From: liuhongt <hongtao.liu@intel.com>
To: gcc-patches@gcc.gnu.org
Subject: [PATCH V2] Extend 16/32-bit vector bit_op patterns with (m, 0, i) alternative.
Date: Tue, 19 Jul 2022 14:07:36 +0800 [thread overview]
Message-ID: <20220719060736.18399-1-hongtao.liu@intel.com> (raw)
In-Reply-To: <CAFULd4Zha2HMY4d5qUz9rL-4a8Nd6J5s4XOiSe4yETu2z1xCBg@mail.gmail.com>
And split it after reload.
> You will need ix86_binary_operator_ok insn constraint here with
> corresponding expander using ix86_fixup_binary_operands_no_copy to
> prepare insn operands.
Split define_expand with just register_operand, and allow
memory/immediate in define_insn, assume combine/forwprop will do optimization.
> Please use if (!register_operand (operands[2], <MODE>mode)) instead.
Changed.
Update patch.
gcc/ChangeLog:
PR target/106038
* config/i386/mmx.md (<code><mode>3): New define_expand, it's
original "<code><mode>3".
(*<code><mode>3): New define_insn, it's original
"<code><mode>3" be extended to handle memory and immediate
operand with ix86_binary_operator_ok. Also adjust define_split
after it.
(mmxinsnmode): New mode attribute.
(*mov<mode>_imm): Refactor with mmxinsnmode.
* config/i386/predicates.md
(register_or_x86_64_const_vector_operand): New predicate.
gcc/testsuite/ChangeLog:
* gcc.target/i386/pr106038-1.c: New test.
---
gcc/config/i386/mmx.md | 71 ++++++++++++----------
gcc/config/i386/predicates.md | 4 ++
gcc/testsuite/gcc.target/i386/pr106038-1.c | 27 ++++++++
3 files changed, 71 insertions(+), 31 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/i386/pr106038-1.c
diff --git a/gcc/config/i386/mmx.md b/gcc/config/i386/mmx.md
index 3294c1e6274..316b83dd3ac 100644
--- a/gcc/config/i386/mmx.md
+++ b/gcc/config/i386/mmx.md
@@ -86,6 +86,14 @@ (define_mode_attr mmxvecsize
[(V8QI "b") (V4QI "b") (V2QI "b")
(V4HI "w") (V2HI "w") (V2SI "d") (V1DI "q")])
+;; Mapping to same size integral mode.
+(define_mode_attr mmxinsnmode
+ [(V8QI "DI") (V4QI "SI") (V2QI "HI")
+ (V4HI "DI") (V2HI "SI")
+ (V2SI "DI")
+ (V4HF "DI") (V2HF "SI")
+ (V2SF "DI")])
+
(define_mode_attr mmxdoublemode
[(V8QI "V8HI") (V4HI "V4SI")])
@@ -350,22 +358,7 @@ (define_insn_and_split "*mov<mode>_imm"
HOST_WIDE_INT val = ix86_convert_const_vector_to_integer (operands[1],
<MODE>mode);
operands[1] = GEN_INT (val);
- machine_mode mode;
- switch (GET_MODE_SIZE (<MODE>mode))
- {
- case 2:
- mode = HImode;
- break;
- case 4:
- mode = SImode;
- break;
- case 8:
- mode = DImode;
- break;
- default:
- gcc_unreachable ();
- }
- operands[0] = lowpart_subreg (mode, operands[0], <MODE>mode);
+ operands[0] = lowpart_subreg (<mmxinsnmode>mode, operands[0], <MODE>mode);
})
;; For TARGET_64BIT we always round up to 8 bytes.
@@ -2974,33 +2967,49 @@ (define_insn "*mmx_<code><mode>3"
(set_attr "type" "mmxadd,sselog,sselog,sselog")
(set_attr "mode" "DI,TI,TI,TI")])
-(define_insn "<code><mode>3"
- [(set (match_operand:VI_16_32 0 "register_operand" "=?r,x,x,v")
+(define_expand "<code><mode>3"
+ [(parallel
+ [(set (match_operand:VI_16_32 0 "register_operand")
+ (any_logic:VI_16_32
+ (match_operand:VI_16_32 1 "register_operand")
+ (match_operand:VI_16_32 2 "register_operand")))
+ (clobber (reg:CC FLAGS_REG))])]
+ "")
+
+(define_insn "*<code><mode>3"
+ [(set (match_operand:VI_16_32 0 "nonimmediate_operand" "=?r,m,x,x,v")
(any_logic:VI_16_32
- (match_operand:VI_16_32 1 "register_operand" "%0,0,x,v")
- (match_operand:VI_16_32 2 "register_operand" "r,x,x,v")))
+ (match_operand:VI_16_32 1 "nonimmediate_operand" "%0,0,0,x,v")
+ (match_operand:VI_16_32 2 "register_or_x86_64_const_vector_operand" "r,i,x,x,v")))
(clobber (reg:CC FLAGS_REG))]
- ""
+ "ix86_binary_operator_ok (<CODE>, <MODE>mode, operands)"
"#"
- [(set_attr "isa" "*,sse2_noavx,avx,avx512vl")
- (set_attr "type" "alu,sselog,sselog,sselog")
- (set_attr "mode" "SI,TI,TI,TI")])
+ [(set_attr "isa" "*,*,sse2_noavx,avx,avx512vl")
+ (set_attr "type" "alu,alu,sselog,sselog,sselog")
+ (set_attr "mode" "SI,SI,TI,TI,TI")])
(define_split
- [(set (match_operand:VI_16_32 0 "general_reg_operand")
+ [(set (match_operand:VI_16_32 0 "nonimmediate_gr_operand")
(any_logic:VI_16_32
- (match_operand:VI_16_32 1 "general_reg_operand")
- (match_operand:VI_16_32 2 "general_reg_operand")))
+ (match_operand:VI_16_32 1 "nonimmediate_gr_operand")
+ (match_operand:VI_16_32 2 "register_or_x86_64_const_vector_operand")))
(clobber (reg:CC FLAGS_REG))]
"reload_completed"
[(parallel
[(set (match_dup 0)
- (any_logic:SI (match_dup 1) (match_dup 2)))
+ (any_logic:<mmxinsnmode> (match_dup 1) (match_dup 2)))
(clobber (reg:CC FLAGS_REG))])]
{
- operands[2] = lowpart_subreg (SImode, operands[2], <MODE>mode);
- operands[1] = lowpart_subreg (SImode, operands[1], <MODE>mode);
- operands[0] = lowpart_subreg (SImode, operands[0], <MODE>mode);
+ if (!register_operand (operands[2], <MODE>mode))
+ {
+ HOST_WIDE_INT val = ix86_convert_const_vector_to_integer (operands[2],
+ <MODE>mode);
+ operands[2] = GEN_INT (val);
+ }
+ else
+ operands[2] = lowpart_subreg (<mmxinsnmode>mode, operands[2], <MODE>mode);
+ operands[1] = lowpart_subreg (<mmxinsnmode>mode, operands[1], <MODE>mode);
+ operands[0] = lowpart_subreg (<mmxinsnmode>mode, operands[0], <MODE>mode);
})
(define_split
diff --git a/gcc/config/i386/predicates.md b/gcc/config/i386/predicates.md
index c71c453cceb..5f63a7d52f5 100644
--- a/gcc/config/i386/predicates.md
+++ b/gcc/config/i386/predicates.md
@@ -1205,6 +1205,10 @@ (define_predicate "x86_64_const_vector_operand"
return trunc_int_for_mode (val, SImode) == val;
})
+(define_predicate "register_or_x86_64_const_vector_operand"
+ (ior (match_operand 0 "register_operand")
+ (match_operand 0 "x86_64_const_vector_operand")))
+
;; Return true when OP is nonimmediate or standard SSE constant.
(define_predicate "nonimmediate_or_sse_const_operand"
(ior (match_operand 0 "nonimmediate_operand")
diff --git a/gcc/testsuite/gcc.target/i386/pr106038-1.c b/gcc/testsuite/gcc.target/i386/pr106038-1.c
new file mode 100644
index 00000000000..bb52385c8a5
--- /dev/null
+++ b/gcc/testsuite/gcc.target/i386/pr106038-1.c
@@ -0,0 +1,27 @@
+/* { dg-do compile } */
+/* { dg-options "-msse2 -O2" } */
+/* { dg-final { scan-assembler-not "xmm" } } */
+
+void
+foo3 (char* a, char* __restrict b)
+{
+ a[0] &= 1;
+ a[1] &= 2;
+ a[2] &= 3;
+ a[3] &= 3;
+}
+
+void
+foo4 (char* a, char* __restrict b)
+{
+ a[0] &= 1;
+ a[1] &= 2;
+}
+
+
+void
+foo1 (short* a, short* __restrict b)
+{
+ a[0] &= 1;
+ a[1] &= 2;
+}
--
2.18.1
next prev parent reply other threads:[~2022-07-19 6:07 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-11 1:15 [PATCH] Allocate general register(memory/immediate) for 16/32/64-bit vector bit_op patterns liuhongt
2022-07-11 8:02 ` Uros Bizjak
2022-07-12 6:37 ` Hongtao Liu
2022-07-12 7:15 ` Uros Bizjak
2022-07-14 5:33 ` [PATCH] Extend 64-bit vector bit_op patterns with ?r alternative liuhongt
2022-07-14 7:22 ` Uros Bizjak
2022-07-14 9:32 ` Hongtao Liu
2022-07-14 9:46 ` Uros Bizjak
2022-07-18 1:59 ` [PATCH] Extend 16/32-bit vector bit_op patterns with (m, 0, i)(vertical) alternative liuhongt
2022-07-18 6:28 ` [PATCH] Extend 16/32-bit vector bit_op patterns with (m,0,i)(vertical) alternative Uros Bizjak
2022-07-19 6:07 ` liuhongt [this message]
2022-07-19 6:34 ` [PATCH V2] Extend 16/32-bit vector bit_op patterns with (m, 0, i) alternative Uros Bizjak
2022-07-19 6:56 ` Hongtao Liu
2022-07-19 9:37 ` Uros Bizjak
2022-07-20 2:37 ` Hongtao Liu
2022-07-20 6:14 ` Uros Bizjak
2022-07-20 6:18 ` Uros Bizjak
2022-07-20 6:54 ` Hongtao Liu
2022-07-20 7:18 ` Uros Bizjak
2022-07-20 7:22 ` Hongtao Liu
2022-07-21 5:18 ` [PATCH V3] " liuhongt
2022-07-21 5:55 ` Uros Bizjak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220719060736.18399-1-hongtao.liu@intel.com \
--to=hongtao.liu@intel.com \
--cc=gcc-patches@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).