From: Pedro Alves <pedro@palves.net>
To: gdb-patches@sourceware.org
Subject: [PATCH 12/25] all-stop/synchronous RSP support thread-exit events
Date: Mon, 20 Jun 2022 23:54:06 +0100 [thread overview]
Message-ID: <20220620225419.382221-13-pedro@palves.net> (raw)
In-Reply-To: <20220620225419.382221-1-pedro@palves.net>
Currently, GDB does not understand the THREAD_EXITED stop reply in
remote all-stop mode. There's no good reason for this, it just
happened that THREAD_EXITED was only ever reported in non-stop mode so
far. This patch teaches GDB to parse that event in all-stop RSP too.
There is no need to add a qSupported feature for this, because the
server won't send a THREAD_EXITED event unless GDB explicitly asks for
it, with QThreadEvents, or with the GDB_TO_EXIT QThreadOptions option
added in the next patch.
Change-Id: Ide5d12391adf432779fe4c79526801c4a5630966
---
gdb/remote.c | 5 +++--
gdbserver/server.cc | 1 +
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/gdb/remote.c b/gdb/remote.c
index 20f2b7f399d..5bfbe28b8c3 100644
--- a/gdb/remote.c
+++ b/gdb/remote.c
@@ -8179,7 +8179,8 @@ remote_target::process_stop_reply (struct stop_reply *stop_reply,
&& status->kind () != TARGET_WAITKIND_NO_RESUMED)
{
/* Expedited registers. */
- if (!stop_reply->regcache.empty ())
+ if (status->kind () != TARGET_WAITKIND_THREAD_EXITED
+ && !stop_reply->regcache.empty ())
{
struct regcache *regcache
= get_thread_arch_regcache (this, ptid, stop_reply->arch);
@@ -8365,7 +8366,7 @@ remote_target::wait_as (ptid_t ptid, target_waitstatus *status,
again. Keep waiting for events. */
rs->waiting_for_stop_reply = 1;
break;
- case 'N': case 'T': case 'S': case 'X': case 'W':
+ case 'N': case 'T': case 'S': case 'X': case 'W': case 'w':
{
/* There is a stop reply to handle. */
rs->waiting_for_stop_reply = 0;
diff --git a/gdbserver/server.cc b/gdbserver/server.cc
index 45b8ac60db0..fc64a442ab4 100644
--- a/gdbserver/server.cc
+++ b/gdbserver/server.cc
@@ -3054,6 +3054,7 @@ resume (struct thread_resume *actions, size_t num_actions)
if (cs.last_status.kind () != TARGET_WAITKIND_EXITED
&& cs.last_status.kind () != TARGET_WAITKIND_SIGNALLED
+ && cs.last_status.kind () != TARGET_WAITKIND_THREAD_EXITED
&& cs.last_status.kind () != TARGET_WAITKIND_NO_RESUMED)
current_thread->last_status = cs.last_status;
--
2.36.0
next prev parent reply other threads:[~2022-06-20 22:54 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-20 22:53 [PATCH 00/25] Step over thread clone and thread exit Pedro Alves
2022-06-20 22:53 ` [PATCH 01/25] Don't use pthread_mutex_t in gdb.base/step-over-clone.c Pedro Alves
2022-07-13 21:35 ` Pedro Alves
2022-06-20 22:53 ` [PATCH 02/25] displaced step: pass down target_waitstatus instead of gdb_signal Pedro Alves
2022-06-20 22:53 ` [PATCH 03/25] linux-nat: introduce pending_status_str Pedro Alves
2022-06-20 22:53 ` [PATCH 04/25] Step over clone syscall w/ breakpoint, TARGET_WAITKIND_THREAD_CLONED Pedro Alves
2022-06-20 22:53 ` [PATCH 05/25] Support clone events in the remote protocol Pedro Alves
2022-06-20 22:54 ` [PATCH 06/25] Thread options & clone events (core + remote) Pedro Alves
2022-06-20 22:54 ` [PATCH 07/25] Thread options & clone events (native Linux) Pedro Alves
2022-06-20 22:54 ` [PATCH 08/25] Thread options & clone events (Linux GDBserver) Pedro Alves
2022-06-20 22:54 ` [PATCH 09/25] gdbserver: Hide and don't detach pending clone children Pedro Alves
2022-06-20 22:54 ` [PATCH 10/25] Remove gdb/19675 kfails (displaced stepping + clone) Pedro Alves
2022-06-20 22:54 ` [PATCH 11/25] Add test for stepping over clone syscall Pedro Alves
2022-06-20 22:54 ` Pedro Alves [this message]
2022-06-20 22:54 ` [PATCH 13/25] Introduce GDB_TO_EXIT thread option, fix step-over-thread-exit Pedro Alves
2022-06-20 22:54 ` [PATCH 14/25] Implement GDB_TO_EXIT support for Linux GDBserver Pedro Alves
2022-06-20 22:54 ` [PATCH 15/25] Implement GDB_TO_EXIT support for native Linux Pedro Alves
2022-06-20 22:54 ` [PATCH 16/25] gdb: clear step over information on thread exit (PR gdb/27338) Pedro Alves
2022-06-20 22:54 ` [PATCH 17/25] stop_all_threads: (re-)enable async before waiting for stops Pedro Alves
2022-06-20 22:54 ` [PATCH 18/25] gdbserver: Queue no-resumed event after thread exit Pedro Alves
2022-06-20 22:54 ` [PATCH 19/25] Don't resume new threads if scheduler-locking is in effect Pedro Alves
2022-06-21 11:07 ` Eli Zaretskii
2022-07-11 14:20 ` Pedro Alves
2022-07-11 15:44 ` Eli Zaretskii
2022-07-11 16:09 ` Pedro Alves
2022-07-11 16:30 ` Eli Zaretskii
2022-07-11 16:38 ` Pedro Alves
2022-07-11 17:00 ` Eli Zaretskii
2022-07-11 17:48 ` Pedro Alves
2022-07-11 17:50 ` Eli Zaretskii
2022-07-11 18:18 ` Pedro Alves
2022-07-11 18:29 ` Eli Zaretskii
2022-07-11 19:39 ` Pedro Alves
2022-07-12 16:08 ` Eli Zaretskii
2022-07-12 17:14 ` Pedro Alves
2022-06-20 22:54 ` [PATCH 20/25] Tighten gdb.threads/no-unwaited-for-left.exp regexps Pedro Alves
2022-07-13 21:32 ` Pedro Alves
2022-06-20 22:54 ` [PATCH 21/25] Report thread exit event for leader if reporting thread exit events Pedro Alves
2022-06-20 22:54 ` [PATCH 22/25] Ignore failure to read PC when resuming Pedro Alves
2022-06-20 22:54 ` [PATCH 23/25] gdb/testsuite/lib/my-syscalls.S: Refactor new SYSCALL macro Pedro Alves
2022-06-20 22:54 ` [PATCH 24/25] Testcases for stepping over thread exit syscall (PR gdb/27338) Pedro Alves
2022-06-20 22:54 ` [PATCH 25/25] Document remote clone events, and QThreadOptions packet Pedro Alves
2022-06-21 12:07 ` Eli Zaretskii
2022-07-11 15:19 ` Pedro Alves
2022-07-11 16:09 ` Eli Zaretskii
2022-07-11 16:54 ` Pedro Alves
2022-07-11 17:02 ` Eli Zaretskii
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220620225419.382221-13-pedro@palves.net \
--to=pedro@palves.net \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).