Re: Problem with put_reg_into_stack

Re: Problem with put_reg_into_stack

[H.J. Lu]

> 
> Hi,
> 
> Here is a simplified version of my previous bug report. I think that
> may be another addressof related bug. mark_addressable () in
> cp/typeck.c has
> 
>       case CONST_DECL:
>       case RESULT_DECL:
>         if (DECL_REGISTER (x) && !TREE_ADDRESSABLE (x)
>             && !DECL_ARTIFICIAL (x) && extra_warnings)
>           cp_warning ("address requested for `%D', which is declared `register'",
>                       x);
>         put_var_into_stack (x);
>         TREE_ADDRESSABLE (x) = 1;
>         return 1;
> 
> The related RTL code is
>  
> (set (reg:QI 23)
>     (mem/s:QI (plus:SI (reg/v/u:SI 22)
>             (const_int 4))))
> 
> That is done on purpose since the x86 pattern doesn't allow memory
> to memory move. put_var_into_stack () calls put_reg_into_stack ()
> which turns
> 
> (reg:QI 23)
> 
> into
> 
> (mem:QI (plus:SI (reg:SI 18)
>         (const_int -2)))
> 
> Now we get
> 
> (set (mem:QI (plus:SI (reg:SI 18)
>         	(const_int -2)))
>     (mem/s:QI (plus:SI (reg/v/u:SI 22)
>             (const_int 4))))
> 
> It is not a valid x86 pattern. I have no idea if it can be fixed
> easily. Maybe i386.md can be modified to fix it.
> 
> Thanks.
> 
> 
> 
> -- 
> H.J. Lu (hjl@gnu.org)
> ---
> typedef unsigned long int pthread_t;
> class JTCThreadId
> {
> public:
>     JTCThreadId();
>     operator pthread_t() const;
> };
> class JTCRecursiveMutex
> {
>     int count_;  
>     JTCThreadId owner_;  
> public:
>     JTCThreadId _JTC_getId() const;
> };
> JTCThreadId
> JTCRecursiveMutex::_JTC_getId() const
> {
>     JTCThreadId id = (count_ > 0) ? owner_ : JTCThreadId();
>     return id;
> }
> 

Here is a kludge. Matthew, please let me know if it works for you.
I hope someone will provide a real fix.

Thanks.


-- 
H.J. Lu (hjl@gnu.org)
----
Sat Dec 12 19:08:53 1998  H.J. Lu  (hjl@gnu.org)

	* config/i386/i386.h (TARGET_MOVE): Allow memory->memory move
	if optimize == 0.

--- ../../../import/egcs/gcc/config/i386/i386.h	Mon Jul 27 09:56:45 1998
+++ config/i386/i386.h	Sat Dec 12 19:11:29 1998
@@ -148,7 +148,9 @@
 #define TARGET_DEBUG_ARG (target_flags & MASK_DEBUG_ARG)
 
 /* Hack macros for tuning code generation */
-#define TARGET_MOVE	((target_flags & MASK_NO_MOVE) == 0)	/* Don't generate memory->memory */
+
+/* Don't generate memory->memory */
+#define TARGET_MOVE	((target_flags & MASK_NO_MOVE) == 0 || optimize == 0)
 #define TARGET_PSEUDO	((target_flags & MASK_NO_PSEUDO) == 0)	/* Move op's args into pseudos */
 
 #define TARGET_386 (ix86_cpu == PROCESSOR_I386)

Re: Internal compiler error in `emit_call_1' - vax-dec-ultrix4.3

[John David Anglin]

Here is a fix for the internal compiler error on the vax:

	* calls.c (emit_call_1): Use call_pop/call_value_pop for all values
	of n_popped when call/call_value are not defined.

--- calls.c.orig	Fri Aug  6 13:57:19 1999
+++ calls.c	Fri Aug  6 13:57:21 1999
@@ -405,7 +405,12 @@
 
 #ifndef ACCUMULATE_OUTGOING_ARGS
 #if defined (HAVE_call_pop) && defined (HAVE_call_value_pop)
-  if (HAVE_call_pop && HAVE_call_value_pop && n_popped > 0)
+#if defined (HAVE_call) && defined (HAVE_call_value)
+  if (HAVE_call && HAVE_call_value && HAVE_call_pop && HAVE_call_value_pop
+       && n_popped > 0)
+#else
+  if (HAVE_call_pop && HAVE_call_value_pop)
+#endif
     {
       rtx n_pop = GEN_INT (n_popped);
       rtx pat;

Re: Internal compiler error in `emit_call_1' - vax-dec-ultrix4.3

[Jeffrey A Law]

  In message < 199908061906.PAA25799@hiauly1.hia.nrc.ca >you write:
  > Here is a fix for the internal compiler error on the vax:
  > 
  > 	* calls.c (emit_call_1): Use call_pop/call_value_pop for all values
  > 	of n_popped when call/call_value are not defined.
I added some comments to clarify what the code was trying to do and installed
your fix.

Thanks,
jeff

Re: Internal compiler error in `emit_call_1' - vax-dec-ultrix4.3

[Jeffrey A Law]

  In message < 199908061906.PAA25799@hiauly1.hia.nrc.ca >you write:
  > Here is a fix for the internal compiler error on the vax:
  > 
  > 	* calls.c (emit_call_1): Use call_pop/call_value_pop for all values
  > 	of n_popped when call/call_value are not defined.
I added some comments to clarify what the code was trying to do and installed
your fix.

Thanks,
jeff

Re: Internal compiler error in `emit_call_1' - vax-dec-ultrix4.3

[John David Anglin]

Here is a fix for the internal compiler error on the vax:

	* calls.c (emit_call_1): Use call_pop/call_value_pop for all values
	of n_popped when call/call_value are not defined.

--- calls.c.orig	Fri Aug  6 13:57:19 1999
+++ calls.c	Fri Aug  6 13:57:21 1999
@@ -405,7 +405,12 @@
 
 #ifndef ACCUMULATE_OUTGOING_ARGS
 #if defined (HAVE_call_pop) && defined (HAVE_call_value_pop)
-  if (HAVE_call_pop && HAVE_call_value_pop && n_popped > 0)
+#if defined (HAVE_call) && defined (HAVE_call_value)
+  if (HAVE_call && HAVE_call_value && HAVE_call_pop && HAVE_call_value_pop
+       && n_popped > 0)
+#else
+  if (HAVE_call_pop && HAVE_call_value_pop)
+#endif
     {
       rtx n_pop = GEN_INT (n_popped);
       rtx pat;

Re: g++-mike-eh8-C test failure

[John David Anglin]

> > But all calls to eh_context_static should be through other functions in
> > libgcc which are not static, like __get_eh_info.  Can you do backtraces so
> > we can see where the two copies are being called from?
> 
> I added verbose output to the linker to try to find where things go wrong.
> It appears trouble starts when __main.o is loaded from libgcc.a to resolve
> __main.  This pulls in tinfo2.o, _ctors.o, _exit.o, tinfo.o, _eh.o,
> lib2funcs.o, opdel.o and exception.o from libgcc.a (see below).  __main
> is the only symbol imported in eh8.s which is not in libstdc++.sl.

Changed my mind.  The problem appears to be caused by the selection of
tinfo2.o in libgcc.a to resolve "char type_info node" (__tic).

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: g++-mike-eh8-C test failure

[John David Anglin]

> Changed my mind.  The problem appears to be caused by the selection of
> tinfo2.o in libgcc.a to resolve "char type_info node" (__tic).

After much testing, it appears that the hpux linker prefers to resolve DATA
symbols from archive libraries even when a shared library with the symbol
preceeds the archive library in the command.  It only seems to resolve DATA
symbols from shared libraries when all symbols are explicitly exported
with "-E" or when no archive library contains the symbol.  Yuck!

It looks like the global DATA symbols that reside in both libstdc++.sl
and libgcc.a should only be in one or the other (probably libgcc.a).

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: g++-mike-eh8-C test failure

[John David Anglin]

After all this grief with duplicate routines, I decided to change the
hpux configuration for libstdc++ so that the standard libraries are not
linked into libstdc++.sl.  This resolves the problem.

I reran the tests.  There was one new failure with "-threads":

FAIL: g++.law/profile1.C (test for excess errors)

However, this is expected since "-pg" and "-threads" are not compatible
(there are no profiling libraries for DCE threads).  Of course, nobody
will get this far unless the configure patch for hpux threads gets
installed.

Regarding the installed location of libstdc++, there is a problem
under hpux when both shared and archive libraries are installed.  For
the shared_archive or archive_shared linker preference mechanism to
work, both the archive and shared libraries must be in the same
directory.  The archive version of libstdc++ is installed in
the compiler installation director as a link to a versioned archive
library in ${prefix}/lib (e.g., libstdc++.a.2.10.0).  The shared
version is installed with no versioning in ${prefix}/lib.  The
compiler location is searched first.  As a result, the archive
version is found first and always selected.

My solution is to remove the link to the archive library in the
compiler directory, version the shared library, and add links in
${prefix}/lib to the versioned libraries.  For example,

289 (hiauly1)dave> ll libstdc*
lrwxr-xr-x   1 bin        bin             18 Apr 30 11:01 libstdc++.a -> libstdc++.a.2.10.0
-rw-r--r--   1 bin        bin         577896 Apr 30 10:40 libstdc++.a.2.10.0
lrwxr-xr-x   1 bin        bin             19 Apr 30 11:01 libstdc++.sl -> libstdc++.sl.2.10.0
-r-xr-xr-x   1 bin        bin         605244 Apr 30 10:40 libstdc++.sl.2.10.0

I did the same in ${prefix}/lib/threads.

This allows removing the version specific compiler stuff without affecting
previously linked apps.  Any thoughts on this?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

--- hpux.ml.orig	Sun Aug 30 17:18:44 1998
+++ hpux.ml	Fri Apr 28 19:23:06 2000
@@ -3,4 +3,4 @@
 SHLIB   = libstdc++.sl
 LIBS    = $(ARLIB) $(ARLINK) $(SHLIB)
 DEPLIBS = ../$(SHLIB)
-SHFLAGS = $(PICFLAG)
+SHFLAGS = -nostdlib $(PICFLAG)

Re: g++-mike-eh8-C test failure

[Jeffrey A Law]

  In message <200004301546.LAA19936@hiauly1.hia.nrc.ca>you write:
  > After all this grief with duplicate routines, I decided to change the
  > hpux configuration for libstdc++ so that the standard libraries are not
  > linked into libstdc++.sl.  This resolves the problem.
And just adds a new set of problems.  Consider if the library needs something
like __muldi3 -- you won't have it anymore after your change because you're
not linking in libgcc.

Basically you've just exchanged one set of problems for an even worse set
of problems.

You might want to read the thread about a shared libgcc since most of the
issues being discussed in that thread directly apply to the issues you're
trying to resolve.

  > Regarding the installed location of libstdc++, there is a problem
  > under hpux when both shared and archive libraries are installed.  For
  > the shared_archive or archive_shared linker preference mechanism to
  > work, both the archive and shared libraries must be in the same
  > directory.  The archive version of libstdc++ is installed in
  > the compiler installation director as a link to a versioned archive
  > library in ${prefix}/lib (e.g., libstdc++.a.2.10.0).  The shared
  > version is installed with no versioning in ${prefix}/lib.  The
  > compiler location is searched first.  As a result, the archive
  > version is found first and always selected.
  > 
  > My solution is to remove the link to the archive library in the
  > compiler directory, version the shared library, and add links in
  > ${prefix}/lib to the versioned libraries.  For example,
Ultimately, I think we're going to want all the libraries in $prefix/lib
with none in the gcc-lib directory.  This is one of the changes necessary
to make a shared libgcc work in a reasonable manner.

jeff

Re: g++-mike-eh8-C test failure

[John David Anglin]

>   In message <200004301546.LAA19936@hiauly1.hia.nrc.ca>you write:
>   > After all this grief with duplicate routines, I decided to change the
>   > hpux configuration for libstdc++ so that the standard libraries are not
>   > linked into libstdc++.sl.  This resolves the problem.
> And just adds a new set of problems.  Consider if the library needs something
> like __muldi3 -- you won't have it anymore after your change because you're
> not linking in libgcc.
> 
> Basically you've just exchanged one set of problems for an even worse set
> of problems.

No.  "-nostdlib" is only used when building the shared varsion of libstdc++.
When an app is linked with libstdc++, libgcc is normally included twice in
the link (eg., without threads -lgcc -lc -lgcc is automatically included).
With the change, I didn't encounter any link problems using the shared
version of libstdc++ included with the gcc-2.95 branch except for the
one case mentioned which involved threads and profiling.  I am fairly
certain if __muldi3 weren't being linked in from libgcc properly,
something would have gone wrong in running the testsuite.  The results 
with a shared libstdc++ were equivalent to that with the archive version.
Thus, I don't see the worse set of problems that you describe with the
hpux 10.20 linker.  Have you a specific example that I can test?

NB: I have installed the longjmp patch to pa.md which is now in the main
branch but not the 2.95 branch, and a configure patch re DCE thread selection
which fixes linking problems when DCE threads are installed.  Thus, some
of the problems previously observed may be fixed.

The situation here is specific to the hpux som linker and its handling
of global data in shared libraries.  If libstdc++ is linked with libgcc
when it is built, this has the unfortunate side effect of linking static
procedures into a final app twice, once from libstdc++ and once from
libgcc.  Both get used.  Which one is selected depends on the calling
path.  If the routine has data which shouldn't be duplicated, disaster
ensues.  In the particalur case studied, it was the global data symbol
"__tic" which caused tinfo2.o to be loaded from libgcc rather than
libstdc++.

Possible solutions as I see it are:

1)	Get HP to fix their linker.  Doesn't seem likely.

2)	Hack libstdc++ so that global data is only accessed in procedures
	with global scope.  This is possible but more complicated than
	3 below.

3)	Don't link the shared version of libstdc++ with libgcc when it
	is built.  I know there were problems on other systems (alpha?)
	when this was done.  This needs to be looked into further under
	hpux but if you check the configuration files for libstdc++ you
	will see that openbsd uses the -nostdlib option when building
	the shared version of libstdc++.

In summary, with the above mentioned patches installed in the gcc-2.95 branch,
I find that the shared libstdc++ v2 is working equivalently to the archive
version.

The situation with the main branch is now under investigation.  However, it
looks like there are other problems which need resolution first.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: g++-mike-eh8-C test failure

[Jeffrey A Law]

  In message < 200005021808.OAA18067@hiauly1.hia.nrc.ca >you write:
  > No.  "-nostdlib" is only used when building the shared varsion of libstdc++
And that is precisely the problem.  That change is _wrong_, no ifs ands or
butts about it.

  > When an app is linked with libstdc++, libgcc is normally included twice in
  > the link (eg., without threads -lgcc -lc -lgcc is automatically included).
  > With the change, I didn't encounter any link problems using the shared
  > version of libstdc++ included with the gcc-2.95 branch except for the
  > one case mentioned which involved threads and profiling.
Consider a shared library that does not appear on the link line, but which
is loaded explicitly by the application.

If the shared library references __muldi3, but the main application and
libraries on the link line for the application do not, then no __main will
be linked into the final executable.

So when you do a shl_load to suck in the shared library we'll have an
undefined reference to __muldi3 and we'll lose badly.


  I am fairly
  > certain if __muldi3 weren't being linked in from libgcc properly,
  > something would have gone wrong in running the testsuite.  The results 
  > with a shared libstdc++ were equivalent to that with the archive version.
  > Thus, I don't see the worse set of problems that you describe with the
  > hpux 10.20 linker.  Have you a specific example that I can test?
See above.

Never assume that just because something passes the testsuite that it is
correct.  There are numerous things the testsuite does not check.


  > 1)	Get HP to fix their linker.  Doesn't seem likely.
  > 
  > 2)	Hack libstdc++ so that global data is only accessed in procedures
  > 	with global scope.  This is possible but more complicated than
  > 	3 below.
  > 
  > 3)	Don't link the shared version of libstdc++ with libgcc when it
  > 	is built.  I know there were problems on other systems (alpha?)
  > 	when this was done.  This needs to be looked into further under
  > 	hpux but if you check the configuration files for libstdc++ you
  > 	will see that openbsd uses the -nostdlib option when building
  > 	the shared version of libstdc++.
4. Build a shared libgcc and have it referenced by either the main program
or the library.  Which is precisely what we're discussing in another thread.

jeff

Re: g++-mike-eh8-C test failure

[John David Anglin]

> Consider a shared library that does not appear on the link line, but which
> is loaded explicitly by the application.
> 
> If the shared library references __muldi3, but the main application and
> libraries on the link line for the application do not, then no __main will
> be linked into the final executable.
> 
> So when you do a shl_load to suck in the shared library we'll have an
> undefined reference to __muldi3 and we'll lose badly.

But if the shared library is complete, we may end up with duplicate code
for __muldi3 and lose anyway.  The HP linker is apparently too dumb to
detect this duplication and I have to wonder if shl_load would do much
better.

I doubt the current link command actually produces a complete libstdc++.
I think -lm is needed.  There is no shared pa1.1 version of libm under
10.20.  So it is possible that there could be problems with duplicating
code here.

Do we really need libstdc++ to work with dlopen/shl_load?   If somebody
does, presumably they could build a special dynamically loadable version
and hack libgcc to remove the duplication.  They could also define a
table of necessary libgcc routines that the app needs to run.  I am
sure somebody could figure out a scheme to do this automatically.

I would argue that there is a simple fix that works with the standard
dynamic loader and thus it should be implemented.  I don't think it is
a big issue to tell people about the restrictions of the implementation.
It's definitely a step up from not working at all.  We seem to be trying
to run before we can walk.

> 4. Build a shared libgcc and have it referenced by either the main program
> or the library.  Which is precisely what we're discussing in another thread.

Building a shared libgcc is a good idea on its own.  However, it might
not resolve this problem.  There still might be duplication of procedures
and problems with libraries that don't have a shared implementation.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: g++-mike-eh8-C test failure

[Jason Merrill]

>>>>> John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

 > But if the shared library is complete, we may end up with duplicate code
 > for __muldi3 and lose anyway.  The HP linker is apparently too dumb to
 > detect this duplication and I have to wonder if shl_load would do much
 > better.

Yes, that's why we want to make libgcc its own shared library, so that
there's only one copy.

 > Do we really need libstdc++ to work with dlopen/shl_load?

Yes.  The folks that initially paid us to make shared libraries work rely
on that functionality.

 >> 4. Build a shared libgcc and have it referenced by either the main
 >> program or the library.  Which is precisely what we're discussing in
 >> another thread.

 > Building a shared libgcc is a good idea on its own.  However, it might
 > not resolve this problem.  There still might be duplication of procedures
 > and problems with libraries that don't have a shared implementation.

Why would there be duplication?

Jason

Re: g++-mike-eh8-C test failure

[John David Anglin]

>  > Building a shared libgcc is a good idea on its own.  However, it might
>  > not resolve this problem.  There still might be duplication of procedures
>  > and problems with libraries that don't have a shared implementation.
> 
> Why would there be duplication?

This is what the HP-UX Linker and Libraries Online User Guide says about the
subject:

Summary of Mixing Shared and Archive Libraries

Applications that depend on shared libraries should not use archive libraries
to satisfy symbol imports in a shared library. This suggests that only a
shared version of libc should be used in applications using shared
libraries. If an archive version of a dependent library must be used, all of its
definitions should be explicitly exported with the -E or +e options to the
linker to avoid multiple definitions.

Providers of shared libraries should make every effort to prevent these
kinds of problems. In particular, if a shared library provider allows
unsatisfied symbols to be satisfied by an archive version of libc, the
application that uses the library may fail if the shared library is later
updated and any new libc dependencies are introduced. New dependencies in
shared libraries can be satisfied by maintaining accurate dependency lists.
However, this can lead to multiple occurrences of the same definition in an
application if the definitions are not explicitly exported.


Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: g++-mike-eh8-C test failure

[Jason Merrill]

>>>>> John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

 >>  > Building a shared libgcc is a good idea on its own.  However, it
 >>  > might not resolve this problem.  There still might be duplication of
 >>  > procedures and problems with libraries that don't have a shared
 >>  > implementation.
 >> 
 >> Why would there be duplication?

 > This is what the HP-UX Linker and Libraries Online User Guide says about
 > the subject:

 > Summary of Mixing Shared and Archive Libraries

 > Applications that depend on shared libraries should not use archive
 > libraries to satisfy symbol imports in a shared library. 

Yes, absolutely.  That's why we're talking about libgcc.sl.  Are you
worried about symbols from libm?

 > This suggests that only a shared version of libc should be used in
 > applications using shared libraries. If an archive version of a
 > dependent library must be used, all of its definitions should be
 > explicitly exported with the -E or +e options to the linker to avoid
 > multiple definitions.

Which suggests that libstdc++.sl should be built with -E.

Jason

Re: g++-mike-eh8-C test failure

[John David Anglin]

>  > Applications that depend on shared libraries should not use archive
>  > libraries to satisfy symbol imports in a shared library. 
> 
> Yes, absolutely.  That's why we're talking about libgcc.sl.  Are you
> worried about symbols from libm?

I looked at that again.  It appears this isn't a problem since the pa1.1
archive version of libm is only used when the link is !shared.

>  > This suggests that only a shared version of libc should be used in
>  > applications using shared libraries. If an archive version of a
>  > dependent library must be used, all of its definitions should be
>  > explicitly exported with the -E or +e options to the linker to avoid
>  > multiple definitions.
> 
> Which suggests that libstdc++.sl should be built with -E.

It's worth a try.  Possibly, this might cause libstdc++.sl to better
advertise the symbols that it depends on from libgcc.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: g++-mike-eh8-C test failure

[John David Anglin]

> Yes, absolutely.  That's why we're talking about libgcc.sl.  Are you
> worried about symbols from libm?
> 
>  > This suggests that only a shared version of libc should be used in
>  > applications using shared libraries. If an archive version of a
>  > dependent library must be used, all of its definitions should be
>  > explicitly exported with the -E or +e options to the linker to avoid
>  > multiple definitions.
> 
> Which suggests that libstdc++.sl should be built with -E.

Tried it.  It doesn't resolve the problem.  According to other documentation,
-E is for exporting symbols from main programs.  +e can be used for exporting
symbols from shared libraries but it hides all the symbols which aren't
explicitly exported.

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: g++-mike-eh8-C test failure

[John David Anglin]

> 4. Build a shared libgcc and have it referenced by either the main program
> or the library.  Which is precisely what we're discussing in another thread.

I hacked the gcc Makefile to build a shared version of libgcc under hpux
10.20.  This was relatively simple to do since all the modules in libgcc
for this target are already PIC.  I did have to change the "-BstageN/"
stuff to "-B$(objdir)/stageN/" so that the compiler would work outside
the gcc build directory.  This resolves the g++-mike-eh8-C and other
related failures in the g++ testsuite.  There were no test regressions
that I could see for any of the other testsuites.

My hacks certainly aren't ready for prime time but they suggest a possible
way to proceed.  There are issues such as versioning and the installation
process which I haven't given much thought to.  Typically, hpux applications
need to be relinked with the installed library before installation.
There is also the question as to whether the dependence of libgcc.sl on
libc should be explicit or not.  The same issue applies to libstdc++.
For most targets, an explicit dependence is specified for libm but not
libc.

I would highly encourage trying to get the build process modified to support
building a shared version of libgcc for the next release.  I am really unhappy
about linking the archive version of libgcc into the shared version libstdc++.

The are a couple of problems that I have noted in the lib and link specs
for pa1.1 machines under hpux 10.20.  The -L libraries for -p and -pg
should preceed the  -L specs for the pa1.1 libraries in the link spec.
Under 10.20, libc_r.sl is just a link to libc in /usr/lib.  There is no
archive version of libc_r.  I don't know about other releases of hpux 10,
but I think this suggests that "-lc" could be used as the lib spec for all
!shared cases.  If libc_r and libc differ on other releases, then libc_r
will still have to be specified for thread usage.  There are subtle issues
regarding which libc is used with a shared libgcc if the dependence on
libc is explicit.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: VAX Ultrix bootstrap failure: Cannot allocate 4072 bytes

[John David Anglin]

> stage1/xgcc -Bstage1/ -B/usr/local/vax-dec-ultrix4.3/bin/ -c  -DIN_GCC    -W -Wall -Wtraditional -pedantic -Wwrite-strings -g -O2 -W -Wall  -DHAVE_CONFIG_H    -I. -I../../gcc -I../../gcc/config -I../../gcc/../include ../../gcc/stmt.c
> 
> Cannot allocate 4072 bytes

Here is a patch to libiberty/xmalloc.c for review and installation.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)


2000-05-18  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* xmalloc.c: Include config.h for HAVE_SBRK definition.

--- libiberty/xmalloc.c.orig	Sat Oct  2 21:55:59 1999
+++ libiberty/xmalloc.c	Thu May 18 13:18:17 2000
@@ -17,6 +17,9 @@
 not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
 Boston, MA 02111-1307, USA.  */
 
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
 #include "ansidecl.h"
 #include "libiberty.h"
 

Re: VAX Ultrix bootstrap failure: Cannot allocate 4072 bytes

[Jeffrey A Law]

  In message < 200005181819.OAA23824@hiauly1.hia.nrc.ca >you write:
  > > stage1/xgcc -Bstage1/ -B/usr/local/vax-dec-ultrix4.3/bin/ -c  -DIN_GCC   
  >  -W -Wall -Wtraditional -pedantic -Wwrite-strings -g -O2 -W -Wall  -DHAVE_C
  > ONFIG_H    -I. -I../../gcc -I../../gcc/config -I../../gcc/../include ../../
  > gcc/stmt.c
  > > 
  > > Cannot allocate 4072 bytes
  > 
  > Here is a patch to libiberty/xmalloc.c for review and installation.
  > 
  > Dave
  > -- 
  > J. David Anglin                                  dave.anglin@nrc.ca
  > National Research Council of Canada              (613) 990-0752 (FAX: 952-6
  > 605)
  > 
  > 
  > 2000-05-18  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
  > 
  > 	* xmalloc.c: Include config.h for HAVE_SBRK definition.
Thanks.  Installed.
jeff

Re: VAX Ultrix bootstrap failure: cc: -o would overwrite

[John David Anglin]

The following patch corrects configure.in so that the proper compiler variable
is tested when checking whether to set NO_MINUS_C_MINUS_O to yes.  Note that
the ${ac_cc} substition has to be done first.

It also adds a test to see if ${CC-cc} supports -Wno-long-long.
If gcc is being used for stage1, the stage1_warn_cflags are set to
" -W -Wall -Wtraditional -pedantic -Wwrite-strings" when gcc doesn't
support -Wno-long-long, and to $(WARN_CFLAGS) when it does.

Please review.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-05-22  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* configure.in: Evaluate the correct variable to test and check for
	-Wno-long-long support.

--- configure.in.orig	Thu May 18 19:41:11 2000
+++ configure.in	Mon May 22 12:07:32 2000
@@ -322,18 +322,32 @@
 # Find the native compiler
 AC_PROG_CC
 AC_PROG_CC_C_O
-if test $ac_cv_prog_cc_${ac_cc}_c_o = no; then
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
   NO_MINUS_C_MINUS_O=yes
 fi
 AC_SUBST(NO_MINUS_C_MINUS_O)
 
 gcc_AC_C_LONG_DOUBLE
 
+AC_MSG_CHECKING(whether ${CC-cc} accepts -Wno-long-long)
+echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -Wno-long-long -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_no_long_long=yes
+else
+  ac_cv_prog_cc_no_long_long=no
+fi
+rm -f conftest*
+echo "$ac_t"$ac_cv_prog_cc_no_long_long 1>&6
+
 # If the native compiler is GCC, we can enable warnings even in stage1.  
 # That's useful for people building cross-compilers, or just running a
 # quick `make'.
 if test "x$GCC" = "xyes"; then 
-  stage1_warn_cflags='$(WARN_CFLAGS)'
+  if test $ac_cv_prog_cc_no_long_long = yes; then
+    stage1_warn_cflags='$(WARN_CFLAGS)'
+  else
+    stage1_warn_cflags=" -W -Wall -Wtraditional -pedantic -Wwrite-strings"
+  fi
 else
   stage1_warn_cflags=""
 fi

Re: VAX Ultrix bootstrap failure: cc: -o would overwrite

[John David Anglin]

Scratch the last.  It isn't correct.

> 
> > This causes us to maintain the warning flag list in two places, one in
> > Makefile.in and one in configure.in.  A better scheme would be to use
> > "sed" to remove -Wno-long-long from WARN_CFLAGS when gcc doesn't
> > support it.  (Look at LOOSE_CFLAGS in gcc/Makefile.in for an example.)
> 
> The sed trick didn't work.  It resulted in multiple commands nested 
> in backquotes.  As a compromise, I reverted to the patch enclosed.
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)
> 
> --- configure.in.orig	Thu May 18 19:41:11 2000
> +++ configure.in	Mon May 22 19:51:24 2000
> @@ -322,18 +322,32 @@
>  # Find the native compiler
>  AC_PROG_CC
>  AC_PROG_CC_C_O
> -if test $ac_cv_prog_cc_${ac_cc}_c_o = no; then
> +if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
>    NO_MINUS_C_MINUS_O=yes
>  fi
>  AC_SUBST(NO_MINUS_C_MINUS_O)
>  
>  gcc_AC_C_LONG_DOUBLE
>  
> +AC_MSG_CHECKING(whether ${CC-cc} accepts -Wno-long-long)
> +echo 'void f(){}' > conftest.c
> +if test -z "`${CC-cc} -Wno-long-long -c conftest.c 2>&1`"; then
> +  ac_cv_prog_cc_no_long_long=yes
> +else
> +  ac_cv_prog_cc_no_long_long=no
> +fi
> +rm -f conftest*
> +echo "$ac_t"$ac_cv_prog_cc_no_long_long 1>&6
> +
>  # If the native compiler is GCC, we can enable warnings even in stage1.  
>  # That's useful for people building cross-compilers, or just running a
>  # quick `make'.
>  if test "x$GCC" = "xyes"; then 
> -  stage1_warn_cflags='$(WARN_CFLAGS)'
> +  if test $ac_cv_prog_cc_no_long_long = yes; then
> +    stage1_warn_cflags='$(WARN_CFLAGS) -Wno-long-long'
> +  else
> +    stage1_warn_cflags='$(WARN_CFLAGS)'
> +  fi
>  else
>    stage1_warn_cflags=""
>  fi
> --- Makefile.in.orig	Fri May 19 23:02:45 2000
> +++ Makefile.in	Mon May 22 19:49:28 2000
> @@ -67,7 +67,8 @@
>  # (And for stage 1 if the native compiler is GCC.)  It is
>  # separate from BOOT_CFLAGS because people tend to override optimization
>  # flags and we'd like them to still have warnings turned on.  They are free
> -# to explicitly turn warnings off if they wish.
> +# to explicitly turn warnings off if they wish.  -Wno-long-long is added
> +# by configure to WARN_CFLAGS if the compiler used for stage1 supports it.
>  # LOOSE_CFLAGS are the CFLAGS to use when compiling something which is only
>  # compiled with gcc, such as libgcc and the frontends other than C.
>  # XCFLAGS is used for most compilations but not when using the GCC just built.
> @@ -76,7 +77,7 @@
>  TCFLAGS =
>  CFLAGS = -g @stage1_warn_cflags@
>  BOOT_CFLAGS = -O2 $(CFLAGS)
> -WARN_CFLAGS = -W -Wall -Wtraditional -pedantic -Wno-long-long -Wwrite-strings
> +WARN_CFLAGS = -W -Wall -Wtraditional -pedantic -Wwrite-strings
>  LOOSE_CFLAGS = `echo $(CFLAGS)|sed -e 's/-pedantic//g' -e 's/-Wtraditional//g'`
>  # These exists to be overridden by the x-* and t-* files, respectively.
>  X_CFLAGS =
> 


-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: VAX Ultrix bootstrap failure with gcc-2.96

[John David Anglin]

> cc1: Invalid option `-Wno-long-long'
> In file included from ../../gcc/cppmain.c:25:
> ../../gcc/cpplib.h:189: warning: ANSI C does not support `long long'

After several false starts, I think the following patch is a reasonable
approach to fixing the problem.  The definition of the warning CFLAGS
for stage 1 and 2 is moved to configure.  The configure code could be
easily modified to support more option tests if that is needed at some
point in the future.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-05-24  J. David Anglin  <dave@hiauly.hia.nrc.ca>

	* configure.in: Check for -Wno-long-long option support and improve
	handling of warning CFLAGS for stages 1 and 2.
	* Makefile.in (WARN_CFLAGS): Move definition to configure.in.
	* configure: Regenerate.

--- configure.in.orig	Wed May 24 12:11:28 2000
+++ configure.in	Wed May 24 12:48:20 2000
@@ -329,15 +329,30 @@
 
 gcc_AC_C_LONG_DOUBLE
 
+AC_MSG_CHECKING(whether ${CC-cc} accepts -Wno-long-long)
+echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -Wno-long-long -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_no_long_long=yes
+else
+  ac_cv_prog_cc_no_long_long=no
+fi
+rm -f conftest*
+echo "$ac_t"$ac_cv_prog_cc_no_long_long 1>&6
+
 # If the native compiler is GCC, we can enable warnings even in stage1.  
 # That's useful for people building cross-compilers, or just running a
 # quick `make'.
+stage1_warn_cflags=" -W -Wall -Wtraditional -pedantic -Wwrite-strings"
+stage2_warn_cflags="$stage1_warn_cflags -Wno-long-long"
 if test "x$GCC" = "xyes"; then 
-  stage1_warn_cflags='$(WARN_CFLAGS)'
+  if test $ac_cv_prog_cc_no_long_long = yes; then
+    stage1_warn_cflags="$stage1_warn_cflags -Wno-long-long"
+  fi
 else
   stage1_warn_cflags=""
 fi
 AC_SUBST(stage1_warn_cflags)
+AC_SUBST(stage2_warn_cflags)
 
 AC_PROG_MAKE_SET
 
--- Makefile.in.orig	Sun May 21 14:10:51 2000
+++ Makefile.in	Wed May 24 12:48:21 2000
@@ -76,7 +76,7 @@
 TCFLAGS =
 CFLAGS = -g @stage1_warn_cflags@
 BOOT_CFLAGS = -O2 $(CFLAGS)
-WARN_CFLAGS = -W -Wall -Wtraditional -pedantic -Wno-long-long -Wwrite-strings
+WARN_CFLAGS = @stage2_warn_cflags@
 LOOSE_CFLAGS = `echo $(CFLAGS)|sed -e 's/-pedantic//g' -e 's/-Wtraditional//g'`
 # These exists to be overridden by the x-* and t-* files, respectively.
 X_CFLAGS =

Re: VAX Ultrix bootstrap failure with gcc-2.96

[Zack Weinberg]

On Wed, May 24, 2000 at 01:25:09PM -0400, John David Anglin wrote:
> > cc1: Invalid option `-Wno-long-long'
> > In file included from ../../gcc/cppmain.c:25:
> > ../../gcc/cpplib.h:189: warning: ANSI C does not support `long long'
> 
> After several false starts, I think the following patch is a reasonable
> approach to fixing the problem.  The definition of the warning CFLAGS
> for stage 1 and 2 is moved to configure.  The configure code could be
> easily modified to support more option tests if that is needed at some
> point in the future.

You might want to turn off -pedantic if -Wno-long-long is not
available, since you will get floods of warnings about long long
otherwise.

Could you move the definition of LOOSE_CFLAGS into configure as well?
This would reduce the number of times sed is executed during the
build.

zw

Re: VAX Ultrix bootstrap failure with gcc-2.96

[John David Anglin]

> You might want to turn off -pedantic if -Wno-long-long is not
> available, since you will get floods of warnings about long long
> otherwise.

You get ~61 warnings.  I also get a whole bunch of `$' in identifier
messages which are also annoying.  I don't think -pedantic provides
a whole lot of useful information.

> Could you move the definition of LOOSE_CFLAGS into configure as well?
> This would reduce the number of times sed is executed during the
> build.

I didn't do this because -pedantic and -traditional are filtered out
even when the user overrides CFLAGS.  If there is agreement that
this behaviour is not required, I will change the patch to also
provide a default for LOOSE_CFLAGS.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: VAX Ultrix bootstrap failure with gcc-2.96

[Zack Weinberg]

On Wed, May 24, 2000 at 04:08:47PM -0400, John David Anglin wrote:
> > You might want to turn off -pedantic if -Wno-long-long is not
> > available, since you will get floods of warnings about long long
> > otherwise.
> 
> You get ~61 warnings.  I also get a whole bunch of `$' in identifier
> messages which are also annoying.  I don't think -pedantic provides
> a whole lot of useful information.

It did catch some real bugs, so I'm not complaining.  What are the
$ in identifier messages complaining about?  It's probably another
warning that should be turned off in system headers, or something like
that.

zw

Re: VAX Ultrix bootstrap failure with gcc-2.96

[John David Anglin]

> It did catch some real bugs, so I'm not complaining.  What are the
> $ in identifier messages complaining about?  It's probably another
> warning that should be turned off in system headers, or something like
> that.

The $ in identifier messages are complaining about lines like

#if     defined(__GFLOAT) || CC$gfloat

which occur in limits.h (syslimits.h) and math.h in the gcc include
directory.  The identifier CC$gfloat is something the VAX ANSI C
compiler defines.  Probably, this should be nuked when the includes
are fixed.  It obviously isn't needed in the gcc include directory.

Another small related issue is that gcc should define __GFLOAT
in addition to GFLOAT when the -mg option is used.  I have edited
my specs file to do this.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: VAX Ultrix bootstrap failure with gcc-2.96

[Zack Weinberg]

On Thu, May 25, 2000 at 10:20:54PM -0400, John David Anglin wrote:
> > It did catch some real bugs, so I'm not complaining.  What are the
> > $ in identifier messages complaining about?  It's probably another
> > warning that should be turned off in system headers, or something like
> > that.
> 
> The $ in identifier messages are complaining about lines like
> 
> #if     defined(__GFLOAT) || CC$gfloat
> 
> which occur in limits.h (syslimits.h) and math.h in the gcc include
> directory.  The identifier CC$gfloat is something the VAX ANSI C
> compiler defines.  Probably, this should be nuked when the includes
> are fixed.  It obviously isn't needed in the gcc include directory.

I agree.  Could you come up with an entry for inclhack.def?  It will
be easier for you since you have access to the header files.  I'll
guess at an appropriate pattern:

fix = {
  hackname = vax_math_ifdefs;
  files = limits.h;
  files = math.h;
  select = "^#if.*||[ \t]+CC$[a-z]+";
  sed = "/^#if/s/||[ \t][ \t]*CC$[a-z][a-z]*//g";
};

This will undoubtedly need refinement to do the right thing in all cases.

> Another small related issue is that gcc should define __GFLOAT
> in addition to GFLOAT when the -mg option is used.  I have edited
> my specs file to do this.

Patch for config/vax/*.h, please?

zw

Re: VAX Ultrix bootstrap failure with gcc-2.96

[John David Anglin]

> > Another small related issue is that gcc should define __GFLOAT
> > in addition to GFLOAT when the -mg option is used.  I have edited
> > my specs file to do this.
> 
> Patch for config/vax/*.h, please?

See below.

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-05025  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* vax.h (CPP_SPEC): Define __GFLOAT and GFLOAT when -mg is specified.

--- vax.h.orig	Sun Feb 27 20:41:06 2000
+++ vax.h	Thu May 25 22:54:07 2000
@@ -26,7 +26,7 @@
 
 /* If using g-format floating point, alter math.h.  */
 
-#define	CPP_SPEC "%{mg:-DGFLOAT}"
+#define	CPP_SPEC "%{mg:-DGFLOAT -D__GFLOAT}"
 
 /* Choose proper libraries depending on float format.
    Note that there are no profiling libraries for g-format.

Re: VAX Ultrix bootstrap failure with gcc-2.96

[Zack Weinberg]

On Thu, May 25, 2000 at 11:05:14PM -0400, John David Anglin wrote:
> > > Another small related issue is that gcc should define __GFLOAT
> > > in addition to GFLOAT when the -mg option is used.  I have edited
> > > my specs file to do this.
> > 
> > Patch for config/vax/*.h, please?
> 
> See below.
...
> +#define	CPP_SPEC "%{mg:-DGFLOAT -D__GFLOAT}"

Thanks - I wasn't sure if this was the only place affected.  It needs
an additional test to get rid of -DGFLOAT in -ansi mode:

#define		CPP_SPEC "%{mg:%{!ansi:-DGFLOAT} -D__GFLOAT}"

I will apply your patch with this change.

zw

Re: VAX Ultrix bootstrap failure with gcc-2.96

[John David Anglin]

> > The $ in identifier messages are complaining about lines like
> > 
> > #if     defined(__GFLOAT) || CC$gfloat
> > 
> > which occur in limits.h (syslimits.h) and math.h in the gcc include
> > directory.  The identifier CC$gfloat is something the VAX ANSI C
> > compiler defines.  Probably, this should be nuked when the includes
> > are fixed.  It obviously isn't needed in the gcc include directory.
> 
> I agree.  Could you come up with an entry for inclhack.def?  It will
> be easier for you since you have access to the header files.  I'll
> guess at an appropriate pattern:
> 
> fix = {
>   hackname = vax_math_ifdefs;
>   files = limits.h;
>   files = math.h;
>   select = "^#if.*||[ \t]+CC$[a-z]+";
>   sed = "/^#if/s/||[ \t][ \t]*CC$[a-z][a-z]*//g";
> };
> 
> This will undoubtedly need refinement to do the right thing in all cases.

Here is a patch for the above and also a number of other include hacks
which I have found over the years.  I have tried to ensure that the additions
will not conflict with headers on other systems.  In some cases, it is
possible select is overly restrictive.

The VAX Ultrix version of float.h contains the identifier CC$gfloat.  However,
float.h is replaced by a version generated by enquire.  The enquire version
doesn't contain GFLOAT support.  I will try to build a GFLOAT version
of enquire and merge the two if possible.  It should be a good test of
the GFLOAT capability of gcc.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

--- sys-protos.h.orig	Wed Dec 16 15:58:24 1998
+++ sys-protos.h	Fri Jun  2 13:00:45 2000
@@ -445,7 +445,11 @@
 extern struct group *         getgrent(void);
 extern struct group *         getgrgid(gid_t);
 extern struct group *         getgrnam(const char *);
+#ifdef bsd4_2 /* ??? */
+extern int                    getgroups(int, int *);
+#else
 extern int                    getgroups(int, gid_t *);
+#endif
 extern struct hostent *       gethostbyaddr(/* ??? */);
 extern struct hostent *       gethostbyname(/* ??? */);
 extern struct hostent *       gethostent(/* ??? */);
--- fixinc/inclhack.def.orig	Fri Jun  2 10:43:12 2000
+++ fixinc/inclhack.def	Fri Jun  2 13:07:36 2000
@@ -517,6 +517,65 @@
 
 
 /*
+ *  The VAX Ultrix 4.3 file limits.h is a symbolic link to sys/limits.h.
+ *  Replace limits.h with a file that includes sys/limits.h.
+ */
+fix = {
+    hackname = AAB_ultrix_limits;
+    files    = limits.h;
+    mach     = "vax-*-ultrix*";
+    replace  =
+'/*	@(#)limits.h				*/
+/* This file was generated by fixincludes	*/
+\#ifndef _LIMITS_INCLUDED
+\#define _LIMITS_INCLUDED
+\#include <sys/limits.h>
+\#endif /* _LIMITS_INCLUDED */
+';
+};
+
+
+/*
+ *  The VAX ULTRIX 4.3 version of memory.h duplicates definitions
+ *  present in strings.h.  Replace memory.h with a file that includes
+ *  strings.h to prevent problems from multiple inclusion.
+ */
+fix = {
+    hackname = AAB_ultrix_memory;
+    files    = memory.h;
+    mach     = "vax-*-ultrix*";
+    replace  =
+'/*	@(#)memory.h				*/
+/* This file was generated by fixincludes	*/
+\#ifndef _MEMORY_INCLUDED
+\#define _MEMORY_INCLUDED
+\#include <strings.h>
+\#endif /* _MEMORY_INCLUDED */
+';
+};
+
+
+/*
+ *  The VAX Ultrix 4.3 file string.h is a symbolic link to strings.h.
+ *  Replace string.h link with a file that includes strings.h to prevent
+ *  problems from multiple inclusion.
+ */
+fix = {
+    hackname = AAB_ultrix_string;
+    files    = string.h;
+    mach     = "vax-*-ultrix*";
+    replace  =
+'/*	@(#)string.h				*/
+/* This file was generated by fixincludes	*/
+\#ifndef _STRING_INCLUDED
+\#define _STRING_INCLUDED
+\#include <strings.h>
+\#endif /* _STRING_INCLUDED */
+';
+};
+
+
+/*
  *  sys/wait.h on AIX 3.2.5 puts the declaration of wait3 before the
  *  definition of struct rusage, so the prototype added by fixproto fails.
  */
@@ -1495,7 +1554,9 @@
 fix = {
     hackname = nested_ultrix;
     files    = rpc/svc.h;
+    files    = sys/ioctl.h;
     sed      = "s@^\\( \\*\tint protocol;  \\)/\\*@\\1*/ /*@";
+    sed      = "/^\\/\\* #define SIOCSCREEN/s@/\\* screend@*//* screend@";
 };
 
 
@@ -2695,6 +2756,24 @@
 
 
 /*
+ *  Add missing prototype for lstat and define for S_ISLNK
+ *  in Ultrix V4.3 sys/stat.h.
+ */
+fix = {
+    hackname = ultrix_stat;
+    files  = sys/stat.h;
+    select = "@\\(#\\)stat\\.h.*6\\.1.*\\(ULTRIX\\)";
+    sed    = "/^#define[ \t]S_IFPORT[ \t]*S_IFIFO$/a\\\n"
+		"\\\n"
+		"/* macro to test for symbolic link */\\\n"
+		"#define S_ISLNK(mode) (((mode) & S_IFMT) == S_IFLNK)\\\n"
+		"\n";
+    sed    = "/^[ \t]*fstat(),$/a\\\n"
+		"\tlstat(),\n";
+};
+
+
+/*
  *  Check for superfluous `static' (in Ultrix 4.2)
  *  On Ultrix 4.3, includes of other files (r3_cpu.h,r4_cpu.h) is broken.
  */
@@ -2709,6 +2788,21 @@
 
 
 /*
+ *  Add once-only latch to Ultrix V4.3 strings.h.
+ */
+fix = {
+    hackname = ultrix_strings;
+    files  = strings.h;
+    select = "@\\(#\\)strings\\.h.*6\\.1.*\\(ULTRIX\\)";
+    sed    = "/^#ifndef[ \t]_SIZE_T_$/i\\\n"
+		"#ifndef _STRINGS_INCLUDED\\\n"
+		"#define _STRINGS_INCLUDED\n";
+    sed    = "/^#endif.*__STDC__.*\\/$/a\\\n"
+		"#endif /* _STRINGS_INCLUDED */\n";
+};
+
+
+/*
  *  Fix multiple defines for NULL.  Sometimes, we stumble into \r\n
  *  terminated lines, so accommodate these.  Test both ways.
  */
@@ -2791,6 +2885,19 @@
 };
 
 
+/*
+ * Strip "|| CC$gfloat" from VAX Ultrix math headers.
+ */
+fix = {
+  hackname = vax_ultrix_math_ifdef;
+  files = float.h;
+  files = math.h;
+  files = sys/limits.h;
+  select = "^#if.*\\|\\|[ \t]+CC\\$[a-z]+";
+  sed = "/^#if/s/||[ \t][ \t]*CC$[a-z][a-z]*//";
+};
+
+
 /*
  *  Make VxWorks header which is almost gcc ready fully gcc ready.
  */

Re: VAX Ultrix bootstrap failure with gcc-2.96

[John David Anglin]

> You might want to turn off -pedantic if -Wno-long-long is not
> available, since you will get floods of warnings about long long
> otherwise.

Patch revised to only use -pedantic during stage 1 if the -Wno-long-long
option is supported.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-05-24  J. David Anglin  <dave@hiauly.hia.nrc.ca>

	* configure.in: Check for -Wno-long-long option support and improve
	handling of warning CFLAGS for stages 1 and 2.
	* Makefile.in (WARN_CFLAGS): Move definition to configure.in.
	* configure: Regenerate.

--- configure.in.orig	Wed May 24 12:11:28 2000
+++ configure.in	Wed May 24 16:59:05 2000
@@ -329,15 +329,30 @@
 
 gcc_AC_C_LONG_DOUBLE
 
+AC_MSG_CHECKING(whether ${CC-cc} accepts -Wno-long-long)
+echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -Wno-long-long -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_no_long_long=yes
+else
+  ac_cv_prog_cc_no_long_long=no
+fi
+rm -f conftest*
+echo "$ac_t"$ac_cv_prog_cc_no_long_long 1>&6
+
 # If the native compiler is GCC, we can enable warnings even in stage1.  
 # That's useful for people building cross-compilers, or just running a
 # quick `make'.
+stage1_warn_cflags=" -W -Wall -Wtraditional -Wwrite-strings"
+stage2_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long"
 if test "x$GCC" = "xyes"; then 
-  stage1_warn_cflags='$(WARN_CFLAGS)'
+  if test $ac_cv_prog_cc_no_long_long = yes; then
+    stage1_warn_cflags="$stage1_warn_cflags -pedantic -Wno-long-long"
+  fi
 else
   stage1_warn_cflags=""
 fi
 AC_SUBST(stage1_warn_cflags)
+AC_SUBST(stage2_warn_cflags)
 
 AC_PROG_MAKE_SET
 
--- Makefile.in.orig	Sun May 21 14:10:51 2000
+++ Makefile.in	Wed May 24 12:48:21 2000
@@ -76,7 +76,7 @@
 TCFLAGS =
 CFLAGS = -g @stage1_warn_cflags@
 BOOT_CFLAGS = -O2 $(CFLAGS)
-WARN_CFLAGS = -W -Wall -Wtraditional -pedantic -Wno-long-long -Wwrite-strings
+WARN_CFLAGS = @stage2_warn_cflags@
 LOOSE_CFLAGS = `echo $(CFLAGS)|sed -e 's/-pedantic//g' -e 's/-Wtraditional//g'`
 # These exists to be overridden by the x-* and t-* files, respectively.
 X_CFLAGS =

Re: VAX Ultrix bootstrap failure with gcc-2.96

[Jeffrey A Law]

  In message < 200005242109.RAA11597@hiauly1.hia.nrc.ca >you write:
  > > You might want to turn off -pedantic if -Wno-long-long is not
  > > available, since you will get floods of warnings about long long
  > > otherwise.
  > 
  > Patch revised to only use -pedantic during stage 1 if the -Wno-long-long
  > option is supported.
  > 
  > Dave
  > -- 
  > J. David Anglin                                  dave.anglin@nrc.ca
  > National Research Council of Canada              (613) 990-0752 (FAX: 952-6
  > 605)
  > 
  > 2000-05-24  J. David Anglin  <dave@hiauly.hia.nrc.ca>
  > 
  > 	* configure.in: Check for -Wno-long-long option support and improve
  > 	handling of warning CFLAGS for stages 1 and 2.
  > 	* Makefile.in (WARN_CFLAGS): Move definition to configure.in.
  > 	* configure: Regenerate.
Thanks.  Installed.
jeff

Re: VAX Ultrix bootstrap with gcc-2.96 20000519: genrecog failure

[Richard Henderson]

On Sat, May 27, 2000 at 05:38:48PM -0400, John David Anglin wrote:
> In looking at function.c (expand_function_end), I can't see how struct
> returns every worked in this situation:

The code in this area has changed quite a bit over the past year.
It's possible that it didn't work before the changes, or that it
worked by accident, or that I really did mess up.

> The movq is generated by line 6673 of function.c.   However, doesn't
> something need to be done to get it into current_function_return_rtx?

I don't think it's supposed to.  Looking at where that value gets
loaded up, it appears that diddle_return_value isn't handling this
case correctly.

I've given i386 and sparc64 output (to pick two other styles of struct
return at random) a quick glance, and nothing appears to be broken by
this change; I'll wait for a complete bootstrap and test cycle to be sure.


r~


	* function.c (diddle_return_value): A pcc-style struct return
	returns a pointer.

Index: function.c
===================================================================
RCS file: /cvs/gcc/egcs/gcc/function.c,v
retrieving revision 1.199
diff -c -p -d -r1.199 function.c
*** function.c	2000/05/27 20:10:38	1.199
--- function.c	2000/05/28 02:50:35
*************** diddle_return_value (doit, arg)
*** 6319,6332 ****
       void *arg;
  {
    rtx outgoing = current_function_return_rtx;
  
    if (! outgoing)
      return;
  
!   if (GET_CODE (outgoing) == REG
!       && REGNO (outgoing) >= FIRST_PSEUDO_REGISTER)
      {
        tree type = TREE_TYPE (DECL_RESULT (current_function_decl));
  #ifdef FUNCTION_OUTGOING_VALUE
        outgoing = FUNCTION_OUTGOING_VALUE (type, current_function_decl);
  #else
--- 6319,6343 ----
       void *arg;
  {
    rtx outgoing = current_function_return_rtx;
+   int pcc;
  
    if (! outgoing)
      return;
  
!   pcc = (current_function_returns_struct
!          || current_function_returns_pcc_struct);
! 
!   if ((GET_CODE (outgoing) == REG
!        && REGNO (outgoing) >= FIRST_PSEUDO_REGISTER)
!       || pcc)
      {
        tree type = TREE_TYPE (DECL_RESULT (current_function_decl));
+ 
+       /* A PCC-style return returns a pointer to the memory in which
+ 	 the structure is stored.  */
+       if (pcc)
+ 	type = build_pointer_type (type);
+ 
  #ifdef FUNCTION_OUTGOING_VALUE
        outgoing = FUNCTION_OUTGOING_VALUE (type, current_function_decl);
  #else

Re: VAX Ultrix bootstrap with gcc-2.96 20000519: genrecog failure

[John David Anglin]

The patch fixed the missing return value in my test program.  Hopefully,
it will allow the build to complete.

Thanks,
Dave

> 
> On Sat, May 27, 2000 at 05:38:48PM -0400, John David Anglin wrote:
> > In looking at function.c (expand_function_end), I can't see how struct
> > returns every worked in this situation:
> 
> The code in this area has changed quite a bit over the past year.
> It's possible that it didn't work before the changes, or that it
> worked by accident, or that I really did mess up.
> 
> > The movq is generated by line 6673 of function.c.   However, doesn't
> > something need to be done to get it into current_function_return_rtx?
> 
> I don't think it's supposed to.  Looking at where that value gets
> loaded up, it appears that diddle_return_value isn't handling this
> case correctly.
> 
> I've given i386 and sparc64 output (to pick two other styles of struct
> return at random) a quick glance, and nothing appears to be broken by
> this change; I'll wait for a complete bootstrap and test cycle to be sure.
> 
> 
> r~
> 
> 
> 	* function.c (diddle_return_value): A pcc-style struct return
> 	returns a pointer.
> 
> Index: function.c
> ===================================================================
> RCS file: /cvs/gcc/egcs/gcc/function.c,v
> retrieving revision 1.199
> diff -c -p -d -r1.199 function.c
> *** function.c	2000/05/27 20:10:38	1.199
> --- function.c	2000/05/28 02:50:35
> *************** diddle_return_value (doit, arg)
> *** 6319,6332 ****
>        void *arg;
>   {
>     rtx outgoing = current_function_return_rtx;
>   
>     if (! outgoing)
>       return;
>   
> !   if (GET_CODE (outgoing) == REG
> !       && REGNO (outgoing) >= FIRST_PSEUDO_REGISTER)
>       {
>         tree type = TREE_TYPE (DECL_RESULT (current_function_decl));
>   #ifdef FUNCTION_OUTGOING_VALUE
>         outgoing = FUNCTION_OUTGOING_VALUE (type, current_function_decl);
>   #else
> --- 6319,6343 ----
>        void *arg;
>   {
>     rtx outgoing = current_function_return_rtx;
> +   int pcc;
>   
>     if (! outgoing)
>       return;
>   
> !   pcc = (current_function_returns_struct
> !          || current_function_returns_pcc_struct);
> ! 
> !   if ((GET_CODE (outgoing) == REG
> !        && REGNO (outgoing) >= FIRST_PSEUDO_REGISTER)
> !       || pcc)
>       {
>         tree type = TREE_TYPE (DECL_RESULT (current_function_decl));
> + 
> +       /* A PCC-style return returns a pointer to the memory in which
> + 	 the structure is stored.  */
> +       if (pcc)
> + 	type = build_pointer_type (type);
> + 
>   #ifdef FUNCTION_OUTGOING_VALUE
>         outgoing = FUNCTION_OUTGOING_VALUE (type, current_function_decl);
>   #else
> 


-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: VAX Ultrix bootstrap failure with gcc-2.96

[John David Anglin]

> The VAX Ultrix version of float.h contains the identifier CC$gfloat.  However,
> float.h is replaced by a version generated by enquire.  The enquire version
> doesn't contain GFLOAT support.  I will try to build a GFLOAT version
> of enquire and merge the two if possible.  It should be a good test of
> the GFLOAT capability of gcc.

"-mg" didn't work.  It looks like the format of the TARGET_SWITCHES
macro needs updating in vax.h.  This is the current definition:

#define TARGET_SWITCHES  \
  { {"unix", 1},  \
    {"gnu", -1},  \
    {"vaxc-alignment", 2}, \
    {"g", 4}, \
    {"g-float", 4}, \
    {"d", -4},  \
    {"d-float", -4}, \
    { "", TARGET_DEFAULT}}

Other machines have a third comment field for each switch.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: VAX Ultrix bootstrap failure with gcc-2.96

[John David Anglin]

> "-mg" didn't work.  It looks like the format of the TARGET_SWITCHES
> macro needs updating in vax.h.  This is the current definition:

Gcc is outputing G floating point code, so the lack of comments in the
TARGET_SWITCHES definition is not the problem.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Evaluation order of &&s in ||, in macro INDEX_TERM_P, in vax.h

[John David Anglin]

> The following patch to vax.h squashes a few warnings about &&s in ||,
> and might slightly improve the code generated by the INDEX_TERM_P macro.

Revised the patch to squelch signed/unsigned warnings from comparision.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-06-12  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* vax.h (INDEX_TERM_P): Define evaluation order of &&'s in || and
	cast to squelch signed/unsigned warnings.

--- vax.h.orig	Fri May 26 13:10:48 2000
+++ vax.h	Mon Jun 12 11:10:46 2000
@@ -731,15 +731,15 @@
  : (GET_CODE (PROD) == MULT						\
     &&									\
     (xfoo0 = XEXP (PROD, 0), xfoo1 = XEXP (PROD, 1),			\
-     ((GET_CODE (xfoo0) == CONST_INT					\
-       && INTVAL (xfoo0) == GET_MODE_SIZE (MODE)			\
-       && GET_CODE (xfoo1) == REG					\
-       && REG_OK_FOR_INDEX_P (xfoo1))					\
-      ||								\
-      (GET_CODE (xfoo1) == CONST_INT					\
-       && INTVAL (xfoo1) == GET_MODE_SIZE (MODE)			\
-       && GET_CODE (xfoo0) == REG					\
-       && REG_OK_FOR_INDEX_P (xfoo0))))))
+     ((((GET_CODE (xfoo0) == CONST_INT					\
+         && GET_CODE (xfoo1) == REG)					\
+         && INTVAL (xfoo0) == (int)GET_MODE_SIZE (MODE))		\
+         && REG_OK_FOR_INDEX_P (xfoo1))					\
+        ||								\
+      (((GET_CODE (xfoo1) == CONST_INT					\
+         && GET_CODE (xfoo0) == REG)					\
+         && INTVAL (xfoo1) == (int)GET_MODE_SIZE (MODE))		\
+         && REG_OK_FOR_INDEX_P (xfoo0))))))
 
 /* Go to ADDR if X is the sum of a register
    and a valid index term for mode MODE.  */

Re: Evaluation order of &&s in ||, in macro INDEX_TERM_P, in vax.h

[Jeffrey A Law]

  In message < 200006121518.LAA09064@hiauly1.hia.nrc.ca >you write:
  > > The following patch to vax.h squashes a few warnings about &&s in ||,
  > > and might slightly improve the code generated by the INDEX_TERM_P macro.
  > 
  > Revised the patch to squelch signed/unsigned warnings from comparision.
  > 
  > Dave
  > -- 
  > J. David Anglin                                  dave.anglin@nrc.ca
  > National Research Council of Canada              (613) 990-0752 (FAX: 952-6
  > 605)
  > 
  > 2000-06-12  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
  > 
  > 	* vax.h (INDEX_TERM_P): Define evaluation order of &&'s in || and
  > 	cast to squelch signed/unsigned warnings.
Thanks.  Installed.

jeff

Re: VAX Ultrix bootstrap failure with gcc-2.96

[John David Anglin]

I have run a complete bootstrap cycle with this patch under hpux 10.20.
Please review for installation.

Dave

> 
> > Yes, I understand the namespace pollution issue.  I think the solution
> > that Dave is working on will not leave GETGROUPS_T in unistd.h, but I
> > have yet to actually see it. :-)
> 
> Here is the patch for review.
> 
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)
> 
> 2000-06-16  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* Makefile.in (TARGET_GETGROUPS_T): New configuration variable.
> 	* configure.in (TARGET_GETGROUPS_T): Evaluate.
> 	* sys-protos.h (getgroups): Use TARGET_GETGROUPS_T for array type
> 	of second argument of getgroups.
> 	* configure, config.in: Rebuilt.
> 
> --- Makefile.in.orig	Thu Jun 15 19:15:07 2000
> +++ Makefile.in	Thu Jun 15 19:26:43 2000
> @@ -130,6 +130,9 @@
>    [ -f $(RANLIB) ] \
>    || [ -f /usr/bin/ranlib -o -f /bin/ranlib ]
>  
> +# Substitution type for target's getgroups 2nd arg.
> +TARGET_GETGROUPS_T = @TARGET_GETGROUPS_T@
> +
>  # Compiler to use for compiling libgcc1.a.
>  # OLDCC should not be the GNU C compiler,
>  # since that would compile typical libgcc1.a functions such as mulsi3
> @@ -1839,7 +1842,8 @@
>  SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \
>     stmp-int-hdrs
>  	-rm -f SYSCALLS.c tmp-SYSCALLS.s
> -	cat $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c
> +	sed -e s/TARGET_GETGROUPS_T/$(TARGET_GETGROUPS_T)/ \
> +	  $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c
>  	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
>  	  -aux-info $@ -S -o tmp-SYSCALLS.s SYSCALLS.c
>  	-rm -f SYSCALLS.c tmp-SYSCALLS.s
> @@ -1996,7 +2000,8 @@
>  	$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c
>  
>  xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
> -	cat deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
> +	sed -e s/TARGET_GETGROUPS_T/$(TARGET_GETGROUPS_T)/ \
> +	  deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
>  	mv tmp-fixtmp.c fixtmp.c
>  	$(GCC_FOR_TARGET) fixtmp.c -w -U__SIZE_TYPE__ -U__PTRDIFF_TYPE__ -U__WCHAR_TYPE__ -E \
>  	  | sed -e 's/	/ /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \
> --- configure.in.orig	Thu Jun 15 18:24:15 2000
> +++ configure.in	Thu Jun 15 21:06:05 2000
> @@ -480,6 +480,26 @@
>  
>  AC_CHECK_TYPE(ssize_t, int)
>  
> +# Try to determine the array type of the second argument of getgroups
> +# for the target system (int or gid_t).
> +AC_TYPE_GETGROUPS
> +if test "${target}" = "${build}"; then
> +  TARGET_GETGROUPS_T=$ac_cv_type_getgroups
> +else
> +  case "${target}" in
> +	# This condition may need some tweaking.  It should include all
> +	# targets where the array type of the second argument of getgroups
> +	# is int and the type of gid_t is not equivalent to int.
> +	*-*-sunos* | *-*-ultrix*)
> +		TARGET_GETGROUPS_T=int
> +		;;
> +	*)
> +		TARGET_GETGROUPS_T=gid_t
> +		;;
> +  esac
> +fi
> +AC_SUBST(TARGET_GETGROUPS_T)
> +
>  gcc_AC_FUNC_VFPRINTF_DOPRNT
>  gcc_AC_FUNC_PRINTF_PTR
>  
> --- sys-protos.h.orig	Thu Jun 15 00:01:55 2000
> +++ sys-protos.h	Thu Jun 15 19:43:49 2000
> @@ -445,7 +445,7 @@
>  extern struct group *         getgrent(void);
>  extern struct group *         getgrgid(gid_t);
>  extern struct group *         getgrnam(const char *);
> -extern int                    getgroups(int, gid_t *);
> +extern int                    getgroups(int, TARGET_GETGROUPS_T []);
>  extern struct hostent *       gethostbyaddr(/* ??? */);
>  extern struct hostent *       gethostbyname(/* ??? */);
>  extern struct hostent *       gethostent(/* ??? */);
> 


-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: VAX Ultrix bootstrap failure with gcc-2.96

[Bruce Korb]

John David Anglin wrote:
> 
> I have run a complete bootstrap cycle with this patch under hpux 10.20.
> Please review for installation.

I tried it on OSR5.  It is a more finicky than normal platform.
It works.

Re: collect2: ld terminated with signal 10 [Bus error]

[John David Anglin]

> 
> With todays CVS and binutils 2.10.90, the following occurs executing the
> libio hounddog.exp under hppa1.1-hp-hpux10.20:
> 
> Running ../../../../libio/testsuite/libio.tests/hounddog.exp ...
> Executing on host: /xxx/gnu/gcc-2.96/objdir/gcc/xgcc -B/xxx/gnu/gcc-2.96/objdir/gcc/ ../../../../libio/testsuite/../tests/hounddog.cc  -O3 -I.. -I../../../../libio/testsuite/..  -nostdinc++ -I/xxx/gnu/gcc-2.96/libstdc++ -I/xxx/gnu/gcc-2.96/libstdc++/stl -L/xxx/gnu/gcc-2.96/objdir/hppa1.1-hp-hpux10.20/threads/libstdc++ -L/xxx/gnu/gcc-2.96/objdir/hppa1.1-hp-hpux10.20/threads/libiberty  -L/xxx/gnu/gcc-2.96/objdir/hppa1.1-hp-hpux10.20/threads/libiberty -g  -lstdc++ -liberty -lm -threads -o /xxx/gnu/gcc-2.96/objdir/hppa1.1-hp-hpux10.20/libio/testsuite/hounddog    (timeout = 300)
> <command line>: warning: The C standard requires whitespace after #define __STDC_EXT__
> collect2: ld terminated with signal 10 [Bus error]
> /usr/ccs/bin/ld: Unsatisfied symbols:
>    bad_typeid virtual table(data)

Here is a patch to fix the problem related the above unsatisfied symbol.
Under hpux, weak (sdef) data symbols need to be .EXPORT'd or else they
are local.  The code in varasm.c implicitly assumes that weak symbols
are global.

With this patch, weak symbol support now works under hpux 10.20.  Yeah!

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-06-27  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa/som.h (ASM_WEAKEN_LABEL): Export weak data symbols so that they
	have global scope.

--- som.h.orig	Tue Jun 27 12:57:31 2000
+++ som.h	Tue Jun 27 13:14:04 2000
@@ -384,6 +384,14 @@
 /* This is how we tell the assembler that a symbol is weak.  */
 
 #define ASM_WEAKEN_LABEL(FILE,NAME) \
-  do { fputs ("\t.weak\t", FILE); assemble_name (FILE, NAME); \
-       fputc ('\n', FILE); } while (0)
+  do { fputs ("\t.weak\t", FILE); \
+       assemble_name (FILE, NAME); \
+       fputc ('\n', FILE); \
+       if (! FUNCTION_NAME_P (NAME)) \
+         { \
+           fputs ("\t.EXPORT ", FILE); \
+           assemble_name (FILE, NAME); \
+           fputs (",DATA\n", FILE); \
+         } \
+  } while (0)
 #endif

Re: collect2: ld terminated with signal 10 [Bus error]

[Jeffrey A Law]

  In message < 200006291650.MAA20413@hiauly1.hia.nrc.ca >you write:
  > > 
  > > With todays CVS and binutils 2.10.90, the following occurs executing the
  > > libio hounddog.exp under hppa1.1-hp-hpux10.20:
  > > 
  > > Running ../../../../libio/testsuite/libio.tests/hounddog.exp ...
  > > Executing on host: /xxx/gnu/gcc-2.96/objdir/gcc/xgcc -B/xxx/gnu/gcc-2.96/
  > objdir/gcc/ ../../../../libio/testsuite/../tests/hounddog.cc  -O3 -I.. -I..
  > /../../../libio/testsuite/..  -nostdinc++ -I/xxx/gnu/gcc-2.96/libstdc++ -I/
  > xxx/gnu/gcc-2.96/libstdc++/stl -L/xxx/gnu/gcc-2.96/objdir/hppa1.1-hp-hpux10
  > .20/threads/libstdc++ -L/xxx/gnu/gcc-2.96/objdir/hppa1.1-hp-hpux10.20/threa
  > ds/libiberty  -L/xxx/gnu/gcc-2.96/objdir/hppa1.1-hp-hpux10.20/threads/libib
  > erty -g  -lstdc++ -liberty -lm -threads -o /xxx/gnu/gcc-2.96/objdir/hppa1.1
  > -hp-hpux10.20/libio/testsuite/hounddog    (timeout = 300)
  > > <command line>: warning: The C standard requires whitespace after #define
  >  __STDC_EXT__
  > > collect2: ld terminated with signal 10 [Bus error]
  > > /usr/ccs/bin/ld: Unsatisfied symbols:
  > >    bad_typeid virtual table(data)
  > 
  > Here is a patch to fix the problem related the above unsatisfied symbol.
  > Under hpux, weak (sdef) data symbols need to be .EXPORT'd or else they
  > are local.  The code in varasm.c implicitly assumes that weak symbols
  > are global.
  > 
  > With this patch, weak symbol support now works under hpux 10.20.  Yeah!
  > 
  > Dave
  > -- 
  > J. David Anglin                                  dave.anglin@nrc.ca
  > National Research Council of Canada              (613) 990-0752 (FAX: 952-6
  > 605)
  > 
  > 2000-06-27  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
  > 
  > 	* pa/som.h (ASM_WEAKEN_LABEL): Export weak data symbols so that they
  > 	have global scope.
Thanks.  Installed.

jeff

Patches: Re: libio testsuite: timeout compiling tFile.cc

[John David Anglin]

Here are patches that allow the libio testsuite to run successfully under
hpux 10.20 on a slow machine.  Please review.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-08-30  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* lib/libio.exp: Don't inline functions to allow libio tests to work
	in a reasonable time on machines that are slow or have small memories.

--- lib/libio.exp.orig	Wed Jun 23 08:10:00 1999
+++ lib/libio.exp	Wed Aug 30 19:55:23 2000
@@ -57,7 +57,7 @@
 
     set args ""
     set ld_library_path ""
-    lappend args "additional_flags=-O3";
+    lappend args "additional_flags=-O3 -fno-inline";
     lappend args "additional_flags=-I.. -I$srcdir/.."
     lappend args "additional_flags=$wrap_compile_flags";
     lappend args "libs=$wrapper_file";

2000-08-30  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* tfformat.c: Don't include stdlib.h for exit if TEST_LIBIO or
	__cplusplus are defined.

--- tfformat.c.orig	Tue May 23 17:33:18 2000
+++ tfformat.c	Wed Aug 30 20:23:16 2000
@@ -1,15 +1,18 @@
 #ifdef TEST_LIBIO
 #include <iostdio.h>
+extern void exit ();
 #else
 #ifdef __cplusplus
 #include <strstream.h>
+extern "C" {
+  extern void exit (int);
+}
 #else
 #include <stdio.h>
+#include <stdlib.h>	/* for exit */
 #endif
 #endif /* !TEST_LIBIO */
 
-#include <stdlib.h>	/* for exit */
-
 /* Tests taken from Cygnus C library. */
 
 typedef struct

Patch: Re: objc FAILs under hpux/-threads with gcc-2.96 CVS 20000816

[John David Anglin]

> 		=== objc Summary for unix/-threads ===
> 
> # of expected passes		22
> # of unexpected failures	22

The enclosed patch corrects the problem.  There are now no objc failures
under hpux 10.20.  The patch code is similar to that used for posix
threads.

The file libobjc/thr-dce.c contains a similar set of functions as gthr-dce.h.
The code therein incorrectly passes `&(mutex->backend)'.  I didn't fix
thr-dce.c since it doesn't appear to be used anymore.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-08-31  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* gthr-dce.h (__gthread_objc_mutex_allocate): Create a pthread_mutex_t
	object before calling pthread_mutex_init.

--- gthr-dce.h.orig	Fri Aug  4 13:25:19 2000
+++ gthr-dce.h	Thu Aug 31 14:10:37 2000
@@ -274,10 +274,18 @@
 static inline int
 __gthread_objc_mutex_allocate(objc_mutex_t mutex)
 {
-  if (__gthread_active_p ()
-      && pthread_mutex_init((pthread_mutex_t *)mutex->backend,
+  if (__gthread_active_p ())
+    {
+      mutex->backend = objc_malloc(sizeof(pthread_mutex_t));
+
+      if (pthread_mutex_init((pthread_mutex_t *)mutex->backend,
       			    pthread_mutexattr_default))
-    return -1;
+        {
+          objc_free(mutex->backend);
+          mutex->backend = NULL;
+          return -1;
+        }
+    }
 
   return 0;
 }

Re: Patch: Re: objc FAILs under hpux/-threads with gcc-2.96 CVS 20000816

[Ovidiu Predescu]

Thanks, I applied it!

Regards,
Ovidiu

-- 
Ovidiu Predescu <ovidiu@cup.hp.com>
http://orion.nsr.hp.com/ (inside HP's firewall only)
http://www.geocities.com/SiliconValley/Monitor/7464/

On Fri, 1 Sep 2000 16:29:22 -0400 (EDT), "John David Anglin" 
<dave@hiauly1.hia.nrc.ca> wrote:

> > 		=== objc Summary for unix/-threads ===
> > 
> > # of expected passes		22
> > # of unexpected failures	22
> 
> The enclosed patch corrects the problem.  There are now no objc failures
> under hpux 10.20.  The patch code is similar to that used for posix
> threads.
> 
> The file libobjc/thr-dce.c contains a similar set of functions as gthr-dce.h.
> The code therein incorrectly passes `&(mutex->backend)'.  I didn't fix
> thr-dce.c since it doesn't appear to be used anymore.
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)
> 
> 2000-08-31  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* gthr-dce.h (__gthread_objc_mutex_allocate): Create a pthread_mutex_t
> 	object before calling pthread_mutex_init.
> 
> --- gthr-dce.h.orig	Fri Aug  4 13:25:19 2000
> +++ gthr-dce.h	Thu Aug 31 14:10:37 2000
> @@ -274,10 +274,18 @@
>  static inline int
>  __gthread_objc_mutex_allocate(objc_mutex_t mutex)
>  {
> -  if (__gthread_active_p ()
> -      && pthread_mutex_init((pthread_mutex_t *)mutex->backend,
> +  if (__gthread_active_p ())
> +    {
> +      mutex->backend = objc_malloc(sizeof(pthread_mutex_t));
> +
> +      if (pthread_mutex_init((pthread_mutex_t *)mutex->backend,
>        			    pthread_mutexattr_default))
> -    return -1;
> +        {
> +          objc_free(mutex->backend);
> +          mutex->backend = NULL;
> +          return -1;
> +        }
> +    }
>  
>    return 0;
>  }
> 


-- 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.2 (GNU/Linux)
Comment: Exmh version 2.2 06/23/2000

iD8DBQE5sI5k1cM8Hy0YC5kRAu5RAJ9Xj8+qMBYtjj6CNNVYt0hzmCmuyACfc1rZ
VpfOHd+uUpamKcm0g4ALdeI=
=z0QG
-----END PGP SIGNATURE-----

Another patch: Re: objc FAILs under hpux/-threads with gcc-2.96 CVS

[John David Anglin]

This is the complement to the previous patch.  Tested with bootstrap
and check.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-09-02  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* gthr-dce.h (__gthread_objc_mutex_deallocate): Free mutex->backend.

--- gthr-dce.h.orig	Fri Sep  1 19:17:41 2000
+++ gthr-dce.h	Sat Sep  2 14:37:18 2000
@@ -294,9 +294,14 @@
 static inline int
 __gthread_objc_mutex_deallocate(objc_mutex_t mutex)
 {
-  if (__gthread_active_p ()
-      && pthread_mutex_destroy((pthread_mutex_t *)mutex->backend))
-    return -1;
+  if (__gthread_active_p ())
+    {
+      if (pthread_mutex_destroy((pthread_mutex_t *)mutex->backend))
+        return -1;
+
+      objc_free(mutex->backend);
+      mutex->backend = NULL;
+    }
 
   return 0;
 }

Re: Another patch: Re: objc FAILs under hpux/-threads with gcc-2.96 CVS

[Ovidiu Predescu]

Thanks, I applied it.

Ovidiu

On Tue, 5 Sep 2000 14:21:18 -0400 (EDT), "John David Anglin" 
<dave@hiauly1.hia.nrc.ca> wrote:

> This is the complement to the previous patch.  Tested with bootstrap
> and check.
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)
> 
> 2000-09-02  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* gthr-dce.h (__gthread_objc_mutex_deallocate): Free mutex->backend.
> 
> --- gthr-dce.h.orig	Fri Sep  1 19:17:41 2000
> +++ gthr-dce.h	Sat Sep  2 14:37:18 2000
> @@ -294,9 +294,14 @@
>  static inline int
>  __gthread_objc_mutex_deallocate(objc_mutex_t mutex)
>  {
> -  if (__gthread_active_p ()
> -      && pthread_mutex_destroy((pthread_mutex_t *)mutex->backend))
> -    return -1;
> +  if (__gthread_active_p ())
> +    {
> +      if (pthread_mutex_destroy((pthread_mutex_t *)mutex->backend))
> +        return -1;
> +
> +      objc_free(mutex->backend);
> +      mutex->backend = NULL;
> +    }
>  
>    return 0;
>  }
> 


-- 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.2 (GNU/Linux)
Comment: Exmh version 2.2 06/23/2000

iD8DBQE5tetU1cM8Hy0YC5kRArO+AKCj68G4yhGrbZ1nVyCzY9HZGiiMiACgnE7p
XKeE7VP9Aw8Ny3VpjnX3WFk=
=+soU
-----END PGP SIGNATURE-----

Re: Unsatisfied symbols: cpp_register_pragma (code), cpp_register_pragma_space (code)

[John David Anglin]

> With todays cvs source, the following build error occured under hpux 10.20:
> 
> ../stage1/xgcc -B../stage1/ -B/usr/local/hppa1.1-hp-hpux10.20/bin/  -DIN_GCC    -g -O3 -W -Wall  -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes  -Wno-long-long  -W -Wall  -o ../cc1plus \
>       call.o decl.o errfn.o expr.o pt.o typeck2.o class.o decl2.o error.o lex.o parse.o ptree.o rtti.o spew.o typeck.o cvt.o except.o friend.o init.o method.o search.o semantics.o tree.o xref.o repo.o dump.o optimize.o mangle.o  ../c-common.o ../c-pragma.o ../c-semantics.o ../c-lex.o ../toplev.o ../libbackend.a ../intl/libintl.a ../../libiberty/libiberty.a 
> /usr/ccs/bin/ld: Unsatisfied symbols:
>    cpp_register_pragma (code)
>    cpp_register_pragma_space (code)

Here is an untested patch for review.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-09-08  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	lex.c (init_cp_pragma): Don't call cpp_register_pragma or
	cpp_register_pragma_space if HANDLE_GENERIC_PRAGMAS is not defined.

--- lex.c.orig	Thu Sep  7 12:43:48 2000
+++ lex.c	Fri Sep  8 13:17:57 2000
@@ -681,6 +681,7 @@
 static void
 init_cp_pragma ()
 {
+#ifdef HANDLE_GENERIC_PRAGMAS
 #if USE_CPPLIB
 #define pfile &parse_in
 #else
@@ -697,6 +698,7 @@
   cpp_register_pragma (pfile, "GCC", "interface", handle_pragma_interface);
   cpp_register_pragma (pfile, "GCC", "implementation",
 		       handle_pragma_implementation);
+#endif /* HANDLE_GENERIC_PRAGMAS */
 }
 
 const char *

Re: Unsatisfied symbols: cpp_register_pragma (code), cpp_register_pragma_space (code)

[Zack Weinberg]

On Fri, Sep 08, 2000 at 01:29:13PM -0400, John David Anglin wrote:
...

> 2000-09-08  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	lex.c (init_cp_pragma): Don't call cpp_register_pragma or
> 	cpp_register_pragma_space if HANDLE_GENERIC_PRAGMAS is not defined.

This is not right.  #pragma [GCC] interface and implementation need to
work irrespective of the value of HANDLE_GENERIC_PRAGMAS.  The right
fix is to adjust c-pragma.c so that the registry and dispatch routines
don't depend on HANDLE_GENERIC_PRAGMAS, and c-lex.c so that the
dispatch routine does get called.  I'll try to generate a patch.

zw

Re: Unsatisfied symbols: cpp_register_pragma (code), cpp_register_pragma_space (code)

[John David Anglin]

> > 2000-09-08  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
> > 
> > 	lex.c (init_cp_pragma): Don't call cpp_register_pragma or
> > 	cpp_register_pragma_space if HANDLE_GENERIC_PRAGMAS is not defined.
> 
> This is not right.  #pragma [GCC] interface and implementation need to
> work irrespective of the value of HANDLE_GENERIC_PRAGMAS.  The right
> fix is to adjust c-pragma.c so that the registry and dispatch routines
> don't depend on HANDLE_GENERIC_PRAGMAS, and c-lex.c so that the
> dispatch routine does get called.  I'll try to generate a patch.

Sound like this wan't right either:

2000-09-07  Richard Henderson  <rth@cygnus.com>

        * c-lex.c (process_directive): If not HANDLE_GENERIC_PRAGMAS,
	do not call dispatch_pragma.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Unsatisfied symbols: cpp_register_pragma (code), cpp_register_pragma_space (code)

[Zack Weinberg]

On Fri, Sep 08, 2000 at 01:43:16PM -0400, John David Anglin wrote:
> > > 2000-09-08  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
> > > 
> > > 	lex.c (init_cp_pragma): Don't call cpp_register_pragma or
> > > 	cpp_register_pragma_space if HANDLE_GENERIC_PRAGMAS is not defined.
> > 
> > This is not right.  #pragma [GCC] interface and implementation need to
> > work irrespective of the value of HANDLE_GENERIC_PRAGMAS.  The right
> > fix is to adjust c-pragma.c so that the registry and dispatch routines
> > don't depend on HANDLE_GENERIC_PRAGMAS, and c-lex.c so that the
> > dispatch routine does get called.  I'll try to generate a patch.
> 
> Sound like this wan't right either:
> 
> 2000-09-07  Richard Henderson  <rth@cygnus.com>
> 
>         * c-lex.c (process_directive): If not HANDLE_GENERIC_PRAGMAS,
> 	do not call dispatch_pragma.

No, it isn't.  I believe the following is the correct patch; I can
build a cross-compiler to hpux10 with it.  Please give it a spin.

zw

	* c-pragma.c: Don't elide entire file if !HANDLE_GENERIC_PRAGMAS.
	* c-pragma.h: Don't define HANDLE_GENERIC_PRAGMAS.  Always
	prototype init_pragma, prototype dispatch_pragma if !USE_CPPLIB,
	never define init_pragma to nothing.
	* c-lex.c (process_directive): Revert previous change - always
	call dispatch_pragma.

===================================================================
Index: c-pragma.c
--- c-pragma.c	2000/09/07 22:24:31	1.35
+++ c-pragma.c	2000/09/08 17:59:14
@@ -32,8 +32,6 @@ Boston, MA 02111-1307, USA.  */
 #include "c-lex.h"
 #include "tm_p.h"
 
-#ifdef HANDLE_GENERIC_PRAGMAS
-
 #if USE_CPPLIB
 extern cpp_reader parse_in;
 #else
@@ -438,10 +436,11 @@ dispatch_pragma ()
 void
 init_pragma ()
 {
+  cpp_reader *pfile ATTRIBUTE_UNUSED;
 #if !USE_CPPLIB
-  cpp_reader *pfile = 0;
+  pfile = 0;
 #else
-  cpp_reader *pfile = &parse_in;
+  pfile = &parse_in;
 #endif
 
 #ifdef HANDLE_PRAGMA_PACK
@@ -450,7 +449,6 @@ init_pragma ()
 #ifdef HANDLE_PRAGMA_WEAK
   cpp_register_pragma (pfile, 0, "weak", handle_pragma_weak);
 #endif
-
 #ifdef REGISTER_TARGET_PRAGMAS
   REGISTER_TARGET_PRAGMAS (pfile);
 #endif
@@ -460,5 +458,3 @@ init_pragma ()
 		mark_align_stack);
 #endif
 }
-
-#endif /* HANDLE_GENERIC_PRAGMAS */
===================================================================
Index: c-pragma.h
--- c-pragma.h	2000/09/07 22:24:31	1.16
+++ c-pragma.h	2000/09/08 17:59:14
@@ -57,25 +57,11 @@ extern struct weak_syms * weak_decls;
 extern int add_weak PARAMS ((const char *, const char *));
 #endif /* HANDLE_PRAGMA_WEAK */
 
-
-/* Define HANDLE_GENERIC_PRAGMAS if any kind of front-end pragma
-   parsing is to be done.  The code in GCC's generic C source files
-   will only look for the definition of this constant.  They will
-   ignore definitions of HANDLE_PRAGMA_PACK and so on.  */
-#if defined HANDLE_PRAGMA_PACK || defined HANDLE_PRAGMA_WEAK \
-    || defined REGISTER_TARGET_PRAGMAS
-#define HANDLE_GENERIC_PRAGMAS
-#endif
-
-#ifdef HANDLE_GENERIC_PRAGMAS
 extern void init_pragma PARAMS ((void));
 
-# if !USE_CPPLIB
+/* If cpplib is in use, it handles dispatch.  */
+#if !USE_CPPLIB
 extern void dispatch_pragma PARAMS ((void));
-# endif
-
-#else
-# define init_pragma()
 #endif
 
 /* Duplicate prototypes for the register_pragma stuff and the typedef for
===================================================================
Index: c-lex.c
--- c-lex.c	2000/09/08 01:38:08	1.99
+++ c-lex.c	2000/09/08 17:59:14
@@ -457,9 +457,7 @@ process_directive ()
 
       if (!strcmp (name, "pragma"))
 	{
-#ifdef HANDLE_GENERIC_PRAGMAS
 	  dispatch_pragma ();
-#endif
 	  goto skipline;
 	}
       else if (!strcmp (name, "define"))

Re: Segmentation fault building libg++ without named returns

[John David Anglin]

The enclosed patch works around the previous problem.  However, the are still
problems which appear unrelated to this patch.

The tFix test fails.  Not sure what is going on here but for most of the
other classes there seems to be weak definitions for the class constructors,
etc.  Here is the log:

spawn /home/dave/gnu/gcc-2.96/objdir/gcc/xgcc -B/home/dave/gnu/gcc-2.96/objdir/gcc/ ../../../../libg++/testsuite/libg++.tests/../../tests/tFix.cc libtest.a -L/home/dave/gnu/gcc-2.96/objdir/i686-pc-linux-gnu//libg++ -I.. -I../../../../libg++ -I. -I/home/dave/gnu/gcc-2.96/libg++ -I/home/dave/gnu/gcc-2.96/libg++/src -I/home/dave/gnu/gcc-2.96/libstdc++ -I/home/dave/gnu/gcc-2.96/libstdc++/stl -I/home/dave/gnu/gcc-2.96/libio -I/home/dave/gnu/gcc-2.96/objdir/i686-pc-linux-gnu/libio -L/home/dave/gnu/gcc-2.96/objdir/i686-pc-linux-gnu//libg++ -L/home/dave/gnu/gcc-2.96/objdir/i686-pc-linux-gnu//libstdc++ -L/home/dave/gnu/gcc-2.96/objdir/i686-pc-linux-gnu//libiberty -L/home/dave/gnu/gcc-2.96/objdir/i686-pc-linux-gnu/libio -lg++ -lstdc++ -lm -o /home/dave/gnu/gcc-2.96/objdir/i686-pc-linux-gnu/libg++/testsuite/tFix 
/tmp/ccPgMFw1.o: In function `check(char const *, Fix)':
/tmp/ccPgMFw1.o(.text+0x3e): undefined reference to `operator<<(ostream &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x59): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0x6b): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o: In function `checkb(char const *, Fix)':
/tmp/ccPgMFw1.o(.text+0x1f0): undefined reference to `length(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x232): undefined reference to `operator<<(ostream &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x26e): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0x280): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o: In function `main':
/tmp/ccPgMFw1.o(.text+0x2f8): undefined reference to `Fix::Fix(void)'
/tmp/ccPgMFw1.o(.text+0x30b): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x335): undefined reference to `Fix::Fix(double)'
/tmp/ccPgMFw1.o(.text+0x348): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x371): undefined reference to `Fix::Fix(int, double)'
/tmp/ccPgMFw1.o(.text+0x384): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x3b0): undefined reference to `Fix::Fix(int, double)'
/tmp/ccPgMFw1.o(.text+0x3c3): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x3ea): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x3fd): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x42b): undefined reference to `Fix::operator=(double)'
/tmp/ccPgMFw1.o(.text+0x456): undefined reference to `Fix::operator=(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x481): undefined reference to `Fix::operator=(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x4ac): undefined reference to `Fix::operator=(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x4da): undefined reference to `Fix::operator=(double)'
/tmp/ccPgMFw1.o(.text+0x501): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x528): undefined reference to `operator==(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x550): undefined reference to `Fix::operator=(double)'
/tmp/ccPgMFw1.o(.text+0x561): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0x574): undefined reference to `operator==(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x595): undefined reference to `operator!=(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x5b6): undefined reference to `operator>(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x5d7): undefined reference to `operator<=(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x5fc): undefined reference to `Fix::operator=(double)'
/tmp/ccPgMFw1.o(.text+0x60d): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0x68f): undefined reference to `Fix::operator+(void)'
/tmp/ccPgMFw1.o(.text+0x69c): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x6c3): undefined reference to `Fix::operator-(void)'
/tmp/ccPgMFw1.o(.text+0x6ee): undefined reference to `operator+(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x719): undefined reference to `operator-(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x744): undefined reference to `operator*(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x76d): undefined reference to `operator*(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0x796): undefined reference to `operator*(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0x7c8): undefined reference to `Fix::operator-(void)'
/tmp/ccPgMFw1.o(.text+0x7da): undefined reference to `operator*(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0x7ff): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0x81d): undefined reference to `Fix::operator-(void)'
/tmp/ccPgMFw1.o(.text+0x82f): undefined reference to `operator*(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0x854): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0x869): undefined reference to `operator*(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0x892): undefined reference to `operator%(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0x8bb): undefined reference to `operator%(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0x8e6): undefined reference to `operator/(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0x90f): undefined reference to `operator<<(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0x941): undefined reference to `Fix::operator-(void)'
/tmp/ccPgMFw1.o(.text+0x953): undefined reference to `operator>>(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0x978): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0x994): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0x9a9): undefined reference to `abs(Fix)'
/tmp/ccPgMFw1.o(.text+0x9d9): undefined reference to `Fix::operator-(void)'
/tmp/ccPgMFw1.o(.text+0x9ee): undefined reference to `abs(Fix)'
/tmp/ccPgMFw1.o(.text+0xa14): undefined reference to `sgn(Fix const &)'
/tmp/ccPgMFw1.o(.text+0xa3b): undefined reference to `Fix::operator-(void)'
/tmp/ccPgMFw1.o(.text+0xa47): undefined reference to `sgn(Fix const &)'
/tmp/ccPgMFw1.o(.text+0xa66): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0xaa3): undefined reference to `Fix::Fix(double)'
/tmp/ccPgMFw1.o(.text+0xad1): undefined reference to `Fix::Fix(double)'
/tmp/ccPgMFw1.o(.text+0xae7): undefined reference to `Fix::Fix(Fix const &)'
/tmp/ccPgMFw1.o(.text+0xb18): undefined reference to `operator/(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0xb51): undefined reference to `Fix::Fix(double)'
/tmp/ccPgMFw1.o(.text+0xb6a): undefined reference to `operator/(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0xb95): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0xbb0): undefined reference to `operator*(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0xc06): undefined reference to `operator+(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0xc43): undefined reference to `Fix::operator-(void)'
/tmp/ccPgMFw1.o(.text+0xc58): undefined reference to `operator-(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0xc83): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0xc9b): undefined reference to `operator*(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0xcf1): undefined reference to `operator+(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0xd2e): undefined reference to `Fix::operator-(void)'
/tmp/ccPgMFw1.o(.text+0xd43): undefined reference to `operator-(Fix const &, Fix const &)'
/tmp/ccPgMFw1.o(.text+0xd6e): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0xd86): undefined reference to `operator*(Fix const &, int)'
/tmp/ccPgMFw1.o(.text+0xdae): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0xdbf): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0xdd0): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0xde1): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0xdf2): undefined reference to `Fix::~Fix(void)'
/tmp/ccPgMFw1.o(.text+0xe03): more undefined references to `Fix::~Fix(void)' follow
collect2: ld returned 1 exit status
compiler exited with status 1
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-09-08  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* BitSet.cc, BitString.cc, BitString.h, Integer.cc, Integer.h,
	Rational.cc, Rational.h, String.cc, String.h: Don't use named returns.

--- libg++-2.8.1.3-20000816/libg++/src/BitSet.cc	Thu Dec 17 09:34:11 1998
+++ libg++-2.8.1.3-20000908/libg++/src/BitSet.cc	Fri Sep  8 16:17:10 2000
@@ -924,62 +924,6 @@
   return r;
 }
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-
-BitSet atoBitSet(const char* s, char f, char t, char star) return r
-{
-  unsigned int sl = strlen(s);
-  if (sl != 0)
-  {
-    r.rep = BitSetresize(r.rep, sl / BITSETBITS + 1);
-    _BS_word* rs = r.rep->s;
-    _BS_word a = 0;
-    _BS_word m = 1;
-    char lastch = 0;
-    unsigned int i = 0;
-    unsigned int l = 1;
-    for(;;)
-    {
-      char ch = s[i];
-      if (ch == t)
-        a |= m;
-      else if (ch == star)
-      {
-        if ((r.rep->virt = (lastch == t)))
-          *rs = a | ~(m - 1);
-        else
-          *rs = a;
-        break;
-      }
-      else if (ch != f)
-      {
-        *rs = a;
-        break;
-      }
-      lastch = ch;
-      if (++i == sl)
-      {
-        *rs = a;
-        break;
-      }
-      else if (i % BITSETBITS == 0)
-      {
-        *rs++ = a;
-        a = 0;
-        m = 1;
-        ++l;
-      }
-      else
-        m <<= 1;
-    }
-    r.rep->len = l;
-    trim(r.rep);
-  }
-  return;
-}
-
-#else
-
 BitSet atoBitSet(const char* s, char f, char t, char star) 
 {
   BitSet r;
@@ -1033,8 +977,6 @@
   return r;
 }
 
-#endif
-
 ostream& operator << (ostream& s, const BitSet& x)
 {
   if (s.opfx())
--- libg++-2.8.1.3-20000816/libg++/src/BitString.cc	Thu May 25 00:31:32 2000
+++ libg++-2.8.1.3-20000908/libg++/src/BitString.cc	Fri Sep  8 16:30:11 2000
@@ -1258,23 +1258,10 @@
   return _substr(first, rep->len - first);
 }
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-#define RETURN(r) return
-#define RETURNS(r) return r;
-#define RETURN_OBJECT(TYPE, NAME) /* nothing */
-#define USE_UNSIGNED 1 /* probably correct */
-#else /* _G_NO_NRV */
-#define RETURN(r) return r
-#define RETURNS(r) /* nothing */
-#define RETURN_OBJECT(TYPE, NAME) TYPE NAME;
-#define USE_UNSIGNED 0 /* probably old bug */
-#endif
-
 BitString
 common_prefix (const BitString& x, const BitString& y, _G_int32_t startpos)
-     RETURNS(r)
 {
-  RETURN_OBJECT(BitString, r);
+  BitString r;
   _G_uint32_t  xl = x.rep->len;
   _G_uint32_t  yl = y.rep->len;
 
@@ -1288,7 +1275,7 @@
     startx = starty = startpos;
 
   if (startx >= xl || starty >= yl)
-    RETURN(r);
+    return r;
 
   const _BS_word* xs = &(x.rep->s[BitStr_index(startx)]);
   _BS_word a = *xs++;
@@ -1310,15 +1297,14 @@
       b = *ys++;
   }
   r.rep = BStr_alloc(0, x.rep->s, startx, xp, xp - startx);
-  RETURN(r);
+  return r;
 }
 
 
 BitString
 common_suffix (const BitString& x, const BitString& y, _G_int32_t startpos)
-     RETURNS(r)
 {
-  RETURN_OBJECT(BitString, r);
+  BitString r;
   _G_uint32_t  xl = x.rep->len;
   _G_uint32_t  yl = y.rep->len;
 
@@ -1332,7 +1318,7 @@
     startx = starty = startpos;
 
   if (startx >= xl || starty >= yl)
-    RETURN(r);
+    return r;
 
   const _BS_word* xs = &(x.rep->s[BitStr_index(startx)]);
   _BS_word a = *xs--;
@@ -1354,13 +1340,12 @@
       b = *ys--;
   }
   r.rep = BStr_alloc(0, x.rep->s, xp+1, startx+1, startx - xp);
-  RETURN(r);
+  return r;
 }
 
 BitString reverse (const BitString& x)
-     RETURNS(r)
 {
-  RETURN_OBJECT(BitString, r);
+  BitString r;
   _G_uint32_t yl = x.rep->len;
   BitStrRep* y = BStr_resize(0, yl);
   if (yl > 0)
@@ -1390,14 +1375,13 @@
     }
   }
   r.rep = y;
-  RETURN(r);
+  return r;
 }
 
 BitString
 atoBitString (const char* s, char f, char t)
-     RETURNS(res)
 {
-  RETURN_OBJECT(BitString, res);
+  BitString res;
   _G_uint32_t sl = strlen(s);
   BitStrRep* r = BStr_resize(0, sl);
   if (sl != 0)
@@ -1435,14 +1419,13 @@
     r = BStr_resize(r, rl);
   }
   res.rep = r;
-  RETURN(res);
+  return res;
 }
 
 BitPattern
 atoBitPattern (const char* s, char f,char t,char x)
-     RETURNS(r)
 {
-  RETURN_OBJECT(BitPattern, r);
+  BitPattern r;
   _G_uint32_t sl = strlen(s);
   if (sl != 0)
   {
@@ -1494,7 +1477,7 @@
     r.pattern.rep = BStr_resize(r.pattern.rep, rl);
     r.mask.rep = BStr_resize(r.mask.rep, rl);
   }
-  RETURN(r);
+  return r;
 }
 
 extern AllocRing _libgxx_fmtq;
--- libg++-2.8.1.3-20000816/libg++/src/Integer.cc	Thu May 25 00:31:32 2000
+++ libg++-2.8.1.3-20000908/libg++/src/Integer.cc	Fri Sep  8 16:32:53 2000
@@ -1907,41 +1907,6 @@
   return dest;
 }
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-
-Integer sqrt(const Integer& x) return r(x)
-{
-  int s = sign(x);
-  if (s < 0) x.error("Attempted square root of negative Integer");
-  if (s != 0)
-  {
-    r >>= (lg(x) / 2); // get close
-    Integer q;
-    div(x, r, q);
-    while (q < r)
-    {
-      r += q;
-      r >>= 1;
-      div(x, r, q);
-    }
-  }
-  return;
-}
-
-Integer lcm(const Integer& x, const Integer& y) return r
-{
-  if (!x.initialized() || !y.initialized())
-    x.error("operation on uninitialized Integer");
-  Integer g;
-  if (sign(x) == 0 || sign(y) == 0)
-    g = 1;
-  else 
-    g = gcd(x, y);
-  div(x, g, r);
-  mul(r, y, r);
-}
-
-#else 
 Integer sqrt(const Integer& x) 
 {
   Integer r(x);
@@ -1977,10 +1942,6 @@
   return r;
 }
 
-#endif
-
-
-
 IntRep* atoIntRep(const char* s, int base)
 {
   int sl = strlen(s);
--- libg++-2.8.1.3-20000816/libg++/src/Rational.cc	Sat Jun 24 12:45:36 1995
+++ libg++-2.8.1.3-20000908/libg++/src/Rational.cc	Fri Sep  8 16:35:23 2000
@@ -193,78 +193,6 @@
   return pow(x, yy);
 }               
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-
-Rational operator - (const Rational& x) return r(x)
-{
-  r.negate();
-}
-
-Rational abs(const Rational& x) return r(x)
-{
-  if (sign(r.num) < 0) r.negate();
-}
-
-
-Rational sqr(const Rational& x) return r
-{
-  mul(x.num, x.num, r.num);
-  mul(x.den, x.den, r.den);
-  r.normalize();
-}
-
-Integer floor(const Rational& x) return q
-{
-  Integer r;
-  divide(x.num, x.den, q, r);
-  if (sign(x.num) < 0 && sign(r) != 0) --q;
-}
-
-Integer ceil(const Rational& x) return q
-{
-  Integer  r;
-  divide(x.num, x.den, q, r);
-  if (sign(x.num) >= 0 && sign(r) != 0) ++q;
-}
-
-Integer round(const Rational& x) return q
-{
-  Integer r;
-  divide(x.num, x.den, q, r);
-  r <<= 1;
-  if (ucompare(r, x.den) >= 0)
-  {
-    if (sign(x.num) >= 0)
-      ++q;
-    else
-      --q;
-  }
-}
-
-// power: no need to normalize since num & den already relatively prime
-
-Rational pow(const Rational& x, long y) return r
-{
-  if (y >= 0)
-  {
-    pow(x.num, y, r.num);
-    pow(x.den, y, r.den);
-  }
-  else
-  {
-    y = -y;
-    pow(x.num, y, r.den);
-    pow(x.den, y, r.num);
-    if (sign(r.den) < 0)
-    {
-      r.num.negate();
-      r.den.negate();
-    }
-  }
-}
-
-#else
-
 Rational operator - (const Rational& x) 
 {
   Rational r(x); r.negate(); return r;
@@ -343,8 +271,6 @@
   return r;
 }
 
-#endif
-
 ostream& operator << (ostream& s, const Rational& y)
 {
   if (y.denominator() == 1L)
--- libg++-2.8.1.3-20000816/libg++/src/Rational.h	Sat Jun 24 12:45:37 1995
+++ libg++-2.8.1.3-20000908/libg++/src/Rational.h	Fri Sep  8 16:11:56 2000
@@ -242,30 +242,6 @@
 }
 #endif
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-
-inline Rational operator + (const Rational& x, const Rational& y) return r
-{
-  add(x, y, r);
-}
-
-inline Rational operator - (const Rational& x, const Rational& y) return r
-{
-  sub(x, y, r);
-}
-
-inline Rational operator * (const Rational& x, const Rational& y) return r
-{
-  mul(x, y, r);
-}
-
-inline Rational operator / (const Rational& x, const Rational& y) return r
-{
-  div(x, y, r);
-}
-
-#else /* NO_NRV */
-
 inline Rational operator + (const Rational& x, const Rational& y) 
 {
   Rational r; add(x, y, r); return r;
@@ -285,6 +261,5 @@
 {
   Rational r; div(x, y, r); return r;
 }
-#endif
 
 #endif
--- libg++-2.8.1.3-20000816/libg++/src/String.cc	Thu Dec 17 09:34:11 1998
+++ libg++-2.8.1.3-20000908/libg++/src/String.cc	Fri Sep  8 16:38:56 2000
@@ -966,19 +966,9 @@
 }
 
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-#define RETURN(r) return
-#define RETURNS(r) return r;
-#define RETURN_OBJECT(TYPE, NAME) /* nothing */
-#else /* _G_NO_NRV */
-#define RETURN(r) return r
-#define RETURNS(r) /* nothing */
-#define RETURN_OBJECT(TYPE, NAME) TYPE NAME;
-#endif
-
-String join(String src[], int n, const String& separator) RETURNS(x)
+String join(String src[], int n, const String& separator)
 {
-  RETURN_OBJECT(String,x)
+  String x;
   String sep = separator;
   int xlen = 0;
   int i;
@@ -998,7 +988,7 @@
     j += sep.length();
   }
   ncopy0(src[i].chars(), &(x.rep->s[j]), src[i].length());
-  RETURN(x);
+  return x;
 }
   
 /*
@@ -1078,58 +1068,6 @@
   return dest;
 }
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-
-String replicate(char c, int n) return w;
-{
-  w.rep = Sresize(w.rep, n);
-  char* p = w.rep->s;
-  while (n-- > 0) *p++ = c;
-  *p = 0;
-}
-
-String replicate(const String& y, int n) return w
-{
-  int len = y.length();
-  w.rep = Sresize(w.rep, n * len);
-  char* p = w.rep->s;
-  while (n-- > 0)
-  {
-    ncopy(y.chars(), p, len);
-    p += len;
-  }
-  *p = 0;
-}
-
-String common_prefix(const String& x, const String& y, int startpos) return r;
-{
-  const char* xchars = x.chars();
-  const char* ychars = y.chars();
-  const char* xs = &(xchars[startpos]);
-  const char* ss = xs;
-  const char* topx = &(xchars[x.length()]);
-  const char* ys = &(ychars[startpos]);
-  const char* topy = &(ychars[y.length()]);
-  int l;
-  for (l = 0; xs < topx && ys < topy && *xs++ == *ys++; ++l);
-  r.rep = Salloc(r.rep, ss, l, l);
-}
-
-String common_suffix(const String& x, const String& y, int startpos) return r;
-{
-  const char* xchars = x.chars();
-  const char* ychars = y.chars();
-  const char* xs = &(xchars[x.length() + startpos]);
-  const char* botx = xchars;
-  const char* ys = &(ychars[y.length() + startpos]);
-  const char* boty = ychars;
-  int l;
-  for (l = 0; xs >= botx && ys >= boty && *xs == *ys ; --xs, --ys, ++l);
-  r.rep = Salloc(r.rep, ++xs, l, l);
-}
-
-#else
-
 String replicate(char c, int n)
 {
   String w;
@@ -1186,8 +1124,6 @@
   return r;
 }
 
-#endif
-
 // IO
 
 istream& operator>>(istream& s, String& x)
--- libg++-2.8.1.3-20000816/libg++/src/String.h	Sat Jun 24 12:45:38 1995
+++ libg++-2.8.1.3-20000908/libg++/src/String.h	Fri Sep  8 16:15:43 2000
@@ -696,80 +696,6 @@
 
 // constructive concatenation
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-
-inline String operator + (const String& x, const String& y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String operator + (const String& x, const SubString& y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String operator + (const String& x, const char* y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String operator + (const String& x, char y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String operator + (const SubString& x, const String& y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String operator + (const SubString& x, const SubString& y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String operator + (const SubString& x, const char* y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String operator + (const SubString& x, char y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String operator + (const char* x, const String& y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String operator + (const char* x, const SubString& y) return r;
-{
-  cat(x, y, r);
-}
-
-inline String reverse(const String& x) return r;
-{
-  r.rep = Sreverse(x.rep, r.rep);
-}
-
-inline String upcase(const String& x) return r;
-{
-  r.rep = Supcase(x.rep, r.rep);
-}
-
-inline String downcase(const String& x) return r;
-{
-  r.rep = Sdowncase(x.rep, r.rep);
-}
-
-inline String capitalize(const String& x) return r;
-{
-  r.rep = Scapitalize(x.rep, r.rep);
-}
-
-#else /* NO_NRV */
-
 inline String operator + (const String& x, const String& y)
 {
   String r;  cat(x, y, r);  return r;
@@ -840,8 +766,6 @@
   String r; r.rep = Scapitalize(x.rep, r.rep); return r;
 }
 
-#endif
-
 // prepend
 
 inline void String::prepend(const String& y)
--- libg++-2.8.1.3-20000816/libg++/src/BitString.h	Thu May 25 00:31:32 2000
+++ libg++-2.8.1.3-20000908/libg++/src/BitString.h	Fri Sep  8 18:26:14 2000
@@ -499,68 +499,19 @@
   ::complement(*this, *this);
 }
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-
-inline BitString  operator & (const BitString& x, const BitString& y) return r
-{
-  and_f(x, y, r);
-}
-
-inline BitString  operator | (const BitString& x, const BitString& y) return r
-{
-  or_f(x, y, r);
-}
-
-inline BitString  operator ^ (const BitString& x, const BitString& y) return r
-{
-  xor_f(x, y, r);
-}
-
-inline BitString  operator << (const BitString& x, _G_int32_t y) return r
-{
-  lshift(x, y, r);
-}
-
-inline BitString  operator >> (const BitString& x, _G_int32_t y) return r
-{
-  rshift(x, y, r);
-}
-
-inline BitString  operator - (const BitString& x, const BitString& y) return r
-{
-  diff(x, y, r);
-}
-
-inline BitString  operator + (const BitString& x, const BitString& y) return r
-{
-  cat(x, y, r);
-}
-
-inline BitString  operator + (const BitString& x, _G_uint32_t y) return r
-{
-  cat(x, y, r);
-}
-
-inline BitString  operator ~ (const BitString& x) return r
-{
-  complement(x, r);
-}
-
-#else /* NO_NRV */
-
 inline BitString  operator & (const BitString& x, const BitString& y) 
 {
-  BitString r; and(x, y, r); return r;
+  BitString r; and_f(x, y, r); return r;
 }
 
 inline BitString  operator | (const BitString& x, const BitString& y) 
 {
-  BitString r; or(x, y, r); return r;
+  BitString r; or_f(x, y, r); return r;
 }
 
 inline BitString  operator ^ (const BitString& x, const BitString& y) 
 {
-  BitString r; xor(x, y, r); return r;
+  BitString r; xor_f(x, y, r); return r;
 }
 
 inline BitString  operator << (const BitString& x, _G_int32_t y) 
@@ -593,8 +544,6 @@
   BitString r; complement(x, r); return r;
 }
 
-#endif
-
 // status, matching
 
 inline _G_int32_t BitString::length() const
--- libg++-2.8.1.3-20000816/libg++/src/Integer.h	Thu May 25 00:31:32 2000
+++ libg++-2.8.1.3-20000908/libg++/src/Integer.h	Fri Sep  8 18:18:53 2000
@@ -761,187 +761,6 @@
 
 // constructive operations 
 
-#if defined(__GNUG__) && !defined(_G_NO_NRV)
-
-inline Integer  operator +  (const Integer& x, const Integer& y) return r
-{
-  add(x, y, r);
-}
-
-inline Integer  operator +  (const Integer& x, long y) return r
-{
-  add(x, y, r);
-}
-
-inline Integer  operator +  (long  x, const Integer& y) return r
-{
-  add(x, y, r);
-}
-
-inline Integer  operator -  (const Integer& x, const Integer& y) return r
-{
-  sub(x, y, r);
-}
-
-inline Integer  operator -  (const Integer& x, long y) return r
-{
-  sub(x, y, r);
-}
-
-inline Integer  operator -  (long  x, const Integer& y) return r
-{
-  sub(x, y, r);
-}
-
-inline Integer  operator *  (const Integer& x, const Integer& y) return r
-{
-  mul(x, y, r);
-}
-
-inline Integer  operator *  (const Integer& x, long y) return r
-{
-  mul(x, y, r);
-}
-
-inline Integer  operator *  (long  x, const Integer& y) return r
-{
-  mul(x, y, r);
-}
-
-inline Integer sqr(const Integer& x) return r
-{
-  mul(x, x, r);
-}
-
-inline Integer  operator &  (const Integer& x, const Integer& y) return r
-{
-  r.rep = bitop(x.rep, y.rep, r.rep, '&');
-}
-
-inline Integer  operator &  (const Integer& x, long y) return r
-{
-  r.rep = bitop(x.rep, y, r.rep, '&');
-}
-
-inline Integer  operator &  (long  x, const Integer& y) return r
-{
-  r.rep = bitop(y.rep, x, r.rep, '&');
-}
-
-inline Integer  operator |  (const Integer& x, const Integer& y) return r
-{
-  r.rep = bitop(x.rep, y.rep, r.rep, '|');
-}
-
-inline Integer  operator |  (const Integer& x, long y) return r
-{
-  r.rep = bitop(x.rep, y, r.rep, '|');
-}
-
-inline Integer  operator |  (long  x, const Integer& y) return r
-{
-  r.rep = bitop(y.rep, x, r.rep, '|');
-}
-
-inline Integer  operator ^  (const Integer& x, const Integer& y) return r
-{
-  r.rep = bitop(x.rep, y.rep, r.rep, '^');
-}
-
-inline Integer  operator ^  (const Integer& x, long y) return r
-{
-  r.rep = bitop (x.rep, y, r.rep, '^');
-}
-
-inline Integer  operator ^  (long  x, const Integer& y) return r
-{
-  r.rep = bitop (y.rep, x, r.rep, '^');
-}
-
-inline Integer  operator /  (const Integer& x, const Integer& y) return r
-{
-  div(x, y, r);
-}
-
-inline Integer operator /  (const Integer& x, long y) return r
-{
-  div(x, y, r);
-}
-
-inline Integer operator %  (const Integer& x, const Integer& y) return r
-{
-  mod(x, y, r);
-}
-
-inline Integer operator %  (const Integer& x, long y) return r
-{
-  mod(x, y, r);
-}
-
-inline Integer operator <<  (const Integer& x, const Integer& y) return r
-{
-  lshift(x, y, r);
-}
-
-inline Integer operator <<  (const Integer& x, long y) return r
-{
-  lshift(x, y, r);
-}
-
-inline Integer operator >>  (const Integer& x, const Integer& y) return r;
-{
-  rshift(x, y, r);
-}
-
-inline Integer operator >>  (const Integer& x, long y) return r
-{
-  rshift(x, y, r);
-}
-
-inline Integer pow(const Integer& x, long y) return r
-{
-  pow(x, y, r);
-}
-
-inline Integer Ipow(long x, long y) return r(x)
-{
-  pow(r, y, r);
-}
-
-inline Integer pow(const Integer& x, const Integer& y) return r
-{
-  pow(x, y, r);
-}
-
-
-
-inline Integer abs(const Integer& x) return r
-{
-  abs(x, r);
-}
-
-inline Integer operator - (const Integer& x) return r
-{
-  negate(x, r);
-}
-
-inline Integer operator ~ (const Integer& x) return r
-{
-  complement(x, r);
-}
-
-inline Integer  atoI(const char* s, int base) return r
-{
-  r.rep = atoIntRep(s, base);
-}
-
-inline Integer  gcd(const Integer& x, const Integer& y) return r
-{
-  r.rep = gcd(x.rep, y.rep);
-}
-
-#else /* NO_NRV */
-
 inline Integer  operator +  (const Integer& x, const Integer& y) 
 {
   Integer r; add(x, y, r); return r;
@@ -994,32 +813,32 @@
 
 inline Integer  operator &  (const Integer& x, const Integer& y) 
 {
-  Integer r; and(x, y, r); return r;
+  Integer r; r.rep = bitop(x.rep, y.rep, r.rep, '&'); return r;
 }
 
 inline Integer  operator &  (const Integer& x, long y) 
 {
-  Integer r; and(x, y, r); return r;
+  Integer r; r.rep = bitop(x.rep, y, r.rep, '&'); return r;
 }
 
 inline Integer  operator &  (long  x, const Integer& y) 
 {
-  Integer r; and(x, y, r); return r;
+  Integer r; r.rep = bitop(y.rep, x, r.rep, '&'); return r;
 }
 
 inline Integer  operator |  (const Integer& x, const Integer& y) 
 {
-  Integer r; or(x, y, r); return r;
+  Integer r; r.rep = bitop(x.rep, y.rep, r.rep, '|'); return r;
 }
 
 inline Integer  operator |  (const Integer& x, long y) 
 {
-  Integer r; or(x, y, r); return r;
+  Integer r; r.rep = bitop(x.rep, y, r.rep, '|'); return r;
 }
 
 inline Integer  operator |  (long  x, const Integer& y) 
 {
-  Integer r; or(x, y, r); return r;
+  Integer r; r.rep = bitop(y.rep, x, r.rep, '|'); return r;
 }
 
 inline Integer  operator ^  (const Integer& x, const Integer& y) 
@@ -1119,8 +938,6 @@
   Integer r; r.rep = gcd(x.rep, y.rep); return r;
 }
 
-#endif  /* NO_NRV */
-
 inline Integer& Integer::operator %= (const Integer& y)
 {
   *this = *this % y; // mod(*this, y, *this) doesn't work.

Re: Segmentation fault building libg++ without named returns

[John David Anglin]

> The tFix test fails.  Not sure what is going on here but for most of the
> other classes there seems to be weak definitions for the class constructors,
> etc.  Here is the log:

The failure doesn't occur under hpux 10.20 (only i686 linux).  As noted
before, there aren't any weak symbol defines in Fix.o when built under
i686 linux.  For example,

hpux:
         U strstreambuf::~strstreambuf(void)
00000000 W Fix::~Fix(void)
4000000c D Fix::Rep_0
40000014 D Fix::Rep_m1

linux:
         U strstreambuf::~strstreambuf(void)
0000000c D Fix::Rep_0
00000014 D Fix::Rep_m1

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Segmentation fault building libg++ without named returns

[Manfred Hollstein]

[-- Attachment #1: Type: text/plain, Size: 1564 bytes --]

Hi John,

Thanks for the patch you sent with your previous email; I observed the
same failures when Mark installed his patch to  warn about using named
return values.  I took a differend approach  than you, i.e. instead of
removing  the code completely, I used  the opposite logic  with a flag
_G_USE_NRV  as  opposed to the  former   _G_NO_NRV; I've attached that
patch to this email.

Regarding the missing   weak symbols,  I'm pretty   much  at a   loss;
building Fix.cc and  Rational.cc  doesn't generate all  required  weak
symbols as  it  did  before; even worse,   using  a reduced test  case
doesn't fail to  generate those symbols...  I'll dig  further and keep
you informed.

Cheers.

l8er
manfred

On Saturday, 9 September 2000, 02:06:54 -0400, dave@hiauly1.hia.nrc.ca wrote:

> > The tFix test fails.  Not sure what is going on here but for most of the
> > other classes there seems to be weak definitions for the class constructors,
> > etc.  Here is the log:
> 
> The failure doesn't occur under hpux 10.20 (only i686 linux).  As noted
> before, there aren't any weak symbol defines in Fix.o when built under
> i686 linux.  For example,
> 
> hpux:
>          U strstreambuf::~strstreambuf(void)
> 00000000 W Fix::~Fix(void)
> 4000000c D Fix::Rep_0
> 40000014 D Fix::Rep_m1
> 
> linux:
>          U strstreambuf::~strstreambuf(void)
> 0000000c D Fix::Rep_0
> 00000014 D Fix::Rep_m1
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)


[-- Attachment #2: libg++-2.8.1.3-20000907.diff.gz --]
[-- Type: application/x-gzip, Size: 2914 bytes --]

Re: Segmentation fault building libg++ without named returns

[John David Anglin]

> Thanks for the patch you sent with your previous email; I observed the
> same failures when Mark installed his patch to  warn about using named
> return values.  I took a differend approach  than you, i.e. instead of
> removing  the code completely, I used  the opposite logic  with a flag
> _G_USE_NRV  as  opposed to the  former   _G_NO_NRV; I've attached that
> patch to this email.

I tend to think the code should be removed.  There were essentially two
sets with the "same" code.  However, the unused branch which didn't use
named returns had rotted a bit.  Apparently, `and', `or' and `xor' are
c++ diagraphs and can't be used.

> Regarding the missing   weak symbols,  I'm pretty   much  at a   loss;
> building Fix.cc and  Rational.cc  doesn't generate all  required  weak
> symbols as  it  did  before; even worse,   using  a reduced test  case
> doesn't fail to  generate those symbols...  I'll dig  further and keep
> you informed.

I don't have any time this weekend to work on it but I think a first
step would be to dump the assembly code for Fix.cc and see what is
happening with respect to the week definitions.  Then, looking at the
rtl may help to pinpoint where things are going wrong.  It's a fairly
recent change to the compiler that has caused the problem.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Segmentation fault building libg++ without named returns

[Manfred Hollstein]

On Saturday, 9 September 2000, 18:06:51 -0400, dave@hiauly1.hia.nrc.ca wrote:

> > Thanks for the patch you sent with your previous email; I observed the
> > same failures when Mark installed his patch to  warn about using named
> > return values.  I took a differend approach  than you, i.e. instead of
> > removing  the code completely, I used  the opposite logic  with a flag
> > _G_USE_NRV  as  opposed to the  former   _G_NO_NRV; I've attached that
> > patch to this email.
> 
> I tend to think the code should be removed.  There were essentially two
> sets with the "same" code.

I agree; however, I'll keep the code for some time, at least until it's
working again with the current gcc versions.... and until I've checked
the _NO_NRV code works with older compilers, too.

> However, the unused branch which didn't use
> named returns had rotted a bit.  Apparently, `and', `or' and `xor' are
> c++ diagraphs and can't be used.

Yup, my fix included patches for this also.

> > Regarding the missing   weak symbols,  I'm pretty   much  at a   loss;
> > building Fix.cc and  Rational.cc  doesn't generate all  required  weak
> > symbols as  it  did  before; even worse,   using  a reduced test  case
> > doesn't fail to  generate those symbols...  I'll dig  further and keep
> > you informed.
> 
> I don't have any time this weekend to work on it but I think a first
> step would be to dump the assembly code for Fix.cc and see what is
> happening with respect to the week definitions.

I did already, they aren't even emitted...

> Then, looking at the
> rtl may help to pinpoint where things are going wrong.  It's a fairly
> recent change to the compiler that has caused the problem.
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Cheers, manfred.

Re: Segmentation fault building libg++ without named returns

[John David Anglin]

> > > Regarding the missing   weak symbols,  I'm pretty   much  at a   loss;
> > > building Fix.cc and  Rational.cc  doesn't generate all  required  weak
> > > symbols as  it  did  before; even worse,   using  a reduced test  case
> > > doesn't fail to  generate those symbols...  I'll dig  further and keep
> > > you informed.
> > 
> > I don't have any time this weekend to work on it but I think a first
> > step would be to dump the assembly code for Fix.cc and see what is
> > happening with respect to the week definitions.
> 
> I did already, they aren't even emitted...

Using your patch, I rebuilt Fix.o and Rational.o without optimisation.  With
no optimisation for these two modules, the weak symbols are there and the
testsuite has no failures.

Comparing the rtl, the rtl generated without optimisation has lots of calls
to Fix::~Fix(void) and the following code is in the assembler output:

        .weak   _._3Fix
	.type    _._3Fix,@function
_._3Fix:

The rtl at -O3 has no calls to Fix::~Fix(void), even in Fix.cc.00.rtl.
There is also no definition for Fix::~Fix(void) in the assemble output.

Things work ok under hpux 10.20.  Thus, the problem is in some way related
to the i386 linux configuration.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Segmentation fault building libg++ without named returns

[John David Anglin]

> The rtl at -O3 has no calls to Fix::~Fix(void), even in Fix.cc.00.rtl.
> There is also no definition for Fix::~Fix(void) in the assemble output.

If I specify `-fno-inline', the weak defines are output at -O3 in the
implementation object module.  It seems a runtime callable version of
an inline function is not being output when the function isn't static.  
For modules which include Fix.h but don't have `#pragma implementation',
it appears the functions defined in the interface are not being inlined
and a runtime callable version must exist.

I tried `-fkeep-inline-functions' but this results in the following errors:

In file included from /usr/include/math.h:348,
                 from ../../../../libstdc++/cmath:7,
		 from ../../../../libg++/src/builtin.h:33,
	 	 from ../../../../libg++/src/Fix.h:15,
	  	 from ../../../../libg++/src/Fix.cc:25:
/usr/include/bits/mathinline.h:583: output number 0 not directly addressable
...

This is the define that causes the problem in mathinline.h:

#define __lrint_code \
  long int __lrintres;                                                        \
  __asm__ __volatile__                                                        \
    ("fistpl %0"                                                              \
     : "=m" (__lrintres) : "t" (__x) : "st");                                 \
  return __lrintres
__MATH_INLINE long int
lrintf (float __x)
{
   __lrint_code;
}
...

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

libg++-2.8.1.3-20000914.diff.gz (was: Re: Segmentation fault building libg++ without named returns)

[Manfred Hollstein]

[-- Attachment #1: Type: text/plain, Size: 962 bytes --]

On Monday, 11 September 2000, 17:25:11 -0400, dave@hiauly1.hia.nrc.ca wrote:

> > The rtl at -O3 has no calls to Fix::~Fix(void), even in Fix.cc.00.rtl.
> > There is also no definition for Fix::~Fix(void) in the assemble output.
> 
> If I specify `-fno-inline', the weak defines are output at -O3 in the
> implementation object module.  It seems a runtime callable version of
> an inline function is not being output when the function isn't static.  
> For modules which include Fix.h but don't have `#pragma implementation',
> it appears the functions defined in the interface are not being inlined
> and a runtime callable version must exist.

Your analysis is correct and is similar to my observations. Since I
don't have enough time to fix this properly, I came up with the hack
to use -O0 on ia32-linux. I've attached the patch which supersedes the
former version -20000907; "make bootstrap check" ran successfully using
this patch.

Cheers.

l8er
manfred


[-- Attachment #2: libg++-2.8.1.3-20000914.diff.gz --]
[-- Type: application/x-gzip, Size: 3065 bytes --]

Re: libg++-2.8.1.3-20000914.diff.gz (was: Re: Segmentation fault building libg++ without named returns)

[John David Anglin]

> On Monday, 11 September 2000, 17:25:11 -0400, dave@hiauly1.hia.nrc.ca wrote:
> 
> > > The rtl at -O3 has no calls to Fix::~Fix(void), even in Fix.cc.00.rtl.
> > > There is also no definition for Fix::~Fix(void) in the assemble output.
> > 
> > If I specify `-fno-inline', the weak defines are output at -O3 in the
> > implementation object module.  It seems a runtime callable version of
> > an inline function is not being output when the function isn't static.  
> > For modules which include Fix.h but don't have `#pragma implementation',
> > it appears the functions defined in the interface are not being inlined
> > and a runtime callable version must exist.
> 
> Your analysis is correct and is similar to my observations. Since I
> don't have enough time to fix this properly, I came up with the hack
> to use -O0 on ia32-linux. I've attached the patch which supersedes the
> former version -20000907; "make bootstrap check" ran successfully using
> this patch.

I have found that the problem is in some way related to math inlines.  If
the build is done with __NO_MATH_INLINES defined, then Fix.o contains all
the required weak defines.  There are no testsuite failures with your
version -20000907 if I add -D__NO_MATH_INLINES to CXXFLAGS in the Makefile's.

The math inlines are output at optimisations above O0.  If the preprocessing
is done at -O0 and the compilation at -O3, the weak defines are there.  The
other way around doesn't work.

I have been poking around in cc1plus trying to find why the weak defines
aren't getting output when the math inlines are present.  If somebody more
familiar with code can suggest some places to look, it would be helpful.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Patch: Include WARN_CFLAGS in CFLAGS passed for building fixinc.sh

[John David Anglin]

> I noticed that Greg McGary's recent patch didn't include WARN_CFLAGS
> in the CFLAGS passed to mkfixinc.sh.  I think these should be passed
> as well.

This patch hasn't been reviewed yet.  Although passing WARN_CFLAGS to
mkfixinc.sh isn't very important at this time, I think there should be
consistency in the passing the flags to the various sub-makes.

I revamped the CFLAGS handling so that different flags could be used for
the initial compilations which might be done with a native compiler.  The
Makefile variables WARN1_CFLAGS and WARN2_CFLAGS are set by configure.
Currently, they are used for warning options and a compiler dependent
option on the vax.  Potentially, this method could be used to supply
compiler options on many other platforms.

I also noticed yesterday that the method of handling WARN_CFLAGS didn't
get updated for bootstrap4.  Thus, I have updated the original patch.
I have tested the patch with a complete bootstrap through to stage4
under i686 linux.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-09-21  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* Makefile.in (fixinc.sh): Include WARN_CFLAGS in exported CFLAGS.
	(stage_f): Pass WARN_CFLAGS separately as in stage_c and stage_e.

--- Makefile.in.orig	Tue Sep 19 13:01:29 2000
+++ Makefile.in	Thu Sep 21 15:01:25 2000
@@ -1964,7 +1964,7 @@
 	$(FIXINCSRCDIR)/server.c $(FIXINCSRCDIR)/gnu-regex.h \
 	$(FIXINCSRCDIR)/server.h $(FIXINCSRCDIR)/inclhack.def specs.ready
 	MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
-	CC="$(CC)"; CFLAGS="$(CFLAGS)"; LDFLAGS="$(LDFLAGS)"; \
+	CC="$(CC)"; CFLAGS="$(CFLAGS) $(WARN_CFLAGS)"; LDFLAGS="$(LDFLAGS)"; \
 	export MAKE srcdir CC CFLAGS LDFLAGS; \
 	cd ./fixinc; $(SHELL) $${srcdir}/mkfixinc.sh $(target)
 
@@ -2792,7 +2792,7 @@
 
 # For bootstrap4:
 stage_f: stage_e
-	+$(MAKE) CC="stage3/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage3/" CFLAGS="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage3/ LANGUAGES="$(LANGUAGES)"
+	+$(MAKE) CC="stage3/xgcc$(exeext) -B$(build_tooldir)/bin/ -Bstage3/" CFLAGS="$(BOOT_CFLAGS)" WARN_CFLAGS="$(WARN2_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage3/ LANGUAGES="$(LANGUAGES)"
 	touch stage_f
 
 # Additional steps for *-lean targets:

PATCH: Re: libio compilation problem

[John David Anglin]

> The following errors occur compiling libio/genops.c under vax-ultrix:
> 
> /usr/local/src/gnu/gcc-2.96/objdir/gcc/xgcc -B/usr/local/src/gnu/gcc-2.96/objdir
> /gcc/ -B/usr/local/vax-dec-ultrix4.3/bin/ -c -O3 -I. -I../../../libio  ../../../
> libio/genops.c
> ../../../libio/genops.c:472: conflicting types for `_IO_default_seekpos'
> ../../../libio/libioP.h:349: previous declaration of `_IO_default_seekpos'
> ../../../libio/genops.c:556: conflicting types for `_IO_default_seekoff'
> ../../../libio/libioP.h:348: previous declaration of `_IO_default_seekoff'
> ../../../libio/genops.c:887: conflicting types for `_IO_default_seek'
> ../../../libio/libioP.h:358: previous declaration of `_IO_default_seek'

The enclosed patch changes the implementation to match the interface
specification defined in libioP.h.  It compiles under vax-dec-ultrix4.3
and I have done a complete make check under i686 linux.

In the 64 bit version of _IO_file_fopen, there is an extra parameter `tbd'
which is not used in the implementation.  I don't have any documentation
as to what it's for.  Possibly, somebody should check that libio works
ok with 64 bits and figure out if tbd is needed or just a mistake.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-09-29  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* fileops.c (_IO_file_fopen): Change implementation to match
	prototype in libioP.h.
	(_IO_file_seekoff): Likewise.
	(_IO_file_seek): Likewise.
	genops.c (_IO_default_seekpos): Likewise.
	(_IO_default_seekoff): Likewise.
	(_IO_default_seek): Likewise.
	ioseekoff.c (_IO_seekoff): Likewise.
	ioseekpos.c (_IO_seekpos): Likewise.
	strops.c (_IO_str_seekoff): Likewise.
	libioP.h: Always check that _G_IO_IO_FILE_VERSION is defined before
	testing version.

--- fileops.c.orig	Mon Apr 12 14:27:49 1999
+++ fileops.c	Fri Sep 29 11:07:29 2000
@@ -155,11 +155,20 @@
   _IO_default_finish (fp, 0);
 }
 
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+_IO_FILE *
+_IO_file_fopen (fp, filename, mode, tbd)
+     _IO_FILE *fp;
+     const char *filename;
+     const char *mode;
+     int tbd;
+#else
 _IO_FILE *
 _IO_file_fopen (fp, filename, mode)
      _IO_FILE *fp;
      const char *filename;
      const char *mode;
+#endif
 {
   int oflags = 0, omode;
   int read_write, fdesc;
@@ -419,14 +428,27 @@
   return retval;
 }
 
-_IO_pos_t
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+_IO_off64_t
+_IO_file_seekoff (fp, offset, dir, mode)
+     _IO_FILE *fp;
+     _IO_off64_t offset;
+     int dir;
+     int mode;
+#else
+_IO_off_t
 _IO_file_seekoff (fp, offset, dir, mode)
      _IO_FILE *fp;
      _IO_off_t offset;
      int dir;
      int mode;
+#endif
 {
-  _IO_pos_t result;
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+  _IO_off64_t result;
+#else
+  _IO_off_t result;
+#endif
   _IO_off_t delta, new_offset;
   long count;
   /* POSIX.1 8.2.3.7 says that after a call the fflush() the file
@@ -587,11 +609,19 @@
   return read (fp->_fileno, buf, size);
 }
 
-_IO_pos_t
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+_IO_off64_t
+_IO_file_seek (fp, offset, dir)
+     _IO_FILE *fp;
+     _IO_off64_t offset;
+     int dir;
+#else
+_IO_off_t
 _IO_file_seek (fp, offset, dir)
      _IO_FILE *fp;
      _IO_off_t offset;
      int dir;
+#endif
 {
   return lseek (fp->_fileno, offset, dir);
 }
--- genops.c.orig	Thu Mar  4 19:19:08 1999
+++ genops.c	Thu Sep 28 22:24:25 2000
@@ -467,13 +467,21 @@
     return fp;
 }
 
-_IO_pos_t
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+_IO_off64_t
 _IO_default_seekpos (fp, pos, mode)
      _IO_FILE *fp;
-     _IO_pos_t pos;
+     _IO_off64_t pos;
      int mode;
+#else
+_IO_off_t
+_IO_default_seekpos (fp, pos, mode)
+     _IO_FILE *fp;
+     _IO_off_t pos;
+     int mode;
+#endif
 {
-  return _IO_SEEKOFF (fp, _IO_pos_as_off (pos), 0, mode);
+  return _IO_SEEKOFF (fp, pos, 0, mode);
 }
 
 int
@@ -551,12 +559,21 @@
   _IO_un_link (fp);
 }
 
-_IO_pos_t
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+_IO_off64_t
+_IO_default_seekoff (fp, offset, dir, mode)
+     _IO_FILE *fp;
+     _IO_off64_t offset;
+     int dir;
+     int mode;
+#else
+_IO_off_t
 _IO_default_seekoff (fp, offset, dir, mode)
      _IO_FILE *fp;
      _IO_off_t offset;
      int dir;
      int mode;
+#endif
 {
     return _IO_pos_BAD;
 }
@@ -882,11 +899,19 @@
   return (unsigned char) *fp->_IO_read_ptr;
 }
 
-_IO_pos_t
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+_IO_off64_t
+_IO_default_seek (fp, offset, dir)
+     _IO_FILE *fp;
+     _IO_off64_t offset;
+     int dir;
+#else
+_IO_off_t
 _IO_default_seek (fp, offset, dir)
      _IO_FILE *fp;
      _IO_off_t offset;
      int dir;
+#endif
 {
   return _IO_pos_BAD;
 }
--- ioseekoff.c.orig	Tue Sep 16 12:00:21 1997
+++ ioseekoff.c	Thu Sep 28 22:30:27 2000
@@ -25,14 +25,27 @@
 
 #include <libioP.h>
 
-_IO_pos_t
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+_IO_off64_t
+_IO_seekoff (fp, offset, dir, mode)
+     _IO_FILE *fp;
+     _IO_off64_t offset;
+     int dir;
+     int mode;
+#else
+_IO_off_t
 _IO_seekoff (fp, offset, dir, mode)
      _IO_FILE *fp;
      _IO_off_t offset;
      int dir;
      int mode;
+#endif
 {
-  _IO_pos_t retval;
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+  _IO_off64_t retval;
+#else
+  _IO_off_t retval;
+#endif
 
   /* If we have a backup buffer, get rid of it, since the __seekoff
      callback may not know to do the right thing about it.
--- ioseekpos.c.orig	Tue Sep 16 12:00:23 1997
+++ ioseekpos.c	Thu Sep 28 22:33:42 2000
@@ -25,13 +25,25 @@
 
 #include <libioP.h>
 
-_IO_pos_t
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+_IO_off64_t
 _IO_seekpos (fp, pos, mode)
      _IO_FILE *fp;
-     _IO_pos_t pos;
+     _IO_off64_t pos;
      int mode;
+#else
+_IO_off_t
+_IO_seekpos (fp, pos, mode)
+     _IO_FILE *fp;
+     _IO_off_t pos;
+     int mode;
+#endif
 {
-  _IO_pos_t retval;
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+  _IO_off64_t retval;
+#else
+  _IO_off_t retval;
+#endif
 
   /* If we have a backup buffer, get rid of it, since the __seekoff
      callback may not know to do the right thing about it.
--- strops.c.orig	Fri May 22 16:40:02 1998
+++ strops.c	Thu Sep 28 22:56:35 2000
@@ -205,15 +205,28 @@
 	  - fp->_IO_read_base);
 }
 
-_IO_pos_t
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+_IO_off64_t
 _IO_str_seekoff (fp, offset, dir, mode)
      _IO_FILE *fp;
      _IO_off_t offset;
      int dir;
      int mode;
+#else
+_IO_off_t
+_IO_str_seekoff (fp, offset, dir, mode)
+     _IO_FILE *fp;
+     _IO_off_t offset;
+     int dir;
+     int mode;
+#endif
 {
   _IO_ssize_t cur_size = _IO_str_count (fp);
-  _IO_pos_t new_pos = EOF;
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
+  _IO_off64_t new_pos = EOF;
+#else
+  _IO_off_t new_pos = EOF;
+#endif
 
   /* Move the get pointer, if requested. */
   if (mode & _IOS_INPUT)
--- libioP.h.orig	Fri Jun 30 11:25:33 2000
+++ libioP.h	Fri Sep 29 10:55:40 2000
@@ -233,7 +233,7 @@
 typedef int (*_IO_stat_t) __PMT ((_IO_FILE *, void *));
 #define _IO_SYSSTAT(FP, BUF) JUMP1 (__stat, FP, BUF)
 
-#if _G_IO_IO_FILE_VERSION == 0x20001
+#if defined(_G_IO_IO_FILE_VERSION) && _G_IO_IO_FILE_VERSION == 0x20001
 /* The 'showmany' hook can be used to get an image how much input is
    available.  In many cases the answer will be 0 which means unknown
    but some cases one can provide real information.  */

Re: PATCH: Upgrade floating comparisons on PA to support unordered operands

[John David Anglin]

> In testing this patch, I examined two other ieee tests which fail on the
> PA port.  A fix for the hugeval tests under 10.20 will be sent separately.
> The mzero2 tests still fail because the insns negdf2 and negsf2 are
> implemented as a subtract from +0, since no fneg instruction is available
> on the PA.  The problem is that, under the ieee standard, (+0.) - (+0.) = +0.

Actually, PA2.0 machines do have fneg.  However, it behaves identically to
fsub: fneg (+0.) yields +0.  Thus, it works as a subtract from +0. rather
than xor'ing the sign bit.  Look's like a little bug in the HP floating
point implementation.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: testcase for hppa64 gcc bug

[John David Anglin]

> > So I went down the path of trying to fix things properly by defining
> > ELIMINABLE_REGS and so on, but I ended in a maze of twisty little passages
> > labelled "Unrecognizable instruction", like this one:
> > 
> > /src/parisc/gcc/gcc/libgcc2.c: In function `__moddi3':
> > /src/parisc/gcc/gcc/libgcc2.c:601: Unrecognizable insn:
> > (insn 1289 209 1298 (set (reg:SI 50 %fr22)
> >         (subreg:SI (plus:DI (reg:DI 30 %r30)
> >                 (const_int -272 [0xfffffef0])) 0)) -1 (nil)
> >     (nil))
> > /src/parisc/gcc/gcc/libgcc2.c:601: Internal compiler error in
> > extract_insn, at recog.c:2134
> 
> I am making progress in trying to make the arg_pointer register eliminable.
> I have fixed the above problem.  What was happening was that reload_as_needed
> was incorrectly trying to eliminate the return from millicode calls which
> is also register r29.  I have figured out how to hide it from reload with
> unspec.
> 
> However, the compiler is now too good at eliminating the arg_pointer.  At
> -O3, it completely eliminates the arg_pointer.  However, as I read the ABI,
> the call must always set the arg_pointer before calls.

For the record, here is my final patch regarding making the arg_pointer
eliminable for TARGET_64BIT.  I think the code it generates is correct but
it hasn't been extensively tested.  However, I don't recommend it for
installation since in comparing the assembler code generated with and
without elimination for a couple of test cases, I didn't observe any
significant improvement in the code with the patch.  Possibly, the patch
implicitly disables elimination when the arg_pointer is needed.

I do find that Alan Modra's ARG_POINTER_INVARIANT patch needs to be installed
to get correct code with his test case.

There is one part of the patch below which I think needs to be installed.
That is

	(call, call_value): Always USE the arg_pointer for TARGET_64BIT.

The use for the arg_pointer needs to be pulled out of the `if (flag_pic)'.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-11-07  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa-linux64.h (ARG_POINTER_INVARIANT): Define even when the
	arg_pointer is being eliminated.
	(ELIMINABLE_REGS): Enable elimination of the arg_pointer.
	(INITIAL_ELIMINATION_OFFSET): Revise offsets for arg_pointer.
	* pa.md (mulsi3, divsi3, udivsi3, modsi3, umodsi3 and
	canonicalize_funcptr_for_compare): Put "(reg:SI 26)" inside
	unspec to prevent elimination.
	(call, call_value): Always USE the arg_pointer for TARGET_64BIT.
	Use the new addmovdi3 insn to load the arg_pointer register.
	(addmovdi3 and mov_from_r29_si): New insn and expand which prevent
	r29 from being eliminated in call setups and millicode returns.

--- pa-linux64.h.orig	Tue Oct 31 18:38:24 2000
+++ pa-linux64.h	Tue Nov  7 12:17:12 2000
@@ -209,21 +209,18 @@
    that grow to lower addresses.  What fun.  */
 #undef ARGS_GROW_DOWNWARD
 #undef ARG_POINTER_REGNUM
-#define ARG_POINTER_INVARIANT 0
 #define ARG_POINTER_REGNUM 29
+#define ARG_POINTER_INVARIANT 0
 #undef STATIC_CHAIN_REGNUM
 #define STATIC_CHAIN_REGNUM 31
 
-#if 1
-#define ARG_POINTER_INVARIANT 0
-#else
-/* If defined, this macro specifies a table of register pairs used to eliminate
-   unneeded registers that point into the stack frame.  */
+/* If defined, this macro specifies a table of register pairs used to
+   eliminate unneeded registers that point into the stack frame.  */
 
 #define ELIMINABLE_REGS							\
 {									\
-  {ARG_POINTER_REGNUM,	 STACK_POINTER_REGNUM},				\
   {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM},				\
+  {ARG_POINTER_REGNUM,	 STACK_POINTER_REGNUM},				\
   {ARG_POINTER_REGNUM,	 FRAME_POINTER_REGNUM},				\
 }
 
@@ -240,19 +237,18 @@
 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
   do								\
     {								\
-      int fsize;						\
+      int fsize = compute_frame_size (get_frame_size (), 0);	\
 								\
       if ((TO) == FRAME_POINTER_REGNUM				\
 	  && (FROM) == ARG_POINTER_REGNUM)			\
 	{							\
-	  (OFFSET) = - current_function_pretend_args_size - 16;	\
+	  (OFFSET) = fsize + 48 - current_function_outgoing_args_size;	\
 	  break;						\
 	}							\
 								\
       if ((TO) != STACK_POINTER_REGNUM)				\
 	abort ();						\
 								\
-      fsize = compute_frame_size (get_frame_size (), 0);	\
       switch (FROM)						\
 	{							\
 	case FRAME_POINTER_REGNUM:				\
@@ -260,14 +256,13 @@
 	  break;						\
 								\
 	case ARG_POINTER_REGNUM:				\
-	  (OFFSET) = - fsize - current_function_pretend_args_size - 16;	\
+	  (OFFSET) = 48 - current_function_outgoing_args_size;  \
 	  break;						\
 								\
 	default:						\
 	  abort ();						\
 	}							\
     } while (0)
-#endif
 
 #undef SELECT_RTX_SECTION
 #define SELECT_RTX_SECTION(MODE,RTX)	\
--- pa.md.orig	Tue Nov  7 13:50:34 2000
+++ pa.md.work	Wed Nov  8 14:06:05 2000
@@ -3993,7 +3993,7 @@
 	      (clobber (reg:SI 26))
 	      (clobber (reg:SI 25))
 	      (clobber (reg:SI 31))])
-   (set (match_operand:SI 0 "general_operand" "") (reg:SI 29))]
+   (set (match_operand:SI 0 "general_operand" "") (unspec:SI [(reg:SI 29)] 0))]
   ""
   "
 {
@@ -4139,7 +4139,7 @@
 	      (clobber (reg:SI 26))
 	      (clobber (reg:SI 25))
 	      (clobber (reg:SI 31))])
-   (set (match_operand:SI 0 "general_operand" "") (reg:SI 29))]
+   (set (match_operand:SI 0 "general_operand" "") (unspec:SI [(reg:SI 29)] 0))]
   ""
   "
 {
@@ -4197,7 +4197,7 @@
 	      (clobber (reg:SI 26))
 	      (clobber (reg:SI 25))
 	      (clobber (reg:SI 31))])
-   (set (match_operand:SI 0 "general_operand" "") (reg:SI 29))]
+   (set (match_operand:SI 0 "general_operand" "") (unspec:SI [(reg:SI 29)] 0))]
   ""
   "
 {
@@ -4255,7 +4255,7 @@
 	      (clobber (reg:SI 26))
 	      (clobber (reg:SI 25))
 	      (clobber (reg:SI 31))])
-   (set (match_operand:SI 0 "general_operand" "") (reg:SI 29))]
+   (set (match_operand:SI 0 "general_operand" "") (unspec:SI [(reg:SI 29)] 0))]
   ""
   "
 {
@@ -4310,7 +4310,7 @@
 	      (clobber (reg:SI 26))
 	      (clobber (reg:SI 25))
 	      (clobber (reg:SI 31))])
-   (set (match_operand:SI 0 "general_operand" "") (reg:SI 29))]
+   (set (match_operand:SI 0 "general_operand" "") (unspec:SI [(reg:SI 29)] 0))]
   ""
   "
 {
@@ -5785,9 +5785,9 @@
     op = XEXP (operands[0], 0);
 
   if (TARGET_64BIT)
-    emit_move_insn (arg_pointer_rtx,
-		    gen_rtx_PLUS (word_mode, virtual_outgoing_args_rtx,
-				  GEN_INT (64)));
+    emit_insn (gen_addmovdi3 (arg_pointer_rtx,
+			      virtual_outgoing_args_rtx,
+			      GEN_INT (64)));
 
   /* Use two different patterns for calls to explicitly named functions
      and calls through function pointers.  This is necessary as these two
@@ -5809,13 +5809,14 @@
       call_insn = emit_call_insn (gen_call_internal_reg (operands[1]));
     }
 
+  if (TARGET_64BIT)
+    use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), arg_pointer_rtx);
+
   if (flag_pic)
     {
       use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), pic_offset_table_rtx);
       use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn),
 	       gen_rtx_REG (word_mode, PIC_OFFSET_TABLE_REGNUM_SAVED));
-      if (TARGET_64BIT)
-	use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), arg_pointer_rtx);
 
       /* After each call we must restore the PIC register, even if it
 	 doesn't appear to be used.
@@ -5961,9 +5962,9 @@
     op = XEXP (operands[1], 0);
 
   if (TARGET_64BIT)
-    emit_move_insn (arg_pointer_rtx,
-		    gen_rtx_PLUS (word_mode, virtual_outgoing_args_rtx,
-				  GEN_INT (64)));
+    emit_insn (gen_addmovdi3 (arg_pointer_rtx,
+			      virtual_outgoing_args_rtx,
+			      GEN_INT (64)));
 
   /* Use two different patterns for calls to explicitly named functions
      and calls through function pointers.  This is necessary as these two
@@ -5989,6 +5990,10 @@
       call_insn = emit_call_insn (gen_call_value_internal_reg (operands[0],
 							       operands[2]));
     }
+
+  if (TARGET_64BIT)
+    use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), arg_pointer_rtx);
+
   if (flag_pic)
     {
       use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), pic_offset_table_rtx);
@@ -7124,7 +7129,7 @@
 	      (clobber (reg:SI 22))
 	      (clobber (reg:SI 31))])
    (set (match_operand:SI 0 "register_operand" "")
-	(reg:SI 29))]
+	(unspec:SI [(reg:SI 29)] 0))]
   "! TARGET_PORTABLE_RUNTIME && !TARGET_64BIT && !TARGET_ELF32"
   "
 {
@@ -7236,3 +7241,48 @@
   emit_insn (gen_blockage ());
   DONE;
 }")
+
+;; For TARGET_64BIT, the arg_pointer register is also used for millicode
+;; returns.  The ABI requires that the arg_pointer be set for all calls.
+;; When the arg_pointer is made an eliminable register, eliminate_regs
+;; will eliminate the arg_pointer register from the function call setup and
+;; millicode returns unless the arg_pointer is hidden in a use, clobber or
+;; unspec.
+
+;; This is for loading the arg_pointer in function calls.
+(define_insn "addmovdi3"
+  [(set (unspec:DI [(match_operand:DI 0 "register_operand" "=r,r")] 0)
+        (plus:DI (match_operand:DI 1 "register_operand" "r,r")
+		 (match_operand 2 "const_int_operand" "J,i")))
+   (set (match_dup 0) (match_dup 0))]
+  "TARGET_64BIT"
+  "@
+  ldo %2(%1),%0
+  ldil L'%G2,%0\;add,l %0,%1,%0"
+  [(set_attr "type" "binary,binary")
+   (set_attr "pa_combine_type" "addmove,none")
+   (set_attr "length" "4,8")])
+
+;; This is for millicode return.
+(define_expand "mov_from_r29_si"
+  [(set (match_operand:SI 0 "" "")
+        (unspec:SI [(reg:SI 29)] 0))]
+  ""
+  "
+{
+  if (!TARGET_64BIT)
+    {
+      rtx tmp = gen_rtx_REG (SImode, 29);
+      emit_insn (gen_movsi (operands[0], tmp));
+      DONE;
+    }
+}")
+
+(define_insn ""
+  [(set (match_operand:SI 0 "register_operand" "=r")
+	(unspec:SI [(reg:SI 29)] 0))]
+  ""
+  "copy %%r29,%0"
+  [(set_attr "type" "multi")
+   (set_attr "length" "4")])
+

Re: testcase for hppa64 gcc bug

[Alan Modra]

On Thu, 9 Nov 2000, John David Anglin wrote:

> I do find that Alan Modra's ARG_POINTER_INVARIANT patch needs to be installed
> to get correct code with his test case.

<Nag mode>This patch is identical in concept to this one 

2000-10-24  Richard Henderson  <rth@cygnus.com>

	* rtlanal.c (rtx_unstable_p, rtx_varies_p): Don't consider pic
	register stable if PIC_OFFSET_TABLE_REG_CALL_CLOBBERED.

Can someone please take a look at the patch?
http://gcc.gnu.org/ml/gcc-patches/2000-10/msg01028.html
<\Nag mode>

If it helps, I'm quite willing to negate the logic, and turn
ARG_POINTER_INVARIANT into ARG_POINTER_REG_CALL_CLOBBERED.  I hadn't seen
Richard's patch when I made mine.

Alan Modra
-- 
Linuxcare.  Support for the Revolution.

Re: testcase for hppa64 gcc bug

[Jeffrey A Law]

  In message <200011091739.MAA07483@hiauly1.hia.nrc.ca>you write:
  > For the record, here is my final patch regarding making the arg_pointer
  > eliminable for TARGET_64BIT.  I think the code it generates is correct but
  > it hasn't been extensively tested.  However, I don't recommend it for
  > installation since in comparing the assembler code generated with and
  > without elimination for a couple of test cases, I didn't observe any
  > significant improvement in the code with the patch.  Possibly, the patch
  > implicitly disables elimination when the arg_pointer is needed.
  > 
  > I do find that Alan Modra's ARG_POINTER_INVARIANT patch needs to be install
  > ed
  > to get correct code with his test case.
  > 
  > There is one part of the patch below which I think needs to be installed.
  > That is
  > 
  > 	(call, call_value): Always USE the arg_pointer for TARGET_64BIT.
  > 
  > The use for the arg_pointer needs to be pulled out of the `if (flag_pic)'.
  > 
  > Dave
  > -- 
  > J. David Anglin                                  dave.anglin@nrc.ca
  > National Research Council of Canada              (613) 990-0752 (FAX: 952-6
  > 605)
  > 
  > 2000-11-07  John David Anglin  <dave@hiauly1.hia.nrc.ca>
  > 
  > 	* pa-linux64.h (ARG_POINTER_INVARIANT): Define even when the
  > 	arg_pointer is being eliminated.
  > 	(ELIMINABLE_REGS): Enable elimination of the arg_pointer.
  > 	(INITIAL_ELIMINATION_OFFSET): Revise offsets for arg_pointer.
  > 	* pa.md (mulsi3, divsi3, udivsi3, modsi3, umodsi3 and
  > 	canonicalize_funcptr_for_compare): Put "(reg:SI 26)" inside
  > 	unspec to prevent elimination.
  > 	(call, call_value): Always USE the arg_pointer for TARGET_64BIT.
  > 	Use the new addmovdi3 insn to load the arg_pointer register.
  > 	(addmovdi3 and mov_from_r29_si): New insn and expand which prevent
  > 	r29 from being eliminated in call setups and millicode returns.
I haven't followed this discussion too closely.  Is this patch still needed
after some of the recent changes in how we compute liveness for the argument
pointer?
jeff

Re: testcase for hppa64 gcc bug

[John David Anglin]

>   > 2000-11-07  John David Anglin  <dave@hiauly1.hia.nrc.ca>
>   > 
>   > 	* pa-linux64.h (ARG_POINTER_INVARIANT): Define even when the
>   > 	arg_pointer is being eliminated.
>   > 	(ELIMINABLE_REGS): Enable elimination of the arg_pointer.
>   > 	(INITIAL_ELIMINATION_OFFSET): Revise offsets for arg_pointer.
>   > 	* pa.md (mulsi3, divsi3, udivsi3, modsi3, umodsi3 and
>   > 	canonicalize_funcptr_for_compare): Put "(reg:SI 26)" inside
>   > 	unspec to prevent elimination.
>   > 	(call, call_value): Always USE the arg_pointer for TARGET_64BIT.
>   > 	Use the new addmovdi3 insn to load the arg_pointer register.
>   > 	(addmovdi3 and mov_from_r29_si): New insn and expand which prevent
>   > 	r29 from being eliminated in call setups and millicode returns.
> I haven't followed this discussion too closely.  Is this patch still needed
> after some of the recent changes in how we compute liveness for the argument
> pointer?

I think this needs to be reexamined.  Allan's ARG_POINTER_INVARIANT patch
might not be needed now.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: testcase for hppa64 gcc bug

[Alan Modra]

On Tue, 5 Dec 2000, John David Anglin wrote:

> >   > 2000-11-07  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> >   > 
> >   > 	* pa-linux64.h (ARG_POINTER_INVARIANT): Define even when the
> >   > 	arg_pointer is being eliminated.
> >   > 	(ELIMINABLE_REGS): Enable elimination of the arg_pointer.
> >   > 	(INITIAL_ELIMINATION_OFFSET): Revise offsets for arg_pointer.
> >   > 	* pa.md (mulsi3, divsi3, udivsi3, modsi3, umodsi3 and
> >   > 	canonicalize_funcptr_for_compare): Put "(reg:SI 26)" inside
> >   > 	unspec to prevent elimination.
> >   > 	(call, call_value): Always USE the arg_pointer for TARGET_64BIT.
> >   > 	Use the new addmovdi3 insn to load the arg_pointer register.
> >   > 	(addmovdi3 and mov_from_r29_si): New insn and expand which prevent
> >   > 	r29 from being eliminated in call setups and millicode returns.
> > I haven't followed this discussion too closely.  Is this patch still needed
> > after some of the recent changes in how we compute liveness for the argument
> > pointer?
> 
> I think this needs to be reexamined.  Allan's ARG_POINTER_INVARIANT patch
> might not be needed now.

It's still needed.  The problem is that gcc thinks the arg pointer is
unchanged from the entry value to a function, even when the arg pointer
needs to be set to call other functions.

Actually, given the nature of the problem, I'm inclined to think that all
targets that use an arg pointer should probably define
ARG_POINTER_INVARIANT = 0.  Or equivalently, don't apply my
ARG_POINTER_INVARIANT patch and simply remove tests for arg_pointer_rtx in
rtx_unstable_p, rtx_varies_p, rtx_addr_can_trap_p, function_invariant_p,
loop_invariant_p, and possibly other places I've missed.

Here's the testcase again:

extern void abort(void);

char p;

int f1 (char **);
int f2 (char *, char **);

char *f3 (char *a, char *b)
{
  char *c = 0;

  if (f1 (&b) != 0)
    goto out;

  /* hppa64 passes bogus value for b */
  f2 (b, &c);

out:
  return c;
}

int f1 (char **x)
{
  if (*x != &p)
    abort ();
  return 0;
}

int f2 (char *a, char **b)
{
  if (a != &p)
    abort ();
  *b += 1;
  return 0;
}

int main (void)
{
  if (f3 (0, &p) != (char *) 0 + 1)
    abort ();
  return 0;
}

Results of compiling with -O2 -S for hppa64-hpux11-gcc built from CVS
of less that an hour ago.

	.LEVEL 2.0w
gcc2_compiled.:
	.IMPORT f1,ENTRY
	.IMPORT f2,ENTRY
	.text
	.align 8
	.EXPORT f3,ENTRY
f3
	.PROC
	.CALLINFO FRAME=128,CALLS,SAVE_RP,ENTRY_GR=3
	.ENTRY
	std %r2,-16(%r30)
	ldo -56(%r29),%r26	! r26 = &b = r29 - 56
	ldo 128(%r30),%r30
	std %r4,-104(%r30)
	copy %r27,%r4
	std %r25,-56(%r29)
	ldo -16(%r30),%r29
	b,l f1,%r2
	std %r0,-120(%r30)
	ldo -16(%r30),%r29	! arg pointer set to current frame
	ldo -120(%r30),%r25
	cmpib,= 0,%r28,L$0005
	copy %r4,%r27
L$0004
	ldd -120(%r30),%r28
L$0006
	ldd -144(%r30),%r2
	ldd -104(%r30),%r4
	bve (%r2)
	ldo -128(%r30),%r30
L$0005
	ldo -64(%r29),%r29	! r29 = curr_r30 - 16 - 64
	b,l f2,%r2
	ldd 8(%r29),%r26	! try to load b from r29 - 56, but
				! gcc misses fact that r29 has changed
	b L$0006
	ldd -120(%r30),%r28
	.EXIT
	.PROCEND
[snip]

-- 
Linuxcare.  Support for the Revolution.

Re: testcase for hppa64 gcc bug

[Jeffrey A Law]

  In message <Pine.LNX.4.21.0012061607530.16721-100000@front.linuxcare.com.au>y
ou write:
  > > I think this needs to be reexamined.  Allan's ARG_POINTER_INVARIANT patch
  > > might not be needed now.
  > 
  > It's still needed.  The problem is that gcc thinks the arg pointer is
  > unchanged from the entry value to a function, even when the arg pointer
  > needs to be set to call other functions.
But the incoming argument pointer should have been copied into a pseudo at
the start of the function and the new pseudo used to address incoming args.

That's the real problem here I think.

jeff

PATCH: Re: ../../../libio/stream.cc:60: Internal error: Segmentation fault.

[John David Anglin]

> Program received signal SIGSEGV, Segmentation fault.
> 0x81df1aa in do_compare_and_jump (exp=0x40536de0, signed_code=GT,
>     unsigned_code=GTU, if_false_label=0x40533e80, if_true_label=0x0)
>     at ../../gcc/expr.c:10066
> 10066                 > GET_MODE_BITSIZE (TREE_TYPE (TREE_OPERAND (exp, 1))))))
> (gdb) disass 0x81df1aa 0x81df1b0
> Dump of assembler code from 0x81df1aa to 0x81df1b0:
> 0x81df1aa <do_compare_and_jump+842>:    mov    0x843d520(,%eax,4),%eax
> End of assembler dump.
> (gdb) info reg eax
> eax            0x40155400       1075139584
> 
> I think one of the changes in the last week has caused this.

The enclosed patch appears to fix the problem.  The bootstrap and check
now completes under i686 linux.  However, there are a huge number of
failures in g++ related tests.  For example,

spawn /home/dave/gnu/gcc-2.97/objdir/gcc/testsuite/../g++ -B/home/dave/gnu/gcc-2
.97/objdir/gcc/testsuite/../ /home/dave/gnu/gcc-2.97/gcc/testsuite/g++.old-deja/
g++.brendan/copy3.C -I/home/dave/gnu/gcc-2.97/libstdc++ -I/home/dave/gnu/gcc-2.9
7/libstdc++/stl -fmessage-length=0 -ansi -pedantic-errors -Wno-long-long -I/home
/dave/gnu/gcc-2.97/libio -I/home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu/libi
o -lstdc++ -L/home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu//libstdc++ -L/home
/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu//libiberty -lm -pthread -o /home/dav
e/gnu/gcc-2.97/objdir/gcc/testsuite/g++-brendan-copy3-C
/home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu//libstdc++/libstdc++.a(exceptio
n.o): In function `_ZNK9exception4whatEv':
/home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu/libstdc++/../../../libstdc++/ex
ception.cc:403: undefined reference to `__cxa_bad_typeid'
/home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu//libstdc++/libstdc++.a(tinfo2.o
): In function `_ZNK10__cxxabiv117__pbase_type_info10__do_catchEPK9type_infoPPvj
':
/home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu/libstdc++/../../../libstdc++/ti
nfo2.cc:176: undefined reference to `__cxa_bad_typeid'
/home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu/libstdc++/../../../libstdc++/ti
nfo2.cc:176: undefined reference to `__cxa_bad_typeid'
collect2: ld returned 1 exit status

Please review for installation.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Re: ../../../libio/stream.cc:60: Internal error: Segmentation fault.

[John David Anglin]

> 
> > Program received signal SIGSEGV, Segmentation fault.
> > 0x81df1aa in do_compare_and_jump (exp=0x40536de0, signed_code=GT,
> >     unsigned_code=GTU, if_false_label=0x40533e80, if_true_label=0x0)
> >     at ../../gcc/expr.c:10066
> > 10066                 > GET_MODE_BITSIZE (TREE_TYPE (TREE_OPERAND (exp, 1))))))
> > (gdb) disass 0x81df1aa 0x81df1b0
> > Dump of assembler code from 0x81df1aa to 0x81df1b0:
> > 0x81df1aa <do_compare_and_jump+842>:    mov    0x843d520(,%eax,4),%eax
> > End of assembler dump.
> > (gdb) info reg eax
> > eax            0x40155400       1075139584
> > 
> > I think one of the changes in the last week has caused this.
> 
> The enclosed patch appears to fix the problem.  The bootstrap and check
> now completes under i686 linux.  However, there are a huge number of
> failures in g++ related tests.  For example,
> 
> spawn /home/dave/gnu/gcc-2.97/objdir/gcc/testsuite/../g++ -B/home/dave/gnu/gcc-2
> .97/objdir/gcc/testsuite/../ /home/dave/gnu/gcc-2.97/gcc/testsuite/g++.old-deja/
> g++.brendan/copy3.C -I/home/dave/gnu/gcc-2.97/libstdc++ -I/home/dave/gnu/gcc-2.9
> 7/libstdc++/stl -fmessage-length=0 -ansi -pedantic-errors -Wno-long-long -I/home
> /dave/gnu/gcc-2.97/libio -I/home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu/libi
> o -lstdc++ -L/home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu//libstdc++ -L/home
> /dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu//libiberty -lm -pthread -o /home/dav
> e/gnu/gcc-2.97/objdir/gcc/testsuite/g++-brendan-copy3-C
> /home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu//libstdc++/libstdc++.a(exceptio
> n.o): In function `_ZNK9exception4whatEv':
> /home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu/libstdc++/../../../libstdc++/ex
> ception.cc:403: undefined reference to `__cxa_bad_typeid'
> /home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu//libstdc++/libstdc++.a(tinfo2.o
> ): In function `_ZNK10__cxxabiv117__pbase_type_info10__do_catchEPK9type_infoPPvj
> ':
> /home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu/libstdc++/../../../libstdc++/ti
> nfo2.cc:176: undefined reference to `__cxa_bad_typeid'
> /home/dave/gnu/gcc-2.97/objdir/i686-pc-linux-gnu/libstdc++/../../../libstdc++/ti
> nfo2.cc:176: undefined reference to `__cxa_bad_typeid'
> collect2: ld returned 1 exit status
> 
> Please review for installation.

Oops!

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-11-25  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* expr.c (do_compare_and_jump): Add missing TYPE_MODE in statement.

--- expr.c.orig	Sat Nov 25 17:33:17 2000
+++ expr.c	Sat Nov 25 20:22:18 2000
@@ -10063,7 +10063,8 @@
   if (TREE_CODE (TREE_OPERAND (exp, 0)) == INTEGER_CST
       && (TREE_CODE (TREE_OPERAND (exp, 1)) != INTEGER_CST
 	  || (GET_MODE_BITSIZE (mode)
-	      > GET_MODE_BITSIZE (TREE_TYPE (TREE_OPERAND (exp, 1))))))
+	      > GET_MODE_BITSIZE (TYPE_MODE (TREE_TYPE (TREE_OPERAND (exp,
+								      1)))))))
     {
       /* op0 might have been replaced by promoted constant, in which
 	 case the type of second argument should be used.  */

Re: PATCH: Re: ../../../libio/stream.cc:60: Internal error: Segmentation fault.

[Jeffrey A Law]

  In message < 200011260140.UAA17385@hiauly1.hia.nrc.ca >you write:
   > 
  > 2000-11-25  John David Anglin  <dave@hiauly1.hia.nrc.ca>
  > 
  > 	* expr.c (do_compare_and_jump): Add missing TYPE_MODE in statement.
Thanks.  Installed.

jeff

Re: PATCH: HUGE_VAL should be Infinity

[John David Anglin]

> > Nyet.  Recent HP chips (all PA2.0 variants) have fneg which provides an
> > ieee compliant negation.
> 
> Wrong.  I tried fneg on a C200 and again negation of +0. yielded +0.  The
> behaviour was identical to that of the 735.  Thus, I don't believe that
> all the new PA2.0 chips provide an ieee compliant negation.  HP is usually
> pretty good about this kind of thing which was why I wondered if there
> was some debate about the standard.

I retested this and it appears that I made a mistake in my original testing.
The fneg instruction on PA2.0 gear does negate +0. correctly.  Thus, there
is only a problem with PA1.0 and PA1.1 hardware which uses fsub.  The HP
compiler doesn't have the problem since it multiplies by -1. instead.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: HUGE_VAL should be Infinity

[Jeffrey A Law]

  In message <200011302016.PAA28575@hiauly1.hia.nrc.ca>you write:
  > The fneg instruction on PA2.0 gear does negate +0. correctly.  Thus, there
  > is only a problem with PA1.0 and PA1.1 hardware which uses fsub.  The HP
  > compiler doesn't have the problem since it multiplies by -1. instead.
I think there was a case where that's not 100% valid either, though I think
it would be closer to conforming behavior than fsub.

FWIW, it may be the case that PA1.0 had fneg -- I don't have my manuals
handy, but there were a few instructions in PA1.0 that got removed.

But I'm 100% certain fneg is available for PA2.0 and it does the right
thing (I already checked it some time ago).

jeff

Re: PATCH: HUGE_VAL should be Infinity

[Michael Meissner]

On Thu, Nov 30, 2000 at 11:19:21PM -0700, Jeffrey A Law wrote:
> 
>   In message <200011302016.PAA28575@hiauly1.hia.nrc.ca>you write:
>   > The fneg instruction on PA2.0 gear does negate +0. correctly.  Thus, there
>   > is only a problem with PA1.0 and PA1.1 hardware which uses fsub.  The HP
>   > compiler doesn't have the problem since it multiplies by -1. instead.
> I think there was a case where that's not 100% valid either, though I think
> it would be closer to conforming behavior than fsub.
> 
> FWIW, it may be the case that PA1.0 had fneg -- I don't have my manuals
> handy, but there were a few instructions in PA1.0 that got removed.

FWIW, FNEG is not in my 1989 manual, which I think is PA1.1.

> But I'm 100% certain fneg is available for PA2.0 and it does the right
> thing (I already checked it some time ago).
> 
> jeff

-- 
Michael Meissner, Red Hat, Inc.
PMB 198, 174 Littleton Road #3, Westford, Massachusetts 01886, USA
Work:	  meissner@redhat.com		phone: +1 978-486-9304
Non-work: meissner@spectacle-pond.org	fax:   +1 978-692-4482

Re: PATCH: HUGE_VAL should be Infinity

[John David Anglin]

> On Thu, Nov 30, 2000 at 11:19:21PM -0700, Jeffrey A Law wrote:
> > 
> >   In message <200011302016.PAA28575@hiauly1.hia.nrc.ca>you write:
> >   > The fneg instruction on PA2.0 gear does negate +0. correctly.  Thus, there
> >   > is only a problem with PA1.0 and PA1.1 hardware which uses fsub.  The HP
> >   > compiler doesn't have the problem since it multiplies by -1. instead.
> > I think there was a case where that's not 100% valid either, though I think
> > it would be closer to conforming behavior than fsub.
> > 
> > FWIW, it may be the case that PA1.0 had fneg -- I don't have my manuals
> > handy, but there were a few instructions in PA1.0 that got removed.
> 
> FWIW, FNEG is not in my 1989 manual, which I think is PA1.1.

Last week, I had concluded that hpux 10.20 emulates fneg on my PA1.1 machine
(a 735).

I am planning to implement ieee compatible negdf2 and negsf2 insns for
PA1.X machines.  It looked like multiplaction by -1 would be the most
efficient implementation since twiddling the sign bit of a floating
pointer register appears to involve copying to a general register via
memory and back again.  Multiplaction also looks simpler.  If Jeff can
recall whether or not there are corner effects with the multiplication
method it would be useful.

I have separated out a patch to make the hugeval test an expected failure
under HP-UX 9 and 10.  As far as I can seen, there is no way to fix this
problem under these OS's because their math libraries are inconsistent
with the current IEEE definition of HUGE_VAL.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2000-11-30  J. David Anglin  <dave@hiauly1.hia.nrc.ca>

	* hugeval.x: New.  Execution is expected to fail under hpux 9.X
	and 10.X because HUGE_VAL is DBL_MAX instead of +Infinity.

--- gcc.c-torture/execute/ieee/hugeval.x.orig	Wed Oct 18 13:51:17 2000
+++ gcc.c-torture/execute/ieee/hugeval.x	Wed Oct 18 15:01:21 2000
@@ -0,0 +1,10 @@
+# This test fails under hpux 9.X and 10.X because HUGE_VAL is DBL_MAX
+# instead of +Infinity.
+
+global target_triplet
+if { [istarget "hppa*-*-hpux9*"] || [istarget "hppa*-*-hpux10*"] } {
+      set torture_execute_xfail "$target_triplet"
+}
+
+return 0
+

Re: PATCH: HUGE_VAL should be Infinity

[Jeffrey A Law]

  In message < 200012041925.OAA06848@hiauly1.hia.nrc.ca >you write:
  > I am planning to implement ieee compatible negdf2 and negsf2 insns for
  > PA1.X machines.  It looked like multiplaction by -1 would be the most
  > efficient implementation since twiddling the sign bit of a floating
  > pointer register appears to involve copying to a general register via
  > memory and back again.  Multiplaction also looks simpler.  If Jeff can
  > recall whether or not there are corner effects with the multiplication
  > method it would be useful.
Found it.  fneg is non-arithmetic and does not cause an invalid operation
exception when a NaN is negated.

fmul is arithmetic and will cause exceptions.  Basically using any kind
of arithmetic insn to implement fneg loses in some form or another.


jeff

Re: PATCH: HUGE_VAL should be Infinity

[Jeffrey A Law]

  In message < 200012041925.OAA06848@hiauly1.hia.nrc.ca >you write:
  > 2000-11-30  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
  > 
  > 	* hugeval.x: New.  Execution is expected to fail under hpux 9.X
  > 	and 10.X because HUGE_VAL is DBL_MAX instead of +Infinity.
Thanks.  Installed.

jeff

Re: Revised patch: Re: PATCH 1: Re: BOOTSTRAP FAILURE: segementation fault in genattrtab

[John David Anglin]

> Here is a revised patch.  Tested with a bootstrap and check under hpux
> 10.20.  Please review and install if OK.

With the same three patches used in the bootstrap and check done yesterday
< http://gcc.gnu.org/ml/gcc-patches/2000-12/msg00882.html >, plus the above
patch and CVS source from 20001217, I reran another bootstrap and check.  The
results are here: < http://gcc.gnu.org/ml/gcc-testresults/2000-12/msg00195.html >.

There is one additional regression (g++.jason/2371.C) but all ports seem
to have started failing this test.

My assessment of the above patch is that is is not essential at the moment
but I am concerned that the REG_POINTER flag may be invalid for eliminated
registers after reload without it.  Thus, either the patch should be applied
or some comment added to this effect.  The register rename pass calls
gen_rtx_REG after reload.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: V3 PATCH: Some complex<> cleanup (1/2)

[Robert Lipe]

Gabriel Dos Reis wrote:

> This patch removes special casing of std::sqrt(const complex<T>&)
> implementation.  Hopefully, some of the problems reported in
> 
>    http://gcc.gnu.org/ml/gcc-bugs/2000-12/msg00158.html
> 
> should go away.

Thank you. libmath now compiles for me on my system with C99 vendor
headers.  I can see nothing int he ChangeLogs to make me suspect this
or any other recent, but after removing my various kludges and doing an
update in libstdc++-v3/ I now have a new error:

[ ... ] 
Making all in libio
make[2]: Nothing to be done for `all'.
Making all in libmath
make[2]: Nothing to be done for `all'.
Making all in libsupc++
make[2]: Nothing to be done for `all'.
Making all in src
make[2]: *** No rule to make target `limitsMEMBERS.cc', needed by `limitsMEMBERS
.lo'.  Stop.

It looks like this is supposed to be a generated file, but I don't see
anything obvious in Makefile* or configure* that generates it.   

Thanx!
RJL

Re: V3 PATCH: Some complex<> cleanup (1/2)

[Benjamin Kosnik]

> Thank you. libmath now compiles for me on my system with C99 vendor
> headers.  I can see nothing int he ChangeLogs to make me suspect this
> or any other recent, but after removing my various kludges and doing an

this part is good!

thanks Gaby.

> update in libstdc++-v3/ I now have a new error:
> 
> [ ... ] 
> Making all in libio
> make[2]: Nothing to be done for `all'.
> Making all in libmath
> make[2]: Nothing to be done for `all'.
> Making all in libsupc++
> make[2]: Nothing to be done for `all'.
> Making all in src
> make[2]: *** No rule to make target `limitsMEMBERS.cc', needed by `limitsMEMBERS
> .lo'.  Stop.

... better, but now quite there yet..

> It looks like this is supposed to be a generated file, but I don't see
> anything obvious in Makefile* or configure* that generates it.   

generated at configure time, by mknumeric_limits. What you can do is

rm stamp-limits
./config.status --recheck

in your build libstdc++-v3 directory. (Does stamp-limits exist?)

Look at the output from this, the very end part should look like this:

running mknumeric_limits
/mnt/hd/ahimsa/bld-x86-gcc-libio/i686-pc-linux-gnu/libstdc++-v3/../../gcc/g++ -B/mnt/hd/ahimsa/bld-x86-gcc-libio/i686-pc-linux-gnu/libstdc++-v3/../../gcc/  -I/mnt/hd/ahimsa/bld-x86-gcc-libio/i686-pc-linux-gnu/libstdc++-v3/include     -o /mnt/hd/ahimsa/bld-x86-gcc-libio/i686-pc-linux-gnu/libstdc++-v3/src/gen-num-limits /mnt/hd/bliss/src.gcc/libstdc++-v3/src/gen-num-limits.cc      -nodefaultlibs -lgcc -lc

It's probable that this doesn't end nicely for you. 

Can you do this and post what you find?

thanks,
benjamin

Re: V3 PATCH: Some complex<> cleanup (1/2)

[Robert Lipe]

> > make[2]: *** No rule to make target `limitsMEMBERS.cc', needed by `limitsMEMBERS.lo'.  Stop
> 
> > It looks like this is supposed to be a generated file, but I don't see
> > anything obvious in Makefile* or configure* that generates it.   
> 
> generated at configure time, by mknumeric_limits. What you can do is
> 
> rm stamp-limits
> ./config.status --recheck

I had suspected a configure-ish problem and had both run a config.status
--recheck and later (and rather therapeutically) a rm -r lib*v3 followed
by a manual configure invocation of lib*v3.  Neither changed the
symptoms I observed.

So I removed my objdir, updated my whole src tree, fixed a syntax error
in haifa and then crashed into the new ICE in combine.  I will try the
prompt suggestions from you and Gaby when the tree works again (sigh)
and get the results out.


Thanx for the fast help!
RJL

Re: V3 PATCH: Some complex<> cleanup (1/2)

[Robert Lipe]

Allrighty, after tweaks to gcc/Makefile to use -O0 when building
libgcc2, I'm back in the game, but this is my last message for the day.

> > make[2]: *** No rule to make target `limitsMEMBERS.cc', needed by `limitsMEMBERS
> > .lo'.  Stop.
> 
> 
> > It looks like this is supposed to be a generated file, but I don't see
> > anything obvious in Makefile* or configure* that generates it.   
> 
> generated at configure time, by mknumeric_limits. What you can do is
> 
> rm stamp-limits
> ./config.status --recheck
> 
> in your build libstdc++-v3 directory. (Does stamp-limits exist?)

Yes, stamp-limits exists, though it becomes clearer now that it probably
should not. :-)

checking <ctype> for Solaris 2.6,7,8... no
checking <ctype> for Solaris 2.5.1... yes
checking for strtof... (cached) yes
checking for strtold declaration... no
checking for unistd.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... (cached) no
updating cache ../config.cache
checking for locale.h... (cached) yes
checking for LC_MESSAGES... (cached) yes
checking for interface version number... v3
checking for --with-gxx-include-dir... no
checking for --enable-version-specific-runtime-libs... no
checking for /play/tmp/7/i686-pc-udk/libstdc++-v3/include
creating ./config.status
running mkc++config
running mknumeric_limits
/play/tmp/7/i686-pc-udk/libstdc++-v3/../../gcc/g++ -B/play/tmp/7/i686-pc-udk/lib
stdc++-v3/../../gcc/  -I/play/tmp/7/i686-pc-udk/libstdc++-v3/include     -o /pla
y/tmp/7/i686-pc-udk/libstdc++-v3/src/gen-num-limits /play/egcs/libstdc++-v3/src/
gen-num-limits.cc      -nodefaultlibs -lgcc -lc
In file included from /play/egcs/libstdc++-v3/src/gen-num-limits.cc:52:
/play/tmp/7/gcc/include/stdio.h:402:42: cstdio: No such file or directory
In file included from /play/egcs/libstdc++-v3/src/gen-num-limits.cc:53:
/play/tmp/7/gcc/include/signal.h:140:43: csignal: No such file or directory
In file included from /play/egcs/libstdc++-v3/src/gen-num-limits.cc:54:
/play/tmp/7/gcc/include/setjmp.h:75:43: csetjmp: No such file or directory
In file included from /play/egcs/libstdc++-v3/src/gen-num-limits.cc:55:
/play/tmp/7/gcc/include/math.h:786:41: cmath: No such file or directory
gen-num-limits failed to build, exiting.



Chasing this backwards, I can see the vendor <stdio.h> ends with:

#ifdef __cplusplus
}
#ifndef _CFRONT_3_0
#include <cstdio> /* for namespace std */
#endif
#endif /*__cplusplus*/

#endif /*_STDIO_H*/


Since we are C++ and we aren't CFRONT, we look for <cstdio>.  There
isn't one in libstdc++-v3 and the g++ we just built doesn't know where
to find the vendor one (/udk/usr/include/CC).  Where should we be
finding this?  Should we be getting the ones from the above dir?  Should
we perhaps be fixincluding this away?  It's easy to swing it either way;
I just need help deciding which way is the Right Way.

Since the compilation failed, shouldn't we 'exit 1' somewhere and NOT
create the stamp file?

RJL

Re: V3 PATCH: Some complex<> cleanup (1/2)

[Benjamin Kosnik]

> Yes, stamp-limits exists, though it becomes clearer now that it probably
> should not. :-)

yep. It should not.

> checking <ctype> for Solaris 2.6,7,8... no
> checking <ctype> for Solaris 2.5.1... yes
> checking for strtof... (cached) yes
> checking for strtold declaration... no
> checking for unistd.h... (cached) yes
> checking for getpagesize... (cached) yes
> checking for working mmap... (cached) no
> updating cache ../config.cache
> checking for locale.h... (cached) yes
> checking for LC_MESSAGES... (cached) yes
> checking for interface version number... v3
> checking for --with-gxx-include-dir... no
> checking for --enable-version-specific-runtime-libs... no
> checking for /play/tmp/7/i686-pc-udk/libstdc++-v3/include
> creating ./config.status
> running mkc++config
> running mknumeric_limits
> /play/tmp/7/i686-pc-udk/libstdc++-v3/../../gcc/g++ -B/play/tmp/7/i686-pc-udk/lib
> stdc++-v3/../../gcc/  -I/play/tmp/7/i686-pc-udk/libstdc++-v3/include     -o /pla
> y/tmp/7/i686-pc-udk/libstdc++-v3/src/gen-num-limits /play/egcs/libstdc++-v3/src/
> gen-num-limits.cc      -nodefaultlibs -lgcc -lc
> In file included from /play/egcs/libstdc++-v3/src/gen-num-limits.cc:52:
> /play/tmp/7/gcc/include/stdio.h:402:42: cstdio: No such file or directory
> In file included from /play/egcs/libstdc++-v3/src/gen-num-limits.cc:53:
> /play/tmp/7/gcc/include/signal.h:140:43: csignal: No such file or directory
> In file included from /play/egcs/libstdc++-v3/src/gen-num-limits.cc:54:
> /play/tmp/7/gcc/include/setjmp.h:75:43: csetjmp: No such file or directory
> In file included from /play/egcs/libstdc++-v3/src/gen-num-limits.cc:55:
> /play/tmp/7/gcc/include/math.h:786:41: cmath: No such file or directory
> gen-num-limits failed to build, exiting.
> 

Interesting. Thanks, this is very helpful. Includes like <cstdio> are in 
include/std/

If you're up for it, you may want to add that include path to the compile 
line above and see where that gets you.....

> Chasing this backwards, I can see the vendor <stdio.h> ends with:
> 
> #ifdef __cplusplus
> }
> #ifndef _CFRONT_3_0
> #include <cstdio> /* for namespace std */
> #endif
> #endif /*__cplusplus*/
> 
> #endif /*_STDIO_H*/

psycho.......... so what you could do is try adding it as above, or try 
to add

#define _CFRONT_3_0 1
 
in a config/os/unixware/bits/os_defines.h

Anyway. 

> Since we are C++ and we aren't CFRONT, we look for <cstdio>.  There
> isn't one in libstdc++-v3 and the g++ we just built doesn't know where
> to find the vendor one (/udk/usr/include/CC).  Where should we be
> finding this?  Should we be getting the ones from the above dir?  Should
> we perhaps be fixincluding this away?  It's easy to swing it either way;
> I just need help deciding which way is the Right Way.

ugh. So they have one? I would prefer that we just fixinclude this.

> Since the compilation failed, shouldn't we 'exit 1' somewhere and NOT
> create the stamp file?

definitely. There's already been some mail about it. 'stamp-limits' was a 
step in the right direction, but it only checks for the generation of 
(bld)/include/bits/std_limits.h, blah blah blah....we should error out 
sooner.

-benjamin

Re: V3 PATCH: Some complex<> cleanup (1/2)

[Gabriel Dos Reis]

Robert Lipe <robertl@sco.com> writes:

| Gabriel Dos Reis wrote:
| 
| > This patch removes special casing of std::sqrt(const complex<T>&)
| > implementation.  Hopefully, some of the problems reported in
| > 
| >    http://gcc.gnu.org/ml/gcc-bugs/2000-12/msg00158.html
| > 
| > should go away.
| 
| Thank you. libmath now compiles for me on my system with C99 vendor
| headers.  I can see nothing int he ChangeLogs to make me suspect this
| or any other recent, but after removing my various kludges and doing an
| update in libstdc++-v3/ I now have a new error:
| 
| [ ... ] 
| Making all in libio
| make[2]: Nothing to be done for `all'.
| Making all in libmath
| make[2]: Nothing to be done for `all'.
| Making all in libsupc++
| make[2]: Nothing to be done for `all'.
| Making all in src
| make[2]: *** No rule to make target `limitsMEMBERS.cc', needed by `limitsMEMBERS
| .lo'.  Stop.

Hmm... Usually this means something unfriendly went on at configure
time.  Please, could you tell me whether something was wrong during
configuration? 

| It looks like this is supposed to be a generated file, but I don't see
| anything obvious in Makefile* or configure* that generates it.   

limitsMEMBERS.cc is generated by a shell (mknumeric_limits) script at
configure time.

-- Gaby
CodeSourcery, LLC                       http://www.codesourcery.com

Re: problem with target builtin functions

[Herman ten Brugge]

Hello,

Some weeks ago I sent a patch that cured a problem with target builtin
functions. See:

http://gcc.gnu.org/ml/gcc-patches/2000-12/msg00596.html

I did mention that I did not test this on the arm and ia64 target. I have
done this now and the patch works also for both targets.

The testcase that fails for the ia64 is (compile with g++):

int a(int *c, int d);
int b(int *c, int d);

int a(int *c, int d) { return 0; }
int b(int *c, int d) { return a(c,d); }

The testcase that fails for the arm is:

void a(char *c);
void b(char *c);

void a(char *c) { ; }
void b(char *c) { a(c); }


The c-decl.c part of the patch can also be replaced by the patch from
"Joseph S. Myers". See:

http://gcc.gnu.org/ml/gcc-patches/2000-12/msg00082.html

This patch also calls MD_INIT_BUILTINS after creating void_list_node.

	Herman.

Re: PATCH: PIC_OFFSET_TABLE_REGNUM_SAVED should be call used when

[John David Anglin]

> >   > This patch is not fully tested because I have not been able to complete
> >   > a successful PIC bootstrap for other unrelated reasons.  However, I know
> >   > it corrects the ICE warning and I believe the PIC_OFFSET_TABLE_REGNUM_SAVED
> >   > register should be a call used register as per the documentation of call
> >   > used registers because it is a fixed register when PIC code is being
> >   > generated.
> >   > 
> >   > Dave
> >   > -- 
> >   > J. David Anglin                                  dave.anglin@nrc.ca
> >   > National Research Council of Canada              (613) 990-0752 (FAX: 952-6
> >   > 605)
> >   > 
> >   > 2000-12-02  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> >   > 
> >   > 	* pa32-regs.h (CONDITIONAL_REGISTER_USAGE): When generating pic code,
> >   > 	PIC_OFFSET_TABLE_REGNUM_SAVED is a call_used register.
> >   > 	* pa64-regs.h (CONDITIONAL_REGISTER_USAGE): Likewise.
> > Well, this patch is obviously correct, so I installed it.
> 
> Oops, there is a problem.  The PIC_OFFSET_TABLE_REGNUM_SAVED register
> must be call used under all conditions since non PIC code has to be able
> to call PIC code.

On further thought, the PIC_OFFSET_TABLE_REGNUM_SAVED can't be a call used
register since this will break the run-time ABI.  I think this means that
it can't be a fixed register as well.  Need a different solution.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: PIC_OFFSET_TABLE_REGNUM_SAVED should be call used when

[Alan Modra]

On Sun, 14 Jan 2001, John David Anglin wrote:

> > >   > 	* pa32-regs.h (CONDITIONAL_REGISTER_USAGE): When generating pic code,
> > >   > 	PIC_OFFSET_TABLE_REGNUM_SAVED is a call_used register.
> > >   > 	* pa64-regs.h (CONDITIONAL_REGISTER_USAGE): Likewise.
> > > Well, this patch is obviously correct, so I installed it.
> > 
> > Oops, there is a problem.  The PIC_OFFSET_TABLE_REGNUM_SAVED register
> > must be call used under all conditions since non PIC code has to be able
> > to call PIC code.
> 
> On further thought, the PIC_OFFSET_TABLE_REGNUM_SAVED can't be a call used
> register since this will break the run-time ABI.  I think this means that
> it can't be a fixed register as well.  Need a different solution.

Why will that break the ABI?  New code will just assume that r4 isn't
preserved over calls, but it's no problem if in fact r4 is preserved.  It
would only be a problem if you were trying to make r4 call preserved when
before it was call used.

Alan Modra
-- 
Linuxcare.  Support for the Revolution.

Re: PATCH: PIC_OFFSET_TABLE_REGNUM_SAVED should be call used when

[John David Anglin]

> > > Oops, there is a problem.  The PIC_OFFSET_TABLE_REGNUM_SAVED register
> > > must be call used under all conditions since non PIC code has to be able
> > > to call PIC code.
> > 
> > On further thought, the PIC_OFFSET_TABLE_REGNUM_SAVED can't be a call used
> > register since this will break the run-time ABI.  I think this means that
> > it can't be a fixed register as well.  Need a different solution.
> 
> Why will that break the ABI?  New code will just assume that r4 isn't
> preserved over calls, but it's no problem if in fact r4 is preserved.  It

If we make r4 call used, it isn't saved by the callee.  That's how I
noticed that there was a problem in the first place.  However, when r4
isn't call used, reload sometimes messes up.  I need to go back and look
at why.  However, I haven't had much luck with my builds lately.

It seems overkill to have both the caller and callee save r4.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: pa.md bugfix

[John David Anglin]

> There is one issue and one potential optimisation that I can see with respect
> to this patch.
> 
> > + ;; This can only be used in a leaf function, so we do
> > + ;; not need to use the PIC register.
> >   (define_insn "return"
> 
> This may not be correct.  The ABI indicates that the PIC register must
> be correctly set when the function returns.  This enables a correct return
> via a stub from a shared library.  If +O3 is used, rename registers may
> use the PIC register if we don't have a use in the return.  Remember,
> the PIC register is not a fixed register any more.

Hit self on head.  It is fixed and as a result register rename won't
touch it.

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: pa.md bugfix

[John David Anglin]

> There is a problem with the patch with respect rename registers, although not
> not the one I thought would occur.  It relates to having the use for r19
> present in the return for non PIC code.  This causes a failure in
> verify_local_live_at_start.

This patch fixes the problem and regains the use of the PIC register in
non PIC code.  I didn't try to fix the 64 bit mode problem that you
mentioned.  I presume this applies to r2 as well.

I have now done a complete bootstrap under 10.20 with this patch and
this one < http://gcc.gnu.org/ml/gcc-patches/2001-01/msg01785.html >
which I previously warned as being untested.  I did do several bootstraps
with it when it included EPILOGUE_USES.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-01-24  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa.md (return): Revise comment.
	(return_internal): Don't use PIC register.
	(return_internal_pic): New pattern.  Use PIC register.
	(epilogue): Generate return_internal or return_internal_pic depending
	on mode.

--- pa.md.save	Wed Jan 24 13:27:15 2001
+++ pa.md	Wed Jan 24 13:42:49 2001
@@ -5467,7 +5467,7 @@
 ;; Unconditional and other jump instructions.
 
 ;; This can only be used in a leaf function, so we do
-;; not need to use the PIC register.
+;; not need to use the PIC register for PIC mode.
 (define_insn "return"
   [(return)
    (use (reg:SI 2))
@@ -5482,17 +5482,29 @@
   [(set_attr "type" "branch")
    (set_attr "length" "4")])
 
-;; Use a different pattern for functions which have non-trivial
-;; epilogues so as not to confuse jump and reorg.
-;;
-;; We use the PIC register to ensure it's restored after a
-;; call in PIC mode.  This can be non-optimal for non-PIC
-;; code but the real world cost should be unmeasurable.
+;; Use a different return pattern for functions which have
+;; non-trivial epilogues so as not to confuse jump and reorg.
+;; This is for non PIC mode.
 (define_insn "return_internal"
   [(return)
-   (use (match_operand:SI 0 "register_operand" "r"))
    (use (reg:SI 2))
    (const_int 1)]
+  ""
+  "*
+{
+  if (TARGET_PA_20)
+    return \"bve%* (%%r2)\";
+  return \"bv%* %%r0(%%r2)\";
+}"
+  [(set_attr "type" "branch")
+   (set_attr "length" "4")])
+
+;; We use the PIC register to ensure it's restored after a
+;; call in PIC mode.
+(define_insn "return_internal_pic"
+  [(return)
+   (use (match_operand:SI 0 "register_operand" "r"))
+   (use (reg:SI 2))]
   "true_regnum (operands[0]) == PIC_OFFSET_TABLE_REGNUM"
   "*
 {
@@ -5525,14 +5537,17 @@
   /* Try to use the trivial return first.  Else use the full
      epilogue.  */
   if (hppa_can_use_return_insn_p ())
-   emit_jump_insn (gen_return ());
+    emit_jump_insn (gen_return ());
   else
     {
       rtx x;
 
       hppa_expand_epilogue ();
-      x = gen_return_internal (gen_rtx_REG (word_mode,
-					    PIC_OFFSET_TABLE_REGNUM));
+      if (flag_pic)
+	x = gen_return_internal_pic (gen_rtx_REG (word_mode,
+						  PIC_OFFSET_TABLE_REGNUM));
+      else
+	x = gen_return_internal ();
       emit_jump_insn (x);
     }
   DONE;

Re: pa.md bugfix

[John David Anglin]

> > There is a problem with the patch with respect rename registers, although not
> > not the one I thought would occur.  It relates to having the use for r19
> > present in the return for non PIC code.  This causes a failure in
> > verify_local_live_at_start.

Here is a revised patch which should apply correctly with the current
source.  Bootstrapped and checked under hpux 10.20.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-01-27  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa.md (return): Revise comment for trivial return.
	(return_internal): Non-trivial return pattern for non-PIC code.
	(return_internal_pic): Non-trivial return pattern for PIC code.
	It uses the PIC register to ensure it is restored after
	function calls.
	(epilogue): Generate appropriate return for PIC and non-PIC code.

--- pa.md.orig	Sat Jan 27 00:21:51 2001
+++ pa.md	Sat Jan 27 01:09:39 2001
@@ -5467,7 +5467,7 @@
 ;; Unconditional and other jump instructions.
 
 ;; This can only be used in a leaf function, so we do
-;; not need to use the PIC register.
+;; not need to use the PIC register when generating PIC code.
 (define_insn "return"
   [(return)
    (use (reg:SI 2))
@@ -5482,17 +5482,28 @@
   [(set_attr "type" "branch")
    (set_attr "length" "4")])
 
-;; Use a different pattern for functions which have non-trivial
+;; Emit a different pattern for functions which have non-trivial
 ;; epilogues so as not to confuse jump and reorg.
-;;
-;; We use the PIC register to ensure it's restored after a
-;; call in PIC mode.  This can be non-optimal for non-PIC
-;; code but the real world cost should be unmeasurable.
 (define_insn "return_internal"
   [(return)
-   (use (match_operand 0 "register_operand" "r"))
    (use (reg:SI 2))
    (const_int 1)]
+  ""
+  "*
+{
+  if (TARGET_PA_20)
+    return \"bve%* (%%r2)\";
+  return \"bv%* %%r0(%%r2)\";
+}"
+  [(set_attr "type" "branch")
+   (set_attr "length" "4")])
+
+;; Use the PIC register to ensure it's restored after a
+;; call in PIC mode.
+(define_insn "return_internal_pic"
+  [(return)
+   (use (match_operand 0 "register_operand" "r"))
+   (use (reg:SI 2))]
   "true_regnum (operands[0]) == PIC_OFFSET_TABLE_REGNUM"
   "*
 {
@@ -5531,8 +5542,11 @@
       rtx x;
 
       hppa_expand_epilogue ();
-      x = gen_return_internal (gen_rtx_REG (word_mode,
-					    PIC_OFFSET_TABLE_REGNUM));
+      if (flag_pic)
+	x = gen_return_internal_pic (gen_rtx_REG (word_mode,
+						  PIC_OFFSET_TABLE_REGNUM));
+      else
+	x = gen_return_internal ();
       emit_jump_insn (x);
     }
   DONE;

Re: pa.md bugfix

[Jeffrey A Law]

  In message < 200101272145.QAA24380@hiauly1.hia.nrc.ca >you write:
  > Here is a revised patch which should apply correctly with the current
  > source.  Bootstrapped and checked under hpux 10.20.
  > 
  > Dave
  > -- 
  > J. David Anglin                                  dave.anglin@nrc.ca
  > National Research Council of Canada              (613) 990-0752 (FAX: 952-6
  > 605)
  > 
  > 2001-01-27  John David Anglin  <dave@hiauly1.hia.nrc.ca>
  > 
  > 	* pa.md (return): Revise comment for trivial return.
  > 	(return_internal): Non-trivial return pattern for non-PIC code.
  > 	(return_internal_pic): Non-trivial return pattern for PIC code.
  > 	It uses the PIC register to ensure it is restored after
  > 	function calls.
  > 	(epilogue): Generate appropriate return for PIC and non-PIC code.
Thanks.  I installed this with a minor change.    Specifically 
return_internal verifies that flag_pic is zero and return_internal_pic
verifies that flag_pic is nonzero.

jeff

Re: [PATCH] Re: REG_DEAD/REG_EQUIV problem.

[John David Anglin]

> 
> > On Thu, 1 Feb 2001, Alan Modra wrote:
> > 
> > > (insn 17 15 21 (set (reg/v:DI 69)
> > >         (mem/u:DI (lo_sum:DI (reg:DI 70)
> > >                 (unspec:DI[ 
> > >                         (symbol_ref/v/f:DI ("*L$C0001"))
> > >                     ]  0)) 0)) 83 {*pa.md:2368} (insn_list 15 (nil))
> > >     (expr_list:REG_EQUIV (mem/u:DI (lo_sum:DI (reg:DI 70)
> > >                 (unspec:DI[ 
> > >                         (symbol_ref/v/f:DI ("*L$C0001"))
> > >                     ]  0)) 0)
> > >         (expr_list:REG_DEAD (reg:DI 70)
> > >             (nil))))
> > 
> > Whee, maybe I'll be a gcc hacker one day.
> > 
> > This fixes the problem for me.  I've no idea whether it's the ideal
> > solution - it may well be possible and desirable to prevent these
> > conflicting notes being issued.
> > 
> > gcc/ChangeLog
> >	* rtlanal.c (reg_death_note_p): New function.
> > 	(reg_mentioned_dies): New function.
> > 	* rtl.h (reg_mentioned_dies): Declare.
> > 	* reload1.c (reload): Don't set reg_equiv_memory_loc for an insn
> > 	that references memory via a reg that dies.

I am not certain this is totally sufficient.  I think it is possible for this
type of situation to occur:

(set (reg: A) (plus (reg: PIC) (high:SI (symbol_ref:SI ("X")))))

(set (reg: B) (mem/u:SI (lo_sum:SI (reg/f: A) (unspec:SI[(symbol_ref:SI ("X")]))))

(set (reg: C) (mem/u:SI (lo_sum:SI (reg/f: A) (unspec:SI[(symbol_ref:SI ("X")]))))
  (expr_list:REG_DEAD (reg: A) (nil))

...

(set (reg: D) (reg: B))

The last set may be in a different basic block than the one in which B is set.
Reload may try to substitute the MEM for B.  It won't notice that the register
mentioned in the MEM is dead.

It would appear that we need to check whether any registers mentioned in
the MEM are still alive at the point where D is set before substituting.

I have a modified patch which stops the generation of the REG_EQUIV note
in local-alloc (see below).  However, it won't work if the above situation
can occur.

There is also a problem with the above MEM being incorrectly substuted
into the insn at line 2099 of pa.md during reload.  I believe this is because
the Q constraint is relaxed during reload:

/* Subroutine for EXTRA_CONSTRAINT.

   Return 1 iff OP is a pseudo which did not get a hard register and
   we are running the reload pass.  */

#define IS_RELOADING_PSEUDO_P(OP) \
  ((reload_in_progress					\
    && GET_CODE (OP) == REG				\
    && REGNO (OP) >= FIRST_PSEUDO_REGISTER		\
    && reg_renumber [REGNO (OP)] < 0))

/* Optional extra constraints for this machine. Borrowed from sparc.h.

   For the HPPA, `Q' means that this is a memory operand but not a
   symbolic memory operand.  Note that an unassigned pseudo register
   is such a memory operand.  Needed because reload will generate
   these things in insns and then not re-recognize the insns, causing
   constrain_operands to fail.

   `R' is used for scaled indexed addresses.

   `S' is the constant 31.

   `T' is for fp loads and stores.  */
#define EXTRA_CONSTRAINT(OP, C)				\
  ((C) == 'Q' ?						\
   (IS_RELOADING_PSEUDO_P (OP)				\
    || (GET_CODE (OP) == MEM				\
	&& (memory_address_p (GET_MODE (OP), XEXP (OP, 0))\
	    || reload_in_progress)			\
	&& ! symbolic_memory_operand (OP, VOIDmode)	\
        && !(GET_CODE (XEXP (OP, 0)) == PLUS		\
	     && (GET_CODE (XEXP (XEXP (OP, 0), 0)) == MULT\
		 || GET_CODE (XEXP (XEXP (OP, 0), 1)) == MULT))))\
   : ((C) == 'R' ?					\
     (GET_CODE (OP) == MEM				\
      && GET_CODE (XEXP (OP, 0)) == PLUS		\
      && (GET_CODE (XEXP (XEXP (OP, 0), 0)) == MULT	\
	  || GET_CODE (XEXP (XEXP (OP, 0), 1)) == MULT)	\
      && (move_operand (OP, GET_MODE (OP))		\
	  || memory_address_p (GET_MODE (OP), XEXP (OP, 0))\
	  || reload_in_progress))			\


I have modified symbolic_memory_operand to detect pic symbolic references
and would like to get rid of the reload_in_progress stuff in EXTRA_CONSTRAINT.
This seems bogus to me and an attempt to work around some kind of reload
bug.  Maybe Jeff can recall why it is there?

A simple way to avoid the problem is to turn off the unchanging bit in
pic MEMs.  This prevents the REG_EQUIV notes from being generated.  I have
done a complete build with the unchanging bit off.  There are two testsuite
failures that I don't think are present in non PIC builds and checks.  These
are gcc.c-torture/compile/900313-1.c and gcc.c-torture/execute/941014-1.c:

Executing on host: /xxx/gnu/gcc-2.97/objdir/gcc/xgcc -B/xxx/gnu/gcc-2.97/objdir/gcc/ /xxx/gnu/gcc-2.97/gcc/testsuite/gcc.c-torture/compile/900313-1.c  -w  -O0 -c  -fPIC -o /xxx/gnu/gcc-2.97/objdir/gcc/testsuite/900313-1.o    (timeout = -1)
/xxx/gnu/gcc-2.97/gcc/testsuite/gcc.c-torture/compile/900313-1.c: In function `main':
/xxx/gnu/gcc-2.97/gcc/testsuite/gcc.c-torture/compile/900313-1.c:7: Insn does not satisfy its constraints:
(insn 104 55 107 (set (reg:SI 111)
	(reg:SI 1 %r1)) 69 {*pa.md:2099} (nil)
    (nil))
/xxx/gnu/gcc-2.97/gcc/testsuite/gcc.c-torture/compile/900313-1.c:7: confused by earlier errors, bailing out

I will try to figure out why SI 111 didn't get a hard register.

Comments?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-02-13  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* local-alloc.c (update_equiv_regs): Don't change a REG_EQUAL
	note to REG_EQUIV note if the MEM contains a reference to a
	register which dies in the insn.
	* rtlanal.c (reg_death_note_p): New function.
	(reg_mentioned_dies): New function.
	* rtl.h (reg_mentioned_dies): Declare.

--- local-alloc.c.orig	Fri Feb  2 00:54:57 2001
+++ local-alloc.c	Tue Feb 13 17:42:12 2001
@@ -822,6 +822,7 @@
       rtx set;
       rtx dest, src;
       int regno;
+      int mem_is_dead = 0;
 
       if (GET_CODE (insn) == NOTE)
 	{
@@ -956,9 +957,19 @@
       reg_equiv[regno].init_insns
 	= gen_rtx_INSN_LIST (VOIDmode, insn, reg_equiv[regno].init_insns);
 
+      /* Make sure that a MEM doesn't use a register that dies in
+	 this insn.  */
+      if (GET_CODE (src) == MEM)
+	{
+	  rtx death = find_reg_note (insn, REG_DEAD, NULL_RTX);
+	  if (death)
+	    if (reg_mentioned_dies (src, death))
+	      mem_is_dead = 1;
+	}
+
       /* If this register is known to be equal to a constant, record that
 	 it is always equivalent to the constant.  */
-      if (note && ! rtx_varies_p (XEXP (note, 0), 0))
+      if (note && ! mem_is_dead && ! rtx_varies_p (XEXP (note, 0), 0))
 	PUT_MODE (note, (enum machine_mode) REG_EQUIV);
 
       /* If this insn introduces a "constant" register, decrease the priority
--- rtl.h.orig	Sun Jan  7 13:39:19 2001
+++ rtl.h	Mon Feb 12 15:08:06 2001
@@ -1403,6 +1403,7 @@
 extern int computed_jump_p		PARAMS ((rtx));
 typedef int (*rtx_function)             PARAMS ((rtx *, void *));
 extern int for_each_rtx                 PARAMS ((rtx *, rtx_function, void *));
+extern int reg_mentioned_dies		PARAMS ((rtx, rtx));
 extern rtx regno_use_in			PARAMS ((unsigned int, rtx));
 extern int auto_inc_p			PARAMS ((rtx));
 extern void remove_node_from_expr_list	PARAMS ((rtx, rtx *));
--- rtlanal.c.orig	Thu Feb  8 14:05:50 2001
+++ rtlanal.c	Mon Feb 12 15:08:06 2001
@@ -27,6 +27,7 @@
 
 static void set_of_1		PARAMS ((rtx, rtx, void *));
 static void insn_dependent_p_1	PARAMS ((rtx, rtx, void *));
+static int reg_death_note_p	PARAMS ((rtx *, void *));
 
 /* Forward declarations */
 static int computed_jump_p_1	PARAMS ((rtx));
@@ -2327,6 +2328,34 @@
   return 0;
 }
 
+/* Predicate function for reg_mentioned_dies.  */
+
+static int
+reg_death_note_p (reg, notes)
+     rtx *reg;
+     void *notes;
+{
+  rtx link;
+
+  if (GET_CODE (*reg) != REG)
+    return 0;
+
+  for (link = (rtx) notes; link; link = XEXP (link, 1))
+    if (REG_NOTE_KIND (link) == REG_DEAD && *reg == XEXP (link, 0))
+      return 1;
+  return 0;
+}
+
+/* Return 1 if any register found in INSN has a REG_DEAD note in NOTES.  */
+
+int
+reg_mentioned_dies (insn, notes)
+     rtx insn;
+     rtx notes;
+{
+  return for_each_rtx (&insn, reg_death_note_p, notes);
+}
+
 /* Searches X for any reference to REGNO, returning the rtx of the
    reference found if any.  Otherwise, returns NULL_RTX.  */
 

Re: [PATCH] Re: REG_DEAD/REG_EQUIV problem.

[John David Anglin]

Following up on this,

> Executing on host: /xxx/gnu/gcc-2.97/objdir/gcc/xgcc -B/xxx/gnu/gcc-2.97/objdir/gcc/ /xxx/gnu/gcc-2.97/gcc/testsuite/gcc.c-torture/compile/900313-1.c  -w  -O0 -c  -fPIC -o /xxx/gnu/gcc-2.97/objdir/gcc/testsuite/900313-1.o    (timeout = -1)
> /xxx/gnu/gcc-2.97/gcc/testsuite/gcc.c-torture/compile/900313-1.c: In function `main':
> /xxx/gnu/gcc-2.97/gcc/testsuite/gcc.c-torture/compile/900313-1.c:7: Insn does not satisfy its constraints:
> (insn 104 55 107 (set (reg:SI 111)
> 	(reg:SI 1 %r1)) 69 {*pa.md:2099} (nil)
>     (nil))
> /xxx/gnu/gcc-2.97/gcc/testsuite/gcc.c-torture/compile/900313-1.c:7: confused by earlier errors, bailing out

it appears that reload is behaving rather strangely.  The following test
program will trigger the fault:

main ()
{
  alloca ((int) &main);;
}

Here is the crucial rtl from lreg:

(insn 13 8 15 (set (reg:SI 97)
        (plus:SI (reg:SI 19 %r19)
            (high:SI (symbol_ref/u:SI ("*L$C0000"))))) 80 {*pa.md:2326} (nil)
    (nil))

(insn 15 13 16 (set (reg:SI 97)
        (mem:SI (lo_sum:SI (reg:SI 97)
                (unspec:SI[ 
                        (symbol_ref/u:SI ("*L$C0000"))
                    ]  0)) 0)) 82 {*pa.md:2352} (nil)
    (nil))

(insn 16 15 18 (set (reg:SI 96)
        (reg:SI 97)) 69 {*pa.md:2099} (nil)
    (expr_list:REG_DEAD (reg:SI 97)
        (nil)))

(insn 18 16 20 (set (reg:SI 97)
        (mem:SI (reg:SI 96) 0)) 69 {*pa.md:2099} (nil)
    (expr_list:REG_DEAD (reg:SI 96)
        (nil)))

(insn 20 18 21 (set (reg:SI 96)
        (reg:SI 97)) 69 {*pa.md:2099} (nil)
    (expr_list:REG_DEAD (reg:SI 97)
        (nil)))

For some reason not obvious to me, the reloads are not done properly for
insns 18 and 20.  In paricular, SI 97 isn't eliminated.  The rtl from the
greg pass is below.  Any thoughts on what is going wrong?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

;; Function main

Spilling for insn 13.
Using reg 1 for reload 0
Spilling for insn 15.
Using reg 20 for reload 1
Spilling for insn 16.
Using reg 20 for reload 0
Using reg 20 for reload 1
Spilling for insn 18.
Using reg 20 for reload 0
Using reg 20 for reload 1
Spilling for insn 20.
Using reg 20 for reload 0
Using reg 20 for reload 1
Spilling for insn 21.
Using reg 20 for reload 1
Spilling for insn 22.
Using reg 21 for reload 0

Reloads for insn # 13
Reload 0: reload_out (SI) = (reg:SI 97)
	R1_REGS, RELOAD_FOR_OUTPUT (opnum = 0)
	reload_out_reg: (reg:SI 97)
	reload_reg_rtx: (reg:SI 1 %r1)

Reloads for insn # 15
Reload 0: GENERAL_REGS, RELOAD_FOR_OUTPUT (opnum = 0)
	reload_out_reg: (reg:SI 97)
Reload 1: reload_in (SI) = (reg:SI 97)
	reload_out (SI) = (reg:SI 97)
	GENERAL_REGS, RELOAD_OTHER (opnum = 1)
	reload_in_reg: (reg:SI 97)
	reload_out_reg: (reg:SI 97)
	reload_reg_rtx: (reg:SI 20 %r20)

Reloads for insn # 16
Reload 0: reload_out (SI) = (reg:SI 96)
	GENERAL_REGS, RELOAD_FOR_OUTPUT (opnum = 0)
	reload_out_reg: (reg:SI 96)
	reload_reg_rtx: (reg:SI 21 %r21)
Reload 1: reload_in (SI) = (reg:SI 97)
	GENERAL_REGS, RELOAD_FOR_INPUT (opnum = 1)
	reload_in_reg: (reg:SI 97)
	reload_reg_rtx: (reg:SI 21 %r21)

Reloads for insn # 18
Reload 0: reload_in (SI) = (reg:SI 96)
	GENERAL_REGS, RELOAD_FOR_OPERAND_ADDRESS (opnum = 1)
	reload_in_reg: (reg:SI 96)
	reload_reg_rtx: (reg:SI 1 %r1)
Reload 1: reload_out (SI) = (reg:SI 97)
	GENERAL_REGS, RELOAD_FOR_OUTPUT (opnum = 0)
	reload_out_reg: (reg:SI 97)
	reload_reg_rtx: (reg:SI 1 %r1)

Reloads for insn # 20
Reload 0: reload_out (SI) = (reg:SI 96)
	GENERAL_REGS, RELOAD_FOR_OUTPUT (opnum = 0)
	reload_out_reg: (reg:SI 96)
	reload_reg_rtx: (reg:SI 20 %r20)
Reload 1: reload_in (SI) = (reg:SI 97)
	GENERAL_REGS, RELOAD_FOR_INPUT (opnum = 1)
	reload_in_reg: (reg:SI 97)
	reload_reg_rtx: (reg:SI 20 %r20)

Reloads for insn # 21
Reload 0: GENERAL_REGS, RELOAD_FOR_OUTPUT (opnum = 0)
	reload_out_reg: (reg:SI 96)
Reload 1: reload_in (SI) = (reg:SI 96)
	reload_out (SI) = (reg:SI 96)
	GENERAL_REGS, RELOAD_OTHER (opnum = 1)
	reload_in_reg: (reg:SI 96)
	reload_out_reg: (reg:SI 96)
	reload_reg_rtx: (reg:SI 21 %r21)

Reloads for insn # 22
Reload 0: reload_in (SI) = (reg:SI 96)
	GENERAL_REGS, RELOAD_FOR_INPUT (opnum = 1)
	reload_in_reg: (reg:SI 96)
	reload_reg_rtx: (reg:SI 1 %r1)
;; Register dispositions:
94 in 4  95 in 20  98 in 20  99 in 20  100 in 20  

;; Hard regs used:  1 2 3 4 19 20 21 28 30

(note 2 0 42 NOTE_INSN_DELETED -1347440721)

;; Start of basic block 0, registers live: 3 [%r3] 19 [%r19] 30 [%r30]
(note 42 2 5 [bb 0] NOTE_INSN_BASIC_BLOCK -1347440721)

(insn 5 42 3 (set (reg:SI 4 %r4 [94])
        (reg:SI 19 %r19)) 69 {*pa.md:2099} (nil)
    (nil))

(note 3 5 6 NOTE_INSN_FUNCTION_BEG -1347440721)

(call_insn 6 3 8 (parallel[ 
            (call (mem:SI (symbol_ref:SI ("@__main")) 0)
                (const_int 16 [0x10]))
            (clobber (reg:SI 2 %r2))
            (use (const_int 0 [0x0]))
        ] ) 270 {call_internal_symref} (nil)
    (expr_list:REG_EH_REGION (const_int 0 [0x0])
        (nil))
    (expr_list (use (reg:SI 19 %r19))
        (nil)))

(insn 8 6 13 (set (reg:SI 19 %r19)
        (reg:SI 4 %r4 [94])) 69 {*pa.md:2099} (nil)
    (nil))

(insn 13 8 46 (set (reg:SI 1 %r1)
        (plus:SI (reg:SI 19 %r19)
            (high:SI (symbol_ref/u:SI ("*L$C0000"))))) 80 {*pa.md:2326} (nil)
    (nil))

(insn 46 13 49 (set (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 12 [0xc])) 0)
        (reg:SI 1 %r1)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 49 46 15 (set (reg:SI 20 %r20)
        (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 12 [0xc])) 0)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 15 49 52 (set (reg:SI 20 %r20)
        (mem:SI (lo_sum:SI (reg:SI 20 %r20)
                (unspec:SI[ 
                        (symbol_ref/u:SI ("*L$C0000"))
                    ]  0)) 0)) 82 {*pa.md:2352} (nil)
    (nil))

(insn 52 15 58 (set (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 12 [0xc])) 0)
        (reg:SI 20 %r20)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 58 52 16 (set (reg:SI 21 %r21)
        (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 12 [0xc])) 0)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 16 58 55 (set (reg:SI 21 %r21)
        (reg:SI 21 %r21)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 55 16 61 (set (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 8 [0x8])) 0)
        (reg:SI 21 %r21)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 61 55 18 (set (reg:SI 1 %r1)
        (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 8 [0x8])) 0)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 18 61 64 (set (reg:SI 1 %r1)
        (mem:SI (reg:SI 1 %r1) 0)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 64 18 70 (set (reg:SI 97)
        (reg:SI 1 %r1)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 70 64 20 (set (reg:SI 20 %r20)
        (reg:SI 97)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 20 70 67 (set (reg:SI 20 %r20)
        (reg:SI 20 %r20)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 67 20 73 (set (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 8 [0x8])) 0)
        (reg:SI 20 %r20)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 73 67 21 (set (reg:SI 21 %r21)
        (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 8 [0x8])) 0)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 21 73 76 (set (reg:SI 21 %r21)
        (plus:SI (reg:SI 21 %r21)
            (const_int 7 [0x7]))) 169 {addsi3} (nil)
    (nil))

(insn 76 21 79 (set (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 8 [0x8])) 0)
        (reg:SI 21 %r21)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 79 76 22 (set (reg:SI 1 %r1)
        (mem:SI (plus:SI (reg/f:SI 3 %r3)
                (const_int 8 [0x8])) 0)) 69 {*pa.md:2099} (nil)
    (nil))

(insn 22 79 23 (set (reg:SI 20 %r20 [95])
        (plus:SI (reg:SI 1 %r1)
            (const_int 7 [0x7]))) 169 {addsi3} (nil)
    (nil))

(insn 23 22 25 (set (reg:SI 20 %r20 [98])
        (lshiftrt:SI (reg:SI 20 %r20 [95])
            (const_int 3 [0x3]))) 256 {lshrsi3} (nil)
    (expr_list:REG_EQUAL (udiv:SI (reg:SI 20 %r20 [95])
            (const_int 8 [0x8]))
        (nil)))

(insn 25 23 27 (set (reg:SI 20 %r20 [99])
        (reg:SI 20 %r20 [98])) 69 {*pa.md:2099} (nil)
    (nil))

(insn 27 25 30 (set (reg:SI 20 %r20 [100])
        (ashift:SI (reg:SI 20 %r20 [99])
            (const_int 3 [0x3]))) 242 {*pa.md:5111} (nil)
    (expr_list:REG_EQUAL (mult:SI (reg:SI 20 %r20 [98])
            (const_int 8 [0x8]))
        (nil)))

(insn 30 27 37 (set (reg/f:SI 30 %r30)
        (plus:SI (reg/f:SI 30 %r30)
            (reg:SI 20 %r20 [100]))) 169 {addsi3} (nil)
    (nil))

(note 37 30 39 NOTE_INSN_FUNCTION_END -1347440721)

(insn 39 37 41 (clobber (reg/i:SI 28 %r28)) -1 (nil)
    (nil))

(insn 41 39 43 (use (reg/i:SI 28 %r28)) -1 (nil)
    (nil))
;; End of basic block 0, registers live:
 3 [%r3] 19 [%r19] 28 [%r28] 30 [%r30]

(note 43 41 0 NOTE_INSN_DELETED -1347440721)

Re: Enum related fixes for gcc build with native cc on vax ultrix

[John David Anglin]

> The patch has been bootstrapped under vax ultrix, and a complete bootstrap
> check has been done under i686 linux.
> 
> Please review.

Some of this is now complete.  I enclose what remains to be OK'd.  In
my original post, I inadvertantly omitted the required changes to toplev.c.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-02-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* print-rtl.c (print_rtx): Cast enums to int for comparison.
	* c-decl.c (grokdeclarator): Cast enums to int for comparison and
	shifts.
	* c-format.c (C_STD_VER): Cast to int for comparisons.
	(check_function_format): Cast various enums to int for &.
	(maybe_read_dollar_number): Likewise.
	(check_format_info): Likewise.
	(check_format_info_main): Likewise.
	* function.c (purge_addressof_1): Revise to avoid using &= with enum
	result.
	* expr.c (emit_move_insn_1): Cast enums to unsigned int for comparison.
	(safe_from_p): Likewise.
	* varasm.c (const_hash): Cast enum to int for %.
	* emit-rtl.c (init_emit_once): Use int loop variable to work around
	pcc enum problems with < and ++ operators.
	* regclass.c (init_reg_sets_1): Cast enums for comparison.
	(choose_hard_reg_mode): Use unsigned int to iterate over CCmodes.
	(regclass_init): Change enum class to int to iterate over reg_classes.
	* genrecog.c (merge_trees): Cast enums for comparison.
	* rtl.h (GET_CODE): Cast to enum rtx_code.
	(PUT_CODE): Cast to ENUM_BITFIELD(rtx_code).
	(GET_MODE): Cast to enum machine_mode.
	(PUT_MODE): Cast to ENUM_BITFIELD(machine_mode).
	(GET_NOTE_INSN_NAME): Cast enum to int.
	* tree.h (TREE_CODE): Cast to enum tree_code.
	(TREE_SET_CODE): Cast VALUE to ENUM_BITFIELD(tree_code).
	* simplify-rtx.c (hash_rtx): Cast enums to unsigned unt.
        * timevar.c (timevar_print): Change loop variable id from enum to
	unsigned int.
	* fixinc/fixincl.c (VLEVEL): Cast enums in comparison to unsigned int.
	* fixinc/fixlib.h (bool_t): Add identifier `boolean' in typedef.
	* fixinc/server.c (read_pipe_timeout): Use enum boolean instead of
	bool_t in declaration because pcc can't combine volatile with typedef
	types.
	* config/i386/i386.md: Use PUT_MODE for mode assignment.
	* toplev.c (compile_file): Cast enum DFI to int.
	(decode_d_option): Likewise.

--- print-rtl.c.orig	Fri Jan  5 18:30:02 2001
+++ print-rtl.c	Mon Feb 19 12:32:23 2001
@@ -364,8 +364,8 @@
       /* Print NOTE_INSN names rather than integer codes.  */
 
       case 'n':
-	if (XINT (in_rtx, i) >= NOTE_INSN_BIAS
-	    && XINT (in_rtx, i) < NOTE_INSN_MAX)
+	if (XINT (in_rtx, i) >= (int) NOTE_INSN_BIAS
+	    && XINT (in_rtx, i) < (int) NOTE_INSN_MAX)
 	  fprintf (outfile, " %s", GET_NOTE_INSN_NAME (XINT (in_rtx, i)));
 	else
 	  fprintf (outfile, " %d", XINT (in_rtx, i));
--- c-decl.c.orig	Fri Feb 16 17:17:22 2001
+++ c-decl.c	Mon Feb 19 12:30:57 2001
@@ -3915,9 +3915,9 @@
       if (TREE_CODE (id) == IDENTIFIER_NODE && C_IS_RESERVED_WORD (id))
 	{
 	  enum rid i = C_RID_CODE (id);
-	  if (i <= RID_LAST_MODIFIER)
+	  if ((int) i <= (int) RID_LAST_MODIFIER)
 	    {
-	      if (i == RID_LONG && specbits & (1<<i))
+	      if (i == RID_LONG && specbits & (1 << (int) i))
 		{
 		  if (longlong)
 		    error ("`long long long' is too long for GCC");
@@ -3929,9 +3929,9 @@
 		      longlong = 1;
 		    }
 		}
-	      else if (specbits & (1 << i))
+	      else if (specbits & (1 << (int) i))
 		pedwarn ("duplicate `%s'", IDENTIFIER_POINTER (id));
-	      specbits |= 1 << i;
+	      specbits |= 1 << (int) i;
 	      goto found;
 	    }
 	}
--- c-format.c.orig	Mon Feb 19 13:31:22 2001
+++ c-format.c	Mon Feb 19 13:49:00 2001
@@ -476,11 +476,11 @@
    or inheriting from, for the purpose of format features supported.  */
 #define CPLUSPLUS_STD_VER	STD_C89
 /* The C standard version we are checking formats against when pedantic.  */
-#define C_STD_VER		(c_language == clk_cplusplus		  \
+#define C_STD_VER		((int)(c_language == clk_cplusplus	  \
 				 ? CPLUSPLUS_STD_VER			  \
 				 : (flag_isoc99				  \
 				    ? STD_C99				  \
-				    : (flag_isoc94 ? STD_C94 : STD_C89)))
+				    : (flag_isoc94 ? STD_C94 : STD_C89))))
 /* The name to give to the standard version we are warning about when
    pedantic.  FEATURE_VER is the version in which the feature warned out
    appeared, which is higher than C_STD_VER.  */
@@ -1105,7 +1105,8 @@
 	  /* Yup; check it.  */
 	  check_format_info (status, info, params);
 	  if (warn_missing_format_attribute && info->first_arg_num == 0
-	      && (format_types[info->format_type].flags & FMT_FLAG_ARG_CONVERT))
+	      && (format_types[info->format_type].flags
+		  & (int) FMT_FLAG_ARG_CONVERT))
 	    {
 	      function_format_info *info2;
 	      for (info2 = function_format_list; info2; info2 = info2->next)
@@ -1298,7 +1299,7 @@
 	      nalloc - dollar_arguments_alloc);
       dollar_arguments_alloc = nalloc;
     }
-  if (!(fki->flags & FMT_FLAG_DOLLAR_MULTIPLE)
+  if (!(fki->flags & (int) FMT_FLAG_DOLLAR_MULTIPLE)
       && dollar_arguments_used[argnum - 1] == 1)
     {
       dollar_arguments_used[argnum - 1] = 2;
@@ -1434,7 +1435,7 @@
       /* Functions taking a va_list normally pass a non-literal format
 	 string.  These functions typically are declared with
 	 first_arg_num == 0, so avoid warning in those cases.  */
-      if (!(format_types[info->format_type].flags & FMT_FLAG_ARG_CONVERT))
+      if (!(format_types[info->format_type].flags & (int) FMT_FLAG_ARG_CONVERT))
 	{
 	  /* For strftime-like formats, warn for not checking the format
 	     string; but there are no arguments to check.  */
@@ -1746,7 +1747,7 @@
 	}
       flag_chars[0] = 0;
 
-      if ((fki->flags & FMT_FLAG_USE_DOLLAR) && has_operand_number != 0)
+      if ((fki->flags & (int) FMT_FLAG_USE_DOLLAR) && has_operand_number != 0)
 	{
 	  /* Possibly read a $ operand number at the start of the format.
 	     If one was previously used, one is required here.  If one
@@ -1867,7 +1868,7 @@
 		  ++format_chars;
 		}
 	      if (found_width && !non_zero_width_char &&
-		  (fki->flags & FMT_FLAG_ZERO_WIDTH_BAD))
+		  (fki->flags & (int) FMT_FLAG_ZERO_WIDTH_BAD))
 		status_warning (status, "zero width in %s format",
 				fki->name);
 	      if (found_width)
@@ -1954,7 +1955,7 @@
 	    }
 	  else
 	    {
-	      if (!(fki->flags & FMT_FLAG_EMPTY_PREC_OK)
+	      if (!(fki->flags & (int) FMT_FLAG_EMPTY_PREC_OK)
 		  && !ISDIGIT (*format_chars))
 		status_warning (status, "empty precision in %s format",
 				fki->name);
@@ -2025,7 +2026,7 @@
 	}
 
       /* Handle the scanf allocation kludge.  */
-      if (fki->flags & FMT_FLAG_SCANF_A_KLUDGE)
+      if (fki->flags & (int) FMT_FLAG_SCANF_A_KLUDGE)
 	{
 	  if (*format_chars == 'a' && !flag_isoc99)
 	    {
@@ -2043,7 +2044,8 @@
 
       format_char = *format_chars;
       if (format_char == 0
-	  || (!(fki->flags & FMT_FLAG_FANCY_PERCENT_OK) && format_char == '%'))
+	  || (!(fki->flags & (int) FMT_FLAG_FANCY_PERCENT_OK)
+	      && format_char == '%'))
 	{
 	  status_warning (status, "conversion lacks type at end of format");
 	  continue;
@@ -2109,7 +2111,7 @@
 	flag_chars[i - d] = 0;
       }
 
-      if ((fki->flags & FMT_FLAG_SCANF_A_KLUDGE)
+      if ((fki->flags & (int) FMT_FLAG_SCANF_A_KLUDGE)
 	  && strchr (flag_chars, 'a') != 0)
 	aflag = 1;
 
@@ -2190,7 +2192,7 @@
 
       wanted_type = 0;
       wanted_type_name = 0;
-      if (fki->flags & FMT_FLAG_ARG_CONVERT)
+      if (fki->flags & (int) FMT_FLAG_ARG_CONVERT)
 	{
 	  wanted_type = (fci->types[length_chars_val].type
 			 ? *fci->types[length_chars_val].type : 0);
--- function.c.orig	Fri Feb 16 17:17:29 2001
+++ function.c	Wed Feb 28 16:14:35 2001
@@ -2996,9 +2996,10 @@
      memory.  */
   if (code == SET)
     {
-      result = purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht);
-      result &= purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht);
-      return result;
+      if (purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht) == true
+	  && purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht) == true)
+	return true;
+      return false;
     }
 
   else if (code == ADDRESSOF && GET_CODE (XEXP (x, 0)) == MEM)
@@ -3230,9 +3231,10 @@
     }
   else if (code == SET)
     {
-      result = purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht);
-      result &= purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht);
-      return result;
+      if (purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht) == true
+	  && purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht) == true)
+	return true;
+      return false;
     }
 
   /* Scan all subexpressions.  */
@@ -3240,10 +3242,19 @@
   for (i = 0; i < GET_RTX_LENGTH (code); i++, fmt++)
     {
       if (*fmt == 'e')
-	result &= purge_addressof_1 (&XEXP (x, i), insn, force, 0, ht);
+	{
+	  if (result == true
+	      && purge_addressof_1 (&XEXP (x, i), insn, force, 0, ht) == false)
+	    result = false;
+	}
       else if (*fmt == 'E')
-	for (j = 0; j < XVECLEN (x, i); j++)
-	  result &= purge_addressof_1 (&XVECEXP (x, i, j), insn, force, 0, ht);
+	{
+	  for (j = 0; j < XVECLEN (x, i); j++)
+	    if (result == true
+		&& purge_addressof_1 (&XVECEXP (x, i, j), insn, force, 0, ht)
+		   == false)
+	      result = false;
+	}
     }
 
   return result;
--- expr.c.orig	Sun Feb  4 17:43:59 2001
+++ expr.c	Wed Feb 28 16:54:19 2001
@@ -2766,7 +2766,7 @@
   enum mode_class class = GET_MODE_CLASS (mode);
   unsigned int i;
 
-  if (mode >= MAX_MACHINE_MODE)
+  if ((unsigned int) mode >= (unsigned int) MAX_MACHINE_MODE)
     abort ();
 
   if (mov_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
@@ -5766,7 +5766,8 @@
 
       /* If this is a language-specific tree code, it may require
 	 special handling.  */
-      if (TREE_CODE (exp) >= LAST_AND_UNUSED_TREE_CODE
+      if ((unsigned int) TREE_CODE (exp)
+	  >= (unsigned int) LAST_AND_UNUSED_TREE_CODE
 	  && lang_safe_from_p
 	  && !(*lang_safe_from_p) (x, exp))
 	return 0;
--- varasm.c.orig	Sun Feb  4 03:29:46 2001
+++ varasm.c	Mon Feb 19 22:17:35 2001
@@ -2431,7 +2431,7 @@
       
     default:
       /* A language specific constant. Just hash the code. */
-      return code % MAX_HASH_TABLE;
+      return (int) code % MAX_HASH_TABLE;
     }
 
   /* Compute hashing function */
--- emit-rtl.c.orig	Sun Feb  4 17:43:58 2001
+++ emit-rtl.c	Tue Feb 20 00:09:00 2001
@@ -4139,9 +4139,9 @@
 	const_tiny_rtx[i][(int) mode] = GEN_INT (i);
     }
 
-  for (mode = CCmode; mode < MAX_MACHINE_MODE; ++mode)
-    if (GET_MODE_CLASS (mode) == MODE_CC)
-      const_tiny_rtx[0][(int) mode] = const0_rtx;
+  for (i = (int) CCmode; i < (int) MAX_MACHINE_MODE; ++i)
+    if (GET_MODE_CLASS ((enum machine_mode) i) == MODE_CC)
+      const_tiny_rtx[0][i] = const0_rtx;
 
   const_tiny_rtx[0][(int) BImode] = const0_rtx;
   if (STORE_FLAG_VALUE == 1)
--- regclass.c.orig	Mon Feb 19 16:49:40 2001
+++ regclass.c	Tue Feb 27 16:11:58 2001
@@ -430,7 +430,7 @@
     }
   memset (contains_reg_of_mode, 0, sizeof (contains_reg_of_mode));
   memset (allocatable_regs_of_mode, 0, sizeof (allocatable_regs_of_mode));
-  for (m = 0; m < MAX_MACHINE_MODE; m++)
+  for (m = 0; m < (unsigned int) MAX_MACHINE_MODE; m++)
     for (i = 0; i < N_REG_CLASSES; i++)
       if (CLASS_MAX_NREGS (i, m) <= reg_class_size[i])
 	for (j = 0; j < FIRST_PSEUDO_REGISTER; j++)
@@ -445,7 +445,7 @@
   /* Initialize the move cost table.  Find every subset of each class
      and take the maximum cost of moving any subset to any other.  */
 
-  for (m = 0; m < MAX_MACHINE_MODE; m++)
+  for (m = 0; m < (unsigned int) MAX_MACHINE_MODE; m++)
     if (allocatable_regs_of_mode [m])
       {
 	for (i = 0; i < N_REG_CLASSES; i++)
@@ -631,6 +631,7 @@
      unsigned int regno ATTRIBUTE_UNUSED;
      unsigned int nregs;
 {
+  unsigned int /* enum machine_mode */ m;
   enum machine_mode found_mode = VOIDmode, mode;
 
   /* We first look for the largest integer mode that can be validly
@@ -658,10 +659,13 @@
     return found_mode;
 
   /* Iterate over all of the CCmodes.  */
-  for (mode = CCmode; mode < NUM_MACHINE_MODES; ++mode)
-    if (HARD_REGNO_NREGS (regno, mode) == nregs
-        && HARD_REGNO_MODE_OK (regno, mode))
-    return mode;
+  for (m = (unsigned int) CCmode; m < (unsigned int) NUM_MACHINE_MODES; ++m)
+    {
+      mode = (enum machine_mode) m;
+      if (HARD_REGNO_NREGS (regno, mode) == nregs
+	  && HARD_REGNO_MODE_OK (regno, mode))
+	return mode;
+    }
 
   /* We can't find a mode valid for this register.  */
   return VOIDmode;
@@ -859,22 +863,23 @@
   int i;
   for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
     {
-      enum reg_class class;
+      int /* enum reg_class */ class;
       if (REG_N_REFS (i))
 	{
 	  fprintf (dump, "  Register %i costs:", i);
-	  for (class = 0; class < N_REG_CLASSES; class++)
-	    if (contains_reg_of_mode [class][PSEUDO_REGNO_MODE (i)]
+	  for (class = 0; class < (int) N_REG_CLASSES; class++)
+	    if (contains_reg_of_mode [(enum reg_class) class][PSEUDO_REGNO_MODE (i)]
 #ifdef FORBIDDEN_INC_DEC_CLASSES
-		&& (!in_inc_dec[i] || !forbidden_inc_dec_class[class])
+		&& (!in_inc_dec[i]
+		    || !forbidden_inc_dec_class[(enum reg_class) class])
 #endif
 #ifdef CLASS_CANNOT_CHANGE_MODE
 		&& (!REGNO_REG_SET_P (reg_changes_mode, i)
-		     || class_can_change_mode [class])
+		     || class_can_change_mode [(enum reg_class) class])
 #endif
 		)
-	    fprintf (dump, " %s:%i", reg_class_names[(int) class],
-		     costs[i].cost[class]);
+	    fprintf (dump, " %s:%i", reg_class_names[class],
+		     costs[i].cost[(enum reg_class) class]);
 	  fprintf (dump, " MEM:%i\n", costs[i].mem_cost);
 	}
     }
--- genrecog.c.orig	Sun Jan 14 15:35:06 2001
+++ genrecog.c	Tue Feb 20 14:34:17 2001
@@ -1432,7 +1432,7 @@
 	     how expensive/important the test is.  Given that the tests
 	     are also ordered within the list, examining the first is
 	     sufficient.  */
-	  if (add->tests->type < old->tests->type)
+	  if ((int) add->tests->type < (int) old->tests->type)
 	    insert_before = old;
 	}
 
--- rtl.h.orig	Sun Feb 18 23:52:53 2001
+++ rtl.h	Tue Feb 20 15:38:54 2001
@@ -184,11 +184,11 @@
 
 /* Define macros to access the `code' field of the rtx.  */
 
-#define GET_CODE(RTX)		((RTX)->code)
-#define PUT_CODE(RTX, CODE)	((RTX)->code = (CODE))
+#define GET_CODE(RTX)	    ((enum rtx_code) (RTX)->code)
+#define PUT_CODE(RTX, CODE) ((RTX)->code = (ENUM_BITFIELD(rtx_code)) (CODE))
 
-#define GET_MODE(RTX)		((RTX)->mode)
-#define PUT_MODE(RTX, MODE)	((RTX)->mode = (MODE))
+#define GET_MODE(RTX)	    ((enum machine_mode) (RTX)->mode)
+#define PUT_MODE(RTX, MODE) ((RTX)->mode = (ENUM_BITFIELD(machine_mode)) (MODE))
 
 #define RTX_INTEGRATED_P(RTX) ((RTX)->integrated)
 #define RTX_UNCHANGING_P(RTX) ((RTX)->unchanging)
@@ -702,7 +702,7 @@
 
 extern const char * const note_insn_name[NOTE_INSN_MAX - NOTE_INSN_BIAS];
 #define GET_NOTE_INSN_NAME(NOTE_CODE) \
-  (note_insn_name[(NOTE_CODE) - NOTE_INSN_BIAS])
+  (note_insn_name[(NOTE_CODE) - (int) NOTE_INSN_BIAS])
 
 /* The name of a label, in case it corresponds to an explicit label
    in the input source code.  */
--- tree.h.orig	Fri Feb 16 17:17:38 2001
+++ tree.h	Wed Feb 21 10:53:19 2001
@@ -274,7 +274,8 @@
 /* The tree-code says what kind of node it is.
    Codes are defined in tree.def.  */
 #define TREE_CODE(NODE) ((enum tree_code) (NODE)->common.code)
-#define TREE_SET_CODE(NODE, VALUE) ((NODE)->common.code = (int) (VALUE))
+#define TREE_SET_CODE(NODE, VALUE) \
+((NODE)->common.code = (ENUM_BITFIELD(tree_code)) (VALUE))
 
 /* When checking is enabled, errors will be generated if a tree node
    is accessed incorrectly. The macros abort with a fatal error.  */
--- simplify-rtx.c.orig	Tue Feb  6 07:39:15 2001
+++ simplify-rtx.c	Wed Feb 21 10:49:42 2001
@@ -2640,7 +2640,7 @@
 
     case CONST_INT:
       hash += ((unsigned) CONST_INT << 7) + (unsigned) mode + INTVAL (x);
-      return hash ? hash : CONST_INT;
+      return hash ? hash : (unsigned int) CONST_INT;
 
     case CONST_DOUBLE:
       /* This is like the general case, except that it only counts
@@ -2652,18 +2652,18 @@
       else
 	hash += ((unsigned) CONST_DOUBLE_LOW (x)
 		 + (unsigned) CONST_DOUBLE_HIGH (x));
-      return hash ? hash : CONST_DOUBLE;
+      return hash ? hash : (unsigned int) CONST_DOUBLE;
 
       /* Assume there is only one rtx object for any given label.  */
     case LABEL_REF:
       hash
 	+= ((unsigned) LABEL_REF << 7) + (unsigned long) XEXP (x, 0);
-      return hash ? hash : LABEL_REF;
+      return hash ? hash : (unsigned int) LABEL_REF;
 
     case SYMBOL_REF:
       hash
 	+= ((unsigned) SYMBOL_REF << 7) + (unsigned long) XSTR (x, 0);
-      return hash ? hash : SYMBOL_REF;
+      return hash ? hash : (unsigned int) SYMBOL_REF;
 
     case PRE_DEC:
     case PRE_INC:
@@ -2737,7 +2737,7 @@
 	abort ();
     }
 
-  return hash ? hash : 1 + GET_CODE (x);
+  return hash ? hash : 1 + (unsigned int) GET_CODE (x);
 }
 
 /* Create a new value structure for VALUE and initialize it.  The mode of the
--- timevar.c.orig	Wed Sep  6 03:02:40 2000
+++ timevar.c	Wed Feb 21 14:01:41 2001
@@ -401,7 +401,7 @@
 {
   /* Only print stuff if we have some sort of time information.  */
 #if defined (HAVE_USER_TIME) || defined (HAVE_SYS_TIME) || defined (HAVE_WALL_TIME)
-  timevar_id_t id;
+  unsigned int /* timevar_id_t */ id;
   struct timevar_time_def *total = &timevars[TV_TOTAL].elapsed;
   struct timevar_time_def now;
 
@@ -426,13 +426,13 @@
   start_time = now;
 
   fprintf (fp, _("\nExecution times (seconds)\n"));
-  for (id = 0; id < TIMEVAR_LAST; ++id)
+  for (id = 0; id < (unsigned int) TIMEVAR_LAST; ++id)
     {
-      struct timevar_def *tv = &timevars[id];
+      struct timevar_def *tv = &timevars[(timevar_id_t) id];
 
       /* Don't print the total execution time here; that goes at the
 	 end.  */
-      if (id == TV_TOTAL)
+      if ((timevar_id_t) id == TV_TOTAL)
 	continue;
 
       /* Don't print timing variables that were never used.  */
--- fixinc/fixincl.c.orig	Tue Feb  6 17:17:08 2001
+++ fixinc/fixincl.c	Wed Feb 21 15:47:24 2001
@@ -67,7 +67,7 @@
 te_verbose  verbose_level = VERB_PROGRESS;
 int have_tty = 0;
 
-#define VLEVEL(l)  (verbose_level >= l)
+#define VLEVEL(l)  ((unsigned int) verbose_level >= (unsigned int) l)
 #define NOT_SILENT VLEVEL(VERB_FIXES)
 
 pid_t process_chain_head = (pid_t) -1;
--- fixinc/fixlib.h.orig	Wed Dec 13 15:07:46 2000
+++ fixinc/fixlib.h	Wed Feb 21 17:54:05 2001
@@ -88,7 +88,7 @@
 
 #define IGNORE_ARG(a)   ((void)(a))
 
-typedef enum
+typedef enum boolean
 {
   BOOL_FALSE, BOOL_TRUE
 } t_bool;
--- fixinc/server.c.orig	Wed Feb 21 17:54:28 2001
+++ fixinc/server.c	Wed Feb 21 17:55:11 2001
@@ -57,7 +57,7 @@
 # define volatile
 #endif
 
-STATIC volatile t_bool read_pipe_timeout;
+STATIC volatile enum boolean read_pipe_timeout;
 STATIC pid_t server_master_pid = NOPROCESS;
 
 tSCC* def_args[] =
--- config/i386/i386.md.orig	Mon Feb 26 19:43:06 2001
+++ config/i386/i386.md	Tue Feb 27 18:46:45 2001
@@ -11784,7 +11784,7 @@
    operands[1] = gen_lowpart (SImode, operands[1]);
    if (GET_CODE (operands[3]) != ASHIFT)
      operands[2] = gen_lowpart (SImode, operands[2]);
-   GET_MODE (operands[3]) = SImode;")
+   PUT_MODE (operands[3], SImode);")
 
 (define_split
   [(set (reg 17)
--- toplev.c.orig	Wed Feb 21 18:19:38 2001
+++ toplev.c	Thu Mar  1 17:20:43 2001
@@ -2520,7 +2520,7 @@
     {
       int i;
 
-      for (i = 0; i < DFI_MAX; ++i)
+      for (i = 0; i < (int) DFI_MAX; ++i)
 	if (dump_file[i].initialized && dump_file[i].graph_dump_p)
 	  {
 	    char seq[16];
@@ -4014,7 +4014,7 @@
     switch (c = *arg++)
       {
       case 'a':
-	for (i = 0; i < DFI_MAX; ++i)
+	for (i = 0; i < (int) DFI_MAX; ++i)
 	  dump_file[i].enabled = 1;
 	break;
       case 'A':
@@ -4045,7 +4045,7 @@
 
       default:
 	matched = 0;
-	for (i = 0; i < DFI_MAX; ++i)
+	for (i = 0; i < (int) DFI_MAX; ++i)
 	  if (c == dump_file[i].debug_switch)
 	    {
 	      dump_file[i].enabled = 1;

Re: Enum related fixes for gcc build with native cc on vax ultrix

[Richard Henderson]

On Thu, Mar 01, 2001 at 08:31:12PM -0500, John David Anglin wrote:
> -	      if (i == RID_LONG && specbits & (1<<i))
> +	      if (i == RID_LONG && specbits & (1 << (int) i))

Parenthesis error around "&" vs "&&".  It was broken before, but...

> -      result = purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht);
> -      result &= purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht);
> -      return result;
> +      if (purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht) == true
> +	  && purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht) == true)
> +	return true;
> +      return false;

Eh?  Perhaps this gets fixed with Zack's boolean cleanup patch.

> -typedef enum
> +typedef enum boolean

Wait for Zack's commit to kill this.

Otherwise it's ok.


r~

Re: Enum related fixes for gcc build with native cc on vax ultrix

[John David Anglin]

> > -      result = purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht);
> > -      result &= purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht);
> > -      return result;
> > +      if (purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht) == true
> > +	  && purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht) == true)
> > +	return true;
> > +      return false;
> 
> Eh?  Perhaps this gets fixed with Zack's boolean cleanup patch.

Yes, I believe that this is fixed in the main but not the branch.  Zack
is not going to patch the branch.  If the `Eh' applies to the code, I
believe that the code rework is correct to the best of my knowledge
given my understanding of the constant representations for the enums
true and false (see hash.h) but I could be wrong.

> > -typedef enum
> > +typedef enum boolean
> 
> Wait for Zack's commit to kill this.

Zack's commit didn't kill this and he doesn't want to touch it, so I
have copied Bruce Korb.

So, this is what remains to be approved to get vax ultrix bootstrapping
again with the native compiler:

1) For the 3.0 branch,

2001-02-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* function.c (purge_addressof_1): Revise to avoid using &= with enum
	result.

--- function.c.orig	Fri Feb 16 17:17:29 2001
+++ function.c	Wed Feb 28 16:14:35 2001
@@ -2996,9 +2996,10 @@
      memory.  */
   if (code == SET)
     {
-      result = purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht);
-      result &= purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht);
-      return result;
+      if (purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht) == true
+	  && purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht) == true)
+	return true;
+      return false;
     }
 
   else if (code == ADDRESSOF && GET_CODE (XEXP (x, 0)) == MEM)
@@ -3230,9 +3231,10 @@
     }
   else if (code == SET)
     {
-      result = purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht);
-      result &= purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht);
-      return result;
+      if (purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht) == true
+	  && purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht) == true)
+	return true;
+      return false;
     }
 
   /* Scan all subexpressions.  */
@@ -3240,10 +3242,19 @@
   for (i = 0; i < GET_RTX_LENGTH (code); i++, fmt++)
     {
       if (*fmt == 'e')
-	result &= purge_addressof_1 (&XEXP (x, i), insn, force, 0, ht);
+	{
+	  if (result == true
+	      && purge_addressof_1 (&XEXP (x, i), insn, force, 0, ht) == false)
+	    result = false;
+	}
       else if (*fmt == 'E')
-	for (j = 0; j < XVECLEN (x, i); j++)
-	  result &= purge_addressof_1 (&XVECEXP (x, i, j), insn, force, 0, ht);
+	{
+	  for (j = 0; j < XVECLEN (x, i); j++)
+	    if (result == true
+		&& purge_addressof_1 (&XVECEXP (x, i, j), insn, force, 0, ht)
+		   == false)
+	      result = false;
+	}
     }
 
   return result;

2) For the main and the branch,

2001-02-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* fixinc/fixlib.h (bool_t): Add identifier `boolean' in typedef.
	* fixinc/server.c (read_pipe_timeout): Use enum boolean instead of
	bool_t in declaration because pcc can't combine volatile with typedef
	types.

--- fixinc/fixlib.h.orig	Wed Dec 13 15:07:46 2000
+++ fixinc/fixlib.h	Wed Feb 21 17:54:05 2001
@@ -88,7 +88,7 @@
 
 #define IGNORE_ARG(a)   ((void)(a))
 
-typedef enum
+typedef enum boolean
 {
   BOOL_FALSE, BOOL_TRUE
 } t_bool;
--- fixinc/server.c.orig	Wed Feb 21 17:54:28 2001
+++ fixinc/server.c	Wed Feb 21 17:55:11 2001
@@ -57,7 +57,7 @@
 # define volatile
 #endif
 
-STATIC volatile t_bool read_pipe_timeout;
+STATIC volatile enum boolean read_pipe_timeout;
 STATIC pid_t server_master_pid = NOPROCESS;
 
 tSCC* def_args[] =

3) The trivial fix to cplus-dem.c in libiberty for the main and branch,

2001-02-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* cplus-dem.c (main): Cast enum style to int.

--- cplus-dem.c.orig	Sun Feb 18 14:06:37 2001
+++ cplus-dem.c	Wed Feb 21 21:38:12 2001
@@ -5148,7 +5148,7 @@
 		skip_first = i;
 
 	      mbuffer[i] = 0;
-	      flags |= style;
+	      flags |= (int) style;
 	      result = cplus_demangle (mbuffer + skip_first, flags);
 	      if (result)
 		{

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Enum related fixes for gcc build with native cc on vax ultrix

[John David Anglin]

> > -      result = purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht);
> > -      result &= purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht);
> > -      return result;
> > +      if (purge_addressof_1 (&SET_DEST (x), insn, force, 1, ht) == true
> > +	  && purge_addressof_1 (&SET_SRC (x), insn, force, 0, ht) == true)
> > +	return true;
> > +      return false;
> 
> Eh?  Perhaps this gets fixed with Zack's boolean cleanup patch.

On thinking more about the patch to function.c, this fix is less invasive.
Bootstrap checked under i686 linux with no regressions.  OK for the 3.0
branch?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-03-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* function.c (purge_addressof_1): Change type of function
	purge_addressof_1 from boolean to int.  Change local variable
	`result' to int, and false and true to 0 and 1, respectively.

--- function.c.orig	Sat Mar  3 14:06:57 2001
+++ function.c	Sun Mar  4 12:03:57 2001
@@ -294,8 +294,8 @@
 static void emit_return_into_block PARAMS ((basic_block, rtx));
 #endif
 static void put_addressof_into_stack PARAMS ((rtx, struct hash_table *));
-static boolean purge_addressof_1 PARAMS ((rtx *, rtx, int, int,
-					  struct hash_table *));
+static int purge_addressof_1 PARAMS ((rtx *, rtx, int, int,
+				      struct hash_table *));
 static void purge_single_hard_subreg_set PARAMS ((rtx));
 #ifdef HAVE_epilogue
 static void keep_stack_depressed PARAMS ((rtx));
@@ -2969,7 +2969,7 @@
    the stack.  If the function returns FALSE then the replacement could not
    be made.  */
 
-static boolean
+static /* boolean */ int
 purge_addressof_1 (loc, insn, force, store, ht)
      rtx *loc;
      rtx insn;
@@ -2980,14 +2980,14 @@
   RTX_CODE code;
   int i, j;
   const char *fmt;
-  boolean result = true;
+  int /*boolean */ result = /* true */ 1;
 
   /* Re-start here to avoid recursion in common cases.  */
  restart:
 
   x = *loc;
   if (x == 0)
-    return true;
+    return 1;
 
   code = GET_CODE (x);
 
@@ -3010,7 +3010,7 @@
 
       if (validate_change (insn, loc, sub, 0)
 	  || validate_replace_rtx (x, sub, insn))
-	return true;
+	return 1;
 
       start_sequence ();
       sub = force_operand (sub, NULL_RTX);
@@ -3021,7 +3021,7 @@
       insns = gen_sequence ();
       end_sequence ();
       emit_insn_before (insns, insn);
-      return true;
+      return 1;
     }
 
   else if (code == MEM && GET_CODE (XEXP (x, 0)) == ADDRESSOF && ! force)
@@ -3055,7 +3055,7 @@
 		if (rtx_equal_p (x, XEXP (tem, 0)))
 		  {
 		    *loc = XEXP (XEXP (tem, 1), 0);
-		    return true;
+		    return 1;
 		  }
 
 	      /* See comment for purge_addressof_replacements.  */
@@ -3095,7 +3095,7 @@
 		      z = gen_lowpart (GET_MODE (x), z);
 
 		    *loc = z;
-		    return true;
+		    return 1;
 		  }
 
 	      /* Sometimes we may not be able to find the replacement.  For
@@ -3105,7 +3105,7 @@
 		 generate an example of this siutation.  Rather than complain
 		 we return false, which will prompt our caller to remove the
 		 offending note.  */
-	      return false;
+	      return /* false */ 0;
 	    }
 
 	  size_x = GET_MODE_BITSIZE (GET_MODE (x));
@@ -3191,7 +3191,7 @@
 				      purge_bitfield_addressof_replacements));
 
 	      /* We replaced with a reg -- all done.  */
-	      return true;
+	      return 1;
 	    }
 	}
 
@@ -3209,13 +3209,13 @@
 		if (rtx_equal_p (XEXP (x, 0), XEXP (tem, 0)))
 		  {
 		    XEXP (XEXP (tem, 1), 0) = sub;
-		    return true;
+		    return 1;
 		  }
 	      purge_addressof_replacements
 		= gen_rtx (EXPR_LIST, VOIDmode, XEXP (x, 0),
 			   gen_rtx_EXPR_LIST (VOIDmode, sub,
 					      purge_addressof_replacements));
-	      return true;
+	      return 1;
 	    }
 	  goto restart;
 	}
@@ -3226,7 +3226,7 @@
   else if (code == ADDRESSOF)
     {
       put_addressof_into_stack (x, ht);
-      return true;
+      return 1;
     }
   else if (code == SET)
     {

Re: Enum related fixes for gcc build with native cc on vax ultrix

[Richard Henderson]

On Sun, Mar 04, 2001 at 01:28:31PM -0500, John David Anglin wrote:
> 	* function.c (purge_addressof_1): Change type of function
> 	purge_addressof_1 from boolean to int.  Change local variable
> 	`result' to int, and false and true to 0 and 1, respectively.

This is ok.


r~

Re: cpplib: basename () fix

[John David Anglin]

> Remember the lengthy discussion about basename variants.  This wouldn't
> have happened with my libiberty basename patch.  I thought it had been
> submitted but ...

On further looking, I see that I did in fact send the patch:
< http://gcc.gnu.org/ml/gcc-patches/2001-02/msg01548.html >.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Enum fix to cplus-dem.c for gcc build with native cc on vax ultrix

[John David Anglin]

This is the last of the enum fixes for the ultrix native compiler.  I am
going to checkin under the obvious rule.

> 
> Please review.
> 
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)
> 
> 2001-02-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* cplus-dem.c (main): Cast enum style to int.
> 
> --- cplus-dem.c.orig	Sun Feb 18 14:06:37 2001
> +++ cplus-dem.c	Wed Feb 21 21:38:12 2001
> @@ -5148,7 +5148,7 @@
>  		skip_first = i;
>  
>  	      mbuffer[i] = 0;
> -	      flags |= style;
> +	      flags |= (int) style;
>  	      result = cplus_demangle (mbuffer + skip_first, flags);
>  	      if (result)
>  		{
> 

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: cpplib: basename () fix

[John David Anglin]

> I just noticed that Zack in "x-files must die: alloca" has revamped the
> handling of alloca.  I want to look carefully at what he has done.  See
> < http://gcc.gnu.org/ml/gcc-patches/2001-03/msg00194.html >.  Possibly, we

In looking at this patch, I see that Zack uses AC_TRY_RUN to determine
the stack direction for C alloca in libiberty_AC_FUNC_C_ALLOCA.  The test
runs at exactly the same spot that I wanted to put the basename functionality
check.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: cpplib: basename () fix

[DJ Delorie]

> In looking at this patch, I see that Zack uses AC_TRY_RUN to determine
> the stack direction for C alloca in libiberty_AC_FUNC_C_ALLOCA.  The test
> runs at exactly the same spot that I wanted to put the basename functionality
> check.

Hmmm, that would break too then.  Zack?

Re: cpplib: basename () fix

[Zack Weinberg]

On Tue, Mar 06, 2001 at 01:07:12PM -0500, John David Anglin wrote:
> > I just noticed that Zack in "x-files must die: alloca" has revamped the
> > handling of alloca.  I want to look carefully at what he has done.  See
> > < http://gcc.gnu.org/ml/gcc-patches/2001-03/msg00194.html >.  Possibly, we
> 
> In looking at this patch, I see that Zack uses AC_TRY_RUN to determine
> the stack direction for C alloca in libiberty_AC_FUNC_C_ALLOCA.  The test
> runs at exactly the same spot that I wanted to put the basename functionality
> check.

The AC_TRY_RUN in the alloca logic has a fallback in the case we're
cross compiling (it postpones the test to run time).

zw

Re: cpplib: basename () fix

[John David Anglin]

> On Tue, Mar 06, 2001 at 01:07:12PM -0500, John David Anglin wrote:
> > > I just noticed that Zack in "x-files must die: alloca" has revamped the
> > > handling of alloca.  I want to look carefully at what he has done.  See
> > > < http://gcc.gnu.org/ml/gcc-patches/2001-03/msg00194.html >.  Possibly, we
> > 
> > In looking at this patch, I see that Zack uses AC_TRY_RUN to determine
> > the stack direction for C alloca in libiberty_AC_FUNC_C_ALLOCA.  The test
> > runs at exactly the same spot that I wanted to put the basename functionality
> > check.
> 
> The AC_TRY_RUN in the alloca logic has a fallback in the case we're
> cross compiling (it postpones the test to run time).

In the basename case, we don't need a fallback because we just use the
libiberty version when cross compiling (ie., test fails) unless the
runtime environment explicitly excludes it from the list of funcs to
check.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: cpplib: basename () fix

[DJ Delorie]

> In the basename case, we don't need a fallback because we just use the
> libiberty version when cross compiling (ie., test fails) unless the
> runtime environment explicitly excludes it from the list of funcs to
> check.

And I say again, we might as well just always build and include our
own basename then.  Alloca is different in that, even when we build
our own, it must know something about the runtime environment just to
function properly.  However, it is equipped to defer that test until
runtime.  We can't defer linking basename or not until after runtime.

Re: Patch for wrong number of arguments in call to smallest_mode_for_size.

[John David Anglin]

> This patch may fix a bootstrap failure compiling under hpux 10.20 with
> the 3.0 branch and todays source.  There is another more serious problem

Wrong branch.  It should be 3.1.

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Patch to rtx_varies_p to improve pic code on PA

[John David Anglin]

> 2001-03-09  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* explow.c (stabilize): Call rtx_varies_p instead of rtx_unstable_p.
> 	* regmove.c (stable_and_no_regs_but_for_p): Likewise.
> 	* rtlanal.c (rtx_varies_p): Treat an unchanging register operand as
> 	constant for alias analysis.  Treat the pic offset table register as
> 	constant even when PIC_OFFSET_TABLE_REG_CALL_CLOBBERED is defined.
> 	Update comments.

In looking at test results with and without this patch, I see that that the
patch does in fact eliminate at least one failing test case under i686
linux.  For example, compare these results:
< http://gcc.gnu.org/ml/gcc-testresults/2001-03/msg00243.html >
and
< http://gcc.gnu.org/ml/gcc-testresults/2001-03/msg00245.html >.

I don't see any failures of 20001226-1.c with the patch installed.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: f/ansify.c uses ANSI features

[John David Anglin]

> I have enclosed an untested patch for discussion/review.

This is better.  It squelches a couple of warnings when compiled with
`-Wstrict-prototypes -Wmissing-prototypes'.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-04-05  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* ansify.c (die_unless): Provide definition suitable for cpp that
	doesn't have ANSI # stringizing operator.
	(die, main): Prototype and don't use ANSI declaration style.

--- ansify.c.orig	Tue Aug 29 17:39:48 2000
+++ ansify.c	Thu Apr  5 16:30:43 2001
@@ -22,6 +22,7 @@
 #include "hconfig.h"
 #include "system.h"
 
+#ifdef HAVE_STRINGIZE
 #define die_unless(c) \
   do if (!(c)) \
     { \
@@ -29,15 +30,30 @@
       die (); \
     } \
   while(0)
+#else
+#define die_unless(c) \
+  do if (!(c)) \
+    { \
+      fprintf (stderr, "%s:%lu: %s\n", argv[1], lineno, "c"); \
+      die (); \
+    } \
+  while(0)
+#endif
+
+static void ATTRIBUTE_NORETURN die PARAMS ((void));
 
 static void ATTRIBUTE_NORETURN
-die (void)
+die ()
 {
   exit (1);
 }
 
+extern int main PARAMS ((int, const char *const *));
+
 int
-main(int argc, char **argv)
+main (argc, argv)
+     int argc;
+     const char *const *argv;
 {
   int c;
   static unsigned long lineno = 1;

Re: Sign extension of type with precision of 0 causes fault in force_fit_type

[John David Anglin]

> 
> The following error occured in my latest build under vax ultrix:
> 
> /xxx/gnu/gcc-3.0/objdir/gcc/xgcc -B/xxx/gnu/gcc-3.0/objdir/gcc/ -nostdinc++ -L/xxx/gnu/gcc-3.0/objdir/vax-dec-ultrix4.3/libstdc++-v3/src -L/xxx/gnu/gcc-3.0/objdir/vax-dec-ultrix4.3/libstdc++-v3/src/.libs -B/usr/local/vax-dec-ultrix4.3/bin/ -B/usr/local/vax-dec-ultrix4.3/lib/ -isystem /usr/local/vax-dec-ultrix4.3/include -nostdinc++ -I../../../../libstdc++-v3/include -I../../../../libstdc++-v3/include/std -I../../../../libstdc++-v3/include/c_std -I../include -I../../../../libstdc++-v3/libsupc++ -I../libio -I../../../../libstdc++-v3/libio -I../../../../libstdc++-v3/libmath -g -O2 -fno-implicit-templates -Wall -Wno-format -W -Wwrite-strings -Winline -fdiagnostics-show-location=once -g -c limitsMEMBERS.cc -o limitsMEMBERS.o
> In file included from limitsMEMBERS.cc:37:
> ../include/bits/std_limits.h:56: Internal error: Illegal instruction

Here is a patch for review to fix the above problem.  The problem
arises because the initial type of each value is changed to enumtype
prior to min_precision being called.  The precision of enumtype is
zero at that point.  The call to min_precision requires that the
precision for the value be set correctly if the value is negative.

I have revised the code so that the calls to min_precision now
occur before the type of value is changed.  I have checked that
it resolves the internal error on the vax and done a complete
bootstrap check with no regressions under i686 linux.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-04-12  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* cp/decl.c (finish_enum): Revise calculation of precision needed
	for enumeration types.

--- decl.c.orig	Thu Apr 12 12:35:11 2001
+++ decl.c	Thu Apr 12 17:02:07 2001
@@ -12923,8 +12923,11 @@
 finish_enum (enumtype)
      tree enumtype;
 {
-  register tree minnode = NULL_TREE, maxnode = NULL_TREE;
-  /* Calculate the maximum value of any enumerator in this type.  */
+  unsigned int precision = 1;
+  int unsignedp = 1;
+
+  /* Calculate the maximum precision needed for any enumerator in
+     this type assuming the values are unsigned.  */
 
   tree values = TYPE_VALUES (enumtype);
   if (values)
@@ -12954,6 +12957,11 @@
 	  value = DECL_INITIAL (decl);
 	  if (value && !processing_template_decl)
 	    {
+	      precision = MAX (precision, min_precision (value, 1));
+
+	      if (unsignedp && tree_int_cst_sgn (value) < 0)
+		unsignedp = 0;
+
 	      /* Set the TREE_TYPE for the VALUE as well.  That's so
 		 that when we call decl_constant_value we get an
 		 entity of the right type (but with the constant
@@ -12962,18 +12970,8 @@
 		 reason to do that when processing_template_decl.
 		 And, if the expression is something like a
 		 TEMPLATE_PARM_INDEX or a CAST_EXPR doing so will
-		 wreak havoc on the intended type of the expression.
-
-	         Of course, there's also no point in trying to compute
-		 minimum or maximum values if we're in a template.  */
+		 wreak havoc on the intended type of the expression.  */
 	      TREE_TYPE (value) = enumtype;
-
-	      if (!minnode)
-		minnode = maxnode = value;
-	      else if (tree_int_cst_lt (maxnode, value))
-		maxnode = value;
-	      else if (tree_int_cst_lt (value, minnode))
-		minnode = value;
 	    }
 
 	  if (processing_template_decl)
@@ -12987,8 +12985,6 @@
 	    TREE_VALUE (pair) = value;
 	}
     }
-  else
-    maxnode = minnode = integer_zero_node;
 
   TYPE_VALUES (enumtype) = nreverse (values);
 
@@ -13000,11 +12996,11 @@
     }
   else
     {
-      int unsignedp = tree_int_cst_sgn (minnode) >= 0;
-      int lowprec = min_precision (minnode, unsignedp);
-      int highprec = min_precision (maxnode, unsignedp);
-      int precision = MAX (lowprec, highprec);
       tree tem;
+
+      if (!unsignedp)
+	/* Need signed type with one bit more.  */
+	precision += 1;
 
       TYPE_SIZE (enumtype) = NULL_TREE;
 

Re: Where's the axe? Can't walk_tree.

[John David Anglin]

I have enclosed a patch for review.  It has been bootstrap tested under
i686 linux with PCC_STATIC_STRUCT_RETURN defined in linux.h.  The build
of libstdc++-v3 under vax ultrix goes much further than ever before
but there are still problems:

/xxx/gnu/gcc-3.0/objdir/gcc/xgcc -B/xxx/gnu/gcc-3.0/objdir/gcc/ -nostdinc++ -L/xxx/gnu/gcc-3.0/objdir/vax-dec-ultrix4.3/libstdc++-v3/src -L/xxx/gnu/gcc-3.0/objdir/vax-dec-ultrix4.3/libstdc++-v3/src/.libs -B/usr/local/vax-dec-ultrix4.3/bin/ -B/usr/local/vax-dec-ultrix4.3/lib/ -isystem /usr/local/vax-dec-ultrix4.3/include -nostdinc++ -I../../../../libstdc++-v3/include -I../../../../libstdc++-v3/include/std -I../../../../libstdc++-v3/include/c_std -I../include -I../../../../libstdc++-v3/libsupc++ -I../libio -I../../../../libstdc++-v3/libio -I../../../../libstdc++-v3/libmath -g -O2 -fno-implicit-templates -Wall -Wno-format -W -Wwrite-strings -Winline -fdiagnostics-show-location=once -g -c ../../../../libstdc++-v3/src/misc-inst.cc -o misc-inst.o
../../../../libstdc++-v3/include/bits/basic_string.h: In function
   `std::basic_istream<_CharT, _Traits>&
   std::operator>>(std::basic_istream<_CharT, _Traits>&,
   std::basic_string<_CharT, _Traits, _Alloc>&) [with _CharT = char, _Traits =
   std::char_traits<char>, _Alloc = std::allocator<char>]':
../../../../libstdc++-v3/src/misc-inst.cc:189:   instantiated from here
../../../../libstdc++-v3/include/bits/basic_string.h:1133: warning: comparison
   between signed and unsigned integer expressions
/usr/tmp/ccsCMPtL.s: Assembler messages:
/usr/tmp/ccsCMPtL.s:45114: Error: Attempt to get value of unresolved symbol __n:V28
/usr/tmp/ccsCMPtL.s:45114: Error: Attempt to get value of unresolved symbol __n:
V28
/usr/tmp/ccsCMPtL.s:45114: Error: Attempt to get value of unresolved symbol
/usr/tmp/ccsCMPtL.s:45114: Error: Attempt to get value of unresolved symbol
make[4]: *** [misc-inst.lo] Error 1

The problem causing the infinite recursion was the call to build_aggr_init
in simplify_aggr_init_exprs_r.  It converted the just built call_expr back
to an expression containing another aggr_init_expr.

> 
> The following error occurs compiling cinst.cc under vax ultrix 4.3:
> 
> /xxx/gnu/gcc-2.97/objdir/gcc/g++ -B/xxx/gnu/gcc-2.97/objdir/gcc/ -nostdinc++ -isystem /xxx/gnu/gcc-2.97/libstdc++ -isystem /xxx/gnu/gcc-2.97/libstdc++/std -isystem /xxx/gnu/gcc-2.97/libstdc++/stl -isystem /xxx/gnu/gcc-2.97/libio -isystem /xxx/gnu/gcc-2.97/objdir/vax-dec-ultrix4.3/libio -L/xxx/gnu/gcc-2.97/objdir/vax-dec-ultrix4.3/libstdc++ -B/usr/local/vax-dec-ultrix4.3/bin/ -B/usr/local/vax-dec-ultrix4.3/lib/ -isystem /usr/local/vax-dec-ultrix4.3/include -c -O3 -fno-implicit-templates -I../../../libstdc++ -I../../../libstdc++/stl -I../libio -I../../../libstdc++/../libio -I../../../libstdc++/../include -I../../../libstdc++/../gcc -nostdinc++  -DF `for N in MAIN ADDCC ADDCF ADDFC SUBCC SUBCF SUBFC MULCC MULCF MULFC DIVCC DIVCF DIVFC PLUS MINUS EQCC EQCF EQFC NECC NECF NEFC ABS ARG POLAR CONJ NORM COS COSH EXP LOG POWCC POWCF POWCI POWFC SIN SINH SQRT; do echo " -D${N}"; done` \
>   ../../../libstdc++/cinst.cc -o fcomplex.o
> ../libio/_G_config.h:85: warning: badly nested C headers from preprocessor
> ../../../libstdc++/cmath:6: warning: badly nested C headers from preprocessor
> g++: Internal error: Illegal instruction (program cc1plus)
> Please submit a full bug report.
> See <URL: http://www.gnu.org/software/gcc/bugs.html > for instructions.
> make[1]: *** [bigstmp-complx] Error 1
> make[1]: Leaving directory `/xxx/gnu/gcc-2.97/objdir/vax-dec-ultrix4.3/libstdc++'
> make: *** [all-target-libstdc++] Error 2
> Wed Nov 29 07:51:59 EST 2000
> 
> The internal error is caused by cc1plus exceeding the maximum stack size.
> It occurs processing the header fcomplex.h for the function
> const complex<float> operator+(const complex<float>&, float).  For some
> reason, the recursive calls to walk the tree lead to infinite recursion:
> 
> (gdb) bt -10
> #18906 0xe9d66 in walk_tree (tp=0x3ffbd4, 
>     func=0xe40ac <simplify_aggr_init_exprs_r>, data=0x0, 
>     htab=0x308700, 3180288, 1) at ../../gcc/cp/tree.c:1286
> #18907 0xe9d66 in walk_tree (tp=0x3ffbf0, 
>     func=0xe40ac <simplify_aggr_init_exprs_r>, data=0x0, htab=0x308700)
>     at ../../gcc/cp/tree.c:1286
> #18908 0xe9d66 in walk_tree (tp=0x3fd160, 
>     func=0xe40ac <simplify_aggr_init_exprs_r>, data=0x0, htab=0x308700)
>     at ../../gcc/cp/tree.c:1286
> #18909 0xe9da3 in walk_tree (tp=0x3fd150, 
>     func=0xe40ac <simplify_aggr_init_exprs_r>, data=0x0, htab=0x308700)
>     at ../../gcc/cp/tree.c:1307
> #18910 0xe9d66 in walk_tree (tp=0x3dbb80, 
>     func=0xe40ac <simplify_aggr_init_exprs_r>, data=0x0, htab=0x308700)
>     at ../../gcc/cp/tree.c:1286
> #18911 0xed91c in walk_tree_without_duplicates (tp=0x3dbb80, 
>     func=0xe40ac <simplify_aggr_init_exprs_r>, data=0x0)
>     at ../../gcc/cp/tree.c:1444
> #18912 0xe4559 in expand_body (fn=0x3e0000, 4063232)
>     at ../../gcc/cp/semantics.c:2332
> #18913 0xa1c60 in yyparse () at /usr/local/share/bison.simple:2162
> #18914 0x11b41e in compile_file (name=0x7fffc1cd "fcomplex.ii")
>     at ../../gcc/toplev.c:2361
> #18915 0x120802 in main (argc=4, argv=0x7fffc0c0, 2147467476)
>     at ../../gcc/toplev.c:4843
> 
> (gdb) frame 18911
> #18911 0xed91c in walk_tree_without_duplicates (tp=0x3dbb80, 
>     func=0xe40ac <simplify_aggr_init_exprs_r>, data=0x0)
>     at ../../gcc/cp/tree.c:1444
> 1444      result = walk_tree (tp, func, data, htab);
> (gdb) p debug_tree (*tp)
>  <compound_stmt 003fd140 tree_1 tree_2
>     arg 0 <scope_stmt 003fd160 tree_0 tree_1
>         chain <return_stmt 003ffbe0 tree_1
>             arg 0 <init_expr 003ffbc0 type <record_type 00344800 complex<float>>
>                  side-effects arg 0 <result_decl 003fc380>
>                  arg 1 <target_expr 003ff940 type <record_type 00344800 complex<float>>
>                      side-effects addressable arg 0 <var_decl 00400000>
>                      arg 1 <compound_expr 00400bc0 type <record_type 00344800 complex<float>>
>                          side-effects
> 			 arg 0 <stmt_expr 00400ba0 type <record_type 00344800 complex<float>>
>                              side-effects used arg 0 <compound_stmt 004008a0>> arg 1 <var_decl 00400000>>>>
>             chain <scope_stmt 00400800 tree_1>>>>
> $3 = void
> 
> At frame #5, we have
> 
> (gdb) frame 5
> #5  0xe97ca in walk_tree (tp=0xa52854, 
>     func=0xe40ac <simplify_aggr_init_exprs_r>, data=0x0, htab=0x308700)
>     at ../../gcc/cp/tree.c:1251
> 1251      result = (*func) (tp, &walk_subtrees, data);
> (gdb) p debug_tree (*tp)
>  <aggr_init_expr 00a52820
>     type <record_type 00344800 complex<float> needs-constructing type_1 type_5 DI
>         size <integer_cst 002d2c00 constant 64>
>         unit size <integer_cst 002d2c20 constant 8>
>         align 32 symtab 0 alias set -1
>         fields <field_decl 003db380 re type <real_type 002d4600 float>
>             private nonlocal decl_3 SF file ../../../libstdc++/std/fcomplex.h line 51
>             size <integer_cst 002d2c40 constant 32>
>             unit size <integer_cst 002d2c80 constant 4>
>             align 32 offset_align 32
>             offset <integer_cst 002d2ea0 constant 0>
>             bit offset <integer_cst 002d2ec0 constant 0> context <record_type 00344800 complex<float>> arguments <integer_cst 002d2ea0 0> chain <field_decl 003dc800 im>>
>        needs-constructor X() X(constX&) this=(X&) n_parents 0 use_template=2 vtable-needs-writing
>         member-functions <tree_vec 003e9380
>              elt 0 <overload 003cc370>
>              elt 2 <function_decl 003e9280 operator=>
>              elt 3 <function_decl 003d8900 operator+=>
>              elt 4 <function_decl 003d8b80 operator-=>
>              elt 5 <function_decl 003d9a00 operator*=>
>              elt 6 <function_decl 003da880 operator/=>
>              elt 7 <function_decl 003daa80 real>
>              elt 8 <function_decl 003db200 imag>>
>         pointer_to_this <pointer_type 00344880> reference_to_this <reference_type 003d7a00> chain <type_decl 00344900 complex<float>>>
>     side-effects
>     arg 0 <addr_expr 003ff8e0
> 	type <pointer_type 003feb80 type <function_type 003df380>
>             unsigned SI size <integer_cst 002d2c40 32> unit size <integer_cst 002d2c80 4>
>             align 32 symtab 0 alias set -1>
>         readonly
>         arg 0 <function_decl 003fea00 operator+ type <function_type 003df380>
>             readonly used public external inline QI file ../../../libstdc++/std/complext.h line 160
>             frame_size 0 arguments <parm_decl 003fea80 x> initial <block 0036c920>
>             template-info 003ff0e0
>             (mem:QI (symbol_ref:SI ("__pl__H1Zf_RCt7complex1ZX01X01_t7complex1ZX01")) 0)>>
>     arg 1 <tree_list 003ff280
>         value <nop_expr 003ff260 type <reference_type 003d7b00>
>             readonly
>             arg 0 <convert_expr 003ff240 type <pointer_type 003dab80>
>                 readonly arg 0 <parm_decl 003df280 x>>>
>         chain <tree_list 003ff2a0 value <parm_decl 003df300 y>>>
>     arg 2 <var_decl 00a4fb00 type <record_type 00344800 complex<float>>
>         used DI file ../../../libstdc++/std/fcomplex.h line 60 size <integer_cst 002d2c00 64> unit size <integer_cst 002d2c20 8>
>         align 32>>
> $4 = void
> 
> Debugging this is a real maize.  Let me know if anyone has any clues or
> suggestions.
> 

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-04-13  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* semantics.c (simplify_aggr_init_exprs_r): Add DIRECT_BIND to flags
	in call to build_aggr_init to prevent conversion of CALL_EXPR back
	to a AGGR_INIT_EXPR.  This prevents infinite recursion when
	PCC_STATIC_STRUCT_RETURN is defined.  Save flag_access_control
	across call to build_aggr_init.

--- semantics.c.orig	Thu Apr 12 12:35:13 2001
+++ semantics.c	Fri Apr 13 21:27:06 2001
@@ -2237,10 +2237,11 @@
 #ifdef PCC_STATIC_STRUCT_RETURN  
   if (!AGGR_INIT_VIA_CTOR_P (aggr_init_expr) && aggregate_value_p (type))
     {
-      int old_ac;
+      int old_ac = flag_access_control;
 
       flag_access_control = 0;
-      call_expr = build_aggr_init (slot, call_expr, LOOKUP_ONLYCONVERTING);
+      call_expr = build_aggr_init (slot, call_expr,
+				   DIRECT_BIND | LOOKUP_ONLYCONVERTING);
       flag_access_control = old_ac;
       copy_from_buffer_p = 1;
     }

.stabs statements refer to symbol not in source

[John David Anglin]

This is a follow up to the following problem:

> /xxx/gnu/gcc-3.0/objdir/gcc/xgcc -B/xxx/gnu/gcc-3.0/objdir/gcc/ -nostdinc++ -L/xxx/gnu/gcc-3.0/objdir/vax-dec-ultrix4.3/libstdc++-v3/src -L/xxx/gnu/gcc-3.0/objdir/vax-dec-ultrix4.3/libstdc++-v3/src/.libs -B/usr/local/vax-dec-ultrix4.3/bin/ -B/usr/local/vax-dec-ultrix4.3/lib/ -isystem /usr/local/vax-dec-ultrix4.3/include -nostdinc++ -I../../../../libstdc++-v3/include -I../../../../libstdc++-v3/include/std -I../../../../libstdc++-v3/include/c_std -I../include -I../../../../libstdc++-v3/libsupc++ -I../libio -I../../../../libstdc++-v3/libio -I../../../../libstdc++-v3/libmath -g -O2 -fno-implicit-templates -Wall -Wno-format -W -Wwrite-strings -Winline -fdiagnostics-show-location=once -g -c ../../../../libstdc++-v3/src/misc-inst.cc -o misc-inst.o
> ../../../../libstdc++-v3/include/bits/basic_string.h: In function
>    `std::basic_istream<_CharT, _Traits>&
>    std::operator>>(std::basic_istream<_CharT, _Traits>&,
>    std::basic_string<_CharT, _Traits, _Alloc>&) [with _CharT = char, _Traits =
>    std::char_traits<char>, _Alloc = std::allocator<char>]':
> ../../../../libstdc++-v3/src/misc-inst.cc:189:   instantiated from here
> ../../../../libstdc++-v3/include/bits/basic_string.h:1133: warning: comparison
>    between signed and unsigned integer expressions
> /usr/tmp/ccsCMPtL.s: Assembler messages:
> /usr/tmp/ccsCMPtL.s:45114: Error: Attempt to get value of unresolved symbol __n:V28
> /usr/tmp/ccsCMPtL.s:45114: Error: Attempt to get value of unresolved symbol __n:
> V28
> /usr/tmp/ccsCMPtL.s:45114: Error: Attempt to get value of unresolved symbol
> /usr/tmp/ccsCMPtL.s:45114: Error: Attempt to get value of unresolved symbol
> make[4]: *** [misc-inst.lo] Error 1

The unresolved symbol occurs twice in .stabs statements.  The file assembles
without problem if I remove the two statements:

--- misc-inst.s.orig	Sun Apr 22 17:13:23 2001
+++ misc-inst.s	Sun Apr 22 17:45:09 2001
@@ -41589,7 +41589,6 @@
 	.stabs	"__cerb:1282",128,0,1169,-2
 	.stabn	192,0,0,LBB3073
 	.data
-	.stabs	"__n:V28",38,0,1173,__ZNSs4_Rep11_S_max_sizeE
 	.stabs	"__idelim:r1",64,0,1175,7
 	.stabs	"__sb:r1121",64,0,1176,6
 	.stabs	"__c:r1",64,0,1177,2
@@ -41608,7 +41607,6 @@
 	.stabn	192,0,0,LBB3117
 	.stabn	224,0,0,LBE3117
 	.stabn	224,0,0,LBE3116
-	.stabs	"__n:V28",38,0,1173,__ZNSs4_Rep11_S_max_sizeE
 	.stabs	"__idelim:r1",64,0,1175,7
 	.stabs	"__sb:r1121",64,0,1176,6
 	.stabs	"__c:r1",64,0,1177,2

Does anyone have suggestions as to where to look to find out why these
are being generated.  I imagine the symbol has been optimized away.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: .stabs statements refer to symbol not in source

[John David Anglin]

> The unresolved symbol occurs twice in .stabs statements.  The file assembles
> without problem if I remove the two statements:
> 
> --- misc-inst.s.orig	Sun Apr 22 17:13:23 2001
> +++ misc-inst.s	Sun Apr 22 17:45:09 2001
> @@ -41589,7 +41589,6 @@
>  	.stabs	"__cerb:1282",128,0,1169,-2
>  	.stabn	192,0,0,LBB3073
>  	.data
> -	.stabs	"__n:V28",38,0,1173,__ZNSs4_Rep11_S_max_sizeE
>  	.stabs	"__idelim:r1",64,0,1175,7
>  	.stabs	"__sb:r1121",64,0,1176,6
>  	.stabs	"__c:r1",64,0,1177,2
> @@ -41608,7 +41607,6 @@
>  	.stabn	192,0,0,LBB3117
>  	.stabn	224,0,0,LBE3117
>  	.stabn	224,0,0,LBE3116
> -	.stabs	"__n:V28",38,0,1173,__ZNSs4_Rep11_S_max_sizeE
>  	.stabs	"__idelim:r1",64,0,1175,7
>  	.stabs	"__sb:r1121",64,0,1176,6
>  	.stabs	"__c:r1",64,0,1177,2

These definitions come from the template at line 1155 of istream.tcc.
It is easy to see from the template code why __n could be optimized away.
Is this an assembler or compiler bug?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ Issue on GCC 3.0 branch

[John David Anglin]

> 2001-04-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* builtins.c (expand_builtin_setjmp_setup): Set nonlocal flag in label.

Close but no cigar.  This one actually bootstraps with no regressions under
i686 linux.  However, I think it only addresses the symptom of the problem.
There must be a label uses problem somewhere.  In any event, the testcase
for duplicate symbols will compile with the patch installed.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-04-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* builtins.c (expand_builtin_setjmp): Mark next_lab as used.

--- builtins.c.orig	Wed Feb  7 05:24:22 2001
+++ builtins.c	Sat Apr 21 20:18:59 2001
@@ -617,6 +617,7 @@
   buf_addr = expand_expr (TREE_VALUE (arglist), NULL_RTX, VOIDmode, 0);
 
   next_lab = gen_label_rtx ();
+  LABEL_PRESERVE_P (next_lab) = 1;
   cont_lab = gen_label_rtx ();
 
   expand_builtin_setjmp_setup (buf_addr, next_lab);

Re: C++ Issue on GCC 3.0 branch

[Bernd Schmidt]

On Sat, 21 Apr 2001, John David Anglin wrote:

> > 2001-04-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> >
> > 	* builtins.c (expand_builtin_setjmp_setup): Set nonlocal flag in label.
>
> Close but no cigar.  This one actually bootstraps with no regressions under
> i686 linux.  However, I think it only addresses the symptom of the problem.
> There must be a label uses problem somewhere.  In any event, the testcase
> for duplicate symbols will compile with the patch installed.

You might want to look at the patches I installed on the 2.95 branch after
2.95.3.  This sounds like it's exactly the same problem.


Bernd

Re: C++ Issue on GCC 3.0 branch

[law]

  In message <Pine.LNX.4.33.0104231017340.7552-100000@host140.cambridge.redhat.
com>you write:
  > > There must be a label uses problem somewhere.  In any event, the testcase
  > > for duplicate symbols will compile with the patch installed.
  > 
  > You might want to look at the patches I installed on the 2.95 branch after
  > 2.95.3.  This sounds like it's exactly the same problem.
Are you referring to this patch?

2001-03-28  Bernd Schmidt  <bernds@redhat.com>

        * flow.c (propagate_block): When trying to delete a case vector, cope
        if its label has LABEL_PRESERVE_P set.
        * jump.c (jump_optimize_1): Move call to delete_barrier_successors to
        a point where JUMP_LABELS and LABEL_NUSES are set up properly.
        (delete_barrier_successors): If deleting a table jump, delete the case
        vector as well.
        * varasm.c (force_const_mem): If we have a label, set LABEL_PRESERVE_P
        so it won't get deleted.


Just want to be sure before I install it locally and fire off my tests.

jeff

Re: C++ Issue on GCC 3.0 branch

[Bernd Schmidt]

On Mon, 23 Apr 2001 law@redhat.com wrote:

>   In message <Pine.LNX.4.33.0104231017340.7552-100000@host140.cambridge.redhat.
> com>you write:
>   > > There must be a label uses problem somewhere.  In any event, the testcase
>   > > for duplicate symbols will compile with the patch installed.
>   >
>   > You might want to look at the patches I installed on the 2.95 branch after
>   > 2.95.3.  This sounds like it's exactly the same problem.
> Are you referring to this patch?
>
> 2001-03-28  Bernd Schmidt  <bernds@redhat.com>
>
>         * flow.c (propagate_block): When trying to delete a case vector, cope
>         if its label has LABEL_PRESERVE_P set.
>         * jump.c (jump_optimize_1): Move call to delete_barrier_successors to
>         a point where JUMP_LABELS and LABEL_NUSES are set up properly.
>         (delete_barrier_successors): If deleting a table jump, delete the case
>         vector as well.
>         * varasm.c (force_const_mem): If we have a label, set LABEL_PRESERVE_P
>         so it won't get deleted.

Yes.


Bernd

Re: C++ Issue on GCC 3.0 branch

[Bernd Schmidt]

On Mon, 23 Apr 2001 law@redhat.com wrote:

> 2001-03-28  Bernd Schmidt  <bernds@redhat.com>
>
>         * flow.c (propagate_block): When trying to delete a case vector, cope
>         if its label has LABEL_PRESERVE_P set.
>         * jump.c (jump_optimize_1): Move call to delete_barrier_successors to
>         a point where JUMP_LABELS and LABEL_NUSES are set up properly.
>         (delete_barrier_successors): If deleting a table jump, delete the case
>         vector as well.
>         * varasm.c (force_const_mem): If we have a label, set LABEL_PRESERVE_P
>         so it won't get deleted.

Just remembered; this also needs the followup

2001-03-30  Bernd Schmidt  <bernds@redhat.com>

        * jump.c (delete_barrier_successors): Fix error in last change.


Bernd

Re: C++ Issue on GCC 3.0 branch

[law]

  In message <Pine.LNX.4.33.0104231556040.7552-100000@host140.cambridge.redhat.
com>you write:
  > Just remembered; this also needs the followup
  > 
  > 2001-03-30  Bernd Schmidt  <bernds@redhat.com>
  > 
  >         * jump.c (delete_barrier_successors): Fix error in last change.
OK.  Thanks.  I'll give the set a whirl on my PAs :-)

jeff

Re: C++ Issue on GCC 3.0 branch

[Mark Mitchell]

  2001-04-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	  * builtins.c (expand_builtin_setjmp): Mark next_lab as used.

  --- builtins.c.orig	Wed Feb  7 05:24:22 2001
  +++ builtins.c	Sat Apr 21 20:18:59 2001
  @@ -617,6 +617,7 @@
     buf_addr = expand_expr (TREE_VALUE (arglist), NULL_RTX, VOIDmode, 0);

     next_lab = gen_label_rtx ();
  +  LABEL_PRESERVE_P (next_lab) = 1;
     cont_lab = gen_label_rtx ();

     expand_builtin_setjmp_setup (buf_addr, next_lab);

Even with this workaround patch I still get a crash using a cross
compiler, so I guess I'll have to wait for Jeff's reworking of Bernd's
patch.

Thanks,

--
Mark Mitchell                   mark@codesourcery.com
CodeSourcery, LLC               http://www.codesourcery.com

Re: C++ Issue on GCC 3.0 branch

[John David Anglin]

>   2001-04-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	  * builtins.c (expand_builtin_setjmp): Mark next_lab as used.
> 
>   --- builtins.c.orig	Wed Feb  7 05:24:22 2001
>   +++ builtins.c	Sat Apr 21 20:18:59 2001
>   @@ -617,6 +617,7 @@
>      buf_addr = expand_expr (TREE_VALUE (arglist), NULL_RTX, VOIDmode, 0);
> 
>      next_lab = gen_label_rtx ();
>   +  LABEL_PRESERVE_P (next_lab) = 1;
>      cont_lab = gen_label_rtx ();
> 
>      expand_builtin_setjmp_setup (buf_addr, next_lab);
> 
> Even with this workaround patch I still get a crash using a cross
> compiler, so I guess I'll have to wait for Jeff's reworking of Bernd's
> patch.

Strange.  I just tried it again with the 3.0 source from a few hours
ago with no problems.  The above patch was the only source change.

I just configured with `--with-gnu-as --target=hppa1.1-hp-hpux10.20' and
did a make.  CFLAGS were the default `-g -O2'.  My build gcc was 3.0
20010421 (prerelease).

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ Issue on GCC 3.0 branch

[Mark Mitchell]

After making Dave work hard sending me lots of information, it turns
out that his original patch is exactly the right thing.

I checked in the attached, on both the mainline and the branch;
hopefully it will remove the duplicate symbols on HPUX.

Tested on i686-pc-linux-gnu, and by looking at the .s output for
Dave's testcase.

Thanks,

--
Mark Mitchell                   mark@codesourcery.com
CodeSourcery, LLC               http://www.codesourcery.com

2001-04-25  Mark Mitchell  <mark@codesourcery.com>

	* optimize.c (maybe_clone_body): Copy TREE_PUBLIC before emitting
	the clone.

Index: optimize.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/cp/optimize.c,v
retrieving revision 1.51.2.13
diff -c -p -r1.51.2.13 optimize.c
*** optimize.c	2001/04/25 00:12:47	1.51.2.13
--- optimize.c	2001/04/26 00:28:07
*************** maybe_clone_body (fn)
*** 1051,1056 ****
--- 1051,1057 ----
        DECL_EXTERNAL (clone) = DECL_EXTERNAL (fn);
        DECL_INTERFACE_KNOWN (clone) = DECL_INTERFACE_KNOWN (fn);
        DECL_NOT_REALLY_EXTERN (clone) = DECL_NOT_REALLY_EXTERN (fn);
+       TREE_PUBLIC (clone) = TREE_PUBLIC (fn);
  
        /* Start processing the function.  */
        push_to_top_level ();

Re: C++ Issue on GCC 3.0 branch

[John David Anglin]

Mark,

> After making Dave work hard sending me lots of information, it turns
> out that his original patch is exactly the right thing.
> 
> I checked in the attached, on both the mainline and the branch;
> hopefully it will remove the duplicate symbols on HPUX.

While I am certain that the patch eliminates the duplicate symbols, I
am still concerned that assemble_external is being called with TREE_PUBLIC
and DECL_EXTERNAL set for the type declarations.  This causes .IMPORT
statements to be generated for the symbols under hpux.  While this appears
harmless under HPUX, I am not sure it would be under all circumstances.
It seemed to me that when there is no weak support these declarations
should not be external.  I remember there was some discussion of this
under AIX back in January.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ Issue on GCC 3.0 branch

[Mark Mitchell]

>>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

    John> While I am certain that the patch eliminates the duplicate
    John> symbols, I am still concerned that assemble_external is
    John> being called with TREE_PUBLIC and DECL_EXTERNAL set for the
    John> type declarations.  This causes .IMPORT statements to be

Yes, that's why I asked about this.

There's a basic problem here; both the C and C++ front-ends call
assemble_external in a way that is inconsistent with the
assemble_external documentation.

In particular, ASM_OUTPUT_EXTERNAL is documented as used when
something is 

     A C statement (sans semicolon) to output to the stdio stream
     STREAM any text necessary for declaring the name of an external
     symbol named NAME which is referenced in this compilation but not
     defined.  The value of DECL is the tree node for the declaration.

You can't know this until the end of the translation unit.  But, we
compile a function-at-a-time, so if we see:

  extern void f(); 
  void g() { f(); }
  void f() {}

we call this macro for `f'.

It's even more extreme in C++ because we don't make up our minds about
the linkages of some functions until very late in the game.  (See the
tricks played with DECL_NOT_REALLY_EXTERN.)  That's all really pretty
grotesque, but it's not easy to fix, and it's been that way for a long
time, so I'm guessing most systems deal with it OK.

--
Mark Mitchell                   mark@codesourcery.com
CodeSourcery, LLC               http://www.codesourcery.com

Re: C++ Issue on GCC 3.0 branch

[law]

  In message < 20010425173144F.mitchell@codesourcery.com >you write:
  > 
  > After making Dave work hard sending me lots of information, it turns
  > out that his original patch is exactly the right thing.
  > 
  > I checked in the attached, on both the mainline and the branch;
  > hopefully it will remove the duplicate symbols on HPUX.
  > 
  > Tested on i686-pc-linux-gnu, and by looking at the .s output for
  > Dave's testcase.
Noted.  I'm testing hpux PA32 with it now.

jeff

PATCH: Re: jartool.c:539: undefined reference to `strdup'

[John David Anglin]

> It can be worked around by linking with libiberty.a or adding a version of
> strdup to jartool.c.

OK for branch and main?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-05-03  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* jartool.c (strdup): New function.

--- jartool.c.orig	Thu Dec 28 16:47:37 2000
+++ jartool.c	Thu May  3 12:26:57 2001
@@ -223,6 +223,7 @@
 int make_manifest(int, const char*);
 static void init_args(char **, int);
 static char *get_next_arg (void);
+static char *strdup (char*);
 
 /* global variables */
 ub1 file_header[30];
@@ -1825,4 +1826,15 @@
 ");
 
   exit(1);
+}
+
+static char *
+strdup(s)
+     char *s;
+{
+  char *result = (char*)malloc(strlen(s) + 1);
+  if (result == (char*)0)
+    return (char*)0;
+  strcpy(result, s);
+  return result;
 }

Re: PATCH: Re: jartool.c:539: undefined reference to `strdup'

[Alexandre Oliva]

On May  3, 2001, "John David Anglin" <dave@hiauly1.hia.nrc.ca> wrote:

> OK for branch and main?

I don't think so.  strdup() is sometimes defined as a macro, and
sometimes it's declared to take a const char *.  Better check for it
and define it only if it's not present, or go for libiberty, which I
think would be a better idea.

-- 
Alexandre Oliva   Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
Red Hat GCC Developer                  aoliva@{cygnus.com, redhat.com}
CS PhD student at IC-Unicamp        oliva@{lsd.ic.unicamp.br, gnu.org}
Free Software Evangelist    *Please* write to mailing lists, not to me

Re: PATCH: Re: jartool.c:539: undefined reference to `strdup'

[John David Anglin]

> I don't think so.  strdup() is sometimes defined as a macro, and
> sometimes it's declared to take a const char *.  Better check for it
> and define it only if it's not present, or go for libiberty, which I
> think would be a better idea.

I think the simplest thing then is to rename `strdup' so there is no
conflict.  It doesn't seem to make much sense to use libiberty just
for this one function.  The configure stuff doesn't check for any other
functions or declarations.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Re: jartool.c:539: undefined reference to `strdup'

[Alexandre Oliva]

On May  3, 2001, "John David Anglin" <dave@hiauly1.hia.nrc.ca> wrote:

> It doesn't seem to make much sense to use libiberty just
> for this one function.

Perhaps we'll eventually find out about other portability problems in
other platforms.  There's no reason not to link libiberty in, after
all.

-- 
Alexandre Oliva   Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
Red Hat GCC Developer                  aoliva@{cygnus.com, redhat.com}
CS PhD student at IC-Unicamp        oliva@{lsd.ic.unicamp.br, gnu.org}
Free Software Evangelist    *Please* write to mailing lists, not to me

Re: PATCH: Re: jartool.c:539: undefined reference to `strdup'

[Tom Tromey]

>>>>> "Alexandre" == Alexandre Oliva <aoliva@redhat.com> writes:

Alexandre> Better check for it and define it only if it's not present,
Alexandre> or go for libiberty, which I think would be a better idea.

I also think using libiberty is best, now that Per has established
that we can't contact the fastjar maintainer.

Does this really belong on the branch?  I'm inclined to say no.  It is
pretty late, and I doubt that we'd want to accept the changes to make
java work on this target at this point.  java support is the only
reason to build fastjar.

Tom

Re: PATCH: Re: jartool.c:539: undefined reference to `strdup'

[John David Anglin]

> I don't think so.  strdup() is sometimes defined as a macro, and
> sometimes it's declared to take a const char *.  Better check for it
> and define it only if it's not present, or go for libiberty, which I
> think would be a better idea.

Here is a revised patch.  Guaranteed to build and run under vax-dec-ultrix4.3.

As I see it, using strdup from libiberty is something to be avoided because
there is no declaration for it in libiberty.h.  Gcc doesn't use it.  It
uses xstrdup.  However, it has a somewhat different behavior if malloc
fails (admittedly unlikely in this case).  If you want to link against
libiberty, probably jartool.c should include libiberty.h and use xstrdup.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-05-03  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* jartool.c (jt_strdup): New function.
	(get_next_arg): Use jt_strdup instead of strdup.

--- jartool.c.orig	Thu Dec 28 16:47:37 2000
+++ jartool.c	Thu May  3 13:41:22 2001
@@ -223,6 +223,7 @@
 int make_manifest(int, const char*);
 static void init_args(char **, int);
 static char *get_next_arg (void);
+static char *jt_strdup (char*);
 
 /* global variables */
 ub1 file_header[30];
@@ -536,7 +537,7 @@
       if (pos)
 	{
 	  s [pos] = '\0';
-	  return strdup (s);
+	  return jt_strdup (s);
 	}
       else
 	return NULL;
@@ -1825,4 +1826,15 @@
 ");
 
   exit(1);
+}
+
+static char *
+jt_strdup(s)
+     char *s;
+{
+  char *result = (char*)malloc(strlen(s) + 1);
+  if (result == (char*)0)
+    return (char*)0;
+  strcpy(result, s);
+  return result;
 }

Re: PATCH: Re: jartool.c:539: undefined reference to `strdup'

[Tom Tromey]

>>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

John> 2001-05-03  John David Anglin  <dave@hiauly1.hia.nrc.ca>
John> 	* jartool.c (jt_strdup): New function.
John> 	(get_next_arg): Use jt_strdup instead of strdup.

This is fine.  Please check it in.

Thanks,
Tom

Re: PATCH: Re: jartool.c:539: undefined reference to `strdup'

[John David Anglin]

> >>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:
> 
> John> 2001-05-03  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> John> 	* jartool.c (jt_strdup): New function.
> John> 	(get_next_arg): Use jt_strdup instead of strdup.
> 
> This is fine.  Please check it in.

Done on the main but not on the branch as per your previous comments.

I am guessing that a fairly recent change to configure in the top level
directory now causes fastjar to build again.  Since it doesn't build on
the branch as it stands under vax-dec-ultrix4.3, should noconfigdirs be
changed to reflect this?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Disappearing labels fix

[John David Anglin]

> I thought that I would try g++ version 3.0 20010503 (prerelease) on a
> real world application and ran immediately into the disappearing label
> problem building groff-1.16.1:  

Tried again with today's patch.  There are now more missing labels than
before:

/xxx/gnu/gcc-3.0/objdir/gcc/g++ -B/xxx/gnu/gcc-3.0/objdir/gcc/ -O3 -s -o troff e
nv.o node.o input.o div.o symbol.o dictionary.o reg.o number.o majorminor.o /xxx
/gnu/groff-1.16.1/objdir/src/libs/libgroff/libgroff.a  -lm
/usr/ccs/bin/ld: Unsatisfied symbols:
   L$38329 (data)
   L$38590 (data)
   L$38405 (data)
   L$38438 (data)
   L$38481 (data)
   L$38601 (data)
   L$38557 (data)
   L$38546 (data)
   L$38362 (data)
   L$38360 (data)
   L$38364 (data)
   L$38449 (data)
   L$38512 (data)
   L$38516 (data)
   L$38394 (data)
   L$38514 (data)
collect2: ld returned 1 exit status

I get a bunch of undefined labels when I compile the enclosed preprocessed
source under hpux 10.20 at `-O3'.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

begin 644 input.ii.gz
M'XL(`$AR_#H``^V]:WL;-Y(H_%V_HJW9V*0L.2+E6Z38\\JVDOB,+7ME>W:S
MC@^G13:ECLEF3S<IV?$HO_U%5>%2N#6;E#,[^YS5,Q.S@4*A`!0*A4*A\*>D
MWTLVO_WTZ=.W9\7BV[-J-A[O].[T[M_I?5M7PV_A^]LY_C<ORL7\SG"XN?&G
MI&T9_.^=\\VD)PKU^RN6<BL:#G?V[NQ^.SO]=917\"EH&DX6H^S;>C[*9UA/
ML@>E[JY8;&^EJM+JS-1U=V_5<GL;\\]E-LK&R6!PNL@G\[P87*2#25[/18I`
M,U2?!T#6O17;TA<5X!\U:5%7!N9S#7#UYVEM&M!?M8^I@O8=)BJ%!O,JV_89
M+[H7:=`@+^8._OM+X<P8#,_3*A%9#P>BNU7BHJCSLR(;4>["S:[/9]4<"O7N
M!TM1_L(#$`GP_[U^L!3D+G2V6VB<UO/&8@K@3\G#^^V;+^N#?Z?I)ZL"E;4P
M>1N&K,FL.(-2Y;P*DH7Y"P,@!F^WO_JP#":9:-=#JCP^/$$PV7.#<0,&U7LA
M(#W,A)W&,H###'<8D-,116(1$L.`Z"5_-*`(@G$JEJ,P4&+@[M]K/W":;<2X
M*P3]MO*8S_=^=,;[(JRMC'3QXU\"?^Y\&&471/O==<3<'B'EB!=FILWD5'+K
M5@(CF<Y&F8()0Q23O/C(05SZQ^6L5MW_8#UQZS2`8]8-"#=Q7)]./@X+S4#?
MK3/^'@$>^C`5"DKH$)J!6R^BX4$,H%[:`^-\PGJ@MW?_JU#@5=#<!_8P].X]
M^*K=T&84RGP4Y&25/[E<!G&V)'^Q)']N\A5(`*JN\]^R^*#BI!L,ZGR^9&(.
M!L."S5X'#!?%>3[-I%Q<2W#MA<6V:@"H5]=@=X_3AI/9\*/3'J_[/F:?"81C
ML-?'P6"!/PXL((5@,!BEHQ%J"BP7U_<MT:>!/%.ROA2<&.EQ73;1.$)@6CB'
M><GH0G4VG!6C.M8?&K":Y%.]_'UWK34DB)N1:9I*[)DP+@T-!RE-`_CGH&&\
M%@,Y7"$0U!-``PAGD_(W@'\:RD>+2P(:ZJ<VG.;SAXT8!$#OO@VA1U+D[?5]
M;JL]I(2K]G%IV2%1.8-!7)EH[K1R);<G(:[7,B1ALL1I`VK527G^N0X@L,>A
MM!G?;H#$DYXU<0P-)_S7HT7)/;,0A#J[+M,A51#*+:O9W&V!ECXC4I="LE9,
M1A=G/:\60R$3J&.JY(MI8_6^]^$@N4JV9-Y!J-S?%^E(%,(&7Z23]WTL`JF>
MV!*-6H07#&*8H<RVLZB>27J:301-7]QE22^+IY-!51X$T^M8^OO>@P^1K!H:
MK[-&L\7I)*.<\?N['R255XHN9XQ)"H^F@VE6UX)3#@*"3]66D@3]4[+W<.U%
M2.%$S4!(,XGQ[MXUU$A/BQT-IFG]$?'>_2KJJ1Q:@;C.8&159ZNJQ+_U0$B*
M^GVGT^GOWGW8O2U^P*H]&W<D3#?92AYVNSN];O?;2%[7C..5K`P;\7#W6KI=
M]FF>546R^713D/ZGY%YK$UH8W=4JNS[;L.10LO=P95N>/RA?^*Q`^3HWL\%>
M5(2V(>1%0^YI6F>!;*7DC"?I6:RTR,TGV8OF[)\P^RKYX?F+HZ!P^Y_7F$C=
MBW%6C,H&B"*[C!`HJZBG`LG[A\GM_A9*,2-(+V;Y"%`L"K%*2.%]E0R@4_^3
MMH3]=?C*#(:4H:(*;JQM;2VPL$J6!^)$H_+9Z?L/!ZHM,@^&NLJFLXNL(Q30
M>B[[J'L0`BO2J0VVG305HM3YM!3E.AK$13L6&X$ZZR"1P?SQ1&ALX7P<#2&I
MQ&A)@.TD6I&`N_`!MR%O6^YR0M67%1A!32FK^7?NW`F5J8=I$2D2+B$K:0%)
MJ-L`*IR!D8H5"2!O4VY\ELV'X1&B<@!0=ZP.CX]WN1#(EL/4#IU1X#AQ*E=@
MZ``K!6EGI(<&;CFQ``(UB-_AW-J=>B[,HL`VV-584)0JIAH(QU!;U#"5LUKS
M)5G<PAU<VZ!$8*0``8UG958T2X=`H2I;4HRU6,C![]:4KG;3LH^Z8>JX`;G2
M(5'E)>-Y-IDT2*`JN\R+40/`<)*E5595#5(.-+*&W*J:14IC!24!./TM=*4'
MJQ[S:5U+HB?!F(B!2D<=6OV4M#3_VH1Y92^K?*X6CJ4H5K%KQ$<9=(P:I+VU
MM#?,4M0KS/*`A.S=;ZO\A@FA@1B*W]-\U+`"BCE;S,*C*Z?)"&<)\JDWQGL/
MVQ\5.V,<4CL*L6F6JL=@8'0?JTFS<IY69WY+1+I@Q&"ZF"#!=/&_`Z-?V8)9
MY,DV8ZVRZ>\_A`6+V^U"0:MXMXO-S&Y;:WF<L019E_&)*J3YY;+EH$'?H<1R
M-4DJU:Q,ZEE-Q5;9[,:[X"*DK3@N!H&&7S2K4LO+-VHT?GG1V'O7F[]4:T`G
M:M'6!A6P35-EK>U:Z@D49#&Q1P$3>Q99F(QNO020J7`&LKTNQPNU4]BDHNZ2
MU59CC]<95:T,^)+V@.[@T]5>B5C2U4R;6`+)EV4#VFY]#JW.;H>MA`F!QU`>
MU<\&&*HE#F66PQ;<"Z*X!1C(Y-@`"QG1^A`YM+6.&!_F*6ZU_Y3<7]D+:F_C
MRO-D:N,)UP\X-0QA=6?N:[NQ_#W;.N8N^M"+>9U.BL4TLHN!W/(\C>8.BWDU
MB>:.\K-\'LT]J]+R/)H[F5UFL;U53BM&/'=1#..Y>+@0S5V494.]GYJ:-)\U
M$3V?<=2PB,5'C9?U6!'A#EK`]$/:,(ZVL\OTBB_*^CP?SY=4,II=%A).S(@&
M)@QP53W,\VA'\=P_)=\]7`4S9I(TX*>'P=$\G:3%1UU/[UY#1;Z!>I7)VTI0
M")9F?J*][U8MM^>9PEOO'PP*MY.FV70X+9W%([24!)4+@;D8IO.(OA-=Z;&8
MKG6%PD22H!D-G^N0.RP_!ZF--R]28&E%D6X)=T=S;T3*S":3]H6DUB#*?1I7
MT_6:=%XY]?D33P.7I]7'5?="HMAJE8C_K5''?/9Q)1X@&XT2(ZW/,=U9YW,Q
M\%8;)@Z4U+VD2@1T:[^8T-`[;0H89AG699LM;:#DTH+L="90?.)LI4F$]U:6
MMO'.C_>^W37@K==Z/QJ6M)J51HO2.Z_9\/0V,QM68G`E%](Z6T>>%,L+-LCT
M8C)81XY1L?:K`2SC:RQ[5YY7\+JZ.7CKJ54<_EJZ)+LN^`J-]&I^$,F.N3QS
M*@+%.4AKK^F>JQYQ+,;[>KTK'JCN+$?N$9F?91=9,7>NIS2!<7?(?`8BY>PB
MG=#NB"0!*<IU+I*URUJBCHAUCCHHOY(8G+L`=/:N*@ZA%SE@E,W'GP\".:"Z
MSE2&JD'GBJ]%9JK'.J372VBL[?:+"2;V`!H7C@1W0$G>//_QZ*^#XU?'1\FC
MI+?MY8C_'A^^$,E7:-9W-7]_Z()$&0:$%E)_S:>:$-P*3`="Y!S8*=.\<%+.
M9XO*!1JEG]VDF5ON<Y:ZY2[]<I_])+&UK8DOL`?N+VN>:IU(JLMLR+DAD?Z]
MR?R"VJK3R?E7\`@F7QVXO*6QX0](T^YE$B*'G$K6J-"ZI?,Y,'E6"98Z:`*2
M+'?%N5SR$;K\HO.5J>;IBU=/_S)X?OS7PQ?/GPDVVMUVLDZ.#E^\??[283'*
M^^OSD[?O#E^(K+Z;]?KD%5IY'B5W3=;)6\!TLBM2'WJI/:CA_L95HLFT?7%C
M#HS8>>I"P-UE#.QVFY0IB?/G#K8/H89]P3@?^8Q@K:&E2B*U+QM8"<-$B7;4
M8U"_S8K,<2&:_P9S<#'/ZLNL9KY$,D],#2AH4":^W^1@^'DXL:2.W??G^4$D
M9S*38H\PJ)L*38L@-^RIO7'OP5*1I,O(,[11/AX#0(?&<%N.9??`T\_D($\_
M(K@1;5MQ6(;84GXMC2^MAPA'ND\S7G5&:>!M[/;FSZ`ZFZY<1$RK=-*RE-;?
MJ2MM_<W5ZD+M_%.RMQNZK^A-1M4/=!V!_E4>%`()6F+;C3\N_//?U.:(RN^%
M+B>&.$X>X_T&3E;@'QS0YV'B$)VB#NH7):K<3E`".:0K$XHS'\5*A:NL7K4L
M2<IAE:5SNUZMF<!H2GD:=D*CS%$VR>8T#ZK@+H)R5"]).+DALSJ*+7U;VYZ,
MM?\"1:)5G[E5KUAX=I%5U:)H:&*1%K-ZDF5E)S+RX3$1+/F@W2+EFV+8W(UL
MK]PI^#!TPS,V!?5J"FL)=P;GS19*UB0_.Y>>VTLG5\(6%<0_&#`7[7O!J\-^
M5]B'3C2&9#OVEEEFRG#.-'FQ``]BX?8(%SBJUFB4Z?P\(`<`28K2NA9RI<LT
M1[M9`#$;B_[M.(4%5;2GZ3)/#;MQDVPX[RCA#$E;[C]!LHA+[O6;-G6^K3D=
M_1I8W@RQ@4H\5N(K638?I7/?_S7FE0+``]><PO#))IO.LMG`='.,?B\==:NP
MM26XFG(P<@^K9N-\LN1H5QDF[]UO(1\"78*>/[+7KO"D9_GZ*QOY,1\879B+
M7*7D6CHNSRC$YERJEKC%\HP/]@:S?W]=VTV[,UPA9GBXD+;W8G5!*X`"7'4'
M95+>]GOPQY(^R4_7.552Y0)'R!L;-J,,!L4$KP<.@.4"]\:"%Q'^OI@Y>X<J
MFTK=?I1?.)>X/!3:_\+&HY,-LHG$)CBWO=.D;KTM*N16()W/QIY<\<39?)8W
MN:EH4@7@I`E05HHG$ZZS#?T;18UEO%,@*A,Z.;'W6AK#8@44V/EI,0IY*Y-?
M/^8N.9P5@N=3+@\C.EO=A+"%T"%<[`Q(R+"LN%CF+"3DUSR;-BP4`FJ2"UF-
ME)W6'518NLD7P67SA4#2&3W>[?YYM+\S.A`BTF8%Y#[X;R?F2400\$_'>!RI
M7[&1G0`=$2`\N#UU3T@:C//3T_GL<MBYQ$D\7\&J?SF<SZ:G>ALG$82/%J>G
M-=12KUB-+"T*0E6U<S+'<,5/A,=5IDZ#0]E_KV?5/.IC!<T4'-AP!-Z5AT#M
M?=@CT@71I:>*FL@YW6F=I=7PO,69O->(9$DK0M6)O;W8T75LC+$C1`X;@1&[
M1`3RCC)AD6_OLV5WH25?LOG'['/3G$>PB0`XN_NPX]YB>_\A(6*^6W^U<"U'
M(/%$5?:@.D"9!/+(\4O@M/]U1?A)(Q$(,ET.4K2OU0A[`0^%?1`'RU:=92V1
M2P?`@'"',!DK:T=L=^S70[<\1$U.OP1`UW!N=]'HA:M,:^\&D6VW=LI8WOLN
M99:K?B!3:_FQ(\O+-&?';+V0`4"!M#]2#.TD%)9K'RF&++PV\GO-K6"]Q+5?
M1ZS1M7,HU5$;Q!B`^-4IR39F=M'V&3_LL!Z&;)/+.K?*ZMFB&O)CW]!^CX.U
M'Z=0/W%,?1.GKTV%:X8!7-:>^#FQ?1[>;]><O77[;P`15_+YX'0V^LQ]`>0F
MAG+YZ1!%:*%_A@MV`9MG3--/Q"FX(=YKUX:'H4E@MT%1M8!8#?'CI&HQ6.AS
MG0A`30#V;DRD"]*KN@YDY)3N)8_"R74P>9H7XXF[!\1:?PVF%_5E6@:P%Z=@
MNO8S8'T.9N2SX7F@VOJLYI*6I5?#BQ`Y8K%+)X&&%1?#^C*0G%,Z,4*OOWR(
M`W(L<=>MLLIG53[_++<I(Z7`V5#$)9:-5#+.E@=>AY!JD>>CQFEAHZ:9$D3-
MP2W+&BL$BT#(:\7K'92ZH>ENKQ??+5\O@BM&8OZ\-6&O8Y:"4)^JV`/+JKU"
M7FB&O-9R&I3N_F(=\#T1W+UD53)`UR0R-$`&^2J.1$'=I"4J(9#<\,(-4-=;
MAAFB:VM,D29S_/)/>Q`-AK.1=9#_YOG@W]\=O0,/C1WFO2&2W[TY.H'4GI6*
M/AJV$XA(/7SS\_'3YZ\L!Q"1_/+HS8__+H#W-JZTUM1V0/="DL!OG>>J($%L
MIQT40KGMI:53H4N\1*%@<U#MTB6RI`N&SB/'--MBCF5<(ZC[1U)E,!#_^ON+
M9=A7KLU#+&M?--6N_JX$X,=\,ED.N3(=THUNGLX7=3M"WCS_\>F+9W%8@"E'
MZ3SU03"KF@W]G*5TJY@S$&\MC'B<+K@"TQHS]<"X81CDF>EI6@2`KF0T'N9^
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M+N"AR2+FOC]94/L`7##3#OSD[-,P*^>]:$X_FK,7S;D;S;D7S;D?S7D0R+D[
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MQ$"])@[J-;%0KXF'^DT\U&_BH7X3#_6;>*C?Q$/].`^EU5F<AS"SH62\3LQL
M*!EO)V8VE(SW+69:):V7?^K!R)'-?G93Z2J;[S:61X`E&'K+,/0:,=3-+:B;
M6R!6DN;Z$:`)P]"3<B&`)@SE</;WP3G$^6M"8Z":<=6M<-6M<(D:YVD^64X7
M0BVEJP6NN@6NH2=O0P!+,'RW#,-W2S"X$BT$L`3#,KYQI9L/T%^&H=^,H5R@
M?MF,10$USD)7ZPKD-Y=O[D[(;R[?W)FUJY]Z^<U="?G-Y?>6E-];4KZ9I6M7
M`_7R[R\I?W])^0=+RC]8PHO+IL.RV?!P2?F'2\HOF]#+YK.KY88`EF!8-AM=
MO=4':&:BH:>_^A.^>1HBP!(,RV1K?YEL[3>S(@(TZP2T$>V_O_\A#C6;C(8?
MZ\4T#E%DEQ+B2FU]H_9>`$^K:G;I'C^C9NN9!9PGMJ2B$$CS;;=B+QE(\^VU
M8@\82'L82/LND,:/.$RBWQ#83(420VWIA1K3"[6F%VI.+]2>7JA!O5"+^J$6
M]4,MZOLM`JT]E!B$]'&"&MVD)#<KP,W*;9/JVJR6-JN<+33)%@IB"[VOA3K7
MK*HUJV'-*E:S^M2L&BU7>1KUF49EI5$3:50S&G6(1@6A<?5O7-H;U^W&1;EQ
MQ6U>39M7RN95L'F%:UZ]FE>F>.ZTK,<+L;*=G2^#F<PNEX',+L9D569+C[R;
M[-UN:&U4-@"A(\M)>L9\>ZQZ$_W;$WVE+0/(#THGJ#_[3%5\BJ^#$%1N+.CB
M,R_F]O7:*Z2T=-SL\5:3R/@TJ][?W=JS[-.2(M%O7O"U979TTQ72:@YUW+_K
MTZV5!P#88ZR)Y%[FX)XF?NIJI*=,R-O7=F9IOAQ/;H'.0A`>315.J98W[XFV
M>:I.N'4=C,9D.IP5\^R3>8A;7TP1S+$X'0SGG^;^-9#!8"'+88#PX0!>E+<"
MF&G7(LP67Q2-A0$083(?/@[H-DM(,].U&4H,X8E`H+[L/@+,92I4271D"L]&
M`4.QBD:#T\\0E$=BVH]):%%`*:<T`OM\%?8[#XA8G&KZ!),L6)]'(FFZ3F![
MH>`I!@CX.?*N]]D@G<^F^5#RXW(\+%IE.IQSGT<]\]VY+R_F@_`9Z&)=>7E#
M.;PY$6;<JQ`.FO.T&$VRJLLO\Z,KG<S0PZD9312R>0S;G[)90C=D=IN=[IPN
M0,[DTLZ:D*X/N-B1%)*7=7W!FQ+1^BY8>$;9'_5%N#>PQ@O9:"O);7+,V9V3
MX%U4083\]JZ@!(O0N)I@#$!3MQN)WU^E>9VQJ/HM.L,J#[ZN[)9DH`91.IN6
M\\\0D4TS0S"P0WXV%MC:P*6CD0W64/DHF[2&S>MI-CW-5%RA5F5H-@6N-ID)
M:D(3L;0P-O"Y!8ZQ\#$REO5,O:C+K!AY#8C4)D#SXLSN;_![;2&&7%QPN0@D
MB5>U^,<2,_!OF!RXD#C"N[G+<"3P8TFHN$A$-@S]M(@,YM\7V2(C?@:O\VV5
M7C151A59`8KQDHB,3-!J2GES^;0>#=SY#)$M_-GL3\CRS)Z2(3@E.SNN++68
M529U+5'J\/]D3HA4?Y/>@&CDSS"E.)QPE7VA+N$K,=0/WJ$+]9G7;<0RM@@,
M]YE'S/EL,EH&4X$P608$[%(MA2K3!9.\_;U08.;8E%,^X*B#6^$:'`#1%RA-
M`B"2#+&@S6>A@'ARL;/8X2(2,5'T.^=52G*7'C>ZJ-*'!97XR$\T;LV9P4U]
M=:^%BG"%VOVRN;>:I_K=X';!U07O!F^Q-M>*$)]K"-_"JELBAIM=[<=5:EVC
MC[E!:3AOLXHY0G^I/F:58W(=3P?9R-GQ0%KM&E,AT37$BK1A(*V>^&"31:`2
M/ZD$9>_*(ECJTP^;IY4<L>]:RALS$S",[F":U\/`716<6J)!-*#^7E7F<UTT
MF,]51_-'.VV-?D`*11PNFPE(/]N)VP*`\#1*E!J(@]EKS.U'<]/J[/U=8Q&X
M,DN2TZ/QVV%VG]?TKU^AM7D64"P$0;S63]>NUFP9`681(DPK+T!5SJF*!=\,
M+7AZ__JISN-4L^UMB%H8%;P-",K?@;?/LXAEAT1$ZA(9&)@KOG%`=]N2.WLN
M=]0-]^J\,:T_^<!7HC^P7R*L.@16K3FONO@MH2C@Z_'4'LM>,/*)<_7^7FB\
MS=5_*V2_Z9[7@]?/GVWSSQ_M[S?VYSO[TP%^:G\>OG@A1&@^@KH'CLF/!Y$#
M-5_H21).Q8FPS`AZ.QF,/&S%0B`.@"1GA;G4-QTMHU3D=J`CS"YMDZ@'116<
M@#%IE.T_7`KY5.ASH\6TW`\(0`?T;59-1<(^L]=?0?*!;5'YNBUY,Y^54.GR
ME@"D$-4<$LA[8ZP1_;OMW^N5`;E,J`&W=AZV\"/$;2P[[4)J33^V`@;$\_GG
M>C)CX=[[*[P8'@L&APIT>O]N.-:G2^WD_MTT$C6-`++AQ;Q#UYQD[!"@G$4I
M#I8:KU7JS"L5(QZ5ZVPNU@J(@Z;#A%JQT/RPI4[Y*BWFY3R\(94AL><UQ--O
M`H$X@Q`Y.QBY-%PQ/28;JYG,@!?A$(=VW7F1SU%CL,*<;D<"7;JEQ0Z+"L=H
M-9'U9E,WD&J0ZR2H>;V@U_[!=,;.4L)`E$<9$4-5!KT',?+8M6](FE6CT\G'
MVDZLIW[:>3CI?&2G+4)EQZ'$1;#J<3#U8Y:5PQF]9'+%5JG8"8TM_P3*WC;^
MTZ=_]N@?M6NYPB$8T.PYB$0L*2]'#;>796[X-5])'40+O!RQ(9$3Y7(`$^7`
M3Z8"[,2#+%27=E"",Y5ZQE,UDO0LA'HXFTZS8A[(.<M$1P?2!=\%4NOS;&+O
MX/`T#NI=C'*'-RAU/#E3ZT[PO1+931A?\5*TM+,PD:X:844O^I$F[[F;/#U2
M'!V%*2Y&Y:7HE%!8Y%!]$5`5X=0"^%-RW[5*<$*4&CMP>23,(C$."0YZ=$PB
M0^*=,SAM'^O&A]\V=YH"?54OZU<7>LFPN^!ICC8\:&:[`L@JP3=67?BQ(9\]
M7=[S#"MZ-*\P+.&ZVE3K&`T89<4(I)9!XW4I+:B`"63$EK"!RJFH%S*N,;1M
M0RN$MDL:C8Q5&;+/L*KXN$EYJZ1-XK=.BGH,UK9B9\FQL:IR)WQ)3\P:^:,X
MRPYB/B@PBBO+D`J%R!(YD[R>O_\0RI=OV"92\2$N6SD6LW9M<-`/)B-45MDZ
MV*![ND7'ZQ<]"Q>-QH%'V=.)PU#<Z#V(J(]JE1?`W#_1HR*BQ)X3N%PA\(M(
M_7\^@\==`2P.M)!05MC^1IQIR&YOD*4VJE!CIMET5GV>IF7@^-=5$-6/D'#&
M#1PHT_91#0=A0R=?,H@_?_"GY.[N&F&?\>'7AW_@"QR.A.M_MWI=;F5N*565
M>NEC0[Z"VK+`ABOE@@];;R06K^>#^6R0:A:PLL8Z3PWJ5>LV4`:%T5:-L5]7
M;EG2U96#D;(#\;$#4;'M)/&_`^TQ!:5FQ<87IPN4/H7[F!0=B=7G%GAJJ`]\
MFE'I1<$PXLD`"@]#1\7RA3_:4B/811",T348H`E(X*Z[!WZ%`YAP2VI=I>JF
M^I?`6_T+!8&TQG+8N00G!C+:O,&LF'QNT\:5&[I6:Z_5Y'"[-VC];C5IU,J]
ML:$G/1QW6%(66`4JR87>6L&[5&J)@+I6>8DH9W)PK_&Q;9\\4H\_S:<EA%I3
MAB689^6C7;4.E&(Q'.>?(`$('LT&"WBWY>.CGB"50``#F`$GQKX"?"):-"L>
M[=*F;A79B1T#+@=EE0D&&Z.QWWZ]#;J)2Y]\,LG.4OEBTCP5BQLH91OLB1D%
MD1?E8HYPR+##+@H:^>;,,'G\*-E-;MX,(1Q^("WN?N-RX[2E]5AB@&6N;Z]<
M;K5X<79]/.KK.L3NM=P^^=3"=@%/@J#'L"C\>UZ6J>C4G?-2_&_QJ;=[I[_[
M+>!LIN#:R$+;(;>J/6]'M>X8?%NF53IEF-MN#WC1ZX4)W&O[(`NOLMFCP6E4
M-&Z@UX*`IX6`K69M0@:N0IM80CA]L9@Q#LJ]MN;=Y3WEOYZPU_;UN_;#4)?,
M1V7OX=KX][P!-.PN*=C[*A.9(UM)E,A7&=80?;+*EH],N>4>K*8.@-/T*LL@
M+7ARJ_;Z.43HOM.[V[OW7?_^O;U[#[][\-U>?^_AW?MT^'#M[5:,FK2NLTKO
M&_IW5RJS0<]OX:?0!@;C5&@:(^[&9I[AD8LUEA!J!A7"13K[5%:D?@"$71)4
M%UK#\W'2N0&@7=3MO$JI+,)+<TS_#^NT47:1RV=C6N\<=1FMV;!F4B:]DKW&
M;A<[%=Y<*A;E("U&`_7"7U)`U_.'-.&1T-JH5_B9@`L3**GPN]B6B9_4C\]=
M%Q[_.RBS2NA;\)X'WSBD]3#/![/%'!0QVKEQD]NB%&H?7`'@`!QB#D<AT`:O
M[`6\03%9D)\52S^/I,.1(;;,5[IC@S2L,S,7&OG'*;&^<M5O''"7L#Y_3``2
M!Z>+?"+VX<F7Y.F;H[>#)^^>OWC[_!B/#H83,4L02NSG2R%H\N$^;+O!-Y=L
M$/"+8V&I[H$[2]4&+Y9-6_VL2L&/M=NQ0+K$ZV01`6IN*LA_/%(58;*NR(*P
M<2&6<95G!;"\:N`@Q\=OQ6[K0FQ3]I5)YN)]_]Z]Y'8/3;AZEE30^BM[`P%(
M]O=C+1`;"6H#WTY<R#V#0D.$VXA<\M6.!,K""PX'!MW6_#RO$9\2$(!O6*>3
M\CP]<!+%-,HJ-W$RN_031_D9](R=^"F8BA[`;F*Y*(8>9#HI(%J``UGEA0=Y
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M&?G6T$S;<^VL6IEIL8C5R>-TGDX&E_G\')^70%489$?'W5*`%=1L.1KOE?D=
M)=',JFDZ7ZG@ZB/ZM49X*9[`B+OL.ZO^MV?7P+.L9R_3JLB+L__MVS7P+.M;
ME`=+)>Y:S5RK3>M-N__)#9#<W6+56Y/9UN2M5@T)66K*:G8&1F8ZKV;6AN&B
MJK)B/J"I>1`JJT#47*:;/&O8>U`M4X(#M"Y4MO[C\.1X`+J9:,HNO@V(*<?O
M7C[!YP)W^SKMR<G1X5\@Z:Y.>G;TXOE+++FKTXY>8#&3\.;IX8LC+&?23@Z/
M?SRB@@SPY^.WA_])I4WJL^=4UJ2\/'PJBS*$1S_*@B;M[>$3693!/?_QI[>B
M*8=/5?4<\?,W;X2RJA"9C.?'K]^]5;A84T737AL\K"6O)?Z^G?[#JV.#AJ'_
MT>#8I5`MQ`+`(]245V\/L5][#_`/-TIS/5/XL#K.4AMQ#FYD^J\%2O<ZVFY>
M\"CVSG#80@]DI>K/T]/9I)T].E1,[F'HFV_6>$]NX9'O@;V3P[3!`C=R@0P5
M+DBA0T0Z_!(#IZ!-"MS9_YA-#5%HGWO3XGX^NP3VP,V(A.I:>W=TA#M/ZW.^
M0^$&@.31HPZ5C`'<"`!8H@IN"Q;SVJTAKP?%8C*Q-T&VK)-=?_SNQ0LA!EX^
M>?7"F`(H;W]?-2O93^K.+FS5KRQS@8)3].KV)&7`4E"+]B;EG?I@"98;2[#<
M\+#87:[P\:[G&!Q/0`N3Q0<2C]O)%C6QQC@CX/7#+A:4[10@PW0N6[TM<<A0
M!W_H-![E>!\ZK3[KJ7Q_G:+*:TS,Z=DP3W6D)=F^6N_-M_"9<`:&S'4AF"OY
M<K5A#&L&>R!ID,_E_(`Z3'JR!;_U'.#3.%"XPPK>U":%LTR-@XGQM"7MT"X=
M6+TZPE`(E&22=I(Y''M`M`R6-DXAC(33$8F1=EAKE2'_D@$DU!!M&R$B)[/9
MQT6I:*\5[1>/=GT@]]!/95?9=':1=33_.;;%0"?RCIF=_IK)VT30$=5PML"K
M,H9X@B`Q>9%7\T4Z27ZW$O&@<C0:5-DX$TK8,&/I1)V=Y=8^"#".EQ/C'Y,^
MLI@GCJ#C94592?:.PTQ^>8>E1XV$:!Y0V&TN**:F]T;9&#:K.L=0)/[EG8S7
M#R68X%N`5(6R2X[1XA95%YXM3O*T[O!"&@4B]#DKWL-RZ6(2-@Z[O\^[O"Y9
MI\]*R]`\RN\@J`#IJ#D^*^6)=&MM9CV9>WZ!Y[+MSB^#Y23OT+>>;P7G%,J3
MDX=^XW^EA@+EYN!$J(&DUO!;5LUXJ9M:%[FMS@!E1A!H)P0D1UIY%O"S[(NF
MP^R6)2]TT8NE9;5B==NF4VGP2\G6"':^,H)`"4L3_/:Z]7D(E.AH+K:U;C'F
M7=*RB=^OVD2K].-KE?[^T?4JOU[Q1]<K?F-I<78&(D?JK[L@5DF0G#<(DG,F
M(\[7$B3G,4%RSEKG`NV$@.PN..?BX'P501(I*;6S3_$2GO@XMSM\*;'>[/]:
M"-J*C[7K\Q"$Y8!;;&O=8DQ\M&SB]ZLV,2@^UBO]_:/K57Z]XH^N5_S&TN),
M?,B1^FGWP+W7,Y!ZAA0P6]N.*T"=>U=7!E*BG*]09&DM6@\HJ^QBH()+KEKQ
MMFJIA67#6N[V][6>)3:QA6LAH?(*U$A)KH@66Y:[G&U+4$6U.+5*&BM"*QTG
MN0E"T4GY+-V<Z!NWI(*=$@P&5=TIDMN/DL]W"N;]5#55N'/]"G>N66$`O<#Z
M*-GY%,?:H&<UM4&B$HB_19+C9(9PDM=G<V=\^RAIW15;:]:QM5(=B-'KD%"O
MMZVC00-LU_G)]XG3_0UJ84N4CQM1.KIB6S(?-=.Y%M+'S4@?K87T43/2&VLA
MO6&0VNQU4XNYR$[3,!C*(WLB&V_,)4AWXDAWEB(]5^)>:<-Q<:]`8^+^/"[N
M5=&6XKY9)^7#<NX,R_EZXKY9!5VKPF9QO[S")>C7D/O+&Q.7^\TZLR>3HV0W
MR?UF!;M]'4TR.:B-&[G?NOM7EONK='Y+N;\2RI9R?S4R6\K]U0AM*?=70MI6
M[J^$-"#WU5Y?R;N(86`UN1]#NA-'VE;N+S<Q^-,`A0^5*^Z((@*8+!$->M92
MDVA$M[UF-0'[:8N*X#]B8*.5+;.Q1+H,7&]%!5N?HH@YW@A:60QQ(2:W=#D3
M>?5`K]$2CU5:-G;;N46UG3SHJW."QEL%USXGR(J+=KZV7ID-'=[WMVQ0I<59
MIFU[T[Q01KII^HF?1(UGQ1S=(;@W!L.P1:$=`QX9!0+4"F_)S8<:*]D"S2="
MXC!HJZ$8#DKI\"0<AU$H1^I7*H4Y(>AJO,P;;J9L!QX"@>/_P#03:<1FU_9%
M)(UA?Y^U3^B$9<A)@D&'2$S&M<5W)<CA<7VG=`5Q`,^-1CPWEN+QN]?"T%PR
M6.1;=IOO2@>3$6R95[."0B=NR%DO$@=XOPD>')N?=Q@0GDHS,+SQU`(L`T<-
M`=D27KX6UQ+Z/)V,VQ11C18\="!]`,5/Z?^7O#U\,CA^=7RTC;]>'/WPEGX]
M/3I^"[<TX#=ZS+%;1E"\AJC%.#7%%\5AS=/)`"*?':C$*BOI\2]*-;-0(Z#9
M8CYE\T8"/A4=MVTHA?\XP+2.&F+(L/B[@QQGDF;T2"%=C:H99'&!,>'34T55
M.:NU%6Y+`9HZ]!5!YC;@EK::0XJQZB2ZI,4<(6`RS"OP[5,G])BI#8,O#T]^
M?$Z>FX=/Q5@-7AW3U<!E<,='_PDNB'W#&E`A1`\[4`G%#)[<DQ^G599^Q-FE
MDW#FC=-I/OFLT^1[1.J*+LQ2S3&<)Y7H'RVFT\\'9M5%PR:4&DRRXFQ^SK+"
MJ5A@GL\G@3PWV8@E+*4<9$PR=YFILK\OLAH8EZ=BP7`6QH,YS_*S\[F55$_2
M8FZ5APJ+F4HR7ZQ#P5D8(&7O.GDF&1U]<-YS4AR9P[/2T:^+>CZ8XMA*`G(*
M^YJKX#KPG@_Y"VF2L?,#F4.HJ<)LO=96T`4#J"8??S99E@$<[M_#HPQ`(#YA
MH/,;LK`H1!UJ*A_-M]OB9+AIG+OR8B3#Z\I4+P%"',TJ]/K066@\@;<L0IE*
M$4WAC4,?75K!<0`^1V&X5](O-(Q15B&]-A^9=-WETNN$`AO-J[0TPZQ2!LHA
M"J=[LD4SUIE>-B$R"Q<:(2+GZ<3F1)VDNTN)`G@1H%)+@Y2]XE=MJH=TY=IH
M]<@I+6Q.FA+`EOA6KO*XUNEV9:GHGD$A^5X).UFC^+)3);C*X$[ZXSPCQSE)
M!WY;E)B^(V!#.DTW2,*NTE,&B(BE"S3#;)35IF(4G+E0:*H18^%:`*8J]`'S
M^)T*;LH+;$HZA,FJ'R^DGO'R51_)9GCYO*F$0J@3IQFL4EB6#QR..F5SO4K1
M+'.0P>H,PLNHEW#TI)0@]L3B.=/%9)Z7$RW.BIG*T:RM^^+\<WF>%2G%_E#=
M@#,5,XA)=3$W`S<GNFD<E[S]'LRC_M-<-!/2H,[IU>O`:BD$OTR4LY@B.+?2
M3;:,WH$3C6Z",07(5-.A@5.JC`LCLXN14D_FJ6`!6$?TAORBWK9%KA<XC\L)
MCPA<F[]*-<'*-K3_J"A5YZ>3SP/48*CQM.Q68EII9WFCWR1;P_/9K,X&)HGU
MH1K9S.U<ZG&<HRSU$D3LHO3202^4S_=0JIJ+'W&?A_-(*\+;:IK!&SR*8$J"
M=0)E-(:MLYQR+8]Z%2+3N>@N)&TUFV@Q9^>*B41]YH(9,2EGAYB<8K45JK4$
MV4BXLL===WFRO"_B[%2$\LZ!F&H]*S]'RT@''U0GQ:[WB_:I1/TRN3(@\GHV
M*Z2G)"]HYBD65H'@'6#]A4HW0=*@H5>`HX5P'T8$".HJAC8`X8J)51Y7V388
MD(.5.4"W#[[O!"P9V`:C$0,";DZPRIM^!;!8#<HB8@$;%3I,GJ-B6V69HFV-
M&-._?7C4PCUPTLT1^MP,"S<`6%T)/<%Q2`4,0P[8&CI"XV\+GO1VB[K3F1(,
M*H6IZ$[U\%0O\TS#1%H8O617Z_0`V';*RR.]=#E$K&ZV[_(RM;3B'1S,KS]F
ME_Z4T=F*`Z(`HZP,X&?*;+CN)@!N8F'CZIJ#P&3O,+S9B5ESQ.S/;&A_`V<5
M"^SO7"8.&(4<B@,0C'"&*F9DHFAJ%LX8:!@QVQF@&,6K-ZX)!`=-;!+LN>!I
M<J%LK;;%,U'9\\;9T^T:(4C#L^O@&V,[)[`]=@1V:,/-!R^\(\?.96H$S@'4
M(\QZS30'P>6@SW/=D^LMN+FKLC.A;F85MZ(IC0;T3J;]*.F8\_L_.I5I`":#
MQ&,H2QGC[50^Z\.9).2]O!";N7JO[DG>*-Q18<^SS15;ZF4\0M226+EQ7HC%
MV$TMLDNGD^G1>>Q)J8K0ME/K>%I5Q&&D<;,S4.USQE=GNMJ9HW_F0H'(AV(&
MB'WMT,P]V?34NN9$<]EJ@CM'V?K';)8^'*BBC0!&(V@$"ZD05@&^W;`V59"]
MH;U/$<Q?LG@NE\)NGEF4>:K0G<,9M+@'"\2R2)3XZ98@\;/#6B&':%`>.9BO
M@GJYL8[C"H+5W4'MA$-H:U8(J3)>!4;*6BQXCFO&"`X!&0X"66108,+:Z@)C
M+(J@5D:F2+;95$JF#A*GH6((]'(71^,M;.U`9>=%8;%BK<_1[MN;7C*+A[[B
M^[CAHA+?!U8(D')6#D0BE+22%_4YII.HWS`'I0PC#I2\$YAJ84CQ[)DH`7'4
MM?W&:==KQ1"5V^A1-DX7$W/JP6./5FE10YS[@;*"#N3AQ@KWE]<[E)?#LO+!
MO"FGP[QB?W6V3H[^_=W1F[>#']X=/WW=Q8&C,QR,NJV_)(*!V/AC!IPVH_W!
M7+LU]@@7V+YQ*X?P8O917]ZLNPEZ%QH@J@0.Q32&*Y<80X-'W1>!RFJ9[1;@
MDX`4*J:W^X1JEI=8)YF9NJ9]7OU;C,_\.[8*W+HLK)_X$>6%[@-RQCF?XP.S
MI.T<2[)5NHNJ"2UCC*SF>$'9_TU_L5'\G?VFGX28ZKYITDW8R$<!$%HA2UBL
M.W[T/9[KZD+^L`5XA8?B8ZLYM(Y9A:P[P*1/L(N_SM)\+@04PV\M18M36=H'
M<%Q#K)Y0_FNF8_A%.2WI:!64XUR[$A)!1OE%,P#T8C.$V`$T`\"FKQ%`RMTE
MM=`4LP)=;#MS=6RDD#FJ]DZ6!0SQAH)!0SFT$_P/F*JLNMFU)0KY^>`/E=9`
MS,KWK&4A-?7U>E_34;IMN*5<WZ"+ZYKRE0H5H<5^J,Y_6"5H>W82.ZXQ>91M
MVX5*N9/1HM*H,!:<N>G45=XIG"#II?+3SZ]_.H+H3,^>O3C:5I]/7KT[?G9X
M\K-.>'[\T_,GS[FKBAU6/,>@WG&W!J,0X[&YYQT17`EQE.PJ9`9LB\)\2FEG
M$]%2>>:F(EH`"9D\"[2RYD+(%3*%+P/(!.:0P.SR12G]90X:U+D+,P<$-I/#
M;7MR&+\7U/1*VD7ID!FF"I4D)R+8[;VEG)_7V*74V;@0G\,J+^?^!M4&C&UC
M;:A)-IY'=[Q.S<;N*#/P6)%.9OV,:5:=2:7/LBHHQ<9Q:PBTV`P5,]KXVI%&
M@4\HS?5MPVEN'&:WA/;O46B.;F$F!3#7UF$%+(S6EUIH&4JQB-7:2AEJC>R5
M;#*VUFH+!G@.SK&K3`7-H%D?P@>P#)LC:&SL5I9E\!-"R\JLC:F%]P<)#(JY
MZPD/IRFF@-B$&SW/[BYY6H\.G('N)^,2L5!N3S4?>EQEV6\9-TNJ;'Z&B4<+
M^EL[U2'W;7.&;AD_TT)>@9XM>JYM66G=RHN"&[?XY$+L=;!O)KE\L9)&?DO_
M"(PY6R]<(ZW/^G3DC":^7!\DJDPC::4%6G_[2&9BMDS2LM9S:/*Y`>A\5N6_
MB47!!Y/B1RNFO'BN7CUC/!:9=&9%Z9B?;O-@69(MHU,MK^?GQ/_>RA;B2;@:
M-I`.04W%K.7&E\:,Z9WFUQ#_1[;#74HL?TD<98)@SM%0<G^?1@^NR0D)ZGI%
M,Q"U.BK((@0IUSO*H3",6LT<V.)1][^O=>#"S:>6UK/8?%6;E,(X!RG'"94%
M9C1T3K&T.?#3,VJ0\<`BCM";1:E!F)V=`]G!.&B)O9[KTX@BNW0+F,,L/F[N
M?I/-R+`,-:0;3<BG6CTH@']E-9L+9LI&)DP(7?>B&_09]JW!)CE.OE1,=$H!
MQ:(MNN#&(T,IN&3QXOWCC)EU?N2<+'N+0Y-6$5D!0LN(7D78/GG)I%YO!5EK
M;0BN"?Y:T&H-:+MFM^5(PWB7LXKKX8;[6-H7F^N<(JU8+%;&`O<9K,V0KM[F
M1:$WBL&FNWU"&]!0F59M7U)T21>T%S+_,WD[*@MX[$=OO]@@VR^84`R45+L*
M3\2%N][3GU9G-TT$8*8H]L$F:'=F8Z=<TBH;(8M"^4]J&1ZQT[EDI$6,;/9D
MB5U,C4A.%_QSN1BOL'%;=\Z8EEA85VJ,7_+Z[8ENN:[?T//I#'<+$54CJ%RP
MN&2LM)(IN>>]"<U&-5,D=+=9%ZPCW@-VE#]N-20Q07X8P8ZR4K]X.I17,MY)
MT>6NU=X\QB!K<'X30\1XGK>P@=N7#*W7_+@E:95V*4XG'_IPL^2P?&);#:N%
MIK`W@L-E_/Y)=`)P_5!VQ>\,6;#=$1;_ZGK/15./7"SI$5-8CWBP1]ITR,62
M#EE3+C08(IO,B\:VN"ZKX3EXI&-9$&D-I:\%V.PSBHC)]BI@:R,1N^8*Q_IE
MBC=_&MK!KK4&"X2VT*O1'K&ZKM$D9JR),'N(P9U2DN`S.D/XW<W]P[<KT>/@
MJ,%[11,ZLYOX1P?9:'G7,2'*+"M17!UGH_-[`VCKWKS^BGF-R>9)("H2/.=8
M40`%)L(2&VNCG78%XW'8<!IC.N]$J?G,:NG1UPHG&[6C1K4Y0*&L959D%BA>
M="3X.'R,+IMRR&5``'VC\).Z!LC"R-NXI%]),'4=N4+.H!H;9]^P56XUW>%4
M#/W'+&)87:4;."+9!W[2VAT@47WMUM=E-H3`#Y'6DSP1_W5H)8MQ,\42$H^F
M`X!.C%2O'"P.8?Q\;V*H#S@E_=%&-^W3<5&F><75[W.NMN&1",$X]I,JO8SU
M/-J<R,8%N%BD@]^0).6W<:!Q)UO2&X(I9JH"]`W8UH#2K&>'KOG=0*^NA_[1
M7>UZ#TEYERKIPGP?\FW/,\@6\MFG'-R9N$.1%W1%T<8<D*1^T--[`@C<1#^K
M#,13`+A[8#D:NOD:`=J[`KD;ZF8)W#6340/H#FS7')&QY6!_?S4OG^[&ODSI
M[':WC9L1?KF>11WX#^QWX&2ME.=GW",,#S%&63UDKF)H!86;.OJ2"038LI\F
M$NL=>S>J:[N94>%Z_EE&4"K8@T:LCKP>G,UF5A\5-@254@`A''@K.[U(\PF:
MM'%Z\-M-GO>;&]RIZP6&=D,^,(=</B&^J"F-''TV*">+FOY3GPN8A>7MR@K:
MA[^_1W-H.E:B95FEM+,R/5/N_S[L6-1][OO^*#QZGX32W7EV/%2&9#K>"E#*
MM0D0IV=4DW5>`I]FXUEE+IFG8]'=X2I/,W!\AU92=##QHYB9*^FL]<'BV@0=
M)#CD?>OAD7R);<<;&.&N69BW(9/@ZZ]=[7VOWURCE^/R$J[!3:<I'"<;!V4N
M:>?GF12]`?Z5(0.DA!2]I>[<8.>`"%'SB$=UDS=EU2HEI+".3@+OG9/S7>PV
M^Y0N\!@\W//W=Y[>-4C%G,#WAN#R=B[OB-F1UBZ$5CX"%WXS_^7*85WNI?>,
MO)K_E/0?_L%^_F<K.XY2&>TB?];HHA_RJ,#KJ/)658@U\:([1*+O1#V6\F)8
M9>PV/\\;9?$\NKNG\@.N=;AIG6!,$WR;&%?C9$PG>)>>IY%_8PT+A2MF;;*U
M!T"2%D`9ND=SG_LSP\ZEQ[RL##M5BG4UKU*(G*P2FE*P-FHRMD2QNN4T(CJ0
MD\)P=980D(1'+S1J;0>B:50;1T?=6;1'A:/D.8I/P_QIO(.DW5=H<+A46_W+
M.QWZ698NYY5U[LC*<B^R,!?%*+)<_/V;(?+V&?CB\\LA7!!#70:,/Z@F#RB@
MMZ`I2GAYP"3`OOM#!1@ZT:TLPE2I=H'J:'4U]ELHS$^/8>VP_:<<!5<-TP4%
ML9+'X3D6H\")Z`JHGTY.DK>O_@*.Z(=/_X(/_F[SQ",(N_?VY/`U3X4P?/S[
MV;N7+W_F"4<O7[^U$XZ?>5CHV6&>HCW@GSU_>OCVE57'<PCE>/+N]5LK\>WA
MB^=/!T]?G9P</7W[_-4QSWQQ=/CLZ,1.^4$^FLQ37QZ>_(6>1N:IQT?_\>+Y
ML05X_.J9_8VO2Q\]\_KC]>&/1X.C_R-(LML@+X182>8A9Y[L#<2;UT=/GQ^^
ML)-.1`MYRMO#)];GR>&Q0'1R=&Q5>?3J!_RZP@".5DA+X`QIM6&_Z:<,.HG\
MR*X[>5$I70#<*)G/LIH-L]IR(?F8E^R,8#:.>)_A]L7XC*%H/L_GEB,9P:`]
MA&'AU[XA0=_]S_%B&-PG,]^GZ?"C@U%L7/,IW*%"$0FO5%M>,3)JC\9N=@:\
MEC&X[%AHZ0*TDXA:9P8B=,:("E^%ST/7L/@`<(`;(0!'=D@[AC$*J/@S'7(I
M^?LBKUC0*4C$"*$S;]MNC!OZ[FRB+C)_]'W_R(81NYX/NVFP)\L=Z(9S#9PX
M2MXH$XK*\*/2/^020RT6_S5)4IJJ"_VA]OF0\+3Q,G"[[V9(=#K1\:WXHC<\
MSX8?!].\KN&6G76_VEH;Q?S0\2UXAHR_H,+6FDO*RB(GEQ+/.D'1`@2+SFLU
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MX!?M5W\U@<IP']E:/6#/%^_1;$#^KBA(R1T"UW\.)'X,-`JI#1J4&&KZP/9N
MM#9+[HF-LF:SO'/!F(/+%"P`T[3Z&'#-A62(U3.1D5)U_=HOUS/@,YNT@?:M
M-5\Q9*GZLZ*)+C5?2P):&+`#I>0I31"<9HKRR-;Q\/'HQH0OI:(4\300?-*<
M/9@[._Y0NK$KG0'EA=VQIJ+V=5<_3"V&Z]&MI(U--I*-"QJ`])B3RLBO'$WO
MJ"#1G:Y3O[*&F-)8M=)$+FP+D6VLA^#];L%E=OT&&[XQ,=F7Q2D.AYF`VN9D
M3W/IAB//S7VG`3U+;8K9K+0S8+"]^!T#=QZ:UW!_=P'8IO6/CA*\='HU0;*3
MX!6FD3V%(@QL&?>:64R#AMG*9#>S$K&1>KY#%*7W-N"'OBQH>EC+94N`!\C;
MEBAL_':,!&5!$[NG["*;+.=8O?^F+8"U);>B:J,/F)WLGZ@QKJ?(_Y`EED9Y
MB^^<%3"IU"I,1)[7;Y%@^ECH#&PX/;\R#-B/^8%FQ-)1Q84=*.3Q"8;6$#QI
M%#U:R19K;#-YZT8]Q1#HY_\W9AP/P&H&TPIXR<;87:@8PWA%)!_Q(LOF-9IC
MS'1!$[KI3C9KS^%]J5:@53:=75B@P;Q!JET>K>)TZ`T0;IQ0/7^\AM.LLD+*
M,L;UP"4_6_`NMSNRC^?0\:[`R1(3>&91(V2GZ#8:KY;<#=[)Q]>3K,M$IVF.
MFJ16$%QKXMIQOBUX"]#$_[2,:)QS_X!5`C!IJ8E$.3)4D&4/O66_\T7XED@4
M7]KJPW*&BPISN$$H^Y1+?SVX5,XR1K,B`S>[@=1Q6):A4`E,[DB3@0.1AI!V
M`F5/JDN,G&7/&3O:7BGD9[400!2HCT9!2+P2"-+3!8`7A9\NX2&0H&LQEJP%
MWA:+C.7J/&DW-#)]@")1>_B0X\@D+3YJLZ-MMQ1#72S$A!>]!OTJF5YL0]MN
M#M?;ABK3ZLI[458PJ-!JFRV>L[%'^&!V6Z$)Y)LK,E8B>^M#0V$YO;[:.K!C
MQ91^FPZVY8&M;`C]#HB=3)[RJHA\$`%.I1=T:DA&*;84Z@"0HEO894XX,:1C
MPJ/C9V\&;^!)M>.G1R!%:&%^<G)T^)?!DZ,?7IU`:I^G'O[P]NA$)-ZEQ%=_
M/3IY<?CZS>"G5R?/_^O5\=O#%R]^%MD/G6SQ[]OG3V5F[[X\O#(&.Y&Z)^M1
M9W`BZ?Y=3+DZL,G&<B\.WQ[1$W%.&C]HTXG\/--`OCTY>OOTI\,G+R*E7%/-
MAJ3%4F45$YD@D5S*(Q<UWI?)F^X!6)GA.P3#M)"O8I!F%\I!=[*&\RR;T=R[
M!D/M.^O#&:9TE@8/041WJVTD/I1]_,*F%J[RGB,'!^"NL-XR3C':&Z@*S&:Z
M%J]0J3&.`&K:I,@`G!1XD5]GD;_/=*9&3=)\GJ.WKISGKK)BJRC.B8LY+L7O
M3):6?$J^-?A;._=XIX2,L4,'8O!+!CB>9.\_'$0P#$X_VZ1R$ZH"VM^/,#HW
MI>*@)3?#<L<US@8P\_G5B-<(K#A6?^:%4')IV@:7G*MQ5"B"XY@<$1/"8\G]
M.*;HN8O"TW#B8K`8Y@NA4-*>E[?YB["$YKZUUIU7L\79N5!"K&HZ89CDYLWD
M1G"I9#O3/R>[[&L_8=5WXZ="-LF^&.74^:I`.ZQ<Z')\7$-@#UK+W:%$$)%]
MR9!0T<`\`J^CV(BR=<U^2!H5IJ92,4GYAX^DJ*1CJPU=:VP#A%EC+*6TW1HI
MKSF5J!;&>B`LT/59K$ZS3F#1T@LGL%+YT5#TJJI[5GO%:E>"WAD#*?(9V9WD
M9C%-NO1>]UY;+[@55/Z\&$X6H^Q;<%INI^L[)=QPX#\(D3]X^NKER\/C9X.?
MQ']>')UTK3VW[<O>,BZ@C4"N5?QQV8]B_9,6/)Z,ET>GV;S*AW8&FK3JP3`=
MGAO[)5[8_!)6R5\\_W$P'AM='+]SHX7C]\0HX`2?&Y6;$B:H9BOM>8.=6SE7
M1&&5S8NZHW<\.BNO!Y[?%?`/W8[2\-(!0S]X8<&:MU%:`-/K2.U@^4L^#6#.
M#5B_D0`$8VJR>MMF]]=OI@'NT$;)I6]\_X49<VO!/&>IF'.9I[3Y-W#;=44D
MCFS+?@Q=[&U7%)<?!`V>E2F).LHN\B'88P0\6*_L,0@]Q1+V`L_!GP?\KA2(
MV=C3!>C)+*5K4AUO%B=;7&J24L[O6<B[)@-]H6DPRBL+39E*R[0L]L/S%T?)
MUJR,O=^P+7]CP9*71#/4C%THL^T3<#=O/I/+*\?J0<J'2A5L;M\?"0E(%`<U
MWM[Z6,PN"R1!7;09D`VIZ@1%*^]NLO/7#CWG%(N>I8"N[22!A=&<%9KT,BVS
M*IIA#E]8SFE^=I;5,IBUE8.:0-]-%.R++PLZZ7-]S\BIMZ[U[26WJ8N:`@=A
MW@"..XC7>2?QH=M"EJ*A5<'.0V!X&;`1Q#RSS<C9PK8=F+B3;)^NI(VY;*M7
M,%$A_A9"Z=Q4*CM0"5>L2@PMOD$ZL$UBZ.W",+-%$*#U$G,^$!TV8I_6P^"J
MZQ(V>\R7FO4J=303BV:6Z!?,O456A@+72V[CA$B:)H)\-!16YN0O1R?'HM";
MG\`/":Q%S_\++&/W=O?4\JI.:H0*6GWF$I2&S^L@YDZ-9P:F7)%=#ICTA0NR
M1E[J>I8N6BE>,'6E!@ZV*:O*]1GRR60F^N+<$2ODM0-A,"`JNW58/!7L,N]X
M(@)G&[E7LW5$+R.6\X*T7ZOAH-ZBX;"$H$QK&^79T^G2ZFSMLB`-J"'T#$G7
M<5#REAZ]6H*X[P27H2NTL>_]<0IWG:75\!P6H=74;JN<BJF`:0-(-/>\ML1*
M:=NJ\0;F)+/"T+&B5A=EQ<4%7."WGMF8BQ%.*_(9^YV7M)C.+-CN6HU@30NT
M7ISU"-S]XT8`-XFK#P`OIOW6V0"0)PS\Q`;<^[H-F)W^*GK5(DALOFK5A+UU
M7H_::-MCX#3R:;7>4D7<*H;#G;T[NZHYXM,P^.?Z6]@34)N2O:77OSSJ5`<N
MZLK""B+0(.W=;0#9BZ(8B5TZ(ZUWKP%+7X#0W[5;W[8*%P[.82&8P^BS0DB.
M%(G<"T,V?'[1PG<$[]HF\+@4>'JJU+R846I.SSS1'_BC4++R3*$_L')\I`S\
M:7*T,"+=I88[KG56762C7AN@_H%/9V41"I$_,%GI,O2'MAU,3^$G;QA!@VK:
M"\%/X_#]$/PP#K]GDN%Z"Z2?3C[:A(J$(1C+*',V_%@'^D4B+=/1_MYN/#\=
M3O9#W2JSP:%$:*6]0)\6V1Q[U1]_D6.QP&`P+#07#`N+#:R\2F:R7'@-76/%
M!]1UIA[Y<4TWYP+CGJ43FTB?;T[3.K-9TX?!H<$O%9Q=0N8CJDC\H!R==::R
MSBB+#?9>?V"PWGV_]P&KOM(W9ILF\I^2[QXV"J4$(_["BK/Y=%/,64T3<W<8
MGHL&.ZLJS=/N@0<\_>BNT8W`XWP\BT%[X&.@F\[EF+"16H`-BI`V7K>($&][
M3;)V3PV"1"M%TV*:UA\[FD@0^\UR/_&:01V*[7`:R\$F[=IP__YJM4^%WAT>
MS6V:"83VNZ5=`P;D?J,^&UA'P^O*6`BHB5F?7*[6V;%%U"G?"ZUO2Y'X*_%>
M$QJ:7OU&<O:^_C+MU-^[MU9;!V-8")Q5/-%K..;J%9SDVF1`8M-.NSR'HT>5
M2DOEA%RUW$3<)QB95Z+$FPQ*+?!0I/7NM>CUWG>[S:WF3*\%6^+-!2RA#_JW
MDSMW[IBI:(E`L32X<]&6:A8X[$5\TZ3"#],F-+M<^F&"]=R&NOS7&/0E-`%]
MAE@4N>!]QO=Q@!@_N2CNAKC21[/>O+@;XA"#W"BPH;:"+L6:ZG:OSK\>B7X7
M*KR2.HLWQ3"Z2PBCPTQ+2#Q=C)EJ+97$U%$19;+@4)U^=<#5#9M=L;+@B9I3
M,2TY=Q_$B06>O=?,(6Q\EFD?:`#@7HHNY>D0PQ&$SO)\+29H/'"!9I?NS$6M
M;9LTM%"1R:S.`N1)*Y;X/<U'G6"-$F0A=B(Q$*AAM"@CS1<Y?=M/R<[//F7#
M2=-1J91(P7)ACFA1L%RSX$70<D-I[S_$"H7M/:I46RP>S4VE<*LU!H.,`!CS
M`7#X5Q]I#2_5^&XG%'$OI-\*0"'"%V5-*&E/X-6ND4YF9WG1@3GBUXRFWCJ=
MSS]'6`<VT0WCY)(G%_$ZRSX2<9C`FKWA]Y#NH#;3LTS%-%"-\3+STH0G=*JJ
MJ3\3]6#*-DF-QHZNIBUD02U&0TS+V+P7V27DER0>R@`8J3@U[$1'L::)7"%@
M.HM`<7MW/<FRLL.30DPI)*UBR2`M\^$9D%W%!,I\6)O\<*.HOP1CJ5`:8>9;
M%!Z'Q<?NLI)A\103>D,(.M\RG<)9V:SN2R=I-0UVG]M%XUGUT1HL`T`34O1@
M=N8,**M5PRRB,!I/'$VI0'`PEL&T0!.'T10S@F%CXZ[RP>ZVF&)6"KW_S.<J
MD9Y553`]I^-8+UW\[R#`58)*D2,Y!>M,F*2/SV?)9S`WA$K#RUL\%M;+&WB,
M=(9J-@L<!R5^!PVKSZ6[C6@N)V_0RX(`]/[^W0_;808F&\GG8M@)9NN%`TZ\
ME]!+I[Y#/<$#V14>F"]90X+MJ2_3TXX]T?6$YZ-QO]5H6*W;DF&0+<.;170Z
M"BU]WMH<L#Z1<HB\X^B$H:VET)R+8:K$&BZ7P;VBAK,I4@5@BQ>R\`28TEF[
MPIJ$OP!]GB[7!2!(Q8I30R]^7(*!RV$KN>+BN>!B&0[!5EP,T(U$8HCQ^YBV
M"-&I)6;.")TGZ&TPJ7<Y@+@,"\CS63TW\M2?"!(A@-$T<CDP#`\7OGCUP<XZ
MXZI)`U`=A]&RXI)M3$(T@:5HS$PHBF\W(FV>M-AB1<3&5@TC&!=(@M>J3*ML
MSHXM`*KU+DE`1/JB0(V,MM!914M&-=B%I8JA4[99;IB*A53J.)C87O="5OV8
MV%,A5F`369]GDTE(T33[D)&KC8?YSBUW'MS`A/A33/9^)ZXW@IJQG-+S?)2M
M2"KYQ.1*[-DE7<:R*A/;*)R!`6JP<R<^`_"M"1P:B4G0B7"_S71FNMMF_5B+
M:JM'PPJYYN?:Y?VXT8+@W0G@S`-K$BP9-]I]P*:T:5LE;]<N!!04V`Y#(8&7
M:3ESQ438=("@X^6[S,C&)3Q0X,=6S<]!7<A'^HKLO=V62[$G;>5`[IDE[-[]
M%DO85>@TPS:E+8L?%71FV%LGU&Y;IXYB5EA^'7?7N5A,?Y9U4/FJ,ZL&],^#
ME2\Q;$C7-?7R!7CH\H=#6MVSYD[%>),['&C5"15`/.=&LM"5\MLM&MYR3JYF
M9U4Z10]3BO/#PF.2D@,7R^!F#V5S-]IT^'$.T=M8]H9$R\+PLXS0S;_^O?L?
M\*:$Q@LA5>&^/!R,BL*=_S@\H6!X_\!?=.V+?N.M-OJ)MW#I)_AK=BU2\^(\
M/\WG`[%MG%6UUQ*QB9_!%7U)*A\*L2F!B-B2)E<8<<B1X*0&4%X?N!.7Y`@L
MJKSURR^W-"IY\4;'(!B0^ZJ=:Z[CAX!P$PFNE?,<W^S0@X.&"^O--"NK7I1B
M]:EK/W<C9^[./)W52'[]Y6<,G[(EG>?)5='VEQ>LBT==.!:VE.7BSOLC2%$J
MK<Z2FP)U-BWGGP>4\-]3E`VK'!F<_')XU6T#^UF&N0XM*H/3ZRNR,3BZ*[84
M3'KURTCS2\'9^SX#%?C=E(H6@RB#+FZ(?9L)J3:K!O*RFXS++C.\`HI?,)2R
M$^15+;5M067P5[\$3@\@UT2/E1=K\FUV3W1K6-IE<0AQ3Z0LQ/80,VJ"`YSC
MJPAB217JC9L+$3M*D&U.0`UY+D9!BR&V=(KA0^QO^;C37'"@3G.E#/^DTN@Y
MSF,F:TV%8*&1%'Q]@/'(G[\ZAFG;NW?``$SD=\R[S_-4-'?,><!S>"Q4R.WO
M'OB5RJ"WF-\+Y!^^?'UT\N;P^!E"]`,0[XZ?"8BG%'%BM[\7`'ER2`3<#>0]
M?7[R]-W+'UX<_2>"W`N`F%"F"'(_`,*BE"+,@QB:?W_WZBV"[(5Z@]`8F%"/
M4&@)S`YUQY/#XQ\Q,]010\P)=0,N_WNAUHO^?TIQ-G;W0DVGH+R0^^"`<]7;
MYV]?'*DP]S3^5I.?OGK]\P"<K6T8J\GLFG@`M!_F8QJ!7:N5+P[?O!WX#!EJ
M+XT!5?K3T9OG;PCT/AK/=E<.KKIAPC"999_=W=6Q6[OR(!Z#*\\^WAGB:U,8
M%%.=T-.:N7F:CJ0.D>AKBIO:)A#2+A)4_C%7161V`565``R@&C",SPI$?B5U
M4`D*VR=JH%UV-U20;@@XHNZ+%7F.9SGO>X4RY0I@!9^7X:UX91@<WKF)0<Q@
MWVZG9U(B>9G,=$4U13-D]ZKX,T-"%9]8U/',$LY$O53))34/^;5K1PM%&_M2
M&)M,#`E0X=5*5F@@%MK)Q,=.8>^'+)Z)=0E-7IBD.^@Q"BB>E-HZJ*>D>2TU
MK\7?A3=BQSX074^[';K)X5B?FRFKS_/Q7':'BSBO!Z=P`R>M/OL#E*M+IAB;
M;,DPY;7<CCE05ZAK\R':WW<Y?&,_$3R'SQ%F](.>'73+>5-#@;EZ!D078/QH
M14[8Z74/8J6(45N#6[W'2WG!S=V2;"Z75DG1_.1[[(7DSSA-;]].]FEVE42(
M)5U4]2;B9Z/4<0;<#%5/#96\DY_#NPL*1QRWNEDTUF_#T6TP(UO,;3%U:1$%
M`KC_F5N0\B$!&2DN4?<,G[S[0=\M[/4IV)0MJTX7X_<*"IV^9?PV\#?J\BM7
M5H."DXCO[N"-.JN`EL&>F+/%VPH215/+!(="L41<F&YKE`H'9LB5H02?RN,M
MPXGB]<S8>?JP4%<68::.R\Y83%0:Z$Y/_%2CVQD7XDN.;4=`;ULC2].:E($.
MW`_<WX_='>Y"(!.!+KD!`\*UB!OFJ4,5L\1YY!"2#-#.8_[R(E!(RL"5UQ'N
MD".MFI64.N`4DOFZ7>,2U)O.S<$@GYV^W_W0)2([9-04__*LG<<#LCS<?)3\
MWMF%O[N[R3\2_-47[29K.H8[`>2R9PEE256/2P.$Z6.6+L660[/F!RYW>C%H
ME\D<WJB=?DHT-XBY1+>A19<D8_A%+*,BM7#64(J4;*'^G&L5*V._EY'LRWX,
M*,/JHRXD>F[?CE'CZDPB70@<0U@9`()FE\EM+;L`Y/(<'NGLE"#8-2^#10M,
M@3L[,%;`"D.1]%A4+00_K=9;*D<M`P,8"$$"I$M.AY8-D>?$0J5F!%HX3;[H
MCNQ,+.-F]]P9:EAEVT,S([T2EFS*$B3PC4*.KPLGW_0V41X`D@.M@&N%?JL4
MM#ZB=]HL"F_]4MSJ,L]<I\O9E2A&O]+QKZ0*C_,@>0P#H7!E;#0T<]#2R17_
M)FA:Y76\((^CF%[P=09.LD1X9"2E7V-DKD^IZO0AR&+#9(L"SDH[0R']*:"'
M[,EA;%*ZRV*R_.JY'35"BI52+J`T>:7RI+Y$:XT"@O)8"2-82&!1J>?5<%KJ
M=-&C.YMR2XKTF'H$KLWOU?5KZN_'FP=<U%JP7,6Q!%1HV6!K/NTIJXI>4=_\
MIK?_37_?*`7[R3=[R=^^Z8G)LVE66K7\6GVHA.>?DTWY9-BF&-!-*+,970RB
MJH9\''12L,5-<283\6,C9JZ[-&MVT^O$I`B(>TL%+?(),RYN>'MA2_^UK:F6
M&L>#G6AMSCV_ZKA;3;MH?!OJU"!WM`<>26WU1AY78KFJR)OA*)O!K$$ZF?C9
M+91-^Y!IQ%XHYSEZ.YH47A[$\K#WHSQ7!F,/`N@>I*VJ6Q2C=_M1.?#90\NF
M$1G-^:QT*L.*7'SP>G5]/FC@+@FAF,S?'2LC-[+O_OX<A=I-F\_-CE)"(3'F
MV,O.@S;"^KJ[NWL0V)1*,-9Y7"\DS+<A1/G.8]<@$-[E&H2J$XK2"5X(R&BG
MBS]A3>["?E=ER$VOZ4RFS5J5^!VNZAJ+KNP<'+CZ%M9`"F)IJ5!R=<.7V+"M
M?*.LY)E9Y%1!'!]G@$)JF,M/V92(D4(11QGK56^&)-3U.SOT,<HFV3Q+1#FK
M;K\;;4I9CRKI.IH-A)"$%ZDDUPBVV4[N/NQOKVH&YNL^LY.$V2%@6EG*!H8)
M]'R)\P"KH&GLC7C_?V3DF\?]WN[]KS/N\JB0C8LMS'%@<!45>K]CO8IA\`0^
M(C$-\8=+-*CW8+T&!0;*&QHU%C1Z<NP$'.YNU:`%FQ+4'W*F7.4%TT*I<Y42
M>_LVC=AC6J]`C:4?CQ7\.)VGD\XF;0I(\2&([-,PRT9"*>P(E?`4#L0%63!A
M1"LF,Z$^J[93&PUG4MOR(J1T;7D+AU1TDESMD6QXQ(B34O;H@=@CBVFGC/*0
M*GNYJWE<))@3`H>Y19ZNEG/C;J3WN<YA)(1'IB:N%4EZ*RN2J8)"'UB9`62;
M2HLDJ00V4F-Z:G>]3F*:IF.9#JW^?'<&'IN7Y/NPO<)&;.U^M0BP*F?UJ:J<
MAO9:<("[X[*V.MJ@2F\O-[5!;;A*#+7L$BX$ZDVQ<;II&,%OL/BPM/!F<DD9
M7[-O`U5Y(Q_?`.J]IK'K7W.0K;K<O>PZH^H9)\N@==*E=:MD$@GU:Z1<),-<
MLY7MA``Z(K/K-HDE$A50?^TTY"M*<1+66T@1K**VQ9HJ!PA&E[]Y"':DV:[%
M1WCK*W25MCT;Z1E6D.00P1_5R["J#%<S<A2G@!3V&RXWAMJT5TA=(L]J90:6
MMCI8$=TFV_X-,=V1X20U_*MKA5=:;AU8+7@,"\?.#DLBFMQ]MNH:(W:4GQN?
M0&'9A#-I/`']1AUN]#^0[3#H4&%F"^'6S\>(%MN/T.]R4^D-<.;0+XY3H'N1
M@L]%=V6G`<`G%<\;3/[3.V)`0,=0,!&F5V8]92.N*K0_R3!?2K:`N0OCEECO
MFPIM4WNJH!EL7*J!E[XMP[2X11%/T)*WGWS3W]Q.'"3UO")PK)Q;UJUYX@D^
MF/46*FU&X_VA.I_T%,;NJJMN:)\=V`?=X._+B]6,&E0H*WU`MRJ"`^XZTX+C
MGF!3VYW4,JMKGUO2#0GK93X?GHNM&DVW82H&"O8=^TB5ZWZ["4XQL[&TD`NU
M6KH5065JG.2R<NN7W5NDUH_3Q62^;\:P\<A$[NX4*7"N88J:HX[0N.$V(.#S
MN/E+L4DC1R@3Q"C1S_G'[FZ/?Y[>BO3"-[TDK^%]!%+E\$9WDMJ]$3;!1YPL
M]9F"TWE7&X[Q/^`^/+^<$4)_X/4Y/D5M@U^['Q0C!/E%L:P$O?$(25&B&%)[
MRQ$8%``L4:CQ533L>I,0LOHZBS5=OB,!QU*Q3D#!%N9\C`8U4%:\F%WN0'57
MBG3?_Z`3MB#TS"-,5[JL^(DNO_CT@4K,%>41"TF;/ALZ#GRR'V$<H'[SDHA<
MHMY_4*>FC'G80^)J>5:X\N1VTJ<3/@JS[]7T2-;$SA*I_:`3T0WPWOVM_@>M
M@R?3;#H4,D5`;6/1;8/]@.,P/;:EXTQ>*6'.#SE5OT,\:JJ;M=$EY[W"'*5)
MHFDF:^M18H7B5+TK"]OT7MGC=>O#+5@R8YP%((P'`V8LX+C\]NT/ZF3W2L[5
M7$^&R.C0D-HLXXMLN($0$M3+&,:>?2E-/^_,5[U%UU'Y0>94N`A!>`XO6;@:
MY=70,_"XK3+#U;EEP34(4;O<>QSF&\Y=&1^7+XNT+"$19\GBH?I"P:H$?WO)
MEQ?#*L-K&?BD)JL6+0@BNURE,T/ZP"XM@XC+2.YP-]/2V;G55&1)CQ.*VPZ*
MGH\B4G+'*;G3ONA[IFQX`VV\,.Q6M1E]-:?TK(=/"\_7Y`^M$ZH+5G!V(]_-
M%OI8#JX/C=9\_[!IY*Y2]GT,>R$Q=2B):IOXP<[,Q7UCC:*OU#XE5+&[Q.&9
M`_<C%RHW__Q>RPF7*H\,?IQ!\T)-"WMB:$2LG@,#=6OSEH(C5S6OK4P?AS_9
MVDZP7R1LEW2S`F62XS\"?P?A)B(]?_HCZ3$D!-VG&$W*,<B:%XK&?],T&CYI
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M7@NCOD/-47:_`MNP2[(<]9WU4%LC\LVUR)-WEI7Y@EFLF1K+M/ON&FN,NP7B
MMB\7R-M(D(N^OOY:S`IZIK(4!;(1;:1QHZ?OD^$74.F\O<QO;D71!!ZKIVTD
M[BBE6XN\Q`AEK7?FT>@**R<5H>TU.SC&!U*U?^8\3L7^/D,#CQ5#<U0WXL:B
M$^^(K:XHL?.8S.:\^H;JB#)>S684>A,1-R!KV;E)T16#-NP4K@,67=#:3KZ[
M?V\=IRLD#CLN3B*-)F\OF%7CA`^-GT,#5H\KQ#]4B?BQ\S@MRPP>V^.>,SUN
MO:#P.#/YYFY7A\2@YH@,I^X0"'M/V,&J@FW(0!IVL=E%5L'6Z:-B`PIO5*L'
M)4R^9+)9(6W13@Z:TJ`4.S6USU#UR?='&&>$=6_TFQ-9=)]4![):]EB76)X=
MO7C^4C#*-*]KB$T$M\;@7XP]DELW_ID"*'5/$VPIEU?[E96PH_;H*`9S4[ED
M+K!0+2JA\.X\QJ,WQBRYI:061CN=%3N/64\KAQZBQ>XE=@HT*SB3Z"$[K83(
MS>;A\9*9<K!.U6#QY*\R4G_4P'B<</TZ5CPR_5?@EU/!+VJ86S++:>':0T<S
M^2ZN\;QPF,7E@M4.#_%<,!U9L2L0PVQJ![1P3*YV$_X;)K^L4!]3Z6Z':\)N
M8#!!2]MSKLB%R1LJ<(C.-YTF#?6\RWK.P)H\.(M192D47V_WNY4?./7DR6]9
MI9<>Y!(5IN]""H_18CK]K$7'5^6A_V6-CW?`?6H^P_[%QZ,[-T77=QVO'W53
MDWH?G"^JLP686T1*\LLO_[6IY8$1.]S?#%#*[B(`\A&KU,.+--KBO]Q'3,!H
MOS_I^%:0C[K#H\`EAHU(NA6D.FU0P,2!4LU`7X*.,JFA8!>D]+.2KI9O5'H9
MC_&CYDTI7'E<R'E0H>>$N22MJM:;LG#+*D:%:,;\8V<N(XW(@6`EP^HIPS?_
M2+W*2><(FGIV?I[76IOEA>)[COE'VG3PZFB7`?WM;#.L+O#W%29[TS1!=E8'
M>D:HR!"S!8N^??67H^/!T<O7;W^6G27!?Y?PM'6@8W=XTL!%Z'3\AD`_[0@Y
M-14U#,6/H?CW0JC+\SOBO^+W*(=L\5]%P?P._`/U;-A31B#!4",8N!.2_DSS
MA,9.M(.Y%TN29B5I&8\\LIQ6).2X"'0>K%,O'>F)UL%/T3#\N*`GX$7;\%/\
MB\PO6H??],J<0S&XWLE.E@($'ZY7:QAS!,Q-["6[`(@VJY`MW"5;V(Z8'AVH
M,4DLI,$0V<0?TA`;*J-1^J6T<=@I1[29"`\C)3"M`9(#H#VV*'CBI\!B)F>4
ME/9PSAP\3M3N_:@_+CO,Y:XO,F)N`2</$\Q6%AQU=CMD7C*VGR,.".^5HU<_
MN):;`UXT%FANWP+B$>VL'"^6W3Z/.F]1(@$,-=!MPV$C=2;^8J1Y!J`1CXK5
M&.LDF=V(PXND9Y#5F1"!8FF3`8ZS7[,A.&RCTL=1A$M;I'"0YB99!C^%+9SJ
MU$%6ZL'SXV?/GQZVK`?GI%.+E>;.QE?/C@Q>G%NPYN&<I[W2^70&+J-R095;
M*5CH"$9JKI[=,41<YA"6Q<89L]M@9,TZFPE53,Y)SYQIEWIR>.)0PE+:=5"T
M5XI4:(R7:W2..3IR:/,SKDGB>3H9KT^GE-^&%NMLD4.:@RNG17Z&TR+WR*N9
M(G:8Y504R'&EG7L0UER5.>(*-<G*\!;+HZ?/#U^P<0)]0/I3;9ZEFZTZGYV&
M!9NZ/@5I2PI(*#F5VXDKU;O3KEISPN94[6>L5/UBTJ[^H5/M,%+;\^.W1R<G
M[UZ_;8,4SN4\0622'-1,!6B#7!W3.16XR5)@A*W<"L16R`*TV2+()<N</35(
M"WT(Z!#LI3M5/WOW\N7/[><..Q(,SJ!`?CMQR]\RL$TV4<+,C0^ODB>'3__"
M'!UB"))8^19E?YG'"K\]?+*D:!$KZKA^1(JK>R\!!"^.#L6$;BR_:XIRAO1/
MLGI[=[];+WZ`)HUO]-&:3TNH:ZM0?VC`*NR)DHBB8N\/N[V"=NX\3]W]*WCR
M%?OM7%6`/^(Y&T_C=#3XKB(=ZYQ!._C@=8NV&P)^98'1[FMF>H/2Y.:IL,:V
M5-KS&_MEJORIXL[>@=9Y*T2`Y]INW4+7UM(Q!'6+!\0.3Y*_L8:A;AOQL@GX
MV=@%/`\:WX?&+L"]8WS_&!O6]7SQW2-L>,OQ(23%.+`EQ`AT]Y:S<#5JNJ/\
M+)\'M-N&R1(:BG]$Z'MB9H7K/&8#NFYA"O[;F!1\_O;PQ?.G`]&O)V*+J9UM
M8@1N1\5Q>*V:9&.XL)Q.\N%@.*LJC"_>8KVZ&6F?X\#CN_"$.-)SSO&=G=SN
M5FY,OB.3#6F[*"GHWT.\LRA0(\&G<6@SU'JCNR(7;;+JM8=[>Y?[@,^]\;K7
MYJM'KE/\LO79\@9:T2C%'/M7;9+ER:I)Q^8YBUV<(I\J^&M2-9F7OZT[\'OK
M30ZY\MS(OXNNLQT__F)JE;9(,K2Z[OS_!.*DP_XJ]*6A^1-WWB$U;_WY<LBJ
M`YX2LC^Y[1RK1Y#;^DH(^:G;%N[9L3;)PX@\&MI@3UV=Q7^SAX]H;$"=P5I9
MI[DU6G'9N(B:`N$YHNZW_24JS3.WT_VWZ'B[;Q2CMLU=/C199&@R&^S(!5MB
M4;PU;IZTRSS\J:41%W^OS?8!:,DS=$2NFH6/@-@NZD[]05+>ONW(`[QU6*.6
MU-DJG;H#M4.!K=(&4WP`\8`@$+QU[\!;7P+PZ7R6=SC5W?8BZ>QK]'[LAD7;
MBR9+:#QG-&)UWGMA-S]M)[>FMUI/[C8&WT]+YN)/#E5AHGZ[M9WPB2XCR0@Y
M7\Y$Y\B);Q'.QY<.$++\['QN$118F3\&]W$-]V+6D8HO#T_^0M&WFSMGHHFA
M[Q<1-C-^:3K`D#?2^ITWZ%"EHDUN)7^&(=]/;EW<ZFXG-^ME$Q_%!+MTKO[J
MQ-RP!E*L&C:K!8:-/JT<LT:3L6"IXUSMS2!=ITV;X4SL!.++[:1H%A!FN6DH
M%3,PNE?P[/'RKM<%E*O6-^Q64K?8-;MBZMZS6R)`CI<+D(MTL@V/:[05(/A&
MZ=&S%HK2+*`H<:_EM1?D,FZZ/#DZ?-9<N+J.YK+CJRY+A.4)J\YQZ0YV-Y6J
MG7$S+S?>_!05F9B_1%:^:2.[=YNE<CU)BZ5".6HACG1STV9@?FM))R^^\I@N
M54<OVBW,%]=>F"]669C_^L_<!08OCJZR)[RT9X:^0A$L3$4^_;.Z/?LTKU)D
MAG8]_Y\!4<?N==C=^Q6W)C__<[<0_G.X^-2&\R2N58&Z5Y-@*-#Y3+[YZW/=
MU+7>6%'SV!'9Y',R/Z]FB[-SM)`KHFPU)4`\/QEAWBHX2#3*6]/VJDZS%O%;
M9%RXB[1I.U7$:XHH0YZG[LC3AYQ.=*X_>%<?.!G#/*`D!CI2Z7EG[6Y(F`K.
MBM85Q%I\5CAX6QY>+1NP_PI,8.Y>[VP@1EY#KC>/OT1,#+XWBWN%.V0>#Q2P
MCET#DO6]*UFC$86PA_1*$@LAQ/HJNIIXX]YLAFIR#>#V%N95J4"](\JPQZ:V
ME=^Z8VU'K$L*U-/;R:9[*I?D9Z+J;)2<9F*G3Z\P.9R.54?"*@ZY)KFD/?PM
M+.X6SAR6PQ[+6MK<4`[$5DPP>L66SDLQTP36,M;1?5X"=V_2;9G!R<&S0(%I
ME(>T!6QM*:PBZ`C-/:'Y.)K[F/%NN!'N!N7"W)''ZZ(*=>>!(='73C`\F5B.
M9*#:5OT3#,*DSR#IJV=]]:VO/>OKKO5US_JZ;WT]L+X>6E_?65^WK:\=Z^M;
MZVO+^OK&^OK>^GIL?3VROFY:7_O65\?ZZEI?YLH]<"\.@YHF1D6``*>+FL]&
M"+&;I+50$/`ZCWV/:#M1L5S5E.(SP!,8G-5HWG'V%=)]WV5_Z3;(TMX>/G%2
M+'=(IVU^R[[I-;2&2Q(G/NON\HGCW04!WF<(B>WI\IF._7;W@Q$627@V:$\D
MJ][-%.-+X]$H\VEPA(*923J\W*V_R2`Z.L3<T'SW*>3<+0:RQZ/0F>N6%.>1
M585N8#:)?_OEEYNW7))(\GN`F0?H>E][1;[QBFCG/P]VZ,.Z)_Q>F6^],N0;
MY8[#1"SA\&A@;!!<;UM6Q1>O"F,A]8`_>L`6[^L`!G3UPX.5$XQ3+F\CM5Q'
M@(9CCP;/Q9=!7WG0049&)O8A_<4/87&K$>]MLEYYI)0>*5*4<.3S]#2.F+E_
M>MAO^&S^Z@<;BGLD;7K2Q`H3:0B:IF="6J`TV61QQTU@<'[CR+Y+9%X+<"*[
MVQH@L_[:%Y1"`<^-.AN*>FZ"G@L5,!CSW+U!*G8G]![+!B/$!T(9&XF&3N_C
M0<1;.I966B90!GO:O,I&3&M;>IF6[(2J''6,I;F^?/[FS?/C']D%6Q-B5T?*
M5755</*"Y]JL/L%EIC[K@0U8E!*Z7F\M'7(Y-2$TW8O"5X%;9ZJZ!AH.=).7
M/PB@5U,_%KI4U5-S*W=S6X9-,$SV%7O6QB+)PB<TLT\ENE*)7;*@[YM>5Q#B
M]6;78K?&XOO)7$Q,2!%:@Z0J@M)A2;#$!MC2L&)3C^LO-93J&X=-]IU*L\9W
MP\E$1S.99W57.**]C&0?;2`9Q.B:C0PX[$^RR*;7B4U/3$P7+0T?=K2>HJ,&
MT+/E4=9GY7I-Y=QP\P8;OV1I[PV=P['8F#K:KQ6CUR"S[$H!-+HC'73!8-U7
MG(4EH/W>!T-GCYP!\8>OW=W5/RALO@Q7W_O?</4^66N&J^_HJ/)F6G";&X_'
MH%[3\4.L^%'GE[-OF'DI0$-\%KFCS%$YT^KZ$>E)=?B4SP=X`T&]'@T)N'AE
M(Z5[S&?E*)>'=_KZJJ'X!KQ]@Q9Y;!*SU"D"X3WJ,U%-6G9LV&ZHSY-$/CD]
M8&Z<9CB4L7B<P^NQ.(2A*$91'$"!:$Y6U4*TRP?M1K,"#J,D::%VXV5=/5!R
MJ;,#FVD!^\6_!+R->\CDBJ1`BXA$'?D6,HQIUR(&!9/Z`HF&EXDG67$&-N;M
MI+=*9S1=26[J`"#;*M+YPXC$MW'$)K-8E.02(3@4GW-"4QMCXX9GIO23S=)&
MPI@\).&-=L2FA]D':$91<\;B:7E"PIX8"+U<=3I)BX_DG,-1N<GM,'+-"V99
M"=/-H.)J5[`"U[C.)VRP@-U+O";30G14L$<$`JI<P+F\M\=Q4G!5]8#(LNP\
M\66_7.$?%%A]Q8CFQ]`T`O+<V:\W2+3[0'$Y$^KQZ>3S0%K<QWFE9A6>.^;,
M#":?>,/)0;L'!HXG"(M*9*)-&<'H(0XI^$0#\8*?$;#-55KR7\>7<M6G73>`
M&+]0B+^AJSH4R8(Q5.AUJV&7:[WLZ!`^09C,X:#__7`H=0+]"$>N;CS0@:JJ
M%IIA///1S*`0[^^C8>+%X5LGT(!LUJV$!\T.E6*6NS:!84,HPK:ZQJ"K5[15
MH5Z1S;:;:W8%/*R<>K%"E4GK89X+WN3NR_I9"/X0E1^0U3\;AQ$&&_%\YAN:
MDK]]T[^UJ9'!WR9LFAB;L"-UY]0J?EYEPT&K_`?HC,ZOFC!D8:+0#Q0?N/R"
M*W.U&,Y-XD!H0A@HZXN:]>KFH@^RI6)?7>&+USQRK`:F7O[=^4:!)Y]EIET_
MJOHU:7HFGE0Y*UDD6+4Z,60R3I]\)>7*`OO=A;,?D]3:::!AYOUII7`%WH0T
MST"6)"3,&Z^&5-TD*U`4/5]NO:SJOE:MGTL.D*?>(/6R4"UPGY.&!'4!E1I2
MDC+@T(J=[;_R+2_G]G?7BS,;;8#]D#?O6FP\^:X@T;*C$5R=:[)`LQ!!J\K@
M9)R>-`H$2,,`CZ##@I>;N39FEQ/+9,G,$LQ!;9R;]3&H+U@K)2U&2JDCWPE$
MKM1$*ZBM11H^SH4ORS:1IRK0T/H]7U<2Q*NE&1C2(&VFP_8.!!KZU%OUV42A
M#3P15"_*L@+$DA%W[64+35/Z[$JN$_(,S#V(XJX\3J3J<[5/-3M=W!`*TF[>
MM,1D!V"-VPQT4C6CTWT+#LR=-F@QHQW3@)=Q[KP1@%+,HC4=;+`RUOM&)&%<
M.Q7*<6YB$3_GVO)D@<5U/-XQ<:<01^=3?YZK=U0'U(B<@>^93.,WXGE,X0O5
M[=1!FVZ76*=/'<XT?VIX()8D:6"VGG7^P7%XBHV/HEYQ-+IXN(SLNEX%G:^2
M(#_;'0=_#3V,F'%>6C<;0L$$8N^+6+1[)UA\+LJ9UOVG#"0IT79+O1GDA)`S
M?T/K;=N;KC,;=TQR[^NZ^;:"R*J0$IGO`6:+N9"JG?"VP/8\XDU?#;O;&/,4
MVC!R&]F&=^[R^O,D5C%>"OXJ;.8$J/)8S-K+H6FDRBYH@XWRJ%J4&/[&ND,=
M6Z1-/]L7@Y2X-Z$5329;Z]9JH!/@CS50&M3!NQ=V)/[\#TD=M8KRDGP:TJER
M*+0@8LSG$[=]MC3"\H$`A*RWM-ZQ%,^R.(ARL#1W1;%N\`"(GFLA5UE!5^T]
MO&8@F8@3?:/\;<4,UI[;YO4U)*?#TJO.&.^R58':A7<YSI.U"NXV<:S\=-?&
M%CI-2)OQ@]K;6)OG=G`!0?,KA;H5_W7(5#TUFG'KN)\/V@)Y@#?%,+&B3VS)
MGG'%;LME.BJGG./'(,H5I93V0+$=/@+R6GL&_3$,C$,_VGDL]SXW0<NP.55M
MO!&0]P&EQ+HAVIMZ8*E\=QG*ZW=V*&(ID^!BUY`7BXP=&"C#_@IU^$%>30WV
MINX.FAR@GYDP<Q>]=DSD!(2U^<.IU=A&.$=(*UM=+JI\MJCAL`#)E=[$(S'R
MX'-Q8]-9S[W1<=M(IJ0_)?W^@P<KOP*P<C,4;Y&Z-(`G;4!F@;2RY&2@6YW5
M[8LS)HX[@MS#+\%ISGAO6"N8(MD5U=C&NJP6@F9^FG"%#RGT]W;OK]R%[CTF
ML&[8*1T9O%Q>7_(+F)M,OHE'0FNL':EI#'YX=_ST=5*6$/2[[)2EK`0-(+I0
M7EP(]NK01IJP0^0$?5Z$1E*TQYY.9M)TFA6+:?(E>?/\OXY@JO0?TG&E;:6H
MWT.^=GN0Q;7EU*0I.Z=)V=_GN1"3'09H5])/QER$@&<0K"#_.E5:7YUO;+I\
M9LE_R`OT`'7P>+!15OF%V+#L>PW;*N<5`W<;>"YDMYLV3W.\43"N<IC5U`(Z
M)#M'IU@ODZ+>Z%->UD/0&ME!U##1/X(BC(DOR,%_`2D%R1<5FXXSQ7G'<`LQ
M%+1,Q%8K,+Z\:E^"OV1"V#JLY@V:^ECMJI,Y+V-/:O])`QL:K80=*T$+[6CG
M1!6E:_<2:@,1*'I+`@A]@FBTUDA<T07,8PV4W$XX=P)C,T<KA%'/7P3J2Q0Q
M!E)E>*28$PQ@L]NWE=NYZ![P.V'OW,E70)`,VO^KD9%1()'G^)-VZMT0FAK.
M-Y\:[!T+>TXHW'AA5:[-U^9JZ08HJ=$C+FT:9J1I8-E(%[K7=P]"0Q\86J^(
M-S*F(#.SA_B6KN[,4[TRH='-Q*3`T5!^NXD,R6E6GMNWL?#!!CL;P6_YX(>L
MDHT2UFHW<==ZS4X7TL/#GNF1!SN*1SP\A@P\U8%3$H;Q=Y<.FN3L,1I`:*T9
MG!$L&8W"8+8HS#*`?#R<''`N30K\YE@Z8N"I)"IH.+96+?1F"QVL`6=MR-7S
M=[YVXNS&48'=XLY.IP1KM4#:3;[7'E_FX.5*8W&1W/`?]9D-Y9GL=G)3G4R(
MGZ#[%#.MRZL<PX4$8%2-1,XYE6).^2Q:R">:E(:;4UP(.M,[I9#[J@KQJ7["
M\H#5B#1)T+::VB(%?[@]1)VA.D@*(%4?4>*^66*HP1=1`)<@B6$37PS?RN-!
MG2&0X)0S/6D:BN)2=:AJZP'O4]5<QO5;^M4;%$>R<4V+C[&[#-5!X=V'#]<\
M*,0^,`Z'ZIC3%:8()[IG<D>)(JA:CIWD+GM&T)I=RN=?).2!7N8BW6UW.-'#
M7G,B$JSG*F_?5ET:[D)+FOL!D/OW=O?^W^NZ7?)F$\N"3BJ:>Q/<K538$/(H
MJRI,`T?U336?E<N;W1[^)9^08H?M-FRL%[DZ>`I`HC%J2?&U9/#X+:5BH]Z-
M`L2FC%0[=W8*T+9VN[X&A@@:]2^DX[0,*5:Z=KT/E$XQI%P=:/'F<+/RC.':
MACM0(_6DDMY_4N,L7=AQ1RGY"32,)/9O+<=R=@H&C\$H'\(BDE:?M:*4X+U@
MM2TT`%V28&Z8C`K937G[LGX&-'?P,:%Z.^E0?<G65O=F-=6KDYF</-P<3-%[
MO75-RRPL1S7UXW+@(F'ZF?/T+WA%QO?S$3AW'O/9<.`5AI<Z[5$8CR=@[^G<
M'`SRV>G[_H=NT$DRJ*N:E^5HV=?I>O+`?W&.L)M*Y[/+`>VP1TJ;EL9=[;V(
M&K9>H^P)IO*UNJ1F$6Q/9V0/VM]@Q^#8')MPW,MJY<O-M!?M;3ML8X*RF45W
M85[J>G>`+B)$E]DRE%GVT3@S6;J12+"KV=I.R'M%;T/@PNZ\DH;>*WR-V*)Z
M?W^E9I@F@(HD@#KP>AL;F@ZH3'Q<:#--VE(/\J:=6GJ@2/538&%*!-WF@1R^
M=T;!!(`D8<S&&06%S"AX!DFMS!%>SA[FM#2*(S?06H6US6IYWTE_8HW5X/0Q
M\DY2::PC59)6OWH'K,^,1Y)'$V>B@ODB\?JZ3%4FV1VBQ@R%69.E](6#7C-!
MW>5*MM3H%"T6G\#24[HC1Z%(*=[U[BV^PA4Z0*EHLUPZS*N3P?5$CH7\+UP"
MHG1L\<[.`6^NWDL$VYLE\>:I/LB2'5')8\(N;\7)>K5$DJ2P1:9,OD_TN:RC
M.N/2ZZRP>%0/_D?P8;_=Q!Y)MH=:F^=+M8I''FD=ZH[WH619G%ZL&<0].]#.
MG41RA-HE2+4AQL8D]M@%O^OSX1(<K5F5<RKC3MVP>*-<Z4T7(6D%#X6<<?\L
M60^;M%(*?!A0-M=O,+Q^G!C4$83(-%L^MTL0C"J0XI7O"*DV);E)/MU6@FHG
MYB?H=09;FC3AO"I]\8OI,/O?]/?-FB;T&5Y@.T80TXV8A+4O^D6"YYG*]\%)
M&_RQA3)D+7FPIH6T*NM`R<;CHNCRN<;*^1K8%7NJE]]=:M2IG'EQFM;TK+1U
M^8GSUK8R5EH*S^]V`:1'VB2=2K<"EZLX?F54HJL<&QL6Y/Y^O&!M**.E%DX/
MU:,.K)'O!02>EZA;CP).Z"[;LDUZ4R-[(C.?P#C2?NY0Y3:?OR0+E_X0E]%Y
MIV(.#MJ.$3LA"13TQX;LSB%0>=T.3Y6>O'CU]"\@XN_3J9*\:!(B;6M<960M
MU*KCEK)'0?=V,*3BW"B6.I-ZH$-%>.WZ3"MTI`7W]O2AUK68*-B:0*+0C%03
M2<$AL10&#30]"5A<X,EQD3D;=P)88*/W8&]W?5O,#4VP-G>R%H2JA*>BU27@
M!L*VD#'D/2"TM9M+TN*?[R7C@"B'.[I*&NK:W^<?[D@#OZ'H=I(;)<J`(JJ=
MGBZ@5:D@^25'2:RQM,4=#2,/!90EB%5H&0VTV*%UJ7'\+>YF*VRIAJ03H:KL
M:@JL!K5J4FFV'"'JPA.?3B9-ZX)%ETD75\"&N`/DH^$+?=V[%O\PT4IWH#/]
MQ03KBA.]-MU>^[H*!@,-M*J&<,@']GY/70H1N@B<[]9,,2A`,0QV&:I^<@HL
MKU,YT[)5G!6*@%_1R,GCGK0Z,^>1ECU$Y^BS?Y5B;]MI>=!Y4E*J[_W]<*DI
M>#>H/;WE)V!*,J3<A8",F_Y"YUI^OEB-$+]J9=@0OX=<V;`Q2J>*;47J=LPT
M)`9W$V%(C#I8J%]"B>Q-]1H/Q[0"2SM/AV/Q%F!%(7]RC:!P2V.C$`&="8]&
M6,KI=;VFUN?Y>"XMR>K"FCM3..FTH3!TZ&F2^],D,,=\M97*/J;SHQQF!+1`
MB3HS<""FU>`Q&?$K'2;^*F1$+OX1$D*KV&;5U'?!'O;7-H+2'JQTS</V_'1L
M,R6$NAUVN17(V?)8!P2LDR/#MF$S,VW&]9,L-[%_8#>(M-[L@"N07*!H8'`K
MI4X']+2:RE,+F@\QDCBG<*>30@T>%(??_MC168P9/?@E$^*N)TFRLT,4T>^"
M22V@PHM>JGJIIV:J2NBSS5Y/VOV`(Z9]?7#J;D1=(0(_>J)T-Y;9[TS[9E+"
M1K7'+(R1@Q)E#^X9,R#:B^$;:R1KOP"03,A.+7OJ9@2P]?W^NFRM2.@[)/0E
M"7U%0M\GH6^1L.8M2VDGP>8,^_8&&3K""ITL.41T"-_Q$FP_!JLCRMAA.Z\V
MW&H"D@/&1LF.!W?7EQT<8]]@7+O/U`*6#6HZ0!>$[CR&JUP=#'TC:M&?8FIB
M+D!VS$"&>M/O,S+MR'J\.^:L*YDYJN<%J_`OX.DS#^5&%@H6W_&3N_XQVAV*
M*:_N]+$C9::"0?R=C)G;+64/^H\O3(8OM=8F!!MCSL"AG>HP+_X7"TI:BW]X
M8H\2>U9BWXY$*BI;N2=8#*$N'\B*^Z/S4[UPL'T*M0_&W1O3G<<!9V'=J5:`
M.[PJTFA:W,1XNQ"5;92-<T#1*:O9*5QB5.'G*%JF?-,63&#=8(!L_6>-'P:9
MT@WQ/(F);-,7=GB^PZ?;/H&;,8N;==1^X+`'&QG"@X_RE,ZY)NWM,$DH#-*C
M5S(S#__D7G8UUQVNW/DVRN!V%6F6CIZ\-65*6V,\1'N18FM#$KJ6Z%U:51?Z
MT(2?L.N'L6N-X2,%^WZ?Y2).'"P:R67BWQ>S>29OAD^RB\QR/<=+ZQ`#:IZ>
MJI!<5KXA8?,6GRPAK+X#&63P"11KZ97;17(=Q2N/_/[C#=U]\!4@`J0<IQ,:
MX(-)!4VWS)I((L.-9>A--#$8L=8"3J]&Y^)+TT56T^5VC\.?&%K7LZ,-2O=9
M<ZM@](9<\'KW,/`(!:/*?V+,O0%L&&K>,(8XUBYC^O>_+4'U]O")$%16+%^(
MT[(HL(J1F1T4JM2[MAN8!\ZE[*MV@W'5:J2O'-Z?YG2!"78YXO^63'3<IJQ+
M#EIE\.6:Y?7$MIS;Y!^(55B246VCO3AME.'$!E8+9M.=#NV'"))&0@8"J2A?
M1LLOE.VU@I8(.$L(^TCP8YV-?6\;.G7.CFJQ0&('[-*/H3:Z+*$#C#7M"GH&
M#[YCQ.T?=[6XYD[1/.@0O/TCHW;-2V1X`5*S3-FU*G^$`,I0S^.C.=S'_*SX
M*=YVLK?;6]/^'J"^IQ5:GWY]-&R1CJJLKQ_X(?EE!$-SVVY;B"%^9*,@^PI4
M79);.<8A(.E&G-T";T))U:?I,2AR.9,:B4M!3`9,05R*+MI1=CMIM-.*%N*3
M]_@^SQ8)1<PB:/-V5'*9BZF;XG!MQ@1(L!-D>&%R(+0&5,Z/,)>:>#N+8H5B
M^MS]ALTAS7$[;5@IE3T6\X+UMHLZ)^^NI2,G8F!+4:[,*X`!"!Y7LZGHY6H*
M$4)!(:O3N9"T>#8_TWZ"NQ_D2[]D;QT-Q%9#2&2KAUJHP9[F*Y^:I_9'E-T6
M!6*J'WTDMQR7@5`8/D\##'805V+&HO"P,]Q.7&=*^K-Z22L%5TL;Y3KN<.IC
M(:@#"[*]-0HW1IU.8D,8O7^&UV+$,G7KE_16J'D1)U)C<`_H`=9Y"-KW]*8"
MN8)9^*#AZ%S.N6_G\6`P%(!@^A,$XA679,L#H1MC^\D`HDD(<6%S<%='0N&!
MI(/<$-K6XEL;0@#*$M18ICEB'`]T0@??#QWEQ5)IK0V:RW.%Q6".ENUHX<4D
MQ%=V$')KWP9.-H[NN9Q%$*R#YZA=\:_;W2@F;SY*?N_LPM_=W>0?"?[J[VJ!
M$5I:/.TJ'79#ZJ(*CDH[_P$5(P\L;(E\*8?[_K*MMF8L.SB6<1NS?(?:F`BB
M`2J&"8VHMC?HR%#X>@*#F=LP/'8_\YR"Y?,T5=Y79$'!$`IJ#[*$3!.0+K"9
M"`K:$*"UKXQ"65,[Y(J_KA52:2_D-"]FO>TY+Z:Y7GV('4#F3Z5.(X#`U7(Z
MM5KL+@ZN,+#WJFS*!,Z'6:YSE5K-KU!O*2:Z,=7^_MA`QP#6;/Z:3C4NZA[9
M^\'I8\T=K7G;R;NL`+5I28&>7X,6A-:M2WLFV@\Y.!%O(=-Y,)-"NEJ6Z"6<
M;T<S^"=/5[,6_*$S5AOV\*GFKS)]MSP>7'?.[#QNF#(Z<\49`]1!P%L(U$?3
MWQQ43*T+DM/`/+#LNE4VG5WXW&IS9O"=I(A2Z["%_0*+6>*7,[O&-LP;K;5;
M?F_L6@BFW@G>E"N7_K,-34'2^;F3G/RM#I[6VY'>F%IOS\@M9#(K)I_-+E*N
MB@L\Y/CEEZU-S\[OG"YOU6HWY&H>N*.E1#R?4.=6GMI2Y]SE9T-YT("DE/;(
MU5UZZ?R*N\_XZ*3S2R@C^2)U[CD-$KSQH"S*VI>E#XXLX)/B8]C?#V$E!UW]
M!N`F"L"X<UCS0258)AUN67IJ2)%J0,9MU?;=!0P^-X6MCF0/=="E++3L&2@M
MLFL\(I0&XF$]RL_R>:=&%38RU)Z9'EL!_;$#+XIV7?R[B/_6%HI(51V_ZF)Y
MXUG8I>L1..@]1C^]G1T>O[P59;E]0)F#C.X9"=#*LK*9;+KQP_T&_G]_?`/Q
M+7B/*=F!_<H]TJ;UJ&#TA(*Y^<OFIIB_FXGX-]@?7R0?LKMU!Z8'0.RA\Q!G
MM:U2M+XT[K@'>M78TK>?/,8&9<)B:GQ>%2Z"^HMJRTX1+<T[=;=KQ!C.UA9/
M,`0BZ)D7&<[R0K]Q0Z*1RP)6-/0NL-PZX,*@-6WPMP0H&9=MI7VD91[TWUT)
M/JPJ3;/7>H+&L4S*3D4-4`AEM08Z5\$@>">)1$/*`1>^`*$2>MREP=IR\5V*
MTW=BM-;9A:_2Y!@OA#<C3L?(B*04UR7<9U8T4UN=DPO+:"9H)6^-S3L@_#?P
M)H/<E<"L$J/[[.B'Y\='@^-7)R\/7VRKS\/7KX^.G^G/YS^*_*-$A^0QNQ[2
M4CC*J1X]R_R`ZA?&<WUDUPGKF9-!M6L?@8"1(FZF"`;NYL$;E=B2U(%%)PF]
M`@,9[@TJ"6PZMJU*'%`OO5<K!_Q.&EVW@U1S`9QLS!?90&;(BW=!;P%U*6]W
M.[EI8V]S+R_T=Y.3T[4L2FHC:^]1U`--[IS4IHO=Z_%%V*(B6[>6744:_/0N
M8=H8E6"*5I4@A6978DPM2B.-OQ+`-[.QRZYK=)<>[X"AT]M8;NO;A<;>+J/G
MTH[Y#C/.NAHK3AG7TTTZQNA(_Z@-J2S2C^@J!MRWD"&Q<NYJ+?9JT8-_(,_9
M,2LTHZC)^(KU)4*#$LR`P6F%5)\^MMMYB].9/Z+?.RZ!76F/\$%'VL3M>V`0
M108B,%'U04<P*#?]10*FQ\Y([-J#+!3@+6*Z4!L\*Y[[%[+JN7^MK'SNWU4@
MS;("+@-78A_91\OX2"//BEGE>'A9^9Y7*F`.T.V3$1G`R(,4],=7.!_W]48V
M*#><:Q*[UC4)1@8K7+__U;PAP0_\1J[$,<YYUQ%\SB%28.GT8NP.X/R='IN!
M9P*QMYWETUJ66RVFZMUR0"&%/%E!!??0VD1[F#:XPHZB'L_(W5++BB-8(R^W
M_JOUI9Z)=.R(T80;`B%'NZ89C^H,/WZ[JUQ>CU=#CH&!XQ:G69$S3!4>F9VL
M!LW):M6_<H\NN!>:J_3;\L([)FE15+:=O?@%0Z#C)Q@)B]I2!`GM34AMMV2R
M\0E!NS:GQU&\6!@C]Z4@U!'\0`I,GP@L552CO(X9,B-+NO#Q7DZ7(J07/I:]
M4?<"Y[*R3#^V2[I1]_T&!*G&HG5/3,M^,^GI)$_K?S;EMJ]*H`%(E:+?S)YV
M'OBBJNB+@<$^&)[/RF`7Q'K`;TJK\P%EV&HZ(+"/"/BKC-!(H%35I02:-F**
MW0US&&U`@)ZFRJW-L[49-#N/C*=6L./JQ:DTL/#>TQO>@Y6Z$A1T``%UZRRK
M.K1+_6?WL&Y2L)LYWR)Y5DS(A)H-SX;H3@S*>`13@9RHPS+[%08D4=[Z%5TC
M%ANK:\`OQ%6*`,/WCA<ZI(6H\9?28F3HX>U[#%G^2RKD@*M'V6[_(RASX)#Q
MR%S85!/2JXM1"DV6V![Y)#!6MW5V.0]*5].7L3PA*QC.4_VILT0!9VO@D.)6
M%GW3Q#3)O1;`";<ZR;L4$+H]VMFRMQW6!AS^^"8<XB'0`/%(&:8[=)C(W6[L
M@2SO(3?+`&152O5!D]PM/_R9B(86%=+29`)6.J^3N%N(9>3%+V/8FI=;2V";
MMMSSA?[XGF_+VZ#:MQD:%R%BB]`R)+12P"C^"0M1D;&ZCY?V&V,>+/_K]^5!
M4<`1-?%;^8M@6-^@;JXU,7OG465GR9:\O7FVU2T6T].L$DO:6<"\*;K"C+N\
MCTY.$A?I9)%U5!`IW4F093!">15I2FN`\&3T^//_#`5($MNX.,L;37JQ629)
M`^]H^O)JB:R*RBE'1A'<#4<^I=.05<;UAAWM/);-[]Q,#?E*QF!WILP+9A6O
MEZRXR*M9`6>Q@I.J'.[8+O-J$+T@BD5B==0P-R`^#G5>B\.VFI\N<MH8^VJ*
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MMR=<A):S%J&Z[:!:`1.0=T&O\N`Q;CKR*>W<BK&.BU$J++`6)5\VV`"Z3?:;
M'6:"4!6."3_4#5Y7K(Z=!;]0KEWFGA!U4R^@<%W@M;HAN0XJC'[-H7HC=3FU
M>=MCJE'\=ZNWF]R&OB"WQ0,+8HMB8-;#=)+Y#;5YRI`@JPDT2HVSN7>W*[<`
MWR>W[CJ7V+YNVUNV_$J3[K;=:BWNS"PQ2:H.B];#.IP)7O:\;$BBW@#5B:FL
M?TZ8C+TIR-I.;OUFG8;O!R&V$_[DK-3UL]&@G)FG(+K,`,Z##!$=M!)`;^,L
M>8_CI`8`DS[<0HMC6'2;Q82AL$(O<]?<OWVX922L&UN9`WIRVA/,3J0D;(Q@
M![VKEX]C2V&#G`61@7?5:YI;GX@[%%JV_4#`G@6XO)<%BS5@VUD9W4X$G?,H
MJ/7<]=Z#AVL^&^3$WK.N'?L&"9R($!L#*<;IH]#8P?:O7/<\IN;A@=-J^HIU
MU<(^TZ3SRU3:TR%%L<Z(^8%K^IS[UE=6-<:L8U=%U]<E7G+$E5?798D6E1@7
MMQ9!;W`'F:+#YWW]<FBR!;[VCS!=+\R+,?(-",/[6J]0:[6S;2>_\-M)3VS=
M5$%[0F,%5`-?,ZE>%9PX$41M]76D+1.F>S'>QJ+;!OL!QV$HW=)1T2+'[M3>
MV60TH+IEDT/DO%>8HS1)-,UDB=6@;Y)-9'!9.*0%A.2[2,/`TC#4&EL@,-"R
M0$",5T+GL.@*IH/W*JG==:+O.;+5Z+Z=,Z'W?M/K;FXGM,[5PRHOY>/<!PY#
MW)`,$>@<UC%AUM<*DWEB0E.MW)@CC$?<&FP0G<Z%Y_DR2OS0OBS&6T#Z*3N?
MS@^V7Z'2TL_Q@!?2NLK.\MJZ:;9,]MT(;-98;0<;+@MJJX@T2DYFQ5GC;6<'
MFS3><J-T@-'7,K98A@_=P`I#XDG+"IEG;W)C!=9N$A(6*T#M3@"-KR`M;ME6
M#Z>AX<WC-3:.,6.S^&^CL1G,=`1S%6"9RWRDGUE=QB\KK2_,E@F_.Z26>%D@
M@,6WUEMP)<)?(NFF3'`6F8A0M)?P2%^W4`*#C]O81S+7KJ/=72EXU&,I6?^,
MM<![`_Z*AO'.)81!6I0#/(6"##(B?<*#U8L[=%R.X=/`RE3.U'6?._/9`$%7
M,.;F`U$H[7R2-XNP>N!>+?8D,LT^Q%H'ZCUNLF3A/1U])U<'C\KDG23WMJZ=
M*(7>#->Q=$+&))*+81,_6>M5W*JL&H)I7]TA^0;OD)@X.WA)19!1B6Z1#W3!
MQW9R+DUS\$4S-G25V&-3&'3GRH0EUKW]Y&HSW)Z&H8<`]JQCZ!6N.C<P]_79
MF^F`(<-,U+7=807UC*YE6,3:;$!^03)XG&*SA7J5P%$D`G,PU`"B5VT!O=D)
M_*Q8B#0DOEL,SE13S"X@'[X>S!9S5<J(AK6N\+`'UXL!]95@5[%WQ;F@+SOC
M%PPA<X/@3Z_[90-O'^BKS`#641=:#C;4H:-Y&P[G!`9C-B^U\S,XBMM,T?A#
ME<.[XLM(8@\K4(0^C%L41,9(45%I=`!_.OKL!+M/Z%"C+D:XIXYF+0A71.WB
M%6R&`#>M9]%#B*@K.2+85@4[A>+O-[;?&[2INFMI'R_7>4=%\V?.%>YN55K-
MZUP>)C.%PCM'=K9&:P6C,,\+A*)O$Z%"*7.:WA#FQ'(%XF&M[-LS-_0%*+S=
M^/S5L>4T8<4SZ\::V#9&S=!V[<`*3!P1$XS*V3K^\LN?PX:>%?B&*[=9@;'*
MD,<ULZ3#;>ME<6/"=QZ,[(QGQ7Q_?U$3!MCAU*+B05UFPQQ"FDG)+[]C\3<>
M18Z=K%/\1Q!B`\^I23'H@G.<N?3%EB"\(0^#ACY0NWPI$TW3;';KEU^X%=[*
MZO`<%(./F#N=9"%UYRM0CXT.`!D^O0NGOZN5J>N:'&D&L<TVDF>^Z25YG:CP
M:&`HRPO!0/_98&Q`8Z[UUD_+45;\\0M=,=O8V/#IMN\(^#E71DB*Z:UYYNOO
MNBQY@-(NH.*`7G5#*D6-FM,-2W/BY25*/F.^X@XL]O9#9!.VQF;JJ^T-G9OV
M]H;4LG!(_[SDEI&=(2<^VXW/@9O@Z_`NZ.YN+P0,SV"&*/CEE$&S#/MDC(G/
MSDV2F^[BA5?[B9<=.2P#\IHLH4_00Y5X0*"41KPLM"4^Y$R0CXSCG@12#P(+
M.UJIU-(>6<^U>Y@5\'+9JH[(7/>J_7WE[25J%$D'26W<>"7!V$>"WFUPM5)]
M)/-`!E!3I%J##CYPAPNYV'NPE:YQY>K-UF)F:4Z-]])-<7VG7+NUXGN^N0Z!
M@/J56J4MG_9"SRM.FGD)EA_P:<]X%BO`=EDTUD$]@QBJVKO;3'.*HD!:;:UY
M6TU#BYV>[O#(#AR;BDQ'%\7P94>N)U"F'>/6*M!KV-\CAODR#+O+,&!>.L'0
M2O/\@@\3>Q9A(V&"8#P?G%9L<B,<+;Y:.W2FQS"P>*PV172^U"9?'/WP=O#D
MY/"I?@`/_&[U6F%[2<@R)\]__,DIM+,3+01GYZ74XL1BS#\?&]V43F2]<#2J
M<4PW@P/36U]NJ2-.AV"GN0K^BL%;M$;@-QD\5\KC]`5=F9E:992B/R5W>_?O
MKWH0JT>/V.G[1]8C$X7_9+?K(.TP+(5@\3G6-^\K(Y3/L9'8>7()&'X4]`Z`
M&>CK@,2G4)]R=Z[19OXBJW2<Z':G#`Q*.QC<B'H<Z1INT"_52^2B52\FF.(_
MPFZY9.GMQCQ:#^&">HP,474Y;D?%<B1+<5PLQ[$;*3K3135H1\7H.5,&57EH
M(E1I'0G##POH(,Y\Q#>^#N81"VE915ON'G*M$BC'FA--"JWI,T4:F^_P]^?0
MI5)SYH4&2*?(?K+LI(R\WB.],XSVB&UI;A=C$O&ZQZMK]I&VI@ZR3WDM%(9A
MKMR3E@^])P9LSK;@S$DH]UH5&S3,H*8J>2#]-5J^,>0<B/4Z%OE.;C^>&SHQ
M<\[,U"/+`9-\W[D9%KAV$3**+SE;L.P#Z^ZM8G4'3G1,ELTUAG,8T<"!6)TU
M6=8X16"CW72[)&BHU^$Y^#CU.:]+\UZ/CLYZ=Z(&=@W:)]!^$ZAF=3`<XU:,
MGA$M>D)[UL]$HK>!E1O-466"8Q*9A,0==(BEWB9S#]4+/%)?6YI:/A=J[<-(
MD&J9QBLEL'`[,N"&6;SI'A]\R:>K?2U'"8R-.(F2/(567Z:1VHRCNW`=YPX:
M+QP5IVNAL$L[H`8R6)/H`*LVL82I=P+5$1V?ND<OQ+Q=%*?I)"V&0J.YDTW<
M&U_A#G#&W:^XG)7&)A$;9S:BD7&X<K9YJ,\-1EFI;B1[>3A3V9LKU%F4%WCE
MA#\C03L/XZ-N;\U:!4=T9&WPK3YOB[#.H80QE]I$PU_`C&]F$%UAIT*!$"IB
MXV3D'K7^MNL>;H"O/.`=#MQ(VM`GS:,FN@==3EM\*QHD-;8C9;[(NC6]AM98
MYPVTVS/[L6`D;NZ"3*#FUJ*TA;,9^LLO7\3_K[PHU6QB*/.\Q6?PM-OI;%&,
MA*ZHII^G&+0.[2FD!NVLA-99,IMK^-;.#5?<,5U";M!BV^:FC7+D'%^NRP.&
MTB;'E1,>.9X,::CORN]J&3S'[6TV0A0!(K#_9K**:/#E^PV&QSEF*V8)'Q4F
MO^VC>X]MK/;V&+GM!R:L'-A-`E-@7BQ"J]8?T*JO0+NR<L\6U3"S;VROZ!WI
MT.O3NMR/PI]=HH-$YV@._>'YBZ-D:PPWX<8S(90ZSAN\FUH1!QK'.F!T>-:C
M`5O/^7'I1CSSEW#+S1T(P%!I^\DW?3=<&@0QJP@<VZ"0Q8>@S(4\9N-`9W1M
MW*'<FR&SZ30M1I[\U`;5R!F[-N-%7\W0T;AMA_K^7;.=5K[WGM/Y![OHHN:K
MI@S[$0Z&<!!\_BL>;Y0==>CAGR<UQ5[0KVMS<:D)NDU@MY->R/%_B;<]U"*S
M5,^HGTR^AMWHFSL-_H)^^KPZMM=<XI2/QU$2F6BK:KV)EIZ8(1+:1ZUC4,C@
M<8OQ>Y5O/QP>GZTESE:D^;ISE'FA6_.MUVJ^PBP3\T<MH7S^(G7A6>LYLKL+
MF^W)CFKUY!/:KQ2)GBX_F7QN!EA42S`LJA`&`5$MAA!16"S.H-6<SCXA"TNJ
MMJ'F;<`.__E,/E\;9)<NTZJ6R[HLV9%A^[=M?%NGIV9EJX7:6(P[`F;SFU&B
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ME^H6\XZ+EFFN%Y=U;PRWU%7E'-C(9:RZ97FD11^$ZF`DD4^]4U2)>*_!#6*U
M"N]^>J!O%DFQMN1A1;A^^+=O^K?T`XOF<)U)2GE]Z/ND?^^>WH_#S:/;M]%1
MUH&\(>JVKAE9MXN)KM>S>OX&79<HD"K&5<S1(W9'#"L$!@$]9=.2#YNGV3`5
M2XIZJ'HVQO/^)/LTS+)1#>1M>@V0CL+79@9]W8H:K4)4!6]@29W(G+M<OWJ%
M..[("'9',5_P`=5Q&?:_5)=AX#U><))H,Y<LH7YZJGCZ]'20HM>'XFSSY,:]
M>ZB4!)8W?T%#T@/+6'CADMLD+AE0)D`+--7.SDFQ%EH`??[P'Z-4TG'SFQNO
MW^P<CF:GV8Y:^WN]KO5&N%,'QKPT["N4B/EYECR;#>G9F3>X["XP$-G367$A
MTG+1[]8RV$B>E![-[;<(E+JK=*>\]0TN$O+U$TK0=6,(1&HZ:7UB_=L\*D9/
MQ68!AF"3FL]=91VKG%_\B62>)[-/^U"^[ZXQ\E`9]#]?L9#O8=W%M=]2Q[&(
M]2C3V4ST=EK#H;2Y)^,9MF2YOG4CEW$RBV41-*LX5VOE\,,@J[>%:C7JWX@_
MUGS<<V5X@$_2+JTR"+W@1>]V&,!F`D,+-YCI%JAFP79<B,=QG<W-GFJ2UO/!
M7*W(9E-%<"+U7J]_D-Q08`<2`6Y#[`&#EXWG52H(K1)F&D*OK]E\<'IJI8YU
M%8^3O?Z#^P^!T\1W]A&5]1W*W$Z(-T"XF0YF-+.AP5V!1K#[`JZ2R+*L,X,#
MN/H,4A6JA9]FD9"_Z@TA3'!BEHXQGJKNI5!\4'^RO"5@IHHYK&'W.^L0.S"D
M%]QS[=FIBZ\^2WG-_FQ5?YI=>FZYQBFK@:3XE4HLA69.)Y/99081SQ+564)3
MD`'K`[-+_36_A-#0N8R2KRH)U-\U:;X*LLF5,S'001)'HY5,U2%MI)]ZI(DP
M'F-(5XUUAT`U8,.M9C^L09R>WA&II%YX&@)F?H;,@$8A,D4J989*TD976=IJ
MT1&S3XZ-]E_3ZDFB?&6[IV9BI@_Z!D[%6F/P9P``[[S*5NR_KMV3V^V4S0[W
M=N%WY_;LQ]ZX#Z6\^2(T;KC@(#1LEJD*X8-P^OTZI="K(#@R!`XZ/CIWC/;U
MSI#>E/NSW!CJ%8@7.GSY^NCDS>'Q,[?4S:92[XZ?B5)/7YT<N<4&3<6>')ZX
M\/]H@G_Z_.3INY<_O#CZ3[?8_VTJ9HXFW6)?FHJQ8TFWW-72ZO[]W:NW7K&_
M+:\N6.Z76TT%?_KY]4]'WBCO-'?\\8]N@1M-!88N]+`).G.ALR9HK[E'3=""
M/9\>';]URWS35.;-Z\`8)FX)*^P2&A7(/"%/*=&ICD6`\RTMW%5"/^GH5,(V
MO6B)!7,3ER.FK@&_/L7%2F#&PSZ;Z%:71'7`(F-6V3PPX*<>N+ZF$BX`EUO<
M(G0-)@P_]Z#GZ6D0-/$@F\CPFTFW7^7E`T?DPK&"6*<VI^F93&8&ILTN1D@2
M_]_]H-;'\)`'KF*$SFD`P5;-S+":1?ZF(P%:!Q<]?F(!.>E<'C'<\FYAZ4,0
M6MMJO-<REN#!]H$%.QE:.W5N_:=(?W0=:!@P(&IAI6;,T'SW;;'D([?)BQ/F
M3@72;^!)L;S05_-TE+YE+[-_M?/!=8[SE"HB&*?N&-;83CHW!X-\=BHZS=CJ
M`&K8`=1^_G@\@<,C-]EQ0S!NQ:BPI%/F:-SI@V^QMJ>AP@6=0WXP=E1S+.L[
M6,NH1)`9?>&&W2$*Z9L2B8(*N6H[YVT!/5&7YAH:M0/>;T[Q^>;+3<O\<F-L
M/7D1UOUPC+_I"Q5P+VKDX)4Z((P$_`7OR2,I53['M^4=^+!220P#YE=J>-<;
M2OWH$F9X?JQ6:(HEF*3W.65H*ZSJ-'..&5:GHV\U0(_Z_I`X>+L.6!J!ZS$X
MK#J\LUF+5QE'K=;)BI,,JTI/%TD&$##2SW13[=[6A(V/W:G1[@0&6J/]T:G:
M_'Y$J]ZQ&,?TN)EEZ_5-VU<YVLAR&B5%6L-;%NR>W=I"WA?Q<E"Y5%=)),SE
M5]"5#`<<'5W_=]B7O;81>&QC";X5WN)H>HD#FSZUW)7D*QPX?K9'-@\JV/C>
M1L"[T[DZO6L)Z<"K&I8=.<J9:L6PV7'YHQ@Y*<%P[W>.SV`X#]C+H*5&JY7:
MWJ:98>[-EWOWK;LOED)\=SN1X<5RQ2Y6]728J:XXP<VG#O.FB92@*'W8*0/0
M/P5N(^&'=3HIS[$^V8?AXN>?R_.LP(O/A&0X!3MNI0B]VG!+WKIS2Y8%I\VZ
MHRC>WS\Z?O9F\$9L8H^.G](+CT[)/Z]=\L;:)7=B)9^<'!W^97#XP]NCDU"Y
MS5BYMR>'QV+C?2+J#)43FX?U"G;7+/=AS7);;<N%V')S=+;9[5ZC?/7WZY7/
MIM'R[L`&RR\FT?*O_GIT\N+P]9O!3Z].GO_7J^.WAR]>_-S0DN*K84K%*I5.
MLD]?#>'B:V$ZK99C$O^^??Y4X_%"&SK\]\VM#TPPZTW=O$J+&F+8H8#57Y1>
MII58<T/1"5>(_N?>V4ST@P[^%0)3/T*##,?G0A*ZE"J?#N%+V3*?8&]M"[PC
M('W5^0+';\3VDL8KL;V8LT`LL.FR6Y<")0V]"KFB>@4L>,Z\?7'X5MHE6[T/
M'1[?`Y_VJ^#0_?<2:-_LM5^169FD9^]>OOSYZY)$:_L@+T"L@)?N^M21+7[P
M_/B9F.%O7YU\'4(U@S'F[L>86[%WWSFDMR83FP$"T@#I!O.&[FXOX3_+"A%$
M(2II1A**LQ[=(QO9I^T()JD7`AP4,UYIJ!PW5J#]G02X<=G$;[47L*+U8(YD
M&BE@`T%YVES65R/C^NQ3.7IH5H6IX_W+[$G(U=F4>S-0??S%6<!A%BFBW[4M
MA8*:!H?#TXVON?"L&M5@N01WXR8TAP>)7.*D71]K+%FSIXMZGIQFR:P:Y6B.
M-0<7S0+:?V8G7HG<:XIJL$P#9C6R_H8E>)#M]DUHD!D#PG5:NI"/HT&>-W]?
MY%4V,K9ZB%D*G??VU5^$+'SZT^&)Y0YOZS=#??9B%WOS^NCI\\,75DE+Y6*/
M^]DEC]^]?')T<O3,KYF7'YQ^5I?>5>AV'Q6='W*%B)_:\Y<K@VUCP!\"XESY
M!_WR2W8KP<LJ-$F*&5SKKS)]W3G$4O$W<O2`<#W.;M:K'U"%L;OMZ#]>/#_6
M-W#MY^6?OWGS_/A'%D"B@,<1)PF$>*6ET:?1=[]H*)1DGT02//'`7JSP`TAZ
M#[09W@Q$!(_$0@H%(6J2.<8`)`2SE%#9\.-`]@4/5JZL/X$:%(?D?)F)H&EU
M[*6_JOSL7`=UTJDLF.$ZW;]ON;=O@C$/LM,ZD?1:1QRA<)\RTIZ4&7"Y>3[C
M(2QD:'7YHJ$,KGX)726OY*N#(77B#?S*#KV->*$S88$*[)F`<><Q5$?'MXZT
M4?%JMI.;EY)1;9\!0HMJ)N$MY,4VU%RQ`?%B)#","T%,7+2AE4N/EE2[ZF>D
M8T:Y&*E,VGGE2M%I0/M<['J?/QT\?75R<O34N!1Y>/-Y.LF'8KD1P@O-R)U&
M:CV_G`#,R\.3OXCVO'XG/3X"KVHLC9W.7CEHH.;XU;,C-N#RN>."7?(,EN*+
M31,?-JP]+0?7]T<*`#%7%\6WY],9:@$4\)QU%FW5Y=,C#17+I;AMZV!E;FJ2
MY6?CW4X")T4=FF/G,<A/49^H[H!5SZS[[OT1*6YTY!\M2@4_U/GI1/![6HP@
MU%!>U3*$&6K2DEG<!QH:A<^3PZ=_83VN.A>Z!7O;Z_Z=>/\W#(#A+5Y#4+RU
M$VE!0HU\:T`B5`="8;U*=Z_7>[CNJW3!6EZ^?OMSL)Y^[ZO6TU)<+^EV+JD;
M:GMR]./SX\';D\/7^PX9Q\]"R:\/?SP:'/T?(7)!DJ\H]#G)OH&C0=8?OSTZ
M.7GW^JV-!H.]5XMROL8ZP4GQEXC&!>+PV9'3'CE[0;OI_<]96TBWMENBU;HV
M:Y(_8T?=M5<HCYT;%J>F!>D(78P;6'/5)4L1)A7UEDM28W-@-6I$="*8S*T=
MW@%JJO[MX9,H5^XVE3-'-DY_6(NB(_,>?+>>S+MB;[FDU5D-7&T><(&/+^S)
M%N[=B*L3GERK-U6LETH4,K($*$`K0K8\Q>4A$;"8VAD0610A^VO19;`%",,[
M9@+@P$$)OEYZ?]<8V/LF@(I_`(N*]@P.MO85<MER!)+NO=A4<!.`Q6(0:O-9
M5F25V+:Z;0\4(K;4KV71XW,H@6B;*F.;LW1\+0?Z*H!M?S]8A7G^)EC&JZ#*
MZC^PE[F.N$47O50=OOX7)-CIJ:10U,9BFPM""LZHRB/P:[$JQ[<FLZ[9BPJ%
MME+8H0^HN5AG6LQ#S77\H`_<]LMB5DS]KMN02._(LO!:4013"6\TU9U2LBC/
MLC'$)%-M'EX"V-RK4::@;7/K[U!=V?E[4W7YLBJE2-@JF<T\/9U5\X$?0'NH
M#9'V<2C=T>\9]R+O4-+`J=O__ETNVX=NUW&?(P<Z[1L>?C4((<G/:/.=6*.2
M0VC)G4W?CYE5_]_J3SV<9&FQ*`=BB8:PQ7-U0D3#B$_^^9,/8RV!K]*&"II4
M\_A&(O_#`1^R5AVL2NCP&W:\C880&S<:+R9(@0#W9I/'0+L?\HF.CO25\R1Q
MFQ-Z4[G>AE.C;<1H,J%O8F\HLT,F':K)B<1A0EZP?E+C6-OA*FP+*C62G\J8
MBF7+(D]6U>SN)$0IHPB];I2R<Y41?!0<"NXG!)"D$^";S_0N3S9J%_(.8Z5@
M_3+"F6BIQ7[VO6JO=KBQ2P\B6Q'2KC:<`*SUYUJ,`RP-\T6MG]:D1%OB*$D6
MI$:OUS+?LB4'Z+">4F84`-_A=T<A.G`&3Z9KG96,XX(SK,=20"8MJE%^`;U$
M8>CI^2\*2'^:"2G#S3IJ%*5N#LZ,.>I8U`-/7[W^>0#.KVH?$W0?;7?58:V'
M%N7%?1/CTMI1B#T`9K%Q"-RD4$6P!TR/!2XP=-WY!&]8W-M[^'#E-RS,R3H=
MIO^1@\0V3/_CQ\H(E<:(D,$;+_;]:/]:0OAB<Q!5^":*'=L7(NC,)CSP02!`
M_=<)8V76KX!SLQ?4?>FU3/BSCB[1OB,Z<$FL*1UCBA'E!5-0$XTSOUQ*AJQ<
M(CM/*TTF*Q37X(:`9AXX\3I0_](#$KFC$WS*%:W<`N%9I@/IX114"@D$,N&*
M/(/?`F0'5AH,+7;7M@6H]Y_`;6E>U*A"%U*_-Y#[^S:J)*>7MGZUT0D6WR<J
M.[E@6R"Q\ZOX@8TKV1:58W:JMIX[!<Y$?/CH`."C!WB$>EO`+TBA3N-DR&#^
MF`3GEC*J`3UV,W!S>;TXMBZ`'Q@09Y;5<%&%6^P@*<7_Z&("=(!Y';2D5RJQ
MT477<4?HL3WRKN?>3]%2O":HC18V(O"T6VX$D8SGMZ,W$+F1&29<M_1S$2B9
MPLIO_8UF9H+#Y8>MWJ[09;=*(3%VDEN[>OXH=9DAY#HEOW_-0C\!:X5(UK24
MYK',7]W80$'B+8JIT*\QFANHMN-3,^H!(>OE7RVU$(,.L9=W$H@LY'2Y!_-8
MOC3U*^P/G,P&Q++?`G,`M@Y\&F_#]/68W>IVV.-L^T]<P=M?)=]X2E#V$JQ<
MY$[3D=*_H8H$JE#+8GB:VH\3T%*+]Q6GZ9#4%KZC-\_2PHOOZG7WP.Y/QN"%
MYP]OR]^;<P@TO]F]W>,78L0&2F6HU'0.J>KE1+;ZTPTPJ/<.DHCDU2`3!24`
MZVQVE#VG].>UC*Y.&$/-Y"T#_`XI=A=AM]S49%@*R#B=IQ.E?HQSL8F@2U08
M-A%75=52]_*\])A'M,X#A*:ABK;6H75]-3<:;#[2:;BC6Y2RVRQCW9)>"PZ@
M>231[D%SBV[%L,%NA_D1?A5IOJM?-.R^V751(_Y5HZG;?;^\]YW(/F8(_#A#
M7VD8P@/1'(_(G3?R`F4HU%$@"E&(B:DQWLPW3*PZ3HT?2*9IV2%.W=S9M$.M
M=>@I4/&OLJWM?NBB6H_O$=Q\E/S>V86_NT*;2O!7?U=W"5TS-04#EA%G3\3C
M1!%%L>V/)7^\N$Y8-K3?N5I!IE#4SE7$BF6,R>#<`3S0LT]E)>#1&YZ-"21O
M)_XY2HNWE*%HB#*T`2V&&!Y<WJ*E\UR!GIYW8OO@=@\PL`5'8O8$Z&BFPZ,-
M*%P:Q%BS7_*5$I3;\Q,,:3\\KV"MN_7HEEEC2NX/+L..$!/H("7P$+M)PB@E
MDH6\5ZY"XU!3#):;1F]V7`#P0FL1XEBBWHEZ7PK5#W%*HGC(>UC)(;MKZ,7O
M56DN5Z`Y&/?=??/6'%JXHF+;&BD\/^.O,N%%:6@[?NJMC#NZ6`[B@+.0WS&3
M=L=RS.^"JBP;.=5/N6^5TIW6>Y1QE(UA+2'2IUWK.5/%HO(^]G\_@[)^)_Z`
M<?UG<9I;>:DKC[,,QN27W8<:MMM3M51Q-8`V';!$N[MK.LT3_\I]/2PY5V@O
ML)>U#(8^Q*?UMEVEVK=:B1/9=9P.ZIX)\S"$;PH.X,DV\"Q9H7(I6K?D,@4X
M;W;@4V[>=4TAHI0FMJC%7L:>3=7LC"H02QD%;MK81+!]B):^DY[F%[\]/3IY
ME^Q<H@%TYS_HG]&P3G;&XW2:[$PII1`"(]F90:6_%)L;FS3)DIUJ6"0[;PGF
MAU%>)3LOX;_O85FL[]RY\T%`<[]O)`GU.W:P!NO/-,UES*'JS.RJQ,<%M0`*
M5NET(`VUD"&G"H_A5<]'HJD#G#N[_;N4G\W!?LA.^;89G#%">=R(8DJ'ZK:R
M`@M7&-`3'R;T-UA&^'-4Z/ON)HS=A,)-J--Q5EGO/"&86%R'5CG!1WRS#NFS
M<LYB^9^+%6,V6>`=(B&%K:\>4P#4D:4HW:'!@L$0.A>PT^7^?^P+EAKO3_>+
M_=E^M3_:_V'_Y?[;_?G?Z_V3=YO<[FHI#/(I\*$6D1B_[4*_R&U,*:(A&=R+
M8(S^UZR"M4Y..6-)&<NH8M;8;_YX_([>?D\NJ%SR30ULFMAHF($V$F&+_@*!
MF8GXMYKX47:1#S/<*(O=HB9P;K_.9:$B%$\U"O?-TZ92+W4IMLF19V;DCRCF
M:(=HZ4:Q_*"QC,6N`DRE#`$DM<(RU5B83*1"0BFA*18O?:1+Y\5Y?IK/!ZB:
MUXW-/]&%U"R(PUYJ6+'KALY59P'+VO4?9G#S>J62N6G3TI$\U;`0;A%>BVTQ
M_*GI<HQA(DU=2\O]ILO5BQ+UQ]9%"]8F_1J-&N5-C-]WTY5`72>(-DHV8UFU
M[@@S@QY:\@A#\%8C$333!$6,ULM&:62U:(O`5=S=KDO8WW9&M]3%1GKV@\Z[
M5?!L0ZG5K-"4\%>,.)'5BD167XO(T/H7)W/,!"%ZK0Z$:I'C`SO2.N*,QG@I
MP_U=HJ2OVOJ"4**Q<N\,C_-U<S=:T9]U`=*OI.*A=5_FA>OZX3ZX?V_=NP=7
M&Y;.O7GG+=YNA%5$*BQ^H"6]S2!Q/9FE(PP)JZQCTO11SZKJ\W;R/"$;B(J)
M037CCG)0BH[)B^$Y&E4`E^`77T.@K/,9JA(7@2QXM!D5HOPWN/`PR72.3D%;
MA%I8Y%@0R)SY>%"KR'1T4^9+#KHASRFVW%0S`V(\QTMT:3<JUC0@;7\?^Q=^
MRLYE9&N%,5<_?M6*%Y@("7+^>2++=KE+FXQKY0&]SS]0D"NU;L\60`L`='Z]
M?7O;IMDNR)S:O"JP2>@W:E6SG?P*==$L8>:\6"'!QKN;7>N&"U$(H)U?'?+\
M\M*O3OIY*#</VLZ(#WJ;7:@34A]3?5D8SPGE#X*V"V<AZ7@KBYXB9"J06_^Z
M8S*RXB*4+.JPDLG7"W+P'JI=PMA0`D8%FK*X_^:NJ:3R_3G9[&'TSUWYSBY6
MH1\+Z%AI(3KE!9UPP_)J1A+9"J006%>44US(RN&#B\Y77FM\AR,=!3UP"]3>
M_X1PJZV_MB=(ST#V3E!PT3%M"!D30T4:VQ$J0,"1+5^XAJ;6H#1#S53N]D,'
M29NX+E1R0<`IJM<K5<RR<6QB_J:M4\N.DRFRJP*G?030V#$$(HU':F.LRGVU
MYNYDRCE0RS*XHB^6`8P%"-M-)B<#IQ>X/.<?=*]1:3C.AK+@NI'S+O3*PU&&
M,D\,D"CK,OXNNS<@U/V`/[867CJ@"RQ/5O27PO+4+9*;R>_H>?3VU=O#%^:`
MR?)*.CD\_O$(7NBF1-'S]4<=2>0TFU]FF:`N`:],/$5E")5J4\"YBTDWBH:N
M:H!8V6U9K0<Z`#:6I1$AF6#;D"]:SG-8'F@!`FL:?*-;[P9R'Y@.YU/!>Y`'
M]Q0F"'"33&&.`7MS="F]L>;SG<?SZ>!RE'Y&`V48^K,-/1708<CIS(&<%7&T
MG[.TDN"][W;!MT.6@HQ(D<K&'X?\MW\3D(*)RGPDC_:6+#Z'T>=W])^W-GF[
MQ648O#]<UU8NI==!-;6"2[><8;FY!+$YJE$KAB9SFXT-E`(0'07$@4:9P81"
M+81H:A#%8/(S&-&S8E9E@=P*,,B7Y&,8J@)A4'V*U@*ONN9CE1""R`@")G`#
M6#818$M@:I@$=+X?R"T^;9(E'L5G`*"$-J,9;L`6)H<,J$+>B182-P0Q!"+$
MI&`WIT.5*3`[1F(`<@YDJ6<#0A5"NW`1:.@]P-'$#:<3@#B=I,5'LIK%`.<@
M"'1DL2"`V)YO1\.3A;CU%+B57QH*]5<.@V,N.`1`AL!KVE$\Q!\@3NW+`@$H
M?(B8+(=A-$.,*;:YS4*IA2H[S\?0$?AO:/:,</:(G6^<E&&)+5+FU!#$.8IR
M*0^:V*B2H')2-X&>@^.P`'7C;`5`46T3H/AO0TO06*'AR-F\H=UJIZ\*J(2&
M,ND$I><D3^LXERO+)/"ZME(VT'$^PQ$0_T1QUHM3DM4PUNIW%)H>T-W<EB_I
MQB4X70J#%M&O*"3H.]!/3,<+0('_B(#B#QI$H%()EC;U"_AG0\?P!PU"M$'\
M<"".!_Z/P4TUH!4P/BABQDK"L&L:UA[82'U0C$'PP[^-.`EN[L`%4$YQG>'>
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MY[&:Z%3(QEW+!N(_)N(^)*)\I76`87F`=(-[2&\G][Y[<'>]PZ3P>R8=/[D;
M:*1\TH6%3BTM1U\[Z.?A4T$BOI4%L6>I@T81QV3ES:1]`1L]]*9BL=;''-(6
M1_<8-BCVHPY&9(6,Y$$ZE7,B,Y`G6^(#7;"D\6XV&0U\1PLG!<CP@;2C#>"P
MGFIUWV:U,^']5DA5+I(I^"NHF+STG@S==C>L`3!P%`-<\=W>>EQA]8(@67Q#
MO7@_U<T7OSO84=AR!`$'-0FI@R#AY?PI1KJ2IY$86@\[1/S"<Y^/U$M,?8'3
M97Q_&^8HV;Z<%W"VZMSV?-/^S'0!9U/7RD+*;F,?*K[UG*/KO$LO#3O7U6*1
M_*U+!ORNF!=4PPW6&R`.[;;J[#7-"_7RICE_YS<>G"<._%<-O(C.[/0>H'5D
M0S5_3+14-78"'Y"F;'_F%H;5<W*3:X^6S:KJ\@Z-MQQYBVV(U\)S*##]_`GC
MS"]FG"^XY*5&HBE@5*67%`--QQD7;(GG#\1OXH=S<?L&)8XRU*XS""/>I8$=
MS?0(>_'.6>A@F*"(0]]3B=U<X;;V9BX$R8LXG;O<*L2RZ\=A74>V(YA3)&<G
MB'F(N<@U\U,YR^FXJZ<])<XORC0')U/(DA.4TM[K`A\XFD(CV;629P.\2'CA
M9C#71)64JP]^TLU[VWHI2G4=A@#1-'6M&]JJ%8*K5$/PWP,&T]1"*PH*>\"*
M[H6*?[XW-1_0J7N2.*C?__J!^%I]<8RF\^T0*MSO6A4UN5=6!]R`XR>*E]RY
M297D'^Z<QW>>*M#WK?$M'O?[UAQ?'%_`@^.WIK>Z=E?2>/4XB<YE?$/5[=N2
M&TRF&W+?=(^@%9CCK[L'5JNL&6%1PEFJ'3VZER[<7KK8!B_4:S35;Y?*6T=:
M-*P#V`9!&2?5#T9+?^3;--&^3:J\FJ."GA[><U<]:;=?BY[YY4R+G5I,D&PD
M)`Q,`GL]D\-BI`C/N(KW(I$Y7$KFC65TSHI,T\G)'.;5<-*64,6/NSX_MFA%
M]L=U=C:9Y&7]U?H[;:*TWX;2\6Q1A4E-JV&<S/Y*9/[NDZG)"A&578A57]Y4
MGXW#Y-6ES[A.Y=KEK\WDUZI'LC728>&U.@*S<IN8:EMU0ZL'@)+$"C2K'=<Z
MW"^=W2NU%P>I+HT*5R`Y\4LB"$P,`N]Q!:E[R0/\+QOV?1^PY*E=$E@[1!'M
M6$">8K`.0JDOB3J#P8TE!*)-KK8I`^,'J!QTB]!9ZCP$L_"U.IV%FIS*>G;T
MXOE+G86'H)A^]$(GHG>B2G_S]/"%J47Z'LL\BI9KRGT6*OTG7?#GX[>'_ZDS
MYW@H1\X3AT],B^`YAIU3>81"[3)Q<#68?D8AX4]LZ&Q4U54F!K$Q+41U6;<2
M8U@;BDM6+X;6U5G`5RKGAU?'!N$HUUWYW-"7#C5MAT]-ZS)-\LD1(U>G/C>)
MZ42/!7J7@&M,1]7S#X/['QI?5Y>]M$N:@<?I"N$&-2_]@XW</PRS_,-TP3]T
MF[$"=K\,H]^0#4<9/\(WIIVW3-6L`C<FF*IB-;=XO_MM*-5X&D-1?AO2NH!M
MEQ%:"Y)A10&1\]2#I(G8$/3%N1<1;JR:TLDCMW,01FVKT,:)!%D.1?]XE"@R
M]-Y5"NU%\;&876JZ]55WPNK>*'9N8OP1M,+=]:]"+)ZI3\%41:6ML*WP\,J\
M>2F0UJRJ`I?_F^(_O17A^RO"[YDH1>CA`IXT^DU>NH)GFE!6V3C_A`)]4\P"
MZ1,S(H-"-]DDI@Z%2J%90.6[R>U$QDNA+NG*O9$)ER(!33+%2Y'@!WP`97RO
M'_'&*W98@MV08.,(U(F9<N6/LAR;$`(QPAG<DT3``>Z:OJ!,PJ>0CDY.7IUL
M)S\<HG@Z\&X:ZZ`#JBRJ!^$Q:LTLK;FD-7O$^"(4K5BM]G3ZIV:6<Y4+HOU!
M<[^GKG'?T\`X>M;E)RD$N6E*`S`3#FI&N3Q[[-QD@56(''4MPD3_VU5E30`7
M.>YT>7;SF][^-_W]A$7*VY9MZRIY0$9R=EE5!<`-W43\ID9D%CB:I,)OB&#_
M[$M\&%`7[W00OR$F_X:B'54>>3`465]RJ85<3IMEB'&.J"YJF!W-07<C5RSY
M6V2,/6(A>C$"N9SM>JG#N61S\[+YLVS:+)LM3<*S(W;YUIHB+U883W:2!%IP
M-/:I';K-DE>^SW*KE69)VY<T/=9RW2PI!IO%*%)+%Y;^>ZE%GFM/[4!,W'.2
M.NJJ;"<D&+>96%RVXUM5,5A=-5A=.8CW7%30?3/:3UQQ%9:B?Y0LB0D-,S7^
M=_@:A^^_9^#$"+&3?7W0ZQ_MVT\[ZO=<G"-V'&T\`P^@"AYXFVMO4J*R<^4N
M1@%AY\PE4V;YLZ,4$:NQRNUDJ$+5T,N/I5[35+G]??2USHM1]HD4E@V3Y;:X
MAH"HUKO,7?2PPW]##U2;9ZF/7QT?=8&'O%=AH2P]`@R_Z,J`SBAF8(Q:%"/X
MVD@L;T+^X#*X!'1TY"IJBVD8W`'G#RM3ZX)OU#KO\LJ7(1VH!$/)AS&&WN<F
M;P$,QS&7)X8&"D_G44?S.U#DV5UX$.L#.'N;QV@*#0TR@4U4F(#A@4?O[GID
ML+$-=K/)UQTLG1AL//ID&/T;K(!0^FK9`:7!!YL`>(LL3)R\^<FBY^H8I+AK
M0!8%PX)ZS2HPE5B@,]?[AHK?U*6WD_M[]_KK.N#0Z;0,NP)F`)J?[XZ/#U\>
M/1N\^?GEDU<O.IL[.WCY#/Z8P*-RV6@0DGR]!L''WN5BW<2BY5`1Z8E%!J'^
MO?L?#M3[!H6.`EN(S9G(BKRW;6$HY`Y=/7]K7C//7<EHMU_;N91'@;K<JS.<
M>O1,5"9I]F"N=Z2N%H&Z(Q]7*=0^QFD,E^U-7:_%MKHS^8<U>%G]X.K2;>@'
MR?=T-YNN9<](T-H&LJD)5ZKZ0ZV!Q11#D>EU$)MFA1]X+T!V/X@9L_MI//Y@
M;88IYQ&Y.B$W3<7*[F(++-FBI+ENIW<U#=!FRVB]]"[[@X(>N[LCZ'RZG0D=
<8G:1LKLDRZD.\Z.$1V9<T?70_O_-2Q+DE:`#`&B]
`
end

Re: Disappearing labels fix

[John David Anglin]

> > I thought that I would try g++ version 3.0 20010503 (prerelease) on a
> > real world application and ran immediately into the disappearing label
> > problem building groff-1.16.1:  
> 
> Tried again with today's patch.  There are now more missing labels than
> before:

Your latest disappearing label patch has fixed the problem building groff.

Thanks,
Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Disappearing labels fix

[law]

  In message < 200105181558.LAA14748@hiauly1.hia.nrc.ca >you write:
  > > > I thought that I would try g++ version 3.0 20010503 (prerelease) on a
  > > > real world application and ran immediately into the disappearing label
  > > > problem building groff-1.16.1:  
  > > 
  > > Tried again with today's patch.  There are now more missing labels than
  > > before:
  > 
  > Your latest disappearing label patch has fixed the problem building groff.
Great.  Thanks for following-up on this.

jeff

Re: PATCH: Fix toplev.c breakage on PA after eh merge

[John David Anglin]

> Here is a possible fix for the problem noted here:

Just noticed that there appears to be more stuff related to the assembler
file that needs possibly move up.  Should init_decl_processing () be
generating external declarations at this point?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH (revised): Fix toplev.c breakage on PA after eh merge

[John David Anglin]

> 2001-05-15  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* toplev.c: Include dwarf2asm.h.
> 	* Makefile.in (toplev.o): Add dwarf2asm.h to dependency list.

This is no longer needed.  An equivalent patch was installed by
Andreas Jaeger.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: fix argument promotion

[John David Anglin]

> #include <stdbool.h>
> 
> int f (int a, int b, int c, _Bool d, _Bool e, _Bool f, char g)
> {
>   if (g != 1 || d != true || e != true || f != true) abort ();
>   return a + b + c;
> }
> 
> main ()
> {
>   exit (f (1, 2, -3, true, true, true, '\001'));
> }
> 

The above code exposes the bug in the existing C compiler because cc1
currently promotes boolean types before a call but doesn't demote
them in the callee.  The test passes with cc1plus because it isn't
promoting or demoting booleans at all.  If anybody has a brilliant
idea on how to test for this let me know.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [v3] build failure from automated checker.....

[John David Anglin]

And another one:

/xxx/gnu/gcc-3.0/objdir/gcc/xgcc -B/xxx/gnu/gcc-3.0/objdir/gcc/ -nostdinc++ -L/xxx/gnu/gcc-3.0/objdir/hppa1.1-hp-hpux10.20/libstdc++-v3/src -L/xxx/gnu/gcc-3.0/objdir/hppa1.1-hp-hpux10.20/libstdc++-v3/src/.libs -B/usr/local/hppa1.1-hp-hpux10.20/bin/ -B/usr/local/hppa1.1-hp-hpux10.20/lib/ -isystem /usr/local/hppa1.1-hp-hpux10.20/include -nostdinc++ -I../../../../libstdc++-v3/include -I../../../../libstdc++-v3/include/std -I../../../../libstdc++-v3/include/c_std -I../include -I../../../../libstdc++-v3/libsupc++ -I../libio -I../../../../libstdc++-v3/libio -I../../../../libstdc++-v3/libmath -g -O2 -fno-implicit-templates -Wall -Wno-format -W -Wwrite-strings -Winline -fdiagnostics-show-location=once -g -c ../../../../libstdc++-v3/src/complex_io.cc  -fPIC -DPIC -o .libs/complex_io.o
In file included from ../../../../libstdc++-v3/include/bits/std_complex.h:43,
                 from ../../../../libstdc++-v3/src/complex_io.cc:30:
../../../../libstdc++-v3/include/c_std/bits/std_cmath.h: In function `double std::pow(double, int)':
../../../../libstdc++-v3/include/c_std/bits/std_cmath.h:419: `double std::pow(double, int)' conflicts with previous using declaration `double pow(double, int)'

I see this in /xxx/gnu/gcc-3.0/objdir/gcc/include/math.h:

extern "C" {
     ...
     extern double pow(double, double);

     }
     inline double pow(double __d,int __expon) {
	 return pow(__d,(double)__expon);
     }

Thoughts on fixing this?  For the moment, I just commented out the
definition in std_cmath.h.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [v3] build failure from automated checker.....

[Benjamin Kosnik]

I don't know what this is. 

> ../../../../libstdc++-v3/include/c_std/bits/std_cmath.h: In function `double std::pow(double, int)':
> ../../../../libstdc++-v3/include/c_std/bits/std_cmath.h:419: `double std::pow(double, int)' conflicts with previous using declaration `double pow(double, int)'
> 
> I see this in /xxx/gnu/gcc-3.0/objdir/gcc/include/math.h:
> 
> extern "C" {
>      ...
>      inline double pow(double __d,int __expon) {
> 	 return pow(__d,(double)__expon);
>      }

I don't think the above is in C99

Re: [v3] build failure from automated checker.....

[John David Anglin]

> > extern "C" {
> >      ...

Missed

#    ifdef __cplusplus
     }
> >      inline double pow(double __d,int __expon) {
> > 	 return pow(__d,(double)__expon);
> >      }
     extern "C" {
#else
     ...
> 
> I don't think the above is in C99

HPUX 10.20 is definitely not C99 conformant.  Should the above inline
be removed with fixincl or can you do something with the v3 configuration?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [v3] build failure from automated checker.....

[Benjamin Kosnik]

> HPUX 10.20 is definitely not C99 conformant.  Should the above inline
> be removed with fixincl or can you do something with the v3 configuration?

fixincl please

Re: [v3] build failure from automated checker.....

[John David Anglin]

> > HPUX 10.20 is definitely not C99 conformant.  Should the above inline
> > be removed with fixincl or can you do something with the v3 configuration?
> 
> fixincl please

Here is a first crack at a hack to fix the problem for review.  I have
checked that it blows away the inline.  It's a bit of a pain to to
develop hacks for hpux because of haven't yet been able to build
autogen 5 on it.

Probably, Bruce will have to install it.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-06-13  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* inclhack.def (hpux10_cpp_pow_inline): New hack.

--- inclhack.def.orig	Sat Jun  9 16:12:03 2001
+++ inclhack.def	Wed Jun 13 18:42:01 2001
@@ -1119,6 +1119,33 @@
 
 
 /*
+ * Delete C++ double pow (double, int) inline function from HP-UX 10
+ * math.h to prevent clash with define in c_std/bits/std_cmath.h.
+ */
+fix = {
+    hackname  = hpux10_cpp_pow_inline;
+    files     = math.h;
+    select    = "^# +ifdef +__cplusplus\n +}\n +inline +double +pow"
+	        "\\(double +__d,int +__expon\\) +{\n[ \t]+return +pow"
+		"\\(__d,\\(double\\)__expon\\);\n +}\n +extern"
+		' +"C"'
+		" +{\n#else\n# +endif";
+    c_fix     = format;
+    c_fix_arg = "";
+
+    test_text =
+	"#    ifdef __cplusplus\n"
+	"     }\n"
+	"     inline double pow(double __d,int __expon) {\n"
+	"\t return pow(__d,(double)__expon);\n"
+	"     }\n"
+	'     extern "C"' " {\n"
+	"#else\n"
+	"#    endif";
+};
+
+
+/*
  *  Keep HP-UX 11 from stomping on C++ math namespace
  *  with defines for fabsf.
  */

Re: [v3] build failure from automated checker.....

[Alexandre Oliva]

On Jun 13, 2001, "John David Anglin" <dave@hiauly1.hia.nrc.ca> wrote:

>> > HPUX 10.20 is definitely not C99 conformant.  Should the above inline
>> > be removed with fixincl or can you do something with the v3 configuration?
>> 
>> fixincl please

> Here is a first crack at a hack to fix the problem for review.  I have
> checked that it blows away the inline.  It's a bit of a pain to to
> develop hacks for hpux because of haven't yet been able to build
> autogen 5 on it.

I've got autogen 5 running on a different platform, so I'll be testing
your changes momentarily.  Thanks!

Mark, if it fixes the problem, may I go ahead and check it in the
branch?

-- 
Alexandre Oliva   Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
Red Hat GCC Developer                  aoliva@{cygnus.com, redhat.com}
CS PhD student at IC-Unicamp        oliva@{lsd.ic.unicamp.br, gnu.org}
Free Software Evangelist    *Please* write to mailing lists, not to me

Re: [v3] build failure from automated checker.....

[Bruce Korb]

Alexandre Oliva wrote:
> 
> On Jun 13, 2001, "John David Anglin" <dave@hiauly1.hia.nrc.ca> wrote:
> 
> >> > HPUX 10.20 is definitely not C99 conformant.  Should the above inline
> >> > be removed with fixincl or can you do something with the v3 configuration?
> >>
> >> fixincl please
> 
> > Here is a first crack at a hack to fix the problem for review.  I have
> > checked that it blows away the inline.  It's a bit of a pain to to
> > develop hacks for hpux because of haven't yet been able to build
> > autogen 5 on it.
> 
> I've got autogen 5 running on a different platform, so I'll be testing
> your changes momentarily.  Thanks!
> 
> Mark, if it fixes the problem, may I go ahead and check it in the
> branch?

I'll have it in mainline momentarily.  If it checks out there, I would
add it to 3.0.  The patch is extremely precise (i.e. unlikely
to hit innocent bystanders).

Re: [v3] build failure from automated checker.....

[Mark Mitchell]

> I'll have it in mainline momentarily.  If it checks out there, I would
> add it to 3.0.  The patch is extremely precise (i.e. unlikely
> to hit innocent bystanders).

OK.  Apply it on the branch, too, then, if you would.

Thanks,

--
Mark Mitchell                   mark@codesourcery.com
CodeSourcery, LLC               http://www.codesourcery.com

Re: [v3] build failure from automated checker.....

[Alexandre Oliva]

On Jun 14, 2001, Mark Mitchell <mark@codesourcery.com> wrote:

>> I'll have it in mainline momentarily.  If it checks out there, I would
>> add it to 3.0.  The patch is extremely precise (i.e. unlikely
>> to hit innocent bystanders).

> OK.  Apply it on the branch, too, then, if you would.

I've gone ahead and checked it in.

-- 
Alexandre Oliva   Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
Red Hat GCC Developer                  aoliva@{cygnus.com, redhat.com}
CS PhD student at IC-Unicamp        oliva@{lsd.ic.unicamp.br, gnu.org}
Free Software Evangelist    *Please* write to mailing lists, not to me

Re: [v3] build failure from automated checker.....

[Bruce Korb]

Alexandre Oliva wrote:

> I've got autogen 5 running on a different platform, so I'll be testing
> your changes momentarily.  Thanks!
> 
> Mark, if it fixes the problem, may I go ahead and check it in the
> branch?

Patch is now applied on mainline.  I'll leave it to you-all
to apply to 3.0, since I cannot test HPUX.  :-)

Re: [v3] build failure from automated checker.....

[Alexandre Oliva]

On Jun 14, 2001, Bruce Korb <bkorb@pacbell.net> wrote:

> Alexandre Oliva wrote:
>> I've got autogen 5 running on a different platform, so I'll be testing
>> your changes momentarily.  Thanks!
>> 
>> Mark, if it fixes the problem, may I go ahead and check it in the
>> branch?

> Patch is now applied on mainline.  I'll leave it to you-all
> to apply to 3.0, since I cannot test HPUX.  :-)

I've just verified that libstdc++-v3 builds successfully on HP-UX
10.20 with the patch.  Mark, ok to install it in the branch?

-- 
Alexandre Oliva   Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
Red Hat GCC Developer                  aoliva@{cygnus.com, redhat.com}
CS PhD student at IC-Unicamp        oliva@{lsd.ic.unicamp.br, gnu.org}
Free Software Evangelist    *Please* write to mailing lists, not to me

Re: [v3] build failure from automated checker.....

[Gabriel Dos Reis]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

| > > extern "C" {
| > >      ...
| 
| Missed
| 
| #    ifdef __cplusplus
|      }
| > >      inline double pow(double __d,int __expon) {
| > > 	 return pow(__d,(double)__expon);
| > >      }
|      extern "C" {
| #else
|      ...
| > 
| > I don't think the above is in C99
| 
| HPUX 10.20 is definitely not C99 conformant.  Should the above inline
| be removed with fixincl or can you do something with the v3 configuration?

I would prefer the above be removed.

Thanks,

-- Gaby

Re: [v3] build failure from automated checker.....

[John David Anglin]

> | HPUX 10.20 is definitely not C99 conformant.  Should the above inline
> | be removed with fixincl or can you do something with the v3 configuration?
> 
> I would prefer the above be removed.

I am away tomorrow and part of Monday.  So I can't look at it until after
then.  Unfortunately, the problem breaks the build.

Here is the exact code from the header:

     extern double pow(double, double);
#    ifdef __cplusplus
     }
     inline double pow(double __d,int __expon) {
	 return pow(__d,(double)__expon);
     }
     extern "C" {
#else
#    endif
     extern double sqrt(double);

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [v3] build failure from automated checker.....

[Benjamin Kosnik]

can you work around just this pow(double,int) thing with hacks in your 
source tree, and see if there is anything else?

thanks,
benjamin

Re: PATCH: gthr-dce.h update for v3 thread compatibility

[John David Anglin]

This is the gthr-dce.h update for the main.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Index: gthr-dce.h
===================================================================
RCS file: /cvs/gcc/gcc/gcc/gthr-dce.h,v
retrieving revision 1.11
diff -c -3 -p -r1.11 gthr-dce.h
*** gthr-dce.h	2001/05/30 22:38:43	1.11
--- gthr-dce.h	2001/06/09 20:00:31
*************** typedef pthread_once_t __gthread_once_t;
*** 48,55 ****
  typedef pthread_mutex_t __gthread_mutex_t;
  
  #define __GTHREAD_ONCE_INIT pthread_once_init
- /* Howto define __GTHREAD_MUTEX_INIT? */
  
  #if SUPPORTS_WEAK && GTHREAD_USE_WEAK
  
  #pragma weak pthread_once
--- 48,56 ----
  typedef pthread_mutex_t __gthread_mutex_t;
  
  #define __GTHREAD_ONCE_INIT pthread_once_init
  
+ #define __GTHREAD_MUTEX_INIT_FUNCTION __gthread_mutex_init_function
+ 
  #if SUPPORTS_WEAK && GTHREAD_USE_WEAK
  
  #pragma weak pthread_once
*************** typedef pthread_mutex_t __gthread_mutex_
*** 59,65 ****
  #pragma weak pthread_getspecific
  #pragma weak pthread_setspecific
  #pragma weak pthread_create
! 
  #pragma weak pthread_mutex_lock
  #pragma weak pthread_mutex_trylock
  #pragma weak pthread_mutex_unlock
--- 60,66 ----
  #pragma weak pthread_getspecific
  #pragma weak pthread_setspecific
  #pragma weak pthread_create
! #pragma weak pthread_mutex_init
  #pragma weak pthread_mutex_lock
  #pragma weak pthread_mutex_trylock
  #pragma weak pthread_mutex_unlock
*************** typedef pthread_mutex_t __gthread_mutex_
*** 73,79 ****
  #pragma weak pthread_cond_wait
  #pragma weak pthread_exit
  #pragma weak pthread_getunique_np
- #pragma weak pthread_mutex_init
  #pragma weak pthread_mutex_destroy
  #pragma weak pthread_self
  #pragma weak pthread_yield
--- 74,79 ----
*************** __gthread_key_dtor (UNUSED (__gthread_ke
*** 424,443 ****
    return 0;
  }
  
- #if defined (__PTHREAD_LIBRARY_VERSION_1) && __PTHREAD_LIBRARY_VERSION_1 >= 1
- static inline int
- __gthread_key_delete (__gthread_key_t key)
- {
-   return pthread_key_delete (key);
- }
- #else
  static inline int
  __gthread_key_delete (UNUSED (__gthread_key_t key))
  {
    /* Operation is not supported.  */
    return -1;
  }
- #endif
  
  static inline void *
  __gthread_getspecific (__gthread_key_t key)
--- 424,435 ----
*************** static inline int
*** 453,458 ****
--- 445,457 ----
  __gthread_setspecific (__gthread_key_t key, const void *ptr)
  {
    return pthread_setspecific (key, (void *) ptr);
+ }
+ 
+ static inline void
+ __gthread_mutex_init_function (__gthread_mutex_t *mutex)
+ {
+   if (__gthread_active_p ())
+     pthread_mutex_init (mutex, pthread_mutexattr_default);
  }
  
  static inline int

Re: PATCH: Fix invalid loader fixups from shared libobjc with

[John David Anglin]

> a similar nature.  The new issue is the install location for libobjc
> which appears wrong to me.

I am afraid there are more problems with the install than just the location.
Multilib versions are not being installed.  Not sure if they are even being
built.  Should know in a while:-(

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: LO_SUM still breaking rs6000, revert patch?

[John David Anglin]

> I am guessing but I think the LO_SUM changes have also broken the PA port.
> See < http://gcc.gnu.org/ml/gcc-patches/2001-07/msg00652.html > for more
> details.  I haven't tried todays change yet.

On further investigation, it appears the PA failure is very similar to what
you describe here < http://gcc.gnu.org/ml/gcc-patches/2001-07/msg00659.html >.
This is the rtl that causes the problem:

(insn 61 78 80 (set (mem/f:DI (lo_sum:SI (reg/f:SI 1 %r1 [103])
                (symbol_ref:SI ("ffedata_storage_size_"))) 27)
        (reg:DI 28 %r28 [118])) 119 {*pa.md:3094} (insn_list 194 (insn_list 57 (insn_list:REG_DEP_ANTI 76 (nil))))
    (expr_list:REG_DEAD (reg:DI 28 %r28 [118])
        (expr_list:REG_DEAD (reg/f:SI 1 %r1 [103])
            (nil))))

The code is trying to move a double and is trying to find a temporary
address register which it can increment to move the second part of the
double.  formerly, this situation only occured with PLUS.

I have attached the preprocessed source.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

begin 644 data.i.gz
M'XL(""QC2SL``V1A=&$N:0#MO?EW(LFQ,/J[_@KL.9^/)&O&`NW6'=]#`^IF
M!H$:4$^WY\VK@Z"0R@T4K@*I-;[]_O:7D4M5+A%9A9:Q?3_KV--4QI);9&1D
M9F3D-Y6#@\KOO_ON3^Q_M^/QGZ9_FHQ6H^_&O]_ZIE(U`<LD_MMW=[^O5!GH
M8!^%":)QO)A&MP)5I(S6J_C;NSA=9?0Z5FU+SRQ:C&?K2?BGT2*-)N%XIDB.
M3!*K>`+TI^6(_4]1U(X\&%OA8CVOC.?+8/6X#+?^L56I-"ZO@D%[3_VZ4+^:
MV:_+^L>MK^=;6UOAEU68+"IK5L;;13BI1(M5916O1K-@'$_"X.9Q%::`)W)A
MK3,.TS1.\KRN^KU&:S#H]8.3_?T],Z&*I70:5EK-QCK=W]\W2L=JG*XJX[M1
M4ME=CH+Q<AVDJR1:W)XK#*1T%8%YSMKO^+BP_4;)^"Y:A>/5.@GSRM7[C7?M
M8:LQO.ZW@BHOIIE4=9)JHNBL?.OQJI*LO@23<$K7!?)%*^,4J"*Q>6]LY0QY
MCXV2VW`53&>CVQ0J7#/%VJXQ+G*3FR_A;)K)W(%7+$%NCZK^=A7E,UNBLGNW
M9!591N,@'=V'`4NN;-_'T60'RGU2._1QE*PX!U;CM/(/J/Q#G$S2O<H"4@(F
M`TQ\67/ML8:91`EKP//*5^!]>GSZU-*.X_ERQ+HA7N[O.4E5L]_40!2EO$E&
M"];!D,#+<'KF*P.T@Z!CU9A&LS"XB^//E6VHY6QT$\Z"1;QS[G;_?/08C$>S
M6<#^'X]'7.1+*YF#VK=)>)MF_5XC12?'%&.&?03CV2AE_5#I]H)^Z^U@K]*O
MRA]O6]U6O]Z17Q=7UU=7K7[V)7ZPP6/]*2JF!A129?"N?3&4O^L=Q;'3OH1?
M0:-3'PQ:`][')R5K/8L7M\$D7M_,0E7OTY*D:3Q7)&>EV_C;N^7ZBR*K[F]&
M5]W/**M>2B:PH_5LE75EM69-3O#'::)%NO@6%+S$E1(%G0H@KOLK?";I-5O!
M!>N,=#RN?%^I[>EI49R(Y$,C><%DA"<?F]B+L4BNFNAL:I3,3XWT=,Z*$ATP
MP,&^`Y@(0-4`K'.*F@.0%`<6J]$727'H`"3%D<4JHSAV`)+BQ`",;M(TJD'Z
MJ9T^$>EG1OJ2:979Y($!3FH(8`(`LQ9+9H^P.823'&,03F.6:A[?,U671JQ;
M0(V,9M`Q^V9)?@V3.``ULYC\/1)EK5H-J*'<92B'%$J:H9B-JABD$GJ,0/\>
MW4GH"0I5M*<H5.5[AN8KH8?["#0K\V$5@TXG4P$U^XK-(HOQ9)I*H-EHTUD\
M6J61`AYA0,7VQ`5.,LI3#*@HS:I.HR^B4.E4MM31/HXPR1"J%`?9(D<UBH-"
M0.K-+$U>NV`Y8C,-(!T22*F.A#020\J:XNB8@,O6.#JQB\J@=H.<DCAYFSBM
MJO&1M3YV&E;CHW#,MAU-)D*I5(]MK;*>@01RV(E%M%!$IR;@"]/+`G!F]A!H
M9I'_F=F>\2(,F.$R4]!3NW23J>!WYA2;`Z0)GZO/]<U$`JHV0%&816/U5!0'
M-D!16/-&=*\HCFR`HCBVJR_$H;9_XK2+!+@Z6@+.;("DJ%HU_WNRDB35J@-1
M-&;=?[V?A,L##K%4$(<$T7PNH29'`$8P"W-8#8$Q$>&P`Y?K\2&''.'Y2:C9
M?O=,YR6I*(JE/01(4%EJ89;>27&L6?H`(!,),?N6&?$9C5G")&0+H@4`K&$F
M`/IT5K,&F84!:Q".91:7V]'2_.8->VP6^H99V)]'MR$'F:7^VWJ^Y,E'%L<T
M3*-]#CEV\\K*DS[.$[;D`+03#QI8W<>'-]&*8Y[Z,3G.F8MS/YJM0RSKD_U"
M9*,`EDXB\#FFV<YI=$-5WS)O%"9=9LO^C'DOG)B]<!/>1@NV'EN-;CC4LC$6
M$PUF-K]:1V;]>^K8";_>!V)8G#I&`@.)87%Z8(,R(L<:RFCLDJ09S9D+$31G
M9A&8>9V$\W"Q`F6@UJ/KQ2J:<<N,4UB*=3P:WX73V3J]X\:W9<9;4+.$\7HU
MB]ADP@;0++YEW04]Q_%.43RFI"P\2UCGRTG$+?VJG9Z*])J3/N7I!PX?D6[9
M^>'?>:K9`^DBY*EFS=/9BJ>:-4YO1:JU>)D)#F<6+D^M[=M\USRY:C,6R36;
MLT@^L%F+9+-^8.9'?'5U4#NR(1,%.;9&"F^3FEG/&]$FUB+M1M2^9M;S1K24
MM6Z[$;6W%FTWHJ6L%=N-K/R!K7QE\J'-620?V:Q%\K'-1)3:6DG<K!>R+*=.
MNL`_L]-%C:Q)&](YOC5=LW31LM94S=+C9!(FX80#K1KK(*1O>;H]13+K=P(J
M04"/,2@;@!)L-@)?9#($#C+;02XFXT14^LPNS!WG=^04\N\BW1$_OO[DH&-'
M,OE8M8SVK%X2>DK42X*=\@E%XI@-BJF`VB9#QE2`:TXE>&:6C9#W@(`>4CT@
MP)8-IB^IY<Z!93<8"_,[B7)"HR@NR'I1K;0X_(R`"X/VP+(-8%D@-SP<(U\!
M#FV`W#NQ)F>^RA&`8QN@6)GU`R-?`LQ:K36(+0)RO71@3>!K#>(LL63VI\[6
MEP(<V`#%RJS[EYS"K#NL2N3^D%EWM2A34&M;*;U3;68OUQA$9F6OUS)3_-!:
ML(TR4_S06K$Q4WRF:.S]*#''<Q!NLJGIG:.8[6&`,(.9`UQ[F2<C]C&W#CG0
MDH<%;+Y/<MHSK*0`L5=RNMG)X6;#<$,T78[&H3(,#ZNV8H]F*V9TPF[SWR2&
M8P3^>L_3#^UTD7QD99F*9+M9%O&"V66SZ-<PF*X7X^4J":9QH@XI.(F]\S4.
MEZLH7C!M-`ZC>[[4.:S9$YDH?QJN6/%-3+,M%O'J+EK<<DBM\E4<4=A'8-9N
M]9S9D6S@91OPM3,"*O:E(0$LQKG8FJ:8L9P$N^,3$K[UH==NPM?>UM:;MOCQ
M7O[[3OX[D/\VY;]#^6]/_@M_5XKH2E%=*;(K1;?U_D(REO\.5<)`_MN4_WY4
M"!<JA_<-22K_'<A_F_+?C_+?H?QWJZ$*U%`%:J@"-52!&JHF#;TJ'VJ*]$/M
M7?9KD/W*JO/A,$,\S!`/,\3#'/$T0SS-$$\SQ-,<L7K\/OM=4ZW"LKS(LLP2
M#_/$TRSQ-$MDW=GY4?S^!K9':0EHJ"9CORZN%,D!*:"UK<OZQ^"RSAJVVPHN
MF=R+0\5#B@([[I4?@!$L1O/PYU_.U:D+3U-G:<`^Z->[S=[EGOAH=X?RUT6G
M5U>_K^K]8;O>T:`-?K9N_PE0[_*JT_JH(\L4P9*B^]!J#-D(S\ED`DT%#<7Y
MP\&<U`5&:]@USG]"BWQ3.=TOU:B&SP+GD3(%*!IUJPAUO8A6&?XWE;/C)V9Y
M$ZUR+M4JKG1(-EPN.)^'B)GY7+FI"FP9Q\J&^N,4H.`AZ\JV7JH]NW7A''RU
M<^YGF,[93!<R\][@C'2N^>?/69U4D[DRHCQ#GK+M(`DF)`OP>KA1!><'Y7NB
M+%C)-$*D53(*X,F+Q2;4VP5LG9#E0@5;+Q]O"#;8DR1^4,7,.IBL%7C=\%_G
M-`YX/13A@!T@4-CT"LX:YKEOS7`B@&T]U@_[0;P,$]@XWK9](9!VW#G767![
M29+#\B`)V>C>G$WZ.+^)9]'X&27)6,S#>9P\/H.3;!9F80%/X/=\9OLOQY$M
M0</G%V@LAN*S6(%+CW!2>3J/Z9+O+C^=P2B)5G?/I:]6G],,22B:\QDL8*/E
MF3Q$0P@7EV>PB:2`L-]'SV'S//+U\[-_5I]"_@>UY_;&<VH`"O49]6<]^'3J
MV5T*1W71]-E"J7%Z9EL^JS>68Q#IY^JJY6R=PJY.D+7N*DZ>,E7=L9GR&>6X
M&:7A\Y3F)+I_MHIXNLTP7T8W<J<B2N/%<YJ2S6#/8L4L>,P-D%M-W+<VVZO8
M/[62G=T.PI_T-EQP7SJD1$])V?%F)!WT7BBOURBA]!7\;5I#.""^6FOX<Y=N
MCO^DW)4SY9.R+V8]>1W6Z]<K]?KU2JV<2E^)]:NU]:N5>OUZI9;.M24X%_*9
MO`0?Y;S["E55[K^OP5HY$+\>[U<IM^O$_"\\U3G>U,\6-L?Y^B4YIB_#43_(
M?B%FXLC[Q9B]:,E>M,U>D-F+]J9P>G\VLU7N(_]L7II+_4OQ>I$Z:@[[+\7K
M9<IE7@=X.7Z3%^8GO.I?LGPOP\^]RO""/-,7Y_F2(IC=JWB)7K&N8;PHRY>3
M1>N2QPN7\D58RBLDKV*^JSLHKV'`+UZKV/(6S"MPEM=HGMUE^JV;E^A_N`[S
M&ETD;OF\QG)67!-Z'<ZO5&9Y4>EU.+]2F>55J=?A_$IEEI>UGCTNY-VN%]DA
M>"$^+U(>=='L11B]2(G4-;97$`;]'MPKL,\OTOTF&]'YW;S?)#MUW>\U^^5U
MV&<7#E^-]^N46UUY?"76KV2*J4N7K\%:W-I4@5X*,;4-O8U)^+U.IPY^%N:E
MSU=H@.S6:(GZ<&_RC2L@[I@^6XFC=S)?F&M^@?3E&3^IY_&;I:\@!O[KM+]=
MAB]@-1#7=U^,\6_6)W!=N,2HU.\/ET#/+Q270#9O&&\HP:&Z?OR;&!.ANM'\
M6^7VFU;MMZN9NLK]VV7V6]6LZ,+Y;U,([9;ZLU52M!FSUZ@/?J^^A&K!+]J7
M(!0W[Y\_0?.+^B_"YB7L$!X&X/ES5/CW3;4TA!38E&2&F`0%)+>;D\PV+]CM
M4^JR?D)E-J>!*_^;5V=C&A57X3=19BI4PV^2V<WFLGVSN6S?;"ZH-YL/AYO-
M!?5F\^%P\P0YO7G">+AY@IS>/&$\B/@8FQ+QX!E/('I*3D_H5AZ38W.B)PR&
M/)K'II1/I!-Q0)X]J>EA0UYE"TB+._):[G$0N.3U?-@@\LGK>+'=O4#_B4@K
M+\$FY8%9?K.I[04,,CTTS*O*[NOP%\%I7K`57GD$OPY_$4WG!?78*\O"Z_!W
MPO\\_US.CA;TLAQ?QL?&B$7TLNY9+^-;\4H._2)4TBMY0+P.9QFLZ95\*UZ'
MLPP*]1K>4:_'>AZ_GDO7J[&6(;->@;.,N?4ZG%_/">V5RBS#AKV8$]K+."'*
MH&2O(5<RJMGKL'ZM_A^]ZG']:[5U%MFMQ#ZQ$^JMS.'8!K@R&-QK[KL7':"6
M'!?ESF%?19WK,>Z>RK]$)[]`0YA1]5Y#EUMA^3;>OC%C]CWE,/:W.Z[\[8X/
M?YN<"B,9/GN&0@(?ECG\)R(A8M+Q3:7J/`QT0+Q`9SX8![#T,5V%V0M#YI-V
M&4R%)1#ORZ6KR2@1K]15#B`FW0$&.]CB.H(5,LBJ<S\*9E&Z8BFWB_58?8I(
M9OM%3'22BD9Z<(C7!]KA\*1<?5@.>7VJ0.4"\[+P:!PK-L].IX$H_=F9G\*(
MXP:AS@1=[?1T`[H'B-XF",U0@WJ=MYRZ1;%>-01TX._>ZA%"4V.@_'FG/ZW3
M)'M^D)4&\-+'>9HSJ6%E$DS,S!DQ5%XG/2#`!T3FH)(M'L>%>'F;\QAY#'0*
M3>UT!(>N;7!Z%R<B[,\Q2B7@:P=!!@LZJ*%46B@@!K:)IJ-TY253"/"GD&":
M$?]A",>'*'V.L\Z0#"8R%?Z=C[X8/!1HG<.^J9QMT/JJ;*"(R<*M<P1XWJRV
M>><&LY"USJFH&MW)*)IL_V#JX:#Z`$/*A$5P%Q*!\,B%!D?4RT$R,0I"<>#L
MI91Y6*!H>BF*6>A8N$2)7)3480A3!&X('L["1,F9,`DZ/BHO06I`P@P@:L)4
MU"&AHFJDDG(UY)&'!__C(3"U!N&EF(3W<DJ@M.A!'E;3J4.TB+.^V')00%Q$
M?$V)@V,L9M'BLXYBEW&ZC%.MTZW"J&X!+-4C)[3.=ZFS/,P<G,I.TYO9Y_%B
M11<E$Q&%JLIS1G6P4QXG-[Q0"BN>3MWB.$W#L#)9K5)R<H"1JTP*FV8:S<HV
MC4#-"G1P7+I`3G[^QBGJ+E4DLZ^J1R<;MU"9KEI&$W0<*/CLH0CCM@"^+H"O
M<C@N+!PK5?:E9\@&;%V\*AC603!>:&/?0N/S\"J:*TOVH$`L'1$8PPT%B[E3
ME\_AHT#1.9CS8Q"L^8]S`TDQ"(()Q(4%)AI4A,=F%41@.67ZP,2"J'Y&6\EX
M8&B9GL4[-FN,=1JR!=PDI=HC0TQFT=RC,+)1"GAJ0-3."J<&-!^MR'FUA=Q4
M-/'!ND884`'\<^[INW4@NPY#X38#3,(X6!B"?-_$0T^2RP)X\A=UN(E6IUX.
M#*%Z;&)DO<I@!S57\E*'J>"5NKRR02U969TA)+222:H!E9)?P49`-K@KVB"W
MZL`M[,KR[C%%&)C]L#0'@5D!R6=TZY,8T9W\G62[+$HAY1H::VRQ!6>I@=Q8
M2^*578-,$TV$%80I038P;9YR"R80#9-4_I'7,?FY^LMYY6ME5\+.,;J_KT<3
M1L0K?#^:_5SC))#JJ#!6J36NR87`C"78!(E\1+C15>4?]GR1S5<WLR!9GJ/I
M*97^<_7D%P*40N4SD(@$+"#3GP]_D:7\JLIE];'0R)-Y,`_3E$F*IBR=L3`2
MVO0;>-G&I]@4'9^6F<:25(<'!<:<8UI.@ODH_<QI#TL;@K(;&'$:KOC;UO)/
MLF/_ICR:_\_;V]NU_</3G3^R'S!WQ]-MB;-3V:V<[NQ\6]W9^1,!V\G;_*O,
M#`IZ5#O;Q`CB<\;G(#<4R8GE<Z!-#30GPZ#"F(GI/;`,02^FEV>V'HH250UK
M7:;O.H'LH#MA;@?^0Y=VKC=7N92;DP6S*)@>\$`A="X"5H8,Q':EJ!DTFH4=
M/_@=!W^M7+0[+51I_?M5ALA[/0T7DZ4'8Q$^$`646:1SQN3GT\H?:[N'OQ@B
M!=OSP&*]8-I?*N6OE0`:]:-8@M4HV<D;7.H_QD;?Y3[$MD$YI3P,@$Q8X:+X
M1KS:P'E*6,3CYT/4_&W]E9>=<PP-WGLQT/8J/B*1NIHO&=UVAF*SG3*C/0VW
M>2%1.+^SA,-YJS+MQ%I=(NQ5R(P8WKV+*)_:$.L;+/ME`MN>.951_>^^^PZC
M2<>C!4&"4\A,2F`*UF40%4^DIR@2A'D9NNEMN!KC/23H`"'=-AJ<[N_EFC$K
MQDFM<I+(=.$4E'%0YV=NV;6B8QU77%A`@1RB!29?3DT0'+@LX&1C8(E4-M1`
MR6%U4=VTC--,+L7V%M[`J8DJ"D@0"*1IO`P7?NV`$"5A`9E68S@3\VA)L_CA
MYZSP:OM?O9>C8RM89;H*9S./EDG"AV@Q\2",9^$H"9/$H\G`TO)`DR0FJ'D&
M2X%@M>DW\$@TW2@9"Z'@*JS!1Y-M,1LIK9?_:V;NT#XD;(4N"U#(PMXCH'L+
MYO44-+,QG7I&%)_+<U7.,SLXWB_,3#3:F/V>1Q//C,3&T"+&>T**[81++9<I
MIS\.3@]\_8%-YPNVD)13>A#D=H-1['BY&B6W;FE9.A,,-)T)+)K._G>>VR:F
M,F0P62_]N;>??\$'L]VTS+A)]*;]!IZ_+"4$+.L'>G`P+?E0I&8]=H1(7&ZF
MH:3Y$DK[Q4=F+P#I:MYC,[WEB(!4[MYOAA33>ZT!EYY5Z*AX/`G.B,U0HCX>
M$ZE,=62NY6KC#'`N*LP6A^WBD%#JN>U9@*B9.#EF>5M')RIGT$A#UBY668N6
MSI,T/7+T@OK`O.N6J_P$7-#4VDQ<@*E/=SEJN7D/F_7L!MN($T>>`CTWSSPX
M(A<:*Y^>2D@OJ-02:*!;J0YF>N",5&R2![&07HUNQ(.21X1O&/A2P68;Z4LE
M`%G>HVGX[1CF3N58=GCHQ1&/DOX#YKD@'=\%47HS&RT^5[ZO['_9WQ<O1$O`
M>+%*9@I0TP"3Z#9:*<"A!IC%#_P180XXU0!<STJ`>(Q9`=:+L0+4=`#?9):`
M0QVP7BZS/$YUP!>M6%5X!%NK8S1)):2VK].P&4`D'QK)BRS]U&(TFBWO1@RD
M%^9_]-KOZ;C0U-\;I/^C-^&>7D`#%\I+H=XFH^6=SI91_H_>G'H7+I>\)GEU
M_T>KXA9_PE4I;//]4KFY))"9U,["GVM'Q[^H(WJOA*$,Q680\%O%O-DDOV)L
MWJY9[J?'I$->D7_;*>W+9Y`RRW&AN?*=(9"#+4U7\-1SPOW$8E8]\.&4]F$!
M]T*:C=AXK7EQ--,;K0K6'H+OV3[M$@E_EH\C&_J:C^/!`09S+:AY.!_/E]:\
M@LTRJ-W!."_&HQ5A"I%&`"?+<MV`6!2)E9GO&3ZEN./E(UI:NGH$06%&1+/@
MS>%O#8(FGLW*$TF#@M%]F2;SIU7I+K'R<RVJ#'EYDWS>=+G#R#;+A/WO"7FL
MXL\;R8#8^A#%$%8#.;)<207Y*2.H"&76$HH",:U=,F:@;Y<AR`5BG"[+K$P1
MRD)"[1`"(9]9*V*QS59%U1K=P'0+F]6'26&_6"MFW3Y9+YUC">W@V9'<C811
MC>%1&CYE["^*"3WZ=S$+GJ)S!%EYS<VF,/RV@GH6TIPU>7_H<Z\'H_P$[KA2
MYTPP;WUK&JTZ?K0F.>PS^DKI2@I;/89?2FJXI!PR%_>;<0PSE2'_WBD1>O2F
M]-R?#6,C3PACL$WILR>+^C.EW1FB8C,ES33X&6F?@N_]6;D+-K/H1G-U/L9@
M^CI5[!RS$03%#:"LB&L1>J;]]W6L'6G+(U-Y+`[OSII^/@Z+;(O#Y),EY\QF
MDMLWE>,CLCI:L\H=Y-$JGCIZTFY^AA3Y=GNRXC#$F0]19LIG<7O/2OQ+LN8T
MCL4D:+!A97IR91S6&[#@#3Q:3+!#,7%\S*&ZAQ_"8;0*OT1R4M_>W9'7[3!V
M'(_2)K?A*ES<%^VY"8G'.]0LU8T:4<Z`XX($_]VF]MT$!ORSG>_/J5]4!\X@
M2P*)KV5N;(/"H_KF-ZOX8;PMKZ!M,'D^C%?Q_"8S("4#W-J>WZ202[IA-I*:
M$4)6J66L:KSH1=(T"=4""0/_/8V3%;DC"=5D@N:9&7:D/54KHR@XR>A&Y4B8
MKC=I.&+6?XGIR"EHI:"D6'9PASH>;YL<*:M:QR5PDE`@.;,A/(E]Z&DF0QV$
MJ\_AHV^(<K090[@]/-VVMY%^_J4B3ZK]"MQ2IA-00HR=V3D64BB1G"Q="CY$
M_[8A_LQ;"(XR+T99E,\UU[\,'XA=%(O+;AJ&)9G+K6U$WS)CH89:$MI&D<M+
MG.\S;E;=$=0G'*/:;++Y8CE*'?\0T_?6=TYLE\PX%$:`_"19V]MRK/N'4;3R
MV>8:2OD%PK&'2W;;S;/;63TI9'",;4;F)34;0SCW`A3Z$%E^YPCLUS;_$IHP
M,T&^J9SZ<\3;)@G3>)V,PX+M3QVM?#-CG:5SJF57H\MDZ+M=751F^@HCW/XI
MZ%B%4K[BIQXNI>3+66!B#-R"1+?A?;C0QDNM"$V_I1_%8(;<WH]FPM]>2*!8
MQ:012\[NL524?VD&45ZV7R4'Z[*P6*&HC#'V#`)>*='T\1R!@/*-%4#ED$%Y
M6)0\>YZ'=)/'^M.L/QMC<#ZD>/&>T#W=*X/VV]:'H-OKMBK?5_@AG@EA_^W6
M.RSY*]?T^X5=AQ8J%S*HH6BOU3PK"#3&:AZP)?&YF3*/%E;*'9-Z&VDR>K23
M8ION,1S9=`\NW:.;%*635,@%;X'CHNJIVK&D=!F.=6FHR-MXE=6]J*NY>&6I
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M:#H%A&W1(WNR9W:T&TR20';9_#-'SQ75+HVK,38."`PK<I2..9ZP//U\E5ME
MCF]R-Q?6.:O;^<8D;)",9B6ILC,.T93F<M_>!,#J^4WE8!\S39VAI=I!W#X6
M_ZIE`F."6E1X__-I?/6K.D`2]`=8+!*#WO18_!7N:<`50.2L1*QDH)PL#]$N
M2O'8C:#4*[9%)5C<NBPV(F8FX::T0N^-V5)_9>:;V1G0FU([XANA`C@)9^%*
MC`-W[RA'4ZTD\>2!EM%0VD2VN^=H3/,/(2&SOK6SWI`XOF>KN?7"4\7%:!&G
MLS!<;A,]C_<)$\F3<E..>R2MC5WB#,$>@J?8LH4:@MG<"#.#?M]3KS8SF6;1
M[9V\N%DXN"K:%,'Y!X%V>_,(C13D-H6Y/2#Z4.P0.),F=0ICDB$RR(G+,USS
M7C5Z8SE:W2%Z`)B,N+9.F5Y!SJ)DM0`CGK+VW;:(LY.P':-3S.K-PK'<-)$7
M7'?Q7S;OG>QR:DDMR_?.)W]#)KB\N$@FCC#I<UFXFHQ6[B4ZRLT>D`/[L%KC
M)[<3=K#[>JG>T%3YG71N*^%GV>A\JJ.)^R?\:=$"_U>U^W%T7$)#($W"-Z#8
MHJ7$Q"OK]CD*<I-6U[7*5C5,51VP8&ML:2&*M6*Y#9*#I^[(\%O.S*B]B2>/
M:D]`6Q`)J&Z7BUO1XI_Q6KLWJP/FHR]"SG@=#LK5X10S2<TZJ%*MX>H\;<@G
MZV"=6=0$0BH0S,4C2V=%3](4`40BW4F>X,DIFLR6`=.9?=[*<_T;FKY('T9+
MA/N"OWOK`L!41P%1/+Y#LDUO4WWK54M/QO=8<=C"8C1#*K:X'Z</2'(DTH4@
M5`^*]A?MLW'8;$ZB.(E6C_+0<**L!A-+B(0Q>4DIV7704XRI4A,(:SX&3-9B
M6*"L=71#X6E$3-BQ`6OM+Z.SN+,_7,E+D&\!'VSG.[]8@X`'C)][X?XCNH)P
M=LBQG34F005[R3E2B8)@VB5GL,E6*+KI7Y(5&]AQ<:T4UO,VR#5&I;:*B6KI
M/.1?ML\9C..)L=TP:`?OKUO7L(_TK;;'Q)*O!ZT^I%:-5+Z39&Y5L=3ZX%.W
MT>X9VU0L^;(U>/N>(1]L?<V\Z<IVV@&VD^[6SME0D2CFUB(?PY&YEYRE0I,X
MB=)E6Z5F&\\,)#>*M'T9V#XW#0).8SOGV']B7`<!^]<]G"OBOG%N#F.9^]J7
MN_K[RA`_1[-9,>;&Y9";_:O1:IV6*\B@_;;1:=*X@+-D)M[(1>&@)!Z[D,)R
MJ[`:$"H*9SP=K?7)OC1GT0)33S?(M>#-:($@?94!1[1-4AX]"^IOB#6K^FCR
M<W7_E_,M?EH"XT3%'"P8;0?V0/O'4T;1?T;*L\KQ[S)25&C!,H/E7VJT?*U\
M#LQQ01PB%EH.B_`AC33/8G2]ER-9P7?TR8R9GH'9'+QZ`O+SJ0J?];6B</E6
M$V8$ZMD5V1:'F!68,\`K/A^-[Z(%7%R[#[F8^GP+<.0-8J([)A3.<8,0QHY!
MY>7HF/I4C9Q>G2Z#R<TLX$LZ?0VNO%U3AK%_CB97\>0:GGR`)Q_BR4=X\C&>
M?((GG^+)9T1UJ&H2]:P2%:T2-:T25:T2=:T2E:T2M:T2U:T2]:T1]:U1_4K4
MMT;4MT;4MT;4MT;4MT;4MT;4MT;4]X"H[T$5E*T^#NQ`__I@86/?'2S<P@!>
M,-+.W63Q<$F5A-1(R`$).20A1R3DF(2<()##0#_QU9)G]KJ%CU@<^PC'/L:Q
MCW'L$QS[!,<^Q;%/<>PS'/L,QZ[NX^@L'<>O$OA5`K]&X-<(_`,"_X#`)SJU
M2O1JE>C6*M&O5:)CJT3/5HFNK1)]6R4ZMTKT;I7HWBK1OS6B?VM$_]:(_JT1
M_5LC^K=&]&^-Z-\:T;\UHG]K1/_6B/ZM$?U;(_JW1O1OC>C?&M&_-:)_:T3_
MUHC^K1']>T#T[P'1OP=$_QZ(_N7S1C8ER$BZ1[;O76EC+`EOCP^MB84'@65Y
M)F$:)O?AY!P#WB95--V*29RC'Q#IAT3Z$9%^3*2?$.FG1/H95:U]"H!7F`%J
M%("J<Y6J=)6J=96J=I6J=Y6J>)6J>8VJ>8VJ>0VO^2BYQ6O.`"0%G@<#:*5:
M:Q`C?JPAM2N"@D&J."0E>#&I)2C&ACCHD.4X_GMP%XXF%#CU@QGU:A3-/-0T
M>&P(D`4YHR`UHKW&1L=;D!H!6:ZYNB':61_M)H`H0YI07980)4AU36,"B+9)
M=9UB`DZH^I--=DH!R.:ODKRJ5",;FL7J&**%&804C1I1?S4!U'X^^,7$D$^5
M!/%L,OZ<KN<X=!$^2"@<FJO9QGD^2I^,#FJZ,ZC&2Y6%>]MA"$RQ&1.G#=,G
M6X/QDB1C((J*:09/;@<>ND,/W:&'[LA#=^2A._;0'7OH3CQT)QZZ4P_=J8?N
MS$-WYJ&SUD<.T$/I%1A:8F#&]U'6?)0^L:GZY*;J$YRJ3W*J/M&I^F2GZA.>
MJD]ZJC[QJ?KDI^H3H*I/@JH^$:KZ9*CFDZ&:3X9J/AFJ^62HYI.A&BU#8%R1
ME!SHH:3SY$`/)5U/#O10TFW+@0:E\=`JV'@FK0OV48,EZ*7G"`4<JD4<JEX.
MJ;\&J;\&8']ZZ3F"C\/8T7(8@H]#9L]ZV>18?EYI*5YI*5[24BXN%\<J+%<)
M7FD)7F-'WV((!1S.BCB<%7"P-1J&4,"A2&YL[>8BU(HXU/P<Y%K"ST4A>4>A
M;74A<#^]OSD![J?W-V9JVZ<.W-^4`/?3'Q30'Q30^T4ZM2U0!WY<0']<0']2
M0']2((M%PZ%H-)P6T)\6T!<-Z*+Q;%NY&$(!AZ+1:-NM+H)?B,:._>H.>/\P
MY`@%'(IT:ZU(M];\HL@1_#:!6A0?_T)C(0MC"R-?'']52U_R%!#01TD2/]B.
M1^X^K%BW.DGV_JM<;R)I[EF>O><JUX!(VBF2=H:D67NL:L6%);H'E<Z^JEH"
M88E8;:I8=:I8?:I8A:I8C6I8C6I8C6INC9S]4F608XDN3VN/U#&2_0:PW[CU
MF:Y^L]1O<I:P)$L8B"7LOA+FG-]4\YMA?A/+;S[Y3:-BD\=KSWB-%:\EXC4S
MO#:$UT#PSO[>J=T[;WLG9>^,ZY]-_3.E?Q;TSW#^V<L_,]'0^3*=KMG,=GM7
MA#.+'XI0XONI.&O4IAX9+=&).%/ZJ#%'P!Q99J-;S:O3R+>2_794W]+4`<(#
M-DM0?Z:G#?MD7^<85I2?J[+/:+$R[U!^Y25=6I>1^)U"!O@2)S\?[AX8^].R
M1*S=G.`@5+O9Q<IVS2&/XT.WW)GQ``@'FFCRXCY$X)C,?F;92!])["Z'Z>+H
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M:[&#9&.D]TA3\.SN98V-)+N^J(NUE;]Y*YIER<&B]_(`L3L[>0&,4+11&F9A
MD*M'F^0']'"+00LXAUWGCF[#^7+U"#%$LOY&[WU'MU/&K0S>:#(QT3R93\)9
M:=PHG8?SFU#=@R]%(T8+<N<S'X#Y57HM#><&MRE`+@Q^6C&*6B9=I\MP,7$J
M0.3&4*/%K=G><*.AA)JQ><'U3]`43M;L'T.-P+]X<>!:]H2'.2SB48$?!<%-
MB!@B/%3!FNC,OZ_#=2CD&>X3[:GTA2\S]8".%B"/7_\3;7E6:D@YH_@FG03V
M2(8`O""'.SMZ1&=W0"YOS2&)X2GUN&VK2T-899(1;,*6_]E*,%+M+>P"SD;^
M).*'0'="A,^UBDVJU%#-#=%/M)G3;$)D3.5GZ#ZL&'?Q;&*UJ(.3@!HI0@)!
M20JQEJ.UIG-K!UA(0&JPJ7L]W+HV8M1:"*P5N!Y!4&0QV&RUBK'@+7(F,P3A
MGHCNPUI<EU*1E$\W=@PL9>.R\L$K8]MD2.W;G.N.,,2+AM%F5XT.4<O>-ML.
M3_S&'7EKZ#&%8-):=@4:U7]7:IJ,]"BD3@Q)!\]95W((,SB2SV%B[8Y.YT$X
ML18GD);:^YZ0:.^9LK0QDI;.7+39&LG$35J":?;5*+`T?4_]XT3VV%E)U9&+
M-H_A%LRC=(Q<*.1CA55(=*B[K)1PW7)$X;JME_^)17'&/A"V`8T7Q@S3!5O1
MIP$1WB<B2P-!F*I>:(V$CI+;GP_SQ?O7?':Q6I2^PFNV>2K^=3,TUKD,2XNI
M0N?ZY=G9YJL[P%EC!<OL$"A5I)>*BON$S5W94O-+&M&EUE:B6&FA5_B5;;#C
MSITEF5%8[3Q'%+5`!R)CQ5W'9\U6<+':EH[4<_G9Z=/TBXO\E;4';Q="5,<@
MJJDNJS9_0RDR_'0Z-_NRB@:.MN*<'&']G<=2,:*_YLUS%5RUFWOZYUOS>V!^
M7IN?%G+#_*QW.DR%1A/(.[!VY_1G*\!B9X:/Q%.Q<(P5?[8R1,/>&0%IA`1`
MDC7#/&37T8W](^(*MZ7,'LS=2P=+9-"'?9])^.?30LP&,]`FZ_GRSX@"M%"'
M83)G"7_6MM:_0O*YN?GQLC49K.(E9%I<$\!DJEK'A.(-\NV#VN$^]JQ`'O/%
MSD%_#.4S//JRW"[W,,#\<RED8+Q:/::S6(LG6CM&2^DLC+AE.SH^Q!\#LDLT
M.SX<$6\X"(1P?+_:%O=-9:@D*)T6Z`ZEFCZ)ZM:A\CUO!2]WKV_@Q8;L'2'C
MU0;W72.+/ADM5LL5OD:4<157*01E]:'`ZR40?A%]V@C/6#S:3.4L-M_N\8=3
MS+RC1;3B,[_Q#E+^H+B?FBU]!#%5UOR=CWANO[2$2IU$S4/@5LG7O:0V@/=A
M9(@AQ1!:"%[LT.)H0%*<3&YFGU,S,9V[:7=XTIUY\ZRRQFBG6.(:S7J*IGX.
MP^4X%@&LOVHS"G7P8>HJQK*ZQ_^IB7\.Q#]JA?&5-W,@1L@Y$0)J^3#Q/($@
MH?J.+#Q5\C#1>D#*_D,`LG_N)@L"[=Q`[`,]F$%=;E7JK9Z:,1G=8JS'\7P>
M+E8(Y#9D[8JD3Z($24WOPIFYN.)G6I#O>A)9HB!2I[-;-26@<:QE,_''71Y8
M3;?7>:`]+RYK1?<IFR-[_:5WC#D"P\5D^<`:!7L*#<N/0%7/)!D(R`LKB(2D
M@2TCN(A0$H)V.MDG1)=0\<55W:=9Y7DL?WL7QJX*M%5:U*XV=D&WV^BCB.^7
M037+$7!10=\@MO&G>?&SZD*,TS*6C#$+!+,)G^(US>*9L6W2Z=-);W%2\GD]
MWKW;-(YXW^L`'BKDDY$3HMH]FA`DC.+`>BA.,7!)I-6T8CH^X?G02&N)9;PU
MX.4YPK8A<V8CDQ56F7DXCY/'^6B)O&5H3[GJ!R;_W+0%$\3<<]91M*Z3#T32
MKTK":Q?DF^SR-3SRZ5!#.['5$Y-K;8*C$:A=1YL%&N#)8;-I@*><@18[$JF/
M]7*2O7FWSH,G%\:P)'G7\.>=UD9@9BD>D'BSGFKF@`PN/1J;\8+5$Q;QQ'R9
M0U_4V%'+T1#R5L9R?O3WG.=U,+WGG/$1$.]\<J-S/`ZM1]NH\\SQ'3,[BMX#
M'=_%#_:CFFNQ=W"+S"&<9!:;IR?64QULI<VF%,^;Z^-U&B84"N0`3W/C=6*0
M&C76`1Y^"<?.`Z[&UW???4?1^1\/\!#Z7RZF">]17:2>\Z.(G&(:5&6Y.&7V
M4?&I9@HK2(8PU3L`G:[!<^=A8KV*DJW'S.GR-HG7RU2P%-:XDWO&=!;?1@LU
M$R#!ZZ-TM!*QH)%:@UM4P6OV.DD\G;*RS-(PE.?W/$&K]I;;0ED#E1F>XN20
MF-:6T3+,W@<D#M[8HGZB'8YZ&SJ9E]`%S.YF/;!-C7LPRV_S)PF7")HX;(<U
M>X0^BBS94!:JZ2[%'P^Q5O1.D\-IBQ1)M"RK,9ADMPFE4%;C-(?CE9(OWZP>
MM5T61/C6"T?"Z+Y[2*)5J!_78N_*HL=?SLQ!--]H-DJ<#1&+0#31-$X^$X^N
MB@$)+TO?6AVJY9KAK$F<C`_-9JE0>&<4X91@0^-D)=8*#(X*F#\:-5$C[Z%J
MLJ!>.T72\R=2S73V/^P]CHV?>U6")N0,Q@:8]_B.&S@L8$<!'AD3-D,2QZM2
M.[?CY'&Y\FM=BT[N)DA"0/KY^/"7/5R`Q7;8XV+LV_PD'KI%6"VB<3;`$3#L
M]WE?&-K1#^V,'8V'T8WUN$DVX/7>."[5&T;M=L/%?93`03/^'@S,$MC4Y\S-
MKNQ-A7'(9<>R"9&,ILQ"7HQ'2JWQZ3)O9EWE*CRS1(J`-<,I%N@>$4IK[L(M
M"7<">IP7VP+P/MN&0R.;_'0-!D^TE=(K-I][72U#P+,-)P.HZ8WD0,G[5"P1
MR*$%#^>L1FSM#%*2V5T6(I^&&>9=G*YR?8J?4DHT,8P*]O_5=LKHUL@>;:Q;
MW33Q(*4T3J8K'K2%"58F.!;)3>!<;JF3V5F))1:A-G93Z$%:(<$K)6%FLEDK
M-@0UL[MD`:C3%%"H1&_#XYSQ8I*"J[\T,;*4/0U*'"I)HTY'^Z9RB+Z![%TB
MAXL)+"+Y#CIF:.;KD(EMC>-R9]/=H0L83#[98*]MTW8CF!G%);V+)N&&1>4+
MGD6DU)Y):0N6N8D7W_(12.V_SUP!T)<F<)@(QWZ$])M"EP]W\S4RJD:IT:*X
M09[)<VK+/KUI(?#M`6"-`^L0PMMO8O4!BU+?LDJP6JY7,[D/2R^^'D;+V%83
M^-8!1YT6KS*)A0O>4?#L;K*Z`W,A4@ZT\`)AR:G8T;:R(P_R*<QQ!+9WRJH'
M!]3VJ]J6U$NQ'"6CN?9^S"$!+MZ4!",8)?6[<EH%("/>VR7!7$P9;A*7"7:_
M2=F"]$XO'Q7MWF)Y<+Q1:^B/Y\GF/'E2<Z9+S<D67@/R\8`\RHD*?ZW+VH%V
M8:Z0F'3:UCC)6*^WP]FHLDUZ4+4WB7TE<R3?D;R<6C77*58T^5X?46U)6J,I
MJX?5HE[(H7</D7SNB5,>>4Y:CG$]4$KXJO`X),G9(M=)\:,/]-T(>R"91QC.
M/H)U.E)4`=M-W>)^[&NYD^.R+3<=+U;:>+,ML`Q,%=JB1V]Y%#)Q7^3`#DLR
M-O*(R%N<8FV//IAGY5%%EUN%]0FF_"JU^0AG)7=2E6\:B.E2>!+.`BC>N97V
M<!<NQEFJW(L&U\MD92?.0F/M+V;?F7@Y:4L>>%&W`>U:GV$^LEJM78N>`[75
MD+!8$$1^L=<R6>;Q)"0V">)E:!M#&G_D#-*NR@DY08`$X3J"Z%7E&2O%I^H9
M@+43'&@KP^F?^,'U6.E#N%.,0@V?8]9.0G@NZYU.K\$EY\=!L.>F]9'$*RP-
M0;Q&.%YC'(,M\/8211W"-WIA7,"#$>O_H+(KONKP<4ZA+N-XEJ%>L8\<T_`M
MR!T`Q@-^RU[^83EG3:<5H+((E<>YGLH6./=1K%[<$@MQ-AX3[<UO+I)@5?]<
M_45YT6&5L'*%NCB9\D0S3PT0SB9AZN(_QNO%K040I9]&"98\&ZE4LPF9U9_"
M>#JK40)8LKZP)9S7%^U1_2.:CVY!8-1YO.G^83"MZ!\<67B1B-1)Q.S&T6-0
MV=:K.V)*0O^6R--H,0FBA2C.MM[^[#]J3W:Y2ABUG@<LLRMJ(:,#X(*FAY\V
M-+ASI9:#[[YK+M)\G:SRE`,"PFAEF7F1-BF8KFJAHY]9OE]?*V\[<^&_]:O5
M+SQO*1EF$1@BSTA'Y%)AHNT9@Q,\?5=8%M#_#G_M4\=ES5+9=JKJYK-GC=#Q
MW7KQ.:7YLA'L%,'HCX3OGP:5[5SX]%:$[L*Z49*]N'2;?:AR-XH4SR9&D62)
M[L,DFCZ^1HE<B8:I'+>EQ3Q_1E@0:NM%ZV>FT\0]K$JVK7)PN)$!`A[PGGT&
M'>69#Q)++KDWV).,:8*-:RX#HO-D?3Y]`!@^<S>O27@/>TNK@/W0_:-CD1KI
MCX\*ZQ*2Y\93I?R<7@`6(E:.@MAW+U=9=!DL`(V#I+_=ILJ9&`45-CM+SJ("
M\3_II<;21Z;[&M^;6XG`.54,?T[CUS#\,8VOQ?`2>YL0&.JS65"6P,QLP8K?
M6D^1=I%,EZ/)GP_(H&*LJN,9&=>'-^H\7H4Z1M:FBW#%6]7M?P8Q1"`(QHM,
M"OA/`I9(H`9-HU68<86/G#3K^6DJ%F](OX>CF5E(5VYN1FEHBJ:+(V(FP9=Y
M]4_X,#"$M5CG::!;!;K-EH"JLT7,+,GU4+UQ(>Z7H5==M8$,:R[TWGZF>7@N
MAI\`JYUWR:<[\GZV/92\R-,HBT[B8+L'V5!&&0(IURSX-OS*6:7:)+!+X5.>
M]C)9ZJ$U#^&0%1+TN%^15YQJB`;E];`J:QPXEJO#,?J:/)W[_/."Z,T](?9R
M9O.LC@^/?!M[`I#O-=Y$-V&R>E1+Y,.:#P5C,6*C:1*.9QF'`V\FR"G#:L(6
MG9H/]4D1`YM\E&AO`A^>%>>?K82D=\?-.IH!E_N*.I5FJFFT6B71S9KI)V8%
M;0=JM13L[.AK*6[[3),PU,E5P"\SE\EZ:2(59/)-Y<3;%"9[T'-@[%;LD[)O
M*J?'Y=G,2#Y.A1A\S"0=.4TKW7I\P$WFH]7XCMMM[*.Z)U-K6)[B[L>DHGE`
M6!X20;)>!#`!(SBRW'=QG+(1%<Z7?':0B*4++;C,1Y\E#WCWVFJM\KQT$Q8"
MO*2B'<;Q.CM)U)V*X>5WQNJ+7CG"'.:XE?Q$TM"_R2J6<+>7C6I^$9SB1.-D
ML(((/D:)P.KU*AJ/^>XKKX23Y07$+Z,5N/7+5=CV[G2Q(\OE#MHO`E/-1^L4
MZS6(3K1:)PMTV'^1?0H'N\LDOH7#0&+H8&33$1,<5DIY3%\F=Y/1KF+EXV')
MG<-!.AJHA:OIK&8CCXWL,MP-AP[(%%.&3QTS6=W#N<;%+/X&13,+%]R%7P(>
MC.SGVA%$8M<S!9BQ304;U:=E9)W[=,"5`%8,6V,:'J?.Q0;T(I7V`QV52QY4
M(H\P1>&-TF7"_IU6M(OS9;3Y-$Z8TH:/(!`<@F"O4MNK'.SLN+G<%V9S/PIF
M4;K:V:ILDMG^CI@F:_E"W]<'4FX:`>__426_4@]&D_]`T^3.%OGC47;,>GCD
ML<:.]GW6F&;$W,2Q=M)WM.\IC^G!,?T3TSU_TVP;RT`:I>!SHFTFG&$PVYX6
M=Z0"@>"]>:.V6PZK5*F$VX@.FXQ6H^_&5NMJ(-6R.,PENIE-LD.>(PR$G_!<
M7+3>=)H!KT^WUVWM.:GM[K#UMM6ODI`:"3D@(8<DY(B$').0$Q)RZD(ZO;?M
M1KV#U$="D/I("%(?"4'J(R%(?20$J8^$(/61$*0^_19:&4A&:@+)2#4@&:D#
M)",5@&2D])",%!V2D7(W>I=7G=9'I.@2@I1>0I`*2`A2!PE!JB$A2$TD!*F,
MA&#U>5?OUQM#=*1D,*Q."H;52L&P>BD85C,%P^JF8%CM%`RIW[M>I]/JMX?O
M7-#PTU6KTQH,@HMV?S!TX6_:W7K_4W#9[E2^?PKAAX\(K-<8UCO`DP*A5.]:
M'X./.)4`D51_I:G^BE-EM>O4!T.KYAXR?MH]G89,;3?@^WS+5=VH_O\V7G['
ML,0D4#LEX5LRMWA9[W[:R[\&PWI?^VSTF`[5$^K]OI70:)@)@T^79D)[V+K4
M/J^O.M<#_?NRW342ZLVFSN[ZS1#D44NZO.X,VU<=O=C-]H=VLZ4E7/5^:ED5
M:=2'K2[[OY;:[>E\.\:'CM=ZKQ/ID+<ZS5L=4N_JU>CIA?EH?+7>?S"X&Y]7
M]7ZKJW^W^HU6=QAT>@TD]4.]@Z3V6Q=(:K,U:%@M]*'5UZO3;UVUZGK"F]YU
MMZEWU<5UMV%R9]W5-U.8Q-0_.4B#H9YWI_[&E!E(Z/VH"]'E5;.W!\X#QZC-
M4]O2QU"\U`90;XGZB@A@4-D5/Q"_#V[:"6@]B5:/.@J$K%,L^(@=+5;!*$G`
M.T`;MRRU#HFN_XE-J\JAR`HSX\EV9M<+'@=4D0J@8MUA:XLW\6H5SY'*\MVF
M#*T3+FY7=^=DJ_%341&G67&'LU&1<IX9WT9'1=E2X<#62QR$YA6IEHE6E&>.
M@#9@JT@+`:7S-_V?#FW36(9EU-UY9-:83\V2.PE!HI9Q)3^[,L6'(:2:(\M6
MYE(B<^`[7)5M\56YV3.8QM,I#V`>O(&,^7+<1$A&BUO<A4''VF4S!EL%JA-N
MF;/P)U`9,Z#\*<'<A<`Y];:K;/%DI7UR769<Y"R&JS`MR7$78;F;\017;'1%
MA*V]QO$\\QVVEVP"5F8R9IC?LD5E-AD?GY!P4'/,J`QNI\FJ(35N]GUY97[W
MKCX9"5?UZT'+2!D,>R9-O]Z%J<G`Z3>O3:J6DS+H#QP<.X7QN7#X7#A\+MHV
M'RL%<)R\7#X=AT_'X=-Q^'0</EV[.7YRFL-)&?SD-(>3POC8U7!2&!^[.9P4
MP''R<OG8S>&D`([#QVZ.GYSF:/8NVKT],Z7CI%Q#BIYTT;N2QDJ6TNCT!F9*
MN_O^VB)[4V_\:"*UI/&4)?1;/YE$]3>]OCE2ZF_,G)AER@QO*\DJ3;U]67]K
MI70MMIUZ_])*Z;UU$JK[9M)ESZQ!O>LP'K3-QJH/ZVY"S1S]=B4;=HT:K8^6
MPGC7;/?-%+O\C7=V:9DQ^(.%8^?3&[PS$^SJ-`;OK1YJ#-N7INPU[?HTG2YJ
M.NW4=!JJZ;944UGZ>D+`C/+`*40G>-,:_+"/I%61M*Z;]@FA_830?K)*[535
M:=1FLVW*7K/5OW`2&E:*)0$.#UL2F[9`-%V!;MHBTG0$NGG5MW$&[;==.\5-
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M5,.981KN#()8$([N;R"J7AAD9@<[-@%+LGFQ)+LY15+-2G-Y.;-N)[`G#Y[2
ML).L5N@$%YV>)?@LS1XOG<!N+)Y2M8V(J]Y/CJ"[HM^UB^XT:2=P&T9(FC%H
M>S\%#7/Q`$G-IIOD8K7=I/?OG:2^B_57).FOED!\"!H-)PFPY%UC9.F>[P8J
M&K4?R!#>3I/\T5-KV;Y*PE"M_6LU!&(3P(5R\$S,-@SVCPFPZ>]C[+MQUT9P
MV10[B#__(L)E805SMBONPR2-XH7('W6"DHXA`B](5PE_\46$/\4RR';!DM67
M8!).55OQET@`+8`G,_B[NV[;9=L=A\<H;(O/#<%EO<\4%/]K-UO=8?N"S;]!
MMP=[^/#7NPKR=(FX->RW6D&G#8=$\N-#JP%B<'J&Y_5&:%QG&R?'^-!KLP7!
MIZO6GG*2Q;#D0;)$9']PG)E_-<1Y8)[`BC7L]7.^QT3Y6LSH:_5U5F]ZO4ZK
MWM5XOZMK^5[UH"A:`FNI"V;B#?6B7;38Y-IHZ4A;EZWANUXS2X((V5GQK!NJ
M>?'XSKW.)L](/C^'4?79F.LW=;+K;KO7U1/>7[,Z.ZFL6-==MD0T4SOU[ML\
M4W,3S>VAAA`.WC_R=]X_*F$P[+<94_X);B2G.,^L-,U6@UD7G?J;5D?^9I/;
M8"A_0]GDSP^LK\2OJWK_4O[LMP;7'87,Q+G3E+_9']A`@ZMZHY4GR?+VNMG)
M#43)."($O#T,!$N.R093ERWVF?2I[S?73`?VU9?L4?6E/F%W4&5UN$\(`Z]R
M_QH$F^-10L,+?\V6V6QVY".737_MBT_9)RLB*W3V!2.96?`ME02>TT1_@"F8
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MLW.YZ%UIO[M!YT.]<ZT3;`WJ'UI9%YSL$U/-==?$JQ)=U1]JBJ?>;.;#/)^B
M<Q'N#L''Q2R1FK>R$<V65#D4YC@VS:@*PKI)^X2_*];PK4:_==G*%!)+:G>M
MI-Y@Z*"Q-!N/F37U@*EJ4W>S4C?JP\:[O#U."(4'J!=MME#O?#)8O.T->P&X
M#?2N69Y&AVS)23=+XK@Z0K\UO.YWM7;\:$PN3(M<Z9_`C0DCMPNU=$ZE)S*3
MLD9,"H`0<"W-C2A&5`<C08D0@V2-`8P;P=6PGW$]<)FJU0KX!_%1>\TT/"LC
MMV\;S"#>VA*/+F++`<-G.S/-><`,Z;<-NL1#*&*D*CIQ7"HIX0]93>38/$9#
MALM7!W"#"&[&!N/9*$VWX.P<-,N;ZS8;]>UNY?O*/IQ6J^_@H@_^1=VFD7AI
M?C*%<EGO;'T]Q\LC?IL9\Z*))QRWW+)-UPO^7.J6LX+A*-$BS5<QU=H)B;"5
M%9&'*:D+$<@381]%^^[(A#SEPD:!A`LGI6-2=3HV&1OZ'^TTT!5.PH63TC%3
M0*>X*1=NDH4E-VVLE`LWR:H+LPSVM)J9GQ=R-R5/`"-!_^8[*YHPP;Z;P?_-
M7UO]GAR:>2(_4K<2F0U@MJG8^]52^EE2GG;9NFS`<;R5)/CK28/6T*1DMC0_
MZ3>3NDB:G0%'<]/L3#F:F\;WF<TD[HIE)EV]$<MS`^W*H6Q@:>\<;BI-:VVQ
M2:6CM;N6<)K]`007-H4MS];@`9J.3=.Q:2R1A),)V-?3$RYA_TSCPN;_?NNM
M->"8`A_`0D>M77,%UOHX#/CYBJX=^F\'[-^+GCTD!\,ZFW+-?KOHLW5B`#8$
M/]#6A5+,?QBH_O9M7YC";";O7<**%T6[NF(3,A3'34:R,INS-?S!$K%.K_O6
M3AOVZU?6P(2SK'=U4U)8FEF&*S;DK$Z7AV#VX%6D1N)/_?:P95%G'/6A/F`-
M51^VS-)DJ2W8K;!`';L511*%BO//3&6K/-?=GV`-"^MD@Z+Y4[U_$30NZDCJ
MQ17KG[?\#-%08LRN$0@,RJ3_KRUKPNGWWN@R9`"9V(+C+0U_A\E$EAK`H3PO
M5<\<81_J?2[]X&IL:[LF&)@N@%F>W$HPDX0KE%'BJU9C:#5G%SQ'<K)6PTII
M,I,0Y,1`48G?5,[0_6'8):U46)F$;=/N#K:,V%(>"T78)OR"I\'@%\W`$2Z?
MW-2"6!&5W8P:[I@3U&"M8(6U'$DUKO#3CF0F[;OYG!M(%9>(52KB3\V[[&1P
M06NCF/_GSY530:."3D3,@@QA0WZ5!M/9Z)9A5`V,S-$5A8XFDR1,4P@8CR/<
MQ[/1*J*@$'HX7LP><:CZ062=S@-X4V45+C@"AQOD*46ZB%=W2?R``^'Z;33&
M8<OUS8R$)=$]/'9/`.,5:V.J0#?Q>C$Q@#IT-EK<<E"P[U#FL*H'5O/`#CRP
M0P_LR`,[EI4PJC%9S^>/`O!5O+;@[L=;]R.%]-Z%X\_9_60QC`&P9TDX<A70
M>N-!'$<5W6QV"\`7,W0QG(R>GC>\'8$M3L42"3Z^Y>7(7+AK[K:'/)XZ1HX[
M&"-=O[!2!N-TQ16,JW<JXI_S'"A/HBJ[R6JF8M,8+P<;QVFS^$&X8L/'771[
MQ[VO*S)3*03'9U@%[!4A7`O/C_9.$)#MM0[EX6^A_+Q=/:O\D7M)QU-QH7_G
M3]O&)U/:7T$5S;COLE"?<%B%%2&?&O381>QG-(W&HX4(8E;9YI(IHUSS6%1Y
M^!>2I7CE8,14VEUEVRA.)E%.JI4`MYTE-Q,2\A=8(HMO+NP8]KHT.GP&B_!V
M!-?)"1(>,&(:?:&9&DT*J)X"B+;B^4Z3>`Z23+49_P_6'UL4LS7.S7S+W/S"
M^2,9K&)1UOP>O-.-="=R#K-)^&5I%2^[4&]D"*&#Y4.H-KIX2-9N3T8PVY2@
M)#[_!OPT6MPZ^&C'LJ9B9E8TARAZ%O<LEH41C02(QG.W;7P2R8FBE`GO1L*^
M7K#236<Q1)R1;]X68:N&LEL&(^!B*-F+GBU"5MRCA8KV=&B^;&LI&Y,1Y\,_
M`_54$Z+#W)9DN1SZM*29RX1/B/M$902TZH76O-"Y,#FVA$7,Z\2PD]%8S'`6
MR;F<(:*?U61@UJ[R)V/2^.5<+BVV+(/[?(ML2Z6:8+ZK;#N&^IYKNXLV/?'U
MG#T71_,YLQR%\$,K,$/0'@#X;'1X6O-DPT?'%]9V@G6T`,^5$E)A#TMX+2]<
MP1`;+;R30X88+9R^P!#Y?!/=%ZB227BSON55V&A\CU;0[Z9-A[?B\9E[0"56
MIKI%);KGZ::6+;V*7R:41F["N>CI>479/3#`TEMA&3-8F.#9,L;+6?CEZ?DZ
MPP&JB:YQ(9:T*(3]Y,0HO>/OEV7N8R08BZ42W_"[D_F;%4[,LQS##IH";:Z'
M;'5"\6C,Q9L7GNRS*Y`R*>`Q@7G3RM!H\#"'UI@F(NNI1$0AY=BL"]DR>27.
M8K1(WI*&L\TC#V>A2@G6_)^,]VY\\S>VM.7!R_)$"'D>3/G&ADH2O+-R\Z$<
MSI?J]VC&[*DY*R5WP;.6%W81M@6WZ5J%U((!FCT^K^)ML>Q-#();3K3+)XR`
MO_"Y9:U?UVD89.`_FTO?^>CQAD'GR]5C(-KCS\[Z5X^S):!?W;!66=$6X8,H
MW;;95WF0&Y0,ZHR19&\":HHT([H);Z,%D9'X#W:W-?L3O+=W=Z0MM*<Z(&OY
M'5_&,&$]-6L];T,,RI`95+*@!2TU#^=Q\@@!N"=NH47XIYH3<E(;U9RY8B:"
M=]E<Y`^PYF6,*(6OPIWA!'MR*<IO`]NDXWCYZ*$4V'(SSV"$\-E_$B.SZKB8
M6FQXN&&']&8VPD8%W0J*\#:)'PKSA*!.;@/H+(JK[_`PF50+"@*$P"(`M6F7
M8+E*RE?$)@93M&3FB`Q-F;RF=UZ!Y<^X2'0Y+8C]D)(T21S/?<A&;7C,2R\%
MW9&\#Y@N3ND!6+(CBI@4]T;98MCT?""4(29T@H@V6M#8.7HVH_MH],XT)_2R
M5+D%4I;"JY-S$L-M&5'-^G2ZO9M7(I^T@[O18C(+DQTCWJD^3R@J".;)B=9)
M>.[<83!L5![OPMJ\O&/+H`EKN&@:A8GY=;Z%X<@C(GWS-5SDMKL9"P/"FZHM
M^#/2.);9C)=+6+Q,(&>GE!6@"#@)`M7KL`N8,MXZ7T<Q\"R./Z^7`3R0SHS[
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MPBH@TD2$[`/RLM#)8?%IC#F<RZR@S4$&L?^Q=3D$,RUFZ:RQE^MD&8LUG0/C
M.Q%Y;D9V]^&X.#=SB\'A/^+!>KB..D4O2!DYAE^6Y7*4.Q0\B!22:[P,$Z;B
M4RWS(_=ZC94YMU*+LM>'N)Q%!"%QMLT&,^Q;$J?%G!!&V)\K\-P&WD%)BM8Q
M7=_DSW@@4-8$?+=`O%CF=HPJ69Q$M^"`()X:K.*GEGJ+P*A_@A1R22,**[<I
M4``$YB*JH$Y@7<TK7M:P$I=)..;JF#7W6>98H6\$\IN##'IB$HLM(<H%`736
M&,2'D(%%&$Y2L:4+[45R8MVQ2,4[4C(8&>Z!P"8'ROV`+=9842EQDWM^P21<
MKNX8M/:_Q#O!W-I)A+WJ>E]D>U.XDI2-LXI1<!).PP3>]300_L%YBD7RN;6S
M6OE:21_G;/)!^8'7$@J81XM[8J]T/OI"@;A-SU1%Q"/=H;31PHMP$RVF>-47
M\6(<+R,F<TPX5_@(UC2-;.91"M'+SC53BO>;.%G@/],E&X[3:*Q4S_%1H>H!
M;ZUBU:/O<X/)IMJ:3U5LJ+-1CRL,CVHB5<6I*63"OH##/%Q9+"!&.`%-PENH
M(`Z,X+TKPBD)(KLQPV%&:(7[*%FMJ4SA^8.$=,URIR^S3($((1[<<4./<CR#
MCL%A$QA60;Q>+=>K8H5(N7B-5S&1MT28D`A,HD$&(ZIY'L+19Z+VK#,#&/OR
MM&Z)30T15_I\[:RN202PA'GD*TN,0G@G94OAT6V(->AD1.AX]0@$,57Q37L1
M:%*!D8LF]J<S53"+DO*/<^<8I,FDIV&A^C9\"/D(R,G^U\U=.>Q$$S8^S6P)
MIS/\WDUEJEX*XZ?@ZD/Y3[GS'W3+X;FI_^!U.P4\/?]:&0D?KW45MTK]AADY
MN7D-TN1V+=??Z/R;KF<X(:R>(V)>=*Q<#"=-P_D-&/)DN=-0#%UZUI8S@VF2
MHL>C;O(LN@\#'GHTR/SQ],[7>C/K\]WIN9Z>9R&275_B<UU">-?6B`5'M)B$
M7]1\J<8S/:/#E(7-Z)B+1>GUL.[5F#L:FF!U=*Z=H9L(PFROJ`@=3LZP@E0K
M22=O?36>[]F92+SJ\!\;P*T<Y;YMK^`K\!\;P-;:%?9_.QD\Q-C_[62^\!/+
M1P;ZFE\8E.TVD8?WPW:@QP?A">WN\'U;WJI1">_LA(&=T+03ABI!I%P[;*\=
MOM<.XVN'\[7+6L6B$'?/C"3YN(:6(B[TY^G=ZTXGD&$^%$.XMZ%SX]^<1'R_
M:0]M%)64,U8IU^):"4]3%XS-^"8&2%RU1P#-WO6;+(B(`8$K0"98P!U6+@N*
M5`O3PK_A3JV1,X3CL!+99[-]<:$G?:CS\#$N:YXJH\^(U,.!27EH"L*'4U-X
M/AR:HO.A-C"%XK(.]W'TD#8R^:.^TPK#H7([BV_`"Y']3G\6..)VQ^FI&QD#
MS@]@(('6NX7E(#Q(_)F-*#Z>HM5G?H:T)W_+:PUZ4G;7P<"#1T`=#"-5GI`;
M"%H:G(4[<#T1?M-8!H1982%O)3WJLEMC-T7?0>5-JV.D/RO>HG7/:I@_5:D-
M6/-=KV68J/?(#'\)`67:,3&@6AG%2TQR,N`'4?#3.N[A%>%'D.(LP;R+D&>7
MX^4+63_R]JZ)'O!WXQP2IS!P-B\+DY?70>!3"8$@7A%4\XK;,&)<A,:F,_8P
MH\447&/*4!ED_!5,N]I[\L8%/`1V[J('<*!@4PA<!!GL@UKP$$VL(Q'+OT:C
M$&Z$H@B$,Z&%;;F`"E+9^"Z%,BXT/`^VM%.VW;LF"':5:DJ2?6YX%!6;VS.;
MLA>VB%/30CH8N,'#-.L'Y-Y-9#W:F,NV5&UB$+J]S'$R!8A@\1,CN7``)0':
M@2NQ[$181X27&!5&-N3T_&1&<8)D:C>!",<??5DO;62RJ;*]23^:MD?I1^3*
M:!$'?U^/9JD'CQN21<P$4DU#\W2Z>-&C%&JV7U(*>QZN[N)).5SQT$$Y7#F2
MZ4;(:Q0LPMDJ;TX#2[B1ST-X-\*3ISRI*T;DN[5>-'/9G]U5XR>BQM2AO]N8
MH0%&$()\X-P1;%C;CR+(D:305W5%W`W<&:&['$3HKE%"="N_OA:GL'G"S9:E
M0C-40\9S%C_HRAY'4AG/TQNL10V<]'9!XG!MR(PGY0P?+#'49#5#,>U=`),J
M'\:^1L]M`L8Z<48J:34)4T=P1,I!602B/+D,R;.)4G-4(9E=SC"Y#2W*U).3
MP#<+2.!SGZYP.EK/X/QE%DVTLBUU$GP^U,E!=LME*B]$"#)09>HW2DW010MX
M@Y/(RW*7$+/@<@9[Q\MPG'(JBP`E%+,CRV&IDQ@H$7_*%5K.V43SM)_%($K-
M=C>-"9>&ETOZM&C9462N<)!=]$VEMG_J6_EDXPR&(AC1YJR%V^I"]GT4<$%B
M'[V"2PP]X4F,#&W>V;/18[Q>F>,?LO!'1%#C/QS'"5MX"AY\JDJ%AQ<OQ$IL
M4?/?8BYV#VKE'"W/:Q7V3;1B\Z.++3/,L<VSO84\,U=P#&$R,1'$?!PN)G!>
M+XZ1TFQ35+`3"Z)%.(;CC.01+A_ONE6W_+Z@5GQ%.)K\;<TFA6069>^*[\#5
M)IM^1[,E7"B<<"5PM4L#X,8:G!'"&H8UH$_)/J["`CQ>6`85:$`@\'(58#N1
M61:1Q2!:/85^`<\W<]M=B(J?AVV/L58/LC.,((V#*1OR6..?XV1E**QB\HXN
MQ%_.1LQ^YX>Y&#;:%S!Q@-Z3Z'-]Y\!<=(#?MRTK:)'<29OK#&X]CD?,^K!7
MVIJ*.,%WU5SE(I:;0L04-SMO_-P=7&Y$1^C6A\`%,#^VI'0I'$**%3\Z4)@F
M8P9%!-ZD#IZU"P-7*0F+Q;P##R:;.%W#5X^_@I'(AY(S9PL#3JP_2:1LA+-1
M%?'S(8*+#R<?_X5<4*3L$$)TC+%Q"EOE:CMWH']<ZQ]R3SU#M+ZOK6\>*?I'
MB.T$P1[M;5^U8`?_3QG@QR004>%KN%>BTS]LQ14O-]@<X423:#J-EQYU*WMU
M)7>O<I=;LPUMT<O(.(9&JT_GEL:#R#3!&E_S:!B3^&%!XX#=DDV*K!#.?HDT
MQG0<5!<QA;4Y4JJ;(C4D$C01UF,^^A+-UW/I(Y-=9S`"1!G^W"L3R=Y^A8A-
M\<+J5EM?"AE9I*X12R#/1O2&[B()Y;5MW/[E*W#AADN8V+SNJ1]';>?_&B;Q
ML@`G7H1+JC0*9S2;`5Y:B+B,'VHDDC"^2+!0T;#W%L[2;"XHVLQ.1_=BT4VQ
MG48)6&=LP>T.>XPADR`?2R[/&@[<E<2[6D=:P!4O8TSK[+;%J;L@V%$&D#6&
M#*2,ZPY5;<";BOF5P>_59H$C!AI;`WW'*J].(W>(F'8`(^<NGH'+&-FOS-9@
M\W@X6JR7*=X(HB/7-^DJ6H']PV;'O/F1]:)%R;<.(-Z9_VB(B=]-)"PXM;^Z
M$;+9TQ8^Z-/U`A2XNW&&8R]&21(_Y+M^D8P30EALT#/S_%S+C/>0VT<$I6@9
MI1QI`GPC&VD>"LO<58)EE=Q^%0)`(^<;5E;O9"%YY#]J5>`:E+LVJC$9$'M8
MD*^49SX[L=4T>5PGG#K5=K;T@?(BRP6Z@YCC&CZN&>O18A%#>W!74;W5]#U$
M.,UR-#S*.%K`#)R[T%I3SB)<Q,ZPS<SGF7+XMW4^A#F)(,`>MV+8B!TA)\OC
M=9(87I/"S:8`"7[(N^BST4TXL[463$C\F"?@A\H+/K\S6^*HBKY-A#3)]B[O
MH&7"V''E`2VS0V[>2!4<+<0YPDKN0K*5F%@4WL7Q9TUEHGT`)ON(S_WXV:"^
MMI.(ZE8CPD]^@/9>CV[#[/TBJVEE9.[<R1#9&]-#<ID>H^C\JPJ3'>HS><T.
M[K.@#\;"%D9_D#[.;^(9;VA6"NQ@%`;CE,>F5((`R-SG@6JTC"X5`UGL7#&5
M!P^,9T9$?AA9AO)1VPUTKM4AFQ!<A[`F",$S(%\,6XT@]G=AZ]KP4T1/$O@I
M%#-T,U]*THCCVB5AS?IK+%0%<NPIAF;`SRI3WR$#KXW$%OM1Z6J^DI.QR5A'
M#3EZAHC472&"U0*86*4?1LDBB*9L&N5Q0M&%O<Z,MZ6X<8D@@<@EW!1'BZ\S
MXAK&E]-MO(I]\%$Z]X%%2[)^FICJ!6N@Q40BTL45[(2-7`8KFMJ%DP+`#'JX
MQ,1=;W*260P3BE'"0GPNA-&"6>^0X<-=F-CG]%X6BS53YR)?3R\9^8@L:.Q0
M4A3AD%G+[9Z1Z!"1J<"SJX+2\/OF3\&'$3`=S;1``!FALW]JTZ<QG)YS%Q1K
MXM"K+:*;8B,0+@7/^7[%*)K!]N*:/XWG.10D!>\FXJO]-(`DZ5EB;FP0':((
MM:&"C1>N+$8WL/N8Z0NQ"L`/R^08%%9HP&^K)+`FPJ1C,2E$E+LC-_'D4?>;
ML?H&1C+?6A.1X(01:#*R^S@SA60*6^??AT[V7/ERW:8*RKJ=7TU<Q6NOKI/M
MP`--9/VA_FO/]92"&J7HK#6:")CF\N8>^1F<N9VY3N]RCA*)'Z%HBRB7`\9"
M^-Z[.6_`3BSO(21F$-[QI5.^='5%@$]Z?-1"=XEH4QD>A+<H/LB;QK,)*CSB
M,NHT6B%GA%:CJU"3CL^<??[B)&6+)<>R6(2W9?F:3#0>\_7LY<IF]-`LO8NF
M*Q]S)`>4N>N<QC-(7CN#61*O8.WT`CD@I7\EYF*2X%?RA0>*[1KA&M@\3.4*
M@IBN[JPS&'NI(K>BN/&[3.)YS,SP8!7OV+HF&S>!7-R0^W1\S<7]-['YD$/E
M*C"&LU]CYL367+Q\TFGVT465AWC@TYM=J$&7[H^/UOK..E)E^DSJ?6VC1J_]
M,E[F"*:3I;WDL*8GFQ'+RBRGM;#A[RHX[:>@J]$M`92>C/PRE.V@1U@!\@`3
M5M@QK.C%727\).TV7.57F=#)2`'YM#B=P67Z9=Y<EK+-GST0N^NHTY:(GY4&
M\[7PDLN8XG7B>RL@!WA9MQQIE?)/K!.UW04SP`RR+<0JDKT2X50EDXS<^UON
M#SJ3"YQ,L1DHE6.2]IR"%#81WM9(O[@IFR83%$6(?!*F87+/5-9H-<*F6AF\
M+-ONP;M(Z@X5'@+!2"/8ORGCN"A=$(7;=92[IEGN"';N93PN^<&3U^O3Q@JD
M1VE);$W3HL>54$BNPA!8[B"@P@VA'@)Z[^4DS!SQXQN3C)85X<FJ=5=1PPJG
M.(@<Q'M,#Q^$V,-\XR\+W*0CF_MC6#`G#R-]<VNO`B\AYA&:M$TT;'<FOU8^
ML0M!+()L2F[<%^XQX`>QSLZR<2YH`U</,:Y72D7#<B9A"<1[*O/?AN`#O&MA
M?9%B%P$(U*"&(<]'R6>!E(59RZ*CVGW$U.7?F&#)1V-@6XZ\8*#A^3:%>!R/
M?%,6X<7+QU:U9&;"?H$W7!P1H!>`%GY([#5QWOEV/*R#F#J,X.D@HK@FA2&*
MCC!;I&RB8SH!]KSG^.H=3B]82X`6CF70`]0O:K86*@CB$L3.MI<\NLUOB_!-
M@S2`O01N^N'S)'0H]$&.1W46/Y5@B\!4ACZD6@EP`AZ\#L5A+7T#YSX%:!#Y
ML0B'V8F%*-!F13AJ=M;Q"K:#,IK,UYTW#6JKW=XF_*T2&:4?5RU9?5-Q3"W9
MHKB1,'[XZ92*FL*RR':5"LK.)JD[F/JA0UD^Q521<$[A(@P9\5A@9&N[1XA$
MUY5#Q%@&Q(XUQI6[;R('#-KTQAM!S6;XY0!C%N8Q_L6BSII?-*9BFPB;(\WE
M)$$:W"01RWY3!G")8B':1U':"W0ND\LELZ+YN&?]R6P#<)61#JK8SG;6&E+/
MJG,W^984**4M%>MZ&X__(>?Y`MF4<668L$72Z4:XC7+-;/J,6G.8.-!A%A3W
M9O"-(:=.$&R&GT4O8M>]'FL^J3?A5"R@/)"$SM2BR.`C.3MQ%1=?DB0F;&9-
M/L1"BK0`A9V;;4D$P@/46#)03,5B64D.96II!&+QNP&!?BD7(S.6P>)*?+;;
MCI]WR!LB]DZ`(1S@5`0B(7P."@XP]6A2*6UPBG!0RHTA-W9\O$5\%R:FLRE5
M5(;Z^,A53+X_8DP4_$ZFYT:F;!3XS><%_;9E2FSK\"M2O(3:A.`YQ\_QX5P6
M]A;0Y<UZN8P3ML#.D9#^RQV<0JT%\X&G,9Q$]_S(1?F`BOT_V]FUS/:K;T>6
MWBO\IE([]?IS"EL4],G"?SHGG>%+G;X&*DXH=>I`/0EH#:?1XC%;'N7[_JY@
M<RM.G&-3-AX_&H`!1=GXO+<2L,_N6&?=,KMUQ4]7O(TB=+A\;T?:4S0VL"N-
MBYX4Y[I!QE@7%YB]"PS$_R'*#RKYD#"\P5`UKOH6?/=%#$W]D@%)-H_OPZSG
MN)-T45OR<R/Q$&9!2]*8?#KA8'%#4UB[7/&X?0XS(N#"ON1ZH2_7B:E>"!&C
M@E',Q)S/\SQD+;5H@:8"\S6+4FAZ.!BX?,H1L\\7TR`S=0SB-N=ZZAC[U8:@
ML[73M,;OBL3,W.2HSMZW&)<YZG@:J9+C^^0:UW#*T$>V99([/$JG))+!`^NY
M^"$`44=#8>!4W#P4>Z=FQD79P1+!S6N3`DN[$F-2DC0);ZGLO946;GG+))[%
MMVNC'PD"&#SA,G+1[7E[M!@_PJ$^[!P4OMY:[O'6JAGE>_HG-JWDSSV=8+#L
M$J0X9YJ&++DA=]//MS!H-Q9/<&&PCG1?1$!ON?&&PP:K.!G=AN?.2P2!@"MG
M.H7.OZ!5<3366B+\',]"N*8FXBDHF2;N$]BIS/*8A.G83I8;-GEJ\":.9SR`
M+H]))[K7>@AL^J>;V21[Q^OL@.X7$P(WV;+7=4]0F!$`B=<59_/MS7<,2SY#
M=DK"MRXN6NWN10\>Y(C&P+O+XX4YR3(^&`+I]-ZV&_#FO0/IM]!D&20,@[RK
MPW/S:#;O>IU.J]\>OD-@<$FJTQH,$%"]^VF//TB)MW1-!)YTR'BX0298@/=&
M)9YO(:VOD\.]I[P-,8ALQJH76O-"#[S00R_TR`L]]D)/O-!3'"J%HUKYOD+4
M66(0=990HLX22M190HDZ2RA19PDEZBRA1)U![#T5!C!16P`1504044\`$94$
M$%%#`!'5`Q!1MVR$>BJ8X1"US.!$53,X4=\,3E0Z@Q,US^!$]3,XT09<I6``
M76G\*--0G8%K[,\%&ONSJ;$A5U-90PI$%QQ^,M,NKKN-8;O7-5,'UV_ZO>MA
MV^9PU>^][=<OS<0WG5[CQV9]6#>3F2J_M/GR2(S]Z\;03.[6+UL08]%,E>KY
M]*R4>N9W<ZU&WJ"!'PH:^,%L8.[<:[8P3V)-H<]K/,UN")[8O+Z\_&2EO>WT
MWCC4_=;@NC.T$B\ZK1;KG;=$<M"H-YM]"MA&@.W+RU:S71_:]6$:O-_N#MH-
MITZL(^M=NUPJ.6`"U'OS0ZMA(\@^/<,-&+M/.8G>J3]!`C>K$'N0!^90F/F[
M3]Q2EJG]T4*\X.D(@=@@R!YG/3P@P!E;\T8$XR]0ZC+DAD+CES8R:(/ACL;,
M2A[P./P9%C?\MW=SO'CY"$M*YQW(/7F3>B>O'\X\3WX7SV9A$JWNK#QYR<SB
M]53TDBT+#1:O&59;;+A7L]5+UA=8@TCLFMEK$"H4Y7IP[F1.EN"0;[2='1=U
ME<N@$]]&X]&L9!4D=F$5)%ZI*DA<7H6#@]/-J]`/>?D9]7&MB%H,DFSUDS&[
M_[GV"U^I;!EL:_P5;O.%(9VM-N;DOIH**U?-EUAF02OJQ60'`"\F1PL>;X8O
MF9"![62BR;Q(JUIK/HNB1A2K1A6K]H1BU=QB\88\JAYNT)!,\-!6-`=W_D)5
MQ;Z:I0+2^\LLLD'85\^+-%R&>KV(5EP"CXXH9>KR(H;#D.'-X-49K!OOE`9#
MVL70;L]NESPG)`=-=R+MAJ0U16@R3%5+L752,A*2IN;2\.,-4VL[RMI)\>2D
MM*.3XJ$1@]GX+,"N6=BR%DR<3LG)U]U+&65[*0='&`@Q`'$NF?EG;ZXH(!@R
M;^K-X+(]&(`9=='N#X;!FW:WWO\4]*Y:_7JWN;>EL'B@=E@MB.CC.:#=_5#O
M0+CRWH^M+OL*6A^OF(TWX#:XG8=D&UST^N+WL-?/L3KU-ZU.4.^P-5GS4]!L
M73![72O"=;??:O3>=MM_;34#;?O$)/^I/7S'3/U@,+S42MGZ..S7)09CS``*
M(JK-:R:KHG%D!6`5Z_%`[79&%^U6A[5+;\C:YK+5!Y/21&#);UH(5V9F!W5F
M@T($^<M6=XA"V-*F>UV'E0S[Z%Q?=FWN')!CN1UB0?,\@D:GQWNC?M5CJY?>
MU;N67H1AT.KVKM^^"[)=*-XZ`[<W@4\KN*KW6T;V,K@^-%N]_U;CS6GK<@<-
M2PV8Y#1:S5:WT2(0A'@64KMX[;?=7A\*S:2NW6OJY86'4'&(:$@FT&QAI/>3
M:@`%"1CB=<N%ZX/)D'3%NMD;LO]IQ7Q_W1NV.'UK$#3;;]O#@5X)22;Y<C@"
M?@?O%1"P7F/(6HJ"]NO-]L=@<-5JJ+#]SC"7VX]%9<CP_!EF:+XRJY<6F*1A
M8-:Z#=$]AK(R])""L$'1J`\#)I<#]5Z!"_)`(#J5!KFLL]&!,5,`,MUBI(U*
M+@*6A"O%"P/:AK&68;J7@E[T6RT,!NHQ>--ZR\0?\'1(Z[+-5(ZN4KCF51K5
M;G[.B2GT2TP2F0J!.<$B!6S6H$(I@Q:L[]FP3,>@T,'5-1NKUX-@P,8U#14:
MV($/6<90*@)\Q7I#96N!>/NPT>'0\$HK$`)[XX'U/+"_>F`7'EC+!^MZ@&\]
ML(X'5O?`FA[8>Q\=DQXF]S3"E0<V],%\-1GZ<OSH@0U\,%]1!S[*-[[>>N.3
M#SZ(/?!W!$P-/6MBMZ!BWL)A3/4Z,%#'PDC4<F3CO]U!ACE_#^BBSB;R^@"&
MN&DFY5!L9E4P9DQU6L,A.8LU6PUF;`Z'7GA;/!]D6%[7S.@1-J23S/YO)S-,
MUE9V*M]C=E![(AW!ST"M+F*AZ':M!/7Z36:$5>V$6IZ0[5T'L%W=1`$]#_"G
M/KQ>!&"<%,IL0EG".U6C/+5^P?HH:'7TII,RT^UA51NP50!;0P!%\-.[5E^C
M8ZT3_-1S&^BRU[SN,%.U#T_;7^L4V68_5EEY/("!X%TIM`EX$$L,T.I=L`F7
MU:R%=>5U%P3%:AI6SXM.N\&MTT']0VN`@^J-1@L,QAS:;PVO^WPU!@\Q:6W=
M&>:@[/`#A>8'*5GW,?OX`ZN>S(\$B"45`@8CAYERW&36R'.)\4"5:C';5`(S
MXYZOR4A:"WI9)XO$>I>I3@8<_M0#/&3QHQO)RHB3QSY!>]BZ)/H*R#00RX)+
MDFE4J#SJS0]U6,W@T,S:T8'PE2U'L@+4V5"1PX:)69T?P!C`YO45*R$_+S'2
MN30WVX/Z6V9'6C!Y,LP6#=VW-HP+H4PW`#P1]*3P8<A'_-E^S@*,8\MPYJ/Y
M$@II+!$&G]C2V]T#X,/OJE,WUI%B5=!IF9,)K%,O6C\IP,"$7-:[GQ!0;IW"
M%`L&[O6;P5`K!R^;E2:JCJ?6^_WZ)TU7P&3):Z$-H_:'X,TG^>J=IE('P]:5
MFPJ:L/>!386=WD\&@#4B#H#F,2L`7:!56I_(+<M!]@Z?M^RTAL:5X]B&!92=
M/_)G)5EM(D:2=*?1$YMO.@V6;*5>]7[2Q^:;7J^#KM04@$QW5FKH&E$E6]BM
M][TK-%L%(-,M1OU6A^"406B`Q2L[!&4H%V@Z$WTV)BC0)3_U1&"@*-YT6GA>
M[0'(?I^"P7R#PIA^9+WK`>'EK%^^:6NC)P<P62%A3+891PRBSK*1!A&MKLRL
M*[X+VNA<-PW+IVT:HB+!&3.9RFFV+W7MR%47Z\EK:[]03PZTX:R4FH)A6@V!
M\1''3.Y@<,&@SLB_[@ZNKZYZ_:%N"$G8AWJ_#7UOM81)DC?>^^MVOT5`8?N7
M`/W49\U&P#Y\)$K(K;M^RS3E>6(FYE:B%'"#WISD>!JH\D:_?66SM90Q)+4N
MKX8VR]8'7:!XTB6;F=M7>BNV6$M]")3+A9G*3-NW3B*;FEA_--[9Z58%1*(]
M&4F^UF24H5J5%:5BZESO!IG8;;VU.1A-+0MK-/1E^V/+F774I,^,H1\ZQN*1
MR6[_4V9<#0P)XE8L-X-`)EINH=4I@Y0*"PJI>+WX&ZLT!*QT)R\!,28X"6EU
M^18YPNU-I][]T5I^=ELM3?%8Z:V/3*%T=8EBMM$;-H>Q`<$T#1A?#J@#<R0.
MZO8$$$K0J%\1I`Z4S>["$]8UBLULNBUFM^A[MTH%-8;7]8[0/BKM_36I$$";
M,5UN=V.^JC./@=AZ`+9RN>GF'B!I4,T#%X$Z!SX:+/?/S8#95KAC=M4O60,,
MC(,VN*?Q4[O9RB1TT#)V83"PKOHS!&6UFU,&"D;IN>GO:A,<CG+H@KE"I:,4
MYJRCI>K88I:RSI8&8#\P(6$K"V.#1,W2GVH_OJD;AW`-UNP][B^]CY[!UK8R
MYRU&H+RV&!#UPM-Q@Q1>`XA6C^#T!;,C6TS"F$`P6/$^M`G83_5^E_O$(3!F
M?E]WVO4^`6S6NT.03P1XP48%D5^KW6^BD$'K`]]F04`@1@,^BA"@UF@#F63X
M$CD>&0RQ+9ZWQXZUN?N<.AX_/,*!-'/AT1?/UO-%=PWQ=,Y]1=&P40\+#A>7
MI2J[ZOLB@B-_AZ?PK5)('7$GXQS)7+FO";QH$;H%=8K`;^'F10`JC\^+\(*4
M;:SY,>3IV=<P&8T__WQP7-FMU"K?5L"URF$KG5XX_C7<?D/OB-S.HGFT2E77
M'1-=AUT36<5+RB%"@,2;-M`<XBI?YE+#9)&G=-73\7D2GQ*MM(Y<+^II^?2F
MIYI.-U;VT!H-]N-\*R\8:Z0D8BTVYG?791%SGAF80YMLKN!S'`'.EE@X_%V[
MV83Y`H>VNEYBHF9V^:&.;94V@"1\5"MI;L"-2.,FE2T_/SY(D<1Y2*QA_#E<
M=*1+E.EK"N)_#1=*.PS_:I405Y7$0^5*H$YL1S8A:X@4&IKG!)5#/E_`G[S[
M)NY.@5Q$*5R/S"ZF\^N?,%`PQ+-]`C!:K^(Y/+1"P&\@T-(,8F[A\'"^GD'?
M*>\^'&O->B%)QS'$G"=0TA#BW^:8(8$G@H5\GJTGMR1*/)N-DB#^3,"G-:JV
M`)E%-\DH>:0PIJ$H`0%FC;$*%^(95:HS>&B::9S,";@(TT!1BRB5_*(N/.=`
M8$'`J&424^7D@:QE$`L")5Z$_`%/HKO@=8@5`5Q)+\7@)OZ50,G>BR#8C^XA
M,"$E3K<JV(H/+FX=^C'6\W#B0X'@8*,"!)_<`PKO,`]\%M]&9%/Z^^C^"T7'
M(U[[!4E$T&?%C\9D`3E.NDZ629328Q?D4,M%3E65;/(2BMZ#P#30^,X#3^,U
MA#?V((B+JSJ".9.(HEH3#C,+UR<GFU+=+M:;DA@:IR2)KK++D<RCC5M@O8B^
M;$IC")V<0N&U"#:2N,TX4W:H1!&3XY62%V[:+F.]MRP,B*O!'^CT8H%V2T9S
M##.W#82$P.]@WP^N^L$U/_C`#S[$QLU"*Y*17,63:WCR`9Y\R$T5U3V3$$*Y
M!!"R'V*+\,@2R>U8O76RRS[N=\ZWQ,5ZV4F5;7WY47F8J@B54QV3:[?][**^
MF5XETFM$^@&1?NBFLQK/HP7((Y)Y#D1*D`.18N1`I"PY,"\06W8<D\N.+<--
M7UO:9:L)<4W)<,CG70)N^#]7?U'WX_'5F>[FGRW2*@OIP6\E+Y/P/HK7J0L2
MB\&*B-BUGIL(?/556:>A32A&N5MR'B9NH1<^LUV)-6;VN5Y\7L0/"Y',"573
M:TWW.9K-'-%D'6&DF"2+\,$,$0'11_;,MM?Z6:/D`=R<82`&VAT$NF'MM8<V
MYL)A:(T(^8B7T12R[?(L><_-R-J)2%G&6'4HM$*Y=/PU+P@^Z)";9><$9LNC
M&5D4O.&IUO'0K5.[1@]NF2"R%W]*&J*+?;;P=Q_B6=XQ8K\%$L=[65P]X\_,
M+'%I'Y)QGL:W,"H/*X*9PU5L@$1.%?"28P4ORMS*B9!)F[$$C%UAY27CL9&2
MO'Q9SE9VQ`B2//B#\R:+B<Y#)*7^UC0SY,&8-BH%(KLOTLM$$=BL<$;N_F*K
M>086B[N[Z"9:\46)IOX`*IYZ<R8E`(GGC:;Y/J<M`!5$IA[&%A=K)K>+-AVM
M1C.52R5,$J8WQ"C6MF$5OMJI=?$-MB*H5F5;),(Z*F9T2011YPQ"]9GEPS+`
MNT57\W,(%7D;6O443]^9$X)(VQ'7JJA[B$7A9HY.[1T<'R6K+16G1H#<TP"H
MW\5%"^XL."%25&)V^<=*;_4&2-J%F];O]_I.:K_^DY,F+Q18J<*YVDE^5Q^\
M<Q*S4SHK73N^LB':U2(+Q/T"I`N0W2;ZA2*;(YPRM`<_NH7K7+LM=MGN(JGJ
MAH^5/.A@E5:W`[#BU[MO.V[-6N^OZQTW5U$KG$2X,R*B47<++S:H'5PX>'1[
MM_7F^BV:VR#?S<[Z/#_LM+GGAZ1.OOR&B-V2^=T1"P+^K?U!H]=WJ_O^NC40
MGJ9H4PMG!+Q-<1@4`"]%O]4)D%Z`9&2(0G+K/=(1;>XU@V"_=9FH,S"F*X8B
M1HI[EL-@*]C;%L<X@`E?Y]86-ZC=-+J%%7MVC5XEP2LCZG>PP[6Y8K.#H`<B
M.`/[?@<1!\/$(<%VS[6S&#M(@52215OG=IR,C$Q;@&6-X=[OCV"ZE;.Y=AC`
M%P@H`+T_+4[C\I62>9^ZHG56142UT>T',4MG%K`)5#,V!X_C&4(J'X*#A4U*
M<S"P'$;2WH&?W&C2@K/EI@CT]21*E[/18\#;T^CARDJ?XF<BNB6$H840J>J^
M=V9B&**B"$2<2-A.\FY`>&AY(/$2>Q=`P9\3$:<)*I:EC6*MVXS:P58Z;TQ1
M32V,?[:\`S01)#FOM6N":XAR`\W!-Q=R&?9")-EV(1^3X4IK_^S2?F5;1!?@
MV<@MH(>[:'Q7M)R1?^8*D/UG0SHEC/P?I,AWLE.WK3Z.DG2%H8=?^!)6=$R,
M<8P68];%F%3(WE0G,IF81`@7WM/>?(0L+-=@CFMHJ*RFL/$>BC&4HG7=J^@C
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M3'DMW)>,4I6WE!:Z:I=)E6F4913>4F@GUW!0S;(V)7(,;]\4Y"TR=I*3;`M6
MYQ<OQJQ/^$EE89V2,-U`>^!%>QY]2:,6:\IGY<Q#H>UF5HO3AOPIXKS]7KHI
MZ3(Q/OR=@,V8X0PWZQ[YYPILF?;1%IC_FLV3\<MBU3VA<9[6-O+UK<.7:IH7
M;YR,G0H:NGG3/*UE9C+"Y[]^RZA8I+]5RR@WRG_1X92Q4T$I7Z5=PK\;>E=,
MV;SN3U5VI:?16?A/R_KVGYCUZI_7X/^\K!?_O`9/U_!`W@M:%\\P`@@5(;8C
MG\-A-BK+X$D6GM^X0\QMS%;1K0+,5DCTW7\[$B[*QUTP9/B^>I59+R"3@Z:'
M$>5,K13XK`,NM]K,H]XDY_(OW>0VG2)0*2PJ@Q98^/E%P#JVJ`#9U87GYX_T
M"\BBD_TDNH\FV0T:8_2K)%L1J?12H\,E2_A!;$%!:FY!:D1!:D\K2(T7!%RE
MR+CN]G"+5)CFO&Q9Y&9WL$EL7EN"4\WE5'L:IP.7T\'3.!VZG`Z]G+ZIG-3(
MT.)$)C<\:KN;DXQ&+?+S=RI>&"*_N_#+;Y=9/%:^:B^;G;57J)Y4!J\RB(,_
M'B%'4,4T@=87=J;6&6"T6*?E>"Z3<!Q.X*%:G.\3ULX9CS4OQ[-8W$6W=_!&
M]G+3VG@;:^.-#K=@3ZM:00U=.4WYW;TBFV\L'Q+TL/`;(!H#JY5GH\=X;;V<
MR%_+#L!C1=/Q<INW>+_5II`;PLZ&[ZYW&IW:F^'8;KMGKYVP!*&"1?FBNF*Q
MG@>L4Z'F*3I]SQE6M,RO`M(3^(:6[$:3_`;3O%U@>J)_4KXEC0':'#@A'7#=
MNBSC!_FD/6,P$5VF%(C\=&N730-/V%O""J[X/6&CE12[!)4UL[K\)8CBVHI7
MO9]:6;>V@M]O55FS>G1M[2G^N7UK\7OIZA*UA7=V"JNJ/1KR`MVJ<_LM:UD@
MO?E;)\_O2XW74VKHK:(UK8JWL96-(IW)L.4X,T$I:MTJ<#EHYH&'AV86N"QR
M^\##0=K03ZL"M_8+21V;)N&OXYA"(!9VZQ!=_%"]J:-.PG$TMQ=/4VC#*%Z4
M81!^6<8+L'S05/!\WH@-6V??1L*80!N@9C5`[7]O`WQ3.3TB)WN[;?*H$O;2
M-1,KK*%6TO.<9&<O%I_'S5SGEN)EC2"XX31]-+2`O2?JT0;F3B%8KZ*U`V)E
MFC^F&,S#^7CY&*BW%"?@@2I^IG`M+K\N*]Y*WR<?''4]_%DS9&]&VI>D!`Q]
M;8PEB;L+PF&>0HG@SAM<4]ZU4ZQWT@"TI;^-9E##TZAI?A/`!(*3E`+RZ_-J
M/:2EB16/EL";#+G#;;"V"\1=VJ2#D^:`OZ7`BGX6QY_72_Z@JY`XOEJ":!C"
M)PX*`$#I%H200IU(4@!*N\R@U=TX=?<I@($/=&%Y]HR*ZO*O6!26RV'!)*ZZ
M3XFC>0N?/W^JM[FUW,Q?*M?@^<HS>Y-8@\)SJ96$OYEJT7!\(Y4_S2HN65@/
M*IH+5G7W).M_IZ2J+EF)86%PPV\:.+@;FCT./4B"OE/@YJUN5=(-JO4TI[7N
MFV+LH?4">8LS8YVUJX_(*HY.8W>I3L>K,A]]0:I1UL?2D9CJ4PEKG@IB;6X(
M:2";'&,@[\^;U)I@YHV4-8ZZR4_T+;)%(W\0E;='SIXS:O:0$4,SHX:0+72I
MG*M?M#(56QUI.I/G^O0<A6X[LXPD-M"I6\6C&_)6,0?1MXKK;^2-RA^[O9^T
M.XXR77^R/<-5[RW8N/QU'1&WVP*)R*5.<J<'MS*;3GJW-P20=KE4`AAR^\)!
MWU*W(D<WV:U(/,@EPY#7(D<WQLNC[%O^(RZ]4,$#!4X62-.']`%L/R)TH.S*
M*A)(1O9ET>7'8[2?G7D/*JQ/>U!/$2I&I;"B=$8WX:QRQ\R#/%E5H'(OJP'I
M9C5OF'7ZV0D=(P)[@.M`$D[I2XD9!GZS<1)[J068(`TA:`*L<B0]RB!'TKE(
M"<JN:AJ!;`PQ8;S3E1%\*I,+A0%F.-.@,HRI23U5]E+>SOH%)X&!17X`D!4U
MR>2L=+;!&+3)45EMDJ[B9'1+!4K-H*1.&0Q[_?I;-UB!EMZ03U8A$!F<WH4P
M"BW6L`;@T=]S7:%!E&(0929O3&<80C>(W^C"0Z+QOM=P.^R[&-]`#_!;T3>S
M[,G>(ZKA"R-2'&]`*&+H9<NT$P**5DZ$WQ/MP'^+T:(BO4JX'J96=9$(^\XA
MIHAH`!FJ'(%<=QNM_I"_185"(3C`L*?%9M#!6WA86J.PE2PA#TB[9;U:+Y?<
M`JV^6B7P/+=3^1$#R+I339^]K5P].B`1MO):`$LML#VC.[$[G*9K_G`]&(HI
M&G3"Z6:$`Z"J5>EZV%1@/3"*P\,-*/B[#(S(GN&\1.)!!*:M]LL73L1[8#2U
M6ED:I;<84?DZ*97&B$[WRQ(UKR\O/XF`\J5K)!4AHSDH3Y.]]`!1T$LWN7@B
M@9&<E!8A[:T)IJ/V2[>$>O.!D]5*MWJ_->`ODS$B.[H[321>W``56GI(`4DN
M%D=G9Z4)+^3X/;;=>'PT_&$CB'I>FD8\*83,)YGFK]E:%LC\>I+K-5/_\5-<
MO%?UP.J2@0A<G4\-9@%R*$P/@:W(<W"[^Z[]I@V/?]`XL,2`QS1HC,:[5N-'
MSH-$"?SMH2'FK=*`1#Z#\-G>-]F?XJH?G[.UU8-]:NZE"_^^CNXSN^X4!V(S
M/8>)B9[_++1=#@^(G/TAL6R=ZB,SK51[B'LI#9/G\)BD-)=2HA'TQ11/,2-O
MBB0GZJ;(L@*!I>-%ELH:K#+CIB,DB,,%&0;;2@*+'PW,(@HUFHC%A,@]_/N>
MSMTZ?C`W<`5]^"4<0\@\MKP3H6*M18?`(H*X"F`6B4&4X3X:KR(C\IM`$PY(
MP9BO'3F^Z,=**B^R"O(,?QXF<A-0U:VZ5]&^:F[M7"96#`+9&1E8?F_+-@N_
M+!.G>N*^*V\"HS04(O2AC0CG7AN,5A''FUJ&95!R&28>F7.785KZI6Y#:^G,
M*,"2Q8M[;KJ8E-ST-_!H$@:P%GD:1-]OTI+50D[46B[D"BH^2F[3]7P^2AZQ
MZN?0#]JJT@'R-PTI8+,U:#@-DH/A@6`:BC5F#L6:-(?"V[I#I_TTN-N*.=!L
MRWIR.Q#IU-)8X`$#OJO)9X&,M@U)Z-)7DFGH^*RAKUQM\R$?`OYYXX0<.@@=
M1%*@)D$)P^K#8\?PVL`OM,H<)5V.QAKB`#[QFIL#W)[[5#$+9LRCTE1F*`9[
MVO,06O/E"45H3I>\,?39DD=-,29+GN+,E;DR5Z'6V)0DM^#_D6W%YWI<4LI$
MT:B56Y7X5?!`CF.UWG**R7<GS7+"72:18IW+V^=U@H'DG^WS9;)06:3NG*7F
M$$Z33:4.C6A",8L9V8BCW4TS$I6?)-%]*%^-P#DHV.YT(4+[B80='S]M4G7X
M*5C&3R00_-#FR-M`I)@D?,)W[U/!C8D-%(4I]R<'&Y!F_BSHTT!^TCPNHOTV
MD$YG#C9+1V^!-#M#*8^"?KY5P6:`RBB5$/L45$O6W+$A5=AW_.6;\RUKA,E2
MX:7)Q)EOT(N#B+="T+*3B&G^K,(J$J$)#2,@VZ>7AK)ZLR)/8L:<>.G$@'&5
MHF+QB_(JS:*7$ZR]E5(D6OCWY6ARGJ/K[N\F1`O#/YH$=IQ'YTPB1\J.)(QL
M\W6!2M93C/P`4)RAAD7DF(7"=".XZ#!!<C/+G"&^&DL=JXD%-C^!"?7FPH1.
M`UF"9Y3).@+^52'`)NV"VS[G2/_&*[BKH7,S[1IX+8,'!%*56B8QEY^O,*$X
M:S$I[ES_:6K2JS<E#?%NA@X5#:JIRXI'O4M"")\%+Z;PUU)\I'O(N,+9%1=C
M3Q<'EPE(.<7$&DIN./-LID?^+.$V(IVKO%G_!4SP0"*LW.7C*(MXK^*^&8'K
MRN++9,^ZTZ(/%JY?/?59@(@C-1*RKR_#=<JDJ"7^->KMBCE9&W\[H'L%<I`:
MS.;Q2@:B56S<MH?LLDFES'A04Q%2?N#U@N.4ZW5TC.73QF9C"QU<=BVXWZ-_
M:&MSAUML[/V>;RIVN#GOGHF^F+1CS1400D]FRT(*2NXYB,.-8#J:1S-SO\&`
M7)R<X("WW6N"HM8@`&?[%."H\GUY]`_:7H\!N&QW<$!]0!7IPU^I2A"U>U-O
M7E--HO8I1.-?\#3BM61T6X%W67:X>KA_0")LY5G?AHO&L`UA]+>VK.1WS78?
M2[[L-=WD)LZDA2=?-.M#+/DM?VL>26T@R5?U-X,K++WU\:J+I5_TZRB?R_J/
M6&&N^GV<_Z`AWFBWTZ^QPK-4+-/!L(YA#UL=A#4TP$](H[_K#8;=2S>]C3?O
MCVV,>:?=_1%)Q0O8;XDW%^ST0:O1ZR(EY`YR2*8X]\&GRPY6F,&GP;"%U!,7
MKN'P$RNDFWY]61\@S*^[>`L(I>9ZE^2:4X;P-,<RHS0'\EMXB^"IH_C(=I'`
M1W&Z#,=L-.P)KE9ZHT<`VI?UMP2D.\0!G1Y!P0#5?1QT6?](0ZH$I-VE:-I=
MBD;J)0?0):LS:'=QP+!.`VHHI$&U?X-J_P;34SC@7;V/`ZCF;UQ>=3[BD%[W
M!X*&*E8/GG/!`%1K-0;O^W@#-ZE&:9)2V20[I4GV2I/NEB9W_<$`9`'(!F@V
MVY<X@.I)DH"2R";5PTUZ@#7)8=0D!TN3&BQ-<K`TK_H4#6AY"D(#B$:FA8GL
M?@;`F5']<M'IU?%,VI3$MLE1V:9ZN4UV<YMNYO9%&Q_)[2X3,P)"L"+[A;N<
M8>EO\<'2>8OGT"$&5Z=#X!/230LWDVTJG23`1?Z2$$5RJB$'#S5VR#[MMZ0-
M9`/(#J+&#3EL!MVW1!;4<*)&DS:8'`NC1_"J-QK\@@0*HL8-3`'$C,V=+_'Z
M"!C!L4W;&FW:I/B!IOJ!INK4^_BPKW>(DG?`HWO8HJP4*OT3:;L0%(-!K]&F
M,X*YD@;AD#>MP0]X.P`$'R8`P46,03Z1W#Z1W#X1W-K#0+C#XL#6`!?:-S_0
M(!+2($V:!FE1-$C[H$'.]PURZFS0,V2CU69K&8(A+.>#Z7HQ]H#3]4U"@)G2
M\U$#F*;N,?N4F+Q()=#H71/JM#%XU[X@0%?70;8J=(``\52"@\E*-&E]U:0'
M8],SW)KT>,L6\!@@8%1T+9OT6&W2@[5)C]8F/5R;]'AMT@,6;/+WA.U-+F2:
M]$JF27=,JW]!`AHXA+8-`31LTZ`?"%O_;7M(+#7(%7BS-PS`WKYN$$4A38HF
M+8JTM/D'1M,_,%H]>CRVK@9M_I0D!B/ZANR:EK^8K8)B?FP39?QXU>NV"%W#
M=RKI/`68S!.V+CW$`/72-OS$#0\U2#$NJQR$RRH#]7#3ZJ)S3:R*+[K7N!T$
M6Y^>\@.4+CYLF_J)?96'9U?;A-A=#%JM'PG(L.XK,0?3F<+>K8>:@TGJM_)%
M8A0TY!<G<%#C)\^\+.&>7(>M[@<*]+:-JPL&HLP6!KJBJ:XIT"4YFXDM;KJ&
M$D[6\-TUL:1MTPN3-J4GVZP?<-74?M/H$,S>4-J__6;0HK8'0*NL%]$7#_C^
MRPJ'M@@Y:C,1Z_9P$+WM03>&I\Z>2GMJ36^D>'92VLTN"2);@MYDH?,A>;VG
M:=[391N\(Z9,`2+$C-[2(4T)`%S5B14#O6!NDQLI]$JZ36Z9M*D]DS:]$=;M
M48`AOM?+?I[B`*KO^J1P#^K#(;[P]O2<I^-(!<<6KA]Q=C^0@_('<E#^0`_*
M'^A!^0,]*'\@!^4/]*#\@1Z4/Y"#\@=R4/Y`YT/R(@?E#_2@_('NVA\\??L#
M/2CIG:4?R.%%;SG]0`ZO'ZCA]0,YO'Z@AM</I$#"^3$]$W,H.0__2*U*.F_8
M.I\`M;L_TOEQ*)E?I]4-V`<NNIWN&W7.[(!Z>"<S@Z?=()9<;(%#;&O3"Z..
MW];L^&W-#JE.+NO#RVN\F$SBO$L=!J=JST`?B,I?-L158!*$J^3+5I\PS)B0
M^XO9[I+%;'?)8K*U=`<W?BX_D(JQVZKWJ9U`:OP0*NFJ3K32%6WY7_5;#:9<
MB(4,@PZH1O+M';RGII7WY*'L>WKOZSUY7ON>WA5[3Q[EOJ>/<M][MM+>TUMI
M[\E*T74BCX#?4[/A>VJ+]SVE30%`9$]O09'3VGMJ1?:>/EM[3\Y![\F9YCTU
MT[PG9YKWY/3XGA0=6G+($[#WY+;X>U+8:*$ACY3[]29AII#&)`!ZET'W^O)-
M"Q_H$F/0(LYL&)S0EK`/2%KWPEN+GF4DG)QF^JVK%B&(3/>\JU\19>H/F+:C
M#B+Z]*0(CG4X2P8A#D1;C6X3']_")XVNO823M1^T.@'[#$C3!1"@_7T8P\`[
MF=&-.'A'';8*GSI/O02<KA=9VDZKA2LQ.%W&=^Q]/3U@,U2=R(H<+'Z[R&\6
M#8B=2.%7Z.$JX#1?[G_HH^?P(GK:4B+U$-AYN`'%-[O)+2(.I7:(AFWB3'G(
M>F5P0>@H#KSJ#7!Q)6UMX8U)MYV$DVUW3:\/N$,GS5F`:<9=__I"PCWTI$GW
MH=5O7^!-_)$P]?Y*&65_I<R7OU(6![E^^RME(_R5FH?_2LZIRCO6OF!:X!T+
MI*9[[("ED/ZQ)3QD#ZIV##?<13::+WD3FRF\<<TDL9%FI8'Z-I-X6SI)8&F9
MB6('P$FK.FE\U>^DN7A@?YE)7:1XO$?-)&X%.4DU*ZWAME+#;27ANVHF\>UT
M,\EM)'G`:Z:)DUTKS<F2V^1FDEM+Z8MJI#7=*C61GF\BC=9$6JV)-9OP,S63
ML+HVD7R1F@E74S/);7($R16%IML)34Q2FXA4-A$);+H2V$0D4+J+FFEB)6"G
M84E.@V#]BO2-L-N--+?=Y/K*2&N[0M)&1+KMMGD;:?0VUB1B@]-,$DZ=5II#
MB+0;=^$T4][:$LC=-LT41TJYJZ:9XL@+)B[<,=-,<3H2T7V(D"&:#Q$[5^J0
M%A9>$482TG2NQ"$")QPJS217!%T)E`M':^+I.93*9=)*="5..AI:*M]N#.GT
MXZ39S2C=?.RT3PCM)X3VDT.;.=^9R<*!SE3-B!YN(/JP@6BZ!J+%&HCJ:&!Z
M0G=]0P#"PK,`N;L;`L`HE(N;F9JYHYG)FB,+`D#8"W\P)TGS!+-F(T0<FI@\
M-#&!:&(2T<1$HHG)1!.;T(4KEI/4L-,PW=Q$;+(F,M:;5+LVJ79U"X64J46Q
M;9%LN:^1.>=HCD0(`&&B.0^YZ01^@R)HH!3"J<=,X^X\9E+NR..F8VPUYQT$
M@%$(GQPK+=\)0``8%\T#!P$@%,KKQDH4_C9V8NYI@T%0[L*%QDYT59ERF[$3
MK[%$[K%C)EXB.L#PG,$@2(G;V`34=F<;Z0ACIHF39RN-GZQ8:?RLV3*7<H<7
M!,`W,LSTEM-M;3=%.KR8B9D[A&UTV29]F[L3F$E]I"VDJX"5R$^2W32GU9">
MT\Y9W72DU[1]##<=PY?'GY:-UW7,/FH$=J@1V$%JPP_K+'*Q`VS:=W)W#$FT
M>T$=V)G68,_FZ,C#%3;:D1[-]]2M9&TW'8,@#=+'JJKVK.W$?+<:@R#<Y1ZQ
M9<IJN\,8!.,C-G[--*1A*'F@Q,'8=\4@*(VVUXI!:!I,@N0&JI.&*9M\T]1,
MUG<P,0A2(GUK$@%@%%UJ&!L;D0;DHR/-:EONS'DFS+LMQRC-7;GV?%D8\[AJ
M!VK7,_%&*JGN^W8-G7@Z6:GRA[CD,T-J`[$"^XKJ/:<\>H9&*4)L$&3YVTD"
M=SV;1K,97.4/$QGK!@+E[D*DW"RT3V47_DN'I+*805;1M(B;/T90'B=HE\??
MEO%XD(#',KS<-%EI1;EEG\$D2L+Q2FL(UM45UO^B]0BB:.$ALVMLO7@&?UGD
M'(62!J/Q:CV:J6A,;I\@)%KT(31D%1V"J$P$)QFKH;++NGW/W)^N[$*ARC*!
MEMD538-4`AZJGXR2B59MR!7)5)=I^R$WSDV]GD6TH/,F&B?B42-UR3;*X">+
MX&EL>`UR)*)F(\+@H39&`%K/MNI@'D->JZD(-.^,837*^3\B>!+^.D-A6-E3
M_!6#,H%E;57K)=5C\9Z1X3<+H[^?X0]XE(G->;9)X'TM-J?].)N7SGBYRWZ(
MR7B'P7U>QPVA*P-XYBDBCJ$,?:I#53!<&7Y9IFI/UE1&XN$:`R*D+14OWV1#
MF>GD/!2BU-F3:)X:"?`:UF*5VD@0#=9,Y('=9'Q)/5T$NC<PQ^,DA/&5)QNQ
MQ`0\M/)<S^>/,NZCG@ZMDT?<EXDB9%G@I*=@?`0P+>G)\'C3FWBUBN<\NGYP
MPW\71/I74>#YVPD*4P6^AW]XB&@)8+0#P<5\DDW%4YN.`E&_Y2AAK6UGS4N=
MA.EZMK*;S'K)7#[M9I!K;U94Q*1J"D(VJ0@@?\U8>PMW]"5@14H>`_XNW%8&
M@+?0`!"%_)FD7*PT90LJ^-R$9`H1%*4%DTI6T\#H.PIFFGI((8M"&@?1BC_E
MEZ<EX3).5A":5$OD\5#CF9F819?57G85$"5H*L"I#&>8BO?SS"=^K3E">V$E
MU9_K=(:M;FOHSY"4"48X'SW>A-*"X$;)5'\707*;A&-FD80!?ZQA,EJ-UNKY
M`RLB8?DX@JZ1X(05])5$>S?BV478-&\85XMX!2/+;882M&)(;DZW>6ZLC60H
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MW[EN3NO0>3Q9SV+CT>2!L-MM&SU[:39[FP"+B`V_`H&@8[AON=OM(EZ`EXT#
MH/*OAN4O%>N-:0F6\3B8!&@S9$9826=[%8ZG37E"+.;RR;'\82_*.C!H]"$G
M\UW/E\8382Y*R)I)/"E&#E^)""^<E<*TYD-M@&4HZHEEHSE<3F(=X:HG`14*
MQ:C?GCD`]A#!H;?N'!%"6M11=V3#.NHNQX1W8ZT8L)ZWI(TW5*IG)P2A_),R
MRHQLF&-@ZN&C(%C$D_#<@(I!"),TK&A+8OT:)G$Q5KSPL(+?/+>?^7'!12_?
MA/\E2U([D;_H[X/GRWK)2LXLB_5L9CPD;F]O`NXRAM(EG',A\@S><U>H"E>^
M5PSP:4THGS&K9+!9/?2F`#;EVA\P1Y,)LZS2$IA)",'@"]$F\9H90B61V;]+
M9@B69EL>'QZ#9JU0"O,V&I<J[70V*A)\CK9:S,)%>42_^&N(WA&@Y_Q0P&^Y
M8J(1;U30<FV9,[;P^9^.S:Q,_E@K'[@@\17XSY[@"(3R)Y`S[6:0!E-F_U/0
MV@:,J]KOFKXZX(R6(S8N1I/[*`W%[AD?[?H\Q5,U+9V33>("$J/(Z3/*K#,Z
M>"H?9_K*0`=V%D\NJSM%DIG``S^PP6L\_BEY[3*1O5W=(112^/BZZ>GDFQ$R
MQ3'CAX^<1)U+1E\DD7C>A/\$@]0FAI*.%BOQ[I7,LR$3KWGB[GB]F;V!VQRJ
M>]0LB17$K;F%!;LXP30*&52,/D:V8HI`,H?U"(<B3_60I<VD1E\%\B+-XA1,
MHO%LS41L^Z+=:;%E,,/2)LR)F"HE4A`OQ7F?R%>>UQDU`+L4II!T-5^YBT^%
MX7EQEZ,4O,HK<)8CL('#52#RDJTZ":45S@\RXG4R#ITR%O0")`5BQ[HD6O!0
MB)@\R"X5`[@`VX>LM\*46;3I'6_Q2-M?05!`M"13^"DE"@SBO7S=M(J7K$7O
MPQG.0[W4D^6CEYLM&9F<W#/M&TZ":,+^C9BL)N81_7*T@EEMK_+==]_M,)$-
M^&Y_=+-F)G=0V=X.@FF<S$<K^`A8?DP4IT&P5V%JKK:S@Q^"\\S!.<%T"LDU
M10&9<7IN4.E-0.PT9J`:VBA\:6G(&Z1@2)ANQ'#EQB$8NF+C<'13X5\6XGST
MF2FB<+Z\'UE]`"=T<'"4/.I3BD?;38G'YMA_Q"-3H3B*2NTBQ)-H^JCLB/!!
MF[IF=TII)W>IU9S\$2>N1YDL,&%,U%BP-<F4B[RM"2UNBYC)X:/H(WGBZ+R^
M3>+G3WDBRV8-FPDJ/!$F#!(=?PI'#5*S"HIX&2YRI6LYKN0G"[/\6YX7C.WJ
ML]D`-J*\,ZMM<2F:$!YG140Y@X,2LN9H3<'ZJ+R*CJ3:E,A380P]"5?K9%&H
M^?WV#8Y<A%8RZTSJ-6DW1@4;@BMW:C58<!1'T1N[8C;7QSE_N,S=!3:/+12N
M/7F;-#B)/9F7H)F%HV3A/D3G%#T[A##QC&T+I@*5ND3:;)6L5W<!]P>0C8;T
MC8;$ISBP14E<6)$5=?;#732^TY8OLM.RTY%J]1CUMBQRIZR>E"?3GWVK5D_+
M$K*FS*G.2E/E'E;5VGY9*M._JEK#75"+-]]JM;*$YA%%M79`$]K/@0O8EEAI
M!*+OL_5'P).-<P>1%6R8S\(TY8H/?EB[\._BV2Q,HM4=6]W(7X1O2[4BMZ2J
MSD:_Q*@IC!J%<:`P#BB,0X5QR.7T!)53D[(C=G^J%;D-Y)9/8M04AEL^B7&@
M,-SR28Q#A7$H#I)163,I^R$4#K;3W)(!K,9A-7$L>UC,KR%VT*H5N97F<I48
M-84A>!^B8W`+M\"JW.(1/SGU"3HXY!D((93"%TU$6<!%:K=8IG:+A6JW6*IV
M=;$Z*--MF5CM%LO5;K%@[19+UJXN6@=E1$&(UJY/MG8SX3HH)0!*N':+I6M7
M%Z\#.T"'5[RNF:D`>1@R=F`[<!HRIIVR@I#IJHY]]Y:5>(DY58K"<P&52Q#U
M6K9Z/EM;F?Q#^YT=M,[":?:2M0%(HML[=4JK@5BK=&/^M+IV@BG^OF:_%QSC
M?,.BW(7Y,^@&@)DIT2SS_[,SBYB1LF%6:@^KDGMI6EG&K/H.@'BRW2S.^"EU
M5P6J@TX17JY$[L@SZIN5CS%_G?+=,#.8_3]]8K'&XPV+91WY6U#"1=3!0%Q%
M'1S*953]V3ZA:`59.8T*YKL/3K+R/`(8C#&=U1KQRS"F)4MU9*)NN&CH`.X!
MHDZZ#+<,C?9VE/FD:C"QD6HZ)#!&&9VF(J1_ZWINN.LZ^\E4]<!7"99HX\]V
M!<&520"T*EI>3I@W`R.M,X/P4?YFTSG[".)E\'-^;$D7HN(F<?YR]]?HD;'T
M1]!;=%S=LQMY7!.>5=F6@\&$K4#G(SZ!NKST?0J;"`[O4(HM6PPLVD7X$.0S
M&.I'69X<EG^<A6.(,8#PA;+C3\GIL4PV:E:WJPG&P49^Q8[@1]#FBQ$_$=N@
M)'9U50%%9<LUO;)#_E4J5<,K5<M[\!A?SI3((EN=/4G,,FJKA/GJ3[9["5[*
M8G]2012Q58YL/;!!]ZMEP7/*8?=8MNC8O!P'SRG'`5Z.@R>4X_`YY3C$RW&8
M2?`QL7(JG\4-'U?/*>1=^.4YY/%XA?E$E^&@%H+**9GOVY7+7)%:#9PM,C?H
M:+76?'HI;+'/UK&;E^+@Z:6PA3Y;*F]>BL.GE\(6^6PUGHG\P9.5-E^7FZ(F
MA7#/-J,SA`FSLYEM9CK83\$68,:?F<J69O&"V=OX7(=A<I]UG$DPB6ZC55JN
M[7C%K(83>Q$;]!W?F/C?VCKV$!.;,9E,G:(;OV68JWW<X&;^)"V8T]\_C_[N
MRS,+</?EN27X];DE^/69)8B?68#XF?G?6VN=PJ-VVORUC@N$I!:6A2]Z\<63
MHP3$\M7B(;:(6<XV$VT?Q:C0%/&D4HF&N]34V@\2EQ2T\TFW&)^CF;-VU,N!
M9E[8VF4*!YM53GN+K-&2*D?YS4NS47GHII('W^),L;*[.UJN$GEO87=WS#^`
M1["J['(_CJT\\]*-.\*Z=O29K"3>X_8N@O+*DY\E6LPIV!@KV/BS7[A$BT%]
M_V7:K%R#B0R%JUO@#LA7;;.U5R]0X[&\.L"%0Q5B1UW]TTM(.&IE(/?R708R
M+K_<B(@''>Z3JM"XJY9P4\V]M#)\A05S@-@-+FH=ON.,T_--[B)Z6DGIO,2&
M?O``&PQP+.!.")G+#8!1'G!&D549SCDR$GZV@=*(G>'<38U$BNV;[2CF@IEZ
MJ@APGH0BB4UJ]S)L882=`@\X)$:2E;-5NJQ]X'P*)5@]Q"1!]L$/L7:<>#K`
M(U[JMU3S1M'EFN_N+N,E*O0"N$[OL$NU4V>KDWO]25*N".>C+YE(W'##^=`Z
M9(38"<4N(8<'I:G,\#>'AS3A$<XT:P#X#F["VRAW\I7^EME.-$?AKG)Z?`QQ
MB1VYN&YP9I;7G9)#S=70Y"W]CJ;6?HX*4Y(L<SG@J,5K)>&DQ(.3\`XY.$):
M88PV+=-%JEWM);6/*H\#=W!2FDI>?^-4IZ6IX*PS(SM"8>[[$=!"%Q>MUL>K
MOE"$7U8=B#N*I-<'(D@X`FKW.NT!3G55[]<O6T-X+06!#J[?]'O7PW:WU6]=
MH!CPC`">)XY?[[>'[PA8LT<D__2N#1'?$=A%KW]9)]KC;6^(,VS0D'=U>'2[
MU1?!P!&,UOOK]H=ZI]5MX/#!L'>%`OJMX74?[Y[!Q76WT20:N-UM=*Z;>&8_
MO6/]@K-L=5J-8:,^P,$DH-F^)$5%PAJ]R\L>7A'P%69B"*%2"6B[B_,&6//"
M!^7AA@D8#_9,P$0H8)K0"V]>>,$_MCZ1L-;'(70K";_NMNG*`C!HX@(!<"'V
MW<M.`09=<3;HR8Z6+5._?-/F+^UX"BEQ"(P/'YFT$+);[W1Z#1X/'A.UEA?\
MKE6_@FBM*!">,1M^NL(IVZS,_'%-!-:][G3X@T>D!B5ZA#]_$1#JXH,'"LJS
M?7G5['EP!!P"P_K!S0L/0F/8[Q05@<PB0Z&YL+["`4R97L/3#V\#0I`R!)ZX
MA^+PUNGU=5XEL#P,E<+U-+M"*<C409.Y%F5:6!L*F^;/9O)6UP.2H[H`@VL>
M%&5+AM8%6Z4ADM0*UAM?U_9?5G90D:/U06DRV]/ZD*+<RE_H$F;GN]%B,@-#
M=U=5C+&Z&8T_[YA+.FU)PZ^3;+`):MO96]KFI6I.UL2SV6B9PH59Z:&OY^;P
MH*AY:)<GTJZ7LW7Z5-IYM'@R\2)^:G5'D\D3*=/U37[W8G/R.5O?1$L9Q'5S
M\DET'TW"I_9Q_!#:%Y#+TC+I&H]6X4)%,-F<P^RI339[:H[AWY\J5T_-\?:I
M=;Q]:HZCQ5,%.7ZJ*'QY,F7X]_LG]\B32;6-L<V)11C'Z5,[!_8KGT[.5$VZ
MVKCDYBP@ML=-,KEESC=+?$?:Z4KBE#[<(B<WB=L?+3Y7DL_:%JYUM?97+PO-
M?E`1`L@6,.^B;=8,6-XW^AU[K)$*.6Q4^E4,@OM2Y=>]KGV5T#;S>&G<TP'-
M\E%(R5WJ[*/N$14N"BZA&U*5L;*HJ)QGOT'.1GOXXA0*!+@%.8[G-]%"1:77
MA\WN`ALXNPO?T*D@AU8SC,UL4RX)QB4IYF+%[#PX*[V1*>*29[O8^Z4)33O]
ML%J:,%U11!R"K#]&V?K#WM07O#;;TB=IS*N:]H9^3F9OYXMBY\';0&-,HV0>
MNA?;X2YW/,V2\P"E*^X6/YJ(F]-"R8S8!),DB_7<9"`1X3Y^,%XG"7='RN*.
MC";MQ23\4HEHHDD<9=-OAF[$O<.&-S"!RPWN\9B6#14$=T4&P%V1P6]79.#;
ME1WT5F_'*)71S^]'LVA"H42+N^@F6H4X0AJ&"U%;?F<<*T%ZMUY-XH>%$:0P
MCZV[VO2.NJ+P7U'7"N`-\[KRAWA=^<.[KORA75=H6%?BQ(W2`<;9&78^AA-J
MKS^@)VZ2RO:>E[!LPT"[B\)/O]0</QZ-[\*`'VM">D,D-WCJ.4D=S9>3.*=J
M\T^U.>#/RKI_4Y'0+/"]:^9I84LU!$_44BI@BD$OS$#V'^3*D%9'O;AY52OQ
M.KMV)>O!4]SG'.:/9IH4;=!']Z/$*K)U!!F!W8]$A[70IDPPM3M**=PQ&UOE
M5962UX^^KVQ+1YN=?2;).8DT`SDN][<@4,VCU"3DZHF$BI<-Q-EMH&>7:P-1
M.A&;DBZ>\R25.$A6*8&-J\<<XJ@JWI!9BBS4JFPC'JG&8>9FK#!O5L4Y*]S/
M)J[A1&+C\H-^%UO<A;21(3A46LR;KP<EXR)<9DZ&8^BY8E0V:=^$27'VPK6H
M1!-P42`:P/&*$"2;((,SAU:]\D1D16D2I,Z.KLT)#&V9T<B;@0@*O'["1LQ^
M"=0U6]`+U%Q/F&-U-+D?+=B"+IOD<-6@V/ZK+?&M94;Q4G_'[<?LOE4V"IA=
ME5_.LD/+%`TA()8"D+?6^B8=)]%RE3[I*AY_`0G)&I=`7@*QC2-<;@JK4,P'
MS#QS3XARCL$XSN5K>2AL]"4O$>+4$^A>/6[0;YQT&2\=B381UNF=@X&X"^65
M%BY!YDHT<_RI'N&+0VY1;F73ENO_M`6VQO:V-0,;T^%.Y;]E0?<K?X88?FG*
M1N+V[QT:.`_^_1Y:CCU6PD.(Z)>9-=EDKXR5@BDY1[!F=Z%>=#`W#>SD7,\P
M9E^AR8[Q%;Q8I61MYCB$J8SM34G>DB9*Y7^^IVT2?KP;3;7&5S7_G=7\?_A#
MY7<F^0X7?A5AP,KT^TI57<&?:@M>5O/]O<KVQ47K3;T9P!EU,.SU+EH_[>Q5
M9&(*\?>BU>.>D;_%#-:W@M7V:N?;O_"@=:PS%^&.F306S\)8!1$.C-M.I1D9
M?^/-%;W?_]>W?_D]$SR:B/T#V?*M12=+$<R2]SJD?A7M_G`7R0,6W4BU&EZW
MPN6(WCE7O6:*,4:INF=[V^H\8CR96/1`.JL9E:0M9UE?$!`(2@=B\94_7E-&
M5Z`>C5S&M>6R'&#<(U1*=*9E@]'M;<*OI`0\`,SV'Q`C=J_BI#)SU3]'.13"
M#@7I2T$.\N4;^2*#ZAB.GRWG3/UDF,2\:3DV=[NN_(DTABM<4#74_T.@@JCO
M>W2K?*$`F%2`GY\1*2ZUVH%\G4EJ&UDX7F$@96-_,.SUZV]Y&S3>P&O*.[+=
MF.;)*B,>>K(EW13U5&LG@9\)*AR?W0@P@VIO$>Z<5VXLKI`""3<,<_T=^*)_
M)]S.=[+^=.;HU&>D;?,_C1VXM._P3W%0]IUZQXH57#3NCJDP\@Z1SX1L_T'4
M4[[2LK-G%VE/6`=\Q!WAVS;65+.Q?S!B#*@1BB_OS[=R0?@=PU(!-])`ZW!1
M#$RC*8'@&*SN\5))T)M.,XB7C5YWV.IKN**T^16U++Y'SF/]G;BO\!TW#65&
MH@B..@MG:2B$V%?&$@6M=S\5YR0E.]/B:)[$^,UPO391[:2:J_+MXH:EE86X
M("#[#J/UE*%FB+J4#B9LP*5J3H+HXN[;JM%BA0M!J0PB_EF)*O\%DGU>^>,?
M(U.9E+&-MHP>_QUF(:A0J#FN'IDIF\R0!\0,1N<HD?W2#$D"E:E6_N=_*G+4
MG>T'AKRZ/+,W:2R>%E.LRD*[.KK:SD^<2XF-?D'B95=JY:B6)!HNQE+9.B`#
M6CM]U;K^=_8Z2.H\D4->&6G<[)/VSH$=7E5I7WW5E2EA;9V@="DHW(7RWENQ
M>8@9\^-UDH9_SN8&W\IE"S<9O_>8C)0"7X0/]Z-9UKHZ4[7/2G1YWB19N"_!
MC)?69,+&C-@L9ATE%$K&YH\5!S7?,M[2RX4P59B5O[!.UX7IOU59_N*PYUO-
M.NZ?%>Y_X;@Z8S;<MK>QDEC58[S,`L$?M"1=!:"P2<2<\[3<V!^,UJQN8%J1
M&LLP^>WL[&,!DRI;QBB`&G*9_A;Y;9"A<>`@_@H;H9+5=0<IRVV\BBOZ0#-,
M,1B*AM3R@EFV';;30%*H.XW92!59($/)&D;I0[0:WT&O`X68N/61/!XQ@R6;
MB0>?+ME,_&=KZ:9K#<G%MDKMU9ZR_SD-HEV5"8MMY.2?6;-3:^O,$O[V+^(-
MQ*P@IN*1A:%F&TMX7WEUJ/ZH56(IXFVG=INL*[U<K-6FUC#$JA/AP1>61A%\
MZ]&\.#2SEUFE.MR?N&8].*N::L&85S`;#PP\C[DC)@*7+GNULY"XM+2+/S$5
M(*V-EM08+.`AA%^M1,0EW^RLZEVMJ:F\$4W*_`C3E#*M3:?Q=QF6HX.R<TT?
MN4(R%`>)#6?C.T+@G'5^?HBHU]6:M(SVX<<>()9X^41(`WF)WA@EG*C<,D^A
M>E=YA]4S<ZSS/1C(^!D+/3%J-UCG'=;VW5*H8D#S[VB=+1F;[R6V&?^WWL(!
M&^M='A%M`10\S\K+V5-VK@^\A<]$3<]!)<H,JD5E-QX'\A7=8@P7FJX[0T\%
M#JP*H'*M5<K:%N&FBCP0W/&,ZNR`6;/3]/-W$UN>+*NC$AVD#A`14%9:3)4@
MO9O=$<Y']7_3*D,(]I^-,PP-3V5N%F:W1&6-\W>;`X;L:1WMC%T'WR3A2,4/
M-DV_>K]?_]1O7?B,/\W\$_'(O^.Q)/YC#_[''OR_W!X\/'H->_`W->DH;TFW
MQ_]CTOT;F'0GI_\*)MT)8EC^NYATI_O_YB;=:>VW-^D<HZB4!9=Q,CS#7'-#
M!)_:Q$$,&X7<5<PU4?YC-&YL-`ZNWPR&_3\KT<B5H7!'RNY9^HU'Y^Q3FJ+&
M$Q["+WX6+\QM2$,P-!G=WA;(Y51JANO5J4?[1\:`PDWDK-+_C9235YF?$)2U
MH]W<7M:4?HHQO:$YC;PT\QN9U,\TJE_*K-[,L'ZV:5W.N/YW,J^/[`VJKUN&
M*#[)Q'Z:D?T,,UL8VD<'^)4E5`((4QLUMO6GD9YK<#_7Y'Z"T5UD=EN&-_'B
MV1.,[]<POX\.C^U!_4\QP(\.3[!R_)N8X$>'ISMN7_U;&>%'1_8JXL7,<&R\
MZY:@9HA469UI4])KK&/FNL:9LMQ]6X6F,>\QT5FI]S$+R)T.$6/;K<!33>U"
M^YFRH(W&L:Z;2`/5=OC$66(&OGOW9-ME*IU2S4SVL.+N;3D3'?)G--I.Y5NT
MXG_,E;:24'H)P</0J4WG?^BU!W5NW`G5TOE]`2>5-8.3!@XQ;B($CRZUCI`%
MX,A`A3AQ9(AS!$LY;B@T<;/_I;C!U8^7X@4-13-SQ%)>#\*&F>/FHTDM]VNA
M::2GCDV`]I6,8ZTM^;9YX:47SV\QMZG<GCB]G9[M%%;@-6<WM/B;3G!G57Q1
M;+I5*<F2=?.L<\4$#\/DMS)0>%Y/[,*S([<+S<*_JGGB%GWC[CNQ*D!TH.X7
M9TQ!VBU061RG09B:^HWZ$G)Z6D\>[U?]!7_-?G2*O6$O'N\?>`<A]SNU;0>M
MXR#_<W-)+:8#<BGL2$GF=UI^R2;T'2/\K;0U9/5$Z:C:_AU8\5]55SN%WU1&
MJK:'A[\7*5GA!3&7E*Z7M\'J>]>;^!_6=^%%T+^V^KVRUT`-IMY82?LX#741
MU-&(FUP(18GQBZ%.8:PKHE@7.F[3-H)[*;GJ(IM7%?*_KUOZ;W.3A^YYVXO>
M/"`I\N2'OQ+N]KR=-V):PB_?V5LJUX0%0MRZO!I^VDR*-Y7@?QGI]4NN5VHQ
M(50"Z''`1Q:7]>XGVY_)TX=YOCQA(JZT*`;;V[^'8&SQ\O<EHP_\/Q+___E]
M8>B!XR.MX^5:6=1VR[XK='Q"W(TVHI)DEX6>&94D:[O2L4EP<NQY+3T:"4Y%
MQ"?1;SUIH;(J/,I+I'[,1U^T*Q9F8!E^XP^]Z&>W6WXW4+O_Q]7>#9_9</R?
MHU^^TTZ)LMK!T<'G`KK\5,@@2W_UDYG'0$"1?/93\$WX'5/V:6PS)EGV)0P%
M,\2M$C%#K`S!@1@V(`5XSQM_Z:][V.L%;I@#Y#;G7ZCJ0WP@]RHGC6O9,/#.
MU/>50]0A2,`\K/[KO[13&\@6*/Y26%"]L/#'X=IBS!#PG8H(S"G?L>;O:C&1
M_8-,3>)X%7PG/S@0'K!G9'N7_)$.+GX_#H*]W[.6A]86N?U^#XJZR\]8('[E
M+D^UC,J"AOR=8PS:IN`\G(^7CY5M3K1'M(OG24<J9ZS<5LZB0>!5S^<T&E'B
M#8MFE$TWOW`^3!*D4BO5&-\K]6CR-R19J@1#P\HI*2)%',;='_]XKE\Z]>@2
M*+7.OHPV930W*S]RID(9[N<"7'E@F/[J1P-ER=`2L8GM-@U,S2?$TV%4."UY
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M_X=75SV]_HL7^G]>O=`?7Z'4_^^KE[KU_L,KE'H3>7]2L;NO4^[7+C9_A._9
MMN4WE3/BW61LH[)(M=O[BS`G"9K?*2(GUH^]JRW"1)8/RUER#YO:-!:]G+M<
MZ?NB:@D$*["S8R*,'1Z1V%QY>2(2JUF>NZ5Y`]@))I4\M"N*]1!-5G=JZYE"
MXDL6'\(L?KB)UXN)#^>.2:V+I`(RJRCY=HVU-%9E[8MEJ7T!<[7=*A?(O-KB
M]D<LAH0,9)JWIC<4Z1__J-X?@+_M;6CQDFM8A>I=PYZ=Z@>Y6:&X]987D?"E
M8CEP1"X&A(>4\`!1G'XK%Y8LOZ<=;Y^=:N[*1`U>U8\%+[_-W5-^S<U9N:E0
M>C;/S.@TUJF(:_:;WG6W.2CAF@WD""5=Y#--0[)AI00+\7`3.##8,"1KC0':
MG+,C7#>4TBAUHY6+`J/XC<08<GJB`)\AUUV-DK^F^#KEWM`UX^S,NMZB=1(E
MQ9`G<N&<UQM$Y3?J,I[5T_JLNB^\EJB"OV:/N<7>L,M8X0]WC+%9U&$\2V.8
MRGBM_Y5U]PY?V8O4O^1,B<@4X'+-I]UTE?Q<W?_%.#-(EPG+&\*D"@16C_\S
M8>7FAWZZJ"EMJ1L3ZJ_`G0%N?S;Z[:OA)BX-'@>%UXJSCF0K6P5#03P6OCKV
M0DH:#*9;-;=)7),A"^<GL*31^,?OI6&XJX3@VUPTSC7!*;"EX$\R^EX3S9Q9
M[J'_59P4B&*6M[(*GU+8KRFWTOBS7*D)'QOX$-5E0E/EM=K>CC]3N<6?/7D<
MJ*LU:F$ES%G^=,+^H3^D*NY=8"X(/`^$>-<`*@`J7UC!P8HG3N.^/*O)5W^_
MB9LL/VAYHM96SV2XA7Y5%UFGR!MK["/EJWWO=X85+\#(#A3!3JOF*D4P*/N(
M1;_>?=MZM<7R/__%BA+.5?J"'1KO6^7.5-T_)78V-A^H[@L\E!,1O+;CV3^F
MJ$9?7F[@@RO%M](3Y-]J^)_]:PY_>G'(BOR4@2]'_C;1V3L@1&J^E68;,]H\
MZ$QZ_J-%7DF+5&O^C3_DX9B"5[.(AV349_!P%RW4[IQ\7<;=8!.6#@8140_4
MO4[%)UHUF'VVJC"=L]9WYAKR>8HZW$T5UV^UK$?CL7QY,U=<\?)QNEXP];F`
M=-%MRU52-;YJ\,6O<JZRQT"GKD^GEJSY<*+(T>TBP`D`\MEL"O%F(V^)O`$J
M-_FGT6+2FS!O4K'+R/NAHMYMX-:Q+S"V<%^IN(_`<(U6=JNQ>)^Q6CU2&XWB
M2E@6'Z+TTV4RDH9XN2$5E$5Y'N2ZF6>IA0_>--^,M'3FRCM('G+G;^F(URVH
M+2D>3R-'SHOL4.CJ5CR6@SV;8B"A6(U>]T.K/[3>YMA6Z,4!BN!Q%DNJI`#)
MV@K'":WDYQDX;]<BG)#+J5KD2)7#J>;V`T9<[A4"TLPY<6J\M#37!-.W+5\P
M-TFOETVF)^NA-HC3(UYE6R\^+^*'!7^P+8#CMFV74)NM9,W*S5(F\F:SD^KI
M;"*ZD;U\@UAM@/;9@6MA4HQG.>PK_M*WO"CDV'\KD<TRD.$J_FP=++EQEH2>
MWJO\0:AE]H.KX3W"@S__^[R28LKQGQ8EJ`2I1\V<21UGSJ"Z0ZK1FKL"T1L2
M*3NT4VI3[E"`OY@<(C)%-#S-RQE:M`*6XTO;UK&9BL@4?_F^<G*T6]VO'7JV
M`6]8/Z[G/Q]2NX!_D`C[O\!&X`QV`K=G\>)VQZF)B.Q0;A=PV.L%;]IO@W:W
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MHL>!2^0AI5`PEZ'M9*;T1%4[T`Z(U-#""LMA69,)PV"APAN9R[D=;4X7]V0"
MZ8:4>^3?;.:.CP[V)5N"CT`Y_P'6C,PZ@,4B^P>JOE?)1^#FRH!4"&*"]3+8
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ML%FXN%W=Z5!QVB-]XMW1PT;M"O8]8`_3*#_K&ODL\Q\$4T.`N+<L3T;"5&D7
M)63#1+_"#CJ?Y)`B\@HS!'N&0U"E9XD=F>@?5I_BLY]1`ZT-GC8'JC]C+F2%
M=Z=`O?"_$^<)<&PBJNV;#-T8ZG9%X4^=4"!AJ5YEZK18/VT*=<KW\E.IE84G
M%MA76WR>/L7JF6XZU3)QL`JG%\S4+G_\'AD=.<S1(3`4>#7XMO?N#D^`.^F6
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MK]LL_Q9>C%A/T._EL'EM3KW^SK!O9_$-]V+E]C^@>MGLR=&M#U9ZK"H)*`BS
MQ]KTVVIN)6GW+_6X@/K\+K6.C`:HY9LOG?.C34,:%#A[E@@6+#K",Y[OJU2T
M!TU,+Q)Q=&IDA`<E%##C0J5]'U6UX/^"!MEQ%"XN3?\<G>][T$O+B/#8Q:"N
MUZ[$0CQW%83TWLT1-`]>(U?+BY<+D^'):Z34]%UXS:-7LJ0<=34PXJQKE,=P
MV+563G:K>]T*]1Y0S?#J&^-E)QH^:'R3C5'B?\HU1G0/H,28@3\WNK*V"L[V
M_!0S%10C?Q])^$G\T=`+$LL2"K6,)U3(MY6J'M\[?YSI23*RT?4(R6^#R-K_
M2_M[^@07T8()"?US9JE\P?_/<R4].M8\=%[0G50;2+O?;X;_1[GIXLJ)]AJK
M]$5U&_U;Q'7*]EV%/X__JNJ3;.Q:[0*#]K^^=^CE>V#$)=XG\/+TVDG5V*GT
MF[#PIVL1<K(J<-3->5G-OIGC+E8D]>=SY%5_+^+0J_YHC?I4QUZ+\Q,G7_57
M.`D[%?EME3.1/>)\:V%ZM_"MI"*G7(<#ZJ2+GB^Z!2PG.\7>N87S@=DDK^3'
M6^3(J_[^=SCT?E.I'N\3`:CM^OKT'W6844!9PA]8_>FG05:445<S:O["7JU=
M7-1_1R?BX^JAVPMEG8GS]C:.]39W+M;&$^DK;.3X3.<(3%GA#L+<)5AM*Q2[
M!2.F*VJ::AD4^9^I=GG6^3OMAT:28(?S3_51@S][W+W"DEQC^PS+H)15\$^T
M"/QSO*[["K6I%\%S<#_=Z-">:&S":ZZ\+>V>G\.?X^)"[1P]<1XJ.F77VB<_
M::<VK[!C=Z<H7G+R('XS-OC1?)EB:^?T3\QRDY/[3?CJ1_EN!Y'G^0YK:H!9
MSAU__*.B5"]XYZ\]9>M[?-&8DV8;73DP?YY+R]@`*>+1Y'ZT&(?Y@V=?]2-3
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M@^$6U0YI[?ZF2U,D`CEE9RM?75_#\QT>ZHJ$2^B_+E$PJ96_.H%G7.(:!4U8
M\DJ%-V??'@Y=4O*J18F\G,T;<U[?G&'Y"Q@B4J;#4Q=&]5\P(PI]4;>*I4I,
86;HK[F:EDL/#MV_S=>O_!Q6_S0T7&@0`
`
end

Re: ../../gcc/java/class.c:1882: `JCR_SECTION_NAME' undeclared in emit_register_classes

[John David Anglin]

> The following bootstrap error occurs with mainline under hppa1.1-hp-hpux10.20:
> 
> stage1/xgcc -Bstage1/ -B/usr/local/hppa1.1-hp-hpux10.20/bin/ -c  -DIN_GCC    -g -O2 -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes   -DHAVE_CONFIG_H    -I. -Ijava -I../../gcc -I../../gcc/java -I../../gcc/config -I../../gcc/../include ../../gcc/java/class.c -o java/class.o
> ../../gcc/java/class.c: In function `emit_register_classes':
> ../../gcc/java/class.c:1882: `JCR_SECTION_NAME' undeclared (first use in this function)
> ../../gcc/java/class.c:1882: (Each undeclared identifier is reported only once
> ../../gcc/java/class.c:1882: for each function it appears in.)
> make[2]: *** [java/class.o] Error 1

This patch fixes the problem.  Compile checked on hppa1.1-hp-hpux10.20 and
bootstrap and regression tested on i686-pc-linux-gnu.

OK for main?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-08-09  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* defaults.h (JCR_SECTION_NAME): Don't conditionalize definition.

--- defaults.h.orig	Thu Aug  9 12:49:01 2001
+++ defaults.h	Thu Aug  9 12:54:45 2001
@@ -217,14 +217,12 @@
 #endif
 #endif
 
-/* If we have named section and we support weak symbols, then use the
-   .jcr section for recording java classes which need to be registered
-   at program start-up time.  */
-#if defined (TARGET_ASM_NAMED_SECTION) && SUPPORTS_WEAK
+/* Provide default .jcr section name for recording java classes which need
+   to be registered at program start-up.  This is only used if we support
+   named sections and weak symbols.  */
 #ifndef JCR_SECTION_NAME
 #define JCR_SECTION_NAME ".jcr"
 #endif
-#endif
 
 /* If we have no definition for UNIQUE_SECTION, but do have the 
    ability to generate arbitrary sections, construct something

Re: ../../gcc/java/class.c:1882: `JCR_SECTION_NAME' undeclared in emit_register_classes

[Richard Henderson]

On Thu, Aug 09, 2001 at 05:46:41PM -0400, John David Anglin wrote:
> 	* defaults.h (JCR_SECTION_NAME): Don't conditionalize definition.

Not ok -- crtstuff depends on this not being defined appropriately.
The bug is in java/class.c.


r~

Re: Simple returns are broken in gcc 3.X

[John David Anglin]

> In looking into why g++ didn't work for vax-dec-ultrix4.3, I have found
> that simple returns are broken.  Compiling this small test program
> 
> static char *
> srealloc (char *p, char *q, int i)
> {
>   if (i == 0)
>     return p;
>   else
>     return q;
> }
> 
> yields
> 
> #NO_APP
> 	.text
> 	.align 1
> __Z8sreallocPcS_i:
> 	.word 0x0
> 	subl2 $12,sp
> 	tstl 12(ap)
> 	jneq L2
> 	ret
> L2:
> 	ret

This patch fixes the above problem by always forcing a "goto" return.
The patch only affects the vax since it is the only remaining port that
doesn't define an epilogue and allows the expansion of simple returns
prior to reload.  This patch changes the vax port to use the same
code patch for return generation as all others.  As a side benefit, the
change also fixes function instrumentation on the vax.

The above behavior is a regression versus previous gcc versions since
g++ was functional on the vax in version 2.8.1.

Full bootstrap has been done with vax-dec-ultrix4.3 with 3.0 branch.
Bootstrap and regression checked with 3.0 branch on hppa1.1-hp-hpux10.20
and i686-pc-linux-gnu.  Bootstrap and regression checked with 3.1
mainline on i686-pc-linux-gnu.

OK for main?  I would like it on the branch as well but there are a
couple of other patches needed before C++ will be fully functional
on the vax.  Thus, it can wait until after 3.0.1 is released.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-08-09  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* stmt.c (expand_null_return_1): Remove code to generate simple returns 
	and "use_goto" argument.
	(expand_null_return, expand_value_return): Update all callers.
	* function.c (expand_function_end): Remove code to generate simple
	return.
	* config/vax/vax.md (epilogue): New expander for function return.
	* doc/md.texi (epilogue): Remove "if defined".

--- stmt.c.orig	Tue Jul 31 10:22:56 2001
+++ stmt.c	Wed Aug  1 15:52:05 2001
@@ -403,7 +403,7 @@
 static void expand_nl_goto_receivers	PARAMS ((struct nesting *));
 static void fixup_gotos			PARAMS ((struct nesting *, rtx, tree,
 					       rtx, int));
-static void expand_null_return_1	PARAMS ((rtx, int));
+static void expand_null_return_1	PARAMS ((rtx));
 static void expand_value_return		PARAMS ((rtx));
 static int tail_recursion_args		PARAMS ((tree, tree));
 static void expand_cleanups		PARAMS ((tree, tree, int, int));
@@ -2863,7 +2863,6 @@
 void
 expand_null_return ()
 {
-  struct nesting *block = block_stack;
   rtx last_insn = get_last_insn ();
 
   /* If this function was declared to return a value, but we
@@ -2871,13 +2870,7 @@
      propogated live to the rest of the function.  */
   clobber_return_register ();
 
-  /* Does any pending block have cleanups?  */
-  while (block && block->data.block.cleanups == 0)
-    block = block->next;
-
-  /* If yes, use a goto to return, since that runs cleanups.  */
-
-  expand_null_return_1 (last_insn, block != 0);
+  expand_null_return_1 (last_insn);
 }
 
 /* Generate RTL to return from the current function, with value VAL.  */
@@ -2886,7 +2879,6 @@
 expand_value_return (val)
      rtx val;
 {
-  struct nesting *block = block_stack;
   rtx last_insn = get_last_insn ();
   rtx return_reg = DECL_RTL (DECL_RESULT (current_function_decl));
 
@@ -2913,27 +2905,15 @@
 	emit_move_insn (return_reg, val);
     }
 
-  /* Does any pending block have cleanups?  */
-
-  while (block && block->data.block.cleanups == 0)
-    block = block->next;
-
-  /* If yes, use a goto to return, since that runs cleanups.
-     Use LAST_INSN to put cleanups *before* the move insn emitted above.  */
-
-  expand_null_return_1 (last_insn, block != 0);
+  expand_null_return_1 (last_insn);
 }
 
 /* Output a return with no value.  If LAST_INSN is nonzero,
-   pretend that the return takes place after LAST_INSN.
-   If USE_GOTO is nonzero then don't use a return instruction;
-   go to the return label instead.  This causes any cleanups
-   of pending blocks to be executed normally.  */
+   pretend that the return takes place after LAST_INSN.  */
 
 static void
-expand_null_return_1 (last_insn, use_goto)
+expand_null_return_1 (last_insn)
      rtx last_insn;
-     int use_goto;
 {
   rtx end_label = cleanup_label ? cleanup_label : return_label;
 
@@ -2941,27 +2921,8 @@
   do_pending_stack_adjust ();
   last_expr_type = 0;
 
-  /* PCC-struct return always uses an epilogue.  */
-  if (current_function_returns_pcc_struct || use_goto)
-    {
-      if (end_label == 0)
-	end_label = return_label = gen_label_rtx ();
-      expand_goto_internal (NULL_TREE, end_label, last_insn);
-      return;
-    }
-
-  /* Otherwise output a simple return-insn if one is available,
-     unless it won't do the job.  */
-#ifdef HAVE_return
-  if (HAVE_return && use_goto == 0 && cleanup_label == 0)
-    {
-      emit_jump_insn (gen_return ());
-      emit_barrier ();
-      return;
-    }
-#endif
-
-  /* Otherwise jump to the epilogue.  */
+  if (end_label == 0)
+     end_label = return_label = gen_label_rtx ();
   expand_goto_internal (NULL_TREE, end_label, last_insn);
 }
 \f
--- function.c.orig	Sat Jun  9 15:22:26 2001
+++ function.c	Wed Aug  1 12:40:23 2001
@@ -6949,18 +6949,6 @@
      instead of using the general framework.  */
   use_return_register ();
 
-  /* Output a return insn if we are using one.
-     Otherwise, let the rtl chain end here, to drop through
-     into the epilogue.  */
-
-#ifdef HAVE_return
-  if (HAVE_return)
-    {
-      emit_jump_insn (gen_return ());
-      emit_barrier ();
-    }
-#endif
-
   /* Fix up any gotos that jumped out to the outermost
      binding level of the function.
      Must follow emitting RETURN_LABEL.  */
--- config/vax/vax.md.orig	Sun Jan 14 04:08:51 2001
+++ config/vax/vax.md	Tue Jul 31 22:08:45 2001
@@ -1926,6 +1926,15 @@
   ""
   "ret")
 
+(define_expand "epilogue"
+  [(return)]
+  ""
+  "
+{
+  emit_jump_insn (gen_return ());
+  DONE;
+}")
+
 (define_insn "nop"
   [(const_int 0)]
   ""
--- doc/md.texi.orig	Thu Jun 14 18:54:21 2001
+++ doc/md.texi	Thu Aug  9 12:24:04 2001
@@ -2859,7 +2859,7 @@
 
 @cindex @code{epilogue} instruction pattern
 @item @samp{epilogue}
-This pattern, if defined, emits RTL for exit from a function.  The function
+This pattern emits RTL for exit from a function.  The function
 exit is responsible for deallocating the stack frame, restoring callee saved
 registers and emitting the return instruction.
 

Re: Simple returns are broken in gcc 3.X

[Richard Henderson]

On Thu, Aug 09, 2001 at 06:12:04PM -0400, John David Anglin wrote:
> 	* stmt.c (expand_null_return_1): Remove code to generate simple returns 
> 	and "use_goto" argument.
> 	(expand_null_return, expand_value_return): Update all callers.
> 	* function.c (expand_function_end): Remove code to generate simple
> 	return.
> 	* config/vax/vax.md (epilogue): New expander for function return.
> 	* doc/md.texi (epilogue): Remove "if defined".

Ok.


r~

Re: fix execute/20010518-2.c

[John David Anglin]

> will support this but again there is the problem of turning this support
> off when gas isn't used.  In a brief look at toplev.c, it didn't look
> like setting DWARF2_DEBUGGING_INFO to zero would do it.

Forget about this.  The function override_options in pa.c turns off
debugging when gas isn't used.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: fix execute/20010518-2.c

[John David Anglin]

> I am currently testing the following change to the PA config together
> with the patch you sent.  It will take a couple of days to run with and
> without gas.

New problem: HP as doesn't like undefined symbols without corresponding
.IMPORT directive:

/xxx/gnu/gcc-3.1/objdir/gcc/xgcc -B/xxx/gnu/gcc-3.1/objdir/gcc/ -nostdinc++ -L/xxx/gnu/gcc-3.1/objdir/hppa1.1-hp-hpux10.20/libstdc++-v3/src -L/xxx/gnu/gcc-3.1/objdir/hppa1.1-hp-hpux10.20/libstdc++-v3/src/.libs -B/usr/local/hppa1.1-hp-hpux10.20/bin/ -B/usr/local/hppa1.1-hp-hpux10.20/lib/ -isystem /usr/local/hppa1.1-hp-hpux10.20/include -I../../../../libstdc++-v3/../gcc -I../../../../libstdc++-v3/../include -I/xxx/gnu/gcc-3.1/objdir/hppa1.1-hp-hpux10.20/libstdc++-v3/include/hppa1.1-hp-hpux10.20 -I/xxx/gnu/gcc-3.1/objdir/hppa1.1-hp-hpux10.20/libstdc++-v3/include -I../../../../libstdc++-v3/libsupc++ -O2 -fno-implicit-templates -Wall -Wno-format -W -Wwrite-strings -Winline -fdiagnostics-show-location=once -g -c ../../../../libstdc++-v3/libsupc++/eh_aux_runtime.cc  -fPIC -DPIC -o eh_aux_runtime.o
cc1plus: warning: -g is only supported when using GAS on this processor,
cc1plus: warning: -g option disabled.
as: error 7403: undefined label - _ZTVN10__cxxabiv120__si_class_type_infoE (7403)

Gas will assemble the file without problem.  The demangled symbol is:

         U vtable for __cxxabiv1::__si_class_type_info

We have the following references in the assembler file:

        .SPACE $PRIVATE$
	.SUBSPA $DATA$

	.stabs  "__ti_0:S79=xs__si_class_type_info_pseudo:",38,0,56,_ZTISt10bad_typeid
        .align 4
_ZTISt10bad_typeid
	.word _ZTVN10__cxxabiv120__si_class_type_infoE+8
	.word _ZTSSt10bad_typeid
	.word _ZTISt9exception
	.stabs  "__ti_1:S79",38,0,56,_ZTISt8bad_cast
	.align 4
_ZTISt8bad_cast
	.word _ZTVN10__cxxabiv120__si_class_type_infoE+8
	.word _ZTSSt8bad_cast
	.word _ZTISt9exception

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: fix execute/20010518-2.c

[Richard Henderson]

On Fri, Aug 24, 2001 at 01:55:41AM -0400, John David Anglin wrote:
> New problem: HP as doesn't like undefined symbols without corresponding
> .IMPORT directive:

We're probably missing calls to assemble_external in
output_function_exception_table.


r~

as: error 7403: undefined label - _ZTVN10__cxxabiv120__si_class_type_infoE [was Re: fix execute/20010518-2.c]

[John David Anglin]

> On Fri, Aug 24, 2001 at 01:55:41AM -0400, John David Anglin wrote:
> > New problem: HP as doesn't like undefined symbols without corresponding
> > .IMPORT directive:
> 
> We're probably missing calls to assemble_external in
> output_function_exception_table.

I don't think the problem is in output_function_exception_table.  This
small program demonstrates the problem.

namespace std
{

    class exception
    {
    public:
      exception() throw() { }
      virtual ~exception() throw();
};

  class bad_typeid : public exception
    {
    public:
      bad_typeid () throw() { }
      virtual ~bad_typeid () throw();
    };

}

extern "C" void __cxa_bad_typeid ();

extern "C" void
__cxa_bad_typeid ()
{
  throw std::bad_typeid();
}

In the assembler output from both hppa1.1-hp-hpux10.20 and i686-pc-linux-gnu,
the symbol _ZTVN10__cxxabiv120__si_class_type_infoE is not defined.  However,
GAS doesn't care that there is no .weak or .global statement for it.

A work around is to include <cxxabi.h>.  If this is the correct solution,
then a lot of code needs fixing.

On i686, the symbol looked OK to me after finish_vtable_vardecl.  Still
trying to figure out why assemble_external isn't being called.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: CVS Problem: java/parse.c and java/parse-scan.c deleted

[John David Anglin]

> > Probably by http://gcc.gnu.org/ml/gcc-patches/2001-09/msg00119.html
> 
> I wonder if gcc_update should check to see if a file exists before
> touching it?

This prints a warning if a dependent file doesn't exist.  OK?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-09-06  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* gcc_update (touch_files): Print warning if file does not exist.

--- gcc_update.orig	Wed Sep  5 10:50:35 2001
+++ gcc_update	Thu Sep  6 01:36:21 2001
@@ -114,6 +114,9 @@
     files_and_dependencies | sed 's, .*, \\,' >> Makefile.$$
     echo ':' >> Makefile.$$
     echo '	@for f in $?; do test -f $$f || exit 0; done; \' >> Makefile.$$
+    echo '	if [ ! -f $@ ] ; then \' >> Makefile.$$
+    echo '	  echo Warning: $@ does not exist. 1>&2; \' >> Makefile.$$
+    echo '	fi; \' >> Makefile.$$
     echo '	echo Touching $@...; \' >> Makefile.$$
     echo '	echo Touching $@... 1>&2; \' >> Makefile.$$
     echo '	touch $@' >> Makefile.$$

Re: PATCH: pass outgoing float arguments in both floating and general registers in indirect calls using 32 bit ABI

[John David Anglin]

> Floating arguments should be passed in both general and floating registers
> in indirect ($$dyncall) calls in the 32 bit ABI when using the HP assembler.
> The reason is there is no way to specify argument locations in static
> functions when the HP assembler is used.  The ABI requires that arguments
> in indirect calls be passed in general registers.  However, the default
> location is in the floating registers and this is where a static function
> expects floating arguments.  This change makes gcc consist in its behaviour
> with the HP compiler.
> 
> Bootstrap checked with both gnu and HP assembler on hppa1.1-hp-hpux10.20.
> 
> OK?
> 

Oops.

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-09-05  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa.c (function_arg): Pass floating arguments in both general and
	floating registers in indirect (dynamic) calls when generating code
	for the 32 bit ABI and the HP assembler.

--- pa.c.orig	Wed Aug 22 13:32:28 2001
+++ pa.c	Wed Sep  5 15:48:47 2001
@@ -7145,22 +7145,30 @@
 					 gen_rtx_REG (DImode, gpr_reg_base),
 					 GEN_INT (8))));
     }
-  /* Determine if the register needs to be passed in both general and
+  /* Determine if the argument needs to be passed in both general and
      floating point registers.  */
-  if ((TARGET_PORTABLE_RUNTIME || TARGET_64BIT || TARGET_ELF32)
-      /* If we are doing soft-float with portable runtime, then there
-	 is no need to worry about FP regs.  */
-      && ! TARGET_SOFT_FLOAT
-      /* The parameter must be some kind of float, else we can just
-	 pass it in integer registers.  */
-      && FLOAT_MODE_P (mode)
-      /* The target function must not have a prototype.  */
-      && cum->nargs_prototype <= 0
-      /* libcalls do not need to pass items in both FP and general
-	 registers.  */
-      && type != NULL_TREE
-      /* All this hair applies to outgoing args only.  */
-      && !incoming)
+  if (((TARGET_PORTABLE_RUNTIME || TARGET_64BIT || TARGET_ELF32)
+       /* If we are doing soft-float with portable runtime, then there
+	  is no need to worry about FP regs.  */
+       && ! TARGET_SOFT_FLOAT
+       /* The parameter must be some kind of float, else we can just
+	  pass it in integer registers.  */
+       && FLOAT_MODE_P (mode)
+       /* The target function must not have a prototype.  */
+       && cum->nargs_prototype <= 0
+       /* libcalls do not need to pass items in both FP and general
+	  registers.  */
+       && type != NULL_TREE
+       /* All this hair applies to outgoing args only.  */
+       && ! incoming)
+      /* Also pass outgoing floating arguments in both registers in indirect
+	 calls with the 32 bit ABI and the HP assembler since there is no
+	 way to the specify argument locations in static functions.  */
+      || (! TARGET_64BIT
+	  && ! TARGET_GAS
+	  && ! incoming
+	  && cum->indirect
+	  && FLOAT_MODE_P (mode)))
     {
       retval
 	= gen_rtx_PARALLEL

Re: PATCH: pass outgoing float arguments in both floating and general registers in indirect calls using 32 bit ABI

[law]

  In message < 200109221835.f8MIZcnS023564@hiauly1.hia.nrc.ca >you write:
  > > Floating arguments should be passed in both general and floating register
  > s
  > > in indirect ($$dyncall) calls in the 32 bit ABI when using the HP assembl
  > er.
  > > The reason is there is no way to specify argument locations in static
  > > functions when the HP assembler is used.  The ABI requires that arguments
  > > in indirect calls be passed in general registers.  However, the default
  > > location is in the floating registers and this is where a static function
  > > expects floating arguments.  This change makes gcc consist in its behavio
  > ur
  > > with the HP compiler.
  > > 
  > > Bootstrap checked with both gnu and HP assembler on hppa1.1-hp-hpux10.20.
  > > 
  > > OK?
  > > 
  > 
  > Oops.
  > 
  > -- 
  > J. David Anglin                                  dave.anglin@nrc.ca
  > National Research Council of Canada              (613) 990-0752 (FAX: 952-6
  > 605)
  > 
  > 2001-09-05  John David Anglin  <dave@hiauly1.hia.nrc.ca>
  > 
  > 	* pa.c (function_arg): Pass floating arguments in both general and
  > 	floating registers in indirect (dynamic) calls when generating code
  > 	for the 32 bit ABI and the HP assembler.
This is fine.  Please install.

Thanks,
jeff

Re: tiny tree.c update

[John David Anglin]

> I got back to working on the vax port on the mainline last weekend.  Your
> "tiny tree.c update" breaks the build on the vax in fixup_unsigned_type.
> It partially reverted:
> 
> Thu Oct  8 05:56:00 1998  Jeffrey A Law  (law@cygnus.com)
> 
>         * c-common.c (type_for_mode): Only return TItype nodes when
> 	HOST_BITS_PER_WIDE_INT is >= 64 bits.
> 	* c-decl.c (intTI_type_node, unsigned_intTI_type_node): Only declare
> 	when HOST_BITS_PER_WIDE_INT is >= 64 bits.
> 	(init_decl_processing): Only create TItype nodes when
> 	HOST_BITS_PER_WIDE_INT is >= 64 bits.
> 	* c-tree.h (intTI_type_node, unsigned_intTI_type_node): Only declare
> 	when HOST_BITS_PER_WIDE_INT is >= 64 bits.

I'm sorry.  The correct patch that got reverted was:

Wed May 17 18:06:12 2000  John David Anglin <dave@hiauly1.hia.nrc.ca>

        * mklibgcc.in Add missing -DL$name when compiling modules in libgcc1.c.

	* tree.c (build_common_tree_nodes): Do not build TI nodes unless
	HOST_BITS_PER_WIDE_INT is >= 64.

The early patch was I believe the first fix.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: tiny tree.c update

[Jan Hubicka]

> > I got back to working on the vax port on the mainline last weekend.  Your
> > "tiny tree.c update" breaks the build on the vax in fixup_unsigned_type.
> > It partially reverted:
> > 
> > Thu Oct  8 05:56:00 1998  Jeffrey A Law  (law@cygnus.com)
> > 
> >         * c-common.c (type_for_mode): Only return TItype nodes when
> > 	HOST_BITS_PER_WIDE_INT is >= 64 bits.
> > 	* c-decl.c (intTI_type_node, unsigned_intTI_type_node): Only declare
> > 	when HOST_BITS_PER_WIDE_INT is >= 64 bits.
> > 	(init_decl_processing): Only create TItype nodes when
> > 	HOST_BITS_PER_WIDE_INT is >= 64 bits.
> > 	* c-tree.h (intTI_type_node, unsigned_intTI_type_node): Only declare
> > 	when HOST_BITS_PER_WIDE_INT is >= 64 bits.
> 
> I'm sorry.  The correct patch that got reverted was:
> 
> Wed May 17 18:06:12 2000  John David Anglin <dave@hiauly1.hia.nrc.ca>
> 
>         * mklibgcc.in Add missing -DL$name when compiling modules in libgcc1.c.
> 
> 	* tree.c (build_common_tree_nodes): Do not build TI nodes unless
> 	HOST_BITS_PER_WIDE_INT is >= 64.
> 
> The early patch was I believe the first fix.

We need the TImodes for SSE on i386, that is 32bit.  The trick is that we don't do
any computation in that mode so everything "works" even when the compiler is not
able to repreent the constants.

Can you describe the VAX problem in more detail?

Honza
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: tiny tree.c update

[John David Anglin]

> Can you describe the VAX problem in more detail?

The vax "ext" instructions generate illegal instruction faults 
when the shift treated as unsigned is > 32 or when the position
specifier (again unsigned) is > 31.

The following code in fixup_unsigned_type causes problems when TI
nodes are built on the vax:

  TYPE_MAX_VALUE (type)
      = build_int_2 (precision - HOST_BITS_PER_WIDE_INT >= 0
		     ? -1 : ((HOST_WIDE_INT) 1 << precision) - 1,
		     precision - HOST_BITS_PER_WIDE_INT > 0
		     ? ((unsigned HOST_WIDE_INT) ~0
		        >> (HOST_BITS_PER_WIDE_INT
			    - (precision - HOST_BITS_PER_WIDE_INT)))
		     : 0);

The right shift in the above evaluates to -64 when HOST_BITS_PER_WIDE_INT
is 32:  32 - (128 - 32).  The behaviour of the right shift operator is
undefined when the shift specified is negative and on the vax it
generates an illegal insn trap.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Check all insns in fallthru to see if label is mentioned

[John David Anglin]

> 2001-10-01  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* cfgcleanup.c (label_mentioned_p): New function.
> 	(try_optimize_cfg): Use it.

In the continuing saga of trying to get the vax bootstrap to work on
the main, I found that the above patch exposes what appears to be a
bug in rtx_equal_p.  It currently may call strcmp with one or both
arguments being null pointers.  This happens with "code_label" rtx's.

The strcmp function on i686-pc-linux-gnu apparently is not prepared to
handle null pointers and generates a segmentation fault.  My original
testing of the patch was on hppa1.1-hp-hpux10.20.  Its strcmp treats
null pointers the same as pointers to empty strings.

I have updated the patch to fix this problem.  Bootstrapped and checked
on i686-pc-linux-gnu.

OK?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-10-03  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* cfgcleanup.c (label_mentioned_p): New function.
	(try_optimize_cfg): Use it.

	* rtl.c (rtx_equal_p): Check for null pointers when comparing rtx
	strings.

--- cfgcleanup.c.orig	Fri Sep 21 18:29:23 2001
+++ cfgcleanup.c	Fri Sep 28 16:09:38 2001
@@ -52,6 +52,7 @@
 						 rtx *, rtx *));
 
 static bool delete_unreachable_blocks	PARAMS ((void));
+static bool label_mentioned_p		PARAMS ((rtx, rtx));
 static bool tail_recursion_label_p	PARAMS ((rtx));
 static void merge_blocks_move_predecessor_nojumps PARAMS ((basic_block,
 							  basic_block));
@@ -248,6 +249,22 @@
   return changed;
 }
 \f
+/* Return true if LABEL is mentioned in any insn from INSN up to
+   but not including the label.  */
+
+static bool
+label_mentioned_p (label, insn)
+     rtx label, insn;
+{
+  rtx x;
+
+  for (x = insn; x != label; x = NEXT_INSN (x))
+    if (reg_mentioned_p (label, x))
+      return true;
+
+  return false;
+}
+
 /* Return true if LABEL is used for tail recursion.  */
 
 static bool
@@ -1096,7 +1113,7 @@
 	      /* If previous block ends with condjump jumping to next BB,
 	         we can't delete the label.  */
 	      && (b->pred->src == ENTRY_BLOCK_PTR
-		  || !reg_mentioned_p (b->head, b->pred->src->end)))
+		  || !label_mentioned_p (b->head, b->pred->src->end)))
 	    {
 	      rtx label = b->head;
 	      b->head = NEXT_INSN (b->head);
--- rtl.c.orig	Wed Aug 22 11:33:57 2001
+++ rtl.c	Wed Oct  3 11:34:19 2001
@@ -650,7 +650,9 @@
 
 	case 'S':
 	case 's':
-	  if (strcmp (XSTR (x, i), XSTR (y, i)))
+	  if ((XSTR (x, i) || XSTR (y, i))
+	      && (! XSTR (x, i) || ! XSTR (y, i)
+		  || strcmp (XSTR (x, i), XSTR (y, i))))
 	    return 0;
 	  break;
 

Re: PATCH: Check all insns in fallthru to see if label is mentioned

[Richard Henderson]

On Wed, Oct 03, 2001 at 03:08:12PM -0400, John David Anglin wrote:
> 	* cfgcleanup.c (label_mentioned_p): New function.
> 	(try_optimize_cfg): Use it.

Rather than search, this check ought to be

              && (!(mode & CLEANUP_PRE_SIBCALL)
                  || !tail_recursion_label_p (b->head))
-             /* If previous block ends with condjump jumping to next BB,
-                we can't delete the label.  */
-             && (b->pred->src == ENTRY_BLOCK_PTR
-                 || !reg_mentioned_p (b->head, b->pred->src->end)))
+	      /* If the previous block ends with a branch to this block,
+		 we can't delete the label.  Normally this is a condjump
+		 that is yet to be simplified, but if CASE_DROPS_THRU,
+		 this can be a tablejump with some element going to the
+		 same place as the default (fallthru).  */
+	      && (b->pred->src == ENTRY_BLOCK_PTR
+		  || GET_CODE (b->pred->src->end) != JUMP_INSN
+		  || ! label_is_jump_target_p (b->head, b->pred->src->end)))


/* Return true if LABEL is a target of JUMP_INSN.  This applies only
   to non-complex jumps.  That is, direct unconditional, conditional,
   and tablejumps, but not computed jumps or returns.  It also does
   not apply to the fallthru case of a conditional jump.  */

bool
label_is_jump_target_p (label, jump_insn)
     rtx label, jump_insn;
{
  rtx tmp = JUMP_LABEL (jump_insn);

  if (label == tmp)
    return true;

  if (tmp != NULL_RTX
      && (tmp = NEXT_INSN (tmp)) != NULL_RTX
      && GET_CODE (tmp) == JUMP_INSN
      && (tmp = PATTERN (tmp),
	  GET_CODE (tmp) == ADDR_VEC
	  || GET_CODE (tmp) == ADDR_DIFF_VEC))
    {
      rtvec vec = XVEC (tmp, GET_CODE (tmp) == ADDR_DIFF_VEC);
      int i, veclen = GET_NUM_ELEM (vec);

      for (i = 0; i < veclen; ++i)
	if (XEXP (RTVEC_ELT (vec, i), 0) == label)
	  return true;
    }

  return false;
}

> 	* rtl.c (rtx_equal_p): Check for null pointers when comparing rtx
> 	strings.

The cfgcleanup thing aside, this is ok.


r~

Re: PATCH: Check all insns in fallthru to see if label is mentioned

[John David Anglin]

> > On Wed, Oct 03, 2001 at 03:08:12PM -0400, John David Anglin wrote:
> > > 	* cfgcleanup.c (label_mentioned_p): New function.
> > > 	(try_optimize_cfg): Use it.
> > 
> 
> Rather than search, this check ought to be

I reworked your comments into a patch for cfgcleanup.c.  The only change
is the addition of `static' to the declaration of label_is_jump_target_p.
I have tested with a complete bootstrap and check under hppa2.0w-hp-hpux11.11.
There might be two regressions:

FAIL: gcc.c-torture/execute/strct-pack-1.c execution,  -O2
FAIL: gcc.c-torture/execute/strct-pack-1.c execution,  -Os

These started failing in execution at some point after Dec. 1.  It will
be a few days before I can examine these in more detail.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-12-08  Richard Henderson  <rth@redhat.com>

	* cfgcleanup.c (label_is_jump_target_p): New function.
	(try_optimize_cfg): Use label_is_jump_target_p to check if label is
	target of a JUMP_INSN from the preceding block.

--- cfgcleanup.c.orig	Thu Nov 15 14:55:33 2001
+++ cfgcleanup.c	Thu Dec  6 11:06:42 2001
@@ -69,6 +69,7 @@
 						 rtx *, rtx *));
 
 static bool delete_unreachable_blocks	PARAMS ((void));
+static bool label_is_jump_target_p	PARAMS ((rtx, rtx));
 static bool tail_recursion_label_p	PARAMS ((rtx));
 static void merge_blocks_move_predecessor_nojumps PARAMS ((basic_block,
 							  basic_block));
@@ -291,6 +292,38 @@
   return changed;
 }
 \f
+/* Return true if LABEL is a target of JUMP_INSN.  This applies only
+   to non-complex jumps.  That is, direct unconditional, conditional,
+   and tablejumps, but not computed jumps or returns.  It also does
+   not apply to the fallthru case of a conditional jump.  */
+
+static bool
+label_is_jump_target_p (label, jump_insn)
+     rtx label, jump_insn;
+{
+  rtx tmp = JUMP_LABEL (jump_insn);
+
+  if (label == tmp)
+    return true;
+
+  if (tmp != NULL_RTX
+      && (tmp = NEXT_INSN (tmp)) != NULL_RTX
+      && GET_CODE (tmp) == JUMP_INSN
+      && (tmp = PATTERN (tmp),
+	  GET_CODE (tmp) == ADDR_VEC
+	  || GET_CODE (tmp) == ADDR_DIFF_VEC))
+    {
+      rtvec vec = XVEC (tmp, GET_CODE (tmp) == ADDR_DIFF_VEC);
+      int i, veclen = GET_NUM_ELEM (vec);
+
+      for (i = 0; i < veclen; ++i)
+	if (XEXP (RTVEC_ELT (vec, i), 0) == label)
+	  return true;
+    }
+
+  return false;
+}
+
 /* Return true if LABEL is used for tail recursion.  */
 
 static bool
@@ -1162,10 +1195,14 @@
 	      && GET_CODE (b->head) == CODE_LABEL
 	      && (!(mode & CLEANUP_PRE_SIBCALL)
 		  || !tail_recursion_label_p (b->head))
-	      /* If previous block ends with condjump jumping to next BB,
-	         we can't delete the label.  */
+	      /* If the previous block ends with a branch to this block,
+		 we can't delete the label.  Normally this is a condjump
+		 that is yet to be simplified, but if CASE_DROPS_THRU,
+		 this can be a tablejump with some element going to the
+		 same place as the default (fallthru).  */
 	      && (b->pred->src == ENTRY_BLOCK_PTR
-		  || !reg_mentioned_p (b->head, b->pred->src->end)))
+		  || GET_CODE (b->pred->src->end) != JUMP_INSN
+		  || ! label_is_jump_target_p (b->head, b->pred->src->end)))
 	    {
 	      rtx label = b->head;
 	      b->head = NEXT_INSN (b->head);

Re: PATCH: Check all insns in fallthru to see if label is mentioned

[Richard Henderson]

On Sat, Dec 08, 2001 at 12:22:35PM -0500, John David Anglin wrote:
> 	* cfgcleanup.c (label_is_jump_target_p): New function.
> 	(try_optimize_cfg): Use label_is_jump_target_p to check if label is
> 	target of a JUMP_INSN from the preceding block.

Ok.


r~

Re: PATCH: Use PLUS instead of HIGH/LO_SUM for large constants - take 2 for PA

[John David Anglin]

> 2001-10-29  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* pa.c (emit_move_sequence): Use cint_ok_for_move to check whether a
> 	constant can be loaded in a single instruction to a register.  When
> 	loading immediate constants, use PLUS instead of HIGH/LO_SUM.  Handle
> 	both zero and one extension of "32-bit" constants on 64-bit hosts.
> 	* pa.h (LEGITIMATE_CONSTANT_P): Accept constants that can be built
> 	with ldil/ldo/depdi instruction sequence on 64-bit hosts.
> 	* pa.md: New addmove pattern for adding constant_int to HImode
> 	register and moving result to HImode register.  Remove HImode HIGH
> 	and LO_SUM patterns.

After thinking more about the above patch, I realized that it was trivial
to extend the range of constants handled by 64-bits hosts compiling for
TARGET_64BIT.  This changes the previous patch to take advantage of the
full im5 format used for immediates by the depdi instruction.  Checked
on hppa1.1-hp-hpux10.20 but not on 64-bit host/target.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-10-31  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa.c (emit_move_sequence): Use cint_ok_for_move to check whether a
	constant can be loaded in a single instruction to a register.  When
	loading immediate constants, use PLUS instead of HIGH/LO_SUM.  Use
	depdi for insertion of most significant 32-bits on 64-bit hosts.
	* pa.h (LEGITIMATE_CONSTANT_P): Accept constants that can be built
	with ldil/ldo/depdi instruction sequence on 64-bit hosts.
	* pa.md: New addmove pattern for adding constant_int to HImode
	register and moving result to HImode register.  Remove HImode HIGH
	and LO_SUM patterns.

--- pa.c.orig	Sun Oct 28 16:24:36 2001
+++ pa.c	Wed Oct 31 11:24:25 2001
@@ -1394,7 +1394,8 @@
   else if (register_operand (operand0, mode))
     {
       if (register_operand (operand1, mode)
-	  || (GET_CODE (operand1) == CONST_INT && INT_14_BITS (operand1))
+	  || (GET_CODE (operand1) == CONST_INT
+	      && cint_ok_for_move (INTVAL (operand1)))
 	  || (operand1 == CONST0_RTX (mode))
 	  || (GET_CODE (operand1) == HIGH
 	      && !symbolic_operand (XEXP (operand1, 0), VOIDmode))
@@ -1596,8 +1597,8 @@
       else if (GET_CODE (operand1) != CONST_INT
 	       || ! cint_ok_for_move (INTVAL (operand1)))
 	{
+	  rtx extend = NULL_RTX;
 	  rtx temp;
-	  int need_zero_extend = 0;
 
 	  if (TARGET_64BIT && GET_CODE (operand1) == CONST_INT
 	      && HOST_BITS_PER_WIDE_INT > 32
@@ -1606,15 +1607,18 @@
 	      HOST_WIDE_INT val = INTVAL (operand1);
 	      HOST_WIDE_INT nval;
 
-	      /* If the value is the same after a 32->64bit sign
-		 extension, then we can use it as-is.  Else we will
-		 need to sign extend the constant from 32->64bits
-		 then zero extend the result from 32->64bits.  */
+	      /* Extract the low order 32 bits of the value and sign extend.
+		 If the new value is the same as the original value, we can
+		 can use the original value as-is.  If the new value is
+		 different, we use it and insert the most-significant 32-bits
+		 of the original value into the final result.  */
 	      nval = ((val & (((HOST_WIDE_INT) 2 << 31) - 1))
 		      ^ ((HOST_WIDE_INT) 1 << 31)) - ((HOST_WIDE_INT) 1 << 31);
 	      if (val != nval)
 		{
-		  need_zero_extend = 1;
+#if HOST_BITS_PER_WIDE_INT > 32
+		  extend = GEN_INT (val >> 32);
+#endif
 		  operand1 = GEN_INT (nval);
 		}
 	    }
@@ -1624,19 +1628,44 @@
 	  else
 	    temp = gen_reg_rtx (mode);
 
-	  emit_insn (gen_rtx_SET (VOIDmode, temp,
-				  gen_rtx_HIGH (mode, operand1)));
-	  operands[1] = gen_rtx_LO_SUM (mode, temp, operand1);
-	  emit_move_insn (operands[0], operands[1]);
+	  if (GET_CODE (operand1) == CONST_INT)
+	    {
+	      /* Directly break constant into low and high parts.  This
+		 provides better optimization opportunities because various
+		 passes recognize constants split with PLUS but not LO_SUM.
+		 We use a 14-bit signed low part except when the addition
+		 of 0x4000 to the high part might change the sign of the
+		 high part.  */
+	      HOST_WIDE_INT value = INTVAL (operand1);
+	      HOST_WIDE_INT low = value & 0x3fff;
+	      HOST_WIDE_INT high = value & ~ 0x3fff;
+
+	      if (low >= 0x2000)
+		{
+		  if (high == 0x7fffc000 || (mode == HImode && high == 0x4000))
+		    high += 0x2000;
+		  else
+		    high += 0x4000;
+		}
+
+	      low = value - high;
 
-	  if (need_zero_extend)
+	      emit_insn (gen_rtx_SET (VOIDmode, temp, GEN_INT (high)));
+	      operands[1] = gen_rtx_PLUS (mode, temp, GEN_INT (low));
+	    }
+	  else
 	    {
-	      emit_insn (gen_zero_extendsidi2 (operands[0],
-					       gen_rtx_SUBREG (SImode,
-							       operands[0],
-							       0)));
+	      emit_insn (gen_rtx_SET (VOIDmode, temp,
+				      gen_rtx_HIGH (mode, operand1)));
+	      operands[1] = gen_rtx_LO_SUM (mode, temp, operand1);
 	    }
 
+	  emit_move_insn (operands[0], operands[1]);
+
+	  if (extend != NULL_RTX)
+	    emit_insn (gen_insv (operands[0], GEN_INT (32), const0_rtx,
+				 extend));
+
 	  return 1;
 	}
     }
--- pa.h.orig	Mon Sep 24 12:18:02 2001
+++ pa.h	Tue Oct 30 10:33:39 2001
@@ -1106,8 +1106,8 @@
    && !(TARGET_64BIT && GET_CODE (X) == CONST_DOUBLE)		\
    && !(TARGET_64BIT && GET_CODE (X) == CONST_INT		\
 	&& !(HOST_BITS_PER_WIDE_INT <= 32			\
-	     || (INTVAL (X) >= (HOST_WIDE_INT) -1 << 31		\
-		 && INTVAL (X) < (HOST_WIDE_INT) 1 << 32)	\
+	     || (INTVAL (X) >= (HOST_WIDE_INT) -32 << 31	\
+		 && INTVAL (X) < (HOST_WIDE_INT) 32 << 31)	\
 	     || cint_ok_for_move (INTVAL (X))))			\
    && !function_label_operand (X, VOIDmode))
 
--- pa.md.orig	Sat Jul 14 20:54:21 2001
+++ pa.md	Fri Oct 26 16:03:12 2001
@@ -2604,19 +2604,12 @@
 
 (define_insn ""
   [(set (match_operand:HI 0 "register_operand" "=r")
-	(high:HI (match_operand 1 "const_int_operand" "")))]
+	(plus:HI (match_operand:HI 1 "register_operand" "r")
+		 (match_operand 2 "const_int_operand" "J")))]
   ""
-  "ldil L'%G1,%0"
-  [(set_attr "type" "move")
-   (set_attr "length" "4")])
-
-(define_insn ""
-  [(set (match_operand:HI 0 "register_operand" "=r")
-	(lo_sum:HI (match_operand:HI 1 "register_operand" "r")
-		   (match_operand 2 "const_int_operand" "")))]
-  ""
-  "ldo R'%G2(%1),%0"
-  [(set_attr "type" "move")
+  "ldo %2(%1),%0"
+  [(set_attr "type" "binary")
+   (set_attr "pa_combine_type" "addmove")
    (set_attr "length" "4")])
 
 (define_expand "movqi"

Re: PATCH: Use PLUS instead of HIGH/LO_SUM for large constants - take 2 for PA

[law]

> > 2001-10-29  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> > 
> > 	* pa.c (emit_move_sequence): Use cint_ok_for_move to check whether a
> > 	constant can be loaded in a single instruction to a register.  When
> > 	loading immediate constants, use PLUS instead of HIGH/LO_SUM.  Handle
> > 	both zero and one extension of "32-bit" constants on 64-bit hosts.
> > 	* pa.h (LEGITIMATE_CONSTANT_P): Accept constants that can be built
> > 	with ldil/ldo/depdi instruction sequence on 64-bit hosts.
> > 	* pa.md: New addmove pattern for adding constant_int to HImode
> > 	register and moving result to HImode register.  Remove HImode HIGH
> > 	and LO_SUM patterns.
> 
> After thinking more about the above patch, I realized that it was trivial
> to extend the range of constants handled by 64-bits hosts compiling for
> TARGET_64BIT.  This changes the previous patch to take advantage of the
> full im5 format used for immediates by the depdi instruction.  Checked
> on hppa1.1-hp-hpux10.20 but not on 64-bit host/target.
This seems to be working fine for PA64 too.  I went ahead and installed it.

jeff

Re: PATCH: Use PLUS instead of HIGH/LO_SUM for large constants - take 2 for PA

[law]

> > 2001-10-29  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> > 
> > 	* pa.c (emit_move_sequence): Use cint_ok_for_move to check whether a
> > 	constant can be loaded in a single instruction to a register.  When
> > 	loading immediate constants, use PLUS instead of HIGH/LO_SUM.  Handle
> > 	both zero and one extension of "32-bit" constants on 64-bit hosts.
> > 	* pa.h (LEGITIMATE_CONSTANT_P): Accept constants that can be built
> > 	with ldil/ldo/depdi instruction sequence on 64-bit hosts.
> > 	* pa.md: New addmove pattern for adding constant_int to HImode
> > 	register and moving result to HImode register.  Remove HImode HIGH
> > 	and LO_SUM patterns.
> 
> After thinking more about the above patch, I realized that it was trivial
> to extend the range of constants handled by 64-bits hosts compiling for
> TARGET_64BIT.  This changes the previous patch to take advantage of the
> full im5 format used for immediates by the depdi instruction.  Checked
> on hppa1.1-hp-hpux10.20 but not on 64-bit host/target.
This seems to be working fine for PA64 too.  I went ahead and installed it.

jeff

Re: PATCH: Use PLUS instead of HIGH/LO_SUM for large constants - take 2 for PA

[law]

> > 2001-10-29  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> > 
> > 	* pa.c (emit_move_sequence): Use cint_ok_for_move to check whether a
> > 	constant can be loaded in a single instruction to a register.  When
> > 	loading immediate constants, use PLUS instead of HIGH/LO_SUM.  Handle
> > 	both zero and one extension of "32-bit" constants on 64-bit hosts.
> > 	* pa.h (LEGITIMATE_CONSTANT_P): Accept constants that can be built
> > 	with ldil/ldo/depdi instruction sequence on 64-bit hosts.
> > 	* pa.md: New addmove pattern for adding constant_int to HImode
> > 	register and moving result to HImode register.  Remove HImode HIGH
> > 	and LO_SUM patterns.
> 
> After thinking more about the above patch, I realized that it was trivial
> to extend the range of constants handled by 64-bits hosts compiling for
> TARGET_64BIT.  This changes the previous patch to take advantage of the
> full im5 format used for immediates by the depdi instruction.  Checked
> on hppa1.1-hp-hpux10.20 but not on 64-bit host/target.
This seems to be working fine for PA64 too.  I went ahead and installed it.

jeff

Re: Last alignment change for MEM tracking

[John David Anglin]

> Can I just add the definition for "Zero_Cost_Exceptions" to "system.ads" in
> the gcc directory from the installed system.ads?
> 
>    Zero_Cost_Exceptions : constant Boolean := False;

This gets me a little further:

gcc -c -g   -mdisable-indexing -W -Wall -gnatpg -gnata -I- -I. -I../../../gcc/ad
a ../../../gcc/ada/atree.adb
atree.adb:36:01: warning: unrecognized pragma "Style_Checks"
make[3]: *** [atree.o] Error 1

Do I need to update the installed ada to 3.13p first?  This looks more like
an error than a warning.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ pcc struct return fix

[John David Anglin]

> --- semantics.c.orig	Wed Apr 18 13:51:48 2001
> +++ semantics.c	Wed Apr 18 18:16:58 2001

Oops, forgot description:

2001-11-30  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* semantics.c (simplify_aggr_init_exprs_r): Add DIRECT_BIND flag in
	call to build_aggr_init.

--- semantics.c.orig	Wed Apr 18 13:51:48 2001
+++ semantics.c	Wed Apr 18 18:16:58 2001
@@ -2240,7 +2240,8 @@
       int old_ac = flag_access_control;
 
       flag_access_control = 0;
-      call_expr = build_aggr_init (slot, call_expr, LOOKUP_ONLYCONVERTING);
+      call_expr = build_aggr_init (slot, call_expr,
+				   DIRECT_BIND | LOOKUP_ONLYCONVERTING);
       flag_access_control = old_ac;
       copy_from_buffer_p = 1;
     }

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ pcc struct return fix

[John David Anglin]

> --- semantics.c.orig	Wed Apr 18 13:51:48 2001
> +++ semantics.c	Wed Apr 18 18:16:58 2001

Oops, forgot description:

2001-11-30  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* semantics.c (simplify_aggr_init_exprs_r): Add DIRECT_BIND flag in
	call to build_aggr_init.

--- semantics.c.orig	Wed Apr 18 13:51:48 2001
+++ semantics.c	Wed Apr 18 18:16:58 2001
@@ -2240,7 +2240,8 @@
       int old_ac = flag_access_control;
 
       flag_access_control = 0;
-      call_expr = build_aggr_init (slot, call_expr, LOOKUP_ONLYCONVERTING);
+      call_expr = build_aggr_init (slot, call_expr,
+				   DIRECT_BIND | LOOKUP_ONLYCONVERTING);
       flag_access_control = old_ac;
       copy_from_buffer_p = 1;
     }

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ pcc struct return fix

[Jason Merrill]

>>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

> 	* semantics.c (simplify_aggr_init_exprs_r): Add DIRECT_BIND flag in
> 	call to build_aggr_init.

DIRECT_BIND is for binding temporaries to reference variables; I'm not sure
why this would have any effect on your problem.  Perhaps rather than call
build_aggr_init here, we should be doing an explicit constructor call as in
ocp_convert.

Jason

Re: C++ pcc struct return fix

[John David Anglin]

> >>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:
> 
> > 	* semantics.c (simplify_aggr_init_exprs_r): Add DIRECT_BIND flag in
> > 	call to build_aggr_init.
> 
> DIRECT_BIND is for binding temporaries to reference variables; I'm not sure
> why this would have any effect on your problem.  Perhaps rather than call
> build_aggr_init here, we should be doing an explicit constructor call as in
> ocp_convert.

It is a while since I looked at this problem but roughly what happens is
that build_aggr_init calls ocp_convert which calls simplify_aggr_init_exprs_r
which calls build_aggr_init which calls ...  Look at expand_default_init.
I think this is why DIRECT_BIND has an affect.

I do know that the code generated for function returning a struct seemed
reasonable when DIRECT_BIND was added to the flags in the call.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ pcc struct return fix

[Mark Mitchell]

--On Monday, December 03, 2001 11:40:08 AM -0500 John David Anglin 
<dave@hiauly1.hia.nrc.ca> wrote:

>> >>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:
>>
>> > 	* semantics.c (simplify_aggr_init_exprs_r): Add DIRECT_BIND flag in
>> > 	call to build_aggr_init.
>>
>> DIRECT_BIND is for binding temporaries to reference variables; I'm not
>> sure why this would have any effect on your problem.  Perhaps rather
>> than call build_aggr_init here, we should be doing an explicit
>> constructor call as in ocp_convert.

Since this patch only affects PCC platforms, and since there are so few,
this patch is OK with me for 3.0.3 if Jason becomes convinced.

A test case would probably help.

Thanks,

--
Mark Mitchell                   mark@codesourcery.com
CodeSourcery, LLC               http://www.codesourcery.com

Re: C++ pcc struct return fix

[John David Anglin]

> A test case would probably help.

What about this?  It's "obviously" a good test because it FAILs on 
hppa2.0w-hp-hpux11.11 with the current mainline.  On the PA with main,
struct blah  function foo are missing in the assembler output for some
reason.  It passes on the PA with 3.0.2.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-12-03  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* g++.dg/init/struct-ret1.C: New file.

// { dg-do run }

struct blah { int a[6]; };

inline struct blah foo()
{
  struct blah r = { { 12, 24, 36, 48, 60, 72 } };
  return r;
}

int
main()
{
  struct blah x = foo();

  if (x.a[0] != 12 || x.a[1] != 24 || x.a[2] != 36 || x.a[3] != 48
      || x.a[4] != 60 || x.a[5] != 72)
    return 1;
}

Re: C++ pcc struct return fix

[Mark Mitchell]

--On Monday, December 03, 2001 06:19:10 PM -0500 John David Anglin 
<dave@hiauly1.hia.nrc.ca> wrote:

>> A test case would probably help.
>
> What about this?  It's "obviously" a good test because it FAILs on
> hppa2.0w-hp-hpux11.11 with the current mainline.  On the PA with main,
> struct blah  function foo are missing in the assembler output for some
> reason.  It passes on the PA with 3.0.2.

Good.

Did we ever reach resolution on this issue?

In particular, did we get a patch approved for the mainline?  For
the 3.0 branch?  Is there a patch that needs review, but that hasn't
been reviewed?  (If so, send it to me, and I will review it.)

Thanks,

-- 
Mark Mitchell                mark@codesourcery.com
CodeSourcery, LLC            http://www.codesourcery.com

Re: C++ pcc struct return fix

[John David Anglin]

> Did we ever reach resolution on this issue?

No.

> In particular, did we get a patch approved for the mainline?  For
> the 3.0 branch?  Is there a patch that needs review, but that hasn't
> been reviewed?  (If so, send it to me, and I will review it.)

Jason approved the patch to semantics.c but asked that the comment
about DIRECT_BIND in cp-tree.h reflect this usage.  So, I sent this
update.

<http://gcc.gnu.org/ml/gcc-patches/2001-12/msg00209.html>,

Is this OK?  Jason didn't say anything about the branch in his response.

Personally, the reason that I would like this on the branch is that
it takes about half the memory to build as the main, and thus is
better suited to machines with small amounts of memory.  However,
getting it in 3.0.3 isn't an urgent priority, particularly if a
3.0.4 is planned.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ pcc struct return fix

[Jason Merrill]

>>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

>> Did we ever reach resolution on this issue?
> No.

>> In particular, did we get a patch approved for the mainline?  For
>> the 3.0 branch?  Is there a patch that needs review, but that hasn't
>> been reviewed?  (If so, send it to me, and I will review it.)

> Jason approved the patch to semantics.c but asked that the comment
> about DIRECT_BIND in cp-tree.h reflect this usage.  So, I sent this
> update.

> <http://gcc.gnu.org/ml/gcc-patches/2001-12/msg00209.html>,

I would say "It also forces direct-initialization in cases where other
parts of the compiler have already generated a temporary, such as reference
initialization and the catch parameter."

Thanks.

> Is this OK?  Jason didn't say anything about the branch in his response.

It's also OK for the branch.

Jason

Re: C++ pcc struct return fix

[John David Anglin]

> >>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:
> 
> >> Did we ever reach resolution on this issue?
> > No.

The only issue remaining in this thread is the testcase.  Is this OK for
the main?  There is no change in the test from what I sent previously.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-12-08  John David Anglin  <dave@hiauly1.hia.nrc.ca>

        * g++.dg/init/struct-ret1.C: New file.

--- /dev/null	Sat Dec  8 11:40:02 2001
+++ g++.dg/init/struct-ret1.C	Tue Dec  4 14:15:38 2001
@@ -0,0 +1,19 @@
+// { dg-do run }
+
+struct blah { int a[6]; };
+
+inline struct blah foo()
+{
+  struct blah r = { { 12, 24, 36, 48, 60, 72 } };
+  return r;
+}
+
+int
+main()
+{
+  struct blah x = foo();
+
+  if (x.a[0] != 12 || x.a[1] != 24 || x.a[2] != 36 || x.a[3] != 48
+      || x.a[4] != 60 || x.a[5] != 72)
+    return 1;
+}

Re: C++ pcc struct return fix

[Jason Merrill]

>>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

>> >>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:
>> 
>> > 	* semantics.c (simplify_aggr_init_exprs_r): Add DIRECT_BIND flag in
>> > 	call to build_aggr_init.
>> 
>> DIRECT_BIND is for binding temporaries to reference variables; I'm not sure
>> why this would have any effect on your problem.  Perhaps rather than call
>> build_aggr_init here, we should be doing an explicit constructor call as in
>> ocp_convert.

> It is a while since I looked at this problem but roughly what happens is
> that build_aggr_init calls ocp_convert which calls simplify_aggr_init_exprs_r
> which calls build_aggr_init which calls ...  Look at expand_default_init.
> I think this is why DIRECT_BIND has an affect.

OK, it looks like initialize_handler_parm is already using DIRECT_BIND this
way, so it's just a documentation issue.  This patch is OK for trunk and
branch; please also adjust the comment about DIRECT_BIND in cp-tree.h to
reflect this usage.

Jason

Re: C++ pcc struct return fix

[John David Anglin]

> OK, it looks like initialize_handler_parm is already using DIRECT_BIND this
> way, so it's just a documentation issue.  This patch is OK for trunk and
> branch; please also adjust the comment about DIRECT_BIND in cp-tree.h to
> reflect this usage.

How does this look?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-12-03  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* semantics.c (simplify_aggr_init_exprs_r): Add DIRECT_BIND flag in
	call to build_aggr_init.
	* cp-tree.h (DIRECT_BIND): Document new use of DIRECT_BIND.

--- semantics.c.orig	Wed Apr 18 13:51:48 2001
+++ semantics.c	Wed Apr 18 18:16:58 2001
@@ -2240,7 +2240,8 @@
       int old_ac = flag_access_control;
 
       flag_access_control = 0;
-      call_expr = build_aggr_init (slot, call_expr, LOOKUP_ONLYCONVERTING);
+      call_expr = build_aggr_init (slot, call_expr,
+				   DIRECT_BIND | LOOKUP_ONLYCONVERTING);
       flag_access_control = old_ac;
       copy_from_buffer_p = 1;
     }
--- cp-tree.h.save	Mon Dec  3 13:26:15 2001
+++ cp-tree.h	Mon Dec  3 14:01:31 2001
@@ -3309,7 +3309,9 @@
    LOOKUP_ONLYCONVERTING means that non-conversion constructors are not tried.
    DIRECT_BIND means that if a temporary is created, it should be created so
      that it lives as long as the current variable bindings; otherwise it
-     only lives until the end of the complete-expression.
+     only lives until the end of the complete-expression.  It indicates in
+     reference initialization and in catching an exception that we don't
+     need a new constructor.
    LOOKUP_SPECULATIVELY means return NULL_TREE if we cannot find what we are
      after.  Note, LOOKUP_COMPLAIN is checked and error messages printed
      before LOOKUP_SPECULATIVELY is checked.

Re: HPUX 11 "size_t" fixinc problems

[John David Anglin]

> > I guess the ``__va__list'' will protect my system.
> 
> An underscore could be added before "size_t" in the select for additional
> protection.

I have run this through complete bootstraps and checks on hppa2.0w-hp-hpux11.00
and hppa2.0w-hp-hpux11.11 with no regressions.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-12-01  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* inclhack.def (AAA_time): Delete.
	(hpux_size_t): Revise select and fix for HP-UX 11.11.
	(hpux11_vsnprintf): Likewise.

--- inclhack.def.orig	Thu Sep 13 12:05:12 2001
+++ inclhack.def	Fri Nov 30 15:53:00 2001
@@ -94,16 +94,6 @@
 };
 
 
-/*
- *  Purge some HP-UX 11 files that are only broken after they are "fixed".
- */
-fix = {
-    hackname = AAA_time;
-    files    = sys/time.h;
-    select   = '11.0 and later representation of ki time';
-    replace; /* empty replacement -> no fixing the file */
-};
-
 /* And now, the real fixes, replacement text fixes first: */
 
 /*
@@ -1222,12 +1212,11 @@
  */
 fix = {
     hackname  = hpux11_size_t;
-    mach      = "*-hp-hpux*";
-    select    = "^#define __size_t size_t";
+    mach      = "*-hp-hpux11*";
+    select    = "__size_t";
 
     c_fix     = format;
     c_fix_arg = "_hpux_size_t";
-    c_fix_arg = "__size_t";
 
     test_text =
     "#define __size_t size_t\n"
@@ -1264,17 +1253,17 @@
 
 
 /*
- *  Fix hpux 11.00 broken vsnprintf declaration
+ *  Fix hpux 11.00 broken vsnprintf declaration.
  */
 fix = {
     hackname = hpux11_vsnprintf;
     files    = stdio.h;
-    select   = 'extern int vsnprintf\(char \*, __size_t, const char \*,'
+    select   = 'extern int vsnprintf\(char \*, .*_size_t, const char \*,'
                                      ' __va__list\);';
 
     c_fix     = format;
-    c_fix_arg = "extern int vsnprintf(char *, __size_t, const char *,"
-                                     " __va_list);";
+    c_fix_arg = __va_list;
+    c_fix_arg = __va__list;
 
     test_text = 'extern int vsnprintf(char *, __size_t, const char *,'
                                      ' __va__list);';

Re: HPUX 11 "size_t" fixinc problems

[Bruce Korb]

John David Anglin wrote:

> I have run this through complete bootstraps and checks on hppa2.0w-hp-hpux11.00
> and hppa2.0w-hp-hpux11.11 with no regressions.
> 
> Dave

> --- inclhack.def.orig   Thu Sep 13 12:05:12 2001
> +++ inclhack.def        Fri Nov 30 15:53:00 2001
> @@ -94,16 +94,6 @@
>  };
> 
> 
> -/*
> - *  Purge some HP-UX 11 files that are only broken after they are "fixed".
> - */
> -fix = {
> -    hackname = AAA_time;
> -    files    = sys/time.h;
> -    select   = '11.0 and later representation of ki time';
> -    replace; /* empty replacement -> no fixing the file */
> -};
> -
>  /* And now, the real fixes, replacement text fixes first: */

Hi Dave,

Excellent.  I applied this to the 3.0 branch before Friday's freeze.
I intend to apply a slightly different one to the main line,
barring complaints.  On the theory that all of the "empty replacement"
fixes are really fixes for the broken fixincludes script, my
_guess_ is that they are not needed any more because my version
doesn't make mistakes.  ;-)

Therefore, it is my intention to remove all the empty replacement
non-fixes and wait to see what problems arise.  (I don't have 
enough of a variety of systems to do it any other way.)  So, I
have also posted this to the GCC list.

SO EVERYONE BE ADVISED:  I am removing the protection many headers
used to have against mis-fixes from fixincludes.  I will put them
back only if the fixincl program cannot be fixed itself.

Um, just to be clear:  mainline only, not 3.0 branch.

Cheers,
	Bruce

Re: HPUX 11 "size_t" fixinc problems

[John David Anglin]

> Excellent.  I applied this to the 3.0 branch before Friday's freeze.
> I intend to apply a slightly different one to the main line,
> barring complaints.  On the theory that all of the "empty replacement"
> fixes are really fixes for the broken fixincludes script, my
> _guess_ is that they are not needed any more because my version
> doesn't make mistakes.  ;-)

I have tested the following under hpux 11.00 and 11.11.  No fixes were
applied to any of the sys/ki*.h headers in either case.  So, I am happy
with the removal of the the AAA_ki* fixes on the main.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)


2001-12-17  John David Anglin  <dave@hiauly1.hia.nrc.ca>

        * inclhack.def (AAA_ki, AAA_ki_calls, AAA_ki_defs, AAA_ki_iface,
	AAA_time): Delete.
        (hpux_size_t): Revise select and fix for HP-UX 11.11.
        (hpux11_vsnprintf): Likewise.

--- inclhack.def.orig	Thu Dec  6 21:55:49 2001
+++ inclhack.def	Sun Dec 16 12:51:08 2001
@@ -39,50 +39,6 @@
 
 
 /*
- *  Purge some HP-UX 11 files that are only broken after they are "fixed".
- */
-fix = {
-    hackname = AAA_ki;
-    files    = sys/ki.h;
-    select   = '11.00 HP-UX LP64';
-    replace; /* empty replacement -> no fixing the file */
-};
-
-
-/*
- *  Purge some HP-UX 11 files that are only broken after they are "fixed".
- */
-fix = {
-    hackname = AAA_ki_calls;
-    files    = sys/ki_calls.h;
-    select   = 'kthread_create_caller_t';
-    replace; /* empty replacement -> no fixing the file */
-};
-
-
-/*
- *  Purge some HP-UX 11 files that are only broken after they are "fixed".
- */
-fix = {
-    hackname = AAA_ki_defs;
-    files    = sys/ki_defs.h;
-    select   = 'Kernel Instrumentation Definitions';
-    replace; /* empty replacement -> no fixing the file */
-};
-
-
-/*
- *  Purge some HP-UX 11 files that are only broken after they are "fixed".
- */
-fix = {
-    hackname = AAA_ki_iface;
-    files    = sys/ki_iface.h;
-    select   = 'These definitions are for HP Internal developers';
-    replace; /* empty replacement -> no fixing the file */
-};
-
-
-/*
  * Tru64 UNIX V4.0F/V5.1 <standards.h> defines _NO_PROTO and _NONSTD_TYPES
  * correctly for GCC, but strict_ansi_not breaks it.
  */
@@ -94,16 +50,6 @@
 };
 
 
-/*
- *  Purge some HP-UX 11 files that are only broken after they are "fixed".
- */
-fix = {
-    hackname = AAA_time;
-    files    = sys/time.h;
-    select   = '11.0 and later representation of ki time';
-    replace; /* empty replacement -> no fixing the file */
-};
-
 /* And now, the real fixes, replacement text fixes first: */
 
 /*
@@ -1222,12 +1168,11 @@
  */
 fix = {
     hackname  = hpux11_size_t;
-    mach      = "*-hp-hpux*";
-    select    = "^#define __size_t size_t";
+    mach      = "*-hp-hpux11*";
+    select    = "__size_t";
 
     c_fix     = format;
     c_fix_arg = "_hpux_size_t";
-    c_fix_arg = "__size_t";
 
     test_text =
     "#define __size_t size_t\n"
@@ -1264,17 +1209,17 @@
 
 
 /*
- *  Fix hpux 11.00 broken vsnprintf declaration
+ *  Fix hpux 11.00 broken vsnprintf declaration.
  */
 fix = {
     hackname = hpux11_vsnprintf;
     files    = stdio.h;
-    select   = 'extern int vsnprintf\(char \*, __size_t, const char \*,'
+    select   = 'extern int vsnprintf\(char \*, .*_size_t, const char \*,'
                                      ' __va__list\);';
 
     c_fix     = format;
-    c_fix_arg = "extern int vsnprintf(char *, __size_t, const char *,"
-                                     " __va_list);";
+    c_fix_arg = __va_list;
+    c_fix_arg = __va__list;
 
     test_text = 'extern int vsnprintf(char *, __size_t, const char *,'
                                      ' __va__list);';

Re: Unreviewed C++ patch for PA (HP assembler)

[John David Anglin]

> > 2001-12-03  Jason Merrill  <jason@redhat.com>
> > 
> > 	* rtti.c (create_pseudo_type_info): Set CLASSTYPE_INTERFACE_ONLY
> > 	on the __*_type_info type if we haven't seen a definition.
> 
> Yes, it does.  The libstdc++ test results with the HP assembler appear
> identical to that obtained with the GNU assembler.  I should have g++
> results in an hour or so.

The difference between the g++ testsuite results with the gnu and HP
assemblers is now much less than when I first looked at it a few months
ago.  There are now only two additional FAILs with the HP assembler:

Executing on host: /xxx/gnu/gcc-3.1/objdir/gcc/testsuite/../g++ -B/xxx/gnu/gcc-3.1/objdir/gcc/testsuite/../  -nostdinc++ -I/xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11/libstdc++-v3/include/hppa2.0w-hp-hpux11.11 -I/xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11/libstdc++-v3/include -I/xxx/gnu/gcc-3.1/libstdc++-v3/libsupc++ -I/xxx/gnu/gcc-3.1/libstdc++-v3/libio -I/xxx/gnu/gcc-3.1/libstdc++-v3/include/backward -I/xxx/gnu/gcc-3.1/libstdc++-v3/testsuite -fmessage-length=0  -ansi -pedantic-errors -Wno-long-long  -c  -o /xxx/gnu/gcc-3.1/objdir/gcc/testsuite/union1.o /xxx/gnu/gcc-3.1/gcc/testsuite/g++.old-deja/g++.brendan/union1.C    (timeout = 300)
as: error 7403: undefined label - _ZZ4hashdE5asint (7403)
compiler exited with status 1
output is:
as: error 7403: undefined label - _ZZ4hashdE5asint (7403)

Executing on host: /xxx/gnu/gcc-3.1/objdir/gcc/testsuite/../g++ -B/xxx/gnu/gcc-3.1/objdir/gcc/testsuite/../ /xxx/gnu/gcc-3.1/gcc/testsuite/g++.old-deja/g++.jason/template31.C  -nostdinc++ -I/xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11/libstdc++-v3/include/hppa2.0w-hp-hpux11.11 -I/xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11/libstdc++-v3/include -I/xxx/gnu/gcc-3.1/libstdc++-v3/libsupc++ -I/xxx/gnu/gcc-3.1/libstdc++-v3/libio -I/xxx/gnu/gcc-3.1/libstdc++-v3/include/backward -I/xxx/gnu/gcc-3.1/libstdc++-v3/testsuite -fmessage-length=0  -ansi -pedantic-errors -Wno-long-long    -L/xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs -L/xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libiberty  -lstdc++ -lm   -o /xxx/gnu/gcc-3.1/objdir/gcc/testsuite/g++-jason-template31-C.exe    (timeout = 300)
/usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::__malloc_alloc_oom_handler" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
/usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::_S_oom_malloc(unsigned long)" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
/usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::_S_oom_realloc(void*, unsigned long)" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
/usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::allocate(unsigned long)" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
/usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::deallocate(void*, unsigned long)" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
/usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::reallocate(void*, unsigned long, unsigned long)" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
/usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::__set_malloc_handler(void (*)())" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
/usr/ccs/bin/ld: Found 7 duplicate symbol(s)
collect2: ld returned 1 exit status

Possibly, the smaller difference is because libtool didn't think it
could build shared libraries on the test system:

checking if libtool supports shared libraries... no
checking whether to build shared libraries... no

I'll have to figure out why libtool didn't build a shared libstdc++.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Unreviewed C++ patch for PA (HP assembler)

[Benjamin Kosnik]

John can you try this please?

2001-12-03  Benjamin Kosnik  <bkoz@redhat.com>

	* src/string-inst.cc: Add static data member instantiations.
Index: src/string-inst.cc
===================================================================
RCS file: /cvs/gcc/gcc/libstdc++-v3/src/string-inst.cc,v
retrieving revision 1.19
diff -c -p -r1.19 string-inst.cc
*** string-inst.cc      2001/10/31 08:27:20     1.19
--- string-inst.cc      2001/12/03 22:48:06
*************** namespace std 
*** 46,51 ****
--- 46,52 ----
    typedef basic_string<C> S;
  
    template class basic_string<C>;
+   template const C S::_Rep::_S_terminal;
    template S::size_type S::_Rep::_S_max_size;
  
    template S operator+(const C*, const S&)

Re: Unreviewed C++ patch for PA (HP assembler)

[Jason Merrill]

>>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

> The difference between the g++ testsuite results with the gnu and HP
> assemblers is now much less than when I first looked at it a few months
> ago.  There are now only two additional FAILs with the HP assembler:

> g++.brendan/union1.C
> as: error 7403: undefined label - _ZZ4hashdE5asint (7403)

Hmm, this is a target-independent bug that is only caught on the PA because
of assembler pedanticism.  I'll make the test linkable so the failure shows
up on other targets, too.

> g++.jason/template31.C
> /usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::__malloc_alloc_oom_handler" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)

Try removing the explicit instantiations from the testcase.

Jason

Re: Unreviewed C++ patch for PA (HP assembler)

[John David Anglin]

> > g++.jason/template31.C
> > /usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::__malloc_alloc_oom_handler" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
> 
> Try removing the explicit instantiations from the testcase.

That does the trick.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-12-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* g++.old-deja/g++.jason/template31.C: Remove template for class
	std::__malloc_alloc_template<0>.

--- template31.C.orig	Wed Jul 25 08:06:20 2001
+++ template31.C	Tue Dec  4 12:03:43 2001
@@ -37,7 +37,6 @@
     std::exit(0);
 }
 
-template class std::__malloc_alloc_template<0>;
 #ifndef __USE_MALLOC
 template class std::__default_alloc_template<false, 0>;
 #endif

Re: Unreviewed C++ patch for PA (HP assembler)

[John David Anglin]

> > g++.jason/template31.C
> > /usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::__malloc_alloc_oom_handler" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
> 
> Try removing the explicit instantiations from the testcase.

Is this revision OK for the main?  It fixes the problem on hppa2.0w-hp-hpux11.11
with the HP assembler.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2001-12-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* g++.old-deja/g++.jason/template31.C: Remove template for class
	std::__malloc_alloc_template<0>.

--- template31.C.orig	Wed Jul 25 08:06:20 2001
+++ template31.C	Tue Dec  4 12:03:43 2001
@@ -37,7 +37,6 @@
     std::exit(0);
 }
 
-template class std::__malloc_alloc_template<0>;
 #ifndef __USE_MALLOC
 template class std::__default_alloc_template<false, 0>;
 #endif

Re: Unreviewed C++ patch for PA (HP assembler)

[Jason Merrill]

>>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

> -template class std::__malloc_alloc_template<0>;
>  #ifndef __USE_MALLOC
>  template class std::__default_alloc_template<false, 0>;
>  #endif

I'd remove the other explicit instantiation, too.  If that doesn't break
things for you, go ahead and check it in on the trunk.

Jason

Re: Unreviewed C++ patch for PA (HP assembler)

[Phil Edwards]

On Sat, Dec 08, 2001 at 12:28:02PM -0500, John David Anglin wrote:
> > > g++.jason/template31.C
> > > /usr/ccs/bin/ld: Duplicate symbol "std::__malloc_alloc_template<0>::__malloc_alloc_oom_handler" in files /var/tmp//cc8IHMur.o and /xxx/gnu/gcc-3.1/objdir/hppa2.0w-hp-hpux11.11//libstdc++-v3/src/.libs/libstdc++.a(stl-inst.o)
> > 
> > Try removing the explicit instantiations from the testcase.
> 
> Is this revision OK for the main?  It fixes the problem on hppa2.0w-hp-hpux11.11
> with the HP assembler.

This should be okay; we need to be testing library instantiations in the
library testsuite anyhow, rather than in the compiler testsuite.  (I have
a larval-stage testcase for allocators, but we need to finish deciding
what to do with allocator design first, before any of it will be of use.)

Jason or Mark will need to approve the change.


Phil

-- 
If ye love wealth greater than liberty, the tranquility of servitude greater
than the animating contest for freedom, go home and leave us in peace.  We seek
not your counsel, nor your arms.  Crouch down and lick the hand that feeds you;
and may posterity forget that ye were our countrymen.            - Samuel Adams

Re: PATCH: Check all insns in fallthru to see if label is mentioned

[John David Anglin]

> There might be two regressions:
> 
> FAIL: gcc.c-torture/execute/strct-pack-1.c execution,  -O2
> FAIL: gcc.c-torture/execute/strct-pack-1.c execution,  -Os
> 
> These started failing in execution at some point after Dec. 1.  It will
> be a few days before I can examine these in more detail.

It is my guess that these failures are due to the "enhanced structure
offset tracking" patch.

In the -O2 assembler output, we have

        ldi 1,%r20
        .stabn 68,0,20,L$M7-main
	L$M7:
	ldw -120(%r30),%r21
	<manipulation of r21 deleted>
        sth %r20,-120(%r30)
	.stabn 68,0,20,L$M11-main
	L$M11:
	stw %r22,-112(%r30)
	stw %r21,-120(%r30)

The halfword store of r20 gets moved downward, after the load of r21.
This occurs in the ce2 pass.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: fix aix -fcprop-register miscompilation

[John David Anglin]

> > 	* regrename.c (copy_value): Ignore overlapping copies.
> 
> This seems to fix 950704-1.c at -O1.  I will have the complete test results

Bootstrapped and checked.  Test results with the above patch are identical
to those from yesterday.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: more portable way to fix g77.f-torture/execute/io1.f (was Re: [PATCH] alias.c find_base_value fix)

[John David Anglin]

> No, I don't think this is it.  I have looked at the preprocessed output
> from backspace.c.  There isn't a prototype at all for fseeko in the
> output.  This appears to be because _LARGEFILE_SOURCE is not defined.

I added a define for _LARGEFILE_SOURCE in libI77/config.h.  Rebuilding
the library and rerunning the g77 testsuite, I find that this fixes the
io0.f, io1.f and u77-test.f FAILS.  This only leaves the FAIL of
20001201.f on hppa2.0w-hp-hpux11.11.

Toon, do you want me to try and fix configure to provide this define
when necessary?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: more portable way to fix g77.f-torture/execute/io1.f (was Re: [PATCH] alias.c find_base_value fix)

[John David Anglin]

> > No, I don't think this is it.  I have looked at the preprocessed output
> > from backspace.c.  There isn't a prototype at all for fseeko in the
> > output.  This appears to be because _LARGEFILE_SOURCE is not defined.
> 
> I added a define for _LARGEFILE_SOURCE in libI77/config.h.  Rebuilding
> the library and rerunning the g77 testsuite, I find that this fixes the
> io0.f, io1.f and u77-test.f FAILS.  This only leaves the FAIL of
> 20001201.f on hppa2.0w-hp-hpux11.11.

Here is a patch.  Fixes the above with no regressions.  Toon would
you apply if ok so that configure and config.in are rebuilt with your
favorite versions of autoconf and autoheader?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-01-10  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* libI77/configure.in (_LARGEFILE_SOURCE): AC_DEFINE.
	* libI77/configure: Rebuilt.
	* libI77/config.h.in: Rebuilt.

--- libI77/configure.in.orig	Sun Sep 30 18:06:22 2001
+++ libI77/configure.in	Thu Jan 10 14:40:28 2002
@@ -31,6 +31,7 @@
 # The following is needed by Solaris2.5.1 so that struct timeval is declared.
 AC_DEFINE(__EXTENSIONS__, 1, [Solaris extensions])
 AC_DEFINE(_FILE_OFFSET_BITS, 64, [Get 64-bit file size support])
+AC_DEFINE(_LARGEFILE_SOURCE, 1, [Define for HP-UX ftello and fseeko extension.])
 
 dnl Checks for programs.
 

Re: PATCH: more portable way to fix g77.f-torture/execute/io1.f (was Re: [PATCH] alias.c find_base_value fix)

[Toon Moene]

John David Anglin wrote:

> Here is a patch.  Fixes the above with no regressions.  Toon would
> you apply if ok so that configure and config.in are rebuilt with your
> favorite versions of autoconf and autoheader?

> 2002-01-10  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
>         * libI77/configure.in (_LARGEFILE_SOURCE): AC_DEFINE.
>         * libI77/configure: Rebuilt.
>         * libI77/config.h.in: Rebuilt.

Applied with the obvious date change to the ChangeLog.  Make bootstrap
(C and Fortran only), checked (Fortran only) and installed on
i686-pc-linux-gnu (Debian GNU/Linux 2.2).

Sorry for the delay - I was away from home for the USENIX/FREENIX 2002
program committee meeting in Durham last week.

Thanks !

-- 
Toon Moene - mailto:toon@moene.indiv.nluug.nl - phoneto: +31 346 214290
Saturnushof 14, 3738 XG  Maartensdijk, The Netherlands
Maintainer, GNU Fortran 77: http://gcc.gnu.org/onlinedocs/g77_news.html
Join GNU Fortran 95: http://g95.sourceforge.net/ (under construction)

PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[John David Anglin]

> The ICE occurs in verify_flow_info when it encounters a barrier.  It appears
> that case insn's are being incorrectly simplified in the cse2 pass.  This
> is the rtl from loop:

The ICE occurs because the original conditional jump gets converted to
an unconditional jump and a barrier is added after the jump.  However,
the jump table data still remains in the rtl for the block.  This
confuses the edge analysis into thinking that the block falls thru
and we have an inconsistent configuration.

This patch fixes the problem by deleting the jump table data when a
conditional or computed jump is converted to an unconditional jump.
I have verified that the patch fixes the original problem observed
under vax-dec-ultrix4.3.  A new vax bootstrap is underway but it
won't finish until sometime next month.

Bootstrap checked with no regressions on i686-pc-linux-gnu and
hppa2.0w-hp-hpux11.11.

OK to install?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-01-14  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* cse.c (cse_insn): Delete jump table data when a conditional or
	computed jump is converted to an unconditional jump.

--- cse.c.orig	Mon Jan 14 12:24:57 2002
+++ cse.c	Mon Jan 14 17:48:32 2002
@@ -5767,9 +5767,19 @@
 	 be a conditional or computed branch.  */
       else if (dest == pc_rtx && GET_CODE (src) == LABEL_REF)
 	{
-	  /* Now emit a BARRIER after the unconditional jump.  */
-	  if (NEXT_INSN (insn) == 0
-	      || GET_CODE (NEXT_INSN (insn)) != BARRIER)
+	  rtx next = NEXT_INSN (insn);
+	  rtx tmp;
+
+	  /* Delete jump table data if present.  */
+	  if (next != NULL_RTX
+	      && LABEL_P (next)
+	      && (tmp = NEXT_INSN (next)) != NULL_RTX
+	      && JUMP_TABLE_DATA_P (tmp))
+	    delete_insn (tmp);
+
+	  /*  Now emit a BARRIER after the unconditional jump.  */
+	  if (next == NULL_RTX
+	      || GET_CODE (next) != BARRIER)
 	    emit_barrier_after (insn);
 
 	  /* We reemit the jump in as many cases as possible just in

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[Richard Henderson]

On Tue, Jan 15, 2002 at 06:16:14PM -0500, John David Anglin wrote:
> This patch fixes the problem by deleting the jump table data when a
> conditional or computed jump is converted to an unconditional jump.
> I have verified that the patch fixes the original problem observed
> under vax-dec-ultrix4.3.  A new vax bootstrap is underway but it
> won't finish until sometime next month.

This is extremely delicate.  It is not uncommon for there to 
be references remaining to the jump table that won't be deleted
until later dead code elimination.

I'm therefore uncomfortable with simply removing it like this.
I'm not sure what to suggest as an alternative though...


r~

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[John David Anglin]

> On Tue, Jan 15, 2002 at 06:16:14PM -0500, John David Anglin wrote:
> > This patch fixes the problem by deleting the jump table data when a
> > conditional or computed jump is converted to an unconditional jump.
> > I have verified that the patch fixes the original problem observed
> > under vax-dec-ultrix4.3.  A new vax bootstrap is underway but it
> > won't finish until sometime next month.
> 
> This is extremely delicate.  It is not uncommon for there to 
> be references remaining to the jump table that won't be deleted
> until later dead code elimination.
> 
> I'm therefore uncomfortable with simply removing it like this.
> I'm not sure what to suggest as an alternative though...

I suspect the problem is specific to the VAX.  The VAX is the only
port that defines CASE_DROPS_THROUGH.  When the VAX casesi jump is
folded, the PC's value in the casesi insn is replaced by a LABEL_REF
pointing to the CODE_LABEL before the jump table which unfortunately
is in the current block.  Then, at a later point, the barrier is added
in cse_insn creating the invalid configuration.

I tried moving delete_trivially_dead_insns up before cleanup_cfg in
toplev.c but that didn't remove the jump table.  I tried removing the
jump insn.  That failed at a different point in verify_flow_info.
It might be possible to make that approach work but I suspect that
you would have the same misgivings.

I could wrap the code to delete the jump table in an #ifdef
CASE_DROPS_THROUGH if that would make you more comfortable.

The other options that I can see are: changing verify_flow_info
to allow the barrier in this situation if CASE_DROPS_THROUGH,
or not emitting the barrier in cse_main.

As an aside, I noticed that gcc can't simplify a switch statement
when its expression evaluates to a value in the range of the switch.
This is because a MEM is used to access the jump table.  Probably
not a big deal, but the HP compiler can do it.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[John David Anglin]

> On Tue, Jan 15, 2002 at 06:16:14PM -0500, John David Anglin wrote:
> > This patch fixes the problem by deleting the jump table data when a
> > conditional or computed jump is converted to an unconditional jump.
> > I have verified that the patch fixes the original problem observed
> > under vax-dec-ultrix4.3.  A new vax bootstrap is underway but it
> > won't finish until sometime next month.
> 
> This is extremely delicate.  It is not uncommon for there to 
> be references remaining to the jump table that won't be deleted
> until later dead code elimination.
> 
> I'm therefore uncomfortable with simply removing it like this.
> I'm not sure what to suggest as an alternative though...

Does this look better?  The patch no longer removes the jump table.
It simply changes the branch destination to a new label following
the jump table when it detects that the target of the jump is the
following insn.  The subsequent flow analysis deletes the unused jump
table.  This should only happen on the vax.

Tested on vax-dec-ultrix4.3 and various PA builds for the last month.

OK?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-01-16	John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* cse.c (cse_insn): Fix the destination of unconditional jumps to an
	immediately following code label, followed by jump table data.

--- cse.c.orig	Wed Jan 16 12:28:28 2002
+++ cse.c	Wed Jan 16 16:50:26 2002
@@ -5767,9 +5767,30 @@
 	 be a conditional or computed branch.  */
       else if (dest == pc_rtx && GET_CODE (src) == LABEL_REF)
 	{
-	  /* Now emit a BARRIER after the unconditional jump.  */
-	  if (NEXT_INSN (insn) == 0
-	      || GET_CODE (NEXT_INSN (insn)) != BARRIER)
+	  rtx next = NEXT_INSN (insn);
+	  rtx tmp;
+
+	  /* If there is jump table data after the jump and its destination
+	     is now the code label preceding the jump table, change the
+	     destination to a new label after the jump table.  This kludge
+	     is needed on the VAX because fold_rtx uses the label before
+	     the jump table in folding a case insn.  */
+	  if (next != NULL_RTX
+	      && LABEL_P (next)
+	      && (tmp = NEXT_INSN (next)) != NULL_RTX
+	      && JUMP_TABLE_DATA_P (tmp)
+	      && XEXP (src, 0) == next)
+	    {
+	      rtx label = gen_label_rtx ();
+	      emit_label_after (label, tmp);
+	      XEXP (src, 0) = label;
+	      --LABEL_NUSES (next);
+	      ++LABEL_NUSES (label);
+	    }
+
+	  /*  Now emit a BARRIER after the unconditional jump.  */
+	  if (next == NULL_RTX
+	      || GET_CODE (next) != BARRIER)
 	    emit_barrier_after (insn);
 
 	  /* We reemit the jump in as many cases as possible just in

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[Richard Henderson]

On Mon, Feb 04, 2002 at 06:37:13PM -0500, John David Anglin wrote:
> Does this look better?  The patch no longer removes the jump table...

Grr.  Jeff, we need a decision on how we're going to handle
this across the board.


r~

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[law]

In message <20020204161620.B19052@redhat.com>, Richard Henderson writes:
 > On Mon, Feb 04, 2002 at 06:37:13PM -0500, John David Anglin wrote:
 > > Does this look better?  The patch no longer removes the jump table...
 > 
 > Grr.  Jeff, we need a decision on how we're going to handle
 > this across the board.
Agreed.  As I mentioned, I'm extremely tempted to burn tonight and
get rid of having a separate insn for the ADDR_VEC/ADDR_DIFF_VEC.

Thoughts?
jeff

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[Richard Henderson]

On Mon, Feb 04, 2002 at 05:35:52PM -0700, law@redhat.com wrote:
> Agreed.  As I mentioned, I'm extremely tempted to burn tonight and
> get rid of having a separate insn for the ADDR_VEC/ADDR_DIFF_VEC.
> 
> Thoughts?

If you can make it work, I'm all for it.

BTW, another edge case you should consider in doing this is
s390, which dumps the tablejump label into the constant pool.
I don't think there's an integrated sim for that one, but 
perhaps faking it via "ln -s /bin/true s390-linux-run" and
checking that the execute tests compile is a good enough 
sanity check.


r~

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[law]

 In message <20020204164731.A19099@redhat.com>, Richard Henderson writes:
 > On Mon, Feb 04, 2002 at 05:35:52PM -0700, law@redhat.com wrote:
 > > Agreed.  As I mentioned, I'm extremely tempted to burn tonight and
 > > get rid of having a separate insn for the ADDR_VEC/ADDR_DIFF_VEC.
 > > 
 > > Thoughts?
 > 
 > If you can make it work, I'm all for it.
The only thing that makes it even a mildly interesting problem is the ports
that want to use the label before the tablejump for computations.

Attaching the jump table to the tablejump isn't all that difficult, but we
still have the fun and exciting job of dealing with that peksy code label --
with the downside that without the separate ADDR_VEC/ADDR_DIFF_VEC, it's
less clear that the label is "special".

What we could do in the short term is to delete the jump table when we
optimize the jump, but leave the CODE_LABEL alone.   That deals with the
immediate problem of needing to get unused jump tables out of the insn
stream.  By leaving the CODE_LABEL in the stream we avoid dangling
references in normal insns which used that label for computations.

I believe John's patch as well as mine could be easily adapted to such
a scheme.

--

Looking into the future, we need some way to have those pesky computation
insns reference a widget which is attached (along with the jump table) to
the tablejump insn.  [ The widget is a magic code label, of course. ]

By having all 3 key items (tablejump, jump table and magic code label) in a
single insn we avoid all the mess of knowing that magic items follow table
jumps which must be kept in specific orders, and we avoid having random crud
existing between basic blocks.

When doing final assembly output, we would first emit the jump, then emit
the magic label (if any), then the jump table (if any).


When we optimize a tablejump into a simple jump, we zero out the attached jump
table and emit the magic label into the insn stream as a normal CODE_LABEL (at
which point it behaves like any CODE_LABEL which is not referenced by a jumping
insn).

 > BTW, another edge case you should consider in doing this is
 > s390, which dumps the tablejump label into the constant pool.
 > I don't think there's an integrated sim for that one, but 
 > perhaps faking it via "ln -s /bin/true s390-linux-run" and
 > checking that the execute tests compile is a good enough 
 > sanity check.
I think we'd want to largely treat the s390 like the other ports; with the
caveat that we dump the table into the constant pool relatively late in
the compilation process.    ie, I'd like to present the optimizers with
a common model for dealing with tablejumps.

Thoughts?

jeff

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on

[John David Anglin]

> What we could do in the short term is to delete the jump table when we
> optimize the jump, but leave the CODE_LABEL alone.   That deals with the
> immediate problem of needing to get unused jump tables out of the insn
> stream.  By leaving the CODE_LABEL in the stream we avoid dangling
> references in normal insns which used that label for computations.

That's what my first patch did.  However, Honza pointed out that it
is valid for a case pattern to appear to use the jump table but in
fact do an indirect branch using a pointer.  If you kill the jump
table, then you need to kill the jumps first and they are difficult
to locate.  However, this does not apply to the VAX and I believe
the jump table can be safely deleted.

My current proposal essentially creates for the VAX the same situation
as we currently have on the PA (ie., the jump table remains around
until removed by dead code analysis).  Obviously, not as nice as
your suggestion below but it seems to work.

The situations where a switch gets folded are relatively rare.  Loop
unrolling is where I first noted the problem.  Thus, unless you are
aware of other bugs affected by this problem, I would defer a better
fix until after 3.1 branches.

The current patch only affects the VAX because it is the only port
that defines CASE_DROPS_THROUGH, and thereby the only port where the
case insn is folded to a jump directed to the label before the jump table.
Thus, I don't believe patch will affect any other port.

> Looking into the future, we need some way to have those pesky computation
> insns reference a widget which is attached (along with the jump table) to
> the tablejump insn.  [ The widget is a magic code label, of course. ]
> 
> By having all 3 key items (tablejump, jump table and magic code label) in a
> single insn we avoid all the mess of knowing that magic items follow table
> jumps which must be kept in specific orders, and we avoid having random crud
> existing between basic blocks.

Sounds wonderful.  In thinking about this, it became clear that separating
these components was just asking for trouble.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on

[law]

In message <200202050510.g155AIxr021739@hiauly1.hia.nrc.ca>, "John David Anglin
" writes:
 > That's what my first patch did.  However, Honza pointed out that it
 > is valid for a case pattern to appear to use the jump table but in
 > fact do an indirect branch using a pointer.  If you kill the jump
 > table, then you need to kill the jumps first and they are difficult
 > to locate.  However, this does not apply to the VAX and I believe
 > the jump table can be safely deleted.
It seems to me that we do in fact kill the jumps first in cse.c and
cfgrtl.c, so I'm not sure I understand Honza's objection.

In fact, what I'm proposing is the set of actions to perform when we
transform any jump which uses a jump table into a simple jump -- regardless
of whether or not the jump is implemented as casesi, tablejump or a special
indirect jump.

The cases where my proposed rules can all be identified by the following code
(assuming INSN is the original jump):

  if ((tmp = JUMP_LABEL (insn)) != NULL_RTX
      && (tmp = NEXT_INSN (tmp)) != NULL_RTX
      && GET_CODE (tmp) == JUMP_INSN
      && (GET_CODE (PATTERN (tmp)) == ADDR_VEC
          || GET_CODE (PATTERN (tmp)) == ADDR_DIFF_VEC))


Furthermore, other insns don't reference the jump table -- they reference
the CODE_LABEL before the jump table.  That's the whole point behind leaving
the CODE_LABEL in the insn stream.  So I have a real hard time seeing why
it is unsafe to remove the jump table at the same time we convert its 
associated tablejump/casesi into a simple jump.

Maybe I'm just being dense.  


 > My current proposal essentially creates for the VAX the same situation
 > as we currently have on the PA (ie., the jump table remains around
 > until removed by dead code analysis).  Obviously, not as nice as
 > your suggestion below but it seems to work.
It'll break.  It's just a matter of getting into the right parts of
the compiler.  The most problematical areas are going to the hunks of code
that iterate over the insn stream without regards for basic block boundaries.

We've already run into cases where these unattached jump tables have caused
such code to core dump.  See:

  http://gcc.gnu.org/ml/gcc/2001-11/msg01355.html


While I marginally agree with the change that was installed -- it's safe, but
it needlessly caused the loop optimizer to give up on a loop -- all because
it had an unused jump table lying around in the middle of it.

It turns out that code was relatively easy to fix, but I have little
confidence that the rest of our compiler is ready to deal with a random,
unattached jump table, or with a jump table which references deleted
labels.

Before we switched to rely heavily on the cfg simplifier such cases were
caught and fixed by running the jump optimizer after any pass which might
have modified a jump.  One of the first things the jump optimizer did was
remove code between a BARRIER and the next CODE_LABEL.  That had the effect
of removing these unattached jump tables from the insn stream before the
other optimizers had the chance to trip over them.


 > The situations where a switch gets folded are relatively rare.
I agree.  However the amount of code that is prepared to deal with this
situation is rather vast -- particularly when you consider how we relied
upon the old jump optimizer to always clean up this turd before we moved
into the next optimization pass.

 > Loop
 > unrolling is where I first noted the problem.  Thus, unless you are
 > aware of other bugs affected by this problem, I would defer a better
 > fix until after 3.1 branches.
I ran into it just trying to bootstrap the compiler. :(

 > The current patch only affects the VAX because it is the only port
 > that defines CASE_DROPS_THROUGH, and thereby the only port where the
 > case insn is folded to a jump directed to the label before the jump table.
 > Thus, I don't believe patch will affect any other port.
True, but the underlying issue (unattached jump tables in the stream) affects
more than just the VAX.

 > > By having all 3 key items (tablejump, jump table and magic code label) in 
 > a
 > > single insn we avoid all the mess of knowing that magic items follow table
 > > jumps which must be kept in specific orders, and we avoid having random cr
 > ud
 > > existing between basic blocks.
 > 
 > Sounds wonderful.  In thinking about this, it became clear that separating
 > these components was just asking for trouble.
Agreed.  
jeff

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on

[Jan Hubicka]

> Furthermore, other insns don't reference the jump table -- they reference
> the CODE_LABEL before the jump table.  That's the whole point behind leaving
> the CODE_LABEL in the insn stream.  So I have a real hard time seeing why
> it is unsafe to remove the jump table at the same time we convert its 
> associated tablejump/casesi into a simple jump.

Because the label before jumptable is special by the fact that it is not
in code segment for most cases.  By removing the following jumptable you
convert special code_label to not special code_label and create invalid
CFG. Sick, I know. 

You must remove it and convert to NOTE_DELETED_LABEL as code labels other than
tablejump are prohibited outside basic block.  In case we keep the instructions
to compute address in the stream by the accident, we result in accesing code
segment for no putpose.

> Before we switched to rely heavily on the cfg simplifier such cases were
> caught and fixed by running the jump optimizer after any pass which might

This is not correct - it is easy to construct testcases where the jumptable
has been left in the stream with the old jump optimizer.
THey has been removed just in "majority of cases".

Honza

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on

[law]

 In message <20020205124632.GS17128@atrey.karlin.mff.cuni.cz>, Jan Hubicka 
write
s:
 > Because the label before jumptable is special by the fact that it is not
 > in code segment for most cases.  By removing the following jumptable you
 > convert special code_label to not special code_label and create invalid
 > CFG. Sick, I know.
No, it doesn't create an invalid CFG if it does, then the CFG was broken to
begin with.

Let's look at the cases.

First, let's assume we don't optimize the tablejump at all.  By convention the
magic label as well as the jump table are defined as being outside any defined
basic blocks.  ie, they exist between basic blocks, much like barriers.

Now let's assume we have an optimizable tablejump and we remove the jump
table, twiddle the tablejump, but leave the magic code label alone.

  The vast majority of the time twiddling the tablejump will either directly
  or indirectly (via dead code elimination) cause all the references to the
  magic code label to be removed.  Once the last reference has been removed,
  the code label itself gets removed.  Clearly if it's not in the stream,
  then it's not going to cause a problem.

  However, there is a period of time where the label is in the stream, but
  this should not cause significant problems.  If you look at the insns we
  will be left with after transforming the tablejump and removing the
  jump table we'll have something like this:

    simplejump

    barrier

    magic code label

    [ Optional barrier, which I believe we want to eliminate if it's still
      in the stream. ]

    normal code label for whatever real code followed the jump table



  We effectively have consecutive labels, which can and should be
  combined.  Even if they are not combined, what we have is a label which
  is not the target of a branch, but which is referenced by computation
  insns.  Such labels have well defined semantics, both in terms of how
  the CFG is constructed (they have no effect) and in terms of how they
  can move around in the insn stream.


 > You must remove it and convert to NOTE_DELETED_LABEL as code labels other
 > than tablejump are prohibited outside basic block.  In case we keep the
 > instructions to compute address in the stream by the accident, we result
 > in accesing code segment for no putpose.
I don't think this is necessary.  Though if it would make you feel better,
we can convert the label into a NOTE_DELETED_LABEL.

99.9% of the time the computation insns are going to be deleted by dead
code elimination.  That 0.1% of the time all they'll do is compute an 
address that will never be used, just like if we take the address of a
label using GCC's address-of-a-label extension.

 > This is not correct - it is easy to construct testcases where the jumptable
 > has been left in the stream with the old jump optimizer.
 > THey has been removed just in "majority of cases".
Sorry, based on my knowledge of how jump.c works I don't believe you.  I'd
like to see an example of when the old jump optimizer would leave an 
jump table in the stream.

jeff

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on

[Jan Hubicka]

>   We effectively have consecutive labels, which can and should be
>   combined.  Even if they are not combined, what we have is a label which

This is the problem. We do have CODE_LABEL outside basic block.
Our definition of CFG is that CODE_LABELs (except for magical ones)
appears in the head of basic block. There can not be multiple labels
in single basic block and there can not be labels outside basic blocks.

Combining labels is handled by creating empty basic block and elliminating
them subsequently.

We are targetting to situation where there is nothing outside basic block,
as sane ILs should have. That means eliminating of jumptables and majority
of INSN_NOTES so we are relativly far from that goal. I am working on
the INSN_NOTES slowly anyway.

>   is not the target of a branch, but which is referenced by computation
>   insns.  Such labels have well defined semantics, both in terms of how
>   the CFG is constructed (they have no effect) and in terms of how they
>   can move around in the insn stream.
> 
> 
>  > You must remove it and convert to NOTE_DELETED_LABEL as code labels other
>  > than tablejump are prohibited outside basic block.  In case we keep the
>  > instructions to compute address in the stream by the accident, we result
>  > in accesing code segment for no putpose.
> I don't think this is necessary.  Though if it would make you feel better,
> we can convert the label into a NOTE_DELETED_LABEL.

Yes, otherwise verify_flow_info will abort, at least.
You got that right in your patch by using delete_insn_chain that cares
converison to DELETED_LABEL thats why it worked for you.
> 
> 99.9% of the time the computation insns are going to be deleted by dead
> code elimination.  That 0.1% of the time all they'll do is compute an 
> address that will never be used, just like if we take the address of a

It will be used - we will read from it and throw away the value.
The actual read from code segment may be problem, so we need to ensure that
we eliminate the insns in 100%. ALso some ports allow different MEM expresisons
to code segment and to data segment and they actually do test CODE_LABEL
to magickness so we may result in invalid insn.

I believe that this is easy to do - just lets prohibit simplification of
jumptables after reload so flow will always do the action.

> label using GCC's address-of-a-label extension.
> 
>  > This is not correct - it is easy to construct testcases where the jumptable
>  > has been left in the stream with the old jump optimizer.
>  > THey has been removed just in "majority of cases".
> Sorry, based on my knowledge of how jump.c works I don't believe you.  I'd
> like to see an example of when the old jump optimizer would leave an 
> jump table in the stream.

One of testcases has been invariant jumptable in the loop. THe compuation
has been then moved outside loop and jump lost track when killing
the dead code.

Honza
> 
> jeff
> 

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on

[Jan Hubicka]

> > Looking into the future, we need some way to have those pesky computation
> > insns reference a widget which is attached (along with the jump table) to
> > the tablejump insn.  [ The widget is a magic code label, of course. ]
> > 
> > By having all 3 key items (tablejump, jump table and magic code label) in a
> > single insn we avoid all the mess of knowing that magic items follow table
> > jumps which must be kept in specific orders, and we avoid having random crud
> > existing between basic blocks.
> 
> Sounds wonderful.  In thinking about this, it became clear that separating
> these components was just asking for trouble.

As mentioned in the other thread, I've tested the idea on cfg branch by
just removing the jumptables+labels from insn stream after it is constructed
and re-emitting them before final and it worked just fine for i386/mips
w/o modification of config directory.

Honza
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[Richard Henderson]

On Mon, Feb 04, 2002 at 08:29:58PM -0700, law@redhat.com wrote:
> What we could do in the short term is to delete the jump table when we
> optimize the jump, but leave the CODE_LABEL alone.   That deals with the
> immediate problem of needing to get unused jump tables out of the insn
> stream.  By leaving the CODE_LABEL in the stream we avoid dangling
> references in normal insns which used that label for computations.

If we're going to dream, I think using CODE_LABEL at all for this
is incorrect.  Except for a couple of oddballs it isn't a label to 
code at all -- it's a label to .rodata.  And for those Harvard ports
that have different representations for code and data pointers, 
having both use a LABEL_REF causes problems.

So we should have a TABLEJUMP_REF that references the jump table,
and if for some reason the jump table gets optimized away without
optimizing out the references, we can emit a zero instead.

Or simply have a pass just before final that removes such refs.

> I think we'd want to largely treat the s390 like the other ports; with the
> caveat that we dump the table into the constant pool relatively late in
> the compilation process.    ie, I'd like to present the optimizers with
> a common model for dealing with tablejumps.

It doesn't seem unreasonable to treat the entire table jump as a
unit during early optimization.  You'd want to lower early enough 
to move address computation out of loops when possible, but otherwise
there's little that can actually be simplified wrt other code.


r~

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[law]

 In message <20020204215518.A19374@redhat.com>, Richard Henderson writes:
 > If we're going to dream, I think using CODE_LABEL at all for this
 > is incorrect.  Except for a couple of oddballs it isn't a label to 
 > code at all -- it's a label to .rodata.  And for those Harvard ports
 > that have different representations for code and data pointers, 
 > having both use a LABEL_REF causes problems.
I agree completely.  In fact, the lame notion that it was a CODE_LABEL
caused me more frustration than I care to remember when I was playing
with rewriting the jump table support for the PA a few years ago.


 > So we should have a TABLEJUMP_REF that references the jump table,
 > and if for some reason the jump table gets optimized away without
 > optimizing out the references, we can emit a zero instead.
Sure.  I've got no problem with this.


 > It doesn't seem unreasonable to treat the entire table jump as a
 > unit during early optimization.  You'd want to lower early enough 
 > to move address computation out of loops when possible, but otherwise
 > there's little that can actually be simplified wrt other code.
It seems to me the address computation can be broken out without breaking
up the jump, table & TABLEJUMP_REF into their separate components.  We would
just expand

(set (reg) (TABLEJUMP_REF x))

Into whatever components the target needs.   It seems we can do that, but
still keep the rest of the stuff as a unit until final assembly output.

jeff

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[Jan Hubicka]

> On Mon, Feb 04, 2002 at 08:29:58PM -0700, law@redhat.com wrote:
> > What we could do in the short term is to delete the jump table when we
> > optimize the jump, but leave the CODE_LABEL alone.   That deals with the
> > immediate problem of needing to get unused jump tables out of the insn
> > stream.  By leaving the CODE_LABEL in the stream we avoid dangling
> > references in normal insns which used that label for computations.
> 
> If we're going to dream, I think using CODE_LABEL at all for this
> is incorrect.  Except for a couple of oddballs it isn't a label to 
> code at all -- it's a label to .rodata.  And for those Harvard ports
> that have different representations for code and data pointers, 
> having both use a LABEL_REF causes problems.
> 
> So we should have a TABLEJUMP_REF that references the jump table,
> and if for some reason the jump table gets optimized away without
> optimizing out the references, we can emit a zero instead.

Perhaps using symbol_ref is just fine. For calls we also do use
symbol refs to addresses inside code segment.
> 
> Or simply have a pass just before final that removes such refs.
> 
> > I think we'd want to largely treat the s390 like the other ports; with the
> > caveat that we dump the table into the constant pool relatively late in
> > the compilation process.    ie, I'd like to present the optimizers with
> > a common model for dealing with tablejumps.
> 
> It doesn't seem unreasonable to treat the entire table jump as a
> unit during early optimization.  You'd want to lower early enough 
> to move address computation out of loops when possible, but otherwise
> there's little that can actually be simplified wrt other code.

This IMO well fits the midlevel/lowlevel RTL design.  In my eyes the "final"
midRTL lowering should be followed by PRE to move invariants out of the loop,
so we will not lose optimization opurtunities and get the advnatage of
possibility to duplicate jumptables, that is important for superblock
formation. See for instance the interpreter in libjava, that do contain huge
switch for each instruction that is ifdefed out and replaced by indirect jumps
to avoid one jump instruction per simulation cycle. With tracer compiler will
be able to do the trick automagically.

Honza
> 
> 
> r~

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[law]

In message <20020205124050.GR17128@atrey.karlin.mff.cuni.cz>, Jan Hubicka write
s:
 > > On Mon, Feb 04, 2002 at 08:29:58PM -0700, law@redhat.com wrote:
 > > > What we could do in the short term is to delete the jump table when we
 > > > optimize the jump, but leave the CODE_LABEL alone.   That deals with the
 > > > immediate problem of needing to get unused jump tables out of the insn
 > > > stream.  By leaving the CODE_LABEL in the stream we avoid dangling
 > > > references in normal insns which used that label for computations.
 > > 
 > > If we're going to dream, I think using CODE_LABEL at all for this
 > > is incorrect.  Except for a couple of oddballs it isn't a label to 
 > > code at all -- it's a label to .rodata.  And for those Harvard ports
 > > that have different representations for code and data pointers, 
 > > having both use a LABEL_REF causes problems.
 > > 
 > > So we should have a TABLEJUMP_REF that references the jump table,
 > > and if for some reason the jump table gets optimized away without
 > > optimizing out the references, we can emit a zero instead.
 > 
 > Perhaps using symbol_ref is just fine. For calls we also do use
 > symbol refs to addresses inside code segment.
No.  I really prefer Richard's idea of creating a new _REF node.  Why?  
Because LABEL_REF implies a label in the code segment and SYMBOL_REF
implies a label outside the code segment.  For the label before a jump
table, we don't know where it'll end up.  Some ports put the table in
the code segment, others in readonly data, others in r/w data.

jeff

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[Richard Henderson]

On Tue, Feb 05, 2002 at 01:40:50PM +0100, Jan Hubicka wrote:
> Perhaps using symbol_ref is just fine. For calls we also do use
> symbol refs to addresses inside code segment.

And on thouse troublesome ports we have ENCODE_SECTION_INFO
to set e.g. SYMBOL_REF_FLAG to indicate a code segment address.
From whence would you call ENCODE_SECTION_INFO from this?

Of course, don't get me started on how SYMBOL_REF should be
cleaned up as well.


r~

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[Jan Hubicka]

> On Tue, Feb 05, 2002 at 01:40:50PM +0100, Jan Hubicka wrote:
> > Perhaps using symbol_ref is just fine. For calls we also do use
> > symbol refs to addresses inside code segment.
> 
> And on thouse troublesome ports we have ENCODE_SECTION_INFO
> to set e.g. SYMBOL_REF_FLAG to indicate a code segment address.
> >From whence would you call ENCODE_SECTION_INFO from this?
> 
> Of course, don't get me started on how SYMBOL_REF should be
> cleaned up as well.

Perhaps instead of generating many *_REF beasts, we should use
one with flags specifying the segment _REF is in. We partly do that
for SYMBOL_REF and static storage anyway.

But this is another involved topic :(

Honza
> 
> 
> r~

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[law]

In message <200202042337.g14NbDAV020955@hiauly1.hia.nrc.ca>, "John David Anglin
" writes:
 > > On Tue, Jan 15, 2002 at 06:16:14PM -0500, John David Anglin wrote:
 > > > This patch fixes the problem by deleting the jump table data when a
 > > > conditional or computed jump is converted to an unconditional jump.
 > > > I have verified that the patch fixes the original problem observed
 > > > under vax-dec-ultrix4.3.  A new vax bootstrap is underway but it
 > > > won't finish until sometime next month.
 > > 
 > > This is extremely delicate.  It is not uncommon for there to 
 > > be references remaining to the jump table that won't be deleted
 > > until later dead code elimination.
 > > 
 > > I'm therefore uncomfortable with simply removing it like this.
 > > I'm not sure what to suggest as an alternative though...
 > 
 > Does this look better?  The patch no longer removes the jump table.
 > It simply changes the branch destination to a new label following
 > the jump table when it detects that the target of the jump is the
 > following insn.  The subsequent flow analysis deletes the unused jump
 > table.  This should only happen on the vax.
 > 
 > Tested on vax-dec-ultrix4.3 and various PA builds for the last month.
 > 
 > OK?
 > 
 > Dave
 > -- 
 > J. David Anglin                                  dave.anglin@nrc.ca
 > National Research Council of Canada              (613) 990-0752 (FAX: 952-66
 > 05)
 > 
 > 2002-01-16	John David Anglin  <dave@hiauly1.hia.nrc.ca>
 > 
 > 	* cse.c (cse_insn): Fix the destination of unconditional jumps to an
 > 	immediately following code label, followed by jump table data.
I hate to interject myself into this conversation, but I think Richard is
wrong here.

If we convert a tablejump into a simpler jump, then we should (if at all
possible) remove the associated jump table.  Numerous unpleasant problems
arise if we leave an unreferenced jump table in the insn stream.

Or maybe we just bite the bullet right now, today and attach the jump
table to the jump itself.  I realize that we're rather late in the gcc-3.1
process, but we've clearly got a problem that needs to be addressed and
the various attempts at addressing it within the existing framework have
inevitably caused problems.  That tells me we need to fix the underlying
framework.

jeff

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[Jan Hubicka]

> > The ICE occurs in verify_flow_info when it encounters a barrier.  It appears
> > that case insn's are being incorrectly simplified in the cse2 pass.  This
> > is the rtl from loop:
> 
> The ICE occurs because the original conditional jump gets converted to
> an unconditional jump and a barrier is added after the jump.  However,
> the jump table data still remains in the rtl for the block.  This
> confuses the edge analysis into thinking that the block falls thru
> and we have an inconsistent configuration.

This is bit dangerous, as at some targets, the instructions to compute
jump destination may remain in the insn stream until after liveness analysis
that should zap them as dead.

They should not reference deleted label, so maximally one can convert it
into NOTE_INSN_DELETED_LABEL.

My approach in the cfg is to keep the tables around and sweep them once done
with CSE, but I guess it is easier to zap them to NOTE_INSN_DELETED_LABEL instead.
I plan to do that move on the cfg branch.

In your case all you need is to use delete_insn_chain for the two insns that
cares to create the note instead.

Honza
> 
> This patch fixes the problem by deleting the jump table data when a
> conditional or computed jump is converted to an unconditional jump.
> I have verified that the patch fixes the original problem observed
> under vax-dec-ultrix4.3.  A new vax bootstrap is underway but it
> won't finish until sometime next month.
> 
> Bootstrap checked with no regressions on i686-pc-linux-gnu and
> hppa2.0w-hp-hpux11.11.
> 
> OK to install?
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)
> 
> 2002-01-14  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* cse.c (cse_insn): Delete jump table data when a conditional or
> 	computed jump is converted to an unconditional jump.
> 
> --- cse.c.orig	Mon Jan 14 12:24:57 2002
> +++ cse.c	Mon Jan 14 17:48:32 2002
> @@ -5767,9 +5767,19 @@
>  	 be a conditional or computed branch.  */
>        else if (dest == pc_rtx && GET_CODE (src) == LABEL_REF)
>  	{
> -	  /* Now emit a BARRIER after the unconditional jump.  */
> -	  if (NEXT_INSN (insn) == 0
> -	      || GET_CODE (NEXT_INSN (insn)) != BARRIER)
> +	  rtx next = NEXT_INSN (insn);
> +	  rtx tmp;
> +
> +	  /* Delete jump table data if present.  */
> +	  if (next != NULL_RTX
> +	      && LABEL_P (next)
> +	      && (tmp = NEXT_INSN (next)) != NULL_RTX
> +	      && JUMP_TABLE_DATA_P (tmp))
> +	    delete_insn (tmp);
> +
> +	  /*  Now emit a BARRIER after the unconditional jump.  */
> +	  if (next == NULL_RTX
> +	      || GET_CODE (next) != BARRIER)
>  	    emit_barrier_after (insn);
>  
>  	  /* We reemit the jump in as many cases as possible just in

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[John David Anglin]

> My approach in the cfg is to keep the tables around and sweep them once done
> with CSE, but I guess it is easier to zap them to NOTE_INSN_DELETED_LABEL instead.
> I plan to do that move on the cfg branch.
> 
> In your case all you need is to use delete_insn_chain for the two insns that
> cares to create the note instead.

We have

(jump (pc) (label_ref 1))

(code_label 1)

(jump_insn (addr_diff_vec:HI (label_ref: 1)
  ...

You are suggesting deleting first two with NOTE_INSN_DELETED_LABEL?
Of course, this would be done only when the jump goes to the next insn.
This still leaves the jump table in live code which I don't like.

Another alternative might be to add a code_label after the jump table
and add a new jump before the first jump.  This should make the three
insn dead.  Would this be safer?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Re: ICE in 920624-1.c with -O3 -funroll-loops on vax-dec-ultrix4.3

[Jan Hubicka]

> > My approach in the cfg is to keep the tables around and sweep them once done
> > with CSE, but I guess it is easier to zap them to NOTE_INSN_DELETED_LABEL instead.
> > I plan to do that move on the cfg branch.
> > 
> > In your case all you need is to use delete_insn_chain for the two insns that
> > cares to create the note instead.
> 
> We have
> 
> (jump (pc) (label_ref 1))
> 
> (code_label 1)
> 
> (jump_insn (addr_diff_vec:HI (label_ref: 1)
>   ...
> 
> You are suggesting deleting first two with NOTE_INSN_DELETED_LABEL?
> Of course, this would be done only when the jump goes to the next insn.
> This still leaves the jump table in live code which I don't like.

No, just remove the second two using remove_insn_chain call - that should
turn label to NOTE_INSN_DELETED_LABEL if it is still referenced and remove
the jumptable - that should be what you are looking for.
> 
> Another alternative might be to add a code_label after the jump table
> and add a new jump before the first jump.  This should make the three
> insn dead.  Would this be safer?

That should work too, but it is bit complex.

Honza
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Fix ld_library_path in g77.exp for hppa64-hp-hpux11.X

[John David Anglin]

> 
> HP-UX shared libraries usually end in '.sl'.  The patch removes the check
> for libg2c.so before appending the path for for it to ld_library_path.
> See similar code in g++.exp.  This patch fixes several hundred FAILs on
> hppa64-hp-hpux11.X in running the g77 testsuite.
> 
> OK to install?
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)
> 

And the patch!

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-01-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* lib/g77.exp (g77_link_flags): Remove check for libg2c.so in setting
	ld_library_path.

--- g77.exp.orig	Mon Nov 19 23:03:52 2001
+++ g77.exp	Sun Jan 20 19:09:46 2002
@@ -83,9 +83,7 @@
     if { $gccpath != "" } {
       if [file exists "${gccpath}/libf2c/.libs/libg2c.a"] {
           append flags "-L${gccpath}/libf2c/.libs "
-	  if [file exists "${gccpath}/libf2c/.libs/libg2c.so"] {
-	      append ld_library_path ":${gccpath}/libf2c/.libs"
-	  }
+          append ld_library_path ":${gccpath}/libf2c/.libs"
       }
       if [file exists "${gccpath}/libf2c/libfrtbegin.a"] {
           append flags "-L${gccpath}/libf2c "

Re: Fix predicate in decrement_and_branch_until_zero pattern on PA

[John David Anglin]

> > Ok, "preferred" was the wrong word, since it's overloaded in
> > this instance.  Nevertheless all alternatives are punished,
> > which seems wrong.
> 
> I will try removing the '!' from the 'm' alternative.

I have applied the following to address Richard's concerns about punishing
all alternatives and my concerns about allowing non register operands before
reload.  The patch updates the movb patterns in a manner similar to that
for decrement_and_branch_until_zero as it is my belief that they might
also be rerecognized after reload.  Booted and checked with no regressions
on hppa2.0w-hp-hpux11.x, hppa1.1-hp-hpux10.20, hppa64-hp-hpux11.x.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-01-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa-protos.h (reg_before_reload_operand): New function prototype.
	* pa.c (reg_before_reload_operand): New function implementation.
	* pa.md (decrement_and_branch_until_zero, movb): Use it.  Change "!*m"
	contraints to "*m".

--- pa-protos.h.orig	Sun Nov 11 12:45:02 2001
+++ pa-protos.h	Thu Jan 10 21:48:40 2002
@@ -83,6 +83,7 @@
 extern int arith32_operand PARAMS ((rtx, enum machine_mode));
 extern int uint32_operand PARAMS ((rtx, enum machine_mode));
 extern int reg_or_nonsymb_mem_operand PARAMS ((rtx, enum machine_mode));
+extern int reg_before_reload_operand PARAMS ((rtx, enum machine_mode));
 extern int reg_or_0_operand PARAMS ((rtx, enum machine_mode));
 extern int reg_or_0_or_nonsymb_mem_operand PARAMS ((rtx, enum machine_mode));
 extern int pre_cint_operand PARAMS ((rtx, enum machine_mode));
--- pa.c.orig	Tue Jan  8 11:09:41 2002
+++ pa.c	Thu Jan 10 22:37:02 2002
@@ -364,6 +364,28 @@
   return 0;
 }
 
+/* Return 1 if the operand is a register operand or a non-symbolic memory
+   operand after reload.  This predicate is used for branch patterns that
+   internally handle register reloading.  We need to accept non-symbolic
+   memory operands after reload to ensure that the pattern is still valid
+   if reload didn't find a hard register for the operand.  */
+
+int
+reg_before_reload_operand (op, mode)
+    register rtx op;
+    enum machine_mode mode;
+{
+  if (register_operand (op, mode))
+    return 1;
+
+  if (reload_completed
+      && memory_operand (op, mode)
+      && ! symbolic_memory_operand (op, mode))
+    return 1;
+
+  return 0;
+}
+
 /* Accept any constant that can be moved in one instructions into a
    general register.  */
 int
--- pa.md.orig	Wed Jan  9 16:04:49 2002
+++ pa.md	Thu Jan 10 21:51:28 2002
@@ -6589,7 +6589,7 @@
 	(if_then_else
 	  (match_operator 2 "comparison_operator"
 	   [(plus:SI
-	      (match_operand:SI 0 "reg_or_nonsymb_mem_operand" "+!r,!*f,!*m")
+	      (match_operand:SI 0 "reg_before_reload_operand" "+!r,!*f,*m")
 	      (match_operand:SI 1 "int5_operand" "L,L,L"))
 	    (const_int 0)])
 	  (label_ref (match_operand 3 "" ""))
@@ -6646,7 +6646,7 @@
 	   [(match_operand:SI 1 "register_operand" "r,r,r,r") (const_int 0)])
 	  (label_ref (match_operand 3 "" ""))
 	  (pc)))
-   (set (match_operand:SI 0 "register_operand" "=!r,!*f,!*m,!*q")
+   (set (match_operand:SI 0 "reg_before_reload_operand" "=!r,!*f,*m,!*q")
 	(match_dup 1))]
   ""
 "* return output_movb (operands, insn, which_alternative, 0); "
@@ -6692,7 +6692,7 @@
 	   [(match_operand:SI 1 "register_operand" "r,r,r,r") (const_int 0)])
 	  (pc)
 	  (label_ref (match_operand 3 "" ""))))
-   (set (match_operand:SI 0 "register_operand" "=!r,!*f,!*m,!*q")
+   (set (match_operand:SI 0 "reg_before_reload_operand" "=!r,!*f,*m,!*q")
 	(match_dup 1))]
   ""
 "* return output_movb (operands, insn, which_alternative, 1); "

Re: Fix predicate in decrement_and_branch_until_zero pattern on PA

[Richard Henderson]

On Mon, Jan 21, 2002 at 06:20:27PM -0500, John David Anglin wrote:
> 	* pa.md (decrement_and_branch_until_zero, movb): Use it.  Change "!*m"
> 	contraints to "*m".

I think this is exactly wrong, and that you should be preferring r.


r~

Re: Fix predicate in decrement_and_branch_until_zero pattern on PA

[law]

In message <20020121152334.E19469@redhat.com>, Richard Henderson writes:
 > On Mon, Jan 21, 2002 at 06:20:27PM -0500, John David Anglin wrote:
 > > 	* pa.md (decrement_and_branch_until_zero, movb): Use it.  Change "!*m"
 > > 	contraints to "*m".
 > 
 > I think this is exactly wrong, and that you should be preferring r.
Are you sure?  Remember, we have to prefer memory operands for outputs during
reloading because this is a jump insn.

jeff

Re: Fix predicate in decrement_and_branch_until_zero pattern on PA

[Richard Henderson]

On Mon, Jan 21, 2002 at 04:24:25PM -0700, law@redhat.com wrote:
> Are you sure?  Remember, we have to prefer memory operands for outputs during
> reloading because this is a jump insn.

No, we just have to handle them.  We don't have to prefer them.


r~

Re: Fix predicate in decrement_and_branch_until_zero pattern on PA

[John David Anglin]

> On Mon, Jan 21, 2002 at 06:20:27PM -0500, John David Anglin wrote:
> > 	* pa.md (decrement_and_branch_until_zero, movb): Use it.  Change "!*m"
> > 	contraints to "*m".
> 
> I think this is exactly wrong, and that you should be preferring r.

Isn't 'r' still preferred if a reload isn't needed?  The predicate
ensures that the operand is always a register operand before reload.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Fix predicate in decrement_and_branch_until_zero pattern on PA

[Richard Henderson]

On Mon, Jan 21, 2002 at 06:29:42PM -0500, John David Anglin wrote:
> Isn't 'r' still preferred if a reload isn't needed?  The predicate
> ensures that the operand is always a register operand before reload.

Sorry, "penalized" not "preferred".  "r" is preferred because of
lack of "*", but should also not be penalized with "!".


r~

Re: Fix predicate in decrement_and_branch_until_zero pattern on PA

[John David Anglin]

> On Mon, Jan 21, 2002 at 06:29:42PM -0500, John David Anglin wrote:
> > Isn't 'r' still preferred if a reload isn't needed?  The predicate
> > ensures that the operand is always a register operand before reload.
> 
> Sorry, "penalized" not "preferred".  "r" is preferred because of
> lack of "*", but should also not be penalized with "!".

It was my understanding that "!" was used with "r" to prevent an
output reload.  The documentation states:

  Disparage severely the alternative that the @samp{!} appears in.
  This alternative can still be used if it fits without reloading,
  but if reloading is needed, some other alternative will be used.

We want to suppress reload from creating an output reload for the
insns using these patterns because they are for jump insns that only
can have one machine insn in the delay slot.  The output code
for theses patterns is supposed to handle any necessary reloads
itself.  If "!" is removed from the "r" constraint and added to
the "m" constrain, then it appears reload will choose the "r"
alternative with whatever reloads are needed rather than the "m"
alternative with no reloads.  This would be wrong and cause
incorrect code to be generated.

The goal in writing the constraint was to only penalize "r" if
a reload was needed.  We want the "r" alternative selected if no
reload is required.  Otherwise, we want "m" selected.  We don't
want any reloads for "m" either but I don't think this happens
when you start with a register operand.  How do we express this?

If "!" always severely disparages an alternative, then probably
the "!" should be put back on the "m" alternative so that all
alternatives are equally disparaged.  However, reload then
may be left with no alternative to select if you believe the
documentation.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Fix predicate in decrement_and_branch_until_zero pattern on PA

[Richard Henderson]

On Tue, Jan 22, 2002 at 12:14:46AM -0500, John David Anglin wrote:
> It was my understanding that "!" was used with "r" to prevent an
> output reload...

Looks like you're right.


r~

Re: Fix predicate in decrement_and_branch_until_zero pattern on PA

[John David Anglin]

> On Mon, Jan 21, 2002 at 06:29:42PM -0500, John David Anglin wrote:
> > Isn't 'r' still preferred if a reload isn't needed?  The predicate
> > ensures that the operand is always a register operand before reload.
> 
> Sorry, "penalized" not "preferred".  "r" is preferred because of
> lack of "*", but should also not be penalized with "!".

The following simple program compiled at -O2 on the PA with the current
mainline code uses the decrement_and_branch_until_zero pattern.

main ()
{
  int i;
  int j=0;
  for (i =0; i < 10; i++) j=j+1;
  exit (j);
}

The loop variable after combine ends up in a register (%r19) and not a
memory location.  Thus, the interpretation that "!" always severely
disparages an alternative is not correct.

On a different subject, I don't know why the loop wasn't eliminated
as the compiler determined the final result for j.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Fix loop.c for targets without HAVE_prefetch

[John David Anglin]

> > This patch
> > 
> > http://gcc.gnu.org/ml/gcc-patches/2002-01/msg01393.html

causes a new warning when PREFETCH_NOT_ALWAYS is 0:

../../gcc/gcc/loop.c:3573: warning: `check_store' defined but not used

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Fix loop.c for targets without HAVE_prefetch

[H . J . Lu]

On Wed, Jan 23, 2002 at 12:23:45AM -0500, John David Anglin wrote:
> > > This patch
> > > 
> > > http://gcc.gnu.org/ml/gcc-patches/2002-01/msg01393.html
> 
> causes a new warning when PREFETCH_NOT_ALWAYS is 0:
> 
> ../../gcc/gcc/loop.c:3573: warning: `check_store' defined but not used
> 

Here is a new patch.


H.J.
----
2002-01-23  H.J. Lu  (hjl@gnu.org)

	* loop.c (HAVE_prefetch): Don't define if not defined.
	(CODE_FOR_prefetch): Removed.
	(gen_prefetch): Removed.
	(check_store): Define only if HAVE_prefetch is
	defined.
	(emit_prefetch_instructions): Likewise.
	(rtx_equal_for_prefetch_p): Likewise.
	(remove_constant_addition): Likewise.

--- gcc/loop.c.prefetch	Wed Jan 23 09:00:37 2002
+++ gcc/loop.c	Wed Jan 23 12:08:49 2002
@@ -63,11 +63,6 @@ Software Foundation, 59 Temple Place - S
 #ifndef PREFETCH_BLOCK
 #define PREFETCH_BLOCK 32
 #endif
-#ifndef HAVE_prefetch
-#define HAVE_prefetch 0
-#define CODE_FOR_prefetch 0
-#define gen_prefetch(a,b,c) (abort(), NULL_RTX)
-#endif
 
 /* Give up the prefetch optimizations once we exceed a given threshhold.
    It is unlikely that we would be able to optimize something in a loop
@@ -352,7 +347,6 @@ static rtx loop_insn_sink_or_swim PARAMS
 
 static void loop_dump_aux PARAMS ((const struct loop *, FILE *, int));
 static void loop_delete_insns PARAMS ((rtx, rtx));
-static HOST_WIDE_INT remove_constant_addition PARAMS ((rtx *));
 void debug_ivs PARAMS ((const struct loop *));
 void debug_iv_class PARAMS ((const struct iv_class *));
 void debug_biv PARAMS ((const struct induction *));
@@ -3566,6 +3560,8 @@ struct check_store_data
   int mem_write;
 };
 
+#ifdef HAVE_prefetch
+static HOST_WIDE_INT remove_constant_addition PARAMS ((rtx *));
 static void check_store PARAMS ((rtx, rtx, void *));
 static void emit_prefetch_instructions PARAMS ((struct loop *));
 static int rtx_equal_for_prefetch_p PARAMS ((rtx, rtx));
@@ -4069,6 +4065,7 @@ emit_prefetch_instructions (loop)
 
   return;
 }
+#endif
 \f
 /* A "basic induction variable" or biv is a pseudo reg that is set
    (within this loop) only by incrementing or decrementing it.  */

Re: gcc failed to bootstrap on Linux/mipsel

[John David Anglin]

> > for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
> >       if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i)
> > 	    && rtx_varies_p (gen_rtx_REG (Pmode, i), /*for_alias=*/1))

I see the problem.  The comment for the above is incorrect:

  /* Invalidate all hard registers clobbered by calls.  With one exception:
     a call-clobbered PIC register is still function-invariant for our
     purposes, since we can hoist any PIC calculations out of the loop.
     Thus the call to rtx_varies_p.  */

You can hoist any insns involving the PIC register except those
that set it.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: gcc failed to bootstrap on Linux/mipsel

[Richard Henderson]

On Mon, Jan 28, 2002 at 12:04:49PM -0500, John David Anglin wrote:
> > > for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
> > >       if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i)
> > > 	    && rtx_varies_p (gen_rtx_REG (Pmode, i), /*for_alias=*/1))
> 
> I see the problem.  The comment for the above is incorrect:
> 
>   /* Invalidate all hard registers clobbered by calls.  With one exception:
>      a call-clobbered PIC register is still function-invariant for our
>      purposes, since we can hoist any PIC calculations out of the loop.
>      Thus the call to rtx_varies_p.  */
> 
> You can hoist any insns involving the PIC register except those
> that set it.

Bugger all.  Well, I guess we'll just have to do for_alias=0
for now.  I don't think we can fix this properly for 3.1.


r~

Re: gcc failed to bootstrap on Linux/mipsel

[John David Anglin]

> > You can hoist any insns involving the PIC register except those
> > that set it.
> 
> Bugger all.  Well, I guess we'll just have to do for_alias=0
> for now.  I don't think we can fix this properly for 3.1.

Is this obviously wrong?  I'm trying it now.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-01-28  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* loop.c (scan_loop): Don't hoist insns that set the pic offset table
	register if PIC_OFFSET_TABLE_REG_CALL_CLOBBERED is defined and we are
	generating PIC code.

--- loop.c.orig	Fri Jan 25 00:04:25 2002
+++ loop.c	Mon Jan 28 13:49:58 2002
@@ -762,6 +762,9 @@
       if (GET_CODE (p) == INSN
 	  && (set = single_set (p))
 	  && GET_CODE (SET_DEST (set)) == REG
+#ifdef PIC_OFFSET_TABLE_REG_CALL_CLOBBERED
+	  && (! flag_pic || SET_DEST (set) != pic_offset_table_rtx)
+#endif
 	  && ! regs->array[REGNO (SET_DEST (set))].may_not_optimize)
 	{
 	  int tem1 = 0;

Re: gcc failed to bootstrap on Linux/mipsel

[Richard Henderson]

On Mon, Jan 28, 2002 at 02:12:40PM -0500, John David Anglin wrote:
> +#ifdef PIC_OFFSET_TABLE_REG_CALL_CLOBBERED
> +	  && (! flag_pic || SET_DEST (set) != pic_offset_table_rtx)
> +#endif

Well flag_pic definitely shouldn't be here.  ia64 for instance
uses pic_offset_table_rtx all the time.


r~

Re: gcc failed to bootstrap on Linux/mipsel

[John David Anglin]

> On Mon, Jan 28, 2002 at 02:12:40PM -0500, John David Anglin wrote:
> > +#ifdef PIC_OFFSET_TABLE_REG_CALL_CLOBBERED
> > +	  && (! flag_pic || SET_DEST (set) != pic_offset_table_rtx)
> > +#endif
> 
> Well flag_pic definitely shouldn't be here.  ia64 for instance
> uses pic_offset_table_rtx all the time.

What about testing to see if the PIC_OFFSET_TABLE_REGNUM isn't a fixed
register?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: gcc failed to bootstrap on Linux/mipsel

[Richard Henderson]

On Mon, Jan 28, 2002 at 02:31:51PM -0500, John David Anglin wrote:
> What about testing to see if the PIC_OFFSET_TABLE_REGNUM isn't a fixed
> register?

I guess that would be ok.  Actualy, should change gen_reg_RTX
to check that and have loop test vs pic_offset_table_rtx.


r~

Re: gcc failed to bootstrap on Linux/mipsel

[John David Anglin]

> > What about testing to see if the PIC_OFFSET_TABLE_REGNUM isn't a fixed
> > register?
> 
> I guess that would be ok.  Actualy, should change gen_reg_RTX
> to check that and have loop test vs pic_offset_table_rtx.

This fixes cxa_vec.C and several hundred objc failures.  Tested on
hppa2.0w-hp-hpux11.11.

OK?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-01-28  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* emit-rtl.c (gen_rtx_REG): Check that the PIC_OFFSET_TABLE_REGNUM
	is a fixed register before returning pic_offset_table_rtx.
	* loop.c (scan_loop): Don't hoist insns that set pic_offset_table_rtx
	when PIC_OFFSET_TABLE_REG_CALL_CLOBBERED is defined.

--- emit-rtl.c.orig	Mon Jan 28 12:11:37 2002
+++ emit-rtl.c	Mon Jan 28 15:06:47 2002
@@ -411,7 +411,8 @@
       if (regno == RETURN_ADDRESS_POINTER_REGNUM)
 	return return_address_pointer_rtx;
 #endif
-      if (regno == PIC_OFFSET_TABLE_REGNUM)
+      if (regno == PIC_OFFSET_TABLE_REGNUM
+	  && fixed_regs[PIC_OFFSET_TABLE_REGNUM])
         return pic_offset_table_rtx;
       if (regno == STACK_POINTER_REGNUM)
 	return stack_pointer_rtx;
--- loop.c.orig	Fri Jan 25 00:04:25 2002
+++ loop.c	Mon Jan 28 15:00:03 2002
@@ -762,6 +762,9 @@
       if (GET_CODE (p) == INSN
 	  && (set = single_set (p))
 	  && GET_CODE (SET_DEST (set)) == REG
+#ifdef PIC_OFFSET_TABLE_REG_CALL_CLOBBERED
+	  && SET_DEST (set) != pic_offset_table_rtx
+#endif
 	  && ! regs->array[REGNO (SET_DEST (set))].may_not_optimize)
 	{
 	  int tem1 = 0;

Re: gcc failed to bootstrap on Linux/mipsel

[Richard Henderson]

On Mon, Jan 28, 2002 at 06:56:56PM -0500, John David Anglin wrote:
> 	* emit-rtl.c (gen_rtx_REG): Check that the PIC_OFFSET_TABLE_REGNUM
> 	is a fixed register before returning pic_offset_table_rtx.
> 	* loop.c (scan_loop): Don't hoist insns that set pic_offset_table_rtx
> 	when PIC_OFFSET_TABLE_REG_CALL_CLOBBERED is defined.

Ok.


r~

Re: Define _GNU_SOURCE in unwind-dw2-fde-glibc.c

[John David Anglin]

> I had a problem building unwind-dw2-fde-glibc.c under hppa-linux.  The
> header <link.h> needs _USE_GNU defined to define:

Argh!

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-02-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* unwind-dw2-fde-glibc.c: Define _GNU_SOURCE if not defined.

--- unwind-dw2-fde-glibc.c.orig	Thu Jan 10 18:11:48 2002
+++ unwind-dw2-fde-glibc.c	Thu Jan 24 15:10:08 2002
@@ -29,6 +29,10 @@
    segment and dl_iterate_phdr to avoid register/deregister calls at
    DSO load/unload.  */
 
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE 1
+#endif
+
 #include "auto-host.h" /* For HAVE_LD_EH_FRAME_HDR.  */
 #include "tconfig.h"
 #include <stddef.h>

Re: Define _GNU_SOURCE in unwind-dw2-fde-glibc.c

[Richard Henderson]

On Mon, Feb 04, 2002 at 03:46:01PM -0500, John David Anglin wrote:
> 	* unwind-dw2-fde-glibc.c: Define _GNU_SOURCE if not defined.

Ok.


r~

Re: Add missing predicate to PREDICATE_CODES on PA

[John David Anglin]

> This eliminates a few warnings compiling pa.c.  Tested on hppa2.0w-hp-hpux11.11.

Did it again!

-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-02-05  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa.h (PREDICATE_CODES): Add reg_before_reload_operand.

Index: config/pa/pa.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.h,v
retrieving revision 1.135
diff -c -3 -p -r1.135 pa.h
*** config/pa/pa.h	4 Feb 2002 21:37:14 -0000	1.135
--- config/pa/pa.h	5 Feb 2002 22:34:45 -0000
*************** while (0)
*** 1925,1930 ****
--- 1925,1931 ----
  			    CONST_DOUBLE, CONST, HIGH, CONSTANT_P_RTX}}, \
    {"symbolic_operand", {SYMBOL_REF, LABEL_REF, CONST}},			\
    {"symbolic_memory_operand", {SUBREG, MEM}},				\
+   {"reg_before_reload_operand", {SUBREG, MEM}},				\
    {"reg_or_nonsymb_mem_operand", {SUBREG, REG, MEM}},			\
    {"reg_or_0_or_nonsymb_mem_operand", {SUBREG, REG, MEM, CONST_INT,	\
  				       CONST_DOUBLE}},			\

Re: Add missing predicate to PREDICATE_CODES on PA

[Graham Stott]

John,

John David Anglin wrote:
> 
> > This eliminates a few warnings compiling pa.c.  Tested on hppa2.0w-hp-hpux11.11.
> 
> Did it again!
> 
> --
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)
> 
> 2002-02-05  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
>         * pa.h (PREDICATE_CODES): Add reg_before_reload_operand.
> 
> Index: config/pa/pa.h
> ===================================================================
> RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.h,v
> retrieving revision 1.135
> diff -c -3 -p -r1.135 pa.h
> *** config/pa/pa.h      4 Feb 2002 21:37:14 -0000       1.135
> --- config/pa/pa.h      5 Feb 2002 22:34:45 -0000
> *************** while (0)
> *** 1925,1930 ****
> --- 1925,1931 ----
>                             CONST_DOUBLE, CONST, HIGH, CONSTANT_P_RTX}}, \
>     {"symbolic_operand", {SYMBOL_REF, LABEL_REF, CONST}},                       \
>     {"symbolic_memory_operand", {SUBREG, MEM}},                         \
> +   {"reg_before_reload_operand", {SUBREG, MEM}},                               \
>     {"reg_or_nonsymb_mem_operand", {SUBREG, REG, MEM}},                 \
>     {"reg_or_0_or_nonsymb_mem_operand", {SUBREG, REG, MEM, CONST_INT,   \
>                                        CONST_DOUBLE}},                  \

I believe reg_before_reload_operand also accepts a REG so I think the list
of rtx codes should also include REG.

Graham

Re: Add missing predicate to PREDICATE_CODES on PA

[John David Anglin]

> >     {"symbolic_memory_operand", {SUBREG, MEM}},                         \
> > +   {"reg_before_reload_operand", {SUBREG, MEM}},                               \

> I believe reg_before_reload_operand also accepts a REG so I think the list
> of rtx codes should also include REG.

Thanks for noticing this.  I did a cut and paste from symbolic_memory_operand
which also has the same problem.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Add missing predicate to PREDICATE_CODES on PA

[John David Anglin]

> I believe reg_before_reload_operand also accepts a REG so I think the list
> of rtx codes should also include REG.

I changed reg_before_reload_operand to not accept SUBREG codes since
register_operand accepts them before reload.  They require an unwanted
reload.  The predicate codes for reg_before_reload_operand are now
REG and MEM.

Tested on hppa2.0w-hp-hpux11.11.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-02-10  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa.c (reg_before_reload_operand): Don't accept a SUBREG operand.
	* pa.h (PREDICATE_CODES): Adjust codes for reg_before_reload_operand.

--- pa.c.orig	Fri Feb  8 11:58:09 2002
+++ pa.c	Fri Feb  8 12:22:13 2002
@@ -387,6 +387,10 @@
     register rtx op;
     enum machine_mode mode;
 {
+  /* Don't accept a SUBREG since it will need a reload.  */
+  if (GET_CODE (op) == SUBREG)
+    return 0;
+
   if (register_operand (op, mode))
     return 1;
 
--- pa.h.orig	Wed Feb  6 11:27:43 2002
+++ pa.h	Fri Feb  8 12:23:27 2002
@@ -1925,7 +1925,7 @@
 			    CONST_DOUBLE, CONST, HIGH, CONSTANT_P_RTX}}, \
   {"symbolic_operand", {SYMBOL_REF, LABEL_REF, CONST}},			\
   {"symbolic_memory_operand", {SUBREG, MEM}},				\
-  {"reg_before_reload_operand", {SUBREG, MEM}},				\
+  {"reg_before_reload_operand", {REG, MEM}},			\
   {"reg_or_nonsymb_mem_operand", {SUBREG, REG, MEM}},			\
   {"reg_or_0_or_nonsymb_mem_operand", {SUBREG, REG, MEM, CONST_INT,	\
 				       CONST_DOUBLE}},			\

Re: Don't use lib2funcs.asm on PA

[John David Anglin]

> 2002-02-16  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* pa/t-pa (LIB2FUNCS_EXTRA): Don't build lib2funcs.asm.
> 	* pa/t-pro (LIB2FUNCS_EXTRA): Likewise.
> 	* som.h (DO_GLOBAL_DTORS_BODY): Delete define.

Revert.  It's a gdb hook.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Don't use lib2funcs.asm on PA

[law]

In message <200202162232.g1GMW4xp009467@hiauly1.hia.nrc.ca>, "John David Anglin
" writes:
 > > 2002-02-16  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 > > 
 > > 	* pa/t-pa (LIB2FUNCS_EXTRA): Don't build lib2funcs.asm.
 > > 	* pa/t-pro (LIB2FUNCS_EXTRA): Likewise.
 > > 	* som.h (DO_GLOBAL_DTORS_BODY): Delete define.
 > 
 > Revert.  It's a gdb hook.
Correct.  It's needed for inferior function calls.
jeff

Re: Don't use lib2funcs.asm on PA

[John David Anglin]

> Correct.  It's needed for inferior function calls.

I had hoped to get rid of it since it's one of those nasty milli routines.
Inferior calls don't seem to work with gdb under hppa-linux if I understand
correctly.  For example if I type "p func ()", gdb just crashes.  I also
can't step into functions although single stepping does work.  So, maybe
this function is needed with linux?

At the moment, I am trying to get frame notes working.  I am still trying
to find out how to handle parallels.  The suggestion from Olivier Hainque
didn't seem to work.  The stack frame adjustment still isn't getting
recorded correctly so it seems.  I believe that ARG_POINTER_CFA_OFFSET(FNDECL)
needs to be defined to 0.  However, when the context is set for rp,
The address is off by the amount of the stack adjustment (this is for
__cxa_throw).

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Don't use lib2funcs.asm on PA

[law]

In message <200202170051.g1H0p51Z009585@hiauly1.hia.nrc.ca>, "John David Anglin
" writes:
 > > Correct.  It's needed for inferior function calls.
 > 
 > I had hoped to get rid of it since it's one of those nasty milli routines.
 > Inferior calls don't seem to work with gdb under hppa-linux if I understand
 > correctly.  For example if I type "p func ()", gdb just crashes.  I also
 > can't step into functions although single stepping does work.  So, maybe
 > this function is needed with linux?
It is needed for hpux only, it should not be needed for linux.

It was created because the HP dynamic linker has some sanity checks in it
to verify that a return address is actually within a mapped text segment.

These checks triggered when doing an inferior call from gdb into routines
in shared libraries (such as malloc) because the inferior call trampoline
lives on the stack (so the return address is actually a stack location).

So we created __gcc_plt_call which we arrange to link into every binary
compiled with GCC, thus providing us with a location in a mapped text
segment that we can use for inferior function calls.

hppa-linux's dynamic linker likely doesn't have the silly sanity checks
and thus shouldn't need __gcc_plt_call.

As to why inferior calls don't work -- no clue.  You might ask Alan M. how
much GDB stuff was working for PA-linux when he left Linuxcare.  I can tell
you that getting inferior calls to work on the PA is a major PITA.

 > At the moment, I am trying to get frame notes working.  I am still trying
 > to find out how to handle parallels.  The suggestion from Olivier Hainque
 > didn't seem to work.  The stack frame adjustment still isn't getting
 > recorded correctly so it seems.  I believe that ARG_POINTER_CFA_OFFSET(FNDEC
 > L)
Hmmm, there is some specific magic to deal with PARALLELS on prologue
insns.  I think you set RTX_FRAME_RELATED_P on the PARALLEL and each item
within the PARALLEL.  Or something like that.  You can probably find an
example in one of the other target config files.

jeff

Re: Don't use lib2funcs.asm on PA

[John David Anglin]

> As to why inferior calls don't work -- no clue.  You might ask Alan M. how
> much GDB stuff was working for PA-linux when he left Linuxcare.  I can tell
> you that getting inferior calls to work on the PA is a major PITA.

It was in a pretty rock state (ie., didn't work at all).  I have worked
out a couple of hacks and now I have at least a partially functional gdb.
It's a little better that hppa64-hpux.  The most important fix was the
initialization of the register cache.  The problem is that it is done before
the arch initialize and the arch needs to be inited for REGISTER_BYTE.
This may be a problem for hppa64-hpux because in a backtrace the
arguments are garbled.  Under, hppa64-hpux I have been using the HP
version of gdb64 but it doesn't recognize debug symbols in a gcc compiled
object (it works for a HP compiled object).  However, it does do backtraces
and print registers ok.

>  > At the moment, I am trying to get frame notes working.  I am still trying
>  > to find out how to handle parallels.  The suggestion from Olivier Hainque
>  > didn't seem to work.  The stack frame adjustment still isn't getting
>  > recorded correctly so it seems.  I believe that ARG_POINTER_CFA_OFFSET(FNDEC
>  > L)
> Hmmm, there is some specific magic to deal with PARALLELS on prologue
> insns.  I think you set RTX_FRAME_RELATED_P on the PARALLEL and each item
> within the PARALLEL.  Or something like that.  You can probably find an
> example in one of the other target config files.

Yes, looked at dwarf2out.c to see what it expects.  I found some more
coding problems with PARALLEL's in the register save code and also that
the EH_RETURN_DATA_REGNO registers need to be saved if the function
calls eh_return.  The code still isn't quite right and needs some
reorganization, but my test code now throws.  However, there is a
problem in the catch.  Another day or two and I think that it will work.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Don't use lib2funcs.asm on PA

[Olivier Hainque]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

> Yes, looked at dwarf2out.c to see what it expects.  I found some more
> coding problems with PARALLEL's in the register save code and also that
> the EH_RETURN_DATA_REGNO registers need to be saved if the function
> calls eh_return. 

 Indeed. This is part of what we use for pa-hpux that I mentioned was not in
 a submittable state yet.

> However, there is a problem in the catch.

 It is very likely that what you are seeing is related to some problems we
 also "experimented". In the current state of things, we have added an
 eh_return pattern to the machine description and a "for_eh_return" argument
 to hppa_expand_epilogue. 

 Below is part of our patch that might well be of interest for your immediate
 troubles.  This part is not applicable as is but should give an idea of the
 kind of things we had to add to get things working (basically, emitting the
 stack adjustment and not restoring r2 in eh return epilogue).

 I did not include/submit the complete version yet because it still needs
 further testing, comments and partial reorg, but if you think it could be
 useful to see, I'd be happy to post and discuss it.

 Kind Regards,

 Olivier

     *************** pa_output_function_epilogue (file, size)
     *** 3390,3409 ****
       }

       void
     ! hppa_expand_epilogue ()
       {
         rtx tmpreg;
         int offset, i;
         int merge_sp_adjust_with_load = 0;
         int ret_off = 0;

         /* We will use this often.  */
         tmpreg = gen_rtx_REG (word_mode, 1);

         /* Try to restore RP early to avoid load/use interlocks when
            RP gets used in the return (bv) instruction.  This appears to still
            be necessary even when we schedule the prologue and epilogue.  */
     !   if (regs_ever_live [2])
           {
             ret_off = TARGET_64BIT ? -16 : -20;
             if (frame_pointer_needed)
     --- 3504,3533 ----
       }

       void
     ! hppa_expand_epilogue (int for_eh_return)
       {
         rtx tmpreg;
         int offset, i;
         int merge_sp_adjust_with_load = 0;
         int ret_off = 0;

     +   /* Compute the frame sizes now if running for eh_return since expand
     +      prologue has not been called yet.  */
     +   if (for_eh_return)
     +     {
     +       int size = get_frame_size ();
     +       
     +       local_fsize  = adjusted_frame_size_for (size);
     +       actual_fsize = compute_frame_size (size, &save_fregs);
     +     }
     +  
         /* We will use this often.  */
         tmpreg = gen_rtx_REG (word_mode, 1);

         /* Try to restore RP early to avoid load/use interlocks when
            RP gets used in the return (bv) instruction.  This appears to still
            be necessary even when we schedule the prologue and epilogue.  */
     !   if ((regs_ever_live [2] || flag_exceptions) && !for_eh_return)
           {
             ret_off = TARGET_64BIT ? -16 : -20;
             if (frame_pointer_needed)
     *************** hppa_expand_epilogue ()
     *** 3524,3531 ****

         /* If we haven't restored %r2 yet (no frame pointer, and a stack
            frame greater than 8k), do so now.  */
     !   if (ret_off != 0)
           load_reg (2, ret_off, STACK_POINTER_REGNUM);
       }

       rtx
     --- 3686,3703 ----

         /* If we haven't restored %r2 yet (no frame pointer, and a stack
            frame greater than 8k), do so now.  */
     !   if (ret_off != 0 && !for_eh_return)
           load_reg (2, ret_off, STACK_POINTER_REGNUM);
     + 
     +   /* Emit the stack adjustment for the jump to handler case.  */
     +   if (for_eh_return)
     +     {
     +       emit_move_insn 
     + 	(gen_rtx_REG (Pmode, STACK_POINTER_REGNUM),
     + 	 gen_rtx_MINUS (Pmode, 
     + 			gen_rtx_REG (Pmode, STACK_POINTER_REGNUM),
     + 			EH_RETURN_STACKADJ_RTX));
     +     }
       }

       rtx

Re: Don't use lib2funcs.asm on PA

[John David Anglin]

>  It is very likely that what you are seeing is related to some problems we
>  also "experimented". In the current state of things, we have added an
>  eh_return pattern to the machine description and a "for_eh_return" argument
>  to hppa_expand_epilogue. 

Thanks for the input.  The stack adjust was one thing that was missing.
Last night, I arrived at a set of modifications that allow the "stdexceptions"
test in libstdc++ to PASS when linked statically.  It still doesn't work
when linked with a shared libstdc++.  There were also more issues with the
frame note code and saving and restoring the eh data registers.

I believe that we need an eh_return pattern and use an interspace jump
to return from shared code.  I also need to figure out if an eh_return
can return a value.  If it can then the data registers need to be revised.
Now on the PA, external calls usually go via a stub.  One of the functions
of the stub is to message the outgoing arguments and the return value
so that the caller and callee agree on their location.  There could be
a problem with return values because I suspect we bypass the stub on
an eh_return.

I enclosed my latest work.  Comments appreciated.  I am going to try
to looked at the shared return today.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Index: config/pa/pa-linux.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa-linux.h,v
retrieving revision 1.12
diff -u -3 -p -r1.12 pa-linux.h
--- config/pa/pa-linux.h	15 Feb 2002 19:11:01 -0000	1.12
+++ config/pa/pa-linux.h	18 Feb 2002 04:32:28 -0000
@@ -23,6 +23,7 @@ Boston, MA 02111-1307, USA.  */
 #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
 #define DWARF2_ASM_LINE_DEBUG_INFO 1
 #define DWARF2_UNWIND_INFO 1
+#define ARG_POINTER_CFA_OFFSET(FNDECL) 0
 
 #undef CPP_PREDEFINES
 #define CPP_PREDEFINES "-D__ELF__ -Dunix -D__hppa__ -Dlinux -Asystem=unix -Asystem=posix -Acpu=hppa -Amachine=hppa -Amachine=bigendian"
Index: config/pa/pa.md
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.md,v
retrieving revision 1.101
diff -u -3 -p -r1.101 pa.md
--- config/pa/pa.md	4 Feb 2002 21:05:25 -0000	1.101
+++ config/pa/pa.md	18 Feb 2002 04:32:29 -0000
@@ -7216,14 +7216,12 @@
 ;; restore the PIC register.
 (define_expand "exception_receiver"
   [(const_int 4)]
-  "!TARGET_PORTABLE_RUNTIME && flag_pic"
+  "flag_pic"
   "
 {
-  /* Load the PIC register from the stack slot (in our caller's
-     frame).  */
-  emit_move_insn (pic_offset_table_rtx,
-		  gen_rtx_MEM (SImode,
-			       plus_constant (stack_pointer_rtx, -32)));
+  /* Restore the PIC register using hppa_pic_save_rtx ().  The
+     PIC register is not saved in the frame in 64-bit ABI.  */
+  emit_move_insn (pic_offset_table_rtx, hppa_pic_save_rtx ());
   emit_insn (gen_rtx (USE, VOIDmode, pic_offset_table_rtx));
   emit_insn (gen_blockage ());
   DONE;
Index: config/pa/pa.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.c,v
retrieving revision 1.148
diff -u -3 -p -r1.148 pa.c
--- config/pa/pa.c	12 Feb 2002 15:21:04 -0000	1.148
+++ config/pa/pa.c	18 Feb 2002 04:32:30 -0000
@@ -55,18 +55,6 @@ Boston, MA 02111-1307, USA.  */
 #endif
 #endif
 
-#if DO_FRAME_NOTES
-#define FRP(INSN) \
-  do					\
-    {					\
-      rtx insn = INSN;			\
-      RTX_FRAME_RELATED_P (insn) = 1;	\
-    }					\
-  while (0)
-#else
-#define FRP(INSN) INSN
-#endif
-
 #ifndef FUNC_BEGIN_PROLOG_LABEL
 #define FUNC_BEGIN_PROLOG_LABEL        "LFBP"
 #endif
@@ -83,6 +71,7 @@ static int compute_movstrsi_length PARAM
 static bool pa_assemble_integer PARAMS ((rtx, unsigned int, int));
 static void remove_useless_addtr_insns PARAMS ((rtx, int));
 static void store_reg PARAMS ((int, int, int));
+static void store_reg_modify PARAMS ((int, int, int));
 static void load_reg PARAMS ((int, int, int));
 static void set_reg_plus_d PARAMS ((int, int, int));
 static void pa_output_function_epilogue PARAMS ((FILE *, HOST_WIDE_INT));
@@ -2662,7 +2651,7 @@ output_ascii (file, p, size)
 	  fputs ("\"\n\t.STRING \"", file);
 	  chars_output = 0;
 	}
-      fwrite (partial_output, 1, co, file);
+      fwrite (partial_output, 1, (size_t) co, file);
       chars_output += co;
       co = 0;
     }
@@ -2933,6 +2922,50 @@ store_reg (reg, disp, base)
     RTX_FRAME_RELATED_P (insn) = 1;
 }
 
+/* Emit RTL to store REG at the memory location specified by BASE and then
+   add MOD to BASE.  MOD must be <= 8k.  */
+
+static void
+store_reg_modify (base, reg, mod)
+     int base, reg, mod;
+{
+  rtx insn, basereg, srcreg, delta;
+
+  if (! VAL_14_BITS_P (mod))
+    abort ();
+
+  basereg = gen_rtx_REG (Pmode, base);
+  srcreg = gen_rtx_REG (word_mode, reg);
+  delta = GEN_INT (mod);
+
+  insn = emit_insn (gen_post_store (basereg, srcreg, delta));
+  if (DO_FRAME_NOTES)
+    {
+      RTX_FRAME_RELATED_P (insn) = 1;
+
+      /* RTX_FRAME_RELATED_P must be set on each frame related set
+	 in a parallel with more than one element.  Don't set
+	 RTX_FRAME_RELATED_P in the first set if reg is temporary
+	 register 1. The effect of this operation is recorded in
+	 the initial copy.  */
+      if (reg != 1)
+	{
+	  RTX_FRAME_RELATED_P (XVECEXP (PATTERN (insn), 0, 0)) = 1;
+	  RTX_FRAME_RELATED_P (XVECEXP (PATTERN (insn), 0, 1)) = 1;
+	}
+      else
+	{
+	  /* The first element of a PARALLEL is always processed if it is
+	     a SET.  Thus, we need an expression list for this case.  */
+	  REG_NOTES (insn)
+	    = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR,
+		gen_rtx_SET (VOIDmode, basereg,
+			     gen_rtx_PLUS (word_mode, basereg, delta)),
+                REG_NOTES (insn));
+	}
+    }
+}
+
 /* Emit RTL to set REG to the value specified by BASE+DISP.
    Handle case where DISP > 8k by using the add_high_const patterns.
 
@@ -2981,6 +3014,18 @@ compute_frame_size (size, fregs_live)
      of them at the same time.  */
   fsize = size + (size || frame_pointer_needed ? STARTING_FRAME_OFFSET : 0);
 
+  /* If the current function calls __builtin_eh_return, then we need
+     to allocate stack space for registers that will hold data for
+     the exception handler.  */
+  if (DO_FRAME_NOTES && current_function_calls_eh_return)
+    {
+      unsigned int i;
+
+      for (i = 0; EH_RETURN_DATA_REGNO (i) != INVALID_REGNUM; ++i)
+	continue;
+      fsize += i * UNITS_PER_WORD;
+    }
+
   /* Account for space used by the callee general register saves.  */
   for (i = 18; i >= 3; i--)
     if (regs_ever_live[i])
@@ -3108,7 +3153,7 @@ hppa_expand_prologue ()
   int size = get_frame_size ();
   int merge_sp_adjust_with_store = 0;
   int i, offset;
-  rtx tmpreg, size_rtx;
+  rtx insn, tmpreg;
 
   gr_saved = 0;
   fr_saved = 0;
@@ -3126,7 +3171,6 @@ hppa_expand_prologue ()
 
   /* Compute a few things we will use often.  */
   tmpreg = gen_rtx_REG (word_mode, 1);
-  size_rtx = GEN_INT (actual_fsize);
 
   /* Save RP first.  The calling conventions manual states RP will
      always be stored into the caller's frame at sp - 20 or sp - 16
@@ -3141,36 +3185,30 @@ hppa_expand_prologue ()
 	{
 	  /* Copy the old frame pointer temporarily into %r1.  Set up the
 	     new stack pointer, then store away the saved old frame pointer
-	     into the stack at sp+actual_fsize and at the same time update
-	     the stack pointer by actual_fsize bytes.  Two versions, first
+	     into the stack at sp and at the same time update the stack
+	     pointer by actual_fsize bytes.  Two versions, first
 	     handles small (<8k) frames.  The second handles large (>=8k)
 	     frames.  */
-	  emit_move_insn (tmpreg, frame_pointer_rtx);
-	  FRP (emit_move_insn (frame_pointer_rtx, stack_pointer_rtx));
-	  if (VAL_14_BITS_P (actual_fsize))
+	  insn = emit_move_insn (tmpreg, frame_pointer_rtx);
+	  if (DO_FRAME_NOTES)
 	    {
-	      rtx insn = emit_insn (gen_post_store (stack_pointer_rtx, tmpreg,
-						    size_rtx));
-	      if (DO_FRAME_NOTES)
-		{
-		  rtvec vec;
-		  RTX_FRAME_RELATED_P (insn) = 1;
-		  vec = gen_rtvec (2,
-				   gen_rtx_SET (VOIDmode,
-						gen_rtx_MEM (word_mode,
-							     stack_pointer_rtx),
-						frame_pointer_rtx),
-				   gen_rtx_SET (VOIDmode,
-						stack_pointer_rtx,
-						gen_rtx_PLUS (word_mode,
-							      stack_pointer_rtx,
-							      size_rtx)));
-		  REG_NOTES (insn)
-		    = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR,
-					 gen_rtx_SEQUENCE (VOIDmode, vec),
-					 REG_NOTES (insn));
-		}
-	    }
+	      /* We need to record the frame pointer save here since the
+	         new frame pointer is set in the following insn.  */
+	      RTX_FRAME_RELATED_P (insn) = 1;
+	      REG_NOTES (insn)
+		= gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR,
+		    gen_rtx_SET (VOIDmode,
+				 gen_rtx_MEM (word_mode, stack_pointer_rtx),
+			         frame_pointer_rtx),
+		    REG_NOTES (insn));
+	    }
+
+	  insn = emit_move_insn (frame_pointer_rtx, stack_pointer_rtx);
+	  if (DO_FRAME_NOTES)
+	    RTX_FRAME_RELATED_P (insn) = 1;
+
+	  if (VAL_14_BITS_P (actual_fsize))
+	    store_reg_modify (STACK_POINTER_REGNUM, 1, actual_fsize);
 	  else
 	    {
 	      /* It is incorrect to store the saved frame pointer at *sp,
@@ -3181,32 +3219,12 @@ hppa_expand_prologue ()
 		 finish allocating the new frame.  */
 	      int adjust1 = 8192 - 64;
 	      int adjust2 = actual_fsize - adjust1;
-	      rtx delta = GEN_INT (adjust1);
-	      rtx insn = emit_insn (gen_post_store (stack_pointer_rtx, tmpreg,
-						    delta));
-	      if (DO_FRAME_NOTES)
-		{
-		  rtvec vec;
-		  RTX_FRAME_RELATED_P (insn) = 1;
-		  vec = gen_rtvec (2,
-				   gen_rtx_SET (VOIDmode,
-						gen_rtx_MEM (word_mode,
-							     stack_pointer_rtx),
-						frame_pointer_rtx),
-				   gen_rtx_SET (VOIDmode,
-						stack_pointer_rtx,
-						gen_rtx_PLUS (word_mode,
-							      stack_pointer_rtx,
-							      delta)));
-		  REG_NOTES (insn)
-		    = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR,
-					 gen_rtx_SEQUENCE (VOIDmode, vec),
-					 REG_NOTES (insn));
-		}
 
+	      store_reg_modify (STACK_POINTER_REGNUM, 1, adjust1);
 	      set_reg_plus_d (STACK_POINTER_REGNUM, STACK_POINTER_REGNUM,
 			      adjust2);
 	    }
+
 	  /* Prevent register spills from being scheduled before the
 	     stack pointer is raised.  Necessary as we will be storing
 	     registers using the frame pointer as a base register, and
@@ -3236,7 +3254,27 @@ hppa_expand_prologue ()
      was done earlier.  */
   if (frame_pointer_needed)
     {
-      for (i = 18, offset = local_fsize; i >= 4; i--)
+      offset = local_fsize;
+
+      /* Saving the EH return data registers in the frame is the simplest
+         way to get the frame unwind information emitted.  We put them
+	 just before the general registers.  */
+      if (DO_FRAME_NOTES && current_function_calls_eh_return)
+	{
+	  unsigned int i, regno;
+
+	  for (i = 0; ; ++i)
+	    {
+	      regno = EH_RETURN_DATA_REGNO (i);
+	      if (regno == INVALID_REGNUM)
+		break;
+
+	      store_reg (regno, offset, FRAME_POINTER_REGNUM);
+	      offset += UNITS_PER_WORD;
+	    }
+	}
+
+      for (i = 18; i >= 4; i--)
 	if (regs_ever_live[i] && ! call_used_regs[i])
 	  {
 	    store_reg (i, offset, FRAME_POINTER_REGNUM);
@@ -3249,18 +3287,42 @@ hppa_expand_prologue ()
   /* No frame pointer needed.  */
   else
     {
-      for (i = 18, offset = local_fsize - actual_fsize; i >= 3; i--)
+      offset = local_fsize - actual_fsize;
+
+      /* Saving the EH return data registers in the frame is the simplest
+         way to get the frame unwind information emitted.  */
+      if (DO_FRAME_NOTES && current_function_calls_eh_return)
+	{
+	  unsigned int i, regno;
+
+	  for (i = 0; ; ++i)
+	    {
+	      regno = EH_RETURN_DATA_REGNO (i);
+	      if (regno == INVALID_REGNUM)
+		break;
+
+	      /* If merge_sp_adjust_with_store is nonzero, then we can
+		 optimize the first save.  */
+	      if (merge_sp_adjust_with_store)
+		{
+		  store_reg_modify (STACK_POINTER_REGNUM, regno, -offset);
+		  merge_sp_adjust_with_store = 0;
+		}
+	      else
+		store_reg (regno, offset, STACK_POINTER_REGNUM);
+	      offset += UNITS_PER_WORD;
+	    }
+	}
+
+      for (i = 18; i >= 3; i--)
       	if (regs_ever_live[i] && ! call_used_regs[i])
 	  {
 	    /* If merge_sp_adjust_with_store is nonzero, then we can
 	       optimize the first GR save.  */
 	    if (merge_sp_adjust_with_store)
 	      {
-		rtx delta = GEN_INT (-offset);
+		store_reg_modify (STACK_POINTER_REGNUM, i, -offset);
 		merge_sp_adjust_with_store = 0;
-	        FRP (emit_insn (gen_post_store (stack_pointer_rtx,
-						gen_rtx_REG (word_mode, i),
-						delta)));
 	      }
 	    else
 	      store_reg (i, offset, STACK_POINTER_REGNUM);
@@ -3290,12 +3352,20 @@ hppa_expand_prologue ()
   /* Floating point register store.  */
   if (save_fregs)
     {
+      rtx base;
+
       /* First get the frame or stack pointer to the start of the FP register
 	 save area.  */
       if (frame_pointer_needed)
-	set_reg_plus_d (1, FRAME_POINTER_REGNUM, offset);
+	{
+	  set_reg_plus_d (1, FRAME_POINTER_REGNUM, offset);
+	  base = frame_pointer_rtx;
+	}
       else
-	set_reg_plus_d (1, STACK_POINTER_REGNUM, offset);
+	{
+	  set_reg_plus_d (1, STACK_POINTER_REGNUM, offset);
+	  base = stack_pointer_rtx;
+	}
 
       /* Now actually save the FP registers.  */
       for (i = FP_SAVED_REG_LAST; i >= FP_SAVED_REG_FIRST; i -= FP_REG_STEP)
@@ -3313,9 +3383,7 @@ hppa_expand_prologue ()
 		  REG_NOTES (insn)
 		    = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR,
 			gen_rtx_SET (VOIDmode,
-			  gen_rtx_MEM (DFmode,
-				       plus_constant (stack_pointer_rtx,
-						      offset)),
+			  gen_rtx_MEM (DFmode, plus_constant (base, offset)),
 			  reg),
 			REG_NOTES (insn));
 		}
@@ -3429,7 +3497,26 @@ hppa_expand_epilogue ()
   /* General register restores.  */
   if (frame_pointer_needed)
     {
-      for (i = 18, offset = local_fsize; i >= 4; i--)
+      offset = local_fsize;
+
+      /* If the current function calls __builtin_eh_return, then we need
+         to restore the saved EH data registers.  */
+      if (DO_FRAME_NOTES && current_function_calls_eh_return)
+	{
+	  unsigned int i, regno;
+
+	  for (i = 0; ; ++i)
+	    {
+	      regno = EH_RETURN_DATA_REGNO (i);
+	      if (regno == INVALID_REGNUM)
+		break;
+
+	      load_reg (regno, offset, FRAME_POINTER_REGNUM);
+	      offset += UNITS_PER_WORD;
+	    }
+	}
+
+      for (i = 18; i >= 4; i--)
 	if (regs_ever_live[i] && ! call_used_regs[i])
 	  {
 	    load_reg (i, offset, FRAME_POINTER_REGNUM);
@@ -3438,6 +3525,33 @@ hppa_expand_epilogue ()
     }
   else
     {
+      offset = local_fsize - actual_fsize;
+
+      /* If the current function calls __builtin_eh_return, then we need
+         to restore the saved EH data registers.  */
+      if (DO_FRAME_NOTES && current_function_calls_eh_return)
+	{
+	  unsigned int i, regno;
+
+	  for (i = 0; ; ++i)
+	    {
+	      regno = EH_RETURN_DATA_REGNO (i);
+	      if (regno == INVALID_REGNUM)
+		break;
+
+	      /* Only for the first load.
+	         merge_sp_adjust_with_load holds the register load
+	         with which we will merge the sp adjustment.  */
+	      if (merge_sp_adjust_with_load == 0
+		  && local_fsize == 0
+		  && VAL_14_BITS_P (-actual_fsize))
+	        merge_sp_adjust_with_load = regno;
+	      else
+		load_reg (regno, offset, STACK_POINTER_REGNUM);
+	      offset += UNITS_PER_WORD;
+	    }
+	}
+
       for (i = 18, offset = local_fsize - actual_fsize; i >= 3; i--)
 	{
 	  if (regs_ever_live[i] && ! call_used_regs[i])
@@ -3525,6 +3639,14 @@ hppa_expand_epilogue ()
     }
   else if (actual_fsize != 0)
     set_reg_plus_d (STACK_POINTER_REGNUM, STACK_POINTER_REGNUM, - actual_fsize);
+
+  if (DO_FRAME_NOTES && current_function_calls_eh_return)
+    {
+      rtx sa = EH_RETURN_STACKADJ_RTX;
+      emit_insn (Pmode == SImode
+		 ? gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, sa)
+		 : gen_adddi3 (stack_pointer_rtx, stack_pointer_rtx, sa));
+    }
 
   /* If we haven't restored %r2 yet (no frame pointer, and a stack
      frame greater than 8k), do so now.  */

Re: Don't use lib2funcs.asm on PA

[Olivier Hainque]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

> Thanks for the input.  The stack adjust was one thing that was missing.

 A pleasure :) Nice to hear to input has been useful.

> Last night, I arrived at a set of modifications that allow the
> "stdexceptions" test in libstdc++ to PASS when linked statically.

 Great !

> It still doesn't work when linked with a shared libstdc++.  There were also
> more issues with the frame note code and saving and restoring the eh data
> registers.
> 
> I believe that we need an eh_return pattern and use an interspace jump
> to return from shared code.  I also need to figure out if an eh_return
> can return a value.  If it can then the data registers need to be revised.
> Now on the PA, external calls usually go via a stub.  One of the functions
> of the stub is to message the outgoing arguments and the return value
> so that the caller and callee agree on their location.  There could be
> a problem with return values because I suspect we bypass the stub on
> an eh_return.

 This is indeed not straightforward and is actually what still needs further
 work in our setup.

> I am going to try to looked at the shared return today.

 OK. Thanks a lot :)
 
> I enclosed my latest work.  Comments appreciated. 

 I have not been able to read it in very detail yet and will do this shortly.

 Something seems surprising at first sight, though :

> @@ -3525,6 +3639,14 @@ hppa_expand_epilogue ()
>      }
>    else if (actual_fsize != 0)
>      set_reg_plus_d (STACK_POINTER_REGNUM, STACK_POINTER_REGNUM, - actual_fsize);
> +
> +  if (DO_FRAME_NOTES && current_function_calls_eh_return)
> +    {
> +      rtx sa = EH_RETURN_STACKADJ_RTX;
> +      emit_insn (Pmode == SImode
> +		 ? gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, sa)
> +		 : gen_adddi3 (stack_pointer_rtx, stack_pointer_rtx, sa));
> +    }
>  
>    /* If we haven't restored %r2 yet (no frame pointer, and a stack
>       frame greater than 8k), do so now.  */

 Isn't this doing the wrong thing in case a function calling
 __builtin_eh_return returns through a regular return path (as
 _Unwind_RaiseException might do) ?

 Avoiding that was the first purpose of introducing an eh_return pattern, but
 I may well be missing something.

 Thanks for your feedback,

 Kind Regards,

 Olivier

Re: Don't use lib2funcs.asm on PA

[John David Anglin]

> > +  if (DO_FRAME_NOTES && current_function_calls_eh_return)
> > +    {
> > +      rtx sa = EH_RETURN_STACKADJ_RTX;
> > +      emit_insn (Pmode == SImode
> > +		 ? gen_addsi3 (stack_pointer_rtx, stack_pointer_rtx, sa)
> > +		 : gen_adddi3 (stack_pointer_rtx, stack_pointer_rtx, sa));
> > +    }
> >  
> >    /* If we haven't restored %r2 yet (no frame pointer, and a stack
> >       frame greater than 8k), do so now.  */
> 
>  Isn't this doing the wrong thing in case a function calling
>  __builtin_eh_return returns through a regular return path (as
>  _Unwind_RaiseException might do) ?

I will investigate.  This code appears in the rs6000 code.  I think the answer
must be that sa is 0 in a normal return.  In the light of day, this code
appears in the wrong place.  In your code, you appear to subtract the stack
adjustment rather than add it.

>  Avoiding that was the first purpose of introducing an eh_return pattern, but
>  I may well be missing something.

You didn't send you epilogue and eh_return patterns.  Could you?

I have integrated your frame size code into the epilogue for testing, although
it is adjusted to match what appears in hppa_expand_prologue and
compute_frame_size.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Don't use lib2funcs.asm on PA

[Olivier Hainque]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

> In your code, you appear to subtract the stack adjustment rather than add
> it.

 Humm, right. Need to investigate a bit to see how it could work for you 
 one way and us the other way.
 
> I have integrated your frame size code into the epilogue for testing,
> although it is adjusted to match what appears in hppa_expand_prologue and
> compute_frame_size.

 OK.

> You didn't send you epilogue and eh_return patterns.  Could you?

 Sure. For completeness and to avoid ambiguities, below is the whole patch we
 currently apply, minus the hpux specific stuff. This is still ongoing work,
 and all this is rather new to me, so ... :)

 I still need to look at your way of doing things in deeper detail but won't
 be able to do this today. BTW, I think it is possible to simplify (factorize)
 a significant chunk of the prologue expansion.

 Thanks a lot for your feedback and all,

 Olivier


*** config/pa/pa.c.gcc	Tue Feb 12 09:19:13 2002
--- config/pa/pa.c	Tue Feb 12 09:34:15 2002
*************** Boston, MA 02111-1307, USA.  */
*** 56,72 ****
  #endif
  
  #if DO_FRAME_NOTES
! #define FRP(INSN) \
!   do					\
!     {					\
!       rtx insn = INSN;			\
!       RTX_FRAME_RELATED_P (insn) = 1;	\
!     }					\
!   while (0)
  #else
  #define FRP(INSN) INSN
  #endif
  
  #ifndef FUNC_BEGIN_PROLOG_LABEL
  #define FUNC_BEGIN_PROLOG_LABEL        "LFBP"
  #endif
--- 56,98 ----
  #endif
  
  #if DO_FRAME_NOTES
! 
! static rtx mark_frp PARAMS ((rtx, int));
! 
! static rtx mark_frp (insn, go_down)
!      rtx insn;
!      int go_down;
! {
!   rtx pattern = PATTERN (insn);
! 
!   RTX_FRAME_RELATED_P (insn) = 1;
! 
!   if (go_down
!       && (GET_CODE (pattern) == PARALLEL
! 	  || GET_CODE (pattern) == SEQUENCE))
!     {                                
!       int par_index;                 
!       int limit = XVECLEN (pattern, 0); 
!       
!       for (par_index = 0; par_index < limit; par_index++) 
! 	{                                                 
! 	  rtx x = XVECEXP (pattern, 0, par_index);           
! 	  RTX_FRAME_RELATED_P (x) = 1;	              
! 	}
!     }
!   
!   return insn;
! }
! 
! #define FRP(INSN) mark_frp (INSN, 0)
! #define DEEP_FRP(INSN) mark_frp (INSN, 1)
! 
  #else
  #define FRP(INSN) INSN
+ #define DEEP_FRP(INSN) INSN
  #endif
  
+ 
  #ifndef FUNC_BEGIN_PROLOG_LABEL
  #define FUNC_BEGIN_PROLOG_LABEL        "LFBP"
  #endif
*************** static void pa_output_function_epilogue 
*** 89,94 ****
--- 115,123 ----
  static int pa_adjust_cost PARAMS ((rtx, rtx, rtx, int));
  static int pa_adjust_priority PARAMS ((rtx, int));
  static int pa_issue_rate PARAMS ((void));
+ static int eh_return_data_regs PARAMS ((void));
+ static int adjusted_frame_size_for PARAMS ((int));
+   
  
  /* Save the operands last given to a compare for use when we
     generate a scc or bcc insn.  */
*************** set_reg_plus_d (reg, base, disp)
*** 2963,2968 ****
--- 2992,3025 ----
      RTX_FRAME_RELATED_P (insn) = 1;
  }
  
+ /* Compute the number of EH_RETURN data registers available, needed to
+    compute the frame size properly.  */
+ 
+ static int
+ eh_return_data_regs (void)
+ {
+   int reg = 0;
+   
+   while (EH_RETURN_DATA_REGNO (reg) != INVALID_REGNUM)
+     reg ++;
+ 
+   return reg;
+ }
+ 
+ /* Adjust the frame space required to be able to save the locals, which is
+    the base space necessary for them + the space possibly needed above for
+    the frame pointer and alignment filler.  */
+ 
+ static int 
+ adjusted_frame_size_for (int base_size)
+ {
+   return base_size + 
+     ((base_size || frame_pointer_needed) ? STARTING_FRAME_OFFSET : 0);
+ }
+ 
+ /* Compute the space required for a complete frame requiring SIZE for
+    locals and count the number of fp regs live into FREGS_LIVE.  */
+ 
  int
  compute_frame_size (size, fregs_live)
       int size;
*************** compute_frame_size (size, fregs_live)
*** 2970,2982 ****
  {
    int i, fsize;
  
!   /* Space for frame pointer + filler. If any frame is allocated
!      we need to add this in because of STARTING_FRAME_OFFSET.
! 
!      Similar code also appears in hppa_expand_prologue.  Change both
!      of them at the same time.  */
!   fsize = size + (size || frame_pointer_needed ? STARTING_FRAME_OFFSET : 0);
! 
    /* Account for space used by the callee general register saves.  */
    for (i = 18; i >= 3; i--)
      if (regs_ever_live[i])
--- 3027,3039 ----
  {
    int i, fsize;
  
!   /* Adjust the base size to account for a possible frame pointer area.  */
!   fsize = adjusted_frame_size_for (size);
!   
!   /* Account for space potentially used for the eh register saves.  */
!   if (current_function_calls_eh_return)
!     fsize += eh_return_data_regs () * UNITS_PER_WORD;
!   
    /* Account for space used by the callee general register saves.  */
    for (i = 18; i >= 3; i--)
      if (regs_ever_live[i])
*************** hppa_expand_prologue ()
*** 3110,3123 ****
    fr_saved = 0;
    save_fregs = 0;
  
!   /* Allocate space for frame pointer + filler. If any frame is allocated
!      we need to add this in because of STARTING_FRAME_OFFSET.
! 
!      Similar code also appears in compute_frame_size.  Change both
!      of them at the same time.  */
!   local_fsize = size + (size || frame_pointer_needed
! 			? STARTING_FRAME_OFFSET : 0);
! 
    actual_fsize = compute_frame_size (size, &save_fregs);
  
    /* Compute a few things we will use often.  */
--- 3167,3173 ----
    fr_saved = 0;
    save_fregs = 0;
  
!   local_fsize  = adjusted_frame_size_for (size);
    actual_fsize = compute_frame_size (size, &save_fregs);
  
    /* Compute a few things we will use often.  */
*************** hppa_expand_prologue ()
*** 3127,3133 ****
    /* Save RP first.  The calling conventions manual states RP will
       always be stored into the caller's frame at sp - 20 or sp - 16
       depending on which ABI is in use.  */
!   if (regs_ever_live[2])
      store_reg (2, TARGET_64BIT ? -16 : -20, STACK_POINTER_REGNUM);
  
    /* Allocate the local frame and set up the frame pointer if needed.  */
--- 3177,3183 ----
    /* Save RP first.  The calling conventions manual states RP will
       always be stored into the caller's frame at sp - 20 or sp - 16
       depending on which ABI is in use.  */
!   if (regs_ever_live[2] || flag_exceptions)
      store_reg (2, TARGET_64BIT ? -16 : -20, STACK_POINTER_REGNUM);
  
    /* Allocate the local frame and set up the frame pointer if needed.  */
*************** hppa_expand_prologue ()
*** 3232,3238 ****
       was done earlier.  */
    if (frame_pointer_needed)
      {
!       for (i = 18, offset = local_fsize; i >= 4; i--)
  	if (regs_ever_live[i] && ! call_used_regs[i])
  	  {
  	    store_reg (i, offset, FRAME_POINTER_REGNUM);
--- 3282,3309 ----
       was done earlier.  */
    if (frame_pointer_needed)
      {
!       offset = local_fsize;
! 
!       /* Save the eh return data registers if necessary. These are supposed to
!          be caller-saved so there should be no overlap with the loop below.  */
!       if (current_function_calls_eh_return)
! 	{
! 	  for (i = 0; ;i ++)
! 	    {
! 	      unsigned int regno = EH_RETURN_DATA_REGNO(i);
! 
! 	      if (regno == INVALID_REGNUM)
! 		break;
! 
! 	      store_reg (regno, offset, FRAME_POINTER_REGNUM);
! 	      offset += UNITS_PER_WORD;
! 	      /* Don't update gr_saved here, since it is there for the
! 		 purpose of the CALLINFO arguments, which only care about
! 		 callee-saved registers.  */
! 	    }
! 	}
! 
!       for (i = 18; i >= 4; i--)
  	if (regs_ever_live[i] && ! call_used_regs[i])
  	  {
  	    store_reg (i, offset, FRAME_POINTER_REGNUM);
*************** hppa_expand_prologue ()
*** 3245,3252 ****
    /* No frame pointer needed.  */
    else
      {
!       for (i = 18, offset = local_fsize - actual_fsize; i >= 3; i--)
!       	if (regs_ever_live[i] && ! call_used_regs[i])
  	  {
  	    /* If merge_sp_adjust_with_store is nonzero, then we can
  	       optimize the first GR save.  */
--- 3316,3356 ----
    /* No frame pointer needed.  */
    else
      {
!       offset = local_fsize - actual_fsize;
! 
!       /* GCC_EH : ??? Is the merge_sp_adjust stuff correctly handled 
! 	 by this addition ?  */
!       if (current_function_calls_eh_return)
! 	{
! 	  for (i = 0; ;i ++)
! 	    {
! 	      unsigned int regno = EH_RETURN_DATA_REGNO(i);
! 
! 	      if (regno == INVALID_REGNUM)
! 		break;
! 
! 	      if (merge_sp_adjust_with_store)
! 		{
! 		  rtx delta = GEN_INT (-offset);
! 		  merge_sp_adjust_with_store = 0;
! 		  DEEP_FRP (emit_insn 
! 			    (gen_post_store 
! 			     (stack_pointer_rtx,
! 			      gen_rtx_REG (word_mode, regno), delta)));
! 		}
! 	      else
! 		store_reg (regno, offset, STACK_POINTER_REGNUM);
! 
! 	      offset += UNITS_PER_WORD;
! 	      /* Don't update gr_saved here, since it's purpose is the
! 		 CALLINFO arguments, which only care about callee-saved
! 		 registers.  */
! 	    }
! 	}
! 
! 
!       for (i = 18; i >= 3; i--)
!        	if (regs_ever_live[i] && ! call_used_regs[i])
  	  {
  	    /* If merge_sp_adjust_with_store is nonzero, then we can
  	       optimize the first GR save.  */
*************** hppa_expand_prologue ()
*** 3254,3262 ****
  	      {
  		rtx delta = GEN_INT (-offset);
  		merge_sp_adjust_with_store = 0;
! 	        FRP (emit_insn (gen_post_store (stack_pointer_rtx,
! 						gen_rtx_REG (word_mode, i),
! 						delta)));
  	      }
  	    else
  	      store_reg (i, offset, STACK_POINTER_REGNUM);
--- 3358,3367 ----
  	      {
  		rtx delta = GEN_INT (-offset);
  		merge_sp_adjust_with_store = 0;
! 	        DEEP_FRP (emit_insn
! 			  (gen_post_store (stack_pointer_rtx,
! 					   gen_rtx_REG (word_mode, i),
! 					   delta)));
  	      }
  	    else
  	      store_reg (i, offset, STACK_POINTER_REGNUM);
*************** hppa_expand_prologue ()
*** 3286,3322 ****
    /* Floating point register store.  */
    if (save_fregs)
      {
        /* First get the frame or stack pointer to the start of the FP register
! 	 save area.  */
        if (frame_pointer_needed)
! 	set_reg_plus_d (1, FRAME_POINTER_REGNUM, offset);
        else
! 	set_reg_plus_d (1, STACK_POINTER_REGNUM, offset);
! 
!       /* Now actually save the FP registers.  */
        for (i = FP_SAVED_REG_LAST; i >= FP_SAVED_REG_FIRST; i -= FP_REG_STEP)
  	{
  	  if (regs_ever_live[i]
  	      || (! TARGET_64BIT && regs_ever_live[i + 1]))
  	    {
! 	      rtx addr, insn, reg;
! 	      addr = gen_rtx_MEM (DFmode, gen_rtx_POST_INC (DFmode, tmpreg));
! 	      reg = gen_rtx_REG (DFmode, i);
! 	      insn = emit_move_insn (addr, reg);
! 	      if (DO_FRAME_NOTES)
! 		{
! 		  RTX_FRAME_RELATED_P (insn) = 1;
! 		  REG_NOTES (insn)
! 		    = gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR,
! 			gen_rtx_SET (VOIDmode,
! 			  gen_rtx_MEM (DFmode,
! 				       plus_constant (stack_pointer_rtx,
! 						      offset)),
! 			  reg),
! 			REG_NOTES (insn));
! 		}
! 	      offset += GET_MODE_SIZE (DFmode);
! 	      fr_saved++;
  	    }
  	}
      }
--- 3391,3436 ----
    /* Floating point register store.  */
    if (save_fregs)
      {
+       rtx vbase = 
+  	gen_rtx_REG (word_mode, (frame_pointer_needed
+  				 ? FRAME_POINTER_REGNUM
+  				 : STACK_POINTER_REGNUM));
+       
        /* First get the frame or stack pointer to the start of the FP register
!    	 save area.  */
        if (frame_pointer_needed)
!   	set_reg_plus_d (1, FRAME_POINTER_REGNUM, offset);
        else
!   	set_reg_plus_d (1, STACK_POINTER_REGNUM, offset);
!   
!       /* Now actually save the FP registers.  */      
        for (i = FP_SAVED_REG_LAST; i >= FP_SAVED_REG_FIRST; i -= FP_REG_STEP)
  	{
  	  if (regs_ever_live[i]
  	      || (! TARGET_64BIT && regs_ever_live[i + 1]))
  	    {
!  	      rtx addr, reg, insn;
!  	      
!    	      addr = gen_rtx_MEM (DFmode, gen_rtx_POST_INC (DFmode, tmpreg));
!    	      reg = gen_rtx_REG (DFmode, i);
!   	      insn = emit_move_insn (addr, reg);
!    	      fr_saved++;
!  	      
!   	      if (DO_FRAME_NOTES)
!   		{
!  		  rtx vaddr = 
!  		    gen_rtx_MEM (Pmode, plus_constant (vbase, offset));
!  		  
!  		  rtx intent = 
!  		    gen_rtx_SET (DFmode, vaddr, reg);
!  		  
!   		  RTX_FRAME_RELATED_P (insn) = 1;
!  		  REG_NOTES (insn) =
!  		    gen_rtx_EXPR_LIST (REG_FRAME_RELATED_EXPR, 
!  				       intent, REG_NOTES (insn));
!  		  
!  		  offset += GET_MODE_SIZE (DFmode);
!   		}
  	    }
  	}
      }
*************** pa_output_function_epilogue (file, size)
*** 3390,3409 ****
  }
  
  void
! hppa_expand_epilogue ()
  {
    rtx tmpreg;
    int offset, i;
    int merge_sp_adjust_with_load = 0;
    int ret_off = 0;
  
    /* We will use this often.  */
    tmpreg = gen_rtx_REG (word_mode, 1);
  
    /* Try to restore RP early to avoid load/use interlocks when
       RP gets used in the return (bv) instruction.  This appears to still
       be necessary even when we schedule the prologue and epilogue.  */
!   if (regs_ever_live [2])
      {
        ret_off = TARGET_64BIT ? -16 : -20;
        if (frame_pointer_needed)
--- 3504,3533 ----
  }
  
  void
! hppa_expand_epilogue (int for_eh_return)
  {
    rtx tmpreg;
    int offset, i;
    int merge_sp_adjust_with_load = 0;
    int ret_off = 0;
  
+   /* Compute the frame sizes now if running for eh_return since expand
+      prologue has not been called yet.  */
+   if (for_eh_return)
+     {
+       int size = get_frame_size ();
+       
+       local_fsize  = adjusted_frame_size_for (size);
+       actual_fsize = compute_frame_size (size, &save_fregs);
+     }
+  
    /* We will use this often.  */
    tmpreg = gen_rtx_REG (word_mode, 1);
  
    /* Try to restore RP early to avoid load/use interlocks when
       RP gets used in the return (bv) instruction.  This appears to still
       be necessary even when we schedule the prologue and epilogue.  */
!   if ((regs_ever_live [2] || flag_exceptions) && !for_eh_return)
      {
        ret_off = TARGET_64BIT ? -16 : -20;
        if (frame_pointer_needed)
*************** hppa_expand_epilogue ()
*** 3425,3431 ****
    /* General register restores.  */
    if (frame_pointer_needed)
      {
!       for (i = 18, offset = local_fsize; i >= 4; i--)
  	if (regs_ever_live[i] && ! call_used_regs[i])
  	  {
  	    load_reg (i, offset, FRAME_POINTER_REGNUM);
--- 3549,3571 ----
    /* General register restores.  */
    if (frame_pointer_needed)
      {
!       offset = local_fsize;
! 
!       if (current_function_calls_eh_return)
! 	{
! 	  for (i = 0; ;i ++)
! 	    {
! 	      unsigned int regno = EH_RETURN_DATA_REGNO(i);
! 
! 	      if (regno == INVALID_REGNUM)
! 		break;
! 	      
! 	      load_reg (regno, offset, FRAME_POINTER_REGNUM);
! 	      offset += UNITS_PER_WORD;
! 	    }
! 	}
! 
!       for (i = 18; i >= 4; i--)
  	if (regs_ever_live[i] && ! call_used_regs[i])
  	  {
  	    load_reg (i, offset, FRAME_POINTER_REGNUM);
*************** hppa_expand_epilogue ()
*** 3434,3440 ****
      }
    else
      {
!       for (i = 18, offset = local_fsize - actual_fsize; i >= 3; i--)
  	{
  	  if (regs_ever_live[i] && ! call_used_regs[i])
  	    {
--- 3574,3602 ----
      }
    else
      {
!       offset = local_fsize - actual_fsize;
! 
!       if (current_function_calls_eh_return)
! 	{
! 	  for (i = 0; ;i ++)
! 	    {
! 	      unsigned int regno = EH_RETURN_DATA_REGNO(i);
! 
! 	      if (regno == INVALID_REGNUM)
! 		break;
! 
! 	      if (merge_sp_adjust_with_load == 0
! 		  && local_fsize == 0
! 		  && VAL_14_BITS_P (-actual_fsize))
! 	        merge_sp_adjust_with_load = i;
! 	      else
! 		load_reg (regno, offset, STACK_POINTER_REGNUM);
! 	      
! 	      offset += UNITS_PER_WORD;
! 	    }
! 	}
! 
!       for (i = 18; i >= 3; i--)
  	{
  	  if (regs_ever_live[i] && ! call_used_regs[i])
  	    {
*************** hppa_expand_epilogue ()
*** 3524,3531 ****
  
    /* If we haven't restored %r2 yet (no frame pointer, and a stack
       frame greater than 8k), do so now.  */
!   if (ret_off != 0)
      load_reg (2, ret_off, STACK_POINTER_REGNUM);
  }
  
  rtx
--- 3686,3703 ----
  
    /* If we haven't restored %r2 yet (no frame pointer, and a stack
       frame greater than 8k), do so now.  */
!   if (ret_off != 0 && !for_eh_return)
      load_reg (2, ret_off, STACK_POINTER_REGNUM);
+ 
+   /* Emit the stack adjustment for the jump to handler case.  */
+   if (for_eh_return)
+     {
+       emit_move_insn 
+ 	(gen_rtx_REG (Pmode, STACK_POINTER_REGNUM),
+ 	 gen_rtx_MINUS (Pmode, 
+ 			gen_rtx_REG (Pmode, STACK_POINTER_REGNUM),
+ 			EH_RETURN_STACKADJ_RTX));
+     }
  }
  
  rtx
*** config/pa/pa.md	2001/11/10 00:22:52	1.98
--- config/pa/pa.md	2001/12/05 09:12:30
***************
*** 5578,5584 ****
    ""
    "
  {
!   hppa_expand_epilogue ();
    DONE;
  }")
  
--- 5578,5584 ----
    ""
    "
  {
!   hppa_expand_epilogue (0);
    DONE;
  }")
  
***************
*** 5595,5601 ****
      {
        rtx x;
  
!       hppa_expand_epilogue ();
        if (flag_pic)
  	x = gen_return_internal_pic (gen_rtx_REG (word_mode,
  						  PIC_OFFSET_TABLE_REGNUM));
--- 5595,5601 ----
      {
        rtx x;
  
!       hppa_expand_epilogue (0);
        if (flag_pic)
  	x = gen_return_internal_pic (gen_rtx_REG (word_mode,
  						  PIC_OFFSET_TABLE_REGNUM));
***************
*** 5606,5611 ****
--- 5606,5662 ----
    DONE;
  }")
  
+ (define_expand "eh_return"
+   [(use (match_operand 0 "register_operand" "r"))
+    (use (match_operand 1 "register_operand" "r"))]
+   ""
+ {
+   rtx sa = operands [0], ra = operands [1];
+ 
+   if (word_mode == SImode)
+     emit_insn (gen_hppa_eh_return_si (sa, ra));
+   else
+     emit_insn (gen_hppa_eh_return_di (sa, ra));
+ 
+   emit_barrier ();
+   DONE;
+ })
+ 
+ (define_insn "hppa_eh_return_si"
+  [(unspec_volatile [(match_operand:SI 0 "register_operand" "r")
+                     (match_operand:SI 1 "register_operand" "r") ] 5)]
+  "!TARGET_64BIT"
+  "#")
+ 
+ (define_insn "hppa_eh_return_di"
+  [(unspec_volatile [(match_operand:DI 0 "register_operand" "r")
+                     (match_operand:DI 1 "register_operand" "r")] 5)]
+  "TARGET_64BIT"
+  "#")
+ 
+ (define_split
+  [(unspec_volatile [(match_operand 0 "register_operand" "")
+                     (match_operand 1 "register_operand" "")] 5)]
+  "reload_completed"
+  [(const_int 0)]
+  "{
+    rtx x, sa = operands [0], ra = operands [1];
+ 
+    emit_move_insn (EH_RETURN_STACKADJ_RTX, sa);
+    emit_move_insn (EH_RETURN_HANDLER_RTX, ra);
+    hppa_expand_epilogue (1);
+ 
+    if (flag_pic)
+       x = gen_return_internal_pic (gen_rtx_REG (word_mode,
+ 					  PIC_OFFSET_TABLE_REGNUM));
+    else
+       x = gen_return_internal ();
+ 
+    emit_jump_insn (x);
+ 
+    DONE;
+   }")
+  
  ;; Special because we use the value placed in %r2 by the bl instruction
  ;; from within its delay slot to set the value for the 2nd parameter to
  ;; the call.
*** config/pa/pa-protos.h	2001/11/11 17:45:02	1.10
--- config/pa/pa-protos.h	2001/12/05 09:13:07
*************** extern int compute_frame_size PARAMS ((i
*** 138,144 ****
  extern int and_mask_p PARAMS ((unsigned HOST_WIDE_INT));
  extern int cint_ok_for_move PARAMS ((HOST_WIDE_INT));
  extern void hppa_expand_prologue PARAMS ((void));
! extern void hppa_expand_epilogue PARAMS ((void));
  extern int hppa_can_use_return_insn_p PARAMS ((void));
  extern int ior_mask_p PARAMS ((unsigned HOST_WIDE_INT));
  extern void compute_zdepdi_operands PARAMS ((unsigned HOST_WIDE_INT,
--- 138,144 ----
  extern int and_mask_p PARAMS ((unsigned HOST_WIDE_INT));
  extern int cint_ok_for_move PARAMS ((HOST_WIDE_INT));
  extern void hppa_expand_prologue PARAMS ((void));
! extern void hppa_expand_epilogue PARAMS ((int));
  extern int hppa_can_use_return_insn_p PARAMS ((void));
  extern int ior_mask_p PARAMS ((unsigned HOST_WIDE_INT));
  extern void compute_zdepdi_operands PARAMS ((unsigned HOST_WIDE_INT,

Re: Don't use lib2funcs.asm on PA

[Hans-Peter Nilsson]

On Sun, 17 Feb 2002, John David Anglin wrote:
> Yes, looked at dwarf2out.c to see what it expects.  I found some more
> coding problems with PARALLEL's in the register save code and also that
> the EH_RETURN_DATA_REGNO registers need to be saved if the function
> calls eh_return.

I've tripped over that last one too.  (Mental note: doc update
needed.)

brgds, H-P

Re: Don't use lib2funcs.asm on PA

[John David Anglin]

> >  Isn't this doing the wrong thing in case a function calling
> >  __builtin_eh_return returns through a regular return path (as
> >  _Unwind_RaiseException might do) ?
> 
> I will investigate.  This code appears in the rs6000 code.  I think the answer
> must be that sa is 0 in a normal return.  In the light of day, this code

Yes, see line 3180 in expand_eh_return in except.c.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Don't use lib2funcs.asm on PA

[Olivier Hainque]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

> I will investigate.  This code appears in the rs6000 code.  I think the
> answer must be that sa is 0 in a normal return.
[...] 
> Yes, see line 3180 in expand_eh_return in except.c.

 Oh, indeed, had forgotten about that. Sorry for the confusion. This bit
 in the epilogue deserves a comment I would say :) 

 Olivier

Re: fix for strct-pack-1.c regressions

[John David Anglin]

> > 2002-03-13  Aldy Hernandez  <aldyh@redhat.com>
> > 
> > 	* expmed.c (store_bit_field): Reset alias set for memory.
> > 	(extract_bit_field): Same.
> 
> This didn't fix the fails on hppa2.0w-hp-hpux11.11.

I'm wrong.  Somehow cvs seems to have downloaded an inconsistent
source tree at my end.  The patch entry was in the ChangeLog but
expmed.c was not patched.  Looking at this test on a hppa-linux
build that started a little later, the test now passes at -O2 and -Os.

Sorry for the confusion,
Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Letext...

[John David Anglin]

> The PA linux port suffers from this problem as well, and I presume that the

The following has been applied to the trunk and 3.1 branch.  It fixes
the same problem encountered on the sparc.  Tested with no regressions
on hppa-unknown-linux-gnu.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-03-28  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa-linux.h (LOCAL_LABEL_PREFIX): Define.

--- pa-linux.h.orig	Wed Mar 13 12:02:16 2002
+++ pa-linux.h	Thu Mar 28 11:12:52 2002
@@ -148,6 +148,10 @@
     }								\
   while (0)
 
+/* We want local labels to start with period if made with asm_fprintf.  */
+#undef LOCAL_LABEL_PREFIX
+#define LOCAL_LABEL_PREFIX "."
+
 /* Define these to generate the Linux/ELF/SysV style of internal
    labels all the time - i.e. to be compatible with
    ASM_GENERATE_INTERNAL_LABEL in <elfos.h>.  Compare these with the

Re: [PATCH] checking version of rtl flag access macros

[John David Anglin]

> I think that using RTL_FLAG_CHECKn is wrong.  It's not an error
> if the rtx is not a JUMP_INSN or a CALL_INSN.  However, the result

In looking at dbr_schedule, I see that INSN_ANNULLED_BRANCH_P and
INSN_FROM_TARGET_P apply to any active insn.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [PATCH] Jump bypassing and improved cprop (take 2)

[John David Anglin]

> By trial and error, I have determined that the following bootstrap failure
> under hppa-linux is a result of this patch:
> 
>         * rtl.h (CC0_P): New.
> 	* gcse.c (cprop_jump): Use it with single_set.  Tweak dump text.
> 	(cprop_insn): Allow any mode register; use CC0_P.  CSE out single_set.
> 	(bypass_block): Save old dest block for dump text.
> 	(bypass_conditional_jumps): Allow any mode register; use CC0_P.
> 	Allow only true SET insns, not single_set.
> 
> ./xgcc -B./ -B/home/dave/opt/gnu/hppa-linux/bin/ -isystem /home/dave/opt/gnu/hppa-linux/include -isystem /home/dave/opt/gnu/hppa-linux/sys-include -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -isystem ./include  -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include  -g0 -finhibit-size-directive -fno-inline-functions -fno-exceptions -fno-zero-initialized-in-bss  \
>    -c ../../gcc/gcc/crtstuff.c -DCRT_BEGIN \
>   -o crtbegin.o
> ../../gcc/gcc/crtstuff.c: In function `__do_global_dtors_aux':
> ../../gcc/gcc/crtstuff.c:282: internal error: Segmentation fault

I see that this is fixed (just a typo).

What actually started the hunt is the following ICE which is still present:

./xgcc -B./ -B/home/dave/opt/gnu/hppa-linux/bin/ -isystem /home/dave/opt/gnu/hppa-linux/include -isystem /home/dave/opt/gnu/hppa-linux/sys-include -O2  -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -isystem ./include  -fPIC -DELF=1 -DLINUX=1 -g -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED  -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include  -DL_muldi3 -c ../../gcc/gcc/libgcc2.c -o libgcc/./_muldi3.o
../../gcc/gcc/libgcc2.c: In function `__muldi3':
../../gcc/gcc/libgcc2.c:367: virtual array insn_addresses[211]: element 229 out of bounds in pa_output_function_prologue, at config/pa/pa.c:3185

The above error occurs on the following line:

      total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_insn ()));

INSN_UID (get_last_insn ()) is 229.  Something has messed up the size of
the array insn_addresses.  This could be the above mentioned patch or some
other subsequent patch.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [PATCH] Jump bypassing and improved cprop (take 2)

[law]

In message <200206032102.g53L2a7l012194@hiauly1.hia.nrc.ca>, "John David Anglin
" writes:
 > > By trial and error, I have determined that the following bootstrap failure
 > > under hppa-linux is a result of this patch:
 > > 
 > >         * rtl.h (CC0_P): New.
 > > 	* gcse.c (cprop_jump): Use it with single_set.  Tweak dump text.
 > > 	(cprop_insn): Allow any mode register; use CC0_P.  CSE out single_set.
 > > 	(bypass_block): Save old dest block for dump text.
 > > 	(bypass_conditional_jumps): Allow any mode register; use CC0_P.
 > > 	Allow only true SET insns, not single_set.
 > > 
 > > ./xgcc -B./ -B/home/dave/opt/gnu/hppa-linux/bin/ -isystem /home/dave/opt/g
 > nu/hppa-linux/include -isystem /home/dave/opt/gnu/hppa-linux/sys-include -O2
 >  -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes 
 > -isystem ./include  -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../../gcc/gc
 > c/config -I../../gcc/gcc/../include  -g0 -finhibit-size-directive -fno-inlin
 > e-functions -fno-exceptions -fno-zero-initialized-in-bss  \
 > >    -c ../../gcc/gcc/crtstuff.c -DCRT_BEGIN \
 > >   -o crtbegin.o
 > > ../../gcc/gcc/crtstuff.c: In function `__do_global_dtors_aux':
 > > ../../gcc/gcc/crtstuff.c:282: internal error: Segmentation fault
 > 
 > I see that this is fixed (just a typo).
 > 
 > What actually started the hunt is the following ICE which is still present:
 > 
 > ./xgcc -B./ -B/home/dave/opt/gnu/hppa-linux/bin/ -isystem /home/dave/opt/gnu
 > /hppa-linux/include -isystem /home/dave/opt/gnu/hppa-linux/sys-include -O2  
 > -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -
 > isystem ./include  -fPIC -DELF=1 -DLINUX=1 -g -DHAVE_GTHR_DEFAULT -DIN_LIBGC
 > C2 -D__GCC_FLOAT_NOT_NEEDED  -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../
 > ../gcc/gcc/config -I../../gcc/gcc/../include  -DL_muldi3 -c ../../gcc/gcc/li
 > bgcc2.c -o libgcc/./_muldi3.o
 > ../../gcc/gcc/libgcc2.c: In function `__muldi3':
 > ../../gcc/gcc/libgcc2.c:367: virtual array insn_addresses[211]: element 229 
 > out of bounds in pa_output_function_prologue, at config/pa/pa.c:3185
 > 
 > The above error occurs on the following line:
 > 
 >       total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_insn ()));
 > 
 > INSN_UID (get_last_insn ()) is 229.  Something has messed up the size of
 > the array insn_addresses.  This could be the above mentioned patch or some
 > other subsequent patch.
I think Jan mentioned that this was his bug and that he was working on it.

jeff

Re: [PATCH] Jump bypassing and improved cprop (take 2)

[Jan Hubicka]

>  > The above error occurs on the following line:
>  > 
>  >       total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_insn ()));
>  > 
>  > INSN_UID (get_last_insn ()) is 229.  Something has messed up the size of
>  > the array insn_addresses.  This could be the above mentioned patch or some
>  > other subsequent patch.
> I think Jan mentioned that this was his bug and that he was working on it.

I was asking for opinion for proper fix on the mailing list.
The problem is that now I delete NOTE_INSN_BLOCK_* notes during the
optimization and re-emit them in final.c when debug output is done.
This makes those notes to not have computed INSN_ADDRESS, that is
de-facto OK, given that note is not an instruction so it does not have
any address.

The code like this can be fixed easilly by finding first/last nonnote
instruction in the chain.

I am not sure whether we want to fix all incarnations in the port
dependent code or find way to iniitialize INSN_ADDRESS that can be done
eighter by moving the re-emit code before shorten_branches that has the
dwawback that existence/nonexistence of notes may result in different
code output on -g/non-g compilation or simply add the gaps into
INSN_ADDRESS array, that is also not so fortunate due to resizing
issues.

What do you think?
Honza
> 
> jeff

Re: [PATCH] Jump bypassing and improved cprop (take 2)

[John David Anglin]

> >  > The above error occurs on the following line:
> >  > 
> >  >       total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_insn ()));
> >  > 
> >  > INSN_UID (get_last_insn ()) is 229.  Something has messed up the size of
> >  > the array insn_addresses.  This could be the above mentioned patch or some

> The code like this can be fixed easilly by finding first/last nonnote
> instruction in the chain.

I am testing the enclosed patch per your suggestion.

> I am not sure whether we want to fix all incarnations in the port
> dependent code or find way to iniitialize INSN_ADDRESS that can be done
> eighter by moving the re-emit code before shorten_branches that has the
> dwawback that existence/nonexistence of notes may result in different
> code output on -g/non-g compilation or simply add the gaps into
> INSN_ADDRESS array, that is also not so fortunate due to resizing
> issues.

There only appears to be a couple of other ports with similar code to
determine the size of a function.  Most other uses of INSN_ADDRESSES
are probably ok.  Possibly, the function "get_last_nonnote_insn" could
be put in emit-rtl.c.  Then, it wouldn't be too onerous to change all
the ports.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-06-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa.c (get_last_nonnote_insn): New function.
	(pa_output_function_prologue): Use it.

Index: config/pa/pa.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.c,v
retrieving revision 1.167
diff -u -3 -p -r1.167 pa.c
--- config/pa/pa.c	31 May 2002 18:01:13 -0000	1.167
+++ config/pa/pa.c	4 Jun 2002 15:35:15 -0000
@@ -95,6 +95,7 @@ hppa_fpstore_bypass_p (out_insn, in_insn
 #endif
 #endif
 
+static rtx get_last_nonnote_insn PARAMS((void));
 static inline rtx force_mode PARAMS ((enum machine_mode, rtx));
 static void pa_combine_instructions PARAMS ((rtx));
 static int pa_can_combine_p PARAMS ((rtx, rtx, rtx, int, rtx, rtx, rtx));
@@ -3116,6 +3117,24 @@ compute_frame_size (size, fregs_live)
   return (fsize + STACK_BOUNDARY - 1) & ~(STACK_BOUNDARY - 1);
 }
 
+/* Return the last nonnote insn emitted in current sequence or current
+   function.  This routine looks inside SEQUENCEs.  */
+
+static rtx
+get_last_nonnote_insn ()
+{
+  rtx insn = get_last_insn ();
+
+  while (insn)
+    {
+      insn = previous_insn (insn);
+      if (insn == 0 || GET_CODE (insn) != NOTE)
+	break;
+    }
+
+  return insn;
+}
+
 /* Generate the assembly code for function entry.  FILE is a stdio
    stream to output the code to.  SIZE is an int: how many units of
    temporary storage to allocate.
@@ -3182,7 +3201,7 @@ pa_output_function_prologue (file, size)
     {
       unsigned int old_total = total_code_bytes;
 
-      total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_insn ()));
+      total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_nonnote_insn ()));
       total_code_bytes += FUNCTION_BOUNDARY / BITS_PER_UNIT;
 
       /* Be prepared to handle overflows.  */

Re: [PATCH] Jump bypassing and improved cprop (take 2)

[Jan Hubicka]

> > >  > The above error occurs on the following line:
> > >  > 
> > >  >       total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_insn ()));
> > >  > 
> > >  > INSN_UID (get_last_insn ()) is 229.  Something has messed up the size of
> > >  > the array insn_addresses.  This could be the above mentioned patch or some
> 
> > The code like this can be fixed easilly by finding first/last nonnote
> > instruction in the chain.
> 
> I am testing the enclosed patch per your suggestion.
> 
> > I am not sure whether we want to fix all incarnations in the port
> > dependent code or find way to iniitialize INSN_ADDRESS that can be done
> > eighter by moving the re-emit code before shorten_branches that has the
> > dwawback that existence/nonexistence of notes may result in different
> > code output on -g/non-g compilation or simply add the gaps into
> > INSN_ADDRESS array, that is also not so fortunate due to resizing
> > issues.
> 
> There only appears to be a couple of other ports with similar code to
> determine the size of a function.  Most other uses of INSN_ADDRESSES
> are probably ok.  Possibly, the function "get_last_nonnote_insn" could
> be put in emit-rtl.c.  Then, it wouldn't be too onerous to change all
> the ports.

Yes, this looks like sensible approach to me.  Thanks for fixing it!

Honza
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)
> 
> 2002-06-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* pa.c (get_last_nonnote_insn): New function.
> 	(pa_output_function_prologue): Use it.
> 
> Index: config/pa/pa.c
> ===================================================================
> RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.c,v
> retrieving revision 1.167
> diff -u -3 -p -r1.167 pa.c
> --- config/pa/pa.c	31 May 2002 18:01:13 -0000	1.167
> +++ config/pa/pa.c	4 Jun 2002 15:35:15 -0000
> @@ -95,6 +95,7 @@ hppa_fpstore_bypass_p (out_insn, in_insn
>  #endif
>  #endif
>  
> +static rtx get_last_nonnote_insn PARAMS((void));
>  static inline rtx force_mode PARAMS ((enum machine_mode, rtx));
>  static void pa_combine_instructions PARAMS ((rtx));
>  static int pa_can_combine_p PARAMS ((rtx, rtx, rtx, int, rtx, rtx, rtx));
> @@ -3116,6 +3117,24 @@ compute_frame_size (size, fregs_live)
>    return (fsize + STACK_BOUNDARY - 1) & ~(STACK_BOUNDARY - 1);
>  }
>  
> +/* Return the last nonnote insn emitted in current sequence or current
> +   function.  This routine looks inside SEQUENCEs.  */
> +
> +static rtx
> +get_last_nonnote_insn ()
> +{
> +  rtx insn = get_last_insn ();
> +
> +  while (insn)
> +    {
> +      insn = previous_insn (insn);
> +      if (insn == 0 || GET_CODE (insn) != NOTE)
> +	break;
> +    }
> +
> +  return insn;
> +}
> +
>  /* Generate the assembly code for function entry.  FILE is a stdio
>     stream to output the code to.  SIZE is an int: how many units of
>     temporary storage to allocate.
> @@ -3182,7 +3201,7 @@ pa_output_function_prologue (file, size)
>      {
>        unsigned int old_total = total_code_bytes;
>  
> -      total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_insn ()));
> +      total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_nonnote_insn ()));
>        total_code_bytes += FUNCTION_BOUNDARY / BITS_PER_UNIT;
>  
>        /* Be prepared to handle overflows.  */

Re: [PATCH] Jump bypassing and improved cprop (take 2)

[John David Anglin]

> > There only appears to be a couple of other ports with similar code to
> > determine the size of a function.  Most other uses of INSN_ADDRESSES
> > are probably ok.  Possibly, the function "get_last_nonnote_insn" could
> > be put in emit-rtl.c.  Then, it wouldn't be too onerous to change all
> > the ports.
> 
> Yes, this looks like sensible approach to me.  Thanks for fixing it!

This is the fix that I would like to apply to fix the problem of determining
the size of a function under hppa-linux and hppa64-hp-hpux11.  I believe
that the patch is functionally equivalent to what I proposed before for
just the PA port.  I have moved get_last_nonnote_insn to emit-rtl.c
and created a corresponding get_first_nonnote_insn for the avr port.
There is some question in my mind whether the latter question is actually
necessary but I don't want to second guess the code in avr.c.

Bootstrapped and regression tested under hppa-linux.

OK for mainline?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-06-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* emit-rtl.c (get_first_nonnote_insn, get_last_nonnote_insn): New
	functions.
	* rtl.h (get_first_nonnote_insn, get_last_nonnote_insn): Declare.
	* avr/avr.c (avr_output_function_epilogue): Use above to determine
	function size.
	* pa/pa.c (pa_output_function_prologue): Likewise.

Index: emit-rtl.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/emit-rtl.c,v
retrieving revision 1.269
diff -u -3 -p -r1.269 emit-rtl.c
--- emit-rtl.c	3 Jun 2002 01:13:14 -0000	1.269
+++ emit-rtl.c	4 Jun 2002 16:53:47 -0000
@@ -2743,6 +2743,42 @@ get_last_insn_anywhere ()
   return 0;
 }
 
+/* Return the first nonnote insn emitted in current sequence or current
+   function.  This routine looks inside SEQUENCEs.  */
+
+rtx
+get_first_nonnote_insn ()
+{
+  rtx insn = first_insn;
+
+  while (insn)
+    {
+      insn = next_insn (insn);
+      if (insn == 0 || GET_CODE (insn) != NOTE)
+	break;
+    }
+
+  return insn;
+}
+
+/* Return the last nonnote insn emitted in current sequence or current
+   function.  This routine looks inside SEQUENCEs.  */
+
+rtx
+get_last_nonnote_insn ()
+{
+  rtx insn = last_insn;
+
+  while (insn)
+    {
+      insn = previous_insn (insn);
+      if (insn == 0 || GET_CODE (insn) != NOTE)
+	break;
+    }
+
+  return insn;
+}
+
 /* Return a number larger than any instruction's uid in this function.  */
 
 int
Index: rtl.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/rtl.h,v
retrieving revision 1.352
diff -u -3 -p -r1.352 rtl.h
--- rtl.h	2 Jun 2002 21:09:43 -0000	1.352
+++ rtl.h	4 Jun 2002 16:53:48 -0000
@@ -1447,6 +1447,8 @@ extern rtx get_insns			PARAMS ((void));
 extern const char *get_insn_name	PARAMS ((int));
 extern rtx get_last_insn		PARAMS ((void));
 extern rtx get_last_insn_anywhere	PARAMS ((void));
+extern rtx get_first_nonnote_insn	PARAMS ((void));
+extern rtx get_last_nonnote_insn	PARAMS ((void));
 extern void start_sequence		PARAMS ((void));
 extern void push_to_sequence		PARAMS ((rtx));
 extern void end_sequence		PARAMS ((void));
Index: config/avr/avr.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/avr/avr.c,v
retrieving revision 1.72
diff -u -3 -p -r1.72 avr.c
--- config/avr/avr.c	1 Jun 2002 23:33:47 -0000	1.72
+++ config/avr/avr.c	4 Jun 2002 16:53:48 -0000
@@ -749,8 +749,8 @@ avr_output_function_epilogue (file, size
   interrupt_func_p = interrupt_function_p (current_function_decl);
   signal_func_p = signal_function_p (current_function_decl);
   main_p = MAIN_NAME_P (DECL_NAME (current_function_decl));
-  function_size = (INSN_ADDRESSES (INSN_UID (get_last_insn ()))
-		   - INSN_ADDRESSES (INSN_UID (get_insns ())));
+  function_size = (INSN_ADDRESSES (INSN_UID (get_last_nonnote_insn ()))
+		   - INSN_ADDRESSES (INSN_UID (get_first_nonnote_insn ())));
   function_size += jump_tables_size;
   live_seq = sequent_regs_live ();
   minimize = (TARGET_CALL_PROLOGUES
Index: config/pa/pa.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.c,v
retrieving revision 1.167
diff -u -3 -p -r1.167 pa.c
--- config/pa/pa.c	31 May 2002 18:01:13 -0000	1.167
+++ config/pa/pa.c	4 Jun 2002 16:53:49 -0000
@@ -3182,7 +3182,7 @@ pa_output_function_prologue (file, size)
     {
       unsigned int old_total = total_code_bytes;
 
-      total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_insn ()));
+      total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_nonnote_insn ()));
       total_code_bytes += FUNCTION_BOUNDARY / BITS_PER_UNIT;
 
       /* Be prepared to handle overflows.  */

Re: [PATCH] Jump bypassing and improved cprop (take 2)

[law]

In message <200206060430.g564UHjX021278@hiauly1.hia.nrc.ca>, "John David Anglin
" writes:
 > > > There only appears to be a couple of other ports with similar code to
 > > > determine the size of a function.  Most other uses of INSN_ADDRESSES
 > > > are probably ok.  Possibly, the function "get_last_nonnote_insn" could
 > > > be put in emit-rtl.c.  Then, it wouldn't be too onerous to change all
 > > > the ports.
 > > 
 > > Yes, this looks like sensible approach to me.  Thanks for fixing it!
 > 
 > This is the fix that I would like to apply to fix the problem of determining
 > the size of a function under hppa-linux and hppa64-hp-hpux11.  I believe
 > that the patch is functionally equivalent to what I proposed before for
 > just the PA port.  I have moved get_last_nonnote_insn to emit-rtl.c
 > and created a corresponding get_first_nonnote_insn for the avr port.
 > There is some question in my mind whether the latter question is actually
 > necessary but I don't want to second guess the code in avr.c.
 > 
 > Bootstrapped and regression tested under hppa-linux.
 > 
 > OK for mainline?
 > 
 > Dave
 > -- 
 > J. David Anglin                                  dave.anglin@nrc.ca
 > National Research Council of Canada              (613) 990-0752 (FAX: 952-66
 > 05)
 > 
 > 2002-06-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 > 
 > 	* emit-rtl.c (get_first_nonnote_insn, get_last_nonnote_insn): New
 > 	functions.
 > 	* rtl.h (get_first_nonnote_insn, get_last_nonnote_insn): Declare.
 > 	* avr/avr.c (avr_output_function_epilogue): Use above to determine
 > 	function size.
 > 	* pa/pa.c (pa_output_function_prologue): Likewise.
This is fine.

Thanks,
jeff

Re: Patch: Use tm_defines to configure default scheduling model on PA

[John David Anglin]

> config.gcc into
> 
>   #ifdef ABC
>   #define ABC foo
>   #endif

Oops, typo.

  #ifndef ABC
  #define ABC foo
  #endif

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Patch: Use tm_defines to configure default scheduling model on PA

[John David Anglin]

> 2002-06-05  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* Makefile.in (tm_defines): New configuration variable.
> 	(cs-config.h, cs-hconfig.h, cs-tconfig.h): Rename DEFINES to XM_DEFINES.
> 	Pass tm_defines in TM_DEFINES.
> 	(cs-tm_p.h): Rename DEFINES to XM_DEFINES.  Pass TM_DEFINES.
> 	* config.gcc (tm_defines): New configuration variable.
> 	(hppa*-*-* | parisc*-*-*): Use tm_defines instead of pa-700.h and
> 	pa-7100.h headers.  Change hppa1* scheduling default to 7100LC.
> 	* configure.in: Substitute tm_defines.
> 	* configure: Rebuilt.
> 	* mkconfig.sh: Rename DEFINES to XM_DEFINES.  Output TM_DEFINES.
> 	* pa/pa-700.h: Delete file.
> 	* pa/pa-7100.h: Delete file.

The above patch has not been reviewed.  Could one of the build machinery
maintainers review it?

Thanks,
Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Patch: Use tm_defines to configure default scheduling model on PA

[DJ Delorie]

> > 2002-06-05  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> > 
> > 	* Makefile.in (tm_defines): New configuration variable.
> > 	(cs-config.h, cs-hconfig.h, cs-tconfig.h): Rename DEFINES to XM_DEFINES.
> > 	Pass tm_defines in TM_DEFINES.
> > 	(cs-tm_p.h): Rename DEFINES to XM_DEFINES.  Pass TM_DEFINES.
> > 	* config.gcc (tm_defines): New configuration variable.
> > 	(hppa*-*-* | parisc*-*-*): Use tm_defines instead of pa-700.h and
> > 	pa-7100.h headers.  Change hppa1* scheduling default to 7100LC.
> > 	* configure.in: Substitute tm_defines.
> > 	* configure: Rebuilt.
> > 	* mkconfig.sh: Rename DEFINES to XM_DEFINES.  Output TM_DEFINES.
> > 	* pa/pa-700.h: Delete file.
> > 	* pa/pa-7100.h: Delete file.
> 
> The above patch has not been reviewed.  Could one of the build machinery
> maintainers review it?

Sorry I missed it, but the subject line was a bit misleading.  The
patch is fine.  However, the PPC already has a way of selecting the
default CPU (and thus scheduling etc) with a configure option and
config.gcc.  Did you look at that mechanism before implementing this
one?

And I predict that at some point in the future, there will be a thread
about how all those defines in config.gcc are cluttering up the
script, and why can't we put them all in target-specific headers?

Re: Patch: Use tm_defines to configure default scheduling model on PA

[John David Anglin]

> Sorry I missed it, but the subject line was a bit misleading.  The
> patch is fine.  However, the PPC already has a way of selecting the
> default CPU (and thus scheduling etc) with a configure option and
> config.gcc.  Did you look at that mechanism before implementing this
> one?

I did but I will look more closely at what ppc has done.

> And I predict that at some point in the future, there will be a thread
> about how all those defines in config.gcc are cluttering up the
> script, and why can't we put them all in target-specific headers?

The goal here was to eliminate small target-specific headers and provide
a mechanism for selecting target options in the configuration process.
At the moment, mkconfig.sh outputs DEFINES after HEADERS.  I would
argue that we should output DEFINES first so that they can be used
to select build, host and target options in HEADERS and other code
that includes the various config files.  Placing the defines first
allows defaults in the headers to be overriden.

There were a number of comments after I submitted the patch that
indicated the number of target-specific headers in the i386 config
was too large and the inclusion process difficult to follow.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Patch: Use tm_defines to configure default scheduling model on PA

[DJ Delorie]

> that includes the various config files.  Placing the defines first
> allows defaults in the headers to be overriden.

Placing defines after allows you to redefine something with a simple
undef/define, without the main header needing to know that you're
doing it.  There are cases that argue both ways, though.

> There were a number of comments after I submitted the patch that
> indicated the number of target-specific headers in the i386 config
> was too large and the inclusion process difficult to follow.

The complexity has to go somewhere ;)

Re: Patch: Use tm_defines to configure default scheduling model on PA

[John David Anglin]

> > that includes the various config files.  Placing the defines first
> > allows defaults in the headers to be overriden.
> 
> Placing defines after allows you to redefine something with a simple
> undef/define, without the main header needing to know that you're
> doing it.  There are cases that argue both ways, though.

How does that work?  mkconfig.sh doesn't do undef's.

Although mkconfig.sh could be modified to undef/define when necessary,
I still think it better to put the defines first because the headers
may contain secondary defines based on the identifier that you want
to redefine.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Patch: Use tm_defines to configure default scheduling model on PA

[DJ Delorie]

> How does that work?  mkconfig.sh doesn't do undef's.

I didn't say it would work, but it's a technique we use elsewhere.

> I still think it better to put the defines first because the headers
> may contain secondary defines based on the identifier that you want
> to redefine.

Consider, for example, this from i386/cygwin.h:

/* For Win32 ABI compatibility */
#undef DEFAULT_PCC_STRUCT_RETURN
#define DEFAULT_PCC_STRUCT_RETURN 0

To do this with defines before includes, you'd need to put a #ifdef
around *every single* define in *every* header file, because you won't
know which will be overridden by targets.

Re: Patch: Use tm_defines to configure default scheduling model on PA

[John David Anglin]

> > I still think it better to put the defines first because the headers
> > may contain secondary defines based on the identifier that you want
> > to redefine.
> 
> Consider, for example, this from i386/cygwin.h:
> 
> /* For Win32 ABI compatibility */
> #undef DEFAULT_PCC_STRUCT_RETURN
> #define DEFAULT_PCC_STRUCT_RETURN 0
> 
> To do this with defines before includes, you'd need to put a #ifdef
> around *every single* define in *every* header file, because you won't
> know which will be overridden by targets.

Yes.  However, it's not reasonable to define the entire cygwin configuration
in configure.  If configure checked how to define DEFAULT_PCC_STRUCT_RETURN
then I would say it has a place in configure, and that there should be
a way independent of include files to override the default define.  I
agree that in some cases putting the defines after the headers is simpler
and avoids the ifdef burden, however you loose some flexibility in what
the headers can do.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Patch: Use tm_defines to configure default scheduling model on PA

[John David Anglin]

> Sorry I missed it, but the subject line was a bit misleading.  The
> patch is fine.  However, the PPC already has a way of selecting the
> default CPU (and thus scheduling etc) with a configure option and
> config.gcc.  Did you look at that mechanism before implementing this
> one?

The mechanism involves setting flag bits in TARGET_CPU_DEFAULT.  This could
be done but then there would be no way for a user to fine tune the default
scheduling model selected by configure except by hacking config.gcc. One
of the goals of the patch was to enable the user to set TARGET_SCHED_DEFAULT
in BOOT_CFLAGS.

TARGET_CPU_DEFAULT involves a collection of miscellaneous flag bits that
get merged in a rather complex manner in the configuration process to produce
the define output at the beginning of the various *config.h files.  This
define is not protected by a ifndef so it's not currently possible for
a user to override it in BOOT_CFLAGS.

Setting the PA architecture bits in TARGET_CPU_DEFAULT is currently a problem.
The default is still PA 1.1 even on PA 2.0 machines.  I plan to make some
changes in this area in the near future after a bug in GAS affecting level
2.0 code is fixed for elf32.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [PATCH/RFA] Allow register other than SP for DWARF2 CFA

[John David Anglin]

> Thanks.  I give it a try asap.  However, it looks like casesi is
> broken on vax.  An abort occurs in stage1 running gengenrtl.

Actually, stage2.  We lose the jump table in the bbro pass.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATH: inline does not work with -O3 specified

[Herman ten Brugge]

herman wrote :
> 
> Hello,
> 
> I notieced a problem in the current mainline release. The inlining does not
> work when -O3 specified. The typo is in c-common.c (See patch below).
> I do not have write permission so can not make the change after aproval.
> 

Oops. This is wrong. The correct fix is below. I alos forgot to mention
that this did not work for the c4x target.
I do not have write permission so can not make the change after aproval.

	Herman.



2002-24-06 Herman A.J. ten Brugge <Haj.Ten.Brugge@net.HCC.nl>

        * c4x.h: (TARGET_CPU_CPP_BUILTINS): Check flag_inline_functions and
	flag_inline_trees to enable inlining.


--- c4x.h.org	Mon Jun 24 21:37:52 2002
+++ c4x.h	Mon Jun 24 21:38:20 2002
@@ -35,7 +35,8 @@
 	builtin_define ("_BIGMODEL");		\
       if (!TARGET_MEMPARM)			\
 	builtin_define ("_REGPARM");		\
-      if (flag_inline_functions)		\
+      if (flag_inline_functions			\
+	  || flag_inline_trees)			\
 	builtin_define ("_INLINE");		\
       if (TARGET_C3X)				\
 	{					\

Re: PATH: inline does not work with -O3 specified

[Michael Hayes]

Herman ten Brugge writes:
 > Oops. This is wrong. The correct fix is below. I alos forgot to mention
 > that this did not work for the c4x target.
 > I do not have write permission so can not make the change after aproval.

I installed this for the c4x target thanks Herman.

Michael.

Re: PATCH: Fix failure of arith-rand-ll.c on hppa 32-bit targets

[John David Anglin]

> After installing this patch, I realized that the predicate for the adddi3
> expander can be improved rather than forcing constants that don't fit
> into a register.

Here is the patch.  Tested on hppa-linux, hppa2.0w-hp-hpux11.11
and hppa64-hp-hpux11.11.  Applied to main.  A combined version of
this patch and the previous patch has been applied to the 3.1
branch.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-07-11  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* pa.md (adddi3): Change predicate of operand 2 to adddi3_operand
	and delete code to force constant to register.
	* pa-protos.h (adddi3_operand): Add prototype.
	* pa.c (adddi3_operand): New function.

Index: config/pa/pa.md
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.md,v
retrieving revision 1.108
diff -u -3 -p -r1.108 pa.md
--- config/pa/pa.md	11 Jul 2002 05:04:54 -0000	1.108
+++ config/pa/pa.md	11 Jul 2002 15:57:30 -0000
@@ -3813,15 +3813,9 @@
 (define_expand "adddi3"
   [(set (match_operand:DI 0 "register_operand" "")
 	(plus:DI (match_operand:DI 1 "register_operand" "")
-		 (match_operand:DI 2 "arith_operand" "")))]
+		 (match_operand:DI 2 "adddi3_operand" "")))]
   ""
-  "
-{
-  if (!TARGET_64BIT
-      && GET_CODE (operands[2]) == CONST_INT
-      && !VAL_11_BITS_P (INTVAL (operands[2])))
-    operands[2] = force_reg (DImode, operands[2]);
-}")
+  "")
 
 (define_insn ""
   [(set (match_operand:DI 0 "register_operand" "=r")
Index: config/pa/pa-protos.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa-protos.h,v
retrieving revision 1.14
diff -u -3 -p -r1.14 pa-protos.h
--- config/pa/pa-protos.h	21 Jun 2002 01:37:47 -0000	1.14
+++ config/pa/pa-protos.h	11 Jul 2002 15:57:30 -0000
@@ -63,6 +63,7 @@ extern rtx legitimize_pic_address PARAMS
 extern struct rtx_def *gen_cmp_fp PARAMS ((enum rtx_code, rtx, rtx));
 extern void hppa_encode_label PARAMS ((rtx));
 extern int arith11_operand PARAMS ((rtx, enum machine_mode));
+extern int adddi3_operand PARAMS ((rtx, enum machine_mode));
 extern int symbolic_expression_p PARAMS ((rtx));
 extern int hppa_address_cost PARAMS ((rtx));
 extern int symbolic_memory_operand PARAMS ((rtx, enum machine_mode));
Index: config/pa/pa.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.c,v
retrieving revision 1.171
diff -u -3 -p -r1.171 pa.c
--- config/pa/pa.c	11 Jul 2002 05:04:55 -0000	1.171
+++ config/pa/pa.c	11 Jul 2002 15:57:31 -0000
@@ -578,6 +578,18 @@ arith11_operand (op, mode)
 	  || (GET_CODE (op) == CONST_INT && INT_11_BITS (op)));
 }
 
+/* Return truth value of whether OP can be used as an operand in a
+   adddi3 insn.  */
+int
+adddi3_operand (op, mode)
+     rtx op;
+     enum machine_mode mode;
+{
+  return (register_operand (op, mode)
+	  || (GET_CODE (op) == CONST_INT
+	      && (TARGET_64BIT ? INT_14_BITS (op) : INT_11_BITS (op))));
+}
+
 /* A constant integer suitable for use in a PRE_MODIFY memory
    reference.  */
 int

Re: [RFA] Fix libsupc++/Makefile.in

[John David Anglin]

> I belive that this patch has broken the v3 build under hppa-linux
> and likely for other hppa ports.  This libsupc++ library gets linked
> against the share v3 lib, thus all compilations need to be pic on hppa.
> I believe "-prefer-pic" was part of the C++ flags.  So, we now need
> it in the C flags.

Here's a quick fix.  Tested on hppa-linux.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-08-02  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* libsupc++/Makefile.am (LTCOMPILE): Add LIBSUPCXX_PICFLAGS.

Index: libsupc++/Makefile.am
===================================================================
RCS file: /cvsroot/gcc/gcc/libstdc++-v3/libsupc++/Makefile.am,v
retrieving revision 1.34
diff -u -3 -p -r1.34 Makefile.am
--- libsupc++/Makefile.am	1 Aug 2002 22:16:46 -0000	1.34
+++ libsupc++/Makefile.am	3 Aug 2002 04:29:29 -0000
@@ -126,7 +126,7 @@ dyn-string.o: dyn-string.c
 
 # LTCOMPILE is copied from LTCXXCOMPILE below.
 LTCOMPILE = $(LIBTOOL) --tag CC --tag disable-shared --mode=compile $(CC) \
-	    $(DEFS) $(GCC_INCLUDES) \
+	    $(DEFS) $(GCC_INCLUDES) $(LIBSUPCXX_PICFLAGS) \
             $(AM_CPPFLAGS) $(CPPFLAGS) 
 
 

Re: [RFA] Fix libsupc++/Makefile.in

[Neil Booth]

John David Anglin wrote:-

> Here's a quick fix.  Tested on hppa-linux.

Thanks John!

Neil.

PATCH: fix warning and return value for remove_dup_nonsys_dirs

[John David Anglin]

> Installed!  I suggest waiting a few days to see if the change causes
> any problems before considering the branch.  I will work up something
> for the relevant changes.html(s).

I don't know how I missed this.  The return value of remove_dup_nonsys_dirs
isn't correct if there are no system directories.  The enclosed patch
fixes the problem.

Tested with a bootstrap and check on hppa-linux with no regressions.

OK for main?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-08-21  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* cppinit.c (remove_dup_nonsys_dirs): Fix warning and return value.

Index: cppinit.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/cppinit.c,v
retrieving revision 1.259
diff -u -3 -p -r1.259 cppinit.c
--- cppinit.c	20 Aug 2002 19:56:29 -0000	1.259
+++ cppinit.c	21 Aug 2002 16:04:16 -0000
@@ -303,12 +303,14 @@ remove_dup_nonsys_dirs (pfile, head_ptr,
      struct search_path **head_ptr;
      struct search_path *end;
 {
-  struct search_path *prev, *cur, *other;
+  int sysdir = 0;
+  struct search_path *prev = NULL, *cur, *other;
 
   for (cur = *head_ptr; cur; cur = cur->next)
     {
       if (cur->sysp)
 	{
+	  sysdir = 1;
 	  for (other = *head_ptr, prev = NULL;
 	       other != end;
 	       other = other ? other->next : *head_ptr)
@@ -326,6 +328,10 @@ remove_dup_nonsys_dirs (pfile, head_ptr,
 	    }
 	}
     }
+
+  if (!sysdir)
+    for (cur = *head_ptr; cur != end; cur = cur->next)
+      prev = cur;
 
   return prev;
 }

Re: PATCH: fix warning and return value for remove_dup_nonsys_dirs

[Zack Weinberg]

On Wed, Aug 21, 2002 at 12:23:50PM -0400, John David Anglin wrote:
> > Installed!  I suggest waiting a few days to see if the change causes
> > any problems before considering the branch.  I will work up something
> > for the relevant changes.html(s).
> 
> I don't know how I missed this.  The return value of remove_dup_nonsys_dirs
> isn't correct if there are no system directories.  The enclosed patch
> fixes the problem.
> 
> Tested with a bootstrap and check on hppa-linux with no regressions.
> 
> OK for main?

Yes.

zw

Re: 128 bit floats on PA64

[John David Anglin]

> The following compiles your test ok.  I have a full bootstrap in
> progress.  I'm still not completely happy with the comment but
> I think it is more or less explains why we don't want SImode values
> changed to a wider mode.

There is one new testsuite failure.  The test execute/20010605-2.c
seg faults in function baz.  It looks as if the dp register has been
messed up.  We are trying to pass a complex long double.

This is the last part of the baz call:

        ldd 112(%r3),%r25
	ldd 120(%r3),%r26
	ldd 128(%r3),%r27 <== dp clobbered
	ldd 136(%r3),%r28
	ldo -16(%r30),%r29
	b,l baz,%r2
	nop

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Patch for PR c/4319

[John David Anglin]

> I don't completely understand why I didn't see this earlier but
> gcc.dg/typespec-1.c now fails in over a 100 places on hppa64-hp-hpux11.00.
> I first observed this in a build last night, but 3.2 doesn't warn or
> generate an error for the following as well, even with -pedantic:
> 
>   char short *x23;
> 
> Looking at c-decl.c, I see that explicit_char is 1 for this case, so
> the change that you made doesn't generate an error for "char short".

On further investigation, it appears that grokdeclarator has been
miscompiled.  For some reason, when specbits is set, it appears to
be treated as a "long" (i.e., ldd/std are used to load and store the
value).  However, when it is tested, it seems to be treated as an
int (i.e., ldw/stw are used).  This mixup causes the type checks
to fail.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH for sibcalls on i386

[John David Anglin]

> > the sibcall machinery, and is independent of it.  It should
> > not be shut off by FUNCTION_OK_FOR_SIBCALL.
> 
> The main difference between the 32-bit ports (e.g., hppa-linux)
> and hppa64-hpux is that calls on hppa64-hpux always pass a pointer
> to the first argument on on the stack (arg8) as one of the arguments.
> Possibly, this is the reason that there is no sibcall.

This appears to be the reason why we don't get recursive tail calls
on hppa64-hpux.  sequence_uses_addressof returns nonzero because
current_function_internal_arg_pointer is found.  This causes
no_sibcalls_this_function to be set.  Thus, I think that all the
sibcall tests need to be xfailed for this target.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [PATCH] Inline __udiv_w_sdiv into __divdi3 etc.

[John David Anglin]

> On hppa-linux, it looks as if this patch causes a bootstrap failure:
> 
> > On Mon, Oct 21, 2002 at 10:04:36PM +0200, Ulrich Weigand wrote:
> > >       * libgcc2.c: Inline __udiv_w_sdiv when compiling __udivdi3,
> > >       __divdi3, __umoddi3, or __moddi3.
> > 
> > Ok.

It also fails on hppa64-hp-hpux11.11:

stage1/xgcc -Bstage1/ -B/opt/gnu64/hppa64-hp-hpux11.11/bin/   -g -O2 -mlong-calls -DIN_GCC   -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long -fno-common  -DHAVE_CONFIG_H -DGENERATOR_FILE  -o genattrtab \
 genattrtab.o genautomata.o \
 rtl.o read-rtl.o bitmap.o ggc-none.o gensupport.o insn-conditions.o print-rtl1.o errors.o \
 varray.o ../libiberty/libiberty.a -lm
ld: Duplicate symbol "__udiv_w_sdiv" in files stage1/libgcc.a[_udivdi3.o] and stage1/libgcc.a[_umoddi3.o]

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[John David Anglin]

> This problem is probably hidden when the arg pointer can be
> eliminated as the stack or frame pointer is used instead.  However,
> we can't eliminate it on hppa64 because the outgoing arg pointer in
> a function call is set based on the cumulative size of the outgoing
> args of the callee and this varies from one callee to another.

That should be caller, not callee.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[John David Anglin]

> I did see a small but consistent improvement in the running time
> of genattrtab with sibcalls enabled.  I don't know where this arises
> but I doubt it is from any saving in the call sequence itself.
> There are small differences in how the delay slot is used.  For
> regular calls, we use a branch and link, and for sibcalls, we just
> branch.  That's the sum of the differences as I see it.

I just rechecked the above.  With the only change being the value for
FUNCTION_OK_FOR_SIBCALL, the times for genattrtab on an a500 running
hppa64-hp-hpux11.11 with the call rewrite were 13.24 seconds with
sibcalls and 13.71 seconds without sibcalls, respectively.  These
numbers are consistent with what I measured using an earlier version
of the patch.  I think the 3 percent improvement is worthwhile.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Jeff Law]

In message <200210242326.g9ONQkob027212@hiauly1.hia.nrc.ca>, "John David Anglin
" writes:
 >> I did see a small but consistent improvement in the running time
 >> of genattrtab with sibcalls enabled.  I don't know where this arises
 >> but I doubt it is from any saving in the call sequence itself.
 >> There are small differences in how the delay slot is used.  For
 >> regular calls, we use a branch and link, and for sibcalls, we just
 >> branch.  That's the sum of the differences as I see it.
 >
 >I just rechecked the above.  With the only change being the value for
 >FUNCTION_OK_FOR_SIBCALL, the times for genattrtab on an a500 running
 >hppa64-hp-hpux11.11 with the call rewrite were 13.24 seconds with
 >sibcalls and 13.71 seconds without sibcalls, respectively.  These
 >numbers are consistent with what I measured using an earlier version
 >of the patch.  I think the 3 percent improvement is worthwhile.
Definitely worthwhile.

It's possible the improvements are on the return path side -- by returning
to the caller's parent rather than the caller itself, we avoid one hard
to predict branch (the "bv" in the caller) and maybe one easy to predict
branch (branch to the epilogue).  

jeff

Re: Reload patch for PA call rewrite.

[John David Anglin]

> It's possible the improvements are on the return path side -- by returning
> to the caller's parent rather than the caller itself, we avoid one hard
> to predict branch (the "bv" in the caller) and maybe one easy to predict
> branch (branch to the epilogue).  

Yes, I can see that returns are hard to predict since they are indirect
and we save one with the sibcall.  We definitely should implement the BTS
for returns.

I tried the same test on hppa-linux and there wasn't any difference in
the timing with and without sibcalls.  I'm going to try 32-bit hpux.
Possibly, there is a linux/hpux difference.  Possibly, there is a
difference wrt the P bit in the ITLB between these systems.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Call rewrite for PA

[John David Anglin]

The following patch has been applied to the main.  It contains everything
but the revised arg pointer handling proposed for hppa64.  This patch fixes
a number of bugs in the handling of long calls as previously discussed
and moves the length computation for millicode and regular calls from
pa.md to pa.c.

This version has been tested on hppa64-hp-hpux11.11 and hppa-unknown-linux-gnu.
Applied

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-10-30  John David Anglin  <dave@hiauly.hia.nrc.ca>

	* pa-linux.h (ASM_OUTPUT_EXTERNAL_LIBCALL): Define.
	* pa-protos.h (attr_length_millicode_call, attr_length_call,
	pa_init_machine_status): Declare new global functions.
	* pa.c (void copy_fp_args, length_fp_args, get_plabel): Declare and
	implement new functions.
	(attr_length_millicode_call, attr_length_call): Implement.
	(total_code_bytes): Change type to long.
	(pa_output_function_prologue): Compute total_code_bytes on TARGET_64BIT.
	Reset counter if flag_function_sections.
	(output_deferred_plabels): Set output alignment to 3 for TARGET_64BIT.
	(output_cbranch): Move call to gen_label_rtx.
	(output_millicode_call): Rewrite adding long TARGET_64BIT call, expose
	delay slot in all variants, shorten pc-relative calls.
	(output_call): Rewrite adding long TARGET_64BIT call, improved delay
	slot usage and exposure, various new call variants, and shortened
	sequences for some variants on TARGET_PA_20.
	Miscellaneous format changes.
	* pa.h (total_code_bytes): Change type to long.
	(MASK_LONG_CALLS, TARGET_LONG_CALLS, TARGET_LONG_ABS_CALL,
	TARGET_LONG_PIC_SDIFF_CALL, TARGET_LONG_PIC_PCREL_CALL): Define.
	(TARGET_SWITCHES): Add "-mlong-calls" and "-mno-long-calls" options.
	(EXTRA_CONSTRAINT, GO_IF_LEGITIMATE_ADDRESS,
	LEGITIMIZE_RELOAD_ADDRESS): Don't use long floating point loads and
	stores on TARGET_ELF32.
	*pa.md (define_delay): Allow insns in delay on TARGET_PORTABLE_RUNTIME.
	(unnamed patterns for mulsi3, divsi3, udivsi3, modsi3, umodsi3 and
	canonicalize_funcptr_for_compare expanders): Calculate attribute length
	attr_length_millicode_call().
	(call_internal_symref, call_value_internal_symref): Clobber register 1.
	Calculate attribute length using attr_length_call().
	(call_internal_reg_64bit, call_value_internal_reg_64bit): Move gp load
	to delay slot.
	(sibcall, sibcall_value): Rewrite.
	(sibcall_internal_symref, sibcall_value_internal_symref): Clobber
	register 1.  Use attr_length_call().
	(sibcall_internal_symref_64bit, sibcall_value_internal_symref_64bit):
	New patterns.
	(unamed pattern for canonicalize_funcptr_for_compare): Rewrite.
	* som.h (MEMBER_TYPE_FORCES_BLK): Define.
	* t-pa64 (TARGET_LIBGCC2_CFLAGS): Add "-mlong-calls".
	* doc/invoke.texi (mlong-calls): Document.

Index: config/pa/pa-linux.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa-linux.h,v
retrieving revision 1.26
diff -u -3 -p -r1.26 pa-linux.h
--- config/pa/pa-linux.h	3 Oct 2002 04:05:54 -0000	1.26
+++ config/pa/pa-linux.h	30 Oct 2002 17:06:37 -0000
@@ -196,6 +196,19 @@ Boston, MA 02111-1307, USA.  */
     }								\
   while (0)
 
+/* As well as globalizing the label, we need to encode the label
+   to ensure a plabel is generated in an indirect call.  */
+
+#undef ASM_OUTPUT_EXTERNAL_LIBCALL
+#define ASM_OUTPUT_EXTERNAL_LIBCALL(FILE, FUN)  		\
+  do								\
+    {								\
+      if (!FUNCTION_NAME_P (XSTR (FUN, 0)))			\
+	hppa_encode_label (FUN);				\
+      (*targetm.asm_out.globalize_label) (FILE, XSTR (FUN, 0));	\
+    }								\
+  while (0)
+
 /* Linux always uses gas.  */
 #undef TARGET_GAS
 #define TARGET_GAS 1
Index: config/pa/pa-protos.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa-protos.h,v
retrieving revision 1.18
diff -u -3 -p -r1.18 pa-protos.h
--- config/pa/pa-protos.h	20 Oct 2002 22:37:12 -0000	1.18
+++ config/pa/pa-protos.h	30 Oct 2002 17:06:37 -0000
@@ -105,6 +105,8 @@ extern int jump_in_call_delay PARAMS ((r
 extern enum reg_class secondary_reload_class PARAMS ((enum reg_class,
 						      enum machine_mode, rtx));
 extern int hppa_fpstore_bypass_p PARAMS ((rtx, rtx));
+extern int attr_length_millicode_call PARAMS ((rtx, int));
+extern int attr_length_call PARAMS ((rtx, int));
 
 /* Declare functions defined in pa.c and used in templates.  */
 
Index: config/pa/pa.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.c,v
retrieving revision 1.184
diff -u -3 -p -r1.184 pa.c
--- config/pa/pa.c	22 Oct 2002 23:05:19 -0000	1.184
+++ config/pa/pa.c	30 Oct 2002 17:06:42 -0000
@@ -121,11 +121,13 @@ static void pa_globalize_label PARAMS ((
      ATTRIBUTE_UNUSED;
 static void pa_asm_output_mi_thunk PARAMS ((FILE *, tree, HOST_WIDE_INT,
 					    HOST_WIDE_INT, tree));
-
+static void copy_fp_args PARAMS ((rtx)) ATTRIBUTE_UNUSED;
+static int length_fp_args PARAMS ((rtx)) ATTRIBUTE_UNUSED;
+static struct deferred_plabel *get_plabel PARAMS ((const char *))
+     ATTRIBUTE_UNUSED;
 
 /* Save the operands last given to a compare for use when we
    generate a scc or bcc insn.  */
-
 rtx hppa_compare_op0, hppa_compare_op1;
 enum cmp_type hppa_branch_type;
 
@@ -149,12 +151,10 @@ static rtx find_addr_reg PARAMS ((rtx));
 
 /* Keep track of the number of bytes we have output in the CODE subspaces
    during this compilation so we'll know when to emit inline long-calls.  */
-
-unsigned int total_code_bytes;
+unsigned long total_code_bytes;
 
 /* Variables to handle plabels that we discover are necessary at assembly
    output time.  They are output after the current function.  */
-
 struct deferred_plabel GTY(())
 {
   rtx internal_label;
@@ -3197,14 +3197,14 @@ pa_output_function_prologue (file, size)
   fputs ("\n\t.ENTRY\n", file);
 
   /* If we're using GAS and SOM, and not using the portable runtime model,
-     then we don't need to accumulate the total number of code bytes.  */
+     or function sections, then we don't need to accumulate the total number
+     of code bytes.  */
   if ((TARGET_GAS && TARGET_SOM && ! TARGET_PORTABLE_RUNTIME)
-      /* FIXME: we can't handle long calls for TARGET_64BIT.  */
-      || TARGET_64BIT)
+      || flag_function_sections)
     total_code_bytes = 0;
   else if (INSN_ADDRESSES_SET_P ())
     {
-      unsigned int old_total = total_code_bytes;
+      unsigned long old_total = total_code_bytes;
 
       total_code_bytes += INSN_ADDRESSES (INSN_UID (get_last_nonnote_insn ()));
       total_code_bytes += FUNCTION_BOUNDARY / BITS_PER_UNIT;
@@ -4726,6 +4726,47 @@ output_global_address (file, x, round_co
     output_addr_const (file, x);
 }
 
+static struct deferred_plabel *
+get_plabel (fname)
+     const char *fname;
+{
+  size_t i;
+
+  /* See if we have already put this function on the list of deferred
+     plabels.  This list is generally small, so a liner search is not
+     too ugly.  If it proves too slow replace it with something faster.  */
+  for (i = 0; i < n_deferred_plabels; i++)
+    if (strcmp (fname, deferred_plabels[i].name) == 0)
+      break;
+
+  /* If the deferred plabel list is empty, or this entry was not found
+     on the list, create a new entry on the list.  */
+  if (deferred_plabels == NULL || i == n_deferred_plabels)
+    {
+      const char *real_name;
+
+      if (deferred_plabels == 0)
+	deferred_plabels = (struct deferred_plabel *)
+	  ggc_alloc (sizeof (struct deferred_plabel));
+      else
+	deferred_plabels = (struct deferred_plabel *)
+	  ggc_realloc (deferred_plabels,
+		       ((n_deferred_plabels + 1)
+			* sizeof (struct deferred_plabel)));
+
+      i = n_deferred_plabels++;
+      deferred_plabels[i].internal_label = gen_label_rtx ();
+      deferred_plabels[i].name = ggc_strdup (fname);
+
+      /* Gross.  We have just implicitly taken the address of this function,
+	 mark it as such.  */
+      real_name = (*targetm.strip_name_encoding) (fname);
+      TREE_SYMBOL_REFERENCED (get_identifier (real_name)) = 1;
+    }
+
+  return &deferred_plabels[i];
+}
+
 void
 output_deferred_plabels (file)
      FILE *file;
@@ -4737,7 +4778,7 @@ output_deferred_plabels (file)
   if (n_deferred_plabels)
     {
       data_section ();
-      ASM_OUTPUT_ALIGN (file, 2);
+      ASM_OUTPUT_ALIGN (file, TARGET_64BIT ? 3 : 2);
     }
 
   /* Now output the deferred plabels.  */
@@ -5323,9 +5364,9 @@ hppa_va_arg (valist, type)
 
 const char *
 output_cbranch (operands, nullify, length, negated, insn)
-  rtx *operands;
-  int nullify, length, negated;
-  rtx insn;
+     rtx *operands;
+     int nullify, length, negated;
+     rtx insn;
 {
   static char buf[100];
   int useskip = 0;
@@ -5499,12 +5540,11 @@ output_cbranch (operands, nullify, lengt
 	  xoperands[1] = operands[1];
 	  xoperands[2] = operands[2];
 	  xoperands[3] = operands[3];
-	  if (TARGET_SOM || ! TARGET_GAS)
-	    xoperands[4] = gen_label_rtx ();
 
 	  output_asm_insn ("{bl|b,l} .+8,%%r1", xoperands);
-	  if (TARGET_SOM || ! TARGET_GAS)
+	  if (TARGET_SOM || !TARGET_GAS)
 	    {
+	      xoperands[4] = gen_label_rtx ();
 	      output_asm_insn ("addil L'%l0-%l4,%%r1", xoperands);
 	      ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L",
 					 CODE_LABEL_NUMBER (xoperands[4]));
@@ -5536,10 +5576,10 @@ output_cbranch (operands, nullify, lengt
 
 const char *
 output_bb (operands, nullify, length, negated, insn, which)
-  rtx *operands ATTRIBUTE_UNUSED;
-  int nullify, length, negated;
-  rtx insn;
-  int which;
+     rtx *operands ATTRIBUTE_UNUSED;
+     int nullify, length, negated;
+     rtx insn;
+     int which;
 {
   static char buf[100];
   int useskip = 0;
@@ -5684,10 +5724,10 @@ output_bb (operands, nullify, length, ne
 
 const char *
 output_bvb (operands, nullify, length, negated, insn, which)
-  rtx *operands ATTRIBUTE_UNUSED;
-  int nullify, length, negated;
-  rtx insn;
-  int which;
+     rtx *operands ATTRIBUTE_UNUSED;
+     int nullify, length, negated;
+     rtx insn;
+     int which;
 {
   static char buf[100];
   int useskip = 0;
@@ -6043,442 +6083,594 @@ output_movb (operands, insn, which_alter
     }
 }
 
+/* Copy any FP arguments in INSN into integer registers.  */
+static void
+copy_fp_args (insn)
+     rtx insn;
+{
+  rtx link;
+  rtx xoperands[2];
 
-/* INSN is a millicode call.  It may have an unconditional jump in its delay
-   slot.
+  for (link = CALL_INSN_FUNCTION_USAGE (insn); link; link = XEXP (link, 1))
+    {
+      int arg_mode, regno;
+      rtx use = XEXP (link, 0);
 
-   CALL_DEST is the routine we are calling.  */
+      if (! (GET_CODE (use) == USE
+	  && GET_CODE (XEXP (use, 0)) == REG
+	  && FUNCTION_ARG_REGNO_P (REGNO (XEXP (use, 0)))))
+	continue;
 
-const char *
-output_millicode_call (insn, call_dest)
-  rtx insn;
-  rtx call_dest;
-{
-  int attr_length = get_attr_length (insn);
-  int seq_length = dbr_sequence_length ();
-  int distance;
-  rtx xoperands[4];
-  rtx seq_insn;
+      arg_mode = GET_MODE (XEXP (use, 0));
+      regno = REGNO (XEXP (use, 0));
 
-  xoperands[3] = gen_rtx_REG (Pmode, TARGET_64BIT ? 2 : 31);
+      /* Is it a floating point register?  */
+      if (regno >= 32 && regno <= 39)
+	{
+	  /* Copy the FP register into an integer register via memory.  */
+	  if (arg_mode == SFmode)
+	    {
+	      xoperands[0] = XEXP (use, 0);
+	      xoperands[1] = gen_rtx_REG (SImode, 26 - (regno - 32) / 2);
+	      output_asm_insn ("{fstws|fstw} %0,-16(%%sr0,%%r30)", xoperands);
+	      output_asm_insn ("ldw -16(%%sr0,%%r30),%1", xoperands);
+	    }
+	  else
+	    {
+	      xoperands[0] = XEXP (use, 0);
+	      xoperands[1] = gen_rtx_REG (DImode, 25 - (regno - 34) / 2);
+	      output_asm_insn ("{fstds|fstd} %0,-16(%%sr0,%%r30)", xoperands);
+	      output_asm_insn ("ldw -12(%%sr0,%%r30),%R1", xoperands);
+	      output_asm_insn ("ldw -16(%%sr0,%%r30),%1", xoperands);
+	    }
+	}
+    }
+}
+
+/* Compute length of the FP argument copy sequence for INSN.  */
+static int
+length_fp_args (insn)
+     rtx insn;
+{
+  int length = 0;
+  rtx link;
 
-  /* Handle common case -- empty delay slot or no jump in the delay slot,
-     and we're sure that the branch will reach the beginning of the $CODE$
-     subspace.  The within reach form of the $$sh_func_adrs call has
-     a length of 28 and attribute type of multi.  This length is the
-     same as the maximum length of an out of reach PIC call to $$div.  */
-  if ((seq_length == 0
-       && (attr_length == 8
-	   || (attr_length == 28 && get_attr_type (insn) == TYPE_MULTI)))
-      || (seq_length != 0
-	  && GET_CODE (NEXT_INSN (insn)) != JUMP_INSN
-	  && attr_length == 4))
+  for (link = CALL_INSN_FUNCTION_USAGE (insn); link; link = XEXP (link, 1))
     {
-      xoperands[0] = call_dest;
-      output_asm_insn ("{bl|b,l} %0,%3%#", xoperands);
-      return "";
+      int arg_mode, regno;
+      rtx use = XEXP (link, 0);
+
+      if (! (GET_CODE (use) == USE
+	  && GET_CODE (XEXP (use, 0)) == REG
+	  && FUNCTION_ARG_REGNO_P (REGNO (XEXP (use, 0)))))
+	continue;
+
+      arg_mode = GET_MODE (XEXP (use, 0));
+      regno = REGNO (XEXP (use, 0));
+
+      /* Is it a floating point register?  */
+      if (regno >= 32 && regno <= 39)
+	{
+	  if (arg_mode == SFmode)
+	    length += 8;
+	  else
+	    length += 12;
+	}
     }
 
-  /* This call may not reach the beginning of the $CODE$ subspace.  */
-  if (attr_length > 8)
+  return length;
+}
+
+/* We include the delay slot in the returned length as it is better to
+   over estimate the length than to under estimate it.  */
+
+int
+attr_length_millicode_call (insn, length)
+     rtx insn;
+     int length;
+{
+  unsigned long distance = total_code_bytes + INSN_ADDRESSES (INSN_UID (insn));
+
+  if (distance < total_code_bytes)
+    distance = -1;
+
+  if (TARGET_64BIT)
     {
-      int delay_insn_deleted = 0;
+      if (!TARGET_LONG_CALLS && distance < 7600000)
+	return length + 8;
 
-      /* We need to emit an inline long-call branch.  */
-      if (seq_length != 0
-	  && GET_CODE (NEXT_INSN (insn)) != JUMP_INSN)
-	{
-	  /* A non-jump insn in the delay slot.  By definition we can
-	     emit this insn before the call.  */
-	  final_scan_insn (NEXT_INSN (insn), asm_out_file, optimize, 0, 0);
+      return length + 20;
+    }
+  else if (TARGET_PORTABLE_RUNTIME)
+    return length + 24;
+  else
+    {
+      if (!TARGET_LONG_CALLS && distance < 240000)
+	return length + 8;
 
-	  /* Now delete the delay insn.  */
-	  PUT_CODE (NEXT_INSN (insn), NOTE);
-	  NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
-	  NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
-	  delay_insn_deleted = 1;
-	}
+      if (TARGET_LONG_ABS_CALL && !flag_pic)
+	return length + 12;
 
-      /* PIC long millicode call sequence.  */
-      if (flag_pic)
-	{
-	  xoperands[0] = call_dest;
-	  if (TARGET_SOM || ! TARGET_GAS)
-	    xoperands[1] = gen_label_rtx ();
+      return length + 24;
+    }
+}
 
-	  /* Get our address + 8 into %r1.  */
-	  output_asm_insn ("{bl|b,l} .+8,%%r1", xoperands);
+/* INSN is a function call.  It may have an unconditional jump
+   in its delay slot.
 
-	  if (TARGET_SOM || ! TARGET_GAS)
-	    {
-	      /* Add %r1 to the offset of our target from the next insn.  */
-	      output_asm_insn ("addil L%%%0-%1,%%r1", xoperands);
-	      ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L",
-					 CODE_LABEL_NUMBER (xoperands[1]));
-	      output_asm_insn ("ldo R%%%0-%1(%%r1),%%r1", xoperands);
-	    }
-	  else
-	    {
-	      output_asm_insn ("addil L%%%0-$PIC_pcrel$0+4,%%r1", xoperands);
-	      output_asm_insn ("ldo R%%%0-$PIC_pcrel$0+8(%%r1),%%r1",
-			       xoperands);
-	    }
+   CALL_DEST is the routine we are calling.  */
 
-	  /* Get the return address into %r31.  */
-	  output_asm_insn ("blr 0,%3", xoperands);
+const char *
+output_millicode_call (insn, call_dest)
+     rtx insn;
+     rtx call_dest;
+{
+  int attr_length = get_attr_length (insn);
+  int seq_length = dbr_sequence_length ();
+  int distance;
+  rtx seq_insn;
+  rtx xoperands[3];
 
-	  /* Branch to our target which is in %r1.  */
-	  output_asm_insn ("bv,n %%r0(%%r1)", xoperands);
+  xoperands[0] = call_dest;
+  xoperands[2] = gen_rtx_REG (Pmode, TARGET_64BIT ? 2 : 31);
 
-	  /* Empty delay slot.  Note this insn gets fetched twice and
-	     executed once.  To be safe we use a nop.  */
-	  output_asm_insn ("nop", xoperands);
+  /* Handle the common case where we are sure that the branch will
+     reach the beginning of the $CODE$ subspace.  The within reach
+     form of the $$sh_func_adrs call has a length of 28.  Because
+     it has an attribute type of multi, it never has a non-zero
+     sequence length.  The length of the $$sh_func_adrs is the same
+     as certain out of reach PIC calls to other routines.  */
+  if (!TARGET_LONG_CALLS
+      && ((seq_length == 0
+	   && (attr_length == 12
+	       || (attr_length == 28 && get_attr_type (insn) == TYPE_MULTI)))
+	  || (seq_length != 0 && attr_length == 8)))
+    {
+      output_asm_insn ("{bl|b,l} %0,%2", xoperands);
+    }
+  else
+    {
+      if (TARGET_64BIT)
+	{
+	  /* It might seem that one insn could be saved by accessing
+	     the millicode function using the linkage table.  However,
+	     this doesn't work in shared libraries and other dynamically
+	     loaded objects.  Using a pc-relative sequence also avoids
+	     problems related to the implicit use of the gp register.  */
+	  output_asm_insn ("b,l .+8,%%r1", xoperands);
+	  output_asm_insn ("addil L'%0-$PIC_pcrel$0+4,%%r1", xoperands);
+	  output_asm_insn ("ldo R'%0-$PIC_pcrel$0+8(%%r1),%%r1", xoperands);
+	  output_asm_insn ("bve,l (%%r1),%%r2", xoperands);
 	}
-      /* Pure portable runtime doesn't allow be/ble; we also don't have
-	 PIC support in the assembler/linker, so this sequence is needed.  */
       else if (TARGET_PORTABLE_RUNTIME)
 	{
-	  xoperands[0] = call_dest;
-	  /* Get the address of our target into %r29.  */
-	  output_asm_insn ("ldil L%%%0,%%r29", xoperands);
-	  output_asm_insn ("ldo R%%%0(%%r29),%%r29", xoperands);
+	  /* Pure portable runtime doesn't allow be/ble; we also don't
+	     have PIC support in the assembler/linker, so this sequence
+	     is needed.  */
+
+	  /* Get the address of our target into %r1.  */
+	  output_asm_insn ("ldil L'%0,%%r1", xoperands);
+	  output_asm_insn ("ldo R'%0(%%r1),%%r1", xoperands);
 
 	  /* Get our return address into %r31.  */
-	  output_asm_insn ("blr %%r0,%3", xoperands);
+	  output_asm_insn ("{bl|b,l} .+8,%%r31", xoperands);
+	  output_asm_insn ("addi 8,%%r31,%%r31", xoperands);
 
-	  /* Jump to our target address in %r29.  */
-	  output_asm_insn ("bv,n %%r0(%%r29)", xoperands);
-
-	  /* Empty delay slot.  Note this insn gets fetched twice and
-	     executed once.  To be safe we use a nop.  */
-	  output_asm_insn ("nop", xoperands);
+	  /* Jump to our target address in %r1.  */
+	  output_asm_insn ("bv %%r0(%%r1)", xoperands);
 	}
-      /* If we're allowed to use be/ble instructions, then this is the
-	 best sequence to use for a long millicode call.  */
-      else
+      else if (!flag_pic)
 	{
-	  xoperands[0] = call_dest;
-	  output_asm_insn ("ldil L%%%0,%3", xoperands);
+	  output_asm_insn ("ldil L'%0,%%r1", xoperands);
 	  if (TARGET_PA_20)
-	    output_asm_insn ("be,l R%%%0(%%sr4,%3),%%sr0,%%r31", xoperands);
+	    output_asm_insn ("be,l R'%0(%%sr4,%%r1),%%sr0,%%r31", xoperands);
 	  else
-	    output_asm_insn ("ble R%%%0(%%sr4,%3)", xoperands);
-	  output_asm_insn ("nop", xoperands);
+	    output_asm_insn ("ble R'%0(%%sr4,%%r1)", xoperands);
 	}
-
-      /* If we had a jump in the call's delay slot, output it now.  */
-      if (seq_length != 0 && !delay_insn_deleted)
+      else
 	{
-	  xoperands[0] = XEXP (PATTERN (NEXT_INSN (insn)), 1);
-	  output_asm_insn ("b,n %0", xoperands);
+	  if (TARGET_SOM || !TARGET_GAS)
+	    {
+	      /* The HP assembler can generate relocations for the
+		 difference of two symbols.  GAS can do this for a
+		 millicode symbol but not an arbitrary external
+		 symbol when generating SOM output.  */
+	      xoperands[1] = gen_label_rtx ();
+	      output_asm_insn ("{bl|b,l} .+8,%%r1", xoperands);
+	      output_asm_insn ("addi 16,%%r1,%%r31", xoperands);
+	      ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L",
+					 CODE_LABEL_NUMBER (xoperands[1]));
+	      output_asm_insn ("addil L'%0-%l1,%%r1", xoperands);
+	      output_asm_insn ("ldo R'%0-%l1(%%r1),%%r1", xoperands);
+	    }
+	  else
+	    {
+	      output_asm_insn ("{bl|b,l} .+8,%%r1", xoperands);
+	      output_asm_insn ("addi 16,%%r1,%%r31", xoperands);
+	      output_asm_insn ("addil L'%0-$PIC_pcrel$0+8,%%r1", xoperands);
+	      output_asm_insn ("ldo R'%0-$PIC_pcrel$0+12(%%r1),%%r1",
+			       xoperands);
+	    }
 
-	  /* Now delete the delay insn.  */
-	  PUT_CODE (NEXT_INSN (insn), NOTE);
-	  NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
-	  NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+	  /* Jump to our target address in %r1.  */
+	  output_asm_insn ("bv %%r0(%%r1)", xoperands);
 	}
-      return "";
     }
 
-  /* This call has an unconditional jump in its delay slot and the
-     call is known to reach its target or the beginning of the current
-     subspace.  */
-
-  /* Use the containing sequence insn's address.  */
-  seq_insn = NEXT_INSN (PREV_INSN (XVECEXP (final_sequence, 0, 0)));
+  if (seq_length == 0)
+    output_asm_insn ("nop", xoperands);
 
-  distance = INSN_ADDRESSES (INSN_UID (JUMP_LABEL (NEXT_INSN (insn))))
-	       - INSN_ADDRESSES (INSN_UID (seq_insn)) - 8;
+  /* We are done if there isn't a jump in the delay slot.  */
+  if (seq_length == 0 || GET_CODE (NEXT_INSN (insn)) != JUMP_INSN)
+    return "";
 
-  /* If the branch was too far away, emit a normal call followed
-     by a nop, followed by the unconditional branch.
+  /* This call has an unconditional jump in its delay slot.  */
+  xoperands[0] = XEXP (PATTERN (NEXT_INSN (insn)), 1);
 
-     If the branch is close, then adjust %r2 from within the
-     call's delay slot.  */
+  /* See if the return address can be adjusted.  Use the containing
+     sequence insn's address.  */
+  seq_insn = NEXT_INSN (PREV_INSN (XVECEXP (final_sequence, 0, 0)));
+  distance = (INSN_ADDRESSES (INSN_UID (JUMP_LABEL (NEXT_INSN (insn))))
+	      - INSN_ADDRESSES (INSN_UID (seq_insn)) - 8);
 
-  xoperands[0] = call_dest;
-  xoperands[1] = XEXP (PATTERN (NEXT_INSN (insn)), 1);
-  if (! VAL_14_BITS_P (distance))
-    output_asm_insn ("{bl|b,l} %0,%3\n\tnop\n\tb,n %1", xoperands);
-  else
+  if (VAL_14_BITS_P (distance))
     {
-      xoperands[2] = gen_label_rtx ();
-      output_asm_insn ("\n\t{bl|b,l} %0,%3\n\tldo %1-%2(%3),%3",
-		       xoperands);
+      xoperands[1] = gen_label_rtx ();
+      output_asm_insn ("ldo %0-%1(%2),%2", xoperands);
       ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L",
-				 CODE_LABEL_NUMBER (xoperands[2]));
+				 CODE_LABEL_NUMBER (xoperands[3]));
     }
+  else
+    /* ??? This branch may not reach its target.  */
+    output_asm_insn ("nop\n\tb,n %0", xoperands);
 
   /* Delete the jump.  */
   PUT_CODE (NEXT_INSN (insn), NOTE);
   NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
   NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+
   return "";
 }
 
-/* INSN is either a function call.  It may have an unconditional jump
+/* We include the delay slot in the returned length as it is better to
+   over estimate the length than to under estimate it.  */
+
+int
+attr_length_call (insn, sibcall)
+     rtx insn;
+     int sibcall;
+{
+  unsigned long distance = total_code_bytes + INSN_ADDRESSES (INSN_UID (insn));
+
+  if (distance < total_code_bytes)
+    distance = -1;
+
+  if (TARGET_64BIT)
+    {
+      if (!TARGET_LONG_CALLS
+	  && ((!sibcall && distance < 7600000) || distance < 240000))
+	return 8;
+
+      return (sibcall ? 28 : 24);
+    }
+  else
+    {
+      if (!TARGET_LONG_CALLS
+	  && ((TARGET_PA_20 && !sibcall && distance < 7600000)
+	      || distance < 240000))
+	return 8;
+
+      if (TARGET_LONG_ABS_CALL && !flag_pic)
+	return 12;
+
+      if ((TARGET_SOM && TARGET_LONG_PIC_SDIFF_CALL)
+	  || (TARGET_GAS && TARGET_LONG_PIC_PCREL_CALL))
+	{
+	  if (TARGET_PA_20)
+	    return 20;
+
+	  return 28;
+	}
+      else
+	{
+	  int length = 0;
+
+	  if (TARGET_SOM)
+	    length += length_fp_args (insn);
+
+	  if (flag_pic)
+	    length += 4;
+
+	  if (TARGET_PA_20)
+	    return (length + 32);
+
+	  if (!sibcall)
+	    length += 8;
+
+	  return (length + 40);
+	}
+    }
+}
+
+/* INSN is a function call.  It may have an unconditional jump
    in its delay slot.
 
    CALL_DEST is the routine we are calling.  */
 
 const char *
 output_call (insn, call_dest, sibcall)
-  rtx insn;
-  rtx call_dest;
-  int sibcall;
+     rtx insn;
+     rtx call_dest;
+     int sibcall;
 {
+  int delay_insn_deleted = 0;
+  int delay_slot_filled = 0;
   int attr_length = get_attr_length (insn);
   int seq_length = dbr_sequence_length ();
-  int distance;
-  rtx xoperands[4];
-  rtx seq_insn;
+  rtx xoperands[2];
+
+  xoperands[0] = call_dest;
 
-  /* Handle common case -- empty delay slot or no jump in the delay slot,
-     and we're sure that the branch will reach the beginning of the $CODE$
-     subspace.  */
-  if ((seq_length == 0 && attr_length == 12)
-      || (seq_length != 0
-	  && GET_CODE (NEXT_INSN (insn)) != JUMP_INSN
-	  && attr_length == 8))
+  /* Handle the common case where we're sure that the branch will reach
+     the beginning of the $CODE$ subspace.  */
+  if (!TARGET_LONG_CALLS
+      && ((seq_length == 0 && attr_length == 12)
+	  || (seq_length != 0 && attr_length == 8)))
     {
-      xoperands[0] = call_dest;
       xoperands[1] = gen_rtx_REG (word_mode, sibcall ? 0 : 2);
-      output_asm_insn ("{bl|b,l} %0,%1%#", xoperands);
-      return "";
+      output_asm_insn ("{bl|b,l} %0,%1", xoperands);
     }
-
-  /* This call may not reach the beginning of the $CODE$ subspace.  */
-  if (attr_length > 12)
+  else
     {
-      int delay_insn_deleted = 0;
-      rtx xoperands[2];
-      rtx link;
-
-      /* We need to emit an inline long-call branch.  Furthermore,
-	 because we're changing a named function call into an indirect
-	 function call well after the parameters have been set up, we
-	 need to make sure any FP args appear in both the integer
-	 and FP registers.  Also, we need move any delay slot insn
-	 out of the delay slot.  And finally, we can't rely on the linker
-	 being able to fix the call to $$dyncall!  -- Yuk!.  */
-      if (seq_length != 0
-	  && GET_CODE (NEXT_INSN (insn)) != JUMP_INSN)
-	{
-	  /* A non-jump insn in the delay slot.  By definition we can
-	     emit this insn before the call (and in fact before argument
-	     relocating.  */
-	  final_scan_insn (NEXT_INSN (insn), asm_out_file, optimize, 0, 0);
-
-	  /* Now delete the delay insn.  */
-	  PUT_CODE (NEXT_INSN (insn), NOTE);
-	  NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
-	  NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
-	  delay_insn_deleted = 1;
-	}
-
-      /* Now copy any FP arguments into integer registers.  */
-      for (link = CALL_INSN_FUNCTION_USAGE (insn); link; link = XEXP (link, 1))
-	{
-	  int arg_mode, regno;
-	  rtx use = XEXP (link, 0);
-	  if (! (GET_CODE (use) == USE
-		 && GET_CODE (XEXP (use, 0)) == REG
-		 && FUNCTION_ARG_REGNO_P (REGNO (XEXP (use, 0)))))
-	    continue;
-
-	  arg_mode = GET_MODE (XEXP (use, 0));
-	  regno = REGNO (XEXP (use, 0));
-	  /* Is it a floating point register?  */
-	  if (regno >= 32 && regno <= 39)
-	    {
-	      /* Copy from the FP register into an integer register
-		 (via memory).  */
-	      if (arg_mode == SFmode)
-		{
-		  xoperands[0] = XEXP (use, 0);
-		  xoperands[1] = gen_rtx_REG (SImode, 26 - (regno - 32) / 2);
-		  output_asm_insn ("{fstws|fstw} %0,-16(%%sr0,%%r30)",
-				    xoperands);
-		  output_asm_insn ("ldw -16(%%sr0,%%r30),%1", xoperands);
-		}
-	      else
-		{
-		  xoperands[0] = XEXP (use, 0);
-		  xoperands[1] = gen_rtx_REG (DImode, 25 - (regno - 34) / 2);
-		  output_asm_insn ("{fstds|fstd} %0,-16(%%sr0,%%r30)",
-				    xoperands);
-		  output_asm_insn ("ldw -12(%%sr0,%%r30),%R1", xoperands);
-		  output_asm_insn ("ldw -16(%%sr0,%%r30),%1", xoperands);
-		}
+      if (TARGET_64BIT)
+	{
+	  /* ??? As far as I can tell, the HP linker doesn't support the
+	     long pc-relative sequence described in the 64-bit runtime
+	     architecture.  So, we use a slightly longer indirect call.  */
+	  struct deferred_plabel *p = get_plabel (XSTR (call_dest, 0));
+
+	  xoperands[0] = p->internal_label;
+	  xoperands[1] = gen_label_rtx ();
+
+	  /* If this isn't a sibcall, we put the load of %r27 into the
+	     delay slot.  We can't do this in a sibcall as we don't
+	     have a second call-clobbered scratch register available.  */
+	  if (seq_length != 0
+	      && GET_CODE (NEXT_INSN (insn)) != JUMP_INSN
+	      && !sibcall)
+	    {
+	      final_scan_insn (NEXT_INSN (insn), asm_out_file,
+			       optimize, 0, 0);
+
+	      /* Now delete the delay insn.  */
+	      PUT_CODE (NEXT_INSN (insn), NOTE);
+	      NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
+	      NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+	      delay_insn_deleted = 1;
+	    }
+
+	  output_asm_insn ("addil LT'%0,%%r27", xoperands);
+	  output_asm_insn ("ldd RT'%0(%%r1),%%r1", xoperands);
+	  output_asm_insn ("ldd 0(%%r1),%%r1", xoperands);
+
+	  if (sibcall)
+	    {
+	      output_asm_insn ("ldd 24(%%r1),%%r27", xoperands);
+	      output_asm_insn ("ldd 16(%%r1),%%r1", xoperands);
+	      output_asm_insn ("bve (%%r1)", xoperands);
+	    }
+	  else
+	    {
+	      output_asm_insn ("ldd 16(%%r1),%%r2", xoperands);
+	      output_asm_insn ("bve,l (%%r2),%%r2", xoperands);
+	      output_asm_insn ("ldd 24(%%r1),%%r27", xoperands);
+	      delay_slot_filled = 1;
 	    }
 	}
-
-      /* Don't have to worry about TARGET_PORTABLE_RUNTIME here since
-	 we don't have any direct calls in that case.  */
+      else
 	{
-	  size_t i;
-	  const char *name = XSTR (call_dest, 0);
+	  int indirect_call = 0;
 
-	  /* See if we have already put this function on the list
-	     of deferred plabels.  This list is generally small,
-	     so a liner search is not too ugly.  If it proves too
-	     slow replace it with something faster.  */
-	  for (i = 0; i < n_deferred_plabels; i++)
-	    if (strcmp (name, deferred_plabels[i].name) == 0)
-	      break;
-
-	  /* If the deferred plabel list is empty, or this entry was
-	     not found on the list, create a new entry on the list.  */
-	  if (deferred_plabels == NULL || i == n_deferred_plabels)
-	    {
-	      const char *real_name;
-
-	      if (deferred_plabels == 0)
-		deferred_plabels = (struct deferred_plabel *)
-		  ggc_alloc (sizeof (struct deferred_plabel));
+	  /* Emit a long call.  There are several different sequences
+	     of increasing length and complexity.  In most cases,
+             they don't allow an instruction in the delay slot.  */
+	  if (!(TARGET_LONG_ABS_CALL && !flag_pic)
+	      && !(TARGET_SOM && TARGET_LONG_PIC_SDIFF_CALL)
+	      && !(TARGET_GAS && TARGET_LONG_PIC_PCREL_CALL))
+	    indirect_call = 1;
+
+	  if (seq_length != 0
+	      && GET_CODE (NEXT_INSN (insn)) != JUMP_INSN
+	      && !sibcall
+	      && (!TARGET_PA_20 || indirect_call))
+	    {
+	      /* A non-jump insn in the delay slot.  By definition we can
+		 emit this insn before the call (and in fact before argument
+		 relocating.  */
+	      final_scan_insn (NEXT_INSN (insn), asm_out_file, optimize, 0, 0);
+
+	      /* Now delete the delay insn.  */
+	      PUT_CODE (NEXT_INSN (insn), NOTE);
+	      NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
+	      NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+	      delay_insn_deleted = 1;
+	    }
+
+	  if (TARGET_LONG_ABS_CALL && !flag_pic)
+	    {
+	      /* This is the best sequence for making long calls in
+		 non-pic code.  Unfortunately, GNU ld doesn't provide
+		 the stub needed for external calls, and GAS's support
+		 for this with the SOM linker is buggy.  */
+	      output_asm_insn ("ldil L'%0,%%r1", xoperands);
+	      if (sibcall)
+		output_asm_insn ("be R'%0(%%sr4,%%r1)", xoperands);
 	      else
-		deferred_plabels = (struct deferred_plabel *)
-		  ggc_realloc (deferred_plabels,
-			    ((n_deferred_plabels + 1)
-			     * sizeof (struct deferred_plabel)));
-
-	      i = n_deferred_plabels++;
-	      deferred_plabels[i].internal_label = gen_label_rtx ();
-	      deferred_plabels[i].name = ggc_strdup (name);
-
-	      /* Gross.  We have just implicitly taken the address of this
-		 function, mark it as such.  */
-	      real_name = (*targetm.strip_name_encoding) (name);
-	      TREE_SYMBOL_REFERENCED (get_identifier (real_name)) = 1;
-	    }
-
-	  /* We have to load the address of the function using a procedure
-	     label (plabel).  Inline plabels can lose for PIC and other
-	     cases, so avoid them by creating a 32bit plabel in the data
-	     segment.  */
-	  if (flag_pic)
-	    {
-	      xoperands[0] = deferred_plabels[i].internal_label;
-	      if (TARGET_SOM || ! TARGET_GAS)
-		xoperands[1] = gen_label_rtx ();
-
-	      output_asm_insn ("addil LT%%%0,%%r19", xoperands);
-	      output_asm_insn ("ldw RT%%%0(%%r1),%%r22", xoperands);
-	      output_asm_insn ("ldw 0(%%r22),%%r22", xoperands);
-
-	      /* Get our address + 8 into %r1.  */
-	      output_asm_insn ("{bl|b,l} .+8,%%r1", xoperands);
+		{
+		  if (TARGET_PA_20)
+		    output_asm_insn ("be,l R'%0(%%sr4,%%r1),%%sr0,%%r31",
+				     xoperands);
+		  else
+		    output_asm_insn ("ble R'%0(%%sr4,%%r1)", xoperands);
 
-	      if (TARGET_SOM || ! TARGET_GAS)
+		  output_asm_insn ("copy %%r31,%%r2", xoperands);
+		  delay_slot_filled = 1;
+		}
+	    }
+	  else
+	    {
+	      if (TARGET_SOM && TARGET_LONG_PIC_SDIFF_CALL)
 		{
-		  /* Add %r1 to the offset of dyncall from the next insn.  */
-		  output_asm_insn ("addil L%%$$dyncall-%1,%%r1", xoperands);
+		  /* The HP assembler and linker can handle relocations
+		     for the difference of two symbols.  GAS and the HP
+		     linker can't do this when one of the symbols is
+		     external.  */
+		  xoperands[1] = gen_label_rtx ();
+		  output_asm_insn ("{bl|b,l} .+8,%%r1", xoperands);
+		  output_asm_insn ("addil L'%0-%l1,%%r1", xoperands);
 		  ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L",
 					     CODE_LABEL_NUMBER (xoperands[1]));
-		  output_asm_insn ("ldo R%%$$dyncall-%1(%%r1),%%r1", xoperands);
-	        }
-	      else
+		  output_asm_insn ("ldo R'%0-%l1(%%r1),%%r1", xoperands);
+		}
+	      else if (TARGET_GAS && TARGET_LONG_PIC_PCREL_CALL)
 		{
-		  output_asm_insn ("addil L%%$$dyncall-$PIC_pcrel$0+4,%%r1",
+		  /*  GAS currently can't generate the relocations that
+		      are needed for the SOM linker under HP-UX using this
+		      sequence.  The GNU linker doesn't generate the stubs
+		      that are needed for external calls on TARGET_ELF32
+		      with this sequence.  For now, we have to use a
+		      longer plabel sequence when using GAS.  */
+		  output_asm_insn ("{bl|b,l} .+8,%%r1", xoperands);
+		  output_asm_insn ("addil L'%0-$PIC_pcrel$0+4,%%r1",
 				   xoperands);
-		  output_asm_insn ("ldo R%%$$dyncall-$PIC_pcrel$0+8(%%r1),%%r1",
+		  output_asm_insn ("ldo R'%0-$PIC_pcrel$0+8(%%r1),%%r1",
 				   xoperands);
 		}
+	      else
+		{
+		  /* Emit a long plabel-based call sequence.  This is
+		     essentially an inline implementation of $$dyncall.
+		     We don't actually try to call $$dyncall as this is
+		     as difficult as calling the function itself.  */
+		  struct deferred_plabel *p = get_plabel (XSTR (call_dest, 0));
+
+		  xoperands[0] = p->internal_label;
+		  xoperands[1] = gen_label_rtx ();
+
+		  /* Since the call is indirect, FP arguments in registers
+		     need to be copied to the general registers.  Then, the
+		     argument relocation stub will copy them back.  */
+		  if (TARGET_SOM)
+		    copy_fp_args (insn);
 
-	      /* Get the return address into %r31.  */
-	      output_asm_insn ("blr %%r0,%%r31", xoperands);
+		  if (flag_pic)
+		    {
+		      output_asm_insn ("addil LT'%0,%%r19", xoperands);
+		      output_asm_insn ("ldw RT'%0(%%r1),%%r1", xoperands);
+		      output_asm_insn ("ldw 0(%%r1),%%r1", xoperands);
+		    }
+		  else
+		    {
+		      output_asm_insn ("addil LR'%0-$global$,%%r27",
+				       xoperands);
+		      output_asm_insn ("ldw RR'%0-$global$(%%r1),%%r1",
+				       xoperands);
+		    }
 
-	      /* Branch to our target which is in %r1.  */
-	      output_asm_insn ("bv %%r0(%%r1)", xoperands);
+		  output_asm_insn ("bb,>=,n %%r1,30,.+16", xoperands);
+		  output_asm_insn ("depi 0,31,2,%%r1", xoperands);
+		  output_asm_insn ("ldw 4(%%sr0,%%r1),%%r19", xoperands);
+		  output_asm_insn ("ldw 0(%%sr0,%%r1),%%r1", xoperands);
 
-	      if (sibcall)
-		{
-		  /* This call never returns, so we do not need to fix the
-		     return pointer.  */
-		  output_asm_insn ("nop", xoperands);
-		}
-	      else
-		{
-		  /* Copy the return address into %r2 also.  */
-		  output_asm_insn ("copy %%r31,%%r2", xoperands);
+		  if (!sibcall && !TARGET_PA_20)
+		    {
+		      output_asm_insn ("{bl|b,l} .+8,%%r2", xoperands);
+		      output_asm_insn ("addi 16,%%r2,%%r2", xoperands);
+		    }
 		}
-	    }
-	  else
-	    {
-	      xoperands[0] = deferred_plabels[i].internal_label;
 
-	      /* Get the address of our target into %r22.  */
-	      output_asm_insn ("addil LR%%%0-$global$,%%r27", xoperands);
-	      output_asm_insn ("ldw RR%%%0-$global$(%%r1),%%r22", xoperands);
-
-	      /* Get the high part of the  address of $dyncall into %r2, then
-		 add in the low part in the branch instruction.  */
-	      output_asm_insn ("ldil L%%$$dyncall,%%r2", xoperands);
 	      if (TARGET_PA_20)
-		output_asm_insn ("be,l R%%$$dyncall(%%sr4,%%r2),%%sr0,%%r31",
-				 xoperands);
-	      else
-		output_asm_insn ("ble R%%$$dyncall(%%sr4,%%r2)", xoperands);
-
-	      if (sibcall)
 		{
-		  /* This call never returns, so we do not need to fix the
-		     return pointer.  */
-		  output_asm_insn ("nop", xoperands);
+		  if (sibcall)
+		    output_asm_insn ("bve (%%r1)", xoperands);
+		  else
+		    {
+		      if (indirect_call)
+			{
+			  output_asm_insn ("bve,l (%%r1),%%r2", xoperands);
+			  output_asm_insn ("stw %%r2,-24(%%sp)", xoperands);
+			  delay_slot_filled = 1;
+			}
+		      else
+			output_asm_insn ("bve,l (%%r1),%%r2", xoperands);
+		    }
 		}
 	      else
 		{
-		  /* Copy the return address into %r2 also.  */
-		  output_asm_insn ("copy %%r31,%%r2", xoperands);
-		}
-	    }
-	}
+	          output_asm_insn ("ldsid (%%r1),%%r31\n\tmtsp %%r31,%%sr0",
+				   xoperands);
 
-      /* If we had a jump in the call's delay slot, output it now.  */
-      if (seq_length != 0 && !delay_insn_deleted)
-	{
-	  xoperands[0] = XEXP (PATTERN (NEXT_INSN (insn)), 1);
-	  output_asm_insn ("b,n %0", xoperands);
+		  if (sibcall)
+		    output_asm_insn ("be 0(%%sr0,%%r1)", xoperands);
+		  else
+		    {
+		      output_asm_insn ("ble 0(%%sr0,%%r1)", xoperands);
 
-	  /* Now delete the delay insn.  */
-	  PUT_CODE (NEXT_INSN (insn), NOTE);
-	  NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
-	  NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+		      if (indirect_call)
+			output_asm_insn ("stw %%r31,-24(%%sp)", xoperands);
+		      else
+			output_asm_insn ("copy %%r31,%%r2", xoperands);
+		      delay_slot_filled = 1;
+		    }
+		}
+	    }
 	}
-      return "";
     }
 
-  /* This call has an unconditional jump in its delay slot and the
-     call is known to reach its target or the beginning of the current
-     subspace.  */
+  if (seq_length == 0 || (delay_insn_deleted && !delay_slot_filled))
+    output_asm_insn ("nop", xoperands);
 
-  /* Use the containing sequence insn's address.  */
-  seq_insn = NEXT_INSN (PREV_INSN (XVECEXP (final_sequence, 0, 0)));
+  /* We are done if there isn't a jump in the delay slot.  */
+  if (seq_length == 0
+      || delay_insn_deleted
+      || GET_CODE (NEXT_INSN (insn)) != JUMP_INSN)
+    return "";
 
-  distance = INSN_ADDRESSES (INSN_UID (JUMP_LABEL (NEXT_INSN (insn))))
-	       - INSN_ADDRESSES (INSN_UID (seq_insn)) - 8;
+  /* A sibcall should never have a branch in the delay slot.  */
+  if (sibcall)
+    abort ();
 
-  /* If the branch is too far away, emit a normal call followed
-     by a nop, followed by the unconditional branch.  If the branch
-     is close, then adjust %r2 in the call's delay slot.  */
+  /* This call has an unconditional jump in its delay slot.  */
+  xoperands[0] = XEXP (PATTERN (NEXT_INSN (insn)), 1);
 
-  xoperands[0] = call_dest;
-  xoperands[1] = XEXP (PATTERN (NEXT_INSN (insn)), 1);
-  if (! VAL_14_BITS_P (distance))
-    output_asm_insn ("{bl|b,l} %0,%%r2\n\tnop\n\tb,n %1", xoperands);
-  else
+  if (!delay_slot_filled)
     {
-      xoperands[3] = gen_label_rtx ();
-      output_asm_insn ("\n\t{bl|b,l} %0,%%r2\n\tldo %1-%3(%%r2),%%r2",
-		       xoperands);
-      ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L",
-				 CODE_LABEL_NUMBER (xoperands[3]));
+      /* See if the return address can be adjusted.  Use the containing
+         sequence insn's address.  */
+      rtx seq_insn = NEXT_INSN (PREV_INSN (XVECEXP (final_sequence, 0, 0)));
+      int distance = (INSN_ADDRESSES (INSN_UID (JUMP_LABEL (NEXT_INSN (insn))))
+		      - INSN_ADDRESSES (INSN_UID (seq_insn)) - 8);
+
+      if (VAL_14_BITS_P (distance))
+	{
+	  xoperands[1] = gen_label_rtx ();
+	  output_asm_insn ("ldo %0-%1(%%r2),%%r2", xoperands);
+	  ASM_OUTPUT_INTERNAL_LABEL (asm_out_file, "L",
+				     CODE_LABEL_NUMBER (xoperands[3]));
+	}
+      else
+	/* ??? This branch may not reach its target.  */
+	output_asm_insn ("nop\n\tb,n %0", xoperands);
     }
+  else
+    /* ??? This branch may not reach its target.  */
+    output_asm_insn ("b,n %0", xoperands);
 
   /* Delete the jump.  */
   PUT_CODE (NEXT_INSN (insn), NOTE);
   NOTE_LINE_NUMBER (NEXT_INSN (insn)) = NOTE_INSN_DELETED;
   NOTE_SOURCE_FILE (NEXT_INSN (insn)) = 0;
+
   return "";
 }
 
@@ -6580,8 +6772,8 @@ pa_asm_output_mi_thunk (file, thunk_fnde
     {
       if (! TARGET_64BIT && ! TARGET_PORTABLE_RUNTIME && flag_pic)
 	{
-	  fprintf (file, "\taddil LT%%%s,%%r19\n", lab);
-	  fprintf (file, "\tldw RT%%%s(%%r1),%%r22\n", lab);
+	  fprintf (file, "\taddil LT'%s,%%r19\n", lab);
+	  fprintf (file, "\tldw RT'%s(%%r1),%%r22\n", lab);
 	  fprintf (file, "\tldw 0(%%sr0,%%r22),%%r22\n");
 	  fprintf (file, "\tbb,>=,n %%r22,30,.+16\n");
 	  fprintf (file, "\tdepi 0,31,2,%%r22\n");
@@ -6603,13 +6795,13 @@ pa_asm_output_mi_thunk (file, thunk_fnde
     {
       if (! TARGET_64BIT && ! TARGET_PORTABLE_RUNTIME && flag_pic)
 	{
-	  fprintf (file, "\taddil L%%");
+	  fprintf (file, "\taddil L'");
 	  fprintf (file, HOST_WIDE_INT_PRINT_DEC, delta);
-	  fprintf (file, ",%%r26\n\tldo R%%");
+	  fprintf (file, ",%%r26\n\tldo R'");
 	  fprintf (file, HOST_WIDE_INT_PRINT_DEC, delta);
 	  fprintf (file, "(%%r1),%%r26\n");
-	  fprintf (file, "\taddil LT%%%s,%%r19\n", lab);
-	  fprintf (file, "\tldw RT%%%s(%%r1),%%r22\n", lab);
+	  fprintf (file, "\taddil LT'%s,%%r19\n", lab);
+	  fprintf (file, "\tldw RT'%s(%%r1),%%r22\n", lab);
 	  fprintf (file, "\tldw 0(%%sr0,%%r22),%%r22\n");
 	  fprintf (file, "\tbb,>=,n %%r22,30,.+16\n");
 	  fprintf (file, "\tdepi 0,31,2,%%r22\n");
@@ -6620,9 +6812,9 @@ pa_asm_output_mi_thunk (file, thunk_fnde
 	}
       else
 	{
-	  fprintf (file, "\taddil L%%");
+	  fprintf (file, "\taddil L'");
 	  fprintf (file, HOST_WIDE_INT_PRINT_DEC, delta);
-	  fprintf (file, ",%%r26\n\tb %s\n\tldo R%%", target_name);
+	  fprintf (file, ",%%r26\n\tb %s\n\tldo R'", target_name);
 	  fprintf (file, HOST_WIDE_INT_PRINT_DEC, delta);
 	  fprintf (file, "(%%r1),%%r26\n");
 	}
@@ -6634,7 +6826,7 @@ pa_asm_output_mi_thunk (file, thunk_fnde
       data_section ();
       fprintf (file, "\t.align 4\n");
       ASM_OUTPUT_INTERNAL_LABEL (file, "LTHN", current_thunk_number);
-      fprintf (file, "\t.word P%%%s\n", target_name);
+      fprintf (file, "\t.word P'%s\n", target_name);
       function_section (thunk_fndecl);
     }
   current_thunk_number++;
Index: config/pa/pa.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.h,v
retrieving revision 1.173
diff -u -3 -p -r1.173 pa.h
--- config/pa/pa.h	20 Oct 2002 22:37:12 -0000	1.173
+++ config/pa/pa.h	30 Oct 2002 17:06:44 -0000
@@ -31,7 +31,7 @@ enum cmp_type				/* comparison type */
 };
 
 /* For long call handling.  */
-extern unsigned int total_code_bytes;
+extern unsigned long total_code_bytes;
 
 /* Which processor to schedule for.  */
 
@@ -152,6 +152,12 @@ extern int target_flags;
 #define TARGET_GNU_LD (target_flags & MASK_GNU_LD)
 #endif
 
+/* Force generation of long calls.  */
+#define MASK_LONG_CALLS 32768
+#ifndef TARGET_LONG_CALLS
+#define TARGET_LONG_CALLS (target_flags & MASK_LONG_CALLS)
+#endif
+
 #ifndef TARGET_PA_10
 #define TARGET_PA_10 (target_flags & (MASK_PA_11 | MASK_PA_20) == 0)
 #endif
@@ -179,6 +185,27 @@ extern int target_flags;
 #define TARGET_SOM 0
 #endif
 
+/* The following three defines are potential target switches.  The current
+   defines are optimal given the current capabilities of GAS and GNU ld.  */
+
+/* Define to a C expression evaluating to true to use long absolute calls.
+   Currently, only the HP assembler and SOM linker support long absolute
+   calls.  They are used only in non-pic code.  */
+#define TARGET_LONG_ABS_CALL (TARGET_SOM && !TARGET_GAS)
+
+/* Define to a C expression evaluating to true to use long pic symbol
+   difference calls.  This is a call variant similar to the long pic
+   pc-relative call.  Long pic symbol difference calls are only used with
+   the HP SOM linker.  Currently, only the HP assembler supports these
+   calls.  GAS doesn't allow an arbritrary difference of two symbols.  */
+#define TARGET_LONG_PIC_SDIFF_CALL (!TARGET_GAS)
+
+/* Define to a C expression evaluating to true to use long pic
+   pc-relative calls.  Long pic pc-relative calls are only used with
+   GAS.  Currently, they are usable for calls within a module but
+   not for external calls.  */
+#define TARGET_LONG_PIC_PCREL_CALL 0
+
 /* Macro to define tables used to set the flags.  This is a
    list in braces of target switches with each switch being
    { "NAME", VALUE, "HELP_STRING" }.  VALUE is the bits to set,
@@ -237,6 +264,10 @@ extern int target_flags;
      N_("Generate code for huge switch statements") },			\
    { "no-big-switch",		-MASK_BIG_SWITCH,			\
      N_("Do not generate code for huge switch statements") },		\
+   { "long-calls",		 MASK_LONG_CALLS,			\
+     N_("Always generate long calls") },				\
+   { "no-long-calls",		-MASK_LONG_CALLS,			\
+     N_("Generate long calls only when needed") },			\
    { "linker-opt",		 0,					\
      N_("Enable linker optimizations") },				\
    SUBTARGET_SWITCHES							\
@@ -1193,8 +1224,14 @@ extern int may_call_alloca;
        /* Using DFmode forces only short displacements	\
 	  to be recognized as valid in reg+d addresses. \
 	  However, this is not necessary for PA2.0 since\
-	  it has long FP loads/stores.  */		\
+	  it has long FP loads/stores.			\
+							\
+	  FIXME: the ELF32 linker clobbers the LSB of	\
+	  the FP register number in {fldw,fstw} insns.	\
+	  Thus, we only allow long FP loads/stores on	\
+	  TARGET_64BIT.  */				\
        && memory_address_p ((TARGET_PA_20		\
+			     && !TARGET_ELF32		\
 			     ? GET_MODE (OP)		\
 			     : DFmode),			\
 			    XEXP (OP, 0))		\
@@ -1300,7 +1337,7 @@ extern int may_call_alloca;
 	if (GET_CODE (index) == CONST_INT		\
 	    && ((INT_14_BITS (index)			\
 		 && (TARGET_SOFT_FLOAT			\
-		     || (TARGET_PA_20		\
+		     || (TARGET_PA_20			\
 			 && ((MODE == SFmode		\
 			      && (INTVAL (index) % 4) == 0)\
 			     || (MODE == DFmode		\
@@ -1327,6 +1364,7 @@ extern int may_call_alloca;
 	       /* We can allow symbolic LO_SUM addresses\
 		  for PA2.0.  */			\
 	       || (TARGET_PA_20				\
+		   && !TARGET_ELF32			\
 	           && GET_CODE (XEXP (X, 1)) != CONST_INT)\
 	       || ((MODE) != SFmode			\
 		   && (MODE) != DFmode)))		\
@@ -1340,6 +1378,7 @@ extern int may_call_alloca;
 	       /* We can allow symbolic LO_SUM addresses\
 		  for PA2.0.  */			\
 	       || (TARGET_PA_20				\
+		   && !TARGET_ELF32			\
 	           && GET_CODE (XEXP (X, 1)) != CONST_INT)\
 	       || ((MODE) != SFmode			\
 		   && (MODE) != DFmode)))		\
@@ -1354,7 +1393,7 @@ extern int may_call_alloca;
 	   && REG_OK_FOR_BASE_P (XEXP (X, 0))		\
 	   && GET_CODE (XEXP (X, 1)) == UNSPEC		\
 	   && (TARGET_SOFT_FLOAT			\
-	       || TARGET_PA_20				\
+	       || (TARGET_PA_20	&& !TARGET_ELF32)	\
 	       || ((MODE) != SFmode			\
 		   && (MODE) != DFmode)))		\
     goto ADDR;						\
@@ -1386,7 +1425,7 @@ do { 									\
   rtx new, temp = NULL_RTX;						\
 									\
   mask = (GET_MODE_CLASS (MODE) == MODE_FLOAT				\
-	  ? (TARGET_PA_20 ? 0x3fff : 0x1f) : 0x3fff);			\
+	  ? (TARGET_PA_20 && !TARGET_ELF32 ? 0x3fff : 0x1f) : 0x3fff);	\
 									\
   if (optimize								\
       && GET_CODE (AD) == PLUS)						\
Index: config/pa/pa.md
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.md,v
retrieving revision 1.113
diff -u -3 -p -r1.113 pa.md
--- config/pa/pa.md	11 Sep 2002 02:45:09 -0000	1.113
+++ config/pa/pa.md	30 Oct 2002 17:06:46 -0000
@@ -105,12 +105,9 @@
 (define_delay (eq_attr "type" "call")
   [(eq_attr "in_call_delay" "true") (nil) (nil)])
 
-;; millicode call delay slot description.  Note it disallows delay slot
-;; when TARGET_PORTABLE_RUNTIME is true.
+;; Millicode call delay slot description.
 (define_delay (eq_attr "type" "milli")
-  [(and (eq_attr "in_call_delay" "true")
-	(eq (symbol_ref "TARGET_PORTABLE_RUNTIME") (const_int 0)))
-   (nil) (nil)])
+  [(eq_attr "in_call_delay" "true") (nil) (nil)])
 
 ;; Return and other similar instructions.
 (define_delay (eq_attr "type" "branch,parallel_branch")
@@ -4089,27 +4086,7 @@
   "!TARGET_64BIT"
   "* return output_mul_insn (0, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length")
-     (cond [
-;; Target (or stub) within reach
-            (and (lt (plus (symbol_ref "total_code_bytes") (pc))
-                     (const_int 240000))
-                 (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                     (const_int 0)))
-            (const_int 4)
-
-;; Out of reach PIC
-            (ne (symbol_ref "flag_pic")
-                (const_int 0))
-            (const_int 24)
-
-;; Out of reach PORTABLE_RUNTIME
-            (ne (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                (const_int 0))
-            (const_int 20)]
-
-;; Out of reach, can use ble
-          (const_int 12)))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 (define_insn ""
   [(set (reg:SI 29) (mult:SI (reg:SI 26) (reg:SI 25)))
@@ -4120,7 +4097,7 @@
   "TARGET_64BIT"
   "* return output_mul_insn (0, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (const_int 4))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 (define_expand "muldi3"
   [(set (match_operand:DI 0 "register_operand" "")
@@ -4211,27 +4188,7 @@
   "*
    return output_div_insn (operands, 0, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length")
-     (cond [
-;; Target (or stub) within reach
-            (and (lt (plus (symbol_ref "total_code_bytes") (pc))
-                     (const_int 240000))
-                 (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                     (const_int 0)))
-            (const_int 4)
-
-;; Out of reach PIC
-            (ne (symbol_ref "flag_pic")
-                (const_int 0))
-            (const_int 24)
-
-;; Out of reach PORTABLE_RUNTIME
-            (ne (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                (const_int 0))
-            (const_int 20)]
-
-;; Out of reach, can use ble
-          (const_int 12)))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 (define_insn ""
   [(set (reg:SI 29)
@@ -4245,7 +4202,7 @@
   "*
    return output_div_insn (operands, 0, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (const_int 4))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 (define_expand "udivsi3"
   [(set (reg:SI 26) (match_operand:SI 1 "move_operand" ""))
@@ -4261,6 +4218,7 @@
   "
 {
   operands[3] = gen_reg_rtx (SImode);
+
   if (TARGET_64BIT)
     {
       operands[5] = gen_rtx_REG (SImode, 2);
@@ -4287,27 +4245,7 @@
   "*
    return output_div_insn (operands, 1, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length")
-     (cond [
-;; Target (or stub) within reach
-            (and (lt (plus (symbol_ref "total_code_bytes") (pc))
-                     (const_int 240000))
-                 (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                     (const_int 0)))
-            (const_int 4)
-
-;; Out of reach PIC
-            (ne (symbol_ref "flag_pic")
-                (const_int 0))
-            (const_int 24)
-
-;; Out of reach PORTABLE_RUNTIME
-            (ne (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                (const_int 0))
-            (const_int 20)]
-
-;; Out of reach, can use ble
-          (const_int 12)))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 (define_insn ""
   [(set (reg:SI 29)
@@ -4321,7 +4259,7 @@
   "*
    return output_div_insn (operands, 1, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (const_int 4))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 (define_expand "modsi3"
   [(set (reg:SI 26) (match_operand:SI 1 "move_operand" ""))
@@ -4360,27 +4298,7 @@
   "*
   return output_mod_insn (0, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length")
-     (cond [
-;; Target (or stub) within reach
-            (and (lt (plus (symbol_ref "total_code_bytes") (pc))
-                     (const_int 240000))
-                 (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                     (const_int 0)))
-            (const_int 4)
-
-;; Out of reach PIC
-            (ne (symbol_ref "flag_pic")
-                (const_int 0))
-            (const_int 24)
-
-;; Out of reach PORTABLE_RUNTIME
-            (ne (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                (const_int 0))
-            (const_int 20)]
-
-;; Out of reach, can use ble
-          (const_int 12)))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 (define_insn ""
   [(set (reg:SI 29) (mod:SI (reg:SI 26) (reg:SI 25)))
@@ -4393,7 +4311,7 @@
   "*
   return output_mod_insn (0, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (const_int 4))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 (define_expand "umodsi3"
   [(set (reg:SI 26) (match_operand:SI 1 "move_operand" ""))
@@ -4432,27 +4350,7 @@
   "*
   return output_mod_insn (1, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length")
-     (cond [
-;; Target (or stub) within reach
-            (and (lt (plus (symbol_ref "total_code_bytes") (pc))
-                     (const_int 240000))
-                 (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                     (const_int 0)))
-            (const_int 4)
-
-;; Out of reach PIC
-            (ne (symbol_ref "flag_pic")
-                (const_int 0))
-            (const_int 24)
-
-;; Out of reach PORTABLE_RUNTIME
-            (ne (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                (const_int 0))
-            (const_int 20)]
-
-;; Out of reach, can use ble
-          (const_int 12)))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 (define_insn ""
   [(set (reg:SI 29) (umod:SI (reg:SI 26) (reg:SI 25)))
@@ -4465,7 +4363,7 @@
   "*
   return output_mod_insn (1, insn);"
   [(set_attr "type" "milli")
-   (set (attr "length") (const_int 4))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 0)"))])
 
 ;;- and instructions
 ;; We define DImode `and` so with DImode `not` we can get
@@ -6036,11 +5934,12 @@
       call_insn = emit_call_insn (gen_call_internal_reg (operands[1]));
     }
 
+  if (TARGET_64BIT)
+    use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), arg_pointer_rtx);
+
   if (flag_pic)
     {
       use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), pic_offset_table_rtx);
-      if (TARGET_64BIT)
-	use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), arg_pointer_rtx);
 
       /* After each call we must restore the PIC register, even if it
 	 doesn't appear to be used.  */
@@ -6052,6 +5951,7 @@
 (define_insn "call_internal_symref"
   [(call (mem:SI (match_operand 0 "call_operand_address" ""))
 	 (match_operand 1 "" "i"))
+   (clobber (reg:SI 1))
    (clobber (reg:SI 2))
    (use (const_int 0))]
   "! TARGET_PORTABLE_RUNTIME"
@@ -6061,21 +5961,7 @@
   return output_call (insn, operands[0], 0);
 }"
   [(set_attr "type" "call")
-   (set (attr "length")
-;;       If we're sure that we can either reach the target or that the
-;;	 linker can use a long-branch stub, then the length is at most
-;;	 8 bytes.
-;;
-;;	 For long-calls the length will be at most 68 bytes (non-pic)
-;;	 or 84 bytes (pic).  */
-;;	 Else we have to use a long-call;
-      (if_then_else (lt (plus (symbol_ref "total_code_bytes") (pc))
-			(const_int 240000))
-		    (const_int 8)
-		    (if_then_else (eq (symbol_ref "flag_pic")
-				      (const_int 0))
-				  (const_int 68)
-				  (const_int 84))))])
+   (set (attr "length") (symbol_ref "attr_length_call (insn, 0)"))])
 
 (define_insn "call_internal_reg_64bit"
   [(call (mem:SI (match_operand:DI 0 "register_operand" "r"))
@@ -6086,15 +5972,16 @@
   "*
 {
   /* ??? Needs more work.  Length computation, split into multiple insns,
-     do not use %r22 directly, expose delay slot.  */
-  return \"ldd 16(%0),%%r2\;ldd 24(%0),%%r27\;bve,l (%%r2),%%r2\;nop\";
+     expose delay slot.  */
+  return \"ldd 16(%0),%%r2\;bve,l (%%r2),%%r2\;ldd 24(%0),%%r27\";
 }"
   [(set_attr "type" "dyncall")
-   (set (attr "length") (const_int 16))])
+   (set (attr "length") (const_int 12))])
 
 (define_insn "call_internal_reg"
   [(call (mem:SI (reg:SI 22))
 	 (match_operand 0 "" "i"))
+   (clobber (reg:SI 1))
    (clobber (reg:SI 2))
    (use (const_int 1))]
   ""
@@ -6218,11 +6105,13 @@
       call_insn = emit_call_insn (gen_call_value_internal_reg (operands[0],
 							       operands[2]));
     }
+
+  if (TARGET_64BIT)
+    use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), arg_pointer_rtx);
+
   if (flag_pic)
     {
       use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), pic_offset_table_rtx);
-      if (TARGET_64BIT)
-	use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), arg_pointer_rtx);
 
       /* After each call we must restore the PIC register, even if it
 	 doesn't appear to be used.  */
@@ -6235,6 +6124,7 @@
   [(set (match_operand 0 "" "=rf")
 	(call (mem:SI (match_operand 1 "call_operand_address" ""))
 	      (match_operand 2 "" "i")))
+   (clobber (reg:SI 1))
    (clobber (reg:SI 2))
    (use (const_int 0))]
   ;;- Don't use operand 1 for most machines.
@@ -6245,21 +6135,7 @@
   return output_call (insn, operands[1], 0);
 }"
   [(set_attr "type" "call")
-   (set (attr "length")
-;;       If we're sure that we can either reach the target or that the
-;;	 linker can use a long-branch stub, then the length is at most
-;;	 8 bytes.
-;;
-;;	 For long-calls the length will be at most 68 bytes (non-pic)
-;;	 or 84 bytes (pic).  */
-;;	 Else we have to use a long-call;
-      (if_then_else (lt (plus (symbol_ref "total_code_bytes") (pc))
-			(const_int 240000))
-		    (const_int 8)
-		    (if_then_else (eq (symbol_ref "flag_pic")
-				      (const_int 0))
-				  (const_int 68)
-				  (const_int 84))))])
+   (set (attr "length") (symbol_ref "attr_length_call (insn, 0)"))])
 
 (define_insn "call_value_internal_reg_64bit"
   [(set (match_operand 0 "" "=rf")
@@ -6271,16 +6147,17 @@
   "*
 {
   /* ??? Needs more work.  Length computation, split into multiple insns,
-     do not use %r22 directly, expose delay slot.  */
-  return \"ldd 16(%1),%%r2\;ldd 24(%1),%%r27\;bve,l (%%r2),%%r2\;nop\";
+     expose delay slot.  */
+  return \"ldd 16(%1),%%r2\;bve,l (%%r2),%%r2\;ldd 24(%1),%%r27\";
 }"
   [(set_attr "type" "dyncall")
-   (set (attr "length") (const_int 16))])
+   (set (attr "length") (const_int 12))])
 
 (define_insn "call_value_internal_reg"
   [(set (match_operand 0 "" "=rf")
 	(call (mem:SI (reg:SI 22))
 	      (match_operand 1 "" "i")))
+   (clobber (reg:SI 1))
    (clobber (reg:SI 2))
    (use (const_int 1))]
   ""
@@ -6389,10 +6266,9 @@
 }")
 
 (define_expand "sibcall"
-  [(parallel [(call (match_operand:SI 0 "" "")
-		    (match_operand 1 "" ""))
-	      (clobber (reg:SI 0))])]
-  "! TARGET_PORTABLE_RUNTIME"
+  [(call (match_operand:SI 0 "" "")
+	 (match_operand 1 "" ""))]
+  "!TARGET_PORTABLE_RUNTIME"
   "
 {
   rtx op;
@@ -6400,8 +6276,21 @@
 
   op = XEXP (operands[0], 0);
 
-  /* We do not allow indirect sibling calls.  */
-  call_insn = emit_call_insn (gen_sibcall_internal_symref (op, operands[1]));
+  if (TARGET_64BIT)
+    emit_move_insn (arg_pointer_rtx,
+		    gen_rtx_PLUS (word_mode, virtual_outgoing_args_rtx,
+				  GEN_INT (64)));
+
+  /* Indirect sibling calls are not allowed.  */
+  if (TARGET_64BIT)
+    call_insn = gen_sibcall_internal_symref_64bit (op, operands[1]);
+  else
+    call_insn = gen_sibcall_internal_symref (op, operands[1]);
+
+  call_insn = emit_call_insn (call_insn);
+
+  if (TARGET_64BIT)
+    use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), arg_pointer_rtx);
 
   if (flag_pic)
     {
@@ -6417,38 +6306,39 @@
 (define_insn "sibcall_internal_symref"
   [(call (mem:SI (match_operand 0 "call_operand_address" ""))
 	 (match_operand 1 "" "i"))
-   (clobber (reg:SI 0))
+   (clobber (reg:SI 1))
    (use (reg:SI 2))
    (use (const_int 0))]
-  "! TARGET_PORTABLE_RUNTIME"
+  "!TARGET_PORTABLE_RUNTIME && !TARGET_64BIT"
   "*
 {
   output_arg_descriptor (insn);
   return output_call (insn, operands[0], 1);
 }"
   [(set_attr "type" "call")
-   (set (attr "length")
-;;       If we're sure that we can either reach the target or that the
-;;	 linker can use a long-branch stub, then the length is at most
-;;	 8 bytes.
-;;
-;;	 For long-calls the length will be at most 68 bytes (non-pic)
-;;	 or 84 bytes (pic).  */
-;;	 Else we have to use a long-call;
-      (if_then_else (lt (plus (symbol_ref "total_code_bytes") (pc))
-			(const_int 240000))
-		    (const_int 8)
-		    (if_then_else (eq (symbol_ref "flag_pic")
-				      (const_int 0))
-				  (const_int 68)
-				  (const_int 84))))])
+   (set (attr "length") (symbol_ref "attr_length_call (insn, 1)"))])
+
+(define_insn "sibcall_internal_symref_64bit"
+  [(call (mem:SI (match_operand 0 "call_operand_address" ""))
+	 (match_operand 1 "" "i"))
+   (clobber (reg:SI 1))
+   (clobber (reg:SI 27))
+   (use (reg:SI 2))
+   (use (const_int 0))]
+  "TARGET_64BIT"
+  "*
+{
+  output_arg_descriptor (insn);
+  return output_call (insn, operands[0], 1);
+}"
+  [(set_attr "type" "call")
+   (set (attr "length") (symbol_ref "attr_length_call (insn, 1)"))])
 
 (define_expand "sibcall_value"
-  [(parallel [(set (match_operand 0 "" "")
+  [(set (match_operand 0 "" "")
 		   (call (match_operand:SI 1 "" "")
-			 (match_operand 2 "" "")))
-	      (clobber (reg:SI 0))])]
-  "! TARGET_PORTABLE_RUNTIME"
+			 (match_operand 2 "" "")))]
+  "!TARGET_PORTABLE_RUNTIME"
   "
 {
   rtx op;
@@ -6456,10 +6346,24 @@
 
   op = XEXP (operands[1], 0);
 
-  /* We do not allow indirect sibling calls.  */
-  call_insn = emit_call_insn (gen_sibcall_value_internal_symref (operands[0],
-								 op,
-								 operands[2]));
+  if (TARGET_64BIT)
+    emit_move_insn (arg_pointer_rtx,
+		    gen_rtx_PLUS (word_mode, virtual_outgoing_args_rtx,
+				  GEN_INT (64)));
+
+  /* Indirect sibling calls are not allowed.  */
+  if (TARGET_64BIT)
+    call_insn
+      = gen_sibcall_value_internal_symref_64bit (operands[0], op, operands[2]);
+  else
+    call_insn
+      = gen_sibcall_value_internal_symref (operands[0], op, operands[2]);
+
+  call_insn = emit_call_insn (call_insn);
+
+  if (TARGET_64BIT)
+    use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), arg_pointer_rtx);
+
   if (flag_pic)
     {
       use_reg (&CALL_INSN_FUNCTION_USAGE (call_insn), pic_offset_table_rtx);
@@ -6475,32 +6379,34 @@
   [(set (match_operand 0 "" "=rf")
 	(call (mem:SI (match_operand 1 "call_operand_address" ""))
 	      (match_operand 2 "" "i")))
-   (clobber (reg:SI 0))
+   (clobber (reg:SI 1))
    (use (reg:SI 2))
    (use (const_int 0))]
-  ;;- Don't use operand 1 for most machines.
-  "! TARGET_PORTABLE_RUNTIME"
+  "!TARGET_PORTABLE_RUNTIME && !TARGET_64BIT"
   "*
 {
   output_arg_descriptor (insn);
   return output_call (insn, operands[1], 1);
 }"
   [(set_attr "type" "call")
-   (set (attr "length")
-;;       If we're sure that we can either reach the target or that the
-;;	 linker can use a long-branch stub, then the length is at most
-;;	 8 bytes.
-;;
-;;	 For long-calls the length will be at most 68 bytes (non-pic)
-;;	 or 84 bytes (pic).  */
-;;	 Else we have to use a long-call;
-      (if_then_else (lt (plus (symbol_ref "total_code_bytes") (pc))
-			(const_int 240000))
-		    (const_int 8)
-		    (if_then_else (eq (symbol_ref "flag_pic")
-				      (const_int 0))
-				  (const_int 68)
-				  (const_int 84))))])
+   (set (attr "length") (symbol_ref "attr_length_call (insn, 1)"))])
+
+(define_insn "sibcall_value_internal_symref_64bit"
+  [(set (match_operand 0 "" "=rf")
+	(call (mem:SI (match_operand 1 "call_operand_address" ""))
+	      (match_operand 2 "" "i")))
+   (clobber (reg:SI 1))
+   (clobber (reg:SI 27))
+   (use (reg:SI 2))
+   (use (const_int 0))]
+  "TARGET_64BIT"
+  "*
+{
+  output_arg_descriptor (insn);
+  return output_call (insn, operands[1], 1);
+}"
+  [(set_attr "type" "call")
+   (set (attr "length") (symbol_ref "attr_length_call (insn, 1)"))])
 
 (define_insn "nop"
   [(const_int 0)]
@@ -7392,6 +7298,12 @@
   "!TARGET_64BIT"
   "*
 {
+  int length = get_attr_length (insn);
+  rtx xoperands[2];
+
+  xoperands[0] = GEN_INT (length - 8);
+  xoperands[1] = GEN_INT (length - 16);
+
   /* Must import the magic millicode routine.  */
   output_asm_insn (\".IMPORT $$sh_func_adrs,MILLICODE\", NULL);
 
@@ -7400,60 +7312,24 @@
      First, copy our input parameter into %r29 just in case we don't
      need to call $$sh_func_adrs.  */
   output_asm_insn (\"copy %%r26,%%r29\", NULL);
+  output_asm_insn (\"{extru|extrw,u} %%r26,31,2,%%r31\", NULL);
 
   /* Next, examine the low two bits in %r26, if they aren't 0x2, then
      we use %r26 unchanged.  */
-  if (get_attr_length (insn) == 32)
-    output_asm_insn (\"{extru|extrw,u} %%r26,31,2,%%r31\;{comib|cmpib},<>,n 2,%%r31,.+24\", NULL);
-  else if (get_attr_length (insn) == 40)
-    output_asm_insn (\"{extru|extrw,u} %%r26,31,2,%%r31\;{comib|cmpib},<>,n 2,%%r31,.+32\", NULL);
-  else if (get_attr_length (insn) == 44)
-    output_asm_insn (\"{extru|extrw,u} %%r26,31,2,%%r31\;{comib|cmpib},<>,n 2,%%r31,.+36\", NULL);
-  else
-    output_asm_insn (\"{extru|extrw,u} %%r26,31,2,%%r31\;{comib|cmpib},<>,n 2,%%r31,.+20\", NULL);
+  output_asm_insn (\"{comib|cmpib},<>,n 2,%%r31,.+%0\", xoperands);
+  output_asm_insn (\"ldi 4096,%%r31\", NULL);
 
   /* Next, compare %r26 with 4096, if %r26 is less than or equal to
-     4096, then we use %r26 unchanged.  */
-  if (get_attr_length (insn) == 32)
-    output_asm_insn (\"ldi 4096,%%r31\;{comb|cmpb},<<,n %%r26,%%r31,.+16\",
-		     NULL);
-  else if (get_attr_length (insn) == 40)
-    output_asm_insn (\"ldi 4096,%%r31\;{comb|cmpb},<<,n %%r26,%%r31,.+24\",
-		     NULL);
-  else if (get_attr_length (insn) == 44)
-    output_asm_insn (\"ldi 4096,%%r31\;{comb|cmpb},<<,n %%r26,%%r31,.+28\",
-		     NULL);
-  else
-    output_asm_insn (\"ldi 4096,%%r31\;{comb|cmpb},<<,n %%r26,%%r31,.+12\",
-		     NULL);
+     4096, then again we use %r26 unchanged.  */
+  output_asm_insn (\"{comb|cmpb},<<,n %%r26,%%r31,.+%1\", xoperands);
 
-  /* Else call $$sh_func_adrs to extract the function's real add24.  */
+  /* Finally, call $$sh_func_adrs to extract the function's real add24.  */
   return output_millicode_call (insn,
 				gen_rtx_SYMBOL_REF (SImode,
-					 \"$$sh_func_adrs\"));
+						    \"$$sh_func_adrs\"));
 }"
   [(set_attr "type" "multi")
-   (set (attr "length")
-     (cond [
-;; Target (or stub) within reach
-            (and (lt (plus (symbol_ref "total_code_bytes") (pc))
-                     (const_int 240000))
-                 (eq (symbol_ref "TARGET_PORTABLE_RUNTIME")
-                     (const_int 0)))
-            (const_int 28)
-
-;; Out of reach PIC
-	    (ne (symbol_ref "flag_pic")
-		(const_int 0))
-	    (const_int 44)
-
-;; Out of reach PORTABLE_RUNTIME
-	    (ne (symbol_ref "TARGET_PORTABLE_RUNTIME")
-		(const_int 0))
-	    (const_int 40)]
-
-;; Out of reach, can use ble
-          (const_int 32)))])
+   (set (attr "length") (symbol_ref "attr_length_millicode_call (insn, 20)"))])
 
 ;; On the PA, the PIC register is call clobbered, so it must
 ;; be saved & restored around calls by the caller.  If the call
Index: config/pa/som.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/som.h,v
retrieving revision 1.38
diff -u -3 -p -r1.38 som.h
--- config/pa/som.h	29 Aug 2002 21:16:35 -0000	1.38
+++ config/pa/som.h	30 Oct 2002 17:06:46 -0000
@@ -371,3 +371,7 @@ do {						\
    on the location of the GCC tool directory.  The downside is GCC
    cannot be moved after installation using a symlink.  */
 #define ALWAYS_STRIP_DOTDOT 1
+
+/* Aggregates with a single float or double field should be passed and
+   returned in the general registers.  */
+#define MEMBER_TYPE_FORCES_BLK(FIELD, MODE) (MODE==SFmode || MODE==DFmode)
Index: config/pa/t-pa64
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/t-pa64,v
retrieving revision 1.6
diff -u -3 -p -r1.6 t-pa64
--- config/pa/t-pa64	30 Apr 2002 19:47:38 -0000	1.6
+++ config/pa/t-pa64	30 Oct 2002 17:06:46 -0000
@@ -1,4 +1,4 @@
-TARGET_LIBGCC2_CFLAGS = -fPIC -Dpa64=1 -DELF=1
+TARGET_LIBGCC2_CFLAGS = -fPIC -Dpa64=1 -DELF=1 -mlong-calls
 
 LIB2FUNCS_EXTRA=quadlib.c
 
Index: doc/invoke.texi
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/doc/invoke.texi,v
retrieving revision 1.196
diff -u -3 -p -r1.196 invoke.texi
--- doc/invoke.texi	20 Oct 2002 19:18:30 -0000	1.196
+++ doc/invoke.texi	30 Oct 2002 17:06:48 -0000
@@ -508,7 +508,7 @@ in the following sections.
 -march=@var{architecture-type} @gol
 -mbig-switch  -mdisable-fpregs  -mdisable-indexing @gol
 -mfast-indirect-calls  -mgas  -mgnu-ld -mhp-ld @gol
--mjump-in-delay -mlinker-opt @gol
+-mjump-in-delay -mlinker-opt -mlong-calls @gol
 -mlong-load-store  -mno-big-switch  -mno-disable-fpregs @gol
 -mno-disable-indexing  -mno-fast-indirect-calls  -mno-gas @gol
 -mno-jump-in-delay  -mno-long-load-store @gol
@@ -8093,6 +8093,33 @@ ld.  The ld that is called is determined
 configure option, gcc's program search path, and finally by the user's
 @env{PATH}.  The linker used by GCC can be printed using @samp{which
 `gcc -print-prog-name=ld`}.
+
+@item -mlong-calls
+@opindex mno-long-calls
+Generate code that uses long call sequences.  This ensures that a call
+is always able to reach linker generated stubs.  The default is to generate
+long calls only when the distance from the call site to the beginning
+of the function or translation unit, as the case may be, exceeds a
+predefined limit set by the branch type being used.  The limits for
+normal calls are 7,600,000 and 240,000 bytes, respectively for the
+PA 2.0 and PA 1.X architectures.  Sibcalls are always limited at
+240,000 bytes.
+
+Distances are measured from the beginning of functions when using the
+@option{-ffunction-sections} option, or when using the @option{-mgas}
+and @option{-mno-portable-runtime} options together under HP-UX with
+the SOM linker.
+
+It is normally not desirable to use this option as it will degrade
+performance.  However, it may be useful in large applications,
+particularly when partial linking is used to build the application.
+
+The types of long calls used depends on the capabilities of the
+assembler and linker, and the type of code being generated.  The
+impact on systems that support long absolute calls, and long pic
+symbol-difference or pc-relative calls should be relatively small.
+However, an indirect call is used on 32-bit ELF systems in pic code
+and it is quite long.
 
 @end table
 

Re: C++ PATCH: ABI bug for vcall offsets

[John David Anglin]

> I noticed today a new fail on hppa64-hp-hpux11.11, vthunk3.C.  It fails
> scan-assembler _ZTvn4_n20_N1E1bEv.  This doesn't seem like the correct
> symbol name to test for on a 64-bit target.  I see _ZTvn8_n40_N1E1bEv or

This might also be the reason why 

FAIL: g++.dg/abi/vague1.C scan-assembler-not _ZN1AIiE1tE

fails.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ PATCH: ABI bug for vcall offsets

[John David Anglin]

> This might also be the reason why 
> 
> FAIL: g++.dg/abi/vague1.C scan-assembler-not _ZN1AIiE1tE

No, it's because there is a .IMPORT/.type directive for _ZN1AIiE1tE
in the assembler file.  It needs to be XFAILed on HPPA HPUX.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: C++ PATCH: ABI bug for vcall offsets

[Mark Mitchell]

--On Saturday, November 09, 2002 06:18:41 PM -0500 John David Anglin 
<dave@hiauly1.hia.nrc.ca> wrote:

>> I noticed today a new fail on hppa64-hp-hpux11.11, vthunk3.C.  It fails
>> scan-assembler _ZTvn4_n20_N1E1bEv.  This doesn't seem like the correct
>> symbol name to test for on a 64-bit target.  I see _ZTvn8_n40_N1E1bEv or

Yes; I should have had an x86-only flag in there.  Fixed with the attached
patch, applied on the mainline.

> This might also be the reason why
>
> FAIL: g++.dg/abi/vague1.C scan-assembler-not _ZN1AIiE1tE

No; that looks like something different to me.

-- 
Mark Mitchell                mark@codesourcery.com
CodeSourcery, LLC            http://www.codesourcery.com

2002-11-10  Mark Mitchell  <mark@codesourcery.com>

	* g++.dg/abi/vthunk3.C: Run only on x86.

Index: vthunk3.C
===================================================================
RCS file: /cvs/gcc/gcc/gcc/testsuite/g++.dg/abi/vthunk3.C,v
retrieving revision 1.1
retrieving revision 1.2
diff -c -5 -p -r1.1 -r1.2
*** vthunk3.C	8 Nov 2002 02:16:48 -0000	1.1
--- vthunk3.C	11 Nov 2002 02:20:37 -0000	1.2
***************
*** 1,6 ****
! // { dg-do compile }
  // { dg-options "-fabi-version=0" }

  struct A {
    virtual void a ();
  };
--- 1,6 ----
! // { dg-do compile { target i?86-*-* } }
  // { dg-options "-fabi-version=0" }

  struct A {
    virtual void a ();
  };

Re: C++ PATCH: ABI bug for vcall offsets

[John David Anglin]

> > This might also be the reason why
> >
> > FAIL: g++.dg/abi/vague1.C scan-assembler-not _ZN1AIiE1tE
> 
> No; that looks like something different to me.

From examination of the assembler output, my understanding of why this
fails on hppa*-*-hpux* is that the symbol occurs in the assembler output
because we define ASM_OUTPUT_EXTERNAL to provide the correct type for
undefined external references.  This happens even for symbols that
eventually turn out not to be needed.

The enclosed patch avoids the fail.  It's not ideal but I doubt it's
worth the effort to try eliminate references in .import/.type directives.

Ok for main?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-11-10  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* g++.dg/abi/vague1.C (dg-final): Return if target is hppa*-*-hpux*.

Index: g++.dg/abi/vague1.C
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/testsuite/g++.dg/abi/vague1.C,v
retrieving revision 1.1
diff -u -3 -p -r1.1 vague1.C
--- g++.dg/abi/vague1.C	15 Mar 2002 09:54:42 -0000	1.1
+++ g++.dg/abi/vague1.C	11 Nov 2002 03:28:39 -0000
@@ -2,7 +2,9 @@
 // instantiations.
 
 // Disable debug info so we don't get confused by the symbol name there.
+// The test fails on hppa*-*-hpux* because the symbol _ZN1AIiE1tE is imported.
 // { dg-options "-g0" }
+// { dg-final { if { [istarget hppa*-*-hpux*] } { return } } }
 // { dg-final { scan-assembler-not "_ZN1AIiE1tE" } }
 
 template <class T> struct A {

Re: gcc-64 20021111 broken on HP-UX 11.00

[John David Anglin]

> > ldd: "gengenrtl" is not a shared executable.
> > collect2: /usr/ccs/bin/ldd returned 1 exit status
> 
> I have installed the patch below and it should fix the above problem.

I forgot to say it was tested with both HP and GNU ld on hppa64-hp-hpux11.11.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Unreviewed patch

[John David Anglin]

See

<http://gcc.gnu.org/ml/gcc-patches/2002-11/msg00105.html>.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: PATCH: Fix handling of return values handled in PARALLELs

[John David Anglin]

> 2002-11-26  John David Anglin  <dave@hiauly1.hia.nrc.ca>
> 
> 	* expr.c (gen_group_rtx, emit_group_move): New functions.
> 	* expr.h (gen_group_rtx, emit_group_move): Prototype.
> 	* function.c (expand_function_start): Use gen_group_rtx to create a
> 	PARALLEL rtx to hold the return value when the real return rtx is a
> 	PARALLEL.
> 	(expand_function_end): Use emit_group_move to move the return value
> 	from a PARALLEL to the real return registers.
> 	* rtl.h (REG_FUNCTION_VALUE_P): Allow function values to be returned
> 	in PARALLELs.

Oops, I managed to lose the initialization of the first vector component
when the src is NULL.  Doesn't affect hppa64-hp-hpux11 as it doesn't use
this feature.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-11-26  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* expr.c (gen_group_rtx, emit_group_move): New functions.
	* expr.h (gen_group_rtx, emit_group_move): Prototype.
	* function.c (expand_function_start): Use gen_group_rtx to create a
	PARALLEL rtx to hold the return value when the real return rtx is a
	PARALLEL.
	(expand_function_end): Use emit_group_move to move the return value
	from a PARALLEL to the real return registers.
	* rtl.h (REG_FUNCTION_VALUE_P): Allow function values to be returned
	in PARALLELs.

Index: expr.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/expr.c,v
retrieving revision 1.493
diff -u -3 -p -r1.493 expr.c
--- expr.c	20 Nov 2002 21:52:58 -0000	1.493
+++ expr.c	26 Nov 2002 23:09:33 -0000
@@ -2203,6 +2203,42 @@ move_block_from_reg (regno, x, nregs, si
     }
 }
 
+/* Generate a PARALLEL rtx for a new non-consecutive group of registers from
+   ORIG, where ORIG is a non-consecutive group of registers represented by
+   a PARALLEL.  The clone is identical to the original except in that the
+   original set of registers is replaced by a new set of pseudo registers.
+   The new set has the same modes as the original set.  */
+
+rtx
+gen_group_rtx (orig)
+     rtx orig;
+{
+  int i, length;
+  rtx *tmps;
+
+  if (GET_CODE (orig) != PARALLEL)
+    abort ();
+
+  length = XVECLEN (orig, 0);
+  tmps = (rtx *) alloca (sizeof (rtx) * length);
+
+  /* Skip a NULL entry in first slot.  */
+  i = XEXP (XVECEXP (orig, 0, 0), 0) ? 0 : 1;
+
+  if (i)
+    tmps[0] = 0;
+
+  for (; i < length; i++)
+    {
+      enum machine_mode mode = GET_MODE (XEXP (XVECEXP (orig, 0, i), 0));
+      rtx offset = XEXP (XVECEXP (orig, 0, i), 1);
+
+      tmps[i] = gen_rtx_EXPR_LIST (VOIDmode, gen_reg_rtx (mode), offset);
+    }
+
+  return gen_rtx_PARALLEL (GET_MODE (orig), gen_rtvec_v (length, tmps));
+}
+
 /* Emit code to move a block SRC to a block DST, where DST is non-consecutive
    registers represented by a PARALLEL.  SSIZE represents the total size of
    block SRC in bytes, or -1 if not known.  */
@@ -2322,6 +2358,26 @@ emit_group_load (dst, orig_src, ssize)
   /* Copy the extracted pieces into the proper (probable) hard regs.  */
   for (i = start; i < XVECLEN (dst, 0); i++)
     emit_move_insn (XEXP (XVECEXP (dst, 0, i), 0), tmps[i]);
+}
+
+/* Emit code to move a block SRC to block DST, where SRC and DST are
+   non-consecutive groups of registers, each represented by a PARALLEL.  */
+
+void
+emit_group_move (dst, src)
+     rtx dst, src;
+{
+  int i;
+
+  if (GET_CODE (src) != PARALLEL
+      || GET_CODE (dst) != PARALLEL
+      || XVECLEN (src, 0) != XVECLEN (dst, 0))
+    abort ();
+
+  /* Skip first entry if NULL.  */
+  for (i = XEXP (XVECEXP (src, 0, 0), 0) ? 0 : 1; i < XVECLEN (src, 0); i++)
+    emit_move_insn (XEXP (XVECEXP (dst, 0, i), 0),
+		    XEXP (XVECEXP (src, 0, i), 0));
 }
 
 /* Emit code to move a block SRC to a block DST, where SRC is non-consecutive
Index: expr.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/expr.h,v
retrieving revision 1.123
diff -u -3 -p -r1.123 expr.h
--- expr.h	22 Sep 2002 14:09:31 -0000	1.123
+++ expr.h	26 Nov 2002 23:09:34 -0000
@@ -412,9 +412,16 @@ extern void move_block_to_reg PARAMS ((i
    The number of registers to be filled is NREGS.  */
 extern void move_block_from_reg PARAMS ((int, rtx, int, int));
 
+/* Generate a non-consecutive group of registers represented by a PARALLEL.  */
+extern rtx gen_group_rtx PARAMS ((rtx));
+
 /* Load a BLKmode value into non-consecutive registers represented by a
    PARALLEL.  */
 extern void emit_group_load PARAMS ((rtx, rtx, int));
+
+/* Move a non-consecutive group of registers represented by a PARALLEL into
+   a non-consecutive group of registers represented by a PARALLEL.  */
+extern void emit_group_move PARAMS ((rtx, rtx));
 
 /* Store a BLKmode value from non-consecutive registers represented by a
    PARALLEL.  */
Index: function.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/function.c,v
retrieving revision 1.387
diff -u -3 -p -r1.387 function.c
--- function.c	14 Oct 2002 21:19:04 -0000	1.387
+++ function.c	26 Nov 2002 23:09:36 -0000
@@ -6559,18 +6559,17 @@ expand_function_start (subr, parms_have_
 			       subr, 1);
 
       /* Structures that are returned in registers are not aggregate_value_p,
-	 so we may see a PARALLEL.  Don't play pseudo games with this.  */
-      if (! REG_P (hard_reg))
-	SET_DECL_RTL (DECL_RESULT (subr), hard_reg);
+	 so we may see a PARALLEL or a REG.  */
+      if (REG_P (hard_reg))
+	SET_DECL_RTL (DECL_RESULT (subr), gen_reg_rtx (GET_MODE (hard_reg)));
+      else if (GET_CODE (hard_reg) == PARALLEL)
+	SET_DECL_RTL (DECL_RESULT (subr), gen_group_rtx (hard_reg));
       else
-	{
-	  /* Create the pseudo.  */
-	  SET_DECL_RTL (DECL_RESULT (subr), gen_reg_rtx (GET_MODE (hard_reg)));
+	abort ();
 
-	  /* Needed because we may need to move this to memory
-	     in case it's a named return value whose address is taken.  */
-	  DECL_REGISTER (DECL_RESULT (subr)) = 1;
-	}
+      /* Set DECL_REGISTER flag so that expand_function_end will copy the
+	 result to the real return register(s).  */
+      DECL_REGISTER (DECL_RESULT (subr)) = 1;
     }
 
   /* Initialize rtx for parameters and local variables.
@@ -6998,8 +6997,16 @@ expand_function_end (filename, line, end
 	      convert_move (real_decl_rtl, decl_rtl, unsignedp);
 	    }
 	  else if (GET_CODE (real_decl_rtl) == PARALLEL)
-	    emit_group_load (real_decl_rtl, decl_rtl,
-			     int_size_in_bytes (TREE_TYPE (decl_result)));
+	    {
+	      /* If expand_function_start has created a PARALLEL for decl_rtl,
+		 move the result to the real return registers.  Otherwise, do
+		 a group load from decl_rtl for a named return.  */
+	      if (GET_CODE (decl_rtl) == PARALLEL)
+		emit_group_move (real_decl_rtl, decl_rtl);
+	      else
+		emit_group_load (real_decl_rtl, decl_rtl,
+				 int_size_in_bytes (TREE_TYPE (decl_result)));
+	    }
 	  else
 	    emit_move_insn (real_decl_rtl, decl_rtl);
 	}
Index: rtl.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/rtl.h,v
retrieving revision 1.374
diff -u -3 -p -r1.374 rtl.h
--- rtl.h	4 Nov 2002 16:57:03 -0000	1.374
+++ rtl.h	26 Nov 2002 23:09:36 -0000
@@ -185,7 +185,7 @@ struct rtx_def GTY((chain_next ("RTX_NEX
      has used it as the function.  */
   unsigned int used : 1;
   /* Nonzero if this rtx came from procedure integration.
-     1 in a REG means this reg refers to the return value
+     1 in a REG or PARALLEL means this rtx refers to the return value
      of the current function.
      1 in a SYMBOL_REF if the symbol is weak.  */
   unsigned integrated : 1;
@@ -988,9 +988,10 @@ enum label_kind
 #define REGNO(RTX) XCUINT (RTX, 0, REG)
 #define ORIGINAL_REGNO(RTX) X0UINT (RTX, 1)
 
-/* 1 if RTX is a reg that is the current function's return value.  */
+/* 1 if RTX is a reg or parallel that is the current function's return
+   value.  */
 #define REG_FUNCTION_VALUE_P(RTX)					\
-  (RTL_FLAG_CHECK1("REG_FUNCTION_VALUE_P", (RTX), REG)->integrated)
+  (RTL_FLAG_CHECK2("REG_FUNCTION_VALUE_P", (RTX), REG, PARALLEL)->integrated)
 
 /* 1 if RTX is a reg that corresponds to a variable declared by the user.  */
 #define REG_USERVAR_P(RTX)						\

Re: PATCH: Fix handling of return values handled in PARALLELs

[Richard Henderson]

On Tue, Nov 26, 2002 at 06:41:14PM -0500, John David Anglin wrote:
> 	* expr.c (gen_group_rtx, emit_group_move): New functions.
> 	* expr.h (gen_group_rtx, emit_group_move): Prototype.
> 	* function.c (expand_function_start): Use gen_group_rtx to create a
> 	PARALLEL rtx to hold the return value when the real return rtx is a
> 	PARALLEL.
> 	(expand_function_end): Use emit_group_move to move the return value
> 	from a PARALLEL to the real return registers.
> 	* rtl.h (REG_FUNCTION_VALUE_P): Allow function values to be returned
> 	in PARALLELs.

Ok.


r~

Re: clean up some hook routines

[John David Anglin]

> ../../gcc/gcc/config/pa/pa.c -o pa.o
> ../../gcc/gcc/config/pa/pa.c:206: error: `default_comp_type_attributes' undeclared here (not in a function)

This appears to a problem with the updating of anoncvs@subversions.gnu.org.
Possibly, the problem will disappear at the next update.  The changes to
target-def.h aren't there yet.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: HP-UX PA long double alignment change

[John David Anglin]

> >From my reading of the documentation, I think you need both.
> I wonder if GET_MODE_ALIGNMENT could be redefined?

I have tested the following on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11.
There are no regressions and it reduces the alignment of long doubles in a
simple manner.  However, it does require modifying machmode.h to allow
defining GET_MODE_ALIGNMENT in the target headers.

Is this ok for main?

Sorry Steve, I didn't mean to usurp your work.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-12-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* machmode.h (GET_MODE_ALIGNMENT): Don't define if already defined.
	* pa.h (GET_MODE_ALIGNMENT): Define to obtain 64-bit alignment for
	TFmode on non 64-bit ports.

Index: machmode.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/machmode.h,v
retrieving revision 1.31
diff -u -3 -p -r1.31 machmode.h
--- machmode.h	1 Nov 2002 09:35:24 -0000	1.31
+++ machmode.h	4 Dec 2002 19:13:33 -0000
@@ -159,7 +159,9 @@ extern enum machine_mode get_best_mode P
 
 extern unsigned get_mode_alignment PARAMS ((enum machine_mode));
 
+#ifndef GET_MODE_ALIGNMENT
 #define GET_MODE_ALIGNMENT(MODE) get_mode_alignment (MODE)
+#endif
 
 /* For each class, get the narrowest mode in that class.  */
 
Index: config/pa/pa.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa.h,v
retrieving revision 1.176
diff -u -3 -p -r1.176 pa.h
--- config/pa/pa.h	27 Nov 2002 02:34:15 -0000	1.176
+++ config/pa/pa.h	4 Dec 2002 19:13:36 -0000
@@ -478,6 +478,11 @@ do {								\
    to 128 bits to allow for lock semaphores in the stack frame.*/
 #define BIGGEST_ALIGNMENT 128
 
+/* TFmode data only needs 64-bit alignment on non 64-bit ports.  */
+#undef GET_MODE_ALIGNMENT
+#define GET_MODE_ALIGNMENT(MODE) \
+  (!TARGET_64BIT && (MODE) == TFmode ? 64 : get_mode_alignment (MODE))
+
 /* Get around hp-ux assembler bug, and make strcpy of constants fast.  */
 #define CONSTANT_ALIGNMENT(CODE, TYPEALIGN) \
   ((TYPEALIGN) < 32 ? 32 : (TYPEALIGN))

Re: HP-UX PA long double alignment change

[Steve Ellcey]

> > >From my reading of the documentation, I think you need both.
> > I wonder if GET_MODE_ALIGNMENT could be redefined?
> 
> I have tested the following on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11.
> There are no regressions and it reduces the alignment of long doubles in a
> simple manner.  However, it does require modifying machmode.h to allow
> defining GET_MODE_ALIGNMENT in the target headers.
> 
> Is this ok for main?
> 
> Sorry Steve, I didn't mean to usurp your work.
> 
> Dave

That's quite alright with me.  This looks simpler then changing both
ADJUST_FIELD_ALIGN and DATA_ALIGNMENT (and possibly LOCAL_ALIGNMENT) to
get them all to match up.

Steve

Re: HP-UX PA long double alignment change

[John David Anglin]

> So if I understand correctly, you are suggesting that we drop
> BIGGEST_ALIGNMENT back to 64 and increase STACK_BOUNDARY to 128.
> I think then the STARTING_FRAME_OFFSET would have to increase
> to 16.  Otherwise, we never have a zero frame size.  This will
> add two more unused slots in the stack frame which I don't much
> like.

In the discussion that led to the original change, Richard wrote:

> On Fri, Jan 18, 2002 at 06:35:40PM -0800, Aldy Hernandez wrote:
> > this patch introduces a new macro STARTING_FRAME_PHASE (documented).
> 
> There is no need for a new macro.  The frame pointer _must_ be
> aligned, as we assert here:
> 
> emit-rtl.c:4719:  REGNO_POINTER_ALIGN (FRAME_POINTER_REGNUM) = STACK_BOUNDARY;
> 
> therefore it must always be the case that
> 
>   sb = STACK_BOUNDARY / BITS_PER_UNIT;
>   off = STARTING_FRAME_OFFSET % sb;
>
>   STARTING_FRAME_PHASE == (off ? sb - off : 0)

In diagnosing why we never had a zero frame size on hppa64, I found
that when STARTING_FRAME_PHASE % sb is non zero you can never get a
frame size of zero.  This seems like a bug as it wastes stack space
if you increase STARTING_FRAME_OFFSET so that off==0.

dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [PATCH] Fix RTL sharing problem in CSE

[John David Anglin]

> > 2003-01-16  Roger Sayle  <roger@eyesopen.com>
> > 
> > 	* cse.c (cse_insn): Avoid RTL sharing when updating the RETVAL
> > 	insn's notes following a substitution inside a libcall.
> 
> This doesn't fix the hppa64 problem.  I will try to investigate further.

This is the insn that causes the ICE:

regclass.i.12.loop:
(insn 599 598 600 0000000000000000 (set (reg:DI 263)
        (mult:DI (zero_extend:DI (subreg:SI (reg:DI 262) 4))
	    (zero_extend:DI (subreg:SI (reg/v:DI 157) 4)))) -1 (nil)
	(nil))

regclass.i.13.bypass:
(insn 599 598 600 21 0000000000000000 (set (reg:DI 263)
        (mult:DI (zero_extend:DI (subreg:SI (const_int -44 [0xffffffffffffffd4]) 4))
	    (zero_extend:DI (subreg:SI (reg/v:DI 157) 4)))) -1 (nil)
	(nil))

regclass.i.19.life:
(insn 599 598 600 18 0000000000000000 (set (reg:DI 263)
        (mult:DI (zero_extend:DI (subreg:SI (const_int -44 [0xffffffffffffffd4]) 4))
	    (zero_extend:DI (subreg:SI (reg/v:DI 157) 4)))) -1 (nil)
    (expr_list:REG_DEAD (reg/v:DI 157)
	(nil)))

The ICE occurs because combine tries to simplify it and it can't because
of the constant substitution in the regclass.i.13.bypass pass.  It would
seem to me that the subreg should be simplified when the substitution for
DI 262 is made.  After that, the mode information is lost.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [PATCH] Fix RTL sharing problem in CSE

[law]

In message <200301171715.h0HHFOL0006221@hiauly1.hia.nrc.ca>, "John David Anglin
" writes:
 >> > 2003-01-16  Roger Sayle  <roger@eyesopen.com>
 >> > 
 >> > 	* cse.c (cse_insn): Avoid RTL sharing when updating the RETVAL
 >> > 	insn's notes following a substitution inside a libcall.
 >> 
 >> This doesn't fix the hppa64 problem.  I will try to investigate further.
 >
 >This is the insn that causes the ICE:
 >
 >regclass.i.12.loop:
 >(insn 599 598 600 0000000000000000 (set (reg:DI 263)
 >        (mult:DI (zero_extend:DI (subreg:SI (reg:DI 262) 4))
 >	    (zero_extend:DI (subreg:SI (reg/v:DI 157) 4)))) -1 (nil)
 >	(nil))
 >
 >regclass.i.13.bypass:
 >(insn 599 598 600 21 0000000000000000 (set (reg:DI 263)
 >        (mult:DI (zero_extend:DI (subreg:SI (const_int -44 [0xffffffffffffffd
 >4]) 4))
 >	    (zero_extend:DI (subreg:SI (reg/v:DI 157) 4)))) -1 (nil)
 >	(nil))
 >
 >regclass.i.19.life:
 >(insn 599 598 600 18 0000000000000000 (set (reg:DI 263)
 >        (mult:DI (zero_extend:DI (subreg:SI (const_int -44 [0xffffffffffffffd
 >4]) 4))
 >	    (zero_extend:DI (subreg:SI (reg/v:DI 157) 4)))) -1 (nil)
 >    (expr_list:REG_DEAD (reg/v:DI 157)
 >	(nil)))
 >
 >The ICE occurs because combine tries to simplify it and it can't because
 >of the constant substitution in the regclass.i.13.bypass pass.  It would
 >seem to me that the subreg should be simplified when the substitution for
 >DI 262 is made.  After that, the mode information is lost.
Agreed.

jeff

Re: [PATCH] Fix RTL sharing problem in CSE

[Jan Hubicka]

> In message <200301171715.h0HHFOL0006221@hiauly1.hia.nrc.ca>, "John David Anglin
> " writes:
>  >> > 2003-01-16  Roger Sayle  <roger@eyesopen.com>
>  >> > 
>  >> > 	* cse.c (cse_insn): Avoid RTL sharing when updating the RETVAL
>  >> > 	insn's notes following a substitution inside a libcall.
>  >> 
>  >> This doesn't fix the hppa64 problem.  I will try to investigate further.
>  >
>  >This is the insn that causes the ICE:
>  >
>  >regclass.i.12.loop:
>  >(insn 599 598 600 0000000000000000 (set (reg:DI 263)
>  >        (mult:DI (zero_extend:DI (subreg:SI (reg:DI 262) 4))
>  >	    (zero_extend:DI (subreg:SI (reg/v:DI 157) 4)))) -1 (nil)
>  >	(nil))
>  >
>  >regclass.i.13.bypass:
>  >(insn 599 598 600 21 0000000000000000 (set (reg:DI 263)
>  >        (mult:DI (zero_extend:DI (subreg:SI (const_int -44 [0xffffffffffffffd
>  >4]) 4))
>  >	    (zero_extend:DI (subreg:SI (reg/v:DI 157) 4)))) -1 (nil)
>  >	(nil))
>  >
>  >regclass.i.19.life:
>  >(insn 599 598 600 18 0000000000000000 (set (reg:DI 263)
>  >        (mult:DI (zero_extend:DI (subreg:SI (const_int -44 [0xffffffffffffffd
>  >4]) 4))
>  >	    (zero_extend:DI (subreg:SI (reg/v:DI 157) 4)))) -1 (nil)
>  >    (expr_list:REG_DEAD (reg/v:DI 157)
>  >	(nil)))
>  >
>  >The ICE occurs because combine tries to simplify it and it can't because
>  >of the constant substitution in the regclass.i.13.bypass pass.  It would
>  >seem to me that the subreg should be simplified when the substitution for
>  >DI 262 is made.  After that, the mode information is lost.
> Agreed.
When replacement is made by validate_replace_reg, this is done
automatically.  I think bypass pass should use it consistently...

Honza
> 
> jeff

Re: [PATCH] Fix RTL sharing problem in CSE

[Roger Sayle]

Hi Jan and Jeff,
> >  >The ICE occurs because combine tries to simplify it and it can't because
> >  >of the constant substitution in the regclass.i.13.bypass pass.  It would
> >  >seem to me that the subreg should be simplified when the substitution for
> >  >DI 262 is made.  After that, the mode information is lost.
> > Agreed.
> When replacement is made by validate_replace_reg, this is done
> automatically.  I think bypass pass should use it consistently...

No new RTL modification code was introduced splitting GCSE and
moving the jump bypassing pass after the loop optimizations.
Even prior to that, jump bypassing itself only affects branch
instructions and doesn't modify RTL expressions at all.

I believe that the problems on hppa64 and powerpc will turn out to
be more latent bugs in the existing GCSE or CSE constant propagation
code, just like the one in cse_insn that it has already uncovered
on H8300.


I know the rules, and am more than happy to take responsibility
for latent bugs that are exposed by my changes.  If I'm right,
these fixes should also be applied to the 3.3 branch, as they'll
predate my recent changes.

Roger
--

Re: [PATCH] Fix RTL sharing problem in CSE

[David Edelsohn]

>>>>> Roger Sayle writes:

> I believe that the problems on hppa64 and powerpc will turn out to
> be more latent bugs in the existing GCSE or CSE constant propagation
> code, just like the one in cse_insn that it has already uncovered
> on H8300.

	This does appear to be the case for the PowerPC segfault.  After
further investigation, I can construct a simplified testcase which fails
with or without the jump bypass patch.  The jump bypass patch simply
causes the latent bug to occur in the complete version of the function
that appears in the benchmark.

David

Re: [PATCH] Fix RTL sharing problem in CSE

[Dale Johannesen]

On Friday, January 17, 2003, at 02:33  PM, David Edelsohn wrote:

>>>>>> Roger Sayle writes:
>
>> I believe that the problems on hppa64 and powerpc will turn out to
>> be more latent bugs in the existing GCSE or CSE constant propagation
>> code, just like the one in cse_insn that it has already uncovered
>> on H8300.
>
> 	This does appear to be the case for the PowerPC segfault.  After
> further investigation, I can construct a simplified testcase which 
> fails
> with or without the jump bypass patch.  The jump bypass patch simply
> causes the latent bug to occur in the complete version of the function
> that appears in the benchmark.

Right.  I've tracked this down to a lurker in the ppc-specific code.
Patch coming.

Re: [PATCH] Fix RTL sharing problem in CSE

[law]

In message <Pine.LNX.4.44.0301171112100.6779-100000@www.eyesopen.com>, Roger Sa
yle writes:
 >I believe that the problems on hppa64 and powerpc will turn out to
 >be more latent bugs in the existing GCSE or CSE constant propagation
 >code, just like the one in cse_insn that it has already uncovered
 >on H8300.
I agree completely.

It's worth noting that the code we're tripping in the PA backend is
notoriously flakey -- even more so for PA64.  If it wasn't such a 
huge win to use xmpyu I'd suggest we drop the damn thing.


Jeff

[PATCH]: Fix ICE in convert_move on PA

[John David Anglin]

> > > I have determined by elimination that the ifcvt pass reordering
> > > 
> > > Sat Oct 26 01:44:46 CEST 2002  Jan Hubicka  <jh@suse.cz>
> > > 
> > >         * toplev.c (dump_file_index): Add DFI_ce3.
> > > 	(dump_file_info): Likewise.
> > > 	(rest_of_compilation): Run first ifcvt pass before tracer.
> > > 
> > > results in the failure of g77.f-torture/execute/970625-2.f on the PA
> > > (hppa-unknown-linux-gnu, hppa2.0w-hp-hpux11* and hppa64-hp-hpux11*).
> > > 
> > > The following error occurs:
> > > 
> > > /home/dave/gcc-3.3/gcc/gcc/testsuite/g77.f-torture/execute/970625-2.f:74: internal compiler error: in convert_move, at expr.c:1303
> > > 
> > > We have
> > > Breakpoint 1, convert_move (to=0x401ba240, from=0x401ba270, unsignedp=0)
> > >     at ../../gcc/gcc/expr.c:1303
> > > 1303      abort ();
> > > (gdb) p debug_rtx (to)
> > > (reg:CCFP 142)
> > > $1 = void
> > > (gdb) p debug_rtx (from)
> > > (reg:SI 143)
> > Interesting.
> > This looks like latent PA bug uncovered, but I will try to check it next
> > week.

Here is a patch to fix the above.  It occurs as a result of the installation
of placeholders to set the CCFP register.  These were installed last
September to improve optimization of if statements on the PA.  Under some
circumstances, the CCFP register can become the destination for
the store flag from a general operand.  The enclosed patch restricts
setting the store flag to destinations with a mode class in MODE_INT.
Possibly, this is over restrictive but it seemed reasonable choice.

Tested on hppa64-hp-hpux11.11 with no regressions.

Ok for main and branch?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2003-01-18  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* ifcvt.c (noce_emit_store_flag): Don't emit store flag if mode class
	of destination is not MODE_INT.

Index: ifcvt.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/ifcvt.c,v
retrieving revision 1.105
diff -u -3 -p -r1.105 ifcvt.c
--- ifcvt.c	19 Sep 2002 01:07:10 -0000	1.105
+++ ifcvt.c	18 Jan 2003 21:09:28 -0000
@@ -645,8 +645,8 @@ noce_emit_store_flag (if_info, x, revers
       end_sequence ();
     }
 
-  /* Don't even try if the comparison operands are weird.  */
-  if (cond_complex)
+  /* Don't even try if the comparison operands or the mode of X are weird.  */
+  if (cond_complex || GET_MODE_CLASS (GET_MODE (x)) != MODE_INT)
     return NULL_RTX;
 
   return emit_store_flag (x, code, XEXP (cond, 0),

Re: [PATCH]: Fix ICE in convert_move on PA

[Richard Henderson]

On Sat, Jan 18, 2003 at 08:57:12PM -0500, John David Anglin wrote:
> 	* ifcvt.c (noce_emit_store_flag): Don't emit store flag if mode class
> 	of destination is not MODE_INT.

Use SCALAR_INT_MODE_P and this is ok.


r~

[PATCH] Fix find_reloads_address bug, take 2

[Ulrich Weigand]

I wrote originally:

>Secondly, if the condition hits, the code in question re-forms
>the address from
>  (plus (plus frame-pointer index) constant)
>to
>  (plus (plus frame-pointer constant) index)
>which is non-canonical RTL.  That would not be a problem if
>-as intended- the (plus frame-pointer constant) term got
>reloaded into a register.  However, find_reloads is called
>multiple times, and only after the last call will actual
>reloads be made.  Unfortunatly, this code segment will
>*modify* the passed-in address RTX in-place on *every*
>call of find_reloads.  This means after the return from
>the first find_reloads call out of calculate_needs_all_insns,
>the main insn stream will contain this piece of invalid RTL.

While this is correct, it actually does not really matter.
*If* the condition when to enter this block were correct,
the constant term would be invalid for an address.  This
can only happen if that constant was in fact introduced
by eliminate_regs_in_insn just before the call to find_reloads.

In that case, it does not matter that the address is
modified in place, as calculate_needs_all_insns will
throw away the insn body anway to get rid to the changes
done by eliminate_regs.

The reason why I am seeing the ICE on s390 is that this
block is entered -due to the incorrect condition- even
for addresses where the constant term is valid; such
addresses might have been in the insn stream even before
register elimination, and thus calculate_needs_all_insns
will not undo the modification ...

Thus, the only bug that needs to be fixed is in fact
the incorrect condition; the rest should be fine as is.

The following patch implements this, and also fixes a
stupid bug in the original patch: the lines 
!          && ! maybe_memory_address_p (mode, ad, &XEXP (XEXP (ad, 0), 0)))
and
!          && ! maybe_memory_address_p (mode, ad, &XEXP (XEXP (ad, 0), 1)))
need to be swapped, of course.

Also, I've included a test case that shows the ICE on s390.

Bootstrapped/regtested on s390-ibm-linux and s390x-ibm-linux,
on gcc 3.3 branch and mainline.

OK to apply?  Should this be considered for 3.2 as well?


ChangeLog:

gcc/
        * reload.c (maybe_memory_address_p): New function.
        (find_reloads_address): Use it instead of memory_address_p.

gcc/testsuite/
	* gcc.dg/20030123-1.c: New test.


Index: gcc/reload.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/reload.c,v
retrieving revision 1.178.2.4.2.4
diff -c -p -r1.178.2.4.2.4 reload.c
*** gcc/reload.c	24 Oct 2002 08:59:49 -0000	1.178.2.4.2.4
--- gcc/reload.c	23 Jan 2003 20:21:16 -0000
*************** static int alternative_allows_memconst P
*** 257,262 ****
--- 257,263 ----
  static rtx find_reloads_toplev	PARAMS ((rtx, int, enum reload_type, int,
  					 int, rtx, int *));
  static rtx make_memloc		PARAMS ((rtx, int));
+ static int maybe_memory_address_p PARAMS ((enum machine_mode, rtx, rtx *));
  static int find_reloads_address	PARAMS ((enum machine_mode, rtx *, rtx, rtx *,
  				       int, enum reload_type, int, rtx));
  static rtx subst_reg_equivs	PARAMS ((rtx, rtx));
*************** make_memloc (ad, regno)
*** 4545,4550 ****
--- 4546,4572 ----
    return tem;
  }
  
+ /* Returns true if AD could be turned into a valid memory reference
+    to mode MODE by reloading the part pointed to by PART into a 
+    register.  */
+ 
+ static int
+ maybe_memory_address_p (mode, ad, part)
+      enum machine_mode mode;
+      rtx ad;
+      rtx *part;
+ {
+   int retv;
+   rtx tem = *part;
+   rtx reg = gen_rtx_REG (GET_MODE (tem), max_reg_num ());
+ 
+   *part = reg;
+   retv = memory_address_p (mode, ad);
+   *part = tem;
+ 
+   return retv;
+ }
+ 
  /* Record all reloads needed for handling memory address AD
     which appears in *LOC in a memory reference to mode MODE
     which itself is found in location  *MEMREFLOC.
*************** find_reloads_address (mode, memrefloc, a
*** 4844,4850 ****
  	       || XEXP (XEXP (ad, 0), 0) == arg_pointer_rtx
  #endif
  	       || XEXP (XEXP (ad, 0), 0) == stack_pointer_rtx)
! 	   && ! memory_address_p (mode, ad))
      {
        *loc = ad = gen_rtx_PLUS (GET_MODE (ad),
  				plus_constant (XEXP (XEXP (ad, 0), 0),
--- 4866,4872 ----
  	       || XEXP (XEXP (ad, 0), 0) == arg_pointer_rtx
  #endif
  	       || XEXP (XEXP (ad, 0), 0) == stack_pointer_rtx)
! 	   && ! maybe_memory_address_p (mode, ad, &XEXP (XEXP (ad, 0), 1)))
      {
        *loc = ad = gen_rtx_PLUS (GET_MODE (ad),
  				plus_constant (XEXP (XEXP (ad, 0), 0),
*************** find_reloads_address (mode, memrefloc, a
*** 4869,4875 ****
  	       || XEXP (XEXP (ad, 0), 1) == arg_pointer_rtx
  #endif
  	       || XEXP (XEXP (ad, 0), 1) == stack_pointer_rtx)
! 	   && ! memory_address_p (mode, ad))
      {
        *loc = ad = gen_rtx_PLUS (GET_MODE (ad),
  				XEXP (XEXP (ad, 0), 0),
--- 4891,4897 ----
  	       || XEXP (XEXP (ad, 0), 1) == arg_pointer_rtx
  #endif
  	       || XEXP (XEXP (ad, 0), 1) == stack_pointer_rtx)
! 	   && ! maybe_memory_address_p (mode, ad, &XEXP (XEXP (ad, 0), 0)))
      {
        *loc = ad = gen_rtx_PLUS (GET_MODE (ad),
  				XEXP (XEXP (ad, 0), 0),
*** /dev/null	Thu Sep 19 11:33:10 2002
--- gcc/testsuite/gcc.dg/20030123-1.c	Thu Jan 23 21:27:33 2003
***************
*** 0 ****
--- 1,17 ----
+ /* This used to ICE due to a reload bug on s390*.  */
+ 
+ /* { dg-do compile { target s390*-*-* } } */
+ /* { dg-options "-O2" } */
+ 
+ void func (char *p);
+ 
+ void test (void)
+ {
+    char *p = alloca (4096);
+    long idx;
+ 
+    asm ("" : "=r" (idx) : : "1", "2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12");
+ 
+    func (p + idx + 1);
+ }
+ 


-- 
  Dr. Ulrich Weigand
  weigand@informatik.uni-erlangen.de

ping: Unreviewed patch to fix patch to fix bootstrap failure on PA

[John David Anglin]

This patch is needed to fix a problem arising from the rewrite of
libiberty/pexecute.c.  The rewrite changed pwait so that it now uses
waitpid instead of wait.  Would someone please review:

<http://gcc.gnu.org/ml/gcc-patches/2003-01/msg02069.html>.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: ping: Unreviewed patch to fix patch to fix bootstrap failure on PA

[Zack Weinberg]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

> This patch is needed to fix a problem arising from the rewrite of
> libiberty/pexecute.c.  The rewrite changed pwait so that it now uses
> waitpid instead of wait.  Would someone please review:
>
> <http://gcc.gnu.org/ml/gcc-patches/2003-01/msg02069.html>.

It looks good to me, but I can't approve it.

zw

Re: ping: Unreviewed patch to fix patch to fix bootstrap failure on PA

[Geoff Keating]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

> This patch is needed to fix a problem arising from the rewrite of
> libiberty/pexecute.c.  The rewrite changed pwait so that it now uses
> waitpid instead of wait.  Would someone please review:
> 
> <http://gcc.gnu.org/ml/gcc-patches/2003-01/msg02069.html>.

This is OK.

-- 
- Geoffrey Keating <geoffk@geoffk.org>

Re: hppa-linux regressions and 3.2.2 release

[John David Anglin]

> I now have tests running on hppa2.0w-hp-hpux11.11, hppa64-hp-hpux11.00
> and hppa-unknown-linux-gnu including the patch set for the other PR from
> Franz Sirl.  I will post the results as soon as available.

The hppa2.0w-hp-hpux11.11 are complete and identical to the previous
run without Franz's patch:

<http://gcc.gnu.org/ml/gcc-testresults/2003-02/msg00130.html>.

I had to restart the hppa64-hp-hpux11.00 run.  I used the HP linker
and it generates a warning on each link.  This totally messes
up the testsuite results.  I would like to apply the following patch
from Steve Ellcey to correct the problem.  It has been on the main and
3.3 since early last October.  The comment describes what it does.  It
only affects hppa64-hp-hpux11* and doesn't affect code generation.

As you are doing preleases, I will wait for your OK.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2003-02-02  Steve Ellcey  <sje@cup.hp.com>

        * config/pa/pa64-hpux.h (INIT_ENVIRONMENT): New.

Index: config/pa/pa64-hpux.h
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/config/pa/pa64-hpux.h,v
retrieving revision 1.9
diff -u -3 -p -r1.9 pa64-hpux.h
--- config/pa/pa64-hpux.h	21 Jan 2002 21:22:19 -0000	1.9
+++ config/pa/pa64-hpux.h	3 Feb 2003 04:38:07 -0000
@@ -232,3 +232,8 @@ do {								\
 #ifndef ASM_DECLARE_RESULT
 #define ASM_DECLARE_RESULT(FILE, RESULT)
 #endif
+
+/* If using HP ld do not call pxdb.  Use size as a program that does nothing
+   and returns 0.  /bin/true cannot be used because it is a script without
+   an interpreter.  */
+#define INIT_ENVIRONMENT "LD_PXDB=/usr/ccs/bin/size"

Re: hppa-linux regressions and 3.2.2 release

[Gabriel Dos Reis]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

[...]

| As you are doing preleases, I will wait for your OK.

It is OK.

Thanks,

-- Gaby

Re: hppa-linux regressions and 3.2.2 release

[John David Anglin]

> > I now have tests running on hppa2.0w-hp-hpux11.11, hppa64-hp-hpux11.00
> > and hppa-unknown-linux-gnu including the patch set for the other PR from
> > Franz Sirl.  I will post the results as soon as available.
> 
> The hppa2.0w-hp-hpux11.11 are complete and identical to the previous
> run without Franz's patch:

All test runs are complete and posted.  There are no regressions.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: hppa-linux regressions and 3.2.2 release

[Gabriel Dos Reis]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

| > > I now have tests running on hppa2.0w-hp-hpux11.11, hppa64-hp-hpux11.00
| > > and hppa-unknown-linux-gnu including the patch set for the other PR from
| > > Franz Sirl.  I will post the results as soon as available.
| > 
| > The hppa2.0w-hp-hpux11.11 are complete and identical to the previous
| > run without Franz's patch:
| 
| All test runs are complete and posted.  There are no regressions.

Thanks for the report.  Please commit the set of patches you tested.

This hopefully will be the last patch to commit.

-- Gaby

Re: hppa-linux regressions and 3.2.2 release

[John David Anglin]

> Thanks for the report.  Please commit the set of patches you tested.

Done.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Mainline bootstrap failure on hppa2.0w-hp-hpux11.00

[John David Anglin]

> > I'm getting a bootstrap failure on HPUX with current CVS mainline,
> > probably caused by the recent "-Werror" change.

This may have been obvious but you can avoid the error until the problem
is fixed by configuring with "--disable-werror".

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Mainline bootstrap failure on hppa2.0w-hp-hpux11.00

[John David Anglin]

> I don't have exact information but I assume that it is the same as
> isspace.  It returns a non zero integer, not necessarily 1.

That's for true.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Mainline bootstrap failure on hppa2.0w-hp-hpux11.00

[John David Anglin]

> I read in 6.3.1.8 which discusses the usual arithmetic conversions,
> 
> 	Otherwise, if the type of the operand with the signed integer
> 	can represent all of the values of the type of the operand
> 	with unsigned integer type, then the operand with unsigned
> 	integer type is converted to the type of the operand with
> 	signed integer type.
> 
> It seems as if this would apply to the case in question.  Do we

Thinking more, I am confused and it doesn't apply.  While the integer
type can represent all possible values of the unsigned expression, it
can't represent all the values of the unsigned type.  So, the latter
conversion would apply and I guess a warning should be generated,
although gcc should know the conversion is safe.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Mainline bootstrap failure on hppa2.0w-hp-hpux11.00

[Kaveh R. Ghazi]

 > From: "John David Anglin" <dave@hiauly1.hia.nrc.ca>
 > 
 > > I read in 6.3.1.8 which discusses the usual arithmetic conversions,
 > > 
 > > 	Otherwise, if the type of the operand with the signed integer
 > > 	can represent all of the values of the type of the operand
 > > 	with unsigned integer type, then the operand with unsigned
 > > 	integer type is converted to the type of the operand with
 > > 	signed integer type.
 > > 
 > > It seems as if this would apply to the case in question.  Do we
 > 
 > Thinking more, I am confused and it doesn't apply.  While the integer
 > type can represent all possible values of the unsigned expression, it
 > can't represent all the values of the unsigned type.  So, the latter
 > conversion would apply and I guess a warning should be generated,

Correct, i.e.

This will warn:		expr ? unsigned int : int;

This won't:		expr ? unsigned char : int;

The case under discussion is of the first form, even though the range
of values is constrained with &.


 > although gcc should know the conversion is safe.
 > Dave

How?  GCC can't "know" the conversion is safe.  The unsigned qty has a
small range, but it's still an unsigned int type, so C mandates that
the int qty (_isspace) gets promoted.  GCC doesn't know the range of
the int, that's the problem.  If GCC knew _isspace was never negative,
we wouldn't warn, same as with int constants like "1".  Knowing that
the unsigned portion is a small number doesn't help.

		--Kaveh
--
Kaveh R. Ghazi			ghazi@caip.rutgers.edu

Re: Bootstrap failure on hppa-unknown-linux-gnu, trunk

[John David Anglin]

> stage1/xgcc -Bstage1/ -B/home/dave/opt/gnu/hppa-linux/bin/ -c   -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long -fno-common -Werror   -DHAVE_CONFIG_H    -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include
> ../../gcc/gcc/bb-reorder.c -o bb-reorder.o
> ../../gcc/gcc/bb-reorder.c: In function `find_traces':
> ../../gcc/gcc/bb-reorder.c:219: error: unrecognizable insn:
> (insn 776 775 777 0x40568f60 (set (reg:DI 70 %fr23 [252])
> 	(mult:DI (zero_extend:DI (reg:SI 69 %fr22R [246]))
> 	    (reg:DI 74 %fr25))) -1 (nil)
>    (expr_list:REG_UNUSED (reg:SI 71 %fr23R)
> 	(expr_list:REG_DEAD (reg:DI 74 %fr25)
> 	    (nil))))
> ../../gcc/gcc/bb-reorder.c:219: internal compiler error: in num_delay_slots, at insn-attrtab.c:4085

I have determined that it is the addition of this patch that results in
the above ICE:

2003-02-10  Josef Zlomek  <zlomekj@suse.cz>

	* Makefile.in (bb-reorder.o): Add dependency on $(FIBHEAP_H).
	* bb-reorder.c (make_reorder_chain): Deleted.
	(make_reorder_chain_1): Deleted.
	(find_traces): New function.
	(rotate_loop): New function.
	(mark_bb_visited): New function.
	(find_traces_1_round): New function.
	(copy_bb): New function.
	(bb_to_key): New function.
	(better_edge_p): New function.
	(connect_traces): New function.
	(copy_bb_p): New function.
	(get_uncond_jump_length): New function.
	(reorder_basic_blocks): Use new functions (Software Trace Cache).
	* cfgcleanup.c (outgoing_edges_match): Enable crossjumping across loop
	boundaries.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Bootstrap failure on hppa-unknown-linux-gnu, trunk

[Josef Zlomek]

> > stage1/xgcc -Bstage1/ -B/home/dave/opt/gnu/hppa-linux/bin/ -c   -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long -fno-common -Werror   -DHAVE_CONFIG_H    -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include
> > ../../gcc/gcc/bb-reorder.c -o bb-reorder.o
> > ../../gcc/gcc/bb-reorder.c: In function `find_traces':
> > ../../gcc/gcc/bb-reorder.c:219: error: unrecognizable insn:
> > (insn 776 775 777 0x40568f60 (set (reg:DI 70 %fr23 [252])
> > 	(mult:DI (zero_extend:DI (reg:SI 69 %fr22R [246]))
> > 	    (reg:DI 74 %fr25))) -1 (nil)
> >    (expr_list:REG_UNUSED (reg:SI 71 %fr23R)
> > 	(expr_list:REG_DEAD (reg:DI 74 %fr25)
> > 	    (nil))))
> > ../../gcc/gcc/bb-reorder.c:219: internal compiler error: in num_delay_slots, at insn-attrtab.c:4085
> 
> I have determined that it is the addition of this patch that results in
> the above ICE:
> 
> 2003-02-10  Josef Zlomek  <zlomekj@suse.cz>
> 
> 	* Makefile.in (bb-reorder.o): Add dependency on $(FIBHEAP_H).
> 	* bb-reorder.c (make_reorder_chain): Deleted.
> 	(make_reorder_chain_1): Deleted.
> 	(find_traces): New function.
> 	(rotate_loop): New function.
> 	(mark_bb_visited): New function.
> 	(find_traces_1_round): New function.
> 	(copy_bb): New function.
> 	(bb_to_key): New function.
> 	(better_edge_p): New function.
> 	(connect_traces): New function.
> 	(copy_bb_p): New function.
> 	(get_uncond_jump_length): New function.
> 	(reorder_basic_blocks): Use new functions (Software Trace Cache).
> 	* cfgcleanup.c (outgoing_edges_match): Enable crossjumping across loop
> 	boundaries.

I apologize for the breakage. It seems that new bb-reorder has uncovered
bugs in machine descriptions.
Honza Hubicka has checked in a patch
(http://gcc.gnu.org/ml/gcc-patches/2003-02/msg00847.html)
which hopefully should enable gcc to bootstrap again.

Josef

Re: Bootstrap failure on hppa-unknown-linux-gnu, trunk

[John David Anglin]

> > > stage1/xgcc -Bstage1/ -B/home/dave/opt/gnu/hppa-linux/bin/ -c   -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long -fno-common -Werror   -DHAVE_CONFIG_H    -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include
> > > ../../gcc/gcc/bb-reorder.c -o bb-reorder.o
> > > ../../gcc/gcc/bb-reorder.c: In function `find_traces':
> > > ../../gcc/gcc/bb-reorder.c:219: error: unrecognizable insn:
> > > (insn 776 775 777 0x40568f60 (set (reg:DI 70 %fr23 [252])
> > > 	(mult:DI (zero_extend:DI (reg:SI 69 %fr22R [246]))
> > > 	    (reg:DI 74 %fr25))) -1 (nil)
> > >    (expr_list:REG_UNUSED (reg:SI 71 %fr23R)
> > > 	(expr_list:REG_DEAD (reg:DI 74 %fr25)
> > > 	    (nil))))
> > > ../../gcc/gcc/bb-reorder.c:219: internal compiler error: in num_delay_slots, at insn-attrtab.c:4085
> > 
> > I have determined that it is the addition of this patch that results in
> > the above ICE:
> > 
> > 2003-02-10  Josef Zlomek  <zlomekj@suse.cz>
> > 
> > 	* Makefile.in (bb-reorder.o): Add dependency on $(FIBHEAP_H).
> > 	* bb-reorder.c (make_reorder_chain): Deleted.
> > 	(make_reorder_chain_1): Deleted.
> > 	(find_traces): New function.
> > 	(rotate_loop): New function.
> > 	(mark_bb_visited): New function.
> > 	(find_traces_1_round): New function.
> > 	(copy_bb): New function.
> > 	(bb_to_key): New function.
> > 	(better_edge_p): New function.
> > 	(connect_traces): New function.
> > 	(copy_bb_p): New function.
> > 	(get_uncond_jump_length): New function.
> > 	(reorder_basic_blocks): Use new functions (Software Trace Cache).
> > 	* cfgcleanup.c (outgoing_edges_match): Enable crossjumping across loop
> > 	boundaries.
> 
> I apologize for the breakage. It seems that new bb-reorder has uncovered
> bugs in machine descriptions.
> Honza Hubicka has checked in a patch
> (http://gcc.gnu.org/ml/gcc-patches/2003-02/msg00847.html)
> which hopefully should enable gcc to bootstrap again.

I have been looking at the patterns which use the xmpyu insn on the PA.
There are two patterns (32 and 64 bit) which have an uint32_operand
predicate and "f" constraint.  The "f" constraint is inconsistent with
the predicate.  The uint32_operand predicate is inconsistent with the
actual capability of the machine instruction.  I had queried Jeff Law
about this in the past.  This was his response:

   > I thought changing the operands of the pattern to register_operand is a more
   > accurate description of the machine insn although reloads still can
   > potentially occur.
     It's certainly more accurate, but due to secondary effects of register
     allocation
     and reloading it's actually more profitable to be more general in the
     operand predicates than what the instruction actually allows.  That is
     generally a bad thing to do, but from time to time it is helpful.

Basically, some games are being played with the predicate and constraint
to improve the generated code.

The 32-bit seems to be building again.  However, the have been some
"strange" warning messages on hppa64-hp-hpux11.11:

g-yacc.29398.c: In function `yystrlen':
g-yacc.29398.c:708: warning: traditional C rejects ISO C style function definiti
ons
g-yacc.29398.c: In function `yystpcpy':
g-yacc.29398.c:733: warning: traditional C rejects ISO C style function definiti
ons
g-yacc.29398.c: In function `yydestruct':
g-yacc.29398.c:800: warning: traditional C rejects ISO C style function definiti
ons
g-yacc.29398.c: In function `yyparse':
g-yacc.29398.c:863: warning: traditional C rejects ISO C style function definiti
ons

and

c-p29635.c: In function `yy_stack_print':
c-p29635.c:2150: warning: traditional C rejects ISO C style function definitions
c-p29635.c: In function `yy_reduce_print':
c-p29635.c:2176: warning: traditional C rejects ISO C style function definitions
c-p29635.c: In function `yysymprint':
c-p29635.c:2297: warning: traditional C rejects ISO C style function definitions
c-p29635.c: In function `yydestruct':
c-p29635.c:2333: warning: traditional C rejects ISO C style function definitions
c-p29635.c: In function `yyparse':
c-p29635.c:2396: warning: traditional C rejects ISO C style function definitions

Possibly, this is a bison 1.875 problem.  Yes, it seems to be.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Bootstrap failure on hppa-unknown-linux-gnu, trunk

[Josef Zlomek]

> > stage1/xgcc -Bstage1/ -B/home/dave/opt/gnu/hppa-linux/bin/ -c   -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long -fno-common -Werror   -DHAVE_CONFIG_H    -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include
> > ../../gcc/gcc/bb-reorder.c -o bb-reorder.o
> > ../../gcc/gcc/bb-reorder.c: In function `find_traces':
> > ../../gcc/gcc/bb-reorder.c:219: error: unrecognizable insn:
> > (insn 776 775 777 0x40568f60 (set (reg:DI 70 %fr23 [252])
> > 	(mult:DI (zero_extend:DI (reg:SI 69 %fr22R [246]))
> > 	    (reg:DI 74 %fr25))) -1 (nil)
> >    (expr_list:REG_UNUSED (reg:SI 71 %fr23R)
> > 	(expr_list:REG_DEAD (reg:DI 74 %fr25)
> > 	    (nil))))
> > ../../gcc/gcc/bb-reorder.c:219: internal compiler error: in num_delay_slots, at insn-attrtab.c:4085
> 
> I have determined that it is the addition of this patch that results in
> the above ICE:

Maybe it is a similar problem in machine descriptions as alpha and sh did
have (http://gcc.gnu.org/ml/gcc-patches/2003-02/msg01295.html). But maybe I'm wrong.
The bb-reorder itself is pretty high level, it is a probably first use
of code duplication functions which went to mainline.
Anyway, I apologize for the breakage.

Josef

> 2003-02-10  Josef Zlomek  <zlomekj@suse.cz>
> 
> 	* Makefile.in (bb-reorder.o): Add dependency on $(FIBHEAP_H).
> 	* bb-reorder.c (make_reorder_chain): Deleted.
> 	(make_reorder_chain_1): Deleted.
> 	(find_traces): New function.
> 	(rotate_loop): New function.
> 	(mark_bb_visited): New function.
> 	(find_traces_1_round): New function.
> 	(copy_bb): New function.
> 	(bb_to_key): New function.
> 	(better_edge_p): New function.
> 	(connect_traces): New function.
> 	(copy_bb_p): New function.
> 	(get_uncond_jump_length): New function.
> 	(reorder_basic_blocks): Use new functions (Software Trace Cache).
> 	* cfgcleanup.c (outgoing_edges_match): Enable crossjumping across loop
> 	boundaries.

Re: Bootstrap failure on hppa-unknown-linux-gnu, trunk

[Josef Zlomek]

> > > stage1/xgcc -Bstage1/ -B/home/dave/opt/gnu/hppa-linux/bin/ -c   -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long -fno-common -Werror   -DHAVE_CONFIG_H    -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include
> > > ../../gcc/gcc/bb-reorder.c -o bb-reorder.o
> > > ../../gcc/gcc/bb-reorder.c: In function `find_traces':
> > > ../../gcc/gcc/bb-reorder.c:219: error: unrecognizable insn:
> > > (insn 776 775 777 0x40568f60 (set (reg:DI 70 %fr23 [252])
> > > 	(mult:DI (zero_extend:DI (reg:SI 69 %fr22R [246]))
> > > 	    (reg:DI 74 %fr25))) -1 (nil)
> > >    (expr_list:REG_UNUSED (reg:SI 71 %fr23R)
> > > 	(expr_list:REG_DEAD (reg:DI 74 %fr25)
> > > 	    (nil))))
> > > ../../gcc/gcc/bb-reorder.c:219: internal compiler error: in num_delay_slots, at insn-attrtab.c:4085
> > 
> > I have determined that it is the addition of this patch that results in
> > the above ICE:
> 
> Maybe it is a similar problem in machine descriptions as alpha and sh did
> have (http://gcc.gnu.org/ml/gcc-patches/2003-02/msg01295.html). But maybe I'm wrong.
> The bb-reorder itself is pretty high level, it is a probably first use
> of code duplication functions which went to mainline.
> Anyway, I apologize for the breakage.

Or there simply is some code in bb-reorder.c which uncovers another bug.

Josef

Re: jcf-io.c:339: warning: `origsep' might be used uninitialized

[John David Anglin]

> Yet another bootstrap error on hppa64-hp-hpux11.11:
> 
> stage1/xgcc -Bstage1/ -B/opt/gnu64/hppa64-hp-hpux11.11/bin/ -c   -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes  -fno-common -Werror   -DHAVE_CONFIG_H    -I. -Ijava -I../../gcc/gcc -I../../gcc/gcc/java -I../../gcc/gcc/config -I../../gcc/gcc/../include -I../../gcc/gcc/../zlib \
>    ../../gcc/gcc/java/jcf-io.c -o java/jcf-io.o
> ../../gcc/gcc/java/jcf-io.c: In function `caching_stat':
>  ../../gcc/gcc/java/jcf-io.c:339: warning: `origsep' might be used uninitialized in this function

Was the patch that caused this failure tested and approved?

<http://gcc.gnu.org/ml/gcc-cvs/2003-03/msg00510.html>

I don't see any mention of it on gcc-patches.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [PATCH]: PA long unconditional branch generation (PR10062)

[John David Anglin]

> Without inlining, the length of the compare chain is 29.  The default
> inlining requires in excess of 768MB of virtual memory to compile
> the testcase in the PR.  Clearly, the default inlining parameters
> need to be tweaked to keep the compilation with reasonable bounds
> but I'm not sure how to do this.  Possibly, the throttling algorithm
> is broken.  It would also be nice to use a jump table.

I should note that once the size of a function exceeds ~240KB we need
to use long calls and branches.  These sequences are substantially
longer and less efficient.  So, we probably lose more than we gain
at that point.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Failure of test07 in 27_io/filebuf_members.cc under HP-UX (PR 9964)

[John David Anglin]

> I have examined the failure of 27_io/filebuf_members.cc on
> hppa2.0w-hp-hpux11.11.  The test fails because the following code
> from config/io/basic_file_stdio.cc doesn't close the file after a
> character is written to a broken pipe:

The enclosed patch against the 3.3 branch fixes the failure of
27_io/filebuf_members.cc on hppa2.0w-hp-hpux11.11.

Ok for 3.3 and main?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2003-04-10  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* basic_file_stdio.cc (__basic_file<char>::close): Don't flush stream
	twice.  Always set _M_cfile to 0 when stream was open.

Index: config/io/basic_file_stdio.cc
===================================================================
RCS file: /cvs/gcc/gcc/libstdc++-v3/config/io/basic_file_stdio.cc,v
retrieving revision 1.6.2.2
diff -u -3 -p -r1.6.2.2 basic_file_stdio.cc
--- config/io/basic_file_stdio.cc	5 Feb 2003 19:20:07 -0000	1.6.2.2
+++ config/io/basic_file_stdio.cc	10 Apr 2003 19:39:25 -0000
@@ -181,12 +181,12 @@ namespace std 
     __basic_file* __retval = static_cast<__basic_file*>(NULL);
     if (this->is_open())
       {
-	fflush(_M_cfile);
-	if ((_M_cfile_created && fclose(_M_cfile) == 0) || !_M_cfile_created)
-	  {
-	    _M_cfile = 0;
-	    __retval = this;
-	  }
+	if (_M_cfile_created)
+	  fclose(_M_cfile);
+	else
+	  fflush(_M_cfile);
+	_M_cfile = 0;
+	__retval = this;
       }
     return __retval;
   }

Re: Failure of test07 in 27_io/filebuf_members.cc under HP-UX (PR 9964)

[Benjamin Kosnik]

>Ok for 3.3 and main?

Yes. I tested this for you on x86/linux and it looks good. Please check it in.

best,
benjamin

>2003-04-10  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
>
>	* basic_file_stdio.cc (__basic_file<char>::close): Don't flush stream
>	twice.  Always set _M_cfile to 0 when stream was open.

Re: PATCH: Fix PR 8866

[John David Anglin]

> Hi Mark,
> 
> The following patch introduces a testsuite regression on the 3.3 branch
> for hppa64-hp-hpux11.11:
> 
> 2003-04-16  Mark Mitchell  <mark at codesourcery dot com>
> 
>         PR middle-end/8866
> 	* cfgtrl.c (try_redirect_by_replacing_jump): Do not delete
> 	jumptables.
> 
> There are three new fails of gcc.c-torture/execute/20011219-1.c.
> See <http://gcc.gnu.org/ml/gcc-testresults/2003-04/msg01086.html>.
> The compiler appears to go into an infinite loop compiling this
> file at -O2 and above.

As well, the following bootstrap failure on the 3.3 branch occurred on
hppa-unknown-linux-gnu:

stage1/xgcc -Bstage1/ -B/home/dave/opt/gnu/gcc/gcc-3.3-sjlj/hppa-linux/bin/   -g -O2 -DIN_GCC   -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long   -DHAVE_CONFIG_H -DGENERATOR_FILE  -o genrecog \
 genrecog.o rtl.o read-rtl.o bitmap.o ggc-none.o gensupport.o insn-conditions.o print-rtl1.o \
    errors.o ../libiberty/libiberty.a
./genrecog ../../gcc/gcc/config/pa/pa.md > tmp-recog.c
make[2]: *** [s-recog] Error 137

I had to kill genrecog as it was hung in a loop.  I haven't specifically
identified your patch as causing the genrecog problem but it was installed
in the period between the last successful bootstrap and the above failure.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] allow zero_extract combines - checked in

[John David Anglin]

> After combine, we have
> 
> (insn 6 5 7 0 0000000000000000 (set (reg:SI 69)
> 	(mem/s:SI (plus:DI (reg/f:DI 29 %r29)
> 		(const_int -64 [0xffffffffffffffc0])) [0+0 S4 A32])) 70 {*pa.md:2251} (nil)
>     (nil))
> 
> (note 7 6 8 0 NOTE_INSN_DELETED)
> 
> (insn 8 7 9 0 0000000000000000 (set (mem/s:SI (plus:DI (reg/f:DI 29 %r29)
> 		(const_int -64 [0xffffffffffffffc0])) [0+0 S4 A32])
> 	(subreg:SI (reg:DI 68 [ u ]) 4)) 70 {*pa.md:2251} (insn_list 5 (nil))
>     (expr_list:REG_DEAD (reg:DI 68 [ u ])
> 	(expr_list:REG_DEAD (reg/f:DI 29 %r29)
> 	    (nil))))
> 
> There isn't a REG_DEAD note for reg:SI 69 any longer.  This causes
> find_free_reg to fail because dead_index for this QTYNO is -1:

Actually, it seems insn 6 should have been deleted as there is no
other use of reg:SI 69.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] allow zero_extract combines - checked in

[Eric Christopher]

> > 
> > There isn't a REG_DEAD note for reg:SI 69 any longer.  This causes
> > find_free_reg to fail because dead_index for this QTYNO is -1:
> 
> Actually, it seems insn 6 should have been deleted as there is no
> other use of reg:SI 69.

Odd. I love exposing bugs in other places. It means I only have to look
at the entire rest of the compiler ;)

Thanks for the help.

Hey, btw, do you have an updated config.guess for hppa64-hp-hpux11.00? I
have to explicitly set it.

-eric

-- 
Eric Christopher <echristo@redhat.com>

checking host system type... /es/scratch/echristo/gcc/config.guess: unable to guess system type
                                                                                
This script, last modified 2003-01-30, has failed to recognize
the operating system you are using. It is advised that you
download the most up to date version of the config scripts from
                                                                                
    ftp://ftp.gnu.org/pub/gnu/config/
                                                                                
If the version you run (/es/scratch/echristo/gcc/config.guess) is already up to
date, please
send the following data and any information you think might be
pertinent to <config-patches@gnu.org> in order to provide the needed
information to handle your system.
                                                                                
config.guess timestamp = 2003-01-30
                                                                                
uname -m = 9000/800
uname -r = B.11.00
uname -s = -t
uname -v = U
                                                                                
/usr/bin/uname -p =
/bin/uname -X     =
                                                                                
hostinfo               =
/bin/universe          =
/usr/bin/arch -k       =
/bin/arch              =
/usr/bin/oslevel       =
/usr/convex/getsysinfo =

Re: [PATCH] allow zero_extract combines - checked in

[John David Anglin]

> Odd. I love exposing bugs in other places. It means I only have to look
> at the entire rest of the compiler ;)

Well it's probably not as bad as that :)

> Hey, btw, do you have an updated config.guess for hppa64-hp-hpux11.00? I
> have to explicitly set it.

No, the current version supports hppa64-hp-hpux11.00.  The situation
is somewhat different from other ports in that the 32 and 64-bit ports
are completely separate ports.  This is pretty much the situation with
HP's tools as well, although HP provides wrappers around them.

The way to get this to work is to define PATH so that configure finds
a 64-bit version of gcc, or you can define CC so that it selects
a 64-bit compiler (e.g., CC="cc -Ae +DA2.0W").  Then, config.guess will
automatically select hppa64-hp-hpux11.00 rather than hppa2.0w-hp-hpux11.00.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] allow zero_extract combines - checked in

[Eric Christopher]

On Sun, 2003-05-11 at 19:43, John David Anglin wrote:
> > Odd. I love exposing bugs in other places. It means I only have to look
> > at the entire rest of the compiler ;)
> 
> Well it's probably not as bad as that :)

Well.. yeah. :)

> No, the current version supports hppa64-hp-hpux11.00.  The situation
> is somewhat different from other ports in that the 32 and 64-bit ports
> are completely separate ports.  This is pretty much the situation with
> HP's tools as well, although HP provides wrappers around them.
> 
> The way to get this to work is to define PATH so that configure finds
> a 64-bit version of gcc, or you can define CC so that it selects
> a 64-bit compiler (e.g., CC="cc -Ae +DA2.0W").  Then, config.guess will
> automatically select hppa64-hp-hpux11.00 rather than hppa2.0w-hp-hpux11.00.

Ah ha. This will help a lot. Might help with my current build problem on
hpux (native cpp bitching about c-opts.c). *sigh*

-eric

-- 
Eric Christopher <echristo@redhat.com>

Re: [PATCH] allow zero_extract combines - checked in

[Eric Christopher]

> Actually, it seems insn 6 should have been deleted as there is no
> other use of reg:SI 69.

Apparently this isn't reproducing now, but a full bootstrap is not
reproducible due to fallout from Jan's patch.

-eric

-- 
Eric Christopher <echristo@redhat.com>

Re: [PATCH] allow zero_extract combines - checked in

[John David Anglin]

> > Actually, it seems insn 6 should have been deleted as there is no
> > other use of reg:SI 69.
> 
> Apparently this isn't reproducing now, but a full bootstrap is not
> reproducible due to fallout from Jan's patch.

Did you compile with "-O1"?  That's the only optimization level where
the problem occurs.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] allow zero_extract combines - checked in

[Eric Christopher]

On Mon, 2003-05-12 at 10:05, John David Anglin wrote:
> > > Actually, it seems insn 6 should have been deleted as there is no
> > > other use of reg:SI 69.
> > 
> > Apparently this isn't reproducing now, but a full bootstrap is not
> > reproducible due to fallout from Jan's patch.
> 
> Did you compile with "-O1"?  That's the only optimization level where
> the problem occurs.

Actually, it was your comment that I was basing this on - perhaps I
misunderstood you. :)

I'll just wait for your patch and then try again.

-eric

-- 
Eric Christopher <echristo@redhat.com>

Re: [PATCH] allow zero_extract combines - checked in

[John David Anglin]

> On Mon, 2003-05-12 at 10:05, John David Anglin wrote:
> > > > Actually, it seems insn 6 should have been deleted as there is no
> > > > other use of reg:SI 69.
> > > 
> > > Apparently this isn't reproducing now, but a full bootstrap is not
> > > reproducible due to fallout from Jan's patch.
> > 
> > Did you compile with "-O1"?  That's the only optimization level where
> > the problem occurs.
> 
> Actually, it was your comment that I was basing this on - perhaps I
> misunderstood you. :)
> 
> I'll just wait for your patch and then try again.

I have installed a patch to fix the bootstrap failure resulting from
Jan's patch.  I now see the following assembler warning:

stage1/xgcc -Bstage1/ -B/opt/gnu64/hppa64-hp-hpux11.00/bin/ -c   -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic -Wno-long-long -Werror -fno-common   -DHAVE_CONFIG_H    -I. -I. -I../../gcc/gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include \
	   ../../gcc/gcc/c-opts.c -o c-opts.o 
/var/tmp//ccAEh2VX.s: Assembler messages:
/var/tmp//ccAEh2VX.s:592: Warning: .space repeat count is zero, ignored
/var/tmp//ccAEh2VX.s:598: Warning: .space repeat count is zero, ignored
...

I believe that this has been reported on other ports as well.

I misunderstood your comment.  The "-O1" optimization comment was with
respect to the testsuite failure and not the current bootstrap problems.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] allow zero_extract combines - checked in

[Eric Christopher]

> I believe that this has been reported on other ports as well.
> 

Yup :)

> I misunderstood your comment.  The "-O1" optimization comment was with
> respect to the testsuite failure and not the current bootstrap problems.

Aaah. I was reading your mail wrong. *sigh* Thanks.

-eric

-- 
Eric Christopher <echristo@redhat.com>

Re: speedup collect2 (by not using it)

[John David Anglin]

> I think you need to add:
> 
> !         else
> !           s = find_a_file (&exec_prefixes, "ld", X_OK, 0);

No, gcc is running the correct linker:

# stage1/xgcc -Bstage1/ -B/opt/gnu64/hppa64-hp-hpux11.11/bin/   -g -O2 -DIN_GCC -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic -Wno-long-long -Werror -fno-common   -DHAVE_CONFIG_H -DGENERATOR_FILE  -o gengtype.x gengtype.o gengtype-lex.o gengtype-yacc.o ../libiberty/libiberty.a -v
Reading specs from stage1/specs
Configured with: ../gcc/configure --with-gnu-as --with-as=/opt/gnu64/bin/as --with-ld=/usr/ccs/bin/ld --enable-shared --disable-nls --with-local-prefix=/opt/gnu64 --prefix=/opt/gnu64 --host=hppa64-hp-hpux11.11 : (reconfigured) ../gcc/configure --with-gnu-as --with-as=/opt/gnu64/bin/as --with-ld=/usr/ccs/bin/ld --enable-shared --disable-nls --with-local-prefix=/opt/gnu64 --prefix=/opt/gnu64 --host=hppa64-hp-hpux11.11
Thread model: single
gcc version 3.4 20030523 (experimental)
/usr/ccs/bin/ld +Accept TypeMismatch -E -u main -o gengtype.x /usr/ccs/lib/pa20_64/crt0.o stage1/crtbegin.o -Lstage1 -L/opt/gnu64/hppa64-hp-hpux11.11/bin -L/opt/gnu64/lib/gcc-lib/hppa64-hp-hpux11.11/../../../hppa64-hp-hpux11.11/lib -L/usr/ccs/bin -L/usr/ccs/lib/pa20_64 -L/opt/langtools/lib/pa20_64 -L/opt/gnu64/lib/gcc-lib/hppa64-hp-hpux11.11/../.. gengtype.o gengtype-lex.o gengtype-yacc.o ../libiberty/libiberty.a -lgcc -lc /usr/lib/pa20_64/milli.a -lgcc stage1/crtend.o

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] Fix PCH failures on SPARC

[John David Anglin]

> I believe that the patch needs to strip the encoding from the function
> string.  That's where the `*' comes from.

The following patch fixes the problem.  I will install after a full
bootstrap and check completes.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2003-06-19  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* som.h (ASM_OUTPUT_SOURCE_LINE): Use targetm.strip_name_encoding to
	strip name encoding.

Index: config/pa/som.h
===================================================================
RCS file: /cvs/gcc/gcc/gcc/config/pa/som.h,v
retrieving revision 1.42
diff -u -3 -p -r1.42 som.h
--- config/pa/som.h	17 Jun 2003 08:06:57 -0000	1.42
+++ config/pa/som.h	19 Jun 2003 21:40:16 -0000
@@ -30,16 +30,20 @@ Boston, MA 02111-1307, USA.  */
 /* We make the first line stab special to avoid adding several
    gross hacks to GAS.  */
 #undef  ASM_OUTPUT_SOURCE_LINE
-#define ASM_OUTPUT_SOURCE_LINE(file, line, counter)	\
-  { static tree last_function_decl = NULL;		\
-    if (current_function_decl == last_function_decl)	\
-      fprintf (file, "\t.stabn 68,0,%d,L$M%d-%s\nL$M%d:\n",	\
-	       line, counter,			\
-	       XSTR (XEXP (DECL_RTL (current_function_decl), 0), 0) + 1, \
-	       counter);				\
-    else						\
-      fprintf (file, "\t.stabn 68,0,%d,0\n", line);	\
-    last_function_decl = current_function_decl;		\
+#define ASM_OUTPUT_SOURCE_LINE(file, line, counter)		\
+  { static tree last_function_decl = NULL;			\
+    if (current_function_decl == last_function_decl)		\
+      {								\
+	rtx func = DECL_RTL (current_function_decl);		\
+	const char *name = XSTR (XEXP (func, 0), 0);		\
+	fprintf (file, "\t.stabn 68,0,%d,L$M%d-%s\nL$M%d:\n",	\
+		 line, counter,					\
+		 (* targetm.strip_name_encoding) (name),	\
+		 counter);					\
+      }								\
+    else							\
+      fprintf (file, "\t.stabn 68,0,%d,0\n", line);		\
+    last_function_decl = current_function_decl;			\
   }
 
 /* gdb needs a null N_SO at the end of each file for scattered loading.  */

Re: Hookize CFG debugging code

[John David Anglin]

> Yes, the warnings are no longer generated by the test.  I'll let you know
> the result of the bootstrap and check when it completes.

stage1/xgcc -Bstage1/ -B/opt/gnu/hppa2.0w-hp-hpux11.00/bin/ -c   -O2 -g -fPIC -D
IN_GCC   -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -peda
ntic -Wno-long-long -Werror -fno-common   -DHAVE_CONFIG_H    -I. -I. -I../../gcc
/gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include ../../g
cc/gcc/cfgrtl.c -o cfgrtl.o
../../gcc/gcc/cfgrtl.c: In function `rtl_verify_flow_info_1':
../../gcc/gcc/cfgrtl.c:1768: warning: `fallthru' might be used uninitialized in 
this function

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Hookize CFG debugging code

[Jan Hubicka]

> > Yes, the warnings are no longer generated by the test.  I'll let you know
> > the result of the bootstrap and check when it completes.
> 
> stage1/xgcc -Bstage1/ -B/opt/gnu/hppa2.0w-hp-hpux11.00/bin/ -c   -O2 -g -fPIC -D
> IN_GCC   -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -peda
> ntic -Wno-long-long -Werror -fno-common   -DHAVE_CONFIG_H    -I. -I. -I../../gcc
> /gcc -I../../gcc/gcc/. -I../../gcc/gcc/config -I../../gcc/gcc/../include ../../g
> cc/gcc/cfgrtl.c -o cfgrtl.o
> ../../gcc/gcc/cfgrtl.c: In function `rtl_verify_flow_info_1':
> ../../gcc/gcc/cfgrtl.c:1768: warning: `fallthru' might be used uninitialized in 
> this function
Urgh.  Please just add the zero initializer (when it is used it is
initialized so the warning is harmless).  Sorry for that.

Honza
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

[PATCH]: Fix label replacement in REG_NOTES

[John David Anglin]

This patches fixes the bootstrap failure reported in this message:

<http://gcc.gnu.org/ml/gcc-patches/2003-05/msg01841.html>.

The bootstrap failure occurs because of the presence of the following
instruction in a loop:

(jump_insn 66 65 70 4 0x40978750 (set (pc)
        (if_then_else (ne (reg:SI 105)
		(reg:SI 131))
	    (label_ref 80)
	    (pc))) 25 {*pa.md:1674} (nil)
    (expr_list:REG_EQUAL (if_then_else (ne (reg:SI 105)
		(const_int 112 [0x70]))
	    (label_ref 80)
	    (pc))
    (nil)))

The target of this conditional branch gets redirected to a new code_label.
However, the presence of a REG_EQUAL note causes the LABEL_NUSES count to
be incremented once too may times for the new label and decremented once
too many times for the old label.  This occurs in load_mems.

The enclosed patch fixes this by not updating LABEL_NUSES for label
references in REG_NOTES.  The semantics of label references is that
they don't contribute to the usage count.  This allows register notes
to be removed without having to worry about updating the the usage
counts.

Tested on hppa-unknown-linux-gnu and hppa2.0w-hp-hpux11.11 with no
regressions.

Ok for main?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2003-06-20  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* cfgcleanup.c (outgoing_edges_match, try_crossjump_to_edge): Use
	replace_labels.
	* loop.c (load_mems): Likewise.
	* rtl.h (replace_label): Delete declaration.
	(replace_labels): Add declaration.
	* rtlanal.c (replace_label): Make static.
	(replace_labels): New function.

Index: cfgcleanup.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/cfgcleanup.c,v
retrieving revision 1.84
diff -u -3 -p -r1.84 cfgcleanup.c
--- cfgcleanup.c	6 Jun 2003 09:24:23 -0000	1.84
+++ cfgcleanup.c	20 Jun 2003 13:48:55 -0000
@@ -1310,7 +1310,7 @@ outgoing_edges_match (mode, bb1, bb2)
 		  rr.r1 = label1;
 		  rr.r2 = label2;
 		  rr.update_label_nuses = false;
-		  for_each_rtx (&bb1->end, replace_label, &rr);
+		  replace_labels (bb1->end, &rr);
 
 		  match = insns_match_p (mode, bb1->end, bb2->end);
 		  if (rtl_dump_file && match)
@@ -1323,7 +1323,7 @@ outgoing_edges_match (mode, bb1, bb2)
 		     from the instruction is deleted too.  */
 		  rr.r1 = label2;
 		  rr.r2 = label1;
-		  for_each_rtx (&bb1->end, replace_label, &rr);
+		  replace_labels (bb1->end, &rr);
 
 		  return match;
 		}
@@ -1474,7 +1474,7 @@ try_crossjump_to_edge (mode, e1, e2)
 		 a block whose end is a tablejump, the tablejump referenced
 		 from the instruction is deleted too.  */
 	      if (insn != src1->end)
-		for_each_rtx (&insn, replace_label, &rr);
+		replace_labels (insn, &rr);
 	    }
 	}
     }
Index: loop.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/loop.c,v
retrieving revision 1.459
diff -u -3 -p -r1.459 loop.c
--- loop.c	16 Jun 2003 21:41:05 -0000	1.459
+++ loop.c	20 Jun 2003 13:49:57 -0000
@@ -10194,7 +10194,7 @@ load_mems (loop)
 
       for (p = loop->start; p != loop->end; p = NEXT_INSN (p))
 	{
-	  for_each_rtx (&p, replace_label, &rr);
+	  replace_labels (p, &rr);
 	}
     }
 
Index: rtl.h
===================================================================
RCS file: /cvs/gcc/gcc/gcc/rtl.h,v
retrieving revision 1.418
diff -u -3 -p -r1.418 rtl.h
--- rtl.h	19 Jun 2003 12:25:35 -0000	1.418
+++ rtl.h	20 Jun 2003 13:50:07 -0000
@@ -1721,7 +1721,7 @@ extern int inequality_comparisons_p	PARA
 extern rtx replace_rtx			PARAMS ((rtx, rtx, rtx));
 extern rtx replace_regs			PARAMS ((rtx, rtx *, unsigned int,
 						 int));
-extern int replace_label		PARAMS ((rtx *, void *));
+extern void replace_labels		PARAMS ((rtx, replace_label_data *));
 extern int rtx_referenced_p		PARAMS ((rtx, rtx));
 extern bool tablejump_p			PARAMS ((rtx, rtx *, rtx *));
 extern int computed_jump_p		PARAMS ((rtx));
Index: rtlanal.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/rtlanal.c,v
retrieving revision 1.158
diff -u -3 -p -r1.158 rtlanal.c
--- rtlanal.c	13 Jun 2003 05:30:33 -0000	1.158
+++ rtlanal.c	20 Jun 2003 13:50:12 -0000
@@ -38,6 +38,7 @@ Software Foundation, 59 Temple Place - S
 static int global_reg_mentioned_p_1 PARAMS ((rtx *, void *));
 static void set_of_1		PARAMS ((rtx, rtx, void *));
 static void insn_dependent_p_1	PARAMS ((rtx, rtx, void *));
+static int replace_label	PARAMS ((rtx *, void *));
 static int rtx_referenced_p_1	PARAMS ((rtx *, void *));
 static int computed_jump_p_1	PARAMS ((rtx));
 static void parms_set 		PARAMS ((rtx, rtx, void *));
@@ -2792,10 +2793,38 @@ replace_regs (x, reg_map, nregs, replace
   return x;
 }
 
+/* Replace all occurrences of the old label in INSN with the new one.
+   DATA points to the replacement label data for the old and new labels.  */
+
+void
+replace_labels (insn, data)
+     rtx insn;
+     replace_label_data *data;
+{
+  /* Labels in REG_NOTES are not recorded in LABEL_NUSES.  */
+  if (data->update_label_nuses && INSN_P (insn))
+    {
+      rtx note = REG_NOTES (insn);
+
+      if (note)
+	{
+	  REG_NOTES (insn) = NULL_RTX;
+	  data->update_label_nuses = false;
+	  for_each_rtx (&note, replace_label, data);
+	  data->update_label_nuses = true;
+	  for_each_rtx (&insn, replace_label, data);
+	  REG_NOTES (insn) = note;
+	  return;
+	}
+    }
+
+  for_each_rtx (&insn, replace_label, data);
+}
+
 /* Replace occurrences of the old label in *X with the new one.
    DATA is a REPLACE_LABEL_DATA containing the old and new labels.  */
 
-int
+static int
 replace_label (x, data)
      rtx *x;
      void *data;

Re: Bootstrap failure compiling ada/misc.c

[John David Anglin]

> Neil has committed a patch that makes gnat_argv const.  I don't
> think this will work, because it produced warnings during the
> first stage of the bootstrap
> 
>  gcc -c   -g  -DIN_GCC   -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes     -fno-common   -DHAVE_CONFIG_H    -I. -Iada -I../../gcc/gcc -I../../gcc/gcc/ada -I../../gcc/gcc/config -I../../gcc/gcc/../include ../../gcc/gcc/ada/misc.c -o ada/misc.o
> ../../gcc/gcc/ada/misc.c: In function `gnat_handle_option':
> ../../gcc/gcc/ada/misc.c:262: warning: assignment of read-only location
> ../../gcc/gcc/ada/misc.c:263: warning: passing arg 1 of `strcpy' discards qualifiers from pointer target type
> ../../gcc/gcc/ada/misc.c: In function `gnat_init_options':
> ../../gcc/gcc/ada/misc.c:288: warning: assignment from incompatible pointer type
> 
> but I didn't let the bootstrap proceed far enough to be sure.

It causes a failure.

> Matt Kraai          kraai@alumni.cmu.edu          Debian GNU/Linux
> 
>	* misc.c (gnat_handle_option, gnat_init_options): Copy
> 	arguments.

Can't approve but this worked for me.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [Boehm-GC] Limit +ESdbgasm to HPUX cc on PA

[John David Anglin]

> What goes wrong building libgcj on hpux?  Nobody has ever tried it, as
> far as I know, but it might not be too hard to make it work,
> especially if the GC is working.

I haven't tried hpux but Randolph Chung has a preliminary implementation
of libffi for hppa-linux.  Once this is working, it shouldn't be hard
to extend this to hpux.  With the libffi implementation, libgcj built
without any problems.  There were quite a few failures in the java
testsuite.  These might be related to the libffi implementation.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [Boehm-GC] Limit +ESdbgasm to HPUX cc on PA

[Tom Tromey]

>>>>> "John" == John David Anglin <dave@hiauly1.hia.nrc.ca> writes:

>> What goes wrong building libgcj on hpux?  Nobody has ever tried it, as
>> far as I know, but it might not be too hard to make it work,
>> especially if the GC is working.

John> I haven't tried hpux but Randolph Chung has a preliminary
John> implementation of libffi for hppa-linux.  Once this is working,
John> it shouldn't be hard to extend this to hpux.  With the libffi
John> implementation, libgcj built without any problems.  There were
John> quite a few failures in the java testsuite.  These might be
John> related to the libffi implementation.

Quite possible.  Did he implement the closure API?  That is needed for
the interpreter to work.  The other ("normal") API is needed for
reflection.

We should probably set up the test suite to xfail tests when we know
the interpreter won't work.

Tom

Re: [Boehm-GC] Limit +ESdbgasm to HPUX cc on PA

[John David Anglin]

> Quite possible.  Did he implement the closure API?  That is needed for

Yes, it looks like he implemented the closure API.  At my last test,
the were some issues with small structs.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Unreviewed fix for bootstrap failure

[John David Anglin]

> If you have an indirect jump, you must ensure that all the labels that
> might be used as targets don't get accidentally deleted.  LABEL_REFs in

If you want to see how this currently works, look at the rtl generated
for the small program included in this message:

http://gcc.gnu.org/ml/gcc/2003-07/msg00241.html

The label usage counts for label1 and label2 don't include references
that occur in REG_NOTES.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] Bootstrap failure due to reload bug

[Ulrich Weigand]

I wrote:

> 	* reload.c (find_reloads_subreg_address): Use correct offset for
> 	paradoxical MEM subregs on big-endian targets.

I've now committed the following variant of the patch,
approved in private mail by Mark Mitchell:


Index: gcc/reload.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/reload.c,v
retrieving revision 1.220
diff -c -p -r1.220 reload.c
*** gcc/reload.c	19 Jul 2003 14:47:13 -0000	1.220
--- gcc/reload.c	6 Oct 2003 13:56:47 -0000
*************** find_reloads_subreg_address (rtx x, int 
*** 5806,5814 ****
  	  if (force_replace
  	      || ! rtx_equal_p (tem, reg_equiv_mem[regno]))
  	    {
- 	      int offset = SUBREG_BYTE (x);
  	      unsigned outer_size = GET_MODE_SIZE (GET_MODE (x));
  	      unsigned inner_size = GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)));
  
  	      XEXP (tem, 0) = plus_constant (XEXP (tem, 0), offset);
  	      PUT_MODE (tem, GET_MODE (x));
--- 5806,5821 ----
  	  if (force_replace
  	      || ! rtx_equal_p (tem, reg_equiv_mem[regno]))
  	    {
  	      unsigned outer_size = GET_MODE_SIZE (GET_MODE (x));
  	      unsigned inner_size = GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)));
+ 	      int offset;
+ 
+ 	      /* For big-endian paradoxical subregs, SUBREG_BYTE does not
+ 		 hold the correct (negative) byte offset.  */
+ 	      if (BYTES_BIG_ENDIAN && outer_size > inner_size)
+ 		offset = inner_size - outer_size;
+ 	      else
+ 		offset = SUBREG_BYTE (x);
  
  	      XEXP (tem, 0) = plus_constant (XEXP (tem, 0), offset);
  	      PUT_MODE (tem, GET_MODE (x));


-- 
  Dr. Ulrich Weigand
  weigand@informatik.uni-erlangen.de

Re: [PATCH] Fix AMD64 handling of functions with huge stack frames (take 2)

[John David Anglin]

> The patch is failing on hppa64-hp-hpux11.11 due to some wierd reload errors.
> The symbol_ref that causes the ultimate ICE first appears in the reloads
> for insn 23.
> 
> /xxx/gnu/gcc-3.3/gcc/gcc/testsuite/gcc.c-torture/compile/20031023-1.c:54: error:
>  unrecognizable insn:
> (insn 88 86 89 1 (set (reg:DI %r21)
> 	(mem/u/f:DI (symbol_ref/u:DI ("*L$C0002") [flags 0x2]) [0 S8 A64])) -1 (nil)
>     (nil))

Thinking more, it would appear that LEGITIMIZE_ADDRESS (i.e.,
legitimize_pic_address) isn't getting called for some reason.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] Optimize subregs of zero and sign extensions (take 2)

[John David Anglin]

> 	cmpb,= %r19,%r5,L$0003		; so we end up comparing zero extended
> 					; value of mem with sign extended
> 					; (promoted) value

The compare is a SImode compare, so it does the right thing.  However,
I still suspect that it's this zero extend/sign extend issue that causing
the test to fail.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

[patch] do not disregard LD_LIBRARY_PATH for c++, g77 and objc tests

[John David Anglin]

> > 2004-02-27  Aldy Hernandez  <aldyh@redhat.com>
> > 
> >       * lib/g++.exp (g++_link_flags): Append LD_LIBRARY_PATH to
> >       ld_library_path.

I updated my patch since Aldy's patch has been installed.  Tested
on hppa-unknown-linux-gnu.  Based on lib/libstdc++.exp.

Ok for main?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2004-02-27  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* lib/g++.exp, lib/g77.exp, lib/objc.exp (LD_LIBRARY_PATH, SHLIB_PATH,
	DYLD_LIBRARY_PATH, LD_LIBRARYN32_PATH, LD_LIBRARY64_PATH,
	LD_LIBRARY_PATH_32, LD_LIBRARY_PATH_64): Append original library path
	to new environment library path.

Index: lib/g++.exp
===================================================================
RCS file: /cvs/gcc/gcc/gcc/testsuite/lib/g++.exp,v
retrieving revision 1.37
diff -u -3 -p -r1.37 g++.exp
--- lib/g++.exp	27 Feb 2004 22:05:51 -0000	1.37
+++ lib/g++.exp	28 Feb 2004 02:58:25 -0000
@@ -166,6 +166,25 @@ proc g++_link_flags { paths } {
       }
     }
 
+    # Find the existing LD_LIBRARY_PATH.
+    if [info exists env(LD_LIBRARY_PATH)] {
+	set original_ld_library_path $env(LD_LIBRARY_PATH)
+    # For HP-UX
+    } elseif [info exists env(SHLIB_PATH)] {
+	set original_ld_library_path $env(SHLIB_PATH)
+    # For Darwin:
+    } elseif [info exists env(DYLD_LIBRARY_PATH)] {
+	set original_ld_library_path $env(DYLD_LIBRARY_PATH)
+    # For Solaris 32 bit:
+    } elseif [info exists env(LD_LIBRARY_PATH_32)] {
+	set original_ld_library_path $env(LD_LIBRARY_PATH_32)
+    # For Solaris 64 bit:
+    } elseif [info exists env(LD_LIBRARY_PATH_64)] {
+	set original_ld_library_path $env(LD_LIBRARY_PATH_64)
+    } else {
+	set original_ld_library_path ""
+    }
+
     # On IRIX 6, we have to set variables akin to LD_LIBRARY_PATH, but
     # called LD_LIBRARYN32_PATH (for the N32 ABI) and LD_LIBRARY64_PATH
     # (for the 64-bit ABI).  The right way to do this would be to modify
@@ -176,17 +195,13 @@ proc g++_link_flags { paths } {
     # (SHLIB_PATH).
     # Doing this does cause trouble when testing cross-compilers.
     if {![is_remote target]} {
-	global env;
-	if { $env(LD_LIBRARY_PATH) != "" } {
-		append ld_library_path ":$env(LD_LIBRARY_PATH)";
-	}
-	setenv  LD_LIBRARY_PATH     $ld_library_path
-	setenv  SHLIB_PATH          $ld_library_path
-	setenv  LD_LIBRARYN32_PATH  $ld_library_path
-	setenv  LD_LIBRARY64_PATH   $ld_library_path
-	setenv  LD_LIBRARY_PATH_32  $ld_library_path
-	setenv  LD_LIBRARY_PATH_64  $ld_library_path
-	setenv  DYLD_LIBRARY_PATH   $ld_library_path
+	setenv  LD_LIBRARY_PATH     "$ld_library_path:$original_ld_library_path"
+	setenv  SHLIB_PATH          "$ld_library_path:$original_ld_library_path"
+	setenv  LD_LIBRARYN32_PATH  "$ld_library_path:$original_ld_library_path"
+	setenv  LD_LIBRARY64_PATH   "$ld_library_path:$original_ld_library_path"
+	setenv  LD_LIBRARY_PATH_32  "$ld_library_path:$original_ld_library_path"
+	setenv  LD_LIBRARY_PATH_64  "$ld_library_path:$original_ld_library_path"
+	setenv  DYLD_LIBRARY_PATH   "$ld_library_path:$original_ld_library_path"
     }
 
     return "$flags"
Index: lib/g77.exp
===================================================================
RCS file: /cvs/gcc/gcc/gcc/testsuite/lib/g77.exp,v
retrieving revision 1.18
diff -u -3 -p -r1.18 g77.exp
--- lib/g77.exp	23 Jan 2004 04:42:39 -0000	1.18
+++ lib/g77.exp	28 Feb 2004 02:58:25 -0000
@@ -110,6 +110,25 @@ proc g77_link_flags { paths } {
       }
     }
 
+    # Find the existing LD_LIBRARY_PATH.
+    if [info exists env(LD_LIBRARY_PATH)] {
+	set original_ld_library_path $env(LD_LIBRARY_PATH)
+    # For HP-UX
+    } elseif [info exists env(SHLIB_PATH)] {
+	set original_ld_library_path $env(SHLIB_PATH)
+    # For Darwin:
+    } elseif [info exists env(DYLD_LIBRARY_PATH)] {
+	set original_ld_library_path $env(DYLD_LIBRARY_PATH)
+    # For Solaris 32 bit:
+    } elseif [info exists env(LD_LIBRARY_PATH_32)] {
+	set original_ld_library_path $env(LD_LIBRARY_PATH_32)
+    # For Solaris 64 bit:
+    } elseif [info exists env(LD_LIBRARY_PATH_64)] {
+	set original_ld_library_path $env(LD_LIBRARY_PATH_64)
+    } else {
+	set original_ld_library_path ""
+    }
+
     # On IRIX 6, we have to set variables akin to LD_LIBRARY_PATH, but
     # called LD_LIBRARYN32_PATH (for the N32 ABI) and LD_LIBRARY64_PATH
     # (for the 64-bit ABI).  The right way to do this would be to modify
@@ -118,13 +137,13 @@ proc g77_link_flags { paths } {
     # The same applies to Darwin (DYLD_LIBRARY_PATH), Solaris 32 bit
     # (LD_LIBRARY_PATH_32), Solaris 64 bit (LD_LIBRARY_PATH_64), and HP-UX
     # (SHLIB_PATH).
-    setenv  LD_LIBRARY_PATH     $ld_library_path
-    setenv  SHLIB_PATH          $ld_library_path
-    setenv  LD_LIBRARYN32_PATH  $ld_library_path
-    setenv  LD_LIBRARY64_PATH   $ld_library_path
-    setenv  LD_LIBRARY_PATH_32  $ld_library_path
-    setenv  LD_LIBRARY_PATH_64  $ld_library_path
-    setenv  DYLD_LIBRARY_PATH   $ld_library_path
+    setenv  LD_LIBRARY_PATH     "$ld_library_path:$original_ld_library_path"
+    setenv  SHLIB_PATH          "$ld_library_path:$original_ld_library_path"
+    setenv  LD_LIBRARYN32_PATH  "$ld_library_path:$original_ld_library_path"
+    setenv  LD_LIBRARY64_PATH   "$ld_library_path:$original_ld_library_path"
+    setenv  LD_LIBRARY_PATH_32  "$ld_library_path:$original_ld_library_path"
+    setenv  LD_LIBRARY_PATH_64  "$ld_library_path:$original_ld_library_path"
+    setenv  DYLD_LIBRARY_PATH   "$ld_library_path:$original_ld_library_path"
 
     return "$flags"
 }
Index: lib/objc.exp
===================================================================
RCS file: /cvs/gcc/gcc/gcc/testsuite/lib/objc.exp,v
retrieving revision 1.21
diff -u -3 -p -r1.21 objc.exp
--- lib/objc.exp	23 Jan 2004 04:42:39 -0000	1.21
+++ lib/objc.exp	28 Feb 2004 02:58:25 -0000
@@ -184,6 +184,25 @@ proc objc_target_compile { source dest t
     }
     lappend options "compiler=$OBJC_UNDER_TEST"
 
+    # Find the existing LD_LIBRARY_PATH.
+    if [info exists env(LD_LIBRARY_PATH)] {
+	set original_ld_library_path $env(LD_LIBRARY_PATH)
+    # For HP-UX
+    } elseif [info exists env(SHLIB_PATH)] {
+	set original_ld_library_path $env(SHLIB_PATH)
+    # For Darwin:
+    } elseif [info exists env(DYLD_LIBRARY_PATH)] {
+	set original_ld_library_path $env(DYLD_LIBRARY_PATH)
+    # For Solaris 32 bit:
+    } elseif [info exists env(LD_LIBRARY_PATH_32)] {
+	set original_ld_library_path $env(LD_LIBRARY_PATH_32)
+    # For Solaris 64 bit:
+    } elseif [info exists env(LD_LIBRARY_PATH_64)] {
+	set original_ld_library_path $env(LD_LIBRARY_PATH_64)
+    } else {
+	set original_ld_library_path ""
+    }
+
     # On IRIX 6, we have to set variables akin to LD_LIBRARY_PATH, but
     # called LD_LIBRARYN32_PATH (for the N32 ABI) and LD_LIBRARY64_PATH
     # (for the 64-bit ABI).  The right way to do this would be to modify
@@ -192,13 +211,13 @@ proc objc_target_compile { source dest t
     # The same applies to Darwin (DYLD_LIBRARY_PATH), Solaris 32 bit
     # (LD_LIBRARY_PATH_32), Solaris 64 bit (LD_LIBRARY_PATH_64), and HP-UX
     # (SHLIB_PATH).
-    setenv  LD_LIBRARY_PATH     $ld_library_path
-    setenv  SHLIB_PATH          $ld_library_path
-    setenv  LD_LIBRARYN32_PATH  $ld_library_path
-    setenv  LD_LIBRARY64_PATH   $ld_library_path
-    setenv  LD_LIBRARY_PATH_32  $ld_library_path
-    setenv  LD_LIBRARY_PATH_64  $ld_library_path
-    setenv  DYLD_LIBRARY_PATH   $ld_library_path
+    setenv  LD_LIBRARY_PATH     "$ld_library_path:$original_ld_library_path"
+    setenv  SHLIB_PATH          "$ld_library_path:$original_ld_library_path"
+    setenv  LD_LIBRARYN32_PATH  "$ld_library_path:$original_ld_library_path"
+    setenv  LD_LIBRARY64_PATH   "$ld_library_path:$original_ld_library_path"
+    setenv  LD_LIBRARY_PATH_32  "$ld_library_path:$original_ld_library_path"
+    setenv  LD_LIBRARY_PATH_64  "$ld_library_path:$original_ld_library_path"
+    setenv  DYLD_LIBRARY_PATH   "$ld_library_path:$original_ld_library_path"
 
     return [target_compile $source $dest $type $options]
 }

Re: [patch] do not disregard LD_LIBRARY_PATH for c++, g77 and objc tests

[Geoff Keating]

"John David Anglin" <dave@hiauly1.hia.nrc.ca> writes:

> +    # For Solaris 32 bit:
> +    } elseif [info exists env(LD_LIBRARY_PATH_32)] {
> +	set original_ld_library_path $env(LD_LIBRARY_PATH_32)
> +    # For Solaris 64 bit:
> +    } elseif [info exists env(LD_LIBRARY_PATH_64)] {
> +	set original_ld_library_path $env(LD_LIBRARY_PATH_64)
> +    } else {
> +	set original_ld_library_path ""
> +    }

I'm fairly sure this logic here is not right.  Solaris 32 bit and 64
bit coexist on the same system, don't they?

-- 
- Geoffrey Keating <geoffk@geoffk.org>

Re: [patch] do not disregard LD_LIBRARY_PATH for c++, g77 and objc tests

[Eric Botcazou]

> I'm fairly sure this logic here is not right.  Solaris 32 bit and 64
> bit coexist on the same system, don't they?

Yes, they do.  LD_LIBRARY_PATH_32 will preempt any setting of  
LD_LIBRARY_PATH for 32-bit executables and LD_LIBRARY_PATH_64 will preempt 
any setting of LD_LIBRARY_PATH for 64-bit executables.  So both may be
set.

-- 
Eric Botcazou

Re: [committed 3.5] Tweak xfail for gcc.dg/const-elim-1.c

[John David Anglin]

Mark,

> 2004-04-16  John David Anglin  <dava.anglin@nrc-cnrc.gc.ca>
> 
> 	* const-elim-1.c: xfail hppa-*-*.

This is a small tweak to what Zack installed today.  `hppa' is valid
as a 32-bit cpu config option.

Is this ok for 3.4?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [committed 3.5] Tweak xfail for gcc.dg/const-elim-1.c

[Mark Mitchell]

John David Anglin wrote:

>Mark,
>
>  
>
>>2004-04-16  John David Anglin  <dava.anglin@nrc-cnrc.gc.ca>
>>
>>	* const-elim-1.c: xfail hppa-*-*.
>>    
>>
>
>This is a small tweak to what Zack installed today.  `hppa' is valid
>as a 32-bit cpu config option.
>
>Is this ok for 3.4?
>
Yes, but the ChangeLog entry is incorrect.  It should be 
gcc.dg/const-elim-1.c; you're missing the "gcc.dg/".

Thanks,

-- 
Mark Mitchell
CodeSourcery, LLC
(916) 791-8304
mark@codesourcery.com

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[John David Anglin]

> (gdb) p debug_rtx (reg_known_value[294])
> (plus:DI (reg/f:DI 3 %r3)
>     (const_int 272 [0x110]))
> (gdb) p reg_known_value[294]
> $3 = 0x800003fffe830600

I probably should add the above rtx is created as follows:

(gdb) bt
#0  0x4000000000299c10 in rtx_alloc_stat (.)
    at ../../gcc/gcc/rtl.c:195
#1  0x4000000000299cb0 in copy_rtx ()
    at ../../gcc/gcc/rtl.c:250
#2  0x40000000001a67ac in fixup_var_refs_1 ()
    at ../../gcc/gcc/function.c:1862
#3  0x40000000001a664c in fixup_var_refs_1 ()
    at ../../gcc/gcc/function.c:2459
#4  0x40000000001a7614 in fixup_var_refs_insn ()
    at ../../gcc/gcc/function.c:1766
#5  0x40000000001a7c2c in fixup_var_refs ()
    at ../../gcc/gcc/function.c:1649
#6  0x40000000001a7f24 in schedule_fixup_var_refs ()
    at ../../gcc/gcc/function.c:1500
#7  0x40000000001a8118 in put_reg_into_stack ()
    at ../../gcc/gcc/function.c:1474
#8  0x40000000001a8f90 in put_addressof_into_stack ()
    at ../../gcc/gcc/function.c:2939
#9  0x40000000001a97d4 in purge_addressof_1 ()
    at ../../gcc/gcc/function.c:3001
#10 0x40000000001a99d0 in purge_addressof_1 ()
    at ../../gcc/gcc/function.c:3270
#11 0x40000000001a9a44 in purge_addressof_1 ()
    at ../../gcc/gcc/function.c:2990
#12 0x40000000001aa108 in purge_addressof ()
    at ../../gcc/gcc/function.c:3410
#13 0x4000000000303e5c in rest_of_compilation ()
    at ../../gcc/gcc/passes.c:971
    ...

Just thinking that possibly the rtx isn't being correcly associated with
a hash table so that ggc_mark_roots will mark it.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Mark Mitchell]

John David Anglin wrote:

>>(gdb) p debug_rtx (reg_known_value[294])
>>(plus:DI (reg/f:DI 3 %r3)
>>    (const_int 272 [0x110]))
>>(gdb) p reg_known_value[294]
>>$3 = 0x800003fffe830600
>>    
>>
>
>I probably should add the above rtx is created as follows:
>
>(gdb) bt
>#0  0x4000000000299c10 in rtx_alloc_stat (.)
>    at ../../gcc/gcc/rtl.c:195
>#1  0x4000000000299cb0 in copy_rtx ()
>    at ../../gcc/gcc/rtl.c:250
>#2  0x40000000001a67ac in fixup_var_refs_1 ()
>    at ../../gcc/gcc/function.c:1862
>
RTL generated there should be added into the instruction chain, and 
therefore reachable in other ways.  So, I still think there's not enough 
information here to know for sure that your patch is correct, and not 
merely masking some other symptom.

Thanks,

-- 
Mark Mitchell
CodeSourcery, LLC
(916) 791-8304
mark@codesourcery.com

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[John David Anglin]

> RTL generated there should be added into the instruction chain, and 
> therefore reachable in other ways.  So, I still think there's not enough 
> information here to know for sure that your patch is correct, and not 
> merely masking some other symptom.

This suggests that Zdenek's patch on March 18 results in the instructions
which use this RTX being removed from the instruction chain but for
some reason we are still using reg_known_value[294].  I'll try to look
into this.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[John David Anglin]

> This suggests that Zdenek's patch on March 18 results in the instructions
> which use this RTX being removed from the instruction chain but for
> some reason we are still using reg_known_value[294].  I'll try to look
> into this.

This appears to be what's happening.  After gcse, we have:

(insn 529 527 530 43 ../../gcc/gcc/caller-save.c:713 (set (reg/v/f:DI 294 [ to_save ])
        (plus:DI (reg/f:DI 3 %r3)
	    (const_int 272 [0x110]))) 158 {*pa.md:4807} (nil)
   (nil))

Loop changes this to:

(insn 1435 1434 1437 (set (reg/f:DI 576)
        (plus:DI (reg/f:DI 3 %r3)
	    (const_int 272 [0x110]))) -1 (nil)
   (nil))

...

(insn 1436 511 1438 (set (reg/f:DI 491)
        (reg/f:DI 576)) -1 (nil)
    (nil))

...

(insn 1298 1024 533 (set (reg/v/f:DI 294 [ to_save ])
        (reg/f:DI 491)) -1 (nil)
    (nil))

So, we still have reg/v/f:DI 294 but the rtx is reg_known_value[294]
has been orphaned.  ggc_collect poisons the rtx.  Then, the next time
scan_loop is called we have a problem with the value for reg 294.

Maybe my patch is the best solution.  However, I think Zdenek should
look at this.  The problem may have been introduced with this change:

2004-03-18  Zdenek Dvorak  <rakdver@atrey.karlin.mff.cuni.cz>

        * doloop.c: Removed.
	* loop-doloop.c: New file.
	* Makefile.in (doloop.o): Remove.
	(loop-doloop.o): New.
	* cfgloop.h (get_loop_level, doloop_optimize_loops): Declare.
	* cfgloopanal.c (get_loop_level): New function.
	* loop-iv.c (iv_number_of_iterations): Handle case when loop
	is leaved immediatelly.
	* loop.c (strength_reduce): Do not call doloop optimization.
	* loop.h (LOOP_BCT): Removed.
	* passes.c (rest_of_handle_loop_optimize): Do not use LOOP_BCT.
	(rest_of_handle_loop2): Call doloop_optimize_loops.
	(rest_of_compilation): Test for optimizations moved to
	rest_of_handle_loop2.

However, if that's not the case, then the problem applies to 3.3
and 3.4 as well.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Mark Mitchell]

John David Anglin wrote:

>>This suggests that Zdenek's patch on March 18 results in the instructions
>>which use this RTX being removed from the instruction chain but for
>>some reason we are still using reg_known_value[294].  I'll try to look
>>into this.
> 
> 
> This appears to be what's happening.  After gcse, we have:

Thanks for continuing to track this down.

> Maybe my patch is the best solution.  However, I think Zdenek should
> look at this.  

Yes, please.  Zdenek?

-- 
Mark Mitchell
CodeSourcery, LLC
mark@codesourcery.com

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Zdenek Dvorak]

Hello,

> > This suggests that Zdenek's patch on March 18 results in the instructions
> > which use this RTX being removed from the instruction chain but for
> > some reason we are still using reg_known_value[294].  I'll try to look
> > into this.
> 
> This appears to be what's happening.  After gcse, we have:
> 
> (insn 529 527 530 43 ../../gcc/gcc/caller-save.c:713 (set (reg/v/f:DI 294 [ to_save ])
>         (plus:DI (reg/f:DI 3 %r3)
> 	    (const_int 272 [0x110]))) 158 {*pa.md:4807} (nil)
>    (nil))
> 
> Loop changes this to:
> 
> (insn 1435 1434 1437 (set (reg/f:DI 576)
>         (plus:DI (reg/f:DI 3 %r3)
> 	    (const_int 272 [0x110]))) -1 (nil)
>    (nil))
> 
> ...
> 
> (insn 1436 511 1438 (set (reg/f:DI 491)
>         (reg/f:DI 576)) -1 (nil)
>     (nil))
> 
> ...
> 
> (insn 1298 1024 533 (set (reg/v/f:DI 294 [ to_save ])
>         (reg/f:DI 491)) -1 (nil)
>     (nil))
> 
> So, we still have reg/v/f:DI 294 but the rtx is reg_known_value[294]
> has been orphaned.  ggc_collect poisons the rtx.  Then, the next time
> scan_loop is called we have a problem with the value for reg 294.

this does not make sense.  reg_known_value is declared (at least in
mainline) as

static GTY((length("reg_known_value_size"))) rtx *reg_known_value;

so it should keep its members alive by itself (provided that
reg_known_value_size is large enough, which it should be given
the way it is used).

> Maybe my patch is the best solution.  However, I think Zdenek should
> look at this.  The problem may have been introduced with this change:
> 
> 2004-03-18  Zdenek Dvorak  <rakdver@atrey.karlin.mff.cuni.cz>
> 
>         * doloop.c: Removed.
> 	* loop-doloop.c: New file.
> 	* Makefile.in (doloop.o): Remove.
> 	(loop-doloop.o): New.
> 	* cfgloop.h (get_loop_level, doloop_optimize_loops): Declare.
> 	* cfgloopanal.c (get_loop_level): New function.
> 	* loop-iv.c (iv_number_of_iterations): Handle case when loop
> 	is leaved immediatelly.
> 	* loop.c (strength_reduce): Do not call doloop optimization.
> 	* loop.h (LOOP_BCT): Removed.
> 	* passes.c (rest_of_handle_loop_optimize): Do not use LOOP_BCT.
> 	(rest_of_handle_loop2): Call doloop_optimize_loops.
> 	(rest_of_compilation): Test for optimizations moved to
> 	rest_of_handle_loop2.

Almost definitely not; it probably just exposes the problem by changing
the memory consumption and consequently the time when garbage
collections are triggered.

Zdenek

> However, if that's not the case, then the problem applies to 3.3
> and 3.4 as well.
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[John David Anglin]

> > So, we still have reg/v/f:DI 294 but the rtx is reg_known_value[294]
> > has been orphaned.  ggc_collect poisons the rtx.  Then, the next time
> > scan_loop is called we have a problem with the value for reg 294.
> 
> this does not make sense.  reg_known_value is declared (at least in
> mainline) as
> 
> static GTY((length("reg_known_value_size"))) rtx *reg_known_value;

Yes, it does.  At the time this problem first occurred, the prototype
was

rtx *reg_known_value;

Richard Henderson changed the prototype on March 24.  There have been
several problems appear on the hppa64 port and I was trying to deal
with them sequently.  PR 14829 ocurred just after, then the cgraph
merge by Jan Hubicka on April 2 introduced another problem.

I will check if Richard's change plus my fix for PR 14829
<http://gcc.gnu.org/ml/gcc-patches/2004-04/msg01021.html>
resolves the problem.  If it does, I think Richard's change needs
to be backported to 3.3 and 3.4.

Dave

-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Mark Mitchell]

Zdenek Dvorak wrote:

> Almost definitely not; it probably just exposes the problem by changing
> the memory consumption and consequently the time when garbage
> collections are triggered.

Even if that is so, it is still your responsibility to look into it.

Would you please help J. David to track down what's going on?

Thanks,

-- 
Mark Mitchell
CodeSourcery, LLC
mark@codesourcery.com

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Zdenek Dvorak]

Hello,

> Zdenek Dvorak wrote:
> 
> >Almost definitely not; it probably just exposes the problem by changing
> >the memory consumption and consequently the time when garbage
> >collections are triggered.
> 
> Even if that is so, it is still your responsibility to look into it.
> 
> Would you please help J. David to track down what's going on?

I believe that the problem should be fixed by the inclusion of GTY
markers on the reg_known_value (which probably should be added to
whatever other branches contain the fix for PR12440).

Zdenek

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[John David Anglin]

> > Zdenek Dvorak wrote:
> > 
> > >Almost definitely not; it probably just exposes the problem by changing
> > >the memory consumption and consequently the time when garbage
> > >collections are triggered.
> > 
> > Even if that is so, it is still your responsibility to look into it.
> > 
> > Would you please help J. David to track down what's going on?
> 
> I believe that the problem should be fixed by the inclusion of GTY
> markers on the reg_known_value (which probably should be added to
> whatever other branches contain the fix for PR12440).

With the CVS as of D2004.03.26.12.00.00 (i.e., GTY markers on the
reg_known_value array), GCC bootstraps with --enable-languages=c.
I'm now doing a full bootstrap.

I looked at the compilation that was failing with gdb.  However, due
to changes in memory consumption, garbage collection no longer occurs
while in loop_optimize.  I guess that Richard's patch would have
to be back ported to D2004.03.18.16.43.00 to be absolutely certain
whether it fixes the problem.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Zdenek Dvorak]

Hello,

> > > >Almost definitely not; it probably just exposes the problem by changing
> > > >the memory consumption and consequently the time when garbage
> > > >collections are triggered.
> > > 
> > > Even if that is so, it is still your responsibility to look into it.
> > > 
> > > Would you please help J. David to track down what's going on?
> > 
> > I believe that the problem should be fixed by the inclusion of GTY
> > markers on the reg_known_value (which probably should be added to
> > whatever other branches contain the fix for PR12440).
> 
> With the CVS as of D2004.03.26.12.00.00 (i.e., GTY markers on the
> reg_known_value array), GCC bootstraps with --enable-languages=c.
> I'm now doing a full bootstrap.
> 
> I looked at the compilation that was failing with gdb.  However, due
> to changes in memory consumption, garbage collection no longer occurs
> while in loop_optimize.

try setting --param ggc-min-expand=0 --param ggc-min-heapsize=0 (this
should force the garbage collection to occur always).

Zdenek

> I guess that Richard's patch would have
> to be back ported to D2004.03.18.16.43.00 to be absolutely certain
> whether it fixes the problem.
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[John David Anglin]

> > Zdenek Dvorak wrote:
> > 
> > >Almost definitely not; it probably just exposes the problem by changing
> > >the memory consumption and consequently the time when garbage
> > >collections are triggered.
> > 
> > Even if that is so, it is still your responsibility to look into it.
> > 
> > Would you please help J. David to track down what's going on?
> 
> I believe that the problem should be fixed by the inclusion of GTY
> markers on the reg_known_value (which probably should be added to
> whatever other branches contain the fix for PR12440).

The good news is that Richard's patch fixes the problem.  The bad
news is that the patch uses ggc_free which isn't in 3.3 and 3.4.
Implementing ggc_free looks like it would require back porting
3 or 4 more patches.

Richard wrote in
<http://gcc.gnu.org/ml/gcc-patches/2004-03/msg02057.html>:

  No idea why this is happening now, and apparently only to me, but
  the fact is that data gets put into reg_known_value and a call to
  ggc_collect happens before end_alias_analysis.  The call to collect
  happens during CSE, and is protected by a ggc_push_context, but it
  still doesn't seem terribly safe.

Thus, it would seem that the push and pop fix isn't safe.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Andrew Pinski]

On Apr 19, 2004, at 15:57, John David Anglin wrote:
>
> The good news is that Richard's patch fixes the problem.  The bad
> news is that the patch uses ggc_free which isn't in 3.3 and 3.4.
> Implementing ggc_free looks like it would require back porting
> 3 or 4 more patches.

Even better news is that ggc_free is really not need at all, it
is an optimization.  You should be able to replace the call to
ggc_free with set that variable to NULL and have it work.

-Andrew Pinski

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[John David Anglin]

> On Apr 19, 2004, at 15:57, John David Anglin wrote:
> >
> > The good news is that Richard's patch fixes the problem.  The bad
> > news is that the patch uses ggc_free which isn't in 3.3 and 3.4.
> > Implementing ggc_free looks like it would require back porting
> > 3 or 4 more patches.
> 
> Even better news is that ggc_free is really not need at all, it
> is an optimization.  You should be able to replace the call to
> ggc_free with set that variable to NULL and have it work.

Enclosed is a backport of Richard's patch to 3.4.  The only functional
difference is the removal of the ggc_free call from end_alias_analysis.
I believe that this just defers garbage collection of reg_known_value.

I've tested the patch on hppa64-hp-hpux11.00 and hppa-unknown-linux-gnu
with no regressions.

Ok for 3.4?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2004-04-20  Richard Henderson  <rth@redhat.com>

	PR bootstrap/14671
        * alias.c (alias_invariant, alias_invariant_size): Mark GTY.
        (reg_known_value, reg_known_value_size): Likewise; make static.
        (reg_known_equiv_p): Make static.
        (clear_reg_alias_info): Update for new indexing.
        (get_reg_known_value, set_reg_known_value): New.
        (get_reg_known_equiv_p, set_reg_known_equiv_p): New.
        (canon_rtx): Use them. 
        (init_alias_analysis): Likewise.  Allocate reg_known_value with gc.
        Don't play queer offsetting games with reg_known_value and
        reg_known_equiv_p.
        (end_alias_analysis): Don't free reg_known_value.
        * rtl.h (get_reg_known_value, get_reg_known_equiv_p): Declare.
        * sched-deps.c (reg_known_equiv_p, reg_known_value): Remove.
        (deps_may_trap_p, sched_analyze_1, sched_analyze_2): Use the new
        functions instead.

Index: alias.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/alias.c,v
retrieving revision 1.209.2.4
diff -u -3 -p -r1.209.2.4 alias.c
--- alias.c	12 Feb 2004 23:28:27 -0000	1.209.2.4
+++ alias.c	19 Apr 2004 20:13:15 -0000
@@ -181,17 +181,16 @@ static GTY (()) rtx static_reg_base_valu
 
    Because this array contains only pseudo registers it has no effect
    after reload.  */
-static rtx *alias_invariant;
-unsigned int alias_invariant_size;
+static GTY((length("alias_invariant_size"))) rtx *alias_invariant;
+unsigned GTY(()) int alias_invariant_size;
 
 /* Vector indexed by N giving the initial (unchanging) value known for
-   pseudo-register N.  This array is initialized in
-   init_alias_analysis, and does not change until end_alias_analysis
-   is called.  */
-rtx *reg_known_value;
+   pseudo-register N.  This array is initialized in init_alias_analysis,
+   and does not change until end_alias_analysis is called.  */
+static GTY((length("reg_known_value_size"))) rtx *reg_known_value;
 
 /* Indicates number of valid entries in reg_known_value.  */
-static unsigned int reg_known_value_size;
+static GTY(()) unsigned int reg_known_value_size;
 
 /* Vector recording for each reg_known_value whether it is due to a
    REG_EQUIV note.  Future passes (viz., reload) may replace the
@@ -205,7 +204,7 @@ static unsigned int reg_known_value_size
    REG_EQUIV notes.  One could argue that the REG_EQUIV notes are
    wrong, but solving the problem in the scheduler will likely give
    better code, so we do it here.  */
-char *reg_known_equiv_p;
+static bool *reg_known_equiv_p;
 
 /* True when scanning insns from the start of the rtl to the
    NOTE_INSN_FUNCTION_BEG note.  */
@@ -1061,10 +1060,70 @@ clear_reg_alias_info (rtx reg)
 {
   unsigned int regno = REGNO (reg);
 
-  if (regno < reg_known_value_size && regno >= FIRST_PSEUDO_REGISTER)
-    reg_known_value[regno] = reg;
+  if (regno >= FIRST_PSEUDO_REGISTER)
+    {
+      regno -= FIRST_PSEUDO_REGISTER;
+      if (regno < reg_known_value_size)
+	{
+	  reg_known_value[regno] = reg;
+	  reg_known_equiv_p[regno] = false;
+	}
+    }
+}
+
+/* If a value is known for REGNO, return it.  */
+
+rtx 
+get_reg_known_value (unsigned int regno)
+{
+  if (regno >= FIRST_PSEUDO_REGISTER)
+    {
+      regno -= FIRST_PSEUDO_REGISTER;
+      if (regno < reg_known_value_size)
+	return reg_known_value[regno];
+    }
+  return NULL;
 }
 
+/* Set it.  */
+
+static void
+set_reg_known_value (unsigned int regno, rtx val)
+{
+  if (regno >= FIRST_PSEUDO_REGISTER)
+    {
+      regno -= FIRST_PSEUDO_REGISTER;
+      if (regno < reg_known_value_size)
+	reg_known_value[regno] = val;
+    }
+}
+
+/* Similarly for reg_known_equiv_p.  */
+
+bool
+get_reg_known_equiv_p (unsigned int regno)
+{
+  if (regno >= FIRST_PSEUDO_REGISTER)
+    {
+      regno -= FIRST_PSEUDO_REGISTER;
+      if (regno < reg_known_value_size)
+	return reg_known_equiv_p[regno];
+    }
+  return false;
+}
+
+static void
+set_reg_known_equiv_p (unsigned int regno, bool val)
+{
+  if (regno >= FIRST_PSEUDO_REGISTER)
+    {
+      regno -= FIRST_PSEUDO_REGISTER;
+      if (regno < reg_known_value_size)
+	reg_known_equiv_p[regno] = val;
+    }
+}
+
+
 /* Returns a canonical version of X, from the point of view alias
    analysis.  (For example, if X is a MEM whose address is a register,
    and the register has a known value (say a SYMBOL_REF), then a MEM
@@ -1074,11 +1133,16 @@ rtx
 canon_rtx (rtx x)
 {
   /* Recursively look for equivalences.  */
-  if (GET_CODE (x) == REG && REGNO (x) >= FIRST_PSEUDO_REGISTER
-      && REGNO (x) < reg_known_value_size)
-    return reg_known_value[REGNO (x)] == x
-      ? x : canon_rtx (reg_known_value[REGNO (x)]);
-  else if (GET_CODE (x) == PLUS)
+  if (GET_CODE (x) == REG && REGNO (x) >= FIRST_PSEUDO_REGISTER)
+    {
+      rtx t = get_reg_known_value (REGNO (x));
+      if (t == x)
+	return x;
+      if (t)
+	return canon_rtx (t);
+    }
+
+  if (GET_CODE (x) == PLUS)
     {
       rtx x0 = canon_rtx (XEXP (x, 0));
       rtx x1 = canon_rtx (XEXP (x, 1));
@@ -2725,14 +2789,9 @@ init_alias_analysis (void)
 
   timevar_push (TV_ALIAS_ANALYSIS);
 
-  reg_known_value_size = maxreg;
-
-  reg_known_value
-    = (rtx *) xcalloc ((maxreg - FIRST_PSEUDO_REGISTER), sizeof (rtx))
-    - FIRST_PSEUDO_REGISTER;
-  reg_known_equiv_p
-    = (char*) xcalloc ((maxreg - FIRST_PSEUDO_REGISTER), sizeof (char))
-    - FIRST_PSEUDO_REGISTER;
+  reg_known_value_size = maxreg - FIRST_PSEUDO_REGISTER;
+  reg_known_value = ggc_calloc (reg_known_value_size, sizeof (rtx));
+  reg_known_equiv_p = xcalloc (reg_known_value_size, sizeof (bool));
 
   /* Overallocate reg_base_value to allow some growth during loop
      optimization.  Loop unrolling can create a large number of
@@ -2850,6 +2909,7 @@ init_alias_analysis (void)
 		{
 		  unsigned int regno = REGNO (SET_DEST (set));
 		  rtx src = SET_SRC (set);
+		  rtx t;
 
 		  if (REG_NOTES (insn) != 0
 		      && (((note = find_reg_note (insn, REG_EQUAL, 0)) != 0
@@ -2857,29 +2917,28 @@ init_alias_analysis (void)
 			  || (note = find_reg_note (insn, REG_EQUIV, NULL_RTX)) != 0)
 		      && GET_CODE (XEXP (note, 0)) != EXPR_LIST
 		      && ! rtx_varies_p (XEXP (note, 0), 1)
-		      && ! reg_overlap_mentioned_p (SET_DEST (set), XEXP (note, 0)))
+		      && ! reg_overlap_mentioned_p (SET_DEST (set),
+						    XEXP (note, 0)))
 		    {
-		      reg_known_value[regno] = XEXP (note, 0);
-		      reg_known_equiv_p[regno] = REG_NOTE_KIND (note) == REG_EQUIV;
+		      set_reg_known_value (regno, XEXP (note, 0));
+		      set_reg_known_equiv_p (regno,
+			REG_NOTE_KIND (note) == REG_EQUIV);
 		    }
 		  else if (REG_N_SETS (regno) == 1
 			   && GET_CODE (src) == PLUS
 			   && GET_CODE (XEXP (src, 0)) == REG
-			   && REGNO (XEXP (src, 0)) >= FIRST_PSEUDO_REGISTER
-			   && (reg_known_value[REGNO (XEXP (src, 0))])
+			   && (t = get_reg_known_value (REGNO (XEXP (src, 0))))
 			   && GET_CODE (XEXP (src, 1)) == CONST_INT)
 		    {
-		      rtx op0 = XEXP (src, 0);
-		      op0 = reg_known_value[REGNO (op0)];
-		      reg_known_value[regno]
-			= plus_constant (op0, INTVAL (XEXP (src, 1)));
-		      reg_known_equiv_p[regno] = 0;
+		      t = plus_constant (t, INTVAL (XEXP (src, 1)));
+		      set_reg_known_value (regno, t);
+		      set_reg_known_equiv_p (regno, 0);
 		    }
 		  else if (REG_N_SETS (regno) == 1
 			   && ! rtx_varies_p (src, 1))
 		    {
-		      reg_known_value[regno] = src;
-		      reg_known_equiv_p[regno] = 0;
+		      set_reg_known_value (regno, src);
+		      set_reg_known_equiv_p (regno, 0);
 		    }
 		}
 	    }
@@ -2906,9 +2965,9 @@ init_alias_analysis (void)
   while (changed && ++pass < MAX_ALIAS_LOOP_PASSES);
 
   /* Fill in the remaining entries.  */
-  for (i = FIRST_PSEUDO_REGISTER; i < (int)maxreg; i++)
+  for (i = 0; i < (int)reg_known_value_size; i++)
     if (reg_known_value[i] == 0)
-      reg_known_value[i] = regno_reg_rtx[i];
+      reg_known_value[i] = regno_reg_rtx[i + FIRST_PSEUDO_REGISTER];
 
   /* Simplify the reg_base_value array so that no register refers to
      another register, except to special registers indirectly through
@@ -2954,10 +3013,9 @@ void
 end_alias_analysis (void)
 {
   old_reg_base_value = reg_base_value;
-  free (reg_known_value + FIRST_PSEUDO_REGISTER);
   reg_known_value = 0;
   reg_known_value_size = 0;
-  free (reg_known_equiv_p + FIRST_PSEUDO_REGISTER);
+  free (reg_known_equiv_p);
   reg_known_equiv_p = 0;
   if (alias_invariant)
     {
Index: rtl.h
===================================================================
RCS file: /cvs/gcc/gcc/gcc/rtl.h,v
retrieving revision 1.448.4.4
diff -u -3 -p -r1.448.4.4 rtl.h
--- rtl.h	25 Mar 2004 16:44:43 -0000	1.448.4.4
+++ rtl.h	19 Apr 2004 20:13:15 -0000
@@ -2303,6 +2303,8 @@ extern void end_alias_analysis (void);
 extern rtx addr_side_effect_eval (rtx, int, int);
 extern bool memory_modified_in_insn_p (rtx, rtx);
 extern rtx find_base_term (rtx);
+extern rtx get_reg_known_value (unsigned int);
+extern bool get_reg_known_equiv_p (unsigned int);
 
 /* In sibcall.c */
 typedef enum {
Index: sched-deps.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/sched-deps.c,v
retrieving revision 1.65.2.1
diff -u -3 -p -r1.65.2.1 sched-deps.c
--- sched-deps.c	23 Jan 2004 23:36:02 -0000	1.65.2.1
+++ sched-deps.c	19 Apr 2004 20:13:15 -0000
@@ -44,8 +44,6 @@ Software Foundation, 59 Temple Place - S
 #include "cselib.h"
 #include "df.h"
 
-extern char *reg_known_equiv_p;
-extern rtx *reg_known_value;
 
 static regset_head reg_pending_sets_head;
 static regset_head reg_pending_clobbers_head;
@@ -113,10 +111,12 @@ deps_may_trap_p (rtx mem)
 {
   rtx addr = XEXP (mem, 0);
 
-  if (REG_P (addr)
-      && REGNO (addr) >= FIRST_PSEUDO_REGISTER
-      && reg_known_value[REGNO (addr)])
-    addr = reg_known_value[REGNO (addr)];
+  if (REG_P (addr) && REGNO (addr) >= FIRST_PSEUDO_REGISTER)
+    {
+      rtx t = get_reg_known_value (REGNO (addr));
+      if (t)
+	addr = t;
+    }
   return rtx_addr_can_trap_p (addr);
 }
 \f
@@ -523,10 +523,12 @@ sched_analyze_1 (struct deps *deps, rtx 
 	  /* Pseudos that are REG_EQUIV to something may be replaced
 	     by that during reloading.  We need only add dependencies for
 	     the address in the REG_EQUIV note.  */
-	  if (!reload_completed
-	      && reg_known_equiv_p[regno]
-	      && GET_CODE (reg_known_value[regno]) == MEM)
-	    sched_analyze_2 (deps, XEXP (reg_known_value[regno], 0), insn);
+	  if (!reload_completed && get_reg_known_equiv_p (regno))
+	    {
+	      rtx t = get_reg_known_value (regno);
+	      if (GET_CODE (t) == MEM)
+	        sched_analyze_2 (deps, XEXP (t, 0), insn);
+	    }
 
 	  /* Don't let it cross a call after scheduling if it doesn't
 	     already cross one.  */
@@ -659,10 +661,12 @@ sched_analyze_2 (struct deps *deps, rtx 
 	    /* Pseudos that are REG_EQUIV to something may be replaced
 	       by that during reloading.  We need only add dependencies for
 	       the address in the REG_EQUIV note.  */
-	    if (!reload_completed
-		&& reg_known_equiv_p[regno]
-		&& GET_CODE (reg_known_value[regno]) == MEM)
-	      sched_analyze_2 (deps, XEXP (reg_known_value[regno], 0), insn);
+	    if (!reload_completed && get_reg_known_equiv_p (regno))
+	      {
+		rtx t = get_reg_known_value (regno);
+		if (GET_CODE (t) == MEM)
+		  sched_analyze_2 (deps, XEXP (t, 0), insn);
+	      }
 
 	    /* If the register does not already cross any calls, then add this
 	       insn to the sched_before_next_call list so that it will still

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Mark Mitchell]

John David Anglin wrote:

>>On Apr 19, 2004, at 15:57, John David Anglin wrote:
>>    
>>
>>>The good news is that Richard's patch fixes the problem.  The bad
>>>news is that the patch uses ggc_free which isn't in 3.3 and 3.4.
>>>Implementing ggc_free looks like it would require back porting
>>>3 or 4 more patches.
>>>      
>>>
>>Even better news is that ggc_free is really not need at all, it
>>is an optimization.  You should be able to replace the call to
>>ggc_free with set that variable to NULL and have it work.
>>    
>>
>
>Enclosed is a backport of Richard's patch to 3.4.  The only functional
>difference is the removal of the ggc_free call from end_alias_analysis.
>I believe that this just defers garbage collection of reg_known_value.
>
>I've tested the patch on hppa64-hp-hpux11.00 and hppa-unknown-linux-gnu
>with no regressions.
>
>Ok for 3.4?
>  
>
Yes, this is OK.

-- 
Mark Mitchell
CodeSourcery, LLC
(916) 791-8304
mark@codesourcery.com

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Richard Henderson]

On Tue, Apr 20, 2004 at 12:04:52PM -0400, John David Anglin wrote:
> Ok for 3.4?

Looks ok to me; Mark's still got gate control.


r~

Re: [patch 3.3/3.4/3.5] Fix PR bootstrap/14671

[Gabriel Dos Reis]

Richard Henderson <rth@redhat.com> writes:

| On Tue, Apr 20, 2004 at 12:04:52PM -0400, John David Anglin wrote:
| > Ok for 3.4?
| 
| Looks ok to me; Mark's still got gate control.

OK for 3.3.4 then.

-- Gaby

Re: [committed 3.5] Fix DBX register numbering for hppa64

[John David Anglin]

Mark,

Is this ok for the 3.4 branch?  It fixes a couple of register numbering
issues on hppa64 with respect to the shift amount register (cr11).
This appears to be a cut and paste error and it probably has been around
from the beginning of the hppa64 port.  Thus, it's just a bug.

I believe that this change is safe.  It only affects hppa64.  The
change has been tested with 3.4 and 3.5 on hppa64-hp-hpux11.00.

> 2004-04-16  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
> 
> 	* pa64-regs.h (DBX_REGISTER_NUMBER): Simplify and correct mapping of
> 	SAR register.  Fix comment.
> 	(ADDITIONAL_REGISTER_NAMES): Correct register number of SAR register
> 	(%cr11).
> 
> Index: config/pa/pa64-regs.h
> ===================================================================
> RCS file: /cvs/gcc/gcc/gcc/config/pa/pa64-regs.h,v
> retrieving revision 1.15
> diff -u -3 -p -r1.15 pa64-regs.h
> --- config/pa/pa64-regs.h	15 Mar 2004 18:20:49 -0000	1.15
> +++ config/pa/pa64-regs.h	16 Apr 2004 14:53:42 -0000
> @@ -169,13 +169,11 @@ Boston, MA 02111-1307, USA.  */
>  
>     Registers 0  - 31 remain unchanged.
>  
> -   Registers 32 - 60 are mapped to 72, 74, 76 ...
> -
> -   Register 88 is mapped to 32.  */
> +   Registers 32 - 59 are mapped to 72, 74, 76 ...
>  
> +   Register 60 is mapped to 32.  */
>  #define DBX_REGISTER_NUMBER(REGNO) \
> -  ((REGNO) <= 31 ? (REGNO) :						\
> -   ((REGNO) > 31 && (REGNO) <= 60 ? (REGNO - 32) * 2 + 72 : 32))
> +  ((REGNO) <= 31 ? (REGNO) : ((REGNO) < 60 ? (REGNO - 32) * 2 + 72 : 32))
>  
>  /* We must not use the DBX register numbers for the DWARF 2 CFA column
>     numbers because that maps to numbers beyond FIRST_PSEUDO_REGISTER.
> @@ -292,7 +290,7 @@ enum reg_class { NO_REGS, R1_REGS, GENER
>   "%fr28", "%fr29",  "%fr30", "%fr31", "SAR"}
>  
>  #define ADDITIONAL_REGISTER_NAMES \
> - {{"%cr11",88}}
> + {{"%cr11",60}}
>  
>  #define FP_SAVED_REG_LAST 49
>  #define FP_SAVED_REG_FIRST 40
> 

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [committed 3.5] Fix DBX register numbering for hppa64

[Mark Mitchell]

John David Anglin wrote:

>Mark,
>
>Is this ok for the 3.4 branch?  It fixes a couple of register numbering
>issues on hppa64 with respect to the shift amount register (cr11).
>This appears to be a cut and paste error and it probably has been around
>from the beginning of the hppa64 port.  Thus, it's just a bug.
>  
>
OK.

Out of curiousity, what debugger are you using on hppa64-hp-hpux11.00 
and what options to you provide to GCC to get debugging information that 
works with that debugger?  We've tried a bunch of different combinations 
with varying levels of success, but I'd be interested in your experience.

Thanks,

-- 
Mark Mitchell
CodeSourcery, LLC
(916) 791-8304
mark@codesourcery.com

Re: [committed 3.5] Fix DBX register numbering for hppa64

[John David Anglin]

> Out of curiousity, what debugger are you using on hppa64-hp-hpux11.00 
> and what options to you provide to GCC to get debugging information that 
> works with that debugger?  We've tried a bunch of different combinations 
> with varying levels of success, but I'd be interested in your experience.

The situation is fairly miserable.  I have a collection of four or five
different builds and sometimes one will work better than another.  I
have a collection of hacks which improve things slightly.  Randolph
Chung is spending a bit of time working on gdb and hopefully things will
get better.

Mostly, I use the standard dwarf2 information on hppa64.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] Re: Fix problem with constant modulus

[John David Anglin]

> This patch is definite progress (the ada bootstrap on hppa-linux
> no longer fails with an assertion failure) but there are several
> testsuite regressions which are probably caused by the constant
> modulus changes.  For example, gcc.c-torture/execute/multdi-1.c
> now fails on hppa-unknown-linux-gnu.

Sorry, this message was erroneous.  I need to recheck.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

[ping] Unreviewed patch

[John David Anglin]

Could a global or dwarf2 maintainer review the following patch:

<http://gcc.gnu.org/ml/gcc-patches/2004-04/msg01021.html>?

Thanks,
Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [ping] Unreviewed patch

[Mark Mitchell]

John David Anglin wrote:

>Could a global or dwarf2 maintainer review the following patch:
>
><http://gcc.gnu.org/ml/gcc-patches/2004-04/msg01021.html>?
>  
>
Go ahead.

Thanks,

-- 
Mark Mitchell
CodeSourcery, LLC
(916) 791-8304
mark@codesourcery.com

Re: [PATCH]

[Ulrich Weigand]

I wrote:

> >+(define_insn "prologue_tpf"
> >+  [(unspec_volatile [(const_int 0)] UNSPECV_TPF_PROLOGUE)]
> >+  "TARGET_TPF"
> >+  "bas\t%%r1,4064"
> >+  [(set_attr "type" "jsr")])
> 
> We should have a (clobber (reg 1)) here at least ...

Oh, and we should have (set_attr "op_type" "RX") for
insn length computation and scheduling ...

Bye,
Ulrich

-- 
  Dr. Ulrich Weigand
  weigand@informatik.uni-erlangen.de

Re: [PATCH]

[Eric Christopher]

On Mon, 2004-05-03 at 17:47, Ulrich Weigand wrote:
> I wrote:
> 
> > >+(define_insn "prologue_tpf"
> > >+  [(unspec_volatile [(const_int 0)] UNSPECV_TPF_PROLOGUE)]
> > >+  "TARGET_TPF"
> > >+  "bas\t%%r1,4064"
> > >+  [(set_attr "type" "jsr")])
> > 
> > We should have a (clobber (reg 1)) here at least ...
> 
> Oh, and we should have (set_attr "op_type" "RX") for
> insn length computation and scheduling ...

That I can do. Thanks for the scheduling info :)

-eric

-- 
Eric Christopher <echristo@redhat.com>

Re: building sh-elf / sh-linux (Was: Re: [PATCH/RFA] PR target/13250)

[Joern Rennecke]

> 
> I'm not really happy with having the scheduler follow through jumps to
> find call / call-value-copy pairs.  I have now implemented
> the approach of deleting fixup_fallthru_exit_predecessor and making
> mid-function epilogues valid.
> There was also a real.c bug that got in the way.  I'm appending the patch
> set that I am currently testing; I'll submit the two new patches
> individually when they are tested.
> 
> 2004-06-04  J"orn Rennecke <joern.rennecke@superh.com>
> 
> 	* basic-block.h (could_fall_through): Declare.
> 	* cfganal.c (can_fallthru): Suceed if the target is EXIT_BLOCK_PTR.
> 	Fail if the source already has a fallthrough edge to the exit
> 	block pointer.
> 	(could_fall_through): New function.
> 	(make_edges): Check if we already have a fallthrough edge to the
> 	exit block pointer.
> 	cfglayout.c (fixup_fallthru_exit_predecessor): Delete.
> 	(cfg_layout_finalize): Don't call it.
> 	(fixup_reorder_chain): A fall through to the exit block does not
> 	require the block to come last.  Add sanity checks.
> 	* cfgrtl.c (rtl_split_edge): Add special handling of fall through
> 	edges to the exit block.
> 
> 2004-06-03  J"orn Rennecke <joern.rennecke@superh.com>
> 
> 	* real.c (do_add): Initialize r->signalling and r->canonical.
> 
> 2004-05-14  J"orn Rennecke <joern.rennecke@superh.com>
> 
> 	* sched-int.h (in_post_call_group_p): Change type to enum.
> 	* sched-deps.c (sched_analyze_insn):
> 	(sched_analyze): When in_post_call_group_p is post_call_initial,
> 	don't add a dependency, but still set SCHED_GROUP_P and CANT_MOVE,
> 	and also reset in_post_call_group_p to post_call.
> 	(sched_analyze): When the previous basic block ended in a CALL_INSN,
I've chosen a i686-pc-linux-gnu host for a bootstrap test.
For the unmodified control, I got a failure during stage1 building
crtbegin.o - cc1 throws a floating point exception. The patched
compiler has moved on to stage2 in the meantime.

Likewise, sh-elf (using sources from the 26th May as baseline) has suceeded
building and the sh1 big endian results are:

                === gcc Summary for sh-hms-sim ===

# of expected passes            25703
# of unexpected failures        29
# of unexpected successes       1
# of expected failures          68
# of unresolved testcases       5
# of untested testcases         28
# of unsupported tests          368

Considering that the controls don't build at all, I suppose I can say the
regression test passed.

Re: building sh-elf / sh-linux (Was: Re: [PATCH/RFA] PR target/13250)

[Joern Rennecke]

> I've chosen a i686-pc-linux-gnu host for a bootstrap test.
> For the unmodified control, I got a failure during stage1 building
> crtbegin.o - cc1 throws a floating point exception. The patched
> compiler has moved on to stage2 in the meantime.

Hmm, it's actually a stage2 failure, and it is the same with
and without patches.

Program received signal SIGFPE, Arithmetic exception.
0x08421ace in narrow_str_to_charconst (pfile=0x8590518, str=
      {len = 2, text = 0x85bcc78 "\n"}, pchars_seen=0xbfffe650, 
    unsignedp=0xbfffe654) at ../../srcw/libcpp/charset.c:1214
1214      size_t max_chars = CPP_OPTION (pfile, int_precision) / width;
(gdb) p width
$1 = 0
(gdb) l
1209    static cppchar_t
1210    narrow_str_to_charconst (cpp_reader *pfile, cpp_string str,
1211                             unsigned int *pchars_seen, int *unsignedp)
1212    {
1213      size_t width = CPP_OPTION (pfile, char_precision);
1214      size_t max_chars = CPP_OPTION (pfile, int_precision) / width;

Re: [PATCH] Fix PR target/16344

[John David Anglin]

> The problem is the PLT is moving from one invocation of cc1plus to
> another.  I'm not sure why.  Currently, function descriptors live in
> the PLT.  So, if it moves, the PCH is dead even if the text is in the
> same location as it was when the PCH file was written.  If this can't
> be fixed, then the only solution is to avoid writing out any function
> pointers.

It turns out that the PLT isn't moving.  The problem is a Makefile
issue.  The runtime libraries are being built with the training compiler
in a profiled build.  Then, we use the profiled feedback compiler
when the testsuite is run.  As a result, PCH is disabled.

I am testing the enclosed fix.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2004-07-07  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR target/16344
	* Makefile.tpl: Build runtime libraries with feedback based compiler.

Index: Makefile.tpl
===================================================================
RCS file: /cvs/gcc/gcc/Makefile.tpl,v
retrieving revision 1.79
diff -u -3 -p -r1.79 Makefile.tpl
--- Makefile.tpl	14 Jan 2004 20:09:37 -0000	1.79
+++ Makefile.tpl	7 Jul 2004 20:11:09 -0000
@@ -1177,18 +1177,18 @@ profiledbootstrap: all-bootstrap configu
 	@r=`${PWD_COMMAND}`; export r; \
 	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 	$(SET_LIB_PATH) \
-	echo "Bootstrapping the compiler"; \
+	echo "Bootstrapping the training compiler"; \
 	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stageprofile_build
 	@r=`${PWD_COMMAND}`; export r; \
-	s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
-	$(SET_LIB_PATH) \
-	echo "Building runtime libraries and training compiler"; \
-	$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
-	@r=`${PWD_COMMAND}`; export r; \
 	s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
 	$(SET_LIB_PATH) \
-	echo "Building feedback based compiler"; \
+	echo "Building the feedback based compiler"; \
 	cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) stagefeedback_build
+	@r=`${PWD_COMMAND}`; export r; \
+	s=`cd $(srcdir); ${PWD_COMMAND}` ; export s; \
+	$(SET_LIB_PATH) \
+	echo "Building the runtime libraries"; \
+	$(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
 
 .PHONY: cross
 cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld

Re: [PATCH] Fix PR target/16344

[Mark Mitchell]

John David Anglin wrote:

>>The problem is the PLT is moving from one invocation of cc1plus to
>>another.  I'm not sure why.  Currently, function descriptors live in
>>the PLT.  So, if it moves, the PCH is dead even if the text is in the
>>same location as it was when the PCH file was written.  If this can't
>>be fixed, then the only solution is to avoid writing out any function
>>pointers.
>>    
>>
>
>It turns out that the PLT isn't moving.  The problem is a Makefile
>issue.  The runtime libraries are being built with the training compiler
>in a profiled build.  Then, we use the profiled feedback compiler
>when the testsuite is run.  As a result, PCH is disabled.
>
>I am testing the enclosed fix.
>
That makes sense to me.  OK, if it works, and Geoff/others do not object.

-- 
Mark Mitchell
CodeSourcery, LLC
(916) 791-8304
mark@codesourcery.com

Re: [RFT/RFA] gimplify pa va_arg

[John David Anglin]

> The code generated for f4 is wrong.  Garbage is used for the first

Doh.  Just forget the last message.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: gimple va_arg for hppa

[John David Anglin]

> It looks as if std_expand_builtin_va_arg should handle this.  It looks

Oh crum, wrong routine.  However, we are still not aligning arguments
larger than a word on hppa64.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] DWARF-2 unwinder off-by-one problem with signal frames

[Ulrich Weigand]

> ChangeLog:
> 
>         * config/s390/linux.h (MD_FALLBACK_FRAME_STATE_FOR): For SIGSEGV and 
> 	SIGBUS signal frames, the PSW address points *to* the faulting
> 	instruction, not after it.
> 
> libjava/ChangeLog:
> 
> 	* include/s390-signal.c (SIGNAL_HANDLER): Use SIGINFO-style prototype.
> 	(struct old_s390_kernel_sigaction): Likewise for k_sa_handler.
> 	(MAKE_THROW_FRAME): Do not modify PSW address.
> 	(INIT_SEGV): Install SIGINFO-style signal handler.
> 	(INIT_FPE): Likewise.

I've committed this now.

Bye,
Ulrich

-- 
  Dr. Ulrich Weigand
  weigand@informatik.uni-erlangen.de

Re: [PATCH] Fix PR target/16304: AIX 4.x forward reference proble

[John David Anglin]

> > Do we actually need the thunk alias stuff for AIX?  AFAIK, things worked 
> > fine without that for a long time; I believe it was added for GNU/Linux 
> > magic.  Can we just diable thunk aliases for AIX?
> 
> I believe that can be done.

This is probably best done using the TARGET_USE_LOCAL_THUNK_ALIAS_P
macro that Danny Smith added to the main branch on 2004-04-08.  This
change could be back ported to 3.4.

Using a thunk alias avoids in some situations the linker adding a
stub between the thunk and thunk function.  Having a direct jump
from thunk to thunk function is necessary under HP-UX.  Thus, this
magic is important for systems other than GNU/Linux.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [committed] Fix pch/14940 on hppa-unknown-linux-gnu

[John David Anglin]

> 2004-11-22  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
> 
> 	PR pch/14940
> 	* config/host-linux.c (TRY_EMPTY_VM_SPACE): Define for __hppa__.

This scheme doesn't work on hppa-linux.  The issue is not finding empty space.
The problem is the kernel doesn't always return the same mmap address for
the pch file given the same start and length.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2004-11-27  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR pch/14940
	* config/host-linux.c (TRY_EMPTY_VM_SPACE): Revert 2004-11-22 change.

Index: config/host-linux.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/config/host-linux.c,v
retrieving revision 1.5
diff -u -3 -p -r1.5 host-linux.c
--- config/host-linux.c	23 Nov 2004 02:29:38 -0000	1.5
+++ config/host-linux.c	27 Nov 2004 16:51:09 -0000
@@ -77,8 +77,6 @@
 # define TRY_EMPTY_VM_SPACE	0x8000000000
 #elif defined(__s390__)
 # define TRY_EMPTY_VM_SPACE	0x60000000
-#elif defined(__hppa__)
-# define TRY_EMPTY_VM_SPACE	0xa0000000
 #elif defined(__sparc__) && defined(__LP64__)
 # define TRY_EMPTY_VM_SPACE	0x8000000000
 #elif defined(__sparc__)

[ping] Fix PR target/16304: AIX 4.x forward reference problem

[John David Anglin]

Would someone please review the following patch:

<http://gcc.gnu.org/ml/gcc-patches/2004-10/msg02685.html>.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch] Fix for PR 14838

[John David Anglin]

> The enclosed change fixes PR 14838.  It makes get_first_nonnote_insn
> and get_last_nonnote_insn more conservative in that they no longer
> assume that the first/last insn is always a note insn.
> 
> The only users of these two functions are pa.c and avr.c.

I'm afraid the fix for PR 14838 fixed one problem and introduced another
<http://gcc.gnu.org/bugzilla/show_bug.cgi?id=18730>.  I failed to consider
the case where the first/last insn is a sequence.

This change fixes the bootstrap failure of the hppa1.1-hp-hpux10.20.
Tested on hppa1.1-hp-hpux10.20, hppa2.0w-hp-hpux11.11 and
hppa64-hp-hpux11.11 for the last week with no regressions.

Ok for 3.3, 3.4 and main?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2004-12-04  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR middle-end/18730
	* emit-rtl.c (get_first_nonnote_insn, get_last_nonnote_insn): When
	the first/last insn is a sequence, return the first/last insn of the
	sequence.

Index: emit-rtl.c
===================================================================
RCS file: /cvs/gcc/gcc/gcc/emit-rtl.c,v
retrieving revision 1.365.4.6
diff -u -3 -p -r1.365.4.6 emit-rtl.c
--- emit-rtl.c	23 Nov 2004 03:01:10 -0000	1.365.4.6
+++ emit-rtl.c	30 Nov 2004 03:43:47 -0000
@@ -2908,9 +2908,22 @@ get_last_insn_anywhere (void)
 rtx
 get_first_nonnote_insn (void)
 {
-  rtx insn;
+  rtx insn = first_insn;
+
+  if (insn)
+    {
+      if (NOTE_P (insn))
+	for (insn = next_insn (insn);
+	     insn && NOTE_P (insn);
+	     insn = next_insn (insn));
+      else
+	{
+	  if (GET_CODE (insn) == INSN
+	      && GET_CODE (PATTERN (insn)) == SEQUENCE)
+	    insn = XVECEXP (PATTERN (insn), 0, 0);
+	}
+    }
 
-  for (insn = first_insn; insn && NOTE_P (insn); insn = next_insn (insn));
   return insn;
 }
 
@@ -2920,9 +2933,23 @@ get_first_nonnote_insn (void)
 rtx
 get_last_nonnote_insn (void)
 {
-  rtx insn;
+  rtx insn = last_insn;
+
+  if (insn)
+    {
+      if (NOTE_P (insn))
+	for (insn = previous_insn (insn);
+	     insn && NOTE_P (insn);
+	     insn = previous_insn (insn));
+      else
+	{
+	  if (GET_CODE (insn) == INSN
+	      && GET_CODE (PATTERN (insn)) == SEQUENCE)
+	    insn = XVECEXP (PATTERN (insn), 0,
+			    XVECLEN (PATTERN (insn), 0) - 1);
+	}
+    }
 
-  for (insn = last_insn; insn && NOTE_P (insn); insn = previous_insn (insn));
   return insn;
 }
 

Re: [patch] Fix for PR 14838

[Richard Henderson]

On Sat, Dec 04, 2004 at 07:01:16PM -0500, John David Anglin wrote:
> +	for (insn = next_insn (insn);
> +	     insn && NOTE_P (insn);
> +	     insn = next_insn (insn));

Please put a "continue;" on the next line.

Otherwise it looks ok.


r~

Re: [patch] Fix for PR 14838

[Gabriel Dos Reis]

On Sat, 4 Dec 2004, John David Anglin wrote:

| > The enclosed change fixes PR 14838.  It makes get_first_nonnote_insn
| > and get_last_nonnote_insn more conservative in that they no longer
| > assume that the first/last insn is always a note insn.
| >
| > The only users of these two functions are pa.c and avr.c.
|
| I'm afraid the fix for PR 14838 fixed one problem and introduced another
| <http://gcc.gnu.org/bugzilla/show_bug.cgi?id=18730>.  I failed to consider
| the case where the first/last insn is a sequence.
|
| This change fixes the bootstrap failure of the hppa1.1-hp-hpux10.20.
| Tested on hppa1.1-hp-hpux10.20, hppa2.0w-hp-hpux11.11 and
| hppa64-hp-hpux11.11 for the last week with no regressions.
|
| Ok for 3.3, 3.4 and main?

OK for 3.3.x when it goes in 3.4.x (with modification as suggested by RTH).

-- Gaby

Re: [committed] Fix PR target/17643 on main and 3.4, and 3.3

[John David Anglin]

> main and 3.4 branch.  3.3 needs a different fix.

Here is the 3.3 fix.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2004-12-26  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR target/17643
	* config/pa/pa32-linux.h (FUNCTION_OK_FOR_SIBCALL): Return false when
	TARGET_PORTABLE_RUNTIME is true.

Index: config/pa/pa32-linux.h
===================================================================
RCS file: /cvs/gcc/gcc/gcc/config/pa/pa32-linux.h,v
retrieving revision 1.10
diff -u -3 -p -r1.10 pa32-linux.h
--- config/pa/pa32-linux.h	6 Dec 2002 02:54:38 -0000	1.10
+++ config/pa/pa32-linux.h	27 Dec 2004 02:41:23 -0000
@@ -28,7 +28,7 @@ Boston, MA 02111-1307, USA.  */
    pointer into the frame.  This target does not need multiple
    subspace stubs, so we allow sibcalls to all functions.  */
 #undef FUNCTION_OK_FOR_SIBCALL
-#define FUNCTION_OK_FOR_SIBCALL(DECL) 1
+#define FUNCTION_OK_FOR_SIBCALL(DECL) (!TARGET_PORTABLE_RUNTIME)
 
 /* The libcall __canonicalize_funcptr_for_compare is referenced in
    crtend.o and the reference isn't resolved in objects that don't

Re: Change to gcc.dg/tree-ssa/loop-1.c

[John David Anglin]

> FAIL: gcc.dg/tree-ssa/loop-1.c scan-assembler-times foo 5

Maybe this is fixed, I'll recheck.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Change to gcc.dg/tree-ssa/loop-1.c

[John David Anglin]

> > FAIL: gcc.dg/tree-ssa/loop-1.c scan-assembler-times foo 5
> 
> Maybe this is fixed, I'll recheck.

The reason the test was the way it was is the "foo" form passes on
hppa elf targets that don't include an external definition for foo.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Change to gcc.dg/tree-ssa/loop-1.c

[John David Anglin]

> > > FAIL: gcc.dg/tree-ssa/loop-1.c scan-assembler-times foo 5
> > 
> > Maybe this is fixed, I'll recheck.
> 
> The reason the test was the way it was is the "foo" form passes on
> hppa elf targets that don't include an external definition for foo.

For example on hppa-unknown-linux-gnu, I got the following results:

Executing on host: /home/dave/gnu/gcc-4.0/objdir/gcc/xgcc -B/home/dave/gnu/gcc-4.0/objdir/gcc/ /home/dave/gnu/gcc-4.0/gcc/gcc/testsuite/gcc.dg/tree-ssa/loop-1.c -O1 -ftree-loop-ivcanon -funroll-loops -fdump-tree-ivcanon-details -fdump-tree-cunroll-details -fdump-tree-vars -S  -o loop-1.s    (timeout = 300)
PASS: gcc.dg/tree-ssa/loop-1.c (test for excess errors)
PASS: gcc.dg/tree-ssa/loop-1.c scan-tree-dump-times Added canonical iv to loop 1, 4 iterations 1
PASS: gcc.dg/tree-ssa/loop-1.c scan-tree-dump-times Unrolled loop 1 completely 1
PASS: gcc.dg/tree-ssa/loop-1.c scan-tree-dump-times foo 5
ERROR: gcc.dg/tree-ssa/loop-1.c: error executing dg-final: scan-assembler: too many arguments
UNRESOLVED: gcc.dg/tree-ssa/loop-1.c: error executing dg-final: scan-assembler: too many arguments

I also saw the ERROR on hppa64-hp-hpux11.11.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Change to gcc.dg/tree-ssa/loop-1.c

[Steve Ellcey]

> PASS: gcc.dg/tree-ssa/loop-1.c scan-tree-dump-times foo 5
> ERROR: gcc.dg/tree-ssa/loop-1.c: error executing dg-final: scan-assembler: too many arguments
> UNRESOLVED: gcc.dg/tree-ssa/loop-1.c: error executing dg-final: scan-assembler: too many arguments
> 
> I also saw the ERROR on hppa64-hp-hpux11.11.

Yes, this was a bug in my original patch.  Can you make sure you have
the latest (checked in this morning) version of loop-1.c and re-run.
You should get an XFAIL (maybe an XPASS on hppa elf targets if they have
no external declarations) but no FAIL and no ERROR using the latest
version of this test case.

Steve Ellcey
sje@cup.hp.com

Re: Change to gcc.dg/tree-ssa/loop-1.c

[John David Anglin]

> You should get an XFAIL (maybe an XPASS on hppa elf targets if they have
> no external declarations) but no FAIL and no ERROR using the latest
> version of this test case.

We now have an XFAIL on SOM and an XPASS on ELF.  I don't see this as
progress as the XPASS isn't unexpected.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Change to gcc.dg/tree-ssa/loop-1.c

[Steve Ellcey]

> > You should get an XFAIL (maybe an XPASS on hppa elf targets if they have
> > no external declarations) but no FAIL and no ERROR using the latest
> > version of this test case.
> 
> We now have an XFAIL on SOM and an XPASS on ELF.  I don't see this as
> progress as the XPASS isn't unexpected.
> 
> Dave

I didn't realize we would get any XPASS's but I only tested the HP-UX
targets.  I don't see any way to get rid of both the XPASS's and XFAIL's
without using if statements which Janis Johnson didn't want me doing.
See the discussion starting at:

	http://gcc.gnu.org/ml/gcc-patches/2005-01/msg00545.html
	

How about the following patch (untested), it should get rid of the
XPASS's and leave only some XFAIL's by checking for hppa*-*-hpux*
instead of hppa*-*-*:


2005-01-21  Steve Ellcey  <sje@cup.hp.com>

	* gcc.dg/tree-ssa/loop-1.c:  Fix target names for hppa.


*** gcc.orig/gcc/testsuite/gcc.dg/tree-ssa/loop-1.c	Fri Jan 21 08:42:04 2005
--- gcc/gcc/testsuite/gcc.dg/tree-ssa/loop-1.c	Fri Jan 21 08:42:38 2005
*************** void xxx(void)
*** 29,36 ****
     well as the calls we need to look for something more specific then just
     foo in order to count only the calls and not the declaration.  */
  
! /* { dg-final { scan-assembler-times "foo" 5 { xfail hppa*-*-* ia64*-*-* } } } */
! /* { dg-final { scan-assembler-times "foo,%r" 5 { target hppa*-*-* } } } */
  /* { dg-final { scan-assembler-times "= foo"  5 { target ia64*-*-* } } } */
  
  
--- 29,36 ----
     well as the calls we need to look for something more specific then just
     foo in order to count only the calls and not the declaration.  */
  
! /* { dg-final { scan-assembler-times "foo" 5 { xfail hppa*-*-hpux* ia64*-*-* } } } */
! /* { dg-final { scan-assembler-times "foo,%r" 5 { target hppa*-*-hpux* } } } */
  /* { dg-final { scan-assembler-times "= foo"  5 { target ia64*-*-* } } } */
  
  

Re: Change to gcc.dg/tree-ssa/loop-1.c

[John David Anglin]

> How about the following patch (untested), it should get rid of the
> XPASS's and leave only some XFAIL's by checking for hppa*-*-hpux*
> instead of hppa*-*-*:

I think that this approach will work but I believe that you also need
to check for hppa*-*-rtems*.  It includes pa/elf.h which defines
ASM_OUTPUT_EXTERNAL.

This would all be simpler with a target skip mechanism.

I'm running a check of your change on hppa64-hp-hpux11.11.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Change to gcc.dg/tree-ssa/loop-1.c

[Janis Johnson]

On Fri, Jan 21, 2005 at 12:41:24PM -0500, John David Anglin wrote:
> > How about the following patch (untested), it should get rid of the
> > XPASS's and leave only some XFAIL's by checking for hppa*-*-hpux*
> > instead of hppa*-*-*:
> 
> I think that this approach will work but I believe that you also need
> to check for hppa*-*-rtems*.  It includes pa/elf.h which defines
> ASM_OUTPUT_EXTERNAL.
> 
> This would all be simpler with a target skip mechanism.

Or logical expressions in target and xfail lists.  See my new proposal
in http://gcc.gnu.org/ml/gcc/2005-01/msg01264.html.

Janis

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[John David Anglin]

Here is take 2.  The changes from the previous version are all to the
file s-osinte-linux-hppa.ads:

1) Definition of struct_sigaction corrected,
2) Definition of SA_SIGINFO corrected,
3) sigset_t changed to array of unsigned_long.

There is one x86'ism, the record Machine_State.  This is unused
and there apparently needs to be a cleanup in other files.  Laurent
said that he would address this issue in a followup patch.

Tested on hppa-unknown-linux-gnu:
<http://gcc.gnu.org/ml/gcc-testresults/2005-04/msg00400.html>.  There
was a further reduction in the number of testsuite fails to 11.

Ok?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2005-04-06  Laurent GUERBY  <laurent@guerby.net>
	    John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* Makefile.in: Add make ifeq define for hppa linux tasking support.
	* system-hpux.ads: Define Signed_Zeros to be True.
	* system-linux-hppa.ads, s-osinte-linux-hppa.ads: New files.

Index: Makefile.in
===================================================================
RCS file: /cvs/gcc/gcc/gcc/ada/Makefile.in,v
retrieving revision 1.115
diff -u -3 -p -r1.115 Makefile.in
--- Makefile.in	29 Mar 2005 16:16:59 -0000	1.115
+++ Makefile.in	5 Apr 2005 23:08:06 -0000
@@ -1365,6 +1365,31 @@ ifeq ($(strip $(filter-out sparc% linux%
   LIBRARY_VERSION := $(LIB_VERSION)
 endif
 
+ifeq ($(strip $(filter-out hppa% linux%,$(arch) $(osys))),)
+  LIBGNAT_TARGET_PAIRS = \
+  a-intnam.ads<a-intnam-linux.ads \
+  s-inmaop.adb<s-inmaop-posix.adb \
+  s-intman.adb<s-intman-posix.adb \
+  s-osinte.adb<s-osinte-posix.adb \
+  s-osinte.ads<s-osinte-linux-hppa.ads \
+  s-osprim.adb<s-osprim-posix.adb \
+  s-taprop.adb<s-taprop-linux.adb \
+  s-taspri.ads<s-taspri-linux.ads \
+  s-tpopsp.adb<s-tpopsp-posix-foreign.adb \
+  s-parame.adb<s-parame-linux.adb \
+  system.ads<system-linux-hppa.ads
+
+  TOOLS_TARGET_PAIRS =  \
+    mlib-tgt.adb<mlib-tgt-linux.adb \
+    indepsw.adb<indepsw-linux.adb
+
+  THREADSLIB = -lpthread
+  GNATLIB_SHARED = gnatlib-shared-dual
+  GMEM_LIB = gmemlib
+  PREFIX_OBJS = $(PREFIX_REAL_OBJS)
+  LIBRARY_VERSION := $(LIB_VERSION)
+endif
+
 ifeq ($(strip $(filter-out %ia64 linux%,$(arch) $(osys))),)
   LIBGNAT_TARGET_PAIRS = \
   a-intnam.ads<a-intnam-linux.ads \
Index: system-hpux.ads
===================================================================
RCS file: /cvs/gcc/gcc/gcc/ada/system-hpux.ads,v
retrieving revision 1.3
diff -u -3 -p -r1.3 system-hpux.ads
--- system-hpux.ads	15 Mar 2005 15:45:58 -0000	1.3
+++ system-hpux.ads	5 Apr 2005 23:08:06 -0000
@@ -130,7 +130,7 @@ private
    Machine_Rounds            : constant Boolean := True;
    OpenVMS                   : constant Boolean := False;
    Preallocated_Stacks       : constant Boolean := False;
-   Signed_Zeros              : constant Boolean := False;
+   Signed_Zeros              : constant Boolean := True;
    Stack_Check_Default       : constant Boolean := False;
    Stack_Check_Probes        : constant Boolean := False;
    Support_64_Bit_Divides    : constant Boolean := True;
--- /dev/null	2005-03-26 22:51:43.000000000 -0500
+++ system-linux-hppa.ads	2005-04-04 15:58:14.000000000 -0400
@@ -0,0 +1,151 @@
+------------------------------------------------------------------------------
+--                                                                          --
+--                        GNAT RUN-TIME COMPONENTS                          --
+--                                                                          --
+--                               S Y S T E M                                --
+--                                                                          --
+--                                 S p e c                                  --
+--                          (GNU/Linux-HPPA Version)                        --
+--                                                                          --
+--          Copyright (C) 1992-2005 Free Software Foundation, Inc.          --
+--                                                                          --
+-- This specification is derived from the Ada Reference Manual for use with --
+-- GNAT. The copyright notice above, and the license provisions that follow --
+-- apply solely to the  contents of the part following the private keyword. --
+--                                                                          --
+-- GNAT is free software;  you can  redistribute it  and/or modify it under --
+-- terms of the  GNU General Public License as published  by the Free Soft- --
+-- ware  Foundation;  either version 2,  or (at your option) any later ver- --
+-- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --
+-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
+-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License --
+-- for  more details.  You should have  received  a copy of the GNU General --
+-- Public License  distributed with GNAT;  see file COPYING.  If not, write --
+-- to  the Free Software Foundation,  59 Temple Place - Suite 330,  Boston, --
+-- MA 02111-1307, USA.                                                      --
+--                                                                          --
+-- As a special exception,  if other files  instantiate  generics from this --
+-- unit, or you link  this unit with other files  to produce an executable, --
+-- this  unit  does not  by itself cause  the resulting  executable  to  be --
+-- covered  by the  GNU  General  Public  License.  This exception does not --
+-- however invalidate  any other reasons why  the executable file  might be --
+-- covered by the  GNU Public License.                                      --
+--                                                                          --
+-- GNAT was originally developed  by the GNAT team at  New York University. --
+-- Extensive contributions were provided by Ada Core Technologies Inc.      --
+--                                                                          --
+------------------------------------------------------------------------------
+
+package System is
+pragma Pure (System);
+--  Note that we take advantage of the implementation permission to
+--  make this unit Pure instead of Preelaborable, see RM 13.7(36)
+
+   type Name is (SYSTEM_NAME_GNAT);
+   System_Name : constant Name := SYSTEM_NAME_GNAT;
+
+   --  System-Dependent Named Numbers
+
+   Min_Int               : constant := Long_Long_Integer'First;
+   Max_Int               : constant := Long_Long_Integer'Last;
+
+   Max_Binary_Modulus    : constant := 2 ** Long_Long_Integer'Size;
+   Max_Nonbinary_Modulus : constant := Integer'Last;
+
+   Max_Base_Digits       : constant := Long_Long_Float'Digits;
+   Max_Digits            : constant := Long_Long_Float'Digits;
+
+   Max_Mantissa          : constant := 63;
+   Fine_Delta            : constant := 2.0 ** (-Max_Mantissa);
+
+   Tick                  : constant := 0.000_001;
+
+   --  Storage-related Declarations
+
+   type Address is private;
+   Null_Address : constant Address;
+
+   Storage_Unit : constant := 8;
+   Word_Size    : constant := 32;
+   Memory_Size  : constant := 2 ** 32;
+
+   --  Address comparison
+
+   function "<"  (Left, Right : Address) return Boolean;
+   function "<=" (Left, Right : Address) return Boolean;
+   function ">"  (Left, Right : Address) return Boolean;
+   function ">=" (Left, Right : Address) return Boolean;
+   function "="  (Left, Right : Address) return Boolean;
+
+   pragma Import (Intrinsic, "<");
+   pragma Import (Intrinsic, "<=");
+   pragma Import (Intrinsic, ">");
+   pragma Import (Intrinsic, ">=");
+   pragma Import (Intrinsic, "=");
+
+   --  Other System-Dependent Declarations
+
+   type Bit_Order is (High_Order_First, Low_Order_First);
+   Default_Bit_Order : constant Bit_Order := High_Order_First;
+
+   --  Priority-related Declarations (RM D.1)
+
+   Max_Priority           : constant Positive := 30;
+   Max_Interrupt_Priority : constant Positive := 31;
+
+   subtype Any_Priority       is Integer      range  0 .. 31;
+   subtype Priority           is Any_Priority range  0 .. 30;
+   subtype Interrupt_Priority is Any_Priority range 31 .. 31;
+
+   Default_Priority : constant Priority := 15;
+
+private
+
+   type Address is mod Memory_Size;
+   Null_Address : constant Address := 0;
+
+   --------------------------------------
+   -- System Implementation Parameters --
+   --------------------------------------
+
+   --  These parameters provide information about the target that is used
+   --  by the compiler. They are in the private part of System, where they
+   --  can be accessed using the special circuitry in the Targparm unit
+   --  whose source should be consulted for more detailed descriptions
+   --  of the individual switch values.
+
+   AAMP                      : constant Boolean := False;
+   Backend_Divide_Checks     : constant Boolean := False;
+   Backend_Overflow_Checks   : constant Boolean := False;
+   Command_Line_Args         : constant Boolean := True;
+   Configurable_Run_Time     : constant Boolean := False;
+   Denorm                    : constant Boolean := True;
+   Duration_32_Bits          : constant Boolean := False;
+   Exit_Status_Supported     : constant Boolean := True;
+   Fractional_Fixed_Ops      : constant Boolean := False;
+   Frontend_Layout           : constant Boolean := False;
+   Functions_Return_By_DSP   : constant Boolean := False;
+   Machine_Overflows         : constant Boolean := False;
+   Machine_Rounds            : constant Boolean := True;
+   OpenVMS                   : constant Boolean := False;
+   Preallocated_Stacks       : constant Boolean := False;
+   Signed_Zeros              : constant Boolean := True;
+   Stack_Check_Default       : constant Boolean := False;
+   Stack_Check_Probes        : constant Boolean := False;
+   Support_64_Bit_Divides    : constant Boolean := True;
+   Support_Aggregates        : constant Boolean := True;
+   Support_Composite_Assign  : constant Boolean := True;
+   Support_Composite_Compare : constant Boolean := True;
+   Support_Long_Shifts       : constant Boolean := True;
+   Suppress_Standard_Library : constant Boolean := False;
+   Use_Ada_Main_Program_Name : constant Boolean := False;
+   ZCX_By_Default            : constant Boolean := True;
+   GCC_ZCX_Support           : constant Boolean := True;
+   Front_End_ZCX_Support     : constant Boolean := False;
+
+   --  Obsolete entries, to be removed eventually (bootstrap issues!)
+
+   High_Integrity_Mode       : constant Boolean := False;
+   Long_Shifts_Inlined       : constant Boolean := False;
+
+end System;
--- /dev/null	2005-03-26 22:51:43.000000000 -0500
+++ s-osinte-linux-hppa.ads	2005-04-05 21:47:35.000000000 -0400
@@ -0,0 +1,533 @@
+------------------------------------------------------------------------------
+--                                                                          --
+--                GNU ADA RUN-TIME LIBRARY (GNARL) COMPONENTS               --
+--                                                                          --
+--                   S Y S T E M . O S _ I N T E R F A C E                  --
+--                                                                          --
+--                                  S p e c                                 --
+--                          (GNU/Linux-HPPA Version)                        --
+--                                                                          --
+--             Copyright (C) 1991-1994, Florida State University            --
+--             Copyright (C) 1995-2005, Free Software Foundation, Inc.      --
+--                                                                          --
+-- GNARL is free software; you can  redistribute it  and/or modify it under --
+-- terms of the  GNU General Public License as published  by the Free Soft- --
+-- ware  Foundation;  either version 2,  or (at your option) any later ver- --
+-- sion. GNARL is distributed in the hope that it will be useful, but WITH- --
+-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
+-- or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License --
+-- for  more details.  You should have  received  a copy of the GNU General --
+-- Public License  distributed with GNARL; see file COPYING.  If not, write --
+-- to  the Free Software Foundation,  59 Temple Place - Suite 330,  Boston, --
+-- MA 02111-1307, USA.                                                      --
+--                                                                          --
+-- As a special exception,  if other files  instantiate  generics from this --
+-- unit, or you link  this unit with other files  to produce an executable, --
+-- this  unit  does not  by itself cause  the resulting  executable  to  be --
+-- covered  by the  GNU  General  Public  License.  This exception does not --
+-- however invalidate  any other reasons why  the executable file  might be --
+-- covered by the  GNU Public License.                                      --
+--                                                                          --
+-- GNARL was developed by the GNARL team at Florida State University.       --
+-- Extensive contributions were provided by Ada Core Technologies, Inc.     --
+--                                                                          --
+------------------------------------------------------------------------------
+
+--  This is a GNU/Linux (GNU/LinuxThreads) version of this package
+
+--  This package encapsulates all direct interfaces to OS services
+--  that are needed by children of System.
+
+--  PLEASE DO NOT add any with-clauses to this package or remove the pragma
+--  Preelaborate. This package is designed to be a bottom-level (leaf) package.
+
+with Interfaces.C;
+with Unchecked_Conversion;
+
+package System.OS_Interface is
+   pragma Preelaborate;
+
+   pragma Linker_Options ("-lpthread");
+
+   subtype int            is Interfaces.C.int;
+   subtype char           is Interfaces.C.char;
+   subtype short          is Interfaces.C.short;
+   subtype long           is Interfaces.C.long;
+   subtype unsigned       is Interfaces.C.unsigned;
+   subtype unsigned_short is Interfaces.C.unsigned_short;
+   subtype unsigned_long  is Interfaces.C.unsigned_long;
+   subtype unsigned_char  is Interfaces.C.unsigned_char;
+   subtype plain_char     is Interfaces.C.plain_char;
+   subtype size_t         is Interfaces.C.size_t;
+
+   -----------
+   -- Errno --
+   -----------
+
+   function errno return int;
+   pragma Import (C, errno, "__get_errno");
+
+   EAGAIN    : constant := 11;
+   EINTR     : constant := 4;
+   EINVAL    : constant := 22;
+   ENOMEM    : constant := 12;
+   EPERM     : constant := 1;
+   ETIMEDOUT : constant := 238;
+
+   -------------
+   -- Signals --
+   -------------
+
+   Max_Interrupt : constant := 63;
+   type Signal is new int range 0 .. Max_Interrupt;
+   for Signal'Size use int'Size;
+
+   SIGHUP     : constant := 1; --  hangup
+   SIGINT     : constant := 2; --  interrupt (rubout)
+   SIGQUIT    : constant := 3; --  quit (ASCD FS)
+   SIGILL     : constant := 4; --  illegal instruction (not reset)
+   SIGTRAP    : constant := 5; --  trace trap (not reset)
+   SIGIOT     : constant := 6; --  IOT instruction
+   SIGABRT    : constant := 6; --  used by abort, replace SIGIOT in the  future
+   SIGEMT     : constant := 7; --  EMT
+   SIGFPE     : constant := 8; --  floating point exception
+   SIGKILL    : constant := 9; --  kill (cannot be caught or ignored)
+   SIGBUS     : constant := 10; --  bus error
+   SIGSEGV    : constant := 11; --  segmentation violation
+   SIGSYS     : constant := 12; --  bad system call
+   SIGPIPE    : constant := 13; --  write on a pipe with no one to read it
+   SIGALRM    : constant := 14; --  alarm clock
+   SIGTERM    : constant := 15; --  software termination signal from kill
+   SIGUSR1    : constant := 16; --  user defined signal 1
+   SIGUSR2    : constant := 17; --  user defined signal 2
+   SIGCLD     : constant := 18; --  alias for SIGCHLD
+   SIGCHLD    : constant := 18; --  child status change
+   SIGPWR     : constant := 19; --  power-fail restart
+   SIGVTALRM  : constant := 20; --  virtual timer expired
+   SIGPROF    : constant := 21; --  profiling timer expired
+   SIGPOLL    : constant := 22; --  pollable event occurred
+   SIGIO      : constant := 22; --  I/O now possible (4.2 BSD)
+   SIGWINCH   : constant := 23; --  window size change
+   SIGSTOP    : constant := 24; --  stop (cannot be caught or ignored)
+   SIGTSTP    : constant := 25; --  user stop requested from tty
+   SIGCONT    : constant := 26; --  stopped process has been continued
+   SIGTTIN    : constant := 27; --  background tty read attempted
+   SIGTTOU    : constant := 28; --  background tty write attempted
+   SIGURG     : constant := 29; --  urgent condition on IO channel
+   SIGLOST    : constant := 30; --  File lock lost
+   SIGUNUSED  : constant := 31; --  unused signal (GNU/Linux)
+   SIGXCPU    : constant := 33; --  CPU time limit exceeded
+   SIGXFSZ    : constant := 34; --  filesize limit exceeded
+   SIGSTKFLT  : constant := 36; --  coprocessor stack fault (Linux)
+   SIGLTHRRES : constant := 37; --  GNU/LinuxThreads restart signal
+   SIGLTHRCAN : constant := 38; --  GNU/LinuxThreads cancel signal
+   SIGLTHRDBG : constant := 39; --  GNU/LinuxThreads debugger signal
+
+   SIGADAABORT : constant := SIGABRT;
+   --  Change this if you want to use another signal for task abort.
+   --  SIGTERM might be a good one.
+
+   type Signal_Set is array (Natural range <>) of Signal;
+
+   Unmasked    : constant Signal_Set := (
+      SIGTRAP,
+      --  To enable debugging on multithreaded applications, mark SIGTRAP to
+      --  be kept unmasked.
+
+      SIGBUS,
+
+      SIGTTIN, SIGTTOU, SIGTSTP,
+      --  Keep these three signals unmasked so that background processes
+      --  and IO behaves as normal "C" applications
+
+      SIGPROF,
+      --  To avoid confusing the profiler
+
+      SIGKILL, SIGSTOP,
+      --  These two signals actually cannot be masked;
+      --  POSIX simply won't allow it.
+
+      SIGLTHRRES, SIGLTHRCAN, SIGLTHRDBG);
+      --  These three signals are used by GNU/LinuxThreads starting from
+      --  glibc 2.1 (future 2.2).
+
+   Reserved    : constant Signal_Set :=
+   --  I am not sure why the following two signals are reserved.
+   --  I guess they are not supported by this version of GNU/Linux.
+     (SIGVTALRM, SIGUNUSED);
+
+   type sigset_t is private;
+
+   function sigaddset (set : access sigset_t; sig : Signal) return int;
+   pragma Import (C, sigaddset, "sigaddset");
+
+   function sigdelset (set : access sigset_t; sig : Signal) return int;
+   pragma Import (C, sigdelset, "sigdelset");
+
+   function sigfillset (set : access sigset_t) return int;
+   pragma Import (C, sigfillset, "sigfillset");
+
+   function sigismember (set : access sigset_t; sig : Signal) return int;
+   pragma Import (C, sigismember, "sigismember");
+
+   function sigemptyset (set : access sigset_t) return int;
+   pragma Import (C, sigemptyset, "sigemptyset");
+
+   type union_type_3 is new String (1 .. 116);
+   type siginfo_t is record
+      si_signo : int;
+      si_code  : int;
+      si_errno : int;
+      X_data   : union_type_3;
+   end record;
+   pragma Convention (C, siginfo_t);
+
+   type struct_sigaction is record
+      sa_handler   : System.Address;
+      sa_flags     : unsigned_long;
+      sa_mask      : sigset_t;
+   end record;
+   pragma Convention (C, struct_sigaction);
+   type struct_sigaction_ptr is access all struct_sigaction;
+
+   type Machine_State is record
+      eip : unsigned_long;
+      ebx : unsigned_long;
+      esp : unsigned_long;
+      ebp : unsigned_long;
+      esi : unsigned_long;
+      edi : unsigned_long;
+   end record;
+   type Machine_State_Ptr is access all Machine_State;
+
+   SA_SIGINFO  : constant := 16;
+
+   SIG_BLOCK   : constant := 0;
+   SIG_UNBLOCK : constant := 1;
+   SIG_SETMASK : constant := 2;
+
+   SIG_DFL : constant := 0;
+   SIG_IGN : constant := 1;
+
+   function sigaction
+     (sig  : Signal;
+      act  : struct_sigaction_ptr;
+      oact : struct_sigaction_ptr) return int;
+   pragma Import (C, sigaction, "sigaction");
+
+   ----------
+   -- Time --
+   ----------
+
+   type timespec is private;
+
+   function To_Duration (TS : timespec) return Duration;
+   pragma Inline (To_Duration);
+
+   function To_Timespec (D : Duration) return timespec;
+   pragma Inline (To_Timespec);
+
+   type struct_timeval is private;
+
+   function To_Duration (TV : struct_timeval) return Duration;
+   pragma Inline (To_Duration);
+
+   function To_Timeval (D : Duration) return struct_timeval;
+   pragma Inline (To_Timeval);
+
+   function gettimeofday
+     (tv : access struct_timeval;
+      tz : System.Address := System.Null_Address) return int;
+   pragma Import (C, gettimeofday, "gettimeofday");
+
+   function sysconf (name : int) return long;
+   pragma Import (C, sysconf);
+
+   SC_CLK_TCK : constant := 2;
+
+   -------------------------
+   -- Priority Scheduling --
+   -------------------------
+
+   SCHED_OTHER : constant := 0;
+   SCHED_FIFO  : constant := 1;
+   SCHED_RR    : constant := 2;
+
+   -------------
+   -- Process --
+   -------------
+
+   type pid_t is private;
+
+   function kill (pid : pid_t; sig : Signal) return int;
+   pragma Import (C, kill, "kill");
+
+   function getpid return pid_t;
+   pragma Import (C, getpid, "getpid");
+
+   -------------
+   -- Threads --
+   -------------
+
+   type Thread_Body is access
+     function (arg : System.Address) return System.Address;
+
+   function Thread_Body_Access is new
+     Unchecked_Conversion (System.Address, Thread_Body);
+
+   type pthread_t is new unsigned_long;
+   subtype Thread_Id        is pthread_t;
+
+   function To_pthread_t is new Unchecked_Conversion
+     (unsigned_long, pthread_t);
+
+   type pthread_mutex_t     is limited private;
+   type pthread_cond_t      is limited private;
+   type pthread_attr_t      is limited private;
+   type pthread_mutexattr_t is limited private;
+   type pthread_condattr_t  is limited private;
+   type pthread_key_t       is private;
+
+   PTHREAD_CREATE_DETACHED : constant := 1;
+
+   -----------
+   -- Stack --
+   -----------
+
+   function Get_Stack_Base (thread : pthread_t) return Address;
+   pragma Inline (Get_Stack_Base);
+   --  This is a dummy procedure to share some GNULLI files
+
+   ---------------------------------------
+   -- Nonstandard Thread Initialization --
+   ---------------------------------------
+
+   procedure pthread_init;
+   pragma Inline (pthread_init);
+   --  This is a dummy procedure to share some GNULLI files
+
+   -------------------------
+   -- POSIX.1c  Section 3 --
+   -------------------------
+
+   function sigwait (set : access sigset_t; sig : access Signal) return int;
+   pragma Import (C, sigwait, "sigwait");
+
+   function pthread_kill (thread : pthread_t; sig : Signal) return int;
+   pragma Import (C, pthread_kill, "pthread_kill");
+
+   type sigset_t_ptr is access all sigset_t;
+
+   function pthread_sigmask
+     (how  : int;
+      set  : sigset_t_ptr;
+      oset : sigset_t_ptr) return int;
+   pragma Import (C, pthread_sigmask, "pthread_sigmask");
+
+   --------------------------
+   -- POSIX.1c  Section 11 --
+   --------------------------
+
+   function pthread_mutexattr_init
+     (attr : access pthread_mutexattr_t) return int;
+   pragma Import (C, pthread_mutexattr_init, "pthread_mutexattr_init");
+
+   function pthread_mutexattr_destroy
+     (attr : access pthread_mutexattr_t) return int;
+   pragma Import (C, pthread_mutexattr_destroy, "pthread_mutexattr_destroy");
+
+   function pthread_mutex_init
+     (mutex : access pthread_mutex_t;
+      attr  : access pthread_mutexattr_t) return int;
+   pragma Import (C, pthread_mutex_init, "pthread_mutex_init");
+
+   function pthread_mutex_destroy (mutex : access pthread_mutex_t) return int;
+   pragma Import (C, pthread_mutex_destroy, "pthread_mutex_destroy");
+
+   function pthread_mutex_lock (mutex : access pthread_mutex_t) return int;
+   pragma Import (C, pthread_mutex_lock, "pthread_mutex_lock");
+
+   function pthread_mutex_unlock (mutex : access pthread_mutex_t) return int;
+   pragma Import (C, pthread_mutex_unlock, "pthread_mutex_unlock");
+
+   function pthread_condattr_init
+     (attr : access pthread_condattr_t) return int;
+   pragma Import (C, pthread_condattr_init, "pthread_condattr_init");
+
+   function pthread_condattr_destroy
+     (attr : access pthread_condattr_t) return int;
+   pragma Import (C, pthread_condattr_destroy, "pthread_condattr_destroy");
+
+   function pthread_cond_init
+     (cond : access pthread_cond_t;
+      attr : access pthread_condattr_t) return int;
+   pragma Import (C, pthread_cond_init, "pthread_cond_init");
+
+   function pthread_cond_destroy (cond : access pthread_cond_t) return int;
+   pragma Import (C, pthread_cond_destroy, "pthread_cond_destroy");
+
+   function pthread_cond_signal (cond : access pthread_cond_t) return int;
+   pragma Import (C, pthread_cond_signal, "pthread_cond_signal");
+
+   function pthread_cond_wait
+     (cond  : access pthread_cond_t;
+      mutex : access pthread_mutex_t) return int;
+   pragma Import (C, pthread_cond_wait, "pthread_cond_wait");
+
+   function pthread_cond_timedwait
+     (cond    : access pthread_cond_t;
+      mutex   : access pthread_mutex_t;
+      abstime : access timespec) return int;
+   pragma Import (C, pthread_cond_timedwait, "pthread_cond_timedwait");
+
+   --------------------------
+   -- POSIX.1c  Section 13 --
+   --------------------------
+
+   type struct_sched_param is record
+      sched_priority : int;  --  scheduling priority
+   end record;
+   pragma Convention (C, struct_sched_param);
+
+   function pthread_setschedparam
+     (thread : pthread_t;
+      policy : int;
+      param  : access struct_sched_param) return int;
+   pragma Import (C, pthread_setschedparam, "pthread_setschedparam");
+
+   function pthread_attr_setschedpolicy
+     (attr   : access pthread_attr_t;
+      policy : int) return int;
+   pragma Import
+     (C, pthread_attr_setschedpolicy, "pthread_attr_setschedpolicy");
+
+   function sched_yield return int;
+   pragma Import (C, sched_yield, "sched_yield");
+
+   ---------------------------
+   -- P1003.1c - Section 16 --
+   ---------------------------
+
+   function pthread_attr_init
+     (attributes : access pthread_attr_t) return int;
+   pragma Import (C, pthread_attr_init, "pthread_attr_init");
+
+   function pthread_attr_destroy
+     (attributes : access pthread_attr_t) return int;
+   pragma Import (C, pthread_attr_destroy, "pthread_attr_destroy");
+
+   function pthread_attr_setdetachstate
+     (attr        : access pthread_attr_t;
+      detachstate : int) return int;
+   pragma Import
+     (C, pthread_attr_setdetachstate, "pthread_attr_setdetachstate");
+
+   function pthread_attr_setstacksize
+     (attr      : access pthread_attr_t;
+      stacksize : size_t) return int;
+   pragma Import (C, pthread_attr_setstacksize, "pthread_attr_setstacksize");
+
+   function pthread_create
+     (thread        : access pthread_t;
+      attributes    : access pthread_attr_t;
+      start_routine : Thread_Body;
+      arg           : System.Address) return int;
+   pragma Import (C, pthread_create, "pthread_create");
+
+   procedure pthread_exit (status : System.Address);
+   pragma Import (C, pthread_exit, "pthread_exit");
+
+   function pthread_self return pthread_t;
+   pragma Import (C, pthread_self, "pthread_self");
+
+   --------------------------
+   -- POSIX.1c  Section 17 --
+   --------------------------
+
+   function pthread_setspecific
+     (key   : pthread_key_t;
+      value : System.Address) return int;
+   pragma Import (C, pthread_setspecific, "pthread_setspecific");
+
+   function pthread_getspecific (key : pthread_key_t) return System.Address;
+   pragma Import (C, pthread_getspecific, "pthread_getspecific");
+
+   type destructor_pointer is access procedure (arg : System.Address);
+
+   function pthread_key_create
+     (key        : access pthread_key_t;
+      destructor : destructor_pointer) return int;
+   pragma Import (C, pthread_key_create, "pthread_key_create");
+
+private
+
+   type sigset_t is array (0 .. 31) of unsigned_long;
+   pragma Convention (C, sigset_t);
+
+   type pid_t is new int;
+
+   type time_t is new long;
+
+   type timespec is record
+      tv_sec  : time_t;
+      tv_nsec : long;
+   end record;
+   pragma Convention (C, timespec);
+
+   type struct_timeval is record
+      tv_sec  : time_t;
+      tv_usec : time_t;
+   end record;
+   pragma Convention (C, struct_timeval);
+
+   type pthread_attr_t is record
+      detachstate   : int;
+      schedpolicy   : int;
+      schedparam    : struct_sched_param;
+      inheritsched  : int;
+      scope         : int;
+      guardsize     : size_t;
+      stackaddr_set : int;
+      stackaddr     : System.Address;
+      stacksize     : size_t;
+   end record;
+   pragma Convention (C, pthread_attr_t);
+
+   type pthread_condattr_t is record
+      dummy : int;
+   end record;
+   pragma Convention (C, pthread_condattr_t);
+
+   type pthread_mutexattr_t is record
+      mutexkind : int;
+   end record;
+   pragma Convention (C, pthread_mutexattr_t);
+
+   type lock_array is array (1 .. 4) of int;
+   type atomic_lock_t is record
+      lock : lock_array;
+   end record;
+   pragma Convention (C, atomic_lock_t);
+   for atomic_lock_t'Alignment use 8 * 16;
+
+   type struct_pthread_fast_lock is record
+      spinlock : atomic_lock_t;
+      status   : long;
+   end record;
+   pragma Convention (C, struct_pthread_fast_lock);
+
+   type pthread_mutex_t is record
+      m_reserved : int;
+      m_count    : int;
+      m_owner    : System.Address;
+      m_kind     : int;
+      m_lock     : struct_pthread_fast_lock;
+   end record;
+   pragma Convention (C, pthread_mutex_t);
+
+   type pthread_cond_t is array (0 .. 47) of unsigned_char;
+   pragma Convention (C, pthread_cond_t);
+
+   type pthread_key_t is new unsigned;
+
+end System.OS_Interface;

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Arnaud Charlet]

> Here is take 2.  The changes from the previous version are all to the
> file s-osinte-linux-hppa.ads:

BTW, I missed the approval of this patch, could you point me to the
email approving this change ?

> 1) Definition of struct_sigaction corrected,
> 2) Definition of SA_SIGINFO corrected,
> 3) sigset_t changed to array of unsigned_long.

Could you explain why you changed sigset_t definition ?

Also, the alignment for atomic_lock_t seems wrong to me: you are using
8 * 16, but the alignment is specified in *bytes*, not bits (a usual
confusion), so this value seems very high to me. Didn't you mean 16
instead ?

Thanks for checking.

Also, there are really too many undesirable duplications between
s-osinte-linux*.ads files, which is a maintenance issue, so I'd rather
see a clean up in this area (such as moving target specific bits such as
signal numbers in a separate file).

Arno

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[John David Anglin]

> BTW, I missed the approval of this patch, could you point me to the
> email approving this change ?

<http://gcc.gnu.org/ml/gcc-patches/2005-04/msg00789.html>.

I'll try to reply to your other questions next week.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Arnaud Charlet]

> > BTW, I missed the approval of this patch, could you point me to the
> > email approving this change ?
> 
> <http://gcc.gnu.org/ml/gcc-patches/2005-04/msg00789.html>.

Well, that's not a very clear OK, since Geert was referring to the
system-hpux.ads patch only as far as I know, and not the tasking
specific part ;-)

Anyway, let's now sort what is checked in: fix the obvious errors,
and later address the unfortunate code duplication that has happened
now twice recently (for alpha-linux and hppa-linux).

Also, I haven't fully reviewed the other bits of your patch,
so there might be some other issues, to be double checked.

Arno

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[John David Anglin]

> Anyway, let's now sort what is checked in: fix the obvious errors,
> and later address the unfortunate code duplication that has happened
> now twice recently (for alpha-linux and hppa-linux).
> 
> Also, I haven't fully reviewed the other bits of your patch,
> so there might be some other issues, to be double checked.

Ok.  I'll try to get to this as soon as possible.  My DSL modem
failed this week and I'm waiting for a replacement.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Richard Henderson]

On Fri, Apr 29, 2005 at 04:44:05PM +0200, Arnaud Charlet wrote:
> Anyway, let's now sort what is checked in: fix the obvious errors,
> and later address the unfortunate code duplication that has happened
> now twice recently (for alpha-linux and hppa-linux).

One way to fix all of this would be to move libada out to the top level,
and use configure and/or generator programs that actually probe the
contents of /usr/include for the data.

Personally I don't think any other solution is in fact a solution.


r~

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Mark Mitchell]

Richard Henderson wrote:
> On Fri, Apr 29, 2005 at 04:44:05PM +0200, Arnaud Charlet wrote:
> 
>>Anyway, let's now sort what is checked in: fix the obvious errors,
>>and later address the unfortunate code duplication that has happened
>>now twice recently (for alpha-linux and hppa-linux).
> 
> 
> One way to fix all of this would be to move libada out to the top level,
> and use configure and/or generator programs that actually probe the
> contents of /usr/include for the data.
> 
> Personally I don't think any other solution is in fact a solution.

I agree.  Ada should handle its runtime library just like the other 
languages handle theirs.

-- 
Mark Mitchell
CodeSourcery, LLC
mark@codesourcery.com
(916) 791-8304

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Florian Weimer]

* Mark Mitchell:

>> One way to fix all of this would be to move libada out to the top
>> level, and use configure and/or generator programs that actually
>> probe the contents of /usr/include for the data.  Personally I
>> don't think any other solution is in fact a solution.
>
> I agree.  Ada should handle its runtime library just like the other 
> languages handle theirs.

Would it be acceptable to add a switch to the C front end to cause it
to dump the layout of struct definitions?  This would simplify things
enormously.  We could implement it without this feature, especially
for well-defined structs whose fields are known (but not their order
and sizes), but it's not very efficient when cross-compiling.

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Mark Mitchell]

Florian Weimer wrote:
> * Mark Mitchell:
> 
> 
>>>One way to fix all of this would be to move libada out to the top
>>>level, and use configure and/or generator programs that actually
>>>probe the contents of /usr/include for the data.  Personally I
>>>don't think any other solution is in fact a solution.
>>
>>I agree.  Ada should handle its runtime library just like the other 
>>languages handle theirs.
> 
> 
> Would it be acceptable to add a switch to the C front end to cause it
> to dump the layout of struct definitions?  This would simplify things
> enormously.  We could implement it without this feature, especially
> for well-defined structs whose fields are known (but not their order
> and sizes), but it's not very efficient when cross-compiling.

Yes, but even better would be to add a switch that works in a 
language-independent manner.

-- 
Mark Mitchell
CodeSourcery, LLC
mark@codesourcery.com
(916) 791-8304

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[John David Anglin]

> > 3) sigset_t changed to array of unsigned_long.
> 
> Could you explain why you changed sigset_t definition ?

From bits/sigset.h:

# define _SIGSET_NWORDS (1024 / (8 * sizeof (unsigned long int)))
typedef struct
  {
      unsigned long int __val[_SIGSET_NWORDS];
  } __sigset_t;

> Also, the alignment for atomic_lock_t seems wrong to me: you are using
> 8 * 16, but the alignment is specified in *bytes*, not bits (a usual
> confusion), so this value seems very high to me. Didn't you mean 16
> instead ?

The required alignment is 16 bytes.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Arnaud Charlet]

> > > 3) sigset_t changed to array of unsigned_long.
> > 
> > Could you explain why you changed sigset_t definition ?
> 
> >From bits/sigset.h:
> 
> # define _SIGSET_NWORDS (1024 / (8 * sizeof (unsigned long int)))
> typedef struct
>   {
>       unsigned long int __val[_SIGSET_NWORDS];
>   } __sigset_t;

I understand that, but the previous code used an array of bytes explicitely
to share code between 32 and 64 bit platforms where typically Long_Integer'Size
is different. So unless the underlying structure/alignment is different,
I would stick to the previous definition.

You can check the size and alignment used by compiling the file with -gnatR3

> > Also, the alignment for atomic_lock_t seems wrong to me: you are using
> > 8 * 16, but the alignment is specified in *bytes*, not bits (a usual
> > confusion), so this value seems very high to me. Didn't you mean 16
> > instead ?
> 
> The required alignment is 16 bytes.

So the alignment in the file is indeed wrong and should be 16 rather than
8 * 16

Arno

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[John David Anglin]

> > > Could you explain why you changed sigset_t definition ?
> > 
> > >From bits/sigset.h:
> > 
> > # define _SIGSET_NWORDS (1024 / (8 * sizeof (unsigned long int)))
> > typedef struct
> >   {
> >       unsigned long int __val[_SIGSET_NWORDS];
> >   } __sigset_t;
> 
> I understand that, but the previous code used an array of bytes explicitely
> to share code between 32 and 64 bit platforms where typically Long_Integer'Size
> is different. So unless the underlying structure/alignment is different,
> I would stick to the previous definition.

One of the reasons that I changed the definition is the PA is big
endian.  So, the bit masks won't work using bytes unless this is
taken into account.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Arnaud Charlet]

> One of the reasons that I changed the definition is the PA is big
> endian.  So, the bit masks won't work using bytes unless this is
> taken into account.

The sigset_t type is private on the Ada side, so there cannot be
bit masks done, this type is only used through function calls to C.

In other words, it's an opaque type as far as Ada is concerned.

Arno

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[John David Anglin]

> > One of the reasons that I changed the definition is the PA is big
> > endian.  So, the bit masks won't work using bytes unless this is
> > taken into account.
> 
> The sigset_t type is private on the Ada side, so there cannot be
> bit masks done, this type is only used through function calls to C.

Then the details of the Ada definition don't matter as long as the
size and alignment are correct.  Although a 64-bit hppa-linux runtime
doesn't exist yet, we are still stuck with the unsigned long int
type for the __val field.  The alignment requirement for longs has
to be different in the 32 and 64-bit runtimes because of the strict
alignment requirements of the parisc architecture.

Thus, I would prefer to leave the Ada define as is.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Arnaud Charlet]

> Then the details of the Ada definition don't matter as long as the
> size and alignment are correct.

Exactly. What matters is writing this definition so that it can,
as much as possible, be used on all linux platforms, hence my comments.

Arno

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[John David Anglin]

> > Then the details of the Ada definition don't matter as long as the
> > size and alignment are correct.
> 
> Exactly. What matters is writing this definition so that it can,
> as much as possible, be used on all linux platforms, hence my comments.

The definition in s-osinte-linux.ads would need to be modified to provide
4 and 8 byte alignment for the 32 and 64-bit hppa runtimes.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Arnaud Charlet]

> The definition in s-osinte-linux.ads would need to be modified to provide
> 4 and 8 byte alignment for the 32 and 64-bit hppa runtimes.

It could then simply use Min (8, Standard'Maximum_Alignment) everywhere.

Arno

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[John David Anglin]

> You can check the size and alignment used by compiling the file with -gnatR3

It shows the wrong alignment.

> > > Also, the alignment for atomic_lock_t seems wrong to me: you are using
> > > 8 * 16, but the alignment is specified in *bytes*, not bits (a usual
> > > confusion), so this value seems very high to me. Didn't you mean 16
> > > instead ?
> > 
> > The required alignment is 16 bytes.
> 
> So the alignment in the file is indeed wrong and should be 16 rather than
> 8 * 16

Reducing the alignment to 16 causes an number of testsuite regressions.
Free is being called with a bad pointer.  Here is an example:

Program received signal SIGSEGV, Segmentation fault.
0x409b979c in __libc_free (mem=0x67d60) at malloc.c:3348
3348      ar_ptr = arena_for_chunk(p);
(gdb) bt
#0  0x409b979c in __libc_free (mem=0x67d60) at malloc.c:3348
#1  0x0001da90 in <__gnat_free> (ptr=425312) at s-memory.adb:113
#2  0x0001f6f0 in system.task_primitives.operations.finalize_tcb (t=0x67d60)
    at s-taprop.adb:907
#3  0x0003284c in system.tasking.stages.vulnerable_complete_master (self_id=Variable "self_id" is not available.
)
    at s-tassta.adb:1563
#4  0x00035d2c in c41306b () at c41306b.adb:39
#5  0x000155d4 in main (argc=1, argv=3220178412, envp=3220178420)
    at b~c41306b.adb:190

As far as I can tell, this region of memory was never allocated by
malloc but it's somehow a TCB being freed by 

Breakpoint 11, system.tasking.stages.vulnerable_complete_master (self_id=Variable "self_id" is not available.
)
    at s-tassta.adb:1563
1563                Vulnerable_Free_Task (T);
(gdb) p/x T
$93 = 0x67d60

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Arnaud Charlet]

> > You can check the size and alignment used by compiling the file with -gnatR3
> 
> It shows the wrong alignment.

Meaning ?

> Reducing the alignment to 16 causes an number of testsuite regressions.
> Free is being called with a bad pointer.  Here is an example:

Well, that seems to be an unrelated bug that is being hidden by setting
a huge alignment, don't you think ?

Arno

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[John David Anglin]

> > Reducing the alignment to 16 causes an number of testsuite regressions.
> > Free is being called with a bad pointer.  Here is an example:
> 
> Well, that seems to be an unrelated bug that is being hidden by setting
> a huge alignment, don't you think ?

At this point, I'm not sure it's unrelated.  The bug may be a locking
issue somehow affected by the alignment.  When debugging, there was a
point where a certain set of breaks would allow successful execution
of the test.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch] Add Ada tasking support for hppa-unknown-linux-gnu (take 2)

[Arnaud Charlet]

> > Well, that seems to be an unrelated bug that is being hidden by setting
> > a huge alignment, don't you think ?
> 
> At this point, I'm not sure it's unrelated.  The bug may be a locking
> issue somehow affected by the alignment.  When debugging, there was a
> point where a certain set of breaks would allow successful execution
> of the test.

In this case, it would mean that e.g. the alignment is greater than 16 bytes,
although this seems surprising that a C library would require a bigger
alignment.

Arno

Re: [patch]: Fix PR testsuite/23239

[John David Anglin]

> Your investigation got me curious as to why ASM_PN_FORMAT is defined
> in pa.h.  At the moment, it's not at all clear why the default in
> defaults.h isn't usable.  Dots and dollars are allowed in labels.

Answering my own question, I find that gdb confuses private names
using the dot format with struct fields.  Possibly, this is stabs
specific.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: fix post-weakref gthr-*.h on HP-UX (and others?)

[John David Anglin]

> > Index: gcc/ChangeLog
> > from  Alexandre Oliva  <aoliva@redhat.com>
> > 
> > 	PR other/24829

Actually, I've found that the patch doesn't completely fix PR 24829
on hppa64-hp-hpux11.11.  We still have the issue that we now need to
link against libpthread to resolve the pthread references introduced
by the original change adding weakref support to these files.

Executing on host: /test/gnu/gcc-3.3/objdir/gcc/xgcc -B/test/gnu/gcc-3.3/objdir/
gcc/ /test/gnu/gcc-3.3/gcc-4.1/gcc/testsuite/objc.dg/bitfield-1.m    -I/test/gnu
/gcc-3.3/gcc-4.1/gcc/testsuite/../../libobjc -L/test/gnu/gcc-3.3/objdir/hppa64-h
p-hpux11.11/./libobjc/.libs  -lobjc -lm   -o ./bitfield-1.exe    (timeout = 300)
ld: (Warning) Unsatisfied symbol "pthread_create" in file /test/gnu/gcc-3.3/objd
ir/hppa64-hp-hpux11.11/./libobjc/.libs/libobjc.sl
ld: (Warning) Unsatisfied symbol "pthread_attr_init" in file /test/gnu/gcc-3.3/o
bjdir/hppa64-hp-hpux11.11/./libobjc/.libs/libobjc.sl
2 warnings.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

[PING * 2] One line patch

[John David Anglin]

> http://gcc.gnu.org/ml/gcc-patches/2005-12/msg00820.html

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [committed] Fix PR target/20754: ACATS cxg1005 fails at runtime on hppa-linux

[John David Anglin]

> 2006-01-10  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
> 
> 	PR target/20754

I've applied the following patch to fix a regression in code generation
caused by the fix for PR 20754.  The register allocator was too often
choosing a floating-point register instead of a general register when
a general register.

Tested on hppa2.0w-hp-hpux11.11.  Committed to 4.0 through to trunk.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2006-01-16  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* pa.md: Disparage copies between general and floating-point registers
	in 32-bit move patterns.

Index: config/pa/pa.md
===================================================================
--- config/pa/pa.md	(revision 109740)
+++ config/pa/pa.md	(working copy)
@@ -2307,9 +2307,9 @@
 
 (define_insn ""
   [(set (match_operand:SI 0 "move_dest_operand"
-			  "=r,r,r,r,r,r,Q,!*q,!r,!*f,*f,T,r,f")
+			  "=r,r,r,r,r,r,Q,!*q,!r,!*f,*f,T,!r,!f")
 	(match_operand:SI 1 "move_src_operand"
-			  "A,r,J,N,K,RQ,rM,!rM,!*q,!*fM,RT,*f,f,r"))]
+			  "A,r,J,N,K,RQ,rM,!rM,!*q,!*fM,RT,*f,!f,!r"))]
   "(register_operand (operands[0], SImode)
     || reg_or_0_operand (operands[1], SImode))
    && !TARGET_SOFT_FLOAT
@@ -3869,9 +3869,9 @@
 
 (define_insn ""
   [(set (match_operand:DF 0 "move_dest_operand"
-			  "=f,*r,Q,?o,?Q,f,*r,*r,r,f")
+			  "=f,*r,Q,?o,?Q,f,*r,*r,!r,!f")
 	(match_operand:DF 1 "reg_or_0_or_nonsymb_mem_operand"
-			  "fG,*rG,f,*r,*r,RQ,o,RQ,f,r"))]
+			  "fG,*rG,f,*r,*r,RQ,o,RQ,!f,!r"))]
   "(register_operand (operands[0], DFmode)
     || reg_or_0_operand (operands[1], DFmode))
    && !(GET_CODE (operands[1]) == CONST_DOUBLE
@@ -4043,9 +4043,9 @@
 
 (define_insn ""
   [(set (match_operand:DF 0 "move_dest_operand"
-			  "=r,?o,?Q,r,r,r,f")
+			  "=r,?o,?Q,r,r,!r,!f")
 	(match_operand:DF 1 "reg_or_0_or_nonsymb_mem_operand"
-			  "rG,r,r,o,RQ,f,r"))]
+			  "rG,r,r,o,RQ,!f,!r"))]
   "(register_operand (operands[0], DFmode)
     || reg_or_0_operand (operands[1], DFmode))
    && !TARGET_64BIT
@@ -4185,9 +4185,9 @@
 
 (define_insn ""
   [(set (match_operand:DI 0 "move_dest_operand"
-			  "=r,o,Q,r,r,r,*f,*f,T,r,f")
+			  "=r,o,Q,r,r,r,*f,*f,T,!r,!f")
 	(match_operand:DI 1 "general_operand"
-			  "rM,r,r,o*R,Q,i,*fM,RT,*f,f,r"))]
+			  "rM,r,r,o*R,Q,i,*fM,RT,*f,!f,!r"))]
   "(register_operand (operands[0], DImode)
     || reg_or_0_operand (operands[1], DImode))
    && !TARGET_64BIT
@@ -4414,9 +4414,9 @@
 
 (define_insn ""
   [(set (match_operand:SF 0 "move_dest_operand"
-			  "=f,!*r,f,*r,Q,Q,r,f")
+			  "=f,!*r,f,*r,Q,Q,!r,!f")
 	(match_operand:SF 1 "reg_or_0_or_nonsymb_mem_operand"
-			  "fG,!*rG,RQ,RQ,f,*rG,f,r"))]
+			  "fG,!*rG,RQ,RQ,f,*rG,!f,!r"))]
   "(register_operand (operands[0], SFmode)
     || reg_or_0_operand (operands[1], SFmode))
    && !TARGET_SOFT_FLOAT

Re: [committed] Fix PR target/25926: A87B59A SIGABRT

[John David Anglin]

> The attached change fixes PR target/25926.  As noted in the PR, __main ()
> now needs to be called when using Ada on HP-UX 10 to initialize the EH tables,
> as is done for C and C++.
> 
> Tested on hppa1.1-hp-hpux10.20:
> http://gcc.gnu.org/ml/gcc-testresults/2006-02/msg00150.html.

The previous change failed on hpux11.  The "ifeq" didn't work.

I've reworked the change using separate t- and x- files for hpux10
and hpux11.  I did some rearrangement of rules and defines, placing
common hpux defines and rules in t-pa-hpux.  t-pa is nolonger used
on hpux, so I removed the quadlib.c rule that is only needed for
hpux.

Tested on hppa64-hp-hpux11.11, hppa2.0w-hp-hpux11.11 and
hppa-unknown-linux-gnu.  Test in progress on hppa1.1-hp-hpux10.20.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2006-02-05  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* pa/x-ada-hpux10, pa/t-pa-hpux10, pa/t-pa-hpux11: New files.
	* config.gcc (hppa[12]*-*-hpux10*): Use pa/t-pa-hpux10 instead of
	pa/t-pa.
	* config.gcc (hppa[12]*-*-hpux11*): Use pa/t-pa-hpux11 instead of
	pa/t-pa.
	* config.host (hppa*-*-hpux10*): Use pa/x-ada-hpux10 instead of
	pa/x-ada.
	* pa/t-pa-hpux: Add lib2funcs.asm and quadlib.c rules.
	* pa/t-pa64: Delete quadlib.c rule.
	* pa/x-ada: Revert last change.
	* pa/t-pa: Revert last change.  Delete quadlib.c rule.

--- /dev/null	Sat Feb  4 17:27:15 2006
+++ config/pa/x-ada-hpux10	Sat Feb  4 17:08:11 2006
@@ -0,0 +1,4 @@
+# The ada virtual array implementation requires that indexing be disabled on
+# hosts such as hpux that use a segmented memory architecture.  Both the c
+# and ada files need to be compiled with this option for correct operation.
+X_ADA_CFLAGS = -mdisable-indexing -D_X_HPUX10
--- /dev/null	Sat Feb  4 17:27:15 2006
+++ config/pa/t-pa-hpux10	Sat Feb  4 17:29:22 2006
@@ -0,0 +1,2 @@
+TARGET_LIBGCC2_CFLAGS = -fPIC -D_T_HPUX10
+LIB2FUNCS_EXTRA=lib2funcs.asm quadlib.c
--- /dev/null	Sat Feb  4 17:27:15 2006
+++ config/pa/t-pa-hpux11	Sat Feb  4 17:29:35 2006
@@ -0,0 +1,2 @@
+TARGET_LIBGCC2_CFLAGS = -fPIC
+LIB2FUNCS_EXTRA=lib2funcs.asm quadlib.c
Index: config.gcc
===================================================================
--- config.gcc	(revision 110593)
+++ config.gcc	(working copy)
@@ -890,7 +890,7 @@
 		extra_options="${extra_options} pa/pa-hpux1010.opt"
 		;;
 	esac
-	tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
+	tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
 	case ${enable_threads} in
 	  "")
 	    if test x$have_pthread_h = xyes ; then
@@ -967,7 +967,7 @@
 		extra_options="${extra_options} pa/pa-hpux1111.opt"
 		;;
 	esac
-	tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
+	tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
 	# Set the libgcc version number
 	if test x$sjlj = x1; then
 	    tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
Index: config.host
===================================================================
--- config.host	(revision 110593)
+++ config.host	(working copy)
@@ -119,7 +119,10 @@
   hppa1.1-*-bsd*)
     host_xmake_file="pa/x-ada"
     ;;
-  hppa1.0-*-hpux10* | hppa1.1-*-hpux10* | hppa2*-*-hpux10* | \
+  hppa1.0-*-hpux10* | hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
+    out_host_hook_obj=host-hpux.o
+    host_xmake_file="pa/x-ada-hpux10 x-hpux"
+    ;;
   hppa1.0-*-hpux11* | hppa1.1-*-hpux11* | hppa2*-*-hpux11* | \
   hppa*64*-*-hpux11*)
     out_host_hook_obj=host-hpux.o
Index: config/pa/t-pa-hpux
===================================================================
--- config/pa/t-pa-hpux	(revision 110593)
+++ config/pa/t-pa-hpux	(working copy)
@@ -1,2 +1,10 @@
 # So putenv and other functions get seen by fixproto.
 FIXPROTO_DEFINES = -D_HPUX_SOURCE -D_HIUX_SOURCE
+
+lib2funcs.asm: $(srcdir)/config/pa/lib2funcs.asm
+	rm -f lib2funcs.asm
+	cp $(srcdir)/config/pa/lib2funcs.asm .
+
+quadlib.c: $(srcdir)/config/pa/quadlib.c
+	rm -f quadlib.c
+	cp $(srcdir)/config/pa/quadlib.c .
Index: config/pa/t-pa64
===================================================================
--- config/pa/t-pa64	(revision 110593)
+++ config/pa/t-pa64	(working copy)
@@ -1,10 +1,2 @@
 TARGET_LIBGCC2_CFLAGS = -fPIC -Dpa64=1 -DELF=1 -mlong-calls
-
 LIB2FUNCS_EXTRA=quadlib.c
-
-# We'll need this once .init sections are enabled on PA64.
-#EXTRA_PARTS = crtbegin.o crtend.o
-
-quadlib.c: $(srcdir)/config/pa/quadlib.c
-	rm -f quadlib.c
-	cp $(srcdir)/config/pa/quadlib.c .
Index: config/pa/x-ada
===================================================================
--- config/pa/x-ada	(revision 110593)
+++ config/pa/x-ada	(working copy)
@@ -1,10 +1,4 @@
 # The ada virtual array implementation requires that indexing be disabled on
 # hosts such as hpux that use a segmented memory architecture.  Both the c
 # and ada files need to be compiled with this option for correct operation.
-# On HP-UX 10 hosts, we define _X_HPUX10 to cause __main () to be called at
-# startup.
-ifeq ($(strip $(filter-out hppa% hp hpux10%,$(targ))),)
-  X_ADA_CFLAGS = -mdisable-indexing -D_X_HPUX10
-else
-  X_ADA_CFLAGS = -mdisable-indexing
-endif
+X_ADA_CFLAGS=-mdisable-indexing
Index: config/pa/t-pa
===================================================================
--- config/pa/t-pa	(revision 110593)
+++ config/pa/t-pa	(working copy)
@@ -1,15 +1,7 @@
-LIB2FUNCS_EXTRA=lib2funcs.asm quadlib.c
+TARGET_LIBGCC2_CFLAGS = -fPIC
 
+LIB2FUNCS_EXTRA=lib2funcs.asm
+
 lib2funcs.asm: $(srcdir)/config/pa/lib2funcs.asm
 	rm -f lib2funcs.asm
 	cp $(srcdir)/config/pa/lib2funcs.asm .
-
-quadlib.c: $(srcdir)/config/pa/quadlib.c
-	rm -f quadlib.c
-	cp $(srcdir)/config/pa/quadlib.c .
-
-ifeq ($(strip $(filter-out hppa% hp hpux10%,$(targ))),)
-  TARGET_LIBGCC2_CFLAGS = -fPIC -D_T_HPUX10
-else
-  TARGET_LIBGCC2_CFLAGS = -fPIC
-endif

Ping: [PATCH] Limit precision of *bitsizetypes types

[John David Anglin]

Small patch to stor-layout.c:
<http://gcc.gnu.org/ml/gcc-patches/2006-10/msg01522.html>.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Ping: [PATCH] Limit precision of *bitsizetypes types

[Roger Sayle]

On Sat, 18 Nov 2006, John David Anglin wrote:
> Small patch to stor-layout.c:
> <http://gcc.gnu.org/ml/gcc-patches/2006-10/msg01522.html>.

Sorry for the delay.  This is OK for mainline.
Thanks for fixing this.


Do you have any opinions on the use of nested MIN/MAX macros?  Whilst
as long as the arguments are side-effect free, we'll produce valid code,
it may result in significant (temporary) code duplication caused by
macro expansion.

Perhaps:

	precision = MIN (precision, MAX_FIXED_MODE_SIZE);

or

	if (precision > MAX_FIXED_MODE_SIZE)
	  precision = MAX_FIXED_MODE_SIZE;

which I think might be easier to read for some people, and may be easier
for the compiler to recognize as a pair on MIN_EXPRs.  Or perhaps
reassociate to use "MIN (MAX_FIXED_MODE_SIZE, 2 * HOST_BITS_PER_WIDE_INT)"
which should be a compile-time constant?

Oh, I don't know.  The code is perfectly fine as it is.  I suspect I'm
beginning to view things far too much from fold's perspective, and such
micro-optimizations are meaningless to the GCC big picture.
Ok for mainline.

Roger
--

Re: Ping: [PATCH] Limit precision of *bitsizetypes types

[John David Anglin]

> On Sat, 18 Nov 2006, John David Anglin wrote:
> > Small patch to stor-layout.c:
> > <http://gcc.gnu.org/ml/gcc-patches/2006-10/msg01522.html>.
> 
> Sorry for the delay.  This is OK for mainline.

I also need this for 4.2.  Without it, fortran is broken on 64-bit hppa.

I don't have any opinion on the use of MIN.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: Ping: [PATCH] Limit precision of *bitsizetypes types

[Roger Sayle]

On Sat, 18 Nov 2006, John David Anglin wrote:
> > On Sat, 18 Nov 2006, John David Anglin wrote:
> > > Small patch to stor-layout.c:
> > > <http://gcc.gnu.org/ml/gcc-patches/2006-10/msg01522.html>.
> >
> > Sorry for the delay.  This is OK for mainline.
>
> I also need this for 4.2.  Without it, fortran is broken on 64-bit hppa.

This is OK for 4.2 too.

Roger
--

Re: [PATCH, commited] PR other/30182, Fix __builtin_finite on HP-UX

[John David Anglin]

> > Should we create a TARGET_HPUX_11 or TARGET_HPUX_11_00 macro to use
> > for this?  We could put it in config/pa/pa-hpux11.h.  Do you have a
> > name preference?
> 
> I like TARGET_HPUX_11 in pa-hpux11.h.

Oh, to mirror the way the other TARGET_HPUX macros are handled, the
macro should also be defined to 0 in pa.h.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH, commited] PR other/30182, Fix __builtin_finite on HP-UX

[Steve Ellcey]

> > I like TARGET_HPUX_11 in pa-hpux11.h.
> 
> Oh, to mirror the way the other TARGET_HPUX macros are handled, the
> macro should also be defined to 0 in pa.h.

Here is the patch I am testing (on 11.11), does it look OK to you?

Steve Ellcey
sje@cup.hp.com


2007-01-25  Steve Ellcey  <sje@cup.hp.com>

	PR other/30182
	* config/pa/pa.h (TARGET_HPUX_11): New.
	* config/pa/pa-hpux11.h (TARGET_HPUX_11): New.
	* config/pa/pa.c (pa_init_builtins): Use TARGET_HPUX_11.


Index: pa.h
===================================================================
--- pa.h	(revision 121157)
+++ pa.h	(working copy)
@@ -84,6 +84,11 @@ extern int flag_pa_unix;
 #define TARGET_HPUX_10_10 0
 #endif
 
+/* HP-UX 11.* features (11.00, 11.11, 11.23, etc.)  */
+#ifndef TARGET_HPUX_11
+#define TARGET_HPUX_11 0
+#endif
+
 /* HP-UX 11i multibyte and UNIX 98 extensions.  */
 #ifndef TARGET_HPUX_11_11
 #define TARGET_HPUX_11_11 0
Index: pa-hpux11.h
===================================================================
--- pa-hpux11.h	(revision 121157)
+++ pa-hpux11.h	(working copy)
@@ -191,3 +191,6 @@ Boston, MA 02110-1301, USA.  */
    with secondary definition (weak) symbols.  */
 #undef TARGET_SOM_SDEF
 #define TARGET_SOM_SDEF 1
+
+#undef TARGET_HPUX_11
+#define TARGET_HPUX_11 1
Index: pa.c
===================================================================
--- pa.c	(revision 121178)
+++ pa.c	(working copy)
@@ -512,7 +512,7 @@ pa_init_builtins (void)
   implicit_built_in_decls[(int) BUILT_IN_FPUTC_UNLOCKED]
     = implicit_built_in_decls[(int) BUILT_IN_PUTC_UNLOCKED];
 #endif
-#if TARGET_HPUX
+#if TARGET_HPUX_11
   if (built_in_decls [BUILT_IN_FINITE])
     set_user_assembler_name (built_in_decls [BUILT_IN_FINITE], "_Isfinite");
   if (built_in_decls [BUILT_IN_FINITEF])

Re: [committed] Fix bug target/30634

[John David Anglin]

> Tested on hppa64-hp-hpux11.11 with no regressions.

Unfortunately, I somehow missed in testing that the 64-bit DFmode
move pattern contained bugs and didn't actually support a zero
CONST_DOUBLE as a source operand as intended.  The enclosed change
corrects this deficiency.

Tested on hppa64-hp-hpux11.11 and hppa-unknown-linux-gnu with no
observed regressions.  Committed to 4.1, 4.2 and trunk.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2007-02-27  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* pa/predicates.md (move_src_operand): Allow zero for mode.
	* pa/pa.md: Fix constraints for zero CONST_DOUBLE in 64-bit DFmode
	move pattern.

Index: config/pa/predicates.md
===================================================================
--- config/pa/predicates.md	(revision 122374)
+++ config/pa/predicates.md	(working copy)
@@ -207,11 +207,14 @@
 ;; instruction.
 
 (define_predicate "move_src_operand"
-  (match_code "subreg,reg,const_int,mem")
+  (match_code "subreg,reg,const_int,const_double,mem")
 {
   if (register_operand (op, mode))
     return 1;
 
+  if (op == CONST0_RTX (mode))
+    return 1;
+
   if (GET_CODE (op) == CONST_INT)
     return cint_ok_for_move (INTVAL (op));
 
Index: config/pa/pa.md
===================================================================
--- config/pa/pa.md	(revision 122374)
+++ config/pa/pa.md	(working copy)
@@ -4343,7 +4343,7 @@
   [(set (match_operand:DF 0 "move_dest_operand"
 			  "=!*r,*r,*r,*r,*r,Q,f,f,T")
 	(match_operand:DF 1 "move_src_operand"
-			  "!*r,J,N,K,RQ,*rM,fM,RT,f"))]
+			  "!*r,J,N,K,RQ,*rG,fG,RT,f"))]
   "(register_operand (operands[0], DFmode)
     || reg_or_0_operand (operands[1], DFmode))
    && !TARGET_SOFT_FLOAT && TARGET_64BIT"

Re: [committed] Fix long local calls on PA HP-UX SOM target

[John David Anglin]

> To fix this, we need to use the "LONG_PIC_SDIFF" sequence which uses
> a difference of labels.  GAS does handle this correctly.

Sigh, I messed up on this one.  GAS does *not* handle local calls using
this sequence.

Tested on hppa2.0w-hp-hpux11.11 and hppa-unknown-linux-gnu.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2007-03-16  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* pa.c (attr_length_call): Partially revert change of 2007-03-09.
	(output_call): Likewise.

Index: config/pa/pa.c
===================================================================
--- config/pa/pa.c	(revision 122960)
+++ config/pa/pa.c	(working copy)
@@ -7271,7 +7271,7 @@
     length += 12;
 
   /* long pc-relative branch sequence.  */
-  else if ((TARGET_SOM && (TARGET_LONG_PIC_SDIFF_CALL || local_call))
+  else if ((TARGET_SOM && TARGET_LONG_PIC_SDIFF_CALL)
 	   || (TARGET_64BIT && !TARGET_GAS)
 	   || (TARGET_GAS && !TARGET_SOM
 	       && (TARGET_LONG_PIC_PCREL_CALL || local_call)))
@@ -7384,7 +7384,7 @@
 	     of increasing length and complexity.  In most cases,
              they don't allow an instruction in the delay slot.  */
 	  if (!((TARGET_LONG_ABS_CALL || local_call) && !flag_pic)
-	      && !(TARGET_SOM && (TARGET_LONG_PIC_SDIFF_CALL || local_call))
+	      && !(TARGET_SOM && TARGET_LONG_PIC_SDIFF_CALL)
 	      && !(TARGET_GAS && !TARGET_SOM
 		   && (TARGET_LONG_PIC_PCREL_CALL || local_call))
 	      && !TARGET_64BIT)
@@ -7432,7 +7432,7 @@
 	    }
 	  else
 	    {
-	      if ((TARGET_SOM && (TARGET_LONG_PIC_SDIFF_CALL || local_call))
+	      if ((TARGET_SOM && TARGET_LONG_PIC_SDIFF_CALL)
 		  || (TARGET_64BIT && !TARGET_GAS))
 		{
 		  /* The HP assembler and linker can handle relocations

Re: [patch,testsuite] Fix PR testsuite/33153

[John David Anglin]

> Tested on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11.

Hmmm, it appears that I didn't look at the results for hppa64-hp-hpux11.11
carefully enough as pr32912-2.c still fails.  However, it's not for the
reason addressed by the proposed change.  The function foo is miscompiled.

In looking at pr32912-2.c, I noticed that a, b, c, d, e and f are
not used, so I would like to revise my last patch.

Ok?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2007-08-26  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR testsuite/33153
	* gcc.dg/pr32912-1.c: Make declaration of a, b, c, d, e and f static.
	* gcc.dg/pr32912-2.c: Delete declaration of a, b, c, d, e and f.

Index: gcc.dg/pr32912-1.c
===================================================================
--- gcc.dg/pr32912-1.c	(revision 127802)
+++ gcc.dg/pr32912-1.c	(working copy)
@@ -6,7 +6,7 @@
 
 typedef int __m128i __attribute__ ((__vector_size__ (16)));
 
-__m128i a, b, c, d, e, f;
+static __m128i a, b, c, d, e, f;
 
 void
 foo (__m128i x)
Index: gcc.dg/pr32912-2.c
===================================================================
--- gcc.dg/pr32912-2.c	(revision 127802)
+++ gcc.dg/pr32912-2.c	(working copy)
@@ -5,8 +5,6 @@
 
 typedef int __m128i __attribute__ ((__vector_size__ (16)));
 
-__m128i a, b, c, d, e, f;
-
 __m128i
 foo (void)
 {

Re: [patch,testsuite] Fix PR testsuite/33153

[Jakub Jelinek]

On Sun, Aug 26, 2007 at 07:00:51PM -0400, John David Anglin wrote:
> > Tested on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11.
> 
> Hmmm, it appears that I didn't look at the results for hppa64-hp-hpux11.11
> carefully enough as pr32912-2.c still fails.  However, it's not for the
> reason addressed by the proposed change.  The function foo is miscompiled.
> 
> In looking at pr32912-2.c, I noticed that a, b, c, d, e and f are
> not used, so I would like to revise my last patch.

Both changes look ok to me, the latter is certainly obvious.
For the first you could alternatively try __attribute__((nocommon)),
though I wonder if pa/hpux shouldn't do that automatically for objects
which it can't create as common, perhaps with some warning.

> 2007-08-26  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>
> 
> 	PR testsuite/33153
> 	* gcc.dg/pr32912-1.c: Make declaration of a, b, c, d, e and f static.
> 	* gcc.dg/pr32912-2.c: Delete declaration of a, b, c, d, e and f.
> 
> Index: gcc.dg/pr32912-1.c
> ===================================================================
> --- gcc.dg/pr32912-1.c	(revision 127802)
> +++ gcc.dg/pr32912-1.c	(working copy)
> @@ -6,7 +6,7 @@
>  
>  typedef int __m128i __attribute__ ((__vector_size__ (16)));
>  
> -__m128i a, b, c, d, e, f;
> +static __m128i a, b, c, d, e, f;
>  
>  void
>  foo (__m128i x)
> Index: gcc.dg/pr32912-2.c
> ===================================================================
> --- gcc.dg/pr32912-2.c	(revision 127802)
> +++ gcc.dg/pr32912-2.c	(working copy)
> @@ -5,8 +5,6 @@
>  
>  typedef int __m128i __attribute__ ((__vector_size__ (16)));
>  
> -__m128i a, b, c, d, e, f;
> -
>  __m128i
>  foo (void)
>  {

	Jakub

Re: [patch,testsuite] Fix PR testsuite/33153

[John David Anglin]

> For the first you could alternatively try __attribute__((nocommon)),
> though I wonder if pa/hpux shouldn't do that automatically for objects
> which it can't create as common, perhaps with some warning.

It looks like bss_initializer_p() would need to be modified to support
this, or is there some other way?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [patch,testsuite] Fix PR testsuite/33153

[John David Anglin]

> > In looking at pr32912-2.c, I noticed that a, b, c, d, e and f are
> > not used, so I would like to revise my last patch.
> 
> Both changes look ok to me, the latter is certainly obvious.
> For the first you could alternatively try __attribute__((nocommon)),
> though I wonder if pa/hpux shouldn't do that automatically for objects
> which it can't create as common, perhaps with some warning.

I've committed the following to trunk.

Mark, this fixes a testsuite regression introduced after the 4.2.1
release.  Is this ok for 4.2.2?

Regards,
Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2007-09-12  John David Anglin  <dave.anglin@nrc-crnc.gc.ca>

	PR testsuite/33153
	* gcc.dg/pr32912-1.c: Add -fno-common to options on hppa*-*-hpux*.
	* gcc.dg/pr32912-2.c: Delete declaration of a, b, c, d, e and f.

Index: gcc.dg/pr32912-1.c
===================================================================
--- gcc.dg/pr32912-1.c	(revision 128448)
+++ gcc.dg/pr32912-1.c	(working copy)
@@ -1,6 +1,7 @@
 /* PR middle-end/32912 */
 /* { dg-do run } */
 /* { dg-options "-O2 -w" } */
+/* { dg-options "-O2 -w -fno-common" { target hppa*-*-hpux* } } */
 
 extern void abort (void);
 
Index: gcc.dg/pr32912-2.c
===================================================================
--- gcc.dg/pr32912-2.c	(revision 128448)
+++ gcc.dg/pr32912-2.c	(working copy)
@@ -5,8 +5,6 @@
 
 typedef int __m128i __attribute__ ((__vector_size__ (16)));
 
-__m128i a, b, c, d, e, f;
-
 __m128i
 foo (void)
 {

Re: [patch,testsuite] Fix PR testsuite/33153

[Mark Mitchell]

John David Anglin wrote:

> Mark, this fixes a testsuite regression introduced after the 4.2.1
> release.  Is this ok for 4.2.2?

OK.

-- 
Mark Mitchell
CodeSourcery
mark@codesourcery.com
(650) 331-3385 x713

ping: [PATCH] Fix PR middle-end/33273

[John David Anglin]

http://gcc.gnu.org/ml/gcc-patches/2007-09/msg00084.html

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: ping: [PATCH] Fix PR middle-end/33273

[Jakub Jelinek]

On Sat, Sep 15, 2007 at 09:00:02PM -0400, John David Anglin wrote:
> http://gcc.gnu.org/ml/gcc-patches/2007-09/msg00084.html

Looks good to me, but I'm afraid I can't approve it.

	Jakub

Re: ping: [PATCH] Fix PR middle-end/33273

[Richard Guenther]

On 9/16/07, John David Anglin <dave@hiauly1.hia.nrc.ca> wrote:
> http://gcc.gnu.org/ml/gcc-patches/2007-09/msg00084.html

Ok.

Thanks,
Richard.

Re: [committed] [PR target/34091] Secondary reloads for floating-point register classes

[John David Anglin]

> 2) We don't have reload_inhi and reload_outhi patterns, so the secondary
>    reload technique described above is broken for HImode and QImode values
>    in the floating-point registers.

The thought that HImode and QImode values could be loaded to or stored
from from the floating-point registers is wrong.  This can only be done
by loading/storing first to the general registers.  Thus, I've decided
to apply the change to the 4.2 branch as well.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [committed] [PR target/34091] Secondary reloads for floating-point register classes

[John David Anglin]

I added the following test from PR target/34091.  Tested on
hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2007-12-13  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR target/34091
	* gcc.c-torture/compile/pr34091.c: New test.

--- /dev/null	Sun Dec  9 15:49:09 2007
+++ gcc.c-torture/compile/pr34091.c	Sun Dec  9 15:46:56 2007
@@ -0,0 +1,175 @@
+typedef unsigned int GLenum;
+typedef unsigned char GLboolean;
+typedef int GLint;
+typedef unsigned short GLushort;
+typedef unsigned int GLuint;
+typedef float GLfloat;
+typedef GLushort GLchan;
+struct gl_texture_image;
+typedef struct __GLcontextRec GLcontext;
+typedef void (*FetchTexelFuncC) (const struct gl_texture_image * texImage,
+				 GLint col, GLint row, GLint img,
+				 GLchan * texelOut);
+struct gl_texture_format
+{
+};
+struct gl_texture_image
+{
+  GLenum _BaseFormat;
+  GLboolean _IsPowerOfTwo;
+  FetchTexelFuncC FetchTexelc;
+};
+struct gl_texture_object
+{
+  GLenum Target;
+  GLenum WrapS;
+  GLenum MinFilter;
+  GLenum MagFilter;
+  GLint BaseLevel;
+  GLint _MaxLevel;
+  struct gl_texture_image *Image[6][12];
+};
+enum _format
+{
+    MESA_FORMAT_RGBA_DXT3, MESA_FORMAT_RGBA_DXT5, MESA_FORMAT_RGBA,
+    MESA_FORMAT_RGB, MESA_FORMAT_ALPHA, MESA_FORMAT_LUMINANCE,
+};
+typedef void (*texture_sample_func) (GLcontext * ctx,
+				     const struct gl_texture_object * tObj,
+				     GLuint n, const GLfloat texcoords[][4],
+				     const GLfloat lambda[],
+				     GLchan rgba[][4]);
+lerp_2d (GLfloat a, GLfloat b, GLfloat v00, GLfloat v10, GLfloat v01,
+	 GLfloat v11)
+{
+  const GLfloat temp0 = ((v00) + (a) * ((v10) - (v00)));
+  const GLfloat temp1 = ((v01) + (a) * ((v11) - (v01)));
+  return ((temp0) + (b) * ((temp1) - (temp0)));
+}
+static __inline__ void
+lerp_rgba (GLchan result[4], GLfloat t, const GLchan a[4], const GLchan b[4])
+{
+  result[0] = (GLchan) (((a[0]) + (t) * ((b[0]) - (a[0]))) + 0.5);
+  result[1] = (GLchan) (((a[1]) + (t) * ((b[1]) - (a[1]))) + 0.5);
+  result[2] = (GLchan) (((a[2]) + (t) * ((b[2]) - (a[2]))) + 0.5);
+}
+static __inline__ void
+lerp_rgba_2d (GLchan result[4], GLfloat a, GLfloat b, const GLchan t00[4],
+	      const GLchan t10[4], const GLchan t01[4], const GLchan t11[4])
+{
+  result[0] = (GLchan) (lerp_2d (a, b, t00[0], t10[0], t01[0], t11[0]) + 0.5);
+  result[1] = (GLchan) (lerp_2d (a, b, t00[1], t10[1], t01[1], t11[1]) + 0.5);
+  result[2] = (GLchan) (lerp_2d (a, b, t00[2], t10[2], t01[2], t11[2]) + 0.5);
+}
+static __inline__ void
+sample_2d_linear_repeat (GLcontext * ctx,
+			 const struct gl_texture_object *tObj,
+			 const struct gl_texture_image *img,
+			 const GLfloat texcoord[4], GLchan rgba[])
+{
+  GLint i0, j0, i1, j1;
+  GLfloat a, b;
+  GLchan t00[4], t10[4], t01[4], t11[4];
+  {
+  };
+  img->FetchTexelc (img, i1, j1, 0, t11);
+  lerp_rgba_2d (rgba, a, b, t00, t10, t01, t11);
+}
+sample_2d_nearest_mipmap_linear (GLcontext * ctx,
+				 const struct gl_texture_object *tObj,
+				 GLuint n, const GLfloat texcoord[][4],
+				 const GLfloat lambda[], GLchan rgba[][4])
+{
+  GLuint i;
+  GLint level = linear_mipmap_level (tObj, lambda[i]);
+  sample_2d_nearest (ctx, tObj, tObj->Image[0][tObj->_MaxLevel], texcoord[i], rgba[i]);
+  GLchan t0[4], t1[4];
+  sample_2d_nearest (ctx, tObj, tObj->Image[0][level], texcoord[i], t0);
+  sample_2d_nearest (ctx, tObj, tObj->Image[0][level + 1], texcoord[i], t1);
+}
+static void
+sample_2d_linear_mipmap_linear_repeat (GLcontext * ctx,
+				       const struct gl_texture_object *tObj,
+				       GLuint n, const GLfloat texcoord[][4],
+				       const GLfloat lambda[],
+				       GLchan rgba[][4])
+{
+  GLuint i;
+  for (i = 0; i < n; i++)
+    {
+      GLint level = linear_mipmap_level (tObj, lambda[i]);
+      if (level >= tObj->_MaxLevel)
+	{
+	  GLchan t0[4], t1[4];
+	  const GLfloat f = ((lambda[i]) - ifloor (lambda[i]));
+	  sample_2d_linear_repeat (ctx, tObj, tObj->Image[0][level],
+				   texcoord[i], t0);
+	  sample_2d_linear_repeat (ctx, tObj, tObj->Image[0][level + 1],
+				   texcoord[i], t1);
+	  lerp_rgba (rgba[i], f, t0, t1);
+	}
+    }
+}
+static void
+sample_lambda_2d (GLcontext * ctx, const struct gl_texture_object *tObj,
+		  GLuint n, const GLfloat texcoords[][4],
+		  const GLfloat lambda[], GLchan rgba[][4])
+{
+  const struct gl_texture_image *tImg = tObj->Image[0][tObj->BaseLevel];
+  GLuint minStart, minEnd;
+  GLuint magStart, magEnd;
+  const GLboolean repeatNoBorderPOT = (tObj->WrapS == 0x2901)
+    && (tImg->_BaseFormat != 0x1900) && tImg->_IsPowerOfTwo;
+  compute_min_mag_ranges (tObj, n, lambda, &minStart, &minEnd, &magStart,
+			  &magEnd);
+  if (minStart < minEnd)
+    {
+      const GLuint m = minEnd - minStart;
+      switch (tObj->MinFilter)
+	{
+	case 0x2600:
+	  if (repeatNoBorderPOT)
+	    {
+		case MESA_FORMAT_RGB:
+		  opt_sample_rgb_2d (ctx, tObj, m, texcoords + minStart,
+				     ((void *) 0), rgba + minStart);
+		case MESA_FORMAT_RGBA:
+		  opt_sample_rgba_2d (ctx, tObj, m, texcoords + minStart,
+				      ((void *) 0), rgba + minStart);
+	    }
+	    {
+	      sample_nearest_2d (ctx, tObj, m, texcoords + minStart,
+				 ((void *) 0), rgba + minStart);
+	    }
+	  break;
+	  sample_2d_nearest_mipmap_linear (ctx, tObj, m, texcoords + minStart,
+					   lambda + minStart,
+					   rgba + minStart);
+	case 0x2703:
+	  if (repeatNoBorderPOT)
+	    sample_2d_linear_mipmap_linear_repeat (ctx, tObj, m,
+						   texcoords + minStart,
+						   lambda + minStart,
+						   rgba + minStart);
+	}
+      switch (tObj->MagFilter)
+	{
+		case MESA_FORMAT_RGB:
+		  opt_sample_rgb_2d (ctx, tObj, m, texcoords + magStart,
+				     ((void *) 0), rgba + magStart);
+		  opt_sample_rgba_2d (ctx, tObj, m, texcoords + magStart,
+				      ((void *) 0), rgba + magStart);
+                  sample_nearest_2d (ctx, tObj, m, texcoords + magStart,
+                                     ((void *) 0), rgba + magStart);
+	}
+    }
+}
+texture_sample_func
+_swrast_choose_texture_sample_func (const struct gl_texture_object *t)
+{
+      switch (t->Target)
+	{
+	case 0x0DE0:
+	      return &sample_lambda_2d;
+	}
+}

Re: [committed] Fix PR target/34525 - unrecognized insn (take 2)

[John David Anglin]

> The enclosed change fixes PR target/34525.  An unrecognized instruction
> was generated because a function label was not forced to memory.

Sigh, I forgot to load the label after forcing it to memory.  The
enclosed updated fixes this.

Tested on hppa-unknown-linux-gnu and hppa64-hp-hpux11.11 with no
regressions.  Committed to trunk.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2007-12-21  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR target/34525
	* pa.c (legitimize_pic_address): Emit insn to load function label
	forced to memory.

Index: config/pa/pa.c
===================================================================
--- config/pa/pa.c	(revision 131125)
+++ config/pa/pa.c	(working copy)
@@ -694,19 +694,37 @@
       tmp_reg = ((reload_in_progress || reload_completed)
 		 ? reg : gen_reg_rtx (Pmode));
 
-      /* Force function labels into memory.  */
       if (function_label_operand (orig, mode))
-	orig = force_const_mem (mode, orig);
-
-      emit_move_insn (tmp_reg,
-		      gen_rtx_PLUS (word_mode, pic_offset_table_rtx,
-				    gen_rtx_HIGH (word_mode, orig)));
-      pic_ref
-	= gen_const_mem (Pmode,
-		         gen_rtx_LO_SUM (Pmode, tmp_reg,
-				         gen_rtx_UNSPEC (Pmode,
+	{
+	  /* Force function label into memory.  */
+	  orig = XEXP (force_const_mem (mode, orig), 0);
+	  /* Load plabel address from DLT.  */
+	  emit_move_insn (tmp_reg,
+			  gen_rtx_PLUS (word_mode, pic_offset_table_rtx,
+					gen_rtx_HIGH (word_mode, orig)));
+	  pic_ref
+	    = gen_const_mem (Pmode,
+			     gen_rtx_LO_SUM (Pmode, tmp_reg,
+					     gen_rtx_UNSPEC (Pmode,
+						         gen_rtvec (1, orig),
+						         UNSPEC_DLTIND14R)));
+	  emit_move_insn (reg, pic_ref);
+	  /* Now load address of function descriptor.  */
+	  pic_ref = gen_rtx_MEM (Pmode, reg);
+	}
+      else
+	{
+	  /* Load symbol reference from DLT.  */
+	  emit_move_insn (tmp_reg,
+			  gen_rtx_PLUS (word_mode, pic_offset_table_rtx,
+					gen_rtx_HIGH (word_mode, orig)));
+	  pic_ref
+	    = gen_const_mem (Pmode,
+			     gen_rtx_LO_SUM (Pmode, tmp_reg,
+					     gen_rtx_UNSPEC (Pmode,
 						         gen_rtvec (1, orig),
 						         UNSPEC_DLTIND14R)));
+	}
 
       current_function_uses_pic_offset_table = 1;
       mark_reg_pointer (reg, BITS_PER_UNIT);

[ping] Ignore thread local symbols when generating dbx debug info

[John David Anglin]

http://gcc.gnu.org/ml/gcc-patches/2007-12/msg01166.html

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [ping] Ignore thread local symbols when generating dbx debug info

[John David Anglin]

Second ping.

> http://gcc.gnu.org/ml/gcc-patches/2007-12/msg01166.html

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [ping] Ignore thread local symbols when generating dbx debug info

[Jim Wilson]

[-- Attachment #1: Type: text/plain, Size: 3191 bytes --]

On Thu, 2008-02-07 at 19:43 -0500, John David Anglin wrote:
> Second ping.
> > http://gcc.gnu.org/ml/gcc-patches/2007-12/msg01166.html

Belatedly replying to this, now that I'm doing FSF gcc work again... I
had to spend a bit of time looking at the code.  This assumes some
knowledge of emutls, fortran, and hpux, all of which I am lacking.  I do
see the problem though.  A emutls variable access requires a call to
__emutls_get_address, and then we find the variable at a fixed offset
from the return value.  There is no way to express this in the stabs
debug info.

It is a bit annoying that the emutls.c file has no comments explaining
what it does.  It doesn't even have comments for each function as
required by the coding conventions.  It would be easier to understand if
this stuff was documented some place.

I thought it curious that this was failing for Fortran, but not
apparently for C.  Otherwise presumably you would have given a C
testcase.  I also wasn't able to reproduce this with a trivial C
example.  I tried debugging this a little bit.  I see that the normal
variable handling in expand_expr_real_1, case VAR_DECL, has an out for
emutls variables.  We create the necessary code to access it, and then
return, before we use DECL_RTL, which calls make_decl_rtl which sets the
DECL_RTL field.  Since the emutls variable has no DECL_RTL, we don't try
to emit debug info for it.  However, with the Fortran testcase, the
DECL_RTL got created in nonoverlapping_memrefs_p during the cse pass.
This seems questionable to me.  With emutls, a variable may or may not
have a DECL_RTL set, depending on how it was optimized.  This could lead
to confusion later.  It may also be causing subtle bugs.  For instance,
mudflap has hooks in make_decl_rtl, which may or may not be called with
emutls, depending on how it was optimized, which means mudflap may or
may not be tracking the variable.  Perhaps we should be creating the
DECL_RTL always in expand_expr_real_1.  Perhaps make_decl_rtl should
have support for emutls variables.

Anyways, the dbxout.c change looks basically OK to me.  It would be nice
if there was a comment explaining what the patch is doing.  You are
right that canonical form for RTL will always put the SYMBOL_REF before
the CONST_INT in a PLUS.  It looks like we only have to handle the
output of dbxout_expand_expr, so we don't have to handle any more
complicated expressions.  However, this points to another possible
solution, which looks a little simpler to me.  We can put this test in
dbxout_expand_expr.  I attached a patch that does this.

Trying my patch on the testcase, I see the result is a little bit
different than yours.  With my patch, debug info is disabled for foo,
thrc, bar1, and bar2.  With your patch, debug info is disable for foo,
thrc, and bar2.  Which means you still have debug info for bar1.  The
debug info seems confused for bar1 though.  Internally, gcc thinks it is
addressed relative to thrc_, and then doesn't emit the address because
it is a global, so it slips through your checks.

Can you test my patch and see if it works?  If not, then your patch is
fine, preferably with a comment added like the one in my patch.

Jim

[-- Attachment #2: patch.dbx.emutls --]
[-- Type: text/plain, Size: 924 bytes --]

2008-03-04  James E. Wilson  <wilson@tuliptree.org>

	* dbxout.c (dbxout_expand_expr, case VAR_DECL): Return NULL for
	emulated thread local variables.

Index: dbxout.c
===================================================================
--- dbxout.c	(revision 132829)
+++ dbxout.c	(working copy)
@@ -2332,6 +2332,15 @@
   switch (TREE_CODE (expr))
     {
     case VAR_DECL:
+      /* We can't handle emulated tls variables, because the address is an
+	 offset to the return value of __emutls_get_address, and there is no
+	 way to express that in stabs.  Also, there are name mangling issues
+	 here.  We end up with references to undefined symbols if we don't
+	 disable debug info for these variables.  */
+      if (!targetm.have_tls && DECL_THREAD_LOCAL_P (expr))
+	return NULL;
+      /* FALLTHRU */
+
     case PARM_DECL:
       if (DECL_HAS_VALUE_EXPR_P (expr))
 	return dbxout_expand_expr (DECL_VALUE_EXPR (expr));

Re: [ping] Ignore thread local symbols when generating dbx debug

[John David Anglin]

> 2008-03-04  James E. Wilson  <wilson@tuliptree.org>
> 
> 	* dbxout.c (dbxout_expand_expr, case VAR_DECL): Return NULL for
> 	emulated thread local variables.

This change also works.  It eliminates all the emulated TLS failures
in the libgomp testsuite on hppa2.0w-hp-hpux11* and I didn't see any
new regressions related to the change.

Thanks,
Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [Bulk] Re: [ping] Ignore thread local symbols when generating dbx debug

[Jim Wilson]

On Sat, 2008-03-08 at 15:48 -0500, John David Anglin wrote:
> This change also works.  It eliminates all the emulated TLS failures
> in the libgomp testsuite on hppa2.0w-hp-hpux11* and I didn't see any
> new regressions related to the change.

Great, so this is OK to install.  I know that mainline is open, but I'm
a little out of touch on the branches.  Is this a regression that we
need fixed on one of the branches?

Jim

Re: [Bulk] Re: [ping] Ignore thread local symbols when generating

[John David Anglin]

> Great, so this is OK to install.  I know that mainline is open, but I'm
> a little out of touch on the branches.  Is this a regression that we
> need fixed on one of the branches?

It's a regression on 4.3.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [Bulk] Re: [ping] Ignore thread local symbols when generating

[Jim Wilson]

On Mon, 2008-03-10 at 12:44 -0400, John David Anglin wrote:
> It's a regression on 4.3.

The patch is OK for the gcc-4.3 branch.

Jim

Re: [committed] Remove xfail for hppa*-*-* from g++.dg/tree-ssa/ivopts-1.C

[John David Anglin]

> Committed to trunk.  Tested on hppa2.0w-hp-hpux11.11.

Likewise on 4.2, the test is no longer failing on hppa*-*-*.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2008-02-06  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * g++.dg/tree-ssa/ivopts-1.C: Remove xfails for hppa*-*-*.

Index: g++.dg/tree-ssa/ivopts-1.C
===================================================================
--- g++.dg/tree-ssa/ivopts-1.C	(revision 132079)
+++ g++.dg/tree-ssa/ivopts-1.C	(working copy)
@@ -13,6 +13,6 @@
 }
 
 /* { dg-final { scan-tree-dump-not "-&x" "ivopts" } } */
-/* { dg-final { scan-tree-dump-not "offset: -4B" "ivopts" { xfail i?86-*-* x86_64-*-* hppa*-*-* } } } */
-/* { dg-final { scan-tree-dump-not "&x\\\[5\\\]" "ivopts" { xfail i?86-*-* x86_64-*-* hppa*-*-* } } } */
+/* { dg-final { scan-tree-dump-not "offset: -4B" "ivopts" { xfail i?86-*-* x86_64-*-* } } } */
+/* { dg-final { scan-tree-dump-not "&x\\\[5\\\]" "ivopts" { xfail i?86-*-* x86_64-*-* } } } */
 /* { dg-final { cleanup-tree-dump "ivopts" } } */

Re: RFC: Fix PR middle-end/34150 -- Lost LABEL_NUSES counts

[John David Anglin]

> The attached patch is a target specific fix for PR middle-end/34150.
> Is this the right approach, or should reload handle this?

I have convinced myself that this is the right approach.  alpha.md
has a postreload split that handles LABEL_REFs in a similar manner.

I checked the lreg and greg rtl dumps for the testcase in the PR.
We now have identical REG_NOTES when setting a register with a LABEL_REF
after lreg and greg.  Similarly, the LABEL_NUSES counts for nonlocal
goto labels agree.

The patch has been tested on hppa-unknown-linux-gnu and hppa64-hp-hpux11.11.
Committed to all active branches.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2008-02-09  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR middle_end/34150
	* pa.c (legitimize_pic_address): Add REG_EQUAL note on sets with a
	pic_label_operand source.  Similarly, add a REG_LABEL_OPERAND note
	and update LABEL_NUSES during and after reload.

Index: config/pa/pa.c
===================================================================
--- config/pa/pa.c	(revision 132195)
+++ config/pa/pa.c	(working copy)
@@ -668,6 +668,8 @@
   /* Labels need special handling.  */
   if (pic_label_operand (orig, mode))
     {
+      rtx insn;
+
       /* We do not want to go through the movXX expanders here since that
 	 would create recursion.
 
@@ -678,7 +680,24 @@
 	 So instead we just emit the raw set, which avoids the movXX
 	 expanders completely.  */
       mark_reg_pointer (reg, BITS_PER_UNIT);
-      emit_insn (gen_rtx_SET (VOIDmode, reg, orig));
+      insn = emit_insn (gen_rtx_SET (VOIDmode, reg, orig));
+
+      /* Put a REG_EQUAL note on this insn, so that it can be optimized.  */
+      REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_EQUAL, orig, REG_NOTES (insn));
+
+      /* During and after reload, we need to generate a REG_LABEL_OPERAND note
+	 and update LABEL_NUSES because this is not done automatically.  */
+      if (reload_in_progress || reload_completed)
+	{
+	  /* Extract LABEL_REF.  */
+	  if (GET_CODE (orig) == CONST)
+	    orig = XEXP (XEXP (orig, 0), 0);
+	  /* Extract CODE_LABEL.  */
+	  orig = XEXP (orig, 0);
+	  REG_NOTES (insn) = gen_rtx_INSN_LIST (REG_LABEL_OPERAND, orig,
+						REG_NOTES (insn));
+	  LABEL_NUSES (orig)++;
+	}
       current_function_uses_pic_offset_table = 1;
       return reg;
     }

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[John David Anglin]

> The first form works.  I'll see if the addend can be adjusted.

I've appended an updated binutils change.  This adjusts the addend
in tc-hppa.c and readelf.c to account for the fact that PA-RISC
PCREL relocations are for symbol - PC - 8 + addend.

GAS now appears to generate correct locations for symbol differences,
and the cfi tests are now successful on both hppa-unknown-linux-gnu
and hppa64-hp-hpux11.11.  However, we still have some EH failures
on linux.  On hppa64, we aren't failing the C cleanup tests but
there are still a lot of g++ and libstdc++ EH failures.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Index: binutils/readelf.c
===================================================================
RCS file: /cvs/src/src/binutils/readelf.c,v
retrieving revision 1.423
diff -u -3 -p -r1.423 readelf.c
--- binutils/readelf.c	8 Aug 2008 19:24:48 -0000	1.423
+++ binutils/readelf.c	17 Aug 2008 19:23:05 -0000
@@ -8156,7 +8156,7 @@ is_32bit_pcrel_reloc (unsigned int reloc
     case EM_ARM:
       return reloc_type == 3;  /* R_ARM_REL32 */
     case EM_PARISC:
-      return reloc_type == 0;  /* R_PARISC_NONE.  *//* FIXME: This reloc is generated, but it may be a bug.  */
+      return reloc_type == 9;  /* R_PARISC_PCREL32.  */
     case EM_PPC:
       return reloc_type == 26; /* R_PPC_REL32.  */
     case EM_PPC64:
@@ -8219,6 +8219,36 @@ is_64bit_abs_reloc (unsigned int reloc_t
     }
 }
 
+/* Like is_32bit_pcrel_reloc except that it returns TRUE iff RELOC_TYPE is
+   a 64-bit pc-relative RELA relocation used in DWARF debug sections.  */
+
+static bfd_boolean
+is_64bit_pcrel_reloc (unsigned int reloc_type)
+{
+  switch (elf_header.e_machine)
+    {
+    case EM_ALPHA:
+      return reloc_type == 11; /* R_ALPHA_SREL64 */
+    case EM_IA_64:
+      return reloc_type == 0x4f; /* R_IA64_PCREL64LSB */
+    case EM_PARISC:
+      return reloc_type == 72; /* R_PARISC_PCREL64 */
+    case EM_PPC64:
+      return reloc_type == 44; /* R_PPC64_REL64 */
+    case EM_SPARC32PLUS:
+    case EM_SPARCV9:
+    case EM_SPARC:
+      return reloc_type == 46; /* R_SPARC_DISP64 */
+    case EM_X86_64:
+      return reloc_type == 24; /* R_X86_64_PC64 */
+    case EM_S390_OLD:
+    case EM_S390:
+      return reloc_type == 23;	/* R_S390_PC64 */
+    default:
+      return FALSE;
+    }
+}
+
 /* Like is_32bit_abs_reloc except that it returns TRUE iff RELOC_TYPE is
    a 16-bit absolute RELA relocation used in DWARF debug sections.  */
 
@@ -8392,7 +8422,8 @@ debug_apply_relocations (void *file,
 	  if (is_32bit_abs_reloc (reloc_type)
 	      || is_32bit_pcrel_reloc (reloc_type))
 	    reloc_size = 4;
-	  else if (is_64bit_abs_reloc (reloc_type))
+	  else if (is_64bit_abs_reloc (reloc_type)
+		   || is_64bit_pcrel_reloc (reloc_type))
 	    reloc_size = 8;
 	  else if (is_16bit_abs_reloc (reloc_type))
 	    reloc_size = 2;
@@ -8435,10 +8466,16 @@ debug_apply_relocations (void *file,
 	    }
 
 	  addend = is_rela ? rp->r_addend : byte_get (loc, reloc_size);
-	  
-	  if (is_32bit_pcrel_reloc (reloc_type))
-	    byte_put (loc, (addend + sym->st_value) - rp->r_offset,
-		      reloc_size);
+
+	  if (is_32bit_pcrel_reloc (reloc_type)
+	      || is_64bit_pcrel_reloc (reloc_type))
+	    {
+	      /* Adjust addend on PA-RISC.  */
+	      if (elf_header.e_machine == EM_PARISC)
+		addend -= 8;
+	      byte_put (loc, (addend + sym->st_value) - rp->r_offset,
+			reloc_size);
+	    }
 	  else
 	    byte_put (loc, addend + sym->st_value, reloc_size);
 	}
Index: gas/dw2gencfi.c
===================================================================
RCS file: /cvs/src/src/gas/dw2gencfi.c,v
retrieving revision 1.34
diff -u -3 -p -r1.34 dw2gencfi.c
--- gas/dw2gencfi.c	13 Feb 2008 10:14:37 -0000	1.34
+++ gas/dw2gencfi.c	17 Aug 2008 19:23:05 -0000
@@ -31,6 +31,16 @@
 # define DWARF2_LINE_MIN_INSN_LENGTH 1
 #endif
 
+/* By default, use 32-bit relocations from .eh_frame into .text.  */
+#ifndef DWARF2_FDE_RELOC_SIZE
+# define DWARF2_FDE_RELOC_SIZE 4
+#endif
+
+/* By default, use a read-only .eh_frame section.  */
+#ifndef DWARF2_EH_FRAME_READ_ONLY
+# define DWARF2_EH_FRAME_READ_ONLY SEC_READONLY
+#endif
+
 #ifndef EH_FRAME_ALIGNMENT
 # define EH_FRAME_ALIGNMENT (bfd_get_arch_size (stdoutput) == 64 ? 3 : 2)
 #endif
@@ -1041,6 +1051,7 @@ output_cie (struct cie_entry *cie)
   expressionS exp;
   struct cfi_insn_data *i;
   offsetT augmentation_size;
+  int enc;
 
   cie->start_address = symbol_temp_new_now ();
   after_size_address = symbol_temp_make ();
@@ -1096,11 +1107,22 @@ output_cie (struct cie_entry *cie)
     }
   if (cie->lsda_encoding != DW_EH_PE_omit)
     out_one (cie->lsda_encoding);
+
+  switch (DWARF2_FDE_RELOC_SIZE)
+    {
+    case 4:
+      enc = DW_EH_PE_sdata4;
+      break;
+    case 8:
+      enc = DW_EH_PE_sdata8;
+      break;
+    default:
+      abort ();
+    }
 #if defined DIFF_EXPR_OK || defined tc_cfi_emit_pcrel_expr
-  out_one (DW_EH_PE_pcrel | DW_EH_PE_sdata4);
-#else
-  out_one (DW_EH_PE_sdata4);
+  enc |= DW_EH_PE_pcrel;
 #endif
+  out_one (enc);
 
   if (cie->first)
     for (i = cie->first; i != cie->last; i = i->next)
@@ -1135,22 +1157,22 @@ output_fde (struct fde_entry *fde, struc
 #ifdef DIFF_EXPR_OK
   exp.X_add_symbol = fde->start_address;
   exp.X_op_symbol = symbol_temp_new_now ();
-  emit_expr (&exp, 4);				/* Code offset.  */
+  emit_expr (&exp, DWARF2_FDE_RELOC_SIZE);	/* Code offset.  */
 #else
   exp.X_op = O_symbol;
   exp.X_add_symbol = fde->start_address;
   exp.X_op_symbol = NULL;
 #ifdef tc_cfi_emit_pcrel_expr
-  tc_cfi_emit_pcrel_expr (&exp, 4);		/* Code offset.  */
+  tc_cfi_emit_pcrel_expr (&exp, DWARF2_FDE_RELOC_SIZE);	 /* Code offset.  */
 #else
-  emit_expr (&exp, 4);				/* Code offset.  */
+  emit_expr (&exp, DWARF2_FDE_RELOC_SIZE);	/* Code offset.  */
 #endif
   exp.X_op = O_subtract;
 #endif
 
   exp.X_add_symbol = fde->end_address;
   exp.X_op_symbol = fde->start_address;		/* Code length.  */
-  emit_expr (&exp, 4);
+  emit_expr (&exp, DWARF2_FDE_RELOC_SIZE);
 
   augmentation_size = encoding_size (fde->lsda_encoding);
   out_uleb128 (augmentation_size);		/* Augmentation size.  */
@@ -1319,7 +1341,8 @@ cfi_finish (void)
   /* Open .eh_frame section.  */
   cfi_seg = subseg_new (".eh_frame", 0);
   bfd_set_section_flags (stdoutput, cfi_seg,
-			 SEC_ALLOC | SEC_LOAD | SEC_DATA | SEC_READONLY);
+			 SEC_ALLOC | SEC_LOAD | SEC_DATA
+			 | DWARF2_EH_FRAME_READ_ONLY);
   subseg_set (cfi_seg, 0);
   record_alignment (cfi_seg, EH_FRAME_ALIGNMENT);
 
Index: gas/config/tc-hppa.c
===================================================================
RCS file: /cvs/src/src/gas/config/tc-hppa.c,v
retrieving revision 1.138
diff -u -3 -p -r1.138 tc-hppa.c
--- gas/config/tc-hppa.c	16 Mar 2008 23:16:03 -0000	1.138
+++ gas/config/tc-hppa.c	17 Aug 2008 19:23:05 -0000
@@ -1375,6 +1375,16 @@ tc_gen_reloc (asection *section, fixS *f
 
   reloc->sym_ptr_ptr = xmalloc (sizeof (asymbol *));
   *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+
+  /* Allow fixup_segment to recognize hand-written pc-relative
+     relocations.  When we went through cons_fix_new_hppa, we
+     classified them as complex.  Simplify that now.  */
+  if (fixp->fx_r_type == R_HPPA_COMPLEX && fixp->fx_pcrel)
+    {
+      fixp->fx_r_type = R_HPPA_PCREL_CALL;
+      fixp->fx_offset += 8;
+    }
+
   codes = hppa_gen_reloc_type (stdoutput,
 			       fixp->fx_r_type,
 			       hppa_fixp->fx_r_format,
Index: gas/config/tc-hppa.h
===================================================================
RCS file: /cvs/src/src/gas/config/tc-hppa.h,v
retrieving revision 1.35
diff -u -3 -p -r1.35 tc-hppa.h
--- gas/config/tc-hppa.h	12 Aug 2008 23:39:30 -0000	1.35
+++ gas/config/tc-hppa.h	17 Aug 2008 19:23:05 -0000
@@ -186,8 +186,6 @@ int hppa_fix_adjustable (struct fix *);
 
 #define elf_tc_final_processing	elf_hppa_final_processing
 void elf_hppa_final_processing (void);
-
-#define DWARF2_LINE_MIN_INSN_LENGTH 4
 #endif /* OBJ_ELF */
 
 #define md_operand(x)
@@ -213,10 +211,18 @@ extern int hppa_regname_to_dw2regnum (ch
 #define DWARF2_LINE_MIN_INSN_LENGTH 4
 #define DWARF2_DEFAULT_RETURN_COLUMN 2
 #if TARGET_ARCH_SIZE == 64
-#define DWARF2_CIE_DATA_ALIGNMENT (-8)
+#define DWARF2_CIE_DATA_ALIGNMENT 8
+#define DWARF2_FDE_RELOC_SIZE 8
 #else
-#define DWARF2_CIE_DATA_ALIGNMENT (-4)
+#define DWARF2_CIE_DATA_ALIGNMENT 4
 #endif
+
+#if !(defined (OBJ_ELF) && (defined (TE_LINUX) || defined (TE_NetBSD)))
+/* Due to the way dynamic linking to personality functions is handled
+   on HP-UX, we need to have a read-write .eh_frame section.  */
+#define DWARF2_EH_FRAME_READ_ONLY 0
+#endif
+
 #endif
 
 #endif /* _TC_HPPA_H */
Index: gas/testsuite/gas/cfi/cfi-common-1.d
===================================================================
RCS file: /cvs/src/src/gas/testsuite/gas/cfi/cfi-common-1.d,v
retrieving revision 1.5
diff -u -3 -p -r1.5 cfi-common-1.d
--- gas/testsuite/gas/cfi/cfi-common-1.d	28 Jan 2008 15:15:31 -0000	1.5
+++ gas/testsuite/gas/cfi/cfi-common-1.d	17 Aug 2008 19:23:05 -0000
@@ -14,10 +14,11 @@ The section .eh_frame contains:
   DW_CFA_nop
   DW_CFA_nop
 
-00000014 00000018 00000018 FDE cie=00000000 pc=.*
+00000014 000000(18|1c|20) 00000018 FDE cie=00000000 pc=.*
   DW_CFA_advance_loc: 4 to .*
   DW_CFA_def_cfa: r0( \([er]ax\)|) ofs 16
-  DW_CFA_offset: r1( \((rdx|ecx)\)|) at cfa-8
+  DW_CFA_offset(_extended_sf|): r1( \((rdx|ecx)\)|) at cfa-8
   DW_CFA_advance_loc: 4 to .*
   DW_CFA_def_cfa_offset: 32
-  DW_CFA_offset: r2( \((rcx|edx)\)|) at cfa-24
+  DW_CFA_offset(_extended_sf|): r2( \((rcx|edx)\)|) at cfa-24
+#...
Index: gas/testsuite/gas/cfi/cfi-hppa-1.d
===================================================================
RCS file: /cvs/src/src/gas/testsuite/gas/cfi/cfi-hppa-1.d,v
retrieving revision 1.2
diff -u -3 -p -r1.2 cfi-hppa-1.d
--- gas/testsuite/gas/cfi/cfi-hppa-1.d	28 Jan 2008 15:15:31 -0000	1.2
+++ gas/testsuite/gas/cfi/cfi-hppa-1.d	17 Aug 2008 19:23:05 -0000
@@ -6,13 +6,13 @@ The section .eh_frame contains:
   Version:               1
   Augmentation:          "zR"
   Code alignment factor: 4
-  Data alignment factor: -[48]
+  Data alignment factor: [48]
   Return address column: 2
-  Augmentation data:     1b
+  Augmentation data:     1[bc]
 
   DW_CFA_def_cfa: r30 ofs 0
 
-00000014 00000018 00000018 FDE cie=00000000 pc=00000000..00000018
+00000014 000000(18|20) 00000018 FDE cie=00000000 pc=00000000..00000018
   DW_CFA_advance_loc: 8 to 00000008
   DW_CFA_def_cfa_register: r3
   DW_CFA_advance_loc: 4 to 0000000c
@@ -21,17 +21,16 @@ The section .eh_frame contains:
   DW_CFA_def_cfa_register: r30
   DW_CFA_nop
 
-00000030 00000018 00000034 FDE cie=00000000 pc=00000018..00000040
+0000003[08] 000000(18|20) 0000003[4c] FDE cie=00000000 pc=00000018..00000040
   DW_CFA_advance_loc: 12 to 00000024
   DW_CFA_def_cfa_register: r3
-  DW_CFA_offset: r2 at cfa-24
+  DW_CFA_offset_extended_sf: r2 at cfa-24
   DW_CFA_advance_loc: 24 to 0000003c
   DW_CFA_def_cfa_register: r30
   DW_CFA_nop
   DW_CFA_nop
-  DW_CFA_nop
 
-0000004c 00000010 00000050 FDE cie=00000000 pc=00000040..00000048
+000000[45]c 0000001[08] 000000[56]0 FDE cie=00000000 pc=00000040..00000048
   DW_CFA_nop
   DW_CFA_nop
   DW_CFA_nop
Index: gas/testsuite/gas/cfi/cfi.exp
===================================================================
RCS file: /cvs/src/src/gas/testsuite/gas/cfi/cfi.exp,v
retrieving revision 1.21
diff -u -3 -p -r1.21 cfi.exp
--- gas/testsuite/gas/cfi/cfi.exp	18 Feb 2008 21:05:07 -0000	1.21
+++ gas/testsuite/gas/cfi/cfi.exp	17 Aug 2008 19:23:05 -0000
@@ -80,13 +80,18 @@ if  { [istarget "i*86-*-*"] || [istarget
 }
 
 run_list_test "cfi-diag-1" ""
-run_dump_test "cfi-common-1"
-run_dump_test "cfi-common-2"
-run_dump_test "cfi-common-3"
-run_dump_test "cfi-common-4"
-run_dump_test "cfi-common-5"
 
-# MIPS doesn't support PC relative cfi directives
+# HPPA64 uses 64-bit relocations, which results in all of the dump
+# offset numbers not matching up.
+if { ![istarget "hppa64*-*"] } then {
+  run_dump_test "cfi-common-1"
+  run_dump_test "cfi-common-2"
+  run_dump_test "cfi-common-3"
+  run_dump_test "cfi-common-4"
+  run_dump_test "cfi-common-5"
+}
+
+# MIPS doesn't support PC relative cfi directives.
 if { ![istarget "mips*-*"] } then {
     run_dump_test "cfi-common-6"
 }

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[Richard Henderson]

John David Anglin wrote:
> I've appended an updated binutils change.  This adjusts the addend
> in tc-hppa.c and readelf.c to account for the fact that PA-RISC
> PCREL relocations are for symbol - PC - 8 + addend.

Gah.  What an annoying feature that is.  I've checked in the patch
with that change installed.

 > However, we still have some EH failures
> on linux.  On hppa64, we aren't failing the C cleanup tests but
> there are still a lot of g++ and libstdc++ EH failures.

Interesting that it works on hpux and not linux...  I thought we
were generating the same output on those two systems?


r~

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[John David Anglin]

>  > However, we still have some EH failures
> > on linux.  On hppa64, we aren't failing the C cleanup tests but
> > there are still a lot of g++ and libstdc++ EH failures.
> 
> Interesting that it works on hpux and not linux...  I thought we
> were generating the same output on those two systems?

I believe the C cleanup tests are also passing on linux using
the CFI directions.

As far as the EH output goes, we have been using pc-relative
relocations on linux for some time.  We use an indirect pc-relative
encoding to handle the plabel needed for the call to the personality
function.

We haven't been able to use pc-relative relocations with HP-UX
because of the segmented memory space.  So, we used aligned and
absptr encoding there.

I will do some more comparisons of the difference between the CFI
directives and the old encoding this weekend.  I know simply
interchanging libgcc_s.so fixed some failures before.  As I understand
it, the CFI directives are not being used yet with g++.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[Richard Henderson]

John David Anglin wrote:
> We haven't been able to use pc-relative relocations with HP-UX
> because of the segmented memory space.  So, we used aligned and
> absptr encoding there.

I don't suppose the HP linker supports R_PARISC_SEGREL32 at
an unaligned address?  If so, you could fairly easily arrange
to use DW_EH_PE_textrel as the encoding for the function addrs.

> I will do some more comparisons of the difference between the CFI
> directives and the old encoding this weekend.  I know simply
> interchanging libgcc_s.so fixed some failures before.  As I understand
> it, the CFI directives are not being used yet with g++.

Correct.  Which means that if you see C++ failures, then libgcc
itself was miscompiled.


r~

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[John David Anglin]

> I don't suppose the HP linker supports R_PARISC_SEGREL32 at
> an unaligned address?  If so, you could fairly easily arrange
> to use DW_EH_PE_textrel as the encoding for the function addrs.

Don't know but I doubt it.  I would expect the situation is the
same as for ia64.

It is possible that pc-relative relocations might work if .eh_frame
was read-only for hppa64.  I have checked and found that plabels can
be in a read-only in both executables and shared libraries.  However,
I'm still not sure that the EH processing will work for shared
libraries.  Also, putting the EH data in a read-only section would
probably break existing code.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[Richard Henderson]

John David Anglin wrote:
>> I don't suppose the HP linker supports R_PARISC_SEGREL32 at
>> an unaligned address?  If so, you could fairly easily arrange
>> to use DW_EH_PE_textrel as the encoding for the function addrs.
> 
> Don't know but I doubt it.  I would expect the situation is the
> same as for ia64.
> 
> It is possible that pc-relative relocations might work if .eh_frame
> was read-only for hppa64.  I have checked and found that plabels can
> be in a read-only in both executables and shared libraries.  However,
> I'm still not sure that the EH processing will work for shared
> libraries.  Also, putting the EH data in a read-only section would
> probably break existing code.

I wasn't considering making the EH data read-only, I was only
considering reducing the number of dynamic relocations needed.

At present, the absolute addresses mean that you need dynamic
fixups for shared libraries, and for executables when the segments
used aren't what the static linker selected.  If segment-relative
relocations were used, you'd only have one dynamic relocation --
the one that records the base of the segment in
__register_frame_info_bases.


r~

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[John David Anglin]

> I wasn't considering making the EH data read-only, I was only
> considering reducing the number of dynamic relocations needed.

Ok.

> At present, the absolute addresses mean that you need dynamic
> fixups for shared libraries, and for executables when the segments
> used aren't what the static linker selected.  If segment-relative
> relocations were used, you'd only have one dynamic relocation --
> the one that records the base of the segment in
> __register_frame_info_bases.

I'll look at this.  There isn't a direct to generate SEGREL relocations
although it looks easy to tweak gas to do it (DIR64 relocations could
be converted to SEGREL64 in .eh_frame).  It's not clear to me how the
segment base would be recorded.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[Richard Henderson]

John David Anglin wrote:
> I'll look at this.  There isn't a direct to generate SEGREL relocations
> although it looks easy to tweak gas to do it (DIR64 relocations could
> be converted to SEGREL64 in .eh_frame). 

I strongly discourage converting relocations based on the section.
The fact that this already happens for DIR32 I think is a mistake.
You should instead use a special directive (like alpha's .gprel)
or annotations next to the symbol (like ia64's @segrel(foo)).

 > It's not clear to me how the segment base would be recorded.

 From my scant reading of include/elf/hppa.h, it appears that the
"segments" are not really related to what we think of as the runtime
segments at all, but are specified to the linker with the
R_PARISC_SEGBASE relocation.  So you can pick some well-known
system symbol such as _text and use that.  Hopefully there's some
symbol that exists for both programs and shared libraries.


r~

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[John David Anglin]

> I will do some more comparisons of the difference between the CFI
> directives and the old encoding this weekend.

I compared the .eh_frame's generated on hppa-linux by adding
"-fno-dwarf2-cfi-asm -fnon-call-exceptions" to the default compilation
options for unwind-dw2.c to the default options.

--- unwind-dw2_s_nc.wf  2008-08-23 13:22:37.000000000 -0400
+++ unwind-dw2_s.wf     2008-08-23 13:19:50.000000000 -0400
@@ -3,7 +3,7 @@
 00000000 00000010 00000000 CIE
    Version:               1
    Augmentation:          "zR"
-  Code alignment factor: 1
+  Code alignment factor: 4
   Data alignment factor: 4
   Return address column: 2
   Augmentation data:     1b
@@ -57,39 +57,39 @@
	 
 000000c8 00000018 000000cc FDE cie=00000000 pc=000000a8..000000d8
   DW_CFA_advance_loc: 8 to 000000b0
-  DW_CFA_def_cfa_offset_sf: -64
+  DW_CFA_def_cfa_offset_sf: -16
+  DW_CFA_advance_loc: 20 to 000000c4
   DW_CFA_offset: r4 at cfa+0
   DW_CFA_offset_extended_sf: r2 at cfa-20
   DW_CFA_nop
   DW_CFA_nop
-  DW_CFA_nop

 000000e4 00000018 000000e8 FDE cie=00000000 pc=000000d8..00000144
   DW_CFA_advance_loc: 12 to 000000e4
-  DW_CFA_def_cfa_offset_sf: -64
+  DW_CFA_def_cfa_offset_sf: -16

The first difference is the code alignment factor.  It seems this
is hard-coded to 1 in dwarf2out.c.

It looks like the offset of -16 is wrong:

        .cfi_startproc
_Unwind_DeleteException:
	.PROC
	.CALLINFO FRAME=64,CALLS,SAVE_RP,ENTRY_GR=3
	.ENTRY
	stw %r2,-20(%r30)
	stwm %r4,64(%r30)
	.cfi_def_cfa_offset -16

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[John David Anglin]

> @@ -57,39 +57,39 @@
> 	 
>  000000c8 00000018 000000cc FDE cie=00000000 pc=000000a8..000000d8
>    DW_CFA_advance_loc: 8 to 000000b0
> -  DW_CFA_def_cfa_offset_sf: -64
> +  DW_CFA_def_cfa_offset_sf: -16
> +  DW_CFA_advance_loc: 20 to 000000c4
>    DW_CFA_offset: r4 at cfa+0
>    DW_CFA_offset_extended_sf: r2 at cfa-20
>    DW_CFA_nop
>    DW_CFA_nop
> -  DW_CFA_nop
> 
>  000000e4 00000018 000000e8 FDE cie=00000000 pc=000000d8..00000144
>    DW_CFA_advance_loc: 12 to 000000e4
> -  DW_CFA_def_cfa_offset_sf: -64
> +  DW_CFA_def_cfa_offset_sf: -16
> 
> The first difference is the code alignment factor.  It seems this
> is hard-coded to 1 in dwarf2out.c.
> 
> It looks like the offset of -16 is wrong:
> 
>         .cfi_startproc
> _Unwind_DeleteException:
> 	.PROC
> 	.CALLINFO FRAME=64,CALLS,SAVE_RP,ENTRY_GR=3
> 	.ENTRY
> 	stw %r2,-20(%r30)
> 	stwm %r4,64(%r30)
> 	.cfi_def_cfa_offset -16

Comparatively, with -fno-dwarf2-asm, the .eh_frame output is

        .byte   0x13
	.sleb128 -16

So, both bits of code output an "offset" of -16.  It seems gas doesn't
have a .cfi_def_cfa_offset_sf directive, yet the ".cfi_def_cfa_offset -16"
encodes the value with DW_CFA_def_cfa_offset_sf when the value is negative.

I see the following code in dw2gencfi.c:

    case DW_CFA_def_cfa_offset:
      offset = insn->u.i;
      if (offset < 0)
	{
	  out_one (DW_CFA_def_cfa_offset_sf);
	  out_sleb128 (offset / DWARF2_CIE_DATA_ALIGNMENT);
	}
      else
        {
	  out_one (DW_CFA_def_cfa_offset);
	  out_uleb128 (offset);
	}

As can be seen, gas is dividing DWARF2_CIE_DATA_ALIGNMENT when the
offset is negative.  GCC is also dividing by the data alignment.
So, which is wrong?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[Richard Henderson]

[-- Attachment #1: Type: text/plain, Size: 254 bytes --]

John David Anglin wrote:
> As can be seen, gas is dividing DWARF2_CIE_DATA_ALIGNMENT when the
> offset is negative.  GCC is also dividing by the data alignment.
> So, which is wrong?

Gcc is wrong.  Here's a patch to avoid doing the division twice.


r~

[-- Attachment #2: z.txt --]
[-- Type: text/plain, Size: 4595 bytes --]

--- dwarf2out.c	(revision 139547)
+++ dwarf2out.c	(local)
@@ -776,23 +776,16 @@ lookup_cfa_1 (dw_cfi_ref cfi, dw_cfa_loc
   switch (cfi->dw_cfi_opc)
     {
     case DW_CFA_def_cfa_offset:
-      loc->offset = cfi->dw_cfi_oprnd1.dw_cfi_offset;
-      break;
     case DW_CFA_def_cfa_offset_sf:
-      loc->offset
-	= cfi->dw_cfi_oprnd1.dw_cfi_offset * DWARF_CIE_DATA_ALIGNMENT;
+      loc->offset = cfi->dw_cfi_oprnd1.dw_cfi_offset;
       break;
     case DW_CFA_def_cfa_register:
       loc->reg = cfi->dw_cfi_oprnd1.dw_cfi_reg_num;
       break;
     case DW_CFA_def_cfa:
-      loc->reg = cfi->dw_cfi_oprnd1.dw_cfi_reg_num;
-      loc->offset = cfi->dw_cfi_oprnd2.dw_cfi_offset;
-      break;
     case DW_CFA_def_cfa_sf:
       loc->reg = cfi->dw_cfi_oprnd1.dw_cfi_reg_num;
-      loc->offset
-	= cfi->dw_cfi_oprnd2.dw_cfi_offset * DWARF_CIE_DATA_ALIGNMENT;
+      loc->offset = cfi->dw_cfi_oprnd2.dw_cfi_offset;
       break;
     case DW_CFA_def_cfa_expression:
       get_cfa_from_loc_descr (loc, cfi->dw_cfi_oprnd1.dw_cfi_loc);
@@ -891,20 +884,14 @@ def_cfa_1 (const char *label, dw_cfa_loc
   if (loc.reg == old_cfa.reg && !loc.indirect)
     {
       /* Construct a "DW_CFA_def_cfa_offset <offset>" instruction, indicating
-	 the CFA register did not change but the offset did.  */
+	 the CFA register did not change but the offset did.  The data 
+	 factoring for DW_CFA_def_cfa_offset_sf happens in output_cfi, or
+	 in the assembler via the .cfi_def_cfa_offset directive.  */
       if (loc.offset < 0)
-	{
-	  HOST_WIDE_INT f_offset = loc.offset / DWARF_CIE_DATA_ALIGNMENT;
-	  gcc_assert (f_offset * DWARF_CIE_DATA_ALIGNMENT == loc.offset);
-
-	  cfi->dw_cfi_opc = DW_CFA_def_cfa_offset_sf;
-	  cfi->dw_cfi_oprnd1.dw_cfi_offset = f_offset;
-	}
+	cfi->dw_cfi_opc = DW_CFA_def_cfa_offset_sf;
       else
-	{
-	  cfi->dw_cfi_opc = DW_CFA_def_cfa_offset;
-	  cfi->dw_cfi_oprnd1.dw_cfi_offset = loc.offset;
-	}
+	cfi->dw_cfi_opc = DW_CFA_def_cfa_offset;
+      cfi->dw_cfi_oprnd1.dw_cfi_offset = loc.offset;
     }
 
 #ifndef MIPS_DEBUGGING_INFO  /* SGI dbx thinks this means no offset.  */
@@ -924,22 +911,15 @@ def_cfa_1 (const char *label, dw_cfa_loc
     {
       /* Construct a "DW_CFA_def_cfa <register> <offset>" instruction,
 	 indicating the CFA register has changed to <register> with
-	 the specified offset.  */
+	 the specified offset.  The data factoring for DW_CFA_def_cfa_sf
+	 happens in output_cfi, or in the assembler via the .cfi_def_cfa
+	 directive.  */
       if (loc.offset < 0)
-	{
-	  HOST_WIDE_INT f_offset = loc.offset / DWARF_CIE_DATA_ALIGNMENT;
-	  gcc_assert (f_offset * DWARF_CIE_DATA_ALIGNMENT == loc.offset);
-
-	  cfi->dw_cfi_opc = DW_CFA_def_cfa_sf;
-	  cfi->dw_cfi_oprnd1.dw_cfi_reg_num = loc.reg;
-	  cfi->dw_cfi_oprnd2.dw_cfi_offset = f_offset;
-	}
+	cfi->dw_cfi_opc = DW_CFA_def_cfa_sf;
       else
-	{
-	  cfi->dw_cfi_opc = DW_CFA_def_cfa;
-	  cfi->dw_cfi_oprnd1.dw_cfi_reg_num = loc.reg;
-	  cfi->dw_cfi_oprnd2.dw_cfi_offset = loc.offset;
-	}
+	cfi->dw_cfi_opc = DW_CFA_def_cfa;
+      cfi->dw_cfi_oprnd1.dw_cfi_reg_num = loc.reg;
+      cfi->dw_cfi_oprnd2.dw_cfi_offset = loc.offset;
     }
   else
     {
@@ -2552,6 +2532,8 @@ static void
 output_cfi (dw_cfi_ref cfi, dw_fde_ref fde, int for_eh)
 {
   unsigned long r;
+  HOST_WIDE_INT off;
+
   if (cfi->dw_cfi_opc == DW_CFA_advance_loc)
     dw2_asm_output_data (1, (cfi->dw_cfi_opc
 			     | (cfi->dw_cfi_oprnd1.dw_cfi_offset & 0x3f)),
@@ -2622,12 +2604,20 @@ output_cfi (dw_cfi_ref cfi, dw_fde_ref f
 	  break;
 
 	case DW_CFA_offset_extended_sf:
-	case DW_CFA_def_cfa_sf:
 	  r = DWARF2_FRAME_REG_OUT (cfi->dw_cfi_oprnd1.dw_cfi_reg_num, for_eh);
 	  dw2_asm_output_data_uleb128 (r, NULL);
 	  dw2_asm_output_data_sleb128 (cfi->dw_cfi_oprnd2.dw_cfi_offset, NULL);
 	  break;
 
+	case DW_CFA_def_cfa_sf:
+	  r = DWARF2_FRAME_REG_OUT (cfi->dw_cfi_oprnd1.dw_cfi_reg_num, for_eh);
+	  dw2_asm_output_data_uleb128 (r, NULL);
+
+	  off = cfi->dw_cfi_oprnd2.dw_cfi_offset;
+	  gcc_assert (off % DWARF_CIE_DATA_ALIGNMENT == 0);
+	  dw2_asm_output_data_sleb128 (off / DWARF_CIE_DATA_ALIGNMENT, NULL);
+	  break;
+
 	case DW_CFA_restore_extended:
 	case DW_CFA_undefined:
 	case DW_CFA_same_value:
@@ -2649,7 +2639,9 @@ output_cfi (dw_cfi_ref cfi, dw_fde_ref f
 	  break;
 
 	case DW_CFA_def_cfa_offset_sf:
-	  dw2_asm_output_data_sleb128 (cfi->dw_cfi_oprnd1.dw_cfi_offset, NULL);
+	  off = cfi->dw_cfi_oprnd1.dw_cfi_offset;
+	  gcc_assert (off % DWARF_CIE_DATA_ALIGNMENT == 0);
+	  dw2_asm_output_data_sleb128 (off / DWARF_CIE_DATA_ALIGNMENT, NULL);
 	  break;
 
 	case DW_CFA_GNU_window_save:

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[John David Anglin]

> Gcc is wrong.  Here's a patch to avoid doing the division twice.

I'll give it a try.  I had tried the simple fix to multiply by
DWARF_CIE_DATA_ALIGNMENT in the output for DW_CFA_def_cfa_offset_sf.
This fixed the the linux EH fails using CFI directives.

I'm now pondering what to do about hppa64-hpux.  I have the sense
that pc-relative relocations might work if .eh_frame is read-only.
I think the relocated value will then point to the correct place
for code in shared libraries.  Making .eh_frame read-only would
have to be forced.  I believe that we would need the same pc-relative
indirect trick as we currently use on linux to get the plabel out of
.eh_frame (see patch below).  This looks like the easiest approach
if it works.

The other alternative is to use SEGREL relocations.  It looks like
the assembler CFI directives can't support this.  We would also
need to define a way to indicate to the assembler that we want a
SEGREL relocation.  It looks like the symbol __text_seg provides
the text base, but it is a dynamic symbol.  crtstuff.c probably
would need some modification to pass the correct text and data bases.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Index: dwarf2out.c
===================================================================
--- dwarf2out.c	(revision 139524)
+++ dwarf2out.c	(working copy)
@@ -145,12 +145,12 @@
     return false;
 
   /* Make sure the personality encoding is one the assembler can support.
-     In particular, aligned addresses can't be handled.  */
+     In particular, indirect and aligned addresses can't be handled.  */
   enc = ASM_PREFERRED_EH_DATA_FORMAT (/*code=*/2,/*global=*/1);
-  if ((enc & 0x70) != 0 && (enc & 0x70) != DW_EH_PE_pcrel)
+  if ((enc & 0xF0) != 0 && (enc & 0xF0) != DW_EH_PE_pcrel)
     return false;
   enc = ASM_PREFERRED_EH_DATA_FORMAT (/*code=*/0,/*global=*/0);
-  if ((enc & 0x70) != 0 && (enc & 0x70) != DW_EH_PE_pcrel)
+  if ((enc & 0xF0) != 0 && (enc & 0xF0) != DW_EH_PE_pcrel)
     return false;
 
   return true;

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[Richard Henderson]

John David Anglin wrote:
> Making .eh_frame read-only would
> have to be forced.  I believe that we would need the same pc-relative
> indirect trick as we currently use on linux to get the plabel out of
> .eh_frame (see patch below).

The patch is wrong.  We handle the indirect part inside the compiler
before we pass it on to the assembler.

But if you can get pc-relative relocs to those plabels, it would be
the easiest thing to do.  Far better than playing with segment bases.

> It looks like the symbol __text_seg provides
> the text base, but it is a dynamic symbol.  crtstuff.c probably
> would need some modification to pass the correct text and data bases.

Perhaps you could force __text_seg to be .hidden.  I don't know if
the hpux linker supports that sort of thing though...


r~

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[John David Anglin]

> But if you can get pc-relative relocs to those plabels, it would be
> the easiest thing to do.  Far better than playing with segment bases.
> 
> > It looks like the symbol __text_seg provides
> > the text base, but it is a dynamic symbol.  crtstuff.c probably
> > would need some modification to pass the correct text and data bases.
> 
> Perhaps you could force __text_seg to be .hidden.  I don't know if
> the hpux linker supports that sort of thing though...

The segment bases are a bit of a problem.  It appears that they must
be obtained from the dynamic loader using dlget() or dlmodinfo() calls.
The later provides a load module descriptor for an instruction pointer.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: update dwarf2 asm unwind info [hppa64-*-* failures]

[John David Anglin]

> 
> John David Anglin wrote:
> > Making .eh_frame read-only would
> > have to be forced.  I believe that we would need the same pc-relative
> > indirect trick as we currently use on linux to get the plabel out of
> > .eh_frame (see patch below).
> 
> The patch is wrong.  We handle the indirect part inside the compiler
> before we pass it on to the assembler.

Ok, I see.  It handles the case in a manner similar to that in
dwarf2asm.c.  I will recheck but I believe there was a problem in
using dw2_force_const_mem() for the indirection to a plabel.  We
handle the output ourself using ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX
when not using CFI directives.

Trying to make .eh_frame read-only didn't work on hppa64-hpux.

So, we have to deal with the assembler using pc-relative relocations
for the FDE's until I see if segment relative relocations can
be made to work.  Possibly, DIFF_EXPR_OK shouldn't be defined although
I'm hesitant to give up completely on it as it works within a
segment.  However, it still should be possible to generate pc-relative
data using the obscure $PIC_pcrel$0 semantics.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [committed] Fix previous change to pa.c

[John David Anglin]

> The enclosed fixes compile errors instroduced in the previous change
> to the file.  Tested on hppa-unknown-linux-gnu.  Committed to trunk.

I was a bit too quick.  This cleans up the declaration.  Tested on
hppa-unknown-linux-gnu with compile check.  Committed to trunk.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2009-08-02  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* pa.c (pa_promote_function_mode): Remove ATTRIBUTE_UNUSED from
	declaration arguments.

Index: config/pa/pa.c
===================================================================
--- config/pa/pa.c	(revision 150354)
+++ config/pa/pa.c	(working copy)
@@ -159,11 +159,9 @@
 					   enum machine_mode,
 					   secondary_reload_info *);
 static void pa_extra_live_on_entry (bitmap);
-static enum machine_mode pa_promote_function_mode (const_tree ATTRIBUTE_UNUSED,
-						   enum machine_mode,
-						   int * ATTRIBUTE_UNUSED,
-						   const_tree ATTRIBUTE_UNUSED,
-						   int for_return);
+static enum machine_mode pa_promote_function_mode (const_tree,
+						   enum machine_mode, int *,
+						   const_tree, int);
 
 /* The following extra sections are only used for SOM.  */
 static GTY(()) section *som_readonly_data_section;

Re: [committed] Shorten non PIC PA 1.1 calls on hppa-hpux

[John David Anglin]

> The enclosed change shortens long PA 1.x calls when not generating PIC
> code.  In this case, we can just use space register sr4 for the be and
> bel branch instructions, avoiding two instructions to load the space
> register of the call destination.  This is always a stub in the current
> space.

Sigh, I was wrong about there always being a stub in the current space.
With the above change, we get an ICE building the current trunk.  The
attached patch revises the change to only use the sr4 short form when
the call target binds local.  The problem affects 32-bit hppa*-*-hpux*.

Current change was tested on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11,
trunk and 4.4 branches with no regressions.  Committed to trunk and 4.4.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2009-11-24  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	* pa.c (output_call): Only use sr4 for long interspace calls if
	call binds local and generating non PIC code.
	(attr_length_call): Adjust length calculation for above.

Index: config/pa/pa.c
===================================================================
--- config/pa/pa.c	(revision 152888)
+++ config/pa/pa.c	(working copy)
@@ -7437,7 +7437,7 @@
     {
       length += 20;
 
-      if (!TARGET_PA_20 && !TARGET_NO_SPACE_REGS && flag_pic)
+      if (!TARGET_PA_20 && !TARGET_NO_SPACE_REGS && (!local_call || flag_pic))
 	length += 8;
     }
 
@@ -7457,7 +7457,7 @@
 	  if (!sibcall)
 	    length += 8;
 
-	  if (!TARGET_NO_SPACE_REGS && flag_pic)
+	  if (!TARGET_NO_SPACE_REGS && (!local_call || flag_pic))
 	    length += 8;
 	}
     }
@@ -7654,7 +7654,7 @@
 		  if (!sibcall && !TARGET_PA_20)
 		    {
 		      output_asm_insn ("{bl|b,l} .+8,%%r2", xoperands);
-		      if (TARGET_NO_SPACE_REGS)
+		      if (TARGET_NO_SPACE_REGS || (local_call && !flag_pic))
 			output_asm_insn ("addi 8,%%r2,%%r2", xoperands);
 		      else
 			output_asm_insn ("addi 16,%%r2,%%r2", xoperands);
@@ -7679,20 +7679,20 @@
 		}
 	      else
 		{
-		  if (!TARGET_NO_SPACE_REGS && flag_pic)
+		  if (!TARGET_NO_SPACE_REGS && (!local_call || flag_pic))
 		    output_asm_insn ("ldsid (%%r1),%%r31\n\tmtsp %%r31,%%sr0",
 				     xoperands);
 
 		  if (sibcall)
 		    {
-		      if (TARGET_NO_SPACE_REGS || !flag_pic)
+		      if (TARGET_NO_SPACE_REGS || (local_call && !flag_pic))
 			output_asm_insn ("be 0(%%sr4,%%r1)", xoperands);
 		      else
 			output_asm_insn ("be 0(%%sr0,%%r1)", xoperands);
 		    }
 		  else
 		    {
-		      if (TARGET_NO_SPACE_REGS || !flag_pic)
+		      if (TARGET_NO_SPACE_REGS || (local_call && !flag_pic))
 			output_asm_insn ("ble 0(%%sr4,%%r1)", xoperands);
 		      else
 			output_asm_insn ("ble 0(%%sr0,%%r1)", xoperands);

Re: [PATCH] Fix visibility of constructors/destructors with -fwhole-program

[John David Anglin]

> This patch fixes PR middle-end/41674.  With -fwhole-program, the
> constructor _GLOBAL__I_65535_0_main has its public flag turned off
> by function_and_variable_visibility and thereby made local.  However,
> these symbols need to be global for collect2 to arrange to call them.
> 
> Tested on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11.

Here is take 2.  The first version was deemed overkill and Richard suggested
using DECL_PRESERVE_P.

Tested on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11 with no regressions.

Ok for trunk?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

2010-01-02  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

	PR middle-end/41674
	* cgraphunit.c (cgraph_build_static_cdtor): If target doesn't have
	cdtors, set DECL_PRESERVE_P.
	* ipa.c (cgraph_externally_visible_p): Return true if declaration
	should be preseved.

Index: cgraphunit.c
===================================================================
--- cgraphunit.c	(revision 157617)
+++ cgraphunit.c	(working copy)
@@ -1946,7 +1946,11 @@
   DECL_ARTIFICIAL (decl) = 1;
   DECL_NO_INSTRUMENT_FUNCTION_ENTRY_EXIT (decl) = 1;
   DECL_SAVED_TREE (decl) = body;
-  TREE_PUBLIC (decl) = ! targetm.have_ctors_dtors;
+  if (!targetm.have_ctors_dtors)
+    {
+      TREE_PUBLIC (decl) = 1;
+      DECL_PRESERVE_P (decl) = 1;
+    }
   DECL_UNINLINABLE (decl) = 1;
 
   DECL_INITIAL (decl) = make_node (BLOCK);
Index: ipa.c
===================================================================
--- ipa.c	(revision 157617)
+++ ipa.c	(working copy)
@@ -317,6 +317,8 @@
     return false;
   if (!whole_program)
     return true;
+  if (DECL_PRESERVE_P (node->decl))
+    return true;
   /* COMDAT functions must be shared only if they have address taken,
      otherwise we can produce our own private implementation with
      -fwhole-program.  */

Re: [PATCH] Fix visibility of constructors/destructors with -fwhole-program

[Richard Guenther]

On Sat, 27 Mar 2010, John David Anglin wrote:

> > This patch fixes PR middle-end/41674.  With -fwhole-program, the
> > constructor _GLOBAL__I_65535_0_main has its public flag turned off
> > by function_and_variable_visibility and thereby made local.  However,
> > these symbols need to be global for collect2 to arrange to call them.
> > 
> > Tested on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11.
> 
> Here is take 2.  The first version was deemed overkill and Richard suggested
> using DECL_PRESERVE_P.
> 
> Tested on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11 with no regressions.
> 
> Ok for trunk?

Ok.

Thanks,
Richard.

Re: [PATCH] Fix visibility of constructors/destructors with -fwhole-program

[Jan Hubicka]

> > This patch fixes PR middle-end/41674.  With -fwhole-program, the
> > constructor _GLOBAL__I_65535_0_main has its public flag turned off
> > by function_and_variable_visibility and thereby made local.  However,
> > these symbols need to be global for collect2 to arrange to call them.
> > 
> > Tested on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11.
> 
> Here is take 2.  The first version was deemed overkill and Richard suggested
> using DECL_PRESERVE_P.
> 
> Tested on hppa2.0w-hp-hpux11.11 and hppa64-hp-hpux11.11 with no regressions.
> 
> Ok for trunk?

Hmm, I see it was applied already, but this imply that attribute used on functions
now imply externally_visible, while on variables it does not.

I am not sure what would be best behaviour of used WRT whole-program.  I guess
the symbol should be still brought static, but the mangling (i.e. .1234) should
not be applied so asm statements from other source files (within same LTO unit)
can refer to it. 

I guess it is resonable to want something like the following work:

t1.c:
__attribute__ ((used)) int q;
__attribute__ ((used))
void
t()
{
}

t2.c:
main()
{
 int q;
  asm("call t; movl $q,%0":"=r"(q));
  return q;
}

and expect this to link properly -fwhole-program or not and I guess also to
make -fwhole-program privatize both q and t unless externally_visible is given.

At present (before this patch) we seem to get 't' right (i.e. it is static and
with original name), but we do not output q.  If this seems like intended
behaviour, I guess I can fix this as well as make this hppa fix to attach
externally visible attribute (or simply force externally visible flag on the
cgraph node that should have same effect)

Honza

Re: [PATCH] Fix visibility of constructors/destructors with

[John David Anglin]

> Hmm, I see it was applied already, but this imply that attribute used on functions
> now imply externally_visible, while on variables it does not.

It only implies externally_visible with -fwhole-program if the declaration
was originally externally visible.

The documentation for attribute used says:

@item used
@cindex @code{used} attribute.
This attribute, attached to a function, means that code must be emitted
for the function even if it appears that the function is not referenced.
This is useful, for example, when the function is referenced only in
inline assembly.

As can be seen, there is no mention on its effect on variables and
as far as I can tell the change didn't alter the visibility of variables
given that cgraph_externally_visible_p is not currently called for
variables.

> I am not sure what would be best behaviour of used WRT whole-program.  I guess
> the symbol should be still brought static, but the mangling (i.e. .1234) should
> not be applied so asm statements from other source files (within same LTO unit)
> can refer to it. 
> 
> I guess it is resonable to want something like the following work:
> 
> t1.c:
> __attribute__ ((used)) int q;
> __attribute__ ((used))
> void
> t()
> {
> }
> 
> t2.c:
> main()
> {
>  int q;
>   asm("call t; movl $q,%0":"=r"(q));
>   return q;
> }
> 
> and expect this to link properly -fwhole-program or not and I guess also to
> make -fwhole-program privatize both q and t unless externally_visible is given.
>
> At present (before this patch) we seem to get 't' right (i.e. it is static and
> with original name), but we do not output q.  If this seems like intended
> behaviour, I guess I can fix this as well as make this hppa fix to attach
> externally visible attribute (or simply force externally visible flag on the
> cgraph node that should have same effect)

The only reason I didn't try using the externally visible attribute was
attaching the attribute seemed tricky.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] Fix visibility of constructors/destructors with

[Jan Hubicka]

> > Hmm, I see it was applied already, but this imply that attribute used on functions
> > now imply externally_visible, while on variables it does not.
> 
> It only implies externally_visible with -fwhole-program if the declaration
> was originally externally visible.
> 
> The documentation for attribute used says:
> 
> @item used
> @cindex @code{used} attribute.
> This attribute, attached to a function, means that code must be emitted
> for the function even if it appears that the function is not referenced.
> This is useful, for example, when the function is referenced only in
> inline assembly.

Well, the manual says nothing about external visibility.  It only says that you
can reffer it from assembly (as given in the example bellow).  I would say that
for -fwhole-program we can still bring it local as long as all the assembly
refering it is part of the unit and otherwise user is required to add the
externally visible attribute same way as he has to add to anything else refered
outside the unit compiled with -fwhole-program.

"used" attribute is IMO intended primarily for static variables/functions
refered from inline assembly.  For functions referred from assembly in .s unit
no decoration is needed.

> 
> As can be seen, there is no mention on its effect on variables and
> as far as I can tell the change didn't alter the visibility of variables
> given that cgraph_externally_visible_p is not currently called for
> variables.

The documentation does not speak about variables, but since unit-at-a-time was
introduced we support both (i.e. the unused/used attributes on both variables
and functions) and they should behave symmetricaly. This change breaks the
symmetry.

Honza
> 
> > I am not sure what would be best behaviour of used WRT whole-program.  I guess
> > the symbol should be still brought static, but the mangling (i.e. .1234) should
> > not be applied so asm statements from other source files (within same LTO unit)
> > can refer to it. 
> > 
> > I guess it is resonable to want something like the following work:
> > 
> > t1.c:
> > __attribute__ ((used)) int q;
> > __attribute__ ((used))
> > void
> > t()
> > {
> > }
> > 
> > t2.c:
> > main()
> > {
> >  int q;
> >   asm("call t; movl $q,%0":"=r"(q));
> >   return q;
> > }
> > 
> > and expect this to link properly -fwhole-program or not and I guess also to
> > make -fwhole-program privatize both q and t unless externally_visible is given.
> >
> > At present (before this patch) we seem to get 't' right (i.e. it is static and
> > with original name), but we do not output q.  If this seems like intended
> > behaviour, I guess I can fix this as well as make this hppa fix to attach
> > externally visible attribute (or simply force externally visible flag on the
> > cgraph node that should have same effect)
> 
> The only reason I didn't try using the externally visible attribute was
> attaching the attribute seemed tricky.
> 
> Dave
> -- 
> J. David Anglin                                  dave.anglin@nrc-cnrc.gc.ca
> National Research Council of Canada              (613) 990-0752 (FAX: 952-6602)

Re: [PATCH] Fix visibility of constructors/destructors with

[Richard Guenther]

On Sat, 27 Mar 2010, Jan Hubicka wrote:

> > > Hmm, I see it was applied already, but this imply that attribute used on functions
> > > now imply externally_visible, while on variables it does not.
> > 
> > It only implies externally_visible with -fwhole-program if the declaration
> > was originally externally visible.
> > 
> > The documentation for attribute used says:
> > 
> > @item used
> > @cindex @code{used} attribute.
> > This attribute, attached to a function, means that code must be emitted
> > for the function even if it appears that the function is not referenced.
> > This is useful, for example, when the function is referenced only in
> > inline assembly.
> 
> Well, the manual says nothing about external visibility.  It only says that you
> can reffer it from assembly (as given in the example bellow).  I would say that
> for -fwhole-program we can still bring it local as long as all the assembly
> refering it is part of the unit and otherwise user is required to add the
> externally visible attribute same way as he has to add to anything else refered
> outside the unit compiled with -fwhole-program.
> 
> "used" attribute is IMO intended primarily for static variables/functions
> refered from inline assembly.  For functions referred from assembly in .s unit
> no decoration is needed.

Well, I think "used" means used in ways not visible to the compiler.
So I think making that imply "externally_visible" is reasonable
(and as we can't do anything useful with "used" things not bringing
it local with -fwhole-program shouldn't be something to worry about).

But yes, the change should probably be applied to variables as well.

Richard.

Re: [PATCH] Fix visibility of constructors/destructors with

[Jan Hubicka]

> On Sat, 27 Mar 2010, Jan Hubicka wrote:
> 
> > > > Hmm, I see it was applied already, but this imply that attribute used on functions
> > > > now imply externally_visible, while on variables it does not.
> > > 
> > > It only implies externally_visible with -fwhole-program if the declaration
> > > was originally externally visible.
> > > 
> > > The documentation for attribute used says:
> > > 
> > > @item used
> > > @cindex @code{used} attribute.
> > > This attribute, attached to a function, means that code must be emitted
> > > for the function even if it appears that the function is not referenced.
> > > This is useful, for example, when the function is referenced only in
> > > inline assembly.
> > 
> > Well, the manual says nothing about external visibility.  It only says that you
> > can reffer it from assembly (as given in the example bellow).  I would say that
> > for -fwhole-program we can still bring it local as long as all the assembly
> > refering it is part of the unit and otherwise user is required to add the
> > externally visible attribute same way as he has to add to anything else refered
> > outside the unit compiled with -fwhole-program.
> > 
> > "used" attribute is IMO intended primarily for static variables/functions
> > refered from inline assembly.  For functions referred from assembly in .s unit
> > no decoration is needed.
> 
> Well, I think "used" means used in ways not visible to the compiler.
> So I think making that imply "externally_visible" is reasonable
> (and as we can't do anything useful with "used" things not bringing
> it local with -fwhole-program shouldn't be something to worry about).

We can still e.g. emit IP relative relocations for it in PIC libraries etc.

But since not bringing used symbols local is conservative thing to do, I am fine with that.
If we won't explicitly document this behaviour we can still later make thing more aggressive if we
find use for this.  I am not sure how many real uses ((used)) attribute has in code that cares
about performance.

Honza
> 
> But yes, the change should probably be applied to variables as well.
> 
> Richard.

Reload patch for PA call rewrite.

[John David Anglin]

This patch is needed for the PA call rewrite.  It simply makes the
arg pointer live if it is used in the mem substitution being done
by reload.  It obviously should be live but never matter because I
doubt anyone has used a register that is not call clobbered for the
arg pointer.  The same might apply to the frame pointer but there is
another mechanism to determine when it is needed.

Tested on hppa64-hp-hpux11*, hppa2.0w-hp-hpux11* and hppa-unknown-linux-gnu
with no regressions.

Ok for main?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-10-23  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* reload1.c (reload): Make the arg pointer register live if the memory
	address that is used to eliminate a pseudo mentions it.

Index: reload1.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/reload1.c,v
retrieving revision 1.358
diff -u -3 -p -r1.358 reload1.c
--- reload1.c	30 Sep 2002 19:35:16 -0000	1.358
+++ reload1.c	9 Oct 2002 19:04:27 -0000
@@ -1167,6 +1167,17 @@ reload (first, global)
 		    = MEM_SCALAR_P (reg) = 0;
 		  MEM_ATTRS (reg) = 0;
 		}
+
+#ifdef CALL_REALLY_USED_REGISTERS
+	      /* The arg pointer register may not be really call used on
+		 targets that copy the incoming arg pointer to a call-saved
+		 fixed register.  In this case, the target needs to know
+		 whether or not the arg pointer register is ever live.  */
+	      if (!call_really_used_regs[ARG_POINTER_REGNUM]
+		  && !regs_ever_live[ARG_POINTER_REGNUM]
+		  && reg_mentioned_p (arg_pointer_rtx, addr))
+		regs_ever_live[ARG_POINTER_REGNUM] = 1;
+#endif
 	    }
 	  else if (reg_equiv_mem[i])
 	    XEXP (reg_equiv_mem[i], 0) = addr;

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Wed, Oct 23, 2002 at 04:33:50PM -0400, John David Anglin wrote:
> 	* reload1.c (reload): Make the arg pointer register live if the memory
> 	address that is used to eliminate a pseudo mentions it.

Why would this not be set earlier?


r~

Re: Reload patch for PA call rewrite.

[John David Anglin]

> On Wed, Oct 23, 2002 at 04:33:50PM -0400, John David Anglin wrote:
> > 	* reload1.c (reload): Make the arg pointer register live if the memory
> > 	address that is used to eliminate a pseudo mentions it.
> 
> Why would this not be set earlier?

Most times it is.  However, I found in testing that sometimes this
substitution is in fact the first explicit use of the arg pointer.
Up to this point, we have a pseudo with a REG_EQUIV note and this
doesn't make the register live.

This problem is probably hidden when the arg pointer can be
eliminated as the stack or frame pointer is used instead.  However,
we can't eliminate it on hppa64 because the outgoing arg pointer in
a function call is set based on the cumulative size of the outgoing
args of the callee and this varies from one callee to another.

The reason I need to know whether the arg pointer register is live
or not is to determine whether I need to save the register used for
the arg pointer and copy the incoming arg pointer to it.  The saved
value is restored in the prologue.  We still are ABI compatible and
inter-operate with HP compiled code since we save and restore the
register used for the arg pointer across function calls.

We need to use a fixed register for the arg pointer for tail and
sibling calls to work.  We have no free call-clobbered registers
that could be fixed.  Thus, a call-saved register must be used for
the arg pointer if we want tail and sibling calls to work.  I wasn't
sure that this would provide improved performance but it does seem
to help.  From looking at the code, I am sure tail calls help but
I am less sure about sibcalls.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Jeff Law]

 In message <200210241822.g9OIM8gA026334@hiauly1.hia.nrc.ca>, "John David 
Anglin
 >the arg pointer if we want tail and sibling calls to work.  I wasn't
 >sure that this would provide improved performance but it does seem
 >to help.  From looking at the code, I am sure tail calls help but
 >I am less sure about sibcalls.
This is a legitimate concern.

Eliminating self recursion is almost definitely going to be a win.

Eliminating a generic tail call may be a lose, particularly on processors
which use a branch target stack as the call/return sites no longer match
perfectly -- thus causing a branch mis-predict penalty when the callee
returns.  This was something I've always wanted to measure for modern
PAs and ia32 implementations, but never got around to doing so.

Jeff

Re: Reload patch for PA call rewrite.

[John David Anglin]

> Eliminating a generic tail call may be a lose, particularly on processors
> which use a branch target stack as the call/return sites no longer match
> perfectly -- thus causing a branch mis-predict penalty when the callee
> returns.  This was something I've always wanted to measure for modern
> PAs and ia32 implementations, but never got around to doing so.

As far as I can tell, we currently don't implement the branch target
stack feature.  I can see that with my proposed PA2.0 additions to
various call sequences that this wouldn't be too hard to add.

Jeff, do you know which PA processors implement the branch target feature?

My concern about sibcalls was more basic.  We can't share frames
between the sibcall callee and caller.  So, the overhead for a sibcall
and regular call are essentially the same.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Jeff Law]

 In message <200210241848.g9OIm8b3026422@hiauly1.hia.nrc.ca>, "John David 
Anglin" writes:
 >As far as I can tell, we currently don't implement the branch target
 >stack feature.  I can see that with my proposed PA2.0 additions to
 >various call sequences that this wouldn't be too hard to add.
FWIW, most processors which have this capability do it implicitly -- the
PA is the oddball here in that you have to enable the BTS by using
special opcodes for the branch/return.

Unfortunately I don't have information on what specific models of the PA8000
series implement the branch target stack.

 >My concern about sibcalls was more basic.  We can't share frames
 >between the sibcall callee and caller.  So, the overhead for a sibcall
 >and regular call are essentially the same.
That certainly lesses the potential benefits of sibcalls.  If you can't
share frames, then how can sibcalls work at all?

jeff

Re: Reload patch for PA call rewrite.

[John David Anglin]

>  >My concern about sibcalls was more basic.  We can't share frames
>  >between the sibcall callee and caller.  So, the overhead for a sibcall
>  >and regular call are essentially the same.
> That certainly lesses the potential benefits of sibcalls.  If you can't
> share frames, then how can sibcalls work at all?

That's a good question.  Currently, sibcall_epilogue just calls
hppa_expand_epilogue.  This causes all registers to be restored
and the stack adjusted.  Then, the sibcall is made and a new set
of registers are saved.  This is identical to what happens in
a regular call.  So, there is no benefit as far as I can see.

Ia64 seems to do pretty much the same as we do.

In the case of recursive tail calls, we do share the same frame
so there is a clear benefit.  That's the main benefit in using
a fixed arg pointer as opposed to one that's not fixed.

I did see a small but consistent improvement in the running time
of genattrtab with sibcalls enabled.  I don't know where this arises
but I doubt it is from any saving in the call sequence itself.
There are small differences in how the delay slot is used.  For
regular calls, we use a branch and link, and for sibcalls, we just
branch.  That's the sum of the differences as I see it.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Thu, Oct 24, 2002 at 05:49:09PM -0400, John David Anglin wrote:
> So, there is no benefit as far as I can see.

The benefit is

  (1) you have popped the local variables from the caller, 
      and so you've reduced the total stack space required.

  (2) you return directly to the caller's caller, which
      eliminates the little hunk of code in which we load
      the return address from memory and immediately use it
      to branch again.  In this little hunk we've got nothing
      to do but wait for memory latency.


r~

Re: Reload patch for PA call rewrite.

[John David Anglin]

>  In message <200210241848.g9OIm8b3026422@hiauly1.hia.nrc.ca>, "John David 
> Anglin" writes:
>  >As far as I can tell, we currently don't implement the branch target
>  >stack feature.  I can see that with my proposed PA2.0 additions to
>  >various call sequences that this wouldn't be too hard to add.
> FWIW, most processors which have this capability do it implicitly -- the
> PA is the oddball here in that you have to enable the BTS by using
> special opcodes for the branch/return.
> 
> Unfortunately I don't have information on what specific models of the PA8000
> series implement the branch target stack.

I have it from HP that there are no processors that implement the explicit
BTS opcodes described in the Kane book and that it is highly unlikely that
any future processors will have this feature.  However, there are PA
processors have a completely hardware managed BTS.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Jeff Law]

 In message <200211152205.gAFM5920015687@hiauly1.hia.nrc.ca>, "John David 
Anglin
" writes:
 >I have it from HP that there are no processors that implement the explicit
 >BTS opcodes described in the Kane book and that it is highly unlikely that
 >any future processors will have this feature.  However, there are PA
 >processors have a completely hardware managed BTS.
For the hardware managed BTS machines we should probably disable sibling
call optimizations as they'll scrog the BTS.

jeff

Re: Reload patch for PA call rewrite.

[John David Anglin]

> For the hardware managed BTS machines we should probably disable sibling
> call optimizations as they'll scrog the BTS.

I think that depends on how they push the return pointer.  I'll see if
I can find out which processors have the feature.

In testing, I have noted one further complication regarding sibcalls
on hppa64-hpux.  If you build and install a compiler using the HP
linker and then try to do a bootstrap using the GNU linker, the build
will fail unless sibcalls are disabled because of the poor placement
of stubs using the GNU linker.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Zack Weinberg]

On Sun, 2002-11-17 at 15:48, Jeff Law wrote:
> For the hardware managed BTS machines we should probably disable sibling
> call optimizations as they'll scrog the BTS.

I don't see how this would happen.  Sibcall optimization takes

a:
	...
	call b
	ret

b:
	...
	ret

and turns it into

a:
	...
	jmp b

b:
	...
	ret

Afterward, it's as if there was one long function with an unconditional
jump in the middle.  How does this scrog the BTS?

zw

Re: Reload patch for PA call rewrite.

[John David Anglin]

> On Sun, 2002-11-17 at 15:48, Jeff Law wrote:
> > For the hardware managed BTS machines we should probably disable sibling
> > call optimizations as they'll scrog the BTS.
> 
> I don't see how this would happen.  Sibcall optimization takes
> 
> a:
> 	...
> 	call b
> 	ret
> 
> b:
> 	...
> 	ret
> 
> and turns it into
> 
> a:
> 	...
> 	jmp b
> 
> b:
> 	...
> 	ret
> 
> Afterward, it's as if there was one long function with an unconditional
> jump in the middle.  How does this scrog the BTS?

"jmp b" and "ret" may be the same machine instruction.  The PA
architecture has a collection of branch instructions, but no
iexplicit call or ret instructions.  Thus, the jmp might scrog
the BTS.

The machine definition currently does short sibcalls using a
"B,L target,%r0" where %r0 is the link register.  As register %r0 is
a fixed 0, we are throwing away the link value in the sibcall.  This
instruction probably will not confuse the BTS hardware.  However, for
long sibcalls, we use the "BVE (b)" instruction.  This instruction is
also used for for function returns.  So, the hardware might have
some difficulty determining when to pop the BTS.  Possibly, only a
"BVE (%r2)" will pop the BTS and "BVE (%r1)" won't.  We use the former
for returns and the latter for long sibcalls.  However, I don't have
any information on how the hardware actually BTS works.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Sun, Nov 17, 2002 at 04:48:38PM -0700, Jeff Law wrote:
> For the hardware managed BTS machines we should probably disable sibling
> call optimizations as they'll scrog the BTS.

I can't believe this is true.  Please explain to me why

	push
	push
	pop
	pop

maintains a stack while

	push
	jump
	pop

doesn't.


r~

Re: Reload patch for PA call rewrite.

[John David Anglin]

> I can't believe this is true.  Please explain to me why
> 
> 	push
> 	push
> 	pop
> 	pop
> 
> maintains a stack while
> 
> 	push
> 	jump
> 	pop
> 
> doesn't.

We don't have any documentation on how the PA hardware-manged BTS works.
All seven instructions in your example are branch instructions of one
flavor or another and we don't know specifically which instructions
affect the stack.  If "jump" was implemented as

	copy %rp,%r1
	b,l target,%rp
	copy %r1,%rp

what happens to the stack?  This might be useful for an intermediate
range sibcall since the maximum branch distance is a factor 32 larger
than a "b target" instruction.  However, it might push the stack.

With the BVE instruction, you want it to push in some situations,
pop in others, and not affect the stack in others.  The PA 2.0
architecture defines insn completers to specify what happens to the
BTS but they haven't been implemented.  Although I can guess what
might have been done in the fully hardware implementation, I don't
know for certain.

With our current call sequences, I doubt that sibcalls scrog the stack
as the "jump" implementation doesn't mention %rp (the return pointer).

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Thu, Oct 24, 2002 at 12:44:34PM -0600, Jeff Law wrote:
> Eliminating a generic tail call may be a lose, particularly on processors
> which use a branch target stack as the call/return sites no longer match
> perfectly

This is incorrect.  The return target stack is still intact.

Consider a()->b()->c().  If there are no tail calls, then
in C, the return stack is two deep, and we pop them both off
with two return instructions.  If B tail calls, then in C the
return stack is only one deep, and we pop that one off with
one return instruction.

I suppose it could make a difference to targets that don't
have a separate return instruction, and whose architecture
doesn't suggest a canonical return register.  (Examples of
the later is MIPS (indirect branch with r31) and PPC
(indirect branch with lr)).  I don't know how PA treats this.


r~

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Wed, Oct 23, 2002 at 04:33:50PM -0400, John David Anglin wrote:
> 	* reload1.c (reload): Make the arg pointer register live if the memory
> 	address that is used to eliminate a pseudo mentions it.

This patch isn't correct.  You're doing this too late.  If
the argument pointer isn't live at this point, you won't have
allocated a spill slot for it, which means you'll have to add
one, which means that all your elimination offsets change.

You need to have this happen inside the something_changed
loop earlier in reload.


r~

Re: Reload patch for PA call rewrite.

[John David Anglin]

> On Wed, Oct 23, 2002 at 04:33:50PM -0400, John David Anglin wrote:
> > 	* reload1.c (reload): Make the arg pointer register live if the memory
> > 	address that is used to eliminate a pseudo mentions it.
> 
> This patch isn't correct.  You're doing this too late.  If
> the argument pointer isn't live at this point, you won't have
> allocated a spill slot for it, which means you'll have to add
> one, which means that all your elimination offsets change.

Why do I need a spill lot for a fixed register?

I guess you point is that if this occurs on a target where the arg
pointer isn't fixed then there will be a problem because a spill
slot hasn't been allocated.  However, in that case, function.c copies
the arg pointer to a pseudo.  Won't that create a slot for it?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Fri, Oct 25, 2002 at 07:53:24PM -0400, John David Anglin wrote:
> Why do I need a spill lot for a fixed register?

Because it's call-saved, and you have to save and restore it somewhere.  


r~

Re: Reload patch for PA call rewrite.

[John David Anglin]

> On Fri, Oct 25, 2002 at 07:53:24PM -0400, John David Anglin wrote:
> > Why do I need a spill lot for a fixed register?
> 
> Because it's call-saved, and you have to save and restore it somewhere.  

This is done in the prologue after reload along with all the other
call-saved registers.  The frame size isn't determined until then.
We can't eliminate the arg pointer.  This seems to work fine for
the elimination of the frame pointer.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Fri, Oct 25, 2002 at 08:20:20PM -0400, John David Anglin wrote:
> This is done in the prologue after reload along with all the other
> call-saved registers.  The frame size isn't determined until then.

Huh?  How can that be?  You've got to know how large your 
stack frame is...  The definition of virtual_cfa_rtx must
must be wrong for pa64.  So does dwarf2 EH work at all?


r~

Re: Reload patch for PA call rewrite.

[John David Anglin]

> Huh?  How can that be?  You've got to know how large your 
> stack frame is...  The definition of virtual_cfa_rtx must
> must be wrong for pa64.  So does dwarf2 EH work at all?

Not yet.  It's using sjlj exceptions at this point.  There
are still issues with the linker.  In fact, the arg pointer
offset to the stack pointer is not related to the frame size
but to the cumulative size of the outing args of the caller
which of course varies from one caller to another (and
compiler as the HP compiler does this slightly differently
than gcc).

The hppa-linux port is using dwarf2 EH.  It seems to work.
The only problem that I am aware of that might be related is
PR c++/8329 but this also was a problem before the dwarf2
implementation.  The difference there is that args grow
downward, so the offset to the first arg can always be
determined from the stack pointer.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Fri, Oct 25, 2002 at 08:20:20PM -0400, John David Anglin wrote:
> > Because it's call-saved, and you have to save and restore it somewhere.  
> 
> This is done in the prologue after reload along with all the other
> call-saved registers.  The frame size isn't determined until then.

In any case, no matter how frames are allocated on PA, on most
other targets the register spill area is allocated and adjusted
during the something_changed loop.  IMO it's wrong for us to be
modifying register life data after that loop.


r~

Re: Reload patch for PA call rewrite.

[John David Anglin]

> In any case, no matter how frames are allocated on PA, on most
> other targets the register spill area is allocated and adjusted
> during the something_changed loop.  IMO it's wrong for us to be
> modifying register life data after that loop.

My question in that case is how do I determine whether or not the arg
pointer will actually be needed at an earlier point?

From what you have said, it is quite likely that we are allocating the
register spill area twice (something_change_loop and PA prologue).

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Fri, Oct 25, 2002 at 09:07:01PM -0400, John David Anglin wrote:
> My question in that case is how do I determine whether or not the arg
> pointer will actually be needed at an earlier point?

I'd expect that you could examine the reloads created by
find_reloads when called from calculate_needs_all_insns.


r~

Re: Reload patch for PA call rewrite.

[John David Anglin]

> On Fri, Oct 25, 2002 at 09:07:01PM -0400, John David Anglin wrote:
> > My question in that case is how do I determine whether or not the arg
> > pointer will actually be needed at an earlier point?
> 
> I'd expect that you could examine the reloads created by
> find_reloads when called from calculate_needs_all_insns.

This is what I came up with.  After the arg pointer is spilled,
it will not be used as a reload register.  Thus, I don't think
that there are any circumstances in which a reload will make the
register live.  The only way it can become live is if a pseudo
with an equivalence that mentions the arg pointer doesn't get a
hard register.  So, I wrote a small routine to check for equivalences
that mention the arg pointer and set regs_ever_live for arg pointer
in the something changed_loop based on the result.

Tested with no regressions on hppa64-hp-hpux11.11.  The patch
definitely provides an improvement in performance when combined with
the PA backend patch to copy the incoming arg pointer to the new
fixed arg pointer.  So, I definitely think it is worthwhile.

Ok for main?

Dave
--
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-11-02  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* reload1.c (reg_mentioned_in_equivs_p): New function.
	(reload): When the arg pointer is not eliminable, spill it and add it
	to the bad_spill_regs_global set.  If it is also not initially live,
	set regs_ever_live for the arg pointer in the something_changed loop
	to a state which which reflects whether or not it is mentioned in the
	equivalences for the remaining pseudos.  

Index: reload1.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/reload1.c,v
retrieving revision 1.363
diff -u -3 -p -r1.363 reload1.c
--- reload1.c	29 Oct 2002 17:47:12 -0000	1.363
+++ reload1.c	2 Nov 2002 20:22:54 -0000
@@ -367,6 +367,7 @@ static int num_labels;
 static void replace_pseudos_in_call_usage	PARAMS ((rtx *,
 							 enum machine_mode,
 							 rtx));
+static int reg_mentioned_in_equivs_p	PARAMS ((rtx));
 static void maybe_fix_stack_asms	PARAMS ((void));
 static void copy_reloads		PARAMS ((struct insn_chain *));
 static void calculate_needs_all_insns	PARAMS ((int));
@@ -668,6 +669,8 @@ reload (first, global)
      rtx first;
      int global;
 {
+  int arg_pointer_eliminable = 0;
+  int arg_pointer_init_ever_live;
   int i;
   rtx insn;
   struct elim_table *ep;
@@ -903,8 +906,24 @@ reload (first, global)
   if (frame_pointer_needed)
     spill_hard_reg (HARD_FRAME_POINTER_REGNUM, 1);
 #endif
+
+  /* The arg pointer needs special treatment when it is not eliminable.  */
+  for (ep = reg_eliminate; ep < &reg_eliminate[NUM_ELIMINABLE_REGS]; ep++)
+    if (ep->from == ARG_POINTER_REGNUM)
+      arg_pointer_eliminable = 1;
+
+  if (!arg_pointer_eliminable)
+    {
+      /* Kick pseudos out and make sure that the arg pointer is not used
+	 as a spill register.  */
+      spill_hard_reg (ARG_POINTER_REGNUM, 0);
+      SET_HARD_REG_BIT (bad_spill_regs_global, ARG_POINTER_REGNUM);
+    }
+
   finish_spills (global);
 
+  arg_pointer_init_ever_live = regs_ever_live[ARG_POINTER_REGNUM];
+
   /* From now on, we may need to generate moves differently.  We may also
      allow modifications of insns which cause them to not be recognized.
      Any such modifications will be cleaned up during reload itself.  */
@@ -1035,6 +1054,31 @@ reload (first, global)
 	    }
       }
 
+      /* When the arg pointer is both not eliminable and not initially
+	 ever live, we have to check whether there are any pseudos with
+	 equivalences that mention the arg pointer.  If there are, we
+	 need to treat the arg pointer as live as they will make the
+	 arg pointer live when they are substituted.  */
+      if (!arg_pointer_eliminable && !arg_pointer_init_ever_live)
+	{
+	  if (reg_mentioned_in_equivs_p (arg_pointer_rtx))
+	    {
+	      if (!regs_ever_live[ARG_POINTER_REGNUM])
+		{
+		  regs_ever_live[ARG_POINTER_REGNUM] = 1;
+		  something_changed = 1;
+		}
+	    }
+	  else
+	    {
+	      if (regs_ever_live[ARG_POINTER_REGNUM])
+		{
+		  regs_ever_live[ARG_POINTER_REGNUM] = 0;
+		  something_changed = 1;
+		}
+	    }
+	}
+
       select_reload_regs ();
       if (failure)
 	goto failed;
@@ -1293,6 +1337,32 @@ reload (first, global)
   unshare_all_rtl_again (first);
 
   return failure;
+}
+
+/* Return 1 if the register REG is mentioned in the equivalent mem or
+   address of any pseudo.  Otherwise, 0 is returned.  */
+static int
+reg_mentioned_in_equivs_p (reg)
+     rtx reg;
+{
+  int i;
+
+  for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++)
+    if (reg_renumber[i] < 0)
+      {
+	rtx addr = 0;
+
+	if (reg_equiv_mem[i])
+	  addr = XEXP (reg_equiv_mem[i], 0);
+
+	if (reg_equiv_address[i])
+	  addr = reg_equiv_address[i];
+
+	if (addr && reg_mentioned_p (reg, addr))
+	  return 1;
+      }
+
+  return 0;
 }
 
 /* Yet another special case.  Unfortunately, reg-stack forces people to

Re: Reload patch for PA call rewrite.

[John David Anglin]

> On Wed, Oct 23, 2002 at 04:33:50PM -0400, John David Anglin wrote:
> > 	* reload1.c (reload): Make the arg pointer register live if the memory
> > 	address that is used to eliminate a pseudo mentions it.
> 
> This patch isn't correct.  You're doing this too late.  If
> the argument pointer isn't live at this point, you won't have
> allocated a spill slot for it, which means you'll have to add
> one, which means that all your elimination offsets change.

This really isn't a problem although there was a problem with my
backend patch in this respect.  The backend simply has to always
allocate a slot so that that the elimination offsets are independent
of whether the arg pointer is live or not.

> You need to have this happen inside the something_changed
> loop earlier in reload.

I did some further investigation of this and there doesn't appear
to be a simple change to do this.  If I make the arg pointer an
eliminable register that can't be eliminated, spill_hard_reg
unconditionally makes it live.  This causes my backend code to
unconditionally save the arg pointer register, copy the incoming
arg pointer to the arg pointer, and then restore the arg pointer.
The overhead of this is significant in small functions and much
of the benefit in having tail calls is lost.

I experimented with not making the arg pointer unconditionally
live and still spilling it.  However, then I end up with the same
situation as when the arg pointer isn't an eliminable register.
The arg pointer can implicitly become alive when an incoming
argument is copied to a pseudo and that pseudo doesn't get a
hard register.  The only possible solutions to this are 1) somehow
move the final pseudo substition into the something_changed loop,
or 2) allocate slots for incoming arguments using the frame pointer.
I don't think 1) is possible as you don't know whether the pseudo
will get a hard register until the loop completes.  2) wastes stack
space as the PA64 ABI already reserves stack slots for the incoming
arguments in registers, albeit relative to the arg pointer.

So, I'm back to more or less my original patch with some modified
commentary.  I would argue that it can't be wrong to set regs_ever_live
for the arg pointer when the arg pointer is in fact live at some point
in the function.  If this somehow changes elimination offsets, that's
really a problem in the backend.  We could abort if this happens and
insist that the arg pointer be in the set of eliminable registers.
This would ensure that it is always spilled and alive when it can't
be eliminated.  However, I then would have to do a brute force scan
in the prologue to determine if the arg pointer is ever used.

Do you see any other approach?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

2002-10-30  John David Anglin  <dave@hiauly1.hia.nrc.ca>

	* reload1.c (reload): Make the arg pointer live if it used in a
	substituted MEM.
	* doc/tm.texi (ARG_POINTER_REGNUM): Document that elimination offsets
	should not depend on the aliveness of the arg pointer when it is not
	an eliminable register.

Index: reload1.c
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/reload1.c,v
retrieving revision 1.363
diff -u -3 -p -r1.363 reload1.c
--- reload1.c	29 Oct 2002 17:47:12 -0000	1.363
+++ reload1.c	30 Oct 2002 19:17:16 -0000
@@ -1167,6 +1167,15 @@ reload (first, global)
 		    = MEM_SCALAR_P (reg) = 0;
 		  MEM_ATTRS (reg) = 0;
 		}
+
+	      /* The substitution may have made the arg pointer live if
+		 it isn't an eliminable register.  The target must ensure
+		 that the elimination offsets do not change when this
+		 happens as we are past the point where the offsets can
+		 change.  */
+	      if (!regs_ever_live[ARG_POINTER_REGNUM]
+		  && reg_mentioned_p (arg_pointer_rtx, addr))
+		regs_ever_live[ARG_POINTER_REGNUM] = 1;
 	    }
 	  else if (reg_equiv_mem[i])
 	    XEXP (reg_equiv_mem[i], 0) = addr;
Index: doc/tm.texi
===================================================================
RCS file: /cvsroot/gcc/gcc/gcc/doc/tm.texi,v
retrieving revision 1.179
diff -u -3 -p -r1.179 tm.texi
--- doc/tm.texi	20 Oct 2002 18:52:01 -0000	1.179
+++ doc/tm.texi	30 Oct 2002 19:17:22 -0000
@@ -3103,7 +3103,10 @@ frame pointer register.  On some machine
 register this is.  On other machines, you can choose any register you
 wish for this purpose.  If this is not the same register as the frame
 pointer register, then you must mark it as a fixed register according to
-@code{FIXED_REGISTERS}, or arrange to be able to eliminate it
+@code{FIXED_REGISTERS}, or arrange to be able to eliminate it.  If you
+don't define it as an eliminable register in @code{ELIMINABLE_REGS},
+then the backend must ensure that the elimination offsets do not depend
+on the liveness of the register
 (@pxref{Elimination}).
 
 @findex RETURN_ADDRESS_POINTER_REGNUM

Re: Reload patch for PA call rewrite.

[Richard Henderson]

On Wed, Oct 30, 2002 at 03:03:15PM -0500, John David Anglin wrote:
> This really isn't a problem although there was a problem with my
> backend patch in this respect.  The backend simply has to always
> allocate a slot so that that the elimination offsets are independent
> of whether the arg pointer is live or not.

This would mean that no leaf functions would ever have an
empty stack frame.  Badness.

> I did some further investigation of this and there doesn't appear
> to be a simple change to do this.  If I make the arg pointer an
> eliminable register that can't be eliminated...

No, this is not the tack I was indicating.  See the other
message I sent a moment ago.



r~

Re: Reload patch for PA call rewrite.

[John David Anglin]

> This would mean that no leaf functions would ever have an
> empty stack frame.  Badness.

Ah yes, you are correct.  There are a couple of extra instructions in a
leaf function.  I am tempted to store the arg pointer in the callers frame.
The HP compiler seems to allocate four extra slots beyond the two listed
in the ABI for the return pointer and previous stack pointer, so there
probably wouldn't be a problem in using one them.  However, I will take a
look at your suggestion.

I have been pondering whether the arg pointer needs to be spilled when
it is not an eliminable register.  This isn't done now.  However,
reload spills eliminable registers when they can't be eliminated.
So, is it necessary in this situation?

When the register is fixed, I don't think it is necessary unless it
is possible for overlaps to occur.  There never seem to be any pseudos
assigned directly when the register is fixed.  Overlaps couldn't occur
in the configuration that I was testing because I selected an even
register for the arg pointer and wide modes are constrained to start
on an even register.  If it is generally true that overlaps don't occur
when the register is fixed, then spill_hard_reg doesn't need to make
a pass through the pseudos when it is dealing with a fixed register.

In the current situation where it is not fixed, spilling appears to
result in a slight performance reduction although this is is based on
a rather limited amount of testing.  I am concerned that since the
register is used for multiple purposes and instantiate_new_reg
instantiates virtual_incoming_args_rtx using the arg_pointer_rtx
that there could be conficts.  However, I have never observed any.
Do you have an opinion on this?

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)