From: Richard Sandiford <richard.sandiford@arm.com>
To: binutils@sourceware.org
Cc: Richard Sandiford <richard.sandiford@arm.com>
Subject: [PATCH 30/43] aarch64: Add an operand class for SVE register lists
Date: Thu, 30 Mar 2023 11:23:46 +0100 [thread overview]
Message-ID: <20230330102359.3327695-31-richard.sandiford@arm.com> (raw)
In-Reply-To: <20230330102359.3327695-1-richard.sandiford@arm.com>
SVE register lists were classified as SVE_REG, since there had been
no particular reason to separate them out. However, some SME2
instructions have tied register list operands, and so we need to
distinguish registers and register lists when checking whether two
operands match.
Also, the register list operands used a general error message,
even though we already have a dedicated error code for register
lists that are the wrong length.
---
gas/testsuite/gas/aarch64/illegal-sve2.l | 26 ++++++++++++------------
include/opcode/aarch64.h | 1 +
opcodes/aarch64-opc-2.c | 4 ++--
opcodes/aarch64-opc.c | 19 ++++++++---------
opcodes/aarch64-tbl.h | 4 ++--
5 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/gas/testsuite/gas/aarch64/illegal-sve2.l b/gas/testsuite/gas/aarch64/illegal-sve2.l
index d41f6f23ba5..995440627d1 100644
--- a/gas/testsuite/gas/aarch64/illegal-sve2.l
+++ b/gas/testsuite/gas/aarch64/illegal-sve2.l
@@ -248,8 +248,8 @@
[^ :]+:[0-9]+: Error: operand mismatch -- `ext z0\.b,{z0\.h,z1\.h},#0'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: ext z0\.b, {z0\.b, z1\.b}, #0
-[^ :]+:[0-9]+: Error: invalid register list at operand 2 -- `ext z0\.b,{z0\.b,z1\.b,z2\.b},#0'
-[^ :]+:[0-9]+: Error: invalid register list at operand 2 -- `ext z0\.b,{z0\.b},#0'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; 2 registers are expected at operand 2 -- `ext z0\.b,{z0\.b,z1\.b,z2\.b},#0'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; 2 registers are expected at operand 2 -- `ext z0\.b,{z0\.b},#0'
[^ :]+:[0-9]+: Error: expected an SVE vector register at operand 3 -- `ext z0\.b,z0\.b,#0'
[^ :]+:[0-9]+: Error: invalid register list at operand 2 -- `ext z0\.b,{z31\.b,z1\.b},#0'
[^ :]+:[0-9]+: Error: invalid register list at operand 2 -- `ext z0\.b,{z0\.b,z31\.b},#0'
@@ -488,7 +488,7 @@
[^ :]+:[0-9]+: Error: operand mismatch -- `histseg z0\.b,z0\.b,z0\.h'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: histseg z0\.b, z0\.b, z0\.b
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `ldnt1b {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `ldnt1b {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `ldnt1b {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: ldnt1b {z0\.s}, p0/z, \[z0\.s, xzr\]
@@ -515,7 +515,7 @@
[^ :]+:[0-9]+: Error: invalid offset register at operand 3 -- `ldnt1b {z0\.s},p0/z,\[z0\.s,sp\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1b {z0\.s},p0/z,\[z0\.s,x32\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1b {z0\.s},p0/z,\[z0\.s,z0\.s\]'
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `ldnt1d {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `ldnt1d {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `ldnt1d {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: ldnt1d {z0\.d}, p0/z, \[z0\.d, xzr\]
@@ -535,7 +535,7 @@
[^ :]+:[0-9]+: Error: operand mismatch -- `ldnt1d {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: ldnt1d {z0\.d}, p0/z, \[z0\.d, xzr\]
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `ldnt1h {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `ldnt1h {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `ldnt1h {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: ldnt1h {z0\.s}, p0/z, \[z0\.s, xzr\]
@@ -556,7 +556,7 @@
[^ :]+:[0-9]+: Error: invalid offset register at operand 3 -- `ldnt1h {z0\.s},p0/z,\[z0\.s,sp\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1h {z0\.s},p0/z,\[z0\.s,x32\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1h {z0\.s},p0/z,\[z0\.s,z0\.s\]'
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `ldnt1sb {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `ldnt1sb {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `ldnt1sb {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: ldnt1sb {z0\.d}, p0/z, \[z0\.d, xzr\]
@@ -569,7 +569,7 @@
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1sb {z0\.d},p0/z,\[z0\.d,x32\]'
[^ :]+:[0-9]+: Error: invalid use of 32-bit register offset at operand 3 -- `ldnt1sb {z0\.d},p0/z,\[z0\.d,w16\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1sb {z0\.d},p0/z,\[z0\.d,z0\.d\]'
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `ldnt1sh {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `ldnt1sh {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `ldnt1sh {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: ldnt1sh {z0\.d}, p0/z, \[z0\.d, xzr\]
@@ -582,7 +582,7 @@
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1sh {z0\.d},p0/z,\[z0\.d,x32\]'
[^ :]+:[0-9]+: Error: invalid use of 32-bit register offset at operand 3 -- `ldnt1sh {z0\.d},p0/z,\[z0\.d,w16\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1sh {z0\.d},p0/z,\[z0\.d,z0\.d\]'
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `ldnt1sh {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `ldnt1sh {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `ldnt1sh {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: ldnt1sh {z0\.d}, p0/z, \[z0\.d, xzr\]
@@ -595,7 +595,7 @@
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1sh {z0\.d},p0/z,\[z0\.d,x32\]'
[^ :]+:[0-9]+: Error: invalid use of 32-bit register offset at operand 3 -- `ldnt1sh {z0\.d},p0/z,\[z0\.d,w16\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `ldnt1sh {z0\.d},p0/z,\[z0\.d,z0\.d\]'
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `ldnt1w {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `ldnt1w {z0\.d,z1\.d},p0/z,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `ldnt1w {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: ldnt1w {z0\.s}, p0/z, \[z0\.s, xzr\]
@@ -2212,7 +2212,7 @@
[^ :]+:[0-9]+: Info: other valid variant\(s\):
[^ :]+:[0-9]+: Info: ssubwt z0\.s, z0\.s, z0\.h
[^ :]+:[0-9]+: Info: ssubwt z0\.d, z0\.d, z0\.s
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `stnt1b {z0\.d,z1\.d},p0,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `stnt1b {z0\.d,z1\.d},p0,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `stnt1b {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: stnt1b {z0\.s}, p0, \[z0\.s, xzr\]
@@ -2233,7 +2233,7 @@
[^ :]+:[0-9]+: Error: invalid offset register at operand 3 -- `stnt1b {z0\.s},p0,\[z0\.s,sp\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `stnt1b {z0\.s},p0,\[z0\.s,x32\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `stnt1b {z0\.s},p0,\[z0\.s,z0\.s\]'
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `stnt1d {z0\.d,z1\.d},p0,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `stnt1d {z0\.d,z1\.d},p0,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `stnt1d {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: stnt1d {z0\.d}, p0, \[z0\.d, xzr\]
@@ -2247,7 +2247,7 @@
[^ :]+:[0-9]+: Error: operand mismatch -- `stnt1d {z0\.s},p0,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: stnt1d {z0\.d}, p0, \[z0\.d, xzr\]
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `stnt1h {z0\.d,z1\.d},p0,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `stnt1h {z0\.d,z1\.d},p0,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `stnt1h {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: stnt1h {z0\.s}, p0, \[z0\.s, xzr\]
@@ -2268,7 +2268,7 @@
[^ :]+:[0-9]+: Error: invalid offset register at operand 3 -- `stnt1h {z0\.s},p0,\[z0\.s,sp\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `stnt1h {z0\.s},p0,\[z0\.s,x32\]'
[^ :]+:[0-9]+: Error: invalid addressing mode at operand 3 -- `stnt1h {z0\.s},p0,\[z0\.s,z0\.s\]'
-[^ :]+:[0-9]+: Error: invalid register list at operand 1 -- `stnt1w {z0\.d,z1\.d},p0,\[z0\.d,x0\]'
+[^ :]+:[0-9]+: Error: invalid number of registers in the list; only 1 register is expected at operand 1 -- `stnt1w {z0\.d,z1\.d},p0,\[z0\.d,x0\]'
[^ :]+:[0-9]+: Error: operand mismatch -- `stnt1w {z0\.d},p0/m,\[z0\.d\]'
[^ :]+:[0-9]+: Info: did you mean this\?
[^ :]+:[0-9]+: Info: stnt1w {z0\.s}, p0, \[z0\.s, xzr\]
diff --git a/include/opcode/aarch64.h b/include/opcode/aarch64.h
index 6615dec41a7..d09897f48d4 100644
--- a/include/opcode/aarch64.h
+++ b/include/opcode/aarch64.h
@@ -224,6 +224,7 @@ enum aarch64_operand_class
AARCH64_OPND_CLASS_SISD_REG,
AARCH64_OPND_CLASS_SIMD_REGLIST,
AARCH64_OPND_CLASS_SVE_REG,
+ AARCH64_OPND_CLASS_SVE_REGLIST,
AARCH64_OPND_CLASS_PRED_REG,
AARCH64_OPND_CLASS_ZA_ACCESS,
AARCH64_OPND_CLASS_ADDRESS,
diff --git a/opcodes/aarch64-opc-2.c b/opcodes/aarch64-opc-2.c
index 3603f2c8c9b..2fa09b29d26 100644
--- a/opcodes/aarch64-opc-2.c
+++ b/opcodes/aarch64-opc-2.c
@@ -231,9 +231,9 @@ const struct aarch64_operand aarch64_operands[] =
{AARCH64_OPND_CLASS_SVE_REG, "SVE_Zm4_INDEX", 4 << OPD_F_OD_LSB | OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SVE_Zm_16}, "an indexed SVE vector register"},
{AARCH64_OPND_CLASS_SVE_REG, "SVE_Zn", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SVE_Zn}, "an SVE vector register"},
{AARCH64_OPND_CLASS_SVE_REG, "SVE_Zn_INDEX", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SVE_Zn}, "an indexed SVE vector register"},
- {AARCH64_OPND_CLASS_SVE_REG, "SVE_ZnxN", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SVE_Zn}, "a list of SVE vector registers"},
+ {AARCH64_OPND_CLASS_SVE_REGLIST, "SVE_ZnxN", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SVE_Zn}, "a list of SVE vector registers"},
{AARCH64_OPND_CLASS_SVE_REG, "SVE_Zt", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SVE_Zt}, "an SVE vector register"},
- {AARCH64_OPND_CLASS_SVE_REG, "SVE_ZtxN", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SVE_Zt}, "a list of SVE vector registers"},
+ {AARCH64_OPND_CLASS_SVE_REGLIST, "SVE_ZtxN", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SVE_Zt}, "a list of SVE vector registers"},
{AARCH64_OPND_CLASS_SVE_REG, "SME_ZAda_2b", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SME_ZAda_2b}, "an SME ZA tile ZA0-ZA3"},
{AARCH64_OPND_CLASS_SVE_REG, "SME_ZAda_3b", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SME_ZAda_3b}, "an SME ZA tile ZA0-ZA7"},
{AARCH64_OPND_CLASS_ZA_ACCESS, "SME_ZA_HV_idx_src", OPD_F_HAS_INSERTER | OPD_F_HAS_EXTRACTOR, {FLD_SME_size_10,FLD_SME_Q,FLD_SME_V,FLD_SME_Rv,FLD_imm4_5}, "an SME horizontal or vertical vector access register"},
diff --git a/opcodes/aarch64-opc.c b/opcodes/aarch64-opc.c
index 6b9b19ffc57..dfffbf6f6e5 100644
--- a/opcodes/aarch64-opc.c
+++ b/opcodes/aarch64-opc.c
@@ -1616,16 +1616,6 @@ operand_general_constraint_met_p (const aarch64_opnd_info *opnds, int idx,
return 0;
break;
- case AARCH64_OPND_SVE_ZnxN:
- case AARCH64_OPND_SVE_ZtxN:
- if (opnd->reglist.num_regs != get_opcode_dependent_value (opcode))
- {
- set_other_error (mismatch_detail, idx,
- _("invalid register list"));
- return 0;
- }
- break;
-
case AARCH64_OPND_SME_PnT_Wm_imm:
size = aarch64_get_qualifier_esize (opnd->qualifier);
max_value = 16 / size - 1;
@@ -1638,6 +1628,15 @@ operand_general_constraint_met_p (const aarch64_opnd_info *opnds, int idx,
}
break;
+ case AARCH64_OPND_CLASS_SVE_REGLIST:
+ num = get_opcode_dependent_value (opcode);
+ if (opnd->reglist.num_regs != num)
+ {
+ set_reg_list_error (mismatch_detail, idx, num);
+ return 0;
+ }
+ break;
+
case AARCH64_OPND_CLASS_ZA_ACCESS:
switch (type)
{
diff --git a/opcodes/aarch64-tbl.h b/opcodes/aarch64-tbl.h
index 98b2b01b2a2..77890fd0f14 100644
--- a/opcodes/aarch64-tbl.h
+++ b/opcodes/aarch64-tbl.h
@@ -5902,11 +5902,11 @@ const struct aarch64_opcode aarch64_opcode_table[] =
"an SVE vector register") \
Y(SVE_REG, sve_index, "SVE_Zn_INDEX", 0, F(FLD_SVE_Zn), \
"an indexed SVE vector register") \
- Y(SVE_REG, sve_reglist, "SVE_ZnxN", 0, F(FLD_SVE_Zn), \
+ Y(SVE_REGLIST, sve_reglist, "SVE_ZnxN", 0, F(FLD_SVE_Zn), \
"a list of SVE vector registers") \
Y(SVE_REG, regno, "SVE_Zt", 0, F(FLD_SVE_Zt), \
"an SVE vector register") \
- Y(SVE_REG, sve_reglist, "SVE_ZtxN", 0, F(FLD_SVE_Zt), \
+ Y(SVE_REGLIST, sve_reglist, "SVE_ZtxN", 0, F(FLD_SVE_Zt), \
"a list of SVE vector registers") \
Y(SVE_REG, regno, "SME_ZAda_2b", 0, F(FLD_SME_ZAda_2b), \
"an SME ZA tile ZA0-ZA3") \
--
2.25.1
next prev parent reply other threads:[~2023-03-30 10:24 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-30 10:23 [PATCH 00/43] aarch64: Groundwork for SME2 support Richard Sandiford
2023-03-30 10:23 ` [PATCH 01/43] aarch64: Fix PSEL opcode mask Richard Sandiford
2023-03-30 10:23 ` [PATCH 02/43] aarch64: Restrict range of PRFM opcodes Richard Sandiford
2023-03-30 10:23 ` [PATCH 03/43] aarch64: Fix SVE2 register/immediate distinction Richard Sandiford
2023-03-30 10:23 ` [PATCH 04/43] aarch64: Make SME instructions use F_STRICT Richard Sandiford
2023-03-30 10:23 ` [PATCH 05/43] aarch64: Use aarch64_operand_error more widely Richard Sandiford
2023-03-30 10:23 ` [PATCH 06/43] aarch64: Rename REG_TYPE_ZA* to REG_TYPE_ZAT* Richard Sandiford
2023-03-30 10:23 ` [PATCH 07/43] aarch64: Add REG_TYPE_ZATHV Richard Sandiford
2023-03-30 10:23 ` [PATCH 08/43] aarch64: Move vectype_to_qualifier further up Richard Sandiford
2023-03-30 10:23 ` [PATCH 09/43] aarch64: Rework parse_typed_reg interface Richard Sandiford
2023-03-30 10:23 ` [PATCH 10/43] aarch64: Reuse parse_typed_reg for ZA tiles Richard Sandiford
2023-03-30 10:23 ` [PATCH 11/43] aarch64: Consolidate ZA tile range checks Richard Sandiford
2023-03-30 10:23 ` [PATCH 12/43] aarch64: Treat ZA as a register Richard Sandiford
2023-03-30 10:23 ` [PATCH 13/43] aarch64: Rename za_tile_vector to za_index Richard Sandiford
2023-03-30 10:23 ` [PATCH 14/43] aarch64: Make indexed_za use 64-bit immediates Richard Sandiford
2023-03-30 10:23 ` [PATCH 15/43] aarch64: Pass aarch64_indexed_za to parsers Richard Sandiford
2023-03-30 10:23 ` [PATCH 16/43] aarch64: Move ZA range checks to aarch64-opc.c Richard Sandiford
2023-03-30 10:23 ` [PATCH 17/43] aarch64: Consolidate ZA slice parsing Richard Sandiford
2023-03-30 10:23 ` [PATCH 18/43] aarch64: Commonise index parsing Richard Sandiford
2023-03-30 10:23 ` [PATCH 19/43] aarch64: Move w12-w15 range check to libopcodes Richard Sandiford
2023-03-30 10:23 ` [PATCH 20/43] aarch64: Tweak error for missing immediate offset Richard Sandiford
2023-03-30 10:23 ` [PATCH 21/43] aarch64: Tweak errors for base & offset registers Richard Sandiford
2023-03-30 10:23 ` [PATCH 22/43] aarch64: Tweak parsing of integer & FP registers Richard Sandiford
2023-03-30 10:23 ` [PATCH 23/43] aarch64: Improve errors for malformed register lists Richard Sandiford
2023-03-30 10:23 ` [PATCH 24/43] aarch64: Try to avoid inappropriate default errors Richard Sandiford
2023-03-30 10:23 ` [PATCH 25/43] aarch64: Rework reporting of failed register checks Richard Sandiford
2023-03-30 10:23 ` [PATCH 26/43] aarch64: Update operand_mismatch_kind_names Richard Sandiford
2023-03-30 10:23 ` [PATCH 27/43] aarch64: Deprioritise AARCH64_OPDE_REG_LIST Richard Sandiford
2023-03-30 10:23 ` [PATCH 28/43] aarch64: Add an error code for out-of-range registers Richard Sandiford
2023-03-30 10:23 ` [PATCH 29/43] aarch64: Commonise checks for index operands Richard Sandiford
2023-03-30 10:23 ` Richard Sandiford [this message]
2023-03-30 10:23 ` [PATCH 31/43] aarch64: Make AARCH64_OPDE_REG_LIST take a bitfield Richard Sandiford
2023-03-30 10:23 ` [PATCH 32/43] aarch64: Tweak register list errors Richard Sandiford
2023-03-30 10:23 ` [PATCH 33/43] aarch64: Try to report invalid variants against the closest match Richard Sandiford
2023-03-30 10:23 ` [PATCH 34/43] aarch64: Tweak priorities of parsing-related errors Richard Sandiford
2023-03-30 10:23 ` [PATCH 35/43] aarch64: Rename aarch64-tbl.h OP_SME_* macros Richard Sandiford
2023-03-30 10:23 ` [PATCH 36/43] aarch64: Reorder some OP_SVE_* macros Richard Sandiford
2023-03-30 10:23 ` [PATCH 37/43] aarch64: Add a aarch64_cpu_supports_inst_p helper Richard Sandiford
2023-03-30 10:23 ` [PATCH 38/43] aarch64: Rename some of GAS's REG_TYPE_* macros Richard Sandiford
2023-03-30 10:23 ` [PATCH 39/43] aarch64: Regularise FLD_* suffixes Richard Sandiford
2023-03-30 10:23 ` [PATCH 40/43] aarch64: Resync field names Richard Sandiford
2023-03-30 10:23 ` [PATCH 41/43] aarch64: Sort fields alphanumerically Richard Sandiford
2023-03-30 10:23 ` [PATCH 42/43] aarch64: Add support for strided register lists Richard Sandiford
2023-03-30 15:50 ` Simon Marchi
2023-03-30 16:06 ` Richard Sandiford
2023-03-30 10:23 ` [PATCH 43/43] aarch64: Prefer register ranges & support wrapping Richard Sandiford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230330102359.3327695-31-richard.sandiford@arm.com \
--to=richard.sandiford@arm.com \
--cc=binutils@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).