* Re: [PATCH] testsuite: Windows paths use \ and not / [not found] <20220930153845.2268381-1-torbjorn.svensson@foss.st.com> @ 2022-09-30 16:26 ` Jonathan Wakely 2022-09-30 17:47 ` Jonathan Wakely 0 siblings, 1 reply; 9+ messages in thread From: Jonathan Wakely @ 2022-09-30 16:26 UTC (permalink / raw) To: Torbjörn SVENSSON; +Cc: gcc-patches, nathan, Yvan ROUX, libstdc++ On Fri, 30 Sept 2022 at 17:04, Torbjörn SVENSSON <torbjorn.svensson@foss.st.com> wrote: > > libstdc++-v3/testsuite: > > * 20_util/bind/ref_neg.cc: Prune Windows paths too. Please CC the libstdc++ for libstdc++ patches. OK for trunk, thanks. > > Co-Authored-By: Yvan ROUX <yvan.roux@foss.st.com> > Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com> > --- > libstdc++-v3/testsuite/20_util/bind/ref_neg.cc | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc > index e779d2f20bd..1e9f3e7fece 100644 > --- a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc > +++ b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc > @@ -50,7 +50,7 @@ void test02() > > // Ignore the reasons for deduction/substitution failure in the headers. > // Arrange for the match to work on installed trees as well as build trees. > -// { dg-prune-output "/(functional|bits/invoke.h):" } > +// { dg-prune-output "[/\\](functional|bits/invoke.h):" } > > int main() > { > -- > 2.25.1 > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] testsuite: Windows paths use \ and not / 2022-09-30 16:26 ` [PATCH] testsuite: Windows paths use \ and not / Jonathan Wakely @ 2022-09-30 17:47 ` Jonathan Wakely 2022-09-30 17:55 ` Jakub Jelinek 0 siblings, 1 reply; 9+ messages in thread From: Jonathan Wakely @ 2022-09-30 17:47 UTC (permalink / raw) To: Torbjörn SVENSSON; +Cc: gcc-patches, nathan, Yvan ROUX, libstdc++ On Fri, 30 Sept 2022 at 17:26, Jonathan Wakely wrote: > > On Fri, 30 Sept 2022 at 17:04, Torbjörn SVENSSON > <torbjorn.svensson@foss.st.com> wrote: > > > > libstdc++-v3/testsuite: > > > > * 20_util/bind/ref_neg.cc: Prune Windows paths too. > > Please CC the libstdc++ for libstdc++ patches. > > OK for trunk, thanks. I'm seeing errors now on x86_64-linux: ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > > > > > Co-Authored-By: Yvan ROUX <yvan.roux@foss.st.com> > > Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com> > > --- > > libstdc++-v3/testsuite/20_util/bind/ref_neg.cc | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc > > index e779d2f20bd..1e9f3e7fece 100644 > > --- a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc > > +++ b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc > > @@ -50,7 +50,7 @@ void test02() > > > > // Ignore the reasons for deduction/substitution failure in the headers. > > // Arrange for the match to work on installed trees as well as build trees. > > -// { dg-prune-output "/(functional|bits/invoke.h):" } > > +// { dg-prune-output "[/\\](functional|bits/invoke.h):" } > > > > int main() > > { > > -- > > 2.25.1 > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] testsuite: Windows paths use \ and not / 2022-09-30 17:47 ` Jonathan Wakely @ 2022-09-30 17:55 ` Jakub Jelinek 2022-09-30 18:04 ` Jonathan Wakely 0 siblings, 1 reply; 9+ messages in thread From: Jakub Jelinek @ 2022-09-30 17:55 UTC (permalink / raw) To: Jonathan Wakely; +Cc: Torbjörn SVENSSON, libstdc++, gcc-patches, nathan On Fri, Sep 30, 2022 at 06:47:07PM +0100, Jonathan Wakely via Gcc-patches wrote: > On Fri, 30 Sept 2022 at 17:26, Jonathan Wakely wrote: > > > > On Fri, 30 Sept 2022 at 17:04, Torbjörn SVENSSON > > <torbjorn.svensson@foss.st.com> wrote: > > > > > > libstdc++-v3/testsuite: > > > > > > * 20_util/bind/ref_neg.cc: Prune Windows paths too. > > > > Please CC the libstdc++ for libstdc++ patches. > > > > OK for trunk, thanks. > > I'm seeing errors now on x86_64-linux: > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " Bet it should be // { dg-prune-output "\[/\\](functional|bits\[/\\]invoke.h):" } or so. Completely untested. > > > Co-Authored-By: Yvan ROUX <yvan.roux@foss.st.com> > > > Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com> > > > --- > > > libstdc++-v3/testsuite/20_util/bind/ref_neg.cc | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc > > > index e779d2f20bd..1e9f3e7fece 100644 > > > --- a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc > > > +++ b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc > > > @@ -50,7 +50,7 @@ void test02() > > > > > > // Ignore the reasons for deduction/substitution failure in the headers. > > > // Arrange for the match to work on installed trees as well as build trees. > > > -// { dg-prune-output "/(functional|bits/invoke.h):" } > > > +// { dg-prune-output "[/\\](functional|bits/invoke.h):" } > > > > > > int main() > > > { > > > -- > > > 2.25.1 > > > Jakub ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] testsuite: Windows paths use \ and not / 2022-09-30 17:55 ` Jakub Jelinek @ 2022-09-30 18:04 ` Jonathan Wakely 2022-09-30 18:07 ` Jonathan Wakely 2022-09-30 18:23 ` Andreas Schwab 0 siblings, 2 replies; 9+ messages in thread From: Jonathan Wakely @ 2022-09-30 18:04 UTC (permalink / raw) To: Jakub Jelinek; +Cc: Torbjörn SVENSSON, libstdc++, gcc-patches, nathan On Fri, 30 Sept 2022 at 18:55, Jakub Jelinek <jakub@redhat.com> wrote: > > On Fri, Sep 30, 2022 at 06:47:07PM +0100, Jonathan Wakely via Gcc-patches wrote: > > On Fri, 30 Sept 2022 at 17:26, Jonathan Wakely wrote: > > > > > > On Fri, 30 Sept 2022 at 17:04, Torbjörn SVENSSON > > > <torbjorn.svensson@foss.st.com> wrote: > > > > > > > > libstdc++-v3/testsuite: > > > > > > > > * 20_util/bind/ref_neg.cc: Prune Windows paths too. > > > > > > Please CC the libstdc++ for libstdc++ patches. > > > > > > OK for trunk, thanks. > > > > I'm seeing errors now on x86_64-linux: > > > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > Bet it should be > // { dg-prune-output "\[/\\](functional|bits\[/\\]invoke.h):" } > or so. Completely untested. That fixes the error, but now the regex doesn't match so there are still excess errors. It needs to be: // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):.*" } Without any regex special characters, there's an implicit .* before and after the pattern. But when you use any regex special characters in the pattern, it stops working. I can't remember why. I figured it out once. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] testsuite: Windows paths use \ and not / 2022-09-30 18:04 ` Jonathan Wakely @ 2022-09-30 18:07 ` Jonathan Wakely 2022-09-30 18:12 ` Jonathan Wakely 2022-09-30 18:23 ` Andreas Schwab 1 sibling, 1 reply; 9+ messages in thread From: Jonathan Wakely @ 2022-09-30 18:07 UTC (permalink / raw) To: Jakub Jelinek; +Cc: Torbjörn SVENSSON, libstdc++, gcc-patches, nathan On Fri, 30 Sept 2022 at 19:04, Jonathan Wakely <jwakely@redhat.com> wrote: > > On Fri, 30 Sept 2022 at 18:55, Jakub Jelinek <jakub@redhat.com> wrote: > > > > On Fri, Sep 30, 2022 at 06:47:07PM +0100, Jonathan Wakely via Gcc-patches wrote: > > > On Fri, 30 Sept 2022 at 17:26, Jonathan Wakely wrote: > > > > > > > > On Fri, 30 Sept 2022 at 17:04, Torbjörn SVENSSON > > > > <torbjorn.svensson@foss.st.com> wrote: > > > > > > > > > > libstdc++-v3/testsuite: > > > > > > > > > > * 20_util/bind/ref_neg.cc: Prune Windows paths too. > > > > > > > > Please CC the libstdc++ for libstdc++ patches. > > > > > > > > OK for trunk, thanks. > > > > > > I'm seeing errors now on x86_64-linux: > > > > > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > > > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > > > > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > > > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > > > Bet it should be > > // { dg-prune-output "\[/\\](functional|bits\[/\\]invoke.h):" } > > or so. Completely untested. > > That fixes the error, but now the regex doesn't match so there are > still excess errors. It needs to be: > > // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):.*" } > > Without any regex special characters, there's an implicit .* before > and after the pattern. But when you use any regex special characters > in the pattern, it stops working. I can't remember why. I figured it > out once. It looks like just adding .* at the start is enough: // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):" } But that's so ugly, I'm tempted to replace that prune with something different. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] testsuite: Windows paths use \ and not / 2022-09-30 18:07 ` Jonathan Wakely @ 2022-09-30 18:12 ` Jonathan Wakely 2022-09-30 21:07 ` Jonathan Wakely 0 siblings, 1 reply; 9+ messages in thread From: Jonathan Wakely @ 2022-09-30 18:12 UTC (permalink / raw) To: Jakub Jelinek; +Cc: Torbjörn SVENSSON, libstdc++, gcc-patches, nathan [-- Attachment #1: Type: text/plain, Size: 1946 bytes --] On Fri, 30 Sept 2022 at 19:07, Jonathan Wakely <jwakely@redhat.com> wrote: > > On Fri, 30 Sept 2022 at 19:04, Jonathan Wakely <jwakely@redhat.com> wrote: > > > > On Fri, 30 Sept 2022 at 18:55, Jakub Jelinek <jakub@redhat.com> wrote: > > > > > > On Fri, Sep 30, 2022 at 06:47:07PM +0100, Jonathan Wakely via Gcc-patches wrote: > > > > On Fri, 30 Sept 2022 at 17:26, Jonathan Wakely wrote: > > > > > > > > > > On Fri, 30 Sept 2022 at 17:04, Torbjörn SVENSSON > > > > > <torbjorn.svensson@foss.st.com> wrote: > > > > > > > > > > > > libstdc++-v3/testsuite: > > > > > > > > > > > > * 20_util/bind/ref_neg.cc: Prune Windows paths too. > > > > > > > > > > Please CC the libstdc++ for libstdc++ patches. > > > > > > > > > > OK for trunk, thanks. > > > > > > > > I'm seeing errors now on x86_64-linux: > > > > > > > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > > > > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > > > > > > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > > > > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > > > > > Bet it should be > > > // { dg-prune-output "\[/\\](functional|bits\[/\\]invoke.h):" } > > > or so. Completely untested. > > > > That fixes the error, but now the regex doesn't match so there are > > still excess errors. It needs to be: > > > > // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):.*" } > > > > Without any regex special characters, there's an implicit .* before > > and after the pattern. But when you use any regex special characters > > in the pattern, it stops working. I can't remember why. I figured it > > out once. > > It looks like just adding .* at the start is enough: > > // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):" } > > But that's so ugly, I'm tempted to replace that prune with something different. I'll finish testing this and push it. [-- Attachment #2: patch.txt --] [-- Type: text/plain, Size: 1077 bytes --] commit 8d10c215fcf8425b4c514e1d10a15a6086aa8442 Author: Jonathan Wakely <jwakely@redhat.com> Date: Fri Sep 30 19:10:29 2022 libstdc++: Fix broken dg-prune-output The new pattern in the dg-prune-output directive doesn't work. Instead of a messy regex full of leaning toothpicks, just match on the diagnostic text instead of the header paths. libstdc++-v3/ChangeLog: * testsuite/20_util/bind/ref_neg.cc: Fix dg-prune-output directive. diff --git a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc index 1e9f3e7fece..1d4b1b66c76 100644 --- a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc +++ b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc @@ -50,7 +50,7 @@ void test02() // Ignore the reasons for deduction/substitution failure in the headers. // Arrange for the match to work on installed trees as well as build trees. -// { dg-prune-output "[/\\](functional|bits/invoke.h):" } +// { dg-prune-output "no type named 'type' in .*std::result_of" } int main() { ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] testsuite: Windows paths use \ and not / 2022-09-30 18:12 ` Jonathan Wakely @ 2022-09-30 21:07 ` Jonathan Wakely 2022-10-01 11:02 ` Torbjorn SVENSSON 0 siblings, 1 reply; 9+ messages in thread From: Jonathan Wakely @ 2022-09-30 21:07 UTC (permalink / raw) To: Jonathan Wakely Cc: Jakub Jelinek, Torbjörn SVENSSON, libstdc++, gcc-patches, nathan [-- Attachment #1: Type: text/plain, Size: 2196 bytes --] On Fri, 30 Sept 2022 at 19:13, Jonathan Wakely via Libstdc++ <libstdc++@gcc.gnu.org> wrote: > > On Fri, 30 Sept 2022 at 19:07, Jonathan Wakely <jwakely@redhat.com> wrote: > > > > On Fri, 30 Sept 2022 at 19:04, Jonathan Wakely <jwakely@redhat.com> wrote: > > > > > > On Fri, 30 Sept 2022 at 18:55, Jakub Jelinek <jakub@redhat.com> wrote: > > > > > > > > On Fri, Sep 30, 2022 at 06:47:07PM +0100, Jonathan Wakely via Gcc-patches wrote: > > > > > On Fri, 30 Sept 2022 at 17:26, Jonathan Wakely wrote: > > > > > > > > > > > > On Fri, 30 Sept 2022 at 17:04, Torbjörn SVENSSON > > > > > > <torbjorn.svensson@foss.st.com> wrote: > > > > > > > > > > > > > > libstdc++-v3/testsuite: > > > > > > > > > > > > > > * 20_util/bind/ref_neg.cc: Prune Windows paths too. > > > > > > > > > > > > Please CC the libstdc++ for libstdc++ patches. > > > > > > > > > > > > OK for trunk, thanks. > > > > > > > > > > I'm seeing errors now on x86_64-linux: > > > > > > > > > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > > > > > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > > > > > > > > > ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " > > > > > dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " > > > > > > > > Bet it should be > > > > // { dg-prune-output "\[/\\](functional|bits\[/\\]invoke.h):" } > > > > or so. Completely untested. > > > > > > That fixes the error, but now the regex doesn't match so there are > > > still excess errors. It needs to be: > > > > > > // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):.*" } > > > > > > Without any regex special characters, there's an implicit .* before > > > and after the pattern. But when you use any regex special characters > > > in the pattern, it stops working. I can't remember why. I figured it > > > out once. > > > > It looks like just adding .* at the start is enough: > > > > // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):" } > > > > But that's so ugly, I'm tempted to replace that prune with something different. > > I'll finish testing this and push it. I committed this instead, with no .* in the pattern. [-- Attachment #2: patch.txt --] [-- Type: text/plain, Size: 1083 bytes --] commit 7069d03ba4ad6133225b89d433d9e86f0b0745b8 Author: Jonathan Wakely <jwakely@redhat.com> Date: Fri Sep 30 19:10:29 2022 libstdc++: Fix broken dg-prune-output The new pattern in the dg-prune-output directive doesn't work. Instead of a messy regex full of leaning toothpicks, just match on the diagnostic text instead of the header paths. libstdc++-v3/ChangeLog: * testsuite/20_util/bind/ref_neg.cc: Fix dg-prune-output directive. diff --git a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc index 1e9f3e7fece..a78935775c2 100644 --- a/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc +++ b/libstdc++-v3/testsuite/20_util/bind/ref_neg.cc @@ -50,7 +50,7 @@ void test02() // Ignore the reasons for deduction/substitution failure in the headers. // Arrange for the match to work on installed trees as well as build trees. -// { dg-prune-output "[/\\](functional|bits/invoke.h):" } +// { dg-prune-output "no type named 'type' in 'struct std::result_of" } int main() { ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] testsuite: Windows paths use \ and not / 2022-09-30 21:07 ` Jonathan Wakely @ 2022-10-01 11:02 ` Torbjorn SVENSSON 0 siblings, 0 replies; 9+ messages in thread From: Torbjorn SVENSSON @ 2022-10-01 11:02 UTC (permalink / raw) To: Jonathan Wakely, Jonathan Wakely Cc: Jakub Jelinek, libstdc++, gcc-patches, nathan Hi, I'm really sorry for the mess. I did test my patch, but I just looked for the PASS/FAIL for the excess errors and missed that there was an error with the pattern. In the end, the patch that you pushed is much better. Thanks for fixing the issue in my absence. Kind regards, Torbjörn On 2022-09-30 23:07, Jonathan Wakely wrote: > On Fri, 30 Sept 2022 at 19:13, Jonathan Wakely via Libstdc++ > <libstdc++@gcc.gnu.org> wrote: >> >> On Fri, 30 Sept 2022 at 19:07, Jonathan Wakely <jwakely@redhat.com> wrote: >>> >>> On Fri, 30 Sept 2022 at 19:04, Jonathan Wakely <jwakely@redhat.com> wrote: >>>> >>>> On Fri, 30 Sept 2022 at 18:55, Jakub Jelinek <jakub@redhat.com> wrote: >>>>> >>>>> On Fri, Sep 30, 2022 at 06:47:07PM +0100, Jonathan Wakely via Gcc-patches wrote: >>>>>> On Fri, 30 Sept 2022 at 17:26, Jonathan Wakely wrote: >>>>>>> >>>>>>> On Fri, 30 Sept 2022 at 17:04, Torbjörn SVENSSON >>>>>>> <torbjorn.svensson@foss.st.com> wrote: >>>>>>>> >>>>>>>> libstdc++-v3/testsuite: >>>>>>>> >>>>>>>> * 20_util/bind/ref_neg.cc: Prune Windows paths too. >>>>>>> >>>>>>> Please CC the libstdc++ for libstdc++ patches. >>>>>>> >>>>>>> OK for trunk, thanks. >>>>>> >>>>>> I'm seeing errors now on x86_64-linux: >>>>>> >>>>>> ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " >>>>>> dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " >>>>>> >>>>>> ERROR: 20_util/bind/ref_neg.cc: unknown dg option: /\\ for " >>>>>> dg-prune-output 53 "[/\\](functional|bits/invoke.h):" " >>>>> >>>>> Bet it should be >>>>> // { dg-prune-output "\[/\\](functional|bits\[/\\]invoke.h):" } >>>>> or so. Completely untested. >>>> >>>> That fixes the error, but now the regex doesn't match so there are >>>> still excess errors. It needs to be: >>>> >>>> // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):.*" } >>>> >>>> Without any regex special characters, there's an implicit .* before >>>> and after the pattern. But when you use any regex special characters >>>> in the pattern, it stops working. I can't remember why. I figured it >>>> out once. >>> >>> It looks like just adding .* at the start is enough: >>> >>> // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):" } >>> >>> But that's so ugly, I'm tempted to replace that prune with something different. >> >> I'll finish testing this and push it. > > I committed this instead, with no .* in the pattern. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] testsuite: Windows paths use \ and not / 2022-09-30 18:04 ` Jonathan Wakely 2022-09-30 18:07 ` Jonathan Wakely @ 2022-09-30 18:23 ` Andreas Schwab 1 sibling, 0 replies; 9+ messages in thread From: Andreas Schwab @ 2022-09-30 18:23 UTC (permalink / raw) To: Jonathan Wakely via Gcc-patches Cc: Jakub Jelinek, Jonathan Wakely, libstdc++, nathan On Sep 30 2022, Jonathan Wakely via Gcc-patches wrote: > That fixes the error, but now the regex doesn't match so there are > still excess errors. It needs to be: > > // { dg-prune-output ".*\[/\\](functional|bits\[/\\]invoke.h):.*" } In Tcl "." matches newlines, thus this will prune too much. -- Andreas Schwab, schwab@linux-m68k.org GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1 "And now for something completely different." ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-10-01 11:02 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <20220930153845.2268381-1-torbjorn.svensson@foss.st.com> 2022-09-30 16:26 ` [PATCH] testsuite: Windows paths use \ and not / Jonathan Wakely 2022-09-30 17:47 ` Jonathan Wakely 2022-09-30 17:55 ` Jakub Jelinek 2022-09-30 18:04 ` Jonathan Wakely 2022-09-30 18:07 ` Jonathan Wakely 2022-09-30 18:12 ` Jonathan Wakely 2022-09-30 21:07 ` Jonathan Wakely 2022-10-01 11:02 ` Torbjorn SVENSSON 2022-09-30 18:23 ` Andreas Schwab
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).