[PATCH v5 0/1] gdb, infcmd: Support jump command with same line in multiple symtabs

[PATCH v5 0/1] gdb, infcmd: Support jump command with same line in multiple symtabs

[Matti Puputti]

This pach addresses comments from Eli. Both the text in documentation and
the error message are updated with his proposals.

Patch 4:
https://sourceware.org/pipermail/gdb-patches/2023-May/199464.html
Andrew's approval on patch 4:
https://sourceware.org/pipermail/gdb-patches/2023-May/199471.html
Eli's comments on patch 4:
https://sourceware.org/pipermail/gdb-patches/2023-May/199467.html

Matti Puputti (1):
  gdb, infcmd: Support jump command with same line in multiple symtabs

 gdb/doc/gdb.texinfo                           |  4 +-
 gdb/infcmd.c                                  | 14 ++++-
 .../gdb.base/jump_multiple_objfiles-foo.c     | 24 +++++++++
 .../gdb.base/jump_multiple_objfiles.c         | 30 +++++++++++
 .../gdb.base/jump_multiple_objfiles.exp       | 54 +++++++++++++++++++
 .../gdb.base/jump_multiple_objfiles.h         | 30 +++++++++++
 6 files changed, 154 insertions(+), 2 deletions(-)
 create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
 create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.c
 create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
 create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.h

-- 
2.25.1

Intel Deutschland GmbH
Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva  
Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928

[PATCH v5 1/1] gdb, infcmd: Support jump command with same line in multiple symtabs

[Matti Puputti]

If a header file defining a static function is included in multiple source
files, each calling the function, and GDB is asked to jump to a line inside
that function, there would be multiple locations matching the target.  The
solution in this commit is to select the location in the current symtab.
---
 gdb/doc/gdb.texinfo                           |  4 +-
 gdb/infcmd.c                                  | 14 ++++-
 .../gdb.base/jump_multiple_objfiles-foo.c     | 24 +++++++++
 .../gdb.base/jump_multiple_objfiles.c         | 30 +++++++++++
 .../gdb.base/jump_multiple_objfiles.exp       | 54 +++++++++++++++++++
 .../gdb.base/jump_multiple_objfiles.h         | 30 +++++++++++
 6 files changed, 154 insertions(+), 2 deletions(-)
 create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
 create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.c
 create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
 create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.h

diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 531147f6e6b..e43a71a7bbb 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -20587,7 +20587,9 @@ an address of your own choosing, with the following commands:
 Resume execution at the address of the code location that results from
 resolving @var{locspec}.
 @xref{Location Specifications}, for a description of the different
-forms of @var{locspec}.  If @var{locspec} resolves to more than one
+forms of @var{locspec}.  If @var{locspec} resolves to more than one address,
+those outside the current compilation unit are ignored.  If considering just
+the addresses in the current compilation unit still doesn't yield a unique
 address, the command aborts before jumping.
 Execution stops again immediately if there is a breakpoint there.  It
 is common practice to use the @code{tbreak} command in conjunction
diff --git a/gdb/infcmd.c b/gdb/infcmd.c
index b12b58db9cb..15702f84894 100644
--- a/gdb/infcmd.c
+++ b/gdb/infcmd.c
@@ -1070,7 +1070,19 @@ jump_command (const char *arg, int from_tty)
   std::vector<symtab_and_line> sals
     = decode_line_with_last_displayed (arg, DECODE_LINE_FUNFIRSTLINE);
   if (sals.size () != 1)
-    error (_("Unreasonable jump request"));
+    {
+      /* If multiple sal-objects were found, try dropping those that aren't
+	 from the current symtab.  */
+      struct symtab_and_line cursal = get_current_source_symtab_and_line ();
+      sals.erase (std::remove_if (sals.begin (), sals.end (),
+		  [&] (const symtab_and_line &sal)
+		    {
+		      return sal.symtab != cursal.symtab;
+		    }), sals.end ());
+      if (sals.size () != 1)
+	error (_("Jump request is ambiguous: "
+		 "does not resolve to a single address"));
+    }
 
   symtab_and_line &sal = sals[0];
 
diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c b/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
new file mode 100755
index 00000000000..16863c8594b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
@@ -0,0 +1,24 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+   Copyright 2021-2023 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "jump_multiple_objfiles.h"
+
+int
+foo (int n)
+{
+  return bar (n);
+}
diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.c b/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
new file mode 100755
index 00000000000..b54eede9eb1
--- /dev/null
+++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
@@ -0,0 +1,30 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+   Copyright 2021-2023 Free Software Foundation, Inc.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include "jump_multiple_objfiles.h"
+
+extern int foo (int n);
+
+
+int
+main ()
+{
+  int n = foo (1);
+  bar (n);
+
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp b/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
new file mode 100755
index 00000000000..b178e60150e
--- /dev/null
+++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
@@ -0,0 +1,54 @@
+#   Copyright 2021-2023 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+#
+# Tests GDBs support for jump, when the source line is in multiple
+# object files.
+
+
+standard_testfile .c -foo.c .h
+
+
+if { [prepare_for_testing "failed to prepare" $testfile \
+      [list ${srcfile} ${srcfile2}]] } {
+    return -1
+}
+
+if { ![runto_main] } {
+    return -1
+}
+
+
+set bar_first_line [gdb_get_line_number "bar-first-line" ${srcfile3}]
+set bar_middle_line [gdb_get_line_number "bar-middle-line" ${srcfile3}]
+set bar_last_line [gdb_get_line_number "bar-last-line" ${srcfile3}]
+
+
+# Set breakpoints in the function bar.  Executable has two object files,
+# and both have a copy of the same source lines.  Therefore breakpoints
+# will have two locations.
+gdb_breakpoint "${srcfile3}:${bar_first_line}"
+gdb_breakpoint "${srcfile3}:${bar_last_line}"
+
+# Run to the breakpoint in bar.
+gdb_continue_to_breakpoint "bar_first_line" \
+    ".*${srcfile3}:${bar_first_line}.*"
+
+# Jump within the function.  Debugger shall be able to jump, even if the
+# target line is in two different object files.  After jump, we will hit
+# the breakpoint at the last line of bar.
+gdb_test "jump ${bar_middle_line}"  [multi_line \
+    "Continuing at ($hex).*" \
+    "Breakpoint ${decimal}.* at .*${srcfile3}:${bar_last_line}.*"] \
+    "Jump within the objectfile"
diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.h b/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
new file mode 100755
index 00000000000..0a3815e1808
--- /dev/null
+++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
@@ -0,0 +1,30 @@
+/* Copyright (C) 2021-2023 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef JUMP_MULTIPLE_OBJFILES_H
+#define JUMP_MULTIPLE_OBJFILES_H
+
+static int
+bar (int n)
+{
+  int retval = n;
+  retval += 1;      /* bar-first-line */
+  retval *= -1;     /* bar-middle-line */
+  return retval;    /* bar-last-line */
+}
+
+#endif /* JUMP_MULTIPLE_OBJFILES_H */
-- 
2.25.1

Intel Deutschland GmbH
Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva  
Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928

Re: [PATCH v5 1/1] gdb, infcmd: Support jump command with same line in multiple symtabs

[Eli Zaretskii]

> From: Matti Puputti <matti.puputti@intel.com>
> Cc: eliz@gnu.org,
> 	aburgess@redhat.com
> Date: Fri, 12 May 2023 15:33:20 +0200
> 
> If a header file defining a static function is included in multiple source
> files, each calling the function, and GDB is asked to jump to a line inside
> that function, there would be multiple locations matching the target.  The
> solution in this commit is to select the location in the current symtab.
> ---
>  gdb/doc/gdb.texinfo                           |  4 +-
>  gdb/infcmd.c                                  | 14 ++++-
>  .../gdb.base/jump_multiple_objfiles-foo.c     | 24 +++++++++
>  .../gdb.base/jump_multiple_objfiles.c         | 30 +++++++++++
>  .../gdb.base/jump_multiple_objfiles.exp       | 54 +++++++++++++++++++
>  .../gdb.base/jump_multiple_objfiles.h         | 30 +++++++++++
>  6 files changed, 154 insertions(+), 2 deletions(-)
>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.h

Thanks, the documentation part of this is OK.

Reviewed-By: Eli Zaretskii <eliz@gnu.org>

RE: [PATCH v5 1/1] gdb, infcmd: Support jump command with same line in multiple symtabs

[Puputti, Matti]

Hi Andrew,

Thank you for the review.
Please note that the Patch 5 makes one more change in the code, by  changing the error message ("Unreasonable jump request" -> "Jump request is ambiguous: does not resolve to a single address").

If you are ok with the new error message, and since Eli seems to be ok with the documentation, I think we are ready to push.
I don't yet have rights to push.
Can you please push this commit for me?

Br,
Matti Puputti 

> -----Original Message-----
> From: Eli Zaretskii <eliz@gnu.org>
> Sent: Friday, May 12, 2023 4:38 PM
> To: Puputti, Matti <matti.puputti@intel.com>
> Cc: gdb-patches@sourceware.org; aburgess@redhat.com
> Subject: Re: [PATCH v5 1/1] gdb, infcmd: Support jump command with same
> line in multiple symtabs
> 
> > From: Matti Puputti <matti.puputti@intel.com>
> > Cc: eliz@gnu.org,
> > 	aburgess@redhat.com
> > Date: Fri, 12 May 2023 15:33:20 +0200
> >
> > If a header file defining a static function is included in multiple source
> > files, each calling the function, and GDB is asked to jump to a line inside
> > that function, there would be multiple locations matching the target.  The
> > solution in this commit is to select the location in the current symtab.
> > ---
> >  gdb/doc/gdb.texinfo                           |  4 +-
> >  gdb/infcmd.c                                  | 14 ++++-
> >  .../gdb.base/jump_multiple_objfiles-foo.c     | 24 +++++++++
> >  .../gdb.base/jump_multiple_objfiles.c         | 30 +++++++++++
> >  .../gdb.base/jump_multiple_objfiles.exp       | 54 +++++++++++++++++++
> >  .../gdb.base/jump_multiple_objfiles.h         | 30 +++++++++++
> >  6 files changed, 154 insertions(+), 2 deletions(-)
> >  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
> >  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.c
> >  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
> >  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.h
> 
> Thanks, the documentation part of this is OK.
> 
> Reviewed-By: Eli Zaretskii <eliz@gnu.org>
Intel Deutschland GmbH
Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva  
Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928

RE: [PING][PATCH v5 1/1] gdb, infcmd: Support jump command with same line in multiple symtabs

[Puputti, Matti]

Kindly asking for review, approval and help to push.


Patch 4:	https://sourceware.org/pipermail/gdb-patches/2023-May/199464.html
Andrew's comments on patch 4:	https://sourceware.org/pipermail/gdb-patches/2023-May/199471.html
Eli's comments on patch 4:	https://sourceware.org/pipermail/gdb-patches/2023-May/199467.html
Patch 5:	https://sourceware.org/pipermail/gdb-patches/2023-May/199540.html
Eli’s ok on path 5:	https://sourceware.org/pipermail/gdb-patches/2023-May/199544.html
My msg to Andrew:	https://sourceware.org/pipermail/gdb-patches/2023-May/199570.html

Br,
Matti Puputti


> -----Original Message-----
> From: Gdb-patches <gdb-patches-
> bounces+matti.puputti=intel.com@sourceware.org> On Behalf Of Matti
> Puputti via Gdb-patches
> Sent: Friday, May 12, 2023 3:33 PM
> To: gdb-patches@sourceware.org
> Cc: eliz@gnu.org; aburgess@redhat.com
> Subject: [PATCH v5 1/1] gdb, infcmd: Support jump command with same line
> in multiple symtabs
> 
> If a header file defining a static function is included in multiple source
> files, each calling the function, and GDB is asked to jump to a line inside
> that function, there would be multiple locations matching the target.  The
> solution in this commit is to select the location in the current symtab.
> ---
>  gdb/doc/gdb.texinfo                           |  4 +-
>  gdb/infcmd.c                                  | 14 ++++-
>  .../gdb.base/jump_multiple_objfiles-foo.c     | 24 +++++++++
>  .../gdb.base/jump_multiple_objfiles.c         | 30 +++++++++++
>  .../gdb.base/jump_multiple_objfiles.exp       | 54 +++++++++++++++++++
>  .../gdb.base/jump_multiple_objfiles.h         | 30 +++++++++++
>  6 files changed, 154 insertions(+), 2 deletions(-)
>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.h
> 
> diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
> index 531147f6e6b..e43a71a7bbb 100644
> --- a/gdb/doc/gdb.texinfo
> +++ b/gdb/doc/gdb.texinfo
> @@ -20587,7 +20587,9 @@ an address of your own choosing, with the
> following commands:
>  Resume execution at the address of the code location that results from
>  resolving @var{locspec}.
>  @xref{Location Specifications}, for a description of the different
> -forms of @var{locspec}.  If @var{locspec} resolves to more than one
> +forms of @var{locspec}.  If @var{locspec} resolves to more than one
> address,
> +those outside the current compilation unit are ignored.  If considering just
> +the addresses in the current compilation unit still doesn't yield a unique
>  address, the command aborts before jumping.
>  Execution stops again immediately if there is a breakpoint there.  It
>  is common practice to use the @code{tbreak} command in conjunction
> diff --git a/gdb/infcmd.c b/gdb/infcmd.c
> index b12b58db9cb..15702f84894 100644
> --- a/gdb/infcmd.c
> +++ b/gdb/infcmd.c
> @@ -1070,7 +1070,19 @@ jump_command (const char *arg, int from_tty)
>    std::vector<symtab_and_line> sals
>      = decode_line_with_last_displayed (arg, DECODE_LINE_FUNFIRSTLINE);
>    if (sals.size () != 1)
> -    error (_("Unreasonable jump request"));
> +    {
> +      /* If multiple sal-objects were found, try dropping those that aren't
> +	 from the current symtab.  */
> +      struct symtab_and_line cursal = get_current_source_symtab_and_line
> ();
> +      sals.erase (std::remove_if (sals.begin (), sals.end (),
> +		  [&] (const symtab_and_line &sal)
> +		    {
> +		      return sal.symtab != cursal.symtab;
> +		    }), sals.end ());
> +      if (sals.size () != 1)
> +	error (_("Jump request is ambiguous: "
> +		 "does not resolve to a single address"));
> +    }
> 
>    symtab_and_line &sal = sals[0];
> 
> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
> b/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
> new file mode 100755
> index 00000000000..16863c8594b
> --- /dev/null
> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
> @@ -0,0 +1,24 @@
> +/* This testcase is part of GDB, the GNU debugger.
> +
> +   Copyright 2021-2023 Free Software Foundation, Inc.
> +
> +   This program is free software; you can redistribute it and/or modify
> +   it under the terms of the GNU General Public License as published by
> +   the Free Software Foundation; either version 3 of the License, or
> +   (at your option) any later version.
> +
> +   This program is distributed in the hope that it will be useful,
> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +   GNU General Public License for more details.
> +
> +   You should have received a copy of the GNU General Public License
> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
> +
> +#include "jump_multiple_objfiles.h"
> +
> +int
> +foo (int n)
> +{
> +  return bar (n);
> +}
> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
> b/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
> new file mode 100755
> index 00000000000..b54eede9eb1
> --- /dev/null
> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
> @@ -0,0 +1,30 @@
> +/* This testcase is part of GDB, the GNU debugger.
> +
> +   Copyright 2021-2023 Free Software Foundation, Inc.
> +
> +   This program is free software; you can redistribute it and/or modify
> +   it under the terms of the GNU General Public License as published by
> +   the Free Software Foundation; either version 3 of the License, or
> +   (at your option) any later version.
> +
> +   This program is distributed in the hope that it will be useful,
> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +   GNU General Public License for more details.
> +
> +   You should have received a copy of the GNU General Public License
> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
> +
> +#include "jump_multiple_objfiles.h"
> +
> +extern int foo (int n);
> +
> +
> +int
> +main ()
> +{
> +  int n = foo (1);
> +  bar (n);
> +
> +  return 0;
> +}
> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
> b/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
> new file mode 100755
> index 00000000000..b178e60150e
> --- /dev/null
> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
> @@ -0,0 +1,54 @@
> +#   Copyright 2021-2023 Free Software Foundation, Inc.
> +
> +# This program is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation; either version 3 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
> +#
> +# Tests GDBs support for jump, when the source line is in multiple
> +# object files.
> +
> +
> +standard_testfile .c -foo.c .h
> +
> +
> +if { [prepare_for_testing "failed to prepare" $testfile \
> +      [list ${srcfile} ${srcfile2}]] } {
> +    return -1
> +}
> +
> +if { ![runto_main] } {
> +    return -1
> +}
> +
> +
> +set bar_first_line [gdb_get_line_number "bar-first-line" ${srcfile3}]
> +set bar_middle_line [gdb_get_line_number "bar-middle-line" ${srcfile3}]
> +set bar_last_line [gdb_get_line_number "bar-last-line" ${srcfile3}]
> +
> +
> +# Set breakpoints in the function bar.  Executable has two object files,
> +# and both have a copy of the same source lines.  Therefore breakpoints
> +# will have two locations.
> +gdb_breakpoint "${srcfile3}:${bar_first_line}"
> +gdb_breakpoint "${srcfile3}:${bar_last_line}"
> +
> +# Run to the breakpoint in bar.
> +gdb_continue_to_breakpoint "bar_first_line" \
> +    ".*${srcfile3}:${bar_first_line}.*"
> +
> +# Jump within the function.  Debugger shall be able to jump, even if the
> +# target line is in two different object files.  After jump, we will hit
> +# the breakpoint at the last line of bar.
> +gdb_test "jump ${bar_middle_line}"  [multi_line \
> +    "Continuing at ($hex).*" \
> +    "Breakpoint ${decimal}.* at .*${srcfile3}:${bar_last_line}.*"] \
> +    "Jump within the objectfile"
> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
> b/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
> new file mode 100755
> index 00000000000..0a3815e1808
> --- /dev/null
> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
> @@ -0,0 +1,30 @@
> +/* Copyright (C) 2021-2023 Free Software Foundation, Inc.
> +
> +   This file is part of GDB.
> +
> +   This program is free software; you can redistribute it and/or modify
> +   it under the terms of the GNU General Public License as published by
> +   the Free Software Foundation; either version 3 of the License, or
> +   (at your option) any later version.
> +
> +   This program is distributed in the hope that it will be useful,
> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +   GNU General Public License for more details.
> +
> +   You should have received a copy of the GNU General Public License
> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
> +
> +#ifndef JUMP_MULTIPLE_OBJFILES_H
> +#define JUMP_MULTIPLE_OBJFILES_H
> +
> +static int
> +bar (int n)
> +{
> +  int retval = n;
> +  retval += 1;      /* bar-first-line */
> +  retval *= -1;     /* bar-middle-line */
> +  return retval;    /* bar-last-line */
> +}
> +
> +#endif /* JUMP_MULTIPLE_OBJFILES_H */
> --
> 2.25.1
> 
> Intel Deutschland GmbH
> Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
> Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
> Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva
> Chairperson of the Supervisory Board: Nicole Lau
> Registered Office: Munich
> Commercial Register: Amtsgericht Muenchen HRB 186928

Intel Deutschland GmbH
Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva  
Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928

RE: [PING][PATCH v5 1/1] gdb, infcmd: Support jump command with same line in multiple symtabs

[Andrew Burgess]

"Puputti, Matti" <matti.puputti@intel.com> writes:

> Kindly asking for review, approval and help to push.

I'm just running a regression test, and then I'll push this later today.

Thanks for your work on this,
Andrew


>
>
> Patch 4:	https://sourceware.org/pipermail/gdb-patches/2023-May/199464.html
> Andrew's comments on patch 4:	https://sourceware.org/pipermail/gdb-patches/2023-May/199471.html
> Eli's comments on patch 4:	https://sourceware.org/pipermail/gdb-patches/2023-May/199467.html
> Patch 5:	https://sourceware.org/pipermail/gdb-patches/2023-May/199540.html
> Eli’s ok on path 5:	https://sourceware.org/pipermail/gdb-patches/2023-May/199544.html
> My msg to Andrew:	https://sourceware.org/pipermail/gdb-patches/2023-May/199570.html
>
> Br,
> Matti Puputti
>
>
>> -----Original Message-----
>> From: Gdb-patches <gdb-patches-
>> bounces+matti.puputti=intel.com@sourceware.org> On Behalf Of Matti
>> Puputti via Gdb-patches
>> Sent: Friday, May 12, 2023 3:33 PM
>> To: gdb-patches@sourceware.org
>> Cc: eliz@gnu.org; aburgess@redhat.com
>> Subject: [PATCH v5 1/1] gdb, infcmd: Support jump command with same line
>> in multiple symtabs
>> 
>> If a header file defining a static function is included in multiple source
>> files, each calling the function, and GDB is asked to jump to a line inside
>> that function, there would be multiple locations matching the target.  The
>> solution in this commit is to select the location in the current symtab.
>> ---
>>  gdb/doc/gdb.texinfo                           |  4 +-
>>  gdb/infcmd.c                                  | 14 ++++-
>>  .../gdb.base/jump_multiple_objfiles-foo.c     | 24 +++++++++
>>  .../gdb.base/jump_multiple_objfiles.c         | 30 +++++++++++
>>  .../gdb.base/jump_multiple_objfiles.exp       | 54 +++++++++++++++++++
>>  .../gdb.base/jump_multiple_objfiles.h         | 30 +++++++++++
>>  6 files changed, 154 insertions(+), 2 deletions(-)
>>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.h
>> 
>> diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
>> index 531147f6e6b..e43a71a7bbb 100644
>> --- a/gdb/doc/gdb.texinfo
>> +++ b/gdb/doc/gdb.texinfo
>> @@ -20587,7 +20587,9 @@ an address of your own choosing, with the
>> following commands:
>>  Resume execution at the address of the code location that results from
>>  resolving @var{locspec}.
>>  @xref{Location Specifications}, for a description of the different
>> -forms of @var{locspec}.  If @var{locspec} resolves to more than one
>> +forms of @var{locspec}.  If @var{locspec} resolves to more than one
>> address,
>> +those outside the current compilation unit are ignored.  If considering just
>> +the addresses in the current compilation unit still doesn't yield a unique
>>  address, the command aborts before jumping.
>>  Execution stops again immediately if there is a breakpoint there.  It
>>  is common practice to use the @code{tbreak} command in conjunction
>> diff --git a/gdb/infcmd.c b/gdb/infcmd.c
>> index b12b58db9cb..15702f84894 100644
>> --- a/gdb/infcmd.c
>> +++ b/gdb/infcmd.c
>> @@ -1070,7 +1070,19 @@ jump_command (const char *arg, int from_tty)
>>    std::vector<symtab_and_line> sals
>>      = decode_line_with_last_displayed (arg, DECODE_LINE_FUNFIRSTLINE);
>>    if (sals.size () != 1)
>> -    error (_("Unreasonable jump request"));
>> +    {
>> +      /* If multiple sal-objects were found, try dropping those that aren't
>> +	 from the current symtab.  */
>> +      struct symtab_and_line cursal = get_current_source_symtab_and_line
>> ();
>> +      sals.erase (std::remove_if (sals.begin (), sals.end (),
>> +		  [&] (const symtab_and_line &sal)
>> +		    {
>> +		      return sal.symtab != cursal.symtab;
>> +		    }), sals.end ());
>> +      if (sals.size () != 1)
>> +	error (_("Jump request is ambiguous: "
>> +		 "does not resolve to a single address"));
>> +    }
>> 
>>    symtab_and_line &sal = sals[0];
>> 
>> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>> b/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>> new file mode 100755
>> index 00000000000..16863c8594b
>> --- /dev/null
>> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>> @@ -0,0 +1,24 @@
>> +/* This testcase is part of GDB, the GNU debugger.
>> +
>> +   Copyright 2021-2023 Free Software Foundation, Inc.
>> +
>> +   This program is free software; you can redistribute it and/or modify
>> +   it under the terms of the GNU General Public License as published by
>> +   the Free Software Foundation; either version 3 of the License, or
>> +   (at your option) any later version.
>> +
>> +   This program is distributed in the hope that it will be useful,
>> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +   GNU General Public License for more details.
>> +
>> +   You should have received a copy of the GNU General Public License
>> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
>> +
>> +#include "jump_multiple_objfiles.h"
>> +
>> +int
>> +foo (int n)
>> +{
>> +  return bar (n);
>> +}
>> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>> b/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>> new file mode 100755
>> index 00000000000..b54eede9eb1
>> --- /dev/null
>> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>> @@ -0,0 +1,30 @@
>> +/* This testcase is part of GDB, the GNU debugger.
>> +
>> +   Copyright 2021-2023 Free Software Foundation, Inc.
>> +
>> +   This program is free software; you can redistribute it and/or modify
>> +   it under the terms of the GNU General Public License as published by
>> +   the Free Software Foundation; either version 3 of the License, or
>> +   (at your option) any later version.
>> +
>> +   This program is distributed in the hope that it will be useful,
>> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +   GNU General Public License for more details.
>> +
>> +   You should have received a copy of the GNU General Public License
>> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
>> +
>> +#include "jump_multiple_objfiles.h"
>> +
>> +extern int foo (int n);
>> +
>> +
>> +int
>> +main ()
>> +{
>> +  int n = foo (1);
>> +  bar (n);
>> +
>> +  return 0;
>> +}
>> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>> b/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>> new file mode 100755
>> index 00000000000..b178e60150e
>> --- /dev/null
>> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>> @@ -0,0 +1,54 @@
>> +#   Copyright 2021-2023 Free Software Foundation, Inc.
>> +
>> +# This program is free software; you can redistribute it and/or modify
>> +# it under the terms of the GNU General Public License as published by
>> +# the Free Software Foundation; either version 3 of the License, or
>> +# (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
>> +#
>> +# Tests GDBs support for jump, when the source line is in multiple
>> +# object files.
>> +
>> +
>> +standard_testfile .c -foo.c .h
>> +
>> +
>> +if { [prepare_for_testing "failed to prepare" $testfile \
>> +      [list ${srcfile} ${srcfile2}]] } {
>> +    return -1
>> +}
>> +
>> +if { ![runto_main] } {
>> +    return -1
>> +}
>> +
>> +
>> +set bar_first_line [gdb_get_line_number "bar-first-line" ${srcfile3}]
>> +set bar_middle_line [gdb_get_line_number "bar-middle-line" ${srcfile3}]
>> +set bar_last_line [gdb_get_line_number "bar-last-line" ${srcfile3}]
>> +
>> +
>> +# Set breakpoints in the function bar.  Executable has two object files,
>> +# and both have a copy of the same source lines.  Therefore breakpoints
>> +# will have two locations.
>> +gdb_breakpoint "${srcfile3}:${bar_first_line}"
>> +gdb_breakpoint "${srcfile3}:${bar_last_line}"
>> +
>> +# Run to the breakpoint in bar.
>> +gdb_continue_to_breakpoint "bar_first_line" \
>> +    ".*${srcfile3}:${bar_first_line}.*"
>> +
>> +# Jump within the function.  Debugger shall be able to jump, even if the
>> +# target line is in two different object files.  After jump, we will hit
>> +# the breakpoint at the last line of bar.
>> +gdb_test "jump ${bar_middle_line}"  [multi_line \
>> +    "Continuing at ($hex).*" \
>> +    "Breakpoint ${decimal}.* at .*${srcfile3}:${bar_last_line}.*"] \
>> +    "Jump within the objectfile"
>> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
>> b/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
>> new file mode 100755
>> index 00000000000..0a3815e1808
>> --- /dev/null
>> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
>> @@ -0,0 +1,30 @@
>> +/* Copyright (C) 2021-2023 Free Software Foundation, Inc.
>> +
>> +   This file is part of GDB.
>> +
>> +   This program is free software; you can redistribute it and/or modify
>> +   it under the terms of the GNU General Public License as published by
>> +   the Free Software Foundation; either version 3 of the License, or
>> +   (at your option) any later version.
>> +
>> +   This program is distributed in the hope that it will be useful,
>> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +   GNU General Public License for more details.
>> +
>> +   You should have received a copy of the GNU General Public License
>> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
>> +
>> +#ifndef JUMP_MULTIPLE_OBJFILES_H
>> +#define JUMP_MULTIPLE_OBJFILES_H
>> +
>> +static int
>> +bar (int n)
>> +{
>> +  int retval = n;
>> +  retval += 1;      /* bar-first-line */
>> +  retval *= -1;     /* bar-middle-line */
>> +  return retval;    /* bar-last-line */
>> +}
>> +
>> +#endif /* JUMP_MULTIPLE_OBJFILES_H */
>> --
>> 2.25.1
>> 
>> Intel Deutschland GmbH
>> Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
>> Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
>> Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva
>> Chairperson of the Supervisory Board: Nicole Lau
>> Registered Office: Munich
>> Commercial Register: Amtsgericht Muenchen HRB 186928
>
> Intel Deutschland GmbH
> Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
> Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
> Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva  
> Chairperson of the Supervisory Board: Nicole Lau
> Registered Office: Munich
> Commercial Register: Amtsgericht Muenchen HRB 186928

RE: [PING][PATCH v5 1/1] gdb, infcmd: Support jump command with same line in multiple symtabs

[Andrew Burgess]

Andrew Burgess <aburgess@redhat.com> writes:

> "Puputti, Matti" <matti.puputti@intel.com> writes:
>
>> Kindly asking for review, approval and help to push.
>
> I'm just running a regression test, and then I'll push this later
> today.

I've now pushed this patch.

Thanks,
Andrew

>
> Thanks for your work on this,
> Andrew
>
>
>>
>>
>> Patch 4:	https://sourceware.org/pipermail/gdb-patches/2023-May/199464.html
>> Andrew's comments on patch 4:	https://sourceware.org/pipermail/gdb-patches/2023-May/199471.html
>> Eli's comments on patch 4:	https://sourceware.org/pipermail/gdb-patches/2023-May/199467.html
>> Patch 5:	https://sourceware.org/pipermail/gdb-patches/2023-May/199540.html
>> Eli’s ok on path 5:	https://sourceware.org/pipermail/gdb-patches/2023-May/199544.html
>> My msg to Andrew:	https://sourceware.org/pipermail/gdb-patches/2023-May/199570.html
>>
>> Br,
>> Matti Puputti
>>
>>
>>> -----Original Message-----
>>> From: Gdb-patches <gdb-patches-
>>> bounces+matti.puputti=intel.com@sourceware.org> On Behalf Of Matti
>>> Puputti via Gdb-patches
>>> Sent: Friday, May 12, 2023 3:33 PM
>>> To: gdb-patches@sourceware.org
>>> Cc: eliz@gnu.org; aburgess@redhat.com
>>> Subject: [PATCH v5 1/1] gdb, infcmd: Support jump command with same line
>>> in multiple symtabs
>>> 
>>> If a header file defining a static function is included in multiple source
>>> files, each calling the function, and GDB is asked to jump to a line inside
>>> that function, there would be multiple locations matching the target.  The
>>> solution in this commit is to select the location in the current symtab.
>>> ---
>>>  gdb/doc/gdb.texinfo                           |  4 +-
>>>  gdb/infcmd.c                                  | 14 ++++-
>>>  .../gdb.base/jump_multiple_objfiles-foo.c     | 24 +++++++++
>>>  .../gdb.base/jump_multiple_objfiles.c         | 30 +++++++++++
>>>  .../gdb.base/jump_multiple_objfiles.exp       | 54 +++++++++++++++++++
>>>  .../gdb.base/jump_multiple_objfiles.h         | 30 +++++++++++
>>>  6 files changed, 154 insertions(+), 2 deletions(-)
>>>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>>>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>>>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>>>  create mode 100755 gdb/testsuite/gdb.base/jump_multiple_objfiles.h
>>> 
>>> diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
>>> index 531147f6e6b..e43a71a7bbb 100644
>>> --- a/gdb/doc/gdb.texinfo
>>> +++ b/gdb/doc/gdb.texinfo
>>> @@ -20587,7 +20587,9 @@ an address of your own choosing, with the
>>> following commands:
>>>  Resume execution at the address of the code location that results from
>>>  resolving @var{locspec}.
>>>  @xref{Location Specifications}, for a description of the different
>>> -forms of @var{locspec}.  If @var{locspec} resolves to more than one
>>> +forms of @var{locspec}.  If @var{locspec} resolves to more than one
>>> address,
>>> +those outside the current compilation unit are ignored.  If considering just
>>> +the addresses in the current compilation unit still doesn't yield a unique
>>>  address, the command aborts before jumping.
>>>  Execution stops again immediately if there is a breakpoint there.  It
>>>  is common practice to use the @code{tbreak} command in conjunction
>>> diff --git a/gdb/infcmd.c b/gdb/infcmd.c
>>> index b12b58db9cb..15702f84894 100644
>>> --- a/gdb/infcmd.c
>>> +++ b/gdb/infcmd.c
>>> @@ -1070,7 +1070,19 @@ jump_command (const char *arg, int from_tty)
>>>    std::vector<symtab_and_line> sals
>>>      = decode_line_with_last_displayed (arg, DECODE_LINE_FUNFIRSTLINE);
>>>    if (sals.size () != 1)
>>> -    error (_("Unreasonable jump request"));
>>> +    {
>>> +      /* If multiple sal-objects were found, try dropping those that aren't
>>> +	 from the current symtab.  */
>>> +      struct symtab_and_line cursal = get_current_source_symtab_and_line
>>> ();
>>> +      sals.erase (std::remove_if (sals.begin (), sals.end (),
>>> +		  [&] (const symtab_and_line &sal)
>>> +		    {
>>> +		      return sal.symtab != cursal.symtab;
>>> +		    }), sals.end ());
>>> +      if (sals.size () != 1)
>>> +	error (_("Jump request is ambiguous: "
>>> +		 "does not resolve to a single address"));
>>> +    }
>>> 
>>>    symtab_and_line &sal = sals[0];
>>> 
>>> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>>> b/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>>> new file mode 100755
>>> index 00000000000..16863c8594b
>>> --- /dev/null
>>> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles-foo.c
>>> @@ -0,0 +1,24 @@
>>> +/* This testcase is part of GDB, the GNU debugger.
>>> +
>>> +   Copyright 2021-2023 Free Software Foundation, Inc.
>>> +
>>> +   This program is free software; you can redistribute it and/or modify
>>> +   it under the terms of the GNU General Public License as published by
>>> +   the Free Software Foundation; either version 3 of the License, or
>>> +   (at your option) any later version.
>>> +
>>> +   This program is distributed in the hope that it will be useful,
>>> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> +   GNU General Public License for more details.
>>> +
>>> +   You should have received a copy of the GNU General Public License
>>> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
>>> +
>>> +#include "jump_multiple_objfiles.h"
>>> +
>>> +int
>>> +foo (int n)
>>> +{
>>> +  return bar (n);
>>> +}
>>> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>>> b/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>>> new file mode 100755
>>> index 00000000000..b54eede9eb1
>>> --- /dev/null
>>> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.c
>>> @@ -0,0 +1,30 @@
>>> +/* This testcase is part of GDB, the GNU debugger.
>>> +
>>> +   Copyright 2021-2023 Free Software Foundation, Inc.
>>> +
>>> +   This program is free software; you can redistribute it and/or modify
>>> +   it under the terms of the GNU General Public License as published by
>>> +   the Free Software Foundation; either version 3 of the License, or
>>> +   (at your option) any later version.
>>> +
>>> +   This program is distributed in the hope that it will be useful,
>>> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> +   GNU General Public License for more details.
>>> +
>>> +   You should have received a copy of the GNU General Public License
>>> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
>>> +
>>> +#include "jump_multiple_objfiles.h"
>>> +
>>> +extern int foo (int n);
>>> +
>>> +
>>> +int
>>> +main ()
>>> +{
>>> +  int n = foo (1);
>>> +  bar (n);
>>> +
>>> +  return 0;
>>> +}
>>> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>>> b/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>>> new file mode 100755
>>> index 00000000000..b178e60150e
>>> --- /dev/null
>>> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.exp
>>> @@ -0,0 +1,54 @@
>>> +#   Copyright 2021-2023 Free Software Foundation, Inc.
>>> +
>>> +# This program is free software; you can redistribute it and/or modify
>>> +# it under the terms of the GNU General Public License as published by
>>> +# the Free Software Foundation; either version 3 of the License, or
>>> +# (at your option) any later version.
>>> +#
>>> +# This program is distributed in the hope that it will be useful,
>>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> +# GNU General Public License for more details.
>>> +#
>>> +# You should have received a copy of the GNU General Public License
>>> +# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
>>> +#
>>> +# Tests GDBs support for jump, when the source line is in multiple
>>> +# object files.
>>> +
>>> +
>>> +standard_testfile .c -foo.c .h
>>> +
>>> +
>>> +if { [prepare_for_testing "failed to prepare" $testfile \
>>> +      [list ${srcfile} ${srcfile2}]] } {
>>> +    return -1
>>> +}
>>> +
>>> +if { ![runto_main] } {
>>> +    return -1
>>> +}
>>> +
>>> +
>>> +set bar_first_line [gdb_get_line_number "bar-first-line" ${srcfile3}]
>>> +set bar_middle_line [gdb_get_line_number "bar-middle-line" ${srcfile3}]
>>> +set bar_last_line [gdb_get_line_number "bar-last-line" ${srcfile3}]
>>> +
>>> +
>>> +# Set breakpoints in the function bar.  Executable has two object files,
>>> +# and both have a copy of the same source lines.  Therefore breakpoints
>>> +# will have two locations.
>>> +gdb_breakpoint "${srcfile3}:${bar_first_line}"
>>> +gdb_breakpoint "${srcfile3}:${bar_last_line}"
>>> +
>>> +# Run to the breakpoint in bar.
>>> +gdb_continue_to_breakpoint "bar_first_line" \
>>> +    ".*${srcfile3}:${bar_first_line}.*"
>>> +
>>> +# Jump within the function.  Debugger shall be able to jump, even if the
>>> +# target line is in two different object files.  After jump, we will hit
>>> +# the breakpoint at the last line of bar.
>>> +gdb_test "jump ${bar_middle_line}"  [multi_line \
>>> +    "Continuing at ($hex).*" \
>>> +    "Breakpoint ${decimal}.* at .*${srcfile3}:${bar_last_line}.*"] \
>>> +    "Jump within the objectfile"
>>> diff --git a/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
>>> b/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
>>> new file mode 100755
>>> index 00000000000..0a3815e1808
>>> --- /dev/null
>>> +++ b/gdb/testsuite/gdb.base/jump_multiple_objfiles.h
>>> @@ -0,0 +1,30 @@
>>> +/* Copyright (C) 2021-2023 Free Software Foundation, Inc.
>>> +
>>> +   This file is part of GDB.
>>> +
>>> +   This program is free software; you can redistribute it and/or modify
>>> +   it under the terms of the GNU General Public License as published by
>>> +   the Free Software Foundation; either version 3 of the License, or
>>> +   (at your option) any later version.
>>> +
>>> +   This program is distributed in the hope that it will be useful,
>>> +   but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> +   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>>> +   GNU General Public License for more details.
>>> +
>>> +   You should have received a copy of the GNU General Public License
>>> +   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
>>> +
>>> +#ifndef JUMP_MULTIPLE_OBJFILES_H
>>> +#define JUMP_MULTIPLE_OBJFILES_H
>>> +
>>> +static int
>>> +bar (int n)
>>> +{
>>> +  int retval = n;
>>> +  retval += 1;      /* bar-first-line */
>>> +  retval *= -1;     /* bar-middle-line */
>>> +  return retval;    /* bar-last-line */
>>> +}
>>> +
>>> +#endif /* JUMP_MULTIPLE_OBJFILES_H */
>>> --
>>> 2.25.1
>>> 
>>> Intel Deutschland GmbH
>>> Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
>>> Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
>>> Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva
>>> Chairperson of the Supervisory Board: Nicole Lau
>>> Registered Office: Munich
>>> Commercial Register: Amtsgericht Muenchen HRB 186928
>>
>> Intel Deutschland GmbH
>> Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
>> Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
>> Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva  
>> Chairperson of the Supervisory Board: Nicole Lau
>> Registered Office: Munich
>> Commercial Register: Amtsgericht Muenchen HRB 186928

RE: [PING][PATCH v5 1/1] gdb, infcmd: Support jump command with same line in multiple symtabs

[Puputti, Matti]

Hi Andrew, Eliz,

Thank you for your support, it is very much appreciated!

Br,
Matti Puputti

> -----Original Message-----
> From: Andrew Burgess <aburgess@redhat.com>
> Sent: Wednesday, May 24, 2023 6:04 PM
> To: Puputti, Matti <matti.puputti@intel.com>; gdb-patches@sourceware.org
> Cc: eliz@gnu.org
> Subject: RE: [PING][PATCH v5 1/1] gdb, infcmd: Support jump command with
> same line in multiple symtabs
> 
> Andrew Burgess <aburgess@redhat.com> writes:
> 
> > "Puputti, Matti" <matti.puputti@intel.com> writes:
> >
> >> Kindly asking for review, approval and help to push.
> >
> > I'm just running a regression test, and then I'll push this later
> > today.
> 
> I've now pushed this patch.
> 
> Thanks,
> Andrew
> 
> >
> > Thanks for your work on this,
> > Andrew
> >

Intel Deutschland GmbH
Registered Address: Am Campeon 10, 85579 Neubiberg, Germany
Tel: +49 89 99 8853-0, www.intel.de <http://www.intel.de>
Managing Directors: Christin Eisenschmid, Sharon Heck, Tiffany Doon Silva  
Chairperson of the Supervisory Board: Nicole Lau
Registered Office: Munich
Commercial Register: Amtsgericht Muenchen HRB 186928