* [PATCH v3 1/9] MIPS: Add basic support for mips16e2
2023-05-24 9:41 [PATCH v3 0/9] MIPS: Add MIPS16e2 ASE instrucions Jie Mei
@ 2023-05-24 9:41 ` Jie Mei
2023-05-24 9:41 ` [PATCH v3 2/9] MIPS: Add MOVx instructions " Jie Mei
` (7 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Jie Mei @ 2023-05-24 9:41 UTC (permalink / raw)
To: gcc-patches; +Cc: YunQiang Su, Maciej W . Rozycki
[-- Attachment #1: Type: text/plain, Size: 6634 bytes --]
The MIPS16e2 ASE is an enhancement to the MIPS16e ASE,
which includes all MIPS16e instructions, with some addition.
It defines new special instructions for increasing
code density (e.g. Extend, PC-relative instructions, etc.).
This patch adds basic support for mips16e2 used by the
following series of patches.
gcc/ChangeLog:
* config/mips/mips.cc(mips_file_start): Add mips16e2 info
for output file.
* config/mips/mips.h(__mips_mips16e2): Defined a new
predefine macro.
(ISA_HAS_MIPS16E2): Defined a new macro.
(ASM_SPEC): Pass mmips16e2 to the assembler.
* config/mips/mips.opt: Add -m(no-)mips16e2 option.
* config/mips/predicates.md: Add clause for TARGET_MIPS16E2.
* doc/invoke.texi: Add -m(no-)mips16e2 option..
gcc/testsuite/ChangeLog:
* gcc.target/mips/mips.exp(mips_option_groups): Add -mmips16e2
option.
(mips-dg-init): Handle the recognization of mips16e2 targets.
(mips-dg-options): Add dependencies for mips16e2.
---
gcc/config/mips/mips.cc | 3 ++-
gcc/config/mips/mips.h | 8 ++++++++
gcc/config/mips/mips.opt | 4 ++++
gcc/config/mips/predicates.md | 2 +-
gcc/doc/invoke.texi | 7 +++++++
gcc/testsuite/gcc.target/mips/mips.exp | 10 ++++++++++
6 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/gcc/config/mips/mips.cc b/gcc/config/mips/mips.cc
index ca822758b41..585a3682c7b 100644
--- a/gcc/config/mips/mips.cc
+++ b/gcc/config/mips/mips.cc
@@ -10047,7 +10047,8 @@ mips_file_start (void)
fputs ("\t.module\tmsa\n", asm_out_file);
if (TARGET_XPA)
fputs ("\t.module\txpa\n", asm_out_file);
- /* FIXME: MIPS16E2 is not supported by GCC? gas does support it */
+ if (TARGET_MIPS16E2)
+ fputs ("\t.module\tmips16e2\n", asm_out_file);
if (TARGET_CRC)
fputs ("\t.module\tcrc\n", asm_out_file);
if (TARGET_GINV)
diff --git a/gcc/config/mips/mips.h b/gcc/config/mips/mips.h
index 6daf6d37165..c6781670a54 100644
--- a/gcc/config/mips/mips.h
+++ b/gcc/config/mips/mips.h
@@ -475,6 +475,9 @@ struct mips_cpu_info {
if (mips_base_compression_flags & MASK_MIPS16) \
builtin_define ("__mips16"); \
\
+ if (TARGET_MIPS16E2) \
+ builtin_define ("__mips_mips16e2"); \
+ \
if (TARGET_MIPS3D) \
builtin_define ("__mips3d"); \
\
@@ -1291,6 +1294,10 @@ struct mips_cpu_info {
/* The MSA ASE is available. */
#define ISA_HAS_MSA (TARGET_MSA && !TARGET_MIPS16)
+/* The MIPS16e V2 instructions are available. */
+#define ISA_HAS_MIPS16E2 (TARGET_MIPS16 && TARGET_MIPS16E2 \
+ && !TARGET_64BIT)
+
/* True if the result of a load is not available to the next instruction.
A nop will then be needed between instructions like "lw $4,..."
and "addiu $4,$4,1". */
@@ -1450,6 +1457,7 @@ struct mips_cpu_info {
%{msym32} %{mno-sym32} \
%{mtune=*}" \
FP_ASM_SPEC "\
+%{mmips16e2} \
%(subtarget_asm_spec)"
/* Extra switches sometimes passed to the linker. */
diff --git a/gcc/config/mips/mips.opt b/gcc/config/mips/mips.opt
index 195f5be01cc..4968ed0d544 100644
--- a/gcc/config/mips/mips.opt
+++ b/gcc/config/mips/mips.opt
@@ -380,6 +380,10 @@ msplit-addresses
Target Mask(SPLIT_ADDRESSES)
Optimize lui/addiu address loads.
+mmips16e2
+Target Var(TARGET_MIPS16E2) Init(0)
+Enable the MIPS16e V2 instructions.
+
msym32
Target Var(TARGET_SYM32)
Assume all symbols have 32-bit values.
diff --git a/gcc/config/mips/predicates.md b/gcc/config/mips/predicates.md
index e34de2937cc..87460a64652 100644
--- a/gcc/config/mips/predicates.md
+++ b/gcc/config/mips/predicates.md
@@ -369,7 +369,7 @@
{
/* When generating mips16 code, TARGET_LEGITIMATE_CONSTANT_P rejects
CONST_INTs that can't be loaded using simple insns. */
- if (TARGET_MIPS16)
+ if (TARGET_MIPS16 && !TARGET_MIPS16E2)
return false;
/* Don't handle multi-word moves this way; we don't want to introduce
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index ee78591c73e..1fa00594a91 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -26735,6 +26735,13 @@ MIPS16 code generation can also be controlled on a per-function basis
by means of @code{mips16} and @code{nomips16} attributes.
@xref{Function Attributes}, for more information.
+@opindex mmips16e2
+@opindex mno-mips16e2
+@item -mmips16e2
+@itemx -mno-mips16e2
+Use (do not use) the MIPS16e2 ASE. This option modifies the behavior
+of the @option{-mips16} option such that it targets the MIPS16e2 ASE@.
+
@opindex mflip-mips16
@item -mflip-mips16
Generate MIPS16 code on alternating functions. This option is provided
diff --git a/gcc/testsuite/gcc.target/mips/mips.exp b/gcc/testsuite/gcc.target/mips/mips.exp
index 15d574202d3..e79f685ceb0 100644
--- a/gcc/testsuite/gcc.target/mips/mips.exp
+++ b/gcc/testsuite/gcc.target/mips/mips.exp
@@ -301,6 +301,7 @@ foreach option {
loongson-mmi
loongson-ext
loongson-ext2
+ mips16e2
} {
lappend mips_option_groups $option "-m(no-|)$option"
}
@@ -821,6 +822,12 @@ proc mips-dg-init {} {
"-mno-mips16",
#endif
+ #ifdef __mips_mips16e2
+ "-mmips16e2",
+ #else
+ "-mno-mips16e2",
+ #endif
+
#ifdef __mips3d
"-mips3d",
#else
@@ -1038,6 +1045,7 @@ proc mips-dg-options { args } {
# dependency diagram.
mips_option_dependency options "-mips16" "-mno-micromips"
mips_option_dependency options "-mmicromips" "-mno-mips16"
+ mips_option_dependency options "-mmicromips" "-mno-mips16e2"
mips_option_dependency options "-mips3d" "-mpaired-single"
mips_option_dependency options "-mips3d" "-mno-micromips"
mips_option_dependency options "-mpaired-single" "-mfp64"
@@ -1417,6 +1425,7 @@ proc mips-dg-options { args } {
mips_make_test_option options "-mfp32"
}
mips_make_test_option options "-mno-dsp"
+ mips_make_test_option options "-mno-mips16e2"
mips_make_test_option options "-mno-synci"
mips_make_test_option options "-mno-micromips"
mips_make_test_option options "-mnan=legacy"
@@ -1449,6 +1458,7 @@ proc mips-dg-options { args } {
# Handle dependencies between options on the right of the diagram.
mips_option_dependency options "-mno-dsp" "-mno-dspr2"
+ mips_option_dependency options "-mno-mips16" "-mno-mips16e2"
mips_option_dependency options "-mno-explicit-relocs" "-mgpopt"
switch -- [mips_test_option options small-data] {
"" -
--
2.40.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v3 2/9] MIPS: Add MOVx instructions support for mips16e2
2023-05-24 9:41 [PATCH v3 0/9] MIPS: Add MIPS16e2 ASE instrucions Jie Mei
2023-05-24 9:41 ` [PATCH v3 1/9] MIPS: Add basic support for mips16e2 Jie Mei
@ 2023-05-24 9:41 ` Jie Mei
2023-05-24 9:41 ` [PATCH v3 3/9] MIPS: Add instruction about global pointer register " Jie Mei
` (6 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Jie Mei @ 2023-05-24 9:41 UTC (permalink / raw)
To: gcc-patches; +Cc: YunQiang Su, Maciej W . Rozycki
[-- Attachment #1: Type: text/plain, Size: 6496 bytes --]
This patch adds MOVx instructions from mips16e2
(movn,movz,movtn,movtz) with corresponding tests.
gcc/ChangeLog:
* config/mips/mips.h(ISA_HAS_CONDMOVE): Add condition for ISA_HAS_MIPS16E2.
* config/mips/mips.md(*mov<GPR:mode>_on_<MOVECC:mode>): Add logics for MOVx insts.
(*mov<GPR:mode>_on_<MOVECC:mode>_mips16e2): Generate MOVx instruction.
(*mov<GPR:mode>_on_<GPR2:mode>_ne): Add logics for MOVx insts.
(*mov<GPR:mode>_on_<GPR2:mode>_ne_mips16e2): Generate MOVx instruction.
* config/mips/predicates.md(reg_or_0_operand_mips16e2): New predicate for MOVx insts.
gcc/testsuite/ChangeLog:
* gcc.target/mips/mips16e2-cmov.c: Added tests for MOVx instructions.
---
gcc/config/mips/mips.h | 1 +
gcc/config/mips/mips.md | 38 ++++++++++-
gcc/config/mips/predicates.md | 6 ++
gcc/testsuite/gcc.target/mips/mips16e2-cmov.c | 68 +++++++++++++++++++
4 files changed, 111 insertions(+), 2 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/mips/mips16e2-cmov.c
diff --git a/gcc/config/mips/mips.h b/gcc/config/mips/mips.h
index c6781670a54..a94b253e898 100644
--- a/gcc/config/mips/mips.h
+++ b/gcc/config/mips/mips.h
@@ -1081,6 +1081,7 @@ struct mips_cpu_info {
ST Loongson 2E/2F. */
#define ISA_HAS_CONDMOVE (ISA_HAS_FP_CONDMOVE \
|| TARGET_MIPS5900 \
+ || ISA_HAS_MIPS16E2 \
|| TARGET_LOONGSON_2EF)
/* ISA has LDC1 and SDC1. */
diff --git a/gcc/config/mips/mips.md b/gcc/config/mips/mips.md
index ac1d77afc7d..48d5f419ce0 100644
--- a/gcc/config/mips/mips.md
+++ b/gcc/config/mips/mips.md
@@ -7341,26 +7341,60 @@
(const_int 0)])
(match_operand:GPR 2 "reg_or_0_operand" "dJ,0")
(match_operand:GPR 3 "reg_or_0_operand" "0,dJ")))]
- "ISA_HAS_CONDMOVE"
+ "!TARGET_MIPS16 && ISA_HAS_CONDMOVE"
"@
mov%T4\t%0,%z2,%1
mov%t4\t%0,%z3,%1"
[(set_attr "type" "condmove")
(set_attr "mode" "<GPR:MODE>")])
+(define_insn "*mov<GPR:mode>_on_<MOVECC:mode>_mips16e2"
+ [(set (match_operand:GPR 0 "register_operand" "=d,d,d,d")
+ (if_then_else:GPR
+ (match_operator 4 "equality_operator"
+ [(match_operand:MOVECC 1 "register_operand" "<MOVECC:reg>,<MOVECC:reg>,t,t")
+ (const_int 0)])
+ (match_operand:GPR 2 "reg_or_0_operand_mips16e2" "dJ,0,dJ,0")
+ (match_operand:GPR 3 "reg_or_0_operand_mips16e2" "0,dJ,0,dJ")))]
+ "ISA_HAS_MIPS16E2 && ISA_HAS_CONDMOVE"
+ "@
+ mov%T4\t%0,%z2,%1
+ mov%t4\t%0,%z3,%1
+ movt%T4\t%0,%z2
+ movt%t4\t%0,%z3"
+ [(set_attr "type" "condmove")
+ (set_attr "mode" "<GPR:MODE>")
+ (set_attr "extended_mips16" "yes")])
+
(define_insn "*mov<GPR:mode>_on_<GPR2:mode>_ne"
[(set (match_operand:GPR 0 "register_operand" "=d,d")
(if_then_else:GPR
(match_operand:GPR2 1 "register_operand" "<GPR2:reg>,<GPR2:reg>")
(match_operand:GPR 2 "reg_or_0_operand" "dJ,0")
(match_operand:GPR 3 "reg_or_0_operand" "0,dJ")))]
- "ISA_HAS_CONDMOVE"
+ "!TARGET_MIPS16 && ISA_HAS_CONDMOVE"
"@
movn\t%0,%z2,%1
movz\t%0,%z3,%1"
[(set_attr "type" "condmove")
(set_attr "mode" "<GPR:MODE>")])
+(define_insn "*mov<GPR:mode>_on_<GPR2:mode>_ne_mips16e2"
+ [(set (match_operand:GPR 0 "register_operand" "=d,d,d,d")
+ (if_then_else:GPR
+ (match_operand:GPR2 1 "register_operand" "<GPR2:reg>,<GPR2:reg>,t,t")
+ (match_operand:GPR 2 "reg_or_0_operand_mips16e2" "dJ,0,dJ,0")
+ (match_operand:GPR 3 "reg_or_0_operand_mips16e2" "0,dJ,0,dJ")))]
+ "ISA_HAS_MIPS16E2 && ISA_HAS_CONDMOVE"
+ "@
+ movn\t%0,%z2,%1
+ movz\t%0,%z3,%1
+ movtn\t%0,%z2
+ movtz\t%0,%z3"
+ [(set_attr "type" "condmove")
+ (set_attr "mode" "<GPR:MODE>")
+ (set_attr "extended_mips16" "yes")])
+
(define_insn "*mov<SCALARF:mode>_on_<MOVECC:mode>"
[(set (match_operand:SCALARF 0 "register_operand" "=f,f")
(if_then_else:SCALARF
diff --git a/gcc/config/mips/predicates.md b/gcc/config/mips/predicates.md
index 87460a64652..e2cd5a8c65f 100644
--- a/gcc/config/mips/predicates.md
+++ b/gcc/config/mips/predicates.md
@@ -114,6 +114,12 @@
(not (match_test "TARGET_MIPS16")))
(match_operand 0 "register_operand")))
+(define_predicate "reg_or_0_operand_mips16e2"
+ (ior (and (match_operand 0 "const_0_operand")
+ (ior (not (match_test "TARGET_MIPS16"))
+ (match_test "ISA_HAS_MIPS16E2")))
+ (match_operand 0 "register_operand")))
+
(define_predicate "const_1_operand"
(and (match_code "const_int,const_double,const_vector")
(match_test "op == CONST1_RTX (GET_MODE (op))")))
diff --git a/gcc/testsuite/gcc.target/mips/mips16e2-cmov.c b/gcc/testsuite/gcc.target/mips/mips16e2-cmov.c
new file mode 100644
index 00000000000..6e9dd82ebf3
--- /dev/null
+++ b/gcc/testsuite/gcc.target/mips/mips16e2-cmov.c
@@ -0,0 +1,68 @@
+/* { dg-options "-mno-abicalls -mgpopt -G8 -mabi=32 -mips16 -mmips16e2" } */
+/* { dg-skip-if "code quality test" { *-*-* } { "-O0" } { "" } } */
+
+/* Test MOVN. */
+
+/* { dg-final { scan-assembler-times "test01:.*\tmovn\t.*test01\n" 1 } } */
+int
+test01 (int a, int b, int c)
+{
+ return (a==0) ? b : c;
+}
+
+/* { dg-final { scan-assembler-times "test02:.*\tmovn\t\\\$.,\\\$0.*test02\n" 1 } } */
+int
+test02 (int a, int b, int c)
+{
+ return (a==0) ? b : 0;
+}
+
+/* Test MOVZ. */
+
+/* { dg-final { scan-assembler-times "test03:.*\tmovz\t.*test03\n" 1 } } */
+int
+test03 (int a, int b, int c)
+{
+ return a ? b : c;
+}
+
+/* { dg-final { scan-assembler-times "test04:.*\tmovz\t\\\$.,\\\$0.*test04\n" 1 } } */
+int
+test04 (int a, int b, int c)
+{
+ return a ? b : 0;
+}
+
+/* Test MOVTN. */
+
+/* { dg-final { scan-assembler-times "test05:.*\tmovtn\t.*test05\n" 1 } } */
+int
+test05 (int a, int b, int c, int d)
+{
+ return a >= b ? c : d;
+}
+
+/* { dg-final { scan-assembler-times "test06:.*\tmovtn\t\\\$2,\\\$0.*test06\n" 1 } } */
+int
+test06 (int a, int b, int c, int d)
+{
+ return a >= b ? c : 0;
+}
+
+/* Test MOVTZ. */
+
+/* { dg-final { scan-assembler-times "test07:.*\tmovtz\t.*test07\n" 1 } } */
+int
+test07 (int a, int b, int c, int d)
+{
+ return a < b ? c : d;
+}
+
+/* { dg-final { scan-assembler-times "test08:.*\tmovtz\t\\\$.,\\\$0.*test08\n" 1 } } */
+int
+test08 (int a, int b, int c, int d)
+{
+ return a < b ? c : 0;
+}
+
+
--
2.40.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v3 3/9] MIPS: Add instruction about global pointer register for mips16e2
2023-05-24 9:41 [PATCH v3 0/9] MIPS: Add MIPS16e2 ASE instrucions Jie Mei
2023-05-24 9:41 ` [PATCH v3 1/9] MIPS: Add basic support for mips16e2 Jie Mei
2023-05-24 9:41 ` [PATCH v3 2/9] MIPS: Add MOVx instructions " Jie Mei
@ 2023-05-24 9:41 ` Jie Mei
2023-05-24 9:41 ` [PATCH v3 4/9] MIPS: Add bitwise instructions " Jie Mei
` (5 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Jie Mei @ 2023-05-24 9:41 UTC (permalink / raw)
To: gcc-patches; +Cc: YunQiang Su, Maciej W . Rozycki
[-- Attachment #1: Type: text/plain, Size: 6971 bytes --]
The mips16e2 ASE uses eight general-purpose registers
from mips32, with some special-purpose registers,
these registers are GPRs: s0-1, v0-1, a0-3, and
special registers: t8, gp, sp, ra.
As mentioned above, the special register gp is
used in mips16e2, which is the global pointer register,
it is used by some of the instructions in the ASE,
for instance, ADDIU, LB/LBU, etc. .
This patch adds these instructions with corresponding tests.
gcc/ChangeLog:
* config/mips/mips.cc(mips_regno_mode_ok_for_base_p): Generate instructions
that uses global pointer register.
(mips16_unextended_reference_p): Same as above.
(mips_pic_base_register): Same as above.
(mips_init_relocs): Same as above.
* config/mips/mips.h(MIPS16_GP_LOADS): Defined a new macro.
(GLOBAL_POINTER_REGNUM): Moved to machine description `mips.md`.
* config/mips/mips.md(GLOBAL_POINTER_REGNUM): Moved to here from above.
(*lowsi_mips16_gp):New `define_insn *low<mode>_mips16`.
gcc/testsuite/ChangeLog:
* gcc.target/mips/mips16e2-gp.c: New tests for mips16e2.
---
gcc/config/mips/mips.cc | 10 +-
gcc/config/mips/mips.h | 6 +-
gcc/config/mips/mips.md | 11 +++
gcc/testsuite/gcc.target/mips/mips16e2-gp.c | 101 ++++++++++++++++++++
4 files changed, 121 insertions(+), 7 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/mips/mips16e2-gp.c
diff --git a/gcc/config/mips/mips.cc b/gcc/config/mips/mips.cc
index 585a3682c7b..be470bbb50d 100644
--- a/gcc/config/mips/mips.cc
+++ b/gcc/config/mips/mips.cc
@@ -2474,6 +2474,9 @@ mips_regno_mode_ok_for_base_p (int regno, machine_mode mode,
if (TARGET_MIPS16 && regno == STACK_POINTER_REGNUM)
return GET_MODE_SIZE (mode) == 4 || GET_MODE_SIZE (mode) == 8;
+ if (MIPS16_GP_LOADS && regno == GLOBAL_POINTER_REGNUM)
+ return (UNITS_PER_WORD > 4 ? GET_MODE_SIZE (mode) <= 4 : true);
+
return TARGET_MIPS16 ? M16_REG_P (regno) : GP_REG_P (regno);
}
@@ -2689,7 +2692,8 @@ static bool
mips16_unextended_reference_p (machine_mode mode, rtx base,
unsigned HOST_WIDE_INT offset)
{
- if (mode != BLKmode && offset % GET_MODE_SIZE (mode) == 0)
+ if (mode != BLKmode && offset % GET_MODE_SIZE (mode) == 0
+ && REGNO (base) != GLOBAL_POINTER_REGNUM)
{
if (GET_MODE_SIZE (mode) == 4 && base == stack_pointer_rtx)
return offset < 256U * GET_MODE_SIZE (mode);
@@ -3249,7 +3253,7 @@ mips16_gp_pseudo_reg (void)
rtx
mips_pic_base_register (rtx temp)
{
- if (!TARGET_MIPS16)
+ if (MIPS16_GP_LOADS ||!TARGET_MIPS16)
return pic_offset_table_rtx;
if (currently_expanding_to_rtl)
@@ -8756,7 +8760,7 @@ mips_init_relocs (void)
}
}
- if (TARGET_MIPS16)
+ if (!MIPS16_GP_LOADS && TARGET_MIPS16)
{
/* The high part is provided by a pseudo copy of $gp. */
mips_split_p[SYMBOL_GP_RELATIVE] = true;
diff --git a/gcc/config/mips/mips.h b/gcc/config/mips/mips.h
index a94b253e898..3ec33fbba71 100644
--- a/gcc/config/mips/mips.h
+++ b/gcc/config/mips/mips.h
@@ -1375,6 +1375,8 @@ struct mips_cpu_info {
/* ISA includes the pop instruction. */
#define ISA_HAS_POP (TARGET_OCTEON && !TARGET_MIPS16)
+#define MIPS16_GP_LOADS (ISA_HAS_MIPS16E2 && !TARGET_64BIT)
+
/* The CACHE instruction is available in non-MIPS16 code. */
#define TARGET_CACHE_BUILTIN (mips_isa >= MIPS_ISA_MIPS3)
@@ -2067,10 +2069,6 @@ FP_ASM_SPEC "\
function address than to call an address kept in a register. */
#define NO_FUNCTION_CSE 1
-/* The ABI-defined global pointer. Sometimes we use a different
- register in leaf functions: see PIC_OFFSET_TABLE_REGNUM. */
-#define GLOBAL_POINTER_REGNUM (GP_REG_FIRST + 28)
-
/* We normally use $28 as the global pointer. However, when generating
n32/64 PIC, it is better for leaf functions to use a call-clobbered
register instead. They can then avoid saving and restoring $28
diff --git a/gcc/config/mips/mips.md b/gcc/config/mips/mips.md
index 48d5f419ce0..9de5013aad1 100644
--- a/gcc/config/mips/mips.md
+++ b/gcc/config/mips/mips.md
@@ -167,6 +167,7 @@
(GET_FCSR_REGNUM 2)
(SET_FCSR_REGNUM 4)
(PIC_FUNCTION_ADDR_REGNUM 25)
+ (GLOBAL_POINTER_REGNUM 28)
(RETURN_ADDR_REGNUM 31)
(CPRESTORE_SLOT_REGNUM 76)
(GOT_VERSION_REGNUM 79)
@@ -4678,6 +4679,16 @@
[(set_attr "alu_type" "add")
(set_attr "mode" "<MODE>")])
+(define_insn "*lowsi_mips16_gp"
+ [(set (match_operand:SI 0 "register_operand" "=d")
+ (lo_sum:SI (reg:SI GLOBAL_POINTER_REGNUM)
+ (match_operand 1 "immediate_operand" "")))]
+ "MIPS16_GP_LOADS"
+ "addiu\t%0,$28,%R1"
+ [(set_attr "alu_type" "add")
+ (set_attr "mode" "SI")
+ (set_attr "extended_mips16" "yes")])
+
(define_insn "*low<mode>_mips16"
[(set (match_operand:P 0 "register_operand" "=d")
(lo_sum:P (match_operand:P 1 "register_operand" "0")
diff --git a/gcc/testsuite/gcc.target/mips/mips16e2-gp.c b/gcc/testsuite/gcc.target/mips/mips16e2-gp.c
new file mode 100644
index 00000000000..7955472bde3
--- /dev/null
+++ b/gcc/testsuite/gcc.target/mips/mips16e2-gp.c
@@ -0,0 +1,101 @@
+/* { dg-options "-mno-abicalls -mgpopt -G8 -mabi=32 -mips16 -mmips16e2" } */
+/* { dg-skip-if "per-function expected output" { *-*-* } { "-flto" } { "" } } */
+
+/* Generate GP-relative ADDIU. */
+
+/* { dg-final { scan-assembler "test01:.*\taddiu\t\\\$2,\\\$28.*test01\n" } } */
+int arr[2];
+
+int *
+test01 (void)
+{
+ return (&arr[1]);
+}
+
+/* Test LB[GP]. */
+
+/* { dg-final { scan-assembler "test02:.*\tlb\t.*\\\$28.*test02\n" } } */
+signed char c02;
+
+signed char
+test02 (void)
+{
+ return c02;
+}
+
+/* Test LBU[GP]. */
+
+/* { dg-final { scan-assembler "test03:.*\tlbu\t.*\\\$28.*test03\n" } } */
+unsigned char uc03;
+
+unsigned char
+test03 (void)
+{
+ return uc03;
+}
+
+/* Test LH[GP]. */
+
+/* { dg-final { scan-assembler "test04:.*\tlh\t.*\\\$28.*test04\n" } } */
+short s04;
+
+short
+test04 (void)
+{
+ return s04;
+}
+
+/* Test LHU[GP]. */
+
+/* { dg-final { scan-assembler "test05:.*\tlhu\t.*\\\$28.*test05\n" } } */
+unsigned short s05;
+
+unsigned short
+test05 (void)
+{
+ return s05;
+}
+
+/* Test LW[GP]. */
+
+/* { dg-final { scan-assembler "test06:.*\tlw\t.*\\\$28.*test06\n" } } */
+int i06;
+
+int
+test06 (void)
+{
+ return i06;
+}
+
+/* Test SB[GP]. */
+
+/* { dg-final { scan-assembler "test07:.*\tsb\t.*\\\$28.*test07\n" } } */
+char c07;
+
+void
+test07 (char x)
+{
+ c07 = x;
+}
+
+/* Test SH[GP]. */
+
+/* { dg-final { scan-assembler "test08:.*\tsh\t.*\\\$28.*test08\n" } } */
+short s08;
+
+void
+test08 (short x)
+{
+ s08 = x;
+}
+
+/* Test SW[GP]. */
+
+/* { dg-final { scan-assembler "test09:.*\tsw\t.*\\\$28.*test09\n" } } */
+int i09;
+
+void
+test09 (int x)
+{
+ i09 = x;
+}
--
2.40.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v3 4/9] MIPS: Add bitwise instructions for mips16e2
2023-05-24 9:41 [PATCH v3 0/9] MIPS: Add MIPS16e2 ASE instrucions Jie Mei
` (2 preceding siblings ...)
2023-05-24 9:41 ` [PATCH v3 3/9] MIPS: Add instruction about global pointer register " Jie Mei
@ 2023-05-24 9:41 ` Jie Mei
2023-05-24 9:41 ` [PATCH v3 5/9] MIPS: Add LUI instruction " Jie Mei
` (4 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Jie Mei @ 2023-05-24 9:41 UTC (permalink / raw)
To: gcc-patches; +Cc: YunQiang Su, Maciej W . Rozycki
[-- Attachment #1: Type: text/plain, Size: 16835 bytes --]
There are shortened bitwise instructions in the mips16e2 ASE,
for instance, ANDI, ORI/XORI, EXT, INS etc. .
This patch adds these instrutions with corresponding tests.
gcc/ChangeLog:
* config/mips/constraints.md(Yz): New constraints for mips16e2.
* config/mips/mips-protos.h(mips_bit_clear_p): Declared new function.
(mips_bit_clear_info): Same as above.
* config/mips/mips.cc(mips_bit_clear_info): New function for
generating instructions.
(mips_bit_clear_p): Same as above.
* config/mips/mips.h(ISA_HAS_EXT_INS): Add clause for ISA_HAS_MIPS16E2.
* config/mips/mips.md(extended_mips16): Generates EXT and INS instructions.
(*and<mode>3): Generates INS instruction.
(*and<mode>3_mips16): Generates EXT, INS and ANDI instructions.
(ior<mode>3): Add logics for ORI instruction.
(*ior<mode>3_mips16_asmacro): Generates ORI instrucion.
(*ior<mode>3_mips16): Add logics for XORI instruction.
(*xor<mode>3_mips16): Generates XORI instrucion.
(*extzv<mode>): Add logics for EXT instruction.
(*insv<mode>): Add logics for INS instruction.
* config/mips/predicates.md(bit_clear_operand): New predicate for
generating bitwise instructions.
(and_reg_operand): Add logics for generating bitwise instructions.
gcc/testsuite/ChangeLog:
* gcc.target/mips/mips16e2.c: New tests for mips16e2.
---
gcc/config/mips/constraints.md | 4 +
gcc/config/mips/mips-protos.h | 4 +
gcc/config/mips/mips.cc | 67 ++++++++++++++-
gcc/config/mips/mips.h | 3 +-
gcc/config/mips/mips.md | 91 ++++++++++++++++----
gcc/config/mips/predicates.md | 13 ++-
gcc/testsuite/gcc.target/mips/mips16e2.c | 102 +++++++++++++++++++++++
7 files changed, 263 insertions(+), 21 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/mips/mips16e2.c
diff --git a/gcc/config/mips/constraints.md b/gcc/config/mips/constraints.md
index 49d1a43c613..22d4d84f074 100644
--- a/gcc/config/mips/constraints.md
+++ b/gcc/config/mips/constraints.md
@@ -264,6 +264,10 @@
(and (match_code "const_vector")
(match_test "op == CONST0_RTX (mode)")))
+(define_constraint "Yz"
+ "@internal"
+ (match_operand 0 "bit_clear_operand"))
+
(define_constraint "YA"
"@internal
An unsigned 6-bit constant."
diff --git a/gcc/config/mips/mips-protos.h b/gcc/config/mips/mips-protos.h
index 20483469105..2791b9f220a 100644
--- a/gcc/config/mips/mips-protos.h
+++ b/gcc/config/mips/mips-protos.h
@@ -388,4 +388,8 @@ extern void mips_register_frame_header_opt (void);
extern void mips_expand_vec_cond_expr (machine_mode, machine_mode, rtx *);
extern void mips_expand_vec_cmp_expr (rtx *);
+extern bool mips_bit_clear_p (enum machine_mode, unsigned HOST_WIDE_INT);
+extern void mips_bit_clear_info (enum machine_mode, unsigned HOST_WIDE_INT,
+ int *, int *);
+
#endif /* ! GCC_MIPS_PROTOS_H */
diff --git a/gcc/config/mips/mips.cc b/gcc/config/mips/mips.cc
index be470bbb50d..d86911d10c2 100644
--- a/gcc/config/mips/mips.cc
+++ b/gcc/config/mips/mips.cc
@@ -3895,6 +3895,10 @@ mips16_constant_cost (int code, HOST_WIDE_INT x)
return 0;
return -1;
+ case ZERO_EXTRACT:
+ /* The bit position and size are immediate operands. */
+ return ISA_HAS_EXT_INS ? COSTS_N_INSNS (1) : -1;
+
default:
return -1;
}
@@ -22753,7 +22757,68 @@ mips_asm_file_end (void)
if (NEED_INDICATE_EXEC_STACK)
file_end_indicate_exec_stack ();
}
-\f
+
+void
+mips_bit_clear_info (enum machine_mode mode, unsigned HOST_WIDE_INT m,
+ int *start_pos, int *size)
+{
+ unsigned int shift = 0;
+ unsigned int change_count = 0;
+ unsigned int prev_val = 1;
+ unsigned int curr_val = 0;
+ unsigned int end_pos = GET_MODE_SIZE (mode) * BITS_PER_UNIT;
+
+ for (shift = 0 ; shift < (GET_MODE_SIZE (mode) * BITS_PER_UNIT) ; shift++)
+ {
+ curr_val = (unsigned int)((m & (unsigned int)(1 << shift)) >> shift);
+ if (curr_val != prev_val)
+ {
+ change_count++;
+ switch (change_count)
+ {
+ case 1:
+ *start_pos = shift;
+ break;
+ case 2:
+ end_pos = shift;
+ break;
+ default:
+ gcc_unreachable ();
+ }
+ }
+ prev_val = curr_val;
+ }
+ *size = (end_pos - *start_pos);
+}
+
+bool
+mips_bit_clear_p (enum machine_mode mode, unsigned HOST_WIDE_INT m)
+{
+ unsigned int shift = 0;
+ unsigned int change_count = 0;
+ unsigned int prev_val = 1;
+ unsigned int curr_val = 0;
+
+ if (mode != SImode && mode != VOIDmode)
+ return false;
+
+ if (!ISA_HAS_EXT_INS)
+ return false;
+
+ for (shift = 0 ; shift < (UNITS_PER_WORD * BITS_PER_UNIT) ; shift++)
+ {
+ curr_val = (unsigned int)((m & (unsigned int)(1 << shift)) >> shift);
+ if (curr_val != prev_val)
+ change_count++;
+ prev_val = curr_val;
+ }
+
+ if (change_count == 2)
+ return true;
+
+ return false;
+}
+
/* Initialize the GCC target structure. */
#undef TARGET_ASM_ALIGNED_HI_OP
#define TARGET_ASM_ALIGNED_HI_OP "\t.half\t"
diff --git a/gcc/config/mips/mips.h b/gcc/config/mips/mips.h
index 3ec33fbba71..eefe2aa0910 100644
--- a/gcc/config/mips/mips.h
+++ b/gcc/config/mips/mips.h
@@ -1266,7 +1266,8 @@ struct mips_cpu_info {
#define ISA_HAS_SEB_SEH (mips_isa_rev >= 2 && !TARGET_MIPS16)
/* ISA includes the MIPS32/64 rev 2 ext and ins instructions. */
-#define ISA_HAS_EXT_INS (mips_isa_rev >= 2 && !TARGET_MIPS16)
+#define ISA_HAS_EXT_INS ((mips_isa_rev >= 2 && !TARGET_MIPS16) \
+ || ISA_HAS_MIPS16E2)
/* ISA has instructions for accessing top part of 64-bit fp regs. */
#define ISA_HAS_MXHC1 (!TARGET_FLOAT32 \
diff --git a/gcc/config/mips/mips.md b/gcc/config/mips/mips.md
index 9de5013aad1..9f652310aa2 100644
--- a/gcc/config/mips/mips.md
+++ b/gcc/config/mips/mips.md
@@ -461,7 +461,7 @@
(if_then_else (ior ;; In general, constant-pool loads are extended
;; instructions. We don't yet optimize for 16-bit
;; PC-relative references.
- (eq_attr "move_type" "sll0,loadpool")
+ (eq_attr "move_type" "sll0,loadpool,ext_ins")
(eq_attr "jal" "direct")
(eq_attr "got" "load"))
(const_string "yes")
@@ -3312,12 +3312,13 @@
;; register =op1 x
(define_insn "*and<mode>3"
- [(set (match_operand:GPR 0 "register_operand" "=d,d,d,!u,d,d,d,!u,d")
- (and:GPR (match_operand:GPR 1 "nonimmediate_operand" "o,o,W,!u,d,d,d,0,d")
- (match_operand:GPR 2 "and_operand" "Yb,Yh,Yw,Uean,K,Yx,Yw,!u,d")))]
+ [(set (match_operand:GPR 0 "register_operand" "=d,d,d,!u,d,d,d,!u,d,d")
+ (and:GPR (match_operand:GPR 1 "nonimmediate_operand" "o,o,W,!u,d,d,d,0,d,0")
+ (match_operand:GPR 2 "and_operand" "Yb,Yh,Yw,Uean,K,Yx,Yw,!u,d,Yz")))]
"!TARGET_MIPS16 && and_operands_ok (<MODE>mode, operands[1], operands[2])"
{
int len;
+ int pos;
switch (which_alternative)
{
@@ -3342,20 +3343,28 @@
case 7:
case 8:
return "and\t%0,%1,%2";
+ case 9:
+ mips_bit_clear_info (<MODE>mode, INTVAL (operands[2]), &pos, &len);
+ operands[1] = GEN_INT (pos);
+ operands[2] = GEN_INT (len);
+ return "<d>ins\t%0,$0,%1,%2";
default:
gcc_unreachable ();
}
}
- [(set_attr "move_type" "load,load,load,andi,andi,ext_ins,shift_shift,logical,logical")
- (set_attr "compression" "*,*,*,micromips,*,*,*,micromips,*")
+ [(set_attr "move_type" "load,load,load,andi,andi,ext_ins,shift_shift,logical,logical,ext_ins")
+ (set_attr "compression" "*,*,*,micromips,*,*,*,micromips,*,*")
(set_attr "mode" "<MODE>")])
(define_insn "*and<mode>3_mips16"
- [(set (match_operand:GPR 0 "register_operand" "=d,d,d,d,d")
- (and:GPR (match_operand:GPR 1 "nonimmediate_operand" "%W,W,W,d,0")
- (match_operand:GPR 2 "and_operand" "Yb,Yh,Yw,Yw,d")))]
+ [(set (match_operand:GPR 0 "register_operand" "=d,d,d,d,d,d,d,d")
+ (and:GPR (match_operand:GPR 1 "nonimmediate_operand" "%W,W,W,d,0,d,0,0?")
+ (match_operand:GPR 2 "and_operand" "Yb,Yh,Yw,Yw,d,Yx,Yz,K")))]
"TARGET_MIPS16 && and_operands_ok (<MODE>mode, operands[1], operands[2])"
{
+ int len;
+ int pos;
+
switch (which_alternative)
{
case 0:
@@ -3371,12 +3380,32 @@
return "#";
case 4:
return "and\t%0,%2";
+ case 5:
+ len = low_bitmask_len (<MODE>mode, INTVAL (operands[2]));
+ operands[2] = GEN_INT (len);
+ return "ext\t%0,%1,0,%2";
+ case 6:
+ mips_bit_clear_info (<MODE>mode, INTVAL (operands[2]), &pos, &len);
+ operands[1] = GEN_INT (pos);
+ operands[2] = GEN_INT (len);
+ return "ins\t%0,$0,%1,%2";
+ case 7:
+ return "andi\t%0,%x2";
default:
gcc_unreachable ();
}
}
- [(set_attr "move_type" "load,load,load,shift_shift,logical")
- (set_attr "mode" "<MODE>")])
+ [(set_attr "move_type" "load,load,load,shift_shift,logical,ext_ins,ext_ins,andi")
+ (set_attr "mode" "<MODE>")
+ (set_attr "extended_mips16" "no,no,no,no,no,yes,yes,yes")
+ (set (attr "enabled")
+ (cond [(and (eq_attr "alternative" "7")
+ (not (match_test "ISA_HAS_MIPS16E2")))
+ (const_string "no")
+ (and (eq_attr "alternative" "0,1")
+ (match_test "!GENERATE_MIPS16E"))
+ (const_string "no")]
+ (const_string "yes")))])
(define_expand "ior<mode>3"
[(set (match_operand:GPR 0 "register_operand")
@@ -3384,7 +3413,7 @@
(match_operand:GPR 2 "uns_arith_operand")))]
""
{
- if (TARGET_MIPS16)
+ if (TARGET_MIPS16 && !ISA_HAS_MIPS16E2)
operands[2] = force_reg (<MODE>mode, operands[2]);
})
@@ -3401,11 +3430,23 @@
(set_attr "compression" "micromips,*,*")
(set_attr "mode" "<MODE>")])
+(define_insn "*ior<mode>3_mips16_asmacro"
+ [(set (match_operand:GPR 0 "register_operand" "=d,d")
+ (ior:GPR (match_operand:GPR 1 "register_operand" "%0,0")
+ (match_operand:GPR 2 "uns_arith_operand" "d,K")))]
+ "ISA_HAS_MIPS16E2"
+ "@
+ or\t%0,%2
+ ori\t%0,%x2"
+ [(set_attr "alu_type" "or")
+ (set_attr "mode" "<MODE>")
+ (set_attr "extended_mips16" "*,yes")])
+
(define_insn "*ior<mode>3_mips16"
[(set (match_operand:GPR 0 "register_operand" "=d")
(ior:GPR (match_operand:GPR 1 "register_operand" "%0")
(match_operand:GPR 2 "register_operand" "d")))]
- "TARGET_MIPS16"
+ "TARGET_MIPS16 && !ISA_HAS_MIPS16E2"
"or\t%0,%2"
[(set_attr "alu_type" "or")
(set_attr "mode" "<MODE>")])
@@ -3430,19 +3471,31 @@
(set_attr "compression" "micromips,*,*")
(set_attr "mode" "<MODE>")])
+;; We increase statically the cost of the output register for XORI
+;; to counterweight LRA cost calculation as XORI tends to be chosen
+;; frequently hurting the code size. The reason of not choosing CMPI is
+;; that LRA tends to add up the cost of the T register as it is in a small
+;; class and a possible reload. In reality, the use of T register comes for
+;; free in a number of cases as we don't need any MIPS16 registers.
(define_insn "*xor<mode>3_mips16"
- [(set (match_operand:GPR 0 "register_operand" "=d,t,t,t")
- (xor:GPR (match_operand:GPR 1 "register_operand" "%0,d,d,d")
- (match_operand:GPR 2 "uns_arith_operand" "d,Uub8,K,d")))]
+ [(set (match_operand:GPR 0 "register_operand" "=d,t,t,t,d?")
+ (xor:GPR (match_operand:GPR 1 "register_operand" "%0,d,d,d,0")
+ (match_operand:GPR 2 "uns_arith_operand" "d,Uub8,K,d,K")))]
"TARGET_MIPS16"
"@
xor\t%0,%2
cmpi\t%1,%2
cmpi\t%1,%2
- cmp\t%1,%2"
+ cmp\t%1,%2
+ xori\t%0,%x2"
[(set_attr "alu_type" "xor")
(set_attr "mode" "<MODE>")
- (set_attr "extended_mips16" "no,no,yes,no")])
+ (set_attr "extended_mips16" "no,no,yes,no,yes")
+ (set (attr "enabled")
+ (cond [(and (eq_attr "alternative" "4")
+ (not (match_test "ISA_HAS_MIPS16E2")))
+ (const_string "no")]
+ (const_string "yes")))])
(define_insn "*nor<mode>3"
[(set (match_operand:GPR 0 "register_operand" "=d")
@@ -4342,6 +4395,7 @@
INTVAL (operands[3]))"
"<d>ext\t%0,%1,%3,%2"
[(set_attr "type" "arith")
+ (set_attr "extended_mips16" "yes")
(set_attr "mode" "<MODE>")])
(define_insn "*extzv_truncsi_exts"
@@ -4392,6 +4446,7 @@
INTVAL (operands[2]))"
"<d>ins\t%0,%z3,%2,%1"
[(set_attr "type" "arith")
+ (set_attr "extended_mips16" "yes")
(set_attr "mode" "<MODE>")])
;; Combiner pattern for cins (clear and insert bit field). We can
diff --git a/gcc/config/mips/predicates.md b/gcc/config/mips/predicates.md
index e2cd5a8c65f..eabe322cc1d 100644
--- a/gcc/config/mips/predicates.md
+++ b/gcc/config/mips/predicates.md
@@ -170,6 +170,10 @@
(and (match_code "const_int")
(match_test "UINTVAL (op) == 0xffffffff")))
+(define_predicate "bit_clear_operand"
+ (and (match_code "const_int")
+ (match_test "mips_bit_clear_p (mode, INTVAL (op))")))
+
(define_predicate "and_load_operand"
(ior (match_operand 0 "qi_mask_operand")
(match_operand 0 "hi_mask_operand")
@@ -184,8 +188,15 @@
(ior (match_operand 0 "register_operand")
(and (not (match_test "TARGET_MIPS16"))
(match_operand 0 "const_uns_arith_operand"))
+ (and (match_test "ISA_HAS_MIPS16E2")
+ (match_operand 0 "const_uns_arith_operand")
+ (not (match_operand 0 "hi_mask_operand"))
+ (not (match_operand 0 "qi_mask_operand")))
+ (and (match_test "ISA_HAS_MIPS16E2")
+ (match_operand 0 "const_uns_arith_operand"))
(match_operand 0 "low_bitmask_operand")
- (match_operand 0 "si_mask_operand")))
+ (match_operand 0 "si_mask_operand")
+ (match_operand 0 "bit_clear_operand")))
(define_predicate "and_operand"
(ior (match_operand 0 "and_load_operand")
diff --git a/gcc/testsuite/gcc.target/mips/mips16e2.c b/gcc/testsuite/gcc.target/mips/mips16e2.c
new file mode 100644
index 00000000000..ce8b4f1819b
--- /dev/null
+++ b/gcc/testsuite/gcc.target/mips/mips16e2.c
@@ -0,0 +1,102 @@
+/* { dg-options "-mno-abicalls -mgpopt -G8 -mabi=32 -mips16 -mmips16e2" } */
+/* { dg-skip-if "per-function expected output" { *-*-* } { "-flto" } { "" } } */
+
+/* ANDI is a two operand instruction. Hence, it won't be generated if src and
+ * dest are in different registers. */
+
+/* { dg-final { scan-assembler "test01:.*\tandi\t.*test01\n" } } */
+unsigned int
+test01 (unsigned int a)
+{
+ return ((a + 0x2) & 0x3ff);
+}
+
+/* Test EXT */
+
+/* { dg-final { scan-assembler "test02:.*\text\t.*test02\n" } } */
+struct
+{
+ unsigned int a:9;
+ unsigned int d:31;
+ unsigned int e:9;
+ unsigned int f:10;
+} t02;
+
+unsigned int
+test02 (void)
+{
+ return t02.f;
+}
+
+/* Use EXT when ANDing with low-order bitmasks. */
+
+/* { dg-final { scan-assembler "test03:.*\text\t.*test03\n" } } */
+/* { dg-final { scan-assembler-not "test03.*\tandi?\t.*test03\n" } } */
+unsigned int
+test03 (unsigned int x)
+{
+ return (x & 0x1fffffff);
+}
+
+/* Test INS */
+
+/* { dg-final { scan-assembler "test04:.*\tins\t.*test04\n" } } */
+struct
+{
+ unsigned int i : 9;
+ unsigned int j : 15;
+ unsigned int k : 4;
+} s04;
+
+void
+test04 (void)
+{
+ s04.j = 1;
+}
+
+/* Use INS with hardcoded $0. */
+
+/* { dg-final { scan-assembler "test05:.*\tins\t\\\$.*,\\\$0.*test05\n" } } */
+struct
+{
+ unsigned int i : 8;
+ unsigned int j : 9;
+ unsigned int k : 10;
+} __attribute__ ((packed)) s05 __attribute__((aligned(1)));
+
+void
+test05 (void)
+{
+ s05.k = 0;
+}
+
+/* Use INS when ANDing to clear only one consecutive chunk of bits. */
+
+/* { dg-final { scan-assembler "test06:.*\tins\t\\\$.*,\\\$0,11,5.*test06\n" } } */
+/* { dg-final { scan-assembler-not "test06:.*\tandi?\t.*test06\n" } } */
+unsigned int
+test06 (unsigned int x)
+{
+ return (x & 0xffff07ff);
+}
+
+/* ORI is a two operand instruction. Hence, it won't be generated if src and
+ dest are in different registers. */
+
+/* { dg-final { scan-assembler "test07:.*\tori\t.*test07\n" } } */
+unsigned int
+test07 (unsigned int a)
+{
+ return (a + 0x2) | 0x7f0;
+}
+
+/* XORI is a two operand instruction. Hence, it won't be generated if src and
+ dest are in different registers. */
+
+/* { dg-final { scan-assembler "test08:.*\txori\t.*test08\n" } } */
+unsigned int
+test08 (unsigned int a)
+{
+ return ((a + 0x2) ^ 0x3f0);
+}
+
--
2.40.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v3 5/9] MIPS: Add LUI instruction for mips16e2
2023-05-24 9:41 [PATCH v3 0/9] MIPS: Add MIPS16e2 ASE instrucions Jie Mei
` (3 preceding siblings ...)
2023-05-24 9:41 ` [PATCH v3 4/9] MIPS: Add bitwise instructions " Jie Mei
@ 2023-05-24 9:41 ` Jie Mei
2023-05-24 9:41 ` [PATCH v3 6/9] MIPS: Add load/store word left/right instructions " Jie Mei
` (3 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Jie Mei @ 2023-05-24 9:41 UTC (permalink / raw)
To: gcc-patches; +Cc: YunQiang Su, Maciej W . Rozycki
[-- Attachment #1: Type: text/plain, Size: 5192 bytes --]
This patch adds LUI instruction from mips16e2
with corresponding test.
gcc/ChangeLog:
* config/mips/mips.cc(mips_symbol_insns_1): Generates LUI instruction.
(mips_const_insns): Same as above.
(mips_output_move): Same as above.
(mips_output_function_prologue): Same as above.
* config/mips/mips.md: Same as above
gcc/testsuite/ChangeLog:
* gcc.target/mips/mips16e2.c: Add new tests for mips16e2.
---
gcc/config/mips/mips.cc | 44 ++++++++++++++++++------
gcc/config/mips/mips.md | 2 +-
gcc/testsuite/gcc.target/mips/mips16e2.c | 22 ++++++++++++
3 files changed, 56 insertions(+), 12 deletions(-)
diff --git a/gcc/config/mips/mips.cc b/gcc/config/mips/mips.cc
index d86911d10c2..0792f89cab4 100644
--- a/gcc/config/mips/mips.cc
+++ b/gcc/config/mips/mips.cc
@@ -2295,7 +2295,9 @@ mips_symbol_insns_1 (enum mips_symbol_type type, machine_mode mode)
The final address is then $at + %lo(symbol). With 32-bit
symbols we just need a preparatory LUI for normal mode and
a preparatory LI and SLL for MIPS16. */
- return ABI_HAS_64BIT_SYMBOLS ? 6 : TARGET_MIPS16 ? 3 : 2;
+ return ABI_HAS_64BIT_SYMBOLS
+ ? 6
+ : (TARGET_MIPS16 && !ISA_HAS_MIPS16E2) ? 3 : 2;
case SYMBOL_GP_RELATIVE:
/* Treat GP-relative accesses as taking a single instruction on
@@ -2867,7 +2869,7 @@ mips_const_insns (rtx x)
/* This is simply an LUI for normal mode. It is an extended
LI followed by an extended SLL for MIPS16. */
- return TARGET_MIPS16 ? 4 : 1;
+ return TARGET_MIPS16 ? (ISA_HAS_MIPS16E2 ? 2 : 4) : 1;
case CONST_INT:
if (TARGET_MIPS16)
@@ -2879,7 +2881,10 @@ mips_const_insns (rtx x)
: SMALL_OPERAND_UNSIGNED (INTVAL (x)) ? 2
: IN_RANGE (-INTVAL (x), 0, 255) ? 2
: SMALL_OPERAND_UNSIGNED (-INTVAL (x)) ? 3
- : 0);
+ : ISA_HAS_MIPS16E2
+ ? (trunc_int_for_mode (INTVAL (x), SImode) == INTVAL (x)
+ ? 4 : 8)
+ : 0);
return mips_build_integer (codes, INTVAL (x));
@@ -5252,6 +5257,11 @@ mips_output_move (rtx dest, rtx src)
if (!TARGET_MIPS16)
return "li\t%0,%1\t\t\t# %X1";
+ if (ISA_HAS_MIPS16E2
+ && LUI_INT (src)
+ && !SMALL_OPERAND_UNSIGNED (INTVAL (src)))
+ return "lui\t%0,%%hi(%1)\t\t\t# %X1";
+
if (SMALL_OPERAND_UNSIGNED (INTVAL (src)))
return "li\t%0,%1";
@@ -5260,7 +5270,7 @@ mips_output_move (rtx dest, rtx src)
}
if (src_code == HIGH)
- return TARGET_MIPS16 ? "#" : "lui\t%0,%h1";
+ return (TARGET_MIPS16 && !ISA_HAS_MIPS16E2) ? "#" : "lui\t%0,%h1";
if (CONST_GP_P (src))
return "move\t%0,%1";
@@ -11983,13 +11993,25 @@ mips_output_function_prologue (FILE *file)
{
if (TARGET_MIPS16)
{
- /* This is a fixed-form sequence. The position of the
- first two instructions is important because of the
- way _gp_disp is defined. */
- output_asm_insn ("li\t$2,%%hi(_gp_disp)", 0);
- output_asm_insn ("addiu\t$3,$pc,%%lo(_gp_disp)", 0);
- output_asm_insn ("sll\t$2,16", 0);
- output_asm_insn ("addu\t$2,$3", 0);
+ if (ISA_HAS_MIPS16E2)
+ {
+ /* This is a fixed-form sequence. The position of the
+ first two instructions is important because of the
+ way _gp_disp is defined. */
+ output_asm_insn ("lui\t$2,%%hi(_gp_disp)", 0);
+ output_asm_insn ("addiu\t$3,$pc,%%lo(_gp_disp)", 0);
+ output_asm_insn ("addu\t$2,$3", 0);
+ }
+ else
+ {
+ /* This is a fixed-form sequence. The position of the
+ first two instructions is important because of the
+ way _gp_disp is defined. */
+ output_asm_insn ("li\t$2,%%hi(_gp_disp)", 0);
+ output_asm_insn ("addiu\t$3,$pc,%%lo(_gp_disp)", 0);
+ output_asm_insn ("sll\t$2,16", 0);
+ output_asm_insn ("addu\t$2,$3", 0);
+ }
}
else
{
diff --git a/gcc/config/mips/mips.md b/gcc/config/mips/mips.md
index 9f652310aa2..73c9acd484f 100644
--- a/gcc/config/mips/mips.md
+++ b/gcc/config/mips/mips.md
@@ -4634,7 +4634,7 @@
(define_split
[(set (match_operand:P 0 "d_operand")
(high:P (match_operand:P 1 "symbolic_operand_with_high")))]
- "TARGET_MIPS16 && reload_completed"
+ "TARGET_MIPS16 && reload_completed && !ISA_HAS_MIPS16E2"
[(set (match_dup 0) (unspec:P [(match_dup 1)] UNSPEC_UNSHIFTED_HIGH))
(set (match_dup 0) (ashift:P (match_dup 0) (const_int 16)))])
diff --git a/gcc/testsuite/gcc.target/mips/mips16e2.c b/gcc/testsuite/gcc.target/mips/mips16e2.c
index ce8b4f1819b..780891b4056 100644
--- a/gcc/testsuite/gcc.target/mips/mips16e2.c
+++ b/gcc/testsuite/gcc.target/mips/mips16e2.c
@@ -100,3 +100,25 @@ test08 (unsigned int a)
return ((a + 0x2) ^ 0x3f0);
}
+/* Test LUI. */
+
+/* { dg-final { scan-assembler "test09:.*\tlui\t.*test09\n" } } */
+int
+test09 (void)
+{
+ return 0x44440000;
+}
+
+/* Test LUI relocation sequence chang. */
+
+/* { dg-final { scan-assembler "test10:.*\tlui\t.*test10\n" } } */
+int *a10;
+
+int
+test10 (int i)
+{
+ a10 = &i;
+ *a10 = 0x44440000;
+ return i;
+}
+
--
2.40.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v3 6/9] MIPS: Add load/store word left/right instructions for mips16e2
2023-05-24 9:41 [PATCH v3 0/9] MIPS: Add MIPS16e2 ASE instrucions Jie Mei
` (4 preceding siblings ...)
2023-05-24 9:41 ` [PATCH v3 5/9] MIPS: Add LUI instruction " Jie Mei
@ 2023-05-24 9:41 ` Jie Mei
2023-05-24 9:41 ` [PATCH v3 7/9] MIPS: Use ISA_HAS_9BIT_DISPLACEMENT " Jie Mei
` (2 subsequent siblings)
8 siblings, 0 replies; 10+ messages in thread
From: Jie Mei @ 2023-05-24 9:41 UTC (permalink / raw)
To: gcc-patches; +Cc: YunQiang Su, Maciej W . Rozycki
[-- Attachment #1: Type: text/plain, Size: 8703 bytes --]
This patch adds LWL/LWR, SWL/SWR instructions with their
corresponding tests.
gcc/ChangeLog:
* config/mips/mips.cc(mips_expand_ins_as_unaligned_store):
Add logics for generating instruction.
* config/mips/mips.h(ISA_HAS_LWL_LWR): Add clause for ISA_HAS_MIPS16E2.
* config/mips/mips.md(mov_<load>l): Generates instructions.
(mov_<load>r): Same as above.
(mov_<store>l): Adjusted for the conditions above.
(mov_<store>r): Same as above.
(mov_<store>l_mips16e2): Add machine description for `define_insn mov_<store>l_mips16e2`.
(mov_<store>r_mips16e2): Add machine description for `define_insn mov_<store>r_mips16e2`.
gcc/testsuite/ChangeLog:
* gcc.target/mips/mips16e2.c: New tests for mips16e2.
---
gcc/config/mips/mips.cc | 15 ++-
gcc/config/mips/mips.h | 2 +-
gcc/config/mips/mips.md | 43 +++++++--
gcc/testsuite/gcc.target/mips/mips16e2.c | 116 +++++++++++++++++++++++
4 files changed, 168 insertions(+), 8 deletions(-)
diff --git a/gcc/config/mips/mips.cc b/gcc/config/mips/mips.cc
index 0792f89cab4..275efc5a390 100644
--- a/gcc/config/mips/mips.cc
+++ b/gcc/config/mips/mips.cc
@@ -8603,12 +8603,25 @@ mips_expand_ins_as_unaligned_store (rtx dest, rtx src, HOST_WIDE_INT width,
return false;
mode = int_mode_for_size (width, 0).require ();
- src = gen_lowpart (mode, src);
+ if (TARGET_MIPS16
+ && src == const0_rtx)
+ src = force_reg (mode, src);
+ else
+ src = gen_lowpart (mode, src);
+
if (mode == DImode)
{
+ if (TARGET_MIPS16)
+ gcc_unreachable ();
emit_insn (gen_mov_sdl (dest, src, left));
emit_insn (gen_mov_sdr (copy_rtx (dest), copy_rtx (src), right));
}
+ else if (TARGET_MIPS16)
+ {
+ emit_insn (gen_mov_swl_mips16e2 (dest, src, left));
+ emit_insn (gen_mov_swr_mips16e2 (copy_rtx (dest), copy_rtx (src),
+ right));
+ }
else
{
emit_insn (gen_mov_swl (dest, src, left));
diff --git a/gcc/config/mips/mips.h b/gcc/config/mips/mips.h
index eefe2aa0910..b6c100060da 100644
--- a/gcc/config/mips/mips.h
+++ b/gcc/config/mips/mips.h
@@ -1180,7 +1180,7 @@ struct mips_cpu_info {
&& (MODE) == V2SFmode)) \
&& !TARGET_MIPS16)
-#define ISA_HAS_LWL_LWR (mips_isa_rev <= 5 && !TARGET_MIPS16)
+#define ISA_HAS_LWL_LWR (mips_isa_rev <= 5 && (!TARGET_MIPS16 || ISA_HAS_MIPS16E2))
#define ISA_HAS_IEEE_754_LEGACY (mips_isa_rev <= 5)
diff --git a/gcc/config/mips/mips.md b/gcc/config/mips/mips.md
index 73c9acd484f..5ef8d99d99c 100644
--- a/gcc/config/mips/mips.md
+++ b/gcc/config/mips/mips.md
@@ -4488,10 +4488,12 @@
(unspec:GPR [(match_operand:BLK 1 "memory_operand" "m")
(match_operand:QI 2 "memory_operand" "ZC")]
UNSPEC_LOAD_LEFT))]
- "!TARGET_MIPS16 && mips_mem_fits_mode_p (<MODE>mode, operands[1])"
+ "(!TARGET_MIPS16 || ISA_HAS_MIPS16E2)
+ && mips_mem_fits_mode_p (<MODE>mode, operands[1])"
"<load>l\t%0,%2"
[(set_attr "move_type" "load")
- (set_attr "mode" "<MODE>")])
+ (set_attr "mode" "<MODE>")
+ (set_attr "extended_mips16" "yes")])
(define_insn "mov_<load>r"
[(set (match_operand:GPR 0 "register_operand" "=d")
@@ -4499,17 +4501,20 @@
(match_operand:QI 2 "memory_operand" "ZC")
(match_operand:GPR 3 "register_operand" "0")]
UNSPEC_LOAD_RIGHT))]
- "!TARGET_MIPS16 && mips_mem_fits_mode_p (<MODE>mode, operands[1])"
+ "(!TARGET_MIPS16 || ISA_HAS_MIPS16E2)
+ && mips_mem_fits_mode_p (<MODE>mode, operands[1])"
"<load>r\t%0,%2"
[(set_attr "move_type" "load")
- (set_attr "mode" "<MODE>")])
+ (set_attr "mode" "<MODE>")
+ (set_attr "extended_mips16" "yes")])
(define_insn "mov_<store>l"
[(set (match_operand:BLK 0 "memory_operand" "=m")
(unspec:BLK [(match_operand:GPR 1 "reg_or_0_operand" "dJ")
(match_operand:QI 2 "memory_operand" "ZC")]
UNSPEC_STORE_LEFT))]
- "!TARGET_MIPS16 && mips_mem_fits_mode_p (<MODE>mode, operands[0])"
+ "!TARGET_MIPS16
+ && mips_mem_fits_mode_p (<MODE>mode, operands[0])"
"<store>l\t%z1,%2"
[(set_attr "move_type" "store")
(set_attr "mode" "<MODE>")])
@@ -4520,11 +4525,37 @@
(match_operand:QI 2 "memory_operand" "ZC")
(match_dup 0)]
UNSPEC_STORE_RIGHT))]
- "!TARGET_MIPS16 && mips_mem_fits_mode_p (<MODE>mode, operands[0])"
+ "!TARGET_MIPS16
+ && mips_mem_fits_mode_p (<MODE>mode, operands[0])"
"<store>r\t%z1,%2"
[(set_attr "move_type" "store")
(set_attr "mode" "<MODE>")])
+(define_insn "mov_<store>l_mips16e2"
+ [(set (match_operand:BLK 0 "memory_operand" "=m")
+ (unspec:BLK [(match_operand:GPR 1 "register_operand" "d")
+ (match_operand:QI 2 "memory_operand" "ZC")]
+ UNSPEC_STORE_LEFT))]
+ "TARGET_MIPS16 && ISA_HAS_MIPS16E2
+ && mips_mem_fits_mode_p (<MODE>mode, operands[0])"
+ "<store>l\t%1,%2"
+ [(set_attr "move_type" "store")
+ (set_attr "mode" "<MODE>")
+ (set_attr "extended_mips16" "yes")])
+
+(define_insn "mov_<store>r_mips16e2"
+ [(set (match_operand:BLK 0 "memory_operand" "+m")
+ (unspec:BLK [(match_operand:GPR 1 "register_operand" "d")
+ (match_operand:QI 2 "memory_operand" "ZC")
+ (match_dup 0)]
+ UNSPEC_STORE_RIGHT))]
+ "TARGET_MIPS16 && ISA_HAS_MIPS16E2
+ && mips_mem_fits_mode_p (<MODE>mode, operands[0])"
+ "<store>r\t%1,%2"
+ [(set_attr "move_type" "store")
+ (set_attr "mode" "<MODE>")
+ (set_attr "extended_mips16" "yes")])
+
;; Unaligned direct access
(define_expand "movmisalign<mode>"
[(set (match_operand:JOIN_MODE 0)
diff --git a/gcc/testsuite/gcc.target/mips/mips16e2.c b/gcc/testsuite/gcc.target/mips/mips16e2.c
index 780891b4056..166aa742268 100644
--- a/gcc/testsuite/gcc.target/mips/mips16e2.c
+++ b/gcc/testsuite/gcc.target/mips/mips16e2.c
@@ -122,3 +122,119 @@ test10 (int i)
return i;
}
+/* Test 32bit unaligned load. */
+
+/* { dg-final { scan-assembler "test11:.*\tlwl\t.*test11\n" } } */
+/* { dg-final { scan-assembler "test11:.*\tlwr\t.*test11\n" } } */
+struct node11
+{
+ char c;
+ int i;
+} __attribute__ ((packed)) obj11 __attribute__((aligned(1)));
+
+int
+test11 (void)
+{
+ return obj11.i;
+}
+
+/* Test 32bit unaligned load. */
+
+/* { dg-final { scan-assembler "test12:.*\tlwl\t.*test12\n" } } */
+/* { dg-final { scan-assembler "test12:.*\tlwr\t.*test12\n" } } */
+struct node12
+{
+ unsigned int i : 8;
+ unsigned int j : 32;
+} __attribute__ ((packed)) obj12 __attribute__((aligned(16)));
+
+int
+test12 (void)
+{
+ return obj12.j;
+}
+
+/* Test 32bit unaligned store with non-zero constant */
+
+/* { dg-final { scan-assembler "test13:.*\tswl\t.*test13\n" } } */
+/* { dg-final { scan-assembler "test13:.*\tswr\t.*test13\n" } } */
+struct node13
+{
+ char c;
+ int i;
+} __attribute__ ((packed)) obj13 __attribute__((aligned(1)));
+
+void
+test13 (void)
+{
+ obj13.i = 1234;
+}
+
+/* Test 32bit unaligned store with zero constant. */
+
+/* { dg-final { scan-assembler "test14:.*\tswl\t.*test14\n" } } */
+/* { dg-final { scan-assembler "test14:.*\tswr\t.*test14\n" } } */
+/* { dg-final { scan-assembler-not "test14:.*\tswl\t\\\$0,.*test14\n" } } */
+/* { dg-final { scan-assembler-not "test14:.*\tswr\t\\\$0,.*test14\n" } } */
+struct node14
+{
+ char c;
+ int i;
+} __attribute__ ((packed)) obj14 __attribute__((aligned(1)));
+
+void
+test14 (void)
+{
+ obj14.i = 0;
+}
+
+/* Test 32bit unaligned store with non-constant. */
+
+/* { dg-final { scan-assembler "test15:.*\tswl\t.*test15\n" } } */
+/* { dg-final { scan-assembler "test15:.*\tswr\t.*test15\n" } } */
+struct node15
+{
+ char c;
+ int i;
+} __attribute__ ((packed)) obj15 __attribute__((aligned(1)));
+
+int i15 = 1234;
+
+void
+test15 (void)
+{
+ obj15.i = i15;
+}
+
+/* Test 32bit unaligned store with non-constant */
+
+/* { dg-final { scan-assembler "test16:.*\tswl\t.*test16\n" } } */
+/* { dg-final { scan-assembler "test16:.*\tswr\t.*test16\n" } } */
+struct node16
+{
+ char c;
+ int i;
+} __attribute__ ((packed)) obj16 __attribute__((aligned(1)));
+
+void
+test16 (int i)
+{
+ obj16.i = i;
+}
+
+/* Test 32bit unaligned store with non-constant. */
+
+/* { dg-final { scan-assembler "test17:.*\tswl\t.*test17\n" } } */
+/* { dg-final { scan-assembler "test17:.*\tswr\t.*test17\n" } } */
+struct node17
+{
+ unsigned int i : 8;
+ unsigned int j : 32;
+} __attribute__ ((packed)) obj17 __attribute__((aligned(16)));
+
+void
+test17 (int i)
+{
+ obj17.j = i;
+}
+
--
2.40.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v3 7/9] MIPS: Use ISA_HAS_9BIT_DISPLACEMENT for mips16e2
2023-05-24 9:41 [PATCH v3 0/9] MIPS: Add MIPS16e2 ASE instrucions Jie Mei
` (5 preceding siblings ...)
2023-05-24 9:41 ` [PATCH v3 6/9] MIPS: Add load/store word left/right instructions " Jie Mei
@ 2023-05-24 9:41 ` Jie Mei
2023-05-24 9:41 ` [PATCH v3 8/9] MIPS: Add CACHE instruction " Jie Mei
2023-05-24 9:41 ` [PATCH v3 9/9] MIPS: Make mips16e2 generating ZEB/ZEH instead of ANDI under certain conditions Jie Mei
8 siblings, 0 replies; 10+ messages in thread
From: Jie Mei @ 2023-05-24 9:41 UTC (permalink / raw)
To: gcc-patches; +Cc: YunQiang Su, Maciej W . Rozycki
[-- Attachment #1: Type: text/plain, Size: 2005 bytes --]
The MIPS16e2 ASE has PREF, LL and SC instructions,
they use 9 bits immediate, like mips32r6.
The MIPS32 PRE-R6 uses 16 bits immediate.
gcc/ChangeLog:
* config/mips/mips.h(ISA_HAS_9BIT_DISPLACEMENT): Add clause
for ISA_HAS_MIPS16E2.
(ISA_HAS_SYNC): Same as above.
(ISA_HAS_LL_SC): Same as above.
---
gcc/config/mips/mips.h | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/gcc/config/mips/mips.h b/gcc/config/mips/mips.h
index b6c100060da..f50b279af33 100644
--- a/gcc/config/mips/mips.h
+++ b/gcc/config/mips/mips.h
@@ -1247,7 +1247,8 @@ struct mips_cpu_info {
&& !TARGET_MIPS16)
/* ISA has data prefetch, LL and SC with limited 9-bit displacement. */
-#define ISA_HAS_9BIT_DISPLACEMENT (mips_isa_rev >= 6)
+#define ISA_HAS_9BIT_DISPLACEMENT (mips_isa_rev >= 6 \
+ || ISA_HAS_MIPS16E2)
/* ISA has data indexed prefetch instructions. This controls use of
'prefx', along with TARGET_HARD_FLOAT and TARGET_DOUBLE_FLOAT.
@@ -1340,7 +1341,8 @@ struct mips_cpu_info {
#define ISA_HAS_SYNCI (mips_isa_rev >= 2 && !TARGET_MIPS16)
/* ISA includes sync. */
-#define ISA_HAS_SYNC ((mips_isa >= MIPS_ISA_MIPS2 || TARGET_MIPS3900) && !TARGET_MIPS16)
+#define ISA_HAS_SYNC ((mips_isa >= MIPS_ISA_MIPS2 || TARGET_MIPS3900) \
+ && (!TARGET_MIPS16 || ISA_HAS_MIPS16E2))
#define GENERATE_SYNC \
(target_flags_explicit & MASK_LLSC \
? TARGET_LLSC && !TARGET_MIPS16 \
@@ -1349,7 +1351,8 @@ struct mips_cpu_info {
/* ISA includes ll and sc. Note that this implies ISA_HAS_SYNC
because the expanders use both ISA_HAS_SYNC and ISA_HAS_LL_SC
instructions. */
-#define ISA_HAS_LL_SC (mips_isa >= MIPS_ISA_MIPS2 && !TARGET_MIPS5900 && !TARGET_MIPS16)
+#define ISA_HAS_LL_SC (mips_isa >= MIPS_ISA_MIPS2 && !TARGET_MIPS5900 \
+ && (!TARGET_MIPS16 || ISA_HAS_MIPS16E2))
#define GENERATE_LL_SC \
(target_flags_explicit & MASK_LLSC \
? TARGET_LLSC && !TARGET_MIPS16 \
--
2.40.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v3 8/9] MIPS: Add CACHE instruction for mips16e2
2023-05-24 9:41 [PATCH v3 0/9] MIPS: Add MIPS16e2 ASE instrucions Jie Mei
` (6 preceding siblings ...)
2023-05-24 9:41 ` [PATCH v3 7/9] MIPS: Use ISA_HAS_9BIT_DISPLACEMENT " Jie Mei
@ 2023-05-24 9:41 ` Jie Mei
2023-05-24 9:41 ` [PATCH v3 9/9] MIPS: Make mips16e2 generating ZEB/ZEH instead of ANDI under certain conditions Jie Mei
8 siblings, 0 replies; 10+ messages in thread
From: Jie Mei @ 2023-05-24 9:41 UTC (permalink / raw)
To: gcc-patches; +Cc: YunQiang Su, Maciej W . Rozycki
[-- Attachment #1: Type: text/plain, Size: 6131 bytes --]
This patch adds CACHE instruction from mips16e2
with corresponding tests.
gcc/ChangeLog:
* config/mips/mips.c(mips_9bit_offset_address_p): Restrict the
address register to M16_REGS for MIPS16.
(BUILTIN_AVAIL_MIPS16E2): Defined a new macro.
(AVAIL_MIPS16E2_OR_NON_MIPS16): Same as above.
(AVAIL_NON_MIPS16 (cache..)): Update to
AVAIL_MIPS16E2_OR_NON_MIPS16.
* config/mips/mips.h (ISA_HAS_CACHE): Add clause for ISA_HAS_MIPS16E2.
* config/mips/mips.md (mips_cache): Mark as extended MIPS16.
gcc/testsuite/ChangeLog:
* gcc.target/mips/mips16e2-cache.c: New tests for mips16e2.
---
gcc/config/mips/mips.cc | 25 ++++++++++++--
gcc/config/mips/mips.h | 3 +-
gcc/config/mips/mips.md | 3 +-
.../gcc.target/mips/mips16e2-cache.c | 34 +++++++++++++++++++
4 files changed, 60 insertions(+), 5 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/mips/mips16e2-cache.c
diff --git a/gcc/config/mips/mips.cc b/gcc/config/mips/mips.cc
index 275efc5a390..e6f4701ad3a 100644
--- a/gcc/config/mips/mips.cc
+++ b/gcc/config/mips/mips.cc
@@ -2845,6 +2845,9 @@ mips_9bit_offset_address_p (rtx x, machine_mode mode)
return (mips_classify_address (&addr, x, mode, false)
&& addr.type == ADDRESS_REG
&& CONST_INT_P (addr.offset)
+ && (!TARGET_MIPS16E2
+ || M16_REG_P (REGNO (addr.reg))
+ || REGNO (addr.reg) >= FIRST_PSEUDO_REGISTER)
&& MIPS_9BIT_OFFSET_P (INTVAL (addr.offset)));
}
@@ -15412,9 +15415,13 @@ mips_loongson_ext2_prefetch_cookie (rtx write, rtx)
The function is available on the current target if !TARGET_MIPS16.
BUILTIN_AVAIL_MIPS16
- The function is available on the current target if TARGET_MIPS16. */
+ The function is available on the current target if TARGET_MIPS16.
+
+ BUILTIN_AVAIL_MIPS16E2
+ The function is available on the current target if TARGET_MIPS16E2. */
#define BUILTIN_AVAIL_NON_MIPS16 1
#define BUILTIN_AVAIL_MIPS16 2
+#define BUILTIN_AVAIL_MIPS16E2 4
/* Declare an availability predicate for built-in functions that
require non-MIPS16 mode and also require COND to be true.
@@ -15426,6 +15433,17 @@ mips_loongson_ext2_prefetch_cookie (rtx write, rtx)
return (COND) ? BUILTIN_AVAIL_NON_MIPS16 : 0; \
}
+/* Declare an availability predicate for built-in functions that
+ require non-MIPS16 mode or MIPS16E2 and also require COND to be true.
+ NAME is the main part of the predicate's name. */
+#define AVAIL_MIPS16E2_OR_NON_MIPS16(NAME, COND) \
+ static unsigned int \
+ mips_builtin_avail_##NAME (void) \
+ { \
+ return ((COND) ? BUILTIN_AVAIL_NON_MIPS16 | BUILTIN_AVAIL_MIPS16E2 \
+ : 0); \
+ }
+
/* Declare an availability predicate for built-in functions that
support both MIPS16 and non-MIPS16 code and also require COND
to be true. NAME is the main part of the predicate's name. */
@@ -15471,7 +15489,7 @@ AVAIL_NON_MIPS16 (dsp_32, !TARGET_64BIT && TARGET_DSP)
AVAIL_NON_MIPS16 (dsp_64, TARGET_64BIT && TARGET_DSP)
AVAIL_NON_MIPS16 (dspr2_32, !TARGET_64BIT && TARGET_DSPR2)
AVAIL_NON_MIPS16 (loongson, TARGET_LOONGSON_MMI)
-AVAIL_NON_MIPS16 (cache, TARGET_CACHE_BUILTIN)
+AVAIL_MIPS16E2_OR_NON_MIPS16 (cache, TARGET_CACHE_BUILTIN)
AVAIL_NON_MIPS16 (msa, TARGET_MSA)
/* Construct a mips_builtin_description from the given arguments.
@@ -17471,7 +17489,8 @@ mips_expand_builtin (tree exp, rtx target, rtx subtarget ATTRIBUTE_UNUSED,
d = &mips_builtins[fcode];
avail = d->avail ();
gcc_assert (avail != 0);
- if (TARGET_MIPS16 && !(avail & BUILTIN_AVAIL_MIPS16))
+ if (TARGET_MIPS16 && !(avail & BUILTIN_AVAIL_MIPS16)
+ && (!TARGET_MIPS16E2 || !(avail & BUILTIN_AVAIL_MIPS16E2)))
{
error ("built-in function %qE not supported for MIPS16",
DECL_NAME (fndecl));
diff --git a/gcc/config/mips/mips.h b/gcc/config/mips/mips.h
index f50b279af33..c29c5a8543d 100644
--- a/gcc/config/mips/mips.h
+++ b/gcc/config/mips/mips.h
@@ -1385,7 +1385,8 @@ struct mips_cpu_info {
#define TARGET_CACHE_BUILTIN (mips_isa >= MIPS_ISA_MIPS3)
/* The CACHE instruction is available. */
-#define ISA_HAS_CACHE (TARGET_CACHE_BUILTIN && !TARGET_MIPS16)
+#define ISA_HAS_CACHE (TARGET_CACHE_BUILTIN && (!TARGET_MIPS16 \
+ || TARGET_MIPS16E2))
\f
/* Tell collect what flags to pass to nm. */
#ifndef NM_FLAGS
diff --git a/gcc/config/mips/mips.md b/gcc/config/mips/mips.md
index 5ef8d99d99c..7eb65891820 100644
--- a/gcc/config/mips/mips.md
+++ b/gcc/config/mips/mips.md
@@ -5751,7 +5751,8 @@
(match_operand:QI 1 "address_operand" "ZD")]
UNSPEC_MIPS_CACHE))]
"ISA_HAS_CACHE"
- "cache\t%X0,%a1")
+ "cache\t%X0,%a1"
+ [(set_attr "extended_mips16" "yes")])
;; Similar, but with the operands hard-coded to an R10K cache barrier
;; operation. We keep the pattern distinct so that we can identify
diff --git a/gcc/testsuite/gcc.target/mips/mips16e2-cache.c b/gcc/testsuite/gcc.target/mips/mips16e2-cache.c
new file mode 100644
index 00000000000..dcc39b580f5
--- /dev/null
+++ b/gcc/testsuite/gcc.target/mips/mips16e2-cache.c
@@ -0,0 +1,34 @@
+/* { dg-options "-mno-abicalls -mgpopt -G8 -mabi=32 -mips32r2 -mips16 -mmips16e2" } */
+/* { dg-skip-if "naming registers makes this a code quality test" { *-*-* } { "-O0" } { "" } } */
+
+/* Test cache. */
+
+void
+test01 (int *area)
+{
+ __builtin_mips_cache (20, area);
+}
+
+void
+test02 (const short *area)
+{
+ __builtin_mips_cache (24, area + 10);
+}
+
+void
+test03 (volatile unsigned int *area, int offset)
+{
+ __builtin_mips_cache (0, area + offset);
+}
+
+void
+test04 (const volatile unsigned char *area)
+{
+ __builtin_mips_cache (4, area - 80);
+}
+
+/* { dg-final { scan-assembler "\tcache\t0x14,0\\(\\\$4\\)" } } */
+/* { dg-final { scan-assembler "\tcache\t0x18,20\\(\\\$4\\)" } } */
+/* { dg-final { scan-assembler "\tcache\t(0x|)0,0\\(\\\$.\\)" } } */
+/* { dg-final { scan-assembler "\tcache\t0x4,-80\\(\\\$4\\)" } } */
+
--
2.40.1
^ permalink raw reply [flat|nested] 10+ messages in thread* [PATCH v3 9/9] MIPS: Make mips16e2 generating ZEB/ZEH instead of ANDI under certain conditions
2023-05-24 9:41 [PATCH v3 0/9] MIPS: Add MIPS16e2 ASE instrucions Jie Mei
` (7 preceding siblings ...)
2023-05-24 9:41 ` [PATCH v3 8/9] MIPS: Add CACHE instruction " Jie Mei
@ 2023-05-24 9:41 ` Jie Mei
8 siblings, 0 replies; 10+ messages in thread
From: Jie Mei @ 2023-05-24 9:41 UTC (permalink / raw)
To: gcc-patches; +Cc: YunQiang Su, Maciej W . Rozycki
[-- Attachment #1: Type: text/plain, Size: 2842 bytes --]
This patch allows mips16e2 acts the same with -O1~3
when generating ZEB/ZEH instead of ANDI under
the -O0 option, which shrinks the code size.
gcc/ChangeLog:
* config/mips/mips.md(*and<mode>3_mips16): Generates
ZEB/ZEH instructions.
---
gcc/config/mips/mips.md | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
diff --git a/gcc/config/mips/mips.md b/gcc/config/mips/mips.md
index 7eb65891820..85ed1735d83 100644
--- a/gcc/config/mips/mips.md
+++ b/gcc/config/mips/mips.md
@@ -3357,9 +3357,9 @@
(set_attr "mode" "<MODE>")])
(define_insn "*and<mode>3_mips16"
- [(set (match_operand:GPR 0 "register_operand" "=d,d,d,d,d,d,d,d")
- (and:GPR (match_operand:GPR 1 "nonimmediate_operand" "%W,W,W,d,0,d,0,0?")
- (match_operand:GPR 2 "and_operand" "Yb,Yh,Yw,Yw,d,Yx,Yz,K")))]
+ [(set (match_operand:GPR 0 "register_operand" "=d,d,d,d,d,d,d,d,d,d")
+ (and:GPR (match_operand:GPR 1 "nonimmediate_operand" "%0,0,W,W,W,d,0,d,0,0?")
+ (match_operand:GPR 2 "and_operand" "Yb,Yh,Yb,Yh,Yw,Yw,d,Yx,Yz,K")))]
"TARGET_MIPS16 && and_operands_ok (<MODE>mode, operands[1], operands[2])"
{
int len;
@@ -3368,38 +3368,42 @@
switch (which_alternative)
{
case 0:
+ return "zeb\t%0";
+ case 1:
+ return "zeh\t%0";
+ case 2:
operands[1] = gen_lowpart (QImode, operands[1]);
return "lbu\t%0,%1";
- case 1:
+ case 3:
operands[1] = gen_lowpart (HImode, operands[1]);
return "lhu\t%0,%1";
- case 2:
+ case 4:
operands[1] = gen_lowpart (SImode, operands[1]);
return "lwu\t%0,%1";
- case 3:
+ case 5:
return "#";
- case 4:
+ case 6:
return "and\t%0,%2";
- case 5:
+ case 7:
len = low_bitmask_len (<MODE>mode, INTVAL (operands[2]));
operands[2] = GEN_INT (len);
return "ext\t%0,%1,0,%2";
- case 6:
+ case 8:
mips_bit_clear_info (<MODE>mode, INTVAL (operands[2]), &pos, &len);
operands[1] = GEN_INT (pos);
operands[2] = GEN_INT (len);
return "ins\t%0,$0,%1,%2";
- case 7:
+ case 9:
return "andi\t%0,%x2";
default:
gcc_unreachable ();
}
}
- [(set_attr "move_type" "load,load,load,shift_shift,logical,ext_ins,ext_ins,andi")
+ [(set_attr "move_type" "andi,andi,load,load,load,shift_shift,logical,ext_ins,ext_ins,andi")
(set_attr "mode" "<MODE>")
- (set_attr "extended_mips16" "no,no,no,no,no,yes,yes,yes")
+ (set_attr "extended_mips16" "no,no,no,no,no,no,no,yes,yes,yes")
(set (attr "enabled")
- (cond [(and (eq_attr "alternative" "7")
+ (cond [(and (eq_attr "alternative" "9")
(not (match_test "ISA_HAS_MIPS16E2")))
(const_string "no")
(and (eq_attr "alternative" "0,1")
--
2.40.1
^ permalink raw reply [flat|nested] 10+ messages in thread