From: Jan Kratochvil <jan.kratochvil@redhat.com>
To: gdb-patches@sourceware.org
Cc: Aleksandar Ristovski <ARistovski@qnx.com>
Subject: [PATCH v7 05/10] Move gdb_regex* to common/
Date: Sun, 14 Jun 2015 19:26:00 -0000 [thread overview]
Message-ID: <20150614192621.18346.73242.stgit@host1.jankratochvil.net> (raw)
In-Reply-To: <20150614192542.18346.87859.stgit@host1.jankratochvil.net>
Hi,
later patches need regex support also in gdbserver.
New patch, not yet reviewed before.
Jan
gdb/ChangeLog
2015-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (HFILES_NO_SRCDIR): Change gdb_regex.h to
common/gdb_regex.h.
(COMMON_OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* common/common.m4 (GDB_AC_COMMON): Add gdb_use_included_regex,
--without-included-regex and USE_INCLUDED_REGEX.
* common/gdb_regex.c: New file from utils.c functions.
* common/gdb_regex.h: Move it here from gdb_regex.h, update include
file wrapping define name.
* configure: Rebuilt.
* configure.ac (gdb_use_included_regex, --without-included-regex)
(USE_INCLUDED_REGEX): Move them to common/common.m4.
* gdb_regex.h: Move it to common/gdb_regex.h.
* utils.c: Remove include gdb_regex.h.
(do_regfree_cleanup, make_regfree_cleanup, get_regcomp_error)
(compile_rx_or_error): Move them to common/gdb_regex.c.
gdb/gdbserver/ChangeLog
2015-06-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* Makefile.in (OBS): Add gdb_regex.o.
(gdb_regex.o): New.
* config.in: Rebuilt.
* configure: Rebuilt.
---
gdb/Makefile.in | 7 +++
gdb/common/common.m4 | 29 +++++++++++++
gdb/common/gdb_regex.c | 73 ++++++++++++++++++++++++++++++++
gdb/common/gdb_regex.h | 36 ++++++++++++++++
gdb/configure | 102 +++++++++++++++++++++++----------------------
gdb/configure.ac | 29 -------------
gdb/gdb_regex.h | 36 ----------------
gdb/gdbserver/Makefile.in | 4 ++
gdb/gdbserver/config.in | 3 +
gdb/gdbserver/configure | 56 +++++++++++++++++++++++++
gdb/utils.c | 55 ------------------------
11 files changed, 258 insertions(+), 172 deletions(-)
create mode 100644 gdb/common/gdb_regex.c
create mode 100644 gdb/common/gdb_regex.h
delete mode 100644 gdb/gdb_regex.h
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 5fefd49..2d03e2a 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -934,7 +934,7 @@ extension.h extension-priv.h \
build-id.h buildsym.h valprint.h \
typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
-complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
+complaints.h gdb_proc_service.h common/gdb_regex.h xtensa-tdep.h inf-loop.h \
common/gdb_wait.h common/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
@@ -1081,6 +1081,7 @@ COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
format.o registry.o btrace.o record-btrace.o waitstatus.o \
print-utils.o rsp-low.o errors.o common-debug.o debug.o \
common-exceptions.o btrace-common.o fileio.o target-utils.o \
+ gdb_regex.o \
$(SUBDIR_GCC_COMPILE_OBS)
TSOBS = inflow.o
@@ -2269,6 +2270,10 @@ btrace-common.o: ${srcdir}/common/btrace-common.c
fileio.o: ${srcdir}/common/fileio.c
$(COMPILE) $(srcdir)/common/fileio.c
$(POSTCOMPILE)
+
+gdb_regex.o: ${srcdir}/common/gdb_regex.c
+ $(COMPILE) $(srcdir)/common/gdb_regex.c
+ $(POSTCOMPILE)
#
# gdb/target/ dependencies
#
diff --git a/gdb/common/common.m4 b/gdb/common/common.m4
index a87579a..e48dd5a 100644
--- a/gdb/common/common.m4
+++ b/gdb/common/common.m4
@@ -44,4 +44,33 @@ gdb_cv_func_sigsetjmp=yes, gdb_cv_func_sigsetjmp=no)])
if test $gdb_cv_func_sigsetjmp = yes; then
AC_DEFINE(HAVE_SIGSETJMP, 1, [Define if sigsetjmp is available. ])
fi
+
+ # Assume we'll default to using the included libiberty regex.
+ gdb_use_included_regex=yes
+
+ # However, if the system regex is GNU regex, then default to *not*
+ # using the included regex.
+ AC_CACHE_CHECK(
+ [for GNU regex],
+ [gdb_cv_have_gnu_regex],
+ [AC_TRY_COMPILE(
+ [#include <gnu-versions.h>],
+ [#define REGEX_INTERFACE_VERSION 1
+ #if _GNU_REGEX_INTERFACE_VERSION != REGEX_INTERFACE_VERSION
+ # error "Version mismatch"
+ #endif],
+ gdb_cv_have_gnu_regex=yes,
+ gdb_cv_have_gnu_regex=no)])
+ if test $gdb_cv_have_gnu_regex = yes; then
+ gdb_use_included_regex=no
+ fi
+
+ AC_ARG_WITH(included-regex,
+ AS_HELP_STRING([--without-included-regex], [don't use included regex; this is the default on systems with version 2 of the GNU C library (use with caution on other system)]),
+ gdb_with_regex=$withval,
+ gdb_with_regex=$gdb_use_included_regex)
+ if test "$gdb_with_regex" = yes; then
+ AC_DEFINE(USE_INCLUDED_REGEX, 1,
+ [Define to 1 if the regex included in libiberty should be used.])
+ fi
])
diff --git a/gdb/common/gdb_regex.c b/gdb/common/gdb_regex.c
new file mode 100644
index 0000000..73f30a7
--- /dev/null
+++ b/gdb/common/gdb_regex.c
@@ -0,0 +1,73 @@
+/* Shared utility routines for GDB to interact with agent.
+
+ Copyright (C) 2009-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "common-defs.h"
+#include "gdb_regex.h"
+
+/* A cleanup function that calls regfree. */
+
+static void
+do_regfree_cleanup (void *r)
+{
+ regfree (r);
+}
+
+/* Create a new cleanup that frees the compiled regular expression R. */
+
+struct cleanup *
+make_regfree_cleanup (regex_t *r)
+{
+ return make_cleanup (do_regfree_cleanup, r);
+}
+
+/* Return an xmalloc'd error message resulting from a regular
+ expression compilation failure. */
+
+char *
+get_regcomp_error (int code, regex_t *rx)
+{
+ size_t length = regerror (code, rx, NULL, 0);
+ char *result = xmalloc (length);
+
+ regerror (code, rx, result, length);
+ return result;
+}
+
+/* Compile a regexp and throw an exception on error. This returns a
+ cleanup to free the resulting pattern on success. RX must not be
+ NULL. */
+
+struct cleanup *
+compile_rx_or_error (regex_t *pattern, const char *rx, const char *message)
+{
+ int code;
+
+ gdb_assert (rx != NULL);
+
+ code = regcomp (pattern, rx, REG_NOSUB);
+ if (code != 0)
+ {
+ char *err = get_regcomp_error (code, pattern);
+
+ make_cleanup (xfree, err);
+ error (("%s: %s"), message, err);
+ }
+
+ return make_regfree_cleanup (pattern);
+}
diff --git a/gdb/common/gdb_regex.h b/gdb/common/gdb_regex.h
new file mode 100644
index 0000000..85c9c72
--- /dev/null
+++ b/gdb/common/gdb_regex.h
@@ -0,0 +1,36 @@
+/* Portable <regex.h>.
+ Copyright (C) 2000-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef COMMON_GDB_REGEX_H
+#define COMMON_GDB_REGEX_H 1
+
+#ifdef USE_INCLUDED_REGEX
+# include "xregex.h"
+#else
+/* Request 4.2 BSD regex functions. */
+# define _REGEX_RE_COMP
+# include <regex.h>
+#endif
+
+/* From utils.c. */
+struct cleanup *make_regfree_cleanup (regex_t *);
+char *get_regcomp_error (int, regex_t *);
+struct cleanup *compile_rx_or_error (regex_t *pattern, const char *rx,
+ const char *message);
+
+#endif /* not COMMON_GDB_REGEX_H */
diff --git a/gdb/configure b/gdb/configure
index 5100921..02c865d 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -11427,6 +11427,57 @@ $as_echo "#define HAVE_SIGSETJMP 1" >>confdefs.h
fi
+ # Assume we'll default to using the included libiberty regex.
+ gdb_use_included_regex=yes
+
+ # However, if the system regex is GNU regex, then default to *not*
+ # using the included regex.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU regex" >&5
+$as_echo_n "checking for GNU regex... " >&6; }
+if test "${gdb_cv_have_gnu_regex+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <gnu-versions.h>
+int
+main ()
+{
+#define REGEX_INTERFACE_VERSION 1
+ #if _GNU_REGEX_INTERFACE_VERSION != REGEX_INTERFACE_VERSION
+ # error "Version mismatch"
+ #endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ gdb_cv_have_gnu_regex=yes
+else
+ gdb_cv_have_gnu_regex=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_have_gnu_regex" >&5
+$as_echo "$gdb_cv_have_gnu_regex" >&6; }
+ if test $gdb_cv_have_gnu_regex = yes; then
+ gdb_use_included_regex=no
+ fi
+
+
+# Check whether --with-included-regex was given.
+if test "${with_included_regex+set}" = set; then :
+ withval=$with_included_regex; gdb_with_regex=$withval
+else
+ gdb_with_regex=$gdb_use_included_regex
+fi
+
+ if test "$gdb_with_regex" = yes; then
+
+$as_echo "#define USE_INCLUDED_REGEX 1" >>confdefs.h
+
+ fi
+
# Check the return and argument types of ptrace. No canned test for
# this, so roll our own.
@@ -11689,57 +11740,6 @@ if test $ac_cv_func_setpgrp_void = yes; then
fi
fi
-# Assume we'll default to using the included libiberty regex.
-gdb_use_included_regex=yes
-
-# However, if the system regex is GNU regex, then default to *not*
-# using the included regex.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU regex" >&5
-$as_echo_n "checking for GNU regex... " >&6; }
-if test "${gdb_cv_have_gnu_regex+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <gnu-versions.h>
-int
-main ()
-{
-#define REGEX_INTERFACE_VERSION 1
-#if _GNU_REGEX_INTERFACE_VERSION != REGEX_INTERFACE_VERSION
-# error "Version mismatch"
-#endif
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- gdb_cv_have_gnu_regex=yes
-else
- gdb_cv_have_gnu_regex=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_have_gnu_regex" >&5
-$as_echo "$gdb_cv_have_gnu_regex" >&6; }
-if test $gdb_cv_have_gnu_regex = yes; then
- gdb_use_included_regex=no
-fi
-
-
-# Check whether --with-included-regex was given.
-if test "${with_included_regex+set}" = set; then :
- withval=$with_included_regex; gdb_with_regex=$withval
-else
- gdb_with_regex=$gdb_use_included_regex
-fi
-
-if test "$gdb_with_regex" = yes; then
-
-$as_echo "#define USE_INCLUDED_REGEX 1" >>confdefs.h
-
-fi
-
# Check if <sys/proc.h> defines `struct thread' with a td_pcb member.
ac_fn_c_check_member "$LINENO" "struct thread" "td_pcb" "ac_cv_member_struct_thread_td_pcb" "#include <sys/param.h>
#include <sys/proc.h>
diff --git a/gdb/configure.ac b/gdb/configure.ac
index 2035a37..07b412a 100644
--- a/gdb/configure.ac
+++ b/gdb/configure.ac
@@ -1424,35 +1424,6 @@ if test $ac_cv_func_setpgrp_void = yes; then
fi
fi
-# Assume we'll default to using the included libiberty regex.
-gdb_use_included_regex=yes
-
-# However, if the system regex is GNU regex, then default to *not*
-# using the included regex.
-AC_CACHE_CHECK(
- [for GNU regex],
- [gdb_cv_have_gnu_regex],
- [AC_TRY_COMPILE(
- [#include <gnu-versions.h>],
- [#define REGEX_INTERFACE_VERSION 1
-#if _GNU_REGEX_INTERFACE_VERSION != REGEX_INTERFACE_VERSION
-# error "Version mismatch"
-#endif],
- gdb_cv_have_gnu_regex=yes,
- gdb_cv_have_gnu_regex=no)])
-if test $gdb_cv_have_gnu_regex = yes; then
- gdb_use_included_regex=no
-fi
-
-AC_ARG_WITH(included-regex,
- AS_HELP_STRING([--without-included-regex], [don't use included regex; this is the default on systems with version 2 of the GNU C library (use with caution on other system)]),
- gdb_with_regex=$withval,
- gdb_with_regex=$gdb_use_included_regex)
-if test "$gdb_with_regex" = yes; then
- AC_DEFINE(USE_INCLUDED_REGEX, 1,
- [Define to 1 if the regex included in libiberty should be used.])
-fi
-
# Check if <sys/proc.h> defines `struct thread' with a td_pcb member.
AC_CHECK_MEMBERS([struct thread.td_pcb], [], [],
[#include <sys/param.h>
diff --git a/gdb/gdb_regex.h b/gdb/gdb_regex.h
deleted file mode 100644
index 3173a54..0000000
--- a/gdb/gdb_regex.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Portable <regex.h>.
- Copyright (C) 2000-2015 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef GDB_REGEX_H
-#define GDB_REGEX_H 1
-
-#ifdef USE_INCLUDED_REGEX
-# include "xregex.h"
-#else
-/* Request 4.2 BSD regex functions. */
-# define _REGEX_RE_COMP
-# include <regex.h>
-#endif
-
-/* From utils.c. */
-struct cleanup *make_regfree_cleanup (regex_t *);
-char *get_regcomp_error (int, regex_t *);
-struct cleanup *compile_rx_or_error (regex_t *pattern, const char *rx,
- const char *message);
-
-#endif /* not GDB_REGEX_H */
diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in
index 908061a..fea8e1b 100644
--- a/gdb/gdbserver/Makefile.in
+++ b/gdb/gdbserver/Makefile.in
@@ -195,6 +195,7 @@ OBS = agent.o ax.o inferiors.o regcache.o remote-utils.o server.o signals.o \
common-utils.o ptid.o buffer.o format.o filestuff.o dll.o notif.o \
tdesc.o print-utils.o rsp-low.o errors.o common-debug.o cleanups.o \
common-exceptions.o symbol.o btrace-common.o fileio.o target-utils.o \
+ gdb_regex.o \
$(XML_BUILTIN) $(DEPFILES) $(LIBOBJS)
GDBREPLAY_OBS = gdbreplay.o version.o
GDBSERVER_LIBS = @GDBSERVER_LIBS@
@@ -582,6 +583,9 @@ waitstatus.o: ../target/waitstatus.c
fileio.o: ../common/fileio.c
$(COMPILE) $<
$(POSTCOMPILE)
+gdb_regex.o: ../common/gdb_regex.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
# Native object files rules from ../nat
diff --git a/gdb/gdbserver/config.in b/gdb/gdbserver/config.in
index f24e6bb..90ea95d 100644
--- a/gdb/gdbserver/config.in
+++ b/gdb/gdbserver/config.in
@@ -317,6 +317,9 @@
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
+/* Define to 1 if the regex included in libiberty should be used. */
+#undef USE_INCLUDED_REGEX
+
/* Define if we should use libthread_db directly. */
#undef USE_LIBTHREAD_DB_DIRECTLY
diff --git a/gdb/gdbserver/configure b/gdb/gdbserver/configure
index e8cf136..c7ae6be 100755
--- a/gdb/gdbserver/configure
+++ b/gdb/gdbserver/configure
@@ -694,6 +694,7 @@ enable_maintainer_mode
enable_largefile
enable_build_with_cxx
enable_libmcheck
+with_included_regex
with_ust
with_ust_include
with_ust_lib
@@ -1345,6 +1346,10 @@ Optional Features:
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --without-included-regex
+ don't use included regex; this is the default on
+ systems with version 2 of the GNU C library (use
+ with caution on other system)
--with-ust=PATH Specify prefix directory for the installed UST package
Equivalent to --with-ust-include=PATH/include
plus --with-ust-lib=PATH/lib
@@ -5747,6 +5752,57 @@ $as_echo "#define HAVE_SIGSETJMP 1" >>confdefs.h
fi
+ # Assume we'll default to using the included libiberty regex.
+ gdb_use_included_regex=yes
+
+ # However, if the system regex is GNU regex, then default to *not*
+ # using the included regex.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU regex" >&5
+$as_echo_n "checking for GNU regex... " >&6; }
+if test "${gdb_cv_have_gnu_regex+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <gnu-versions.h>
+int
+main ()
+{
+#define REGEX_INTERFACE_VERSION 1
+ #if _GNU_REGEX_INTERFACE_VERSION != REGEX_INTERFACE_VERSION
+ # error "Version mismatch"
+ #endif
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ gdb_cv_have_gnu_regex=yes
+else
+ gdb_cv_have_gnu_regex=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_have_gnu_regex" >&5
+$as_echo "$gdb_cv_have_gnu_regex" >&6; }
+ if test $gdb_cv_have_gnu_regex = yes; then
+ gdb_use_included_regex=no
+ fi
+
+
+# Check whether --with-included-regex was given.
+if test "${with_included_regex+set}" = set; then :
+ withval=$with_included_regex; gdb_with_regex=$withval
+else
+ gdb_with_regex=$gdb_use_included_regex
+fi
+
+ if test "$gdb_with_regex" = yes; then
+
+$as_echo "#define USE_INCLUDED_REGEX 1" >>confdefs.h
+
+ fi
+
# Check for UST
ustlibs=""
diff --git a/gdb/utils.c b/gdb/utils.c
index acb4c7d..a2c2710 100644
--- a/gdb/utils.c
+++ b/gdb/utils.c
@@ -67,7 +67,6 @@
#include "gdb_usleep.h"
#include "interps.h"
-#include "gdb_regex.h"
#if !HAVE_DECL_MALLOC
extern PTR malloc (); /* ARI: PTR */
@@ -1114,60 +1113,6 @@ make_hex_string (const gdb_byte *data, size_t length)
\f
-/* A cleanup function that calls regfree. */
-
-static void
-do_regfree_cleanup (void *r)
-{
- regfree (r);
-}
-
-/* Create a new cleanup that frees the compiled regular expression R. */
-
-struct cleanup *
-make_regfree_cleanup (regex_t *r)
-{
- return make_cleanup (do_regfree_cleanup, r);
-}
-
-/* Return an xmalloc'd error message resulting from a regular
- expression compilation failure. */
-
-char *
-get_regcomp_error (int code, regex_t *rx)
-{
- size_t length = regerror (code, rx, NULL, 0);
- char *result = xmalloc (length);
-
- regerror (code, rx, result, length);
- return result;
-}
-
-/* Compile a regexp and throw an exception on error. This returns a
- cleanup to free the resulting pattern on success. RX must not be
- NULL. */
-
-struct cleanup *
-compile_rx_or_error (regex_t *pattern, const char *rx, const char *message)
-{
- int code;
-
- gdb_assert (rx != NULL);
-
- code = regcomp (pattern, rx, REG_NOSUB);
- if (code != 0)
- {
- char *err = get_regcomp_error (code, pattern);
-
- make_cleanup (xfree, err);
- error (("%s: %s"), message, err);
- }
-
- return make_regfree_cleanup (pattern);
-}
-
-\f
-
/* This function supports the query, nquery, and yquery functions.
Ask user a y-or-n question and return 0 if answer is no, 1 if
answer is yes, or default the answer to the specified default
next prev parent reply other threads:[~2015-06-14 19:26 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-14 19:25 [PATCH v7 00/10] Validate binary before use Jan Kratochvil
2015-06-14 19:25 ` [PATCH v7 01/10] Move utility functions to common/ Jan Kratochvil
2015-06-15 13:22 ` Joel Brobecker
2015-06-15 15:07 ` [commit] " Jan Kratochvil
2015-06-14 19:26 ` [PATCH v7 07/10] Move linux_find_memory_regions_full & co Jan Kratochvil
2015-06-14 19:26 ` [PATCH v7 03/10] Code cleanup: Rename enum -> enum filterflags Jan Kratochvil
2015-06-15 13:34 ` Joel Brobecker
2015-06-15 15:12 ` [commit] " Jan Kratochvil
2015-07-08 14:38 ` Pedro Alves
2015-06-14 19:26 ` [PATCH v7 06/10] Prepare linux_find_memory_regions_full & co. for move Jan Kratochvil
2015-06-14 19:26 ` [PATCH v7 02/10] Merge multiple hex conversions Jan Kratochvil
2015-06-15 13:33 ` Joel Brobecker
2015-06-15 15:09 ` [commit] " Jan Kratochvil
2015-06-14 19:26 ` [PATCH v7 04/10] Create empty nat/linux-maps.[ch] and common/target-utils.[ch] Jan Kratochvil
2015-06-14 19:26 ` Jan Kratochvil [this message]
2015-07-08 14:39 ` [PATCH v7 05/10] Move gdb_regex* to common/ Pedro Alves
2015-07-14 20:13 ` Jan Kratochvil
2015-06-14 19:27 ` [PATCH v7 10/10] Tests for validate symbol file using build-id Jan Kratochvil
2015-07-08 14:44 ` Pedro Alves
2015-06-14 19:27 ` [PATCH v7 08/10] gdbserver build-id attribute generator Jan Kratochvil
2015-07-08 14:41 ` Pedro Alves
2015-06-14 19:27 ` [PATCH v7 09/10] Validate symbol file using build-id Jan Kratochvil
2015-06-21 10:16 ` [PATCH v8 " Jan Kratochvil
2015-06-22 12:55 ` Aleksandar Ristovski
2015-06-22 20:37 ` Jan Kratochvil
2015-06-22 20:41 ` Aleksandar Ristovski
2015-06-22 22:25 ` Doug Evans
2015-06-23 20:47 ` Jan Kratochvil
2015-07-08 14:44 ` Pedro Alves
2015-07-12 19:09 ` Jan Kratochvil
2015-07-12 19:29 ` [PATCH v9 " Jan Kratochvil
2015-07-12 19:54 ` Eli Zaretskii
2015-07-12 20:01 ` Jan Kratochvil
2015-07-13 2:30 ` Eli Zaretskii
2015-07-13 10:34 ` Pedro Alves
2015-07-13 12:38 ` Jan Kratochvil
2015-07-14 16:14 ` Doug Evans
2015-07-15 8:21 ` Jan Kratochvil
2015-07-15 14:59 ` Doug Evans
2015-06-27 21:05 ` [PATCH v8 " Jan Kratochvil
2015-07-08 15:40 ` Doug Evans
2015-07-12 19:27 ` Jan Kratochvil
2015-07-15 16:36 ` [commit] [PATCH v7 00/10] Validate binary before use Jan Kratochvil
2015-07-15 18:33 ` [revert] " Jan Kratochvil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150614192621.18346.73242.stgit@host1.jankratochvil.net \
--to=jan.kratochvil@redhat.com \
--cc=ARistovski@qnx.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).