* Support
@ 2022-12-09 9:32 rajrao
0 siblings, 0 replies; 14+ messages in thread
From: rajrao @ 2022-12-09 9:32 UTC (permalink / raw)
To: gcc
[-- Attachment #1: Type: text/plain, Size: 277 bytes --]
Dear team,
I am working in the compiler domain.
Can you please provide the source application where the mis-compilation
errors occurred which has been detected by the GCC compiler.
This support is very helpful for my PHD work.
-
P Rajshekhar Rao
Thanks and Regards
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Support
2000-02-01 20:03 ` Support Alexandre Oliva
@ 2000-02-01 20:20 ` Jeffrey A Law
0 siblings, 0 replies; 14+ messages in thread
From: Jeffrey A Law @ 2000-02-01 20:20 UTC (permalink / raw)
To: Alexandre Oliva; +Cc: Galloway, Greg (ISSAtlanta), Rahul Parasnis, gcc
In message < orzotktfmp.fsf@garnize.lsd.ic.unicamp.br >you write:
> On Jan 31, 2000, Jeffrey A Law <law@cygnus.com> wrote:
>
> > In message <DF3CC311E898D311A3670008C709BD232EE970@msgatl01.iss.net>you
> write:
>
> >> How about gas from binutils-2.9.1?
>
> > Unknown. Probably yes since I don't remember any hpux11 specific
> > assembler issues.
>
> No changes for 64bit support? I assume this has been introduced in
> HP/UX 11, but this assumption may be totally off-base, since only
> recently I have gained guest access to an HP/UX machine.
64bit ELF is a completely separate issue. hpux11 also has a 32bit SOM mode
just like earlier versions of hpux.
jeff
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Support
2000-02-01 1:37 Support Rahul Parasnis
2000-02-01 8:57 ` Support Joe Buck
@ 2000-02-01 20:08 ` Alexandre Oliva
1 sibling, 0 replies; 14+ messages in thread
From: Alexandre Oliva @ 2000-02-01 20:08 UTC (permalink / raw)
To: Rahul Parasnis; +Cc: gcc
On Feb 1, 2000, Rahul Parasnis <rahul.parasnis@creditlyonnais.fr> wrote:
> Couls you please tell where I am going wrong ?
Looks like you managed to mess with the timestamps of some of the
files, so you'll need to install `bison' or make careful use of
`touch' to get the timestamps fixed. Or get `contrib/gcc_update' from
the CVS tree and run it with --touch to fix any timestamp problems.
--
Alexandre Oliva http://www.ic.unicamp.br/~oliva IC-Unicamp, Bra[sz]il
oliva@{lsd.ic.unicamp.br,guarana.{org,com}} aoliva@{acm,computer}.org
oliva@{gnu.org,kaffe.org,{egcs,sourceware}.cygnus.com,samba.org}
** I may forward mail about projects to mailing lists; please use them
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Support
2000-01-31 16:12 ` Support Jeffrey A Law
@ 2000-02-01 20:03 ` Alexandre Oliva
2000-02-01 20:20 ` Support Jeffrey A Law
0 siblings, 1 reply; 14+ messages in thread
From: Alexandre Oliva @ 2000-02-01 20:03 UTC (permalink / raw)
To: law; +Cc: Galloway, Greg (ISSAtlanta), Rahul Parasnis, gcc
On Jan 31, 2000, Jeffrey A Law <law@cygnus.com> wrote:
> In message <DF3CC311E898D311A3670008C709BD232EE970@msgatl01.iss.net>you write:
>> How about gas from binutils-2.9.1?
> Unknown. Probably yes since I don't remember any hpux11 specific
> assembler issues.
No changes for 64bit support? I assume this has been introduced in
HP/UX 11, but this assumption may be totally off-base, since only
recently I have gained guest access to an HP/UX machine.
--
Alexandre Oliva http://www.ic.unicamp.br/~oliva IC-Unicamp, Bra[sz]il
oliva@{lsd.ic.unicamp.br,guarana.{org,com}} aoliva@{acm,computer}.org
oliva@{gnu.org,kaffe.org,{egcs,sourceware}.cygnus.com,samba.org}
** I may forward mail about projects to mailing lists; please use them
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Support
2000-02-01 1:37 Support Rahul Parasnis
@ 2000-02-01 8:57 ` Joe Buck
2000-02-01 20:08 ` Support Alexandre Oliva
1 sibling, 0 replies; 14+ messages in thread
From: Joe Buck @ 2000-02-01 8:57 UTC (permalink / raw)
To: Rahul Parasnis; +Cc: gcc
Your message asks for help, but then threatens us. It contains:
> This e-mail contains confidential information or information belonging
> to Cr=e9dit Lyonnais and is intended solely for the addressees.
> The unauthorised disclosure, use, dissemination or copying (either whole
> or partial) of this e-mail, or any information it contains, is prohibited.
By sending this message to the gcc mailing list, you installed it on
the archive web site where it can be found by all; this would appear to
violate the above prohibition. While I don't believe that the above
text is legally binding, if the various US states pass the terrible UCITA
law it will be.
So should we delete your message from the archive and block your site
so that none of Credit Lyonnais's precious secrets are disclosed? Or
can you convince your superiors to remove that obnoxious notice and
ask the employees to attach it only to highly confidential mail?
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: Support
@ 2000-02-01 7:06 Galloway, Greg (ISSAtlanta)
0 siblings, 0 replies; 14+ messages in thread
From: Galloway, Greg (ISSAtlanta) @ 2000-02-01 7:06 UTC (permalink / raw)
To: 'Russ Allbery', gcc
Russ Allbery [ mailto:rra@stanford.edu ] wrote:
> Alexandre Oliva <oliva@lsd.ic.unicamp.br> writes:
>
> > Nope. No gcc release prior to 2.96 or 2.97 or 3.0 or
> however the next
> > release ends up being called supports HP/UX 11.
>
> Could someone clarify (or point me at the clarification) of
> just what this
> means? I'm surprised by this, given that it compiles cleanly
> out of the
> tarball and compiles Perl with no test suite failures.
This is my experience as well. I've built cleanly out of the
box with gas from binutils 2.9.1. Is there a list of known problems
somewhere?
Thanks,
Greg
^ permalink raw reply [flat|nested] 14+ messages in thread
* Support
@ 2000-02-01 1:37 Rahul Parasnis
2000-02-01 8:57 ` Support Joe Buck
2000-02-01 20:08 ` Support Alexandre Oliva
0 siblings, 2 replies; 14+ messages in thread
From: Rahul Parasnis @ 2000-02-01 1:37 UTC (permalink / raw)
To: gcc
Finally I installed HPUX 10.20 I get following error when I make
make bootstrap
Couls you please tell where I am going wrong ?
t='s,x,x,'; echo ar | sed -e $t ; \
fi; \
fi`" "BISON=`if [ -f /opt/gcc-2.95.2/gcc/../bison/bison ] ; then
case /admdns/gcc-2.95.2/gcc in \
/*) echo /opt/gcc-2.95.2/gcc/../bison/bison -L
/admdns/gcc-2.95.2/gcc/../bison/ ;; \
*) echo /opt/gcc-2.95.2/gcc/../bison/bison -L
/opt/gcc-2.95.2/gcc//admdns/gcc-2.95.2/gcc/../bison/ ;; \
esac; else echo bison ; fi`" "BISONFLAGS=" "CFLAGS=-O2 -g" "CLIB="
"GCC_FOR_TARGET=./xgcc -B/usr/local/hppa1.1-hp-hpux10.20/bin/ -B./
-I/usr/local/hppa1.1-hp-hpux10.20/include" "LDFLAGS=" "LEX=`if [ -f
/opt/gcc-2.95.2/gcc/../flex/flex ] ; then echo /opt/gcc-2.95.2/gcc/../flex/flex
; else echo flex ; fi`" "LEXFLAGS=" "LN=ln" "LN_S=ln -s" "MAKEINFO=`if [ -f
/opt/gcc-2.95.2/gcc/../texinfo/makeinfo/Makefile ] ; \
then echo /opt/gcc-2.95.2/gcc/../texinfo/makeinfo/makeinfo ; \
else echo makeinfo ; fi`" "MAKEINFOFLAGS=" "RANLIB_FOR_TARGET=` if [
-f /opt/gcc-2.95.2/gcc/../binutils/ranlib ] ; then \
echo /opt/gcc-2.95.2/gcc/../binutils/ranlib ; \
else \
if [ "hppa1.1-hp-hpux10.20" = "hppa1.1-hp-hpux10.20" ] ; then \
echo ranlib; \
else \
t='s,x,x,'; echo ranlib | sed -e $t ; \
fi; \
fi`" "RANLIB_TEST_FOR_TARGET=[ -f ` if [ -f
/opt/gcc-2.95.2/gcc/../binutils/ranlib ] ; then \
echo /opt/gcc-2.95.2/gcc/../binutils/ranlib ; \
else \
if [ "hppa1.1-hp-hpux10.20" = "hppa1.1-hp-hpux10.20" ] ; then \
echo ranlib; \
else \
t='s,x,x,'; echo ranlib | sed -e $t ; \
fi; \
fi` ] || ( [ "hppa1.1-hp-hpux10.20" = "hppa1.1-hp-hpux10.20" ] && [
-f /usr/bin/ranlib -o -f /bin/ranlib ] )" "SHELL=/bin/sh"
"STAGE_PREFIX=stage1/" "exeext=" "build_exeext=" "objext=.o"
"exec_prefix=/usr/local" "prefix=/usr/local" "local_prefix=/usr/local"
"gxx_include_dir=/usr/local/lib/gcc-lib/hppa1.1-hp-hpux10.20/2.95.2/../../../..`
echo /usr/local | sed -e 's|^/usr/local||' -e 's|/[^/]*|/..|g'`/include/g++-3"
"tooldir=/usr/local/hppa1.1-hp-hpux10.20"
"gcc_tooldir=/usr/local/lib/gcc-lib/hppa1.1-hp-hpux10.20/2.95.2/../../../../hppa
1.1-hp-hpux10.20" "bindir=/usr/local/bin"
"libsubdir=/usr/local/lib/gcc-lib/hppa1.1-hp-hpux10.20/2.95.2"
"datadir=/usr/local/share" "distdir=../tmp/\$(subdir)"
"localedir=/usr/local/share/locale" "CC=stage1/xgcc -Bstage1/
-B/usr/local/hppa1.1-hp-hpux10.20/bin/" "JAVA_FOR_BUILD=" "JAVAFLAGS="
"JAVA_FOR_TARGET=" ../jc1
here=`pwd`; sdir=`cd /admdns/gcc-2.95.2/gcc/java && pwd`; if test -f
../../bison; then bison="$here/../../bison/bison -L $sdir"; else bison=bison;
fi; \
cd /admdns/gcc-2.95.2/gcc/java && $bison -t --name-prefix=java_ \
-o parse.c ./parse.y
sh[2]: bison: not found.
*** Error exit code 127
Stop.
*** Error exit code 1
Stop.
*** Error exit code 1
Stop.
*** Error exit code 1
Stop.
Regards
- Rahul Parasnis
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Support
2000-01-31 12:48 ` Support Alexandre Oliva
@ 2000-01-31 22:31 ` Russ Allbery
0 siblings, 0 replies; 14+ messages in thread
From: Russ Allbery @ 2000-01-31 22:31 UTC (permalink / raw)
To: gcc
Alexandre Oliva <oliva@lsd.ic.unicamp.br> writes:
> Nope. No gcc release prior to 2.96 or 2.97 or 3.0 or however the next
> release ends up being called supports HP/UX 11.
Could someone clarify (or point me at the clarification) of just what this
means? I'm surprised by this, given that it compiles cleanly out of the
tarball and compiles Perl with no test suite failures.
amyimage:~> gcc -v
Reading specs from /usr/pubsw/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.1/specs
gcc version 2.95.1 19990816 (release)
amyimage:~> uname -a
HP-UX amyimage B.11.00 A 9000/780 2005717121 two-user license
amyimage:~> cat > hello.c
#include <stdio.h>
int main(void) { printf("Hello world!\n"); }
amyimage:~> gcc -o hello hello.c
amyimage:~> ./hello
Hello world!
--
Russ Allbery (rra@stanford.edu) <URL: http://www.eyrie.org/~eagle/ >
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Support
2000-01-31 12:44 Support Galloway, Greg (ISSAtlanta)
2000-01-31 12:48 ` Support Alexandre Oliva
@ 2000-01-31 16:12 ` Jeffrey A Law
2000-02-01 20:03 ` Support Alexandre Oliva
1 sibling, 1 reply; 14+ messages in thread
From: Jeffrey A Law @ 2000-01-31 16:12 UTC (permalink / raw)
To: Galloway, Greg (ISSAtlanta)
Cc: 'Alexandre Oliva', Rahul Parasnis, gcc
In message < DF3CC311E898D311A3670008C709BD232EE970@msgatl01.iss.net >you write
:
> Is HP/UX 11 supported in gcc 2.95.1?
No.
> How about gas from binutils-2.9.1?
Unknown. Probably yes since I don't remember any hpux11 specific assembler
issues.
jeff
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Support
2000-01-31 12:44 Support Galloway, Greg (ISSAtlanta)
@ 2000-01-31 12:48 ` Alexandre Oliva
2000-01-31 22:31 ` Support Russ Allbery
2000-01-31 16:12 ` Support Jeffrey A Law
1 sibling, 1 reply; 14+ messages in thread
From: Alexandre Oliva @ 2000-01-31 12:48 UTC (permalink / raw)
To: Galloway, Greg (ISSAtlanta); +Cc: Rahul Parasnis, gcc
On Jan 31, 2000, "Galloway, Greg (ISSAtlanta)" <GGalloway@iss.net> wrote:
> Is HP/UX 11 supported in gcc 2.95.1?
Nope. No gcc release prior to 2.96 or 2.97 or 3.0 or however the next
release ends up being called supports HP/UX 11.
> How about gas from binutils-2.9.1?
I bet it doesn't support it either.
--
Alexandre Oliva http://www.ic.unicamp.br/~oliva IC-Unicamp, Bra[sz]il
oliva@{lsd.ic.unicamp.br,guarana.{org,com}} aoliva@{acm,computer}.org
oliva@{gnu.org,kaffe.org,{egcs,sourceware}.cygnus.com,samba.org}
** I may forward mail about projects to mailing lists; please use them
^ permalink raw reply [flat|nested] 14+ messages in thread
* RE: Support
@ 2000-01-31 12:44 Galloway, Greg (ISSAtlanta)
2000-01-31 12:48 ` Support Alexandre Oliva
2000-01-31 16:12 ` Support Jeffrey A Law
0 siblings, 2 replies; 14+ messages in thread
From: Galloway, Greg (ISSAtlanta) @ 2000-01-31 12:44 UTC (permalink / raw)
To: 'Alexandre Oliva', Rahul Parasnis; +Cc: gcc
Is HP/UX 11 supported in gcc 2.95.1?
How about gas from binutils-2.9.1?
Thanks,
Greg
> -----Original Message-----
> From: Alexandre Oliva [ mailto:oliva@lsd.ic.unicamp.br ]
> Sent: Sunday, January 30, 2000 11:58 PM
> To: Rahul Parasnis
> Cc: gcc
> Subject: Re: Support
>
>
> On Jan 31, 2000, Rahul Parasnis
> <rahul.parasnis@creditlyonnais.fr> wrote:
>
> > I have downloaded the gcc-2_95_2_tar software I am not sure
> wheather it will
> > work on HPUX11.0 !!
>
> It won't, sorry. Support for HP/UX 11 is under development.
>
> Even if you manage to build it, with some `how-to's you may find on
> the web, it won't really work: there are some important issues that
> aren't handled correctly in gcc 2.95.2.
>
> --
> Alexandre Oliva http://www.ic.unicamp.br/~oliva IC-Unicamp, Bra[sz]il
> oliva@{lsd.ic.unicamp.br,guarana.{org,com}} aoliva@{acm,computer}.org
> oliva@{gnu.org,kaffe.org,{egcs,sourceware}.cygnus.com,samba.org}
> ** I may forward mail about projects to mailing lists; please use them
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Support
@ 2000-01-30 21:41 N8TM
0 siblings, 0 replies; 14+ messages in thread
From: N8TM @ 2000-01-30 21:41 UTC (permalink / raw)
To: rahul.parasnis, gcc
In a message dated 1/30/2000 8:41:59 PM Pacific Standard Time,
rahul.parasnis@creditlyonnais.fr writes:
> I have downloaded the gcc-2_95_2_tar software I am not sure wheather it
will
> work on HPUX11.0 !!
>
> Could you please give some advice on how to find gcc on HPUX 11.0
gcc-2.95.2 doesn't support HPUX 11 (it won't build "out of the box.")
gcc-2.96 (the current development version) supports HPUX 11 but the warning
about "instability" of development egcs should be heeded. As I myself have
discontinued work with HPUX, I don't know the current quality of that port.
gcc-2.96 will be found on ftp://gcc.cygnus.com/pub/egcs/snapshots and its
mirrors with roughly weekly versions.
Tim
tprince@computer.org
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: Support
2000-01-30 20:40 Support Rahul Parasnis
@ 2000-01-30 20:59 ` Alexandre Oliva
0 siblings, 0 replies; 14+ messages in thread
From: Alexandre Oliva @ 2000-01-30 20:59 UTC (permalink / raw)
To: Rahul Parasnis; +Cc: gcc
On Jan 31, 2000, Rahul Parasnis <rahul.parasnis@creditlyonnais.fr> wrote:
> I have downloaded the gcc-2_95_2_tar software I am not sure wheather it will
> work on HPUX11.0 !!
It won't, sorry. Support for HP/UX 11 is under development.
Even if you manage to build it, with some `how-to's you may find on
the web, it won't really work: there are some important issues that
aren't handled correctly in gcc 2.95.2.
--
Alexandre Oliva http://www.ic.unicamp.br/~oliva IC-Unicamp, Bra[sz]il
oliva@{lsd.ic.unicamp.br,guarana.{org,com}} aoliva@{acm,computer}.org
oliva@{gnu.org,kaffe.org,{egcs,sourceware}.cygnus.com,samba.org}
** I may forward mail about projects to mailing lists; please use them
^ permalink raw reply [flat|nested] 14+ messages in thread
* Support
@ 2000-01-30 20:40 Rahul Parasnis
2000-01-30 20:59 ` Support Alexandre Oliva
0 siblings, 1 reply; 14+ messages in thread
From: Rahul Parasnis @ 2000-01-30 20:40 UTC (permalink / raw)
To: gcc
I have downloaded the gcc-2_95_2_tar software I am not sure wheather it will
work on HPUX11.0 !!
Could you please give some advice on how to find gcc on HPUX 11.0
Thanks
- Rahul Parasnis
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2022-12-09 9:24 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-09 9:32 Support rajrao
-- strict thread matches above, loose matches on Subject: below --
2000-02-01 7:06 Support Galloway, Greg (ISSAtlanta)
2000-02-01 1:37 Support Rahul Parasnis
2000-02-01 8:57 ` Support Joe Buck
2000-02-01 20:08 ` Support Alexandre Oliva
2000-01-31 12:44 Support Galloway, Greg (ISSAtlanta)
2000-01-31 12:48 ` Support Alexandre Oliva
2000-01-31 22:31 ` Support Russ Allbery
2000-01-31 16:12 ` Support Jeffrey A Law
2000-02-01 20:03 ` Support Alexandre Oliva
2000-02-01 20:20 ` Support Jeffrey A Law
2000-01-30 21:41 Support N8TM
2000-01-30 20:40 Support Rahul Parasnis
2000-01-30 20:59 ` Support Alexandre Oliva
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).