[ECOS] Configtool

[ECOS] Configtool

[Chandra Sekhar, G]

Hi,

  I downloaded the Configtool version 2 (binary), for Linux, a week
ago.  I have some problem in opening documentation regarding the path of
it.  When I try to invoke the 'Help --> Configuration Tool Help', I see
a message box indicating an error.  The message indicates that the file
is not at expected loaction.  It is expecting the Configuration Tool
Help files at

 'ECOS_REPOSITORY/doc//opt/ecos/configtool/bin/configtool-2.03/manual/'

  I can read the documents by either copying the file to the above
location or manually opening them in a browser.  But how to integrate
them into the configtool?

regards,
chandra



-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

[ECOS] configtool

[Larry Phillips]

I just downloaded the current eCos, and am having the same problem with configtool that I see in a message dated 15 Sep. The 
error is that every package generates a "This package doesn't have any valid version subdirectories" error.

Andrew Lunn replied to that message, telling the OP to go to http://ecoscentric.com/devzone/configtool.shtml and grab the binary 
from there. Clicking on the link to get the binary results in a "Resource is no longer available!" page.

Can anyone point me to a copy of the configtool binary that will allow me to run it? It would be greatly appreciated.

Thanks,
  Larry
--
There are 10 kinds of people in this world,
Those who understand binary, and those who don't.

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] configtool

[Wang, Liu (Liu)]

When running "configtool" it shows warning like:
"Can not enumerate files in directory
'c:\cygwin\opt\ecos\gnutools'(error 3: the system cannot find the path
specified.)"
The path is already deleted and the repository has been changed to a new
location.
Where is this path specified in the "configtool" ?

Regards,

Liu Wang
Software/Firmware Engineer
10C-359B LVC
1110 American Pkwy, Allentown
PA 18109, USA
(610)712-3472(o)
liuwang@agere.com




--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] configtool

[Matt Sartori]

I have had a look in the archives for any mention of this problem but
have failed to find any reference to it. 
I am unable to run the configtool under cygwin.
If I start the configtool from my project directory I get a dialogue
saying:

"C:\cygwin\opt\ecos does not seem to be a source repository:
C:\cygwin\opt\ecos\ecc\ecos.db does not exist"

the ecc directory is a symbolic link (or shortcut if viewed from
windows). 
Clicking ok and browsing for the root of the eCos repository tree just
fails with the same message.

Creating an actual ecc directory in the eCos root directory causes the
configtool to briefly come up and scroll a load of
"This package does not have any valid subdirectories" messages in its
bottom console window and finally quit out.

I am using the new configtool 2.0 downloaded separately but still no
joy. 

Any ideas?

m@

--------------------------------------------------------------------------------


The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited.

If you received this in error, please contact the sender or postmaster (postmaster@hanoverdisplays.com) and delete the material from any computer.

Although we routinely screen for viruses, addressees should check this e-mail and any attachment for viruses. We make no warranty as to absence of viruses in this e-mail or any attachments.

Our Company's email policy is to permit incidental personal use. If this email is of a personal nature, it must not be relied upon as expressing the views or opinions of the company.

Visit out website at www.hanoverdisplays.com



--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Re: [ECOS] configtool

[Andrew Lunn]

> I am using the new configtool 2.0 downloaded separately but still no
> joy. 

Downloaded from where? 

http://ecoscentric.com/devzone/configtool.shtml

        Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] Fw: [ECOS] configtool

[David Lewin]

I know that so much,
 in fact I would like to know if someone knows
how to remedy about it ? 
I don't mean going into the sources, but if
anyone knows why it happens and if there
is a "trick" maybe.


----- Original Message ----- 
From: "Ashutosh" <ashutoshvyas@tataelxsi.co.in>
To: "'David Lewin'" <david.lewin@europe-technologies.com>
Sent: Friday, June 25, 2004 12:22 PM
Subject: RE: [ECOS] configtool


> yes this bug is still there.
> Regards,
> Ashutosh
> 
> -----Original Message-----
> From: ecos-discuss-owner@ecos.sourceware.org
> [mailto:ecos-discuss-owner@ecos.sourceware.org]On Behalf Of David Lewin
> Sent: Friday, June 25, 2004 3:46 PM
> To: > Subject: [ECOS] configtool
> 
> 
> Is there anybody that work on the windows version
> of Configtool ?
> 
> so many bugs (configtool disapear suddenly for ex. )
> are still remaining.
> 
> Thanx
> 
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] configtool

[David Lewin]

I've found the Stackdump file that is generated after
such a problem , made of  nothing, that is to say :

Stack trace:
Frame     Function  Args
End of stack trace

Anybody can help please ?


----- Original Message ----- 
From: "David Lewin" <david.lewin@europe-technologies.com>
To: <ecos-discuss@sources.redhat.com>
Sent: Friday, June 25, 2004 12:33 PM
Subject: [ECOS] Fw: [ECOS] configtool


> I know that so much,
>  in fact I would like to know if someone knows
> how to remedy about it ?
> I don't mean going into the sources, but if
> anyone knows why it happens and if there
> is a "trick" maybe.
>
>
> ----- Original Message ----- 
> From: "Ashutosh" <ashutoshvyas@tataelxsi.co.in>
> To: "'David Lewin'" <david.lewin@europe-technologies.com>
> Sent: Friday, June 25, 2004 12:22 PM
> Subject: RE: [ECOS] configtool
>
>
> > yes this bug is still there.
> > Regards,
> > Ashutosh
> >
> > -----Original Message-----
> > From: ecos-discuss-owner@ecos.sourceware.org
> > [mailto:ecos-discuss-owner@ecos.sourceware.org]On Behalf Of David Lewin
> > Sent: Friday, June 25, 2004 3:46 PM
> > To: > Subject: [ECOS] configtool
> >
> >
> > Is there anybody that work on the windows version
> > of Configtool ?
> >
> > so many bugs (configtool disapear suddenly for ex. )
> > are still remaining.
> >
> > Thanx
> >
> > --
> > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
> -- 
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] One question..

[anton yakovlev]

Hi, all!

I have a programm:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
#include <stdio.h>
#include <cyg/kernel/kapi.h>

void first(cyg_addrword_t threadData) {

    (void) threadData;
    printf("the first thread\n");

}

static char stack_a[4096];
static cyg_thread thread_a;
static cyg_handle_t handle_a;

void cyg_user_start(void) {
   
    cyg_thread_create(10, first, 0, "first", stack_a, 4096, &handle_a, 
&thread_a);
    cyg_thread_resume(handle_a);

}
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
but when i try to executing it, i see only following:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
RedBoot> load -r -m y -b 0x205000
Raw file loaded 0x00205000-0x00210500
xyzModem - CRC mode, 363(SOH)/0(STX)/0(CAN) packets, 3 retries
RedBoot> go 0x205000

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
i.e. thread want not to start.. Why so?..

I have Falcom fx35xxlsi (based on NEC V850 processors family) platform 
with eCos 2.0.. I build eCos from the sources.. Maybe I have broken 
configuration?..


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] configtool

[David Lewin]

Is there anybody that work on the windows version 
of Configtool ? 

so many bugs (configtool disapear suddenly for ex. )  
are still remaining.

Thanx

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] configtool

[paape]

Hello,

I'm running version 2.0 of the configtool.  I have managed to pull the lower
pane of the configuration
window all the way down and can no longer find it so as to re-display the
output window.  Is there an
easy way to correct this (e.g resetting to some default layout)?


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

[ECOS] Configtool

[Robert Schwebel]

Hi,

I tried to compile the wxWindows based configtool but run into an #error
"Unsupported toolkit". Which version of wxWindows is known to work with
current eCos CVS?

Is there a terminal configuration tool (something like 'make menuconfig'
for Linux)?

Robert
--
 +--------------------------------------------------------+
 | Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de |
 | Pengutronix - Linux Solutions for Science and Industry |
 |   Braunschweiger Str. 79,  31134 Hildesheim, Germany   |
 |    Phone: +49-5121-28619-0 |  Fax: +49-5121-28619-4    |
 +--------------------------------------------------------+


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

Re: [ECOS] Configtool

[Andrew Lunn]

On Wed, Mar 06, 2002 at 07:43:01AM +0100, Robert Schwebel wrote:
> Is there a terminal configuration tool (something like 'make menuconfig'
> for Linux)?

Yes, ecosconfig. Its part of the host tools.

     Andrew

-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

Re: [ECOS] Configtool

[Robert Schwebel]

On Wed, 6 Mar 2002, Andrew Lunn wrote:
> Yes, ecosconfig. Its part of the host tools.

ecosconfig seems to be command line oriented only - is there no menu
driven text mode utility? It's rather difficult to find out how things are
meant to be, and the online documentation doesn't really help for all the
details...

Robert
--
 +--------------------------------------------------------+
 | Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de |
 | Pengutronix - Linux Solutions for Science and Industry |
 |   Braunschweiger Str. 79,  31134 Hildesheim, Germany   |
 |    Phone: +49-5121-28619-0 |  Fax: +49-5121-28619-4    |
 +--------------------------------------------------------+



-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

Re: [ECOS] Configtool

[Julian Smart]

At 07:43 06/03/2002 +0100, Robert Schwebel wrote:
>I tried to compile the wxWindows based configtool but run into an #error
>"Unsupported toolkit". Which version of wxWindows is known to work with
>current eCos CVS?

I suspect there was a configure problem, because absence-of-toolkit errors 
should be picked up at the configure stage.

I recently corrected some compilos in Configtool so it will compile against 
the latest wxWindows CVS trunk. I also updated stable wxWindows snapshots 
for Windows and Linux and made them available within Red Hat but it will 
need to wait until Jonathan Larmour comes back from holiday next week 
before they are put on the ftp site.

There are precompiled versions of the configtool for Linux and Windows on 
the ftp site.

>Is there a terminal configuration tool (something like 'make menuconfig'
>for Linux)?

ecosconfig is quite easy to build using 'configure' in the host directory.

Regards,

Julian
========================================================================
Julian Smart              mailto:julian.smart@btopenworld.com
3 Water Street            http://www.anthemion.co.uk
Stamford, Lincs           +44 (0)1780 765976
U.K. PE9 2NJ
========================================================================


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

[ECOS] ConfigTool

[Omar Khan]

Hi folks,

On a slightly offbeat note, can anyone confirm to me that ConfigTool is
being used to configure the embedded Linux stuff.

:---------------------------------------------------------------------------
------------)
Omar Khan - 2nd year student placement
Panasonic European Core Software Development Centre / Panasonic OWL
Address: 2 Anderson Place, Edinburgh EH6 5NP, Scotland, UK

Re: [ECOS] ConfigTool

[Jesper Skov]

On Thu, 2001-11-29 at 15:22, Omar Khan wrote:
> Hi folks,
> 
> On a slightly offbeat note, can anyone confirm to me that ConfigTool is
> being used to configure the embedded Linux stuff.

Yes. It's _not_.

Jesper

Re: [ECOS] ConfigTool

[Jesper Skov]

On Thu, 2001-11-29 at 15:22, Omar Khan wrote:
> Hi folks,
> 
> On a slightly offbeat note, can anyone confirm to me that ConfigTool is
> being used to configure the embedded Linux stuff.

Yes. It's _not_.

Jesper

[ECOS] ConfigTool

[Omar Khan]

Hi folks,

On a slightly offbeat note, can anyone confirm to me that ConfigTool is
being used to configure the embedded Linux stuff.

:---------------------------------------------------------------------------
------------)
Omar Khan - 2nd year student placement
Panasonic European Core Software Development Centre / Panasonic OWL
Address: 2 Anderson Place, Edinburgh EH6 5NP, Scotland, UK