From: Luis Machado <luis.machado@arm.com>
To: <gdb-patches@sourceware.org>
Cc: <thiago.bauermann@linaro.org>, <simon.marchi@polymtl.ca>
Subject: [PATCH v7 03/18] [gdb/gdbserver] refactor: Simplify SVE interface to read/write registers
Date: Mon, 18 Sep 2023 22:26:36 +0100 [thread overview]
Message-ID: <20230918212651.660141-4-luis.machado@arm.com> (raw)
In-Reply-To: <20230918212651.660141-1-luis.machado@arm.com>
Updates on v4:
- Removed unused return value.
- Fixed buffer overrun in a for loop.
---
This is a patch in preparation to upcoming patches enabling SME support. It
attempts to simplify the gdb/gdbserver shared interface used to read/write
SVE registers.
Where the current code makes use of unique_ptr, allocating a new buffer by
hand and passing a buffer around, this patch makes that code use
gdb::byte_vector and passes a reference to this byte vector to the functions,
allowing the functions to have ready access to the size of the buffer.
It also shares a bit more code between gdb and gdbserver, in particular around
handling of ptrace get/set requests for SVE.
I think gdbserver could be refactored to handle register reads/writes more
like gdb's native layer as opposed to letting the generic linux-low layer do
the ptrace calls. This is not very flexible and assumes one size for the
responses. If you have something like NT_ARM_SVE, where you can have either
FPSIMD or SVE contents, it doesn't work that well.
I didn't want to change that interface right now as it is a bit too much work
and touches all the targets, some of which I can't easily test.
Hence the reason why the buffer the generic linux-now passes down to
linux-aarch64-low is unused or ignored.
No user-visible changes should happen as part of this refactor other than a
slightly reworded warning message.
While doing the refactor, I also noticed what seems to be a mistake in checking
if the register cache contains active (non-zero) SVE data.
For instance, the original code did something like this in
aarch64_sve_regs_copy_from_reg_buf:
has_sve_state |= reg_buf->raw_compare (AARCH64_SVE_Z0_REGNUM + i
reg, sizeof (__int128_t));
"reg" is a zeroed-out buffer that we compare the Z register contents
past the first 128 bits. The problem here is that raw_compare returns
1 if the contents compare the same, which means has_sve_state will be
true. But if we compared the Z register contents to 0, it means we
*do not* have SVE state, and therefore has_sve_state should be false.
The consequence of this mistake is that we convert the initial
FPSIMD-formatted data we get from ptrace for the NT_ARM_SVE register
set to a SVE-formatted one.
In the end, this doesn't cause user-visible differences because the
values of both the Z and V registers will still be the same. But the
logic is not correct.
I used the opportunity to fix this, and it gets tested later on by
the additional SME tests.
I do plan on submitting some SVE-specific tests to make sure we have
a bit more coverage in GDB's testsuite.
Regression-tested on aarch64-linux Ubuntu 22.04/20.04.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
---
gdb/aarch64-linux-nat.c | 30 +---
gdb/nat/aarch64-scalable-linux-ptrace.c | 202 +++++++++++++++---------
gdb/nat/aarch64-scalable-linux-ptrace.h | 27 ++--
gdbserver/linux-aarch64-low.cc | 24 ++-
4 files changed, 173 insertions(+), 110 deletions(-)
diff --git a/gdb/aarch64-linux-nat.c b/gdb/aarch64-linux-nat.c
index 9f32279c0ac..267a1ca0e79 100644
--- a/gdb/aarch64-linux-nat.c
+++ b/gdb/aarch64-linux-nat.c
@@ -319,9 +319,8 @@ store_fpregs_to_thread (const struct regcache *regcache)
static void
fetch_sveregs_from_thread (struct regcache *regcache)
{
- std::unique_ptr<gdb_byte[]> base
- = aarch64_sve_get_sveregs (regcache->ptid ().lwp ());
- aarch64_sve_regs_copy_to_reg_buf (regcache, base.get ());
+ /* Fetch SVE state from the thread and copy it into the register cache. */
+ aarch64_sve_regs_copy_to_reg_buf (regcache->ptid ().lwp (), regcache);
}
/* Store to the current thread the valid sve register
@@ -330,28 +329,9 @@ fetch_sveregs_from_thread (struct regcache *regcache)
static void
store_sveregs_to_thread (struct regcache *regcache)
{
- int ret;
- struct iovec iovec;
- int tid = regcache->ptid ().lwp ();
-
- /* First store vector length to the thread. This is done first to ensure the
- ptrace buffers read from the kernel are the correct size. */
- if (!aarch64_sve_set_vq (tid, regcache))
- perror_with_name (_("Unable to set VG register"));
-
- /* Obtain a dump of SVE registers from ptrace. */
- std::unique_ptr<gdb_byte[]> base = aarch64_sve_get_sveregs (tid);
-
- /* Overwrite with regcache state. */
- aarch64_sve_regs_copy_from_reg_buf (regcache, base.get ());
-
- /* Write back to the kernel. */
- iovec.iov_base = base.get ();
- iovec.iov_len = ((struct user_sve_header *) base.get ())->size;
- ret = ptrace (PTRACE_SETREGSET, tid, NT_ARM_SVE, &iovec);
-
- if (ret < 0)
- perror_with_name (_("Unable to store sve registers"));
+ /* Fetch SVE state from the register cache and update the thread TID with
+ it. */
+ aarch64_sve_regs_copy_from_reg_buf (regcache->ptid ().lwp (), regcache);
}
/* Fill GDB's register array with the pointer authentication mask values from
diff --git a/gdb/nat/aarch64-scalable-linux-ptrace.c b/gdb/nat/aarch64-scalable-linux-ptrace.c
index cc43f510892..6eea9104cef 100644
--- a/gdb/nat/aarch64-scalable-linux-ptrace.c
+++ b/gdb/nat/aarch64-scalable-linux-ptrace.c
@@ -120,28 +120,43 @@ aarch64_sve_set_vq (int tid, struct reg_buffer_common *reg_buf)
/* See nat/aarch64-scalable-linux-ptrace.h. */
-std::unique_ptr<gdb_byte[]>
-aarch64_sve_get_sveregs (int tid)
+gdb::byte_vector
+aarch64_fetch_sve_regset (int tid)
{
- struct iovec iovec;
uint64_t vq = aarch64_sve_get_vq (tid);
if (vq == 0)
- perror_with_name (_("Unable to fetch SVE register header"));
+ perror_with_name (_("Unable to fetch SVE vector length"));
/* A ptrace call with NT_ARM_SVE will return a header followed by either a
dump of all the SVE and FP registers, or an fpsimd structure (identical to
the one returned by NT_FPREGSET) if the kernel has not yet executed any
SVE code. Make sure we allocate enough space for a full SVE dump. */
- iovec.iov_len = SVE_PT_SIZE (vq, SVE_PT_REGS_SVE);
- std::unique_ptr<gdb_byte[]> buf (new gdb_byte[iovec.iov_len]);
- iovec.iov_base = buf.get ();
+ gdb::byte_vector sve_state (SVE_PT_SIZE (vq, SVE_PT_REGS_SVE), 0);
+
+ struct iovec iovec;
+ iovec.iov_base = sve_state.data ();
+ iovec.iov_len = sve_state.size ();
if (ptrace (PTRACE_GETREGSET, tid, NT_ARM_SVE, &iovec) < 0)
perror_with_name (_("Unable to fetch SVE registers"));
- return buf;
+ return sve_state;
+}
+
+/* See nat/aarch64-scalable-linux-ptrace.h. */
+
+void
+aarch64_store_sve_regset (int tid, const gdb::byte_vector &sve_state)
+{
+ struct iovec iovec;
+ /* We need to cast from (const void *) here. */
+ iovec.iov_base = (void *) sve_state.data ();
+ iovec.iov_len = sve_state.size ();
+
+ if (ptrace (PTRACE_SETREGSET, tid, NT_ARM_SVE, &iovec) < 0)
+ perror_with_name (_("Unable to store SVE registers"));
}
/* If we are running in BE mode, byteswap the contents
@@ -165,11 +180,13 @@ aarch64_maybe_swab128 (gdb_byte *dst, const gdb_byte *src, size_t size)
/* See nat/aarch64-scalable-linux-ptrace.h. */
void
-aarch64_sve_regs_copy_to_reg_buf (struct reg_buffer_common *reg_buf,
- const void *buf)
+aarch64_sve_regs_copy_to_reg_buf (int tid, struct reg_buffer_common *reg_buf)
{
- char *base = (char *) buf;
- struct user_sve_header *header = (struct user_sve_header *) buf;
+ gdb::byte_vector sve_state = aarch64_fetch_sve_regset (tid);
+
+ char *base = (char *) sve_state.data ();
+ struct user_sve_header *header
+ = (struct user_sve_header *) sve_state.data ();
uint64_t vq = sve_vq_from_vl (header->vl);
uint64_t vg = sve_vg_from_vl (header->vl);
@@ -249,18 +266,33 @@ aarch64_sve_regs_copy_to_reg_buf (struct reg_buffer_common *reg_buf,
reg_buf->raw_supply (AARCH64_SVE_FFR_REGNUM, reg);
}
+
+ /* At this point we have updated the register cache with the contents of
+ the NT_ARM_SVE register set. */
}
/* See nat/aarch64-scalable-linux-ptrace.h. */
void
-aarch64_sve_regs_copy_from_reg_buf (const struct reg_buffer_common *reg_buf,
- void *buf)
+aarch64_sve_regs_copy_from_reg_buf (int tid,
+ struct reg_buffer_common *reg_buf)
{
- struct user_sve_header *header = (struct user_sve_header *) buf;
- char *base = (char *) buf;
+ /* First store the vector length to the thread. This is done first to
+ ensure the ptrace buffers read from the kernel are the correct size. */
+ if (!aarch64_sve_set_vq (tid, reg_buf))
+ perror_with_name (_("Unable to set VG register"));
+
+ /* Obtain a dump of SVE registers from ptrace. */
+ gdb::byte_vector sve_state = aarch64_fetch_sve_regset (tid);
+
+ struct user_sve_header *header = (struct user_sve_header *) sve_state.data ();
uint64_t vq = sve_vq_from_vl (header->vl);
+ gdb::byte_vector new_state (SVE_PT_SIZE (32, SVE_PT_REGS_SVE), 0);
+ memcpy (new_state.data (), sve_state.data (), sve_state.size ());
+ header = (struct user_sve_header *) new_state.data ();
+ char *base = (char *) new_state.data ();
+
/* Sanity check the data in the header. */
if (!sve_vl_valid (header->vl)
|| SVE_PT_SIZE (vq, header->flags) != header->size)
@@ -275,36 +307,40 @@ aarch64_sve_regs_copy_from_reg_buf (const struct reg_buffer_common *reg_buf,
resulting in the initialization of SVE state written back to the
kernel, which is why we try to avoid it. */
- bool has_sve_state = false;
- gdb_byte *reg = (gdb_byte *) alloca (SVE_PT_SVE_ZREG_SIZE (vq));
- struct user_fpsimd_state *fpsimd
- = (struct user_fpsimd_state *)(base + SVE_PT_FPSIMD_OFFSET);
-
- memset (reg, 0, SVE_PT_SVE_ZREG_SIZE (vq));
+ /* Buffer (using the maximum size a Z register) used to look for zeroed
+ out sve state. */
+ gdb_byte reg[256];
+ memset (reg, 0, sizeof (reg));
/* Check in the reg_buf if any of the Z registers are set after the
first 128 bits, or if any of the other SVE registers are set. */
-
+ bool has_sve_state = false;
for (int i = 0; i < AARCH64_SVE_Z_REGS_NUM; i++)
{
- has_sve_state |= reg_buf->raw_compare (AARCH64_SVE_Z0_REGNUM + i,
- reg, sizeof (__int128_t));
- if (has_sve_state)
- break;
+ if (!reg_buf->raw_compare (AARCH64_SVE_Z0_REGNUM + i, reg,
+ V_REGISTER_SIZE))
+ {
+ has_sve_state = true;
+ break;
+ }
}
if (!has_sve_state)
for (int i = 0; i < AARCH64_SVE_P_REGS_NUM; i++)
{
- has_sve_state |= reg_buf->raw_compare (AARCH64_SVE_P0_REGNUM + i,
- reg, 0);
- if (has_sve_state)
- break;
+ if (!reg_buf->raw_compare (AARCH64_SVE_P0_REGNUM + i, reg, 0))
+ {
+ has_sve_state = true;
+ break;
+ }
}
if (!has_sve_state)
- has_sve_state |= reg_buf->raw_compare (AARCH64_SVE_FFR_REGNUM,
- reg, 0);
+ has_sve_state
+ = !reg_buf->raw_compare (AARCH64_SVE_FFR_REGNUM, reg, 0);
+
+ struct user_fpsimd_state *fpsimd
+ = (struct user_fpsimd_state *)(base + SVE_PT_FPSIMD_OFFSET);
/* If no SVE state exists, then use the existing fpsimd structure to
write out state and return. */
@@ -344,50 +380,74 @@ aarch64_sve_regs_copy_from_reg_buf (const struct reg_buffer_common *reg_buf,
if (REG_VALID == reg_buf->get_register_status (AARCH64_FPCR_REGNUM))
reg_buf->raw_collect (AARCH64_FPCR_REGNUM, &fpsimd->fpcr);
- return;
- }
-
- /* Otherwise, reformat the fpsimd structure into a full SVE set, by
- expanding the V registers (working backwards so we don't splat
- registers before they are copied) and using null for everything else.
- Note that enough space for a full SVE dump was originally allocated
- for base. */
+ /* At this point we have collected all the data from the register
+ cache and we are ready to update the FPSIMD register content
+ of the thread. */
- header->flags |= SVE_PT_REGS_SVE;
- header->size = SVE_PT_SIZE (vq, SVE_PT_REGS_SVE);
+ /* Fall through so we can update the thread's contents with the
+ FPSIMD register cache values. */
+ }
+ else
+ {
+ /* Otherwise, reformat the fpsimd structure into a full SVE set, by
+ expanding the V registers (working backwards so we don't splat
+ registers before they are copied) and using zero for everything
+ else.
+ Note that enough space for a full SVE dump was originally allocated
+ for base. */
+
+ header->flags |= SVE_PT_REGS_SVE;
+ header->size = SVE_PT_SIZE (vq, SVE_PT_REGS_SVE);
+
+ memcpy (base + SVE_PT_SVE_FPSR_OFFSET (vq), &fpsimd->fpsr,
+ sizeof (uint32_t));
+ memcpy (base + SVE_PT_SVE_FPCR_OFFSET (vq), &fpsimd->fpcr,
+ sizeof (uint32_t));
+
+ for (int i = AARCH64_SVE_Z_REGS_NUM - 1; i >= 0 ; i--)
+ {
+ memcpy (base + SVE_PT_SVE_ZREG_OFFSET (vq, i), &fpsimd->vregs[i],
+ sizeof (__int128_t));
+ }
- memcpy (base + SVE_PT_SVE_FPSR_OFFSET (vq), &fpsimd->fpsr,
- sizeof (uint32_t));
- memcpy (base + SVE_PT_SVE_FPCR_OFFSET (vq), &fpsimd->fpcr,
- sizeof (uint32_t));
+ /* At this point we have converted the FPSIMD layout to an SVE
+ layout and copied the register data.
- for (int i = AARCH64_SVE_Z_REGS_NUM; i >= 0 ; i--)
- {
- memcpy (base + SVE_PT_SVE_ZREG_OFFSET (vq, i), &fpsimd->vregs[i],
- sizeof (__int128_t));
+ Fall through so we can update the thread's contents with the SVE
+ register cache values. */
}
}
+ else
+ {
+ /* We already have SVE state for this thread, so we just need to update
+ the values of the registers. */
+ for (int i = 0; i < AARCH64_SVE_Z_REGS_NUM; i++)
+ if (REG_VALID == reg_buf->get_register_status (AARCH64_SVE_Z0_REGNUM
+ + i))
+ reg_buf->raw_collect (AARCH64_SVE_Z0_REGNUM + i,
+ base + SVE_PT_SVE_ZREG_OFFSET (vq, i));
- /* Replace the kernel values with those from reg_buf. */
-
- for (int i = 0; i < AARCH64_SVE_Z_REGS_NUM; i++)
- if (REG_VALID == reg_buf->get_register_status (AARCH64_SVE_Z0_REGNUM + i))
- reg_buf->raw_collect (AARCH64_SVE_Z0_REGNUM + i,
- base + SVE_PT_SVE_ZREG_OFFSET (vq, i));
-
- for (int i = 0; i < AARCH64_SVE_P_REGS_NUM; i++)
- if (REG_VALID == reg_buf->get_register_status (AARCH64_SVE_P0_REGNUM + i))
- reg_buf->raw_collect (AARCH64_SVE_P0_REGNUM + i,
- base + SVE_PT_SVE_PREG_OFFSET (vq, i));
+ for (int i = 0; i < AARCH64_SVE_P_REGS_NUM; i++)
+ if (REG_VALID == reg_buf->get_register_status (AARCH64_SVE_P0_REGNUM
+ + i))
+ reg_buf->raw_collect (AARCH64_SVE_P0_REGNUM + i,
+ base + SVE_PT_SVE_PREG_OFFSET (vq, i));
+
+ if (REG_VALID == reg_buf->get_register_status (AARCH64_SVE_FFR_REGNUM))
+ reg_buf->raw_collect (AARCH64_SVE_FFR_REGNUM,
+ base + SVE_PT_SVE_FFR_OFFSET (vq));
+ if (REG_VALID == reg_buf->get_register_status (AARCH64_FPSR_REGNUM))
+ reg_buf->raw_collect (AARCH64_FPSR_REGNUM,
+ base + SVE_PT_SVE_FPSR_OFFSET (vq));
+ if (REG_VALID == reg_buf->get_register_status (AARCH64_FPCR_REGNUM))
+ reg_buf->raw_collect (AARCH64_FPCR_REGNUM,
+ base + SVE_PT_SVE_FPCR_OFFSET (vq));
+ }
- if (REG_VALID == reg_buf->get_register_status (AARCH64_SVE_FFR_REGNUM))
- reg_buf->raw_collect (AARCH64_SVE_FFR_REGNUM,
- base + SVE_PT_SVE_FFR_OFFSET (vq));
- if (REG_VALID == reg_buf->get_register_status (AARCH64_FPSR_REGNUM))
- reg_buf->raw_collect (AARCH64_FPSR_REGNUM,
- base + SVE_PT_SVE_FPSR_OFFSET (vq));
- if (REG_VALID == reg_buf->get_register_status (AARCH64_FPCR_REGNUM))
- reg_buf->raw_collect (AARCH64_FPCR_REGNUM,
- base + SVE_PT_SVE_FPCR_OFFSET (vq));
+ /* At this point we have collected all the data from the register cache and
+ we are ready to update the SVE/FPSIMD register contents of the thread.
+ sve_state should contain all the data in the correct format, ready to be
+ passed on to ptrace. */
+ aarch64_store_sve_regset (tid, new_state);
}
diff --git a/gdb/nat/aarch64-scalable-linux-ptrace.h b/gdb/nat/aarch64-scalable-linux-ptrace.h
index 2847c4e0263..167782c493d 100644
--- a/gdb/nat/aarch64-scalable-linux-ptrace.h
+++ b/gdb/nat/aarch64-scalable-linux-ptrace.h
@@ -52,22 +52,27 @@ uint64_t aarch64_sve_get_vq (int tid);
bool aarch64_sve_set_vq (int tid, uint64_t vq);
bool aarch64_sve_set_vq (int tid, struct reg_buffer_common *reg_buf);
-/* Read the current SVE register set using ptrace, allocating space as
- required. */
+/* Read the current SVE register set from thread TID and return its data
+ through a byte vector. */
-extern std::unique_ptr<gdb_byte[]> aarch64_sve_get_sveregs (int tid);
+extern gdb::byte_vector aarch64_fetch_sve_regset (int tid);
-/* Put the registers from linux structure buf into register buffer. Assumes the
- vector lengths in the register buffer match the size in the kernel. */
+/* Write the SVE contents from SVE_STATE to thread TID. */
-extern void aarch64_sve_regs_copy_to_reg_buf (struct reg_buffer_common *reg_buf,
- const void *buf);
+extern void
+aarch64_store_sve_regset (int tid, const gdb::byte_vector &sve_state);
+
+/* Given a thread id TID and a register buffer REG_BUF, update the register
+ buffer with the SVE state from thread TID. */
+
+extern void
+aarch64_sve_regs_copy_to_reg_buf (int tid, struct reg_buffer_common *reg_buf);
-/* Put the registers from register buffer into linux structure buf. Assumes the
- vector lengths in the register buffer match the size in the kernel. */
+/* Given a thread id TID and a register buffer REG_BUF containing SVE
+ register data, write the SVE data to thread TID. */
extern void
-aarch64_sve_regs_copy_from_reg_buf (const struct reg_buffer_common *reg_buf,
- void *buf);
+aarch64_sve_regs_copy_from_reg_buf (int tid,
+ struct reg_buffer_common *reg_buf);
#endif /* NAT_AARCH64_SCALABLE_LINUX_PTRACE_H */
diff --git a/gdbserver/linux-aarch64-low.cc b/gdbserver/linux-aarch64-low.cc
index 8b22f1979d6..7c633c212f3 100644
--- a/gdbserver/linux-aarch64-low.cc
+++ b/gdbserver/linux-aarch64-low.cc
@@ -719,9 +719,18 @@ aarch64_target::low_new_fork (process_info *parent,
/* Wrapper for aarch64_sve_regs_copy_to_reg_buf. */
static void
-aarch64_sve_regs_copy_to_regcache (struct regcache *regcache, const void *buf)
+aarch64_sve_regs_copy_to_regcache (struct regcache *regcache,
+ ATTRIBUTE_UNUSED const void *buf)
{
- return aarch64_sve_regs_copy_to_reg_buf (regcache, buf);
+ /* BUF is unused here since we collect the data straight from a ptrace
+ request in aarch64_sve_regs_copy_to_reg_buf, therefore bypassing
+ gdbserver's own call to ptrace. */
+
+ int tid = lwpid_of (current_thread);
+
+ /* Update the register cache. aarch64_sve_regs_copy_to_reg_buf handles
+ fetching the NT_ARM_SVE state from thread TID. */
+ aarch64_sve_regs_copy_to_reg_buf (tid, regcache);
}
/* Wrapper for aarch64_sve_regs_copy_from_reg_buf. */
@@ -729,7 +738,16 @@ aarch64_sve_regs_copy_to_regcache (struct regcache *regcache, const void *buf)
static void
aarch64_sve_regs_copy_from_regcache (struct regcache *regcache, void *buf)
{
- return aarch64_sve_regs_copy_from_reg_buf (regcache, buf);
+ int tid = lwpid_of (current_thread);
+
+ /* Update the thread SVE state. aarch64_sve_regs_copy_from_reg_buf
+ handles writing the SVE/FPSIMD state back to thread TID. */
+ aarch64_sve_regs_copy_from_reg_buf (tid, regcache);
+
+ /* We need to return the expected data in BUF, so copy whatever the kernel
+ already has to BUF. */
+ gdb::byte_vector sve_state = aarch64_fetch_sve_regset (tid);
+ memcpy (buf, sve_state.data (), sve_state.size ());
}
/* Array containing all the possible register sets for AArch64/Linux. During
--
2.25.1
next prev parent reply other threads:[~2023-09-18 21:27 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-18 21:26 [PATCH v7 00/18] SME support for AArch64 gdb/gdbserver on Linux Luis Machado
2023-09-18 21:26 ` [PATCH v7 01/18] [gdb/aarch64] Fix register fetch/store order for native AArch64 Linux Luis Machado
2023-09-18 21:26 ` [PATCH v7 02/18] [gdb/aarch64] refactor: Rename SVE-specific files Luis Machado
2023-09-18 21:26 ` Luis Machado [this message]
2023-09-18 21:26 ` [PATCH v7 04/18] [gdb/aarch64] sve: Fix return command when using V registers in a SVE-enabled target Luis Machado
2023-09-18 21:26 ` [PATCH v7 05/18] [gdb/aarch64] sme: Enable SME registers and pseudo-registers Luis Machado
2023-10-13 13:06 ` Tom Tromey
2023-10-13 14:44 ` Luis Machado
2023-10-13 14:50 ` Luis Machado
2023-09-18 21:26 ` [PATCH v7 06/18] [gdbserver/generic] Convert tdesc's expedite_regs to a string vector Luis Machado
2023-09-18 21:26 ` [PATCH v7 07/18] [gdbserver/aarch64] refactor: Adjust expedited registers dynamically Luis Machado
2023-09-18 21:26 ` [PATCH v7 08/18] [gdbserver/aarch64] sme: Add support for SME Luis Machado
2023-09-18 21:26 ` [PATCH v7 09/18] [gdb/aarch64] sve: Fix signal frame z/v register restore Luis Machado
2023-09-18 21:26 ` [PATCH v7 10/18] [gdb/aarch64] sme: Signal frame support Luis Machado
2023-09-18 21:26 ` [PATCH v7 11/18] [gdb/aarch64] sme: Fixup sigframe gdbarch when vg/svg changes Luis Machado
2023-09-18 21:26 ` [PATCH v7 12/18] [gdb/aarch64] sme: Support TPIDR2 signal frame context Luis Machado
2023-09-18 21:26 ` [PATCH v7 13/18] [gdb/generic] Get rid of linux-core-thread-data Luis Machado
2023-09-18 21:26 ` [PATCH v7 14/18] [gdb/generic] corefile/bug: Use thread-specific gdbarch when dumping register state to core files Luis Machado
2023-09-18 21:26 ` [PATCH v7 15/18] [gdb/generic] corefile/bug: Add hook to control the use of target description notes from corefiles Luis Machado
2023-09-19 20:49 ` Simon Marchi
2023-09-20 5:49 ` Luis Machado
2023-09-20 14:01 ` Luis Machado
2023-09-20 14:22 ` Andrew Burgess
2023-09-20 15:26 ` Andrew Burgess
2023-09-20 23:35 ` Luis Machado
2023-09-21 10:02 ` Andrew Burgess
2023-09-21 10:44 ` Luis Machado
2023-09-25 9:57 ` Andrew Burgess
2023-09-26 12:39 ` Luis Machado
2023-09-27 17:56 ` Andrew Burgess
2023-09-28 8:23 ` Luis Machado
2023-10-03 17:23 ` Andrew Burgess
2023-10-04 15:27 ` Luis Machado
2023-09-25 15:41 ` Simon Marchi
2023-09-27 17:44 ` Andrew Burgess
2023-09-18 21:26 ` [PATCH v7 16/18] [gdb/aarch64] sme: Core file support for Linux Luis Machado
2023-09-18 21:26 ` [PATCH v7 17/18] [gdb/testsuite] sme: Add SVE/SME testcases Luis Machado
2023-09-19 19:12 ` Simon Marchi
2023-09-19 20:02 ` Luis Machado
2023-09-18 21:26 ` [PATCH v7 18/18] [gdb/docs] sme: Document SME registers and features Luis Machado
2023-10-04 15:27 ` [PATCH v7 00/18] SME support for AArch64 gdb/gdbserver on Linux Luis Machado
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230918212651.660141-4-luis.machado@arm.com \
--to=luis.machado@arm.com \
--cc=gdb-patches@sourceware.org \
--cc=simon.marchi@polymtl.ca \
--cc=thiago.bauermann@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).