From: Mark Wielaard <mark@klomp.org>
To: Denys Vlasenko <dvlasenk@redhat.com>
Cc: debugedit@sourceware.org
Subject: Re: [PATCH] find-debuginfo: unless -q -q, print messages what big steps we are at
Date: Fri, 30 Jun 2023 15:25:19 +0200 [thread overview]
Message-ID: <025ec8a4f5e26a4f0f40b90776c9033b45299396.camel@klomp.org> (raw)
In-Reply-To: <20230629141349.GA13707@gnu.wildebeest.org>
[-- Attachment #1: Type: text/plain, Size: 1056 bytes --]
Hi Denys,
On Thu, 2023-06-29 at 16:13 +0200, Mark Wielaard wrote:
> > We can give a few messages explaining what general steps we go through:
> >
> > Extracting debug info from N files
> > DWARF-compressing N files
> > Creating .debug symlinks for symlinks to ELF files
> > Copying sources found by 'debugedit -l'
> >
> > This is also useful to get a feeling which steps are time consuming.
> > Kernel builds often need to investigate this aspect. To help a bit more,
> > add "find-debuginfo: starting" and "find-debuginfo: done" messages too.
> >
> > This patch adds these messages.
> >
> > Two -q -q options suppress these messages too.
>
> I like this idea, but I am wondering if instead of -q -q we should
> have a -v,--verbose flag for the very verbose output. Then this
> explanary output could be the default. And -q,--quiet would suppress
> even those message.
So this is what I was thinking. What do you think?
https://code.wildebeest.org/git/user/mjw/debugedit/commit/?h=verbose
Thanks,
Mark
[-- Attachment #2: Type: text/x-patch, Size: 7627 bytes --]
From 2eecc4ef19e0a31c56fc9912d8e7a9cb325db33b Mon Sep 17 00:00:00 2001
From: Denys Vlasenko <dvlasenk@redhat.com>
Date: Thu, 22 Jun 2023 15:31:03 +0200
Subject: [PATCH] find-debuginfo: Add -v,--verbose for per file messages
Only print messages what big steps we are at without --verbose.
For a reader of rpmbuild's log, it's rather unclear what find-debuginfo
is doing. It used to be too verbose, "extracting debug info from FILE"
for every file, and while this can be suppressed now, we still end up
with something semi-mysterious like this:
...
extracting debug info from /builddir/build/BUILDROOT/xyz
gdb-add-index: No index was created for /builddir/build/BUILDROOT/xyz
gdb-add-index: [Was there no debuginfo? Was there already an index?]
symlinked /usr/lib/debug/usr/lib64/libcpupower.so.0.0.1.debug to /usr/lib/debug/usr/lib64/libcpupower.so.debug
symlinked /usr/lib/debug/usr/lib64/libcpupower.so.0.0.1.debug to /usr/lib/debug/usr/lib64/libcpupower.so.0.debug
cpio: binutils-2.30/bfd: Cannot stat: No such file or directory
cpio: binutils-2.30/bfd/aout-target.h: Cannot stat: No such file or directory
cpio: binutils-2.30/bfd/aoutx.h: Cannot stat: No such file or directory
cpio: binutils-2.30/bfd/archive.c: Cannot stat: No such file or directory
cpio: binutils-2.30/bfd/archive64.c: Cannot stat: No such file or directory
...
775655 blocks
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
...
The reader is left confused. "What these cpio errors are about?
Why those sources are not found?" (Well, because not every source
name extracted by 'debugedit -l' has to exist, but this requires
considerable digging aroung to understand).
We can give a few messages explaining what general steps we go through:
Extracting debug info from N files
DWARF-compressing N files
Creating .debug symlinks for symlinks to ELF files
Copying sources found by 'debugedit -l'
This is also useful to get a feeling which steps are time consuming.
Kernel builds often need to investigate this aspect. To help a bit more,
add "find-debuginfo: starting" and "find-debuginfo: done" messages too.
This patch adds these messages.
The -q options suppress these messages too.
It also adds a --verbose flag to print per file messages.
Those per file messages are now suppressed by default and
only the general step messages are show. Unless -q is given,
which suppresses all non-error output.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Mark Wielaard <mark@klomp.org>
---
scripts/find-debuginfo.in | 36 +++++++++++++++++++++++++++---------
1 file changed, 27 insertions(+), 9 deletions(-)
diff --git a/scripts/find-debuginfo.in b/scripts/find-debuginfo.in
index e7ac095..9cfb701 100755
--- a/scripts/find-debuginfo.in
+++ b/scripts/find-debuginfo.in
@@ -26,7 +26,7 @@ Usage: find-debuginfo [OPTION]... [builddir]
automagically generates debug info and file lists
Options:
-[--strict-build-id] [-g] [-r] [-m] [-i] [-n] [-q]
+[--strict-build-id] [-g] [-r] [-m] [-i] [-n] [-q] [-v]
[--keep-section SECTION] [--remove-section SECTION]
[--g-libs]
[-j N] [--jobs N]
@@ -94,7 +94,9 @@ will be called /usr/debug/src/<BASE>. This makes sure the debug source
dirs are unique between package version, release and achitecture (Use
--unique-debug-src-base "%{name}-%{VERSION}-%{RELEASE}.%{_arch}")
-The -q or --quiet flag silences non-error output from the script.
+The -q or --quiet flag silences all non-error output from the script.
+The -v or --verbose flag add more output for all files processed.
+When neither -q or -v is given then only output for each pass is given.
All file names in switches are relative to builddir ('.' if not given).
EOF
@@ -148,9 +150,12 @@ n_jobs=1
# exit early on --version or --help
done=false
-# silence non-error output
+# silence all output
quiet=false
+# add more non-error output
+verbose=false
+
BUILDDIR=.
out=debugfiles.list
srcout=
@@ -246,6 +251,11 @@ while [ $# -gt 0 ]; do
;;
-q|--quiet)
quiet=true
+ verbose=false
+ ;;
+ -v|--verbose)
+ quiet=false
+ verbose=true
;;
--version)
echo "find-debuginfo @VERSION@"
@@ -289,6 +299,8 @@ if [ "$strip_g" = "true" ] && [ "$strip_glibs" = "true" ]; then
exit 2
fi
+$quiet || echo "find-debuginfo: starting" 2>&1
+
i=0
while ((i < nout)); do
outs[$i]="$BUILDDIR/${outs[$i]}"
@@ -445,7 +457,7 @@ do_file()
get_debugfn "$f"
[ -f "${debugfn}" ] && return
- $quiet || echo "extracting debug info from $f"
+ $verbose && echo "extracting debug info from $f"
# See also cpio SOURCEFILE copy. Directories must match up.
debug_base_name="$RPM_BUILD_DIR"
debug_dest_name="/usr/src/debug"
@@ -521,7 +533,7 @@ do_file()
grep "^$inum " "$temp/linked" | while read inum linked; do
link=$debugfn
get_debugfn "$linked"
- $quiet || echo "hard linked $link to $debugfn"
+ $verbose && echo "hard linked $link to $debugfn"
mkdir -p "$(dirname "$debugfn")" && ln -nf "$link" "$debugfn"
done
fi
@@ -549,6 +561,7 @@ run_job()
}
n_files=$(wc -l <"$temp/primary")
+$quiet || echo "Extracting debug info from $n_files files" 2>&1
if [ $n_jobs -gt $n_files ]; then
n_jobs=$n_files
fi
@@ -587,7 +600,8 @@ if $run_dwz \
&& [ -d "${RPM_BUILD_ROOT}/usr/lib/debug" ]; then
readarray dwz_files < <(cd "${RPM_BUILD_ROOT}/usr/lib/debug"; find -type f -name \*.debug | LC_ALL=C sort)
if [ ${#dwz_files[@]} -gt 0 ]; then
- $quiet || size_before=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1)
+ $quiet || echo "DWARF-compressing ${#dwz_files[@]} files" 2>&1
+ $verbose && size_before=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1)
dwz_multifile_name="${RPM_PACKAGE_NAME}-${RPM_PACKAGE_VERSION}-${RPM_PACKAGE_RELEASE}.${RPM_ARCH}"
dwz_multifile_suffix=
dwz_multifile_idx=0
@@ -611,8 +625,8 @@ if $run_dwz \
echo >&2 "*** ERROR: DWARF compression requested, but no dwz installed"
exit 2
fi
- $quiet || size_after=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1)
- $quiet || echo "original debug info size: ${size_before}kB, size after compression: ${size_after}kB"
+ $verbose && size_after=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1)
+ $verbose && echo "original debug info size: ${size_before}kB, size after compression: ${size_after}kB"
# Remove .dwz directory if empty
rmdir "${RPM_BUILD_ROOT}/usr/lib/debug/.dwz" 2>/dev/null
@@ -625,6 +639,7 @@ fi
# For each symlink whose target has a .debug file,
# make a .debug symlink to that file.
+$quiet || echo "Creating .debug symlinks for symlinks to ELF files" 2>&1
find "$RPM_BUILD_ROOT" ! -path "${debugdir}/*" -type l -print |
while read f
do
@@ -632,7 +647,7 @@ do
f=${f#$RPM_BUILD_ROOT}
t=${t#$RPM_BUILD_ROOT}
if [ -f "$debugdir$t" ]; then
- $quiet || echo "symlinked /usr/lib/debug$t to /usr/lib/debug${f}.debug"
+ $verbose && echo "symlinked /usr/lib/debug$t to /usr/lib/debug${f}.debug"
debug_link "/usr/lib/debug$t" "${f}.debug"
fi
done
@@ -646,6 +661,7 @@ if [ -s "$SOURCEFILE" ]; then
debug_dest_name="/usr/src/debug/${unique_debug_src_base}"
fi
+ $quiet || echo "Copying sources found by 'debugedit -l' to ${debug_dest_name}" 2>&1
mkdir -p "${RPM_BUILD_ROOT}${debug_dest_name}"
# Filter out anything compiler generated which isn't a source file.
# e.g. <internal>, <built-in>, <__thread_local_inner macros>.
@@ -761,3 +777,5 @@ if ((nout > 0)); then
cat "$LISTFILE" >> "${LISTFILE}.new"
mv "${LISTFILE}.new" "$LISTFILE"
fi
+
+$quiet || echo "find-debuginfo: done" 2>&1
--
2.40.1
next prev parent reply other threads:[~2023-06-30 13:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-22 13:31 Denys Vlasenko
2023-06-29 14:13 ` Mark Wielaard
2023-06-30 13:25 ` Mark Wielaard [this message]
2023-06-30 18:51 ` Denys Vlasenko
2023-06-30 22:17 ` Mark Wielaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=025ec8a4f5e26a4f0f40b90776c9033b45299396.camel@klomp.org \
--to=mark@klomp.org \
--cc=debugedit@sourceware.org \
--cc=dvlasenk@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).