From: Alexey Lapshin <alexey.lapshin@espressif.com>
To: "jcmvbkbc@gmail.com" <jcmvbkbc@gmail.com>
Cc: Alexey Gerenkov <alexey.gerenkov@espressif.com>,
"newlib@sourceware.org" <newlib@sourceware.org>,
Ivan Grokhotkov <ivan@espressif.com>
Subject: [PATCH, RFC v2 4/8] libc: add xtensa port
Date: Mon, 15 May 2023 13:50:59 +0000 [thread overview]
Message-ID: <98f6055603d59cb6cd194d668e2b914e559a94bd.camel@espressif.com> (raw)
In-Reply-To: <15cedffa7c98bea187abe6041c7542db03dbe834.camel@espressif.com>
newlib:
* configure.host: add xtensa port
* libc/include/machine/ieeefp.h: Likewise.
* libc/include/machine/setjmp.h: Likewise.
* libc/machine/configure: Likewise.
* libc/machine/xtensa/Makefile.am: initial commit
* libc/machine/xtensa/Makefile.in: Likewise.
* libc/machine/xtensa/aclocal.m4: Likewise.
* libc/machine/xtensa/configure: Likewise.
* libc/machine/xtensa/configure.in: Likewise.
* libc/machine/xtensa/memcpy.S: Likewise.
* libc/machine/xtensa/memset.S: Likewise.
* libc/machine/xtensa/setjmp.S: Likewise.
* libc/machine/xtensa/strcmp.S: Likewise.
* libc/machine/xtensa/strcpy.S: Likewise.
* libc/machine/xtensa/strlen.S: Likewise.
* libc/machine/xtensa/strncpy.S: Likewise.
* libc/machine/xtensa/xtensa-asm.h: Likewise.
* libc/machine/xtensa/xtensa.tex: Likewise.
---
newlib/configure.host | 11 +
newlib/libc/include/machine/ieeefp.h | 4 +
newlib/libc/include/machine/setjmp.h | 29 +
newlib/libc/machine/configure | 3 +
newlib/libc/machine/xtensa/Makefile.am | 20 +
newlib/libc/machine/xtensa/Makefile.in | 455 +++
newlib/libc/machine/xtensa/aclocal.m4 | 992 +++++
newlib/libc/machine/xtensa/configure | 4763 +++++++++++++++++++++++
newlib/libc/machine/xtensa/configure.in | 14 +
newlib/libc/machine/xtensa/memcpy.S | 289 ++
newlib/libc/machine/xtensa/memset.S | 170 +
newlib/libc/machine/xtensa/setjmp.S | 260 ++
newlib/libc/machine/xtensa/strcmp.S | 778 ++++
newlib/libc/machine/xtensa/strcpy.S | 235 ++
newlib/libc/machine/xtensa/strlen.S | 115 +
newlib/libc/machine/xtensa/strncpy.S | 258 ++
newlib/libc/machine/xtensa/xtensa-asm.h | 72 +
newlib/libc/machine/xtensa/xtensa.tex | 72 +
18 files changed, 8540 insertions(+)
create mode 100644 newlib/libc/machine/xtensa/Makefile.am
create mode 100644 newlib/libc/machine/xtensa/Makefile.in
create mode 100644 newlib/libc/machine/xtensa/aclocal.m4
create mode 100755 newlib/libc/machine/xtensa/configure
create mode 100644 newlib/libc/machine/xtensa/configure.in
create mode 100644 newlib/libc/machine/xtensa/memcpy.S
create mode 100644 newlib/libc/machine/xtensa/memset.S
create mode 100644 newlib/libc/machine/xtensa/setjmp.S
create mode 100644 newlib/libc/machine/xtensa/strcmp.S
create mode 100644 newlib/libc/machine/xtensa/strcpy.S
create mode 100644 newlib/libc/machine/xtensa/strlen.S
create mode 100644 newlib/libc/machine/xtensa/strncpy.S
create mode 100644 newlib/libc/machine/xtensa/xtensa-asm.h
create mode 100644 newlib/libc/machine/xtensa/xtensa.tex
diff --git a/newlib/configure.host b/newlib/configure.host
index 1ddbb6c76..f514a191d 100644
--- a/newlib/configure.host
+++ b/newlib/configure.host
@@ -367,6 +367,11 @@ case "${host_cpu}" in
newlib_cflags="${newlib_cflags} -DMALLOC_PROVIDED"
newlib_cflags="${newlib_cflags} -DPREFER_SIZE_OVER_SPEED"
;;
+ xtensa)
+ libm_machine_dir=xtensa
+ machine_dir=xtensa
+ newlib_cflags="${newlib_cflags} -mlongcalls"
+ ;;
z8k)
machine_dir=z8k
;;
@@ -630,6 +635,9 @@ case "${host}" in
w65-*-*)
sys_dir=w65
;;
+ xtensa*-*-* | xtensa*-*)
+ sys_dir=xtensa
+ ;;
z8k-*-coff)
sys_dir=z8ksim
;;
@@ -926,6 +934,9 @@ newlib_cflags="${newlib_cflags} -DCLOCK_PROVIDED -DMALLOC_PROVIDED -DEXIT_PROVID
xstormy16-*-*)
syscall_dir=syscalls
;;
+ xtensa*-*-* | xtensa*-*)
+ syscall_dir=syscalls
+ ;;
z8k-*-*)
syscall_dir=syscalls
;;
diff --git a/newlib/libc/include/machine/ieeefp.h b/newlib/libc/include/machine/ieeefp.h
index 4dc13828c..0ba7ae1d4 100644
--- a/newlib/libc/include/machine/ieeefp.h
+++ b/newlib/libc/include/machine/ieeefp.h
@@ -483,6 +483,10 @@
#define __IEEE_LITTLE_ENDIAN
#endif
+#ifdef __XTENSA_EB__
+#define __IEEE_BIG_ENDIAN
+#endif
+
#ifdef __CYGWIN__
#define __OBSOLETE_MATH_DEFAULT 0
#endif
diff --git a/newlib/libc/include/machine/setjmp.h b/newlib/libc/include/machine/setjmp.h
index 0bb53238b..29a532dec 100644
--- a/newlib/libc/include/machine/setjmp.h
+++ b/newlib/libc/include/machine/setjmp.h
@@ -292,6 +292,35 @@ _BEGIN_STD_C
#define _JBLEN 8
#endif
+#ifdef __XTENSA__
+#if __XTENSA_WINDOWED_ABI__
+
+/* The jmp_buf structure for Xtensa windowed ABI holds the following
+ (where "proc" is the procedure that calls setjmp): 4-12 registers
+ from the window of proc, the 4 words from the save area at proc's $sp
+ (in case a subsequent alloca in proc moves $sp), and the return
+ address within proc. Everything else is saved on the stack in the
+ normal save areas. The jmp_buf structure is:
+
+ struct jmp_buf {
+ int regs[12];
+ int save[4];
+ void *return_address;
+ }
+
+ See the setjmp code for details. */
+
+/* sizeof(struct jmp_buf) */
+#define _JBLEN 17
+
+#else /* __XTENSA_CALL0_ABI__ */
+
+/* a0, a1, a12, a13, a14, a15 */
+#define _JBLEN 6
+
+#endif /* __XTENSA_CALL0_ABI__ */
+#endif /* __XTENSA__ */
+
#ifdef __mep__
/* 16 GPRs, pc, hi, lo */
#define _JBLEN 19
diff --git a/newlib/libc/machine/configure b/newlib/libc/machine/configure
index 58d872698..0f7f272a4 100755
--- a/newlib/libc/machine/configure
+++ b/newlib/libc/machine/configure
@@ -843,6 +843,7 @@ w65
x86_64
xc16x
xstormy16
+xtensa
z8k'
# Initialize some variables set by options.
@@ -11969,6 +11970,8 @@ subdirs="$subdirs a29k"
xc16x) subdirs="$subdirs xc16x"
;;
xstormy16) subdirs="$subdirs xstormy16"
+ ;;
+ xtensa) subdirs="$subdirs xtensa"
;;
z8k) subdirs="$subdirs z8k"
;;
diff --git a/newlib/libc/machine/xtensa/Makefile.am b/newlib/libc/machine/xtensa/Makefile.am
new file mode 100644
index 000000000..9307cd871
--- /dev/null
+++ b/newlib/libc/machine/xtensa/Makefile.am
@@ -0,0 +1,20 @@
+## Process this file with automake to generate Makefile.in
+
+AUTOMAKE_OPTIONS = cygnus
+
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+AM_CCASFLAGS = $(INCLUDES)
+
+noinst_LIBRARIES = lib.a
+
+lib_a_SOURCES = setjmp.S memcpy.S memset.S strcmp.S strcpy.S strncpy.S strlen.S
+lib_a_CCASFLAGS=$(AM_CCASFLAGS)
+lib_a_CFLAGS=$(AM_CFLAGS)
+TARGETDOC = ../../tmp.texi
+
+doc:
+ cat $(srcdir)/xtensa.tex >> $(TARGETDOC)
+
+ACLOCAL_AMFLAGS = -I ../../.. -I ../../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
diff --git a/newlib/libc/machine/xtensa/Makefile.in b/newlib/libc/machine/xtensa/Makefile.in
new file mode 100644
index 000000000..ef546441b
--- /dev/null
+++ b/newlib/libc/machine/xtensa/Makefile.in
@@ -0,0 +1,455 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(srcdir)/../../../../mkinstalldirs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../../acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+ARFLAGS = cru
+lib_a_AR = $(AR) $(ARFLAGS)
+lib_a_LIBADD =
+am_lib_a_OBJECTS = lib_a-setjmp.$(OBJEXT) lib_a-memcpy.$(OBJEXT) \
+ lib_a-memset.$(OBJEXT) lib_a-strcmp.$(OBJEXT) \
+ lib_a-strcpy.$(OBJEXT) lib_a-strncpy.$(OBJEXT) \
+ lib_a-strlen.$(OBJEXT)
+lib_a_OBJECTS = $(am_lib_a_OBJECTS)
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(lib_a_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
+NO_INCLUDE_LIST = @NO_INCLUDE_LIST@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+READELF = @READELF@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+aext = @aext@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libm_machine_dir = @libm_machine_dir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lpfx = @lpfx@
+machine_dir = @machine_dir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+newlib_basedir = @newlib_basedir@
+oext = @oext@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sys_dir = @sys_dir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = cygnus
+INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+AM_CCASFLAGS = $(INCLUDES)
+noinst_LIBRARIES = lib.a
+lib_a_SOURCES = setjmp.S memcpy.S memset.S strcmp.S strcpy.S strncpy.S strlen.S
+lib_a_CCASFLAGS = $(AM_CCASFLAGS)
+lib_a_CFLAGS = $(AM_CFLAGS)
+TARGETDOC = ../../tmp.texi
+ACLOCAL_AMFLAGS = -I ../../.. -I ../../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .S .o .obj
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --cygnus'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --cygnus \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --cygnus Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
+ -rm -f lib.a
+ $(lib_a_AR) lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
+ $(RANLIB) lib.a
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+.S.o:
+ $(CPPASCOMPILE) -c -o $@ $<
+
+.S.obj:
+ $(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+lib_a-setjmp.o: setjmp.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-setjmp.o `test -f 'setjmp.S' || echo '$(srcdir)/'`setjmp.S
+
+lib_a-setjmp.obj: setjmp.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-setjmp.obj `if test -f 'setjmp.S'; then $(CYGPATH_W) 'setjmp.S'; else $(CYGPATH_W) '$(srcdir)/setjmp.S'; fi`
+
+lib_a-memcpy.o: memcpy.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-memcpy.o `test -f 'memcpy.S' || echo '$(srcdir)/'`memcpy.S
+
+lib_a-memcpy.obj: memcpy.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-memcpy.obj `if test -f 'memcpy.S'; then $(CYGPATH_W) 'memcpy.S'; else $(CYGPATH_W) '$(srcdir)/memcpy.S'; fi`
+
+lib_a-memset.o: memset.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-memset.o `test -f 'memset.S' || echo '$(srcdir)/'`memset.S
+
+lib_a-memset.obj: memset.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-memset.obj `if test -f 'memset.S'; then $(CYGPATH_W) 'memset.S'; else $(CYGPATH_W) '$(srcdir)/memset.S'; fi`
+
+lib_a-strcmp.o: strcmp.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-strcmp.o `test -f 'strcmp.S' || echo '$(srcdir)/'`strcmp.S
+
+lib_a-strcmp.obj: strcmp.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-strcmp.obj `if test -f 'strcmp.S'; then $(CYGPATH_W) 'strcmp.S'; else $(CYGPATH_W) '$(srcdir)/strcmp.S'; fi`
+
+lib_a-strcpy.o: strcpy.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-strcpy.o `test -f 'strcpy.S' || echo '$(srcdir)/'`strcpy.S
+
+lib_a-strcpy.obj: strcpy.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-strcpy.obj `if test -f 'strcpy.S'; then $(CYGPATH_W) 'strcpy.S'; else $(CYGPATH_W) '$(srcdir)/strcpy.S'; fi`
+
+lib_a-strncpy.o: strncpy.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-strncpy.o `test -f 'strncpy.S' || echo '$(srcdir)/'`strncpy.S
+
+lib_a-strncpy.obj: strncpy.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-strncpy.obj `if test -f 'strncpy.S'; then $(CYGPATH_W) 'strncpy.S'; else $(CYGPATH_W) '$(srcdir)/strncpy.S'; fi`
+
+lib_a-strlen.o: strlen.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-strlen.o `test -f 'strlen.S' || echo '$(srcdir)/'`strlen.S
+
+lib_a-strlen.obj: strlen.S
+ $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(lib_a_CCASFLAGS) $(CCASFLAGS) -c -o lib_a-strlen.obj `if test -f 'strlen.S'; then $(CYGPATH_W) 'strlen.S'; else $(CYGPATH_W) '$(srcdir)/strlen.S'; fi`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ set x; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+check-am:
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+ clean-generic clean-noinstLIBRARIES ctags distclean \
+ distclean-compile distclean-generic distclean-tags dvi dvi-am \
+ html html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am
+
+
+doc:
+ cat $(srcdir)/xtensa.tex >> $(TARGETDOC)
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/newlib/libc/machine/xtensa/aclocal.m4 b/newlib/libc/machine/xtensa/aclocal.m4
new file mode 100644
index 000000000..0564b7c4e
--- /dev/null
+++ b/newlib/libc/machine/xtensa/aclocal.m4
@@ -0,0 +1,992 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../../acinclude.m4])
diff --git a/newlib/libc/machine/xtensa/configure b/newlib/libc/machine/xtensa/configure
new file mode 100755
index 000000000..ce07b599c
--- /dev/null
+++ b/newlib/libc/machine/xtensa/configure
@@ -0,0 +1,4763 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for newlib 4.1.0.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ # Preserve -v and -x to the replacement shell.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+ esac
+ exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='newlib'
+PACKAGE_TARNAME='newlib'
+PACKAGE_VERSION='4.1.0'
+PACKAGE_STRING='newlib 4.1.0'
+PACKAGE_BUGREPORT=''
+PACKAGE_URL=''
+
+ac_unique_file="Makefile.am"
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+sys_dir
+machine_dir
+libm_machine_dir
+lpfx
+aext
+oext
+OBJEXT
+USE_LIBTOOL_FALSE
+USE_LIBTOOL_TRUE
+ELIX_LEVEL_4_FALSE
+ELIX_LEVEL_4_TRUE
+ELIX_LEVEL_3_FALSE
+ELIX_LEVEL_3_TRUE
+ELIX_LEVEL_2_FALSE
+ELIX_LEVEL_2_TRUE
+ELIX_LEVEL_1_FALSE
+ELIX_LEVEL_1_TRUE
+ELIX_LEVEL_0_FALSE
+ELIX_LEVEL_0_TRUE
+LDFLAGS
+NO_INCLUDE_LIST
+NEWLIB_CFLAGS
+CCASFLAGS
+CCAS
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+READELF
+RANLIB
+AR
+AS
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+newlib_basedir
+MAY_SUPPLY_SYSCALLS_FALSE
+MAY_SUPPLY_SYSCALLS_TRUE
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_multilib
+enable_target_optspace
+enable_malloc_debugging
+enable_newlib_multithread
+enable_newlib_iconv
+enable_newlib_elix_level
+enable_newlib_io_float
+enable_newlib_supplied_syscalls
+enable_newlib_fno_builtin
+enable_dependency_tracking
+enable_maintainer_mode
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CCAS
+CCASFLAGS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used" >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures newlib 4.1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/newlib]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of newlib 4.1.0:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-multilib build many library versions (default)
+ --enable-target-optspace optimize for space
+ --enable-malloc-debugging indicate malloc debugging requested
+ --enable-newlib-multithread enable support for multiple threads
+ --enable-newlib-iconv enable iconv library support
+ --enable-newlib-elix-level supply desired elix library level (1-4)
+ --disable-newlib-io-float disable printf/scanf family float support
+ --disable-newlib-supplied-syscalls disable newlib from supplying syscalls
+ --disable-newlib-fno-builtin disable -fno-builtin flag to allow compiler to use builtin library functions
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer
+
+Some influential environment variables:
+ CCAS assembler compiler command (defaults to CC)
+ CCASFLAGS assembler compiler flags (defaults to CFLAGS)
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+newlib configure 4.1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by newlib $as_me 4.1.0, which was
+generated by GNU Autoconf 2.68. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+ac_aux_dir=
+for ac_dir in ../../../.. "$srcdir"/../../../..; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../../.. \"$srcdir\"/../../../.." "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+am__api_version='1.11'
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+# Check whether --enable-multilib was given.
+if test "${enable_multilib+set}" = set; then :
+ enableval=$enable_multilib; case "${enableval}" in
+ yes) multilib=yes ;;
+ no) multilib=no ;;
+ *) as_fn_error $? "bad value ${enableval} for multilib option" "$LINENO" 5 ;;
+ esac
+else
+ multilib=yes
+fi
+
+# Check whether --enable-target-optspace was given.
+if test "${enable_target_optspace+set}" = set; then :
+ enableval=$enable_target_optspace; case "${enableval}" in
+ yes) target_optspace=yes ;;
+ no) target_optspace=no ;;
+ *) as_fn_error $? "bad value ${enableval} for target-optspace option" "$LINENO" 5 ;;
+ esac
+else
+ target_optspace=
+fi
+
+# Check whether --enable-malloc-debugging was given.
+if test "${enable_malloc_debugging+set}" = set; then :
+ enableval=$enable_malloc_debugging; case "${enableval}" in
+ yes) malloc_debugging=yes ;;
+ no) malloc_debugging=no ;;
+ *) as_fn_error $? "bad value ${enableval} for malloc-debugging option" "$LINENO" 5 ;;
+ esac
+else
+ malloc_debugging=
+fi
+
+# Check whether --enable-newlib-multithread was given.
+if test "${enable_newlib_multithread+set}" = set; then :
+ enableval=$enable_newlib_multithread; case "${enableval}" in
+ yes) newlib_multithread=yes ;;
+ no) newlib_multithread=no ;;
+ *) as_fn_error $? "bad value ${enableval} for newlib-multithread option" "$LINENO" 5 ;;
+ esac
+else
+ newlib_multithread=yes
+fi
+
+# Check whether --enable-newlib-iconv was given.
+if test "${enable_newlib_iconv+set}" = set; then :
+ enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then
+ case "${enableval}" in
+ yes) newlib_iconv=yes ;;
+ no) newlib_iconv=no ;;
+ *) as_fn_error $? "bad value ${enableval} for newlib-iconv option" "$LINENO" 5 ;;
+ esac
+ fi
+else
+ newlib_iconv=${newlib_iconv}
+fi
+
+# Check whether --enable-newlib-elix-level was given.
+if test "${enable_newlib_elix_level+set}" = set; then :
+ enableval=$enable_newlib_elix_level; case "${enableval}" in
+ 0) newlib_elix_level=0 ;;
+ 1) newlib_elix_level=1 ;;
+ 2) newlib_elix_level=2 ;;
+ 3) newlib_elix_level=3 ;;
+ 4) newlib_elix_level=4 ;;
+ *) as_fn_error $? "bad value ${enableval} for newlib-elix-level option" "$LINENO" 5 ;;
+ esac
+else
+ newlib_elix_level=0
+fi
+
+# Check whether --enable-newlib-io-float was given.
+if test "${enable_newlib_io_float+set}" = set; then :
+ enableval=$enable_newlib_io_float; case "${enableval}" in
+ yes) newlib_io_float=yes ;;
+ no) newlib_io_float=no ;;
+ *) as_fn_error $? "bad value ${enableval} for newlib-io-float option" "$LINENO" 5 ;;
+ esac
+else
+ newlib_io_float=yes
+fi
+
+# Check whether --enable-newlib-supplied-syscalls was given.
+if test "${enable_newlib_supplied_syscalls+set}" = set; then :
+ enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
+ yes) newlib_may_supply_syscalls=yes ;;
+ no) newlib_may_supply_syscalls=no ;;
+ *) as_fn_error $? "bad value ${enableval} for newlib-supplied-syscalls option" "$LINENO" 5 ;;
+ esac
+else
+ newlib_may_supply_syscalls=yes
+fi
+
+ if test x${newlib_may_supply_syscalls} = xyes; then
+ MAY_SUPPLY_SYSCALLS_TRUE=
+ MAY_SUPPLY_SYSCALLS_FALSE='#'
+else
+ MAY_SUPPLY_SYSCALLS_TRUE='#'
+ MAY_SUPPLY_SYSCALLS_FALSE=
+fi
+
+
+# Check whether --enable-newlib-fno-builtin was given.
+if test "${enable_newlib_fno_builtin+set}" = set; then :
+ enableval=$enable_newlib_fno_builtin; case "${enableval}" in
+ yes) newlib_fno_builtin=yes ;;
+ no) newlib_fno_builtin=no ;;
+ *) as_fn_error $? "bad value ${enableval} for newlib-fno-builtin option" "$LINENO" 5 ;;
+ esac
+else
+ newlib_fno_builtin=
+fi
+
+
+
+test -z "${with_target_subdir}" && with_target_subdir=.
+
+if test "${srcdir}" = "."; then
+ if test "${with_target_subdir}" != "."; then
+ newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
+ else
+ newlib_basedir="${srcdir}/${with_multisrctop}../../.."
+ fi
+else
+ newlib_basedir="${srcdir}/../../.."
+fi
+
+
+
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='newlib'
+ VERSION='4.1.0'
+
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+# FIXME: We temporarily define our own version of AC_PROG_CC. This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable. This should really be fixed in autoconf
+# itself.
+
+
+
+
+
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -z "$CC" && as_fn_error $? "no acceptable cc found in \$PATH" "$LINENO" 5
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using GNU C" >&5
+$as_echo_n "checking whether we are using GNU C... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_c_compiler_gnu=yes
+else
+ ac_cv_c_compiler_gnu=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+
+if test $ac_cv_c_compiler_gnu = yes; then
+ GCC=yes
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+ ac_ct_AS=$AS
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AS"; then
+ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AS="as"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AS" = x; then
+ AS=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AS=$ac_ct_AS
+ fi
+else
+ AS="$ac_cv_prog_AS"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AR" = x; then
+ AR=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args.
+set dummy ${ac_tool_prefix}readelf; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_READELF+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$READELF"; then
+ ac_cv_prog_READELF="$READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_READELF="${ac_tool_prefix}readelf"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+READELF=$ac_cv_prog_READELF
+if test -n "$READELF"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
+$as_echo "$READELF" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_READELF"; then
+ ac_ct_READELF=$READELF
+ # Extract the first word of "readelf", so it can be a program name with args.
+set dummy readelf; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_READELF+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_READELF"; then
+ ac_cv_prog_ac_ct_READELF="$ac_ct_READELF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_READELF="readelf"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_READELF=$ac_cv_prog_ac_ct_READELF
+if test -n "$ac_ct_READELF"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_READELF" >&5
+$as_echo "$ac_ct_READELF" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_READELF" = x; then
+ READELF=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ READELF=$ac_ct_READELF
+ fi
+else
+ READELF="$ac_cv_prog_READELF"
+fi
+
+
+
+
+# Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */
+ac_given_INSTALL=$INSTALL
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+# By default we simply use the C compiler to build assembly code.
+
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+
+
+
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables. So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+if false; then
+
+ dummy_var=1
+fi
+
+. ${newlib_basedir}/configure.host
+
+NEWLIB_CFLAGS=${newlib_cflags}
+
+
+NO_INCLUDE_LIST=${noinclude}
+
+
+LDFLAGS=${ldflags}
+
+
+ if test x${newlib_elix_level} = x0; then
+ ELIX_LEVEL_0_TRUE=
+ ELIX_LEVEL_0_FALSE='#'
+else
+ ELIX_LEVEL_0_TRUE='#'
+ ELIX_LEVEL_0_FALSE=
+fi
+
+ if test x${newlib_elix_level} = x1; then
+ ELIX_LEVEL_1_TRUE=
+ ELIX_LEVEL_1_FALSE='#'
+else
+ ELIX_LEVEL_1_TRUE='#'
+ ELIX_LEVEL_1_FALSE=
+fi
+
+ if test x${newlib_elix_level} = x2; then
+ ELIX_LEVEL_2_TRUE=
+ ELIX_LEVEL_2_FALSE='#'
+else
+ ELIX_LEVEL_2_TRUE='#'
+ ELIX_LEVEL_2_FALSE=
+fi
+
+ if test x${newlib_elix_level} = x3; then
+ ELIX_LEVEL_3_TRUE=
+ ELIX_LEVEL_3_FALSE='#'
+else
+ ELIX_LEVEL_3_TRUE='#'
+ ELIX_LEVEL_3_FALSE=
+fi
+
+ if test x${newlib_elix_level} = x4; then
+ ELIX_LEVEL_4_TRUE=
+ ELIX_LEVEL_4_FALSE='#'
+else
+ ELIX_LEVEL_4_TRUE='#'
+ ELIX_LEVEL_4_FALSE=
+fi
+
+
+ if test x${use_libtool} = xyes; then
+ USE_LIBTOOL_TRUE=
+ USE_LIBTOOL_FALSE='#'
+else
+ USE_LIBTOOL_TRUE='#'
+ USE_LIBTOOL_FALSE=
+fi
+
+
+# Emit any target-specific warnings.
+if test "x${newlib_msg_warn}" != "x"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ${newlib_msg_warn}" >&5
+$as_echo "$as_me: WARNING: ${newlib_msg_warn}" >&2;}
+fi
+
+# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we
+# use oext, which is set in configure.host based on the target platform.
+OBJEXT=${oext}
+
+
+
+
+
+
+
+
+
+
+
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+ g
+ s/^\n//
+ s/\n/ /g
+ p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${MAY_SUPPLY_SYSCALLS_TRUE}" && test -z "${MAY_SUPPLY_SYSCALLS_FALSE}"; then
+ as_fn_error $? "conditional \"MAY_SUPPLY_SYSCALLS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ELIX_LEVEL_0_TRUE}" && test -z "${ELIX_LEVEL_0_FALSE}"; then
+ as_fn_error $? "conditional \"ELIX_LEVEL_0\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ELIX_LEVEL_1_TRUE}" && test -z "${ELIX_LEVEL_1_FALSE}"; then
+ as_fn_error $? "conditional \"ELIX_LEVEL_1\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ELIX_LEVEL_2_TRUE}" && test -z "${ELIX_LEVEL_2_FALSE}"; then
+ as_fn_error $? "conditional \"ELIX_LEVEL_2\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ELIX_LEVEL_3_TRUE}" && test -z "${ELIX_LEVEL_3_FALSE}"; then
+ as_fn_error $? "conditional \"ELIX_LEVEL_3\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ELIX_LEVEL_4_TRUE}" && test -z "${ELIX_LEVEL_4_FALSE}"; then
+ as_fn_error $? "conditional \"ELIX_LEVEL_4\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${USE_LIBTOOL_TRUE}" && test -z "${USE_LIBTOOL_FALSE}"; then
+ as_fn_error $? "conditional \"USE_LIBTOOL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by newlib $as_me 4.1.0, which was
+generated by GNU Autoconf 2.68. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+newlib config.status 4.1.0
+configured by $0, generated by GNU Autoconf 2.68,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h | --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = "\a"
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/newlib/libc/machine/xtensa/configure.in b/newlib/libc/machine/xtensa/configure.in
new file mode 100644
index 000000000..0ad5df51e
--- /dev/null
+++ b/newlib/libc/machine/xtensa/configure.in
@@ -0,0 +1,14 @@
+dnl This is the newlib/libc/machine/xtensa configure.in file.
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT([newlib],[NEWLIB_VERSION])
+AC_CONFIG_SRCDIR([Makefile.am])
+
+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake.
+AC_CONFIG_AUX_DIR(../../../..)
+
+NEWLIB_CONFIGURE(../../..)
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/newlib/libc/machine/xtensa/memcpy.S b/newlib/libc/machine/xtensa/memcpy.S
new file mode 100644
index 000000000..7cc8ed0fb
--- /dev/null
+++ b/newlib/libc/machine/xtensa/memcpy.S
@@ -0,0 +1,289 @@
+/* ANSI C standard library function memcpy.
+
+ Copyright (c) 2002-2008 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#include "xtensa-asm.h"
+
+/* If the Xtensa Unaligned Load Exception option is not used, this
+ code can run a few cycles faster by relying on the low address bits
+ being ignored. However, if the code is then run with an Xtensa ISS
+ client that checks for unaligned accesses, it will produce a lot of
+ warning messages. Set this flag to disable the use of unaligned
+ accesses and keep the ISS happy. */
+
+#if XCHAL_UNALIGNED_LOAD_EXCEPTION || 1
+#define UNALIGNED_ADDRESSES_CHECKED 1
+#endif
+
+
+/* void *memcpy (void *dst, const void *src, size_t len)
+
+ The algorithm is as follows:
+
+ If the destination is unaligned, align it by conditionally
+ copying 1- and/or 2-byte pieces.
+
+ If the source is aligned, copy 16 bytes with a loop, and then finish up
+ with 8, 4, 2, and 1-byte copies conditional on the length.
+
+ Else (if source is unaligned), do the same, but use SRC to align the
+ source data.
+
+ This code tries to use fall-through branches for the common
+ case of aligned source and destination and multiple of 4 (or 8) length. */
+
+
+/* Byte by byte copy. */
+
+ .text
+ .begin schedule
+ .align XCHAL_INST_FETCH_WIDTH
+ .literal_position
+__memcpy_aux:
+
+ /* Skip bytes to get proper alignment for three-byte loop */
+.skip XCHAL_INST_FETCH_WIDTH - 3
+
+.Lbytecopy:
+#if XCHAL_HAVE_LOOPS
+ loopnez a4, 2f
+#else
+ beqz a4, 2f
+ add a7, a3, a4 // a7 = end address for source
+#endif
+1: l8ui a6, a3, 0
+ addi a3, a3, 1
+ s8i a6, a5, 0
+ addi a5, a5, 1
+#if !XCHAL_HAVE_LOOPS
+ bltu a3, a7, 1b
+#endif
+2: leaf_return
+
+
+/* Destination is unaligned. */
+
+ .align 4
+.Ldst1mod2: // dst is only byte aligned
+
+ /* Do short copies byte-by-byte. */
+ bltui a4, 7, .Lbytecopy
+
+ /* Copy 1 byte. */
+ l8ui a6, a3, 0
+ addi a3, a3, 1
+ addi a4, a4, -1
+ s8i a6, a5, 0
+ addi a5, a5, 1
+
+ /* Return to main algorithm if dst is now aligned. */
+ bbci.l a5, 1, .Ldstaligned
+
+.Ldst2mod4: // dst has 16-bit alignment
+
+ /* Do short copies byte-by-byte. */
+ bltui a4, 6, .Lbytecopy
+
+ /* Copy 2 bytes. */
+ l8ui a6, a3, 0
+ l8ui a7, a3, 1
+ addi a3, a3, 2
+ addi a4, a4, -2
+ s8i a6, a5, 0
+ s8i a7, a5, 1
+ addi a5, a5, 2
+
+ /* dst is now aligned; return to main algorithm. */
+ j .Ldstaligned
+
+
+ .align 4
+ .global memcpy
+ .type memcpy, @function
+memcpy:
+ leaf_entry sp, 16
+ /* a2 = dst, a3 = src, a4 = len */
+
+ mov a5, a2 // copy dst so that a2 is return value
+ bbsi.l a2, 0, .Ldst1mod2
+ bbsi.l a2, 1, .Ldst2mod4
+.Ldstaligned:
+
+ /* Get number of loop iterations with 16B per iteration. */
+ srli a7, a4, 4
+
+ /* Check if source is aligned. */
+ slli a8, a3, 30
+ bnez a8, .Lsrcunaligned
+
+ /* Destination and source are word-aligned, use word copy. */
+#if XCHAL_HAVE_LOOPS
+ loopnez a7, 2f
+#else
+ beqz a7, 2f
+ slli a8, a7, 4
+ add a8, a8, a3 // a8 = end of last 16B source chunk
+#endif
+1: l32i a6, a3, 0
+ l32i a7, a3, 4
+ s32i a6, a5, 0
+ l32i a6, a3, 8
+ s32i a7, a5, 4
+ l32i a7, a3, 12
+ s32i a6, a5, 8
+ addi a3, a3, 16
+ s32i a7, a5, 12
+ addi a5, a5, 16
+#if !XCHAL_HAVE_LOOPS
+ bltu a3, a8, 1b
+#endif
+
+ /* Copy any leftover pieces smaller than 16B. */
+2: bbci.l a4, 3, 3f
+
+ /* Copy 8 bytes. */
+ l32i a6, a3, 0
+ l32i a7, a3, 4
+ addi a3, a3, 8
+ s32i a6, a5, 0
+ s32i a7, a5, 4
+ addi a5, a5, 8
+
+3: bbsi.l a4, 2, 4f
+ bbsi.l a4, 1, 5f
+ bbsi.l a4, 0, 6f
+ leaf_return
+
+ .align 4
+ /* Copy 4 bytes. */
+4: l32i a6, a3, 0
+ addi a3, a3, 4
+ s32i a6, a5, 0
+ addi a5, a5, 4
+ bbsi.l a4, 1, 5f
+ bbsi.l a4, 0, 6f
+ leaf_return
+
+ /* Copy 2 bytes. */
+5: l16ui a6, a3, 0
+ addi a3, a3, 2
+ s16i a6, a5, 0
+ addi a5, a5, 2
+ bbsi.l a4, 0, 6f
+ leaf_return
+
+ /* Copy 1 byte. */
+6: l8ui a6, a3, 0
+ s8i a6, a5, 0
+
+.Ldone:
+ leaf_return
+
+
+/* Destination is aligned; source is unaligned. */
+
+ .align 4
+.Lsrcunaligned:
+ /* Avoid loading anything for zero-length copies. */
+ beqz a4, .Ldone
+
+ /* Copy 16 bytes per iteration for word-aligned dst and
+ unaligned src. */
+ ssa8 a3 // set shift amount from byte offset
+#if UNALIGNED_ADDRESSES_CHECKED
+ srli a11, a8, 30 // save unalignment offset for below
+ sub a3, a3, a11 // align a3
+#endif
+ l32i a6, a3, 0 // load first word
+#if XCHAL_HAVE_LOOPS
+ loopnez a7, 2f
+#else
+ beqz a7, 2f
+ slli a10, a7, 4
+ add a10, a10, a3 // a10 = end of last 16B source chunk
+#endif
+1: l32i a7, a3, 4
+ l32i a8, a3, 8
+ src_b a6, a6, a7
+ s32i a6, a5, 0
+ l32i a9, a3, 12
+ src_b a7, a7, a8
+ s32i a7, a5, 4
+ l32i a6, a3, 16
+ src_b a8, a8, a9
+ s32i a8, a5, 8
+ addi a3, a3, 16
+ src_b a9, a9, a6
+ s32i a9, a5, 12
+ addi a5, a5, 16
+#if !XCHAL_HAVE_LOOPS
+ bltu a3, a10, 1b
+#endif
+
+2: bbci.l a4, 3, 3f
+
+ /* Copy 8 bytes. */
+ l32i a7, a3, 4
+ l32i a8, a3, 8
+ src_b a6, a6, a7
+ s32i a6, a5, 0
+ addi a3, a3, 8
+ src_b a7, a7, a8
+ s32i a7, a5, 4
+ addi a5, a5, 8
+ mov a6, a8
+
+3: bbci.l a4, 2, 4f
+
+ /* Copy 4 bytes. */
+ l32i a7, a3, 4
+ addi a3, a3, 4
+ src_b a6, a6, a7
+ s32i a6, a5, 0
+ addi a5, a5, 4
+ mov a6, a7
+4:
+#if UNALIGNED_ADDRESSES_CHECKED
+ add a3, a3, a11 // readjust a3 with correct misalignment
+#endif
+ bbsi.l a4, 1, 5f
+ bbsi.l a4, 0, 6f
+ leaf_return
+
+ /* Copy 2 bytes. */
+5: l8ui a6, a3, 0
+ l8ui a7, a3, 1
+ addi a3, a3, 2
+ s8i a6, a5, 0
+ s8i a7, a5, 1
+ addi a5, a5, 2
+ bbsi.l a4, 0, 6f
+ leaf_return
+
+ /* Copy 1 byte. */
+6: l8ui a6, a3, 0
+ s8i a6, a5, 0
+ leaf_return
+
+ .end schedule
+
+ .size memcpy, . - memcpy
diff --git a/newlib/libc/machine/xtensa/memset.S b/newlib/libc/machine/xtensa/memset.S
new file mode 100644
index 000000000..dbfbe1a0c
--- /dev/null
+++ b/newlib/libc/machine/xtensa/memset.S
@@ -0,0 +1,170 @@
+/* ANSI C standard library function memset.
+
+ Copyright (c) 2001-2008 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#include "xtensa-asm.h"
+
+/* void *memset (void *dst, int c, size_t length)
+
+ The algorithm is as follows:
+
+ Create a word with c in all byte positions.
+
+ If the destination is aligned, set 16B chunks with a loop, and then
+ finish up with 8B, 4B, 2B, and 1B stores conditional on the length.
+
+ If the destination is unaligned, align it by conditionally
+ setting 1B and/or 2B and then go to aligned case.
+
+ This code tries to use fall-through branches for the common
+ case of an aligned destination (except for the branches to
+ the alignment labels). */
+
+
+/* Byte-by-byte set. */
+
+ .text
+ .begin schedule
+ .align XCHAL_INST_FETCH_WIDTH
+ .literal_position
+__memset_aux:
+
+ /* Skip bytes to get proper alignment for three-byte loop */
+.skip XCHAL_INST_FETCH_WIDTH - 3
+
+.Lbyteset:
+#if XCHAL_HAVE_LOOPS
+ loopnez a4, 2f
+#else
+ beqz a4, 2f
+ add a6, a5, a4 // a6 = ending address
+#endif
+1: s8i a3, a5, 0
+ addi a5, a5, 1
+#if !XCHAL_HAVE_LOOPS
+ bltu a5, a6, 1b
+#endif
+2: leaf_return
+
+
+/* Destination is unaligned. */
+
+ .align 4
+
+.Ldst1mod2: // dst is only byte aligned
+
+ /* Do short sizes byte-by-byte. */
+ bltui a4, 8, .Lbyteset
+
+ /* Set 1 byte. */
+ s8i a3, a5, 0
+ addi a5, a5, 1
+ addi a4, a4, -1
+
+ /* Now retest if dst is aligned. */
+ _bbci.l a5, 1, .Ldstaligned
+
+.Ldst2mod4: // dst has 16-bit alignment
+
+ /* Do short sizes byte-by-byte. */
+ bltui a4, 8, .Lbyteset
+
+ /* Set 2 bytes. */
+ s16i a3, a5, 0
+ addi a5, a5, 2
+ addi a4, a4, -2
+
+ /* dst is now aligned; return to main algorithm */
+ j .Ldstaligned
+
+
+ .align 4
+ .global memset
+ .type memset, @function
+memset:
+ leaf_entry sp, 16
+ /* a2 = dst, a3 = c, a4 = length */
+
+ /* Duplicate character into all bytes of word. */
+ extui a3, a3, 0, 8
+ slli a7, a3, 8
+ or a3, a3, a7
+ slli a7, a3, 16
+ or a3, a3, a7
+
+ mov a5, a2 // copy dst so that a2 is return value
+
+ /* Check if dst is unaligned. */
+ _bbsi.l a2, 0, .Ldst1mod2
+ _bbsi.l a2, 1, .Ldst2mod4
+.Ldstaligned:
+
+ /* Get number of loop iterations with 16B per iteration. */
+ srli a7, a4, 4
+
+ /* Destination is word-aligned. */
+#if XCHAL_HAVE_LOOPS
+ loopnez a7, 2f
+#else
+ beqz a7, 2f
+ slli a6, a7, 4
+ add a6, a6, a5 // a6 = end of last 16B chunk
+#endif
+ /* Set 16 bytes per iteration. */
+1: s32i a3, a5, 0
+ s32i a3, a5, 4
+ s32i a3, a5, 8
+ s32i a3, a5, 12
+ addi a5, a5, 16
+#if !XCHAL_HAVE_LOOPS
+ bltu a5, a6, 1b
+#endif
+
+ /* Set any leftover pieces smaller than 16B. */
+2: bbci.l a4, 3, 3f
+
+ /* Set 8 bytes. */
+ s32i a3, a5, 0
+ s32i a3, a5, 4
+ addi a5, a5, 8
+
+3: bbci.l a4, 2, 4f
+
+ /* Set 4 bytes. */
+ s32i a3, a5, 0
+ addi a5, a5, 4
+
+4: bbci.l a4, 1, 5f
+
+ /* Set 2 bytes. */
+ s16i a3, a5, 0
+ addi a5, a5, 2
+
+5: bbci.l a4, 0, 6f
+
+ /* Set 1 byte. */
+ s8i a3, a5, 0
+6: leaf_return
+
+ .end schedule
+
+ .size memset, . - memset
diff --git a/newlib/libc/machine/xtensa/setjmp.S b/newlib/libc/machine/xtensa/setjmp.S
new file mode 100644
index 000000000..ac5012dc6
--- /dev/null
+++ b/newlib/libc/machine/xtensa/setjmp.S
@@ -0,0 +1,260 @@
+/* setjmp/longjmp functions for Xtensa.
+
+ Copyright (c) 2001-2006 by Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+/* Windowed ABI:
+
+ This implementation relies heavily on the Xtensa register window
+ mechanism. Setjmp flushes all the windows except its own to the
+ stack and then copies registers from the save areas on the stack
+ into the jmp_buf structure, along with the return address of the call
+ to setjmp. Longjmp invalidates all the windows except its own, and
+ then sets things up so that it will return to the right place,
+ using a window underflow to automatically restore the registers.
+
+ Note that it would probably be sufficient to only copy the
+ registers from setjmp's caller into jmp_buf. However, we also copy
+ the save area located at the stack pointer of setjmp's caller.
+ This save area will typically remain intact until the longjmp call.
+ The one exception is when there is an intervening alloca in
+ setjmp's caller. This is certainly an unusual situation and is
+ likely to cause problems in any case (the storage allocated on the
+ stack cannot be safely accessed following the longjmp). As bad as
+ it is, on most systems this situation would not necessarily lead to
+ a catastrophic failure. If we did not preserve the extra save area
+ on Xtensa, however, it would. When setjmp's caller returns after a
+ longjmp, there will be a window underflow; an invalid return
+ address or stack pointer in the save area will almost certainly
+ lead to a crash. Keeping a copy of the extra save area in the
+ jmp_buf avoids this with only a small additional cost. If setjmp
+ and longjmp are ever time-critical, this could be removed.
+
+
+ Call0 ABI:
+
+ Much like other ABIs, this version just saves the necessary registers
+ to the stack and restores them later. Much less needs to be done. */
+
+#include "xtensa-asm.h"
+
+#define SYS_nop 0
+
+
+#if XCHAL_HAVE_WINDOWED && !__XTENSA_CALL0_ABI__
+
+/* int setjmp (jmp_buf env) */
+
+ .text
+ .align 4
+ .literal_position
+ .global setjmp
+ .type setjmp, @function
+setjmp:
+ entry sp, 16
+
+ /* Flush registers. */
+ mov a4, a2 // save a2 (jmp_buf)
+ movi a2, SYS_nop
+ syscall
+ mov a2, a4 // restore a2
+
+ /* Copy the register save area at (sp - 16). */
+ addi a5, a1, -16
+ l32i a3, a5, 0
+ l32i a4, a5, 4
+ s32i a3, a2, 0
+ s32i a4, a2, 4
+ l32i a3, a5, 8
+ l32i a4, a5, 12
+ s32i a3, a2, 8
+ s32i a4, a2, 12
+
+ /* Copy 0-8 words from the register overflow area. */
+ extui a3, a0, 30, 2
+ blti a3, 2, .Lendsj
+ l32i a7, a1, 4
+ slli a4, a3, 4
+ sub a5, a7, a4
+ addi a6, a2, 16
+ addi a7, a7, -16 // a7 = end of register overflow area
+.Lsjloop:
+ l32i a3, a5, 0
+ l32i a4, a5, 4
+ s32i a3, a6, 0
+ s32i a4, a6, 4
+ l32i a3, a5, 8
+ l32i a4, a5, 12
+ s32i a3, a6, 8
+ s32i a4, a6, 12
+ addi a5, a5, 16
+ addi a6, a6, 16
+ blt a5, a7, .Lsjloop
+.Lendsj:
+
+ /* Copy the register save area at sp. */
+ l32i a3, a1, 0
+ l32i a4, a1, 4
+ s32i a3, a2, 48
+ s32i a4, a2, 52
+ l32i a3, a1, 8
+ l32i a4, a1, 12
+ s32i a3, a2, 56
+ s32i a4, a2, 60
+
+ /* Save the return address, including the window size bits. */
+ s32i a0, a2, 64
+
+ movi a2, 0
+ retw
+ .size setjmp, . - setjmp
+
+
+/* void longjmp (jmp_buf env, int val) */
+
+ .align 4
+ .literal_position
+ .global longjmp
+ .type longjmp, @function
+longjmp:
+ entry sp, 16
+ /* a2 == &env, a3 == val */
+
+#if XCHAL_MAYHAVE_ERRATUM_XEA1KWIN
+ /* Using this register triggers early any overflow that a kernel-mode
+ level-one interrupt might otherwise cause. */
+# define AR_WB a15
+#else
+ /* Using this register is more efficient; it triggers less overflows. */
+# define AR_WB a5
+#endif
+ /* Invalidate all but the current window;
+ set WindowStart to (1 << WindowBase). */
+ rsr AR_WB, WINDOWBASE
+ movi a4, 1
+ ssl AR_WB
+ sll a4, a4
+ wsr a4, WINDOWSTART
+ rsync
+
+ /* Return to the return address of the setjmp, using the
+ window size bits from the setjmp call so that the caller
+ will be able to find the return value that we put in a2. */
+
+ l32i a0, a2, 64
+
+ /* Copy the first 4 saved registers from jmp_buf into the save area
+ at the current sp so that the values will be restored to registers
+ when longjmp returns. */
+
+ addi a7, a1, -16
+ l32i a4, a2, 0
+ l32i a5, a2, 4
+ s32i a4, a7, 0
+ s32i a5, a7, 4
+ l32i a4, a2, 8
+ l32i a5, a2, 12
+ s32i a4, a7, 8
+ s32i a5, a7, 12
+
+ /* Copy the remaining 0-8 saved registers. */
+ extui a7, a0, 30, 2
+ blti a7, 2, .Lendlj
+ l32i a8, a2, 52
+ slli a4, a7, 4
+ sub a6, a8, a4
+ addi a5, a2, 16
+ addi a8, a8, -16 // a8 = end of register overflow area
+.Lljloop:
+ l32i a7, a5, 0
+ l32i a4, a5, 4
+ s32i a7, a6, 0
+ s32i a4, a6, 4
+ l32i a7, a5, 8
+ l32i a4, a5, 12
+ s32i a7, a6, 8
+ s32i a4, a6, 12
+ addi a5, a5, 16
+ addi a6, a6, 16
+ blt a6, a8, .Lljloop
+.Lendlj:
+
+ /* The 4 words saved from the register save area at the target's
+ sp are copied back to the target procedure's save area. The
+ only point of this is to prevent a catastrophic failure in
+ case the contents were moved by an alloca after calling
+ setjmp. This is a bit paranoid but it doesn't cost much. */
+
+ l32i a7, a2, 4 // load the target stack pointer
+ addi a7, a7, -16 // find the destination save area
+ l32i a4, a2, 48
+ l32i a5, a2, 52
+ s32i a4, a7, 0
+ s32i a5, a7, 4
+ l32i a4, a2, 56
+ l32i a5, a2, 60
+ s32i a4, a7, 8
+ s32i a5, a7, 12
+
+ /* Return val ? val : 1. */
+ movi a2, 1
+ movnez a2, a3, a3
+
+ retw
+ .size longjmp, . - longjmp
+
+#else /* CALL0 ABI */
+
+ .text
+ .align 4
+ .literal_position
+ .global setjmp
+ .type setjmp, @function
+setjmp:
+ s32i a0, a2, 0
+ s32i a1, a2, 4
+ s32i a12, a2, 8
+ s32i a13, a2, 12
+ s32i a14, a2, 16
+ s32i a15, a2, 20
+ movi a2, 0
+ ret
+ .size setjmp, . - setjmp
+
+ .align 4
+ .literal_position
+ .global longjmp
+ .type longjmp, @function
+longjmp:
+ l32i a0, a2, 0
+ l32i a12, a2, 8
+ l32i a13, a2, 12
+ l32i a14, a2, 16
+ l32i a15, a2, 20
+ l32i a1, a2, 4
+ /* Return val ? val : 1. */
+ movi a2, 1
+ movnez a2, a3, a3
+
+ ret
+ .size longjmp, .-longjmp
+
+#endif /* CALL0 ABI */
diff --git a/newlib/libc/machine/xtensa/strcmp.S b/newlib/libc/machine/xtensa/strcmp.S
new file mode 100644
index 000000000..d0ce9d1fd
--- /dev/null
+++ b/newlib/libc/machine/xtensa/strcmp.S
@@ -0,0 +1,778 @@
+/* ANSI C standard library function strcmp.
+
+ Copyright (c) 2001-20012 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#include "xtensa-asm.h"
+
+#define MASK4 0x40404040
+
+
+#if XCHAL_HAVE_L32R
+ .literal .Lmask0, MASK0
+ .literal .Lmask1, MASK1
+ .literal .Lmask2, MASK2
+ .literal .Lmask3, MASK3
+ .literal .Lmask4, MASK4
+#endif /* XCHAL_HAVE_L32R */
+
+ .text
+ .align 4
+ .literal_position
+ .global strcmp
+ .type strcmp, @function
+strcmp:
+
+#if XCHAL_HAVE_L32R && XCHAL_HAVE_LOOPS && XCHAL_HAVE_DENSITY && __XTENSA_EL__ && XCHAL_HAVE_FLIX3
+/* Fast version for FLIX3 Little Endian */
+
+
+ leaf_entry sp, 16
+ /* a2 = s1, a3 = s2 */
+
+ l8ui a8, a2, 0 // byte 0 from s1
+ l8ui a9, a3, 0 // byte 0 from s2
+ movi a10, 3 // mask
+ movi a5, 0xfffffffc
+ or a11, a2, a3
+ l32r a4, .Lmask0 // mask for byte 0
+ l32r a7, .Lmask4
+ addi a3, a3, -8
+ addi a2, a2, -8
+ and a5, a5, a2
+ bne.w18 a8, a9, .Lretdiff
+ l32i a8, a5, 8 // get word from aligned variant of s1
+
+ bany.w18 a11, a10, .Lnot_aligned
+
+/* s1 is word-aligned; s2 is word-aligned.
+
+ If the zero-overhead loop option is available, use an (almost)
+ infinite zero-overhead loop with conditional exits so we only pay
+ for taken branches when exiting the loop. */
+
+/* New algorithm, relying on the fact that all normal ASCII is between
+ 32 and 127.
+
+ Rather than check all bytes for zero:
+ Take one word (4 bytes). Call it w1.
+ Shift w1 left by one into w1'.
+ Or w1 and w1'. For all normal ASCII bit 6 will be 1; for zero it won't.
+ Check that all 4 bit 6's (one for each byte) are one:
+ If they are, we are definitely not done.
+ If they are not, we are probably done, but need to check for zero. */
+
+.Laligned:
+ /* Loop forever */
+1:
+ loop a0, .Laligned_done
+
+ /* First unrolled loop body. */
+ l32i a9, a3, 8 // get word from s2
+ addi a3, a3, 8 // advance s2 pointer
+ slli a5, a8, 1
+ or a10, a8, a5
+ {l32i a11, a2, 12 // get word from s1+4
+ bne.w18 a8, a9, .Lwne2}
+ l32i a9, a3, 4 // get word from s2+4
+ bnall.w18 a10, a7, .Lprobeq
+
+ /* Second unrolled loop body. */
+ slli a5, a11, 1
+ or a10, a11, a5
+ addi a2, a2, 8 // advance s1 pointer
+ mov a8, a11
+ bne.w18 a11, a9, .Lwne2
+ l32i a8, a2, 8 // get word from s1
+ bnall.w18 a10, a7, .Lprobeq2
+
+.Laligned_done:
+ l32i a8, a2, 8 // get word from s1
+ j 1b
+
+.Lnot_aligned:
+ xor a11, a2, a3 // compare low two bits of s1 and s2
+ bany a11, a10, .Lunaligned // if they have different alignment
+
+ /* s1/s2 are not word-aligned. */
+ movi a5, 0xfffffffc
+ addi a2, a2, 1 // advance s1
+ beqz a9, .Leq // bytes equal, if zero, strings are equal
+ addi a3, a3, 1 // advance s2
+ and a6, a2, a5
+ l32i a8, a6, 8 // get word from s1
+ bnone a2, a10, .Laligned // if s1/s2 now aligned
+ l8ui a8, a2, 8 // byte 1 from s1
+ l8ui a9, a3, 8 // byte 1 from s2
+ addi a2, a2, 1 // advance s1
+ bne a8, a9, .Lretdiff // if different, return difference
+ beqz a8, .Leq // bytes equal, if zero, strings are equal
+ addi a3, a3, 1 // advance s2
+ and a6, a2, a5
+ l32i a8, a6, 8 // get word from s1
+ bnone a2, a10, .Laligned // if s1/s2 now aligned
+ l8ui a8, a2, 8 // byte 2 from s1
+ l8ui a9, a3, 8 // byte 2 from s2
+ addi a2, a2, 1 // advance s1
+ bne a8, a9, .Lretdiff // if different, return difference
+ beqz a8, .Leq // bytes equal, if zero, strings are equal
+ addi a3, a3, 1 // advance s2
+ l32i a8, a2, 8 // get word from s1
+ j .Laligned
+
+/* s1 and s2 have different alignment.
+
+ If the zero-overhead loop option is available, use an (almost)
+ infinite zero-overhead loop with conditional exits so we only pay
+ for taken branches when exiting the loop.
+
+ Note: It is important for this unaligned case to come before the
+ code for aligned strings, because otherwise some of the branches
+ above cannot reach and have to be transformed to branches around
+ jumps. The unaligned code is smaller and the branches can reach
+ over it. */
+
+.Lunaligned:
+ movi.n a8, 0 // set up for the maximum loop count
+ loop a8, .Lretdiff // loop forever (almost anyway)
+ l8ui a8, a2, 8
+ l8ui a9, a3, 8
+ addi a2, a2, 1
+ bne a8, a9, .Lretdiff
+ addi a3, a3, 1
+ beqz a8, .Lretdiff
+.Lretdiff:
+ sub a2, a8, a9
+ leaf_return
+
+
+.Lprobeq2:
+ /* Adjust pointers to account for the loop unrolling. */
+ mov a8, a11
+ addi a2, a2, -4
+ addi a3, a3, 4
+
+ /* align (0 mod 4) */
+.Lprobeq:
+ /* Words are probably equal, but check for sure.
+ If not, loop over the rest of string using normal algorithm. */
+
+ bnone a8, a4, .Leq // if byte 0 is zero
+ l32r a5, .Lmask1 // mask for byte 1
+ l32r a6, .Lmask2 // mask for byte 2
+ bnone a8, a5, .Leq // if byte 1 is zero
+ l32r a7, .Lmask3 // mask for byte 3
+ bnone a8, a6, .Leq // if byte 2 is zero
+ bnone a8, a7, .Leq // if byte 3 is zero
+ /* align (1 mod 4) */
+ addi.n a2, a2, 12 // advance s1 pointer
+ addi.n a3, a3, 4 // advance s2 pointer
+ /* align (1 mod 4) or (2 mod 4) */
+1:
+ loop a0, .Lend // loop forever (a4 is bigger than max iters)
+
+ l32i a11, a2, 0 // get word from s1
+ l32i a9, a3, 0 // get word from s2
+ addi a2, a2, 4 // advance s1 pointer
+ bne a11, a9, .Lwne
+ bnone a11, a4, .Leq // if byte 0 is zero
+ bnone a11, a5, .Leq // if byte 1 is zero
+ bnone a11, a6, .Leq // if byte 2 is zero
+ bnone a11, a7, .Leq // if byte 3 is zero
+ addi a3, a3, 4 // advance s2 pointer
+.Lend:
+ j 1b
+
+ /* Words are equal; some byte is zero. */
+.Leq: movi a2, 0 // return equal
+ leaf_return
+
+.Lwne2: /* Words are not equal. On big-endian processors, if none of the
+ bytes are zero, the return value can be determined by a simple
+ comparison. */
+.Lwne: /* Words are not equal. */
+ xor a2, a8, a9 // get word with nonzero in byte that differs
+ extui a10, a8, 0, 8
+ extui a11, a9, 0, 8
+ movi a5, MASK1 // mask for byte 1
+ bany.w18 a2, a4, .Ldiff0 // if byte 0 differs
+
+ bnone.w18 a8, a4, .Leq // if byte 0 is zero
+ movi a6, MASK2 // mask for byte 2
+ bany.w18 a2, a5, .Ldiff1 // if byte 1 differs
+ extui a10, a8, 24, 8
+ bnone.w18 a8, a5, .Leq // if byte 1 is zero
+ extui a11, a9, 24, 8
+ bany.w18 a2, a6, .Ldiff2 // if byte 2 differs
+ sub a2, a10, a11
+ bnone.w18 a8, a6, .Leq // if byte 2 is zero
+ /* Little-endian is a little more difficult because can't subtract
+ whole words. */
+.Ldiff3:
+ /* Bytes 0-2 are equal; byte 3 is different.
+ For little-endian need to have a sign bit for the difference. */
+ leaf_return
+.Ldiff0:
+ /* Byte 0 is different. */
+ sub a2, a10, a11
+ leaf_return
+
+.Ldiff1:
+ /* Byte 0 is equal; byte 1 is different. */
+ extui a10, a8, 8, 8
+ extui a11, a9, 8, 8
+ sub a2, a10, a11
+ leaf_return
+
+.Ldiff2:
+ /* Bytes 0-1 are equal; byte 2 is different. */
+ extui a10, a8, 16, 8
+ extui a11, a9, 16, 8
+ sub a2, a10, a11
+ leaf_return
+
+#else
+#if XCHAL_HAVE_L32R && XCHAL_HAVE_LOOPS && XCHAL_HAVE_DENSITY && __XTENSA_EL__ && XCHAL_HAVE_PDX4
+/* Fast version for FLIX3 Little Endian */
+
+
+ leaf_entry sp, 16
+ /* a2 = s1, a3 = s2 */
+
+ l8ui a8, a2, 0 // byte 0 from s1
+ l8ui a9, a3, 0 // byte 0 from s2
+ movi a10, 3 // mask
+ movi a5, 0xfffffffc
+ or a11, a2, a3
+ l32r a4, .Lmask0 // mask for byte 0
+ l32r a7, .Lmask4
+ addi a3, a3, -8
+ addi a2, a2, -8
+ and a5, a5, a2
+ bne.w15 a8, a9, .Lretdiff
+ l32i a8, a5, 8 // get word from aligned variant of s1
+
+ bany.w15 a11, a10, .Lnot_aligned
+
+/* s1 is word-aligned; s2 is word-aligned.
+
+ If the zero-overhead loop option is available, use an (almost)
+ infinite zero-overhead loop with conditional exits so we only pay
+ for taken branches when exiting the loop. */
+
+/* New algorithm, relying on the fact that all normal ASCII is between
+ 32 and 127.
+
+ Rather than check all bytes for zero:
+ Take one word (4 bytes). Call it w1.
+ Shift w1 left by one into w1'.
+ Or w1 and w1'. For all normal ASCII bit 6 will be 1; for zero it won't.
+ Check that all 4 bit 6's (one for each byte) are one:
+ If they are, we are definitely not done.
+ If they are not, we are probably done, but need to check for zero. */
+
+.Laligned:
+ /* Loop forever */
+1:
+ loop a0, .Laligned_done
+
+ /* First unrolled loop body. */
+ l32i a9, a3, 8 // get word from s2
+ addi a3, a3, 8 // advance s2 pointer
+ slli a5, a8, 1
+ or a10, a8, a5
+ {
+ bne.w15 a8, a9, .Lwne2
+ l32i a11, a2, 12 // get word from s1+4
+ nop
+ nop
+ }
+ l32i a9, a3, 4 // get word from s2+4
+ bnall.w15 a10, a7, .Lprobeq
+
+ /* Second unrolled loop body. */
+ slli a5, a11, 1
+ or a10, a11, a5
+ addi a2, a2, 8 // advance s1 pointer
+ mov a8, a11
+ bne.w15 a11, a9, .Lwne2
+ l32i a8, a2, 8 // get word from s1
+ bnall.w15 a10, a7, .Lprobeq2
+
+.Laligned_done:
+ l32i a8, a2, 8 // get word from s1
+ j 1b
+
+.Lnot_aligned:
+ xor a11, a2, a3 // compare low two bits of s1 and s2
+ bany a11, a10, .Lunaligned // if they have different alignment
+
+ /* s1/s2 are not word-aligned. */
+ movi a5, 0xfffffffc
+ addi a2, a2, 1 // advance s1
+ beqz a9, .Leq // bytes equal, if zero, strings are equal
+ addi a3, a3, 1 // advance s2
+ and a6, a2, a5
+ l32i a8, a6, 8 // get word from s1
+ bnone a2, a10, .Laligned // if s1/s2 now aligned
+ l8ui a8, a2, 8 // byte 1 from s1
+ l8ui a9, a3, 8 // byte 1 from s2
+ addi a2, a2, 1 // advance s1
+ bne a8, a9, .Lretdiff // if different, return difference
+ beqz a8, .Leq // bytes equal, if zero, strings are equal
+ addi a3, a3, 1 // advance s2
+ and a6, a2, a5
+ l32i a8, a6, 8 // get word from s1
+ bnone a2, a10, .Laligned // if s1/s2 now aligned
+ l8ui a8, a2, 8 // byte 2 from s1
+ l8ui a9, a3, 8 // byte 2 from s2
+ addi a2, a2, 1 // advance s1
+ bne a8, a9, .Lretdiff // if different, return difference
+ beqz a8, .Leq // bytes equal, if zero, strings are equal
+ addi a3, a3, 1 // advance s2
+ l32i a8, a2, 8 // get word from s1
+ j .Laligned
+
+/* s1 and s2 have different alignment.
+
+ If the zero-overhead loop option is available, use an (almost)
+ infinite zero-overhead loop with conditional exits so we only pay
+ for taken branches when exiting the loop.
+
+ Note: It is important for this unaligned case to come before the
+ code for aligned strings, because otherwise some of the branches
+ above cannot reach and have to be transformed to branches around
+ jumps. The unaligned code is smaller and the branches can reach
+ over it. */
+
+.Lunaligned:
+ movi.n a8, 0 // set up for the maximum loop count
+ loop a8, .Lretdiff // loop forever (almost anyway)
+ l8ui a8, a2, 8
+ l8ui a9, a3, 8
+ addi a2, a2, 1
+ bne a8, a9, .Lretdiff
+ addi a3, a3, 1
+ beqz a8, .Lretdiff
+.Lretdiff:
+ sub a2, a8, a9
+ leaf_return
+
+
+.Lprobeq2:
+ /* Adjust pointers to account for the loop unrolling. */
+ mov a8, a11
+ addi a2, a2, -4
+ addi a3, a3, 4
+
+ /* align (0 mod 4) */
+.Lprobeq:
+ /* Words are probably equal, but check for sure.
+ If not, loop over the rest of string using normal algorithm. */
+
+ bnone a8, a4, .Leq // if byte 0 is zero
+ l32r a5, .Lmask1 // mask for byte 1
+ l32r a6, .Lmask2 // mask for byte 2
+ bnone a8, a5, .Leq // if byte 1 is zero
+ l32r a7, .Lmask3 // mask for byte 3
+ bnone a8, a6, .Leq // if byte 2 is zero
+ bnone a8, a7, .Leq // if byte 3 is zero
+ /* align (1 mod 4) */
+ addi.n a2, a2, 12 // advance s1 pointer
+ addi.n a3, a3, 4 // advance s2 pointer
+ /* align (1 mod 4) or (2 mod 4) */
+1:
+ loop a0, .Lend // loop forever (a4 is bigger than max iters)
+
+ l32i a11, a2, 0 // get word from s1
+ l32i a9, a3, 0 // get word from s2
+ addi a2, a2, 4 // advance s1 pointer
+ bne a11, a9, .Lwne
+ bnone a11, a4, .Leq // if byte 0 is zero
+ bnone a11, a5, .Leq // if byte 1 is zero
+ bnone a11, a6, .Leq // if byte 2 is zero
+ bnone a11, a7, .Leq // if byte 3 is zero
+ addi a3, a3, 4 // advance s2 pointer
+.Lend:
+ j 1b
+
+ /* Words are equal; some byte is zero. */
+.Leq: movi a2, 0 // return equal
+ leaf_return
+
+.Lwne2: /* Words are not equal. On big-endian processors, if none of the
+ bytes are zero, the return value can be determined by a simple
+ comparison. */
+.Lwne: /* Words are not equal. */
+ xor a2, a8, a9 // get word with nonzero in byte that differs
+ extui a10, a8, 0, 8
+ extui a11, a9, 0, 8
+ movi a5, MASK1 // mask for byte 1
+ bany.w15 a2, a4, .Ldiff0 // if byte 0 differs
+
+ bnone.w15 a8, a4, .Leq // if byte 0 is zero
+ movi a6, MASK2 // mask for byte 2
+ bany.w15 a2, a5, .Ldiff1 // if byte 1 differs
+ extui a10, a8, 24, 8
+ bnone.w15 a8, a5, .Leq // if byte 1 is zero
+ extui a11, a9, 24, 8
+ bany.w15 a2, a6, .Ldiff2 // if byte 2 differs
+ sub a2, a10, a11
+ bnone.w15 a8, a6, .Leq // if byte 2 is zero
+ /* Little-endian is a little more difficult because can't subtract
+ whole words. */
+.Ldiff3:
+ /* Bytes 0-2 are equal; byte 3 is different.
+ For little-endian need to have a sign bit for the difference. */
+ leaf_return
+.Ldiff0:
+ /* Byte 0 is different. */
+ sub a2, a10, a11
+ leaf_return
+
+.Ldiff1:
+ /* Byte 0 is equal; byte 1 is different. */
+ extui a10, a8, 8, 8
+ extui a11, a9, 8, 8
+ sub a2, a10, a11
+ leaf_return
+
+.Ldiff2:
+ /* Bytes 0-1 are equal; byte 2 is different. */
+ extui a10, a8, 16, 8
+ extui a11, a9, 16, 8
+ sub a2, a10, a11
+ leaf_return
+
+
+#else /* Not FLIX3 */
+ leaf_entry sp, 16
+ /* a2 = s1, a3 = s2 */
+
+ l8ui a8, a2, 0 // byte 0 from s1
+ l8ui a9, a3, 0 // byte 0 from s2
+ movi a10, 3 // mask
+ bne a8, a9, .Lretdiff
+
+ or a11, a2, a3
+ bnone a11, a10, .Laligned
+
+ xor a11, a2, a3 // compare low two bits of s1 and s2
+ bany a11, a10, .Lunaligned // if they have different alignment
+
+ /* s1/s2 are not word-aligned. */
+ addi a2, a2, 1 // advance s1
+ beqz a8, .Leq // bytes equal, if zero, strings are equal
+ addi a3, a3, 1 // advance s2
+ bnone a2, a10, .Laligned // if s1/s2 now aligned
+ l8ui a8, a2, 0 // byte 1 from s1
+ l8ui a9, a3, 0 // byte 1 from s2
+ addi a2, a2, 1 // advance s1
+ bne a8, a9, .Lretdiff // if different, return difference
+ beqz a8, .Leq // bytes equal, if zero, strings are equal
+ addi a3, a3, 1 // advance s2
+ bnone a2, a10, .Laligned // if s1/s2 now aligned
+ l8ui a8, a2, 0 // byte 2 from s1
+ l8ui a9, a3, 0 // byte 2 from s2
+ addi a2, a2, 1 // advance s1
+ bne a8, a9, .Lretdiff // if different, return difference
+ beqz a8, .Leq // bytes equal, if zero, strings are equal
+ addi a3, a3, 1 // advance s2
+ j .Laligned
+
+/* s1 and s2 have different alignment.
+
+ If the zero-overhead loop option is available, use an (almost)
+ infinite zero-overhead loop with conditional exits so we only pay
+ for taken branches when exiting the loop.
+
+ Note: It is important for this unaligned case to come before the
+ code for aligned strings, because otherwise some of the branches
+ above cannot reach and have to be transformed to branches around
+ jumps. The unaligned code is smaller and the branches can reach
+ over it. */
+
+ .align 4
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ /* (2 mod 4) alignment for loop instruction */
+#else
+ /* (1 mod 4) alignment for loop instruction */
+ .byte 0
+ .byte 0
+#endif
+#endif
+.Lunaligned:
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ _movi.n a8, 0 // set up for the maximum loop count
+#else
+ _movi a8, 0 // set up for the maximum loop count
+#endif
+ loop a8, .Lretdiff // loop forever (almost anyway)
+#endif
+.Lnextbyte:
+ l8ui a8, a2, 0
+ l8ui a9, a3, 0
+ addi a2, a2, 1
+ bne a8, a9, .Lretdiff
+ addi a3, a3, 1
+#if XCHAL_HAVE_LOOPS
+ beqz a8, .Lretdiff
+#else
+ bnez a8, .Lnextbyte
+#endif
+.Lretdiff:
+ sub a2, a8, a9
+ leaf_return
+
+/* s1 is word-aligned; s2 is word-aligned.
+
+ If the zero-overhead loop option is available, use an (almost)
+ infinite zero-overhead loop with conditional exits so we only pay
+ for taken branches when exiting the loop. */
+
+/* New algorithm, relying on the fact that all normal ASCII is between
+ 32 and 127.
+
+ Rather than check all bytes for zero:
+ Take one word (4 bytes). Call it w1.
+ Shift w1 left by one into w1'.
+ Or w1 and w1'. For all normal ASCII bit 6 will be 1; for zero it won't.
+ Check that all 4 bit 6's (one for each byte) are one:
+ If they are, we are definitely not done.
+ If they are not, we are probably done, but need to check for zero. */
+
+ .align 4
+#if XCHAL_HAVE_LOOPS
+#if !XCHAL_HAVE_L32R
+ /* (2 mod 4) alignment for loop instruction */
+ .byte 0
+ .byte 0
+#endif
+.Laligned:
+#if XCHAL_HAVE_L32R
+ l32r a4, .Lmask0 // mask for byte 0
+ l32r a7, .Lmask4
+#else
+ const16 a4, MASK0@h
+ const16 a4, MASK0@l
+ const16 a7, MASK4@h
+ const16 a7, MASK4@l
+#endif
+ /* Loop forever */
+1:
+ loop a0, .Laligned_done
+
+ /* First unrolled loop body. */
+ l32i a8, a2, 0 // get word from s1
+ l32i a9, a3, 0 // get word from s2
+ slli a5, a8, 1
+ bne a8, a9, .Lwne2
+ or a9, a8, a5
+ bnall a9, a7, .Lprobeq
+
+ /* Second unrolled loop body. */
+ l32i a8, a2, 4 // get word from s1+4
+ l32i a9, a3, 4 // get word from s2+4
+ slli a5, a8, 1
+ bne a8, a9, .Lwne2
+ or a9, a8, a5
+ bnall a9, a7, .Lprobeq2
+
+ addi a2, a2, 8 // advance s1 pointer
+ addi a3, a3, 8 // advance s2 pointer
+.Laligned_done:
+ j 1b
+
+.Lprobeq2:
+ /* Adjust pointers to account for the loop unrolling. */
+ addi a2, a2, 4
+ addi a3, a3, 4
+
+#else /* !XCHAL_HAVE_LOOPS */
+
+.Laligned:
+ movi a4, MASK0 // mask for byte 0
+ movi a7, MASK4
+ j .Lfirstword
+.Lnextword:
+ addi a2, a2, 4 // advance s1 pointer
+ addi a3, a3, 4 // advance s2 pointer
+.Lfirstword:
+ l32i a8, a2, 0 // get word from s1
+ l32i a9, a3, 0 // get word from s2
+ slli a5, a8, 1
+ bne a8, a9, .Lwne2
+ or a9, a8, a5
+ ball a9, a7, .Lnextword
+#endif /* !XCHAL_HAVE_LOOPS */
+
+ /* align (0 mod 4) */
+.Lprobeq:
+ /* Words are probably equal, but check for sure.
+ If not, loop over the rest of string using normal algorithm. */
+
+ bnone a8, a4, .Leq // if byte 0 is zero
+#if XCHAL_HAVE_L32R
+ l32r a5, .Lmask1 // mask for byte 1
+ l32r a6, .Lmask2 // mask for byte 2
+ bnone a8, a5, .Leq // if byte 1 is zero
+ l32r a7, .Lmask3 // mask for byte 3
+ bnone a8, a6, .Leq // if byte 2 is zero
+ bnone a8, a7, .Leq // if byte 3 is zero
+ /* align (1 mod 4) */
+#else
+ const16 a5, MASK1@h // mask for byte 1
+ const16 a5, MASK1@l
+ bnone a8, a5, .Leq // if byte 1 is zero
+ const16 a6, MASK2@h // mask for byte 2
+ const16 a6, MASK2@l
+ bnone a8, a6, .Leq // if byte 2 is zero
+ const16 a7, MASK3@h // mask for byte 3
+ const16 a7, MASK3@l
+ bnone a8, a7, .Leq // if byte 3 is zero
+ /* align (2 mod 4) */
+#endif /* XCHAL_HAVE_L32R */
+#if XCHAL_HAVE_DENSITY
+ addi.n a2, a2, 4 // advance s1 pointer
+ addi.n a3, a3, 4 // advance s2 pointer
+ /* align (1 mod 4) or (2 mod 4) */
+#else
+ addi a2, a2, 4 // advance s1 pointer
+ addi a3, a3, 4 // advance s2 pointer
+ or a1, a1, a1 // nop
+#if !XCHAL_HAVE_L32R
+ or a1, a1, a1 // nop
+#endif
+ /* align (2 mod 4) */
+#endif /* XCHAL_HAVE_DENSITY */
+#if XCHAL_HAVE_LOOPS
+1:
+ loop a0, .Leq // loop forever (a4 is bigger than max iters)
+ l32i a8, a2, 0 // get word from s1
+ l32i a9, a3, 0 // get word from s2
+ addi a2, a2, 4 // advance s1 pointer
+ bne a8, a9, .Lwne
+ bnone a8, a4, .Leq // if byte 0 is zero
+ bnone a8, a5, .Leq // if byte 1 is zero
+ bnone a8, a6, .Leq // if byte 2 is zero
+ bnone a8, a7, .Leq // if byte 3 is zero
+ addi a3, a3, 4 // advance s2 pointer
+ j 1b
+#else /* !XCHAL_HAVE_LOOPS */
+
+ j .Lfirstword2
+.Lnextword2:
+ addi a3, a3, 4 // advance s2 pointer
+.Lfirstword2:
+ l32i a8, a2, 0 // get word from s1
+ l32i a9, a3, 0 // get word from s2
+ addi a2, a2, 4 // advance s1 pointer
+ bne a8, a9, .Lwne
+ bnone a8, a4, .Leq // if byte 0 is zero
+ bnone a8, a5, .Leq // if byte 1 is zero
+ bnone a8, a6, .Leq // if byte 2 is zero
+ bany a8, a7, .Lnextword2 // if byte 3 is zero
+#endif /* !XCHAL_HAVE_LOOPS */
+
+ /* Words are equal; some byte is zero. */
+.Leq: movi a2, 0 // return equal
+ leaf_return
+
+.Lwne2: /* Words are not equal. On big-endian processors, if none of the
+ bytes are zero, the return value can be determined by a simple
+ comparison. */
+#ifdef __XTENSA_EB__
+ or a10, a8, a5
+ bnall a10, a7, .Lsomezero
+ bgeu a8, a9, .Lposreturn
+ movi a2, -1
+ leaf_return
+.Lposreturn:
+ movi a2, 1
+ leaf_return
+.Lsomezero: // There is probably some zero byte.
+#endif /* __XTENSA_EB__ */
+.Lwne: /* Words are not equal. */
+ xor a2, a8, a9 // get word with nonzero in byte that differs
+ bany a2, a4, .Ldiff0 // if byte 0 differs
+ movi a5, MASK1 // mask for byte 1
+ bnone a8, a4, .Leq // if byte 0 is zero
+ bany a2, a5, .Ldiff1 // if byte 1 differs
+ movi a6, MASK2 // mask for byte 2
+ bnone a8, a5, .Leq // if byte 1 is zero
+ bany a2, a6, .Ldiff2 // if byte 2 differs
+ bnone a8, a6, .Leq // if byte 2 is zero
+#ifdef __XTENSA_EB__
+.Ldiff3:
+.Ldiff2:
+.Ldiff1:
+ /* Byte 0 is equal (at least) and there is a difference before a zero
+ byte. Just subtract words to get the return value.
+ The high order equal bytes cancel, leaving room for the sign. */
+ sub a2, a8, a9
+ leaf_return
+
+.Ldiff0:
+ /* Need to make room for the sign, so can't subtract whole words. */
+ extui a10, a8, 24, 8
+ extui a11, a9, 24, 8
+ sub a2, a10, a11
+ leaf_return
+
+#else /* !__XTENSA_EB__ */
+ /* Little-endian is a little more difficult because can't subtract
+ whole words. */
+.Ldiff3:
+ /* Bytes 0-2 are equal; byte 3 is different.
+ For little-endian need to have a sign bit for the difference. */
+ extui a10, a8, 24, 8
+ extui a11, a9, 24, 8
+ sub a2, a10, a11
+ leaf_return
+
+.Ldiff0:
+ /* Byte 0 is different. */
+ extui a10, a8, 0, 8
+ extui a11, a9, 0, 8
+ sub a2, a10, a11
+ leaf_return
+
+.Ldiff1:
+ /* Byte 0 is equal; byte 1 is different. */
+ extui a10, a8, 8, 8
+ extui a11, a9, 8, 8
+ sub a2, a10, a11
+ leaf_return
+
+.Ldiff2:
+ /* Bytes 0-1 are equal; byte 2 is different. */
+ extui a10, a8, 16, 8
+ extui a11, a9, 16, 8
+ sub a2, a10, a11
+ leaf_return
+
+#endif /* !__XTENSA_EB */
+#endif /* FLIX3*/
+#endif /* FLIX3*/
+
+ .size strcmp, . - strcmp
diff --git a/newlib/libc/machine/xtensa/strcpy.S b/newlib/libc/machine/xtensa/strcpy.S
new file mode 100644
index 000000000..167aa9e08
--- /dev/null
+++ b/newlib/libc/machine/xtensa/strcpy.S
@@ -0,0 +1,235 @@
+/* ANSI C standard library function strcpy.
+
+ Copyright (c) 2001-2008 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#include "xtensa-asm.h"
+
+ .text
+ .begin schedule
+ .align 4
+ .literal_position
+ .global strcpy
+ .type strcpy, @function
+strcpy:
+ leaf_entry sp, 16
+ /* a2 = dst, a3 = src */
+
+ mov a10, a2 // leave dst in return value register
+ movi a4, MASK0
+ movi a5, MASK1
+ movi a6, MASK2
+ movi a7, MASK3
+ bbsi.l a3, 0, .Lsrc1mod2
+ bbsi.l a3, 1, .Lsrc2mod4
+.Lsrcaligned:
+
+ /* Check if the destination is aligned. */
+ movi a8, 3
+ bnone a10, a8, .Laligned
+
+ j .Ldstunaligned
+
+.Lsrc1mod2: // src address is odd
+ l8ui a8, a3, 0 // get byte 0
+ addi a3, a3, 1 // advance src pointer
+ s8i a8, a10, 0 // store byte 0
+ beqz a8, 1f // if byte 0 is zero
+ addi a10, a10, 1 // advance dst pointer
+ bbci.l a3, 1, .Lsrcaligned // if src is now word-aligned
+
+.Lsrc2mod4: // src address is 2 mod 4
+ l8ui a8, a3, 0 // get byte 0
+ /* 1-cycle interlock */
+ s8i a8, a10, 0 // store byte 0
+ beqz a8, 1f // if byte 0 is zero
+ l8ui a8, a3, 1 // get byte 0
+ addi a3, a3, 2 // advance src pointer
+ s8i a8, a10, 1 // store byte 0
+ addi a10, a10, 2 // advance dst pointer
+ bnez a8, .Lsrcaligned
+1: leaf_return
+
+
+/* dst is word-aligned; src is word-aligned. */
+
+ .align 4
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ /* (2 mod 4) alignment for loop instruction */
+#else
+ /* (1 mod 4) alignment for loop instruction */
+ .byte 0
+ .byte 0
+#endif
+.Laligned:
+#if XCHAL_HAVE_DENSITY
+ _movi.n a8, 0 // set up for the maximum loop count
+#else
+ _movi a8, 0 // set up for the maximum loop count
+#endif
+ loop a8, .Lz3 // loop forever (almost anyway)
+ l32i a8, a3, 0 // get word from src
+ addi a3, a3, 4 // advance src pointer
+ bnone a8, a4, .Lz0 // if byte 0 is zero
+ bnone a8, a5, .Lz1 // if byte 1 is zero
+ bnone a8, a6, .Lz2 // if byte 2 is zero
+ s32i a8, a10, 0 // store word to dst
+ bnone a8, a7, .Lz3 // if byte 3 is zero
+ addi a10, a10, 4 // advance dst pointer
+
+#else /* !XCHAL_HAVE_LOOPS */
+
+1: addi a10, a10, 4 // advance dst pointer
+.Laligned:
+ l32i a8, a3, 0 // get word from src
+ addi a3, a3, 4 // advance src pointer
+ bnone a8, a4, .Lz0 // if byte 0 is zero
+ bnone a8, a5, .Lz1 // if byte 1 is zero
+ bnone a8, a6, .Lz2 // if byte 2 is zero
+ s32i a8, a10, 0 // store word to dst
+ bany a8, a7, 1b // if byte 3 is zero
+#endif /* !XCHAL_HAVE_LOOPS */
+
+.Lz3: /* Byte 3 is zero. */
+ leaf_return
+
+.Lz0: /* Byte 0 is zero. */
+#ifdef __XTENSA_EB__
+ movi a8, 0
+#endif
+ s8i a8, a10, 0
+ leaf_return
+
+.Lz1: /* Byte 1 is zero. */
+#ifdef __XTENSA_EB__
+ extui a8, a8, 16, 16
+#endif
+ s16i a8, a10, 0
+ leaf_return
+
+.Lz2: /* Byte 2 is zero. */
+#ifdef __XTENSA_EB__
+ extui a8, a8, 16, 16
+#endif
+ s16i a8, a10, 0
+ movi a8, 0
+ s8i a8, a10, 2
+ leaf_return
+
+#if 1
+/* For now just use byte copy loop for the unaligned destination case. */
+
+ .align 4
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ /* (2 mod 4) alignment for loop instruction */
+#else
+ /* (1 mod 4) alignment for loop instruction */
+ .byte 0
+ .byte 0
+#endif
+#endif
+.Ldstunaligned:
+
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ _movi.n a8, 0 // set up for the maximum loop count
+#else
+ _movi a8, 0 // set up for the maximum loop count
+#endif
+ loop a8, 2f // loop forever (almost anyway)
+#endif
+1: l8ui a8, a3, 0
+ addi a3, a3, 1
+ s8i a8, a10, 0
+ addi a10, a10, 1
+#if XCHAL_HAVE_LOOPS
+ beqz a8, 2f
+#else
+ bnez a8, 1b
+#endif
+2: leaf_return
+
+#else /* 0 */
+
+/* This code is not functional yet. */
+
+.Ldstunaligned:
+ l32i a9, a2, 0 // load word from dst
+#ifdef __XTENSA_EB__
+ ssa8b a9 // rotate by dst alignment so that
+ src a9, a9, a9 // shift in loop will put back in place
+ ssa8l a9 // shift left by byte*8
+#else
+ ssa8l a9 // rotate by dst alignment so that
+ src a9, a9, a9 // shift in loop will put back in place
+ ssa8b a9 // shift left by 32-byte*8
+#endif
+
+/* dst is word-aligned; src is unaligned. */
+
+.Ldstunalignedloop:
+ l32i a8, a3, 0 // get word from src
+ /* 1-cycle interlock */
+ bnone a8, a4, .Lu0 // if byte 0 is zero
+ bnone a8, a5, .Lu1 // if byte 1 is zero
+ bnone a8, a6, .Lu2 // if byte 2 is zero
+ src a9, a8, a9 // combine last word and this word
+ s32i a9, a10, 0 // store word to dst
+ bnone a8, a7, .Lu3 // if byte 3 is nonzero, iterate
+ l32i a9, a3, 4 // get word from src
+ addi a3, a3, 8 // advance src pointer
+ bnone a9, a4, .Lu4 // if byte 0 is zero
+ bnone a9, a5, .Lu5 // if byte 1 is zero
+ bnone a9, a6, .Lu6 // if byte 2 is zero
+ src a8, a9, a8 // combine last word and this word
+ s32i a8, a10, 4 // store word to dst
+ addi a10, a10, 8 // advance dst pointer
+ bany a8, a7, .Ldstunalignedloop // if byte 3 is nonzero, iterate
+
+ /* Byte 7 is zero. */
+.Lu7: leaf_return
+
+.Lu0: /* Byte 0 is zero. */
+#ifdef __XTENSA_EB__
+ movi a8, 0
+#endif
+ s8i a8, a10, 0
+ leaf_return
+
+.Lu1: /* Byte 1 is zero. */
+#ifdef __XTENSA_EB__
+ extui a8, a8, 16, 16
+#endif
+ s16i a8, a10, 0
+ leaf_return
+
+.Lu2: /* Byte 2 is zero. */
+ s16i a8, a10, 0
+ movi a8, 0
+ s8i a8, a10, 2
+ leaf_return
+
+#endif /* 0 */
+ .end schedule
+
+ .size strcpy, . - strcpy
diff --git a/newlib/libc/machine/xtensa/strlen.S b/newlib/libc/machine/xtensa/strlen.S
new file mode 100644
index 000000000..6560a3185
--- /dev/null
+++ b/newlib/libc/machine/xtensa/strlen.S
@@ -0,0 +1,115 @@
+/* ANSI C standard library function strlen.
+
+ Copyright (c) 2001-2008 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#include "xtensa-asm.h"
+
+ .text
+ .begin schedule
+ .align 4
+ .literal_position
+ .global strlen
+ .type strlen, @function
+strlen:
+ leaf_entry sp, 16
+ /* a2 = s */
+
+ addi a3, a2, -4 // because we overincrement at the end
+ movi a4, MASK0
+ movi a5, MASK1
+ movi a6, MASK2
+ movi a7, MASK3
+ bbsi.l a2, 0, .L1mod2
+ bbsi.l a2, 1, .L2mod4
+ j .Laligned
+
+.L1mod2: // address is odd
+ l8ui a8, a3, 4 // get byte 0
+ addi a3, a3, 1 // advance string pointer
+ beqz a8, .Lz3 // if byte 0 is zero
+ bbci.l a3, 1, .Laligned // if string pointer is now word-aligned
+
+.L2mod4: // address is 2 mod 4
+ addi a3, a3, 2 // advance ptr for aligned access
+ l32i a8, a3, 0 // get word with first two bytes of string
+ bnone a8, a6, .Lz2 // if byte 2 (of word, not string) is zero
+ bany a8, a7, .Laligned // if byte 3 (of word, not string) is nonzero
+
+ /* Byte 3 is zero. */
+ addi a3, a3, 3 // point to zero byte
+ sub a2, a3, a2 // subtract to get length
+ leaf_return
+
+
+/* String is word-aligned. */
+
+ .align 4
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ /* (2 mod 4) alignment for loop instruction */
+#else
+ /* (1 mod 4) alignment for loop instruction */
+ .byte 0
+ .byte 0
+#endif
+#endif
+.Laligned:
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ _movi.n a8, 0 // set up for the maximum loop count
+#else
+ _movi a8, 0 // set up for the maximum loop count
+#endif
+ loop a8, .Lz3 // loop forever (almost anyway)
+#endif
+1: l32i a8, a3, 4 // get next word of string
+ addi a3, a3, 4 // advance string pointer
+ bnone a8, a4, .Lz0 // if byte 0 is zero
+ bnone a8, a5, .Lz1 // if byte 1 is zero
+ bnone a8, a6, .Lz2 // if byte 2 is zero
+#if XCHAL_HAVE_LOOPS
+ bnone a8, a7, .Lz3 // if byte 3 is zero
+#else
+ bany a8, a7, 1b // repeat if byte 3 is non-zero
+#endif
+
+.Lz3: /* Byte 3 is zero. */
+ addi a3, a3, 3 // point to zero byte
+ /* Fall through.... */
+
+.Lz0: /* Byte 0 is zero. */
+ sub a2, a3, a2 // subtract to get length
+ leaf_return
+
+.Lz1: /* Byte 1 is zero. */
+ addi a3, a3, 1 // point to zero byte
+ sub a2, a3, a2 // subtract to get length
+ leaf_return
+
+.Lz2: /* Byte 2 is zero. */
+ addi a3, a3, 2 // point to zero byte
+ sub a2, a3, a2 // subtract to get length
+ leaf_return
+
+ .end schedule
+
+ .size strlen, . - strlen
diff --git a/newlib/libc/machine/xtensa/strncpy.S b/newlib/libc/machine/xtensa/strncpy.S
new file mode 100644
index 000000000..dc9363c2a
--- /dev/null
+++ b/newlib/libc/machine/xtensa/strncpy.S
@@ -0,0 +1,258 @@
+/* ANSI C standard library function strncpy.
+
+ Copyright (c) 2001-2008 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#include "xtensa-asm.h"
+
+ .text
+.begin schedule
+ .align 4
+ .literal_position
+__strncpy_aux:
+
+.Lsrc1mod2: // src address is odd
+ l8ui a8, a3, 0 // get byte 0
+ addi a3, a3, 1 // advance src pointer
+ s8i a8, a10, 0 // store byte 0
+ addi a4, a4, -1 // decrement n
+ beqz a4, .Lret // if n is zero
+ addi a10, a10, 1 // advance dst pointer
+ beqz a8, .Lfill // if byte 0 is zero
+ bbci.l a3, 1, .Lsrcaligned // if src is now word-aligned
+
+.Lsrc2mod4: // src address is 2 mod 4
+ l8ui a8, a3, 0 // get byte 0
+ addi a4, a4, -1 // decrement n
+ s8i a8, a10, 0 // store byte 0
+ beqz a4, .Lret // if n is zero
+ addi a10, a10, 1 // advance dst pointer
+ beqz a8, .Lfill // if byte 0 is zero
+ l8ui a8, a3, 1 // get byte 0
+ addi a3, a3, 2 // advance src pointer
+ s8i a8, a10, 0 // store byte 0
+ addi a4, a4, -1 // decrement n
+ beqz a4, .Lret // if n is zero
+ addi a10, a10, 1 // advance dst pointer
+ bnez a8, .Lsrcaligned
+ j .Lfill
+
+.Lret:
+ leaf_return
+
+
+ .align 4
+ .global strncpy
+ .type strncpy, @function
+strncpy:
+ leaf_entry sp, 16
+ /* a2 = dst, a3 = src */
+
+ mov a10, a2 // leave dst in return value register
+ beqz a4, .Lret // if n is zero
+
+ movi a11, MASK0
+ movi a5, MASK1
+ movi a6, MASK2
+ movi a7, MASK3
+ bbsi.l a3, 0, .Lsrc1mod2
+ bbsi.l a3, 1, .Lsrc2mod4
+.Lsrcaligned:
+
+ /* Check if the destination is aligned. */
+ movi a8, 3
+ bnone a10, a8, .Laligned
+
+ j .Ldstunaligned
+
+
+/* Fill the dst with zeros -- n is at least 1. */
+
+.Lfill:
+ movi a9, 0
+ bbsi.l a10, 0, .Lfill1mod2
+ bbsi.l a10, 1, .Lfill2mod4
+.Lfillaligned:
+ blti a4, 4, .Lfillcleanup
+
+ /* Loop filling complete words with zero. */
+#if XCHAL_HAVE_LOOPS
+
+ srai a8, a4, 2
+ loop a8, 1f
+ s32i a9, a10, 0
+ addi a10, a10, 4
+
+1: slli a8, a8, 2
+ sub a4, a4, a8
+
+#else /* !XCHAL_HAVE_LOOPS */
+
+1: s32i a9, a10, 0
+ addi a10, a10, 4
+ addi a4, a4, -4
+ bgei a4, 4, 1b
+
+#endif /* !XCHAL_HAVE_LOOPS */
+
+ beqz a4, 2f
+
+.Lfillcleanup:
+ /* Fill leftover (1 to 3) bytes with zero. */
+ s8i a9, a10, 0 // store byte 0
+ addi a4, a4, -1 // decrement n
+ addi a10, a10, 1
+ bnez a4, .Lfillcleanup
+
+2: leaf_return
+
+.Lfill1mod2: // dst address is odd
+ s8i a9, a10, 0 // store byte 0
+ addi a4, a4, -1 // decrement n
+ beqz a4, 2b // if n is zero
+ addi a10, a10, 1 // advance dst pointer
+ bbci.l a10, 1, .Lfillaligned // if dst is now word-aligned
+
+.Lfill2mod4: // dst address is 2 mod 4
+ s8i a9, a10, 0 // store byte 0
+ addi a4, a4, -1 // decrement n
+ beqz a4, 2b // if n is zero
+ s8i a9, a10, 1 // store byte 1
+ addi a4, a4, -1 // decrement n
+ beqz a4, 2b // if n is zero
+ addi a10, a10, 2 // advance dst pointer
+ j .Lfillaligned
+
+
+/* dst is word-aligned; src is word-aligned; n is at least 1. */
+
+ .align 4
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ /* (2 mod 4) alignment for loop instruction */
+#else
+ /* (1 mod 4) alignment for loop instruction */
+ .byte 0
+ .byte 0
+#endif
+#endif
+.Laligned:
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ _movi.n a8, 0 // set up for the maximum loop count
+#else
+ _movi a8, 0 // set up for the maximum loop count
+#endif
+ loop a8, 1f // loop forever (almost anyway)
+ blti a4, 5, .Ldstunaligned // n is near limit; do one at a time
+ l32i a8, a3, 0 // get word from src
+ addi a3, a3, 4 // advance src pointer
+ bnone a8, a11, .Lz0 // if byte 0 is zero
+ bnone a8, a5, .Lz1 // if byte 1 is zero
+ bnone a8, a6, .Lz2 // if byte 2 is zero
+ s32i a8, a10, 0 // store word to dst
+ addi a4, a4, -4 // decrement n
+ addi a10, a10, 4 // advance dst pointer
+ bnone a8, a7, .Lfill // if byte 3 is zero
+1:
+
+#else /* !XCHAL_HAVE_LOOPS */
+
+1: blti a4, 5, .Ldstunaligned // n is near limit; do one at a time
+ l32i a8, a3, 0 // get word from src
+ addi a3, a3, 4 // advance src pointer
+ bnone a8, a11, .Lz0 // if byte 0 is zero
+ bnone a8, a5, .Lz1 // if byte 1 is zero
+ bnone a8, a6, .Lz2 // if byte 2 is zero
+ s32i a8, a10, 0 // store word to dst
+ addi a4, a4, -4 // decrement n
+ addi a10, a10, 4 // advance dst pointer
+ bany a8, a7, 1b // no zeroes
+#endif /* !XCHAL_HAVE_LOOPS */
+
+ j .Lfill
+
+.Lz0: /* Byte 0 is zero. */
+#ifdef __XTENSA_EB__
+ movi a8, 0
+#endif
+ s8i a8, a10, 0
+ addi a4, a4, -1 // decrement n
+ addi a10, a10, 1 // advance dst pointer
+ j .Lfill
+
+.Lz1: /* Byte 1 is zero. */
+#ifdef __XTENSA_EB__
+ extui a8, a8, 16, 16
+#endif
+ s16i a8, a10, 0
+ addi a4, a4, -2 // decrement n
+ addi a10, a10, 2 // advance dst pointer
+ j .Lfill
+
+.Lz2: /* Byte 2 is zero. */
+#ifdef __XTENSA_EB__
+ extui a8, a8, 16, 16
+#endif
+ s16i a8, a10, 0
+ movi a8, 0
+ s8i a8, a10, 2
+ addi a4, a4, -3 // decrement n
+ addi a10, a10, 3 // advance dst pointer
+ j .Lfill
+
+ .align 4
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ /* (2 mod 4) alignment for loop instruction */
+#else
+ /* (1 mod 4) alignment for loop instruction */
+ .byte 0
+ .byte 0
+#endif
+#endif
+.Ldstunaligned:
+
+#if XCHAL_HAVE_LOOPS
+#if XCHAL_HAVE_DENSITY
+ _movi.n a8, 0 // set up for the maximum loop count
+#else
+ _movi a8, 0 // set up for the maximum loop count
+#endif
+ loop a8, 2f // loop forever (almost anyway)
+#endif
+1: l8ui a8, a3, 0
+ addi a3, a3, 1
+ s8i a8, a10, 0
+ addi a4, a4, -1
+ beqz a4, 3f
+ addi a10, a10, 1
+#if XCHAL_HAVE_LOOPS
+ beqz a8, 2f
+#else
+ bnez a8, 1b
+#endif
+2: j .Lfill
+
+3: leaf_return
+.end schedule
+
+ .size strncpy, . - strncpy
diff --git a/newlib/libc/machine/xtensa/xtensa-asm.h b/newlib/libc/machine/xtensa/xtensa-asm.h
new file mode 100644
index 000000000..ace4c0289
--- /dev/null
+++ b/newlib/libc/machine/xtensa/xtensa-asm.h
@@ -0,0 +1,72 @@
+/* Copyright (c) 2006 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#include <xtensa/config/core-isa.h>
+
+# Define macros for leaf function entry and return, supporting either the
+# standard register windowed ABI or the non-windowed call0 ABI. These
+# macros do not allocate any extra stack space, so they only work for
+# leaf functions that do not need to spill anything to the stack.
+
+ .macro leaf_entry reg, size
+#if XCHAL_HAVE_WINDOWED && !__XTENSA_CALL0_ABI__
+ entry \reg, \size
+#else
+ /* do nothing */
+#endif
+ .endm
+
+ .macro leaf_return
+#if XCHAL_HAVE_WINDOWED && !__XTENSA_CALL0_ABI__
+ retw
+#else
+ ret
+#endif
+ .endm
+
+ .macro src_b r, w0, w1
+#ifdef __XTENSA_EB__
+ src \r, \w0, \w1
+#else
+ src \r, \w1, \w0
+#endif
+ .endm
+
+ .macro ssa8 r
+#ifdef __XTENSA_EB__
+ ssa8b \r
+#else
+ ssa8l \r
+#endif
+ .endm
+
+#if XCHAL_HAVE_BE
+#define MASK0 0xff000000
+#define MASK1 0x00ff0000
+#define MASK2 0x0000ff00
+#define MASK3 0x000000ff
+#else
+#define MASK0 0x000000ff
+#define MASK1 0x0000ff00
+#define MASK2 0x00ff0000
+#define MASK3 0xff000000
+#endif
+
diff --git a/newlib/libc/machine/xtensa/xtensa.tex b/newlib/libc/machine/xtensa/xtensa.tex
new file mode 100644
index 000000000..1a5bf65e7
--- /dev/null
+++ b/newlib/libc/machine/xtensa/xtensa.tex
@@ -0,0 +1,72 @@
+@node Xtensa
+@chapter Functions for Xtensa Processors
+
+This chapter describes machine-dependent functions that are included
+in the C library when it is built for Xtensa processors.
+
+@menu
+* setjmp:: Save stack environment
+* longjmp:: Non-local goto
+@end menu
+
+@page
+@node setjmp
+@section @code{setjmp}---save stack environment
+@findex setjmp
+@strong{Synopsis}
+@example
+#include <setjmp.h>
+int setjmp(jmp_buf env);
+
+@end example
+@strong{Description}@*
+@code{setjmp} and @code{longjmp} are useful for dealing with errors
+and interrupts encountered in a low-level subroutine of a program.
+@code{setjmp} saves the stack context/environment in @code{env} for
+later use by @code{longjmp}. The stack context will be invalidated if
+the function which called @code{setjmp} returns.
+
+@*
+@strong{Returns}@*
+@code{setjmp} returns 0 if returning directly, and non-zero when
+returning from @code{longjmp} using the saved context.
+
+@*
+@strong{Portability}@*
+@code{setjmp} is ANSI C and POSIX.1.
+
+setjmp requires no supporting OS subroutines.
+
+@*
+@page
+@node longjmp
+@section @code{longjmp}---non-local goto
+@findex longjmp
+@strong{Synopsis}
+@example
+#include <setjmp.h>
+void longjmp(jmp_buf env, int val);
+
+@end example
+@strong{Description}@*
+@code{longjmp} and @code{setjmp} are useful for dealing with errors
+and interrupts encountered in a low-level subroutine of a program.
+@code{longjmp} restores the environment saved by the last call of
+@code{setjmp} with the corresponding @code{env} argument. After
+@code{longjmp} is completed, program execution continues as if the
+corresponding call of @code{setjmp} had just returned the value
+@code{val}. @code{longjmp} cannot cause 0 to be returned. If
+@code{longjmp} is invoked with a second argument of 0, 1 will be
+returned instead.
+
+@*
+@strong{Returns}@*
+This function never returns.
+
+@*
+@strong{Portability}@*
+@code{longjmp} is ANSI C and POSIX.1.
+
+longjmp requires no supporting OS subroutines.
+
+@*
--
2.34.1
next prev parent reply other threads:[~2023-05-15 13:51 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-11 6:03 [PATCH, RFC 0/8] " Alexey Lapshin
2023-05-11 6:05 ` [PATCH, RFC 1/8] newlib: add system headers from include/$(sys_dir)/*/*.h Alexey Lapshin
2023-05-11 6:12 ` [PATCH, RFC 2/8] libc: sys: add xtensa port Alexey Lapshin
2023-05-11 6:18 ` [PATCH, RFC 3/8] libm: " Alexey Lapshin
2023-05-11 6:20 ` [PATCH, RFC 4/8] libc: " Alexey Lapshin
2023-05-11 6:21 ` [PATCH, RFC 5/8] libm: add attribute weak for __ieee754_sqrtf Alexey Lapshin
2023-05-11 6:22 ` [PATCH, RFC 6/8] libgloss: libnosys: add xtensa port Alexey Lapshin
2023-05-11 6:23 ` [PATCH, RFC 7/8] libgloss: " Alexey Lapshin
2023-05-11 6:25 ` [PATCH, RFC 8/8] libc: fix xtensa PSRAM cache bug Alexey Lapshin
2023-05-12 9:18 ` [PATCH, RFC 0/8] add xtensa port Max Filippov
2023-05-15 13:45 ` [PATCH, RFC v2 " Alexey Lapshin
2023-05-15 13:47 ` [PATCH, RFC v2 1/8] newlib: add system headers from include/$(sys_dir)/*/*.h Alexey Lapshin
2023-05-15 13:48 ` [PATCH, RFC v2 2/8] libc: sys: add xtensa port Alexey Lapshin
2023-05-15 13:49 ` [PATCH, RFC v2 3/8] libm: " Alexey Lapshin
2023-05-15 13:50 ` Alexey Lapshin [this message]
2023-05-15 13:51 ` [PATCH, RFC v2 5/8] libm: add attribute weak for __ieee754_sqrtf Alexey Lapshin
2023-05-15 13:53 ` [PATCH, RFC v2 6/8] libgloss: libnosys: add xtensa port Alexey Lapshin
2023-05-15 13:54 ` [PATCH, RFC v2 7/8] libgloss: " Alexey Lapshin
2023-05-15 13:55 ` [PATCH, RFC v2 8/8] libc: xtensa: fix PSRAM cache bug Alexey Lapshin
2023-05-30 19:58 ` [PATCH, RFC v2 0/8] add xtensa port Jeff Johnston
2023-05-31 7:53 ` Alexey Lapshin
2023-08-09 20:00 ` [PATCH, RFC v3 0/3] " Alexey Lapshin
2023-08-09 20:02 ` [PATCH, RFC v3 1/3] libc: fix nested sys-include dirs install Alexey Lapshin
2023-08-09 20:03 ` [PATCH, RFC v3 2/3] newlib: add Xtensa port Alexey Lapshin
2023-08-09 20:04 ` [PATCH, RFC v3 3/3] libgloss: " Alexey Lapshin
2023-08-10 18:20 ` [PATCH, RFC v3 0/3] add xtensa port Jeff Johnston
2023-08-10 19:50 ` Alexey Lapshin
2023-08-10 22:12 ` Jeff Johnston
2023-08-10 22:15 ` Alexey Lapshin
2023-08-10 22:18 ` Jeff Johnston
2023-08-15 7:20 ` Alexey Lapshin
2023-08-15 14:48 ` Jeff Johnston
2023-08-15 15:07 ` Alexey Lapshin
2023-08-15 17:53 ` Jeff Johnston
2023-08-15 19:20 ` Alexey Lapshin
2023-08-15 22:09 ` Jeff Johnston
2023-08-16 7:46 ` Alexey Lapshin
2023-08-16 18:55 ` Jeff Johnston
2023-08-17 20:38 ` Alexey Lapshin
2023-08-17 22:25 ` Jeff Johnston
2023-08-18 10:13 ` Alexey Lapshin
2023-08-23 20:57 ` Jeff Johnston
2023-08-23 21:28 ` Alexey Lapshin
2023-08-24 15:01 ` Jeff Johnston
2023-08-24 15:45 ` Alexey Lapshin
2023-09-11 12:07 ` [PATCH, RFC 0/8] " Sebastian Huber
2023-09-11 12:15 ` Alexey Lapshin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=98f6055603d59cb6cd194d668e2b914e559a94bd.camel@espressif.com \
--to=alexey.lapshin@espressif.com \
--cc=alexey.gerenkov@espressif.com \
--cc=ivan@espressif.com \
--cc=jcmvbkbc@gmail.com \
--cc=newlib@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).