* [PATCH v2] aarch64: disable LDP via tuning structure for -mcpu=ampere1/1a
@ 2023-04-14 18:05 Philipp Tomsich
2023-04-17 9:56 ` Kyrylo Tkachov
0 siblings, 1 reply; 6+ messages in thread
From: Philipp Tomsich @ 2023-04-14 18:05 UTC (permalink / raw)
To: gcc-patches; +Cc: Kyrylo Tkachov, Philipp Tomsich, Di Zhao
AmpereOne (-mcpu=ampere1) breaks LDP instructions into two uops.
Given the chance that this causes instructions to slip into the next
decoding cycle and the additional overheads when handling
cacheline-crossing LDP instructions, we disable the generation of LDP
isntructions through the tuning structure from instruction combining
(such as in peephole2).
Given the code-density benefits in builtins and prologue/epilogue
expansion, we allow LDPs there.
This commit:
* adds a new tuning option AARCH64_EXTRA_TUNE_NO_LDP_COMBINE
* allows -moverride=tune=... to override this
These changes are benchmark-driven, yielding the following changes
(with a net-overall improvement):
503.bwaves_r. -0.88%
507.cactuBSSN_r 0.35%
508.namd_r 3.09%
510.parest_r -2.99%
511.povray_r 5.54%
519.lbm_r 15.83%
521.wrf_r 0.56%
526.blender_r 2.47%
527.cam4_r 0.70%
538.imagick_r 0.00%
544.nab_r -0.33%
549.fotonik3d_r. -0.42%
554.roms_r 0.00%
-------------------------
= total 1.79%
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Co-Authored-By: Di Zhao <di.zhao@amperecomputing.com>
gcc/ChangeLog:
* config/aarch64/aarch64-tuning-flags.def (AARCH64_EXTRA_TUNING_OPTION):
Add AARCH64_EXTRA_TUNE_NO_LDP_COMBINE.
* config/aarch64/aarch64.cc (aarch64_operands_ok_for_ldpstp):
Check for the above tuning option when processing loads.
gcc/testsuite/ChangeLog:
* gcc.target/aarch64/ampere1-no_ldp_combine.c: New test.
---
Changes in v2:
- apply both to -mcpu=ampere1 and -mcpu=ampere1a
- add TODO: tag, per discussions on the mailing list
- add testcase
gcc/config/aarch64/aarch64-tuning-flags.def | 3 +++
gcc/config/aarch64/aarch64.cc | 18 ++++++++++++++++--
.../aarch64/ampere1-no_ldp_combine.c | 11 +++++++++++
3 files changed, 30 insertions(+), 2 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
diff --git a/gcc/config/aarch64/aarch64-tuning-flags.def b/gcc/config/aarch64/aarch64-tuning-flags.def
index 712895a5263..52112ba7c48 100644
--- a/gcc/config/aarch64/aarch64-tuning-flags.def
+++ b/gcc/config/aarch64/aarch64-tuning-flags.def
@@ -44,6 +44,9 @@ AARCH64_EXTRA_TUNING_OPTION ("cheap_shift_extend", CHEAP_SHIFT_EXTEND)
/* Disallow load/store pair instructions on Q-registers. */
AARCH64_EXTRA_TUNING_OPTION ("no_ldp_stp_qregs", NO_LDP_STP_QREGS)
+/* Disallow load-pair instructions to be formed in combine/peephole. */
+AARCH64_EXTRA_TUNING_OPTION ("no_ldp_combine", NO_LDP_COMBINE)
+
AARCH64_EXTRA_TUNING_OPTION ("rename_load_regs", RENAME_LOAD_REGS)
AARCH64_EXTRA_TUNING_OPTION ("cse_sve_vl_constants", CSE_SVE_VL_CONSTANTS)
diff --git a/gcc/config/aarch64/aarch64.cc b/gcc/config/aarch64/aarch64.cc
index f4ef22ce02f..0f04ab9fba0 100644
--- a/gcc/config/aarch64/aarch64.cc
+++ b/gcc/config/aarch64/aarch64.cc
@@ -1933,7 +1933,7 @@ static const struct tune_params ampere1_tunings =
2, /* min_div_recip_mul_df. */
0, /* max_case_values. */
tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
- (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
+ (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
&ere1_prefetch_tune
};
@@ -1971,7 +1971,7 @@ static const struct tune_params ampere1a_tunings =
2, /* min_div_recip_mul_df. */
0, /* max_case_values. */
tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
- (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
+ (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
&ere1_prefetch_tune
};
@@ -26053,6 +26053,20 @@ aarch64_operands_ok_for_ldpstp (rtx *operands, bool load,
enum reg_class rclass_1, rclass_2;
rtx mem_1, mem_2, reg_1, reg_2;
+ /* Allow the tuning structure to disable LDP instruction formation
+ from combining instructions (e.g., in peephole2).
+ TODO: Implement fine-grained tuning control for LDP and STP:
+ 1. control policies for load and store separately;
+ 2. support the following policies:
+ - default (use what is in the tuning structure)
+ - always
+ - never
+ - aligned (only if the compiler can prove that the
+ load will be aligned to 2 * element_size) */
+ if (load && (aarch64_tune_params.extra_tuning_flags
+ & AARCH64_EXTRA_TUNE_NO_LDP_COMBINE))
+ return false;
+
if (load)
{
mem_1 = operands[1];
diff --git a/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
new file mode 100644
index 00000000000..bc871f4481d
--- /dev/null
+++ b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
@@ -0,0 +1,11 @@
+/* { dg-options "-O3 -mtune=ampere1" } */
+
+long
+foo (long a[])
+{
+ return a[0] + a[1];
+}
+
+/* We should see two ldrs instead of one ldp. */
+/* { dg-final { scan-assembler {\tldr\t} } } */
+/* { dg-final { scan-assembler-not {\tldp\t} } } */
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH v2] aarch64: disable LDP via tuning structure for -mcpu=ampere1/1a
2023-04-14 18:05 [PATCH v2] aarch64: disable LDP via tuning structure for -mcpu=ampere1/1a Philipp Tomsich
@ 2023-04-17 9:56 ` Kyrylo Tkachov
2023-04-17 10:20 ` Philipp Tomsich
0 siblings, 1 reply; 6+ messages in thread
From: Kyrylo Tkachov @ 2023-04-17 9:56 UTC (permalink / raw)
To: Philipp Tomsich, gcc-patches; +Cc: Di Zhao
> -----Original Message-----
> From: Philipp Tomsich <philipp.tomsich@vrull.eu>
> Sent: Friday, April 14, 2023 7:06 PM
> To: gcc-patches@gcc.gnu.org
> Cc: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>; Philipp Tomsich
> <philipp.tomsich@vrull.eu>; Di Zhao <di.zhao@amperecomputing.com>
> Subject: [PATCH v2] aarch64: disable LDP via tuning structure for -
> mcpu=ampere1/1a
>
> AmpereOne (-mcpu=ampere1) breaks LDP instructions into two uops.
> Given the chance that this causes instructions to slip into the next
> decoding cycle and the additional overheads when handling
> cacheline-crossing LDP instructions, we disable the generation of LDP
> isntructions through the tuning structure from instruction combining
> (such as in peephole2).
>
> Given the code-density benefits in builtins and prologue/epilogue
> expansion, we allow LDPs there.
>
> This commit:
> * adds a new tuning option AARCH64_EXTRA_TUNE_NO_LDP_COMBINE
> * allows -moverride=tune=... to override this
>
> These changes are benchmark-driven, yielding the following changes
> (with a net-overall improvement):
> 503.bwaves_r. -0.88%
> 507.cactuBSSN_r 0.35%
> 508.namd_r 3.09%
> 510.parest_r -2.99%
> 511.povray_r 5.54%
> 519.lbm_r 15.83%
> 521.wrf_r 0.56%
> 526.blender_r 2.47%
> 527.cam4_r 0.70%
> 538.imagick_r 0.00%
> 544.nab_r -0.33%
> 549.fotonik3d_r. -0.42%
> 554.roms_r 0.00%
> -------------------------
> = total 1.79%
>
> Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
> Co-Authored-By: Di Zhao <di.zhao@amperecomputing.com>
Ok.
Thanks,
Kyrill
>
> gcc/ChangeLog:
>
> * config/aarch64/aarch64-tuning-flags.def
> (AARCH64_EXTRA_TUNING_OPTION):
> Add AARCH64_EXTRA_TUNE_NO_LDP_COMBINE.
> * config/aarch64/aarch64.cc (aarch64_operands_ok_for_ldpstp):
> Check for the above tuning option when processing loads.
>
> gcc/testsuite/ChangeLog:
>
> * gcc.target/aarch64/ampere1-no_ldp_combine.c: New test.
>
> ---
>
> Changes in v2:
> - apply both to -mcpu=ampere1 and -mcpu=ampere1a
> - add TODO: tag, per discussions on the mailing list
> - add testcase
>
> gcc/config/aarch64/aarch64-tuning-flags.def | 3 +++
> gcc/config/aarch64/aarch64.cc | 18 ++++++++++++++++--
> .../aarch64/ampere1-no_ldp_combine.c | 11 +++++++++++
> 3 files changed, 30 insertions(+), 2 deletions(-)
> create mode 100644 gcc/testsuite/gcc.target/aarch64/ampere1-
> no_ldp_combine.c
>
> diff --git a/gcc/config/aarch64/aarch64-tuning-flags.def
> b/gcc/config/aarch64/aarch64-tuning-flags.def
> index 712895a5263..52112ba7c48 100644
> --- a/gcc/config/aarch64/aarch64-tuning-flags.def
> +++ b/gcc/config/aarch64/aarch64-tuning-flags.def
> @@ -44,6 +44,9 @@ AARCH64_EXTRA_TUNING_OPTION
> ("cheap_shift_extend", CHEAP_SHIFT_EXTEND)
> /* Disallow load/store pair instructions on Q-registers. */
> AARCH64_EXTRA_TUNING_OPTION ("no_ldp_stp_qregs",
> NO_LDP_STP_QREGS)
>
> +/* Disallow load-pair instructions to be formed in combine/peephole. */
> +AARCH64_EXTRA_TUNING_OPTION ("no_ldp_combine",
> NO_LDP_COMBINE)
> +
> AARCH64_EXTRA_TUNING_OPTION ("rename_load_regs",
> RENAME_LOAD_REGS)
>
> AARCH64_EXTRA_TUNING_OPTION ("cse_sve_vl_constants",
> CSE_SVE_VL_CONSTANTS)
> diff --git a/gcc/config/aarch64/aarch64.cc b/gcc/config/aarch64/aarch64.cc
> index f4ef22ce02f..0f04ab9fba0 100644
> --- a/gcc/config/aarch64/aarch64.cc
> +++ b/gcc/config/aarch64/aarch64.cc
> @@ -1933,7 +1933,7 @@ static const struct tune_params ampere1_tunings =
> 2, /* min_div_recip_mul_df. */
> 0, /* max_case_values. */
> tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> &ere1_prefetch_tune
> };
>
> @@ -1971,7 +1971,7 @@ static const struct tune_params ampere1a_tunings
> =
> 2, /* min_div_recip_mul_df. */
> 0, /* max_case_values. */
> tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> &ere1_prefetch_tune
> };
>
> @@ -26053,6 +26053,20 @@ aarch64_operands_ok_for_ldpstp (rtx
> *operands, bool load,
> enum reg_class rclass_1, rclass_2;
> rtx mem_1, mem_2, reg_1, reg_2;
>
> + /* Allow the tuning structure to disable LDP instruction formation
> + from combining instructions (e.g., in peephole2).
> + TODO: Implement fine-grained tuning control for LDP and STP:
> + 1. control policies for load and store separately;
> + 2. support the following policies:
> + - default (use what is in the tuning structure)
> + - always
> + - never
> + - aligned (only if the compiler can prove that the
> + load will be aligned to 2 * element_size) */
> + if (load && (aarch64_tune_params.extra_tuning_flags
> + & AARCH64_EXTRA_TUNE_NO_LDP_COMBINE))
> + return false;
> +
> if (load)
> {
> mem_1 = operands[1];
> diff --git a/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> new file mode 100644
> index 00000000000..bc871f4481d
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> @@ -0,0 +1,11 @@
> +/* { dg-options "-O3 -mtune=ampere1" } */
> +
> +long
> +foo (long a[])
> +{
> + return a[0] + a[1];
> +}
> +
> +/* We should see two ldrs instead of one ldp. */
> +/* { dg-final { scan-assembler {\tldr\t} } } */
> +/* { dg-final { scan-assembler-not {\tldp\t} } } */
> --
> 2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] aarch64: disable LDP via tuning structure for -mcpu=ampere1/1a
2023-04-17 9:56 ` Kyrylo Tkachov
@ 2023-04-17 10:20 ` Philipp Tomsich
2023-04-17 10:22 ` Philipp Tomsich
0 siblings, 1 reply; 6+ messages in thread
From: Philipp Tomsich @ 2023-04-17 10:20 UTC (permalink / raw)
To: Kyrylo Tkachov; +Cc: gcc-patches, Di Zhao
[-- Attachment #1: Type: text/plain, Size: 6199 bytes --]
Applied to master, thanks!
Philipp.
On Mon, 17 Apr 2023 at 11:56, Kyrylo Tkachov <Kyrylo.Tkachov@arm.com> wrote:
>
>
> > -----Original Message-----
> > From: Philipp Tomsich <philipp.tomsich@vrull.eu>
> > Sent: Friday, April 14, 2023 7:06 PM
> > To: gcc-patches@gcc.gnu.org
> > Cc: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>; Philipp Tomsich
> > <philipp.tomsich@vrull.eu>; Di Zhao <di.zhao@amperecomputing.com>
> > Subject: [PATCH v2] aarch64: disable LDP via tuning structure for -
> > mcpu=ampere1/1a
> >
> > AmpereOne (-mcpu=ampere1) breaks LDP instructions into two uops.
> > Given the chance that this causes instructions to slip into the next
> > decoding cycle and the additional overheads when handling
> > cacheline-crossing LDP instructions, we disable the generation of LDP
> > isntructions through the tuning structure from instruction combining
> > (such as in peephole2).
> >
> > Given the code-density benefits in builtins and prologue/epilogue
> > expansion, we allow LDPs there.
> >
> > This commit:
> > * adds a new tuning option AARCH64_EXTRA_TUNE_NO_LDP_COMBINE
> > * allows -moverride=tune=... to override this
> >
> > These changes are benchmark-driven, yielding the following changes
> > (with a net-overall improvement):
> > 503.bwaves_r. -0.88%
> > 507.cactuBSSN_r 0.35%
> > 508.namd_r 3.09%
> > 510.parest_r -2.99%
> > 511.povray_r 5.54%
> > 519.lbm_r 15.83%
> > 521.wrf_r 0.56%
> > 526.blender_r 2.47%
> > 527.cam4_r 0.70%
> > 538.imagick_r 0.00%
> > 544.nab_r -0.33%
> > 549.fotonik3d_r. -0.42%
> > 554.roms_r 0.00%
> > -------------------------
> > = total 1.79%
> >
> > Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
> > Co-Authored-By: Di Zhao <di.zhao@amperecomputing.com>
>
> Ok.
> Thanks,
> Kyrill
>
> >
> > gcc/ChangeLog:
> >
> > * config/aarch64/aarch64-tuning-flags.def
> > (AARCH64_EXTRA_TUNING_OPTION):
> > Add AARCH64_EXTRA_TUNE_NO_LDP_COMBINE.
> > * config/aarch64/aarch64.cc (aarch64_operands_ok_for_ldpstp):
> > Check for the above tuning option when processing loads.
> >
> > gcc/testsuite/ChangeLog:
> >
> > * gcc.target/aarch64/ampere1-no_ldp_combine.c: New test.
> >
> > ---
> >
> > Changes in v2:
> > - apply both to -mcpu=ampere1 and -mcpu=ampere1a
> > - add TODO: tag, per discussions on the mailing list
> > - add testcase
> >
> > gcc/config/aarch64/aarch64-tuning-flags.def | 3 +++
> > gcc/config/aarch64/aarch64.cc | 18 ++++++++++++++++--
> > .../aarch64/ampere1-no_ldp_combine.c | 11 +++++++++++
> > 3 files changed, 30 insertions(+), 2 deletions(-)
> > create mode 100644 gcc/testsuite/gcc.target/aarch64/ampere1-
> > no_ldp_combine.c
> >
> > diff --git a/gcc/config/aarch64/aarch64-tuning-flags.def
> > b/gcc/config/aarch64/aarch64-tuning-flags.def
> > index 712895a5263..52112ba7c48 100644
> > --- a/gcc/config/aarch64/aarch64-tuning-flags.def
> > +++ b/gcc/config/aarch64/aarch64-tuning-flags.def
> > @@ -44,6 +44,9 @@ AARCH64_EXTRA_TUNING_OPTION
> > ("cheap_shift_extend", CHEAP_SHIFT_EXTEND)
> > /* Disallow load/store pair instructions on Q-registers. */
> > AARCH64_EXTRA_TUNING_OPTION ("no_ldp_stp_qregs",
> > NO_LDP_STP_QREGS)
> >
> > +/* Disallow load-pair instructions to be formed in combine/peephole. */
> > +AARCH64_EXTRA_TUNING_OPTION ("no_ldp_combine",
> > NO_LDP_COMBINE)
> > +
> > AARCH64_EXTRA_TUNING_OPTION ("rename_load_regs",
> > RENAME_LOAD_REGS)
> >
> > AARCH64_EXTRA_TUNING_OPTION ("cse_sve_vl_constants",
> > CSE_SVE_VL_CONSTANTS)
> > diff --git a/gcc/config/aarch64/aarch64.cc
> b/gcc/config/aarch64/aarch64.cc
> > index f4ef22ce02f..0f04ab9fba0 100644
> > --- a/gcc/config/aarch64/aarch64.cc
> > +++ b/gcc/config/aarch64/aarch64.cc
> > @@ -1933,7 +1933,7 @@ static const struct tune_params ampere1_tunings =
> > 2, /* min_div_recip_mul_df. */
> > 0, /* max_case_values. */
> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> > &ere1_prefetch_tune
> > };
> >
> > @@ -1971,7 +1971,7 @@ static const struct tune_params ampere1a_tunings
> > =
> > 2, /* min_div_recip_mul_df. */
> > 0, /* max_case_values. */
> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> > &ere1_prefetch_tune
> > };
> >
> > @@ -26053,6 +26053,20 @@ aarch64_operands_ok_for_ldpstp (rtx
> > *operands, bool load,
> > enum reg_class rclass_1, rclass_2;
> > rtx mem_1, mem_2, reg_1, reg_2;
> >
> > + /* Allow the tuning structure to disable LDP instruction formation
> > + from combining instructions (e.g., in peephole2).
> > + TODO: Implement fine-grained tuning control for LDP and STP:
> > + 1. control policies for load and store separately;
> > + 2. support the following policies:
> > + - default (use what is in the tuning structure)
> > + - always
> > + - never
> > + - aligned (only if the compiler can prove that the
> > + load will be aligned to 2 * element_size) */
> > + if (load && (aarch64_tune_params.extra_tuning_flags
> > + & AARCH64_EXTRA_TUNE_NO_LDP_COMBINE))
> > + return false;
> > +
> > if (load)
> > {
> > mem_1 = operands[1];
> > diff --git a/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> > b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> > new file mode 100644
> > index 00000000000..bc871f4481d
> > --- /dev/null
> > +++ b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> > @@ -0,0 +1,11 @@
> > +/* { dg-options "-O3 -mtune=ampere1" } */
> > +
> > +long
> > +foo (long a[])
> > +{
> > + return a[0] + a[1];
> > +}
> > +
> > +/* We should see two ldrs instead of one ldp. */
> > +/* { dg-final { scan-assembler {\tldr\t} } } */
> > +/* { dg-final { scan-assembler-not {\tldp\t} } } */
> > --
> > 2.34.1
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] aarch64: disable LDP via tuning structure for -mcpu=ampere1/1a
2023-04-17 10:20 ` Philipp Tomsich
@ 2023-04-17 10:22 ` Philipp Tomsich
2023-04-17 15:06 ` Kyrylo Tkachov
0 siblings, 1 reply; 6+ messages in thread
From: Philipp Tomsich @ 2023-04-17 10:22 UTC (permalink / raw)
To: Kyrylo Tkachov; +Cc: gcc-patches, Di Zhao
OK for backport?
This will be all the way down to GCC10, as I just realized that we
need to backport the entire ampere1/1a support to GCC10 (we stopped at
GCC11 for some unexplainable reason)...
Philipp.
On Mon, 17 Apr 2023 at 12:20, Philipp Tomsich <philipp.tomsich@vrull.eu> wrote:
>
> Applied to master, thanks!
> Philipp.
>
> On Mon, 17 Apr 2023 at 11:56, Kyrylo Tkachov <Kyrylo.Tkachov@arm.com> wrote:
>>
>>
>>
>> > -----Original Message-----
>> > From: Philipp Tomsich <philipp.tomsich@vrull.eu>
>> > Sent: Friday, April 14, 2023 7:06 PM
>> > To: gcc-patches@gcc.gnu.org
>> > Cc: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>; Philipp Tomsich
>> > <philipp.tomsich@vrull.eu>; Di Zhao <di.zhao@amperecomputing.com>
>> > Subject: [PATCH v2] aarch64: disable LDP via tuning structure for -
>> > mcpu=ampere1/1a
>> >
>> > AmpereOne (-mcpu=ampere1) breaks LDP instructions into two uops.
>> > Given the chance that this causes instructions to slip into the next
>> > decoding cycle and the additional overheads when handling
>> > cacheline-crossing LDP instructions, we disable the generation of LDP
>> > isntructions through the tuning structure from instruction combining
>> > (such as in peephole2).
>> >
>> > Given the code-density benefits in builtins and prologue/epilogue
>> > expansion, we allow LDPs there.
>> >
>> > This commit:
>> > * adds a new tuning option AARCH64_EXTRA_TUNE_NO_LDP_COMBINE
>> > * allows -moverride=tune=... to override this
>> >
>> > These changes are benchmark-driven, yielding the following changes
>> > (with a net-overall improvement):
>> > 503.bwaves_r. -0.88%
>> > 507.cactuBSSN_r 0.35%
>> > 508.namd_r 3.09%
>> > 510.parest_r -2.99%
>> > 511.povray_r 5.54%
>> > 519.lbm_r 15.83%
>> > 521.wrf_r 0.56%
>> > 526.blender_r 2.47%
>> > 527.cam4_r 0.70%
>> > 538.imagick_r 0.00%
>> > 544.nab_r -0.33%
>> > 549.fotonik3d_r. -0.42%
>> > 554.roms_r 0.00%
>> > -------------------------
>> > = total 1.79%
>> >
>> > Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
>> > Co-Authored-By: Di Zhao <di.zhao@amperecomputing.com>
>>
>> Ok.
>> Thanks,
>> Kyrill
>>
>> >
>> > gcc/ChangeLog:
>> >
>> > * config/aarch64/aarch64-tuning-flags.def
>> > (AARCH64_EXTRA_TUNING_OPTION):
>> > Add AARCH64_EXTRA_TUNE_NO_LDP_COMBINE.
>> > * config/aarch64/aarch64.cc (aarch64_operands_ok_for_ldpstp):
>> > Check for the above tuning option when processing loads.
>> >
>> > gcc/testsuite/ChangeLog:
>> >
>> > * gcc.target/aarch64/ampere1-no_ldp_combine.c: New test.
>> >
>> > ---
>> >
>> > Changes in v2:
>> > - apply both to -mcpu=ampere1 and -mcpu=ampere1a
>> > - add TODO: tag, per discussions on the mailing list
>> > - add testcase
>> >
>> > gcc/config/aarch64/aarch64-tuning-flags.def | 3 +++
>> > gcc/config/aarch64/aarch64.cc | 18 ++++++++++++++++--
>> > .../aarch64/ampere1-no_ldp_combine.c | 11 +++++++++++
>> > 3 files changed, 30 insertions(+), 2 deletions(-)
>> > create mode 100644 gcc/testsuite/gcc.target/aarch64/ampere1-
>> > no_ldp_combine.c
>> >
>> > diff --git a/gcc/config/aarch64/aarch64-tuning-flags.def
>> > b/gcc/config/aarch64/aarch64-tuning-flags.def
>> > index 712895a5263..52112ba7c48 100644
>> > --- a/gcc/config/aarch64/aarch64-tuning-flags.def
>> > +++ b/gcc/config/aarch64/aarch64-tuning-flags.def
>> > @@ -44,6 +44,9 @@ AARCH64_EXTRA_TUNING_OPTION
>> > ("cheap_shift_extend", CHEAP_SHIFT_EXTEND)
>> > /* Disallow load/store pair instructions on Q-registers. */
>> > AARCH64_EXTRA_TUNING_OPTION ("no_ldp_stp_qregs",
>> > NO_LDP_STP_QREGS)
>> >
>> > +/* Disallow load-pair instructions to be formed in combine/peephole. */
>> > +AARCH64_EXTRA_TUNING_OPTION ("no_ldp_combine",
>> > NO_LDP_COMBINE)
>> > +
>> > AARCH64_EXTRA_TUNING_OPTION ("rename_load_regs",
>> > RENAME_LOAD_REGS)
>> >
>> > AARCH64_EXTRA_TUNING_OPTION ("cse_sve_vl_constants",
>> > CSE_SVE_VL_CONSTANTS)
>> > diff --git a/gcc/config/aarch64/aarch64.cc b/gcc/config/aarch64/aarch64.cc
>> > index f4ef22ce02f..0f04ab9fba0 100644
>> > --- a/gcc/config/aarch64/aarch64.cc
>> > +++ b/gcc/config/aarch64/aarch64.cc
>> > @@ -1933,7 +1933,7 @@ static const struct tune_params ampere1_tunings =
>> > 2, /* min_div_recip_mul_df. */
>> > 0, /* max_case_values. */
>> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
>> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
>> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
>> > &ere1_prefetch_tune
>> > };
>> >
>> > @@ -1971,7 +1971,7 @@ static const struct tune_params ampere1a_tunings
>> > =
>> > 2, /* min_div_recip_mul_df. */
>> > 0, /* max_case_values. */
>> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
>> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
>> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
>> > &ere1_prefetch_tune
>> > };
>> >
>> > @@ -26053,6 +26053,20 @@ aarch64_operands_ok_for_ldpstp (rtx
>> > *operands, bool load,
>> > enum reg_class rclass_1, rclass_2;
>> > rtx mem_1, mem_2, reg_1, reg_2;
>> >
>> > + /* Allow the tuning structure to disable LDP instruction formation
>> > + from combining instructions (e.g., in peephole2).
>> > + TODO: Implement fine-grained tuning control for LDP and STP:
>> > + 1. control policies for load and store separately;
>> > + 2. support the following policies:
>> > + - default (use what is in the tuning structure)
>> > + - always
>> > + - never
>> > + - aligned (only if the compiler can prove that the
>> > + load will be aligned to 2 * element_size) */
>> > + if (load && (aarch64_tune_params.extra_tuning_flags
>> > + & AARCH64_EXTRA_TUNE_NO_LDP_COMBINE))
>> > + return false;
>> > +
>> > if (load)
>> > {
>> > mem_1 = operands[1];
>> > diff --git a/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
>> > b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
>> > new file mode 100644
>> > index 00000000000..bc871f4481d
>> > --- /dev/null
>> > +++ b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
>> > @@ -0,0 +1,11 @@
>> > +/* { dg-options "-O3 -mtune=ampere1" } */
>> > +
>> > +long
>> > +foo (long a[])
>> > +{
>> > + return a[0] + a[1];
>> > +}
>> > +
>> > +/* We should see two ldrs instead of one ldp. */
>> > +/* { dg-final { scan-assembler {\tldr\t} } } */
>> > +/* { dg-final { scan-assembler-not {\tldp\t} } } */
>> > --
>> > 2.34.1
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH v2] aarch64: disable LDP via tuning structure for -mcpu=ampere1/1a
2023-04-17 10:22 ` Philipp Tomsich
@ 2023-04-17 15:06 ` Kyrylo Tkachov
2023-04-17 15:49 ` Philipp Tomsich
0 siblings, 1 reply; 6+ messages in thread
From: Kyrylo Tkachov @ 2023-04-17 15:06 UTC (permalink / raw)
To: Philipp Tomsich; +Cc: gcc-patches, Di Zhao
> -----Original Message-----
> From: Philipp Tomsich <philipp.tomsich@vrull.eu>
> Sent: Monday, April 17, 2023 11:22 AM
> To: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
> Cc: gcc-patches@gcc.gnu.org; Di Zhao <di.zhao@amperecomputing.com>
> Subject: Re: [PATCH v2] aarch64: disable LDP via tuning structure for -
> mcpu=ampere1/1a
>
> OK for backport?
> This will be all the way down to GCC10, as I just realized that we
> need to backport the entire ampere1/1a support to GCC10 (we stopped at
> GCC11 for some unexplainable reason)...
Ok, under the principle that we'd already backported the ampere1 support and this is a small and unintrusive change.
But I suppose the change for the branches shouldn't include the TODO note as we would not be extending the LDP restriction support there.
Thanks,
Kyrill
>
> Philipp.
>
>
> On Mon, 17 Apr 2023 at 12:20, Philipp Tomsich <philipp.tomsich@vrull.eu>
> wrote:
> >
> > Applied to master, thanks!
> > Philipp.
> >
> > On Mon, 17 Apr 2023 at 11:56, Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
> wrote:
> >>
> >>
> >>
> >> > -----Original Message-----
> >> > From: Philipp Tomsich <philipp.tomsich@vrull.eu>
> >> > Sent: Friday, April 14, 2023 7:06 PM
> >> > To: gcc-patches@gcc.gnu.org
> >> > Cc: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>; Philipp Tomsich
> >> > <philipp.tomsich@vrull.eu>; Di Zhao <di.zhao@amperecomputing.com>
> >> > Subject: [PATCH v2] aarch64: disable LDP via tuning structure for -
> >> > mcpu=ampere1/1a
> >> >
> >> > AmpereOne (-mcpu=ampere1) breaks LDP instructions into two uops.
> >> > Given the chance that this causes instructions to slip into the next
> >> > decoding cycle and the additional overheads when handling
> >> > cacheline-crossing LDP instructions, we disable the generation of LDP
> >> > isntructions through the tuning structure from instruction combining
> >> > (such as in peephole2).
> >> >
> >> > Given the code-density benefits in builtins and prologue/epilogue
> >> > expansion, we allow LDPs there.
> >> >
> >> > This commit:
> >> > * adds a new tuning option AARCH64_EXTRA_TUNE_NO_LDP_COMBINE
> >> > * allows -moverride=tune=... to override this
> >> >
> >> > These changes are benchmark-driven, yielding the following changes
> >> > (with a net-overall improvement):
> >> > 503.bwaves_r. -0.88%
> >> > 507.cactuBSSN_r 0.35%
> >> > 508.namd_r 3.09%
> >> > 510.parest_r -2.99%
> >> > 511.povray_r 5.54%
> >> > 519.lbm_r 15.83%
> >> > 521.wrf_r 0.56%
> >> > 526.blender_r 2.47%
> >> > 527.cam4_r 0.70%
> >> > 538.imagick_r 0.00%
> >> > 544.nab_r -0.33%
> >> > 549.fotonik3d_r. -0.42%
> >> > 554.roms_r 0.00%
> >> > -------------------------
> >> > = total 1.79%
> >> >
> >> > Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
> >> > Co-Authored-By: Di Zhao <di.zhao@amperecomputing.com>
> >>
> >> Ok.
> >> Thanks,
> >> Kyrill
> >>
> >> >
> >> > gcc/ChangeLog:
> >> >
> >> > * config/aarch64/aarch64-tuning-flags.def
> >> > (AARCH64_EXTRA_TUNING_OPTION):
> >> > Add AARCH64_EXTRA_TUNE_NO_LDP_COMBINE.
> >> > * config/aarch64/aarch64.cc (aarch64_operands_ok_for_ldpstp):
> >> > Check for the above tuning option when processing loads.
> >> >
> >> > gcc/testsuite/ChangeLog:
> >> >
> >> > * gcc.target/aarch64/ampere1-no_ldp_combine.c: New test.
> >> >
> >> > ---
> >> >
> >> > Changes in v2:
> >> > - apply both to -mcpu=ampere1 and -mcpu=ampere1a
> >> > - add TODO: tag, per discussions on the mailing list
> >> > - add testcase
> >> >
> >> > gcc/config/aarch64/aarch64-tuning-flags.def | 3 +++
> >> > gcc/config/aarch64/aarch64.cc | 18 ++++++++++++++++--
> >> > .../aarch64/ampere1-no_ldp_combine.c | 11 +++++++++++
> >> > 3 files changed, 30 insertions(+), 2 deletions(-)
> >> > create mode 100644 gcc/testsuite/gcc.target/aarch64/ampere1-
> >> > no_ldp_combine.c
> >> >
> >> > diff --git a/gcc/config/aarch64/aarch64-tuning-flags.def
> >> > b/gcc/config/aarch64/aarch64-tuning-flags.def
> >> > index 712895a5263..52112ba7c48 100644
> >> > --- a/gcc/config/aarch64/aarch64-tuning-flags.def
> >> > +++ b/gcc/config/aarch64/aarch64-tuning-flags.def
> >> > @@ -44,6 +44,9 @@ AARCH64_EXTRA_TUNING_OPTION
> >> > ("cheap_shift_extend", CHEAP_SHIFT_EXTEND)
> >> > /* Disallow load/store pair instructions on Q-registers. */
> >> > AARCH64_EXTRA_TUNING_OPTION ("no_ldp_stp_qregs",
> >> > NO_LDP_STP_QREGS)
> >> >
> >> > +/* Disallow load-pair instructions to be formed in combine/peephole.
> */
> >> > +AARCH64_EXTRA_TUNING_OPTION ("no_ldp_combine",
> >> > NO_LDP_COMBINE)
> >> > +
> >> > AARCH64_EXTRA_TUNING_OPTION ("rename_load_regs",
> >> > RENAME_LOAD_REGS)
> >> >
> >> > AARCH64_EXTRA_TUNING_OPTION ("cse_sve_vl_constants",
> >> > CSE_SVE_VL_CONSTANTS)
> >> > diff --git a/gcc/config/aarch64/aarch64.cc
> b/gcc/config/aarch64/aarch64.cc
> >> > index f4ef22ce02f..0f04ab9fba0 100644
> >> > --- a/gcc/config/aarch64/aarch64.cc
> >> > +++ b/gcc/config/aarch64/aarch64.cc
> >> > @@ -1933,7 +1933,7 @@ static const struct tune_params
> ampere1_tunings =
> >> > 2, /* min_div_recip_mul_df. */
> >> > 0, /* max_case_values. */
> >> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> >> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> >> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> >> > &ere1_prefetch_tune
> >> > };
> >> >
> >> > @@ -1971,7 +1971,7 @@ static const struct tune_params
> ampere1a_tunings
> >> > =
> >> > 2, /* min_div_recip_mul_df. */
> >> > 0, /* max_case_values. */
> >> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> >> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> >> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> >> > &ere1_prefetch_tune
> >> > };
> >> >
> >> > @@ -26053,6 +26053,20 @@ aarch64_operands_ok_for_ldpstp (rtx
> >> > *operands, bool load,
> >> > enum reg_class rclass_1, rclass_2;
> >> > rtx mem_1, mem_2, reg_1, reg_2;
> >> >
> >> > + /* Allow the tuning structure to disable LDP instruction formation
> >> > + from combining instructions (e.g., in peephole2).
> >> > + TODO: Implement fine-grained tuning control for LDP and STP:
> >> > + 1. control policies for load and store separately;
> >> > + 2. support the following policies:
> >> > + - default (use what is in the tuning structure)
> >> > + - always
> >> > + - never
> >> > + - aligned (only if the compiler can prove that the
> >> > + load will be aligned to 2 * element_size) */
> >> > + if (load && (aarch64_tune_params.extra_tuning_flags
> >> > + & AARCH64_EXTRA_TUNE_NO_LDP_COMBINE))
> >> > + return false;
> >> > +
> >> > if (load)
> >> > {
> >> > mem_1 = operands[1];
> >> > diff --git a/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> >> > b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> >> > new file mode 100644
> >> > index 00000000000..bc871f4481d
> >> > --- /dev/null
> >> > +++ b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> >> > @@ -0,0 +1,11 @@
> >> > +/* { dg-options "-O3 -mtune=ampere1" } */
> >> > +
> >> > +long
> >> > +foo (long a[])
> >> > +{
> >> > + return a[0] + a[1];
> >> > +}
> >> > +
> >> > +/* We should see two ldrs instead of one ldp. */
> >> > +/* { dg-final { scan-assembler {\tldr\t} } } */
> >> > +/* { dg-final { scan-assembler-not {\tldp\t} } } */
> >> > --
> >> > 2.34.1
> >>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] aarch64: disable LDP via tuning structure for -mcpu=ampere1/1a
2023-04-17 15:06 ` Kyrylo Tkachov
@ 2023-04-17 15:49 ` Philipp Tomsich
0 siblings, 0 replies; 6+ messages in thread
From: Philipp Tomsich @ 2023-04-17 15:49 UTC (permalink / raw)
To: Kyrylo Tkachov; +Cc: gcc-patches, Di Zhao
On Mon, 17 Apr 2023 at 17:07, Kyrylo Tkachov <Kyrylo.Tkachov@arm.com> wrote:
>
>
>
> > -----Original Message-----
> > From: Philipp Tomsich <philipp.tomsich@vrull.eu>
> > Sent: Monday, April 17, 2023 11:22 AM
> > To: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
> > Cc: gcc-patches@gcc.gnu.org; Di Zhao <di.zhao@amperecomputing.com>
> > Subject: Re: [PATCH v2] aarch64: disable LDP via tuning structure for -
> > mcpu=ampere1/1a
> >
> > OK for backport?
> > This will be all the way down to GCC10, as I just realized that we
> > need to backport the entire ampere1/1a support to GCC10 (we stopped at
> > GCC11 for some unexplainable reason)...
>
> Ok, under the principle that we'd already backported the ampere1 support and this is a small and unintrusive change.
> But I suppose the change for the branches shouldn't include the TODO note as we would not be extending the LDP restriction support there.
Thanks for the reminder to drop the TODO.
I would have done a straight cherry-pick without this... and regretted it.
Philipp.
>
> Thanks,
> Kyrill
>
> >
> > Philipp.
> >
> >
> > On Mon, 17 Apr 2023 at 12:20, Philipp Tomsich <philipp.tomsich@vrull.eu>
> > wrote:
> > >
> > > Applied to master, thanks!
> > > Philipp.
> > >
> > > On Mon, 17 Apr 2023 at 11:56, Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
> > wrote:
> > >>
> > >>
> > >>
> > >> > -----Original Message-----
> > >> > From: Philipp Tomsich <philipp.tomsich@vrull.eu>
> > >> > Sent: Friday, April 14, 2023 7:06 PM
> > >> > To: gcc-patches@gcc.gnu.org
> > >> > Cc: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>; Philipp Tomsich
> > >> > <philipp.tomsich@vrull.eu>; Di Zhao <di.zhao@amperecomputing.com>
> > >> > Subject: [PATCH v2] aarch64: disable LDP via tuning structure for -
> > >> > mcpu=ampere1/1a
> > >> >
> > >> > AmpereOne (-mcpu=ampere1) breaks LDP instructions into two uops.
> > >> > Given the chance that this causes instructions to slip into the next
> > >> > decoding cycle and the additional overheads when handling
> > >> > cacheline-crossing LDP instructions, we disable the generation of LDP
> > >> > isntructions through the tuning structure from instruction combining
> > >> > (such as in peephole2).
> > >> >
> > >> > Given the code-density benefits in builtins and prologue/epilogue
> > >> > expansion, we allow LDPs there.
> > >> >
> > >> > This commit:
> > >> > * adds a new tuning option AARCH64_EXTRA_TUNE_NO_LDP_COMBINE
> > >> > * allows -moverride=tune=... to override this
> > >> >
> > >> > These changes are benchmark-driven, yielding the following changes
> > >> > (with a net-overall improvement):
> > >> > 503.bwaves_r. -0.88%
> > >> > 507.cactuBSSN_r 0.35%
> > >> > 508.namd_r 3.09%
> > >> > 510.parest_r -2.99%
> > >> > 511.povray_r 5.54%
> > >> > 519.lbm_r 15.83%
> > >> > 521.wrf_r 0.56%
> > >> > 526.blender_r 2.47%
> > >> > 527.cam4_r 0.70%
> > >> > 538.imagick_r 0.00%
> > >> > 544.nab_r -0.33%
> > >> > 549.fotonik3d_r. -0.42%
> > >> > 554.roms_r 0.00%
> > >> > -------------------------
> > >> > = total 1.79%
> > >> >
> > >> > Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
> > >> > Co-Authored-By: Di Zhao <di.zhao@amperecomputing.com>
> > >>
> > >> Ok.
> > >> Thanks,
> > >> Kyrill
> > >>
> > >> >
> > >> > gcc/ChangeLog:
> > >> >
> > >> > * config/aarch64/aarch64-tuning-flags.def
> > >> > (AARCH64_EXTRA_TUNING_OPTION):
> > >> > Add AARCH64_EXTRA_TUNE_NO_LDP_COMBINE.
> > >> > * config/aarch64/aarch64.cc (aarch64_operands_ok_for_ldpstp):
> > >> > Check for the above tuning option when processing loads.
> > >> >
> > >> > gcc/testsuite/ChangeLog:
> > >> >
> > >> > * gcc.target/aarch64/ampere1-no_ldp_combine.c: New test.
> > >> >
> > >> > ---
> > >> >
> > >> > Changes in v2:
> > >> > - apply both to -mcpu=ampere1 and -mcpu=ampere1a
> > >> > - add TODO: tag, per discussions on the mailing list
> > >> > - add testcase
> > >> >
> > >> > gcc/config/aarch64/aarch64-tuning-flags.def | 3 +++
> > >> > gcc/config/aarch64/aarch64.cc | 18 ++++++++++++++++--
> > >> > .../aarch64/ampere1-no_ldp_combine.c | 11 +++++++++++
> > >> > 3 files changed, 30 insertions(+), 2 deletions(-)
> > >> > create mode 100644 gcc/testsuite/gcc.target/aarch64/ampere1-
> > >> > no_ldp_combine.c
> > >> >
> > >> > diff --git a/gcc/config/aarch64/aarch64-tuning-flags.def
> > >> > b/gcc/config/aarch64/aarch64-tuning-flags.def
> > >> > index 712895a5263..52112ba7c48 100644
> > >> > --- a/gcc/config/aarch64/aarch64-tuning-flags.def
> > >> > +++ b/gcc/config/aarch64/aarch64-tuning-flags.def
> > >> > @@ -44,6 +44,9 @@ AARCH64_EXTRA_TUNING_OPTION
> > >> > ("cheap_shift_extend", CHEAP_SHIFT_EXTEND)
> > >> > /* Disallow load/store pair instructions on Q-registers. */
> > >> > AARCH64_EXTRA_TUNING_OPTION ("no_ldp_stp_qregs",
> > >> > NO_LDP_STP_QREGS)
> > >> >
> > >> > +/* Disallow load-pair instructions to be formed in combine/peephole.
> > */
> > >> > +AARCH64_EXTRA_TUNING_OPTION ("no_ldp_combine",
> > >> > NO_LDP_COMBINE)
> > >> > +
> > >> > AARCH64_EXTRA_TUNING_OPTION ("rename_load_regs",
> > >> > RENAME_LOAD_REGS)
> > >> >
> > >> > AARCH64_EXTRA_TUNING_OPTION ("cse_sve_vl_constants",
> > >> > CSE_SVE_VL_CONSTANTS)
> > >> > diff --git a/gcc/config/aarch64/aarch64.cc
> > b/gcc/config/aarch64/aarch64.cc
> > >> > index f4ef22ce02f..0f04ab9fba0 100644
> > >> > --- a/gcc/config/aarch64/aarch64.cc
> > >> > +++ b/gcc/config/aarch64/aarch64.cc
> > >> > @@ -1933,7 +1933,7 @@ static const struct tune_params
> > ampere1_tunings =
> > >> > 2, /* min_div_recip_mul_df. */
> > >> > 0, /* max_case_values. */
> > >> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> > >> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> > >> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> > >> > &ere1_prefetch_tune
> > >> > };
> > >> >
> > >> > @@ -1971,7 +1971,7 @@ static const struct tune_params
> > ampere1a_tunings
> > >> > =
> > >> > 2, /* min_div_recip_mul_df. */
> > >> > 0, /* max_case_values. */
> > >> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> > >> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> > >> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> > >> > &ere1_prefetch_tune
> > >> > };
> > >> >
> > >> > @@ -26053,6 +26053,20 @@ aarch64_operands_ok_for_ldpstp (rtx
> > >> > *operands, bool load,
> > >> > enum reg_class rclass_1, rclass_2;
> > >> > rtx mem_1, mem_2, reg_1, reg_2;
> > >> >
> > >> > + /* Allow the tuning structure to disable LDP instruction formation
> > >> > + from combining instructions (e.g., in peephole2).
> > >> > + TODO: Implement fine-grained tuning control for LDP and STP:
> > >> > + 1. control policies for load and store separately;
> > >> > + 2. support the following policies:
> > >> > + - default (use what is in the tuning structure)
> > >> > + - always
> > >> > + - never
> > >> > + - aligned (only if the compiler can prove that the
> > >> > + load will be aligned to 2 * element_size) */
> > >> > + if (load && (aarch64_tune_params.extra_tuning_flags
> > >> > + & AARCH64_EXTRA_TUNE_NO_LDP_COMBINE))
> > >> > + return false;
> > >> > +
> > >> > if (load)
> > >> > {
> > >> > mem_1 = operands[1];
> > >> > diff --git a/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> > >> > b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> > >> > new file mode 100644
> > >> > index 00000000000..bc871f4481d
> > >> > --- /dev/null
> > >> > +++ b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> > >> > @@ -0,0 +1,11 @@
> > >> > +/* { dg-options "-O3 -mtune=ampere1" } */
> > >> > +
> > >> > +long
> > >> > +foo (long a[])
> > >> > +{
> > >> > + return a[0] + a[1];
> > >> > +}
> > >> > +
> > >> > +/* We should see two ldrs instead of one ldp. */
> > >> > +/* { dg-final { scan-assembler {\tldr\t} } } */
> > >> > +/* { dg-final { scan-assembler-not {\tldp\t} } } */
> > >> > --
> > >> > 2.34.1
> > >>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-04-17 15:49 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-04-14 18:05 [PATCH v2] aarch64: disable LDP via tuning structure for -mcpu=ampere1/1a Philipp Tomsich
2023-04-17 9:56 ` Kyrylo Tkachov
2023-04-17 10:20 ` Philipp Tomsich
2023-04-17 10:22 ` Philipp Tomsich
2023-04-17 15:06 ` Kyrylo Tkachov
2023-04-17 15:49 ` Philipp Tomsich
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).