From: Tamar Christina <Tamar.Christina@arm.com>
To: Richard Sandiford <Richard.Sandiford@arm.com>
Cc: "gcc-patches@gcc.gnu.org" <gcc-patches@gcc.gnu.org>,
Richard Earnshaw <Richard.Earnshaw@arm.com>, nd <nd@arm.com>,
Marcus Shawcroft <Marcus.Shawcroft@arm.com>
Subject: RE: [PATCH 2/2]AArch64 Support new tbranch optab.
Date: Tue, 15 Nov 2022 11:23:24 +0000 [thread overview]
Message-ID: <VI1PR08MB53253860DD16B5844B9DCEF3FF049@VI1PR08MB5325.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <mptv8ngjwpi.fsf@arm.com>
> -----Original Message-----
> From: Richard Sandiford <richard.sandiford@arm.com>
> Sent: Tuesday, November 15, 2022 11:15 AM
> To: Tamar Christina <Tamar.Christina@arm.com>
> Cc: gcc-patches@gcc.gnu.org; Richard Earnshaw
> <Richard.Earnshaw@arm.com>; nd <nd@arm.com>; Marcus Shawcroft
> <Marcus.Shawcroft@arm.com>
> Subject: Re: [PATCH 2/2]AArch64 Support new tbranch optab.
>
> Tamar Christina <Tamar.Christina@arm.com> writes:
> >> -----Original Message-----
> >> From: Richard Sandiford <richard.sandiford@arm.com>
> >> Sent: Tuesday, November 15, 2022 10:51 AM
> >> To: Tamar Christina <Tamar.Christina@arm.com>
> >> Cc: gcc-patches@gcc.gnu.org; Richard Earnshaw
> >> <Richard.Earnshaw@arm.com>; nd <nd@arm.com>; Marcus Shawcroft
> >> <Marcus.Shawcroft@arm.com>
> >> Subject: Re: [PATCH 2/2]AArch64 Support new tbranch optab.
> >>
> >> Tamar Christina <Tamar.Christina@arm.com> writes:
> >> >> -----Original Message-----
> >> >> From: Richard Sandiford <richard.sandiford@arm.com>
> >> >> Sent: Tuesday, November 15, 2022 10:36 AM
> >> >> To: Tamar Christina <Tamar.Christina@arm.com>
> >> >> Cc: gcc-patches@gcc.gnu.org; Richard Earnshaw
> >> >> <Richard.Earnshaw@arm.com>; nd <nd@arm.com>; Marcus
> Shawcroft
> >> >> <Marcus.Shawcroft@arm.com>
> >> >> Subject: Re: [PATCH 2/2]AArch64 Support new tbranch optab.
> >> >>
> >> >> Tamar Christina <Tamar.Christina@arm.com> writes:
> >> >> > Hello,
> >> >> >
> >> >> > Ping and updated patch.
> >> >> >
> >> >> > Bootstrapped Regtested on aarch64-none-linux-gnu and no issues.
> >> >> >
> >> >> > Ok for master?
> >> >> >
> >> >> > Thanks,
> >> >> > Tamar
> >> >> >
> >> >> > gcc/ChangeLog:
> >> >> >
> >> >> > * config/aarch64/aarch64.md (*tb<optab><mode>1): Rename
> to...
> >> >> > (*tb<optab><ALLI:mode><GPI:mode>1): ... this.
> >> >> > (tbranch<mode>4): New.
> >> >> >
> >> >> > gcc/testsuite/ChangeLog:
> >> >> >
> >> >> > * gcc.target/aarch64/tbz_1.c: New test.
> >> >> >
> >> >> > --- inline copy of patch ---
> >> >> >
> >> >> > diff --git a/gcc/config/aarch64/aarch64.md
> >> >> > b/gcc/config/aarch64/aarch64.md index
> >> >> >
> >> >>
> >>
> 2bc2684b82c35a44e0a2cea6e3aaf32d939f8cdf..d7684c93fba5b717d568e1a4fd
> >> >> 71
> >> >> > 2bde55c7c72e 100644
> >> >> > --- a/gcc/config/aarch64/aarch64.md
> >> >> > +++ b/gcc/config/aarch64/aarch64.md
> >> >> > @@ -943,12 +943,29 @@ (define_insn "*cb<optab><mode>1"
> >> >> > (const_int 1)))]
> >> >> > )
> >> >> >
> >> >> > -(define_insn "*tb<optab><mode>1"
> >> >> > +(define_expand "tbranch<mode>4"
> >> >> > [(set (pc) (if_then_else
> >> >> > - (EQL (zero_extract:DI (match_operand:GPI 0
> "register_operand"
> >> >> "r")
> >> >> > - (const_int 1)
> >> >> > - (match_operand 1
> >> >> > - "aarch64_simd_shift_imm_<mode>" "n"))
> >> >> > + (match_operator 0 "aarch64_comparison_operator"
> >> >> > + [(match_operand:ALLI 1 "register_operand")
> >> >> > + (match_operand:ALLI 2
> >> >> "aarch64_simd_shift_imm_<ALLI:mode>")])
> >> >> > + (label_ref (match_operand 3 "" ""))
> >> >> > + (pc)))]
> >> >> > + "optimize > 0"
> >> >>
> >> >> Why's the pattern conditional on optimize? Seems a valid choice
> >> >> at -O0
> >> too.
> >> >>
> >> >
> >> > Hi,
> >> >
> >> > I had explained the reason why in the original patch, just didn't
> >> > repeat it in
> >> the ping:
> >> >
> >> > Instead of emitting the instruction directly I've chosen to expand
> >> > the pattern using a zero extract and generating the existing
> >> > pattern for comparisons for two
> >> > reasons:
> >> >
> >> > 1. Allows for CSE of the actual comparison.
> >> > 2. It looks like the code in expand makes the label as unused and
> >> > removed
> >> it
> >> > if it doesn't see a separate reference to it.
> >> >
> >> > Because of this expansion though I disable the pattern at -O0 since
> >> > we
> >> have no combine in that case so we'd end up with worse code. I did
> >> try emitting the pattern directly, but as mentioned in no#2 expand
> >> would then kill the label.
> >> >
> >> > Basically I emit the pattern directly, immediately during expand
> >> > the label is
> >> marked as dead for some weird reason.
> >>
> >> Isn't #2 a bug though? It seems like something we should fix rather
> >> than work around.
> >
> > Yes it's a bug ☹ ok if I'm going to fix that bug then do I need to
> > split the optabs still? Isn't the problem atm that I need the split?
> > If I'm emitting the instruction directly then the recog pattern for it
> > can just be (eq (vec_extract x 1) 0) which is the correct semantics?
>
> What rtx does the code that uses the optab pass for operand 0?
It gets passed the full comparison:
(eq (reg/v:SI 92 [ x ])
(const_int 0 [0]))
of which we only look at the operator.
Tamar.
>
> Richard
next prev parent reply other threads:[~2022-11-15 11:23 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-31 11:53 [PATCH 1/2]middle-end: Add new tbranch optab to add support for bit-test-and-branch operations Tamar Christina
2022-10-31 11:53 ` [PATCH 2/2]AArch64 Support new tbranch optab Tamar Christina
2022-11-14 15:58 ` Tamar Christina
2022-11-15 10:36 ` Richard Sandiford
2022-11-15 10:42 ` Tamar Christina
2022-11-15 10:50 ` Richard Sandiford
2022-11-15 11:00 ` Tamar Christina
2022-11-15 11:14 ` Richard Sandiford
2022-11-15 11:23 ` Tamar Christina [this message]
2022-11-15 11:33 ` Richard Sandiford
2022-11-15 11:39 ` Tamar Christina
2022-11-22 13:48 ` Tamar Christina
2022-11-22 14:00 ` Richard Sandiford
2022-11-24 12:18 ` Tamar Christina
2022-12-01 16:44 ` Tamar Christina
2022-12-05 14:06 ` Richard Sandiford
2022-10-31 11:54 ` [PATCH]AArch64 Extend umov and sbfx patterns Tamar Christina
2022-10-31 12:26 ` Richard Sandiford
2022-11-11 14:42 ` Tamar Christina
2022-11-15 11:10 ` Richard Sandiford
2022-10-31 21:16 ` [PATCH 1/2]middle-end: Add new tbranch optab to add support for bit-test-and-branch operations Jeff Law
2022-11-01 15:53 ` Tamar Christina
2022-11-01 17:00 ` Jeff Law
2022-11-02 9:55 ` Tamar Christina
2022-11-02 11:08 ` Aldy Hernandez
2022-11-05 14:23 ` Richard Biener
2022-11-14 15:56 ` Tamar Christina
2022-11-14 16:22 ` Jeff Law
2022-11-15 7:33 ` Richard Biener
2022-12-01 16:29 ` Tamar Christina
2022-12-02 7:09 ` Richard Biener
2022-12-05 12:00 ` Richard Sandiford
2022-12-05 13:14 ` Richard Sandiford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=VI1PR08MB53253860DD16B5844B9DCEF3FF049@VI1PR08MB5325.eurprd08.prod.outlook.com \
--to=tamar.christina@arm.com \
--cc=Marcus.Shawcroft@arm.com \
--cc=Richard.Earnshaw@arm.com \
--cc=Richard.Sandiford@arm.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=nd@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).