* [PATCH] arm: Remove ununsed ARM code in optimized implementation
@ 2018-04-16 11:22 Adhemerval Zanella
2018-04-16 14:55 ` Phil Blundell
0 siblings, 1 reply; 3+ messages in thread
From: Adhemerval Zanella @ 2018-04-16 11:22 UTC (permalink / raw)
To: libc-alpha
This patch removes the ununsed ARM code path for armv6t2 memchr and
strlen and armv7 memch and strcmp. In all implementations, the ARM
code is not used in any possible build (unless glibc is explicit
build with the non-documented NO_THUMB define) and for armv7
the resulting code either produces wrong results (memchr) and throw
build error (strcmp).
Checked on arm-linux-gnueabihf built targeting both armv6 and
armv7.
* sysdeps/arm/armv6t2/memchr.S (memchr): Remove ARM code path.
* sysdeps/arm/armv6t2/strlen.S (memchr): Likewise.
* sysdeps/arm/armv7/multiarch/memchr_neon.S (memchr): Likewise.
* sysdeps/arm/armv7/strcmp.S (strcmp): Likewise.
---
ChangeLog | 7 +++++++
sysdeps/arm/armv6t2/memchr.S | 23 -----------------------
sysdeps/arm/armv6t2/strlen.S | 25 +------------------------
sysdeps/arm/armv7/multiarch/memchr_neon.S | 16 ----------------
sysdeps/arm/armv7/strcmp.S | 23 -----------------------
5 files changed, 8 insertions(+), 86 deletions(-)
diff --git a/sysdeps/arm/armv6t2/memchr.S b/sysdeps/arm/armv6t2/memchr.S
index bdd385b..1d6eee0 100644
--- a/sysdeps/arm/armv6t2/memchr.S
+++ b/sysdeps/arm/armv6t2/memchr.S
@@ -42,12 +42,8 @@
.syntax unified
.text
-#ifdef NO_THUMB
- .arm
-#else
.thumb
.thumb_func
-#endif
.global memchr
.type memchr,%function
ENTRY(memchr)
@@ -91,22 +87,14 @@ ENTRY(memchr)
15:
ldrd r4,r5, [r0],#8
-#ifndef NO_THUMB
subs r6, r6, #8
-#endif
eor r4,r4, r1 @ Get it so that r4,r5 have 00's where the bytes match the target
eor r5,r5, r1
uadd8 r4, r4, r7 @ Parallel add 0xff - sets the GE bits for anything that wasn't 0
sel r4, r3, r7 @ bytes are 00 for none-00 bytes, or ff for 00 bytes - NOTE INVERSION
uadd8 r5, r5, r7 @ Parallel add 0xff - sets the GE bits for anything that wasn't 0
sel r5, r4, r7 @ chained....bytes are 00 for none-00 bytes, or ff for 00 bytes - NOTE INVERSION
-#ifndef NO_THUMB
cbnz r5, 60f
-#else
- cmp r5, #0
- bne 60f
- subs r6, r6, #8
-#endif
bne 15b @ (Flags from the subs above) If not run out of bytes then go around again
pop {r4,r5,r6,r7}
@@ -120,24 +108,13 @@ ENTRY(memchr)
and r2,r2,#7 @ Leave the count remaining as the number after the double words have been done
20:
-#ifndef NO_THUMB
cbz r2, 40f @ 0 length or hit the end already then not found
-#else
- cmp r2, #0
- beq 40f
-#endif
21: @ Post aligned section, or just a short call
ldrb r3,[r0],#1
-#ifndef NO_THUMB
subs r2,r2,#1
eor r3,r3,r1 @ r3 = 0 if match - doesn't break flags from sub
cbz r3, 50f
-#else
- eors r3, r3, r1
- beq 50f
- subs r2, r2, #1
-#endif
bne 21b @ on r2 flags
40:
diff --git a/sysdeps/arm/armv6t2/strlen.S b/sysdeps/arm/armv6t2/strlen.S
index 6988183..a34ef20 100644
--- a/sysdeps/arm/armv6t2/strlen.S
+++ b/sysdeps/arm/armv6t2/strlen.S
@@ -21,7 +21,7 @@
*/
-#include <arm-features.h> /* This might #define NO_THUMB. */
+#include <arm-features.h>
#include <sysdep.h>
#ifdef __ARMEB__
@@ -32,24 +32,8 @@
#define S2HI lsl
#endif
-#ifndef NO_THUMB
/* This code is best on Thumb. */
.thumb
-#else
-/* Using bne.w explicitly is desirable in Thumb mode because it helps
- align the following label without a nop. In ARM mode there is no
- such difference. */
-.macro bne.w label
- bne \label
-.endm
-
-/* This clobbers the condition codes, which the real Thumb cbnz instruction
- does not do. But it doesn't matter for any of the uses here. */
-.macro cbnz reg, label
- cmp \reg, #0
- bne \label
-.endm
-#endif
/* Parameters and result. */
#define srcin r0
@@ -146,16 +130,9 @@ ENTRY(strlen)
tst tmp1, #4
pld [src, #64]
S2HI tmp2, const_m1, tmp2
-#ifdef NO_THUMB
- mvn tmp1, tmp2
- orr data1a, data1a, tmp1
- itt ne
- orrne data1b, data1b, tmp1
-#else
orn data1a, data1a, tmp2
itt ne
ornne data1b, data1b, tmp2
-#endif
movne data1a, const_m1
mov const_0, #0
b .Lstart_realigned
diff --git a/sysdeps/arm/armv7/multiarch/memchr_neon.S b/sysdeps/arm/armv7/multiarch/memchr_neon.S
index 1b2ae75..6fbf9b8 100644
--- a/sysdeps/arm/armv7/multiarch/memchr_neon.S
+++ b/sysdeps/arm/armv7/multiarch/memchr_neon.S
@@ -68,11 +68,7 @@
* allows to identify exactly which byte has matched.
*/
-#ifndef NO_THUMB
.thumb_func
-#else
- .arm
-#endif
.p2align 4,,15
ENTRY(memchr)
@@ -132,12 +128,7 @@ ENTRY(memchr)
/* The first block can also be the last */
bls .Lmasklast
/* Have we found something already? */
-#ifndef NO_THUMB
cbnz synd, .Ltail
-#else
- cmp synd, #0
- bne .Ltail
-#endif
.Lloopintro:
@@ -176,16 +167,9 @@ ENTRY(memchr)
vpadd.i8 vdata0_0, vdata0_0, vdata1_0
vpadd.i8 vdata0_0, vdata0_0, vdata0_0
vmov synd, vdata0_0[0]
-#ifndef NO_THUMB
cbz synd, .Lnotfound
bhi .Ltail /* Uses the condition code from
subs cntin, cntin, #32 above. */
-#else
- cmp synd, #0
- beq .Lnotfound
- cmp cntin, #0
- bhi .Ltail
-#endif
.Lmasklast:
diff --git a/sysdeps/arm/armv7/strcmp.S b/sysdeps/arm/armv7/strcmp.S
index 060b865..2626fdf 100644
--- a/sysdeps/arm/armv7/strcmp.S
+++ b/sysdeps/arm/armv7/strcmp.S
@@ -83,8 +83,6 @@
#define syndrome tmp2
-#ifndef NO_THUMB
-/* This code is best on Thumb. */
.thumb
/* In Thumb code we can't use MVN with a register shift, but we do have ORN. */
@@ -94,27 +92,6 @@
.macro apply_mask data_reg, mask_reg
orn \data_reg, \data_reg, \mask_reg
.endm
-#else
-/* In ARM code we don't have ORN, but we can use MVN with a register shift. */
-.macro prepare_mask mask_reg, nbits_reg
- mvn \mask_reg, const_m1, S2HI \nbits_reg
-.endm
-.macro apply_mask data_reg, mask_reg
- orr \data_reg, \data_reg, \mask_reg
-.endm
-
-/* These clobber the condition codes, which the real Thumb cbz/cbnz
- instructions do not. But it doesn't matter for any of the uses here. */
-.macro cbz reg, label
- cmp \reg, #0
- beq \label
-.endm
-.macro cbnz reg, label
- cmp \reg, #0
- bne \label
-.endm
-#endif
-
/* Macro to compute and return the result value for word-aligned
cases. */
--
2.7.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm: Remove ununsed ARM code in optimized implementation
2018-04-16 11:22 [PATCH] arm: Remove ununsed ARM code in optimized implementation Adhemerval Zanella
@ 2018-04-16 14:55 ` Phil Blundell
2018-04-16 18:07 ` Adhemerval Zanella
0 siblings, 1 reply; 3+ messages in thread
From: Phil Blundell @ 2018-04-16 14:55 UTC (permalink / raw)
To: Adhemerval Zanella, libc-alpha
On Mon, 2018-04-16 at 08:22 -0300, Adhemerval Zanella wrote:
> This patch removes the ununsed ARM code path for armv6t2 memchr and
> strlen and armv7 memch and strcmp. In all implementations, the ARM
> code is not used in any possible build (unless glibc is explicit
> build with the non-documented NO_THUMB define) and for armv7
> the resulting code either produces wrong results (memchr) and throw
> build error (strcmp).
Thanks, looks good to me.
> Checked on arm-linux-gnueabihf built targeting both armv6 and
> armv7.
Can you confirm there were no changes in the generated binaries?
p.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] arm: Remove ununsed ARM code in optimized implementation
2018-04-16 14:55 ` Phil Blundell
@ 2018-04-16 18:07 ` Adhemerval Zanella
0 siblings, 0 replies; 3+ messages in thread
From: Adhemerval Zanella @ 2018-04-16 18:07 UTC (permalink / raw)
To: Phil Blundell, libc-alpha
On 16/04/2018 11:55, Phil Blundell wrote:
> On Mon, 2018-04-16 at 08:22 -0300, Adhemerval Zanella wrote:
>> This patch removes the ununsed ARM code path for armv6t2 memchr and
>> strlen and armv7 memch and strcmp. In all implementations, the ARM
>> code is not used in any possible build (unless glibc is explicit
>> build with the non-documented NO_THUMB define) and for armv7
>> the resulting code either produces wrong results (memchr) and throw
>> build error (strcmp).
>
> Thanks, looks good to me.
>
>> Checked on arm-linux-gnueabihf built targeting both armv6 and
>> armv7.
>
> Can you confirm there were no changes in the generated binaries?
>
> p.
I saw no different on shared libraries built with and without this
patch. I will apply this patch shortly.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-04-16 18:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-04-16 11:22 [PATCH] arm: Remove ununsed ARM code in optimized implementation Adhemerval Zanella
2018-04-16 14:55 ` Phil Blundell
2018-04-16 18:07 ` Adhemerval Zanella
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).