* Problem with Insight GUI
@ 2003-08-20 5:39 Venkatesh M R
2003-08-20 14:47 ` Keith Seitz
0 siblings, 1 reply; 3+ messages in thread
From: Venkatesh M R @ 2003-08-20 5:39 UTC (permalink / raw)
To: insight
Hello,
I had insight-5.1.1 and Insight-5.2.1 (configured as arm-elf gdb)
working on my Redhat 7.1 PC.
but few days back, I had installed an RPM based arm-elf packege specific
to a board.
since then GUI does not come UP.
but it works fine on CLI (ie with -nw option).
if I use pc based gdb to debug
the result is "Program exited normally"
Can any one help me how to come out of this problem.
Best Regards,
Venkatesh M R
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Problem with Insight GUI
2003-08-20 5:39 Problem with Insight GUI Venkatesh M R
@ 2003-08-20 14:47 ` Keith Seitz
2003-08-21 5:29 ` Venkatesh M R
0 siblings, 1 reply; 3+ messages in thread
From: Keith Seitz @ 2003-08-20 14:47 UTC (permalink / raw)
To: Venkatesh M R; +Cc: insight
On Tue, 2003-08-19 at 22:42, Venkatesh M R wrote:
> Hello,
> I had insight-5.1.1 and Insight-5.2.1 (configured as arm-elf gdb)
> working on my Redhat 7.1 PC.
> but few days back, I had installed an RPM based arm-elf packege specific
> to a board.
> since then GUI does not come UP.
> but it works fine on CLI (ie with -nw option).
What's in the package list for the RPM? Where did you install insight?
Which version of insight are you now trying to run? 5.2.1? Try this:
Set GDBTK_DEBUG > 0 and running insight. You should get a logfile
"insight.log". If not, then initialization is going wrong. My guess
would be an incompatible Tcl/Tk...
Keith
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Problem with Insight GUI
2003-08-20 14:47 ` Keith Seitz
@ 2003-08-21 5:29 ` Venkatesh M R
0 siblings, 0 replies; 3+ messages in thread
From: Venkatesh M R @ 2003-08-21 5:29 UTC (permalink / raw)
To: Keith Seitz; +Cc: insight
Hello Keith,
Thanks A lot for that tip ("Set GDBTK_DEBUG > 0")
Its working now, all I had to do was delete ".gdbtkinit" file :-o),
Best Regards & Thanks,
Venkatesh M R
----- Original Message -----
From: Keith Seitz <keiths@redhat.com>
To: Venkatesh M R <venkatesh@multitech.co.in>
Cc: <insight@sources.redhat.com>
Sent: Wednesday, August 20, 2003 8:19 PM
Subject: Re: Problem with Insight GUI
> On Tue, 2003-08-19 at 22:42, Venkatesh M R wrote:
> > Hello,
> > I had insight-5.1.1 and Insight-5.2.1 (configured as arm-elf gdb)
> > working on my Redhat 7.1 PC.
> > but few days back, I had installed an RPM based arm-elf packege specific
> > to a board.
> > since then GUI does not come UP.
> > but it works fine on CLI (ie with -nw option).
>
> What's in the package list for the RPM? Where did you install insight?
> Which version of insight are you now trying to run? 5.2.1? Try this:
>
> Set GDBTK_DEBUG > 0 and running insight. You should get a logfile
> "insight.log". If not, then initialization is going wrong. My guess
> would be an incompatible Tcl/Tk...
>
> Keith
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-08-21 5:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-08-20 5:39 Problem with Insight GUI Venkatesh M R
2003-08-20 14:47 ` Keith Seitz
2003-08-21 5:29 ` Venkatesh M R
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).