From: Richard Sandiford <richard.sandiford@arm.com>
To: binutils@sourceware.org
Cc: Richard Sandiford <richard.sandiford@arm.com>
Subject: [PATCH 11/43] aarch64: Consolidate ZA tile range checks
Date: Thu, 30 Mar 2023 11:23:27 +0100 [thread overview]
Message-ID: <20230330102359.3327695-12-richard.sandiford@arm.com> (raw)
In-Reply-To: <20230330102359.3327695-1-richard.sandiford@arm.com>
Now that all parsing of ZA tile names goes through parse_typed_reg,
we can check there for out-of-range tile numbers. The other check
performed by parse_sme_zada_operand was to reject .q, but that can
now be done via F_STRICT instead. (.q tiles are valid in other
contexts, so they shouldn't be rejected in parse_typed_reg.)
---
gas/config/tc-aarch64.c | 106 +++++----------------
gas/testsuite/gas/aarch64/sme-2-illegal.l | 8 +-
gas/testsuite/gas/aarch64/sme-3-illegal.l | 8 +-
gas/testsuite/gas/aarch64/sme-5-illegal.l | 30 +++---
gas/testsuite/gas/aarch64/sme-6-illegal.l | 30 +++---
gas/testsuite/gas/aarch64/sme-illegal.l | 108 +++++++++++++---------
6 files changed, 127 insertions(+), 163 deletions(-)
diff --git a/gas/config/tc-aarch64.c b/gas/config/tc-aarch64.c
index f9e85b3d803..5fb88f75a62 100644
--- a/gas/config/tc-aarch64.c
+++ b/gas/config/tc-aarch64.c
@@ -134,6 +134,7 @@ struct vector_type_el
{
enum vector_el_type type;
unsigned char defined;
+ unsigned element_size;
unsigned width;
int64_t index;
};
@@ -966,6 +967,7 @@ parse_vector_type_for_operand (aarch64_reg_type reg_type,
parsed_type->type = type;
parsed_type->width = width;
+ parsed_type->element_size = element_size;
*str = ptr;
@@ -1056,6 +1058,7 @@ parse_typed_reg (char **ccp, aarch64_reg_type type,
atype.defined = 0;
atype.type = NT_invtype;
atype.width = -1;
+ atype.element_size = 0;
atype.index = 0;
if (reg == NULL)
@@ -1080,6 +1083,14 @@ parse_typed_reg (char **ccp, aarch64_reg_type type,
{
if (!parse_vector_type_for_operand (type, &parsetype, &str))
return NULL;
+ if ((reg->type == REG_TYPE_ZAT
+ || reg->type == REG_TYPE_ZATH
+ || reg->type == REG_TYPE_ZATV)
+ && reg->number * 8 >= parsetype.element_size)
+ {
+ set_syntax_error (_("ZA tile number out of range"));
+ return NULL;
+ }
}
else
{
@@ -1182,10 +1193,11 @@ aarch64_reg_parse (char **ccp, aarch64_reg_type type,
static inline bool
eq_vector_type_el (struct vector_type_el e1, struct vector_type_el e2)
{
- return
- e1.type == e2.type
- && e1.defined == e2.defined
- && e1.width == e2.width && e1.index == e2.index;
+ return (e1.type == e2.type
+ && e1.defined == e2.defined
+ && e1.width == e2.width
+ && e1.element_size == e2.element_size
+ && e1.index == e2.index);
}
/* This function parses a list of vector registers of type TYPE.
@@ -1234,6 +1246,7 @@ parse_vector_reg_list (char **ccp, aarch64_reg_type type,
typeinfo_first.defined = 0;
typeinfo_first.type = NT_invtype;
typeinfo_first.width = -1;
+ typeinfo_first.element_size = 0;
typeinfo_first.index = 0;
ret_val = 0;
val = -1;
@@ -4343,63 +4356,6 @@ parse_reg_with_qual (char **str, aarch64_reg_type reg_type,
return reg;
}
-/* Parse SME ZA tile encoded in <ZAda> assembler symbol.
- Function return tile QUALIFIER on success.
-
- Tiles are in example format: za[0-9]\.[bhsd]
-
- Function returns <ZAda> register number or PARSE_FAIL.
-*/
-static int
-parse_sme_zada_operand (char **str, aarch64_opnd_qualifier_t *qualifier)
-{
- int regno;
- const reg_entry *reg = parse_reg_with_qual (str, REG_TYPE_ZAT, qualifier);
-
- if (reg == NULL)
- return PARSE_FAIL;
- regno = reg->number;
-
- switch (*qualifier)
- {
- case AARCH64_OPND_QLF_S_B:
- if (regno != 0x00)
- {
- set_syntax_error (_("invalid ZA tile register number, expected za0"));
- return PARSE_FAIL;
- }
- break;
- case AARCH64_OPND_QLF_S_H:
- if (regno > 0x01)
- {
- set_syntax_error (_("invalid ZA tile register number, expected za0-za1"));
- return PARSE_FAIL;
- }
- break;
- case AARCH64_OPND_QLF_S_S:
- if (regno > 0x03)
- {
- /* For the 32-bit variant: is the name of the ZA tile ZA0-ZA3. */
- set_syntax_error (_("invalid ZA tile register number, expected za0-za3"));
- return PARSE_FAIL;
- }
- break;
- case AARCH64_OPND_QLF_S_D:
- if (regno > 0x07)
- {
- /* For the 64-bit variant: is the name of the ZA tile ZA0-ZA7 */
- set_syntax_error (_("invalid ZA tile register number, expected za0-za7"));
- return PARSE_FAIL;
- }
- break;
- default:
- set_syntax_error (_("invalid ZA tile element size, allowed b, h, s and d"));
- return PARSE_FAIL;
- }
-
- return regno;
-}
-
/* Parse STR for unsigned, immediate (1-2 digits) in format:
#<imm>
@@ -4498,7 +4454,6 @@ parse_sme_za_hv_tiles_operand (char **str,
aarch64_opnd_qualifier_t *qualifier)
{
int regno;
- int regno_limit;
int64_t imm_limit;
int64_t imm_value;
const reg_entry *reg;
@@ -4515,23 +4470,18 @@ parse_sme_za_hv_tiles_operand (char **str,
switch (*qualifier)
{
case AARCH64_OPND_QLF_S_B:
- regno_limit = 0;
imm_limit = 15;
break;
case AARCH64_OPND_QLF_S_H:
- regno_limit = 1;
imm_limit = 7;
break;
case AARCH64_OPND_QLF_S_S:
- regno_limit = 3;
imm_limit = 3;
break;
case AARCH64_OPND_QLF_S_D:
- regno_limit = 7;
imm_limit = 1;
break;
case AARCH64_OPND_QLF_S_Q:
- regno_limit = 15;
imm_limit = 0;
break;
default:
@@ -4539,14 +4489,6 @@ parse_sme_za_hv_tiles_operand (char **str,
return PARSE_FAIL;
}
- /* Check if destination register ZA tile vector is in range for given
- instruction variant. */
- if (regno < 0 || regno > regno_limit)
- {
- set_syntax_error (_("ZA tile vector out of range"));
- return PARSE_FAIL;
- }
-
if (!parse_sme_za_hv_tiles_operand_index (str, vector_select_register,
&imm_value))
return PARSE_FAIL;
@@ -4621,16 +4563,16 @@ parse_sme_zero_mask(char **str)
if (reg)
{
int regno = reg->number;
- if (qualifier == AARCH64_OPND_QLF_S_B && regno == 0)
+ if (qualifier == AARCH64_OPND_QLF_S_B)
{
/* { ZA0.B } is assembled as all-ones immediate. */
mask = 0xff;
}
- else if (qualifier == AARCH64_OPND_QLF_S_H && regno < 2)
+ else if (qualifier == AARCH64_OPND_QLF_S_H)
mask |= 0x55 << regno;
- else if (qualifier == AARCH64_OPND_QLF_S_S && regno < 4)
+ else if (qualifier == AARCH64_OPND_QLF_S_S)
mask |= 0x11 << regno;
- else if (qualifier == AARCH64_OPND_QLF_S_D && regno < 8)
+ else if (qualifier == AARCH64_OPND_QLF_S_D)
mask |= 0x01 << regno;
else
{
@@ -7546,10 +7488,10 @@ parse_operands (char *str, const aarch64_opcode *opcode)
case AARCH64_OPND_SME_ZAda_2b:
case AARCH64_OPND_SME_ZAda_3b:
- val = parse_sme_zada_operand (&str, &qualifier);
- if (val == PARSE_FAIL)
+ reg = parse_reg_with_qual (&str, REG_TYPE_ZAT, &qualifier);
+ if (!reg)
goto failure;
- info->reg.regno = val;
+ info->reg.regno = reg->number;
info->qualifier = qualifier;
break;
diff --git a/gas/testsuite/gas/aarch64/sme-2-illegal.l b/gas/testsuite/gas/aarch64/sme-2-illegal.l
index d36456175fe..994c6f15951 100644
--- a/gas/testsuite/gas/aarch64/sme-2-illegal.l
+++ b/gas/testsuite/gas/aarch64/sme-2-illegal.l
@@ -1,8 +1,8 @@
[^:]*: Assembler messages:
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 3 -- `mova z0\.b,p0/m,za1h\.b\[w12,#0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 3 -- `mova z0\.h,p0/m,za2h\.h\[w12,#0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 3 -- `mova z0\.s,p0/m,za4h\.s\[w12,#0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 3 -- `mova z0\.d,p0/m,za8h\.d\[w12,#0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 3 -- `mova z0\.b,p0/m,za1h\.b\[w12,#0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 3 -- `mova z0\.h,p0/m,za2h\.h\[w12,#0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 3 -- `mova z0\.s,p0/m,za4h\.s\[w12,#0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 3 -- `mova z0\.d,p0/m,za8h\.d\[w12,#0\]'
[^:]*:[0-9]+: Error: operand 3 must be an SME horizontal or vertical vector access register -- `mova z0\.q,p0/m,za16h.q\[w12\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 3 -- `mova z31\.b,p7/m,za0v\.b\[w15,#16\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 3 -- `mova z31\.h,p7/m,za1v\.h\[w15,#8\]'
diff --git a/gas/testsuite/gas/aarch64/sme-3-illegal.l b/gas/testsuite/gas/aarch64/sme-3-illegal.l
index 8babf4c7251..6b2791d6267 100644
--- a/gas/testsuite/gas/aarch64/sme-3-illegal.l
+++ b/gas/testsuite/gas/aarch64/sme-3-illegal.l
@@ -1,8 +1,8 @@
[^:]*: Assembler messages:
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `mova za1v\.b\[w12,#0\],p0/m,z0.b'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `mova za2v\.h\[w12,#0\],p0/m,z0.h'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `mova za4v\.s\[w12,#0\],p0/m,z0.s'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `mova za8v\.d\[w12,#0\],p0/m,z0.d'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `mova za1v\.b\[w12,#0\],p0/m,z0.b'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `mova za2v\.h\[w12,#0\],p0/m,z0.h'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `mova za4v\.s\[w12,#0\],p0/m,z0.s'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `mova za8v\.d\[w12,#0\],p0/m,z0.d'
[^:]*:[0-9]+: Error: operand 1 must be an SME horizontal or vertical vector access register -- `mova za16v\.q\[w12\],p0/m,z0.q'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `mova za0v\.b\[w15,#16\],p7/m,z31.b'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `mova za1v\.h\[w15,#8\],p7/m,z31.h'
diff --git a/gas/testsuite/gas/aarch64/sme-5-illegal.l b/gas/testsuite/gas/aarch64/sme-5-illegal.l
index c2f8bc92dd8..ec1e989df5b 100644
--- a/gas/testsuite/gas/aarch64/sme-5-illegal.l
+++ b/gas/testsuite/gas/aarch64/sme-5-illegal.l
@@ -5,32 +5,32 @@
[^:]*:[0-9]+: Error: '\]' expected at operand 3 -- `ld1w {za3v.s\[w15,3\]},p7/z,\[sp,lsl#2\]'
[^:]*:[0-9]+: Error: invalid addressing mode at operand 3 -- `ld1d {za0h.d\[w12,0\]},p0/z,\[sp,x0,lsl#12\]'
[^:]*:[0-9]+: Error: expected ',' at operand 1 -- `ld1q {za0v.q\[w12\]},p0/z,\[x0,x0,lsl#2\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1b {za1h.b\[w12,0\]},p0/z,\[x0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1b {za1v.b\[w12,0\]},p0/z,\[sp\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1b {za1h.b\[w12,0\]},p0/z,\[sp,x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1b {za1h.b\[w12,0\]},p0/z,\[x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1b {za1v.b\[w12,0\]},p0/z,\[sp\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1b {za1h.b\[w12,0\]},p0/z,\[sp,x0\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1b {za0v.b\[w15,16\]},p7/z,\[x17\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1b {za0h.b\[w15,16\]},p7/z,\[sp\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1b {za0v.b\[w15,16\]},p7/z,\[sp,x17\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1h {za2v.h\[w12,0\]},p0/z,\[x0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1h {za2h.h\[w12,0\]},p0/z,\[sp\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1h {za2v.h\[w12,0\]},p0/z,\[x0,x0,lsl#1\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1h {za2h.h\[w12,0\]},p0/z,\[sp,x0,lsl#1\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1h {za2v.h\[w12,0\]},p0/z,\[x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1h {za2h.h\[w12,0\]},p0/z,\[sp\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1h {za2v.h\[w12,0\]},p0/z,\[x0,x0,lsl#1\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1h {za2h.h\[w12,0\]},p0/z,\[sp,x0,lsl#1\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1h {za1v.h\[w15,8\]},p7/z,\[x17\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1h {za1h.h\[w15,8\]},p7/z,\[sp\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1h {za1v.h\[w15,8\]},p7/z,\[x0,x17,lsl#1\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1h {za1h.h\[w15,8\]},p7/z,\[sp,x17,lsl#1\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1w {za4h.s\[w12,0\]},p0/z,\[x0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1w {za4v.s\[w12,0\]},p0/z,\[sp\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1w {za4h.s\[w12,0\]},p0/z,\[x0,x0,lsl#2\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1w {za4v.s\[w12,0\]},p0/z,\[sp,x0,lsl#2\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1w {za4h.s\[w12,0\]},p0/z,\[x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1w {za4v.s\[w12,0\]},p0/z,\[sp\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1w {za4h.s\[w12,0\]},p0/z,\[x0,x0,lsl#2\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1w {za4v.s\[w12,0\]},p0/z,\[sp,x0,lsl#2\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1w {za3h.s\[w15,4\]},p7/z,\[x17\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1w {za3v.s\[w15,4\]},p7/z,\[sp\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1w {za3h.s\[w15,4\]},p7/z,\[x0,x17,lsl#2\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1w {za3v.s\[w15,4\]},p7/z,\[sp,x17,lsl#2\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1d {za8v.d\[w12,0\]},p0/z,\[x0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1d {za8h.d\[w12,0\]},p0/z,\[sp\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1d {za8v.d\[w12,0\]},p0/z,\[x0,x0,lsl#3\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `ld1d {za8h.d\[w12,0\]},p0/z,\[sp,x0,lsl#3\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1d {za8v.d\[w12,0\]},p0/z,\[x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1d {za8h.d\[w12,0\]},p0/z,\[sp\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1d {za8v.d\[w12,0\]},p0/z,\[x0,x0,lsl#3\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `ld1d {za8h.d\[w12,0\]},p0/z,\[sp,x0,lsl#3\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1d {za7v.d\[w15,2\]},p7/z,\[x17\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1d {za7h.d\[w15,2\]},p7/z,\[sp\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `ld1d {za7v.d\[w15,2\]},p7/z,\[x0,x17,lsl#3\]'
diff --git a/gas/testsuite/gas/aarch64/sme-6-illegal.l b/gas/testsuite/gas/aarch64/sme-6-illegal.l
index 233c12af15a..4fe36135f6e 100644
--- a/gas/testsuite/gas/aarch64/sme-6-illegal.l
+++ b/gas/testsuite/gas/aarch64/sme-6-illegal.l
@@ -5,32 +5,32 @@
[^:]*:[0-9]+: Error: '\]' expected at operand 3 -- `st1w {za3v.s\[w15,3\]},p7,\[sp,lsl#2\]'
[^:]*:[0-9]+: Error: invalid addressing mode at operand 3 -- `st1d {za0h.d\[w12,0\]},p0,\[sp,x0,lsl#12\]'
[^:]*:[0-9]+: Error: expected ',' at operand 1 -- `st1q {za0v.q\[w12\]},p0,\[x0,x0,lsl#2\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1b {za1h.b\[w12,0\]},p0,\[x0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1b {za1v.b\[w12,0\]},p0,\[sp\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1b {za1h.b\[w12,0\]},p0,\[sp,x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1b {za1h.b\[w12,0\]},p0,\[x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1b {za1v.b\[w12,0\]},p0,\[sp\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1b {za1h.b\[w12,0\]},p0,\[sp,x0\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1b {za0v.b\[w15,16\]},p7,\[x17\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1b {za0h.b\[w15,16\]},p7,\[sp\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1b {za0v.b\[w15,16\]},p7,\[sp,x17\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1h {za2v.h\[w12,0\]},p0,\[x0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1h {za2h.h\[w12,0\]},p0,\[sp\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1h {za2v.h\[w12,0\]},p0,\[x0,x0,lsl#1\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1h {za2h.h\[w12,0\]},p0,\[sp,x0,lsl#1\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1h {za2v.h\[w12,0\]},p0,\[x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1h {za2h.h\[w12,0\]},p0,\[sp\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1h {za2v.h\[w12,0\]},p0,\[x0,x0,lsl#1\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1h {za2h.h\[w12,0\]},p0,\[sp,x0,lsl#1\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1h {za1v.h\[w15,8\]},p7,\[x17\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1h {za1h.h\[w15,8\]},p7,\[sp\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1h {za1v.h\[w15,8\]},p7,\[x0,x17,lsl#1\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1h {za1h.h\[w15,8\]},p7,\[sp,x17,lsl#1\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1w {za4h.s\[w12,0\]},p0,\[x0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1w {za4v.s\[w12,0\]},p0,\[sp\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1w {za4h.s\[w12,0\]},p0,\[x0,x0,lsl#2\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1w {za4v.s\[w12,0\]},p0,\[sp,x0,lsl#2\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1w {za4h.s\[w12,0\]},p0,\[x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1w {za4v.s\[w12,0\]},p0,\[sp\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1w {za4h.s\[w12,0\]},p0,\[x0,x0,lsl#2\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1w {za4v.s\[w12,0\]},p0,\[sp,x0,lsl#2\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1w {za3h.s\[w15,4\]},p7,\[x17\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1w {za3v.s\[w15,4\]},p7,\[sp\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1w {za3h.s\[w15,4\]},p7,\[x0,x17,lsl#2\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1w {za3v.s\[w15,4\]},p7,\[sp,x17,lsl#2\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1d {za8v.d\[w12,0\]},p0,\[x0\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1d {za8h.d\[w12,0\]},p0,\[sp\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1d {za8v.d\[w12,0\]},p0,\[x0,x0,lsl#3\]'
-[^:]*:[0-9]+: Error: ZA tile vector out of range at operand 1 -- `st1d {za8h.d\[w12,0\]},p0,\[sp,x0,lsl#3\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1d {za8v.d\[w12,0\]},p0,\[x0\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1d {za8h.d\[w12,0\]},p0,\[sp\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1d {za8v.d\[w12,0\]},p0,\[x0,x0,lsl#3\]'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `st1d {za8h.d\[w12,0\]},p0,\[sp,x0,lsl#3\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1d {za7v.d\[w15,2\]},p7,\[x17\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1d {za7h.d\[w15,2\]},p7,\[sp\]'
[^:]*:[0-9]+: Error: index offset out of range at operand 1 -- `st1d {za7v.d\[w15,2\]},p7,\[x0,x17,lsl#3\]'
diff --git a/gas/testsuite/gas/aarch64/sme-illegal.l b/gas/testsuite/gas/aarch64/sme-illegal.l
index 19d22daad67..efc9b800656 100644
--- a/gas/testsuite/gas/aarch64/sme-illegal.l
+++ b/gas/testsuite/gas/aarch64/sme-illegal.l
@@ -1,95 +1,117 @@
[^:]*: Assembler messages:
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `addha za4.s,p0/m,p1/m,z1.s'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `addha za15.s,p2/m,p3/m,z2.s'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `addha za4.s,p0/m,p1/m,z1.s'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `addha za15.s,p2/m,p3/m,z2.s'
[^:]*:[0-9]+: Error: operand mismatch -- `addha za0.s,p2/m,p3/m,z2.d'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: addha za0.d, p2/m, p3/m, z2.d
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `addha za8.d,p0/m,p1/m,z1.d'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `addha za15.d,p2/m,p3/m,z2.d'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `addha za8.d,p0/m,p1/m,z1.d'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `addha za15.d,p2/m,p3/m,z2.d'
[^:]*:[0-9]+: Error: operand mismatch -- `addha za0.d,p2/m,p3/m,z2.s'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: addha za0.d, p2/m, p3/m, z2.d
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `addva za4.s,p0/m,p1/m,z1.s'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `addva za15.s,p2/m,p3/m,z2.s'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `addva za4.s,p0/m,p1/m,z1.s'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `addva za15.s,p2/m,p3/m,z2.s'
[^:]*:[0-9]+: Error: operand mismatch -- `addva za0.s,p2/m,p3/m,z2.d'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: addva za0.d, p2/m, p3/m, z2.d
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `addva za8.d,p0/m,p1/m,z1.d'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `addva za15.d,p2/m,p3/m,z2.d'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `addva za8.d,p0/m,p1/m,z1.d'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `addva za15.d,p2/m,p3/m,z2.d'
[^:]*:[0-9]+: Error: operand mismatch -- `addva za0.d,p2/m,p3/m,z2.s'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: addva za0.d, p2/m, p3/m, z2.d
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `bfmopa za4.s,p0/m,p1/m,z1.h,z4.h'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `bfmopa za4.s,p0/m,p1/m,z1.h,z4.h'
[^:]*:[0-9]+: Error: operand mismatch -- `bfmopa za0.s,p2/m,p3/m,z2.s,z3.s'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: bfmopa za0.s, p2/m, p3/m, z2.h, z3.h
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `bfmops za4.s,p0/m,p1/m,z1.h,z4.h'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `bfmops za4.s,p0/m,p1/m,z1.h,z4.h'
[^:]*:[0-9]+: Error: operand mismatch -- `bfmops za0.s,p2/m,p3/m,z2.s,z3.s'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: bfmops za0.s, p2/m, p3/m, z2.h, z3.h
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `fmopa za4.s,p0/m,p1/m,z1.s,z4.s'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `fmopa za4.s,p0/m,p1/m,z1.s,z4.s'
[^:]*:[0-9]+: Error: operand mismatch -- `fmopa za0.s,p6/m,p7/m,z4.d,z1.d'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: fmopa za0.d, p6/m, p7/m, z4.d, z1.d
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `fmopa za8.d,p0/m,p1/m,z1.d,z8.d'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `fmopa za8.d,p0/m,p1/m,z1.d,z8.d'
[^:]*:[0-9]+: Error: operand mismatch -- `fmopa za0.d,p2/m,p3/m,z2.s,z7.s'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: fmopa za0.d, p2/m, p3/m, z2.d, z7.d
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `fmopa za4.s,p0/m,p1/m,z1.h,z4.h'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `fmopa za4.s,p0/m,p1/m,z1.h,z4.h'
[^:]*:[0-9]+: Error: operand mismatch -- `fmopa za1.s,p2/m,p3/m,z2.q,z3.q'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: fmopa za1.d, p2/m, p3/m, z2.d, z3.d
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `fmops za4.s,p0/m,p1/m,z1.s,z4.s'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `fmops za4.s,p0/m,p1/m,z1.s,z4.s'
[^:]*:[0-9]+: Error: operand mismatch -- `fmops za1.s,p2/m,p3/m,z2.q,z3.q'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: fmops za1.d, p2/m, p3/m, z2.d, z3.d
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `fmops za8.d,p0/m,p1/m,z1.d,z8.d'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `fmops za8.d,p0/m,p1/m,z1.d,z8.d'
[^:]*:[0-9]+: Error: operand mismatch -- `fmops za0.d,p2/m,p3/m,z2.s,z7.s'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: fmops za0.d, p2/m, p3/m, z2.d, z7.d
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `fmops za8.s,p0/m,p1/m,z1.h,z4.h'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `fmops za1.q,p2/m,p3/m,z2.h,z3.h'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `smopa za4.s,p0/m,p1/m,z1.b,z4.b'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `smopa za1.q,p2/m,p3/m,z2.b,z3.b'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `smopa za8.d,p0/m,p1/m,z1.h,z8.h'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `fmops za8.s,p0/m,p1/m,z1.h,z4.h'
+[^:]*:[0-9]+: Error: operand mismatch -- `fmops za1.q,p2/m,p3/m,z2.h,z3.h'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: fmops za1.d, p2/m, p3/m, z2.d, z3.d
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `smopa za4.s,p0/m,p1/m,z1.b,z4.b'
+[^:]*:[0-9]+: Error: operand mismatch -- `smopa za1.q,p2/m,p3/m,z2.b,z3.b'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: smopa za1.d, p2/m, p3/m, z2.h, z3.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `smopa za8.d,p0/m,p1/m,z1.h,z8.h'
[^:]*:[0-9]+: Error: operand mismatch -- `smopa za1.d,p2/m,p3/m,z2.h,z7.q'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: smopa za1.d, p2/m, p3/m, z2.h, z7.h
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `smops za4.s,p0/m,p1/m,z1.b,z4.b'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `smops za1.q,p2/m,p3/m,z2.b,z3.b'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `smops za8.d,p0/m,p1/m,z1.h,z8.h'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `smops za4.s,p0/m,p1/m,z1.b,z4.b'
+[^:]*:[0-9]+: Error: operand mismatch -- `smops za1.q,p2/m,p3/m,z2.b,z3.b'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: smops za1.d, p2/m, p3/m, z2.h, z3.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `smops za8.d,p0/m,p1/m,z1.h,z8.h'
[^:]*:[0-9]+: Error: operand mismatch -- `smops za1.d,p2/m,p3/m,z2.h,z7.q'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: smops za1.d, p2/m, p3/m, z2.h, z7.h
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `sumopa za4.s,p0/m,p1/m,z1.b,z4.b'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `sumopa za1.q,p2/m,p3/m,z2.s,z3.s'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `sumopa za8.d,p0/m,p1/m,z1.h,z8.h'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `sumopa za4.s,p0/m,p1/m,z1.b,z4.b'
+[^:]*:[0-9]+: Error: operand mismatch -- `sumopa za1.q,p2/m,p3/m,z2.s,z3.s'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: sumopa za1.d, p2/m, p3/m, z2.h, z3.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `sumopa za8.d,p0/m,p1/m,z1.h,z8.h'
[^:]*:[0-9]+: Error: operand mismatch -- `sumopa za1.d,p2/m,p3/m,z2.h,z7.q'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: sumopa za1.d, p2/m, p3/m, z2.h, z7.h
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `sumops za4.s,p0/m,p1/m,z1.b,z4.b'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `sumops za1.q,p2/m,p3/m,z2.b,z3.b'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `sumops za8.d,p0/m,p1/m,z1.h,z8.h'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `sumops za1.q,p2/m,p3/m,z2.h,z7.h'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `umopa za4.s,p0/m,p1/m,z1.b,z4.b'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `umopa za1.q,p2/m,p3/m,z2.b,z3.b'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `umopa za8.d,p0/m,p1/m,z1.h,z8.h'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `umopa za1.q,p2/m,p3/m,z2.h,z7.h'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `umops za4.s,p0/m,p1/m,z1.b,z4.b'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `umops za1.q,p2/m,p3/m,z2.b,z3.b'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `umops za8.d,p0/m,p1/m,z1.h,z8.h'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `sumops za4.s,p0/m,p1/m,z1.b,z4.b'
+[^:]*:[0-9]+: Error: operand mismatch -- `sumops za1.q,p2/m,p3/m,z2.b,z3.b'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: sumops za1.d, p2/m, p3/m, z2.h, z3.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `sumops za8.d,p0/m,p1/m,z1.h,z8.h'
+[^:]*:[0-9]+: Error: operand mismatch -- `sumops za1.q,p2/m,p3/m,z2.h,z7.h'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: sumops za1.d, p2/m, p3/m, z2.h, z7.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `umopa za4.s,p0/m,p1/m,z1.b,z4.b'
+[^:]*:[0-9]+: Error: operand mismatch -- `umopa za1.q,p2/m,p3/m,z2.b,z3.b'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: umopa za1.d, p2/m, p3/m, z2.h, z3.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `umopa za8.d,p0/m,p1/m,z1.h,z8.h'
+[^:]*:[0-9]+: Error: operand mismatch -- `umopa za1.q,p2/m,p3/m,z2.h,z7.h'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: umopa za1.d, p2/m, p3/m, z2.h, z7.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `umops za4.s,p0/m,p1/m,z1.b,z4.b'
+[^:]*:[0-9]+: Error: operand mismatch -- `umops za1.q,p2/m,p3/m,z2.b,z3.b'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: umops za1.d, p2/m, p3/m, z2.h, z3.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `umops za8.d,p0/m,p1/m,z1.h,z8.h'
[^:]*:[0-9]+: Error: operand mismatch -- `umops za1.d,p2/m,p3/m,z2.d,z7.d'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: umops za1.d, p2/m, p3/m, z2.h, z7.h
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `usmopa za4.s,p0/m,p1/m,z1.b,z4.b'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `usmopa za1.q,p2/m,p3/m,z2.b,z3.b'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `usmopa za8.d,p0/m,p1/m,z1.h,z8.h'
-[^:]*:[0-9]+: Error: invalid ZA tile element size, allowed b, h, s and d at operand 1 -- `usmopa za1.q,p2/m,p3/m,z2.h,z7.h'
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za3 at operand 1 -- `usmops za4.s,p0/m,p1/m,z1.b,z4.b'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `usmopa za4.s,p0/m,p1/m,z1.b,z4.b'
+[^:]*:[0-9]+: Error: operand mismatch -- `usmopa za1.q,p2/m,p3/m,z2.b,z3.b'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: usmopa za1.d, p2/m, p3/m, z2.h, z3.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `usmopa za8.d,p0/m,p1/m,z1.h,z8.h'
+[^:]*:[0-9]+: Error: operand mismatch -- `usmopa za1.q,p2/m,p3/m,z2.h,z7.h'
+[^:]*:[0-9]+: Info: did you mean this\?
+[^:]*:[0-9]+: Info: usmopa za1.d, p2/m, p3/m, z2.h, z7.h
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `usmops za4.s,p0/m,p1/m,z1.b,z4.b'
[^:]*:[0-9]+: Error: operand mismatch -- `usmops za1.s,p2/m,p3/m,z2.s,z3.b'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: usmops za1.d, p2/m, p3/m, z2.h, z3.h
-[^:]*:[0-9]+: Error: invalid ZA tile register number, expected za0-za7 at operand 1 -- `usmops za8.d,p0/m,p1/m,z1.h,z8.h'
+[^:]*:[0-9]+: Error: ZA tile number out of range at operand 1 -- `usmops za8.d,p0/m,p1/m,z1.h,z8.h'
[^:]*:[0-9]+: Error: operand mismatch -- `usmops za1.d,p2/m,p3/m,z2.d,z7.d'
[^:]*:[0-9]+: Info: did you mean this\?
[^:]*:[0-9]+: Info: usmops za1.d, p2/m, p3/m, z2.h, z7.h
--
2.25.1
next prev parent reply other threads:[~2023-03-30 10:24 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-30 10:23 [PATCH 00/43] aarch64: Groundwork for SME2 support Richard Sandiford
2023-03-30 10:23 ` [PATCH 01/43] aarch64: Fix PSEL opcode mask Richard Sandiford
2023-03-30 10:23 ` [PATCH 02/43] aarch64: Restrict range of PRFM opcodes Richard Sandiford
2023-03-30 10:23 ` [PATCH 03/43] aarch64: Fix SVE2 register/immediate distinction Richard Sandiford
2023-03-30 10:23 ` [PATCH 04/43] aarch64: Make SME instructions use F_STRICT Richard Sandiford
2023-03-30 10:23 ` [PATCH 05/43] aarch64: Use aarch64_operand_error more widely Richard Sandiford
2023-03-30 10:23 ` [PATCH 06/43] aarch64: Rename REG_TYPE_ZA* to REG_TYPE_ZAT* Richard Sandiford
2023-03-30 10:23 ` [PATCH 07/43] aarch64: Add REG_TYPE_ZATHV Richard Sandiford
2023-03-30 10:23 ` [PATCH 08/43] aarch64: Move vectype_to_qualifier further up Richard Sandiford
2023-03-30 10:23 ` [PATCH 09/43] aarch64: Rework parse_typed_reg interface Richard Sandiford
2023-03-30 10:23 ` [PATCH 10/43] aarch64: Reuse parse_typed_reg for ZA tiles Richard Sandiford
2023-03-30 10:23 ` Richard Sandiford [this message]
2023-03-30 10:23 ` [PATCH 12/43] aarch64: Treat ZA as a register Richard Sandiford
2023-03-30 10:23 ` [PATCH 13/43] aarch64: Rename za_tile_vector to za_index Richard Sandiford
2023-03-30 10:23 ` [PATCH 14/43] aarch64: Make indexed_za use 64-bit immediates Richard Sandiford
2023-03-30 10:23 ` [PATCH 15/43] aarch64: Pass aarch64_indexed_za to parsers Richard Sandiford
2023-03-30 10:23 ` [PATCH 16/43] aarch64: Move ZA range checks to aarch64-opc.c Richard Sandiford
2023-03-30 10:23 ` [PATCH 17/43] aarch64: Consolidate ZA slice parsing Richard Sandiford
2023-03-30 10:23 ` [PATCH 18/43] aarch64: Commonise index parsing Richard Sandiford
2023-03-30 10:23 ` [PATCH 19/43] aarch64: Move w12-w15 range check to libopcodes Richard Sandiford
2023-03-30 10:23 ` [PATCH 20/43] aarch64: Tweak error for missing immediate offset Richard Sandiford
2023-03-30 10:23 ` [PATCH 21/43] aarch64: Tweak errors for base & offset registers Richard Sandiford
2023-03-30 10:23 ` [PATCH 22/43] aarch64: Tweak parsing of integer & FP registers Richard Sandiford
2023-03-30 10:23 ` [PATCH 23/43] aarch64: Improve errors for malformed register lists Richard Sandiford
2023-03-30 10:23 ` [PATCH 24/43] aarch64: Try to avoid inappropriate default errors Richard Sandiford
2023-03-30 10:23 ` [PATCH 25/43] aarch64: Rework reporting of failed register checks Richard Sandiford
2023-03-30 10:23 ` [PATCH 26/43] aarch64: Update operand_mismatch_kind_names Richard Sandiford
2023-03-30 10:23 ` [PATCH 27/43] aarch64: Deprioritise AARCH64_OPDE_REG_LIST Richard Sandiford
2023-03-30 10:23 ` [PATCH 28/43] aarch64: Add an error code for out-of-range registers Richard Sandiford
2023-03-30 10:23 ` [PATCH 29/43] aarch64: Commonise checks for index operands Richard Sandiford
2023-03-30 10:23 ` [PATCH 30/43] aarch64: Add an operand class for SVE register lists Richard Sandiford
2023-03-30 10:23 ` [PATCH 31/43] aarch64: Make AARCH64_OPDE_REG_LIST take a bitfield Richard Sandiford
2023-03-30 10:23 ` [PATCH 32/43] aarch64: Tweak register list errors Richard Sandiford
2023-03-30 10:23 ` [PATCH 33/43] aarch64: Try to report invalid variants against the closest match Richard Sandiford
2023-03-30 10:23 ` [PATCH 34/43] aarch64: Tweak priorities of parsing-related errors Richard Sandiford
2023-03-30 10:23 ` [PATCH 35/43] aarch64: Rename aarch64-tbl.h OP_SME_* macros Richard Sandiford
2023-03-30 10:23 ` [PATCH 36/43] aarch64: Reorder some OP_SVE_* macros Richard Sandiford
2023-03-30 10:23 ` [PATCH 37/43] aarch64: Add a aarch64_cpu_supports_inst_p helper Richard Sandiford
2023-03-30 10:23 ` [PATCH 38/43] aarch64: Rename some of GAS's REG_TYPE_* macros Richard Sandiford
2023-03-30 10:23 ` [PATCH 39/43] aarch64: Regularise FLD_* suffixes Richard Sandiford
2023-03-30 10:23 ` [PATCH 40/43] aarch64: Resync field names Richard Sandiford
2023-03-30 10:23 ` [PATCH 41/43] aarch64: Sort fields alphanumerically Richard Sandiford
2023-03-30 10:23 ` [PATCH 42/43] aarch64: Add support for strided register lists Richard Sandiford
2023-03-30 15:50 ` Simon Marchi
2023-03-30 16:06 ` Richard Sandiford
2023-03-30 10:23 ` [PATCH 43/43] aarch64: Prefer register ranges & support wrapping Richard Sandiford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230330102359.3327695-12-richard.sandiford@arm.com \
--to=richard.sandiford@arm.com \
--cc=binutils@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).