* Re: vim/cygwin: python support [not found] <1198556727-1341091933-cardhu_decombobulator_blackberry.rim.net-741837253-@b12.c30.bise6.blackberry> @ 2012-06-30 22:04 ` Tony Mechelynck 2012-07-01 5:11 ` ping 0 siblings, 1 reply; 8+ messages in thread From: Tony Mechelynck @ 2012-06-30 22:04 UTC (permalink / raw) To: songpingemail; +Cc: vim_use, cygwin, Vlad Irnov On 30/06/12 23:32, ping wrote: > Thanks > I just got it recompiled under cygwin with python support > At least Voom that is based on python runs smoothly now > I can post detailed steps if anyone is interested [...] Maybe you should create a tip at http://vim.wikia.com/ ? Best regards, Tony. -- There is a Massachusetts law requiring all dogs to have their hind legs tied during the month of April. -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: vim/cygwin: python support 2012-06-30 22:04 ` vim/cygwin: python support Tony Mechelynck @ 2012-07-01 5:11 ` ping 2012-07-01 23:20 ` Andrey Repin 0 siblings, 1 reply; 8+ messages in thread From: ping @ 2012-07-01 5:11 UTC (permalink / raw) To: Tony Mechelynck; +Cc: vim_use, cygwin, Vlad Irnov On 6/30/2012 6:04 PM, Tony Mechelynck wrote: > On 30/06/12 23:32, ping wrote: >> Thanks >> I just got it recompiled under cygwin with python support >> At least Voom that is based on python runs smoothly now >> I can post detailed steps if anyone is interested > [...] > > Maybe you should create a tip at http://vim.wikia.com/ ? > > > Best regards, > Tony. sure I'll seriously do it later.. but currently, I'm still testing it -- trying to move all my linux-based works (whole .vim including all plugins!) on this new build. so Voom (python based) works perfect: [1] bash.exe - 1 [2] tech-tips2.txt_VOOM2 close 2 161 . . |c-s mod> 4570 === arp 2 162 . . |smc 4571 2 163 . . |swap 4572 ==== ##arp 2+ 164 . . |coredump 4573 in.arpd 2+ 166 . . |NFS /1 4574 /etc/inet/hosts <- /etc/hosts 2+ 181 . . |autoFS 4575 2+ 188 . . |RAID & v 4576 /etc/ethers 2+ 192 . . |config v 4577 2+ 196 . . |name ser 4578 arp -a - 198 . |book3 4579 -s 2 199 . . |etherne> 4580 -d - 200 = . . |arp 4581 3 201 . . . |##arp 4582 3 202 . . . |##rarp 4583 ==== ##rarp and ... I do find some minor (maybe not that minor) issue in here, e.g: 1)sometime (not everytime, roughly half chances) follow warning/errors prompt, press <enter> it will go away and laugh vim. [ping@ping-new-laptop ~]$ vim 1 [main] vim 6740 child_info_fork::abort: address space needed by 'fcntl.dll' (0x320000) is already occupied Cannot fork Press ENTER or type command to continue 2) if 1) happened, then ConqueTerm plugin crash vim; otherwise it works fine. #when it crashes: ~ ~ ~ :ConqueTerm bash.exe Error detected while processing function 231..conque_term#set_mappings: line 150: E31: No such mapping Vim: Caught deadly signal HUPo continue Vim: Finished. Hangup #when it works (inside vim buffer): [ping@ping-new-laptop ~]$ [ping@ping-new-laptop ~]$ ls c doc Dropbox fuf living files n vim win-home win-programfile [ping@ping-new-laptop ~]$ ~ ~ ~ -- INSERT -- 20,27 All overall I feel there is still some hopes that it can be a production tool... regards ping -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: vim/cygwin: python support 2012-07-01 5:11 ` ping @ 2012-07-01 23:20 ` Andrey Repin 0 siblings, 0 replies; 8+ messages in thread From: Andrey Repin @ 2012-07-01 23:20 UTC (permalink / raw) To: ping, cygwin Greetings, ping! > and ... I do find some minor (maybe not that minor) issue in here, e.g: > 1)sometime (not everytime, roughly half chances) follow warning/errors > prompt, press <enter> it will go away and laugh vim. > [ping@ping-new-laptop ~]$ vim > 1 [main] vim 6740 child_info_fork::abort: address space needed by > 'fcntl.dll' (0x320000) is already occupied > Cannot fork > Press ENTER or type command to continue Sounds like you need to rebase some DLL's. > 2) if 1) happened, then ConqueTerm plugin crash vim; otherwise it works > fine. > #when it crashes: > ~ > ~ > ~ > :ConqueTerm bash.exe > Error detected while processing function 231..conque_term#set_mappings: > line 150: > E31: No such mapping > Vim: Caught deadly signal HUPo continue > Vim: Finished. > Hangup > #when it works (inside vim buffer): > [ping@ping-new-laptop ~]$ > [ping@ping-new-laptop ~]$ ls > c doc Dropbox fuf living files n vim win-home win-programfile > [ping@ping-new-laptop ~]$ > ~ > ~ > ~ > -- INSERT -- 20,27 > All > overall I feel there is still some hopes that it can be a production tool... -- WBR, Andrey Repin (anrdaemon@freemail.ru) 02.07.2012, <03:04> Sorry for my terrible english... -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <4FEDBA31.4060104@gmail.com>]
* Re: vim/cygwin: python support [not found] <4FEDBA31.4060104@gmail.com> @ 2012-06-29 14:26 ` ping 2012-06-29 15:06 ` Ryan Johnson 2012-06-30 13:09 ` Tony Mechelynck 1 sibling, 1 reply; 8+ messages in thread From: ping @ 2012-06-29 14:26 UTC (permalink / raw) To: vim-use Mailingliste, cygwin; +Cc: Vlad Irnov got returned msg about cygwin. so resent.. On 06/29/2012 10:22 AM, ping wrote: > not sure this should go to vim/cygwin team...so copy both and Vlad(Voom > plugin author) > I got a new laptop (folio) come with win7. > for some reason I want to give win7 a trial. > > cygwin full install went smooth. > but looks I don't have python support here. > that means I won't be able to have some plugins (like Voom) that is > based on python. > I did a lot of search and looks this is a common issue, but still I > don't see a clear answer yet. > any cygwin users can advise? > > regards > ping > -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: vim/cygwin: python support 2012-06-29 14:26 ` ping @ 2012-06-29 15:06 ` Ryan Johnson 2012-06-29 15:43 ` ping 0 siblings, 1 reply; 8+ messages in thread From: Ryan Johnson @ 2012-06-29 15:06 UTC (permalink / raw) To: cygwin On 06/29/2012 10:22 AM, ping wrote: >> cygwin full install went smooth. >> but looks I don't have python support here. http://cygwin.com/problems.html You might also try installing the python package... Ryan -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: vim/cygwin: python support 2012-06-29 15:06 ` Ryan Johnson @ 2012-06-29 15:43 ` ping 2012-06-29 20:50 ` ping 0 siblings, 1 reply; 8+ messages in thread From: ping @ 2012-06-29 15:43 UTC (permalink / raw) To: cygwin thanks Ryan. I think I had the python package already -- I installed the FULL cygwin.. ping@ping-new-laptop ~ $ python Python 2.6.8 (unknown, Jun 9 2012, 11:30:32) [GCC 4.5.3] on cygwin Type "help", "copyright", "credits" or "license" for more information. >>> I guess I need to do some manual re-compiling work myself. but depending on whether I'm lucky not sure I'll make it or mess things up worse. not complaint at all...cygwin is an amazing project already...just wondering why there isn't a "full-feature" ready to use vim available so newbies like me won't need to do the dev-level work. I remember I use cygwin years ago and ran into the same trouble... I'll try and post update. regards ping On 06/29/2012 11:06 AM, Ryan Johnson wrote: > On 06/29/2012 10:22 AM, ping wrote: >>> cygwin full install went smooth. >>> but looks I don't have python support here. > http://cygwin.com/problems.html > > You might also try installing the python package... > > Ryan > > > > -- > Problem reports: http://cygwin.com/problems.html > FAQ: http://cygwin.com/faq/ > Documentation: http://cygwin.com/docs.html > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: vim/cygwin: python support 2012-06-29 15:43 ` ping @ 2012-06-29 20:50 ` ping 0 siblings, 0 replies; 8+ messages in thread From: ping @ 2012-06-29 20:50 UTC (permalink / raw) To: cygwin I just got it re-compired from the source with python enabled, and it looks now have the python support. :version VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Jun 29 2012 16:20:28) Included patches: 1-581 Compiled by ping@ping-new-laptop Huge version without GUI. Features included (+) or not (-): +arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent -clientserver -clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +fork() +gettext -hangul_input +iconv +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape +mouse_dec -mouse_gpm -mouse_jsbterm +mouse_netterm -mouse_sysmouse +mouse_xterm +mouse_urxvt +multi_byte +multi_lang -mzscheme +netbeans_intg +path_extra -perl +persistent_undo +postscript +printer +profile +python -python3 +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title -toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp -xterm_clipboard -xterm_save system vimrc file: "$VIM/vimrc" user vimrc file: "$HOME/.vimrc" user exrc file: "$HOME/.exrc" fall-back for $VIM: "/usr/local/share/vim" Compilation: gcc -c -I. -Iproto -DHAVE_CONFIG_H -g -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1 Linking: gcc -L/usr/local/lib -Wl,--as-needed -o vim.exe -lm -lncurses -lelf -liconv -lintl -L/usr/lib/python2.6/config -lpython2.6 -ldl I have not move my work on it so not sure what other issues I might run into here. At least the python feature is there! thanks. regards ping On 06/29/2012 11:43 AM, ping wrote: > thanks Ryan. > > I think I had the python package already -- I installed the FULL cygwin.. > > ping@ping-new-laptop ~ > $ python > Python 2.6.8 (unknown, Jun 9 2012, 11:30:32) > [GCC 4.5.3] on cygwin > Type "help", "copyright", "credits" or "license" for more information. > >>> > > I guess I need to do some manual re-compiling work myself. > but depending on whether I'm lucky not sure I'll make it or mess things > up worse. > not complaint at all...cygwin is an amazing project already...just > wondering why there isn't a "full-feature" ready to use vim available so > newbies like me won't need to do the dev-level work. > I remember I use cygwin years ago and ran into the same trouble... > > I'll try and post update. > > regards > ping > > > > > On 06/29/2012 11:06 AM, Ryan Johnson wrote: >> On 06/29/2012 10:22 AM, ping wrote: >>>> cygwin full install went smooth. >>>> but looks I don't have python support here. >> http://cygwin.com/problems.html >> >> You might also try installing the python package... >> >> Ryan >> >> >> >> -- >> Problem reports: http://cygwin.com/problems.html >> FAQ: http://cygwin.com/faq/ >> Documentation: http://cygwin.com/docs.html >> Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple >> > -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: vim/cygwin: python support [not found] <4FEDBA31.4060104@gmail.com> 2012-06-29 14:26 ` ping @ 2012-06-30 13:09 ` Tony Mechelynck 1 sibling, 0 replies; 8+ messages in thread From: Tony Mechelynck @ 2012-06-30 13:09 UTC (permalink / raw) To: vim_use; +Cc: ping, cygwin, Vlad Irnov On 29/06/12 16:22, ping wrote: > not sure this should go to vim/cygwin team...so copy both and Vlad(Voom > plugin author) > I got a new laptop (folio) come with win7. > for some reason I want to give win7 a trial. > > cygwin full install went smooth. > but looks I don't have python support here. > that means I won't be able to have some plugins (like Voom) that is > based on python. > I did a lot of search and looks this is a common issue, but still I > don't see a clear answer yet. > any cygwin users can advise? > > regards > ping When I was still on Windows, I used to have some Cygwin packages installed, but the Python I used (and compiled Vim with, using the make_cyg.mak and the Cygwin/MinGW gcc) was not from Cygwin but from python.org itself. See http://users.skynet.be/antoine.mechelynck/vim/compile.htm for details. The vim.exe and gvim.exe which I made that way were _built_ under Cygwin but not for _use_ under Cygwin — they were for use under Windows from a desktop icon or a cmd.exe prompt, and did not use the cygwin1.dll library. Also, Win64 was still a thing of the future at the time. DISCLAIMER: The HowTo page mentioned two paragraphs above is about 1½ years old, and since I have left Windows forever I cannot check if it is still accurate. However, even if it isn't, a "clever user" ought to be able to fill in the gaps. Best regards, Tony. -- Ask not for whom the <CONTROL-G> tolls. -- Problem reports: http://cygwin.com/problems.html FAQ: http://cygwin.com/faq/ Documentation: http://cygwin.com/docs.html Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-07-01 23:20 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <1198556727-1341091933-cardhu_decombobulator_blackberry.rim.net-741837253-@b12.c30.bise6.blackberry> 2012-06-30 22:04 ` vim/cygwin: python support Tony Mechelynck 2012-07-01 5:11 ` ping 2012-07-01 23:20 ` Andrey Repin [not found] <4FEDBA31.4060104@gmail.com> 2012-06-29 14:26 ` ping 2012-06-29 15:06 ` Ryan Johnson 2012-06-29 15:43 ` ping 2012-06-29 20:50 ` ping 2012-06-30 13:09 ` Tony Mechelynck
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).