From: Jan Beulich <jbeulich@suse.com>
To: Binutils <binutils@sourceware.org>
Cc: "H.J. Lu" <hjl.tools@gmail.com>
Subject: [PATCH v3 6/7] x86-64: allow HLE store of accumulator to absolute 32-bit address
Date: Wed, 5 Oct 2022 09:25:25 +0200 [thread overview]
Message-ID: <e4692495-7d3d-074d-14f9-364d4a9a998c@suse.com> (raw)
In-Reply-To: <20e2773a-2e47-869b-1900-709f8ad4cd6b@suse.com>
In commit 1212781b35c9 ("ix86: allow HLE store of accumulator to
absolute address") I was wrong to exclude 64-bit code. Dropping the
check also leads to better diagnostics in 64-bit code ("MOV", after
all, isn't invalid with "XRELEASE").
While there also limit the amount of further checks done: The operand
type checks that were there were effectively redundant with other ones
anyway, plus it's quite fine to also have "xrelease mov <disp>, %eax"
look for the next MOV template (in fact again also improving
diagnostics).
---
v2: New.
--- a/gas/config/tc-i386.c
+++ b/gas/config/tc-i386.c
@@ -6819,12 +6819,9 @@ match_template (char mnem_suffix)
continue;
/* xrelease mov %eax, <disp> is another special case. It must not
match the accumulator-only encoding of mov. */
- if (flag_code != CODE_64BIT
- && i.hle_prefix
+ if (i.hle_prefix
&& t->base_opcode == 0xa0
- && t->opcode_modifier.opcodespace == SPACE_BASE
- && i.types[0].bitfield.instance == Accum
- && (i.flags[1] & Operand_Mem))
+ && t->opcode_modifier.opcodespace == SPACE_BASE)
continue;
/* Fall through. */
--- a/gas/testsuite/gas/i386/x86-64-hle-intel.d
+++ b/gas/testsuite/gas/i386/x86-64-hle-intel.d
@@ -425,6 +425,8 @@ Disassembly of section .text:
[ ]*[a-f0-9]+: f0 f2 20 01 lock xacquire and BYTE PTR \[rcx\],al
[ ]*[a-f0-9]+: f0 f3 20 01 lock xrelease and BYTE PTR \[rcx\],al
[ ]*[a-f0-9]+: f3 88 01 xrelease mov BYTE PTR \[rcx\],al
+[ ]*[a-f0-9]+: f3 88 04 25 78 56 34 12 xrelease mov BYTE PTR (ds:)?0x12345678,al
+[ ]*[a-f0-9]+: 67 f3 88 04 25 21 43 65 87 xrelease mov BYTE PTR \[eiz\*1\+0x87654321\],al
[ ]*[a-f0-9]+: f2 f0 08 01 xacquire lock or BYTE PTR \[rcx\],al
[ ]*[a-f0-9]+: f2 f0 08 01 xacquire lock or BYTE PTR \[rcx\],al
[ ]*[a-f0-9]+: f3 f0 08 01 xrelease lock or BYTE PTR \[rcx\],al
@@ -476,6 +478,8 @@ Disassembly of section .text:
[ ]*[a-f0-9]+: f0 f2 66 21 01 lock xacquire and WORD PTR \[rcx\],ax
[ ]*[a-f0-9]+: f0 f3 66 21 01 lock xrelease and WORD PTR \[rcx\],ax
[ ]*[a-f0-9]+: 66 f3 89 01 xrelease mov WORD PTR \[rcx\],ax
+[ ]*[a-f0-9]+: 66 f3 89 04 25 78 56 34 12 xrelease mov WORD PTR (ds:)?0x12345678,ax
+[ ]*[a-f0-9]+: 67 66 f3 89 04 25 21 43 65 87 xrelease mov WORD PTR \[eiz\*1\+0x87654321\],ax
[ ]*[a-f0-9]+: 66 f2 f0 09 01 xacquire lock or WORD PTR \[rcx\],ax
[ ]*[a-f0-9]+: 66 f2 f0 09 01 xacquire lock or WORD PTR \[rcx\],ax
[ ]*[a-f0-9]+: 66 f3 f0 09 01 xrelease lock or WORD PTR \[rcx\],ax
@@ -527,6 +531,8 @@ Disassembly of section .text:
[ ]*[a-f0-9]+: f0 f2 21 01 lock xacquire and DWORD PTR \[rcx\],eax
[ ]*[a-f0-9]+: f0 f3 21 01 lock xrelease and DWORD PTR \[rcx\],eax
[ ]*[a-f0-9]+: f3 89 01 xrelease mov DWORD PTR \[rcx\],eax
+[ ]*[a-f0-9]+: f3 89 04 25 78 56 34 12 xrelease mov DWORD PTR (ds:)?0x12345678,eax
+[ ]*[a-f0-9]+: 67 f3 89 04 25 21 43 65 87 xrelease mov DWORD PTR \[eiz\*1\+0x87654321\],eax
[ ]*[a-f0-9]+: f2 f0 09 01 xacquire lock or DWORD PTR \[rcx\],eax
[ ]*[a-f0-9]+: f2 f0 09 01 xacquire lock or DWORD PTR \[rcx\],eax
[ ]*[a-f0-9]+: f3 f0 09 01 xrelease lock or DWORD PTR \[rcx\],eax
@@ -578,6 +584,8 @@ Disassembly of section .text:
[ ]*[a-f0-9]+: f0 f2 48 21 01 lock xacquire and QWORD PTR \[rcx\],rax
[ ]*[a-f0-9]+: f0 f3 48 21 01 lock xrelease and QWORD PTR \[rcx\],rax
[ ]*[a-f0-9]+: f3 48 89 01 xrelease mov QWORD PTR \[rcx\],rax
+[ ]*[a-f0-9]+: f3 48 89 04 25 78 56 34 12 xrelease mov QWORD PTR (ds:)?0x12345678,rax
+[ ]*[a-f0-9]+: 67 f3 48 89 04 25 21 43 65 87 xrelease mov QWORD PTR \[eiz\*1\+0x87654321\],rax
[ ]*[a-f0-9]+: f2 f0 48 09 01 xacquire lock or QWORD PTR \[rcx\],rax
[ ]*[a-f0-9]+: f2 f0 48 09 01 xacquire lock or QWORD PTR \[rcx\],rax
[ ]*[a-f0-9]+: f3 f0 48 09 01 xrelease lock or QWORD PTR \[rcx\],rax
--- a/gas/testsuite/gas/i386/x86-64-hle.d
+++ b/gas/testsuite/gas/i386/x86-64-hle.d
@@ -424,6 +424,8 @@ Disassembly of section .text:
[ ]*[a-f0-9]+: f0 f2 20 01 lock xacquire and %al,\(%rcx\)
[ ]*[a-f0-9]+: f0 f3 20 01 lock xrelease and %al,\(%rcx\)
[ ]*[a-f0-9]+: f3 88 01 xrelease mov %al,\(%rcx\)
+[ ]*[a-f0-9]+: f3 88 04 25 78 56 34 12 xrelease mov %al,0x12345678
+[ ]*[a-f0-9]+: 67 f3 88 04 25 21 43 65 87 xrelease mov %al,0x87654321\(,%eiz,1\)
[ ]*[a-f0-9]+: f2 f0 08 01 xacquire lock or %al,\(%rcx\)
[ ]*[a-f0-9]+: f2 f0 08 01 xacquire lock or %al,\(%rcx\)
[ ]*[a-f0-9]+: f3 f0 08 01 xrelease lock or %al,\(%rcx\)
@@ -475,6 +477,8 @@ Disassembly of section .text:
[ ]*[a-f0-9]+: f0 f2 66 21 01 lock xacquire and %ax,\(%rcx\)
[ ]*[a-f0-9]+: f0 f3 66 21 01 lock xrelease and %ax,\(%rcx\)
[ ]*[a-f0-9]+: 66 f3 89 01 xrelease mov %ax,\(%rcx\)
+[ ]*[a-f0-9]+: 66 f3 89 04 25 78 56 34 12 xrelease mov %ax,0x12345678
+[ ]*[a-f0-9]+: 67 66 f3 89 04 25 21 43 65 87 xrelease mov %ax,0x87654321\(,%eiz,1\)
[ ]*[a-f0-9]+: 66 f2 f0 09 01 xacquire lock or %ax,\(%rcx\)
[ ]*[a-f0-9]+: 66 f2 f0 09 01 xacquire lock or %ax,\(%rcx\)
[ ]*[a-f0-9]+: 66 f3 f0 09 01 xrelease lock or %ax,\(%rcx\)
@@ -526,6 +530,8 @@ Disassembly of section .text:
[ ]*[a-f0-9]+: f0 f2 21 01 lock xacquire and %eax,\(%rcx\)
[ ]*[a-f0-9]+: f0 f3 21 01 lock xrelease and %eax,\(%rcx\)
[ ]*[a-f0-9]+: f3 89 01 xrelease mov %eax,\(%rcx\)
+[ ]*[a-f0-9]+: f3 89 04 25 78 56 34 12 xrelease mov %eax,0x12345678
+[ ]*[a-f0-9]+: 67 f3 89 04 25 21 43 65 87 xrelease mov %eax,0x87654321\(,%eiz,1\)
[ ]*[a-f0-9]+: f2 f0 09 01 xacquire lock or %eax,\(%rcx\)
[ ]*[a-f0-9]+: f2 f0 09 01 xacquire lock or %eax,\(%rcx\)
[ ]*[a-f0-9]+: f3 f0 09 01 xrelease lock or %eax,\(%rcx\)
@@ -577,6 +583,8 @@ Disassembly of section .text:
[ ]*[a-f0-9]+: f0 f2 48 21 01 lock xacquire and %rax,\(%rcx\)
[ ]*[a-f0-9]+: f0 f3 48 21 01 lock xrelease and %rax,\(%rcx\)
[ ]*[a-f0-9]+: f3 48 89 01 xrelease mov %rax,\(%rcx\)
+[ ]*[a-f0-9]+: f3 48 89 04 25 78 56 34 12 xrelease mov %rax,0x12345678
+[ ]*[a-f0-9]+: 67 f3 48 89 04 25 21 43 65 87 xrelease mov %rax,0x87654321\(,%eiz,1\)
[ ]*[a-f0-9]+: f2 f0 48 09 01 xacquire lock or %rax,\(%rcx\)
[ ]*[a-f0-9]+: f2 f0 48 09 01 xacquire lock or %rax,\(%rcx\)
[ ]*[a-f0-9]+: f3 f0 48 09 01 xrelease lock or %rax,\(%rcx\)
--- a/gas/testsuite/gas/i386/x86-64-hle.s
+++ b/gas/testsuite/gas/i386/x86-64-hle.s
@@ -442,6 +442,8 @@ _start:
.byte 0xf0; .byte 0xf2; andb %al,(%rcx)
.byte 0xf0; .byte 0xf3; andb %al,(%rcx)
xrelease movb %al,(%rcx)
+ xrelease movb %al,0x12345678
+ xrelease addr32 movb %al,0x87654321
xacquire lock orb %al,(%rcx)
lock xacquire orb %al,(%rcx)
xrelease lock orb %al,(%rcx)
@@ -496,6 +498,8 @@ _start:
.byte 0xf0; .byte 0xf2; andw %ax,(%rcx)
.byte 0xf0; .byte 0xf3; andw %ax,(%rcx)
xrelease movw %ax,(%rcx)
+ xrelease movw %ax,0x12345678
+ xrelease addr32 movw %ax,0x87654321
xacquire lock orw %ax,(%rcx)
lock xacquire orw %ax,(%rcx)
xrelease lock orw %ax,(%rcx)
@@ -550,6 +554,8 @@ _start:
.byte 0xf0; .byte 0xf2; andl %eax,(%rcx)
.byte 0xf0; .byte 0xf3; andl %eax,(%rcx)
xrelease movl %eax,(%rcx)
+ xrelease movl %eax,0x12345678
+ xrelease addr32 movl %eax,0x87654321
xacquire lock orl %eax,(%rcx)
lock xacquire orl %eax,(%rcx)
xrelease lock orl %eax,(%rcx)
@@ -604,6 +610,8 @@ _start:
.byte 0xf0; .byte 0xf2; andq %rax,(%rcx)
.byte 0xf0; .byte 0xf3; andq %rax,(%rcx)
xrelease movq %rax,(%rcx)
+ xrelease movq %rax,0x12345678
+ xrelease addr32 movq %rax,0x87654321
xacquire lock orq %rax,(%rcx)
lock xacquire orq %rax,(%rcx)
xrelease lock orq %rax,(%rcx)
next prev parent reply other threads:[~2022-10-05 7:25 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-05 7:19 [PATCH v3 0/7] x86: suffix handling changes Jan Beulich
2022-10-05 7:20 ` [PATCH v3 1/7] x86: constify parse_insn()'s input Jan Beulich
2022-10-05 7:22 ` [PATCH v3 2/7] x86: introduce Pass2 insn attribute Jan Beulich
2022-10-05 7:23 ` [PATCH v3 3/7] x86: re-work insn/suffix recognition Jan Beulich
2022-10-05 23:52 ` H.J. Lu
2022-10-06 6:15 ` Jan Beulich
2022-10-06 6:58 ` Jan Beulich
2022-10-06 15:28 ` H.J. Lu
2022-10-06 16:12 ` Jan Beulich
2022-10-06 18:41 ` H.J. Lu
2022-10-07 13:03 ` Jan Beulich
2022-10-05 7:24 ` [PATCH v3 4/7] x86-64: further re-work insn/suffix recognition to also cover MOVSL Jan Beulich
2022-10-11 17:44 ` H.J. Lu
2022-10-12 7:08 ` Jan Beulich
2022-10-12 17:10 ` H.J. Lu
2022-10-13 6:08 ` Jan Beulich
2022-10-13 17:00 ` H.J. Lu
2022-10-14 7:03 ` Jan Beulich
2022-10-14 17:07 ` H.J. Lu
2022-10-17 7:02 ` Jan Beulich
2022-10-17 22:36 ` H.J. Lu
2022-10-18 6:31 ` Jan Beulich
2022-10-18 21:48 ` H.J. Lu
2022-10-19 6:08 ` Jan Beulich
2022-10-19 21:46 ` H.J. Lu
2022-10-20 10:12 ` Jan Beulich
2022-10-05 7:24 ` [PATCH v3 5/7] ix86: don't recognize/derive Q suffix in the common case Jan Beulich
2022-10-11 17:49 ` H.J. Lu
2022-10-05 7:25 ` Jan Beulich [this message]
2022-10-11 17:50 ` [PATCH v3 6/7] x86-64: allow HLE store of accumulator to absolute 32-bit address H.J. Lu
2022-10-05 7:25 ` [PATCH v3 7/7] x86: move bad-use-of-TLS-reloc check Jan Beulich
2022-10-11 17:57 ` H.J. Lu
2022-10-12 7:13 ` Jan Beulich
2022-10-12 17:02 ` H.J. Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e4692495-7d3d-074d-14f9-364d4a9a998c@suse.com \
--to=jbeulich@suse.com \
--cc=binutils@sourceware.org \
--cc=hjl.tools@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).