public inbox for gdb-patches@sourceware.org
 help / color / mirror / Atom feed
From: Pedro Alves <pedro@palves.net>
To: gdb-patches@sourceware.org
Subject: [PATCH 18/25] gdbserver: Queue no-resumed event after thread exit
Date: Mon, 20 Jun 2022 23:54:12 +0100	[thread overview]
Message-ID: <20220620225419.382221-19-pedro@palves.net> (raw)
In-Reply-To: <20220620225419.382221-1-pedro@palves.net>

Normally, if the last thread resumed thread on the target exits, the
server sends a no-resumed event to GDB.  If however, GDB enables the
GDB_TO_EXIT option on a thread, and, that thread exits, the server
sends a thread exit event for that thread instead.

In all-stop RSP mode, since events can only be forwarded to GDB one at
a time, and the whole target stops whenever an event is reported, GDB
resumes the target again after getting a THREAD_EXITED event, and then
the server finally reports back a no-resumed event if/when
appropriate.

For non-stop RSP though, events are asynchronous, and if the server
sends a thread-exit event for the last resumed thread, the no-resumed
event is never sent.  This patch makes sure that in non-stop mode, the
server queues a no-resumed event after the thread-exit event if it was
the last resumed thread that exited.

Without this, we'd see failures in step-over-thread-exit testcases
added later in the series, like so:

   continue
   Continuing.
 - No unwaited-for children left.
 - (gdb) PASS: gdb.threads/step-over-thread-exit.exp: displaced-stepping=off: non-stop=on: target-non-stop=on: schedlock=off: ns_stop_all=1: continue stops when thread exits
 + FAIL: gdb.threads/step-over-thread-exit.exp: displaced-stepping=off: non-stop=on: target-non-stop=on: schedlock=off: ns_stop_all=1: continue stops when thread exits (timeout)

(and other similar ones)

Change-Id: I927d78b30f88236dbd5634b051a716f72420e7c7
---
 gdbserver/linux-low.cc | 47 +++++++++++++++++++++++++-----------------
 gdbserver/linux-low.h  |  2 ++
 gdbserver/server.cc    | 12 ++++++++++-
 gdbserver/target.cc    |  6 ++++++
 gdbserver/target.h     |  6 ++++++
 5 files changed, 53 insertions(+), 20 deletions(-)

diff --git a/gdbserver/linux-low.cc b/gdbserver/linux-low.cc
index 8154d8088c1..50aa369ccf0 100644
--- a/gdbserver/linux-low.cc
+++ b/gdbserver/linux-low.cc
@@ -2960,7 +2960,6 @@ linux_process_target::wait_1 (ptid_t ptid, target_waitstatus *ourstatus,
   int report_to_gdb;
   int trace_event;
   int in_step_range;
-  int any_resumed;
 
   threads_debug_printf ("[%s]", target_pid_to_str (ptid).c_str ());
 
@@ -2974,23 +2973,7 @@ linux_process_target::wait_1 (ptid_t ptid, target_waitstatus *ourstatus,
   in_step_range = 0;
   ourstatus->set_ignore ();
 
-  auto status_pending_p_any = [&] (thread_info *thread)
-    {
-      return status_pending_p_callback (thread, minus_one_ptid);
-    };
-
-  auto not_stopped = [&] (thread_info *thread)
-    {
-      return not_stopped_callback (thread, minus_one_ptid);
-    };
-
-  /* Find a resumed LWP, if any.  */
-  if (find_thread (status_pending_p_any) != NULL)
-    any_resumed = 1;
-  else if (find_thread (not_stopped) != NULL)
-    any_resumed = 1;
-  else
-    any_resumed = 0;
+  bool was_any_resumed = any_resumed ();
 
   if (step_over_bkpt == null_ptid)
     pid = wait_for_event (ptid, &w, options);
@@ -3001,7 +2984,7 @@ linux_process_target::wait_1 (ptid_t ptid, target_waitstatus *ourstatus,
       pid = wait_for_event (step_over_bkpt, &w, options & ~WNOHANG);
     }
 
-  if (pid == 0 || (pid == -1 && !any_resumed))
+  if (pid == 0 || (pid == -1 && !was_any_resumed))
     {
       gdb_assert (target_options & TARGET_WNOHANG);
 
@@ -6169,6 +6152,32 @@ linux_process_target::thread_stopped (thread_info *thread)
   return get_thread_lwp (thread)->stopped;
 }
 
+bool
+linux_process_target::any_resumed ()
+{
+  bool any_resumed;
+
+  auto status_pending_p_any = [&] (thread_info *thread)
+    {
+      return status_pending_p_callback (thread, minus_one_ptid);
+    };
+
+  auto not_stopped = [&] (thread_info *thread)
+    {
+      return not_stopped_callback (thread, minus_one_ptid);
+    };
+
+  /* Find a resumed LWP, if any.  */
+  if (find_thread (status_pending_p_any) != NULL)
+    any_resumed = 1;
+  else if (find_thread (not_stopped) != NULL)
+    any_resumed = 1;
+  else
+    any_resumed = 0;
+
+  return any_resumed;
+}
+
 /* This exposes stop-all-threads functionality to other modules.  */
 
 void
diff --git a/gdbserver/linux-low.h b/gdbserver/linux-low.h
index 051a7196ef7..43c35009030 100644
--- a/gdbserver/linux-low.h
+++ b/gdbserver/linux-low.h
@@ -259,6 +259,8 @@ class linux_process_target : public process_stratum_target
 
   bool thread_stopped (thread_info *thread) override;
 
+  bool any_resumed () override;
+
   void pause_all (bool freeze) override;
 
   void unpause_all (bool unfreeze) override;
diff --git a/gdbserver/server.cc b/gdbserver/server.cc
index fc64a442ab4..ea990ebe1d3 100644
--- a/gdbserver/server.cc
+++ b/gdbserver/server.cc
@@ -4740,7 +4740,17 @@ handle_target_event (int err, gdb_client_data client_data)
 	    }
 	}
       else
-	push_stop_notification (cs.last_ptid, cs.last_status);
+	{
+	  push_stop_notification (cs.last_ptid, cs.last_status);
+
+	  if (cs.last_status.kind () == TARGET_WAITKIND_THREAD_EXITED
+	      && !target_any_resumed ())
+	    {
+	      target_waitstatus ws;
+	      ws.set_no_resumed ();
+	      push_stop_notification (null_ptid, ws);
+	    }
+	}
     }
 
   /* Be sure to not change the selected thread behind GDB's back.
diff --git a/gdbserver/target.cc b/gdbserver/target.cc
index ad32af0416e..96c0f49d2dd 100644
--- a/gdbserver/target.cc
+++ b/gdbserver/target.cc
@@ -612,6 +612,12 @@ process_stratum_target::thread_stopped (thread_info *thread)
   gdb_assert_not_reached ("target op thread_stopped not supported");
 }
 
+bool
+process_stratum_target::any_resumed ()
+{
+  return true;
+}
+
 bool
 process_stratum_target::supports_get_tib_address ()
 {
diff --git a/gdbserver/target.h b/gdbserver/target.h
index 0aa7db49c18..dd8a55cf827 100644
--- a/gdbserver/target.h
+++ b/gdbserver/target.h
@@ -323,6 +323,9 @@ class process_stratum_target
   /* Return true if THREAD is known to be stopped now.  */
   virtual bool thread_stopped (thread_info *thread);
 
+  /* Return true if any thread is known to be resumed.  */
+  virtual bool any_resumed ();
+
   /* Return true if the get_tib_address op is supported.  */
   virtual bool supports_get_tib_address ();
 
@@ -683,6 +686,9 @@ target_read_btrace_conf (struct btrace_target_info *tinfo,
 #define target_supports_software_single_step() \
   the_target->supports_software_single_step ()
 
+#define target_any_resumed() \
+  the_target->any_resumed ()
+
 ptid_t mywait (ptid_t ptid, struct target_waitstatus *ourstatus,
 	       target_wait_flags options, int connected_wait);
 
-- 
2.36.0


  parent reply	other threads:[~2022-06-20 22:55 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-20 22:53 [PATCH 00/25] Step over thread clone and " Pedro Alves
2022-06-20 22:53 ` [PATCH 01/25] Don't use pthread_mutex_t in gdb.base/step-over-clone.c Pedro Alves
2022-07-13 21:35   ` Pedro Alves
2022-06-20 22:53 ` [PATCH 02/25] displaced step: pass down target_waitstatus instead of gdb_signal Pedro Alves
2022-06-20 22:53 ` [PATCH 03/25] linux-nat: introduce pending_status_str Pedro Alves
2022-06-20 22:53 ` [PATCH 04/25] Step over clone syscall w/ breakpoint, TARGET_WAITKIND_THREAD_CLONED Pedro Alves
2022-06-20 22:53 ` [PATCH 05/25] Support clone events in the remote protocol Pedro Alves
2022-06-20 22:54 ` [PATCH 06/25] Thread options & clone events (core + remote) Pedro Alves
2022-06-20 22:54 ` [PATCH 07/25] Thread options & clone events (native Linux) Pedro Alves
2022-06-20 22:54 ` [PATCH 08/25] Thread options & clone events (Linux GDBserver) Pedro Alves
2022-06-20 22:54 ` [PATCH 09/25] gdbserver: Hide and don't detach pending clone children Pedro Alves
2022-06-20 22:54 ` [PATCH 10/25] Remove gdb/19675 kfails (displaced stepping + clone) Pedro Alves
2022-06-20 22:54 ` [PATCH 11/25] Add test for stepping over clone syscall Pedro Alves
2022-06-20 22:54 ` [PATCH 12/25] all-stop/synchronous RSP support thread-exit events Pedro Alves
2022-06-20 22:54 ` [PATCH 13/25] Introduce GDB_TO_EXIT thread option, fix step-over-thread-exit Pedro Alves
2022-06-20 22:54 ` [PATCH 14/25] Implement GDB_TO_EXIT support for Linux GDBserver Pedro Alves
2022-06-20 22:54 ` [PATCH 15/25] Implement GDB_TO_EXIT support for native Linux Pedro Alves
2022-06-20 22:54 ` [PATCH 16/25] gdb: clear step over information on thread exit (PR gdb/27338) Pedro Alves
2022-06-20 22:54 ` [PATCH 17/25] stop_all_threads: (re-)enable async before waiting for stops Pedro Alves
2022-06-20 22:54 ` Pedro Alves [this message]
2022-06-20 22:54 ` [PATCH 19/25] Don't resume new threads if scheduler-locking is in effect Pedro Alves
2022-06-21 11:07   ` Eli Zaretskii
2022-07-11 14:20     ` Pedro Alves
2022-07-11 15:44       ` Eli Zaretskii
2022-07-11 16:09         ` Pedro Alves
2022-07-11 16:30           ` Eli Zaretskii
2022-07-11 16:38             ` Pedro Alves
2022-07-11 17:00               ` Eli Zaretskii
2022-07-11 17:48                 ` Pedro Alves
2022-07-11 17:50                   ` Eli Zaretskii
2022-07-11 18:18                     ` Pedro Alves
2022-07-11 18:29                       ` Eli Zaretskii
2022-07-11 19:39                         ` Pedro Alves
2022-07-12 16:08                           ` Eli Zaretskii
2022-07-12 17:14                             ` Pedro Alves
2022-06-20 22:54 ` [PATCH 20/25] Tighten gdb.threads/no-unwaited-for-left.exp regexps Pedro Alves
2022-07-13 21:32   ` Pedro Alves
2022-06-20 22:54 ` [PATCH 21/25] Report thread exit event for leader if reporting thread exit events Pedro Alves
2022-06-20 22:54 ` [PATCH 22/25] Ignore failure to read PC when resuming Pedro Alves
2022-06-20 22:54 ` [PATCH 23/25] gdb/testsuite/lib/my-syscalls.S: Refactor new SYSCALL macro Pedro Alves
2022-06-20 22:54 ` [PATCH 24/25] Testcases for stepping over thread exit syscall (PR gdb/27338) Pedro Alves
2022-06-20 22:54 ` [PATCH 25/25] Document remote clone events, and QThreadOptions packet Pedro Alves
2022-06-21 12:07   ` Eli Zaretskii
2022-07-11 15:19     ` Pedro Alves
2022-07-11 16:09       ` Eli Zaretskii
2022-07-11 16:54         ` Pedro Alves
2022-07-11 17:02           ` Eli Zaretskii

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220620225419.382221-19-pedro@palves.net \
    --to=pedro@palves.net \
    --cc=gdb-patches@sourceware.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).