo m88k-motorola-sysv3
	exit 0 ;;
    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
	echo m88k-tektronix-sysv3
	exit 0 ;;
    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
	echo m68k-tektronix-bsd
	exit 0 ;;
    *:IRIX*:*:*)
	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
	exit 0 ;;
    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
    i?86:AIX:*:*)
	echo i386-ibm-aix
	exit 0 ;;
    *:AIX:2:3)
	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
		sed 's/^		//' << EOF >dummy.c
		#include <sys/systemcfg.h>

		main()
			{
			if (!__power_pc())
				exit(1);
			puts("powerpc-ibm-aix3.2.5");
			exit(0);
			}
EOF
		${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
		rm -f dummy.c dummy
		echo rs6000-ibm-aix3.2.5
	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
		echo rs6000-ibm-aix3.2.4
	else
		echo rs6000-ibm-aix3.2
	fi
	exit 0 ;;
    *:AIX:*:4)
	if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
		IBM_ARCH=rs6000
	else
		IBM_ARCH=powerpc
	fi
	if [ -x /usr/bin/oslevel ] ; then
		IBM_REV=`/usr/bin/oslevel`
	else
		IBM_REV=4.${UNAME_RELEASE}
	fi
	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
	exit 0 ;;
    *:AIX:*:*)
	echo rs6000-ibm-aix
	exit 0 ;;
    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
	echo romp-ibm-bsd4.4
	exit 0 ;;
    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
	exit 0 ;;                           # report: romp-ibm BSD 4.3
    *:BOSX:*:*)
	echo rs6000-bull-bosx
	exit 0 ;;
    DPX/2?00:B.O.S.:*:*)
	echo m68k-bull-sysv3
	exit 0 ;;
    9000/[34]??:4.3bsd:1.*:*)
	echo m68k-hp-bsd
	exit 0 ;;
    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
	echo m68k-hp-bsd4.4
	exit 0 ;;
    9000/[3478]??:HP-UX:*:*)
	case "${UNAME_MACHINE}" in
	    9000/31? )            HP_ARCH=m68000 ;;
	    9000/[34]?? )         HP_ARCH=m68k ;;
	    9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
	    9000/8?? )            HP_ARCH=hppa1.0 ;;
	esac
	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
	exit 0 ;;
    3050*:HI-UX:*:*)
	sed 's/^	//' << EOF >dummy.c
	#include <unistd.h>
	int
	main ()
	{
	  long cpu = sysconf (_SC_CPU_VERSION);
	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
	     results, however.  */
	  if (CPU_IS_PA_RISC (cpu))
	    {
	      switch (cpu)
		{
		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
		  default: puts ("hppa-hitachi-hiuxwe2"); break;
		}
	    }
	  else if (CPU_IS_HP_MC68K (cpu))
	    puts ("m68k-hitachi-hiuxwe2");
	  else puts ("unknown-hitachi-hiuxwe2");
	  exit (0);
	}
EOF
	${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
	rm -f dummy.c dummy
	echo unknown-hitachi-hiuxwe2
	exit 0 ;;
    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
	echo hppa1.1-hp-bsd
	exit 0 ;;
    9000/8??:4.3bsd:*:*)
	echo hppa1.0-hp-bsd
	exit 0 ;;
    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
	echo hppa1.1-hp-osf
	exit 0 ;;
    hp8??:OSF1:*:*)
	echo hppa1.0-hp-osf
	exit 0 ;;
    i?86:OSF1:*:*)
	if [ -x /usr/sbin/sysversion ] ; then
	    echo ${UNAME_MACHINE}-unknown-osf1mk
	else
	    echo ${UNAME_MACHINE}-unknown-osf1
	fi
	exit 0 ;;
    parisc*:Lites*:*:*)
	echo hppa1.1-hp-lites
	exit 0 ;;
    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
	echo c1-convex-bsd
        exit 0 ;;
    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
	fi
        exit 0 ;;
    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
	echo c34-convex-bsd
        exit 0 ;;
    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
	echo c38-convex-bsd
        exit 0 ;;
    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
	echo c4-convex-bsd
        exit 0 ;;
    CRAY*X-MP:*:*:*)
	echo xmp-cray-unicos
        exit 0 ;;
    CRAY*Y-MP:*:*:*)
	echo ymp-cray-unicos${UNAME_RELEASE}
	exit 0 ;;
    CRAY*[A-Z]90:*:*:*)
	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
	exit 0 ;;
    CRAY*TS:*:*:*)
	echo t90-cray-unicos${UNAME_RELEASE}
	exit 0 ;;
    CRAY-2:*:*:*)
	echo cray2-cray-unicos
        exit 0 ;;
    F300:UNIX_System_V:*:*)
        FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
        exit 0 ;;
    F301:UNIX_System_V:*:*)
       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
       exit 0 ;;
    hp3[0-9][05]:NetBSD:*:*)
	echo m68k-hp-netbsd${UNAME_RELEASE}
	exit 0 ;;
    hp300:OpenBSD:*:*)
	echo m68k-unknown-openbsd${UNAME_RELEASE}
	exit 0 ;;
    i?86:BSD/386:*:* | *:BSD/OS:*:*)
	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
	exit 0 ;;
    *:FreeBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
	exit 0 ;;
    *:NetBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
	exit 0 ;;
    *:OpenBSD:*:*)
	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
	exit 0 ;;
    i*:CYGWIN*:*)
	echo i386-pc-cygwin32
	exit 0 ;;
    i*:MINGW*:*)
	echo i386-pc-mingw32
	exit 0 ;;
    p*:CYGWIN*:*)
	echo powerpcle-unknown-cygwin32
	exit 0 ;;
    prep*:SunOS:5.*:*)
	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
	exit 0 ;;
    *:GNU:*:*)
	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
	exit 0 ;;
    *:Linux:*:*)
	# The BFD linker knows what the default object file format is, so
	# first see if it will tell us.
	ld_help_string=`ld --help 2>&1`
	ld_supported_emulations=`echo $ld_help_string \
			 | sed -ne '/supported emulations:/!d
				    s/[ 	][ 	]*/ /g
				    s/.*supported emulations: *//
				    s/ .*//
				    p'`
        case "$ld_supported_emulations" in
	  i?86linux)  echo "${UNAME_MACHINE}-pc-linux-gnuaout"      ; exit 0 ;;
	  i?86coff)   echo "${UNAME_MACHINE}-pc-linux-gnucoff"      ; exit 0 ;;
	  sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
	  m68klinux)  echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
	  elf32ppc)
		# Determine Lib Version
		cat >dummy.c <<EOF
#include <features.h>
#if defined(__GLIBC__)
extern char __libc_version[];
extern char __libc_release[];
#endif
main(argc, argv)
     int argc;
     char *argv[];
{
#if defined(__GLIBC__)
  printf("%s %s\n", __libc_version, __libc_release);
#else
  printf("unkown\n");
#endif
  return 0;
}
EOF
		LIBC=""
		${CC-cc} dummy.c -o dummy 2>/dev/null
		if test "$?" = 0 ; then
			./dummy | grep 1\.99 > /dev/null
			if test "$?" = 0 ; then
				LIBC="libc1"
			fi
		fi	
		rm -f dummy.c dummy
		echo powerpc-unknown-linux-gnu${LIBC} ; exit 0 ;;
	esac

	if test "${UNAME_MACHINE}" = "alpha" ; then
		sed 's/^	//'  <<EOF >dummy.s
		.globl main
		.ent main
	main:
		.frame \$30,0,\$26,0
		.prologue 0
		.long 0x47e03d80 # implver $0
		lda \$2,259
		.long 0x47e20c21 # amask $2,$1
		srl \$1,8,\$2
		sll \$2,2,\$2
		sll \$0,3,\$0
		addl \$1,\$0,\$0
		addl \$2,\$0,\$0
		ret \$31,(\$26),1
		.end main
EOF
		LIBC=""
		${CC-cc} dummy.s -o dummy 2>/dev/null
		if test "$?" = 0 ; then
			./dummy
			case "$?" in
			7)
				UNAME_MACHINE="alpha"
				;;
			15)
				UNAME_MACHINE="alphaev5"
				;;
			14)
				UNAME_MACHINE="alphaev56"
				;;
			10)
				UNAME_MACHINE="alphapca56"
				;;
			16)
				UNAME_MACHINE="alphaev6"
				;;
			esac	

			objdump --private-headers dummy | \
			  grep ld.so.1 > /dev/null
			if test "$?" = 0 ; then
				LIBC="libc1"
			fi
		fi	
		rm -f dummy.s dummy
		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
	elif test "${UNAME_MACHINE}" = "mips" ; then
	  cat >dummy.c <<EOF
main(argc, argv)
     int argc;
     char *argv[];
{
#ifdef __MIPSEB__
  printf ("%s-unknown-linux-gnu\n", argv[1]);
#endif
#ifdef __MIPSEL__
  printf ("%sel-unknown-linux-gnu\n", argv[1]);
#endif
  return 0;
}
EOF
	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
	  rm -f dummy.c dummy
	else
	  # Either a pre-BFD a.out linker (linux-gnuoldld)
	  # or one that does not give us useful --help.
	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
	  # If ld does not provide *any* "supported emulations:"
	  # that means it is gnuoldld.
	  echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
	  test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0

	  case "${UNAME_MACHINE}" in
	  i?86)
	    VENDOR=pc;
	    ;;
	  *)
	    VENDOR=unknown;
	    ;;
	  esac
	  # Determine whether the default compiler is a.out or elf
	  cat >dummy.c <<EOF
#include <features.h>
main(argc, argv)
     int argc;
     char *argv[];
{
#ifdef __ELF__
# ifdef __GLIBC__
#  if __GLIBC__ >= 2
    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
#  else
    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
#  endif
# else
   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
# endif
#else
  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
#endif
  return 0;
}
EOF
	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
	  rm -f dummy.c dummy
	fi ;;
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
# are messed up and put the nodename in both sysname and nodename.
    i?86:DYNIX/ptx:4*:*)
	echo i386-sequent-sysv4
	exit 0 ;;
    i?86:UNIX_SV:4.2MP:2.*)
        # Unixware is an offshoot of SVR4, but it has its own version
        # number series starting with 2...
        # I am not positive that other SVR4 systems won't match this,
	# I just have to hope.  -- rms.
        # Use sysv4.2uw... so that sysv4* matches it.
	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
	exit 0 ;;
    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
	else
		echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
	fi
	exit 0 ;;
    i?86:*:3.2:*)
	if test -f /usr/options/cb.name; then
		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
	elif /bin/uname -X 2>/dev/null >/dev/null ; then
		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
			&& UNAME_MACHINE=i586
		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
	else
		echo ${UNAME_MACHINE}-pc-sysv32
	fi
	exit 0 ;;
    pc:*:*:*)
        # uname -m prints for DJGPP always 'pc', but it prints nothing about
        # the processor, so we play safe by assuming i386.
	echo i386-pc-msdosdjgpp
        exit 0 ;;
    Intel:Mach:3*:*)
	echo i386-pc-mach3
	exit 0 ;;
    paragon:*:*:*)
	echo i860-intel-osf1
	exit 0 ;;
    i860:*:4.*:*) # i860-SVR4
	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
	else # Add other i860-SVR4 vendors below as they are discovered.
	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
	fi
	exit 0 ;;
    mini*:CTIX:SYS*5:*)
	# "miniframe"
	echo m68010-convergent-sysv
	exit 0 ;;
    M68*:*:R3V[567]*:*)
	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
	OS_REL=''
	test -r /etc/.relid \
	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
          && echo i486-ncr-sysv4 && exit 0 ;;
    m68*:LynxOS:2.*:*)
	echo m68k-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    mc68030:UNIX_System_V:4.*:*)
	echo m68k-atari-sysv4
	exit 0 ;;
    i?86:LynxOS:2.*:*)
	echo i386-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    TSUNAMI:LynxOS:2.*:*)
	echo sparc-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
	echo rs6000-unknown-lynxos${UNAME_RELEASE}
	exit 0 ;;
    SM[BE]S:UNIX_SV:*:*)
	echo mips-dde-sysv${UNAME_RELEASE}
	exit 0 ;;
    RM*:SINIX-*:*:*)
	echo mips-sni-sysv4
	exit 0 ;;
    *:SINIX-*:*:*)
	if uname -p 2>/dev/null >/dev/null ; then
		UNAME_MACHINE=`(uname -p) 2>/dev/null`
		echo ${UNAME_MACHINE}-sni-sysv4
	else
		echo ns32k-sni-sysv
	fi
	exit 0 ;;
    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
                           # says <Richard.M.Bartel@ccMail.Census.GOV>
        echo i586-unisys-sysv4
        exit 0 ;;
    *:UNIX_System_V:4*:FTX*)
	# From Gerald Hewes <hewes@openmarket.com>.
	# How about differentiating between stratus architectures? -djm
	echo hppa1.1-stratus-sysv4
	exit 0 ;;
    *:*:*:FTX*)
	# From seanf@swdc.stratus.com.
	echo i860-stratus-sysv4
	exit 0 ;;
    mc68*:A/UX:*:*)
	echo m68k-apple-aux${UNAME_RELEASE}
	exit 0 ;;
    news*:NEWS-OS:*:6*)
	echo mips-sony-newsos6
	exit 0 ;;
    R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
	if [ -d /usr/nec ]; then
	        echo mips-nec-sysv${UNAME_RELEASE}
	else
	        echo mips-unknown-sysv${UNAME_RELEASE}
	fi
        exit 0 ;;
esac

#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2

cat >dummy.c <<EOF
#ifdef _SEQUENT_
# include <sys/types.h>
# include <sys/utsname.h>
#endif
main ()
{
#if defined (sony)
#if defined (MIPSEB)
  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
     I don't know....  */
  printf ("mips-sony-bsd\n"); exit (0);
#else
#include <sys/param.h>
  printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
          "4"
#else
	  ""
#endif
         ); exit (0);
#endif
#endif

#if defined (__arm) && defined (__acorn) && defined (__unix)
  printf ("arm-acorn-riscix"); exit (0);
#endif

#if defined (hp300) && !defined (hpux)
  printf ("m68k-hp-bsd\n"); exit (0);
#endif

#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
  int version;
  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
  printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
  exit (0);
#endif

#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
  printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
  printf ("ns32k-encore-mach\n"); exit (0);
#else
  printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif

#if defined (__386BSD__)
  printf ("i386-pc-bsd\n"); exit (0);
#endif

#if defined (sequent)
#if defined (i386)
  printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
  printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif

#if defined (_SEQUENT_)
    struct utsname un;

    uname(&un);

    if (strncmp(un.version, "V2", 2) == 0) {
	printf ("i386-sequent-ptx2\n"); exit (0);
    }
    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
	printf ("i386-sequent-ptx1\n"); exit (0);
    }
    printf ("i386-sequent-ptx\n"); exit (0);

#endif

#if defined (vax)
#if !defined (ultrix)
  printf ("vax-dec-bsd\n"); exit (0);
#else
  printf ("vax-dec-ultrix\n"); exit (0);
#endif
#endif

#if defined (alliant) && defined (i860)
  printf ("i860-alliant-bsd\n"); exit (0);
#endif

  exit (1);
}
EOF

${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
rm -f dummy.c dummy

# Apollos put the system type in the environment.

test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }

# Convex versions that predate uname can use getsysinfo(1)

if [ -x /usr/convex/getsysinfo ]
then
    case `getsysinfo -f cpu_type` in
    c1*)
	echo c1-convex-bsd
	exit 0 ;;
    c2*)
	if getsysinfo -f scalar_acc
	then echo c32-convex-bsd
	else echo c2-convex-bsd
	fi
	exit 0 ;;
    c34*)
	echo c34-convex-bsd
	exit 0 ;;
    c38*)
	echo c38-convex-bsd
	exit 0 ;;
    c4*)
	echo c4-convex-bsd
	exit 0 ;;
    esac
fi

#echo '(Unable to guess system type)' 1>&2

exit 1

Successful Build and Install

[Pete Willemsen]

Thought I'd pass on the info you requested: successful build and
install.  Worked without a hitch.

Here's the output from config.guess

i686-pc-linux-gnu

I appreciate your efforts!  Thanks.

Regards,
Pete
----------------------------------------------
Pete Willemsen        Department of Comp. Sci.
willemsn@cs.uiowa.edu       University of Iowa
                      ---
http://www.cs.uiowa.edu/~willemsn
----------------------------------------------